opcodes/ChangeLog

   1 2001-05-04  Frank Ch. Eigler  <fche@redhat.com>
   2
   3         * m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
   4
   5 2001-05-04  Frank Ch. Eigler  <fche@redhat.com>
   6
   7         * cgen-dis.in (print_insn): Remove call to read_insn.  Instead,
   8         assume incoming buffer already has the base insn loaded.  Handle
   9         case of smaller-than-base instructions for variable-length case.
  10
  11 2001-05-04  Alan Modra  <amodra@one.net.au>
  12
  13         * i386-dis.c (Ev, Ed): Remove duplicate define.
  14         (Gd): Define.
  15         (XS): Define.
  16         (OP_XS): New function.
  17         (dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
  18         movmskp operands.
  19         (dis386_twobyte_intel): Likewise.
  20         (prefix_user_table): Use MS for maskmovq operand.
  21
  22 2001-04-27  Johan Rydberg  <jrydberg@opencores.org>
  23
  24         * Makefile.am: Add OpenRISC target.
  25         * Makefile.in: Regenerated.
  26
  27         * disassemble.c (disassembler): Recognize the OpenRISC disassembly.
  28
  29         * configure.in (bfd_openrisc_arch): Add target.
  30         * configure: Regenerated.
  31
  32         * openrisc-asm.c: New file.
  33         * openrisc-desc.c: Likewise.
  34         * openrisc-desc.h: Likewise.
  35         * openrisc-dis.c: Likewise.
  36         * openrisc-ibld.c: Likewise.
  37         * openrisc-opc.c: Likewise.
  38         * openrisc-opc.h: Likewise.
  39
  40 2001-04-24  Christian Groessler  <cpg@aladdin.de>
  41
  42         * z8k-dis.c: add names of control registers (ctrl_names);
  43         (seg_length): provides instruction length fixup for segmented
  44         mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
  45         CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
  46         (unparse_intr): handle CLASS_PR, print addresses without '#'
  47         * z8k-opc.h: re-created with new z8kgen
  48         * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
  49         entries for ldctl/ldctlb instruction
  50
  51 2001-04-06  Andreas Jaeger  <aj@suse.de>
  52
  53         * i386-dis.c: Add ffreep instruction.
  54
  55 2001-03-30  Alexandre Oliva  <aoliva@redhat.com>
  56
  57         * ppc-opc.c (insert_mbe): Shift mask initializer as long.
  58
  59 2001-03-24  Alan Modra  <alan@linuxcare.com.au>
  60
  61         * i386-dis.c (PREGRP25): Define.
  62         (dis386_twobyte_att): Use here in place of "movntq" entry.
  63         (dis386_twobyte_intel): Likewise.
  64         (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
  65         (PREGRP26): Define.
  66         (dis386_twobyte_att): Use here.
  67         (dis386_twobyte_intel): Likewise.
  68         (prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
  69         (prefix_user_table <maskmovdqu>): XM operand, not MX.
  70         (prefix_user_table): Cosmetic changes to "bad" entries.
  71
  72 2001-03-23  Nick Clifton  <nickc@redhat.com>
  73
  74         * mips-opc.c: Remove extraneous whitespace.
  75         * mips-dis.c: Remove extraneous whitespace.
  76
  77 2001-03-22  Ben Elliston  <bje@redhat.com>
  78
  79         * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
  80         declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
  81         * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
  82         to allay a compiler warning.
  83
  84 2001-03-22  Alan Modra  <alan@linuxcare.com.au>
  85
  86         * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
  87         (dis386_twobyte_intel): Likewise.
  88         (twobyte_has_modrm): Set entry for paddq, psubq.
  89
  90 2001-03-20  Patrick Macdonald  <patrickm@redhat.com>
  91
  92         * cgen-dis.in (print_insn_@arch@): Add support for target machine
  93         determination via CGEN_COMPUTE_MACH.
  94         * fr30-desc.c: Regenerate.
  95         * fr30-dis.c: Regenerate.
  96         * fr30-opc.h: Regenerate.
  97         * m32r-desc.c: Regenerate.
  98         * m32r-dis.c: Regenerate.
  99         * m32r-opc.h: Regenerate.
 100         * m32r-opinst.c: Regenerate.
 101
 102 2001-03-20  H.J. Lu  <hjl@gnu.org>
 103
 104         * configure.in: Remove the redundent AC_ARG_PROGRAM.
 105         * configure: Rebuild.
 106
 107 2001-03-19  Jim Wilson  <wilson@redhat.com>
 108
 109         * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
 110         notestr if larger than xsect.
 111         (in_class): Handle format M5.
 112         * ia64-asmtab.c: Regnerate.
 113
 114 2001-03-19  John David Anglin  <dave@hiauly1.hia.nrc.ca>
 115
 116         * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
 117         has more than one byte left to read.
 118
 119 2001-03-16  Martin Schwidefsky  <schwidefsky@de.ibm.com>
 120
 121         * s390-opc.c: Add new opcodes.  Smooth out formatting.
 122         * s390-opc.txt: Add new opcodes.
 123
 124 2001-03-06  Nick Clifton  <nickc@redhat.com>
 125
 126         * arm-dis.c (print_insn_thumb): Compute destination address
 127         of BLX(1) instruction by taking bit 1 from PC and not from bit
 128         0 of the offset.
 129
 130 2001-03-06  Igor Shevlyakov  <igor@windriver.com>
 131
 132         * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
 133         so command line switches will work.
 134
 135 2001-03-05  Dave Brolley  <brolley@redhat.com>
 136
 137         * fr30-asm.c: Regenerate.
 138         * fr30-desc.c: Regenerate.
 139         * fr30-desc.h: Regenerate.
 140         * fr30-dis.c: Regenerate.
 141         * fr30-ibld.c: Regenerate.
 142         * fr30-opc.c: Regenerate.
 143         * fr30-opc.h: Regenerate.
 144         * m32r-asm.c: Regenerate.
 145         * m32r-desc.c: Regenerate.
 146         * m32r-desc.h: Regenerate.
 147         * m32r-dis.c: Regenerate.
 148         * m32r-ibld.c: Regenerate.
 149         * m32r-opc.c: Regenerate.
 150         * m32r-opc.h: Regenerate.
 151         * m32r-opinst.c: Regenerate.
 152
 153 2001-02-28  Igor Shevlyakov  <igor@windriver.com>
 154
 155         * m68k-opc.c: fix cpushl according to Motorola. Enable
 156         bunch of instructions for Coldfire 5407 and add all new.
 157
 158 2001-02-27  Alan Modra  <alan@linuxcare.com.au>
 159
 160         * configure.in (BFD_VERSION): Do without grep.
 161         * configure: Regenerate.
 162         * Makefile.am: Run "make dep-am".
 163         * Makefile.in: Regenerate.
 164
 165 2001-02-23  David Mosberger  <davidm@hpl.hp.com>
 166
 167         * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
 168         * ia64-asmtab.c: Regenerate.
 169
 170 2001-02-21  David Mosberger  <davidm@hpl.hp.com>
 171
 172         * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
 173         separate variants: one for IMM22 and the other for IMM14.
 174         * ia64-asmtab.c: Regenerate.
 175
 176 2001-02-21  Greg McGary  <greg@mcgary.org>
 177
 178         * cgen-opc.c (cgen_get_insn_value): Add missing `return'.
 179
 180 2001-02-20  H.J. Lu  <hjl@gnu.org>
 181
 182         * Makefile.am (ia64-ic.tbl): Remove the target.
 183         (ia64-raw.tbl): Likewise.
 184         (ia64-waw.tbl): Likewise.
 185         (ia64-war.tbl): Likewise.
 186         (ia64-asmtab.c): Generate it in the source directory.
 187         * Makefile.in: Regenerated.
 188
 189 2001-02-18  lars brinkhoff  <lars@nocrew.org>
 190
 191         * Makefile.am: Add PDP-11 target.
 192         * configure.in: Likewise.
 193         * disassemble.c: Likewise.
 194         * pdp11-dis.c: New file.
 195         * pdp11-opc.c: New file.
 196
 197 2001-02-14  Jim Wilson  <wilson@redhat.com>
 198
 199         * ia64-ic.tbl: Update from Intel.  Add setf to fr-writers.
 200         * ia64-asmtab.c: Regenerate.
 201
 202 Mon Feb 12 17:41:26 CET 2001  Jan Hubicka  <jh@suse.cz>
 203
 204         * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
 205         instructions.
 206         (putop): Handle 'Y'
 207
 208 2001-02-11  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>
 209
 210         * mips-dis.c (print_insn_arg): Use top four bits of the address of
 211         the following instruction not of the jump itself for the jump
 212         target.
 213         (print_mips16_insn_arg): Likewise.
 214
 215 2001-02-11  Michael Sokolov  <msokolov@ivan.Harhan.ORG>
 216
 217         * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
 218         directory.
 219         * Makefile.in: Regenerate.
 220
 221 2001-02-09  Schwidefsky  <schwidefsky@de.ibm.com>
 222
 223         * Makefile.am: Add linux target for S/390.
 224         * Makefile.in: Likewise.
 225         * configure.in: Likewise.
 226         * disassemble.c: Likewise.
 227         * s390-dis.c: New file.
 228         * s390-mkopc.c: New file.
 229         * s390-opc.c: New file.
 230         * s390-opc.txt: New file.
 231
 232 2001-02-05  Jim Wilson  <wilson@redhat.com>
 233
 234         * ia64-asmtab.c: Revert 2000-12-16 change.
 235
 236 2001-02-02  Patrick Macdonald  <patrickm@redhat.com>
 237
 238         * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
 239         * m32r-desc.h: Regenerate.
 240
 241 Thu Feb  1 16:29:06 MET 2001  Jan Hubicka  <jh@suse.cz>
 242
 243         * i386-dis.c (dis386_att, grps): Use 'T' for push/pop
 244         (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
 245
 246 2001-01-14  Alan Modra  <alan@linuxcare.com.au>
 247
 248         * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
 249
 250 2001-01-13  Nick Clifton  <nickc@redhat.com>
 251
 252         * disassemble.c: Remove spurious white space.
 253
 254 Sat Jan 13 01:48:24 MET 2001  Jan Hubicka  <jh@suse.cz>
 255
 256         * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
 257         templates.
 258
 259 2001-01-11  Peter Targett  <peter.targett@arccores.com>
 260
 261         * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
 262         * Makefile.am (C_FILES): Add arc-ext.c.
 263         (ALL_MACHINES) Add arc-ext.lo.
 264         (INCLUDES) Add opcode directory to list.
 265         New dependency entry for arc-ext.lo.
 266         * disassemble.c (disassembler): Correct call to
 267         arc_get_disassembler.
 268         * arc-opc.c: New update for ARC, including full base
 269         instructions for ARC variants.
 270         * arc-dis.h, arc-dis.c: New update for ARC, including
 271         extensibility functionality.
 272         * arc-ext.h, arc-ext.c: New files for handling extensibility.
 273
 274 2001-01-10  Jan Hubicka  <jh@suse.cz>
 275
 276         * i386-dis.c (PREGRP15 - PREGRP24): New.
 277         (dis386_twobyt): Add SSE2 instructions.
 278         (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
 279         (twobyte_uses_f3_prefix): ... this one.
 280         (grps): Add SSE instructions.
 281         (prefix_user_table): Add two new slots; add SSE2 instructions.
 282         (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
 283         Handle the REPNZ and Data16 prefixes as well; do proper lookup
 284         to prefix_user_table.
 285         (OP_E): Accept mfence and lfence as well.
 286         (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
 287         (OP_XMM): Support REX extensions.
 288         (OP_EM): Likewise.
 289         (OP_EX): Likewise.
 290
 291 2001-01-09  Nick Clifton  <nickc@redhat.com>
 292
 293         * arm-dis.c (print_insn): Set pc to zero for instructions with
 294         a reloc associated with them.
 295
 296 2001-01-09  Jeff Johnston  <jjohnstn@redhat.com>
 297
 298         * cgen-asm.in (parse_insn_normal): Changed syn to be
 299         CGEN_SYNTAX_CHAR_TYPE.  Changed all references to *syn
 300         as character to use CGEN_SYNTAX_CHAR macro and all comparisons
 301         to '\0' to use 0 instead.
 302         * cgen-dis.in (print_insn_normal): Ditto.
 303         * cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
 304
 305 2001-01-05  Jan Hubicka  <jh@suse.cz>
 306
 307         * i386-dis.c: Add x86_64 support.
 308         (rex): New static variable.
 309         (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
 310         (USED_REX): New macro.
 311         (Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
 312         (OP_I64, OP_OFF64, OP_IMREG): New functions.
 313         (OP_REG, OP_OFF): Declare.
 314         (get64, get32, get32s): New functions.
 315         (r??_reg): New constants.
 316         (dis386_att): Change templates of instruction implicitly promoted
 317         to 64bit; change e?? to RMe?? for unwind RM byte instructions.
 318         (grps): Likewise.
 319         (dis386_intel): Likewise.
 320         (dixx86_64_att): New table based on dis386_att.
 321         (dixx86_64_intel): New table based on dis386_intel.
 322         (names64, names8rex): New global variable.
 323         (names32, names16): Add extended registers.
 324         (prefix_user_t): Recognize rex prefixes.
 325         (prefix_name): Print REX prefixes nicely.
 326         (op_riprel): New global variable.
 327         (start_pc): Set type to bfd_vma.
 328         (print_insn_i386): Detect the 64bit mode and use proper table;
 329         move ckprefix after initializing the buffer; output unused rex prefixes;
 330         output information about target of RIP relative addresses.
 331         (putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
 332         (print_operand_value): New function.
 333         (OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
 334         REX prefix and new modes.
 335         (get64, get32s): New.
 336         (get32): Return bfd_signed_vma type.
 337         (set_op): Initialize the op_riprel.
 338         * disassemble.c (disassembler): Recognize the x86-64 disassembly.
 339
 340 2001-01-03  Richard Sandiford  <r.sandiford@redhat.com>
 341
 342          cgen-dis.in (read_insn): Use bfd_get_bits()
 343
 344 2001-01-02  Richard Sandiford  <rsandifo@redhat.com>
 345
 346         * cgen-dis.c (hash_insn_array): Use bfd_put_bits().
 347         (hash_insn_list): Likewise
 348         * cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
 349         (extract_1): Use bfd_get_bits().
 350         (extract_normal): Apply sign extension to both extraction
 351         methods.
 352         * cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
 353         (cgen_put_insn_value): Use bfd_put_bits()
 354
 355 2000-12-28  Frank Ch. Eigler  <fche@redhat.com>
 356
 357         * cgen-asm.in (parse_insn_normal): Print better error message for
 358         instructions with missing operands.
 359
 360 2000-12-21  Santeri Paavolainen <santtu@ssh.com>
 361
 362         * cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.
 363
 364 2000-12-16  Nick Clifton  <nickc@redhat.com>
 365
 366         * Makefile.in: Regenerate.
 367         * aclocal.m4: Regenerate.
 368         * config.in: Regenerate.
 369         * configure.in: Add spacing.
 370         * configure: Regenerate.
 371         * ia64-asmtab.c: Regenerate.
 372         * po/opcodes.pot: Regenerate.
 373
 374 2000-12-12  Frank Ch. Eigler  <fche@redhat.com>
 375
 376         * cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
 377         error messages over later parse-time ones.
 378
 379 2000-12-12  Jim Wilson  <wilson@redhat.com>
 380
 381         * ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
 382         argument.
 383         * ia64-gen.c (insert_deplist): Cast sizeof result to int.
 384         (print_dependency_table): Print NULL if semantics field not set.
 385         (insert_opcode_dependencies): Mark cmp parameter as unused.
 386         (print_main_table): Use fprintf_vma to print long long fields.
 387         (main): Mark argv paramter as unused.  Convert to old style definition.
 388         * ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
 389         * ia64-asmtab.c: Regnerate.
 390
 391 2000-12-09  Nick Clifton  <nickc@redhat.com>
 392
 393         * m32r-dis.c (print_insn): Prevent re-read of instruction from
 394         wrong address.
 395
 396         * fr30-dis.c: Regenerate.
 397
 398 2000-12-08  Peter Targett  <peter.targett@arccores.com>
 399
 400         * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
 401         * Makefile.am (C_FILES): Add arc-ext.c.
 402         (ALL_MACHINES) Add arc-ext.lo.
 403         (INCLUDES) Add opcode directory to list.
 404         New dependency entry for arc-ext.lo.
 405         * disassemble.c (disassembler): Correct call to
 406         arc_get_disassembler.
 407         * arc-opc.c: New update for ARC, including full base
 408         instructions for ARC variants.
 409         * arc-dis.h, arc-dis.c: New update for ARC, including
 410         extensibility functionality.
 411         * arc-ext.h, arc-ext.c: New files for handling extensibility.
 412
 413 2000-12-03  Chris Demetriou   cgd@sibyte.com
 414
 415         * mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
 416         MOD_HILO, and MOD_LO macros.
 417
 418         * mips-opc.c (M1, M2): Delete.
 419         (mips_builtin_opcodes): Remove all uses of M1.
 420
 421         * mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
 422         instructions take "G" format second operands and use the
 423         correct flags.
 424         There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
 425         match.
 426         Delete "sel" code operands from mfc1 and mtc1.
 427         Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
 428         for dm[ft]c[023].
 429
 430 2000-12-03  Ed Satterthwaite  ehs@sibyte.com  and
 431             Chris Demetriou   cgd@sibyte.com
 432
 433         * mips-opc.c (mips_builtin_opcodes): Finish additions
 434         for MIPS32 support, and clean up existing entries for
 435         aesthetics, consistency with the MIPS32 ISA, and
 436         with consistency the rest of the table.
 437
 438 2000-12-01  Nick Clifton  <nickc@redhat.com>
 439
 440         * mips16-opc.c (mips16_opcodes): Add initialiser for membership
 441         field.
 442
 443 2000-12-01  Chris Demetriou <cgd@sibyte.com>
 444
 445         mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
 446         specifiers.  Update 'B' for new constant names, and remove
 447         'm'.
 448         mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
 449         near the top of the array, so they are disassembled properly.
 450         Enable "ssnop" for MIPS32.  Add "break" variant with 20 bit
 451         code for MIPS32.  Update "clo" and "clz" to use 'U' operand
 452         specifier.  Add 'H' format specifier variants for "mfc1,"
 453         "mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32.  Update
 454         MIPS32 "sdbbp" to use 'B' operand specifier.  Add MIPS32
 455         "wait" variant which uses 'J' operand specifier.
 456
 457         * mips-dis.c (set_mips_isa_type): Update to use
 458         CPU_UNKNOWN and ISA_* constants.  Add bfd_mach_mips32 case.
 459         Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
 460         * mips-opc.c (I32): New constant for instructions added in
 461         MIPS32.
 462         (P4): Delete.
 463         (mips_builtin_opcodes) Replace all uses of P4 with I32.
 464
 465         * mips-dis.c (set_mips_isa_type): Add cases for
 466         bfd_mach_mips5 and bfd_mach_mips64.
 467         * mips-opc.c (I64): New definitions.
 468
 469         * mips-dis.c (set_mips_isa_type): Add case for
 470         bfd_mach_mips_sb1.
 471
 472 2000-11-28  Hans-Peter Nilsson  <hp@bitrange.com>
 473
 474         * sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
 475         (print_insn_ppi): Make nib1, nib2, nib3 unsigned.
 476         Initialize variable dc to NULL.
 477         (print_insn_shx): Remove unused label d_reg_n.
 478
 479 2000-11-24  Nick Clifton  <nickc@redhat.com>
 480
 481         * arm-opc.h: Add new opcode formatting parameter 'B'.
 482         (arm_opcodes): Add XScale, v5, and v5te instructions.
 483         (thumb_opcodes): Add v5t instructions.
 484
 485         * arm-dis.c (print_insn_arm): Handle new 'B' format
 486         parameter.
 487         (print_insn_thumb): Decode BLX(1) instruction.
 488
 489 2000-11-21  Chris Demetriou  <cgd@sibyte.com>
 490
 491         * mips-opc.c: Fix file header comment.
 492
 493 2000-11-14  Hans-Peter Nilsson  <hp@axis.com>
 494
 495         * cris-dis.c (cris_get_disassembler): If abfd is NULL, return
 496         print_insn_cris_with_register_prefix.
 497
 498 2000-11-11  Alexandre Oliva  <aoliva@redhat.com>
 499
 500         * sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.
 501
 502 2000-11-07  Matthew Green  <mrg@redhat.com>
 503
 504         * cgen-dis.in (print_insn): All insns which can fit into insn_value
 505         must be loaded there in their entirety.
 506
 507 2000-10-20  Jakub Jelinek  <jakub@redhat.com>
 508
 509         * sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
 510         (compute_arch_mask): Add v8plusb and v9b machines.
 511         (print_insn_sparc): siam mode decoding, accept ASRs up to 25.
 512         * sparc-opc.c: Support for Cheetah instruction set.
 513         (prefetch_table): Add #invalidate.
 514
 515 2000-10-16  Nick Clifton  <nickc@redhat.com>
 516
 517         * mcore-dis.c (imsk): Change mask for OC to 0xFE00.
 518
 519 2000-10-06  Dave Brolley  <brolley@redhat.com>
 520
 521         * fr30-desc.h: Regenerate.
 522         * m32r-desc.h: Regenerate.
 523         * m32r-ibld.c: Regenerate.
 524
 525 2000-10-05  Jim Wilson  <wilson@redhat.com>
 526
 527         * ia64-ic.tbl: Update from Intel.
 528         * ia64-asmtab.c: Regenerate.
 529
 530 2000-10-04  Kazu Hirata  <kazu@hxi.com>
 531
 532         * ia64-gen.c: Convert C++-style comments to C-style comments.
 533         * tic54x-dis.c: Likewise.
 534
 535 2000-09-29  Hans-Peter Nilsson  <hp@axis.com>
 536
 537         Changes to add dollar prefix to registers for files where user symbols
 538         don't have a leading underscore.  Fix formatting.
 539         * cris-dis.c (REGISTER_PREFIX_CHAR): New.
 540         (format_reg): Add parameter with_reg_prefix.  All callers changed.
 541         (print_with_operands): Ditto.
 542         (print_insn_cris_generic): Renamed from print_insn_cris, add
 543         parameter with_reg_prefix.
 544         (print_insn_cris_with_register_prefix,
 545         print_insn_cris_without_register_prefix, cris_get_disassembler):
 546         New.
 547         * disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
 548
 549 2000-09-22  Jim Wilson  <wilson@redhat.com>
 550
 551         * ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
 552         gt, ge, ngt, and nge.
 553         * ia64-asmtab.c: Regenerate.
 554
 555         * ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
 556         * ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
 557         (lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
 558         * ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
 559         * ia64-asmtab.c: Regnerate.
 560
 561 2000-09-13  Anders Norlander  <anorland@acc.umu.se>
 562
 563         * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
 564         Add mfc0 and mtc0 with sub-selection values.
 565         Add clo and clz opcodes.
 566         Add msub and msubu instructions for MIPS32.
 567         Add madd/maddu aliases for mad/madu for MIPS32.
 568         Support wait, deret, eret, movn, pref for MIPS32.
 569         Support tlbp, tlbr, tlbwi, tlbwr.
 570         (P4): New define.
 571
 572         * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
 573         (print_insn_arg): Handle 'H' args.
 574         (set_mips_isa_type): Recognize 4K.
 575         Use CPU_* defines instead of hardcoded numbers.
 576
 577 2000-09-11  Catherine Moore <clm@redhat.com>
 578
 579         * d30v-opc.c (d30v_operand_t): New operand type Rb2.
 580         (d30v_format_tab): Use Rb2 for modinc and moddec.
 581
 582 2000-09-07  Catherine Moore  <clm@redhat.com>
 583
 584         * d30v-opc.c (d30v_format_tab): Use format Ra for
 585         modinc and moddec.
 586
 587 2000-09-06  Alexandre Oliva  <aoliva@redhat.com>
 588
 589         * configure: Rebuilt with new libtool.m4.
 590
 591 2000-09-05  Nick Clifton  <nickc@redhat.com>
 592
 593         * configure: Regenerate.
 594         * po/opcodes.pot: Regenerate.
 595
 596 2000-08-31  Alexandre Oliva  <aoliva@redhat.com>
 597
 598         * acinclude.m4: Include libtool and gettext macros from the
 599         top level.
 600         * aclocal.m4, configure: Rebuilt.
 601
 602 2000-08-30  Kazu Hirata  <kazu@hxi.com>
 603
 604         * tic80-dis.c: Fix formatting.
 605
 606 2000-08-29  Kazu Hirata  <kazu@hxi.com>
 607
 608         * w65-dis.c: Fix formatting.
 609
 610 2000-08-28  Mark Hatle  <mhatle@mvista.com>
 611
 612         * ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
 613         (powerpc_opcodes): Add table entries for PPC 405 instructions.
 614         Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
 615         instructions.  Added extended mnemonic mftbl as defined in the
 616         405GP manual for all PPCs.
 617
 618 2000-08-28  Jim Wilson  <wilson@redhat.com>
 619
 620         * ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
 621         call.  Change last goto to use failed instead of done.
 622
 623 2000-08-28  Dave Brolley  <brolley@redhat.com>
 624
 625         * cgen-ibld.in (cgen_put_insn_int_value): New function.
 626         (insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
 627         (insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
 628         (extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
 629         * cgen-dis.in (read_insn): New static function.
 630         (print_insn): Use read_insn to read the insn into the buffer and set
 631         up for disassembly.
 632         (print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
 633         in the buffer.
 634         * fr30-asm.c: Regenerated.
 635         * fr30-desc.c: Regenerated.
 636         * fr30-desc.h: Regenerated.
 637         * fr30-dis.c: Regenerated.
 638         * fr30-ibld.c: Regenerated.
 639         * fr30-opc.c: Regenerated.
 640         * fr30-opc.h: Regenerated.
 641         * m32r-asm.c: Regenerated.
 642         * m32r-desc.c: Regenerated.
 643         * m32r-desc.h: Regenerated.
 644         * m32r-dis.c: Regenerated.
 645         * m32r-ibld.c: Regenerated.
 646         * m32r-opc.c: Regenerated.
 647
 648 2000-08-28  Kazu Hirata  <kazu@hxi.com>
 649
 650         * tic30-dis.c: Fix formatting.
 651
 652 2000-08-27  Kazu Hirata  <kazu@hxi.com>
 653
 654         * sh-dis.c: Fix formatting.
 655
 656 2000-08-24  David Edelsohn  <dje@watson.ibm.com>
 657
 658         * ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.
 659
 660 2000-08-24  Kazu Hirata  <kazu@hxi.com>
 661
 662         * z8k-dis.c: Fix formatting.
 663
 664 2000-08-16  Jim Wilson  <wilson@redhat.com>
 665
 666         * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds.  Delete
 667         break, mov-immediate, nop.
 668         * ia64-opc-f.c: Delete fpsub instructions.
 669         * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
 670         address operand.  Rewrite using macros to avoid long lines.
 671         * ia64-opc.h (POSTINC): Define.
 672         * ia64-asmtab.c: Regenerate.
 673
 674 2000-08-15  Jim Wilson  <wilson@redhat.com>
 675
 676         * ia64-ic.tbl: Add missing entries.
 677
 678 2000-08-08  Jason Eckhardt  <jle@redhat.com>
 679
 680         * i860-dis.c (print_br_address): Change third argument from int
 681         to long.
 682
 683 2000-08-07  Richard Henderson  <rth@redhat.com>
 684
 685         * ia64-dis.c (print_insn_ia64): Get byte skip count correct
 686         for MLI templates.  Handle IA64_OPND_TGT64.
 687
 688 2000-08-04  Ben Elliston  <bje@redhat.com>
 689
 690         * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
 691         * cgen.sh: Likewise.
 692
 693 2000-08-02  Jim Wilson  <wilson@redhat.com>
 694
 695         * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
 696
 697 2000-07-29  Marek Michalkiewicz  <marekm@linux.org.pl>
 698
 699         * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
 700         Change return type from void to int.  Check the combination
 701         of operands, return 1 if valid.  Fix to avoid BUF overflow.
 702         Report undefined combinations of operands in COMMENT.
 703         Report internal errors to stderr.  Output the adiw/sbiw
 704         constant operand in both decimal and hex.
 705         (print_insn_avr): Disassemble ldd/std with displacement of 0
 706         as ld/st.  Check avr_operand () return value, handle invalid
 707         combinations of operands like unknown opcodes.
 708
 709 2000-07-28  Ben Elliston  <bje@redhat.com>
 710
 711         * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
 712         (run-cgen, stamp-m32r, stamp-fr30): New targets.
 713         * Makefile.in: Regenerate.
 714         * configure.in: Add --enable-cgen-maint option.
 715         * configure: Regenerate.
 716
 717 2000-07-26  Dave Brolley  <brolley@redhat.com>
 718
 719         * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
 720         (cgen_hw_lookup_by_num): Ditto.
 721         (cgen_operand_lookup_by_name): Ditto.
 722         (print_address): Ditto.
 723         (print_keyword): Ditto.
 724         * cgen-dis.c (hash_insn_array): Mark unused parameters with
 725         ATTRIBUTE_UNUSED.
 726         * cgen-asm.c (hash_insn_array): Mark unused parameters with
 727         ATTRIBUTE_UNUSED.
 728         (cgen_parse_keyword): Ditto.
 729
 730 2000-07-22  Jason Eckhardt  <jle@redhat.com>
 731
 732         * i860-dis.c: New file.
 733         (print_insn_i860): New function.
 734         (print_br_address): New function.
 735         (sign_extend): New function.
 736         (BITWISE_OP): New macro.
 737         (I860_REG_PREFIX): New macro.
 738         (grnames, frnames, crnames): New structures.
 739
 740         * disassemble.c (ARCH_i860): Define.
 741         (disassembler): Add check for bfd_arch_i860 to set disassemble
 742         function to print_insn_i860.
 743
 744         * Makefile.in (CFILES): Added i860-dis.c.
 745         (ALL_MACHINES): Added i860-dis.lo.
 746         (i860-dis.lo): New dependences.
 747
 748         * configure.in: New bits for bfd_i860_arch.
 749
 750         * configure: Regenerated.
 751
 752 2000-07-20  Hans-Peter Nilsson  <hp@axis.com>
 753
 754         * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
 755         (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
 756         (cris-dis.lo, cris-opc.lo): New rules.
 757         * Makefile.in: Rebuild.
 758         * configure.in (bfd_cris_arch): New target.
 759         * configure: Rebuild.
 760         * disassemble.c (ARCH_cris): Define.
 761         (disassembler): Support ARCH_cris.
 762         * cris-dis.c, cris-opc.c: New files.
 763         * po/POTFILES.in, po/opcodes.pot: Regenerate.
 764
 765 2000-07-11  Jakub Jelinek  <jakub@redhat.com>
 766
 767         * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
 768         Reported by Bill Clarke <llib@computer.org>.
 769
 770 2000-07-09  Geoffrey Keating  <geoffk@redhat.com>
 771
 772         * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
 773         Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
 774
 775 2000-07-09  Alan Modra  <alan@linuxcare.com.au>
 776
 777         * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
 778         fput_const, extract_3, extract_5_load, extract_5_store,
 779         extract_5r_store, extract_5R_store, extract_10U_store,
 780         extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
 781         extract_12, extract_17, extract_22): Prototype.
 782         (print_insn_hppa): Rename inner block opcode -> opc to avoid
 783         shadowing outer block.
 784         (GET_BIT): Define.
 785
 786 2000-07-05  DJ Delorie  <dj@redhat.com>
 787
 788         * MAINTAINERS: new
 789
 790 2000-07-04  Alexandre Oliva  <aoliva@redhat.com>
 791
 792         * arm-dis.c (print_insn_arm): Output combinations of PSR flags.
 793
 794 2000-07-03  Marek Michalkiewicz  <marekm@linux.org.pl>
 795
 796         * avr-dis.c (avr_operand): Change _ () to _() around all strings
 797         marked for translation (exception from the usual coding style).
 798         (print_insn_avr): Initialize insn2 to avoid warnings.
 799
 800 2000-07-03  Kazu Hirata  <kazu@hxi.com>
 801
 802         * h8300-dis.c (bfd_h8_disassemble): Improve readability.
 803         * h8500-dis.c: Fix formatting.
 804
 805 2000-07-01  Alan Modra  <alan@linuxcare.com.au>
 806
 807         * Makefile.am (DEP): Fix 2000-06-22.  grep after running dep.sed
 808         (CLEANFILES): Add DEPA.
 809         * Makefile.in: Regenerate.
 810
 811 2000-06-26  Scott Bambrough  <scottb@netwinder.org>
 812
 813         * arm-dis.c (regnames): Add an additional register set to match
 814         the set used by GCC.  Make it the default.
 815
 816 2000-06-22  Alan Modra  <alan@linuxcare.com.au>
 817
 818         * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
 819         find one.
 820         * Makefile.in: Regenerate.
 821
 822 2000-06-20  H.J. Lu  <hjl@gnu.org>
 823
 824         * Makefile.am: Rebuild dependency.
 825         * Makefile.in: Rebuild.
 826
 827 2000-06-18  Stephane Carrez  <stcarrez@worldnet.fr>
 828
 829         * Makefile.in, configure: regenerate
 830         * disassemble.c (disassembler): Recognize ARCH_m68hc12,
 831         ARCH_m68hc11.
 832         * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
 833         New functions.
 834         * configure.in: Recognize m68hc12 and m68hc11.
 835         * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
 836         * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
 837         and opcode generation for m68hc11 and m68hc12.
 838
 839 2000-06-16  Nick Duffek  <nsd@redhat.com>
 840
 841         * disassemble.c (disassembler): Refer to the PowerPC 620 using
 842         bfd_mach_ppc_620 instead of 620.
 843
 844 2000-06-12  Kazu Hirata  <kazu@hxi.com>
 845
 846         * h8300-dis.c: Fix formatting.
 847         (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
 848         correctly.
 849
 850 2000-06-09  Denis Chertykov  <denisc@overta.ru>
 851
 852         * avr-dis.c (avr_operand): Bugfix for jmp/call address.
 853
 854 2000-06-07  Denis Chertykov  <denisc@overta.ru>
 855
 856         * avr-dis.c: completely rewritten.
 857
 858 2000-06-02  Kazu Hirata  <kazu@hxi.com>
 859
 860         * h8300-dis.c: Follow the GNU coding style.
 861         (bfd_h8_disassemble) Fix a typo.
 862
 863 2000-06-01  Kazu Hirata  <kazu@hxi.com>
 864
 865         * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
 866         (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
 867         correctly.  Fix a typo.
 868
 869 2000-05-31  Nick Clifton  <nickc@redhat.com>
 870
 871         * opintl.h (_(String)): Explain why dgettext is used instead of
 872         gettext.
 873
 874 2000-05-30  Nick Clifton  <nickc@redhat.com>
 875
 876         * opintl.h (gettext, dgettext, dcgettext, textdomain,
 877         bindtextdomain): Replace defines with those from intl/libgettext.h
 878         to quieten gcc warnings.
 879
 880 2000-05-26  Alan Modra  <alan@linuxcare.com.au>
 881
 882         * Makefile.am: Update dependencies with "make dep-am"
 883         * Makefile.in: Regenerate.
 884
 885 2000-05-25  Alexandre Oliva  <aoliva@redhat.com>
 886
 887         * m10300-dis.c (disassemble): Don't assume 32-bit longs when
 888         sign-extending operands.
 889
 890 2000-05-15  Donald Lindsay  <dlindsay@redhat.com>
 891
 892         * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
 893         except brf's.
 894
 895 2000-05-21  Nick Clifton  <nickc@redhat.com>
 896
 897         * Makefile.am (LIBIBERTY): Define.
 898
 899 2000-05-19 Diego Novillo <dnovillo@redhat.com>
 900
 901         * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
 902         (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
 903         (reg_names): Rename to std_reg_names. Change it to a char **
 904         static variable.
 905         (std_reg_names): New name for reg_names.
 906         (set_mips_isa_type): Set reg_names to point to std_reg_names by
 907         default.
 908
 909 2000-05-16  Frank Ch. Eigler  <fche@redhat.com>
 910
 911         * fr30-desc.h: Partially regenerated to account for changed
 912         CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
 913         * m32r-desc.h: Ditto.
 914
 915 2000-05-15  Nick Clifton  <nickc@redhat.com>
 916
 917         * arm-opc.h: Use upper case for flasg in MSR and MRS
 918         instructions.  Allow any bit to be set in the field_mask of
 919         the MSR instruction.
 920
 921         * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
 922         field_mask of an MSR instruction.
 923
 924 2000-05-11  Thomas de Lellis  <tdel@windriver.com>
 925
 926         * arm-opc.h: Disassembly of thumb ldsb/ldsh
 927         instructions changed to ldrsb/ldrsh.
 928
 929 2000-05-11  Ulf Carlsson  <ulfc@engr.sgi.com>
 930
 931         * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
 932         target addresses for 'jal' and 'j'.
 933
 934 2000-05-10  Geoff Keating  <geoffk@redhat.com>
 935
 936         * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
 937         also available in common mode when powerpc syntax is being used.
 938
 939 2000-05-08  Alan Modra  <alan@linuxcare.com.au>
 940
 941         * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
 942         (dummy_print_address): Ditto.
 943
 944 2000-05-04  Timothy Wall  <twall@redhat.com>
 945
 946         * tic54x-opc.c: New.
 947         * tic54x-dis.c: New.
 948         * disassemble.c (disassembler): Add ARCH_tic54x.
 949         * configure.in: Added tic54x target.
 950         * configure: Ditto.
 951         * Makefile.am: Add tic54x dependencies.
 952         * Makefile.in: Ditto.
 953
 954 2000-05-03  J.T. Conklin  <jtc@redback.com>
 955
 956         * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
 957         vector unit operands.
 958         (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
 959         unit instruction formats.
 960         (PPCVEC): New macro, mask for vector instructions.
 961         (powerpc_operands): Add table entries for above operand types.
 962         (powerpc_opcodes): Add table entries for vector instructions.
 963
 964         * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
 965         (print_insn_little_powerpc): Likewise.
 966         (print_insn_powerpc): Prepend 'v' when printing vector registers.
 967
 968 2000-04-24  Clinton Popetz  <cpopetz@redhat.com>
 969
 970         * configure.in: Add bfd_powerpc_64_arch.
 971         * disassemble.c (disassembler): Use print_insn_big_powerpc for
 972         64 bit code.
 973
 974 2000-04-24  Nick Clifton  <nickc@redhat.com>
 975
 976         * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
 977         field.
 978
 979 2000-04-23  Denis Chertykov  <denisc@overta.ru>
 980
 981         * avr-dis.c (reg_fmul_d): New. Extract destination register from
 982         FMUL instruction.
 983         (reg_fmul_r): New. Extract source register from FMUL instruction.
 984         (reg_muls_d): New. Extract destination register from MULS instruction.
 985         (reg_muls_r): New. Extract source register from MULS instruction.
 986         (reg_movw_d): New. Extract destination register from MOVW instruction.
 987         (reg_movw_r): New. Extract source register from MOVW instruction.
 988         (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
 989         EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
 990
 991 2000-04-22  Timothy Wall  <twall@redhat.com>
 992
 993         * ia64-gen.c (general): Add an ordered table of primary
 994         opcode names, as well as priority fields to disassembly data
 995         structures to enforce a preferred disassembly format based on the
 996         ordering of the opcode tables.
 997         (load_insn_classes): Show a useful message if IC tables are missing.
 998         (load_depfile): Ditto.
 999         * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
1000         distinguish preferred disassembly.
1001         * ia64-opc-f.c: Reorder some insn for preferred disassembly
1002         format.  Fix incorrect flag on fma.s/fma.s.s0.
1003         * ia64-opc.c: Scan *all* disassembly matches and use the one with
1004         the highest priority.
1005         * ia64-opc-b.c: Use more abbreviations.
1006         * ia64-asmtab.c: Regenerate.
1007
1008 2000-04-21  Jason Eckhardt  <jle@redhat.com>
1009
1010         * hppa-dis.c (extract_16): New function.
1011         (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
1012         new operand types l,y,&,fe,fE,fx.
1013
1014 2000-04-21  Richard Henderson  <rth@redhat.com>
1015             David Mosberger  <davidm@hpl.hp.com>
1016             Timothy Wall <twall@redhat.com>
1017             Bob Manson  <manson@charmed.cygnus.com>
1018             Jim Wilson  <wilson@redhat.com>
1019
1020         * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
1021         (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
1022         ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
1023         ia64-asmtab.c.
1024         (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
1025         (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
1026         ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
1027         * Makefile.in: Rebuild.
1028         * configure Rebuild.
1029         * configure.in (bfd_ia64_arch): New target.
1030         * disassemble.c (ARCH_ia64): Define.
1031         (disassembler): Support ARCH_ia64.
1032         * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
1033         ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
1034         ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
1035         ia64-war.tbl, ia64-waw.tbl: New files.
1036
1037 2000-04-20  Alexandre Oliva  <aoliva@redhat.com>
1038
1039         * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
1040         (disassemble): Use them.
1041
1042 2000-04-14  Alan Modra  <alan@linuxcare.com.au>
1043
1044         * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
1045         * Makefile.am: Update dependencies.
1046         * Makefile.in: Regenerate.
1047
1048 2000-04-14  Michael Sokolov  <msokolov@ivan.Harhan.ORG>
1049
1050         * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
1051         avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
1052         disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
1053         i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
1054         m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
1055         mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
1056         ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
1057         tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
1058         w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h.  Remove
1059         ansidecl.h as sysdep.h includes it.
1060
1061 2000-04-7  Andrew Cagney  <cagney@b1.redhat.com>
1062
1063         * configure.in (WARN_CFLAGS): Set to -W -Wall by default.  Add
1064         --enable-build-warnings option.
1065         * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
1066         * Makefile.in, configure: Re-generate.
1067
1068 2000-04-05  J"orn Rennecke <amylaar@redhat.com>
1069
1070         * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
1071         stc GBR,@-<REG_N> is available for arch_sh1_up.
1072         Group parallel processing insn with identical mnemonics together.
1073         Make three-operand psha / pshl come first.
1074
1075 2000-04-05  J"orn Rennecke <amylaar@redhat.co.uk>
1076
1077         * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
1078         Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}.  Add REPEAT.
1079         (sh_arg_type): Add A_PC.
1080         (sh_table): Update entries using immediates.  Add repeat.
1081         * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
1082         Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}.  Add REPEAT.
1083
1084 2000-04-04  Alan Modra  <alan@linuxcare.com.au>
1085
1086         * po/opcodes.pot: Regenerate.
1087
1088         * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
1089         (DEP): Quote when passing vars to sub-make.  Add warning message
1090         to end.
1091         (DEP1): Rewrite for "gcc -MM".
1092         (CLEANFILES): Add DEP2.
1093         Update dependencies.
1094         * Makefile.in: Regenerate.
1095
1096 2000-04-03  Denis Chertykov  <denisc@overta.ru>
1097
1098         * avr-dis.c: Syntax cleanup.
1099         (add0fff): Print the pc relative address as a signed number.
1100         (add03f8): Likewise.
1101
1102 2000-04-01  Ian Lance Taylor  <ian@zembu.com>
1103
1104         * disassemble.c (disassembler_usage): Don't use a prototype.  Mark
1105         the parameter ATTRIBUTE_UNUSED.
1106         * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
1107
1108 2000-04-01  Alexandre Oliva  <aoliva@redhat.com>
1109
1110         * m10300-opc.c: SP-based offsets are always unsigned.
1111
1112 2000-03-29  Thomas de Lellis  <tdel@windriver.com>
1113
1114         * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
1115         [branch always] instead of "undefined".
1116
1117 2000-03-27  Nick Clifton  <nickc@redhat.com>
1118
1119         * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
1120         short instructions, from end of list of long instructions.
1121
1122 2000-03-27  Ian Lance Taylor  <ian@zembu.com>
1123
1124         * Makefile.am (CFILES): Add avr-dis.c.
1125         (ALL_MACHINES): Add avr-dis.lo.
1126
1127 2000-03-27  Alan Modra  <alan@linuxcare.com>
1128
1129         * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
1130         truncate integers.
1131         (print_insn_avr): Call function via pointer in K&R compatible way.
1132         (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
1133         add0fff, add03f8): Convert to old style function declaration and
1134         add prototype.
1135         (avrdis_opcode): Add prototype.
1136
1137 2000-03-27  Denis Chertykov  <denisc@overta.ru>
1138
1139         * avr-dis.c: New file.  AVR disassembler.
1140         * configure.in (bfd_avr_arch): New architecture support.
1141         * disassemble.c: Likewise.
1142         * configure: Regenerate.
1143
1144 2000-03-06  J"oern Rennecke <amylaar@redhat.com>
1145
1146         * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
1147
1148 2000-03-02  J"orn Rennecke <amylaar@redhat.co.uk>
1149
1150         * d30v-dis.c (print_insn): Remove d*i hacks.  Use per-operand
1151         flag to determine if operand is pc-relative.
1152         * d30v-opc.c:
1153         (d30v_format_table):
1154         (REL6S3): Renamed from IMM6S3.
1155         Added flag OPERAND_PCREL.
1156         (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
1157         added flag OPERAND_PCREL.
1158         (IMM12S3U): Replaced with REL12S3.
1159         (SHORT_D2, LONG_D): Delay target is pc-relative.
1160         (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
1161         Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
1162         using the REL* operands.
1163         (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
1164         (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
1165         LONG_Db, using REL* operands.
1166         (SHORT_U, SHORT_A5S): Removed stray alternatives.
1167         (d30v_opcode_table): Use new *r formats.
1168
1169 2000-02-28  Nick Clifton  <nickc@redhat.com>
1170
1171         * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
1172         'signed_overflow_ok_p'.
1173
1174 2000-02-27  Eli Zaretskii  <eliz@is.elta.co.il>
1175
1176         * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
1177         name of the libtool directory.
1178         * Makefile.in: Rebuild.
1179
1180 2000-02-24  Nick Clifton  <nickc@redhat.com>
1181
1182         * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
1183         (cgen_clear_signed_overflow_ok): New function.
1184         (cgen_signed_overflow_ok_p): New function.
1185
1186 2000-02-23  Andrew Haley  <aph@redhat.com>
1187
1188         * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
1189         m32r-ibld.c, m32r-opc.h: Rebuild.
1190
1191 2000-02-23  Linas Vepstas <linas@linas.org>
1192
1193         * i370-dis.c, i370-opc.c: New.
1194
1195         * disassemble.c (ARCH_i370): Define.
1196         (disassembler): Handle it.
1197
1198         * Makefile.am: Add support for Linux/IBM 370.
1199         * configure.in: Likewise.
1200
1201         * Makefile.in: Regenerate.
1202         * configure: Likewise.
1203
1204 2000-02-22  Chandra Chavva   <cchavva@redhat.com>
1205
1206         * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
1207         ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
1208         procedure.
1209
1210 2000-02-22  Andrew Haley  <aph@redhat.com>
1211
1212         * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
1213         force gp32 to zero.
1214         * mips-opc.c (G6): New define.
1215         (mips_builtin_op): Add "move" definition for -gp32.
1216
1217 2000-02-22  Ian Lance Taylor  <ian@zembu.com>
1218
1219         From Grant Erickson <gerickso@Brocade.COM>:
1220         * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
1221
1222 2000-02-21  Alan Modra  <alan@spri.levels.unisa.edu.au>
1223
1224         * dis-buf.c (buffer_read_memory): Change `length' param and all int
1225         vars to unsigned.
1226
1227 2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
1228
1229         * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
1230         (print_insn_ppi): Likewise.
1231         (print_insn_shx): Use info->mach to select appropriate insn set.
1232         Add support for sh-dsp.  Remove FD_REG_N support.
1233         * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
1234         (sh_arg_type): Likewise.  Remove FD_REG_N.
1235         (sh_dsp_reg_nums): New enum.
1236         (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
1237         (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
1238         (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
1239         (arch_sh3_dsp_up): Likewise.
1240         (sh_opcode_info): New field: arch.
1241         (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
1242         D_REG_N.  Fill in arch field.  Add sh-dsp insns.
1243
1244 2000-02-14  Fernando Nasser  <fnasser@totem.to.redhat.com>
1245
1246         * arm-dis.c: Change flavor name from atpcs-special to
1247         special-atpcs to prevent name conflict in gdb.
1248         (get_arm_regname_num_options, set_arm_regname_option,
1249         get_arm_regnames): New functions.  API to access the several
1250         flavor of register names.  Note: Used by gdb.
1251         (print_insn_thumb): Use the register name entry from the currently
1252         selected flavor for LR and PC.
1253
1254 2000-02-10  Nick Clifton  <nickc@redhat.com>
1255
1256         * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
1257         classes.
1258         (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
1259         "mulsh.h" instructions.
1260         * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
1261         classes.
1262         (print_insn_mcore): Add support for little endian targets.
1263         Add support for MULSH and OPSR classes.
1264
1265 2000-02-07  Nick Clifton  <nickc@redhat.com>
1266
1267         * arm-dis.c (parse_arm_diassembler_option): Rename again.
1268         Previous delat did not take.
1269
1270 2000-02-03  Timothy Wall  <twall@redhat.com>
1271
1272         * dis-buf.c (buffer_read_memory):  Use octets_per_byte field
1273         to adjust target address bounds checking and calculate the
1274         appropriate octet offset into data.
1275
1276 2000-01-27  Nick Clifton  <nickc@redhat.com>
1277
1278         * arm-dis.c: (parse_disassembler_option): Rename to
1279         parse_arm_disassembler_option and allow to be exported.
1280
1281         * disassemble.c (disassembler_usage): New function: Print out any
1282         target specific disassembler options.
1283         Call arm_disassembler_options() if the ARM architecture is being
1284         supported.
1285
1286         * arm-dis.c (NUM_ELEM): Define this macro if not already
1287         defined.
1288         (arm_regname): New struct type for ARM register names.
1289         (arm_toggle_regnames): Delete.
1290         (parse_disassembler_option): Use register name structure.
1291         (print_insn): New function: Combines duplicate code found in
1292         print_insn_big_arm and print_insn_little_arm.
1293         (print_insn_big_arm): Call print_insn.
1294         (print_insn_little_arm): Call print_insn.
1295         (print_arm_disassembler_options): Display list of supported,
1296         ARM specific disassembler options.
1297
1298 2000-01-27  Thomas de Lellis  <tdel@windriver.com>
1299
1300         * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
1301         ARM_STT_16BIT flag as Thumb code symbols.
1302
1303         * arm-dis.c (printf_insn_little_arm): Ditto.
1304
1305 2000-01-25  Thomas de Lellis  <tdel@windriver.com>
1306
1307         * arm-dis.c (printf_insn_thumb): Prevent double dumping
1308         of raw thumb instructions.
1309
1310 2000-01-20  Nick Clifton  <nickc@redhat.com>
1311
1312         * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
1313
1314 2000-01-03  Nick Clifton  <nickc@cygnus.com>
1315
1316         * arm-dis.c (streq): New macro.
1317         (strneq): New macro.
1318         (force_thumb): ew local variable.
1319         (parse_disassembler_option): New function: Parse a single, ARM
1320         specific disassembler command line switch.
1321         (parse_disassembler_option): Call parse_disassembler_option to
1322         parse individual command line switches.
1323         (print_insn_big_arm): Check force_thumb.
1324         (print_insn_little_arm): Check force_thumb.
1325
1326 For older changes see ChangeLog-9899
1327 \f
1328 Local Variables:
1329 mode: change-log
1330 left-margin: 8
1331 fill-column: 74
1332 version-control: never
1333 End: