4 * Copyright 2002-2005, Instant802 Networks, Inc.
5 * Copyright 2005-2006, Devicescape Software, Inc.
6 * Copyright (c) 2006 Jiri Benc <jbenc@suse.cz>
7 * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
13 #include <linux/slab.h>
14 #include <linux/kernel.h>
15 #include <linux/if_arp.h>
16 #include <linux/netdevice.h>
17 #include <linux/rtnetlink.h>
18 #include <net/mac80211.h>
19 #include <net/ieee80211_radiotap.h>
20 #include "ieee80211_i.h"
22 #include "debugfs_netdev.h"
25 #include "driver-ops.h"
30 * DOC: Interface list locking
32 * The interface list in each struct ieee80211_local is protected
35 * (1) modifications may only be done under the RTNL
36 * (2) modifications and readers are protected against each other by
38 * (3) modifications are done in an RCU manner so atomic readers
39 * can traverse the list in RCU-safe blocks.
41 * As a consequence, reads (traversals) of the list can be protected
42 * by either the RTNL, the iflist_mtx or RCU.
45 bool __ieee80211_recalc_txpower(struct ieee80211_sub_if_data
*sdata
)
47 struct ieee80211_chanctx_conf
*chanctx_conf
;
51 chanctx_conf
= rcu_dereference(sdata
->vif
.chanctx_conf
);
57 power
= ieee80211_chandef_max_power(&chanctx_conf
->def
);
60 if (sdata
->user_power_level
!= IEEE80211_UNSET_POWER_LEVEL
)
61 power
= min(power
, sdata
->user_power_level
);
63 if (sdata
->ap_power_level
!= IEEE80211_UNSET_POWER_LEVEL
)
64 power
= min(power
, sdata
->ap_power_level
);
66 if (power
!= sdata
->vif
.bss_conf
.txpower
) {
67 sdata
->vif
.bss_conf
.txpower
= power
;
68 ieee80211_hw_config(sdata
->local
, 0);
75 void ieee80211_recalc_txpower(struct ieee80211_sub_if_data
*sdata
)
77 if (__ieee80211_recalc_txpower(sdata
))
78 ieee80211_bss_info_change_notify(sdata
, BSS_CHANGED_TXPOWER
);
81 static u32
__ieee80211_idle_off(struct ieee80211_local
*local
)
83 if (!(local
->hw
.conf
.flags
& IEEE80211_CONF_IDLE
))
86 local
->hw
.conf
.flags
&= ~IEEE80211_CONF_IDLE
;
87 return IEEE80211_CONF_CHANGE_IDLE
;
90 static u32
__ieee80211_idle_on(struct ieee80211_local
*local
)
92 if (local
->hw
.conf
.flags
& IEEE80211_CONF_IDLE
)
95 ieee80211_flush_queues(local
, NULL
);
97 local
->hw
.conf
.flags
|= IEEE80211_CONF_IDLE
;
98 return IEEE80211_CONF_CHANGE_IDLE
;
101 static u32
__ieee80211_recalc_idle(struct ieee80211_local
*local
,
104 bool working
= false, scanning
, active
;
105 unsigned int led_trig_start
= 0, led_trig_stop
= 0;
106 struct ieee80211_roc_work
*roc
;
108 lockdep_assert_held(&local
->mtx
);
110 active
= force_active
||
111 !list_empty(&local
->chanctx_list
) ||
114 if (!local
->ops
->remain_on_channel
) {
115 list_for_each_entry(roc
, &local
->roc_list
, list
) {
121 scanning
= test_bit(SCAN_SW_SCANNING
, &local
->scanning
) ||
122 test_bit(SCAN_ONCHANNEL_SCANNING
, &local
->scanning
);
124 if (working
|| scanning
)
125 led_trig_start
|= IEEE80211_TPT_LEDTRIG_FL_WORK
;
127 led_trig_stop
|= IEEE80211_TPT_LEDTRIG_FL_WORK
;
130 led_trig_start
|= IEEE80211_TPT_LEDTRIG_FL_CONNECTED
;
132 led_trig_stop
|= IEEE80211_TPT_LEDTRIG_FL_CONNECTED
;
134 ieee80211_mod_tpt_led_trig(local
, led_trig_start
, led_trig_stop
);
136 if (working
|| scanning
|| active
)
137 return __ieee80211_idle_off(local
);
138 return __ieee80211_idle_on(local
);
141 u32
ieee80211_idle_off(struct ieee80211_local
*local
)
143 return __ieee80211_recalc_idle(local
, true);
146 void ieee80211_recalc_idle(struct ieee80211_local
*local
)
148 u32 change
= __ieee80211_recalc_idle(local
, false);
150 ieee80211_hw_config(local
, change
);
153 static int ieee80211_change_mtu(struct net_device
*dev
, int new_mtu
)
155 if (new_mtu
< 256 || new_mtu
> IEEE80211_MAX_DATA_LEN
)
162 static int ieee80211_verify_mac(struct ieee80211_sub_if_data
*sdata
, u8
*addr
,
165 struct ieee80211_local
*local
= sdata
->local
;
166 struct ieee80211_sub_if_data
*iter
;
171 if (is_zero_ether_addr(local
->hw
.wiphy
->addr_mask
))
175 new = ((u64
)m
[0] << 5*8) | ((u64
)m
[1] << 4*8) |
176 ((u64
)m
[2] << 3*8) | ((u64
)m
[3] << 2*8) |
177 ((u64
)m
[4] << 1*8) | ((u64
)m
[5] << 0*8);
179 m
= local
->hw
.wiphy
->addr_mask
;
180 mask
= ((u64
)m
[0] << 5*8) | ((u64
)m
[1] << 4*8) |
181 ((u64
)m
[2] << 3*8) | ((u64
)m
[3] << 2*8) |
182 ((u64
)m
[4] << 1*8) | ((u64
)m
[5] << 0*8);
187 mutex_lock(&local
->iflist_mtx
);
188 list_for_each_entry(iter
, &local
->interfaces
, list
) {
192 if (iter
->vif
.type
== NL80211_IFTYPE_MONITOR
&&
193 !(iter
->u
.mntr_flags
& MONITOR_FLAG_ACTIVE
))
197 tmp
= ((u64
)m
[0] << 5*8) | ((u64
)m
[1] << 4*8) |
198 ((u64
)m
[2] << 3*8) | ((u64
)m
[3] << 2*8) |
199 ((u64
)m
[4] << 1*8) | ((u64
)m
[5] << 0*8);
201 if ((new & ~mask
) != (tmp
& ~mask
)) {
206 mutex_unlock(&local
->iflist_mtx
);
211 static int ieee80211_change_mac(struct net_device
*dev
, void *addr
)
213 struct ieee80211_sub_if_data
*sdata
= IEEE80211_DEV_TO_SUB_IF(dev
);
214 struct sockaddr
*sa
= addr
;
215 bool check_dup
= true;
218 if (ieee80211_sdata_running(sdata
))
221 if (sdata
->vif
.type
== NL80211_IFTYPE_MONITOR
&&
222 !(sdata
->u
.mntr_flags
& MONITOR_FLAG_ACTIVE
))
225 ret
= ieee80211_verify_mac(sdata
, sa
->sa_data
, check_dup
);
229 ret
= eth_mac_addr(dev
, sa
);
232 memcpy(sdata
->vif
.addr
, sa
->sa_data
, ETH_ALEN
);
237 static inline int identical_mac_addr_allowed(int type1
, int type2
)
239 return type1
== NL80211_IFTYPE_MONITOR
||
240 type2
== NL80211_IFTYPE_MONITOR
||
241 type1
== NL80211_IFTYPE_P2P_DEVICE
||
242 type2
== NL80211_IFTYPE_P2P_DEVICE
||
243 (type1
== NL80211_IFTYPE_AP
&& type2
== NL80211_IFTYPE_WDS
) ||
244 (type1
== NL80211_IFTYPE_WDS
&&
245 (type2
== NL80211_IFTYPE_WDS
||
246 type2
== NL80211_IFTYPE_AP
)) ||
247 (type1
== NL80211_IFTYPE_AP
&& type2
== NL80211_IFTYPE_AP_VLAN
) ||
248 (type1
== NL80211_IFTYPE_AP_VLAN
&&
249 (type2
== NL80211_IFTYPE_AP
||
250 type2
== NL80211_IFTYPE_AP_VLAN
));
253 static int ieee80211_check_concurrent_iface(struct ieee80211_sub_if_data
*sdata
,
254 enum nl80211_iftype iftype
)
256 struct ieee80211_local
*local
= sdata
->local
;
257 struct ieee80211_sub_if_data
*nsdata
;
261 /* we hold the RTNL here so can safely walk the list */
262 list_for_each_entry(nsdata
, &local
->interfaces
, list
) {
263 if (nsdata
!= sdata
&& ieee80211_sdata_running(nsdata
)) {
265 * Allow only a single IBSS interface to be up at any
266 * time. This is restricted because beacon distribution
267 * cannot work properly if both are in the same IBSS.
269 * To remove this restriction we'd have to disallow them
270 * from setting the same SSID on different IBSS interfaces
271 * belonging to the same hardware. Then, however, we're
272 * faced with having to adopt two different TSF timers...
274 if (iftype
== NL80211_IFTYPE_ADHOC
&&
275 nsdata
->vif
.type
== NL80211_IFTYPE_ADHOC
)
278 * will not add another interface while any channel
281 if (nsdata
->vif
.csa_active
)
285 * The remaining checks are only performed for interfaces
286 * with the same MAC address.
288 if (!ether_addr_equal(sdata
->vif
.addr
,
293 * check whether it may have the same address
295 if (!identical_mac_addr_allowed(iftype
,
300 * can only add VLANs to enabled APs
302 if (iftype
== NL80211_IFTYPE_AP_VLAN
&&
303 nsdata
->vif
.type
== NL80211_IFTYPE_AP
)
304 sdata
->bss
= &nsdata
->u
.ap
;
311 static int ieee80211_check_queues(struct ieee80211_sub_if_data
*sdata
,
312 enum nl80211_iftype iftype
)
314 int n_queues
= sdata
->local
->hw
.queues
;
317 if (iftype
!= NL80211_IFTYPE_P2P_DEVICE
) {
318 for (i
= 0; i
< IEEE80211_NUM_ACS
; i
++) {
319 if (WARN_ON_ONCE(sdata
->vif
.hw_queue
[i
] ==
320 IEEE80211_INVAL_HW_QUEUE
))
322 if (WARN_ON_ONCE(sdata
->vif
.hw_queue
[i
] >=
328 if ((iftype
!= NL80211_IFTYPE_AP
&&
329 iftype
!= NL80211_IFTYPE_P2P_GO
&&
330 iftype
!= NL80211_IFTYPE_MESH_POINT
) ||
331 !(sdata
->local
->hw
.flags
& IEEE80211_HW_QUEUE_CONTROL
)) {
332 sdata
->vif
.cab_queue
= IEEE80211_INVAL_HW_QUEUE
;
336 if (WARN_ON_ONCE(sdata
->vif
.cab_queue
== IEEE80211_INVAL_HW_QUEUE
))
339 if (WARN_ON_ONCE(sdata
->vif
.cab_queue
>= n_queues
))
345 void ieee80211_adjust_monitor_flags(struct ieee80211_sub_if_data
*sdata
,
348 struct ieee80211_local
*local
= sdata
->local
;
349 u32 flags
= sdata
->u
.mntr_flags
;
351 #define ADJUST(_f, _s) do { \
352 if (flags & MONITOR_FLAG_##_f) \
353 local->fif_##_s += offset; \
356 ADJUST(FCSFAIL
, fcsfail
);
357 ADJUST(PLCPFAIL
, plcpfail
);
358 ADJUST(CONTROL
, control
);
359 ADJUST(CONTROL
, pspoll
);
360 ADJUST(OTHER_BSS
, other_bss
);
365 static void ieee80211_set_default_queues(struct ieee80211_sub_if_data
*sdata
)
367 struct ieee80211_local
*local
= sdata
->local
;
370 for (i
= 0; i
< IEEE80211_NUM_ACS
; i
++) {
371 if (local
->hw
.flags
& IEEE80211_HW_QUEUE_CONTROL
)
372 sdata
->vif
.hw_queue
[i
] = IEEE80211_INVAL_HW_QUEUE
;
373 else if (local
->hw
.queues
>= IEEE80211_NUM_ACS
)
374 sdata
->vif
.hw_queue
[i
] = i
;
376 sdata
->vif
.hw_queue
[i
] = 0;
378 sdata
->vif
.cab_queue
= IEEE80211_INVAL_HW_QUEUE
;
381 int ieee80211_add_virtual_monitor(struct ieee80211_local
*local
)
383 struct ieee80211_sub_if_data
*sdata
;
386 if (!(local
->hw
.flags
& IEEE80211_HW_WANT_MONITOR_VIF
))
391 if (local
->monitor_sdata
)
394 sdata
= kzalloc(sizeof(*sdata
) + local
->hw
.vif_data_size
, GFP_KERNEL
);
399 sdata
->local
= local
;
400 sdata
->vif
.type
= NL80211_IFTYPE_MONITOR
;
401 snprintf(sdata
->name
, IFNAMSIZ
, "%s-monitor",
402 wiphy_name(local
->hw
.wiphy
));
404 sdata
->encrypt_headroom
= IEEE80211_ENCRYPT_HEADROOM
;
406 ieee80211_set_default_queues(sdata
);
408 ret
= drv_add_interface(local
, sdata
);
410 /* ok .. stupid driver, it asked for this! */
415 ret
= ieee80211_check_queues(sdata
, NL80211_IFTYPE_MONITOR
);
421 mutex_lock(&local
->iflist_mtx
);
422 rcu_assign_pointer(local
->monitor_sdata
, sdata
);
423 mutex_unlock(&local
->iflist_mtx
);
425 mutex_lock(&local
->mtx
);
426 ret
= ieee80211_vif_use_channel(sdata
, &local
->monitor_chandef
,
427 IEEE80211_CHANCTX_EXCLUSIVE
);
428 mutex_unlock(&local
->mtx
);
430 mutex_lock(&local
->iflist_mtx
);
431 rcu_assign_pointer(local
->monitor_sdata
, NULL
);
432 mutex_unlock(&local
->iflist_mtx
);
434 drv_remove_interface(local
, sdata
);
442 void ieee80211_del_virtual_monitor(struct ieee80211_local
*local
)
444 struct ieee80211_sub_if_data
*sdata
;
446 if (!(local
->hw
.flags
& IEEE80211_HW_WANT_MONITOR_VIF
))
451 mutex_lock(&local
->iflist_mtx
);
453 sdata
= rcu_dereference_protected(local
->monitor_sdata
,
454 lockdep_is_held(&local
->iflist_mtx
));
456 mutex_unlock(&local
->iflist_mtx
);
460 rcu_assign_pointer(local
->monitor_sdata
, NULL
);
461 mutex_unlock(&local
->iflist_mtx
);
465 mutex_lock(&local
->mtx
);
466 ieee80211_vif_release_channel(sdata
);
467 mutex_unlock(&local
->mtx
);
469 drv_remove_interface(local
, sdata
);
475 * NOTE: Be very careful when changing this function, it must NOT return
476 * an error on interface type changes that have been pre-checked, so most
477 * checks should be in ieee80211_check_concurrent_iface.
479 int ieee80211_do_open(struct wireless_dev
*wdev
, bool coming_up
)
481 struct ieee80211_sub_if_data
*sdata
= IEEE80211_WDEV_TO_SUB_IF(wdev
);
482 struct net_device
*dev
= wdev
->netdev
;
483 struct ieee80211_local
*local
= sdata
->local
;
484 struct sta_info
*sta
;
487 u32 hw_reconf_flags
= 0;
489 switch (sdata
->vif
.type
) {
490 case NL80211_IFTYPE_WDS
:
491 if (!is_valid_ether_addr(sdata
->u
.wds
.remote_addr
))
494 case NL80211_IFTYPE_AP_VLAN
: {
495 struct ieee80211_sub_if_data
*master
;
500 list_add(&sdata
->u
.vlan
.list
, &sdata
->bss
->vlans
);
502 master
= container_of(sdata
->bss
,
503 struct ieee80211_sub_if_data
, u
.ap
);
504 sdata
->control_port_protocol
=
505 master
->control_port_protocol
;
506 sdata
->control_port_no_encrypt
=
507 master
->control_port_no_encrypt
;
508 sdata
->vif
.cab_queue
= master
->vif
.cab_queue
;
509 memcpy(sdata
->vif
.hw_queue
, master
->vif
.hw_queue
,
510 sizeof(sdata
->vif
.hw_queue
));
513 case NL80211_IFTYPE_AP
:
514 sdata
->bss
= &sdata
->u
.ap
;
516 case NL80211_IFTYPE_MESH_POINT
:
517 case NL80211_IFTYPE_STATION
:
518 case NL80211_IFTYPE_MONITOR
:
519 case NL80211_IFTYPE_ADHOC
:
520 case NL80211_IFTYPE_P2P_DEVICE
:
521 /* no special treatment */
523 case NL80211_IFTYPE_UNSPECIFIED
:
524 case NUM_NL80211_IFTYPES
:
525 case NL80211_IFTYPE_P2P_CLIENT
:
526 case NL80211_IFTYPE_P2P_GO
:
532 if (local
->open_count
== 0) {
533 res
= drv_start(local
);
536 /* we're brought up, everything changes */
537 hw_reconf_flags
= ~0;
538 ieee80211_led_radio(local
, true);
539 ieee80211_mod_tpt_led_trig(local
,
540 IEEE80211_TPT_LEDTRIG_FL_RADIO
, 0);
544 * Copy the hopefully now-present MAC address to
545 * this interface, if it has the special null one.
547 if (dev
&& is_zero_ether_addr(dev
->dev_addr
)) {
548 memcpy(dev
->dev_addr
,
549 local
->hw
.wiphy
->perm_addr
,
551 memcpy(dev
->perm_addr
, dev
->dev_addr
, ETH_ALEN
);
553 if (!is_valid_ether_addr(dev
->dev_addr
)) {
554 res
= -EADDRNOTAVAIL
;
559 switch (sdata
->vif
.type
) {
560 case NL80211_IFTYPE_AP_VLAN
:
561 /* no need to tell driver, but set carrier and chanctx */
562 if (rtnl_dereference(sdata
->bss
->beacon
)) {
563 ieee80211_vif_vlan_copy_chanctx(sdata
);
564 netif_carrier_on(dev
);
566 netif_carrier_off(dev
);
569 case NL80211_IFTYPE_MONITOR
:
570 if (sdata
->u
.mntr_flags
& MONITOR_FLAG_COOK_FRAMES
) {
571 local
->cooked_mntrs
++;
575 if (sdata
->u
.mntr_flags
& MONITOR_FLAG_ACTIVE
) {
576 res
= drv_add_interface(local
, sdata
);
579 } else if (local
->monitors
== 0 && local
->open_count
== 0) {
580 res
= ieee80211_add_virtual_monitor(local
);
585 /* must be before the call to ieee80211_configure_filter */
587 if (local
->monitors
== 1) {
588 local
->hw
.conf
.flags
|= IEEE80211_CONF_MONITOR
;
589 hw_reconf_flags
|= IEEE80211_CONF_CHANGE_MONITOR
;
592 ieee80211_adjust_monitor_flags(sdata
, 1);
593 ieee80211_configure_filter(local
);
594 mutex_lock(&local
->mtx
);
595 ieee80211_recalc_idle(local
);
596 mutex_unlock(&local
->mtx
);
598 netif_carrier_on(dev
);
602 ieee80211_del_virtual_monitor(local
);
604 res
= drv_add_interface(local
, sdata
);
607 res
= ieee80211_check_queues(sdata
,
608 ieee80211_vif_type_p2p(&sdata
->vif
));
610 goto err_del_interface
;
613 if (sdata
->vif
.type
== NL80211_IFTYPE_AP
) {
615 local
->fif_probe_req
++;
617 ieee80211_configure_filter(local
);
618 } else if (sdata
->vif
.type
== NL80211_IFTYPE_ADHOC
) {
619 local
->fif_probe_req
++;
622 if (sdata
->vif
.type
!= NL80211_IFTYPE_P2P_DEVICE
)
623 changed
|= ieee80211_reset_erp_info(sdata
);
624 ieee80211_bss_info_change_notify(sdata
, changed
);
626 switch (sdata
->vif
.type
) {
627 case NL80211_IFTYPE_STATION
:
628 case NL80211_IFTYPE_ADHOC
:
629 case NL80211_IFTYPE_AP
:
630 case NL80211_IFTYPE_MESH_POINT
:
631 netif_carrier_off(dev
);
633 case NL80211_IFTYPE_WDS
:
634 case NL80211_IFTYPE_P2P_DEVICE
:
642 * set default queue parameters so drivers don't
643 * need to initialise the hardware if the hardware
644 * doesn't start up with sane defaults
646 ieee80211_set_wmm_default(sdata
, true);
649 set_bit(SDATA_STATE_RUNNING
, &sdata
->state
);
651 if (sdata
->vif
.type
== NL80211_IFTYPE_WDS
) {
652 /* Create STA entry for the WDS peer */
653 sta
= sta_info_alloc(sdata
, sdata
->u
.wds
.remote_addr
,
657 goto err_del_interface
;
660 sta_info_pre_move_state(sta
, IEEE80211_STA_AUTH
);
661 sta_info_pre_move_state(sta
, IEEE80211_STA_ASSOC
);
662 sta_info_pre_move_state(sta
, IEEE80211_STA_AUTHORIZED
);
664 res
= sta_info_insert(sta
);
666 /* STA has been freed */
667 goto err_del_interface
;
670 rate_control_rate_init(sta
);
671 netif_carrier_on(dev
);
672 } else if (sdata
->vif
.type
== NL80211_IFTYPE_P2P_DEVICE
) {
673 rcu_assign_pointer(local
->p2p_sdata
, sdata
);
677 * set_multicast_list will be invoked by the networking core
678 * which will check whether any increments here were done in
679 * error and sync them down to the hardware as filter flags.
681 if (sdata
->flags
& IEEE80211_SDATA_ALLMULTI
)
682 atomic_inc(&local
->iff_allmultis
);
684 if (sdata
->flags
& IEEE80211_SDATA_PROMISC
)
685 atomic_inc(&local
->iff_promiscs
);
691 ieee80211_hw_config(local
, hw_reconf_flags
);
693 ieee80211_recalc_ps(local
, -1);
695 if (sdata
->vif
.type
== NL80211_IFTYPE_MONITOR
||
696 sdata
->vif
.type
== NL80211_IFTYPE_AP_VLAN
) {
697 /* XXX: for AP_VLAN, actually track AP queues */
698 netif_tx_start_all_queues(dev
);
701 int n_acs
= IEEE80211_NUM_ACS
;
704 if (local
->hw
.queues
< IEEE80211_NUM_ACS
)
707 spin_lock_irqsave(&local
->queue_stop_reason_lock
, flags
);
708 if (sdata
->vif
.cab_queue
== IEEE80211_INVAL_HW_QUEUE
||
709 (local
->queue_stop_reasons
[sdata
->vif
.cab_queue
] == 0 &&
710 skb_queue_empty(&local
->pending
[sdata
->vif
.cab_queue
]))) {
711 for (ac
= 0; ac
< n_acs
; ac
++) {
712 int ac_queue
= sdata
->vif
.hw_queue
[ac
];
714 if (local
->queue_stop_reasons
[ac_queue
] == 0 &&
715 skb_queue_empty(&local
->pending
[ac_queue
]))
716 netif_start_subqueue(dev
, ac
);
719 spin_unlock_irqrestore(&local
->queue_stop_reason_lock
, flags
);
724 drv_remove_interface(local
, sdata
);
726 if (!local
->open_count
)
730 if (sdata
->vif
.type
== NL80211_IFTYPE_AP_VLAN
)
731 list_del(&sdata
->u
.vlan
.list
);
732 /* might already be clear but that doesn't matter */
733 clear_bit(SDATA_STATE_RUNNING
, &sdata
->state
);
737 static int ieee80211_open(struct net_device
*dev
)
739 struct ieee80211_sub_if_data
*sdata
= IEEE80211_DEV_TO_SUB_IF(dev
);
742 /* fail early if user set an invalid address */
743 if (!is_valid_ether_addr(dev
->dev_addr
))
744 return -EADDRNOTAVAIL
;
746 err
= ieee80211_check_concurrent_iface(sdata
, sdata
->vif
.type
);
750 return ieee80211_do_open(&sdata
->wdev
, true);
753 static void ieee80211_do_stop(struct ieee80211_sub_if_data
*sdata
,
756 struct ieee80211_local
*local
= sdata
->local
;
758 struct sk_buff
*skb
, *tmp
;
759 u32 hw_reconf_flags
= 0;
762 struct cfg80211_chan_def chandef
;
764 clear_bit(SDATA_STATE_RUNNING
, &sdata
->state
);
766 if (rcu_access_pointer(local
->scan_sdata
) == sdata
)
767 ieee80211_scan_cancel(local
);
770 * Stop TX on this interface first.
773 netif_tx_stop_all_queues(sdata
->dev
);
775 ieee80211_roc_purge(local
, sdata
);
777 switch (sdata
->vif
.type
) {
778 case NL80211_IFTYPE_STATION
:
779 ieee80211_mgd_stop(sdata
);
781 case NL80211_IFTYPE_ADHOC
:
782 ieee80211_ibss_stop(sdata
);
784 case NL80211_IFTYPE_AP
:
785 cancel_work_sync(&sdata
->u
.ap
.request_smps_work
);
792 * Remove all stations associated with this interface.
794 * This must be done before calling ops->remove_interface()
795 * because otherwise we can later invoke ops->sta_notify()
796 * whenever the STAs are removed, and that invalidates driver
797 * assumptions about always getting a vif pointer that is valid
798 * (because if we remove a STA after ops->remove_interface()
799 * the driver will have removed the vif info already!)
801 * This is relevant only in WDS mode, in all other modes we've
802 * already removed all stations when disconnecting or similar,
805 flushed
= sta_info_flush(sdata
);
806 WARN_ON_ONCE((sdata
->vif
.type
!= NL80211_IFTYPE_WDS
&& flushed
> 0) ||
807 (sdata
->vif
.type
== NL80211_IFTYPE_WDS
&& flushed
!= 1));
809 /* don't count this interface for promisc/allmulti while it is down */
810 if (sdata
->flags
& IEEE80211_SDATA_ALLMULTI
)
811 atomic_dec(&local
->iff_allmultis
);
813 if (sdata
->flags
& IEEE80211_SDATA_PROMISC
)
814 atomic_dec(&local
->iff_promiscs
);
816 if (sdata
->vif
.type
== NL80211_IFTYPE_AP
) {
818 local
->fif_probe_req
--;
819 } else if (sdata
->vif
.type
== NL80211_IFTYPE_ADHOC
) {
820 local
->fif_probe_req
--;
824 netif_addr_lock_bh(sdata
->dev
);
825 spin_lock_bh(&local
->filter_lock
);
826 __hw_addr_unsync(&local
->mc_list
, &sdata
->dev
->mc
,
827 sdata
->dev
->addr_len
);
828 spin_unlock_bh(&local
->filter_lock
);
829 netif_addr_unlock_bh(sdata
->dev
);
832 del_timer_sync(&local
->dynamic_ps_timer
);
833 cancel_work_sync(&local
->dynamic_ps_enable_work
);
835 cancel_work_sync(&sdata
->recalc_smps
);
836 sdata
->vif
.csa_active
= false;
837 cancel_work_sync(&sdata
->csa_finalize_work
);
839 cancel_delayed_work_sync(&sdata
->dfs_cac_timer_work
);
841 if (sdata
->wdev
.cac_started
) {
842 chandef
= sdata
->vif
.bss_conf
.chandef
;
843 WARN_ON(local
->suspended
);
844 mutex_lock(&local
->mtx
);
845 ieee80211_vif_release_channel(sdata
);
846 mutex_unlock(&local
->mtx
);
847 cfg80211_cac_event(sdata
->dev
, &chandef
,
848 NL80211_RADAR_CAC_ABORTED
,
852 /* APs need special treatment */
853 if (sdata
->vif
.type
== NL80211_IFTYPE_AP
) {
854 struct ieee80211_sub_if_data
*vlan
, *tmpsdata
;
856 /* down all dependent devices, that is VLANs */
857 list_for_each_entry_safe(vlan
, tmpsdata
, &sdata
->u
.ap
.vlans
,
859 dev_close(vlan
->dev
);
860 WARN_ON(!list_empty(&sdata
->u
.ap
.vlans
));
861 } else if (sdata
->vif
.type
== NL80211_IFTYPE_AP_VLAN
) {
862 /* remove all packets in parent bc_buf pointing to this dev */
863 ps
= &sdata
->bss
->ps
;
865 spin_lock_irqsave(&ps
->bc_buf
.lock
, flags
);
866 skb_queue_walk_safe(&ps
->bc_buf
, skb
, tmp
) {
867 if (skb
->dev
== sdata
->dev
) {
868 __skb_unlink(skb
, &ps
->bc_buf
);
869 local
->total_ps_buffered
--;
870 ieee80211_free_txskb(&local
->hw
, skb
);
873 spin_unlock_irqrestore(&ps
->bc_buf
.lock
, flags
);
879 switch (sdata
->vif
.type
) {
880 case NL80211_IFTYPE_AP_VLAN
:
881 list_del(&sdata
->u
.vlan
.list
);
882 rcu_assign_pointer(sdata
->vif
.chanctx_conf
, NULL
);
883 /* no need to tell driver */
885 case NL80211_IFTYPE_MONITOR
:
886 if (sdata
->u
.mntr_flags
& MONITOR_FLAG_COOK_FRAMES
) {
887 local
->cooked_mntrs
--;
892 if (local
->monitors
== 0) {
893 local
->hw
.conf
.flags
&= ~IEEE80211_CONF_MONITOR
;
894 hw_reconf_flags
|= IEEE80211_CONF_CHANGE_MONITOR
;
897 ieee80211_adjust_monitor_flags(sdata
, -1);
899 case NL80211_IFTYPE_P2P_DEVICE
:
900 /* relies on synchronize_rcu() below */
901 rcu_assign_pointer(local
->p2p_sdata
, NULL
);
904 cancel_work_sync(&sdata
->work
);
906 * When we get here, the interface is marked down.
907 * Free the remaining keys, if there are any
908 * (shouldn't be, except maybe in WDS mode?)
910 * Force the key freeing to always synchronize_net()
911 * to wait for the RX path in case it is using this
912 * interface enqueuing frames * at this very time on
915 ieee80211_free_keys(sdata
, true);
918 case NL80211_IFTYPE_AP
:
919 skb_queue_purge(&sdata
->skb_queue
);
924 spin_lock_irqsave(&local
->queue_stop_reason_lock
, flags
);
925 for (i
= 0; i
< IEEE80211_MAX_QUEUES
; i
++) {
926 skb_queue_walk_safe(&local
->pending
[i
], skb
, tmp
) {
927 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
928 if (info
->control
.vif
== &sdata
->vif
) {
929 __skb_unlink(skb
, &local
->pending
[i
]);
930 ieee80211_free_txskb(&local
->hw
, skb
);
934 spin_unlock_irqrestore(&local
->queue_stop_reason_lock
, flags
);
936 if (local
->open_count
== 0)
937 ieee80211_clear_tx_pending(local
);
940 * If the interface goes down while suspended, presumably because
941 * the device was unplugged and that happens before our resume,
942 * then the driver is already unconfigured and the remainder of
943 * this function isn't needed.
944 * XXX: what about WoWLAN? If the device has software state, e.g.
945 * memory allocated, it might expect teardown commands from
948 if (local
->suspended
) {
949 WARN_ON(local
->wowlan
);
950 WARN_ON(rtnl_dereference(local
->monitor_sdata
));
954 switch (sdata
->vif
.type
) {
955 case NL80211_IFTYPE_AP_VLAN
:
957 case NL80211_IFTYPE_MONITOR
:
958 if (local
->monitors
== 0)
959 ieee80211_del_virtual_monitor(local
);
961 mutex_lock(&local
->mtx
);
962 ieee80211_recalc_idle(local
);
963 mutex_unlock(&local
->mtx
);
965 if (!(sdata
->u
.mntr_flags
& MONITOR_FLAG_ACTIVE
))
971 drv_remove_interface(local
, sdata
);
974 ieee80211_recalc_ps(local
, -1);
976 if (local
->open_count
== 0) {
977 ieee80211_stop_device(local
);
979 /* no reconfiguring after stop! */
983 /* do after stop to avoid reconfiguring when we stop anyway */
984 ieee80211_configure_filter(local
);
985 ieee80211_hw_config(local
, hw_reconf_flags
);
987 if (local
->monitors
== local
->open_count
)
988 ieee80211_add_virtual_monitor(local
);
991 static int ieee80211_stop(struct net_device
*dev
)
993 struct ieee80211_sub_if_data
*sdata
= IEEE80211_DEV_TO_SUB_IF(dev
);
995 ieee80211_do_stop(sdata
, true);
1000 static void ieee80211_set_multicast_list(struct net_device
*dev
)
1002 struct ieee80211_sub_if_data
*sdata
= IEEE80211_DEV_TO_SUB_IF(dev
);
1003 struct ieee80211_local
*local
= sdata
->local
;
1004 int allmulti
, promisc
, sdata_allmulti
, sdata_promisc
;
1006 allmulti
= !!(dev
->flags
& IFF_ALLMULTI
);
1007 promisc
= !!(dev
->flags
& IFF_PROMISC
);
1008 sdata_allmulti
= !!(sdata
->flags
& IEEE80211_SDATA_ALLMULTI
);
1009 sdata_promisc
= !!(sdata
->flags
& IEEE80211_SDATA_PROMISC
);
1011 if (allmulti
!= sdata_allmulti
) {
1012 if (dev
->flags
& IFF_ALLMULTI
)
1013 atomic_inc(&local
->iff_allmultis
);
1015 atomic_dec(&local
->iff_allmultis
);
1016 sdata
->flags
^= IEEE80211_SDATA_ALLMULTI
;
1019 if (promisc
!= sdata_promisc
) {
1020 if (dev
->flags
& IFF_PROMISC
)
1021 atomic_inc(&local
->iff_promiscs
);
1023 atomic_dec(&local
->iff_promiscs
);
1024 sdata
->flags
^= IEEE80211_SDATA_PROMISC
;
1026 spin_lock_bh(&local
->filter_lock
);
1027 __hw_addr_sync(&local
->mc_list
, &dev
->mc
, dev
->addr_len
);
1028 spin_unlock_bh(&local
->filter_lock
);
1029 ieee80211_queue_work(&local
->hw
, &local
->reconfig_filter
);
1033 * Called when the netdev is removed or, by the code below, before
1034 * the interface type changes.
1036 static void ieee80211_teardown_sdata(struct ieee80211_sub_if_data
*sdata
)
1040 /* free extra data */
1041 ieee80211_free_keys(sdata
, false);
1043 ieee80211_debugfs_remove_netdev(sdata
);
1045 for (i
= 0; i
< IEEE80211_FRAGMENT_MAX
; i
++)
1046 __skb_queue_purge(&sdata
->fragments
[i
].skb_list
);
1047 sdata
->fragment_next
= 0;
1049 if (ieee80211_vif_is_mesh(&sdata
->vif
))
1050 mesh_rmc_free(sdata
);
1053 static void ieee80211_uninit(struct net_device
*dev
)
1055 ieee80211_teardown_sdata(IEEE80211_DEV_TO_SUB_IF(dev
));
1058 static u16
ieee80211_netdev_select_queue(struct net_device
*dev
,
1059 struct sk_buff
*skb
,
1061 select_queue_fallback_t fallback
)
1063 return ieee80211_select_queue(IEEE80211_DEV_TO_SUB_IF(dev
), skb
);
1066 static const struct net_device_ops ieee80211_dataif_ops
= {
1067 .ndo_open
= ieee80211_open
,
1068 .ndo_stop
= ieee80211_stop
,
1069 .ndo_uninit
= ieee80211_uninit
,
1070 .ndo_start_xmit
= ieee80211_subif_start_xmit
,
1071 .ndo_set_rx_mode
= ieee80211_set_multicast_list
,
1072 .ndo_change_mtu
= ieee80211_change_mtu
,
1073 .ndo_set_mac_address
= ieee80211_change_mac
,
1074 .ndo_select_queue
= ieee80211_netdev_select_queue
,
1077 static u16
ieee80211_monitor_select_queue(struct net_device
*dev
,
1078 struct sk_buff
*skb
,
1080 select_queue_fallback_t fallback
)
1082 struct ieee80211_sub_if_data
*sdata
= IEEE80211_DEV_TO_SUB_IF(dev
);
1083 struct ieee80211_local
*local
= sdata
->local
;
1084 struct ieee80211_hdr
*hdr
;
1085 struct ieee80211_radiotap_header
*rtap
= (void *)skb
->data
;
1087 if (local
->hw
.queues
< IEEE80211_NUM_ACS
)
1091 skb
->len
< le16_to_cpu(rtap
->it_len
) + 2 /* frame control */)
1092 return 0; /* doesn't matter, frame will be dropped */
1094 hdr
= (void *)((u8
*)skb
->data
+ le16_to_cpu(rtap
->it_len
));
1096 return ieee80211_select_queue_80211(sdata
, skb
, hdr
);
1099 static const struct net_device_ops ieee80211_monitorif_ops
= {
1100 .ndo_open
= ieee80211_open
,
1101 .ndo_stop
= ieee80211_stop
,
1102 .ndo_uninit
= ieee80211_uninit
,
1103 .ndo_start_xmit
= ieee80211_monitor_start_xmit
,
1104 .ndo_set_rx_mode
= ieee80211_set_multicast_list
,
1105 .ndo_change_mtu
= ieee80211_change_mtu
,
1106 .ndo_set_mac_address
= ieee80211_change_mac
,
1107 .ndo_select_queue
= ieee80211_monitor_select_queue
,
1110 static void ieee80211_if_setup(struct net_device
*dev
)
1113 dev
->priv_flags
&= ~IFF_TX_SKB_SHARING
;
1114 dev
->netdev_ops
= &ieee80211_dataif_ops
;
1115 dev
->destructor
= free_netdev
;
1118 static void ieee80211_iface_work(struct work_struct
*work
)
1120 struct ieee80211_sub_if_data
*sdata
=
1121 container_of(work
, struct ieee80211_sub_if_data
, work
);
1122 struct ieee80211_local
*local
= sdata
->local
;
1123 struct sk_buff
*skb
;
1124 struct sta_info
*sta
;
1125 struct ieee80211_ra_tid
*ra_tid
;
1127 if (!ieee80211_sdata_running(sdata
))
1130 if (local
->scanning
)
1134 * ieee80211_queue_work() should have picked up most cases,
1135 * here we'll pick the rest.
1137 if (WARN(local
->suspended
,
1138 "interface work scheduled while going to suspend\n"))
1141 /* first process frames */
1142 while ((skb
= skb_dequeue(&sdata
->skb_queue
))) {
1143 struct ieee80211_mgmt
*mgmt
= (void *)skb
->data
;
1145 if (skb
->pkt_type
== IEEE80211_SDATA_QUEUE_AGG_START
) {
1146 ra_tid
= (void *)&skb
->cb
;
1147 ieee80211_start_tx_ba_cb(&sdata
->vif
, ra_tid
->ra
,
1149 } else if (skb
->pkt_type
== IEEE80211_SDATA_QUEUE_AGG_STOP
) {
1150 ra_tid
= (void *)&skb
->cb
;
1151 ieee80211_stop_tx_ba_cb(&sdata
->vif
, ra_tid
->ra
,
1153 } else if (ieee80211_is_action(mgmt
->frame_control
) &&
1154 mgmt
->u
.action
.category
== WLAN_CATEGORY_BACK
) {
1157 mutex_lock(&local
->sta_mtx
);
1158 sta
= sta_info_get_bss(sdata
, mgmt
->sa
);
1160 switch (mgmt
->u
.action
.u
.addba_req
.action_code
) {
1161 case WLAN_ACTION_ADDBA_REQ
:
1162 ieee80211_process_addba_request(
1163 local
, sta
, mgmt
, len
);
1165 case WLAN_ACTION_ADDBA_RESP
:
1166 ieee80211_process_addba_resp(local
, sta
,
1169 case WLAN_ACTION_DELBA
:
1170 ieee80211_process_delba(sdata
, sta
,
1178 mutex_unlock(&local
->sta_mtx
);
1179 } else if (ieee80211_is_data_qos(mgmt
->frame_control
)) {
1180 struct ieee80211_hdr
*hdr
= (void *)mgmt
;
1182 * So the frame isn't mgmt, but frame_control
1183 * is at the right place anyway, of course, so
1184 * the if statement is correct.
1186 * Warn if we have other data frame types here,
1187 * they must not get here.
1189 WARN_ON(hdr
->frame_control
&
1190 cpu_to_le16(IEEE80211_STYPE_NULLFUNC
));
1191 WARN_ON(!(hdr
->seq_ctrl
&
1192 cpu_to_le16(IEEE80211_SCTL_FRAG
)));
1194 * This was a fragment of a frame, received while
1195 * a block-ack session was active. That cannot be
1196 * right, so terminate the session.
1198 mutex_lock(&local
->sta_mtx
);
1199 sta
= sta_info_get_bss(sdata
, mgmt
->sa
);
1201 u16 tid
= *ieee80211_get_qos_ctl(hdr
) &
1202 IEEE80211_QOS_CTL_TID_MASK
;
1204 __ieee80211_stop_rx_ba_session(
1205 sta
, tid
, WLAN_BACK_RECIPIENT
,
1206 WLAN_REASON_QSTA_REQUIRE_SETUP
,
1209 mutex_unlock(&local
->sta_mtx
);
1210 } else switch (sdata
->vif
.type
) {
1211 case NL80211_IFTYPE_STATION
:
1212 ieee80211_sta_rx_queued_mgmt(sdata
, skb
);
1214 case NL80211_IFTYPE_ADHOC
:
1215 ieee80211_ibss_rx_queued_mgmt(sdata
, skb
);
1217 case NL80211_IFTYPE_MESH_POINT
:
1218 if (!ieee80211_vif_is_mesh(&sdata
->vif
))
1220 ieee80211_mesh_rx_queued_mgmt(sdata
, skb
);
1223 WARN(1, "frame for unexpected interface type");
1230 /* then other type-dependent work */
1231 switch (sdata
->vif
.type
) {
1232 case NL80211_IFTYPE_STATION
:
1233 ieee80211_sta_work(sdata
);
1235 case NL80211_IFTYPE_ADHOC
:
1236 ieee80211_ibss_work(sdata
);
1238 case NL80211_IFTYPE_MESH_POINT
:
1239 if (!ieee80211_vif_is_mesh(&sdata
->vif
))
1241 ieee80211_mesh_work(sdata
);
1248 static void ieee80211_recalc_smps_work(struct work_struct
*work
)
1250 struct ieee80211_sub_if_data
*sdata
=
1251 container_of(work
, struct ieee80211_sub_if_data
, recalc_smps
);
1253 ieee80211_recalc_smps(sdata
);
1257 * Helper function to initialise an interface to a specific type.
1259 static void ieee80211_setup_sdata(struct ieee80211_sub_if_data
*sdata
,
1260 enum nl80211_iftype type
)
1262 /* clear type-dependent union */
1263 memset(&sdata
->u
, 0, sizeof(sdata
->u
));
1265 /* and set some type-dependent values */
1266 sdata
->vif
.type
= type
;
1267 sdata
->vif
.p2p
= false;
1268 sdata
->wdev
.iftype
= type
;
1270 sdata
->control_port_protocol
= cpu_to_be16(ETH_P_PAE
);
1271 sdata
->control_port_no_encrypt
= false;
1272 sdata
->encrypt_headroom
= IEEE80211_ENCRYPT_HEADROOM
;
1274 sdata
->noack_map
= 0;
1276 /* only monitor/p2p-device differ */
1278 sdata
->dev
->netdev_ops
= &ieee80211_dataif_ops
;
1279 sdata
->dev
->type
= ARPHRD_ETHER
;
1282 skb_queue_head_init(&sdata
->skb_queue
);
1283 INIT_WORK(&sdata
->work
, ieee80211_iface_work
);
1284 INIT_WORK(&sdata
->recalc_smps
, ieee80211_recalc_smps_work
);
1285 INIT_WORK(&sdata
->csa_finalize_work
, ieee80211_csa_finalize_work
);
1288 case NL80211_IFTYPE_P2P_GO
:
1289 type
= NL80211_IFTYPE_AP
;
1290 sdata
->vif
.type
= type
;
1291 sdata
->vif
.p2p
= true;
1293 case NL80211_IFTYPE_AP
:
1294 skb_queue_head_init(&sdata
->u
.ap
.ps
.bc_buf
);
1295 INIT_LIST_HEAD(&sdata
->u
.ap
.vlans
);
1296 INIT_WORK(&sdata
->u
.ap
.request_smps_work
,
1297 ieee80211_request_smps_ap_work
);
1298 sdata
->vif
.bss_conf
.bssid
= sdata
->vif
.addr
;
1299 sdata
->u
.ap
.req_smps
= IEEE80211_SMPS_OFF
;
1301 case NL80211_IFTYPE_P2P_CLIENT
:
1302 type
= NL80211_IFTYPE_STATION
;
1303 sdata
->vif
.type
= type
;
1304 sdata
->vif
.p2p
= true;
1306 case NL80211_IFTYPE_STATION
:
1307 sdata
->vif
.bss_conf
.bssid
= sdata
->u
.mgd
.bssid
;
1308 ieee80211_sta_setup_sdata(sdata
);
1310 case NL80211_IFTYPE_ADHOC
:
1311 sdata
->vif
.bss_conf
.bssid
= sdata
->u
.ibss
.bssid
;
1312 ieee80211_ibss_setup_sdata(sdata
);
1314 case NL80211_IFTYPE_MESH_POINT
:
1315 if (ieee80211_vif_is_mesh(&sdata
->vif
))
1316 ieee80211_mesh_init_sdata(sdata
);
1318 case NL80211_IFTYPE_MONITOR
:
1319 sdata
->dev
->type
= ARPHRD_IEEE80211_RADIOTAP
;
1320 sdata
->dev
->netdev_ops
= &ieee80211_monitorif_ops
;
1321 sdata
->u
.mntr_flags
= MONITOR_FLAG_CONTROL
|
1322 MONITOR_FLAG_OTHER_BSS
;
1324 case NL80211_IFTYPE_WDS
:
1325 sdata
->vif
.bss_conf
.bssid
= NULL
;
1327 case NL80211_IFTYPE_AP_VLAN
:
1328 case NL80211_IFTYPE_P2P_DEVICE
:
1329 sdata
->vif
.bss_conf
.bssid
= sdata
->vif
.addr
;
1331 case NL80211_IFTYPE_UNSPECIFIED
:
1332 case NUM_NL80211_IFTYPES
:
1337 ieee80211_debugfs_add_netdev(sdata
);
1340 static int ieee80211_runtime_change_iftype(struct ieee80211_sub_if_data
*sdata
,
1341 enum nl80211_iftype type
)
1343 struct ieee80211_local
*local
= sdata
->local
;
1345 enum nl80211_iftype internal_type
= type
;
1350 if (!local
->ops
->change_interface
)
1353 switch (sdata
->vif
.type
) {
1354 case NL80211_IFTYPE_AP
:
1355 case NL80211_IFTYPE_STATION
:
1356 case NL80211_IFTYPE_ADHOC
:
1358 * Could maybe also all others here?
1359 * Just not sure how that interacts
1360 * with the RX/config path e.g. for
1369 case NL80211_IFTYPE_AP
:
1370 case NL80211_IFTYPE_STATION
:
1371 case NL80211_IFTYPE_ADHOC
:
1373 * Could probably support everything
1374 * but WDS here (WDS do_open can fail
1375 * under memory pressure, which this
1376 * code isn't prepared to handle).
1379 case NL80211_IFTYPE_P2P_CLIENT
:
1381 internal_type
= NL80211_IFTYPE_STATION
;
1383 case NL80211_IFTYPE_P2P_GO
:
1385 internal_type
= NL80211_IFTYPE_AP
;
1391 ret
= ieee80211_check_concurrent_iface(sdata
, internal_type
);
1395 ieee80211_do_stop(sdata
, false);
1397 ieee80211_teardown_sdata(sdata
);
1399 ret
= drv_change_interface(local
, sdata
, internal_type
, p2p
);
1401 type
= ieee80211_vif_type_p2p(&sdata
->vif
);
1404 * Ignore return value here, there's not much we can do since
1405 * the driver changed the interface type internally already.
1406 * The warnings will hopefully make driver authors fix it :-)
1408 ieee80211_check_queues(sdata
, type
);
1410 ieee80211_setup_sdata(sdata
, type
);
1412 err
= ieee80211_do_open(&sdata
->wdev
, false);
1413 WARN(err
, "type change: do_open returned %d", err
);
1418 int ieee80211_if_change_type(struct ieee80211_sub_if_data
*sdata
,
1419 enum nl80211_iftype type
)
1425 if (type
== ieee80211_vif_type_p2p(&sdata
->vif
))
1428 if (ieee80211_sdata_running(sdata
)) {
1429 ret
= ieee80211_runtime_change_iftype(sdata
, type
);
1433 /* Purge and reset type-dependent state. */
1434 ieee80211_teardown_sdata(sdata
);
1435 ieee80211_setup_sdata(sdata
, type
);
1438 /* reset some values that shouldn't be kept across type changes */
1439 sdata
->drop_unencrypted
= 0;
1440 if (type
== NL80211_IFTYPE_STATION
)
1441 sdata
->u
.mgd
.use_4addr
= false;
1446 static void ieee80211_assign_perm_addr(struct ieee80211_local
*local
,
1447 u8
*perm_addr
, enum nl80211_iftype type
)
1449 struct ieee80211_sub_if_data
*sdata
;
1450 u64 mask
, start
, addr
, val
, inc
;
1452 u8 tmp_addr
[ETH_ALEN
];
1455 /* default ... something at least */
1456 memcpy(perm_addr
, local
->hw
.wiphy
->perm_addr
, ETH_ALEN
);
1458 if (is_zero_ether_addr(local
->hw
.wiphy
->addr_mask
) &&
1459 local
->hw
.wiphy
->n_addresses
<= 1)
1462 mutex_lock(&local
->iflist_mtx
);
1465 case NL80211_IFTYPE_MONITOR
:
1466 /* doesn't matter */
1468 case NL80211_IFTYPE_WDS
:
1469 case NL80211_IFTYPE_AP_VLAN
:
1470 /* match up with an AP interface */
1471 list_for_each_entry(sdata
, &local
->interfaces
, list
) {
1472 if (sdata
->vif
.type
!= NL80211_IFTYPE_AP
)
1474 memcpy(perm_addr
, sdata
->vif
.addr
, ETH_ALEN
);
1477 /* keep default if no AP interface present */
1479 case NL80211_IFTYPE_P2P_CLIENT
:
1480 case NL80211_IFTYPE_P2P_GO
:
1481 if (local
->hw
.flags
& IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF
) {
1482 list_for_each_entry(sdata
, &local
->interfaces
, list
) {
1483 if (sdata
->vif
.type
!= NL80211_IFTYPE_P2P_DEVICE
)
1485 if (!ieee80211_sdata_running(sdata
))
1487 memcpy(perm_addr
, sdata
->vif
.addr
, ETH_ALEN
);
1491 /* otherwise fall through */
1493 /* assign a new address if possible -- try n_addresses first */
1494 for (i
= 0; i
< local
->hw
.wiphy
->n_addresses
; i
++) {
1497 list_for_each_entry(sdata
, &local
->interfaces
, list
) {
1498 if (ether_addr_equal(local
->hw
.wiphy
->addresses
[i
].addr
,
1507 local
->hw
.wiphy
->addresses
[i
].addr
,
1513 /* try mask if available */
1514 if (is_zero_ether_addr(local
->hw
.wiphy
->addr_mask
))
1517 m
= local
->hw
.wiphy
->addr_mask
;
1518 mask
= ((u64
)m
[0] << 5*8) | ((u64
)m
[1] << 4*8) |
1519 ((u64
)m
[2] << 3*8) | ((u64
)m
[3] << 2*8) |
1520 ((u64
)m
[4] << 1*8) | ((u64
)m
[5] << 0*8);
1522 if (__ffs64(mask
) + hweight64(mask
) != fls64(mask
)) {
1523 /* not a contiguous mask ... not handled now! */
1524 pr_info("not contiguous\n");
1529 * Pick address of existing interface in case user changed
1530 * MAC address manually, default to perm_addr.
1532 m
= local
->hw
.wiphy
->perm_addr
;
1533 list_for_each_entry(sdata
, &local
->interfaces
, list
) {
1534 if (sdata
->vif
.type
== NL80211_IFTYPE_MONITOR
)
1536 m
= sdata
->vif
.addr
;
1539 start
= ((u64
)m
[0] << 5*8) | ((u64
)m
[1] << 4*8) |
1540 ((u64
)m
[2] << 3*8) | ((u64
)m
[3] << 2*8) |
1541 ((u64
)m
[4] << 1*8) | ((u64
)m
[5] << 0*8);
1543 inc
= 1ULL<<__ffs64(mask
);
1544 val
= (start
& mask
);
1545 addr
= (start
& ~mask
) | (val
& mask
);
1549 tmp_addr
[5] = addr
>> 0*8;
1550 tmp_addr
[4] = addr
>> 1*8;
1551 tmp_addr
[3] = addr
>> 2*8;
1552 tmp_addr
[2] = addr
>> 3*8;
1553 tmp_addr
[1] = addr
>> 4*8;
1554 tmp_addr
[0] = addr
>> 5*8;
1558 list_for_each_entry(sdata
, &local
->interfaces
, list
) {
1559 if (ether_addr_equal(tmp_addr
, sdata
->vif
.addr
)) {
1566 memcpy(perm_addr
, tmp_addr
, ETH_ALEN
);
1569 addr
= (start
& ~mask
) | (val
& mask
);
1570 } while (addr
!= start
);
1576 mutex_unlock(&local
->iflist_mtx
);
1579 int ieee80211_if_add(struct ieee80211_local
*local
, const char *name
,
1580 struct wireless_dev
**new_wdev
, enum nl80211_iftype type
,
1581 struct vif_params
*params
)
1583 struct net_device
*ndev
= NULL
;
1584 struct ieee80211_sub_if_data
*sdata
= NULL
;
1590 if (type
== NL80211_IFTYPE_P2P_DEVICE
) {
1591 struct wireless_dev
*wdev
;
1593 sdata
= kzalloc(sizeof(*sdata
) + local
->hw
.vif_data_size
,
1597 wdev
= &sdata
->wdev
;
1600 strlcpy(sdata
->name
, name
, IFNAMSIZ
);
1601 ieee80211_assign_perm_addr(local
, wdev
->address
, type
);
1602 memcpy(sdata
->vif
.addr
, wdev
->address
, ETH_ALEN
);
1604 if (local
->hw
.queues
>= IEEE80211_NUM_ACS
)
1605 txqs
= IEEE80211_NUM_ACS
;
1607 ndev
= alloc_netdev_mqs(sizeof(*sdata
) +
1608 local
->hw
.vif_data_size
,
1609 name
, ieee80211_if_setup
, txqs
, 1);
1612 dev_net_set(ndev
, wiphy_net(local
->hw
.wiphy
));
1614 ndev
->needed_headroom
= local
->tx_headroom
+
1615 4*6 /* four MAC addresses */
1616 + 2 + 2 + 2 + 2 /* ctl, dur, seq, qos */
1618 + 8 /* rfc1042/bridge tunnel */
1619 - ETH_HLEN
/* ethernet hard_header_len */
1620 + IEEE80211_ENCRYPT_HEADROOM
;
1621 ndev
->needed_tailroom
= IEEE80211_ENCRYPT_TAILROOM
;
1623 ret
= dev_alloc_name(ndev
, ndev
->name
);
1629 ieee80211_assign_perm_addr(local
, ndev
->perm_addr
, type
);
1630 memcpy(ndev
->dev_addr
, ndev
->perm_addr
, ETH_ALEN
);
1631 SET_NETDEV_DEV(ndev
, wiphy_dev(local
->hw
.wiphy
));
1633 /* don't use IEEE80211_DEV_TO_SUB_IF -- it checks too much */
1634 sdata
= netdev_priv(ndev
);
1635 ndev
->ieee80211_ptr
= &sdata
->wdev
;
1636 memcpy(sdata
->vif
.addr
, ndev
->dev_addr
, ETH_ALEN
);
1637 memcpy(sdata
->name
, ndev
->name
, IFNAMSIZ
);
1642 /* initialise type-independent data */
1643 sdata
->wdev
.wiphy
= local
->hw
.wiphy
;
1644 sdata
->local
= local
;
1646 for (i
= 0; i
< IEEE80211_FRAGMENT_MAX
; i
++)
1647 skb_queue_head_init(&sdata
->fragments
[i
].skb_list
);
1649 INIT_LIST_HEAD(&sdata
->key_list
);
1651 INIT_DELAYED_WORK(&sdata
->dfs_cac_timer_work
,
1652 ieee80211_dfs_cac_timer_work
);
1653 INIT_DELAYED_WORK(&sdata
->dec_tailroom_needed_wk
,
1654 ieee80211_delayed_tailroom_dec
);
1656 for (i
= 0; i
< IEEE80211_NUM_BANDS
; i
++) {
1657 struct ieee80211_supported_band
*sband
;
1658 sband
= local
->hw
.wiphy
->bands
[i
];
1659 sdata
->rc_rateidx_mask
[i
] =
1660 sband
? (1 << sband
->n_bitrates
) - 1 : 0;
1662 memcpy(sdata
->rc_rateidx_mcs_mask
[i
],
1663 sband
->ht_cap
.mcs
.rx_mask
,
1664 sizeof(sdata
->rc_rateidx_mcs_mask
[i
]));
1666 memset(sdata
->rc_rateidx_mcs_mask
[i
], 0,
1667 sizeof(sdata
->rc_rateidx_mcs_mask
[i
]));
1670 ieee80211_set_default_queues(sdata
);
1672 sdata
->ap_power_level
= IEEE80211_UNSET_POWER_LEVEL
;
1673 sdata
->user_power_level
= local
->user_power_level
;
1675 sdata
->encrypt_headroom
= IEEE80211_ENCRYPT_HEADROOM
;
1677 /* setup type-dependent data */
1678 ieee80211_setup_sdata(sdata
, type
);
1682 ndev
->ieee80211_ptr
->use_4addr
= params
->use_4addr
;
1683 if (type
== NL80211_IFTYPE_STATION
)
1684 sdata
->u
.mgd
.use_4addr
= params
->use_4addr
;
1687 ndev
->features
|= local
->hw
.netdev_features
;
1689 ret
= register_netdevice(ndev
);
1696 mutex_lock(&local
->iflist_mtx
);
1697 list_add_tail_rcu(&sdata
->list
, &local
->interfaces
);
1698 mutex_unlock(&local
->iflist_mtx
);
1701 *new_wdev
= &sdata
->wdev
;
1706 void ieee80211_if_remove(struct ieee80211_sub_if_data
*sdata
)
1710 mutex_lock(&sdata
->local
->iflist_mtx
);
1711 list_del_rcu(&sdata
->list
);
1712 mutex_unlock(&sdata
->local
->iflist_mtx
);
1717 unregister_netdevice(sdata
->dev
);
1719 cfg80211_unregister_wdev(&sdata
->wdev
);
1724 void ieee80211_sdata_stop(struct ieee80211_sub_if_data
*sdata
)
1726 if (WARN_ON_ONCE(!test_bit(SDATA_STATE_RUNNING
, &sdata
->state
)))
1728 ieee80211_do_stop(sdata
, true);
1729 ieee80211_teardown_sdata(sdata
);
1733 * Remove all interfaces, may only be called at hardware unregistration
1734 * time because it doesn't do RCU-safe list removals.
1736 void ieee80211_remove_interfaces(struct ieee80211_local
*local
)
1738 struct ieee80211_sub_if_data
*sdata
, *tmp
;
1739 LIST_HEAD(unreg_list
);
1740 LIST_HEAD(wdev_list
);
1745 * Close all AP_VLAN interfaces first, as otherwise they
1746 * might be closed while the AP interface they belong to
1747 * is closed, causing unregister_netdevice_many() to crash.
1749 list_for_each_entry(sdata
, &local
->interfaces
, list
)
1750 if (sdata
->vif
.type
== NL80211_IFTYPE_AP_VLAN
)
1751 dev_close(sdata
->dev
);
1753 mutex_lock(&local
->iflist_mtx
);
1754 list_for_each_entry_safe(sdata
, tmp
, &local
->interfaces
, list
) {
1755 list_del(&sdata
->list
);
1758 unregister_netdevice_queue(sdata
->dev
, &unreg_list
);
1760 list_add(&sdata
->list
, &wdev_list
);
1762 mutex_unlock(&local
->iflist_mtx
);
1763 unregister_netdevice_many(&unreg_list
);
1764 list_del(&unreg_list
);
1766 list_for_each_entry_safe(sdata
, tmp
, &wdev_list
, list
) {
1767 list_del(&sdata
->list
);
1768 cfg80211_unregister_wdev(&sdata
->wdev
);
1773 static int netdev_notify(struct notifier_block
*nb
,
1774 unsigned long state
, void *ptr
)
1776 struct net_device
*dev
= netdev_notifier_info_to_dev(ptr
);
1777 struct ieee80211_sub_if_data
*sdata
;
1779 if (state
!= NETDEV_CHANGENAME
)
1782 if (!dev
->ieee80211_ptr
|| !dev
->ieee80211_ptr
->wiphy
)
1785 if (dev
->ieee80211_ptr
->wiphy
->privid
!= mac80211_wiphy_privid
)
1788 sdata
= IEEE80211_DEV_TO_SUB_IF(dev
);
1790 memcpy(sdata
->name
, dev
->name
, IFNAMSIZ
);
1792 ieee80211_debugfs_rename_netdev(sdata
);
1796 static struct notifier_block mac80211_netdev_notifier
= {
1797 .notifier_call
= netdev_notify
,
1800 int ieee80211_iface_init(void)
1802 return register_netdevice_notifier(&mac80211_netdev_notifier
);
1805 void ieee80211_iface_exit(void)
1807 unregister_netdevice_notifier(&mac80211_netdev_notifier
);