2 * BSS client mode implementation
3 * Copyright 2003-2008, Jouni Malinen <j@w1.fi>
4 * Copyright 2004, Instant802 Networks, Inc.
5 * Copyright 2005, Devicescape Software, Inc.
6 * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
7 * Copyright 2007, Michael Wu <flamingice@sourmilk.net>
8 * Copyright 2013-2014 Intel Mobile Communications GmbH
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
15 #include <linux/delay.h>
16 #include <linux/if_ether.h>
17 #include <linux/skbuff.h>
18 #include <linux/if_arp.h>
19 #include <linux/etherdevice.h>
20 #include <linux/moduleparam.h>
21 #include <linux/rtnetlink.h>
22 #include <linux/pm_qos.h>
23 #include <linux/crc32.h>
24 #include <linux/slab.h>
25 #include <linux/export.h>
26 #include <net/mac80211.h>
27 #include <asm/unaligned.h>
29 #include "ieee80211_i.h"
30 #include "driver-ops.h"
34 #define IEEE80211_AUTH_TIMEOUT (HZ / 5)
35 #define IEEE80211_AUTH_TIMEOUT_LONG (HZ / 2)
36 #define IEEE80211_AUTH_TIMEOUT_SHORT (HZ / 10)
37 #define IEEE80211_AUTH_MAX_TRIES 3
38 #define IEEE80211_AUTH_WAIT_ASSOC (HZ * 5)
39 #define IEEE80211_ASSOC_TIMEOUT (HZ / 5)
40 #define IEEE80211_ASSOC_TIMEOUT_LONG (HZ / 2)
41 #define IEEE80211_ASSOC_TIMEOUT_SHORT (HZ / 10)
42 #define IEEE80211_ASSOC_MAX_TRIES 3
44 static int max_nullfunc_tries
= 2;
45 module_param(max_nullfunc_tries
, int, 0644);
46 MODULE_PARM_DESC(max_nullfunc_tries
,
47 "Maximum nullfunc tx tries before disconnecting (reason 4).");
49 static int max_probe_tries
= 5;
50 module_param(max_probe_tries
, int, 0644);
51 MODULE_PARM_DESC(max_probe_tries
,
52 "Maximum probe tries before disconnecting (reason 4).");
55 * Beacon loss timeout is calculated as N frames times the
56 * advertised beacon interval. This may need to be somewhat
57 * higher than what hardware might detect to account for
58 * delays in the host processing frames. But since we also
59 * probe on beacon miss before declaring the connection lost
60 * default to what we want.
62 static int beacon_loss_count
= 7;
63 module_param(beacon_loss_count
, int, 0644);
64 MODULE_PARM_DESC(beacon_loss_count
,
65 "Number of beacon intervals before we decide beacon was lost.");
68 * Time the connection can be idle before we probe
69 * it to see if we can still talk to the AP.
71 #define IEEE80211_CONNECTION_IDLE_TIME (30 * HZ)
73 * Time we wait for a probe response after sending
74 * a probe request because of beacon loss or for
75 * checking the connection still works.
77 static int probe_wait_ms
= 500;
78 module_param(probe_wait_ms
, int, 0644);
79 MODULE_PARM_DESC(probe_wait_ms
,
80 "Maximum time(ms) to wait for probe response"
81 " before disconnecting (reason 4).");
84 * Weight given to the latest Beacon frame when calculating average signal
85 * strength for Beacon frames received in the current BSS. This must be
88 #define IEEE80211_SIGNAL_AVE_WEIGHT 3
91 * How many Beacon frames need to have been used in average signal strength
92 * before starting to indicate signal change events.
94 #define IEEE80211_SIGNAL_AVE_MIN_COUNT 4
97 * We can have multiple work items (and connection probing)
98 * scheduling this timer, but we need to take care to only
99 * reschedule it when it should fire _earlier_ than it was
100 * asked for before, or if it's not pending right now. This
101 * function ensures that. Note that it then is required to
102 * run this function for all timeouts after the first one
103 * has happened -- the work that runs from this timer will
106 static void run_again(struct ieee80211_sub_if_data
*sdata
,
107 unsigned long timeout
)
109 sdata_assert_lock(sdata
);
111 if (!timer_pending(&sdata
->u
.mgd
.timer
) ||
112 time_before(timeout
, sdata
->u
.mgd
.timer
.expires
))
113 mod_timer(&sdata
->u
.mgd
.timer
, timeout
);
116 void ieee80211_sta_reset_beacon_monitor(struct ieee80211_sub_if_data
*sdata
)
118 if (sdata
->vif
.driver_flags
& IEEE80211_VIF_BEACON_FILTER
)
121 if (sdata
->local
->hw
.flags
& IEEE80211_HW_CONNECTION_MONITOR
)
124 mod_timer(&sdata
->u
.mgd
.bcn_mon_timer
,
125 round_jiffies_up(jiffies
+ sdata
->u
.mgd
.beacon_timeout
));
128 void ieee80211_sta_reset_conn_monitor(struct ieee80211_sub_if_data
*sdata
)
130 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
132 if (unlikely(!sdata
->u
.mgd
.associated
))
135 ifmgd
->probe_send_count
= 0;
137 if (sdata
->local
->hw
.flags
& IEEE80211_HW_CONNECTION_MONITOR
)
140 mod_timer(&sdata
->u
.mgd
.conn_mon_timer
,
141 round_jiffies_up(jiffies
+ IEEE80211_CONNECTION_IDLE_TIME
));
144 static int ecw2cw(int ecw
)
146 return (1 << ecw
) - 1;
150 ieee80211_determine_chantype(struct ieee80211_sub_if_data
*sdata
,
151 struct ieee80211_supported_band
*sband
,
152 struct ieee80211_channel
*channel
,
153 const struct ieee80211_ht_cap
*ht_cap
,
154 const struct ieee80211_ht_operation
*ht_oper
,
155 const struct ieee80211_vht_operation
*vht_oper
,
156 struct cfg80211_chan_def
*chandef
, bool tracking
)
158 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
159 struct cfg80211_chan_def vht_chandef
;
162 chandef
->chan
= channel
;
163 chandef
->width
= NL80211_CHAN_WIDTH_20_NOHT
;
164 chandef
->center_freq1
= channel
->center_freq
;
165 chandef
->center_freq2
= 0;
167 if (!ht_cap
|| !ht_oper
|| !sband
->ht_cap
.ht_supported
) {
168 ret
= IEEE80211_STA_DISABLE_HT
| IEEE80211_STA_DISABLE_VHT
;
172 chandef
->width
= NL80211_CHAN_WIDTH_20
;
174 if (!(ht_cap
->cap_info
&
175 cpu_to_le16(IEEE80211_HT_CAP_SUP_WIDTH_20_40
))) {
176 ret
= IEEE80211_STA_DISABLE_40MHZ
;
180 ht_cfreq
= ieee80211_channel_to_frequency(ht_oper
->primary_chan
,
182 /* check that channel matches the right operating channel */
183 if (!tracking
&& channel
->center_freq
!= ht_cfreq
) {
185 * It's possible that some APs are confused here;
186 * Netgear WNDR3700 sometimes reports 4 higher than
187 * the actual channel in association responses, but
188 * since we look at probe response/beacon data here
192 "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n",
193 channel
->center_freq
, ht_cfreq
,
194 ht_oper
->primary_chan
, channel
->band
);
195 ret
= IEEE80211_STA_DISABLE_HT
| IEEE80211_STA_DISABLE_VHT
;
199 /* check 40 MHz support, if we have it */
200 if (sband
->ht_cap
.cap
& IEEE80211_HT_CAP_SUP_WIDTH_20_40
) {
201 switch (ht_oper
->ht_param
& IEEE80211_HT_PARAM_CHA_SEC_OFFSET
) {
202 case IEEE80211_HT_PARAM_CHA_SEC_ABOVE
:
203 chandef
->width
= NL80211_CHAN_WIDTH_40
;
204 chandef
->center_freq1
+= 10;
206 case IEEE80211_HT_PARAM_CHA_SEC_BELOW
:
207 chandef
->width
= NL80211_CHAN_WIDTH_40
;
208 chandef
->center_freq1
-= 10;
212 /* 40 MHz (and 80 MHz) must be supported for VHT */
213 ret
= IEEE80211_STA_DISABLE_VHT
;
214 /* also mark 40 MHz disabled */
215 ret
|= IEEE80211_STA_DISABLE_40MHZ
;
219 if (!vht_oper
|| !sband
->vht_cap
.vht_supported
) {
220 ret
= IEEE80211_STA_DISABLE_VHT
;
224 vht_chandef
.chan
= channel
;
225 vht_chandef
.center_freq1
=
226 ieee80211_channel_to_frequency(vht_oper
->center_freq_seg1_idx
,
228 vht_chandef
.center_freq2
= 0;
230 switch (vht_oper
->chan_width
) {
231 case IEEE80211_VHT_CHANWIDTH_USE_HT
:
232 vht_chandef
.width
= chandef
->width
;
233 vht_chandef
.center_freq1
= chandef
->center_freq1
;
235 case IEEE80211_VHT_CHANWIDTH_80MHZ
:
236 vht_chandef
.width
= NL80211_CHAN_WIDTH_80
;
238 case IEEE80211_VHT_CHANWIDTH_160MHZ
:
239 vht_chandef
.width
= NL80211_CHAN_WIDTH_160
;
241 case IEEE80211_VHT_CHANWIDTH_80P80MHZ
:
242 vht_chandef
.width
= NL80211_CHAN_WIDTH_80P80
;
243 vht_chandef
.center_freq2
=
244 ieee80211_channel_to_frequency(
245 vht_oper
->center_freq_seg2_idx
,
249 if (!(ifmgd
->flags
& IEEE80211_STA_DISABLE_VHT
))
251 "AP VHT operation IE has invalid channel width (%d), disable VHT\n",
252 vht_oper
->chan_width
);
253 ret
= IEEE80211_STA_DISABLE_VHT
;
257 if (!cfg80211_chandef_valid(&vht_chandef
)) {
258 if (!(ifmgd
->flags
& IEEE80211_STA_DISABLE_VHT
))
260 "AP VHT information is invalid, disable VHT\n");
261 ret
= IEEE80211_STA_DISABLE_VHT
;
265 if (cfg80211_chandef_identical(chandef
, &vht_chandef
)) {
270 if (!cfg80211_chandef_compatible(chandef
, &vht_chandef
)) {
271 if (!(ifmgd
->flags
& IEEE80211_STA_DISABLE_VHT
))
273 "AP VHT information doesn't match HT, disable VHT\n");
274 ret
= IEEE80211_STA_DISABLE_VHT
;
278 *chandef
= vht_chandef
;
284 * When tracking the current AP, don't do any further checks if the
285 * new chandef is identical to the one we're currently using for the
286 * connection. This keeps us from playing ping-pong with regulatory,
287 * without it the following can happen (for example):
288 * - connect to an AP with 80 MHz, world regdom allows 80 MHz
289 * - AP advertises regdom US
290 * - CRDA loads regdom US with 80 MHz prohibited (old database)
291 * - the code below detects an unsupported channel, downgrades, and
292 * we disconnect from the AP in the caller
293 * - disconnect causes CRDA to reload world regdomain and the game
295 * (see https://bugzilla.kernel.org/show_bug.cgi?id=70881)
297 * It seems possible that there are still scenarios with CSA or real
298 * bandwidth changes where a this could happen, but those cases are
299 * less common and wouldn't completely prevent using the AP.
302 cfg80211_chandef_identical(chandef
, &sdata
->vif
.bss_conf
.chandef
))
305 /* don't print the message below for VHT mismatch if VHT is disabled */
306 if (ret
& IEEE80211_STA_DISABLE_VHT
)
307 vht_chandef
= *chandef
;
310 * Ignore the DISABLED flag when we're already connected and only
311 * tracking the APs beacon for bandwidth changes - otherwise we
312 * might get disconnected here if we connect to an AP, update our
313 * regulatory information based on the AP's country IE and the
314 * information we have is wrong/outdated and disables the channel
315 * that we're actually using for the connection to the AP.
317 while (!cfg80211_chandef_usable(sdata
->local
->hw
.wiphy
, chandef
,
319 IEEE80211_CHAN_DISABLED
)) {
320 if (WARN_ON(chandef
->width
== NL80211_CHAN_WIDTH_20_NOHT
)) {
321 ret
= IEEE80211_STA_DISABLE_HT
|
322 IEEE80211_STA_DISABLE_VHT
;
326 ret
|= ieee80211_chandef_downgrade(chandef
);
329 if (chandef
->width
!= vht_chandef
.width
&& !tracking
)
331 "capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n");
333 WARN_ON_ONCE(!cfg80211_chandef_valid(chandef
));
337 static int ieee80211_config_bw(struct ieee80211_sub_if_data
*sdata
,
338 struct sta_info
*sta
,
339 const struct ieee80211_ht_cap
*ht_cap
,
340 const struct ieee80211_ht_operation
*ht_oper
,
341 const struct ieee80211_vht_operation
*vht_oper
,
342 const u8
*bssid
, u32
*changed
)
344 struct ieee80211_local
*local
= sdata
->local
;
345 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
346 struct ieee80211_supported_band
*sband
;
347 struct ieee80211_channel
*chan
;
348 struct cfg80211_chan_def chandef
;
351 enum ieee80211_sta_rx_bandwidth new_sta_bw
;
354 /* if HT was/is disabled, don't track any bandwidth changes */
355 if (ifmgd
->flags
& IEEE80211_STA_DISABLE_HT
|| !ht_oper
)
358 /* don't check VHT if we associated as non-VHT station */
359 if (ifmgd
->flags
& IEEE80211_STA_DISABLE_VHT
)
362 if (WARN_ON_ONCE(!sta
))
366 * if bss configuration changed store the new one -
367 * this may be applicable even if channel is identical
369 ht_opmode
= le16_to_cpu(ht_oper
->operation_mode
);
370 if (sdata
->vif
.bss_conf
.ht_operation_mode
!= ht_opmode
) {
371 *changed
|= BSS_CHANGED_HT
;
372 sdata
->vif
.bss_conf
.ht_operation_mode
= ht_opmode
;
375 chan
= sdata
->vif
.bss_conf
.chandef
.chan
;
376 sband
= local
->hw
.wiphy
->bands
[chan
->band
];
378 /* calculate new channel (type) based on HT/VHT operation IEs */
379 flags
= ieee80211_determine_chantype(sdata
, sband
, chan
,
380 ht_cap
, ht_oper
, vht_oper
,
384 * Downgrade the new channel if we associated with restricted
385 * capabilities. For example, if we associated as a 20 MHz STA
386 * to a 40 MHz AP (due to regulatory, capabilities or config
387 * reasons) then switching to a 40 MHz channel now won't do us
388 * any good -- we couldn't use it with the AP.
390 if (ifmgd
->flags
& IEEE80211_STA_DISABLE_80P80MHZ
&&
391 chandef
.width
== NL80211_CHAN_WIDTH_80P80
)
392 flags
|= ieee80211_chandef_downgrade(&chandef
);
393 if (ifmgd
->flags
& IEEE80211_STA_DISABLE_160MHZ
&&
394 chandef
.width
== NL80211_CHAN_WIDTH_160
)
395 flags
|= ieee80211_chandef_downgrade(&chandef
);
396 if (ifmgd
->flags
& IEEE80211_STA_DISABLE_40MHZ
&&
397 chandef
.width
> NL80211_CHAN_WIDTH_20
)
398 flags
|= ieee80211_chandef_downgrade(&chandef
);
400 if (cfg80211_chandef_identical(&chandef
, &sdata
->vif
.bss_conf
.chandef
))
404 "AP %pM changed bandwidth, new config is %d MHz, width %d (%d/%d MHz)\n",
405 ifmgd
->bssid
, chandef
.chan
->center_freq
, chandef
.width
,
406 chandef
.center_freq1
, chandef
.center_freq2
);
408 if (flags
!= (ifmgd
->flags
& (IEEE80211_STA_DISABLE_HT
|
409 IEEE80211_STA_DISABLE_VHT
|
410 IEEE80211_STA_DISABLE_40MHZ
|
411 IEEE80211_STA_DISABLE_80P80MHZ
|
412 IEEE80211_STA_DISABLE_160MHZ
)) ||
413 !cfg80211_chandef_valid(&chandef
)) {
415 "AP %pM changed bandwidth in a way we can't support - disconnect\n",
420 switch (chandef
.width
) {
421 case NL80211_CHAN_WIDTH_20_NOHT
:
422 case NL80211_CHAN_WIDTH_20
:
423 new_sta_bw
= IEEE80211_STA_RX_BW_20
;
425 case NL80211_CHAN_WIDTH_40
:
426 new_sta_bw
= IEEE80211_STA_RX_BW_40
;
428 case NL80211_CHAN_WIDTH_80
:
429 new_sta_bw
= IEEE80211_STA_RX_BW_80
;
431 case NL80211_CHAN_WIDTH_80P80
:
432 case NL80211_CHAN_WIDTH_160
:
433 new_sta_bw
= IEEE80211_STA_RX_BW_160
;
439 if (new_sta_bw
> sta
->cur_max_bandwidth
)
440 new_sta_bw
= sta
->cur_max_bandwidth
;
442 if (new_sta_bw
< sta
->sta
.bandwidth
) {
443 sta
->sta
.bandwidth
= new_sta_bw
;
444 rate_control_rate_update(local
, sband
, sta
,
445 IEEE80211_RC_BW_CHANGED
);
448 ret
= ieee80211_vif_change_bandwidth(sdata
, &chandef
, changed
);
451 "AP %pM changed bandwidth to incompatible one - disconnect\n",
456 if (new_sta_bw
> sta
->sta
.bandwidth
) {
457 sta
->sta
.bandwidth
= new_sta_bw
;
458 rate_control_rate_update(local
, sband
, sta
,
459 IEEE80211_RC_BW_CHANGED
);
465 /* frame sending functions */
467 static void ieee80211_add_ht_ie(struct ieee80211_sub_if_data
*sdata
,
468 struct sk_buff
*skb
, u8 ap_ht_param
,
469 struct ieee80211_supported_band
*sband
,
470 struct ieee80211_channel
*channel
,
471 enum ieee80211_smps_mode smps
)
474 u32 flags
= channel
->flags
;
476 struct ieee80211_sta_ht_cap ht_cap
;
478 BUILD_BUG_ON(sizeof(ht_cap
) != sizeof(sband
->ht_cap
));
480 memcpy(&ht_cap
, &sband
->ht_cap
, sizeof(ht_cap
));
481 ieee80211_apply_htcap_overrides(sdata
, &ht_cap
);
483 /* determine capability flags */
486 switch (ap_ht_param
& IEEE80211_HT_PARAM_CHA_SEC_OFFSET
) {
487 case IEEE80211_HT_PARAM_CHA_SEC_ABOVE
:
488 if (flags
& IEEE80211_CHAN_NO_HT40PLUS
) {
489 cap
&= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40
;
490 cap
&= ~IEEE80211_HT_CAP_SGI_40
;
493 case IEEE80211_HT_PARAM_CHA_SEC_BELOW
:
494 if (flags
& IEEE80211_CHAN_NO_HT40MINUS
) {
495 cap
&= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40
;
496 cap
&= ~IEEE80211_HT_CAP_SGI_40
;
502 * If 40 MHz was disabled associate as though we weren't
503 * capable of 40 MHz -- some broken APs will never fall
504 * back to trying to transmit in 20 MHz.
506 if (sdata
->u
.mgd
.flags
& IEEE80211_STA_DISABLE_40MHZ
) {
507 cap
&= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40
;
508 cap
&= ~IEEE80211_HT_CAP_SGI_40
;
511 /* set SM PS mode properly */
512 cap
&= ~IEEE80211_HT_CAP_SM_PS
;
514 case IEEE80211_SMPS_AUTOMATIC
:
515 case IEEE80211_SMPS_NUM_MODES
:
517 case IEEE80211_SMPS_OFF
:
518 cap
|= WLAN_HT_CAP_SM_PS_DISABLED
<<
519 IEEE80211_HT_CAP_SM_PS_SHIFT
;
521 case IEEE80211_SMPS_STATIC
:
522 cap
|= WLAN_HT_CAP_SM_PS_STATIC
<<
523 IEEE80211_HT_CAP_SM_PS_SHIFT
;
525 case IEEE80211_SMPS_DYNAMIC
:
526 cap
|= WLAN_HT_CAP_SM_PS_DYNAMIC
<<
527 IEEE80211_HT_CAP_SM_PS_SHIFT
;
531 /* reserve and fill IE */
532 pos
= skb_put(skb
, sizeof(struct ieee80211_ht_cap
) + 2);
533 ieee80211_ie_build_ht_cap(pos
, &ht_cap
, cap
);
536 static void ieee80211_add_vht_ie(struct ieee80211_sub_if_data
*sdata
,
538 struct ieee80211_supported_band
*sband
,
539 struct ieee80211_vht_cap
*ap_vht_cap
)
543 struct ieee80211_sta_vht_cap vht_cap
;
544 u32 mask
, ap_bf_sts
, our_bf_sts
;
546 BUILD_BUG_ON(sizeof(vht_cap
) != sizeof(sband
->vht_cap
));
548 memcpy(&vht_cap
, &sband
->vht_cap
, sizeof(vht_cap
));
549 ieee80211_apply_vhtcap_overrides(sdata
, &vht_cap
);
551 /* determine capability flags */
554 if (sdata
->u
.mgd
.flags
& IEEE80211_STA_DISABLE_80P80MHZ
) {
555 u32 bw
= cap
& IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK
;
557 cap
&= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK
;
558 if (bw
== IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ
||
559 bw
== IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ
)
560 cap
|= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ
;
563 if (sdata
->u
.mgd
.flags
& IEEE80211_STA_DISABLE_160MHZ
) {
564 cap
&= ~IEEE80211_VHT_CAP_SHORT_GI_160
;
565 cap
&= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK
;
569 * Some APs apparently get confused if our capabilities are better
570 * than theirs, so restrict what we advertise in the assoc request.
572 if (!(ap_vht_cap
->vht_cap_info
&
573 cpu_to_le32(IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE
)))
574 cap
&= ~IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE
;
576 mask
= IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK
;
578 ap_bf_sts
= le32_to_cpu(ap_vht_cap
->vht_cap_info
) & mask
;
579 our_bf_sts
= cap
& mask
;
581 if (ap_bf_sts
< our_bf_sts
) {
586 /* reserve and fill IE */
587 pos
= skb_put(skb
, sizeof(struct ieee80211_vht_cap
) + 2);
588 ieee80211_ie_build_vht_cap(pos
, &vht_cap
, cap
);
591 static void ieee80211_send_assoc(struct ieee80211_sub_if_data
*sdata
)
593 struct ieee80211_local
*local
= sdata
->local
;
594 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
595 struct ieee80211_mgd_assoc_data
*assoc_data
= ifmgd
->assoc_data
;
597 struct ieee80211_mgmt
*mgmt
;
599 size_t offset
= 0, noffset
;
600 int i
, count
, rates_len
, supp_rates_len
, shift
;
602 struct ieee80211_supported_band
*sband
;
603 struct ieee80211_chanctx_conf
*chanctx_conf
;
604 struct ieee80211_channel
*chan
;
605 u32 rate_flags
, rates
= 0;
607 sdata_assert_lock(sdata
);
610 chanctx_conf
= rcu_dereference(sdata
->vif
.chanctx_conf
);
611 if (WARN_ON(!chanctx_conf
)) {
615 chan
= chanctx_conf
->def
.chan
;
616 rate_flags
= ieee80211_chandef_rate_flags(&chanctx_conf
->def
);
618 sband
= local
->hw
.wiphy
->bands
[chan
->band
];
619 shift
= ieee80211_vif_get_shift(&sdata
->vif
);
621 if (assoc_data
->supp_rates_len
) {
623 * Get all rates supported by the device and the AP as
624 * some APs don't like getting a superset of their rates
625 * in the association request (e.g. D-Link DAP 1353 in
628 rates_len
= ieee80211_parse_bitrates(&chanctx_conf
->def
, sband
,
629 assoc_data
->supp_rates
,
630 assoc_data
->supp_rates_len
,
634 * In case AP not provide any supported rates information
635 * before association, we send information element(s) with
636 * all rates that we support.
639 for (i
= 0; i
< sband
->n_bitrates
; i
++) {
640 if ((rate_flags
& sband
->bitrates
[i
].flags
)
648 skb
= alloc_skb(local
->hw
.extra_tx_headroom
+
649 sizeof(*mgmt
) + /* bit too much but doesn't matter */
650 2 + assoc_data
->ssid_len
+ /* SSID */
651 4 + rates_len
+ /* (extended) rates */
652 4 + /* power capability */
653 2 + 2 * sband
->n_channels
+ /* supported channels */
654 2 + sizeof(struct ieee80211_ht_cap
) + /* HT */
655 2 + sizeof(struct ieee80211_vht_cap
) + /* VHT */
656 assoc_data
->ie_len
+ /* extra IEs */
662 skb_reserve(skb
, local
->hw
.extra_tx_headroom
);
664 capab
= WLAN_CAPABILITY_ESS
;
666 if (sband
->band
== IEEE80211_BAND_2GHZ
) {
667 if (!(local
->hw
.flags
& IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE
))
668 capab
|= WLAN_CAPABILITY_SHORT_SLOT_TIME
;
669 if (!(local
->hw
.flags
& IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE
))
670 capab
|= WLAN_CAPABILITY_SHORT_PREAMBLE
;
673 if (assoc_data
->capability
& WLAN_CAPABILITY_PRIVACY
)
674 capab
|= WLAN_CAPABILITY_PRIVACY
;
676 if ((assoc_data
->capability
& WLAN_CAPABILITY_SPECTRUM_MGMT
) &&
677 (local
->hw
.flags
& IEEE80211_HW_SPECTRUM_MGMT
))
678 capab
|= WLAN_CAPABILITY_SPECTRUM_MGMT
;
680 if (ifmgd
->flags
& IEEE80211_STA_ENABLE_RRM
)
681 capab
|= WLAN_CAPABILITY_RADIO_MEASURE
;
683 mgmt
= (struct ieee80211_mgmt
*) skb_put(skb
, 24);
685 memcpy(mgmt
->da
, assoc_data
->bss
->bssid
, ETH_ALEN
);
686 memcpy(mgmt
->sa
, sdata
->vif
.addr
, ETH_ALEN
);
687 memcpy(mgmt
->bssid
, assoc_data
->bss
->bssid
, ETH_ALEN
);
689 if (!is_zero_ether_addr(assoc_data
->prev_bssid
)) {
691 mgmt
->frame_control
= cpu_to_le16(IEEE80211_FTYPE_MGMT
|
692 IEEE80211_STYPE_REASSOC_REQ
);
693 mgmt
->u
.reassoc_req
.capab_info
= cpu_to_le16(capab
);
694 mgmt
->u
.reassoc_req
.listen_interval
=
695 cpu_to_le16(local
->hw
.conf
.listen_interval
);
696 memcpy(mgmt
->u
.reassoc_req
.current_ap
, assoc_data
->prev_bssid
,
700 mgmt
->frame_control
= cpu_to_le16(IEEE80211_FTYPE_MGMT
|
701 IEEE80211_STYPE_ASSOC_REQ
);
702 mgmt
->u
.assoc_req
.capab_info
= cpu_to_le16(capab
);
703 mgmt
->u
.assoc_req
.listen_interval
=
704 cpu_to_le16(local
->hw
.conf
.listen_interval
);
708 pos
= skb_put(skb
, 2 + assoc_data
->ssid_len
);
709 *pos
++ = WLAN_EID_SSID
;
710 *pos
++ = assoc_data
->ssid_len
;
711 memcpy(pos
, assoc_data
->ssid
, assoc_data
->ssid_len
);
713 /* add all rates which were marked to be used above */
714 supp_rates_len
= rates_len
;
715 if (supp_rates_len
> 8)
718 pos
= skb_put(skb
, supp_rates_len
+ 2);
719 *pos
++ = WLAN_EID_SUPP_RATES
;
720 *pos
++ = supp_rates_len
;
723 for (i
= 0; i
< sband
->n_bitrates
; i
++) {
724 if (BIT(i
) & rates
) {
725 int rate
= DIV_ROUND_UP(sband
->bitrates
[i
].bitrate
,
733 if (rates_len
> count
) {
734 pos
= skb_put(skb
, rates_len
- count
+ 2);
735 *pos
++ = WLAN_EID_EXT_SUPP_RATES
;
736 *pos
++ = rates_len
- count
;
738 for (i
++; i
< sband
->n_bitrates
; i
++) {
739 if (BIT(i
) & rates
) {
741 rate
= DIV_ROUND_UP(sband
->bitrates
[i
].bitrate
,
748 if (capab
& WLAN_CAPABILITY_SPECTRUM_MGMT
||
749 capab
& WLAN_CAPABILITY_RADIO_MEASURE
) {
750 pos
= skb_put(skb
, 4);
751 *pos
++ = WLAN_EID_PWR_CAPABILITY
;
753 *pos
++ = 0; /* min tx power */
755 *pos
++ = ieee80211_chandef_max_power(&chanctx_conf
->def
);
758 if (capab
& WLAN_CAPABILITY_SPECTRUM_MGMT
) {
759 /* TODO: get this in reg domain format */
760 pos
= skb_put(skb
, 2 * sband
->n_channels
+ 2);
761 *pos
++ = WLAN_EID_SUPPORTED_CHANNELS
;
762 *pos
++ = 2 * sband
->n_channels
;
763 for (i
= 0; i
< sband
->n_channels
; i
++) {
764 *pos
++ = ieee80211_frequency_to_channel(
765 sband
->channels
[i
].center_freq
);
766 *pos
++ = 1; /* one channel in the subband*/
770 /* if present, add any custom IEs that go before HT */
771 if (assoc_data
->ie_len
) {
772 static const u8 before_ht
[] = {
775 WLAN_EID_EXT_SUPP_RATES
,
776 WLAN_EID_PWR_CAPABILITY
,
777 WLAN_EID_SUPPORTED_CHANNELS
,
780 WLAN_EID_RRM_ENABLED_CAPABILITIES
,
781 WLAN_EID_MOBILITY_DOMAIN
,
782 WLAN_EID_FAST_BSS_TRANSITION
, /* reassoc only */
783 WLAN_EID_RIC_DATA
, /* reassoc only */
784 WLAN_EID_SUPPORTED_REGULATORY_CLASSES
,
786 static const u8 after_ric
[] = {
787 WLAN_EID_SUPPORTED_REGULATORY_CLASSES
,
788 WLAN_EID_HT_CAPABILITY
,
789 WLAN_EID_BSS_COEX_2040
,
790 WLAN_EID_EXT_CAPABILITY
,
791 WLAN_EID_QOS_TRAFFIC_CAPA
,
792 WLAN_EID_TIM_BCAST_REQ
,
793 WLAN_EID_INTERWORKING
,
794 /* 60GHz doesn't happen right now */
795 WLAN_EID_VHT_CAPABILITY
,
796 WLAN_EID_OPMODE_NOTIF
,
799 noffset
= ieee80211_ie_split_ric(assoc_data
->ie
,
802 ARRAY_SIZE(before_ht
),
804 ARRAY_SIZE(after_ric
),
806 pos
= skb_put(skb
, noffset
- offset
);
807 memcpy(pos
, assoc_data
->ie
+ offset
, noffset
- offset
);
811 if (WARN_ON_ONCE((ifmgd
->flags
& IEEE80211_STA_DISABLE_HT
) &&
812 !(ifmgd
->flags
& IEEE80211_STA_DISABLE_VHT
)))
813 ifmgd
->flags
|= IEEE80211_STA_DISABLE_VHT
;
815 if (!(ifmgd
->flags
& IEEE80211_STA_DISABLE_HT
))
816 ieee80211_add_ht_ie(sdata
, skb
, assoc_data
->ap_ht_param
,
817 sband
, chan
, sdata
->smps_mode
);
819 /* if present, add any custom IEs that go before VHT */
820 if (assoc_data
->ie_len
) {
821 static const u8 before_vht
[] = {
824 WLAN_EID_EXT_SUPP_RATES
,
825 WLAN_EID_PWR_CAPABILITY
,
826 WLAN_EID_SUPPORTED_CHANNELS
,
829 WLAN_EID_RRM_ENABLED_CAPABILITIES
,
830 WLAN_EID_MOBILITY_DOMAIN
,
831 WLAN_EID_SUPPORTED_REGULATORY_CLASSES
,
832 WLAN_EID_HT_CAPABILITY
,
833 WLAN_EID_BSS_COEX_2040
,
834 WLAN_EID_EXT_CAPABILITY
,
835 WLAN_EID_QOS_TRAFFIC_CAPA
,
836 WLAN_EID_TIM_BCAST_REQ
,
837 WLAN_EID_INTERWORKING
,
840 /* RIC already taken above, so no need to handle here anymore */
841 noffset
= ieee80211_ie_split(assoc_data
->ie
, assoc_data
->ie_len
,
842 before_vht
, ARRAY_SIZE(before_vht
),
844 pos
= skb_put(skb
, noffset
- offset
);
845 memcpy(pos
, assoc_data
->ie
+ offset
, noffset
- offset
);
849 if (!(ifmgd
->flags
& IEEE80211_STA_DISABLE_VHT
))
850 ieee80211_add_vht_ie(sdata
, skb
, sband
,
851 &assoc_data
->ap_vht_cap
);
853 /* if present, add any custom non-vendor IEs that go after HT */
854 if (assoc_data
->ie_len
) {
855 noffset
= ieee80211_ie_split_vendor(assoc_data
->ie
,
858 pos
= skb_put(skb
, noffset
- offset
);
859 memcpy(pos
, assoc_data
->ie
+ offset
, noffset
- offset
);
863 if (assoc_data
->wmm
) {
864 if (assoc_data
->uapsd
) {
865 qos_info
= ifmgd
->uapsd_queues
;
866 qos_info
|= (ifmgd
->uapsd_max_sp_len
<<
867 IEEE80211_WMM_IE_STA_QOSINFO_SP_SHIFT
);
872 pos
= ieee80211_add_wmm_info_ie(skb_put(skb
, 9), qos_info
);
875 /* add any remaining custom (i.e. vendor specific here) IEs */
876 if (assoc_data
->ie_len
) {
877 noffset
= assoc_data
->ie_len
;
878 pos
= skb_put(skb
, noffset
- offset
);
879 memcpy(pos
, assoc_data
->ie
+ offset
, noffset
- offset
);
882 drv_mgd_prepare_tx(local
, sdata
);
884 IEEE80211_SKB_CB(skb
)->flags
|= IEEE80211_TX_INTFL_DONT_ENCRYPT
;
885 if (local
->hw
.flags
& IEEE80211_HW_REPORTS_TX_ACK_STATUS
)
886 IEEE80211_SKB_CB(skb
)->flags
|= IEEE80211_TX_CTL_REQ_TX_STATUS
|
887 IEEE80211_TX_INTFL_MLME_CONN_TX
;
888 ieee80211_tx_skb(sdata
, skb
);
891 void ieee80211_send_pspoll(struct ieee80211_local
*local
,
892 struct ieee80211_sub_if_data
*sdata
)
894 struct ieee80211_pspoll
*pspoll
;
897 skb
= ieee80211_pspoll_get(&local
->hw
, &sdata
->vif
);
901 pspoll
= (struct ieee80211_pspoll
*) skb
->data
;
902 pspoll
->frame_control
|= cpu_to_le16(IEEE80211_FCTL_PM
);
904 IEEE80211_SKB_CB(skb
)->flags
|= IEEE80211_TX_INTFL_DONT_ENCRYPT
;
905 ieee80211_tx_skb(sdata
, skb
);
908 void ieee80211_send_nullfunc(struct ieee80211_local
*local
,
909 struct ieee80211_sub_if_data
*sdata
,
913 struct ieee80211_hdr_3addr
*nullfunc
;
914 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
916 skb
= ieee80211_nullfunc_get(&local
->hw
, &sdata
->vif
);
920 nullfunc
= (struct ieee80211_hdr_3addr
*) skb
->data
;
922 nullfunc
->frame_control
|= cpu_to_le16(IEEE80211_FCTL_PM
);
924 IEEE80211_SKB_CB(skb
)->flags
|= IEEE80211_TX_INTFL_DONT_ENCRYPT
|
925 IEEE80211_TX_INTFL_OFFCHAN_TX_OK
;
927 if (local
->hw
.flags
& IEEE80211_HW_REPORTS_TX_ACK_STATUS
)
928 IEEE80211_SKB_CB(skb
)->flags
|= IEEE80211_TX_CTL_REQ_TX_STATUS
;
930 if (ifmgd
->flags
& IEEE80211_STA_CONNECTION_POLL
)
931 IEEE80211_SKB_CB(skb
)->flags
|= IEEE80211_TX_CTL_USE_MINRATE
;
933 ieee80211_tx_skb(sdata
, skb
);
936 static void ieee80211_send_4addr_nullfunc(struct ieee80211_local
*local
,
937 struct ieee80211_sub_if_data
*sdata
)
940 struct ieee80211_hdr
*nullfunc
;
943 if (WARN_ON(sdata
->vif
.type
!= NL80211_IFTYPE_STATION
))
946 skb
= dev_alloc_skb(local
->hw
.extra_tx_headroom
+ 30);
950 skb_reserve(skb
, local
->hw
.extra_tx_headroom
);
952 nullfunc
= (struct ieee80211_hdr
*) skb_put(skb
, 30);
953 memset(nullfunc
, 0, 30);
954 fc
= cpu_to_le16(IEEE80211_FTYPE_DATA
| IEEE80211_STYPE_NULLFUNC
|
955 IEEE80211_FCTL_FROMDS
| IEEE80211_FCTL_TODS
);
956 nullfunc
->frame_control
= fc
;
957 memcpy(nullfunc
->addr1
, sdata
->u
.mgd
.bssid
, ETH_ALEN
);
958 memcpy(nullfunc
->addr2
, sdata
->vif
.addr
, ETH_ALEN
);
959 memcpy(nullfunc
->addr3
, sdata
->u
.mgd
.bssid
, ETH_ALEN
);
960 memcpy(nullfunc
->addr4
, sdata
->vif
.addr
, ETH_ALEN
);
962 IEEE80211_SKB_CB(skb
)->flags
|= IEEE80211_TX_INTFL_DONT_ENCRYPT
;
963 ieee80211_tx_skb(sdata
, skb
);
966 /* spectrum management related things */
967 static void ieee80211_chswitch_work(struct work_struct
*work
)
969 struct ieee80211_sub_if_data
*sdata
=
970 container_of(work
, struct ieee80211_sub_if_data
, u
.mgd
.chswitch_work
);
971 struct ieee80211_local
*local
= sdata
->local
;
972 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
975 if (!ieee80211_sdata_running(sdata
))
979 mutex_lock(&local
->mtx
);
980 mutex_lock(&local
->chanctx_mtx
);
982 if (!ifmgd
->associated
)
985 if (!sdata
->vif
.csa_active
)
989 * using reservation isn't immediate as it may be deferred until later
990 * with multi-vif. once reservation is complete it will re-schedule the
991 * work with no reserved_chanctx so verify chandef to check if it
992 * completed successfully
995 if (sdata
->reserved_chanctx
) {
997 * with multi-vif csa driver may call ieee80211_csa_finish()
998 * many times while waiting for other interfaces to use their
1001 if (sdata
->reserved_ready
)
1004 ret
= ieee80211_vif_use_reserved_context(sdata
);
1007 "failed to use reserved channel context, disconnecting (err=%d)\n",
1009 ieee80211_queue_work(&sdata
->local
->hw
,
1010 &ifmgd
->csa_connection_drop_work
);
1017 if (!cfg80211_chandef_identical(&sdata
->vif
.bss_conf
.chandef
,
1018 &sdata
->csa_chandef
)) {
1020 "failed to finalize channel switch, disconnecting\n");
1021 ieee80211_queue_work(&sdata
->local
->hw
,
1022 &ifmgd
->csa_connection_drop_work
);
1026 /* XXX: shouldn't really modify cfg80211-owned data! */
1027 ifmgd
->associated
->channel
= sdata
->csa_chandef
.chan
;
1029 ifmgd
->csa_waiting_bcn
= true;
1031 ieee80211_sta_reset_beacon_monitor(sdata
);
1032 ieee80211_sta_reset_conn_monitor(sdata
);
1035 mutex_unlock(&local
->chanctx_mtx
);
1036 mutex_unlock(&local
->mtx
);
1037 sdata_unlock(sdata
);
1040 static void ieee80211_chswitch_post_beacon(struct ieee80211_sub_if_data
*sdata
)
1042 struct ieee80211_local
*local
= sdata
->local
;
1043 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1046 sdata_assert_lock(sdata
);
1048 WARN_ON(!sdata
->vif
.csa_active
);
1050 if (sdata
->csa_block_tx
) {
1051 ieee80211_wake_vif_queues(local
, sdata
,
1052 IEEE80211_QUEUE_STOP_REASON_CSA
);
1053 sdata
->csa_block_tx
= false;
1056 sdata
->vif
.csa_active
= false;
1057 ifmgd
->csa_waiting_bcn
= false;
1059 ret
= drv_post_channel_switch(sdata
);
1062 "driver post channel switch failed, disconnecting\n");
1063 ieee80211_queue_work(&local
->hw
,
1064 &ifmgd
->csa_connection_drop_work
);
1068 cfg80211_ch_switch_notify(sdata
->dev
, &sdata
->reserved_chandef
);
1071 void ieee80211_chswitch_done(struct ieee80211_vif
*vif
, bool success
)
1073 struct ieee80211_sub_if_data
*sdata
= vif_to_sdata(vif
);
1074 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1076 trace_api_chswitch_done(sdata
, success
);
1079 "driver channel switch failed, disconnecting\n");
1080 ieee80211_queue_work(&sdata
->local
->hw
,
1081 &ifmgd
->csa_connection_drop_work
);
1083 ieee80211_queue_work(&sdata
->local
->hw
, &ifmgd
->chswitch_work
);
1086 EXPORT_SYMBOL(ieee80211_chswitch_done
);
1088 static void ieee80211_chswitch_timer(unsigned long data
)
1090 struct ieee80211_sub_if_data
*sdata
=
1091 (struct ieee80211_sub_if_data
*) data
;
1093 ieee80211_queue_work(&sdata
->local
->hw
, &sdata
->u
.mgd
.chswitch_work
);
1097 ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data
*sdata
,
1098 u64 timestamp
, u32 device_timestamp
,
1099 struct ieee802_11_elems
*elems
,
1102 struct ieee80211_local
*local
= sdata
->local
;
1103 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1104 struct cfg80211_bss
*cbss
= ifmgd
->associated
;
1105 struct ieee80211_chanctx_conf
*conf
;
1106 struct ieee80211_chanctx
*chanctx
;
1107 enum ieee80211_band current_band
;
1108 struct ieee80211_csa_ie csa_ie
;
1109 struct ieee80211_channel_switch ch_switch
;
1112 sdata_assert_lock(sdata
);
1117 if (local
->scanning
)
1120 /* disregard subsequent announcements if we are already processing */
1121 if (sdata
->vif
.csa_active
)
1124 current_band
= cbss
->channel
->band
;
1125 memset(&csa_ie
, 0, sizeof(csa_ie
));
1126 res
= ieee80211_parse_ch_switch_ie(sdata
, elems
, current_band
,
1128 ifmgd
->associated
->bssid
, &csa_ie
);
1130 ieee80211_queue_work(&local
->hw
,
1131 &ifmgd
->csa_connection_drop_work
);
1135 if (!cfg80211_chandef_usable(local
->hw
.wiphy
, &csa_ie
.chandef
,
1136 IEEE80211_CHAN_DISABLED
)) {
1138 "AP %pM switches to unsupported channel (%d MHz, width:%d, CF1/2: %d/%d MHz), disconnecting\n",
1139 ifmgd
->associated
->bssid
,
1140 csa_ie
.chandef
.chan
->center_freq
,
1141 csa_ie
.chandef
.width
, csa_ie
.chandef
.center_freq1
,
1142 csa_ie
.chandef
.center_freq2
);
1143 ieee80211_queue_work(&local
->hw
,
1144 &ifmgd
->csa_connection_drop_work
);
1148 mutex_lock(&local
->mtx
);
1149 mutex_lock(&local
->chanctx_mtx
);
1150 conf
= rcu_dereference_protected(sdata
->vif
.chanctx_conf
,
1151 lockdep_is_held(&local
->chanctx_mtx
));
1154 "no channel context assigned to vif?, disconnecting\n");
1155 ieee80211_queue_work(&local
->hw
,
1156 &ifmgd
->csa_connection_drop_work
);
1157 mutex_unlock(&local
->chanctx_mtx
);
1158 mutex_unlock(&local
->mtx
);
1162 chanctx
= container_of(conf
, struct ieee80211_chanctx
, conf
);
1164 if (local
->use_chanctx
&&
1165 !(local
->hw
.flags
& IEEE80211_HW_CHANCTX_STA_CSA
)) {
1167 "driver doesn't support chan-switch with channel contexts\n");
1168 ieee80211_queue_work(&local
->hw
,
1169 &ifmgd
->csa_connection_drop_work
);
1170 mutex_unlock(&local
->chanctx_mtx
);
1171 mutex_unlock(&local
->mtx
);
1175 ch_switch
.timestamp
= timestamp
;
1176 ch_switch
.device_timestamp
= device_timestamp
;
1177 ch_switch
.block_tx
= csa_ie
.mode
;
1178 ch_switch
.chandef
= csa_ie
.chandef
;
1179 ch_switch
.count
= csa_ie
.count
;
1181 if (drv_pre_channel_switch(sdata
, &ch_switch
)) {
1183 "preparing for channel switch failed, disconnecting\n");
1184 ieee80211_queue_work(&local
->hw
,
1185 &ifmgd
->csa_connection_drop_work
);
1186 mutex_unlock(&local
->chanctx_mtx
);
1187 mutex_unlock(&local
->mtx
);
1191 res
= ieee80211_vif_reserve_chanctx(sdata
, &csa_ie
.chandef
,
1192 chanctx
->mode
, false);
1195 "failed to reserve channel context for channel switch, disconnecting (err=%d)\n",
1197 ieee80211_queue_work(&local
->hw
,
1198 &ifmgd
->csa_connection_drop_work
);
1199 mutex_unlock(&local
->chanctx_mtx
);
1200 mutex_unlock(&local
->mtx
);
1203 mutex_unlock(&local
->chanctx_mtx
);
1205 sdata
->vif
.csa_active
= true;
1206 sdata
->csa_chandef
= csa_ie
.chandef
;
1207 sdata
->csa_block_tx
= csa_ie
.mode
;
1209 if (sdata
->csa_block_tx
)
1210 ieee80211_stop_vif_queues(local
, sdata
,
1211 IEEE80211_QUEUE_STOP_REASON_CSA
);
1212 mutex_unlock(&local
->mtx
);
1214 cfg80211_ch_switch_started_notify(sdata
->dev
, &csa_ie
.chandef
,
1217 if (local
->ops
->channel_switch
) {
1218 /* use driver's channel switch callback */
1219 drv_channel_switch(local
, sdata
, &ch_switch
);
1223 /* channel switch handled in software */
1224 if (csa_ie
.count
<= 1)
1225 ieee80211_queue_work(&local
->hw
, &ifmgd
->chswitch_work
);
1227 mod_timer(&ifmgd
->chswitch_timer
,
1228 TU_TO_EXP_TIME((csa_ie
.count
- 1) *
1229 cbss
->beacon_interval
));
1233 ieee80211_find_80211h_pwr_constr(struct ieee80211_sub_if_data
*sdata
,
1234 struct ieee80211_channel
*channel
,
1235 const u8
*country_ie
, u8 country_ie_len
,
1236 const u8
*pwr_constr_elem
,
1237 int *chan_pwr
, int *pwr_reduction
)
1239 struct ieee80211_country_ie_triplet
*triplet
;
1240 int chan
= ieee80211_frequency_to_channel(channel
->center_freq
);
1241 int i
, chan_increment
;
1242 bool have_chan_pwr
= false;
1245 if (country_ie_len
% 2 || country_ie_len
< IEEE80211_COUNTRY_IE_MIN_LEN
)
1248 triplet
= (void *)(country_ie
+ 3);
1249 country_ie_len
-= 3;
1251 switch (channel
->band
) {
1255 case IEEE80211_BAND_2GHZ
:
1256 case IEEE80211_BAND_60GHZ
:
1259 case IEEE80211_BAND_5GHZ
:
1265 while (country_ie_len
>= 3) {
1266 u8 first_channel
= triplet
->chans
.first_channel
;
1268 if (first_channel
>= IEEE80211_COUNTRY_EXTENSION_ID
)
1271 for (i
= 0; i
< triplet
->chans
.num_channels
; i
++) {
1272 if (first_channel
+ i
* chan_increment
== chan
) {
1273 have_chan_pwr
= true;
1274 *chan_pwr
= triplet
->chans
.max_power
;
1283 country_ie_len
-= 3;
1287 *pwr_reduction
= *pwr_constr_elem
;
1288 return have_chan_pwr
;
1291 static void ieee80211_find_cisco_dtpc(struct ieee80211_sub_if_data
*sdata
,
1292 struct ieee80211_channel
*channel
,
1293 const u8
*cisco_dtpc_ie
,
1296 /* From practical testing, the first data byte of the DTPC element
1297 * seems to contain the requested dBm level, and the CLI on Cisco
1298 * APs clearly state the range is -127 to 127 dBm, which indicates
1299 * a signed byte, although it seemingly never actually goes negative.
1300 * The other byte seems to always be zero.
1302 *pwr_level
= (__s8
)cisco_dtpc_ie
[4];
1305 static u32
ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data
*sdata
,
1306 struct ieee80211_channel
*channel
,
1307 struct ieee80211_mgmt
*mgmt
,
1308 const u8
*country_ie
, u8 country_ie_len
,
1309 const u8
*pwr_constr_ie
,
1310 const u8
*cisco_dtpc_ie
)
1312 bool has_80211h_pwr
= false, has_cisco_pwr
= false;
1313 int chan_pwr
= 0, pwr_reduction_80211h
= 0;
1314 int pwr_level_cisco
, pwr_level_80211h
;
1317 if (country_ie
&& pwr_constr_ie
&&
1318 mgmt
->u
.probe_resp
.capab_info
&
1319 cpu_to_le16(WLAN_CAPABILITY_SPECTRUM_MGMT
)) {
1320 has_80211h_pwr
= ieee80211_find_80211h_pwr_constr(
1321 sdata
, channel
, country_ie
, country_ie_len
,
1322 pwr_constr_ie
, &chan_pwr
, &pwr_reduction_80211h
);
1324 max_t(int, 0, chan_pwr
- pwr_reduction_80211h
);
1327 if (cisco_dtpc_ie
) {
1328 ieee80211_find_cisco_dtpc(
1329 sdata
, channel
, cisco_dtpc_ie
, &pwr_level_cisco
);
1330 has_cisco_pwr
= true;
1333 if (!has_80211h_pwr
&& !has_cisco_pwr
)
1336 /* If we have both 802.11h and Cisco DTPC, apply both limits
1337 * by picking the smallest of the two power levels advertised.
1339 if (has_80211h_pwr
&&
1340 (!has_cisco_pwr
|| pwr_level_80211h
<= pwr_level_cisco
)) {
1342 "Limiting TX power to %d (%d - %d) dBm as advertised by %pM\n",
1343 pwr_level_80211h
, chan_pwr
, pwr_reduction_80211h
,
1344 sdata
->u
.mgd
.bssid
);
1345 new_ap_level
= pwr_level_80211h
;
1346 } else { /* has_cisco_pwr is always true here. */
1348 "Limiting TX power to %d dBm as advertised by %pM\n",
1349 pwr_level_cisco
, sdata
->u
.mgd
.bssid
);
1350 new_ap_level
= pwr_level_cisco
;
1353 if (sdata
->ap_power_level
== new_ap_level
)
1356 sdata
->ap_power_level
= new_ap_level
;
1357 if (__ieee80211_recalc_txpower(sdata
))
1358 return BSS_CHANGED_TXPOWER
;
1363 static void ieee80211_enable_ps(struct ieee80211_local
*local
,
1364 struct ieee80211_sub_if_data
*sdata
)
1366 struct ieee80211_conf
*conf
= &local
->hw
.conf
;
1369 * If we are scanning right now then the parameters will
1370 * take effect when scan finishes.
1372 if (local
->scanning
)
1375 if (conf
->dynamic_ps_timeout
> 0 &&
1376 !(local
->hw
.flags
& IEEE80211_HW_SUPPORTS_DYNAMIC_PS
)) {
1377 mod_timer(&local
->dynamic_ps_timer
, jiffies
+
1378 msecs_to_jiffies(conf
->dynamic_ps_timeout
));
1380 if (local
->hw
.flags
& IEEE80211_HW_PS_NULLFUNC_STACK
)
1381 ieee80211_send_nullfunc(local
, sdata
, 1);
1383 if ((local
->hw
.flags
& IEEE80211_HW_PS_NULLFUNC_STACK
) &&
1384 (local
->hw
.flags
& IEEE80211_HW_REPORTS_TX_ACK_STATUS
))
1387 conf
->flags
|= IEEE80211_CONF_PS
;
1388 ieee80211_hw_config(local
, IEEE80211_CONF_CHANGE_PS
);
1392 static void ieee80211_change_ps(struct ieee80211_local
*local
)
1394 struct ieee80211_conf
*conf
= &local
->hw
.conf
;
1396 if (local
->ps_sdata
) {
1397 ieee80211_enable_ps(local
, local
->ps_sdata
);
1398 } else if (conf
->flags
& IEEE80211_CONF_PS
) {
1399 conf
->flags
&= ~IEEE80211_CONF_PS
;
1400 ieee80211_hw_config(local
, IEEE80211_CONF_CHANGE_PS
);
1401 del_timer_sync(&local
->dynamic_ps_timer
);
1402 cancel_work_sync(&local
->dynamic_ps_enable_work
);
1406 static bool ieee80211_powersave_allowed(struct ieee80211_sub_if_data
*sdata
)
1408 struct ieee80211_if_managed
*mgd
= &sdata
->u
.mgd
;
1409 struct sta_info
*sta
= NULL
;
1410 bool authorized
= false;
1412 if (!mgd
->powersave
)
1418 if (!mgd
->associated
)
1421 if (mgd
->flags
& IEEE80211_STA_CONNECTION_POLL
)
1424 if (!mgd
->have_beacon
)
1428 sta
= sta_info_get(sdata
, mgd
->bssid
);
1430 authorized
= test_sta_flag(sta
, WLAN_STA_AUTHORIZED
);
1436 /* need to hold RTNL or interface lock */
1437 void ieee80211_recalc_ps(struct ieee80211_local
*local
, s32 latency
)
1439 struct ieee80211_sub_if_data
*sdata
, *found
= NULL
;
1443 if (!(local
->hw
.flags
& IEEE80211_HW_SUPPORTS_PS
)) {
1444 local
->ps_sdata
= NULL
;
1448 list_for_each_entry(sdata
, &local
->interfaces
, list
) {
1449 if (!ieee80211_sdata_running(sdata
))
1451 if (sdata
->vif
.type
== NL80211_IFTYPE_AP
) {
1452 /* If an AP vif is found, then disable PS
1453 * by setting the count to zero thereby setting
1459 if (sdata
->vif
.type
!= NL80211_IFTYPE_STATION
)
1465 if (count
== 1 && ieee80211_powersave_allowed(found
)) {
1469 latency
= pm_qos_request(PM_QOS_NETWORK_LATENCY
);
1471 beaconint_us
= ieee80211_tu_to_usec(
1472 found
->vif
.bss_conf
.beacon_int
);
1474 timeout
= local
->dynamic_ps_forced_timeout
;
1477 * Go to full PSM if the user configures a very low
1478 * latency requirement.
1479 * The 2000 second value is there for compatibility
1480 * until the PM_QOS_NETWORK_LATENCY is configured
1483 if (latency
> (1900 * USEC_PER_MSEC
) &&
1484 latency
!= (2000 * USEC_PER_SEC
))
1489 local
->hw
.conf
.dynamic_ps_timeout
= timeout
;
1491 if (beaconint_us
> latency
) {
1492 local
->ps_sdata
= NULL
;
1495 u8 dtimper
= found
->u
.mgd
.dtim_period
;
1497 /* If the TIM IE is invalid, pretend the value is 1 */
1500 else if (dtimper
> 1)
1501 maxslp
= min_t(int, dtimper
,
1502 latency
/ beaconint_us
);
1504 local
->hw
.conf
.max_sleep_period
= maxslp
;
1505 local
->hw
.conf
.ps_dtim_period
= dtimper
;
1506 local
->ps_sdata
= found
;
1509 local
->ps_sdata
= NULL
;
1512 ieee80211_change_ps(local
);
1515 void ieee80211_recalc_ps_vif(struct ieee80211_sub_if_data
*sdata
)
1517 bool ps_allowed
= ieee80211_powersave_allowed(sdata
);
1519 if (sdata
->vif
.bss_conf
.ps
!= ps_allowed
) {
1520 sdata
->vif
.bss_conf
.ps
= ps_allowed
;
1521 ieee80211_bss_info_change_notify(sdata
, BSS_CHANGED_PS
);
1525 void ieee80211_dynamic_ps_disable_work(struct work_struct
*work
)
1527 struct ieee80211_local
*local
=
1528 container_of(work
, struct ieee80211_local
,
1529 dynamic_ps_disable_work
);
1531 if (local
->hw
.conf
.flags
& IEEE80211_CONF_PS
) {
1532 local
->hw
.conf
.flags
&= ~IEEE80211_CONF_PS
;
1533 ieee80211_hw_config(local
, IEEE80211_CONF_CHANGE_PS
);
1536 ieee80211_wake_queues_by_reason(&local
->hw
,
1537 IEEE80211_MAX_QUEUE_MAP
,
1538 IEEE80211_QUEUE_STOP_REASON_PS
,
1542 void ieee80211_dynamic_ps_enable_work(struct work_struct
*work
)
1544 struct ieee80211_local
*local
=
1545 container_of(work
, struct ieee80211_local
,
1546 dynamic_ps_enable_work
);
1547 struct ieee80211_sub_if_data
*sdata
= local
->ps_sdata
;
1548 struct ieee80211_if_managed
*ifmgd
;
1549 unsigned long flags
;
1552 /* can only happen when PS was just disabled anyway */
1556 ifmgd
= &sdata
->u
.mgd
;
1558 if (local
->hw
.conf
.flags
& IEEE80211_CONF_PS
)
1561 if (local
->hw
.conf
.dynamic_ps_timeout
> 0) {
1562 /* don't enter PS if TX frames are pending */
1563 if (drv_tx_frames_pending(local
)) {
1564 mod_timer(&local
->dynamic_ps_timer
, jiffies
+
1566 local
->hw
.conf
.dynamic_ps_timeout
));
1571 * transmission can be stopped by others which leads to
1572 * dynamic_ps_timer expiry. Postpone the ps timer if it
1573 * is not the actual idle state.
1575 spin_lock_irqsave(&local
->queue_stop_reason_lock
, flags
);
1576 for (q
= 0; q
< local
->hw
.queues
; q
++) {
1577 if (local
->queue_stop_reasons
[q
]) {
1578 spin_unlock_irqrestore(&local
->queue_stop_reason_lock
,
1580 mod_timer(&local
->dynamic_ps_timer
, jiffies
+
1582 local
->hw
.conf
.dynamic_ps_timeout
));
1586 spin_unlock_irqrestore(&local
->queue_stop_reason_lock
, flags
);
1589 if ((local
->hw
.flags
& IEEE80211_HW_PS_NULLFUNC_STACK
) &&
1590 !(ifmgd
->flags
& IEEE80211_STA_NULLFUNC_ACKED
)) {
1591 if (drv_tx_frames_pending(local
)) {
1592 mod_timer(&local
->dynamic_ps_timer
, jiffies
+
1594 local
->hw
.conf
.dynamic_ps_timeout
));
1596 ieee80211_send_nullfunc(local
, sdata
, 1);
1597 /* Flush to get the tx status of nullfunc frame */
1598 ieee80211_flush_queues(local
, sdata
);
1602 if (!((local
->hw
.flags
& IEEE80211_HW_REPORTS_TX_ACK_STATUS
) &&
1603 (local
->hw
.flags
& IEEE80211_HW_PS_NULLFUNC_STACK
)) ||
1604 (ifmgd
->flags
& IEEE80211_STA_NULLFUNC_ACKED
)) {
1605 ifmgd
->flags
&= ~IEEE80211_STA_NULLFUNC_ACKED
;
1606 local
->hw
.conf
.flags
|= IEEE80211_CONF_PS
;
1607 ieee80211_hw_config(local
, IEEE80211_CONF_CHANGE_PS
);
1611 void ieee80211_dynamic_ps_timer(unsigned long data
)
1613 struct ieee80211_local
*local
= (void *) data
;
1615 if (local
->quiescing
|| local
->suspended
)
1618 ieee80211_queue_work(&local
->hw
, &local
->dynamic_ps_enable_work
);
1621 void ieee80211_dfs_cac_timer_work(struct work_struct
*work
)
1623 struct delayed_work
*delayed_work
=
1624 container_of(work
, struct delayed_work
, work
);
1625 struct ieee80211_sub_if_data
*sdata
=
1626 container_of(delayed_work
, struct ieee80211_sub_if_data
,
1627 dfs_cac_timer_work
);
1628 struct cfg80211_chan_def chandef
= sdata
->vif
.bss_conf
.chandef
;
1630 mutex_lock(&sdata
->local
->mtx
);
1631 if (sdata
->wdev
.cac_started
) {
1632 ieee80211_vif_release_channel(sdata
);
1633 cfg80211_cac_event(sdata
->dev
, &chandef
,
1634 NL80211_RADAR_CAC_FINISHED
,
1637 mutex_unlock(&sdata
->local
->mtx
);
1641 __ieee80211_sta_handle_tspec_ac_params(struct ieee80211_sub_if_data
*sdata
)
1643 struct ieee80211_local
*local
= sdata
->local
;
1644 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1648 if (local
->hw
.queues
< IEEE80211_NUM_ACS
)
1651 for (ac
= 0; ac
< IEEE80211_NUM_ACS
; ac
++) {
1652 struct ieee80211_sta_tx_tspec
*tx_tspec
= &ifmgd
->tx_tspec
[ac
];
1654 unsigned long now
= jiffies
;
1656 if (tx_tspec
->action
== TX_TSPEC_ACTION_NONE
&&
1657 tx_tspec
->admitted_time
&&
1658 time_after(now
, tx_tspec
->time_slice_start
+ HZ
)) {
1659 tx_tspec
->consumed_tx_time
= 0;
1660 tx_tspec
->time_slice_start
= now
;
1662 if (tx_tspec
->downgraded
)
1664 TX_TSPEC_ACTION_STOP_DOWNGRADE
;
1667 switch (tx_tspec
->action
) {
1668 case TX_TSPEC_ACTION_STOP_DOWNGRADE
:
1669 /* take the original parameters */
1670 if (drv_conf_tx(local
, sdata
, ac
, &sdata
->tx_conf
[ac
]))
1672 "failed to set TX queue parameters for queue %d\n",
1674 tx_tspec
->action
= TX_TSPEC_ACTION_NONE
;
1675 tx_tspec
->downgraded
= false;
1678 case TX_TSPEC_ACTION_DOWNGRADE
:
1679 if (time_after(now
, tx_tspec
->time_slice_start
+ HZ
)) {
1680 tx_tspec
->action
= TX_TSPEC_ACTION_NONE
;
1684 /* downgrade next lower non-ACM AC */
1685 for (non_acm_ac
= ac
+ 1;
1686 non_acm_ac
< IEEE80211_NUM_ACS
;
1688 if (!(sdata
->wmm_acm
& BIT(7 - 2 * non_acm_ac
)))
1690 /* The loop will result in using BK even if it requires
1691 * admission control, such configuration makes no sense
1692 * and we have to transmit somehow - the AC selection
1693 * does the same thing.
1695 if (drv_conf_tx(local
, sdata
, ac
,
1696 &sdata
->tx_conf
[non_acm_ac
]))
1698 "failed to set TX queue parameters for queue %d\n",
1700 tx_tspec
->action
= TX_TSPEC_ACTION_NONE
;
1702 schedule_delayed_work(&ifmgd
->tx_tspec_wk
,
1703 tx_tspec
->time_slice_start
+ HZ
- now
+ 1);
1705 case TX_TSPEC_ACTION_NONE
:
1714 void ieee80211_sta_handle_tspec_ac_params(struct ieee80211_sub_if_data
*sdata
)
1716 if (__ieee80211_sta_handle_tspec_ac_params(sdata
))
1717 ieee80211_bss_info_change_notify(sdata
, BSS_CHANGED_QOS
);
1720 static void ieee80211_sta_handle_tspec_ac_params_wk(struct work_struct
*work
)
1722 struct ieee80211_sub_if_data
*sdata
;
1724 sdata
= container_of(work
, struct ieee80211_sub_if_data
,
1725 u
.mgd
.tx_tspec_wk
.work
);
1726 ieee80211_sta_handle_tspec_ac_params(sdata
);
1730 static bool ieee80211_sta_wmm_params(struct ieee80211_local
*local
,
1731 struct ieee80211_sub_if_data
*sdata
,
1732 const u8
*wmm_param
, size_t wmm_param_len
)
1734 struct ieee80211_tx_queue_params params
;
1735 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1739 u8 uapsd_queues
= 0;
1741 if (!local
->ops
->conf_tx
)
1744 if (local
->hw
.queues
< IEEE80211_NUM_ACS
)
1750 if (wmm_param_len
< 8 || wmm_param
[5] /* version */ != 1)
1753 if (ifmgd
->flags
& IEEE80211_STA_UAPSD_ENABLED
)
1754 uapsd_queues
= ifmgd
->uapsd_queues
;
1756 count
= wmm_param
[6] & 0x0f;
1757 if (count
== ifmgd
->wmm_last_param_set
)
1759 ifmgd
->wmm_last_param_set
= count
;
1761 pos
= wmm_param
+ 8;
1762 left
= wmm_param_len
- 8;
1764 memset(¶ms
, 0, sizeof(params
));
1767 for (; left
>= 4; left
-= 4, pos
+= 4) {
1768 int aci
= (pos
[0] >> 5) & 0x03;
1769 int acm
= (pos
[0] >> 4) & 0x01;
1777 sdata
->wmm_acm
|= BIT(1) | BIT(2); /* BK/- */
1778 if (uapsd_queues
& IEEE80211_WMM_IE_STA_QOSINFO_AC_BK
)
1784 sdata
->wmm_acm
|= BIT(4) | BIT(5); /* CL/VI */
1785 if (uapsd_queues
& IEEE80211_WMM_IE_STA_QOSINFO_AC_VI
)
1791 sdata
->wmm_acm
|= BIT(6) | BIT(7); /* VO/NC */
1792 if (uapsd_queues
& IEEE80211_WMM_IE_STA_QOSINFO_AC_VO
)
1799 sdata
->wmm_acm
|= BIT(0) | BIT(3); /* BE/EE */
1800 if (uapsd_queues
& IEEE80211_WMM_IE_STA_QOSINFO_AC_BE
)
1805 params
.aifs
= pos
[0] & 0x0f;
1806 params
.cw_max
= ecw2cw((pos
[1] & 0xf0) >> 4);
1807 params
.cw_min
= ecw2cw(pos
[1] & 0x0f);
1808 params
.txop
= get_unaligned_le16(pos
+ 2);
1810 params
.uapsd
= uapsd
;
1813 "WMM queue=%d aci=%d acm=%d aifs=%d cWmin=%d cWmax=%d txop=%d uapsd=%d, downgraded=%d\n",
1815 params
.aifs
, params
.cw_min
, params
.cw_max
,
1816 params
.txop
, params
.uapsd
,
1817 ifmgd
->tx_tspec
[queue
].downgraded
);
1818 sdata
->tx_conf
[queue
] = params
;
1819 if (!ifmgd
->tx_tspec
[queue
].downgraded
&&
1820 drv_conf_tx(local
, sdata
, queue
, ¶ms
))
1822 "failed to set TX queue parameters for queue %d\n",
1826 /* enable WMM or activate new settings */
1827 sdata
->vif
.bss_conf
.qos
= true;
1831 static void __ieee80211_stop_poll(struct ieee80211_sub_if_data
*sdata
)
1833 lockdep_assert_held(&sdata
->local
->mtx
);
1835 sdata
->u
.mgd
.flags
&= ~IEEE80211_STA_CONNECTION_POLL
;
1836 ieee80211_run_deferred_scan(sdata
->local
);
1839 static void ieee80211_stop_poll(struct ieee80211_sub_if_data
*sdata
)
1841 mutex_lock(&sdata
->local
->mtx
);
1842 __ieee80211_stop_poll(sdata
);
1843 mutex_unlock(&sdata
->local
->mtx
);
1846 static u32
ieee80211_handle_bss_capability(struct ieee80211_sub_if_data
*sdata
,
1847 u16 capab
, bool erp_valid
, u8 erp
)
1849 struct ieee80211_bss_conf
*bss_conf
= &sdata
->vif
.bss_conf
;
1851 bool use_protection
;
1852 bool use_short_preamble
;
1853 bool use_short_slot
;
1856 use_protection
= (erp
& WLAN_ERP_USE_PROTECTION
) != 0;
1857 use_short_preamble
= (erp
& WLAN_ERP_BARKER_PREAMBLE
) == 0;
1859 use_protection
= false;
1860 use_short_preamble
= !!(capab
& WLAN_CAPABILITY_SHORT_PREAMBLE
);
1863 use_short_slot
= !!(capab
& WLAN_CAPABILITY_SHORT_SLOT_TIME
);
1864 if (ieee80211_get_sdata_band(sdata
) == IEEE80211_BAND_5GHZ
)
1865 use_short_slot
= true;
1867 if (use_protection
!= bss_conf
->use_cts_prot
) {
1868 bss_conf
->use_cts_prot
= use_protection
;
1869 changed
|= BSS_CHANGED_ERP_CTS_PROT
;
1872 if (use_short_preamble
!= bss_conf
->use_short_preamble
) {
1873 bss_conf
->use_short_preamble
= use_short_preamble
;
1874 changed
|= BSS_CHANGED_ERP_PREAMBLE
;
1877 if (use_short_slot
!= bss_conf
->use_short_slot
) {
1878 bss_conf
->use_short_slot
= use_short_slot
;
1879 changed
|= BSS_CHANGED_ERP_SLOT
;
1885 static void ieee80211_set_associated(struct ieee80211_sub_if_data
*sdata
,
1886 struct cfg80211_bss
*cbss
,
1887 u32 bss_info_changed
)
1889 struct ieee80211_bss
*bss
= (void *)cbss
->priv
;
1890 struct ieee80211_local
*local
= sdata
->local
;
1891 struct ieee80211_bss_conf
*bss_conf
= &sdata
->vif
.bss_conf
;
1893 bss_info_changed
|= BSS_CHANGED_ASSOC
;
1894 bss_info_changed
|= ieee80211_handle_bss_capability(sdata
,
1895 bss_conf
->assoc_capability
, bss
->has_erp_value
, bss
->erp_value
);
1897 sdata
->u
.mgd
.beacon_timeout
= usecs_to_jiffies(ieee80211_tu_to_usec(
1898 beacon_loss_count
* bss_conf
->beacon_int
));
1900 sdata
->u
.mgd
.associated
= cbss
;
1901 memcpy(sdata
->u
.mgd
.bssid
, cbss
->bssid
, ETH_ALEN
);
1903 sdata
->u
.mgd
.flags
|= IEEE80211_STA_RESET_SIGNAL_AVE
;
1905 if (sdata
->vif
.p2p
) {
1906 const struct cfg80211_bss_ies
*ies
;
1909 ies
= rcu_dereference(cbss
->ies
);
1913 ret
= cfg80211_get_p2p_attr(
1914 ies
->data
, ies
->len
,
1915 IEEE80211_P2P_ATTR_ABSENCE_NOTICE
,
1916 (u8
*) &bss_conf
->p2p_noa_attr
,
1917 sizeof(bss_conf
->p2p_noa_attr
));
1919 sdata
->u
.mgd
.p2p_noa_index
=
1920 bss_conf
->p2p_noa_attr
.index
;
1921 bss_info_changed
|= BSS_CHANGED_P2P_PS
;
1927 /* just to be sure */
1928 ieee80211_stop_poll(sdata
);
1930 ieee80211_led_assoc(local
, 1);
1932 if (sdata
->u
.mgd
.have_beacon
) {
1934 * If the AP is buggy we may get here with no DTIM period
1935 * known, so assume it's 1 which is the only safe assumption
1936 * in that case, although if the TIM IE is broken powersave
1937 * probably just won't work at all.
1939 bss_conf
->dtim_period
= sdata
->u
.mgd
.dtim_period
?: 1;
1940 bss_conf
->beacon_rate
= bss
->beacon_rate
;
1941 bss_info_changed
|= BSS_CHANGED_BEACON_INFO
;
1943 bss_conf
->beacon_rate
= NULL
;
1944 bss_conf
->dtim_period
= 0;
1947 bss_conf
->assoc
= 1;
1949 /* Tell the driver to monitor connection quality (if supported) */
1950 if (sdata
->vif
.driver_flags
& IEEE80211_VIF_SUPPORTS_CQM_RSSI
&&
1951 bss_conf
->cqm_rssi_thold
)
1952 bss_info_changed
|= BSS_CHANGED_CQM
;
1954 /* Enable ARP filtering */
1955 if (bss_conf
->arp_addr_cnt
)
1956 bss_info_changed
|= BSS_CHANGED_ARP_FILTER
;
1958 ieee80211_bss_info_change_notify(sdata
, bss_info_changed
);
1960 mutex_lock(&local
->iflist_mtx
);
1961 ieee80211_recalc_ps(local
, -1);
1962 mutex_unlock(&local
->iflist_mtx
);
1964 ieee80211_recalc_smps(sdata
);
1965 ieee80211_recalc_ps_vif(sdata
);
1967 netif_carrier_on(sdata
->dev
);
1970 static void ieee80211_set_disassoc(struct ieee80211_sub_if_data
*sdata
,
1971 u16 stype
, u16 reason
, bool tx
,
1974 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
1975 struct ieee80211_local
*local
= sdata
->local
;
1978 sdata_assert_lock(sdata
);
1980 if (WARN_ON_ONCE(tx
&& !frame_buf
))
1983 if (WARN_ON(!ifmgd
->associated
))
1986 ieee80211_stop_poll(sdata
);
1988 ifmgd
->associated
= NULL
;
1989 netif_carrier_off(sdata
->dev
);
1992 * if we want to get out of ps before disassoc (why?) we have
1993 * to do it before sending disassoc, as otherwise the null-packet
1996 if (local
->hw
.conf
.flags
& IEEE80211_CONF_PS
) {
1997 local
->hw
.conf
.flags
&= ~IEEE80211_CONF_PS
;
1998 ieee80211_hw_config(local
, IEEE80211_CONF_CHANGE_PS
);
2000 local
->ps_sdata
= NULL
;
2002 /* disable per-vif ps */
2003 ieee80211_recalc_ps_vif(sdata
);
2005 /* flush out any pending frame (e.g. DELBA) before deauth/disassoc */
2007 ieee80211_flush_queues(local
, sdata
);
2009 /* deauthenticate/disassociate now */
2010 if (tx
|| frame_buf
)
2011 ieee80211_send_deauth_disassoc(sdata
, ifmgd
->bssid
, stype
,
2012 reason
, tx
, frame_buf
);
2014 /* flush out frame */
2016 ieee80211_flush_queues(local
, sdata
);
2018 /* clear bssid only after building the needed mgmt frames */
2019 memset(ifmgd
->bssid
, 0, ETH_ALEN
);
2021 /* remove AP and TDLS peers */
2022 sta_info_flush(sdata
);
2024 /* finally reset all BSS / config parameters */
2025 changed
|= ieee80211_reset_erp_info(sdata
);
2027 ieee80211_led_assoc(local
, 0);
2028 changed
|= BSS_CHANGED_ASSOC
;
2029 sdata
->vif
.bss_conf
.assoc
= false;
2031 ifmgd
->p2p_noa_index
= -1;
2032 memset(&sdata
->vif
.bss_conf
.p2p_noa_attr
, 0,
2033 sizeof(sdata
->vif
.bss_conf
.p2p_noa_attr
));
2035 /* on the next assoc, re-program HT/VHT parameters */
2036 memset(&ifmgd
->ht_capa
, 0, sizeof(ifmgd
->ht_capa
));
2037 memset(&ifmgd
->ht_capa_mask
, 0, sizeof(ifmgd
->ht_capa_mask
));
2038 memset(&ifmgd
->vht_capa
, 0, sizeof(ifmgd
->vht_capa
));
2039 memset(&ifmgd
->vht_capa_mask
, 0, sizeof(ifmgd
->vht_capa_mask
));
2041 sdata
->ap_power_level
= IEEE80211_UNSET_POWER_LEVEL
;
2043 del_timer_sync(&local
->dynamic_ps_timer
);
2044 cancel_work_sync(&local
->dynamic_ps_enable_work
);
2046 /* Disable ARP filtering */
2047 if (sdata
->vif
.bss_conf
.arp_addr_cnt
)
2048 changed
|= BSS_CHANGED_ARP_FILTER
;
2050 sdata
->vif
.bss_conf
.qos
= false;
2051 changed
|= BSS_CHANGED_QOS
;
2053 /* The BSSID (not really interesting) and HT changed */
2054 changed
|= BSS_CHANGED_BSSID
| BSS_CHANGED_HT
;
2055 ieee80211_bss_info_change_notify(sdata
, changed
);
2057 /* disassociated - set to defaults now */
2058 ieee80211_set_wmm_default(sdata
, false);
2060 del_timer_sync(&sdata
->u
.mgd
.conn_mon_timer
);
2061 del_timer_sync(&sdata
->u
.mgd
.bcn_mon_timer
);
2062 del_timer_sync(&sdata
->u
.mgd
.timer
);
2063 del_timer_sync(&sdata
->u
.mgd
.chswitch_timer
);
2065 sdata
->vif
.bss_conf
.dtim_period
= 0;
2066 sdata
->vif
.bss_conf
.beacon_rate
= NULL
;
2068 ifmgd
->have_beacon
= false;
2071 mutex_lock(&local
->mtx
);
2072 ieee80211_vif_release_channel(sdata
);
2074 sdata
->vif
.csa_active
= false;
2075 ifmgd
->csa_waiting_bcn
= false;
2076 if (sdata
->csa_block_tx
) {
2077 ieee80211_wake_vif_queues(local
, sdata
,
2078 IEEE80211_QUEUE_STOP_REASON_CSA
);
2079 sdata
->csa_block_tx
= false;
2081 mutex_unlock(&local
->mtx
);
2083 /* existing TX TSPEC sessions no longer exist */
2084 memset(ifmgd
->tx_tspec
, 0, sizeof(ifmgd
->tx_tspec
));
2085 cancel_delayed_work_sync(&ifmgd
->tx_tspec_wk
);
2087 sdata
->encrypt_headroom
= IEEE80211_ENCRYPT_HEADROOM
;
2090 void ieee80211_sta_rx_notify(struct ieee80211_sub_if_data
*sdata
,
2091 struct ieee80211_hdr
*hdr
)
2094 * We can postpone the mgd.timer whenever receiving unicast frames
2095 * from AP because we know that the connection is working both ways
2096 * at that time. But multicast frames (and hence also beacons) must
2097 * be ignored here, because we need to trigger the timer during
2098 * data idle periods for sending the periodic probe request to the
2099 * AP we're connected to.
2101 if (is_multicast_ether_addr(hdr
->addr1
))
2104 ieee80211_sta_reset_conn_monitor(sdata
);
2107 static void ieee80211_reset_ap_probe(struct ieee80211_sub_if_data
*sdata
)
2109 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
2110 struct ieee80211_local
*local
= sdata
->local
;
2112 mutex_lock(&local
->mtx
);
2113 if (!(ifmgd
->flags
& IEEE80211_STA_CONNECTION_POLL
))
2116 __ieee80211_stop_poll(sdata
);
2118 mutex_lock(&local
->iflist_mtx
);
2119 ieee80211_recalc_ps(local
, -1);
2120 mutex_unlock(&local
->iflist_mtx
);
2122 if (sdata
->local
->hw
.flags
& IEEE80211_HW_CONNECTION_MONITOR
)
2126 * We've received a probe response, but are not sure whether
2127 * we have or will be receiving any beacons or data, so let's
2128 * schedule the timers again, just in case.
2130 ieee80211_sta_reset_beacon_monitor(sdata
);
2132 mod_timer(&ifmgd
->conn_mon_timer
,
2133 round_jiffies_up(jiffies
+
2134 IEEE80211_CONNECTION_IDLE_TIME
));
2136 mutex_unlock(&local
->mtx
);
2139 static void ieee80211_sta_tx_wmm_ac_notify(struct ieee80211_sub_if_data
*sdata
,
2140 struct ieee80211_hdr
*hdr
,
2143 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
2144 u16 tid
= *ieee80211_get_qos_ctl(hdr
) & IEEE80211_QOS_CTL_TID_MASK
;
2145 int ac
= ieee80211_ac_from_tid(tid
);
2146 struct ieee80211_sta_tx_tspec
*tx_tspec
= &ifmgd
->tx_tspec
[ac
];
2147 unsigned long now
= jiffies
;
2149 if (likely(!tx_tspec
->admitted_time
))
2152 if (time_after(now
, tx_tspec
->time_slice_start
+ HZ
)) {
2153 tx_tspec
->consumed_tx_time
= 0;
2154 tx_tspec
->time_slice_start
= now
;
2156 if (tx_tspec
->downgraded
) {
2157 tx_tspec
->action
= TX_TSPEC_ACTION_STOP_DOWNGRADE
;
2158 schedule_delayed_work(&ifmgd
->tx_tspec_wk
, 0);
2162 if (tx_tspec
->downgraded
)
2165 tx_tspec
->consumed_tx_time
+= tx_time
;
2167 if (tx_tspec
->consumed_tx_time
>= tx_tspec
->admitted_time
) {
2168 tx_tspec
->downgraded
= true;
2169 tx_tspec
->action
= TX_TSPEC_ACTION_DOWNGRADE
;
2170 schedule_delayed_work(&ifmgd
->tx_tspec_wk
, 0);
2174 void ieee80211_sta_tx_notify(struct ieee80211_sub_if_data
*sdata
,
2175 struct ieee80211_hdr
*hdr
, bool ack
, u16 tx_time
)
2177 ieee80211_sta_tx_wmm_ac_notify(sdata
, hdr
, tx_time
);
2179 if (!ieee80211_is_data(hdr
->frame_control
))
2182 if (ieee80211_is_nullfunc(hdr
->frame_control
) &&
2183 sdata
->u
.mgd
.probe_send_count
> 0) {
2185 ieee80211_sta_reset_conn_monitor(sdata
);
2187 sdata
->u
.mgd
.nullfunc_failed
= true;
2188 ieee80211_queue_work(&sdata
->local
->hw
, &sdata
->work
);
2193 ieee80211_sta_reset_conn_monitor(sdata
);
2196 static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data
*sdata
)
2198 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
2200 u8
*dst
= ifmgd
->associated
->bssid
;
2201 u8 unicast_limit
= max(1, max_probe_tries
- 3);
2204 * Try sending broadcast probe requests for the last three
2205 * probe requests after the first ones failed since some
2206 * buggy APs only support broadcast probe requests.
2208 if (ifmgd
->probe_send_count
>= unicast_limit
)
2212 * When the hardware reports an accurate Tx ACK status, it's
2213 * better to send a nullfunc frame instead of a probe request,
2214 * as it will kick us off the AP quickly if we aren't associated
2215 * anymore. The timeout will be reset if the frame is ACKed by
2218 ifmgd
->probe_send_count
++;
2220 if (sdata
->local
->hw
.flags
& IEEE80211_HW_REPORTS_TX_ACK_STATUS
) {
2221 ifmgd
->nullfunc_failed
= false;
2222 ieee80211_send_nullfunc(sdata
->local
, sdata
, 0);
2227 ssid
= ieee80211_bss_get_ie(ifmgd
->associated
, WLAN_EID_SSID
);
2228 if (WARN_ON_ONCE(ssid
== NULL
))
2233 ieee80211_send_probe_req(sdata
, sdata
->vif
.addr
, NULL
,
2234 ssid
+ 2, ssid_len
, NULL
,
2235 0, (u32
) -1, true, 0,
2236 ifmgd
->associated
->channel
, false);
2240 ifmgd
->probe_timeout
= jiffies
+ msecs_to_jiffies(probe_wait_ms
);
2241 run_again(sdata
, ifmgd
->probe_timeout
);
2244 static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data
*sdata
,
2247 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
2248 bool already
= false;
2250 if (!ieee80211_sdata_running(sdata
))
2255 if (!ifmgd
->associated
)
2258 mutex_lock(&sdata
->local
->mtx
);
2260 if (sdata
->local
->tmp_channel
|| sdata
->local
->scanning
) {
2261 mutex_unlock(&sdata
->local
->mtx
);
2266 mlme_dbg_ratelimited(sdata
,
2267 "detected beacon loss from AP (missed %d beacons) - probing\n",
2270 ieee80211_cqm_beacon_loss_notify(&sdata
->vif
, GFP_KERNEL
);
2274 * The driver/our work has already reported this event or the
2275 * connection monitoring has kicked in and we have already sent
2276 * a probe request. Or maybe the AP died and the driver keeps
2277 * reporting until we disassociate...
2279 * In either case we have to ignore the current call to this
2280 * function (except for setting the correct probe reason bit)
2281 * because otherwise we would reset the timer every time and
2282 * never check whether we received a probe response!
2284 if (ifmgd
->flags
& IEEE80211_STA_CONNECTION_POLL
)
2287 ifmgd
->flags
|= IEEE80211_STA_CONNECTION_POLL
;
2289 mutex_unlock(&sdata
->local
->mtx
);
2294 mutex_lock(&sdata
->local
->iflist_mtx
);
2295 ieee80211_recalc_ps(sdata
->local
, -1);
2296 mutex_unlock(&sdata
->local
->iflist_mtx
);
2298 ifmgd
->probe_send_count
= 0;
2299 ieee80211_mgd_probe_ap_send(sdata
);
2301 sdata_unlock(sdata
);
2304 struct sk_buff
*ieee80211_ap_probereq_get(struct ieee80211_hw
*hw
,
2305 struct ieee80211_vif
*vif
)
2307 struct ieee80211_sub_if_data
*sdata
= vif_to_sdata(vif
);
2308 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
2309 struct cfg80211_bss
*cbss
;
2310 struct sk_buff
*skb
;
2314 if (WARN_ON(sdata
->vif
.type
!= NL80211_IFTYPE_STATION
))
2317 sdata_assert_lock(sdata
);
2319 if (ifmgd
->associated
)
2320 cbss
= ifmgd
->associated
;
2321 else if (ifmgd
->auth_data
)
2322 cbss
= ifmgd
->auth_data
->bss
;
2323 else if (ifmgd
->assoc_data
)
2324 cbss
= ifmgd
->assoc_data
->bss
;
2329 ssid
= ieee80211_bss_get_ie(cbss
, WLAN_EID_SSID
);
2330 if (WARN_ON_ONCE(ssid
== NULL
))
2335 skb
= ieee80211_build_probe_req(sdata
, sdata
->vif
.addr
, cbss
->bssid
,
2336 (u32
) -1, cbss
->channel
,
2343 EXPORT_SYMBOL(ieee80211_ap_probereq_get
);
2345 static void __ieee80211_disconnect(struct ieee80211_sub_if_data
*sdata
)
2347 struct ieee80211_local
*local
= sdata
->local
;
2348 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
2349 u8 frame_buf
[IEEE80211_DEAUTH_FRAME_LEN
];
2352 if (!ifmgd
->associated
) {
2353 sdata_unlock(sdata
);
2357 ieee80211_set_disassoc(sdata
, IEEE80211_STYPE_DEAUTH
,
2358 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY
,
2360 mutex_lock(&local
->mtx
);
2361 sdata
->vif
.csa_active
= false;
2362 ifmgd
->csa_waiting_bcn
= false;
2363 if (sdata
->csa_block_tx
) {
2364 ieee80211_wake_vif_queues(local
, sdata
,
2365 IEEE80211_QUEUE_STOP_REASON_CSA
);
2366 sdata
->csa_block_tx
= false;
2368 mutex_unlock(&local
->mtx
);
2370 cfg80211_tx_mlme_mgmt(sdata
->dev
, frame_buf
,
2371 IEEE80211_DEAUTH_FRAME_LEN
);
2372 sdata_unlock(sdata
);
2375 static void ieee80211_beacon_connection_loss_work(struct work_struct
*work
)
2377 struct ieee80211_sub_if_data
*sdata
=
2378 container_of(work
, struct ieee80211_sub_if_data
,
2379 u
.mgd
.beacon_connection_loss_work
);
2380 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
2381 struct sta_info
*sta
;
2383 if (ifmgd
->associated
) {
2385 sta
= sta_info_get(sdata
, ifmgd
->bssid
);
2387 sta
->beacon_loss_count
++;
2391 if (ifmgd
->connection_loss
) {
2392 sdata_info(sdata
, "Connection to AP %pM lost\n",
2394 __ieee80211_disconnect(sdata
);
2396 ieee80211_mgd_probe_ap(sdata
, true);
2400 static void ieee80211_csa_connection_drop_work(struct work_struct
*work
)
2402 struct ieee80211_sub_if_data
*sdata
=
2403 container_of(work
, struct ieee80211_sub_if_data
,
2404 u
.mgd
.csa_connection_drop_work
);
2406 __ieee80211_disconnect(sdata
);
2409 void ieee80211_beacon_loss(struct ieee80211_vif
*vif
)
2411 struct ieee80211_sub_if_data
*sdata
= vif_to_sdata(vif
);
2412 struct ieee80211_hw
*hw
= &sdata
->local
->hw
;
2414 trace_api_beacon_loss(sdata
);
2416 sdata
->u
.mgd
.connection_loss
= false;
2417 ieee80211_queue_work(hw
, &sdata
->u
.mgd
.beacon_connection_loss_work
);
2419 EXPORT_SYMBOL(ieee80211_beacon_loss
);
2421 void ieee80211_connection_loss(struct ieee80211_vif
*vif
)
2423 struct ieee80211_sub_if_data
*sdata
= vif_to_sdata(vif
);
2424 struct ieee80211_hw
*hw
= &sdata
->local
->hw
;
2426 trace_api_connection_loss(sdata
);
2428 sdata
->u
.mgd
.connection_loss
= true;
2429 ieee80211_queue_work(hw
, &sdata
->u
.mgd
.beacon_connection_loss_work
);
2431 EXPORT_SYMBOL(ieee80211_connection_loss
);
2434 static void ieee80211_destroy_auth_data(struct ieee80211_sub_if_data
*sdata
,
2437 struct ieee80211_mgd_auth_data
*auth_data
= sdata
->u
.mgd
.auth_data
;
2439 sdata_assert_lock(sdata
);
2442 sta_info_destroy_addr(sdata
, auth_data
->bss
->bssid
);
2444 memset(sdata
->u
.mgd
.bssid
, 0, ETH_ALEN
);
2445 ieee80211_bss_info_change_notify(sdata
, BSS_CHANGED_BSSID
);
2446 sdata
->u
.mgd
.flags
= 0;
2447 mutex_lock(&sdata
->local
->mtx
);
2448 ieee80211_vif_release_channel(sdata
);
2449 mutex_unlock(&sdata
->local
->mtx
);
2452 cfg80211_put_bss(sdata
->local
->hw
.wiphy
, auth_data
->bss
);
2454 sdata
->u
.mgd
.auth_data
= NULL
;
2457 static void ieee80211_auth_challenge(struct ieee80211_sub_if_data
*sdata
,
2458 struct ieee80211_mgmt
*mgmt
, size_t len
)
2460 struct ieee80211_local
*local
= sdata
->local
;
2461 struct ieee80211_mgd_auth_data
*auth_data
= sdata
->u
.mgd
.auth_data
;
2463 struct ieee802_11_elems elems
;
2466 pos
= mgmt
->u
.auth
.variable
;
2467 ieee802_11_parse_elems(pos
, len
- (pos
- (u8
*) mgmt
), false, &elems
);
2468 if (!elems
.challenge
)
2470 auth_data
->expected_transaction
= 4;
2471 drv_mgd_prepare_tx(sdata
->local
, sdata
);
2472 if (local
->hw
.flags
& IEEE80211_HW_REPORTS_TX_ACK_STATUS
)
2473 tx_flags
= IEEE80211_TX_CTL_REQ_TX_STATUS
|
2474 IEEE80211_TX_INTFL_MLME_CONN_TX
;
2475 ieee80211_send_auth(sdata
, 3, auth_data
->algorithm
, 0,
2476 elems
.challenge
- 2, elems
.challenge_len
+ 2,
2477 auth_data
->bss
->bssid
, auth_data
->bss
->bssid
,
2478 auth_data
->key
, auth_data
->key_len
,
2479 auth_data
->key_idx
, tx_flags
);
2482 static void ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data
*sdata
,
2483 struct ieee80211_mgmt
*mgmt
, size_t len
)
2485 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
2487 u16 auth_alg
, auth_transaction
, status_code
;
2488 struct sta_info
*sta
;
2490 sdata_assert_lock(sdata
);
2495 if (!ifmgd
->auth_data
|| ifmgd
->auth_data
->done
)
2498 memcpy(bssid
, ifmgd
->auth_data
->bss
->bssid
, ETH_ALEN
);
2500 if (!ether_addr_equal(bssid
, mgmt
->bssid
))
2503 auth_alg
= le16_to_cpu(mgmt
->u
.auth
.auth_alg
);
2504 auth_transaction
= le16_to_cpu(mgmt
->u
.auth
.auth_transaction
);
2505 status_code
= le16_to_cpu(mgmt
->u
.auth
.status_code
);
2507 if (auth_alg
!= ifmgd
->auth_data
->algorithm
||
2508 auth_transaction
!= ifmgd
->auth_data
->expected_transaction
) {
2509 sdata_info(sdata
, "%pM unexpected authentication state: alg %d (expected %d) transact %d (expected %d)\n",
2510 mgmt
->sa
, auth_alg
, ifmgd
->auth_data
->algorithm
,
2512 ifmgd
->auth_data
->expected_transaction
);
2516 if (status_code
!= WLAN_STATUS_SUCCESS
) {
2517 sdata_info(sdata
, "%pM denied authentication (status %d)\n",
2518 mgmt
->sa
, status_code
);
2519 ieee80211_destroy_auth_data(sdata
, false);
2520 cfg80211_rx_mlme_mgmt(sdata
->dev
, (u8
*)mgmt
, len
);
2524 switch (ifmgd
->auth_data
->algorithm
) {
2525 case WLAN_AUTH_OPEN
:
2526 case WLAN_AUTH_LEAP
:
2530 case WLAN_AUTH_SHARED_KEY
:
2531 if (ifmgd
->auth_data
->expected_transaction
!= 4) {
2532 ieee80211_auth_challenge(sdata
, mgmt
, len
);
2533 /* need another frame */
2538 WARN_ONCE(1, "invalid auth alg %d",
2539 ifmgd
->auth_data
->algorithm
);
2543 sdata_info(sdata
, "authenticated\n");
2544 ifmgd
->auth_data
->done
= true;
2545 ifmgd
->auth_data
->timeout
= jiffies
+ IEEE80211_AUTH_WAIT_ASSOC
;
2546 ifmgd
->auth_data
->timeout_started
= true;
2547 run_again(sdata
, ifmgd
->auth_data
->timeout
);
2549 if (ifmgd
->auth_data
->algorithm
== WLAN_AUTH_SAE
&&
2550 ifmgd
->auth_data
->expected_transaction
!= 2) {
2552 * Report auth frame to user space for processing since another
2553 * round of Authentication frames is still needed.
2555 cfg80211_rx_mlme_mgmt(sdata
->dev
, (u8
*)mgmt
, len
);
2559 /* move station state to auth */
2560 mutex_lock(&sdata
->local
->sta_mtx
);
2561 sta
= sta_info_get(sdata
, bssid
);
2563 WARN_ONCE(1, "%s: STA %pM not found", sdata
->name
, bssid
);
2566 if (sta_info_move_state(sta
, IEEE80211_STA_AUTH
)) {
2567 sdata_info(sdata
, "failed moving %pM to auth\n", bssid
);
2570 mutex_unlock(&sdata
->local
->sta_mtx
);
2572 cfg80211_rx_mlme_mgmt(sdata
->dev
, (u8
*)mgmt
, len
);
2575 mutex_unlock(&sdata
->local
->sta_mtx
);
2576 /* ignore frame -- wait for timeout */
2579 #define case_WLAN(type) \
2580 case WLAN_REASON_##type: return #type
2582 static const char *ieee80211_get_reason_code_string(u16 reason_code
)
2584 switch (reason_code
) {
2585 case_WLAN(UNSPECIFIED
);
2586 case_WLAN(PREV_AUTH_NOT_VALID
);
2587 case_WLAN(DEAUTH_LEAVING
);
2588 case_WLAN(DISASSOC_DUE_TO_INACTIVITY
);
2589 case_WLAN(DISASSOC_AP_BUSY
);
2590 case_WLAN(CLASS2_FRAME_FROM_NONAUTH_STA
);
2591 case_WLAN(CLASS3_FRAME_FROM_NONASSOC_STA
);
2592 case_WLAN(DISASSOC_STA_HAS_LEFT
);
2593 case_WLAN(STA_REQ_ASSOC_WITHOUT_AUTH
);
2594 case_WLAN(DISASSOC_BAD_POWER
);
2595 case_WLAN(DISASSOC_BAD_SUPP_CHAN
);
2596 case_WLAN(INVALID_IE
);
2597 case_WLAN(MIC_FAILURE
);
2598 case_WLAN(4WAY_HANDSHAKE_TIMEOUT
);
2599 case_WLAN(GROUP_KEY_HANDSHAKE_TIMEOUT
);
2600 case_WLAN(IE_DIFFERENT
);
2601 case_WLAN(INVALID_GROUP_CIPHER
);
2602 case_WLAN(INVALID_PAIRWISE_CIPHER
);
2603 case_WLAN(INVALID_AKMP
);
2604 case_WLAN(UNSUPP_RSN_VERSION
);
2605 case_WLAN(INVALID_RSN_IE_CAP
);
2606 case_WLAN(IEEE8021X_FAILED
);
2607 case_WLAN(CIPHER_SUITE_REJECTED
);
2608 case_WLAN(DISASSOC_UNSPECIFIED_QOS
);
2609 case_WLAN(DISASSOC_QAP_NO_BANDWIDTH
);
2610 case_WLAN(DISASSOC_LOW_ACK
);
2611 case_WLAN(DISASSOC_QAP_EXCEED_TXOP
);
2612 case_WLAN(QSTA_LEAVE_QBSS
);
2613 case_WLAN(QSTA_NOT_USE
);
2614 case_WLAN(QSTA_REQUIRE_SETUP
);
2615 case_WLAN(QSTA_TIMEOUT
);
2616 case_WLAN(QSTA_CIPHER_NOT_SUPP
);
2617 case_WLAN(MESH_PEER_CANCELED
);
2618 case_WLAN(MESH_MAX_PEERS
);
2619 case_WLAN(MESH_CONFIG
);
2620 case_WLAN(MESH_CLOSE
);
2621 case_WLAN(MESH_MAX_RETRIES
);
2622 case_WLAN(MESH_CONFIRM_TIMEOUT
);
2623 case_WLAN(MESH_INVALID_GTK
);
2624 case_WLAN(MESH_INCONSISTENT_PARAM
);
2625 case_WLAN(MESH_INVALID_SECURITY
);
2626 case_WLAN(MESH_PATH_ERROR
);
2627 case_WLAN(MESH_PATH_NOFORWARD
);
2628 case_WLAN(MESH_PATH_DEST_UNREACHABLE
);
2629 case_WLAN(MAC_EXISTS_IN_MBSS
);
2630 case_WLAN(MESH_CHAN_REGULATORY
);
2631 case_WLAN(MESH_CHAN
);
2632 default: return "<unknown>";
2636 static void ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data
*sdata
,
2637 struct ieee80211_mgmt
*mgmt
, size_t len
)
2639 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
2640 const u8
*bssid
= NULL
;
2643 sdata_assert_lock(sdata
);
2648 if (!ifmgd
->associated
||
2649 !ether_addr_equal(mgmt
->bssid
, ifmgd
->associated
->bssid
))
2652 bssid
= ifmgd
->associated
->bssid
;
2654 reason_code
= le16_to_cpu(mgmt
->u
.deauth
.reason_code
);
2656 sdata_info(sdata
, "deauthenticated from %pM (Reason: %u=%s)\n",
2657 bssid
, reason_code
, ieee80211_get_reason_code_string(reason_code
));
2659 ieee80211_set_disassoc(sdata
, 0, 0, false, NULL
);
2661 cfg80211_rx_mlme_mgmt(sdata
->dev
, (u8
*)mgmt
, len
);
2665 static void ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data
*sdata
,
2666 struct ieee80211_mgmt
*mgmt
, size_t len
)
2668 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
2671 sdata_assert_lock(sdata
);
2676 if (!ifmgd
->associated
||
2677 !ether_addr_equal(mgmt
->bssid
, ifmgd
->associated
->bssid
))
2680 reason_code
= le16_to_cpu(mgmt
->u
.disassoc
.reason_code
);
2682 sdata_info(sdata
, "disassociated from %pM (Reason: %u)\n",
2683 mgmt
->sa
, reason_code
);
2685 ieee80211_set_disassoc(sdata
, 0, 0, false, NULL
);
2687 cfg80211_rx_mlme_mgmt(sdata
->dev
, (u8
*)mgmt
, len
);
2690 static void ieee80211_get_rates(struct ieee80211_supported_band
*sband
,
2691 u8
*supp_rates
, unsigned int supp_rates_len
,
2692 u32
*rates
, u32
*basic_rates
,
2693 bool *have_higher_than_11mbit
,
2694 int *min_rate
, int *min_rate_index
,
2695 int shift
, u32 rate_flags
)
2699 for (i
= 0; i
< supp_rates_len
; i
++) {
2700 int rate
= supp_rates
[i
] & 0x7f;
2701 bool is_basic
= !!(supp_rates
[i
] & 0x80);
2703 if ((rate
* 5 * (1 << shift
)) > 110)
2704 *have_higher_than_11mbit
= true;
2707 * BSS_MEMBERSHIP_SELECTOR_HT_PHY is defined in 802.11n-2009
2708 * 7.3.2.2 as a magic value instead of a rate. Hence, skip it.
2710 * Note: Even through the membership selector and the basic
2711 * rate flag share the same bit, they are not exactly
2714 if (!!(supp_rates
[i
] & 0x80) &&
2715 (supp_rates
[i
] & 0x7f) == BSS_MEMBERSHIP_SELECTOR_HT_PHY
)
2718 for (j
= 0; j
< sband
->n_bitrates
; j
++) {
2719 struct ieee80211_rate
*br
;
2722 br
= &sband
->bitrates
[j
];
2723 if ((rate_flags
& br
->flags
) != rate_flags
)
2726 brate
= DIV_ROUND_UP(br
->bitrate
, (1 << shift
) * 5);
2727 if (brate
== rate
) {
2730 *basic_rates
|= BIT(j
);
2731 if ((rate
* 5) < *min_rate
) {
2732 *min_rate
= rate
* 5;
2733 *min_rate_index
= j
;
2741 static void ieee80211_destroy_assoc_data(struct ieee80211_sub_if_data
*sdata
,
2744 struct ieee80211_mgd_assoc_data
*assoc_data
= sdata
->u
.mgd
.assoc_data
;
2746 sdata_assert_lock(sdata
);
2749 sta_info_destroy_addr(sdata
, assoc_data
->bss
->bssid
);
2751 memset(sdata
->u
.mgd
.bssid
, 0, ETH_ALEN
);
2752 ieee80211_bss_info_change_notify(sdata
, BSS_CHANGED_BSSID
);
2753 sdata
->u
.mgd
.flags
= 0;
2754 mutex_lock(&sdata
->local
->mtx
);
2755 ieee80211_vif_release_channel(sdata
);
2756 mutex_unlock(&sdata
->local
->mtx
);
2760 sdata
->u
.mgd
.assoc_data
= NULL
;
2763 static bool ieee80211_assoc_success(struct ieee80211_sub_if_data
*sdata
,
2764 struct cfg80211_bss
*cbss
,
2765 struct ieee80211_mgmt
*mgmt
, size_t len
)
2767 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
2768 struct ieee80211_local
*local
= sdata
->local
;
2769 struct ieee80211_supported_band
*sband
;
2770 struct sta_info
*sta
;
2772 u16 capab_info
, aid
;
2773 struct ieee802_11_elems elems
;
2774 struct ieee80211_bss_conf
*bss_conf
= &sdata
->vif
.bss_conf
;
2775 const struct cfg80211_bss_ies
*bss_ies
= NULL
;
2776 struct ieee80211_mgd_assoc_data
*assoc_data
= ifmgd
->assoc_data
;
2781 /* AssocResp and ReassocResp have identical structure */
2783 aid
= le16_to_cpu(mgmt
->u
.assoc_resp
.aid
);
2784 capab_info
= le16_to_cpu(mgmt
->u
.assoc_resp
.capab_info
);
2786 if ((aid
& (BIT(15) | BIT(14))) != (BIT(15) | BIT(14)))
2787 sdata_info(sdata
, "invalid AID value 0x%x; bits 15:14 not set\n",
2789 aid
&= ~(BIT(15) | BIT(14));
2791 ifmgd
->broken_ap
= false;
2793 if (aid
== 0 || aid
> IEEE80211_MAX_AID
) {
2794 sdata_info(sdata
, "invalid AID value %d (out of range), turn off PS\n",
2797 ifmgd
->broken_ap
= true;
2800 pos
= mgmt
->u
.assoc_resp
.variable
;
2801 ieee802_11_parse_elems(pos
, len
- (pos
- (u8
*) mgmt
), false, &elems
);
2803 if (!elems
.supp_rates
) {
2804 sdata_info(sdata
, "no SuppRates element in AssocResp\n");
2809 ifmgd
->tdls_chan_switch_prohibited
=
2810 elems
.ext_capab
&& elems
.ext_capab_len
>= 5 &&
2811 (elems
.ext_capab
[4] & WLAN_EXT_CAPA5_TDLS_CH_SW_PROHIBITED
);
2814 * Some APs are erroneously not including some information in their
2815 * (re)association response frames. Try to recover by using the data
2816 * from the beacon or probe response. This seems to afflict mobile
2817 * 2G/3G/4G wifi routers, reported models include the "Onda PN51T",
2818 * "Vodafone PocketWiFi 2", "ZTE MF60" and a similar T-Mobile device.
2820 if ((assoc_data
->wmm
&& !elems
.wmm_param
) ||
2821 (!(ifmgd
->flags
& IEEE80211_STA_DISABLE_HT
) &&
2822 (!elems
.ht_cap_elem
|| !elems
.ht_operation
)) ||
2823 (!(ifmgd
->flags
& IEEE80211_STA_DISABLE_VHT
) &&
2824 (!elems
.vht_cap_elem
|| !elems
.vht_operation
))) {
2825 const struct cfg80211_bss_ies
*ies
;
2826 struct ieee802_11_elems bss_elems
;
2829 ies
= rcu_dereference(cbss
->ies
);
2831 bss_ies
= kmemdup(ies
, sizeof(*ies
) + ies
->len
,
2837 ieee802_11_parse_elems(bss_ies
->data
, bss_ies
->len
,
2839 if (assoc_data
->wmm
&&
2840 !elems
.wmm_param
&& bss_elems
.wmm_param
) {
2841 elems
.wmm_param
= bss_elems
.wmm_param
;
2843 "AP bug: WMM param missing from AssocResp\n");
2847 * Also check if we requested HT/VHT, otherwise the AP doesn't
2848 * have to include the IEs in the (re)association response.
2850 if (!elems
.ht_cap_elem
&& bss_elems
.ht_cap_elem
&&
2851 !(ifmgd
->flags
& IEEE80211_STA_DISABLE_HT
)) {
2852 elems
.ht_cap_elem
= bss_elems
.ht_cap_elem
;
2854 "AP bug: HT capability missing from AssocResp\n");
2856 if (!elems
.ht_operation
&& bss_elems
.ht_operation
&&
2857 !(ifmgd
->flags
& IEEE80211_STA_DISABLE_HT
)) {
2858 elems
.ht_operation
= bss_elems
.ht_operation
;
2860 "AP bug: HT operation missing from AssocResp\n");
2862 if (!elems
.vht_cap_elem
&& bss_elems
.vht_cap_elem
&&
2863 !(ifmgd
->flags
& IEEE80211_STA_DISABLE_VHT
)) {
2864 elems
.vht_cap_elem
= bss_elems
.vht_cap_elem
;
2866 "AP bug: VHT capa missing from AssocResp\n");
2868 if (!elems
.vht_operation
&& bss_elems
.vht_operation
&&
2869 !(ifmgd
->flags
& IEEE80211_STA_DISABLE_VHT
)) {
2870 elems
.vht_operation
= bss_elems
.vht_operation
;
2872 "AP bug: VHT operation missing from AssocResp\n");
2877 * We previously checked these in the beacon/probe response, so
2878 * they should be present here. This is just a safety net.
2880 if (!(ifmgd
->flags
& IEEE80211_STA_DISABLE_HT
) &&
2881 (!elems
.wmm_param
|| !elems
.ht_cap_elem
|| !elems
.ht_operation
)) {
2883 "HT AP is missing WMM params or HT capability/operation\n");
2888 if (!(ifmgd
->flags
& IEEE80211_STA_DISABLE_VHT
) &&
2889 (!elems
.vht_cap_elem
|| !elems
.vht_operation
)) {
2891 "VHT AP is missing VHT capability/operation\n");
2896 mutex_lock(&sdata
->local
->sta_mtx
);
2898 * station info was already allocated and inserted before
2899 * the association and should be available to us
2901 sta
= sta_info_get(sdata
, cbss
->bssid
);
2902 if (WARN_ON(!sta
)) {
2903 mutex_unlock(&sdata
->local
->sta_mtx
);
2908 sband
= local
->hw
.wiphy
->bands
[ieee80211_get_sdata_band(sdata
)];
2910 /* Set up internal HT/VHT capabilities */
2911 if (elems
.ht_cap_elem
&& !(ifmgd
->flags
& IEEE80211_STA_DISABLE_HT
))
2912 ieee80211_ht_cap_ie_to_sta_ht_cap(sdata
, sband
,
2913 elems
.ht_cap_elem
, sta
);
2915 if (elems
.vht_cap_elem
&& !(ifmgd
->flags
& IEEE80211_STA_DISABLE_VHT
))
2916 ieee80211_vht_cap_ie_to_sta_vht_cap(sdata
, sband
,
2917 elems
.vht_cap_elem
, sta
);
2920 * Some APs, e.g. Netgear WNDR3700, report invalid HT operation data
2921 * in their association response, so ignore that data for our own
2922 * configuration. If it changed since the last beacon, we'll get the
2923 * next beacon and update then.
2927 * If an operating mode notification IE is present, override the
2928 * NSS calculation (that would be done in rate_control_rate_init())
2929 * and use the # of streams from that element.
2931 if (elems
.opmode_notif
&&
2932 !(*elems
.opmode_notif
& IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF
)) {
2935 nss
= *elems
.opmode_notif
& IEEE80211_OPMODE_NOTIF_RX_NSS_MASK
;
2936 nss
>>= IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT
;
2938 sta
->sta
.rx_nss
= nss
;
2941 rate_control_rate_init(sta
);
2943 if (ifmgd
->flags
& IEEE80211_STA_MFP_ENABLED
)
2944 set_sta_flag(sta
, WLAN_STA_MFP
);
2946 sta
->sta
.wme
= elems
.wmm_param
;
2948 err
= sta_info_move_state(sta
, IEEE80211_STA_ASSOC
);
2949 if (!err
&& !(ifmgd
->flags
& IEEE80211_STA_CONTROL_PORT
))
2950 err
= sta_info_move_state(sta
, IEEE80211_STA_AUTHORIZED
);
2953 "failed to move station %pM to desired state\n",
2955 WARN_ON(__sta_info_destroy(sta
));
2956 mutex_unlock(&sdata
->local
->sta_mtx
);
2961 mutex_unlock(&sdata
->local
->sta_mtx
);
2964 * Always handle WMM once after association regardless
2965 * of the first value the AP uses. Setting -1 here has
2966 * that effect because the AP values is an unsigned
2969 ifmgd
->wmm_last_param_set
= -1;
2971 if (!(ifmgd
->flags
& IEEE80211_STA_DISABLE_WMM
) && elems
.wmm_param
)
2972 ieee80211_sta_wmm_params(local
, sdata
, elems
.wmm_param
,
2973 elems
.wmm_param_len
);
2975 ieee80211_set_wmm_default(sdata
, false);
2976 changed
|= BSS_CHANGED_QOS
;
2978 /* set AID and assoc capability,
2979 * ieee80211_set_associated() will tell the driver */
2980 bss_conf
->aid
= aid
;
2981 bss_conf
->assoc_capability
= capab_info
;
2982 ieee80211_set_associated(sdata
, cbss
, changed
);
2985 * If we're using 4-addr mode, let the AP know that we're
2986 * doing so, so that it can create the STA VLAN on its side
2988 if (ifmgd
->use_4addr
)
2989 ieee80211_send_4addr_nullfunc(local
, sdata
);
2992 * Start timer to probe the connection to the AP now.
2993 * Also start the timer that will detect beacon loss.
2995 ieee80211_sta_rx_notify(sdata
, (struct ieee80211_hdr
*)mgmt
);
2996 ieee80211_sta_reset_beacon_monitor(sdata
);
3004 static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data
*sdata
,
3005 struct ieee80211_mgmt
*mgmt
,
3008 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
3009 struct ieee80211_mgd_assoc_data
*assoc_data
= ifmgd
->assoc_data
;
3010 u16 capab_info
, status_code
, aid
;
3011 struct ieee802_11_elems elems
;
3012 int ac
, uapsd_queues
= -1;
3015 struct cfg80211_bss
*bss
;
3017 sdata_assert_lock(sdata
);
3021 if (!ether_addr_equal(assoc_data
->bss
->bssid
, mgmt
->bssid
))
3025 * AssocResp and ReassocResp have identical structure, so process both
3026 * of them in this function.
3032 reassoc
= ieee80211_is_reassoc_req(mgmt
->frame_control
);
3033 capab_info
= le16_to_cpu(mgmt
->u
.assoc_resp
.capab_info
);
3034 status_code
= le16_to_cpu(mgmt
->u
.assoc_resp
.status_code
);
3035 aid
= le16_to_cpu(mgmt
->u
.assoc_resp
.aid
);
3038 "RX %sssocResp from %pM (capab=0x%x status=%d aid=%d)\n",
3039 reassoc
? "Rea" : "A", mgmt
->sa
,
3040 capab_info
, status_code
, (u16
)(aid
& ~(BIT(15) | BIT(14))));
3042 pos
= mgmt
->u
.assoc_resp
.variable
;
3043 ieee802_11_parse_elems(pos
, len
- (pos
- (u8
*) mgmt
), false, &elems
);
3045 if (status_code
== WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY
&&
3046 elems
.timeout_int
&&
3047 elems
.timeout_int
->type
== WLAN_TIMEOUT_ASSOC_COMEBACK
) {
3049 tu
= le32_to_cpu(elems
.timeout_int
->value
);
3050 ms
= tu
* 1024 / 1000;
3052 "%pM rejected association temporarily; comeback duration %u TU (%u ms)\n",
3054 assoc_data
->timeout
= jiffies
+ msecs_to_jiffies(ms
);
3055 assoc_data
->timeout_started
= true;
3056 if (ms
> IEEE80211_ASSOC_TIMEOUT
)
3057 run_again(sdata
, assoc_data
->timeout
);
3061 bss
= assoc_data
->bss
;
3063 if (status_code
!= WLAN_STATUS_SUCCESS
) {
3064 sdata_info(sdata
, "%pM denied association (code=%d)\n",
3065 mgmt
->sa
, status_code
);
3066 ieee80211_destroy_assoc_data(sdata
, false);
3068 if (!ieee80211_assoc_success(sdata
, bss
, mgmt
, len
)) {
3069 /* oops -- internal error -- send timeout for now */
3070 ieee80211_destroy_assoc_data(sdata
, false);
3071 cfg80211_assoc_timeout(sdata
->dev
, bss
);
3074 sdata_info(sdata
, "associated\n");
3077 * destroy assoc_data afterwards, as otherwise an idle
3078 * recalc after assoc_data is NULL but before associated
3079 * is set can cause the interface to go idle
3081 ieee80211_destroy_assoc_data(sdata
, true);
3083 /* get uapsd queues configuration */
3085 for (ac
= 0; ac
< IEEE80211_NUM_ACS
; ac
++)
3086 if (sdata
->tx_conf
[ac
].uapsd
)
3087 uapsd_queues
|= BIT(ac
);
3090 cfg80211_rx_assoc_resp(sdata
->dev
, bss
, (u8
*)mgmt
, len
, uapsd_queues
);
3093 static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data
*sdata
,
3094 struct ieee80211_mgmt
*mgmt
, size_t len
,
3095 struct ieee80211_rx_status
*rx_status
,
3096 struct ieee802_11_elems
*elems
)
3098 struct ieee80211_local
*local
= sdata
->local
;
3099 struct ieee80211_bss
*bss
;
3100 struct ieee80211_channel
*channel
;
3102 sdata_assert_lock(sdata
);
3104 channel
= ieee80211_get_channel(local
->hw
.wiphy
, rx_status
->freq
);
3108 bss
= ieee80211_bss_info_update(local
, rx_status
, mgmt
, len
, elems
,
3111 sdata
->vif
.bss_conf
.beacon_rate
= bss
->beacon_rate
;
3112 ieee80211_rx_bss_put(local
, bss
);
3117 static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data
*sdata
,
3118 struct sk_buff
*skb
)
3120 struct ieee80211_mgmt
*mgmt
= (void *)skb
->data
;
3121 struct ieee80211_if_managed
*ifmgd
;
3122 struct ieee80211_rx_status
*rx_status
= (void *) skb
->cb
;
3123 size_t baselen
, len
= skb
->len
;
3124 struct ieee802_11_elems elems
;
3126 ifmgd
= &sdata
->u
.mgd
;
3128 sdata_assert_lock(sdata
);
3130 if (!ether_addr_equal(mgmt
->da
, sdata
->vif
.addr
))
3131 return; /* ignore ProbeResp to foreign address */
3133 baselen
= (u8
*) mgmt
->u
.probe_resp
.variable
- (u8
*) mgmt
;
3137 ieee802_11_parse_elems(mgmt
->u
.probe_resp
.variable
, len
- baselen
,
3140 ieee80211_rx_bss_info(sdata
, mgmt
, len
, rx_status
, &elems
);
3142 if (ifmgd
->associated
&&
3143 ether_addr_equal(mgmt
->bssid
, ifmgd
->associated
->bssid
))
3144 ieee80211_reset_ap_probe(sdata
);
3146 if (ifmgd
->auth_data
&& !ifmgd
->auth_data
->bss
->proberesp_ies
&&
3147 ether_addr_equal(mgmt
->bssid
, ifmgd
->auth_data
->bss
->bssid
)) {
3148 /* got probe response, continue with auth */
3149 sdata_info(sdata
, "direct probe responded\n");
3150 ifmgd
->auth_data
->tries
= 0;
3151 ifmgd
->auth_data
->timeout
= jiffies
;
3152 ifmgd
->auth_data
->timeout_started
= true;
3153 run_again(sdata
, ifmgd
->auth_data
->timeout
);
3158 * This is the canonical list of information elements we care about,
3159 * the filter code also gives us all changes to the Microsoft OUI
3160 * (00:50:F2) vendor IE which is used for WMM which we need to track,
3161 * as well as the DTPC IE (part of the Cisco OUI) used for signaling
3162 * changes to requested client power.
3164 * We implement beacon filtering in software since that means we can
3165 * avoid processing the frame here and in cfg80211, and userspace
3166 * will not be able to tell whether the hardware supports it or not.
3168 * XXX: This list needs to be dynamic -- userspace needs to be able to
3169 * add items it requires. It also needs to be able to tell us to
3170 * look out for other vendor IEs.
3172 static const u64 care_about_ies
=
3173 (1ULL << WLAN_EID_COUNTRY
) |
3174 (1ULL << WLAN_EID_ERP_INFO
) |
3175 (1ULL << WLAN_EID_CHANNEL_SWITCH
) |
3176 (1ULL << WLAN_EID_PWR_CONSTRAINT
) |
3177 (1ULL << WLAN_EID_HT_CAPABILITY
) |
3178 (1ULL << WLAN_EID_HT_OPERATION
);
3180 static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data
*sdata
,
3181 struct ieee80211_mgmt
*mgmt
, size_t len
,
3182 struct ieee80211_rx_status
*rx_status
)
3184 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
3185 struct ieee80211_bss_conf
*bss_conf
= &sdata
->vif
.bss_conf
;
3187 struct ieee802_11_elems elems
;
3188 struct ieee80211_local
*local
= sdata
->local
;
3189 struct ieee80211_chanctx_conf
*chanctx_conf
;
3190 struct ieee80211_channel
*chan
;
3191 struct sta_info
*sta
;
3197 u8 deauth_buf
[IEEE80211_DEAUTH_FRAME_LEN
];
3199 sdata_assert_lock(sdata
);
3201 /* Process beacon from the current BSS */
3202 baselen
= (u8
*) mgmt
->u
.beacon
.variable
- (u8
*) mgmt
;
3207 chanctx_conf
= rcu_dereference(sdata
->vif
.chanctx_conf
);
3208 if (!chanctx_conf
) {
3213 if (rx_status
->freq
!= chanctx_conf
->def
.chan
->center_freq
) {
3217 chan
= chanctx_conf
->def
.chan
;
3220 if (ifmgd
->assoc_data
&& ifmgd
->assoc_data
->need_beacon
&&
3221 ether_addr_equal(mgmt
->bssid
, ifmgd
->assoc_data
->bss
->bssid
)) {
3222 ieee802_11_parse_elems(mgmt
->u
.beacon
.variable
,
3223 len
- baselen
, false, &elems
);
3225 ieee80211_rx_bss_info(sdata
, mgmt
, len
, rx_status
, &elems
);
3226 if (elems
.tim
&& !elems
.parse_error
) {
3227 const struct ieee80211_tim_ie
*tim_ie
= elems
.tim
;
3228 ifmgd
->dtim_period
= tim_ie
->dtim_period
;
3230 ifmgd
->have_beacon
= true;
3231 ifmgd
->assoc_data
->need_beacon
= false;
3232 if (local
->hw
.flags
& IEEE80211_HW_TIMING_BEACON_ONLY
) {
3233 sdata
->vif
.bss_conf
.sync_tsf
=
3234 le64_to_cpu(mgmt
->u
.beacon
.timestamp
);
3235 sdata
->vif
.bss_conf
.sync_device_ts
=
3236 rx_status
->device_timestamp
;
3238 sdata
->vif
.bss_conf
.sync_dtim_count
=
3239 elems
.tim
->dtim_count
;
3241 sdata
->vif
.bss_conf
.sync_dtim_count
= 0;
3243 /* continue assoc process */
3244 ifmgd
->assoc_data
->timeout
= jiffies
;
3245 ifmgd
->assoc_data
->timeout_started
= true;
3246 run_again(sdata
, ifmgd
->assoc_data
->timeout
);
3250 if (!ifmgd
->associated
||
3251 !ether_addr_equal(mgmt
->bssid
, ifmgd
->associated
->bssid
))
3253 bssid
= ifmgd
->associated
->bssid
;
3255 /* Track average RSSI from the Beacon frames of the current AP */
3256 ifmgd
->last_beacon_signal
= rx_status
->signal
;
3257 if (ifmgd
->flags
& IEEE80211_STA_RESET_SIGNAL_AVE
) {
3258 ifmgd
->flags
&= ~IEEE80211_STA_RESET_SIGNAL_AVE
;
3259 ifmgd
->ave_beacon_signal
= rx_status
->signal
* 16;
3260 ifmgd
->last_cqm_event_signal
= 0;
3261 ifmgd
->count_beacon_signal
= 1;
3262 ifmgd
->last_ave_beacon_signal
= 0;
3264 ifmgd
->ave_beacon_signal
=
3265 (IEEE80211_SIGNAL_AVE_WEIGHT
* rx_status
->signal
* 16 +
3266 (16 - IEEE80211_SIGNAL_AVE_WEIGHT
) *
3267 ifmgd
->ave_beacon_signal
) / 16;
3268 ifmgd
->count_beacon_signal
++;
3271 if (ifmgd
->rssi_min_thold
!= ifmgd
->rssi_max_thold
&&
3272 ifmgd
->count_beacon_signal
>= IEEE80211_SIGNAL_AVE_MIN_COUNT
) {
3273 int sig
= ifmgd
->ave_beacon_signal
;
3274 int last_sig
= ifmgd
->last_ave_beacon_signal
;
3277 * if signal crosses either of the boundaries, invoke callback
3278 * with appropriate parameters
3280 if (sig
> ifmgd
->rssi_max_thold
&&
3281 (last_sig
<= ifmgd
->rssi_min_thold
|| last_sig
== 0)) {
3282 ifmgd
->last_ave_beacon_signal
= sig
;
3283 drv_rssi_callback(local
, sdata
, RSSI_EVENT_HIGH
);
3284 } else if (sig
< ifmgd
->rssi_min_thold
&&
3285 (last_sig
>= ifmgd
->rssi_max_thold
||
3287 ifmgd
->last_ave_beacon_signal
= sig
;
3288 drv_rssi_callback(local
, sdata
, RSSI_EVENT_LOW
);
3292 if (bss_conf
->cqm_rssi_thold
&&
3293 ifmgd
->count_beacon_signal
>= IEEE80211_SIGNAL_AVE_MIN_COUNT
&&
3294 !(sdata
->vif
.driver_flags
& IEEE80211_VIF_SUPPORTS_CQM_RSSI
)) {
3295 int sig
= ifmgd
->ave_beacon_signal
/ 16;
3296 int last_event
= ifmgd
->last_cqm_event_signal
;
3297 int thold
= bss_conf
->cqm_rssi_thold
;
3298 int hyst
= bss_conf
->cqm_rssi_hyst
;
3300 (last_event
== 0 || sig
< last_event
- hyst
)) {
3301 ifmgd
->last_cqm_event_signal
= sig
;
3302 ieee80211_cqm_rssi_notify(
3304 NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW
,
3306 } else if (sig
> thold
&&
3307 (last_event
== 0 || sig
> last_event
+ hyst
)) {
3308 ifmgd
->last_cqm_event_signal
= sig
;
3309 ieee80211_cqm_rssi_notify(
3311 NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH
,
3316 if (ifmgd
->flags
& IEEE80211_STA_CONNECTION_POLL
) {
3317 mlme_dbg_ratelimited(sdata
,
3318 "cancelling AP probe due to a received beacon\n");
3319 ieee80211_reset_ap_probe(sdata
);
3323 * Push the beacon loss detection into the future since
3324 * we are processing a beacon from the AP just now.
3326 ieee80211_sta_reset_beacon_monitor(sdata
);
3328 ncrc
= crc32_be(0, (void *)&mgmt
->u
.beacon
.beacon_int
, 4);
3329 ncrc
= ieee802_11_parse_elems_crc(mgmt
->u
.beacon
.variable
,
3330 len
- baselen
, false, &elems
,
3331 care_about_ies
, ncrc
);
3333 if (local
->hw
.flags
& IEEE80211_HW_PS_NULLFUNC_STACK
) {
3334 bool directed_tim
= ieee80211_check_tim(elems
.tim
,
3338 if (local
->hw
.conf
.dynamic_ps_timeout
> 0) {
3339 if (local
->hw
.conf
.flags
& IEEE80211_CONF_PS
) {
3340 local
->hw
.conf
.flags
&= ~IEEE80211_CONF_PS
;
3341 ieee80211_hw_config(local
,
3342 IEEE80211_CONF_CHANGE_PS
);
3344 ieee80211_send_nullfunc(local
, sdata
, 0);
3345 } else if (!local
->pspolling
&& sdata
->u
.mgd
.powersave
) {
3346 local
->pspolling
= true;
3349 * Here is assumed that the driver will be
3350 * able to send ps-poll frame and receive a
3351 * response even though power save mode is
3352 * enabled, but some drivers might require
3353 * to disable power save here. This needs
3354 * to be investigated.
3356 ieee80211_send_pspoll(local
, sdata
);
3361 if (sdata
->vif
.p2p
) {
3362 struct ieee80211_p2p_noa_attr noa
= {};
3365 ret
= cfg80211_get_p2p_attr(mgmt
->u
.beacon
.variable
,
3367 IEEE80211_P2P_ATTR_ABSENCE_NOTICE
,
3368 (u8
*) &noa
, sizeof(noa
));
3370 if (sdata
->u
.mgd
.p2p_noa_index
!= noa
.index
) {
3371 /* valid noa_attr and index changed */
3372 sdata
->u
.mgd
.p2p_noa_index
= noa
.index
;
3373 memcpy(&bss_conf
->p2p_noa_attr
, &noa
, sizeof(noa
));
3374 changed
|= BSS_CHANGED_P2P_PS
;
3376 * make sure we update all information, the CRC
3377 * mechanism doesn't look at P2P attributes.
3379 ifmgd
->beacon_crc_valid
= false;
3381 } else if (sdata
->u
.mgd
.p2p_noa_index
!= -1) {
3382 /* noa_attr not found and we had valid noa_attr before */
3383 sdata
->u
.mgd
.p2p_noa_index
= -1;
3384 memset(&bss_conf
->p2p_noa_attr
, 0, sizeof(bss_conf
->p2p_noa_attr
));
3385 changed
|= BSS_CHANGED_P2P_PS
;
3386 ifmgd
->beacon_crc_valid
= false;
3390 if (ifmgd
->csa_waiting_bcn
)
3391 ieee80211_chswitch_post_beacon(sdata
);
3393 if (ncrc
== ifmgd
->beacon_crc
&& ifmgd
->beacon_crc_valid
)
3395 ifmgd
->beacon_crc
= ncrc
;
3396 ifmgd
->beacon_crc_valid
= true;
3398 ieee80211_rx_bss_info(sdata
, mgmt
, len
, rx_status
, &elems
);
3400 ieee80211_sta_process_chanswitch(sdata
, rx_status
->mactime
,
3401 rx_status
->device_timestamp
,
3404 if (!(ifmgd
->flags
& IEEE80211_STA_DISABLE_WMM
) &&
3405 ieee80211_sta_wmm_params(local
, sdata
, elems
.wmm_param
,
3406 elems
.wmm_param_len
))
3407 changed
|= BSS_CHANGED_QOS
;
3410 * If we haven't had a beacon before, tell the driver about the
3411 * DTIM period (and beacon timing if desired) now.
3413 if (!ifmgd
->have_beacon
) {
3414 /* a few bogus AP send dtim_period = 0 or no TIM IE */
3416 bss_conf
->dtim_period
= elems
.tim
->dtim_period
?: 1;
3418 bss_conf
->dtim_period
= 1;
3420 if (local
->hw
.flags
& IEEE80211_HW_TIMING_BEACON_ONLY
) {
3421 sdata
->vif
.bss_conf
.sync_tsf
=
3422 le64_to_cpu(mgmt
->u
.beacon
.timestamp
);
3423 sdata
->vif
.bss_conf
.sync_device_ts
=
3424 rx_status
->device_timestamp
;
3426 sdata
->vif
.bss_conf
.sync_dtim_count
=
3427 elems
.tim
->dtim_count
;
3429 sdata
->vif
.bss_conf
.sync_dtim_count
= 0;
3432 changed
|= BSS_CHANGED_BEACON_INFO
;
3433 ifmgd
->have_beacon
= true;
3435 mutex_lock(&local
->iflist_mtx
);
3436 ieee80211_recalc_ps(local
, -1);
3437 mutex_unlock(&local
->iflist_mtx
);
3439 ieee80211_recalc_ps_vif(sdata
);
3442 if (elems
.erp_info
) {
3444 erp_value
= elems
.erp_info
[0];
3448 changed
|= ieee80211_handle_bss_capability(sdata
,
3449 le16_to_cpu(mgmt
->u
.beacon
.capab_info
),
3450 erp_valid
, erp_value
);
3452 mutex_lock(&local
->sta_mtx
);
3453 sta
= sta_info_get(sdata
, bssid
);
3455 if (ieee80211_config_bw(sdata
, sta
,
3456 elems
.ht_cap_elem
, elems
.ht_operation
,
3457 elems
.vht_operation
, bssid
, &changed
)) {
3458 mutex_unlock(&local
->sta_mtx
);
3459 ieee80211_set_disassoc(sdata
, IEEE80211_STYPE_DEAUTH
,
3460 WLAN_REASON_DEAUTH_LEAVING
,
3462 cfg80211_tx_mlme_mgmt(sdata
->dev
, deauth_buf
,
3463 sizeof(deauth_buf
));
3467 if (sta
&& elems
.opmode_notif
)
3468 ieee80211_vht_handle_opmode(sdata
, sta
, *elems
.opmode_notif
,
3469 rx_status
->band
, true);
3470 mutex_unlock(&local
->sta_mtx
);
3472 changed
|= ieee80211_handle_pwr_constr(sdata
, chan
, mgmt
,
3474 elems
.country_elem_len
,
3475 elems
.pwr_constr_elem
,
3476 elems
.cisco_dtpc_elem
);
3478 ieee80211_bss_info_change_notify(sdata
, changed
);
3481 void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data
*sdata
,
3482 struct sk_buff
*skb
)
3484 struct ieee80211_rx_status
*rx_status
;
3485 struct ieee80211_mgmt
*mgmt
;
3487 struct ieee802_11_elems elems
;
3490 rx_status
= (struct ieee80211_rx_status
*) skb
->cb
;
3491 mgmt
= (struct ieee80211_mgmt
*) skb
->data
;
3492 fc
= le16_to_cpu(mgmt
->frame_control
);
3496 switch (fc
& IEEE80211_FCTL_STYPE
) {
3497 case IEEE80211_STYPE_BEACON
:
3498 ieee80211_rx_mgmt_beacon(sdata
, mgmt
, skb
->len
, rx_status
);
3500 case IEEE80211_STYPE_PROBE_RESP
:
3501 ieee80211_rx_mgmt_probe_resp(sdata
, skb
);
3503 case IEEE80211_STYPE_AUTH
:
3504 ieee80211_rx_mgmt_auth(sdata
, mgmt
, skb
->len
);
3506 case IEEE80211_STYPE_DEAUTH
:
3507 ieee80211_rx_mgmt_deauth(sdata
, mgmt
, skb
->len
);
3509 case IEEE80211_STYPE_DISASSOC
:
3510 ieee80211_rx_mgmt_disassoc(sdata
, mgmt
, skb
->len
);
3512 case IEEE80211_STYPE_ASSOC_RESP
:
3513 case IEEE80211_STYPE_REASSOC_RESP
:
3514 ieee80211_rx_mgmt_assoc_resp(sdata
, mgmt
, skb
->len
);
3516 case IEEE80211_STYPE_ACTION
:
3517 if (mgmt
->u
.action
.category
== WLAN_CATEGORY_SPECTRUM_MGMT
) {
3518 ies_len
= skb
->len
-
3519 offsetof(struct ieee80211_mgmt
,
3520 u
.action
.u
.chan_switch
.variable
);
3525 ieee802_11_parse_elems(
3526 mgmt
->u
.action
.u
.chan_switch
.variable
,
3527 ies_len
, true, &elems
);
3529 if (elems
.parse_error
)
3532 ieee80211_sta_process_chanswitch(sdata
,
3534 rx_status
->device_timestamp
,
3536 } else if (mgmt
->u
.action
.category
== WLAN_CATEGORY_PUBLIC
) {
3537 ies_len
= skb
->len
-
3538 offsetof(struct ieee80211_mgmt
,
3539 u
.action
.u
.ext_chan_switch
.variable
);
3544 ieee802_11_parse_elems(
3545 mgmt
->u
.action
.u
.ext_chan_switch
.variable
,
3546 ies_len
, true, &elems
);
3548 if (elems
.parse_error
)
3551 /* for the handling code pretend this was also an IE */
3552 elems
.ext_chansw_ie
=
3553 &mgmt
->u
.action
.u
.ext_chan_switch
.data
;
3555 ieee80211_sta_process_chanswitch(sdata
,
3557 rx_status
->device_timestamp
,
3562 sdata_unlock(sdata
);
3565 static void ieee80211_sta_timer(unsigned long data
)
3567 struct ieee80211_sub_if_data
*sdata
=
3568 (struct ieee80211_sub_if_data
*) data
;
3570 ieee80211_queue_work(&sdata
->local
->hw
, &sdata
->work
);
3573 static void ieee80211_sta_connection_lost(struct ieee80211_sub_if_data
*sdata
,
3574 u8
*bssid
, u8 reason
, bool tx
)
3576 u8 frame_buf
[IEEE80211_DEAUTH_FRAME_LEN
];
3578 ieee80211_set_disassoc(sdata
, IEEE80211_STYPE_DEAUTH
, reason
,
3581 cfg80211_tx_mlme_mgmt(sdata
->dev
, frame_buf
,
3582 IEEE80211_DEAUTH_FRAME_LEN
);
3585 static int ieee80211_probe_auth(struct ieee80211_sub_if_data
*sdata
)
3587 struct ieee80211_local
*local
= sdata
->local
;
3588 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
3589 struct ieee80211_mgd_auth_data
*auth_data
= ifmgd
->auth_data
;
3592 sdata_assert_lock(sdata
);
3594 if (WARN_ON_ONCE(!auth_data
))
3599 if (auth_data
->tries
> IEEE80211_AUTH_MAX_TRIES
) {
3600 sdata_info(sdata
, "authentication with %pM timed out\n",
3601 auth_data
->bss
->bssid
);
3604 * Most likely AP is not in the range so remove the
3605 * bss struct for that AP.
3607 cfg80211_unlink_bss(local
->hw
.wiphy
, auth_data
->bss
);
3612 drv_mgd_prepare_tx(local
, sdata
);
3614 if (auth_data
->bss
->proberesp_ies
) {
3618 sdata_info(sdata
, "send auth to %pM (try %d/%d)\n",
3619 auth_data
->bss
->bssid
, auth_data
->tries
,
3620 IEEE80211_AUTH_MAX_TRIES
);
3622 auth_data
->expected_transaction
= 2;
3624 if (auth_data
->algorithm
== WLAN_AUTH_SAE
) {
3625 trans
= auth_data
->sae_trans
;
3626 status
= auth_data
->sae_status
;
3627 auth_data
->expected_transaction
= trans
;
3630 if (local
->hw
.flags
& IEEE80211_HW_REPORTS_TX_ACK_STATUS
)
3631 tx_flags
= IEEE80211_TX_CTL_REQ_TX_STATUS
|
3632 IEEE80211_TX_INTFL_MLME_CONN_TX
;
3634 ieee80211_send_auth(sdata
, trans
, auth_data
->algorithm
, status
,
3635 auth_data
->data
, auth_data
->data_len
,
3636 auth_data
->bss
->bssid
,
3637 auth_data
->bss
->bssid
, NULL
, 0, 0,
3642 sdata_info(sdata
, "direct probe to %pM (try %d/%i)\n",
3643 auth_data
->bss
->bssid
, auth_data
->tries
,
3644 IEEE80211_AUTH_MAX_TRIES
);
3647 ssidie
= ieee80211_bss_get_ie(auth_data
->bss
, WLAN_EID_SSID
);
3653 * Direct probe is sent to broadcast address as some APs
3654 * will not answer to direct packet in unassociated state.
3656 ieee80211_send_probe_req(sdata
, sdata
->vif
.addr
, NULL
,
3657 ssidie
+ 2, ssidie
[1],
3658 NULL
, 0, (u32
) -1, true, 0,
3659 auth_data
->bss
->channel
, false);
3663 if (tx_flags
== 0) {
3664 auth_data
->timeout
= jiffies
+ IEEE80211_AUTH_TIMEOUT
;
3665 auth_data
->timeout_started
= true;
3666 run_again(sdata
, auth_data
->timeout
);
3668 auth_data
->timeout
=
3669 round_jiffies_up(jiffies
+ IEEE80211_AUTH_TIMEOUT_LONG
);
3670 auth_data
->timeout_started
= true;
3671 run_again(sdata
, auth_data
->timeout
);
3677 static int ieee80211_do_assoc(struct ieee80211_sub_if_data
*sdata
)
3679 struct ieee80211_mgd_assoc_data
*assoc_data
= sdata
->u
.mgd
.assoc_data
;
3680 struct ieee80211_local
*local
= sdata
->local
;
3682 sdata_assert_lock(sdata
);
3684 assoc_data
->tries
++;
3685 if (assoc_data
->tries
> IEEE80211_ASSOC_MAX_TRIES
) {
3686 sdata_info(sdata
, "association with %pM timed out\n",
3687 assoc_data
->bss
->bssid
);
3690 * Most likely AP is not in the range so remove the
3691 * bss struct for that AP.
3693 cfg80211_unlink_bss(local
->hw
.wiphy
, assoc_data
->bss
);
3698 sdata_info(sdata
, "associate with %pM (try %d/%d)\n",
3699 assoc_data
->bss
->bssid
, assoc_data
->tries
,
3700 IEEE80211_ASSOC_MAX_TRIES
);
3701 ieee80211_send_assoc(sdata
);
3703 if (!(local
->hw
.flags
& IEEE80211_HW_REPORTS_TX_ACK_STATUS
)) {
3704 assoc_data
->timeout
= jiffies
+ IEEE80211_ASSOC_TIMEOUT
;
3705 assoc_data
->timeout_started
= true;
3706 run_again(sdata
, assoc_data
->timeout
);
3708 assoc_data
->timeout
=
3709 round_jiffies_up(jiffies
+
3710 IEEE80211_ASSOC_TIMEOUT_LONG
);
3711 assoc_data
->timeout_started
= true;
3712 run_again(sdata
, assoc_data
->timeout
);
3718 void ieee80211_mgd_conn_tx_status(struct ieee80211_sub_if_data
*sdata
,
3719 __le16 fc
, bool acked
)
3721 struct ieee80211_local
*local
= sdata
->local
;
3723 sdata
->u
.mgd
.status_fc
= fc
;
3724 sdata
->u
.mgd
.status_acked
= acked
;
3725 sdata
->u
.mgd
.status_received
= true;
3727 ieee80211_queue_work(&local
->hw
, &sdata
->work
);
3730 void ieee80211_sta_work(struct ieee80211_sub_if_data
*sdata
)
3732 struct ieee80211_local
*local
= sdata
->local
;
3733 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
3737 if (ifmgd
->status_received
) {
3738 __le16 fc
= ifmgd
->status_fc
;
3739 bool status_acked
= ifmgd
->status_acked
;
3741 ifmgd
->status_received
= false;
3742 if (ifmgd
->auth_data
&&
3743 (ieee80211_is_probe_req(fc
) || ieee80211_is_auth(fc
))) {
3745 ifmgd
->auth_data
->timeout
=
3746 jiffies
+ IEEE80211_AUTH_TIMEOUT_SHORT
;
3747 run_again(sdata
, ifmgd
->auth_data
->timeout
);
3749 ifmgd
->auth_data
->timeout
= jiffies
- 1;
3751 ifmgd
->auth_data
->timeout_started
= true;
3752 } else if (ifmgd
->assoc_data
&&
3753 (ieee80211_is_assoc_req(fc
) ||
3754 ieee80211_is_reassoc_req(fc
))) {
3756 ifmgd
->assoc_data
->timeout
=
3757 jiffies
+ IEEE80211_ASSOC_TIMEOUT_SHORT
;
3758 run_again(sdata
, ifmgd
->assoc_data
->timeout
);
3760 ifmgd
->assoc_data
->timeout
= jiffies
- 1;
3762 ifmgd
->assoc_data
->timeout_started
= true;
3766 if (ifmgd
->auth_data
&& ifmgd
->auth_data
->timeout_started
&&
3767 time_after(jiffies
, ifmgd
->auth_data
->timeout
)) {
3768 if (ifmgd
->auth_data
->done
) {
3770 * ok ... we waited for assoc but userspace didn't,
3771 * so let's just kill the auth data
3773 ieee80211_destroy_auth_data(sdata
, false);
3774 } else if (ieee80211_probe_auth(sdata
)) {
3777 memcpy(bssid
, ifmgd
->auth_data
->bss
->bssid
, ETH_ALEN
);
3779 ieee80211_destroy_auth_data(sdata
, false);
3781 cfg80211_auth_timeout(sdata
->dev
, bssid
);
3783 } else if (ifmgd
->auth_data
&& ifmgd
->auth_data
->timeout_started
)
3784 run_again(sdata
, ifmgd
->auth_data
->timeout
);
3786 if (ifmgd
->assoc_data
&& ifmgd
->assoc_data
->timeout_started
&&
3787 time_after(jiffies
, ifmgd
->assoc_data
->timeout
)) {
3788 if ((ifmgd
->assoc_data
->need_beacon
&& !ifmgd
->have_beacon
) ||
3789 ieee80211_do_assoc(sdata
)) {
3790 struct cfg80211_bss
*bss
= ifmgd
->assoc_data
->bss
;
3792 ieee80211_destroy_assoc_data(sdata
, false);
3793 cfg80211_assoc_timeout(sdata
->dev
, bss
);
3795 } else if (ifmgd
->assoc_data
&& ifmgd
->assoc_data
->timeout_started
)
3796 run_again(sdata
, ifmgd
->assoc_data
->timeout
);
3798 if (ifmgd
->flags
& IEEE80211_STA_CONNECTION_POLL
&&
3799 ifmgd
->associated
) {
3803 memcpy(bssid
, ifmgd
->associated
->bssid
, ETH_ALEN
);
3805 if (local
->hw
.flags
& IEEE80211_HW_REPORTS_TX_ACK_STATUS
)
3806 max_tries
= max_nullfunc_tries
;
3808 max_tries
= max_probe_tries
;
3810 /* ACK received for nullfunc probing frame */
3811 if (!ifmgd
->probe_send_count
)
3812 ieee80211_reset_ap_probe(sdata
);
3813 else if (ifmgd
->nullfunc_failed
) {
3814 if (ifmgd
->probe_send_count
< max_tries
) {
3816 "No ack for nullfunc frame to AP %pM, try %d/%i\n",
3817 bssid
, ifmgd
->probe_send_count
,
3819 ieee80211_mgd_probe_ap_send(sdata
);
3822 "No ack for nullfunc frame to AP %pM, disconnecting.\n",
3824 ieee80211_sta_connection_lost(sdata
, bssid
,
3825 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY
,
3828 } else if (time_is_after_jiffies(ifmgd
->probe_timeout
))
3829 run_again(sdata
, ifmgd
->probe_timeout
);
3830 else if (local
->hw
.flags
& IEEE80211_HW_REPORTS_TX_ACK_STATUS
) {
3832 "Failed to send nullfunc to AP %pM after %dms, disconnecting\n",
3833 bssid
, probe_wait_ms
);
3834 ieee80211_sta_connection_lost(sdata
, bssid
,
3835 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY
, false);
3836 } else if (ifmgd
->probe_send_count
< max_tries
) {
3838 "No probe response from AP %pM after %dms, try %d/%i\n",
3839 bssid
, probe_wait_ms
,
3840 ifmgd
->probe_send_count
, max_tries
);
3841 ieee80211_mgd_probe_ap_send(sdata
);
3844 * We actually lost the connection ... or did we?
3847 wiphy_debug(local
->hw
.wiphy
,
3848 "%s: No probe response from AP %pM"
3849 " after %dms, disconnecting.\n",
3851 bssid
, probe_wait_ms
);
3853 ieee80211_sta_connection_lost(sdata
, bssid
,
3854 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY
, false);
3858 sdata_unlock(sdata
);
3861 static void ieee80211_sta_bcn_mon_timer(unsigned long data
)
3863 struct ieee80211_sub_if_data
*sdata
=
3864 (struct ieee80211_sub_if_data
*) data
;
3865 struct ieee80211_local
*local
= sdata
->local
;
3866 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
3868 if (local
->quiescing
)
3871 if (sdata
->vif
.csa_active
&& !ifmgd
->csa_waiting_bcn
)
3874 sdata
->u
.mgd
.connection_loss
= false;
3875 ieee80211_queue_work(&sdata
->local
->hw
,
3876 &sdata
->u
.mgd
.beacon_connection_loss_work
);
3879 static void ieee80211_sta_conn_mon_timer(unsigned long data
)
3881 struct ieee80211_sub_if_data
*sdata
=
3882 (struct ieee80211_sub_if_data
*) data
;
3883 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
3884 struct ieee80211_local
*local
= sdata
->local
;
3886 if (local
->quiescing
)
3889 if (sdata
->vif
.csa_active
&& !ifmgd
->csa_waiting_bcn
)
3892 ieee80211_queue_work(&local
->hw
, &ifmgd
->monitor_work
);
3895 static void ieee80211_sta_monitor_work(struct work_struct
*work
)
3897 struct ieee80211_sub_if_data
*sdata
=
3898 container_of(work
, struct ieee80211_sub_if_data
,
3899 u
.mgd
.monitor_work
);
3901 ieee80211_mgd_probe_ap(sdata
, false);
3904 static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data
*sdata
)
3908 if (sdata
->vif
.type
== NL80211_IFTYPE_STATION
) {
3909 __ieee80211_stop_poll(sdata
);
3911 /* let's probe the connection once */
3912 flags
= sdata
->local
->hw
.flags
;
3913 if (!(flags
& IEEE80211_HW_CONNECTION_MONITOR
))
3914 ieee80211_queue_work(&sdata
->local
->hw
,
3915 &sdata
->u
.mgd
.monitor_work
);
3916 /* and do all the other regular work too */
3917 ieee80211_queue_work(&sdata
->local
->hw
, &sdata
->work
);
3922 void ieee80211_mgd_quiesce(struct ieee80211_sub_if_data
*sdata
)
3924 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
3925 u8 frame_buf
[IEEE80211_DEAUTH_FRAME_LEN
];
3929 if (ifmgd
->auth_data
|| ifmgd
->assoc_data
) {
3930 const u8
*bssid
= ifmgd
->auth_data
?
3931 ifmgd
->auth_data
->bss
->bssid
:
3932 ifmgd
->assoc_data
->bss
->bssid
;
3935 * If we are trying to authenticate / associate while suspending,
3936 * cfg80211 won't know and won't actually abort those attempts,
3937 * thus we need to do that ourselves.
3939 ieee80211_send_deauth_disassoc(sdata
, bssid
,
3940 IEEE80211_STYPE_DEAUTH
,
3941 WLAN_REASON_DEAUTH_LEAVING
,
3943 if (ifmgd
->assoc_data
)
3944 ieee80211_destroy_assoc_data(sdata
, false);
3945 if (ifmgd
->auth_data
)
3946 ieee80211_destroy_auth_data(sdata
, false);
3947 cfg80211_tx_mlme_mgmt(sdata
->dev
, frame_buf
,
3948 IEEE80211_DEAUTH_FRAME_LEN
);
3951 sdata_unlock(sdata
);
3954 void ieee80211_sta_restart(struct ieee80211_sub_if_data
*sdata
)
3956 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
3959 if (!ifmgd
->associated
) {
3960 sdata_unlock(sdata
);
3964 if (sdata
->flags
& IEEE80211_SDATA_DISCONNECT_RESUME
) {
3965 sdata
->flags
&= ~IEEE80211_SDATA_DISCONNECT_RESUME
;
3966 mlme_dbg(sdata
, "driver requested disconnect after resume\n");
3967 ieee80211_sta_connection_lost(sdata
,
3968 ifmgd
->associated
->bssid
,
3969 WLAN_REASON_UNSPECIFIED
,
3971 sdata_unlock(sdata
);
3974 sdata_unlock(sdata
);
3978 /* interface setup */
3979 void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data
*sdata
)
3981 struct ieee80211_if_managed
*ifmgd
;
3983 ifmgd
= &sdata
->u
.mgd
;
3984 INIT_WORK(&ifmgd
->monitor_work
, ieee80211_sta_monitor_work
);
3985 INIT_WORK(&ifmgd
->chswitch_work
, ieee80211_chswitch_work
);
3986 INIT_WORK(&ifmgd
->beacon_connection_loss_work
,
3987 ieee80211_beacon_connection_loss_work
);
3988 INIT_WORK(&ifmgd
->csa_connection_drop_work
,
3989 ieee80211_csa_connection_drop_work
);
3990 INIT_WORK(&ifmgd
->request_smps_work
, ieee80211_request_smps_mgd_work
);
3991 INIT_DELAYED_WORK(&ifmgd
->tdls_peer_del_work
,
3992 ieee80211_tdls_peer_del_work
);
3993 setup_timer(&ifmgd
->timer
, ieee80211_sta_timer
,
3994 (unsigned long) sdata
);
3995 setup_timer(&ifmgd
->bcn_mon_timer
, ieee80211_sta_bcn_mon_timer
,
3996 (unsigned long) sdata
);
3997 setup_timer(&ifmgd
->conn_mon_timer
, ieee80211_sta_conn_mon_timer
,
3998 (unsigned long) sdata
);
3999 setup_timer(&ifmgd
->chswitch_timer
, ieee80211_chswitch_timer
,
4000 (unsigned long) sdata
);
4001 INIT_DELAYED_WORK(&ifmgd
->tx_tspec_wk
,
4002 ieee80211_sta_handle_tspec_ac_params_wk
);
4005 ifmgd
->powersave
= sdata
->wdev
.ps
;
4006 ifmgd
->uapsd_queues
= sdata
->local
->hw
.uapsd_queues
;
4007 ifmgd
->uapsd_max_sp_len
= sdata
->local
->hw
.uapsd_max_sp_len
;
4008 ifmgd
->p2p_noa_index
= -1;
4010 if (sdata
->local
->hw
.wiphy
->features
& NL80211_FEATURE_DYNAMIC_SMPS
)
4011 ifmgd
->req_smps
= IEEE80211_SMPS_AUTOMATIC
;
4013 ifmgd
->req_smps
= IEEE80211_SMPS_OFF
;
4015 /* Setup TDLS data */
4016 spin_lock_init(&ifmgd
->teardown_lock
);
4017 ifmgd
->teardown_skb
= NULL
;
4018 ifmgd
->orig_teardown_skb
= NULL
;
4021 /* scan finished notification */
4022 void ieee80211_mlme_notify_scan_completed(struct ieee80211_local
*local
)
4024 struct ieee80211_sub_if_data
*sdata
;
4026 /* Restart STA timers */
4028 list_for_each_entry_rcu(sdata
, &local
->interfaces
, list
) {
4029 if (ieee80211_sdata_running(sdata
))
4030 ieee80211_restart_sta_timer(sdata
);
4035 int ieee80211_max_network_latency(struct notifier_block
*nb
,
4036 unsigned long data
, void *dummy
)
4038 s32 latency_usec
= (s32
) data
;
4039 struct ieee80211_local
*local
=
4040 container_of(nb
, struct ieee80211_local
,
4041 network_latency_notifier
);
4043 mutex_lock(&local
->iflist_mtx
);
4044 ieee80211_recalc_ps(local
, latency_usec
);
4045 mutex_unlock(&local
->iflist_mtx
);
4050 static u8
ieee80211_ht_vht_rx_chains(struct ieee80211_sub_if_data
*sdata
,
4051 struct cfg80211_bss
*cbss
)
4053 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
4054 const u8
*ht_cap_ie
, *vht_cap_ie
;
4055 const struct ieee80211_ht_cap
*ht_cap
;
4056 const struct ieee80211_vht_cap
*vht_cap
;
4059 if (ifmgd
->flags
& IEEE80211_STA_DISABLE_HT
)
4062 ht_cap_ie
= ieee80211_bss_get_ie(cbss
, WLAN_EID_HT_CAPABILITY
);
4063 if (ht_cap_ie
&& ht_cap_ie
[1] >= sizeof(*ht_cap
)) {
4064 ht_cap
= (void *)(ht_cap_ie
+ 2);
4065 chains
= ieee80211_mcs_to_chains(&ht_cap
->mcs
);
4067 * TODO: use "Tx Maximum Number Spatial Streams Supported" and
4068 * "Tx Unequal Modulation Supported" fields.
4072 if (ifmgd
->flags
& IEEE80211_STA_DISABLE_VHT
)
4075 vht_cap_ie
= ieee80211_bss_get_ie(cbss
, WLAN_EID_VHT_CAPABILITY
);
4076 if (vht_cap_ie
&& vht_cap_ie
[1] >= sizeof(*vht_cap
)) {
4080 vht_cap
= (void *)(vht_cap_ie
+ 2);
4081 tx_mcs_map
= le16_to_cpu(vht_cap
->supp_mcs
.tx_mcs_map
);
4082 for (nss
= 8; nss
> 0; nss
--) {
4083 if (((tx_mcs_map
>> (2 * (nss
- 1))) & 3) !=
4084 IEEE80211_VHT_MCS_NOT_SUPPORTED
)
4087 /* TODO: use "Tx Highest Supported Long GI Data Rate" field? */
4088 chains
= max(chains
, nss
);
4094 static int ieee80211_prep_channel(struct ieee80211_sub_if_data
*sdata
,
4095 struct cfg80211_bss
*cbss
)
4097 struct ieee80211_local
*local
= sdata
->local
;
4098 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
4099 const struct ieee80211_ht_cap
*ht_cap
= NULL
;
4100 const struct ieee80211_ht_operation
*ht_oper
= NULL
;
4101 const struct ieee80211_vht_operation
*vht_oper
= NULL
;
4102 struct ieee80211_supported_band
*sband
;
4103 struct cfg80211_chan_def chandef
;
4106 sband
= local
->hw
.wiphy
->bands
[cbss
->channel
->band
];
4108 ifmgd
->flags
&= ~(IEEE80211_STA_DISABLE_40MHZ
|
4109 IEEE80211_STA_DISABLE_80P80MHZ
|
4110 IEEE80211_STA_DISABLE_160MHZ
);
4114 if (!(ifmgd
->flags
& IEEE80211_STA_DISABLE_HT
) &&
4115 sband
->ht_cap
.ht_supported
) {
4116 const u8
*ht_oper_ie
, *ht_cap_ie
;
4118 ht_oper_ie
= ieee80211_bss_get_ie(cbss
, WLAN_EID_HT_OPERATION
);
4119 if (ht_oper_ie
&& ht_oper_ie
[1] >= sizeof(*ht_oper
))
4120 ht_oper
= (void *)(ht_oper_ie
+ 2);
4122 ht_cap_ie
= ieee80211_bss_get_ie(cbss
, WLAN_EID_HT_CAPABILITY
);
4123 if (ht_cap_ie
&& ht_cap_ie
[1] >= sizeof(*ht_cap
))
4124 ht_cap
= (void *)(ht_cap_ie
+ 2);
4127 ifmgd
->flags
|= IEEE80211_STA_DISABLE_HT
;
4132 if (!(ifmgd
->flags
& IEEE80211_STA_DISABLE_VHT
) &&
4133 sband
->vht_cap
.vht_supported
) {
4134 const u8
*vht_oper_ie
, *vht_cap
;
4136 vht_oper_ie
= ieee80211_bss_get_ie(cbss
,
4137 WLAN_EID_VHT_OPERATION
);
4138 if (vht_oper_ie
&& vht_oper_ie
[1] >= sizeof(*vht_oper
))
4139 vht_oper
= (void *)(vht_oper_ie
+ 2);
4140 if (vht_oper
&& !ht_oper
) {
4143 "AP advertised VHT without HT, disabling both\n");
4144 ifmgd
->flags
|= IEEE80211_STA_DISABLE_HT
;
4145 ifmgd
->flags
|= IEEE80211_STA_DISABLE_VHT
;
4148 vht_cap
= ieee80211_bss_get_ie(cbss
, WLAN_EID_VHT_CAPABILITY
);
4149 if (!vht_cap
|| vht_cap
[1] < sizeof(struct ieee80211_vht_cap
)) {
4150 ifmgd
->flags
|= IEEE80211_STA_DISABLE_VHT
;
4155 ifmgd
->flags
|= ieee80211_determine_chantype(sdata
, sband
,
4157 ht_cap
, ht_oper
, vht_oper
,
4160 sdata
->needed_rx_chains
= min(ieee80211_ht_vht_rx_chains(sdata
, cbss
),
4165 /* will change later if needed */
4166 sdata
->smps_mode
= IEEE80211_SMPS_OFF
;
4168 mutex_lock(&local
->mtx
);
4170 * If this fails (possibly due to channel context sharing
4171 * on incompatible channels, e.g. 80+80 and 160 sharing the
4172 * same control channel) try to use a smaller bandwidth.
4174 ret
= ieee80211_vif_use_channel(sdata
, &chandef
,
4175 IEEE80211_CHANCTX_SHARED
);
4177 /* don't downgrade for 5 and 10 MHz channels, though. */
4178 if (chandef
.width
== NL80211_CHAN_WIDTH_5
||
4179 chandef
.width
== NL80211_CHAN_WIDTH_10
)
4182 while (ret
&& chandef
.width
!= NL80211_CHAN_WIDTH_20_NOHT
) {
4183 ifmgd
->flags
|= ieee80211_chandef_downgrade(&chandef
);
4184 ret
= ieee80211_vif_use_channel(sdata
, &chandef
,
4185 IEEE80211_CHANCTX_SHARED
);
4188 mutex_unlock(&local
->mtx
);
4192 static int ieee80211_prep_connection(struct ieee80211_sub_if_data
*sdata
,
4193 struct cfg80211_bss
*cbss
, bool assoc
)
4195 struct ieee80211_local
*local
= sdata
->local
;
4196 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
4197 struct ieee80211_bss
*bss
= (void *)cbss
->priv
;
4198 struct sta_info
*new_sta
= NULL
;
4199 bool have_sta
= false;
4202 if (WARN_ON(!ifmgd
->auth_data
&& !ifmgd
->assoc_data
))
4207 have_sta
= sta_info_get(sdata
, cbss
->bssid
);
4212 new_sta
= sta_info_alloc(sdata
, cbss
->bssid
, GFP_KERNEL
);
4217 u32 rates
= 0, basic_rates
= 0;
4218 bool have_higher_than_11mbit
;
4219 int min_rate
= INT_MAX
, min_rate_index
= -1;
4220 struct ieee80211_chanctx_conf
*chanctx_conf
;
4221 struct ieee80211_supported_band
*sband
;
4222 const struct cfg80211_bss_ies
*ies
;
4226 sband
= local
->hw
.wiphy
->bands
[cbss
->channel
->band
];
4228 err
= ieee80211_prep_channel(sdata
, cbss
);
4230 sta_info_free(local
, new_sta
);
4233 shift
= ieee80211_vif_get_shift(&sdata
->vif
);
4236 chanctx_conf
= rcu_dereference(sdata
->vif
.chanctx_conf
);
4237 if (WARN_ON(!chanctx_conf
)) {
4239 sta_info_free(local
, new_sta
);
4242 rate_flags
= ieee80211_chandef_rate_flags(&chanctx_conf
->def
);
4245 ieee80211_get_rates(sband
, bss
->supp_rates
,
4246 bss
->supp_rates_len
,
4247 &rates
, &basic_rates
,
4248 &have_higher_than_11mbit
,
4249 &min_rate
, &min_rate_index
,
4253 * This used to be a workaround for basic rates missing
4254 * in the association response frame. Now that we no
4255 * longer use the basic rates from there, it probably
4256 * doesn't happen any more, but keep the workaround so
4257 * in case some *other* APs are buggy in different ways
4258 * we can connect -- with a warning.
4260 if (!basic_rates
&& min_rate_index
>= 0) {
4262 "No basic rates, using min rate instead\n");
4263 basic_rates
= BIT(min_rate_index
);
4266 new_sta
->sta
.supp_rates
[cbss
->channel
->band
] = rates
;
4267 sdata
->vif
.bss_conf
.basic_rates
= basic_rates
;
4269 /* cf. IEEE 802.11 9.2.12 */
4270 if (cbss
->channel
->band
== IEEE80211_BAND_2GHZ
&&
4271 have_higher_than_11mbit
)
4272 sdata
->flags
|= IEEE80211_SDATA_OPERATING_GMODE
;
4274 sdata
->flags
&= ~IEEE80211_SDATA_OPERATING_GMODE
;
4276 memcpy(ifmgd
->bssid
, cbss
->bssid
, ETH_ALEN
);
4278 /* set timing information */
4279 sdata
->vif
.bss_conf
.beacon_int
= cbss
->beacon_interval
;
4281 ies
= rcu_dereference(cbss
->beacon_ies
);
4285 sdata
->vif
.bss_conf
.sync_tsf
= ies
->tsf
;
4286 sdata
->vif
.bss_conf
.sync_device_ts
=
4287 bss
->device_ts_beacon
;
4288 tim_ie
= cfg80211_find_ie(WLAN_EID_TIM
,
4289 ies
->data
, ies
->len
);
4290 if (tim_ie
&& tim_ie
[1] >= 2)
4291 sdata
->vif
.bss_conf
.sync_dtim_count
= tim_ie
[2];
4293 sdata
->vif
.bss_conf
.sync_dtim_count
= 0;
4294 } else if (!(local
->hw
.flags
&
4295 IEEE80211_HW_TIMING_BEACON_ONLY
)) {
4296 ies
= rcu_dereference(cbss
->proberesp_ies
);
4297 /* must be non-NULL since beacon IEs were NULL */
4298 sdata
->vif
.bss_conf
.sync_tsf
= ies
->tsf
;
4299 sdata
->vif
.bss_conf
.sync_device_ts
=
4300 bss
->device_ts_presp
;
4301 sdata
->vif
.bss_conf
.sync_dtim_count
= 0;
4303 sdata
->vif
.bss_conf
.sync_tsf
= 0;
4304 sdata
->vif
.bss_conf
.sync_device_ts
= 0;
4305 sdata
->vif
.bss_conf
.sync_dtim_count
= 0;
4309 /* tell driver about BSSID, basic rates and timing */
4310 ieee80211_bss_info_change_notify(sdata
,
4311 BSS_CHANGED_BSSID
| BSS_CHANGED_BASIC_RATES
|
4312 BSS_CHANGED_BEACON_INT
);
4315 sta_info_pre_move_state(new_sta
, IEEE80211_STA_AUTH
);
4317 err
= sta_info_insert(new_sta
);
4321 "failed to insert STA entry for the AP (error %d)\n",
4326 WARN_ON_ONCE(!ether_addr_equal(ifmgd
->bssid
, cbss
->bssid
));
4332 int ieee80211_mgd_auth(struct ieee80211_sub_if_data
*sdata
,
4333 struct cfg80211_auth_request
*req
)
4335 struct ieee80211_local
*local
= sdata
->local
;
4336 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
4337 struct ieee80211_mgd_auth_data
*auth_data
;
4341 /* prepare auth data structure */
4343 switch (req
->auth_type
) {
4344 case NL80211_AUTHTYPE_OPEN_SYSTEM
:
4345 auth_alg
= WLAN_AUTH_OPEN
;
4347 case NL80211_AUTHTYPE_SHARED_KEY
:
4348 if (IS_ERR(local
->wep_tx_tfm
))
4350 auth_alg
= WLAN_AUTH_SHARED_KEY
;
4352 case NL80211_AUTHTYPE_FT
:
4353 auth_alg
= WLAN_AUTH_FT
;
4355 case NL80211_AUTHTYPE_NETWORK_EAP
:
4356 auth_alg
= WLAN_AUTH_LEAP
;
4358 case NL80211_AUTHTYPE_SAE
:
4359 auth_alg
= WLAN_AUTH_SAE
;
4365 auth_data
= kzalloc(sizeof(*auth_data
) + req
->sae_data_len
+
4366 req
->ie_len
, GFP_KERNEL
);
4370 auth_data
->bss
= req
->bss
;
4372 if (req
->sae_data_len
>= 4) {
4373 __le16
*pos
= (__le16
*) req
->sae_data
;
4374 auth_data
->sae_trans
= le16_to_cpu(pos
[0]);
4375 auth_data
->sae_status
= le16_to_cpu(pos
[1]);
4376 memcpy(auth_data
->data
, req
->sae_data
+ 4,
4377 req
->sae_data_len
- 4);
4378 auth_data
->data_len
+= req
->sae_data_len
- 4;
4381 if (req
->ie
&& req
->ie_len
) {
4382 memcpy(&auth_data
->data
[auth_data
->data_len
],
4383 req
->ie
, req
->ie_len
);
4384 auth_data
->data_len
+= req
->ie_len
;
4387 if (req
->key
&& req
->key_len
) {
4388 auth_data
->key_len
= req
->key_len
;
4389 auth_data
->key_idx
= req
->key_idx
;
4390 memcpy(auth_data
->key
, req
->key
, req
->key_len
);
4393 auth_data
->algorithm
= auth_alg
;
4395 /* try to authenticate/probe */
4397 if ((ifmgd
->auth_data
&& !ifmgd
->auth_data
->done
) ||
4398 ifmgd
->assoc_data
) {
4403 if (ifmgd
->auth_data
)
4404 ieee80211_destroy_auth_data(sdata
, false);
4406 /* prep auth_data so we don't go into idle on disassoc */
4407 ifmgd
->auth_data
= auth_data
;
4409 if (ifmgd
->associated
) {
4410 u8 frame_buf
[IEEE80211_DEAUTH_FRAME_LEN
];
4412 ieee80211_set_disassoc(sdata
, IEEE80211_STYPE_DEAUTH
,
4413 WLAN_REASON_UNSPECIFIED
,
4416 cfg80211_tx_mlme_mgmt(sdata
->dev
, frame_buf
,
4420 sdata_info(sdata
, "authenticate with %pM\n", req
->bss
->bssid
);
4422 err
= ieee80211_prep_connection(sdata
, req
->bss
, false);
4426 err
= ieee80211_probe_auth(sdata
);
4428 sta_info_destroy_addr(sdata
, req
->bss
->bssid
);
4432 /* hold our own reference */
4433 cfg80211_ref_bss(local
->hw
.wiphy
, auth_data
->bss
);
4437 memset(ifmgd
->bssid
, 0, ETH_ALEN
);
4438 ieee80211_bss_info_change_notify(sdata
, BSS_CHANGED_BSSID
);
4439 ifmgd
->auth_data
= NULL
;
4445 static bool ieee80211_usable_wmm_params(struct ieee80211_sub_if_data
*sdata
,
4446 const u8
*wmm_param
, int len
)
4454 if (wmm_param
[5] != 1 /* version */)
4457 pos
= wmm_param
+ 8;
4460 for (; left
>= 4; left
-= 4, pos
+= 4) {
4461 u8 aifsn
= pos
[0] & 0x0f;
4462 u8 ecwmin
= pos
[1] & 0x0f;
4463 u8 ecwmax
= (pos
[1] & 0xf0) >> 4;
4464 int aci
= (pos
[0] >> 5) & 0x03;
4468 "AP has invalid WMM params (AIFSN=%d for ACI %d), disabling WMM\n",
4472 if (ecwmin
> ecwmax
) {
4474 "AP has invalid WMM params (ECWmin/max=%d/%d for ACI %d), disabling WMM\n",
4475 ecwmin
, ecwmax
, aci
);
4483 int ieee80211_mgd_assoc(struct ieee80211_sub_if_data
*sdata
,
4484 struct cfg80211_assoc_request
*req
)
4486 struct ieee80211_local
*local
= sdata
->local
;
4487 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
4488 struct ieee80211_bss
*bss
= (void *)req
->bss
->priv
;
4489 struct ieee80211_mgd_assoc_data
*assoc_data
;
4490 const struct cfg80211_bss_ies
*beacon_ies
;
4491 struct ieee80211_supported_band
*sband
;
4492 const u8
*ssidie
, *ht_ie
, *vht_ie
;
4495 assoc_data
= kzalloc(sizeof(*assoc_data
) + req
->ie_len
, GFP_KERNEL
);
4500 ssidie
= ieee80211_bss_get_ie(req
->bss
, WLAN_EID_SSID
);
4506 memcpy(assoc_data
->ssid
, ssidie
+ 2, ssidie
[1]);
4507 assoc_data
->ssid_len
= ssidie
[1];
4510 if (ifmgd
->associated
) {
4511 u8 frame_buf
[IEEE80211_DEAUTH_FRAME_LEN
];
4513 ieee80211_set_disassoc(sdata
, IEEE80211_STYPE_DEAUTH
,
4514 WLAN_REASON_UNSPECIFIED
,
4517 cfg80211_tx_mlme_mgmt(sdata
->dev
, frame_buf
,
4521 if (ifmgd
->auth_data
&& !ifmgd
->auth_data
->done
) {
4526 if (ifmgd
->assoc_data
) {
4531 if (ifmgd
->auth_data
) {
4534 /* keep sta info, bssid if matching */
4535 match
= ether_addr_equal(ifmgd
->bssid
, req
->bss
->bssid
);
4536 ieee80211_destroy_auth_data(sdata
, match
);
4539 /* prepare assoc data */
4541 ifmgd
->beacon_crc_valid
= false;
4543 assoc_data
->wmm
= bss
->wmm_used
&&
4544 (local
->hw
.queues
>= IEEE80211_NUM_ACS
);
4545 if (assoc_data
->wmm
) {
4546 /* try to check validity of WMM params IE */
4547 const struct cfg80211_bss_ies
*ies
;
4548 const u8
*wp
, *start
, *end
;
4551 ies
= rcu_dereference(req
->bss
->ies
);
4553 end
= start
+ ies
->len
;
4556 wp
= cfg80211_find_vendor_ie(
4558 WLAN_OUI_TYPE_MICROSOFT_WMM
,
4559 start
, end
- start
);
4562 start
= wp
+ wp
[1] + 2;
4563 /* if this IE is too short, try the next */
4566 /* if this IE is WMM params, we found what we wanted */
4571 if (!wp
|| !ieee80211_usable_wmm_params(sdata
, wp
+ 2,
4573 assoc_data
->wmm
= false;
4574 ifmgd
->flags
|= IEEE80211_STA_DISABLE_WMM
;
4580 * IEEE802.11n does not allow TKIP/WEP as pairwise ciphers in HT mode.
4581 * We still associate in non-HT mode (11a/b/g) if any one of these
4582 * ciphers is configured as pairwise.
4583 * We can set this to true for non-11n hardware, that'll be checked
4584 * separately along with the peer capabilities.
4586 for (i
= 0; i
< req
->crypto
.n_ciphers_pairwise
; i
++) {
4587 if (req
->crypto
.ciphers_pairwise
[i
] == WLAN_CIPHER_SUITE_WEP40
||
4588 req
->crypto
.ciphers_pairwise
[i
] == WLAN_CIPHER_SUITE_TKIP
||
4589 req
->crypto
.ciphers_pairwise
[i
] == WLAN_CIPHER_SUITE_WEP104
) {
4590 ifmgd
->flags
|= IEEE80211_STA_DISABLE_HT
;
4591 ifmgd
->flags
|= IEEE80211_STA_DISABLE_VHT
;
4592 netdev_info(sdata
->dev
,
4593 "disabling HT/VHT due to WEP/TKIP use\n");
4597 if (req
->flags
& ASSOC_REQ_DISABLE_HT
) {
4598 ifmgd
->flags
|= IEEE80211_STA_DISABLE_HT
;
4599 ifmgd
->flags
|= IEEE80211_STA_DISABLE_VHT
;
4602 if (req
->flags
& ASSOC_REQ_DISABLE_VHT
)
4603 ifmgd
->flags
|= IEEE80211_STA_DISABLE_VHT
;
4605 /* Also disable HT if we don't support it or the AP doesn't use WMM */
4606 sband
= local
->hw
.wiphy
->bands
[req
->bss
->channel
->band
];
4607 if (!sband
->ht_cap
.ht_supported
||
4608 local
->hw
.queues
< IEEE80211_NUM_ACS
|| !bss
->wmm_used
||
4609 ifmgd
->flags
& IEEE80211_STA_DISABLE_WMM
) {
4610 ifmgd
->flags
|= IEEE80211_STA_DISABLE_HT
;
4611 if (!bss
->wmm_used
&&
4612 !(ifmgd
->flags
& IEEE80211_STA_DISABLE_WMM
))
4613 netdev_info(sdata
->dev
,
4614 "disabling HT as WMM/QoS is not supported by the AP\n");
4617 /* disable VHT if we don't support it or the AP doesn't use WMM */
4618 if (!sband
->vht_cap
.vht_supported
||
4619 local
->hw
.queues
< IEEE80211_NUM_ACS
|| !bss
->wmm_used
||
4620 ifmgd
->flags
& IEEE80211_STA_DISABLE_WMM
) {
4621 ifmgd
->flags
|= IEEE80211_STA_DISABLE_VHT
;
4622 if (!bss
->wmm_used
&&
4623 !(ifmgd
->flags
& IEEE80211_STA_DISABLE_WMM
))
4624 netdev_info(sdata
->dev
,
4625 "disabling VHT as WMM/QoS is not supported by the AP\n");
4628 memcpy(&ifmgd
->ht_capa
, &req
->ht_capa
, sizeof(ifmgd
->ht_capa
));
4629 memcpy(&ifmgd
->ht_capa_mask
, &req
->ht_capa_mask
,
4630 sizeof(ifmgd
->ht_capa_mask
));
4632 memcpy(&ifmgd
->vht_capa
, &req
->vht_capa
, sizeof(ifmgd
->vht_capa
));
4633 memcpy(&ifmgd
->vht_capa_mask
, &req
->vht_capa_mask
,
4634 sizeof(ifmgd
->vht_capa_mask
));
4636 if (req
->ie
&& req
->ie_len
) {
4637 memcpy(assoc_data
->ie
, req
->ie
, req
->ie_len
);
4638 assoc_data
->ie_len
= req
->ie_len
;
4641 assoc_data
->bss
= req
->bss
;
4643 if (ifmgd
->req_smps
== IEEE80211_SMPS_AUTOMATIC
) {
4644 if (ifmgd
->powersave
)
4645 sdata
->smps_mode
= IEEE80211_SMPS_DYNAMIC
;
4647 sdata
->smps_mode
= IEEE80211_SMPS_OFF
;
4649 sdata
->smps_mode
= ifmgd
->req_smps
;
4651 assoc_data
->capability
= req
->bss
->capability
;
4652 assoc_data
->supp_rates
= bss
->supp_rates
;
4653 assoc_data
->supp_rates_len
= bss
->supp_rates_len
;
4656 ht_ie
= ieee80211_bss_get_ie(req
->bss
, WLAN_EID_HT_OPERATION
);
4657 if (ht_ie
&& ht_ie
[1] >= sizeof(struct ieee80211_ht_operation
))
4658 assoc_data
->ap_ht_param
=
4659 ((struct ieee80211_ht_operation
*)(ht_ie
+ 2))->ht_param
;
4661 ifmgd
->flags
|= IEEE80211_STA_DISABLE_HT
;
4662 vht_ie
= ieee80211_bss_get_ie(req
->bss
, WLAN_EID_VHT_CAPABILITY
);
4663 if (vht_ie
&& vht_ie
[1] >= sizeof(struct ieee80211_vht_cap
))
4664 memcpy(&assoc_data
->ap_vht_cap
, vht_ie
+ 2,
4665 sizeof(struct ieee80211_vht_cap
));
4667 ifmgd
->flags
|= IEEE80211_STA_DISABLE_VHT
;
4670 if (WARN((sdata
->vif
.driver_flags
& IEEE80211_VIF_SUPPORTS_UAPSD
) &&
4671 (local
->hw
.flags
& IEEE80211_HW_PS_NULLFUNC_STACK
),
4672 "U-APSD not supported with HW_PS_NULLFUNC_STACK\n"))
4673 sdata
->vif
.driver_flags
&= ~IEEE80211_VIF_SUPPORTS_UAPSD
;
4675 if (bss
->wmm_used
&& bss
->uapsd_supported
&&
4676 (sdata
->vif
.driver_flags
& IEEE80211_VIF_SUPPORTS_UAPSD
)) {
4677 assoc_data
->uapsd
= true;
4678 ifmgd
->flags
|= IEEE80211_STA_UAPSD_ENABLED
;
4680 assoc_data
->uapsd
= false;
4681 ifmgd
->flags
&= ~IEEE80211_STA_UAPSD_ENABLED
;
4684 if (req
->prev_bssid
)
4685 memcpy(assoc_data
->prev_bssid
, req
->prev_bssid
, ETH_ALEN
);
4688 ifmgd
->mfp
= IEEE80211_MFP_REQUIRED
;
4689 ifmgd
->flags
|= IEEE80211_STA_MFP_ENABLED
;
4691 ifmgd
->mfp
= IEEE80211_MFP_DISABLED
;
4692 ifmgd
->flags
&= ~IEEE80211_STA_MFP_ENABLED
;
4695 if (req
->flags
& ASSOC_REQ_USE_RRM
)
4696 ifmgd
->flags
|= IEEE80211_STA_ENABLE_RRM
;
4698 ifmgd
->flags
&= ~IEEE80211_STA_ENABLE_RRM
;
4700 if (req
->crypto
.control_port
)
4701 ifmgd
->flags
|= IEEE80211_STA_CONTROL_PORT
;
4703 ifmgd
->flags
&= ~IEEE80211_STA_CONTROL_PORT
;
4705 sdata
->control_port_protocol
= req
->crypto
.control_port_ethertype
;
4706 sdata
->control_port_no_encrypt
= req
->crypto
.control_port_no_encrypt
;
4707 sdata
->encrypt_headroom
= ieee80211_cs_headroom(local
, &req
->crypto
,
4710 /* kick off associate process */
4712 ifmgd
->assoc_data
= assoc_data
;
4713 ifmgd
->dtim_period
= 0;
4714 ifmgd
->have_beacon
= false;
4716 err
= ieee80211_prep_connection(sdata
, req
->bss
, true);
4721 beacon_ies
= rcu_dereference(req
->bss
->beacon_ies
);
4723 if (sdata
->local
->hw
.flags
& IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC
&&
4726 * Wait up to one beacon interval ...
4727 * should this be more if we miss one?
4729 sdata_info(sdata
, "waiting for beacon from %pM\n",
4731 assoc_data
->timeout
= TU_TO_EXP_TIME(req
->bss
->beacon_interval
);
4732 assoc_data
->timeout_started
= true;
4733 assoc_data
->need_beacon
= true;
4734 } else if (beacon_ies
) {
4735 const u8
*tim_ie
= cfg80211_find_ie(WLAN_EID_TIM
,
4740 if (tim_ie
&& tim_ie
[1] >= sizeof(struct ieee80211_tim_ie
)) {
4741 const struct ieee80211_tim_ie
*tim
;
4742 tim
= (void *)(tim_ie
+ 2);
4743 ifmgd
->dtim_period
= tim
->dtim_period
;
4744 dtim_count
= tim
->dtim_count
;
4746 ifmgd
->have_beacon
= true;
4747 assoc_data
->timeout
= jiffies
;
4748 assoc_data
->timeout_started
= true;
4750 if (local
->hw
.flags
& IEEE80211_HW_TIMING_BEACON_ONLY
) {
4751 sdata
->vif
.bss_conf
.sync_tsf
= beacon_ies
->tsf
;
4752 sdata
->vif
.bss_conf
.sync_device_ts
=
4753 bss
->device_ts_beacon
;
4754 sdata
->vif
.bss_conf
.sync_dtim_count
= dtim_count
;
4757 assoc_data
->timeout
= jiffies
;
4758 assoc_data
->timeout_started
= true;
4762 run_again(sdata
, assoc_data
->timeout
);
4764 if (bss
->corrupt_data
) {
4765 char *corrupt_type
= "data";
4766 if (bss
->corrupt_data
& IEEE80211_BSS_CORRUPT_BEACON
) {
4767 if (bss
->corrupt_data
&
4768 IEEE80211_BSS_CORRUPT_PROBE_RESP
)
4769 corrupt_type
= "beacon and probe response";
4771 corrupt_type
= "beacon";
4772 } else if (bss
->corrupt_data
& IEEE80211_BSS_CORRUPT_PROBE_RESP
)
4773 corrupt_type
= "probe response";
4774 sdata_info(sdata
, "associating with AP with corrupt %s\n",
4780 memset(ifmgd
->bssid
, 0, ETH_ALEN
);
4781 ieee80211_bss_info_change_notify(sdata
, BSS_CHANGED_BSSID
);
4782 ifmgd
->assoc_data
= NULL
;
4788 int ieee80211_mgd_deauth(struct ieee80211_sub_if_data
*sdata
,
4789 struct cfg80211_deauth_request
*req
)
4791 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
4792 u8 frame_buf
[IEEE80211_DEAUTH_FRAME_LEN
];
4793 bool tx
= !req
->local_state_change
;
4795 if (ifmgd
->auth_data
&&
4796 ether_addr_equal(ifmgd
->auth_data
->bss
->bssid
, req
->bssid
)) {
4798 "aborting authentication with %pM by local choice (Reason: %u=%s)\n",
4799 req
->bssid
, req
->reason_code
,
4800 ieee80211_get_reason_code_string(req
->reason_code
));
4802 drv_mgd_prepare_tx(sdata
->local
, sdata
);
4803 ieee80211_send_deauth_disassoc(sdata
, req
->bssid
,
4804 IEEE80211_STYPE_DEAUTH
,
4805 req
->reason_code
, tx
,
4807 ieee80211_destroy_auth_data(sdata
, false);
4808 cfg80211_tx_mlme_mgmt(sdata
->dev
, frame_buf
,
4809 IEEE80211_DEAUTH_FRAME_LEN
);
4814 if (ifmgd
->associated
&&
4815 ether_addr_equal(ifmgd
->associated
->bssid
, req
->bssid
)) {
4817 "deauthenticating from %pM by local choice (Reason: %u=%s)\n",
4818 req
->bssid
, req
->reason_code
,
4819 ieee80211_get_reason_code_string(req
->reason_code
));
4821 ieee80211_set_disassoc(sdata
, IEEE80211_STYPE_DEAUTH
,
4822 req
->reason_code
, tx
, frame_buf
);
4823 cfg80211_tx_mlme_mgmt(sdata
->dev
, frame_buf
,
4824 IEEE80211_DEAUTH_FRAME_LEN
);
4831 int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data
*sdata
,
4832 struct cfg80211_disassoc_request
*req
)
4834 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
4836 u8 frame_buf
[IEEE80211_DEAUTH_FRAME_LEN
];
4839 * cfg80211 should catch this ... but it's racy since
4840 * we can receive a disassoc frame, process it, hand it
4841 * to cfg80211 while that's in a locked section already
4842 * trying to tell us that the user wants to disconnect.
4844 if (ifmgd
->associated
!= req
->bss
)
4848 "disassociating from %pM by local choice (Reason: %u=%s)\n",
4849 req
->bss
->bssid
, req
->reason_code
, ieee80211_get_reason_code_string(req
->reason_code
));
4851 memcpy(bssid
, req
->bss
->bssid
, ETH_ALEN
);
4852 ieee80211_set_disassoc(sdata
, IEEE80211_STYPE_DISASSOC
,
4853 req
->reason_code
, !req
->local_state_change
,
4856 cfg80211_tx_mlme_mgmt(sdata
->dev
, frame_buf
,
4857 IEEE80211_DEAUTH_FRAME_LEN
);
4862 void ieee80211_mgd_stop(struct ieee80211_sub_if_data
*sdata
)
4864 struct ieee80211_if_managed
*ifmgd
= &sdata
->u
.mgd
;
4867 * Make sure some work items will not run after this,
4868 * they will not do anything but might not have been
4869 * cancelled when disconnecting.
4871 cancel_work_sync(&ifmgd
->monitor_work
);
4872 cancel_work_sync(&ifmgd
->beacon_connection_loss_work
);
4873 cancel_work_sync(&ifmgd
->request_smps_work
);
4874 cancel_work_sync(&ifmgd
->csa_connection_drop_work
);
4875 cancel_work_sync(&ifmgd
->chswitch_work
);
4876 cancel_delayed_work_sync(&ifmgd
->tdls_peer_del_work
);
4879 if (ifmgd
->assoc_data
) {
4880 struct cfg80211_bss
*bss
= ifmgd
->assoc_data
->bss
;
4881 ieee80211_destroy_assoc_data(sdata
, false);
4882 cfg80211_assoc_timeout(sdata
->dev
, bss
);
4884 if (ifmgd
->auth_data
)
4885 ieee80211_destroy_auth_data(sdata
, false);
4886 spin_lock_bh(&ifmgd
->teardown_lock
);
4887 if (ifmgd
->teardown_skb
) {
4888 kfree_skb(ifmgd
->teardown_skb
);
4889 ifmgd
->teardown_skb
= NULL
;
4890 ifmgd
->orig_teardown_skb
= NULL
;
4892 spin_unlock_bh(&ifmgd
->teardown_lock
);
4893 del_timer_sync(&ifmgd
->timer
);
4894 sdata_unlock(sdata
);
4897 void ieee80211_cqm_rssi_notify(struct ieee80211_vif
*vif
,
4898 enum nl80211_cqm_rssi_threshold_event rssi_event
,
4901 struct ieee80211_sub_if_data
*sdata
= vif_to_sdata(vif
);
4903 trace_api_cqm_rssi_notify(sdata
, rssi_event
);
4905 cfg80211_cqm_rssi_notify(sdata
->dev
, rssi_event
, gfp
);
4907 EXPORT_SYMBOL(ieee80211_cqm_rssi_notify
);
4909 void ieee80211_cqm_beacon_loss_notify(struct ieee80211_vif
*vif
, gfp_t gfp
)
4911 struct ieee80211_sub_if_data
*sdata
= vif_to_sdata(vif
);
4913 trace_api_cqm_beacon_loss_notify(sdata
->local
, sdata
);
4915 cfg80211_cqm_beacon_loss_notify(sdata
->dev
, gfp
);
4917 EXPORT_SYMBOL(ieee80211_cqm_beacon_loss_notify
);