opcodes/ChangeLog

   1 start-sanitize-fr30
   2 Thu Nov 19 16:02:46 1998  Dave Brolley  <brolley@cygnus.com>
   3
   4         * fr30-opc.c: Regenerated.
   5         * fr30-opc.h: Regenerated.
   6         * fr30-dis.c: Regenerated.
   7         * fr30-asm.c: Regenerated.
   8
   9 end-sanitize-fr30
  10 Thu Nov 19 07:54:15 1998  Doug Evans  <devans@charmed.cygnus.com>
  11
  12         * mips-opc.c (sync.p,sync.l): Swap insn values.
  13
  14 start-sanitize-fr30
  15 1998-11-19  Doug Evans  <devans@tobor.to.cygnus.com>
  16
  17         * fr30-opc.c: Regenerate.
  18
  19 Wed Nov 18 21:36:37 1998  Dave Brolley  <brolley@cygnus.com>
  20
  21         * fr30-opc.c: Regenerated.
  22         * fr30-opc.h: Regenerated.
  23
  24 end-sanitize-fr30
  25 1998-11-18  Doug Evans  <devans@casey.cygnus.com>
  26
  27         * cgen-asm.in (insert_1): Replace calls to bfd_getb8/putb8.
  28         (insert_normal, !CGEN_INT_INSN_P case): Only fetch enough bytes
  29         to hold value.
  30         (insert_insn_normal): Fix typo.
  31         * cgen-dis.c (cgen_dis_lookup_insn): Update type of `value' arg.
  32         * cgen-dis.in (extract_normal): Ditto.  New arg `pc'.
  33         Rewrite ! CGEN_INT_INSN_P case.
  34         (extract_insn_normal): Ditto.
  35         (extract_1): New arg `pc'.  All callers updated.
  36         Replace calls to bfd_getb8.
  37         (fill_cache): New fn.
  38         * cgen-opc.c (cgen_{get,put}_insn_value): Move here ...
  39         * cgen-opc.in: ... from here.
  40         (@arch@_cgen_lookup_insn): Rewrite ! CGEN_INT_INSN_P case.
  41         * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
  42 start-sanitize-fr30
  43         * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
  44 end-sanitize-fr30
  45
  46 start-sanitize-fr30
  47 Wed Nov 18 11:30:04 1998  Dave Brolley  <brolley@cygnus.com>
  48
  49         * fr30-opc.c: Regenerated.
  50
  51 Mon Nov 16 19:21:48 1998  Dave Brolley  <brolley@cygnus.com>
  52
  53         * fr30-opc.c: Regenerated.
  54         * fr30-opc.h: Regenerated.
  55         * fr30-dis.c: Regenerated.
  56         * fr30-asm.c: Regenerated.
  57
  58 Thu Nov 12 19:24:18 1998  Dave Brolley  <brolley@cygnus.com>
  59
  60         * po/opcodes.pot: Regenerated.
  61         * fr30-opc.c: Regenerated.
  62         * fr30-opc.h: Regenerated.
  63         * fr30-dis.c: Regenerated.
  64         * fr30-asm.c: Regenerated.
  65
  66 Tue Nov 10 15:26:27 1998  Nick Clifton  <nickc@cygnus.com>
  67
  68         * disassemble.c (disassembler): Add support for FR30 target.
  69
  70 end-sanitize-fr30
  71 Tue Nov 10 11:00:04 1998  Doug Evans  <devans@canuck.cygnus.com>
  72
  73 start-sanitize-cygnus
  74         * cgen-dis.in (print_normal): CGEN_OPERAND_FAKE renamed to
  75         CGEN_OPERAND_SEM_ONLY.
  76 end-sanitize-cygnus
  77         * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
  78 start-sanitize-fr30
  79         * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
  80
  81 Mon Nov  9 18:22:55 1998  Dave Brolley  <brolley@cygnus.com>
  82
  83         * po/opcodes.pot: Regenerate.
  84         * po/POTFILES.in: Regenerate.
  85         * fr30-opc.c: Regenerate.
  86         * fr30-opc.h: Regenerate.
  87 end-sanitize-fr30
  88 Fri Nov  6 17:21:38 1998  Doug Evans  <devans@canuck.cygnus.com>
  89
  90         * m32r-asm.c: Regenerate.
  91
  92 start-sanitize-fr30
  93 Wed Nov  4 18:46:47 1998  Dave Brolley  <brolley@cygnus.com>
  94
  95         * configure.in: Added case for bfd_fr30_arch.
  96         * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
  97         (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
  98         (CLEANFILES): Added stamp-fr30.
  99         (FR30_DEPS): Added.
 100         * fr30-asm.c: New file.
 101         * fr30-dis.c: New file.
 102         * fr30-opc.c: New file.
 103         * fr30-opc.h: New file.
 104         * po/POTFILES.in: Regenerated
 105         * po/opcodes.pot: Regenerated
 106
 107 end-sanitize-fr30
 108 start-sanitize-m32rx
 109 Mon Nov  2 20:08:03 1998  Doug Evans  <devans@canuck.cygnus.com>
 110
 111         * m32r-opc.c (m32r_cgen_insn_table_entries): Add FILL_SLOT attribute
 112         to bcl8,bncl8 entries.
 113         (macro_insn_table_entries): Add FILL_SLOT attribute
 114         to bcl8r,bncl8r entries.
 115
 116 end-sanitize-m32rx
 117 Mon Nov  2 15:05:33 1998  Geoffrey Noer  <noer@cygnus.com>
 118
 119         * configure.in: detect cygwin* instead of cygwin32*
 120         * configure: regenerate
 121
 122 Tue Oct 27 08:58:37 1998  Gavin Romig-Koch  <gavin@cygnus.com>
 123
 124         * mips-opc.c (IS_M): Added.
 125
 126 start-sanitize-r5900
 127 Fri Oct 23 12:06:00 EDT 1998  Frank Ch. Eigler <fche@cygnus.com>
 128
 129         * mips-opc.c (vrget, vclipw, vrnext): Correct COP2 opcodes
 130         and masks.
 131
 132 end-sanitize-r5900
 133 Mon Oct 19 13:03:19 1998  Doug Evans  <devans@seba.cygnus.com>
 134
 135 start-sanitize-cygnus
 136         * cgen-asm.in (insert_1): New function.
 137         (insert_normal): Progress on handling ! CGEN_INT_INSN_P.
 138         (insert_insn_normal): Update handling of CGEN_INT_INSN_P.
 139         (@arch@_cgen_assemble_insn): Update type of `buf' arg.
 140         * cgen-dis.in (extract_1): New function.
 141         (extract_normal): buf_ctrl renamed to ex_info, update type.
 142         Progress on handling of CGEN_INT_INSN_P.
 143         (extract_insn_normal): buf_ctrl renamed to ex_info, update type.
 144         Update handling of CGEN_INT_INSN_P.  Handle errors from
 145         @arch@_cgen_extract_operand.
 146         (print_insn): Renamed from print_int_insn.  Handle ! CGEN_INT_INSN_P.
 147         (default_print_insn): Renamed from print_insn.
 148         Handle ! CGEN_INT_INSN_P.
 149         (print_insn_@arch@): Handle error returns from print_insn.
 150         * cgen-opc.in (cgen_get_insn_value, cgen_put_insn_value): New fns.
 151         (@arch@_cgen_lookup_insn): Update handling of CGEN_INT_INSN_P.
 152         (@arch@_cgen_lookup_get_insn_operands): Ditto.
 153 end-sanitize-cygnus
 154         * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
 155
 156 start-sanitize-am33
 157 Wed Oct 14 12:12:25 1998  Jeffrey A Law  (law@cygnus.com)
 158
 159         * m10300-opc.c: Allow autoincrement stores using the same register
 160         for source and destination operands.
 161
 162 Mon Oct 12 10:43:51 1998  Jeffrey A Law  (law@cygnus.com)
 163
 164         * m10300-opc.c: DSP instrutions which only write to one general
 165         register have no restrictions on matching operands.
 166
 167         * m10300-opc.c (lsr_add): Fix typo for "lsr_add imm,reg,reg,reg" case.
 168
 169 end-sanitize-am33
 170 Fri Oct  9 14:01:56 1998  Doug Evans  <devans@seba.cygnus.com>
 171
 172         * m32r-opc.h,m32r-opc.c: Regenerate.
 173
 174 start-sanitize-am33
 175 Thu Oct  8 06:04:38 1998  Jeffrey A Law  (law@cygnus.com)
 176
 177         * m10300-opc.c (asr, lsr, asl): Fix am33 single bit shift opcode.
 178
 179 end-sanitize-am33
 180 Sun Oct  4 21:01:44 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>
 181
 182         * i386-dis.c (OP_3DNowSuffix): New static function.
 183         (OPSUF): Define.
 184         (GRP14): Define.
 185         (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
 186         (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
 187         (insn_codep): New static variable.
 188         (print_insn_x86): Init insn_codep after prefixes.
 189         (grps): Add GRP14 entries for prefetch, prefetchw.
 190         (OP_REG): Reformat.
 191
 192         From Jeff B Epler <jepler@usgs.gov>
 193         * i386-dis.c (Suffix3DNow): New table.
 194
 195 Wed Sep 30 10:17:50 1998  Nick Clifton  <nickc@cygnus.com>
 196
 197         * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
 198
 199 Mon Sep 28 14:35:43 1998  Martin M. Hunt  <hunt@cygnus.com>
 200
 201         * d10v-dis.c (print_operand): If num is nonzero, then
 202         add OPERAND_ACC1, not OPERAND_ACC0.
 203
 204 Thu Sep 24 09:20:03 1998  Nick Clifton  <nickc@cygnus.com>
 205
 206         * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
 207         insns.
 208
 209 Tue Sep 22 17:55:14 1998  Nick Clifton  <nickc@cygnus.com>
 210
 211         * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
 212         class.
 213
 214 start-sanitize-sky
 215 Fri Sep 18 16:23:32 1998  Doug Evans  <devans@canuck.cygnus.com>
 216
 217         * dvp-opc.c (gif_opcodes): Support EOP on gifimage.
 218
 219 end-sanitize-sky
 220 Tue Sep 15 15:14:45 1998  Doug Evans  <devans@canuck.cygnus.com>
 221
 222         * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
 223
 224 start-sanitize-nortel-ppc750
 225 1998-09-09  Michael Meissner  <meissner@cygnus.com>
 226
 227         * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
 228         to/from SPRs.
 229
 230 end-sanitize-nortel-ppc750
 231 Fri Sep  4 19:42:59 1998  Nick Clifton  <nickc@cygnus.com>
 232
 233         * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
 234         object files.
 235         (print_insn_little_arm): Detect Thumb symbols in elf object
 236         files.
 237
 238 Sat Aug 29 22:24:09 1998  Richard Henderson  <rth@cygnus.com>
 239
 240         * alpha-dis.c (print_insn_alpha): Use the machine type to
 241         decide which PALcode set to include.
 242
 243 Sun Aug 23 02:16:18 1998  Richard Henderson  <rth@cygnus.com>
 244
 245         * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
 246
 247 Fri Aug 21 16:07:52 1998  Nick Clifton  <nickc@cygnus.com>
 248
 249         * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
 250         MSUB and MSUBS instructions.
 251
 252 start-sanitize-r5900
 253 Tue Aug 18 16:48:52 1998  Ian Lance Taylor  <ian@cygnus.com>
 254
 255         * mips-opc.c: Insert contents of vu0.h, rather than including it.
 256         * vu0.h: Remove.
 257         * Makefile.am: Rebuild dependencies.
 258         * Makefile: Rebuild.
 259
 260 end-sanitize-r5900
 261 Thu Aug 13 16:23:04 1998  Ian Lance Taylor  <ian@cygnus.com>
 262
 263         * ppc-opc.c (powerpc_operands): Omit parens around additions in
 264         operand name macros.
 265
 266 Wed Aug 12 14:00:38 1998  Ian Lance Taylor  <ian@cygnus.com>
 267
 268 start-sanitize-coldfire
 269         * m68k-opc.c: Correct divsl, divul, remsl, and remul for
 270         ColdFire, as below for mulsl and mulul.
 271
 272 end-sanitize-coldfire
 273         From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
 274         * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
 275         +, -, and d for ColdFire.
 276
 277         From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
 278         * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
 279         (extract_mbe): Likewise.
 280
 281 Wed Aug 12 11:11:34 1998  Jeffrey A Law  (law@cygnus.com)
 282
 283         * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
 284
 285         * m10300-opc.c: First cut at UDF instructions.
 286
 287 Mon Aug 10 14:08:22 1998  Doug Evans  <devans@canuck.cygnus.com>
 288
 289         * m32r-opc.c: Regenerate (remove semantic descriptions).
 290
 291 Mon Aug 10 12:51:12 1998  Catherine Moore  <clm@cygnus.com>
 292
 293         * arm-dis.c (print_insn_big_arm):  Fix indentation.
 294         (print_insn_little_arm): Likewise.
 295
 296 Sun Aug  9 20:17:28 1998  Catherine Moore  <clm@cygnus.com>
 297
 298         * arm-dis.c (print_insn_big_arm):  Check for thumb symbol
 299         attributes.
 300         (print_insn_little_arm): Likewise.
 301
 302 Mon Aug  3 12:43:16 1998  Doug Evans  <devans@seba.cygnus.com>
 303
 304         Move all global state data into opcode table struct, and treat
 305         opcode table as something that is "opened/closed".
 306         * cgen-asm.c (all fns): New first arg of opcode table descriptor.
 307         (cgen_asm_init): Delete.
 308         (cgen_set_parse_operand_fn): New function.
 309         * cgen-dis.c (all fns): New first arg of opcode table descriptor.
 310         (cgen_dis_init): Delete.
 311         * cgen-opc.c (all fns): New first arg of opcode table descriptor.
 312         (cgen_current_{opcode_table_mach,endian}): Delete.
 313 start-sanitize-cygnus
 314         * cgen-asm.in (all fns): New first arg of opcode table descriptor.
 315         * cgen-dis.in (all fns): Ditto.
 316         * cgen-opc.in (all fns): Ditto.
 317 end-sanitize-cygnus
 318         * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
 319
 320 start-sanitize-cygnus
 321         * cgen-asm.in (parse_insn_normal): Ignore case in mnemonics.
 322
 323         * cgen-dis.in (print_normal): Split into two.
 324         (print_address): New function.
 325         (extract_insn_normal): Clarify insn_value arg.
 326         (print_int_insn): Renamed from print_insn.
 327         (print_insn): New arg.
 328         (print_insn_@arch@): Open opcode table if not already done so.
 329         Move reading of insn into print_insn.
 330
 331 end-sanitize-cygnus
 332 Thu Jul 30 21:41:10 1998  Frank Ch. Eigler  <fche@cygnus.com>
 333
 334         * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
 335         instructions.
 336
 337 start-sanitize-m32rx
 338 Tue Jul 28 13:15:39 1998  Doug Evans  <devans@canuck.cygnus.com>
 339
 340         Add support for new versions of mulwhi,mulwlo,macwhi,macwlo that
 341         accept an accumulator choice.
 342         * m32r-opc.c,m32r-opc.h: Regenerate.
 343
 344 end-sanitize-m32rx
 345 Tue Jul 28 11:00:09 1998  Jeffrey A Law  (law@cygnus.com)
 346
 347         * m10300-opc.c: Add entries for "no_match_operands" field in
 348         the opcode table.
 349
 350 start-sanitize-am33
 351 Fri Jul 24 15:22:40 1998  Jeffrey A Law  (law@cygnus.com)
 352
 353         * m10300-dis.c: Do not emit a comma before a PLUS (autoincrement)
 354         operand.
 355
 356 end-sanitize-am33
 357 Fri Jul 24 11:41:37 1998  Doug Evans  <devans@canuck.cygnus.com>
 358
 359         * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
 360
 361 start-sanitize-am33
 362 Thu Jul 23 09:21:03 1998  Jeffrey A Law  (law@cygnus.com)
 363
 364         * m10300-opc.c: Add DSP autoincrement memory loads/stores.
 365
 366         * m10300-opc.c: Add autoincrement memory loads/stores.
 367
 368 end-sanitize-am33
 369 start-sanitize-r5900
 370 Wed Jul 22 17:05:40 1998  Jeffrey A Law  (law@cygnus.com)
 371
 372         * mips-opc.c: Make phmadh and phmsbh synonyms for phmaddh and
 373         phmsubh respectively.
 374
 375 end-sanitize-r5900
 376 Tue Jul 21 13:41:07 1998  Doug Evans  <devans@seba.cygnus.com>
 377
 378 start-sanitize-cygnus
 379         * cgen-opc.in (@arch@_cgen_lookup_insn): Update call to
 380         CGEN_EXTRACT_FN.
 381         (@arch@_cgen_get_insn_operands): @arch@_cgen_get_operand renamed to
 382         @arch_cgen_get_int_operand.
 383         * cgen-asm.in (insert_insn_normal): New arg `pc', callers updated.
 384         Update call to @arch@_cgen_insert_operand.
 385         (@arch@_cgen_assemble_insn): Update call to CGEN_INSERT_FN.
 386         * cgen-dis.in (print_normal): Delete use of CGEN_PCREL_OFFSET.
 387         (extract_insn_normal): New arg `pc', callers updated.
 388         Update call to @arch@_cgen_extract_operand.
 389         (print_insn): Update call to CGEN_EXTRACT_FN.
 390 end-sanitize-cygnus
 391         * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
 392
 393 start-sanitize-am33
 394 Mon Jul 20 12:10:37 1998  Jeffrey A Law  (law@cygnus.com)
 395
 396         * m10300-opc.c: Fix load to sp and store from sp for the am33.
 397         Add more multimedia instructions.
 398
 399 Thu Jul 16 18:04:46 1998  Jeffrey A Law  (law@cygnus.com)
 400
 401         * m10300-opc.c (mn10300_opcodes): Fix opcode for 4 operand "mul" and
 402         "mulu".
 403
 404 end-sanitize-am33
 405 start-sanitize-r5900
 406 Mon Jul 13 18:14:24 1998  Jeffrey A Law  (law@cygnus.com)
 407
 408         * mips-opc.c (pref): Enabled for the r5900.
 409
 410 end-sanitize-r5900
 411 Mon Jul 13 14:53:59 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>
 412
 413         * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
 414         the first prefix.
 415         (dofloat): Correct test for fnstsw.  Print `fnstsw %ax' rather
 416         than `fnstsw %eax'.
 417         (OP_J): Remove unnecessary subtraction when 16-bit displacement
 418         will be masked later.
 419
 420 start-sanitize-am33
 421 Fri Jul 10 23:09:56 1998  Jeffrey A Law  (law@cygnus.com)
 422
 423         * m10300-opc.c (mn10300_opcodes): Fix destination operand for 3 operand
 424         instructions.
 425
 426 Wed Jul  8 11:32:44 1998  Jeffrey A Law  (law@cygnus.com)
 427
 428         * m10300-dis.c (disassemble): When printing RREGs and XRREGs, map
 429         from raw register #s to symbolic names to make debugging easier.
 430
 431 end-sanitize-am33
 432 Thu Jul  2 17:11:27 1998  Doug Evans  <devans@seba.cygnus.com>
 433
 434         * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
 435
 436 Wed Jul  1 16:11:16 1998  Doug Evans  <devans@seba.cygnus.com>
 437
 438         * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
 439 start-sanitize-cygnus
 440         * Makefile.am (CGENDIR): Set via configure.
 441         (CGEN): New variable.
 442         (CGENFILES): object.scm renamed to cos.scm.
 443         (run-cgen): Renamed from cgen.  stamp file renamed to stamp-$prefix.
 444         (stamp-m32r): Pass prefix to run-cgen.
 445         * Makefile.in: Regenerate.
 446         * cgen-asm.in: @arch@-opc.h renamed to @prefix@-opc.h.
 447         * cgen-dis.in: Ditto.
 448         * cgen-opc.in: Ditto.
 449         * cgen.sh: New args cgen,prefix.  Delete args scheme,schemeflags.
 450         * configure.in: AC_SUBST cgen,cgendir.  No longer look for guile.
 451         * configure: Regenerate.
 452 end-sanitize-cygnus
 453
 454 start-sanitize-am33
 455 Tue Jun 30 09:59:37 1998  Jeffrey A Law  (law@cygnus.com)
 456
 457         * m10300-opc.c: Reorder "movbu" and "movhu" instructions too.
 458
 459 Mon Jun 29 14:54:32 1998  Jeffrey A Law  (law@cygnus.com)
 460
 461         * m10300-opc.c: Reorder more instructions so that we do not
 462         accidentally match a mn10300 instruction when we really
 463         wanted an am33 instruction.
 464
 465 end-sanitize-am33
 466 Fri Jun 26 11:08:55 1998  Jeffrey A Law  (law@cygnus.com)
 467
 468         * m10300-dis.c: Only recognize instructions from the currently
 469         selected machine.
 470         * m10300-opc.c: Add field indicating the particular variant of
 471         the mn10300 each instruction is available on.
 472
 473 Fri Jun 26 12:04:21 1998  Ian Lance Taylor  <ian@cygnus.com>
 474
 475         * configure.in: For bfd_vax_arch, build vax-dis.lo.
 476         * Makefile.am: Rebuild dependencies.
 477         (CFILES): Add vax-dis.c.
 478         (ALL_MACHINES): Add vax-dis.lo.
 479         * aclocal.m4: Rebuild with current libtool.
 480         * configure, Makefile.in: Rebuild.
 481
 482 Fri Jun 26 12:03:20 1998  Klaus Kaempf  <kkaempf@progis.de>
 483
 484         * vax-dis.c: New file, from work by Pauline Middelink
 485         <middelin@polyware.iaf.nl>.
 486         * disassemble.c (ARCH_vax): Define if ARCH_all.
 487         (disassembler): Add case for ARCH_vax.
 488         * makefile.vms: Support compilation on vms/vax.
 489
 490 start-sanitize-sky
 491 Wed Jun 24 17:14:01 1998  Ian Carmichael  <iancarm@cygnus.com>
 492
 493         * dvp-opc.c (DVP_OPERAND_RELOC_11_S4): Temporarily back out
 494         the DVP_OPERAND_RELOC_11_S4 relocation.
 495
 496 end-sanitize-sky
 497 start-sanitize-am33
 498 Wed Jun 24 09:53:06 1998  Jeffrey A Law  (law@cygnus.com)
 499
 500         * m10300-dis.c (print_insn_mn10300): 0xf7 opcode prefix specifies
 501         4 byte instructions.
 502         (disassemble): Correctly handle FMT_D10 instructions.
 503
 504         * m10300-opc.c (mn10300_opcodes): Fix typo in IMM24 versions of the
 505         am33 shift instructions.
 506
 507         * m10300-dis.c (print_insn_mn10300): 0xf9 opcode prefix specifies
 508         3 byte instructions.
 509         (disassemble): Handle new instruction formats FMT_D6, FMT_D7, FMT_D8
 510         FMT_D9 and FMT_D10.  Handle various new opcode flags for the am33.
 511
 512         * m10300-opc.c (IMM32_HIGH8_MEM): New operand type.
 513         (mn10300_opcodes): Reorder so as to try and select opcodes from
 514         the core chip when multiple alternatives exist.  Change several
 515         am33 instructions to use IMM32_HIGH8_MEM.  Fix typos in "mac" and
 516         "macbu" instructions.  Fix typos in a couple DSP instructions too.
 517
 518 end-sanitize-am33
 519 Tue Jun 23 19:42:18 1998  Mark Alexander  <marka@cygnus.com>
 520
 521         * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
 522         related to sign extension and the size of ints.
 523
 524 Tue Jun 23 10:59:26 1998  Jeffrey A Law  (law@cygnus.com)
 525
 526         * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
 527         instructions.  Support (sp) addressing mode by expanding it into
 528         (0,sp).
 529
 530 start-sanitize-sky
 531 Mon Jun 22 15:48:29 1998  Ian Carmichael  <iancarm@cygnus.com>
 532
 533         * dvp-opc.c (LIMM11, LUIMM15): New symbol types
 534         DVP_OPERAND_RELOC_U15_S3 and DVP_OPERAND_RELOC_11_S4 to allow labels to
 535         be used as immediate values.
 536
 537 end-sanitize-sky
 538 start-sanitize-am33
 539 Mon Jun 22 13:36:27 1998  Jeffrey A Law  (law@cygnus.com)
 540
 541         * m10300-opc.c: Support 4 byte DSP instructions.
 542
 543 end-sanitize-am33
 544 Sat Jun 20 14:46:20 1998  Frank Ch. Eigler  <fche@cygnus.com>
 545
 546         * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
 547
 548 start-sanitize-am33
 549 Fri Jun 19 16:47:06 1998  Jeffrey A Law  (law@cygnus.com)
 550
 551         * m10300-opc.c: Support 6 and 7 byte am33 instructions.
 552
 553 end-sanitize-am33
 554 Fri Jun 19 09:16:42 1998  Mark Alexander  <marka@cygnus.com>
 555
 556         * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
 557
 558 start-sanitize-am33
 559 Fri Jun 19 09:42:51 1998  Jeffrey A Law  (law@cygnus.com)
 560
 561         * m10300-opc.c: Support for 3 byte and 4 byte extended instructions
 562         found on the mn10300.
 563
 564 end-sanitize-am33
 565 1998-06-18  Ulrich Drepper  <drepper@cygnus.com>
 566
 567         * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
 568         sysexit.
 569
 570 Thu Jun 18 10:22:24 1998  John Metzler  <jmetzler@cygnus.com>
 571
 572         * mips-dis.c (print_insn_little_mips): Previously, instruction
 573         printing references the symbol table to determine whether the
 574         instruction resides in a block regular instructions or mips16
 575         instructions. However, when the disassembler gets used in other
 576         environments where the symbol table is not present, we no longer
 577         rely in the symbol table, rather, use the low bit of the
 578         instructions address to guess. There should be no change for usage
 579         of the disassembler in host based programse, gdb ,objdump.
 580         (print_insn_big_mips): ditto.
 581         (print_insn_mips): ditto
 582
 583 Wed Jun 17 21:19:01 1998  Mark Alexander  <marka@cygnus.com>
 584
 585         * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
 586
 587 Wed Jun 17 17:49:23 1998  Jeffrey A Law  (law@cygnus.com)
 588
 589 start-sanitize-am33
 590         * m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
 591         operands for the am33.
 592         (mn10300_opcodes): Add new instructions from the am33.
 593 end-sanitize-am33
 594         * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
 595
 596 Tue Jun 16 13:10:51 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>
 597
 598         * i386-dis.c (index16): Add '%' to register names.  Use ','
 599         instead of '+'.
 600
 601 Sat Jun 13 11:33:55 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>
 602
 603         * i386-dis.c: Don't print opcode suffix when we can figure out the
 604         size (and gas can!) by register operands, or from the default
 605         size.
 606         (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros.  Rename 'C'
 607         macro to 'E'.
 608         (dis386, dis386_twobyte, grps): Use new suffix macros.
 609         (dis386): Correct imul Ib to imul sIb.  Change jnl to jge to be
 610         consistent.  Add suffix for call, jmp, lcall, ljmp, iret.  Reverse
 611         order of cmps operands to agree with Intel docs.  Correct operand
 612         of aad and aam (Ib -> sIb).  Change ud2b from 0fb8 to 0fb9 to
 613         agree with Intel docs.
 614         (print_insn_x86): Print orphan fwait before other prefixes.
 615         Return correct byte count for orphan fwait with prefixes.  Don't
 616         print `bound' operands in reverse order.
 617         (ckprefix): Stop accumulating prefixes if we get fwait.
 618         (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
 619
 620 Fri Jun 12 13:40:38 1998  Tom Tromey  <tromey@cygnus.com>
 621
 622         * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
 623         ($(PACKAGE).pot): Unconditionally depend on POTFILES.
 624
 625 Fri Jun 12 11:04:06 1998  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
 626
 627         Fix problems when bfd_vma is wider than long.
 628         * i386-dis.c: Make op_address and start_pc unsigned.
 629         (set_op): Make parameter unsigned.
 630         (print_insn_x86): Cast to bfd_vma when passing a value to
 631         print_address_func.
 632         * ns32k-dis.c (CORE_ADDR): Don't define.
 633         (print_insn_ns32k): Change type of addr to bfd_vma.  Use
 634         bfd_scan_vma to read back address.
 635         (print_insn_arg): Change type of addr to bfd_vma.  Use sprintf_vma
 636         to format it.
 637         * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
 638         (NEXTULONG): New definition.
 639         (print_insn_m68k): Avoid overflow when computing third argument of
 640         print_insn_arg.
 641         (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
 642         Use disp instead of val to store offset values.
 643         (print_indexed): Use base_disp instead of word to store base
 644         displacement, to avoid overflow.
 645         * m10300-dis.c (disassemble): Cast value to long when computing
 646         pc-relative address, to get correct sign extension.
 647
 648 Wed Jun 10 15:58:37 1998  Doug Evans  <devans@canuck.cygnus.com>
 649
 650         * m32r-opc.c: Regenerate.
 651
 652 Tue Jun  9 14:27:57 1998  Nick Clifton  <nickc@cygnus.com>
 653
 654         * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
 655         'mov rX, rY'.  Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
 656
 657 Mon Jun  8 18:17:21 1998  Nick Clifton  <nickc@cygnus.com>
 658
 659         * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
 660
 661 Fri Jun  5 23:47:55 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>
 662
 663         * i386-dis.c:  Combine aflag and dflag into sizeflag.  Change OP_*
 664         functions to void.
 665         (OP_DSreg): Rename from OP_DSSI.
 666         (OP_ESreg): Rename from OP_ESDI.
 667         (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
 668         (DSBX): Define.
 669         (append_seg): Rename from append_prefix.
 670         (ptr_reg): New function.
 671         (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
 672         Add DSBX for xlat.
 673         (PREFIX_ADDR): Rename from PREFIX_ADR.
 674         (float_reg): Add non-broken opcodes for people who don't want
 675         UNIXWARE_COMPAT.
 676
 677 Fri Jun  5 19:15:04 1998  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
 678
 679         * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
 680         68000/68008/68010.
 681
 682 Wed Jun  3 18:56:22 1998  H.J. Lu  <hjl@gnu.org>
 683
 684         * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
 685
 686 Tue Jun  2 15:06:46 1998  Geoff Keating  <geoffk@ozemail.com.au>
 687
 688         * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
 689         0; produce error message for shifts of size 32 (or 64 for 64-bit
 690         shifts), because the hardware doesn't support them.
 691
 692 start-sanitize-r5900
 693 Mon Jun  1 10:27:26 1998  Jeffrey A Law  (law@cygnus.com)
 694
 695         * mips-opc.c (c.lt.s): Remove r5900 specific variant.
 696         (c.le.s): Likewise.
 697
 698         * vu0.h (sqc2): Fix opcode.
 699
 700         * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
 701         (sqrt.s): Likewise.
 702
 703 end-sanitize-r5900
 704 start-sanitize-cygnus
 705 Thu May 28 08:46:09 1998  Catherine Moore <clm@cygnus.com>
 706
 707        * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
 708        Change pinfo to use WR_HILO.
 709
 710 end-sanitize-cygnus
 711 Wed May 27 15:29:13 1998  Nick Clifton  <nickc@cygnus.com>
 712
 713         * d30v-opc.c: Add new operand: Ra3.  Change SHORT_B3, SHORT_B3b,
 714         LONG_2, LONG_2b formats to use this new operand.
 715
 716 Tue May 26 20:47:48 1998  Stan Cox  <scox@cygnus.com>
 717
 718         * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
 719
 720 Tue May 26 20:45:33 1998  Mark Alexander  <marka@cygnus.com>
 721
 722         * sparc-dis.c (print_insn_sparc): big endian instruction / little
 723         endian data support.
 724
 725 Tue May 26 16:14:39 1998  Nick Clifton  <nickc@cygnus.com>
 726
 727         * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
 728         and SHORT_B3b formats to use Rb instead of Ra.
 729
 730         Add FLAG_MUL16 to MUL2XH opcode.
 731
 732         Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
 733         to existing 1.1.1 parallelisation prohibition procedure.
 734
 735 Fri May 22 16:00:00 1998  Doug Evans  <devans@canuck.cygnus.com>
 736
 737         * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
 738         * cgen-dis.in (extract_normal): Likewise.
 739         * m32r-asm.c,m32r-dis.c: Regenerate.
 740
 741 start-sanitize-sky
 742 Fri May 22 11:44:10 1998  Doug Evans  <devans@canuck.cygnus.com>
 743
 744         * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
 745
 746 end-sanitize-sky
 747 start-sanitize-r5900
 748 Wed May 20 00:22:27 1998  Jeffrey A Law  (law@cygnus.com)
 749
 750         * mips-opc.c (multu1): Add two operand variant for the r5900.
 751
 752 end-sanitize-r5900
 753 Tue May 19 17:36:08 1998  Ian Lance Taylor  <ian@cygnus.com>
 754
 755         * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
 756         with a shift count of 0.
 757
 758 start-sanitize-r5900
 759 Mon May 18 14:27:06 1998  Frank Ch. Eigler  <fche@cygnus.com>
 760
 761         * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
 762
 763 Mon May 18 11:44:00 1998  Jeffrey A Law  (law@cygnus.com)
 764
 765         * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
 766         (_print_insn_mips): Likewise.
 767         * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
 768         completers.
 769
 770 end-sanitize-r5900
 771 Fri May 15 14:58:31 1998  Doug Evans  <devans@seba.cygnus.com>
 772
 773         * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
 774         (cgen_hw_lookup_by_num): New function.
 775
 776 start-sanitize-m32rx
 777         * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
 778
 779 end-sanitize-m32rx
 780 Wed May 13 17:03:59 1998  Doug Evans  <devans@canuck.cygnus.com>
 781
 782         * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
 783
 784 Wed May 13 14:34:31 1998  Mark Alexander  <marka@cygnus.com>
 785
 786         * sparc-dis.c (print_insn_sparc): Always fetch instructions
 787         as big-endian on SPARClite.
 788
 789 start-sanitize-m32rx
 790 Tue May 12 13:39:51 1998  Nick Clifton  <nickc@cygnus.com>
 791
 792         * m32r-opc.c: Regenerated - SPECIAL attribute added to some
 793         insns.
 794         * m32r-opc.h: Regenerated - SPECIAL attribute added to some
 795         insns.
 796
 797 end-sanitize-m32rx
 798 Tue May 12 11:46:31 1998  Richard Henderson  <rth@cygnus.com>
 799
 800         * d30v-opc.c (pre_defined_register): Remove alias for r0.
 801
 802 start-sanitize-r5900
 803 Mon May 11 13:12:15 1998  Frank Ch. Eigler  <fche@cygnus.com>
 804
 805         * mips-opc.c (break): Added 20-bit single-operand break
 806         instruction for R5900 only.
 807
 808 end-sanitize-r5900
 809 Sun May 10 22:37:22 1998  Jeffrey A Law  (law@cygnus.com)
 810
 811         * po/Make-in (install-info): New target.
 812
 813 Thu May  7 17:15:59 1998  Ian Lance Taylor  <ian@cygnus.com>
 814
 815         * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
 816         * configure: Rebuild.
 817
 818 Thu May  7 12:49:46 1998  Frank Ch. Eigler  <fche@cygnus.com>
 819
 820         * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
 821         variety of ISA2 instructions to set bottom ten bits of trap code.
 822
 823 Thu May  7 11:54:25 1998  Ian Lance Taylor  <ian@cygnus.com>
 824
 825         * Makefile.am (config.status): Add explicit target so that
 826         config.status depends upon bfd/configure.in.
 827         * Makefile.in: Rebuild.
 828
 829 Thu May  7 09:33:02 1998  Frank Ch. Eigler  <fche@cygnus.com>
 830
 831         * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
 832         instructions to set bottom ten bits of break code.
 833         * mips-dis.c (print_insn_arg): Implement 'q' operand format used
 834         for above optional argument.
 835
 836 start-sanitize-cygnus
 837 Wed May  6 14:47:17 1998  Doug Evans  <devans@seba.cygnus.com>
 838
 839         * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
 840         * m32r-opc.h: Regenerate.
 841
 842 end-sanitize-cygnus
 843 Wed May  6 15:30:06 1998  Klaus Kaempf  <kkaempf@progis.de>
 844
 845         * makefile.vms: Run dec c with /nodebug.
 846
 847 Mon May  4 10:19:57 1998  Tom Tromey  <tromey@cygnus.com>
 848
 849         * Makefile.in: Rebuilt.
 850         * Makefile.am: Regenerated dependencies with mkdep.
 851
 852         * opintl.h (_): Define as dgettext.
 853
 854 start-sanitize-cygnus
 855 Fri May  1 13:47:42 1998  Doug Evans  <devans@canuck.cygnus.com>
 856
 857         * configure.in: Add support for --enable-cgen-maint.
 858         * Makefile.am (M32R_DEPS): New variable.
 859         (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
 860         * aclocal.m4: Regenerate.
 861         * Makefile.in: Regenerate.
 862         * configure: Regenerate.
 863
 864         * Makefile.am (CGENFILES): Add minsn.scm.
 865
 866 end-sanitize-cygnus
 867 Tue Apr 28 14:12:12 1998  Nick Clifton  <nickc@cygnus.com>
 868
 869         * cgen-asm.c: Internationalised.
 870 start-sanitize-cygnus
 871         * cgen-asm.in: Internationalised.
 872         * cgen-opc.in: Internationalised.
 873 end-sanitize-cygnus
 874         * m32r-asm.c: Internationalised.
 875         * m32r-dis.c: Internationalised.
 876         * m32r-opc.c: Internationalised.
 877
 878         * aclocal.m4: Regenerated.
 879         * configure: Regenerated.
 880         * Makefile.am (POTFILES): Remove inclusion of BFD_H.
 881         * Makefile.in: Rebuild.
 882         * po/POTFILES.in: Rebuilt using rule in Makefile.in.
 883         * po/opcodes.pot: Rebuilt after changing POTFILES.in.
 884
 885 Tue Apr 28 13:13:13 1998  Ian Lance Taylor  <ian@cygnus.com>
 886
 887         * configure.in: Call AC_ISC_POSIX near start.  Move CY_GNU_GETTEXT
 888         after AC_PROG_CC.
 889         * aclocal.m4, configure: Rebuild with current tools.
 890
 891 Mon Apr 27 14:31:00 1998  Nick Clifton  <nickc@cygnus.com>
 892
 893         * opintl.h: New file - contains internationalisation macros used
 894         by source files in this directory.
 895         * po/: New subdirectory - contains internationalisation files.
 896         * po/Make-in: New file - Makefile constructor.
 897         * po/POTFILES.in: New file - list of files in opcodes directory
 898         that should be scan for internationalisation macros.
 899         * po/opcodes.pot: New file - list of internationisation strings
 900         found in files mentioned in po/POTFILES.in.
 901         * Makefile.am: Add rule to build po/POTFILES.in.  Add SUBDIRS
 902         entry.  Add intl directory to include paths.
 903         * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
 904         HAVE_STRCPY, HAVE_LC_MESSAGES
 905         * configure.in: Add rule to build Makefile in po subdirectory.
 906         * Makefile.in: Rebuilt.
 907         * aclocal.m4: Rebuilt.
 908         * config.in: Rebuilt.
 909         * configure: Rebuilt.
 910         * alpha-opc.c: Internationalised.
 911         * arc-dis.c: Internationalised.
 912         * arc-opc.c: Internationalised.
 913         * arm-dis.c: Internationalised.
 914         * cgen-asm.c: Internationalised.
 915         * d30v-dis.c: Internationalised.
 916         * dis-buf.c: Internationalised.
 917 start-sanitize-sky
 918         * dvp-dis.c: Internationalised.
 919         * dvp-opc.c: Internationalised.
 920 end-sanitize-sky
 921         * h8300-dis.c: Internationalised.
 922         * h8500-dis.c: Internationalised.
 923         * i386-dis.c: Internationalised.
 924         * m10200-dis.c: Internationalised.
 925         * m10300-dis.c: Internationalised.
 926         * m68k-dis.c: Internationalised.
 927         * m88k-dis.c: Internationalised.
 928         * mips-dis.c: Internationalised.
 929         * ns32k-dis.c: Internationalised.
 930         * opintl.h: Internationalised.
 931         * ppc-opc.c: Internationalised.
 932         * sparc-dis.c: Internationalised.
 933         * v850-dis.c: Internationalised.
 934         * v850-opc.c: Internationalised.
 935
 936 Mon Apr 27 10:33:56 1998  Doug Evans  <devans@seba.cygnus.com>
 937
 938         * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
 939         (asm_hash_table_entries): New variable.
 940         (cgen_asm_init): Free asm_hash_table_entries.
 941         (hash_insn_array,hash_insn_list): New functions.
 942         (build_asm_hash_table): Use them.  Hash macro insns as well.
 943         (cgen_asm_lookup_insn): Update.
 944         * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
 945         (dis_hash_table_entries): New variable.
 946         (cgen_dis_init): Free dis_hash_table_entries.
 947         (hash_insn_array,hash_insn_list): New functions.
 948         (build_dis_hash_table): Use them.  Hash macro insns as well.
 949         (cgen_dis_lookup_insn): Update.
 950         * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
 951         (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
 952         (cgen_macro_insn_count): New function.
 953         * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
 954         All callers updated.  Sanity check result of extract fn.
 955         (@arch@_cgen_get_insn_operands): Change result type to void.
 956         Delete args insn_value, length.  New arg fields.  All callers updated.
 957         (@arch@_cgen_lookup_get_insn_operands): New function.
 958         * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
 959
 960 Fri Apr 24 16:07:57 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>
 961
 962         * i386-dis.c (OP_DSSI): Print segment override.
 963
 964 start-sanitize-r5900
 965 Thu Apr 23 12:32:07 1998  Frank Ch. Eigler  <fche@cygnus.com>
 966
 967         * mips-opc.c (msub.s): Correct mask pattern for disassembly.
 968
 969 end-sanitize-r5900
 970 start-sanitize-r5900
 971 Mon Apr 20 19:11:55 1998  Frank Ch. Eigler  <fche@cygnus.com>
 972
 973         * mips-opc.c (madd.s): Correct mask pattern for disassembly.
 974
 975 end-sanitize-r5900
 976 start-sanitize-r5900
 977 Sat Apr 18 00:29:18 1998  Jeffrey A Law  (law@cygnus.com)
 978
 979         * vu0.h (vlqd, vlqi): Update per revised specs.
 980
 981 end-sanitize-r5900
 982 start-sanitize-sky
 983 Thu Apr 16 11:44:59 1998  Doug Evans  <devans@canuck.cygnus.com>
 984
 985         * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
 986         (vif_operands): Update.
 987         (vif_get_unpackloc): Delete.
 988         (state_vif_unpackloc{,_star_p}): Delete.
 989         (dvp_opcode_init_parse): Update.
 990         (vif_unpack_len_value): Avoid divide by zero.
 991
 992 end-sanitize-sky
 993 start-sanitize-r5900
 994 Wed Apr 15 10:30:07 1998   Frank Ch. Eigler  <fche@cygnus.com>
 995
 996         * vu0.h: Specs changed for VCALLMSR bit pattern.
 997         * mips-dis.c: (print_insn_arg) Matching change.
 998
 999 end-sanitize-r5900
1000 Mon Apr 13 16:59:39 1998  Nick Clifton  <nickc@cygnus.com>
1001
1002         * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1003         operator.
1004
1005 Mon Apr 13 16:50:27 1998  Ian Lance Taylor  <ian@cygnus.com>
1006
1007         * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1008         (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1009         * configure.in: Define and substitute WIN32LDFLAGS and
1010         WIN32LIBADD.
1011         * aclocal.m4: Rebuild with new libtool.
1012         * configure, Makefile.in: Rebuild.
1013
1014 start-sanitize-r5900
1015 Mon Apr 13 16:02:02 1998  Frank Ch. Eigler  <fche@cygnus.com>
1016
1017         * vu0.h: Corrected bit pattern for VMAXI opcode.
1018
1019 end-sanitize-r5900
1020 Fri Apr 10 18:14:31 1998  Doug Evans  <devans@canuck.cygnus.com>
1021
1022         * m32r-opc.c: Regenerate.
1023
1024 start-sanitize-sky
1025 Mon Apr  6 17:16:48 1998  Doug Evans  <devans@canuck.cygnus.com>
1026
1027         * dvp-opc.c (vif_macros): Tweak unpackloc operand.
1028         (dvp_expand_macro): Implement.
1029         (insert_vif_datalen): Record value with max+1 -> 0 conversion.
1030         (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
1031
1032 end-sanitize-sky
1033 Sun Apr  5 16:04:39 1998  H.J. Lu  <hjl@gnu.org>
1034
1035         * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1036         before trying to copy it.
1037         * Makefile.in: Rebuild.
1038
1039 Thu Apr  2 17:25:49 1998  Nick Clifton  <nickc@cygnus.com>
1040
1041         * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1042
1043 start-sanitize-m32rx
1044 Thu Apr  2 16:44:23 1998  Nick Clifton  <nickc@cygnus.com>
1045
1046         * m32r-opc.c: Fix bit patterns for SAT and SATB.
1047
1048 end-sanitize-m32rx
1049 Wed Apr  1 16:20:27 1998  Ian Dall  <Ian.Dall@dsto.defence.gov.au>
1050
1051         * ns32k-dis.c (bit_extract_simple): New function to extract bits
1052         from an arbitrary valid buffer instead of fetching them on demand
1053         using fetch_data().
1054         (invalid_float): use bit_extract_simple() instead of bit_extract().
1055
1056 start-sanitize-m32rx
1057 Wed Apr  1 14:57:54 1998  Nick Clifton  <nickc@cygnus.com>
1058
1059         * m32r-opc.c: Fix SATB bit pattern.  Add extra control registers.
1060         * m32r-opc.h: Add extra control registers.
1061
1062 end-sanitize-m32rx
1063 Tue Mar 31 11:09:08 1998  Ian Lance Taylor  <ian@cygnus.com>
1064
1065         From H.J. Lu <hjl@gnu.org>:
1066         * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1067         to Ev for both.
1068
1069 Mon Mar 30 17:32:03 1998  Ian Lance Taylor  <ian@cygnus.com>
1070
1071         * Branched binutils 2.9.
1072
1073 Mon Mar 30 15:18:00 1998  Ken Raeburn  <raeburn@cygnus.com>
1074
1075         * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1076         disassembling last 4 bytes of a section.
1077
1078 Fri Mar 27 18:08:13 1998  Ian Lance Taylor  <ian@cygnus.com>
1079
1080         Fix some gcc -Wall warnings:
1081         * arc-dis.c (print_insn): Add casts to avoid warnings.
1082         * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1083         * d10v-dis.c (dis_long, dis_2_short): Likewise.
1084 start-sanitize-sky
1085         * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
1086         (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
1087         (parse_bc, parse_vfreg, parse_accdest): Likewise.
1088         (parse_ffstreg, parse_vif_mode): Likewise.
1089 end-sanitize-sky
1090         * m10200-dis.c (disassemble): Likewise.
1091         * m10300-dis.c (disassemble): Likewise.
1092         * ns32k-dis.c (print_insn_ns32k): Likewise.
1093         * ppc-opc.c (insert_ral, insert_ram): Likewise.
1094         * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1095         * cgen-opc.c (cgen_keyword_search_next): Likewise.
1096         * d10v-dis.c (dis_long, dis_2_short): Likewise.
1097         * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1098 start-sanitize-sky
1099         * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
1100         * dvp-opc.c (parse_dest1, print_uflags): Likewise.
1101         (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
1102 end-sanitize-sky
1103         * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1104 start-sanitize-tic80
1105         * tic80-dis.c (print_one_instruction): Likewise.
1106 end-sanitize-tic80
1107         * w65-dis.c (print_operand): Likewise.
1108         * z8k-dis.c (fetch_data): Likewise.
1109         * a29k-dis.c: Add return type for find_byte_func_type.
1110         * arc-opc.c: Include <stdio.h>.  Remove declarations of
1111         insert_multshift and extract_multshift.
1112         * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1113         conditionals.
1114         (extract_value): Fully parenthesize expression.
1115 start-sanitize-sky
1116         * dvp-opc.c: Include <ctype.h>.
1117         (print_sdest): Add default case to switch.
1118 end-sanitize-sky
1119         * h8500-dis.c (print_insn_h8500): Initialize local variables.
1120         * h8500-opc.h (h8500_table): Fully bracket initializer.
1121         * w65-opc.h (optable): Likewise.
1122         * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1123         * i386-dis.c (OP_E): Initialize local variables.
1124         * m10200-dis.c (print_insn_mn10200): Likewise.
1125         * mips-dis.c (print_insn_mips16): Likewise.
1126         * sh-dis.c (print_insn_shx): Likewise.
1127         * v850-dis.c (print_insn_v850): Likewise.
1128         * ns32k-dis.c (print_insn_arg): Declare.
1129         (get_displacement, invalid_float): Declare.
1130         (list_search, sign_extend, flip_bytes): Declare return type.
1131         (get_displacement): Likewise.
1132         (print_insn_arg): Likewise.  Make d int.  Fix sprintf format
1133         string.
1134         (print_insn_ns32k): Make i unsigned.
1135         (invalid_float): Make static.  Declare type of val.
1136         * tic30-dis.c (print_par_insn): Make i size_t.  Don't check strlen
1137         on each for iteration.
1138         * tic30-dis.c (get_indirect_operand): Likewise.
1139         * z8k-dis.c (print_insn_z8001): Declare return type.
1140         (print_insn_z8002): Likewise.
1141         (unparse_instr): Fix sprintf format strings.
1142
1143 Fri Mar 27 00:05:23 1998  Jeffrey A Law  (law@cygnus.com)
1144
1145         * mips-opc.c: Add "sync.l" and "sync.p".
1146
1147 start-sanitize-sky
1148 Thu Mar 26 13:27:37 1998  Doug Evans  <devans@canuck.cygnus.com>
1149
1150         * dvp-opc.c (extract_vif_datalen): Rewrite.
1151         (vif_insn_len): Perform 0->max+1 conversion for direct length.
1152
1153 Wed Mar 25 13:32:36 1998  Doug Evans  <devans@canuck.cygnus.com>
1154
1155         * dvp-dis.c (print_insn): Print unpack address in hex.
1156         * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
1157         Don't skip over '*', just record it.
1158         (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
1159         (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
1160         Don't skip over '*', just record it.
1161         (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
1162         (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
1163         (vif_opcodes): Likewise.
1164         (state_vif_{mpg,unpack}loc_star_p): New static locals.
1165         (vif_macros,vif_macro_count): New globals.
1166         (vif_unpack_len_value): New arguments wl,cl.  All callers updated.
1167         (vif_set_{mpg,unpack}loc): Delete.  All callers updated.
1168         (vif_get_wl_cl): New function.
1169         (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
1170
1171 end-sanitize-sky
1172 Wed Mar 25 14:32:48 1998  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1173
1174         * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1175         default m68k variant to recognize.
1176
1177         * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1178         (ctrl, cobr, mem, ea): Likewise.
1179         (print_addr): Likewise.  Remove cast.
1180         (ea): Cast argument of print_addr to bfd_vma.
1181
1182         * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1183         variable value.
1184         (cgen_parse_unsigned_integer): Likewise.
1185         (cgen_parse_address): Likewise.
1186
1187 Wed Mar 25 14:31:31 1998  Ian Lance Taylor  <ian@cygnus.com>
1188
1189         * i960-dis.c (ctrl): Add full braces to structure initialization.
1190         (cobr, mem, reg): Likewise.
1191         (ea): Correct parenthesization in expression.
1192
1193         * cgen-asm.c: Include <ctype.h>.
1194         (build_asm_hash_table): Remove unused local variable i.
1195         (cgen_parse_keyword): Add casts to avoid warnings.
1196
1197         * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1198         symbol.  Fix indentation.
1199         (print_insn_little_arm): Likewise.
1200
1201 start-sanitize-r5900
1202 Tue Mar 24 18:11:13 1998  Jeffrey A Law  (law@cygnus.com)
1203
1204         * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
1205         opcode extensions.
1206
1207 end-sanitize-r5900
1208 start-sanitize-m32rx
1209 Mon Mar 23 11:32:11 1998  Nick Clifton  <nickc@cygnus.com>
1210
1211         * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
1212         (PR15418).
1213
1214 end-sanitize-m32rx
1215 start-sanitize-sky
1216 Mon Mar 23 09:45:04 1998  Doug Evans  <devans@canuck.cygnus.com>
1217
1218         * dvp-opc.c (vif_operand_datalen_special): New global.
1219
1220 end-sanitize-sky
1221 start-sanitize-r5900
1222 Sun Mar 22 13:00:14 1998  Jeffrey A Law  (law@cygnus.com)
1223
1224         * vu0.h (vcallms): Use 'O' for call target operand.
1225         * mips-dis.c (print_insn_arg): Handle 'O'.
1226
1227 end-sanitize-r5900
1228 Fri Mar 20 18:55:18 1998  Ian Lance Taylor  <ian@cygnus.com>
1229
1230         * configure.in: Use AM_DISABLE_SHARED.
1231         * aclocal.m4, configure: Rebuild with libtool 1.2.
1232
1233 start-sanitize-r5900
1234 Fri Mar 20 09:01:31 1998  Jeffrey A Law  (law@cygnus.com)
1235
1236         * mips-dis.c: Change '%' to '#' in r5900 support.
1237         * vu0.h: Likewise.
1238
1239 end-sanitize-r5900
1240 Thu Mar 19 15:46:53 1998  Nick Clifton  <nickc@cygnus.com>
1241
1242         These patches are courtesy of Jonathan Walton and Tony Thompson
1243         (athompso@cambridge.arm.com).
1244
1245         * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1246         relative addresses.
1247
1248         * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1249         both the offset and the label closest to the destination.
1250
1251 start-sanitize-r5900
1252 Thu Mar 19 13:53:25 1998  Jeffrey A Law  (law@cygnus.com)
1253
1254         * vu0.h: New file with cop2/vu0 instructions.
1255         * mips-opc.c: Include vu0.h.
1256         * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
1257         J, Q, X, and U.
1258         (print_insn_mips): Do not emit a tab after an instruction if the
1259         first arg is an instruction completer (&).  If the next arg is an
1260         escape character (%), then print the next arg verbatim.
1261         * Makefile.am (mips-opc.lo): Depend on vu0.h
1262
1263 end-sanitize-r5900
1264 start-sanitize-sky
1265 Thu Mar 19 10:42:51 1998  Doug Evans  <devans@canuck.cygnus.com>
1266
1267         * dvp-opc.c (vif_opcodes): Add stcycl.
1268
1269 Tue Mar 17 10:53:58 1998  Doug Evans  <devans@canuck.cygnus.com>
1270
1271         * dvp-dis.c (print_dma): Change length from 16 to 8.
1272
1273 end-sanitize-sky
1274 Sat Mar 14 23:47:14 1998  Doug Evans  <devans@seba.cygnus.com>
1275
1276         * m32r-opc.h: Regenerate.
1277
1278 start-sanitize-sky
1279 Thu Mar 12 09:18:54 1998  Doug Evans  <devans@canuck.cygnus.com>
1280
1281         * dvp-opc.c (print_dest1): Print dest spec again.
1282         (print_vfreg,print_accdest): Likewise.
1283         (vif_unpack_len): Round result up to word boundary.
1284
1285 end-sanitize-sky
1286 start-sanitize-vr4320
1287 Tue Mar 10 15:57:23 1998  Gavin Koch  <gavin@cygnus.com>
1288
1289         * mips-opc.c ("clz","dclz"): Added the 4320 versions.
1290
1291 Mon Mar  9 15:22:06 1998  Gavin Koch  <gavin@cygnus.com>
1292
1293         * mips-opc.c ("macc*","mul*"): Added the 4320 versions
1294         of these.
1295
1296 end-sanitize-vr4320
1297 start-sanitize-sky
1298 Fri Mar  6 11:27:53 1998  Doug Evans  <devans@canuck.cygnus.com>
1299
1300         * dvp-dis.c (print_gif): Fix length calcs for gifimage.
1301         (print_insn): Do mask comparison on proper opcode word.
1302         Print unsigned values in hex.
1303         * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
1304         (parse_bc): Catch missing dest.
1305         (parse_vfreg): Replace atoi call with strtol.
1306         (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
1307         (parse_bcftreg,parse_ffstreg): Handle missing dest.
1308         (extract_gif_eop): New function.
1309         (gif_operands): Update eop entry.
1310         (VGIFOP,VGIFNREGS): Fix calcs.
1311         (extract_gif_prim): Set *pinvalid to 1 if prim not used.
1312         (gif_regs): Add entry for unused 11 case.
1313         (print_gif_regs): Print empty list instead of nothing.
1314         (extract_gif_nloop): Fix value calc.
1315         (print_gif_nloop): Always print value, even if 0.
1316         (insert_vif_wlcl,extract_vif_wlcl): New functions.
1317         (vif_operands): Use them for wl,cl fields.
1318         (state_vif_wl,state_vif_cl): New static locals.
1319         (parse_vif_mode): Handle numeric args.
1320         (vif_unpack_len_value,vif_unpack_len): New functions.
1321         (vif_insn_len): Call vif_unpack_len.
1322
1323 end-sanitize-sky
1324 Wed Mar  4 12:08:14 1998  Doug Evans  <devans@canuck.cygnus.com>
1325
1326         * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1327
1328 Tue Mar  3 18:51:22 1998  Doug Evans  <devans@seba.cygnus.com>
1329
1330         * cgen-asm.in: Move insertion of generated routines to top of file.
1331         (insert_normal): Add prototype.  Delete `shift' arg.
1332         * cgen-dis.in: Move insertion of generated routines to top of file.
1333         (extract_normal): Add prototype.  Delete `shift' arg.
1334         (print_normal): Add prototype.  Call CGEN_PRINT_NORMAL if defined.
1335         (print_keyword): Add prototype.  Fix type of `attrs' arg.
1336
1337 start-sanitize-vr4320
1338 Tue Mar  3 11:47:58 1998  Gavin Koch  <gavin@cygnus.com>
1339
1340         * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
1341         * mips-opc.c ("mac","dmac") : Added 4320 insns.
1342
1343 end-sanitize-vr4320
1344 Sat Feb 28 16:02:34 1998  Nick Clifton  <nickc@cygnus.com>
1345
1346         * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1347         assume that info->symbols is non-empty.
1348
1349 Sat Feb 28 12:19:05 1998  Richard Henderson  <rth@cygnus.com>
1350
1351         * alpha-opc.c (cvtqs) There is no such thing.
1352         (cvttq): Missing most of the /*d variants.
1353
1354 start-sanitize-r5900
1355 Fri Feb 27 13:16:42 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1356
1357         * mips-opc.c (r5900/madd.s): Takes three operands, not four.  Fix
1358         opcode.
1359         (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
1360         (r5900/msub.s): Takes three operands, not four.  Fix opcode.
1361
1362 end-sanitize-r5900
1363 Thu Feb 26 15:53:09 1998  Michael Meissner  <meissner@cygnus.com>
1364
1365         * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1366         delayed branches or jumps.
1367
1368 start-sanitize-sky
1369 Fri Feb 27 10:04:19 1998  Doug Evans  <devans@canuck.cygnus.com>
1370
1371         * dvp-opc.c (vif_operands): Add unpack[u] support.
1372         (vif_opcodes): Ditto.
1373         (*_vif_imrubits): Renamed from *_vif_imrbits.
1374
1375 Wed Feb 25 00:27:44 1998  Doug Evans  <devans@canuck.cygnus.com>
1376
1377         * dvp-dis.c (print_insn): Handle word number.
1378         Handle mips address vs vu address.
1379         * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
1380         (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
1381         ({insert,extract}_dma_addr): Fix word ofset.
1382         ({insert,print}_gif_regs): Fix encode/decode.
1383
1384 end-sanitize-sky
1385 Tue Feb 24 10:46:44 1998  Doug Evans  <devans@canuck.cygnus.com>
1386
1387         * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1388         to *info->symbols.
1389         * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1390         * tic30-dis.c (print_branch): Likewise.
1391 start-sanitize-sky
1392         * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
1393         * dvp-dis.c (dvp_info_mach_type): New function.
1394         (print_insn_dvp): Call it.
1395         (print_vif): Return length of 4 if mpg or direct insn so following
1396         insns get properly disabled.
1397         (print_gif): Fix word order.
1398         * dvp-opc.c (vif_insn_len): New argument `pcpu'.  All callers updated.
1399         (gif_operands): Fix word order.
1400         (gif_opcodes): Likewise.
1401         ({insert,extract,print}_gif_regs): Likewise.
1402         (gif_regs): Add new register number/name changes.
1403         (dma_opcodes): Add dmarefe insn.
1404 end-sanitize-sky
1405
1406 Tue Feb 24 11:06:18 1998  Nick Clifton  <nickc@cygnus.com>
1407
1408         * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1409         saved_symbol code as it is no longer needed.
1410
1411 Mon Feb 23 13:16:17 1998  Doug Evans  <devans@seba.cygnus.com>
1412
1413         * cgen-asm.c: Include symcat.h.
1414         * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
1415
1416         * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1417
1418 start-sanitize-sky
1419 Mon Feb 23 09:51:39 1998  Doug Evans  <devans@canuck.cygnus.com>
1420
1421         * dvp-opc.c (extra_dma_flags): Fix typos.
1422         (dma_operands): Fix word numbers.
1423         (dma_opcodes): Likewise.
1424         ({insert,extract}_dma_flags): Likewise.
1425
1426 end-sanitize-sky
1427 Mon Feb 23 10:34:58 1998  Jeffrey A Law  (law@cygnus.com)
1428
1429         * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1430
1431 start-sanitize-sky
1432 Fri Feb 20 18:02:20 1998  Doug Evans  <devans@canuck.cygnus.com>
1433
1434         * dvp-dis.c (print_gif): Complete.
1435         * dvp-opc.c (gif_operands,gif_opcodes): Complete.
1436         (state_gif_{nregs,regs,nloop}): New static locals.
1437         (*_gif_*): Complete.
1438         (dvp_opcode_init_{parse,print}): Init gif state locals.
1439         (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
1440         (vif_insn_len): Handle `unpack'.
1441         ({insert,extract}_dma_flags): Complete.
1442
1443 end-sanitize-sky
1444 start-sanitize-r5900
1445 Fri Feb 20 01:23:16 1998  Jeffrey A Law  (law@cygnus.com)
1446
1447         * mips-opc.c (mula.s): Renamed from multa.s.
1448
1449 end-sanitize-r5900
1450 Thu Feb 19 16:51:13 1998  Doug Evans  <devans@canuck.cygnus.com>
1451
1452         * m32r-opc.[ch]: Regenerate.
1453
1454 start-sanitize-sky
1455 Thu Feb 19 02:11:39 1998  Doug Evans  <devans@charmed.cygnus.com>
1456
1457         * dvp-opc.c (dma_operands): Rewrite.
1458         (dma_operand_{count,addr}): New globals.
1459         (dma_opcodes): Rewrite.  Add "dmaend" with no operands.
1460         (insert_dma_addr): Insert value into insn.
1461         (extract_dma_addr): Extract value from insn.
1462
1463 Wed Feb 18 15:46:46 1998  Doug Evans  <devans@canuck.cygnus.com>
1464
1465         * dvp-dis.c (print_vu): Handle loi insns.
1466         (print_insn): Likewise.
1467         * dvp-opc.c (vu_lower_opcodes): Add "loi".
1468         (vu_operands): Make LDEST1 a FAKE operand.
1469         (parse_dest1): Allow elided argument.
1470         (print_dest1): Don't print the argument.
1471
1472 Tue Feb 17 18:48:25 1998  Doug Evans  <devans@canuck.cygnus.com>
1473
1474         * dvp-opc.c (parse_vfreg): Dest spec is optional.
1475         (print_vfreg): Don't print dest spec.
1476         (parse_accdest): Dest spec is optional.
1477         (print_accdest): Don't print dest spec.
1478
1479 end-sanitize-sky
1480 Tue Feb 17 17:14:50 1998  Doug Evans  <devans@seba.cygnus.com>
1481
1482         * Makefile.am (CGENFILES): Update.
1483         * Makefile.in: Regenerate.
1484         * cgen-asm.in (insert_normal): Result is error message now.
1485         Validate value to be inserted.
1486         (insert_insn_normal): Result is error message now.
1487         (@arch@_cgen_assemble_insn): Update.
1488         * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1489         arguments.  Don't perform validation here.
1490         * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1491
1492 Fri Feb 13 14:26:06 1998  Doug Evans  <devans@canuck.cygnus.com>
1493
1494         * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
1495         operand instance list.
1496         * m32r-opc.c: Regenerate.
1497
1498 Fri Feb 13 14:53:02 1998  Ian Lance Taylor  <ian@cygnus.com>
1499
1500         * Makefile.am (AUTOMAKE_OPTIONS): Define.
1501         * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1502
1503 Fri Feb 13 10:21:09 1998  Mark Alexander  <marka@cygnus.com>
1504
1505         * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1506
1507 Fri Feb 13 13:12:14 1998  Ian Lance Taylor  <ian@cygnus.com>
1508
1509         * configure.in: Get the version number from BFD.
1510         * configure: Rebuild.
1511
1512         From H.J. Lu <hjl@gnu.org>:
1513         * Makefile.am (libopcodes_la_LDFLAGS): Define.
1514         * Makefile.in: Rebuild.
1515
1516 Fri Feb 13 09:50:32 1998  Nick Clifton  <nickc@cygnus.com>
1517
1518         * m32r-opc.c: Regenerate.
1519         * m32r-opc.h: Regenerate.
1520
1521 Thu Feb 12 11:01:40 1998  Doug Evans  <devans@canuck.cygnus.com>
1522
1523         * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
1524         Ignore ALIAS insns if asked to.
1525         (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
1526         * m32r-opc.c: Regenerate.
1527
1528 start-sanitize-sky
1529         * dvp.opc.c: Nicely format opcode tables.
1530         (vu_operands): New element UFLAGS.
1531         (parse_uflags,print_uflags): New functions.
1532         (vu_upper_opcodes): Add UFLAGS to all insns.
1533
1534 end-sanitize-sky
1535 Thu Feb 12 03:41:00 1998  J"orn Rennecke  <amylaar@cygnus.co.uk>
1536
1537         Fix rac to accept only a0:
1538         * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1539         Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1540         Introduce OPERAND_GPR.
1541         * d10v-dis.c (print_operand): Likewise.
1542
1543 Wed Feb 11 18:58:34 1998  Doug Evans  <devans@seba.cygnus.com>
1544
1545         * cgen-opc.in: New file.
1546         * cgen.sh: Translate @ARCH@.  Cat cgen-opc.in into @arch@-opc.c.
1547         * Makefile.am (CGENFILES): Add cgen-opc.in.
1548         * Makefile.in: Regenerate.
1549
1550         * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1551         (cgen_hw_lookup): Make result const.
1552
1553         * cgen-dis.in (*): Use PTR instead of void *.
1554         (print_insn): Delete unused vars `i', `syntax'.
1555
1556         * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1557
1558 start-sanitize-sky
1559 Tue Feb 10 14:56:24 1998  Doug Evans  <devans@canuck.cygnus.com>
1560
1561         * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
1562         (vif_opcodes): Update renamed insns.
1563         * dvp-dis.c (*): Likewise.
1564
1565 end-sanitize-sky
1566 Sat Feb  7 15:30:27 1998  Ian Lance Taylor  <ian@cygnus.com>
1567
1568         * configure, aclocal.m4: Rebuild with new libtool.
1569
1570 Thu Feb  5 17:56:10 1998  Michael Meissner  <meissner@cygnus.com>
1571
1572         * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1573         instructions use a PC relative branch, not absolute.
1574
1575 Wed Feb  4 19:17:37 1998  Ian Lance Taylor  <ian@cygnus.com>
1576
1577         * configure.in: Set libtool_enable_shared rather than
1578         libtool_shared.  Remove diversion hack.
1579         * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1580
1581 Tue Feb  3 17:19:40 1998  Doug Evans  <devans@seba.cygnus.com>
1582
1583         * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1584         * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1585
1586 Mon Feb  2 19:22:15 1998  Steve Haworth  <steve@pm.cse.rmit.EDU.AU>
1587
1588         * tic30-dis.c: New file.
1589         * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1590         * configure.in: Handle bfd_tic30_arch.
1591         * Makefile.am: Rebuild dependencies.
1592         (CFILES): Add tic30-dis.c
1593         (ALL_MACHINES): Add tic30-dis.lo.
1594         * configure, Makefile.in: Rebuild.
1595
1596 start-sanitize-m32rx
1597 Mon Feb  2 11:04:08 1998  Nick Clifton  <nickc@cygnus.com>
1598
1599         * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
1600         versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
1601         macwhi-a and macwlo-a instructions.
1602
1603 end-sanitize-m32rx
1604 start-sanitize-sky
1605 Fri Jan 30 17:39:21 1998  Ian Carmichael  <iancarm@cygnus.com>
1606
1607         * dvp-opc.c, fixed encoding of a bunch of instructions to
1608         be consistent with the asmvu assembler (and inconsistent
1609         with the specification).
1610
1611 Thu Jan 29 18:14:56 1998  Ian Carmichael  <iancarm@cygnus.com>
1612
1613         * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
1614         in the opcode table.  The pkemscalf instruction must come first.
1615
1616 Thu Jan 29 16:47:24 1998  Ian Carmichael  <iancarm@cygnus.com>
1617
1618         * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
1619
1620 end-sanitize-sky
1621 Thu Jan 29 13:02:56 1998  Doug Evans  <devans@canuck.cygnus.com>
1622
1623         * m32r-opc.h (HAVE_CPU_M32R): Define.
1624
1625 start-sanitize-sky
1626 Wed Jan 28 13:46:19 1998  Doug Evans  <devans@canuck.cygnus.com>
1627
1628         * dvp-dis.c, dvp-opc.c: New files.
1629         * configure.in: Compile them if bfd_dvp_arch, as well as mips.
1630         * configure: Regenerate.
1631         * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
1632         (dvp-dis.lo,dvp-opc.lo): Add rules for.
1633         (mips-dis.lo): Compile with @archdefs@.
1634         * Makefile.in: Regenerate.
1635         * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
1636         * mips-dis.c (print_insn_little_mips): Check for DVP insns.
1637
1638 end-sanitize-sky
1639 Wed Jan 28 09:55:03 1998  Nick Clifton  <nickc@cygnus.com>
1640
1641         * v850-opc.c (insertion routines): If both alignment and size is
1642         wrong then report this.
1643
1644 Tue Jan 27 21:52:59 1998  Jeffrey A Law  (law@cygnus.com)
1645
1646         * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1647         Only recognize instructions for the current target_processor.
1648
1649 Thu Jan 22 16:20:17 1998  Fred Fish  <fnf@cygnus.com>
1650
1651         * d10v-dis.c (PC_MASK): Correct value.
1652         (print_operand): If there's a reloc, don't calculate the
1653         address because they could be in different sections.
1654
1655 start-sanitize-cygnus
1656 Thu Jan 22 16:10:32 1998  Doug Evans  <devans@seba.cygnus.com>
1657
1658         * cgen.sh: Rewrite to be like simulator's version.
1659         * Makefile.am (cgen): Update call to cgen.sh.
1660         * Makefile.in: Regenerate
1661
1662 end-sanitize-cygnus
1663 Fri Jan 16 15:29:11 1998  Jim Blandy  <jimb@zwingli.cygnus.com>
1664
1665         * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1666         instruction after the 4650's "mul" instruction; nobody's using the
1667         4010 these days.  If object files someday indicate which processor
1668         variant they're intended for, we can do a better job at this.
1669
1670 start-sanitize-r5900
1671 Tue Jan 13 09:21:56 1998  Jeffrey A Law  (law@cygnus.com)
1672
1673         * mips-opc.c (c.lt.s): Add r5900 variant.
1674         (c.le.s): Likewise.
1675
1676 end-sanitize-r5900
1677 Mon Jan 12 14:43:54 1998  Doug Evans  <devans@seba.cygnus.com>
1678
1679         * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1680         table provided entry size.  Use CGEN_INSN_MNEMONIC.
1681         (cgen_parse_keyword): Rewrite.
1682         * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1683         table provided entry size.  Use CGEN_INSN_MASK_BITSIZE.
1684         * cgen-opc.c: Clean up pass over `struct foo' usage.
1685         (cgen_keyword_lookup_value): Handle "" entry.
1686         (cgen_keyword_add): Likewise.
1687 start-sanitize-cygnus
1688         * Makefile.am: Add cgen support.
1689         * Makefile.in: Regenerate.
1690         * configure.in: Add cgen support.
1691         * configure: Regenerate.
1692         * aclocal.m4: Regenerate.
1693         * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1694 end-sanitize-cygnus
1695
1696 Mon Dec 22 12:37:06 1997  Ian Lance Taylor  <ian@cygnus.com>
1697
1698         * mips-opc.c: Add FP_D to s.d instruction flags.
1699
1700 Wed Dec 17 11:38:29 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1701
1702         * m68k-opc.c (halt, pulse): Enable them on the 68060.
1703
1704 start-sanitize-tic80
1705 Tue Dec 16 15:22:53 1997  Fred Fish  <fnf@cygnus.com>
1706
1707         * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1708         PC relative offset forms before the 15 bit forms.  An assembler command
1709         line option now chooses the default.
1710
1711 end-sanitize-tic80
1712 start-sanitize-r5900
1713 Tue Dec 16 13:24:22 1997  Jeffrey A Law  (law@cygnus.com)
1714
1715         * mips-opc.c: Add many missing r5900 instructions.
1716
1717 end-sanitize-r5900
1718 Tue Dec 16 15:22:51 1997  Michael Meissner  <meissner@cygnus.com>
1719
1720         * d30v-opc.c (d30v_opcode_table): Set new flags bits
1721         FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1722
1723 1997-12-15  Brendan Kehoe  <brendan@lisa.cygnus.com>
1724
1725         * configure: Only build libopcodes shared if --enable-shared's value
1726         was `yes', or was set to `*opcodes*'.
1727         * aclocal.m4: Likewise.
1728         * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1729         original source of this bit of code.  It's not clear what the best fix
1730         would be, though.
1731
1732 start-sanitize-r5900
1733 Mon Dec 15 12:43:36 1997  Jeffrey A Law  (law@cygnus.com)
1734
1735         * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1736 end-sanitize-r5900
1737 start-sanitize-tic80
1738 Fri Dec 12 11:57:04 1997  Fred Fish  <fnf@cygnus.com>
1739
1740         * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1741         (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1742         offset forms before the 15 bit forms, to default to the long forms.
1743
1744 end-sanitize-tic80
1745 Fri Dec 12 01:32:30 1997  Richard Henderson  <rth@cygnus.com>
1746
1747         * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1748
1749 Wed Dec 10 17:42:35 1997  Nick Clifton  <nickc@cygnus.com>
1750
1751         * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1752         symbol if none is present.
1753         (print_insn_big_arm):  Prevent examination of stored symbol if
1754         none is present.
1755
1756 Thu Oct 23 21:13:37 1997  Fred Fish  <fnf@cygnus.com>
1757
1758         * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1759
1760 Mon Dec  8 11:21:07 1997  Nick Clifton  <nickc@cygnus.com>
1761
1762         * disassemble.c: Remove disasm_symaddr() function.
1763
1764         * arm-dis.c: Use info->symbol instead of info->flags to determine
1765         if disassmbly should be in Thumb or Arm mode.
1766
1767 Tue Dec  2 09:54:27 1997  Nick Clifton  <nickc@cygnus.com>
1768
1769         * arm-dis.c: Add support for disassembling Thumb opcodes.
1770         (print_insn_thumb): New function.
1771
1772         * disassemble.c (disasm_symaddr): New function.
1773
1774         * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1775         (thumb_opcodes): Table of Thumb opcodes.
1776
1777 Mon Dec  1 12:25:57 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1778
1779         * m68k-opc.c (btst): Change Dd@s to Dd;b.
1780
1781         * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1782         and 'v' as operand types.
1783
1784 Mon Dec  1 11:56:50 1997  Ian Lance Taylor  <ian@cygnus.com>
1785
1786         * m68k-opc.c: Add argument for lpstop.  From Olivier Carmona
1787         <olivier.carmona@di.epfl.ch>.
1788         * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1789         which has a two word opcode with a one word argument.
1790
1791 Sun Nov 23 22:25:21 1997  Michael Meissner  <meissner@cygnus.com>
1792
1793         * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1794         unsigned, not signed.
1795         (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1796
1797 Wed Nov 19 17:42:35 1997  Richard Henderson  <rth@cygnus.com>
1798
1799         * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1800         * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1801         (ftrv): Slay the cut-and-paste monster.
1802
1803 Tue Nov 18 23:10:03 1997  J"orn Rennecke  <amylaar@cygnus.co.uk>
1804
1805         * d10v-dis.c (print_operand):
1806         Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1807
1808 Tue Nov 18 18:45:14 1997  J"orn Rennecke  <amylaar@cygnus.co.uk>
1809
1810         * d10v-opc.c (OPERAND_FLAG): Split into:
1811         (OPERAND_FFLAG, OPERAND_CFLAG) .
1812         (FSRC): Split into:
1813         (FFSRC, CFSRC).
1814
1815 Thu Nov 13 11:05:33 1997  Gavin Koch  <gavin@cygnus.com>
1816
1817         * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1818         field for all INSN_MACRO's.
1819         * mips16-opc.c: same
1820
1821 Wed Nov 12 10:16:57 1997  Gavin Koch  <gavin@cygnus.com>
1822
1823         * mips-opc.c (sync,cache): These are 3900 insns.
1824
1825 Tue Nov 11 23:53:41 1997  J"orn Rennecke <amylaar@cygnus.co.uk>
1826
1827         sh-opc.h (sh_table): Remove ftst/nan.
1828
1829 start-sanitize-cygnus
1830 Mon Nov  3 13:23:15 1997  Ken Raeburn  <raeburn@cygnus.com>
1831
1832         * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1833         (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1834         last.
1835         * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1836
1837 end-sanitize-cygnus
1838 start-sanitize-tx49
1839 Wed Oct 29 15:10:56 1997  Gavin Koch  <gavin@cygnus.com>
1840
1841         * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1842         Add tx49 insns and configury.
1843
1844 end-sanitize-tx49
1845 Tue Oct 28 17:59:32 1997  Ken Raeburn  <raeburn@cygnus.com>
1846
1847         * mips-opc.c (ffc, ffs): Fix mask.
1848
1849 Tue Oct 28 16:34:54 1997  Michael Meissner  <meissner@cygnus.com>
1850
1851         * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1852         control registers.
1853
1854 Mon Oct 27 22:34:03 1997  Ken Raeburn  <raeburn@cygnus.com>
1855
1856         * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1857 start-sanitize-cygnus
1858         Added VR5400 instructions.
1859         (N5): New cpu-id macro.
1860 end-sanitize-cygnus
1861         (WR_HILO, RD_HILO, MOD_HILO): New macros.
1862
1863 Mon Oct 27 22:34:03 1997  Ken Raeburn  <raeburn@cygnus.com>
1864
1865         * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1866         (WR_HILO, RD_HILO, MOD_HILO): New macros.
1867
1868 Thu Oct 23 14:57:58 1997  Nick Clifton  <nickc@cygnus.com>
1869
1870         * v850-dis.c (disassemble): Replace // with /* ... */
1871
1872 Wed Oct 22 17:33:21 1997  Richard Henderson  <rth@cygnus.com>
1873
1874         * sparc-opc.c: Add wr & rd for v9a asr's.
1875         * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1876         (v9a_asr_reg_names): New variable.
1877         Patch from David Miller <davem@vger.rutgers.edu>.
1878
1879 Wed Oct 22 17:18:02 1997  Richard Henderson  <rth@cygnus.com>
1880
1881         * sparc-opc.c (v9notv9a): New insn type.
1882         (IMPDEP): Move to the end to not conflict with edge8 et al.
1883         Patch from David Miller <davem@vger.rutgers.edu>.
1884
1885 Fri Oct 17 13:18:53 1997  Gavin Koch  <gavin@cygnus.com>
1886
1887         * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1888
1889 Thu Oct 16 11:55:20 1997  Gavin Koch  <gavin@cygnus.com>
1890
1891         * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1892
1893 Tue Oct 14 16:10:31 1997  Nick Clifton  <nickc@cygnus.com>
1894
1895         * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1896         of disassemble_info structure to determine if an overlay address
1897         has a matching symbol in low memory.
1898
1899         * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1900         new symbol_at_address_func field in disassemble_info structure.
1901
1902 Fri Oct 10 16:44:52 1997  Nick Clifton  <nickc@cygnus.com>
1903
1904         * v850-opc.c (extract_d22): Use signed arithmatic.
1905
1906 Tue Oct  7 23:40:43 1997  Gavin Koch  <gavin@cygnus.com>
1907
1908         * mips-opc.c: Three op mult is not an ISA insn.
1909
1910 Tue Oct  7 23:37:21 1997  Gavin Koch  <gavin@cygnus.com>
1911
1912         * mips-opc.c: Fix formatting.
1913
1914 Fri Oct  3 17:26:54 1997  Ian Lance Taylor  <ian@cygnus.com>
1915
1916         * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1917         than assuming that char is signed.  Explicitly sign extend 16 bit
1918         values, rather than assuming that short is 16 bits.
1919         (OP_sI, OP_J, OP_DIR): Likewise.
1920
1921 start-sanitize-v850e
1922 Thu Oct  2 13:36:45 1997  Nick Clifton  <nickc@cygnus.com>
1923
1924         * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1925         system registers.
1926
1927 end-sanitize-v850e
1928 Wed Oct  1 16:58:54 1997  Nick Clifton  <nickc@cygnus.com>
1929
1930         * v850-opc.c: Fix typo in comment.
1931
1932         * v850-dis.c (disassemble): Add test of processor type when
1933         determining opcodes.
1934
1935 Wed Oct  1 14:10:20 1997  Ian Lance Taylor  <ian@cygnus.com>
1936
1937         * configure.in: Use a diversion to set enable_shared before the
1938         arguments are parsed.
1939         * configure: Rebuild.
1940
1941 Thu Sep 25 13:04:59 1997  Ian Lance Taylor  <ian@cygnus.com>
1942
1943         * m68k-opc.c (TBL1): Use ! rather than `.
1944         * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1945
1946 Wed Sep 24 11:29:35 1997  Ian Lance Taylor  <ian@cygnus.com>
1947
1948         * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1949
1950         * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1951
1952         * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1953         for mcf5200.
1954
1955         * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1956         * aclocal.m4: Rebuild with new libtool.
1957         * configure: Rebuild.
1958
1959 start-sanitize-v850e
1960 Fri Sep 19 11:45:49 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1961
1962         * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1963
1964 end-sanitize-v850e
1965 Thu Sep 18 11:21:43 1997  Doug Evans  <dje@canuck.cygnus.com>
1966
1967         * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1968
1969 Tue Sep 16 15:18:20 1997  Nick Clifton  <nickc@cygnus.com>
1970
1971         * v850-opc.c (v850_opcodes): Further rearrangements.
1972
1973 Tue Sep 16 16:12:11 1997  Ken Raeburn  <raeburn@cygnus.com>
1974
1975         * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1976
1977 Tue Sep 16 09:48:50 1997  Nick Clifton  <nickc@cygnus.com>
1978
1979         * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1980         parser to work.
1981
1982 Tue Sep 16 10:01:00 1997  Gavin Koch  <gavin@cygnus.com>
1983
1984         * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1985 start-sanitize-tx19
1986         * mips16-opc.c: Added mips16 sdbbp.
1987 end-sanitize-tx19
1988
1989 Mon Sep 15 18:31:52 1997  Nick Clifton  <nickc@cygnus.com>
1990
1991         * v850-opc.c: Initialise processors field of v850_opcode structure.
1992
1993 Wed Aug 27 21:42:39 1997  Ken Raeburn  <raeburn@cygnus.com>
1994
1995         Merge changes from Martin Hunt:
1996
1997         * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1998
1999         * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
2000         (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
2001         rot2h, sra2h, and srl2h to use new SHORT_A5S format.
2002
2003         * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
2004
2005         * d30v-dis.c (print_insn): First operand of d*i (delayed
2006         branch) instructions is relative.
2007
2008         * d30v-opc.c (d30v_opcode_table): Change form for repeati.
2009         (d30v_operand_table): Add IMM6S3 type.
2010         (d30v_format_table): Change SHORT_D2. Add LONG_Db.
2011
2012         * d30v-dis.c: Fix bug with ".s" and ".l" extensions
2013         and cmp instructions.
2014
2015         * d30v-opc.c: Correct entries for repeat*, and sat*.
2016         Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
2017         types. Correct several formats.
2018
2019         * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
2020
2021         * d30v-opc.c (pre_defined_registers): Change control registers.
2022
2023         * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
2024         SHORT_C2.  Manual was incorrect.
2025
2026         * d30v-dis.c (lookup_opcode):  Return value now indicates
2027         if an opcode has a short and a long form.  Used for deciding
2028         to append a ".s" or ".l".
2029         (print_insn): Append a ".s" to an instruction if it is
2030         the short form and ".l" if it is a long form. Do not append
2031         anything if the instruction has only one possible size.
2032
2033         * d30v-opc.c: Change mulx2h to require an even register.
2034         New form: SHORT_A2; a SHORT_A form that needs an even
2035         register as the first operand.
2036
2037         * d30v-dis.c (print_insn_d30v): Fix problem where the last
2038         instruction was not being disassembled if there were an odd
2039         number of instructions.
2040
2041         * d30v-opc.c (SHORT_M2, LONG_M2):  Two new forms.
2042
2043 start-sanitize-v850e
2044 Fri Sep 12 11:43:54 1997  Nick Clifton  <nickc@cygnus.com>
2045
2046         * v850-dis.c (disassemble): Improved display of register lists.
2047
2048 end-sanitize-v850e
2049 Thu Sep 11 17:35:10 1997  Doug Evans  <dje@canuck.cygnus.com>
2050
2051         * sparc-opc.c (sparc_opcodes): Fix assembler args to
2052         fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
2053         fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
2054         fandnot1s, fandnot2s.
2055
2056 Tue Sep  9 10:03:49 1997  Doug Evans  <dje@canuck.cygnus.com>
2057
2058         * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
2059
2060 Mon Sep  8 14:06:59 1997  Doug Evans  <dje@canuck.cygnus.com>
2061
2062         * cgen-asm.c (cgen_parse_address): New argument resultp.
2063         All callers updated.
2064         * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
2065
2066 Tue Sep  2 18:39:08 1997  Jeffrey A Law  (law@cygnus.com)
2067
2068         * mn10200-dis.c (disassemble): PC relative instructions are
2069         relative to the next instruction, not the current instruction.
2070
2071 Tue Sep  2 15:41:55 1997  Nick Clifton  <nickc@cygnus.com>
2072
2073         * v850-dis.c (disassemble): Only signed extend values that are not
2074         returned by extract functions.
2075         Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
2076
2077 Tue Sep  2 15:39:40 1997  Nick Clifton  <nickc@cygnus.com>
2078
2079         * v850-opc.c: Update comments.  Remove use of
2080         V850_OPERAND_ADJUST_SHORT_MEMORY.  Fix several operand patterns.
2081
2082 Tue Aug 26 09:42:28 1997  Nick Clifton  <nickc@cygnus.com>
2083
2084         * v850-opc.c (MOVHI): Immediate parameter is unsigned.
2085
2086 Mon Aug 25 15:58:07 1997  Christopher Provenzano  <proven@cygnus.com>
2087
2088         * configure: Rebuilt with latest devo autoconf for NT support.
2089
2090 Fri Aug 22 10:35:15 1997  Nick Clifton  <nickc@cygnus.com>
2091
2092         * v850-dis.c (disassemble): Use curly brace syntax for register
2093         lists.
2094
2095         * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
2096         where r0 is being used as a destination register.
2097
2098 start-sanitize-v850e
2099 Thu Aug 21 11:09:09 1997  Nick Clifton  <nickc@cygnus.com>
2100
2101         * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
2102 end-sanitize-v850e
2103
2104 Wed Aug 20 00:43:11 1997  J"orn Rennecke <amylaar@cygnus.co.uk>
2105
2106         * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
2107         (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
2108         (sh_table): Likewise.  Add movca.l, ocbi, ocbp, ocbwb.
2109         Add insns to access SGR and DBR.
2110         * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
2111
2112 Tue Aug 19 10:59:59 1997  Richard Henderson  <rth@cygnus.com>
2113
2114         * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
2115
2116 start-sanitize-v850e
2117 Mon Aug 18 11:10:03 1997  Nick Clifton  <nickc@cygnus.com>
2118
2119         * v850-opc.c (v850_opcodes[]): Remove use of flag field.
2120         * v850-opc.c (v850_opcodes[]): Add support for reversed short load
2121         opcodes..
2122
2123 Mon Aug 18 11:08:25 1997  Nick Clifton  <nickc@cygnus.com>
2124
2125         * configure (cgen_files): Add support for v850e target.
2126         * configure.in (cgen_files):  Add support for v850e target.
2127
2128 Mon Aug 18 11:08:25 1997  Nick Clifton  <nickc@cygnus.com>
2129
2130         * configure (cgen_files): Add support for v850ea target.
2131         * configure.in (cgen_files):  Add support for v850ea target.
2132 end-sanitize-v850e
2133
2134 Fri Aug 15 05:17:48 1997  Doug Evans  <dje@canuck.cygnus.com>
2135
2136         * configure.in (bfd_arc_arch): Add.
2137         * configure: Rebuild.
2138         * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
2139         * Makefile.in: Rebuild.
2140         * arc-dis.c, arc-opc.c: New files.
2141         * disassemble.c (ARCH_all): Define ARCH_arc.
2142         (disassembler): Add ARC support.
2143
2144 Wed Aug 13 18:52:11 1997  Nick Clifton  <nickc@cygnus.com>
2145
2146 start-sanitize-v850e
2147         * v850-dis.c (disassemble): Add support for v850EA instructions.
2148
2149         * v850-opc.c (insert_i5div, extract_i5div): New Functions.
2150         (v850_opcodes): Add v850EA instructions.
2151
2152         * v850-dis.c (disassemble): Add support for v850E instructions.
2153
2154         * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
2155         extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
2156         insert_spe, extract_spe): New Functions.
2157         (v850_opcodes): Add v850E instructions.
2158 end-sanitize-v850e
2159
2160         * v850-opc.c: Reorganised and re-layed out to improve readability
2161         and portability.
2162
2163 Tue Aug  5 23:09:31 1997  Ian Lance Taylor  <ian@cygnus.com>
2164
2165         * configure: Rebuild with autoconf 2.12.1.
2166
2167 Mon Aug  4 12:02:16 1997  Ian Lance Taylor  <ian@cygnus.com>
2168
2169         * aclocal.m4, configure: Rebuild with new automake patches.
2170
2171 Fri Aug  1 13:02:04 1997  Ian Lance Taylor  <ian@cygnus.com>
2172
2173         * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
2174         * acinclude.m4: Just include acinclude.m4 from BFD.
2175         * aclocal.m4, configure: Rebuild.
2176
2177 Thu Jul 31 21:44:42 1997  Ian Lance Taylor  <ian@cygnus.com>
2178
2179         * Makefile.am: New file, based on old Makefile.in.
2180         * acconfig.h: New file.
2181         * acinclude.m4: New file.
2182         * stamp-h.in: New file.
2183         * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
2184         Removed shared library handling; now handled by libtool.  Replace
2185         AC_CONFIG_HEADER with AM_CONFIG_HEADER.  Call AM_MAINTAINER_MODE,
2186         AM_CYGWIN32, and AM_EXEEXT.  Replace AC_PROG_INSTALL with
2187         AM_PROG_INSTALL.  Change all .o files to .lo.  Remove stamp-h
2188         handling in AC_OUTPUT.
2189         * dep-in.sed: Change .o to .lo.
2190         * Makefile.in: Now built with automake.
2191         * aclocal.m4: Now built with aclocal.
2192         * config.in, configure: Rebuild.
2193
2194 Mon Jul 28 21:52:24 1997  Jeffrey A Law  (law@cygnus.com)
2195
2196         * mips-opc.c: Fix typo/thinko in "eret" instruction.
2197
2198 start-sanitize-r5900
2199 Mon Jul 28 22:07:14 1997  Andrew Cagney  <cagney@b1.cygnus.com>
2200
2201         * mips-opc.c: Fix coding of mtsa.
2202
2203 end-sanitize-r5900
2204 Thu Jul 24 13:03:26 1997  Doug Evans  <dje@canuck.cygnus.com>
2205
2206         * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2207         Make array const.
2208         * sparc-dis.c (sorted_opcodes): New static local.
2209         (struct opcode_hash): `opcode' is pointer to const element.
2210         (build_hash): First arg is now table of sorted pointers.
2211         (print_insn_sparc): Sort opcodes by sorting table of pointers.
2212         (compare_opcodes): Update.
2213
2214 Tue Jul 15 12:05:23 1997  Doug Evans  <dje@canuck.cygnus.com>
2215
2216         * cgen-opc.c: #include <ctype.h>.
2217         (hash_keyword_name): New arg `case_sensitive_p'.  Callers updated.
2218         Handle case insensitive hashing.
2219         (hash_keyword_value): Change type of `value' to unsigned int.
2220
2221 Thu Jul 10 12:56:10 1997  Jeffrey A Law  (law@cygnus.com)
2222
2223         * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2224         precision FP, mark it as such.  Likewise for double precision
2225         FP.  Mark ISA1 insns.  Consolidate duplicate opcodes where
2226         possible.
2227 start-sanitize-r5900
2228         (mips_builtin_opcodes): Remove non-existant r5900 instructions
2229 end-sanitize-r5900
2230
2231 start-sanitize-r5900
2232 Thu Jun 26 16:20:27 1997  Jeffrey A Law  (law@cygnus.com)
2233
2234         * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
2235         "pexew" as synonyms for "pintoh", "pexoh", "pexow".
2236
2237 end-sanitize-r5900
2238 Wed Jun 25 15:25:57 1997  Felix Lee  <flee@cirdan.cygnus.com>
2239
2240         * ppc-opc.c (extract_nsi): make unsigned expression signed before
2241         negating it.
2242         (UNUSED): remove one level of parens, so MSVC doesn't choke on
2243         nesting depth when all the macros are expanded.
2244
2245 Tue Jun 17 17:02:17 1997  Ian Lance Taylor  <ian@cygnus.com>
2246
2247         * sparc-opc.c: The fcmp v9a instructions take an integer register
2248         as a destination, not a floating point register.  From Christian
2249         Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2250
2251 Mon Jun 16 14:13:18 1997  Ian Lance Taylor  <ian@cygnus.com>
2252
2253         * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2254         syntax.  From Roman Hodek
2255         <rnhodek@faui22c.informatik.uni-erlangen.de>.
2256
2257         * i386-dis.c (twobyte_has_modrm): Fix pand.
2258
2259 Mon Jun 16 14:08:38 1997  Michael Taylor  <mbt@mit.edu>
2260
2261         * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2262
2263 Tue Jun 10 11:26:47 1997  H.J. Lu  <hjl@gnu.ai.mit.edu>
2264
2265         * arm-dis.c: Add prototypes for arm_decode_shift and
2266         print_insn_arm.
2267
2268 Mon Jun  2 11:39:04 1997  Gavin Koch  <gavin@cygnus.com>
2269
2270         * mips-opc.c: Add r3900 insns.
2271
2272 Tue May 27 15:55:44 1997  Ian Lance Taylor  <ian@cygnus.com>
2273
2274         * sh-dis.c (print_insn_shx): Change relmask to bfd_vma.  Don't
2275         print delay slot instructions on the same line.  When using a PC
2276         relative load, add a comment with the value being loaded if it can
2277         be obtained.
2278
2279 Tue May 27 11:02:08 1997  Alan Modra  <alan@spri.levels.unisa.edu.au>
2280
2281         * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2282         to pushS/popS for segment regs and byte constant so that
2283         pushw/popw printed when in 16 bit data mode.
2284
2285         * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2286         print cbtw, cwtd in 16 bit data mode.
2287         * i386-dis.c (putop): extra case W to support above.
2288
2289         * i386-dis.c (print_insn_x86): print addr32 prefix when given
2290         address size prefix in 16 bit address mode.
2291
2292 Fri May 23 16:47:23 1997  Ian Lance Taylor  <ian@cygnus.com>
2293
2294         * sh-dis.c: Reindent.  Rename local variable fprintf to
2295         fprintf_fn.
2296
2297 Thu May 22 14:06:02 1997  Doug Evans  <dje@canuck.cygnus.com>
2298
2299         * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2300
2301 Tue May 20 11:26:27 1997  Gavin Koch  <gavin@cygnus.com>
2302
2303         * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2304           field membership.
2305         * mips16-opc.c (mip16_opcodes): same.
2306
2307 Mon May 12 15:10:53 1997  Jim Wilson  <wilson@cygnus.com>
2308
2309         * m68k-opc.c (moveb): Change $d to %d.
2310
2311 Mon May  5 14:28:41 1997  Ian Lance Taylor  <ian@cygnus.com>
2312
2313         * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2314         (twobyte_has_modrm): Likewise.
2315         (grps): Likewise.
2316         (OP_MMX, OP_EM, OP_MS): New static functions.
2317
2318         * i386-dis.c: Revert patch of April 4.  The output now matches
2319         what gcc generates.
2320
2321 Fri May  2 12:48:37 1997  Doug Evans  <dje@canuck.cygnus.com>
2322
2323         * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2324         of $simm16.
2325
2326 Thu May  1 15:34:15 1997  Doug Evans  <dje@canuck.cygnus.com>
2327
2328         * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2329
2330 Tue Apr 15 12:40:08 1997  Ian Lance Taylor  <ian@cygnus.com>
2331
2332         * Makefile.in (install): Depend upon installdirs.
2333         (installdirs): New target.
2334
2335 Mon Apr 14 12:13:51 1997  Ian Lance Taylor  <ian@cygnus.com>
2336
2337         From Thomas Graichen <graichen@rzpd.de>:
2338         * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2339         * configure: Rebuild.
2340
2341 Sun Apr 13 17:50:41 1997  Doug Evans  <dje@canuck.cygnus.com>
2342
2343         * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2344         Delete string{,s}.h support.
2345
2346 Thu Apr 10 14:44:56 1997  Doug Evans  <dje@canuck.cygnus.com>
2347
2348         * cgen-asm.c (cgen_parse_operand_fn): New global.
2349         (cgen_parse_{{,un}signed_integer,address}): Update call to
2350         cgen_parse_operand_fn.
2351         (cgen_init_parse_operand): New function.
2352         * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2353         from cgen_asm_init_parse.
2354         (m32r_cgen_assemble_insn): New operand `errmsg'.
2355         Delete call to as_bad, return error message to caller.
2356         (m32r_cgen_asm_hash_keywords): #if 0 out.
2357
2358 Wed Apr  9 12:05:25 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2359
2360         * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2361         not data register.
2362         [case 'J']: Fix typo in register name.
2363
2364 Mon Apr  7 16:48:22 1997  Ian Lance Taylor  <ian@cygnus.com>
2365
2366         * configure.in: Substitute SHLIB_LIBS.
2367         * configure: Rebuild.
2368         * Makefile.in (SHLIB_LIBS): New variable.
2369         ($(SHLIB)): Use $(SHLIB_LIBS).
2370
2371 Mon Apr  7 11:45:44 1997  Doug Evans  <dje@canuck.cygnus.com>
2372
2373         * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2374
2375         * cgen-opc.c (hash_keyword_name): Improve algorithm.
2376
2377         * disassemble.c (disassembler): Handle m32r.
2378
2379 Fri Apr  4 12:29:38 1997  Doug Evans  <dje@canuck.cygnus.com>
2380
2381         * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2382         * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2383         * Makefile.in (CFILES): Add them.
2384         (ALL_MACHINES): Add them.
2385         (dependencies): Regenerate.
2386         * configure.in (cgen_files): New variable.
2387         (bfd_m32r_arch): Add entry.
2388         * configure: Regenerate.
2389
2390 Fri Apr  4 14:04:16 1997  Ian Lance Taylor  <ian@cygnus.com>
2391
2392         * configure.in: Correct file names for bfd_mn10[23]00_arch.
2393         * configure: Rebuild.
2394
2395         * Makefile.in: Rebuild dependencies.
2396
2397         * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2398
2399         * i386-dis.c (float_reg): Swap fsubrp and fsubp.  Swap fdivrp and
2400         fdivp.
2401
2402 Thu Apr  3 13:22:45 1997  Ian Lance Taylor  <ian@cygnus.com>
2403
2404         * Branched binutils 2.8.
2405
2406 Wed Apr  2 12:23:53 1997  Ian Lance Taylor  <ian@cygnus.com>
2407
2408         * m10200-dis.c: Rename from mn10200-dis.c.
2409         * m10200-opc.c: Rename from mn10200-opc.c.
2410         * m10300-dis.c: Rename from mn10300-dis.c
2411         * m10300-opc.c: Rename from mn10300-opc.c.
2412         * Makefile.in: Update accordingly.
2413
2414         * mips16-opc.c: Add mul and dmul macros.
2415
2416 Tue Apr  1 16:27:45 1997  Klaus Kaempf  <kkaempf@progis.de>
2417
2418         * makefile.vms: Update CFLAGS, add clean target.
2419
2420 Fri Mar 28 12:10:09 1997  Ian Lance Taylor  <ian@cygnus.com>
2421
2422         * mips-opc.c: Add "wait".  From Ralf Baechle
2423         <ralf@gnu.ai.mit.edu>.
2424
2425         * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2426         * configure, config.in: Rebuild.
2427         * sysdep.h: Include <stdlib.h> if it exists.
2428         * sparc-dis.c: Include <stdio.h> and "sysdep.h".  Don't include
2429         <string.h>.
2430         * Makefile.in: Rebuild dependencies.
2431
2432 Thu Mar 27 14:24:43 1997  Ian Lance Taylor  <ian@cygnus.com>
2433
2434         * ppc-opc.c: Add PPC 403 instructions and extended opcodes.  From
2435         Andrew Bray <andy@madhouse.demon.co.uk>.
2436
2437         * mips-opc.c: Add cast when setting mips_opcodes.
2438
2439 Tue Mar 25 23:04:00 1997  Stu Grossman  (grossman@critters.cygnus.com)
2440
2441         * v850-dis.c (disassemble):  Fix sign extension problem.
2442         * v850-opc.c (extract_d*):  Fix sign extension problems to make
2443         disassembly calculate branch offsets correctly.
2444
2445 Mon Mar 24 13:22:13 1997  Ian Lance Taylor  <ian@cygnus.com>
2446
2447         * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2448
2449         * mips-opc.c: Add dctr and dctw.
2450
2451 Sun Mar 23 18:08:10 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
2452
2453         * d30v-dis.c (print_insn): Change the way signed constants
2454         are displayed.
2455
2456 Fri Mar 21 14:37:52 1997  Ian Lance Taylor  <ian@cygnus.com>
2457
2458         * Makefile.in (BFD_H): New variable.
2459         (HFILES): New variable.
2460         (CFILES): Add all C files.
2461         (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2462         Delete old dependencies, and build new ones.
2463         * dep-in.sed: New file.
2464
2465 Thu Mar 20 19:03:30 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
2466
2467         * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2468
2469 start-sanitize-coldfire
2470 Wed Mar 19 06:53:58 1997  J.T. Conklin  <jtc@rtl.cygnus.com>
2471
2472         * m68k-opc.c (m68k_opcodes): Provide coldfire division module
2473         instructions.
2474
2475 end-sanitize-coldfire
2476 Tue Mar 18 14:17:03 1997  Jeffrey A Law  (law@cygnus.com)
2477
2478         * mn10200-opc.c: Change "trap" to "syscall".
2479         * mn10300-opc.c: Add new "syscall" instruction.
2480
2481 Mon Mar 17 08:48:03 1997  J.T. Conklin  <jtc@beauty.cygnus.com>
2482
2483         * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2484         mulul insns on the coldfire.
2485
2486 Sat Mar 15 17:13:05 1997  Ian Lance Taylor  <ian@cygnus.com>
2487
2488         * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2489         (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2490         (print_insn_little_arm): Likewise.
2491
2492 Fri Mar 14 15:08:59 1997  Ian Lance Taylor  <ian@cygnus.com>
2493
2494         Based on patches from H.J. Lu <hjl@lucon.org>:
2495         * i386-dis.c (fetch_data): Add prototype.
2496         * m68k-dis.c (fetch_data): Add prototype.
2497         (dummy_print_address): Add prototype.  Make static.
2498         * ppc-opc.c (valid_bo): Add prototype.
2499         * sparc-dis.c (build_hash_table): Add prototype.
2500         (is_delayed_branch, compute_arch_mask): Add prototypes.
2501         (print_insn_sparc): Make several local variables const.
2502         (compare_opcodes): Change arguments to const PTR.  Add prototype.
2503         * sparc-opc.c (arg): Change name field to be const.
2504         (lookup_name, lookup_value): Add prototypes.  Change table and
2505         name parameters to be const.
2506         (sparc_encode_asi): Change name parameter to be const.
2507         (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2508         (sparc_encode_sparclet_cpreg): Likewise.
2509         (sparc_decode_asi): Change return type to be const.
2510         (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2511         (sparc_decode_sparclet_cpreg): Likewise.
2512
2513 Fri Mar  7 10:51:49 1997  Ian Lance Taylor  <ian@cygnus.com>
2514
2515         * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2516         Solaris doesn't like the combined options, and the -f is
2517         unnecessary.
2518         (stamp-tshlink, install): Likewise.
2519
2520 Thu Mar  6 16:51:11 1997  Jeffrey A Law  (law@cygnus.com)
2521
2522         * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2523         as relaxable.
2524
2525 Tue Mar  4 06:10:36 1997  J.T. Conklin  <jtc@cygnus.com>
2526
2527         * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2528
2529 Mon Mar  3 07:45:20 1997  J.T. Conklin  <jtc@cygnus.com>
2530
2531         * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2532         the mc68000.
2533
2534 Thu Feb 27 14:04:32 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
2535
2536         * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2537
2538 start-sanitize-tic80
2539 Thu Feb 27 11:36:41 1997  Michael Meissner  <meissner@cygnus.com>
2540
2541         * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2542
2543 Wed Feb 26 15:34:48 1997  Michael Meissner  <meissner@cygnus.com>
2544
2545         * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2546
2547 end-sanitize-tic80
2548 Wed Feb 26 13:38:30 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2549
2550         * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2551         floatformat_to_double to make portable.
2552         (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2553         precision float.
2554
2555 Mon Feb 24 19:26:12 1997  Dawn Perchik  <dawn@cygnus.com>
2556
2557         * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2558         and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2559
2560 Mon Feb 24 15:19:01 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
2561
2562         * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2563         d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2564
2565 start-sanitize-tic80
2566 Mon Feb 24 14:33:26 1997  Fred Fish  <fnf@cygnus.com>
2567
2568         * tic80-opc.c (LSI_SCALED): Renamed from this ...
2569         (OFF_SL_BR_SCALED): ... to this, and added the flag
2570         TIC80_OPERAND_BASEREL to the flags word.
2571         (tic80_opcodes): Replace all occurances of LSI_SCALED with
2572         OFF_SL_BR_SCALED.
2573
2574 end-sanitize-tic80
2575 Sat Feb 22 21:25:00 1997  Dawn Perchik  <dawn@cygnus.com>
2576
2577         * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2578         Change mips_opcodes from const array to a pointer,
2579         and change bfd_mips_num_opcodes from const int to int,
2580         so that we can increase the size of the mips opcodes table
2581         dynamically.
2582
2583 start-sanitize-tic80
2584 Sat Feb 22 21:03:47 1997  Fred Fish  <fnf@cygnus.com>
2585
2586         * tic80-opc.c (tic80_predefined_symbols): Revert change to
2587         store BITNUM values in the table in one's complement form
2588         to match behavior when assembler is given a raw numeric
2589         value for a BITNUM operand.
2590         * tic80-dis.c (print_operand_bitnum): Ditto.
2591
2592 end-sanitize-tic80
2593 Fri Feb 21 16:31:18 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
2594
2595         * d30v-opc.c: Removed references to FLAG_X.
2596
2597 Wed Feb 19 14:51:20 1997  Ian Lance Taylor  <ian@cygnus.com>
2598
2599         * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2600
2601 Tue Feb 18 17:43:43 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
2602
2603         * Makefile.in: Added d30v object files.
2604         * configure: (bfd_d30v_arch) Rebuilt.
2605         * configure.in: (bfd_d30v_arch) Added new case.
2606         * d30v-dis.c: New file.
2607         * d30v-opc.c: New file.
2608         * disassemble.c (disassembler) Add entry for d30v.
2609
2610 start-sanitize-tic80
2611 Tue Feb 18 16:32:08 1997  Fred Fish  <fnf@cygnus.com>
2612
2613         * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2614         representations for the floating point BITNUM values.
2615
2616 Fri Feb 14 12:14:05 1997  Fred Fish  <fnf@cygnus.com>
2617
2618         * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2619         in the table in one's complement form, as they appear in the
2620         actual instruction.
2621         (tic80_symbol_to_value): Use macros to access predefined
2622         symbol fields.
2623         (tic80_value_to_symbol): Ditto.
2624         (tic80_next_predefined_symbol): New function.
2625         * tic80-dis.c (print_operand_bitnum): Remove code that did
2626         one's complement for BITNUM values.
2627
2628 end-sanitize-tic80
2629 start-sanitize-r5900
2630 Fri Feb 14 13:56:51 1997  Gavin Koch  <gavin@cygnus.com>
2631
2632         * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
2633
2634 end-sanitize-r5900
2635 Thu Feb 13 21:56:51 1997  Klaus Kaempf  <kkaempf@progis.de>
2636
2637         * makefile.vms: Remove 8 bit characters.  Update to latest
2638         gcc release.
2639
2640 Thu Feb 13 20:41:22 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
2641
2642         * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2643
2644 Thu Feb 13 16:30:02 1997  Jeffrey A Law  (law@cygnus.com)
2645
2646         * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2647         (IMM24_PCREL): Likewise.
2648
2649 Thu Feb 13 13:28:43 1997  Ian Lance Taylor  <ian@cygnus.com>
2650
2651         * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2652         address for an extended PC relative instruction that is not a
2653         branch.
2654
2655 Wed Feb 12 12:27:40 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2656
2657         * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2658         bytes_per_line.
2659
2660 start-sanitize-tic80
2661 Tue Feb 11 16:36:31 1997  Fred Fish  <fnf@cygnus.com>
2662
2663         * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2664         (tic80_opcodes): Sort entries so that long immediate forms
2665         come after short immediate forms, making it easier for
2666         assembler to select the right one for a given operand.
2667
2668 end-sanitize-tic80
2669 Tue Feb 11 15:26:47 1997  Ian Lance Taylor  <ian@cygnus.com>
2670
2671         * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2672         display_endian.
2673         (print_insn_mips16): Likewise.
2674
2675 start-sanitize-r5900
2676 Fri Feb  7 11:12:44 1997  Gavin Koch  <gavin@cygnus.com>
2677
2678         * mips-opc.c: add r5900.
2679
2680 end-sanitize-r5900
2681 start-sanitize-tic80
2682 Mon Feb 10 10:12:41 1997  Fred Fish  <fnf@cygnus.com>
2683
2684         * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2685         a symbol class that restricts translation to just that
2686         class (general register, condition code, etc).
2687
2688 Thu Feb  6 17:34:09 1997  Fred Fish  <fnf@cygnus.com>
2689
2690         * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2691         and REG_DEST_E for register operands that have to be
2692         an even numbered register.  Add REG_FPA for operands that
2693         are one of the floating point accumulator registers.
2694         Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2695         (tic80_opcodes): Change entries that need even numbered
2696         register operands to use the new operand table entries.
2697         Add "or" entries that are identical to "or.tt" entries.
2698
2699 end-sanitize-tic80
2700 Wed Feb  5 11:12:44 1997  Ian Lance Taylor  <ian@cygnus.com>
2701
2702         * mips16-opc.c: Add new cases of exit instruction for
2703         disassembler.
2704         * mips-dis.c (print_mips16_insn_arg): Display floating point
2705         registers in operands of exit instruction.  Print `$' before
2706         register names in operands of entry and exit instructions.
2707
2708 start-sanitize-tic80
2709 Thu Jan 30 14:09:03 1997  Fred Fish  <fnf@cygnus.com>
2710
2711         * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2712         pairs for all predefined symbols recognized by the assembler.
2713         Also used by the disassembling routines.
2714         (tic80_symbol_to_value): New function.
2715         (tic80_value_to_symbol): New function.
2716         * tic80-dis.c (print_operand_control_register,
2717         print_operand_condition_code, print_operand_bitnum):
2718         Remove private tables and use tic80_value_to_symbol function.
2719
2720 end-sanitize-tic80
2721 Thu Jan 30 11:30:45 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
2722
2723         * d10v-dis.c (print_operand): Change address printing
2724         to correctly handle PC wrapping.  Fixes PR11490.
2725
2726 Wed Jan 29 09:39:17 1997  Jeffrey A Law  (law@cygnus.com)
2727
2728         * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2729         branches relaxable.
2730
2731 Tue Jan 28 15:57:34 1997  Ian Lance Taylor  <ian@cygnus.com>
2732
2733         * mips-dis.c (print_insn_mips16): Set insn_info information.
2734         (print_mips16_insn_arg): Likewise.
2735
2736         * mips-dis.c (print_insn_mips16): Better handling of an extend
2737         opcode followed by an instruction which can not be extended.
2738
2739 Fri Jan 24 12:08:21 1997  J.T. Conklin  <jtc@cygnus.com>
2740
2741         * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2742         coldfire moveb instruction to not allow an address register as
2743         destination.  Although the documentation does not indicate that
2744         this is invalid, experiments uncovered unexpected behavior.
2745         Added a comment explaining the situation.  Thanks to Andreas
2746         Schwab for pointing this out to me.
2747
2748 start-sanitize-tic80
2749 Wed Jan 22 20:13:51 1997  Fred Fish  <fnf@cygnus.com>
2750
2751         * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2752         entries are presorted so that entries with the same mnemonic are
2753         adjacent to each other in the table.  Sort the entries for each
2754         instruction so that this is true.
2755
2756 end-sanitize-tic80
2757 Mon Jan 20 12:48:57 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2758
2759         * m68k-dis.c: Include <libiberty.h>.
2760         (print_insn_m68k): Sort the opcode table on the most significant
2761         nibble of the opcode.
2762
2763 start-sanitize-tic80
2764 Sat Jan 18 15:15:05 1997  Fred Fish  <fnf@cygnus.com>
2765
2766         * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2767         "vsub", "vst", "xnor", and "xor" instructions.
2768         (V_a1): Renamed from V_a, msb of accumulator reg number.
2769         (V_a0): Add macro, lsb of accumulator reg number.
2770
2771 Fri Jan 17 18:24:31 1997  Fred Fish  <fnf@cygnus.com>
2772
2773         * tic80-dis.c (print_insn_tic80): Broke excessively long
2774         function up into several smaller ones and arranged for
2775         the instruction printing function to be callable recursively
2776         to print vector instructions that have both a load and a
2777         math instruction packed into a single opcode.
2778         * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2779         to explain why it comes after the other vector opcodes.
2780
2781 end-sanitize-tic80
2782 Fri Jan 17 16:19:15 1997  J.T. Conklin  <jtc@beauty.cygnus.com>
2783
2784         * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2785         move insns to handle immediate operands.
2786
2787 Thu Jan 17 16:19:00 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2788
2789         * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2790         fix operand mask in the "moveml" entries for the coldfire.
2791
2792 start-sanitize-tic80
2793 Thu Jan 16 20:54:40 1997  Fred Fish  <fnf@cygnus.com>
2794
2795         * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2796         New macros for building vector instruction opcodes.
2797         (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2798         FMT_LI, which were unused.  The field is now a flags field.
2799         Remove some opcodes that are possible, but illegal, such
2800         as long immediate instructions with doubles for immediate
2801         values.  Add "vadd" and "vld" instructions.
2802
2803 Wed Jan 15 18:59:51 1997  Fred Fish  <fnf@cygnus.com>
2804
2805         * tic80-opc.c (tic80_operands): Reorder some table entries to make
2806         the order more logical.  Move the shift alias instructions ("rotl",
2807         "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2808         interspersed with the regular sr.x and sl.x instructions.  Add
2809         and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2810         "sub", "subu", "swcr", and "trap".
2811
2812 Tue Jan 14 19:42:50 1997  Fred Fish  <fnf@cygnus.com>
2813
2814         * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2815         (OFF_SL_PC): Renamed from OFF_SL.
2816         (OFF_SS_BR): New operand type for base relative operand.
2817         (OFF_SL_BR): New operand type for base relative operand.
2818         (REG_BASE): New operand type for base register operand.
2819         (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2820         "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2821         "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2822         instructions.
2823         * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2824         10 char field, padded with spaces on rhs, rather than a string
2825         followed by a tab.  Use renamed TIC80_OPERAND_PCREL flag bit rather
2826         than old TIC80_OPERAND_RELATIVE.  Add support for new
2827         TIC80_OPERAND_BASEREL flag bit.
2828
2829 Mon Jan 13 15:58:56 1997  Fred Fish  <fnf@cygnus.com>
2830
2831         * tic80-dis.c (print_insn_tic80): Print floating point operands
2832         as floats.
2833         * tic80-opc.c (SPFI): Add single precision floating point
2834         immediate operand type.
2835         (ROTATE): Add rotate operand type for shifts.
2836         (ENDMASK): Add for shifts.
2837         (n): Macro for the 'n' bit.
2838         (i): Macro for the 'i' bit.
2839         (PD): Macro for the 'PD' field.
2840         (P2): Macro for the 'P2' field.
2841         (P1): Macro for the 'P1' field.
2842         (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2843         "fcmp", and "fdiv".
2844
2845 end-sanitize-tic80
2846 Mon Jan  6 15:06:55 1997  Jeffrey A Law  (law@cygnus.com)
2847
2848         * mn10200-dis.c (disassemble): Mask off unwanted bits after
2849         adding in current address for pc-relative operands.
2850
2851 start-sanitize-tic80
2852 Mon Jan  6 10:56:25 1997  Fred Fish  <fnf@cygnus.com>
2853
2854         * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2855         (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2856         * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2857         changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2858         (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2859         REG_BASE_M_SI, REG_BASE_M_LI respectively.
2860         (REG_SCALED, LSI_SCALED): New operand types.
2861         (E): New macro for 'E' bit at bit 27.
2862         (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2863         opcodes, including the various size flavors (b,h,w,d) for
2864         the direct load and store instructions.
2865
2866 Sun Jan  5 12:18:14 1997  Fred Fish  <fnf@cygnus.com>
2867
2868         * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2869         in an instruction.
2870         * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2871         Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2872         * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2873         (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2874         (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2875         masks with "MASK_* & ~M_*" to get the M bit reset.
2876         (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2877
2878 Sat Jan  4 19:05:05 1997  Fred Fish  <fnf@cygnus.com>
2879
2880         * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2881         correctly.  Add support for printing TIC80_OPERAND_BITNUM and
2882         TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2883         form.
2884         * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2885         CC, SICR, and LICR table entries.
2886         (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2887         "bcnd", and "brcr" opcodes.
2888
2889 end-sanitize-tic80
2890 Fri Jan  3 18:32:11 1997  Fred Fish  <fnf@cygnus.com>
2891
2892         * ppc-opc.c (powerpc_operands): Make comment match the
2893         actual fields (no shift field).
2894         * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2895 start-sanitize-tic80
2896         * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2897         partial implementation, work in progress.
2898         * tic80-opc.c (tic80_operands): Begin construction operands table.
2899         (tic80_opcodes): Continue populating opcodes table and start
2900         filling in the operand indices.
2901         (tic80_num_opcodes): Add this.
2902 end-sanitize-tic80
2903
2904 Fri Jan  3 12:13:52 1997  Ian Lance Taylor  <ian@cygnus.com>
2905
2906         * m68k-opc.c: Add #B case for moveq.
2907
2908 Thu Jan  2 12:14:29 1997  Jeffrey A Law  (law@cygnus.com)
2909
2910         * mn10300-dis.c (disassemble): Make sure all variables are initialized
2911         before they are used.
2912
2913 Tue Dec 31 12:20:38 1996  Jeffrey A Law  (law@cygnus.com)
2914
2915         * v850-opc.c (v850_opcodes): Put curly-braces around operands
2916         for "breakpoint" instruction.
2917
2918 Tue Dec 31 15:38:13 1996  Ian Lance Taylor  <ian@cygnus.com>
2919
2920         * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2921         (dep): Use ALL_CFLAGS rather than CFLAGS.
2922
2923 Tue Dec 31 15:09:16 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
2924
2925         * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2926         flag.
2927
2928 Mon Dec 30 17:02:11 1996  Fred Fish  <fnf@cygnus.com>
2929
2930         * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2931 start-sanitize-tic80
2932         (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2933 end-sanitize-tic80
2934
2935 Mon Dec 30 11:38:01 1996  Ian Lance Taylor  <ian@cygnus.com>
2936
2937         * mips16-opc.c: Add "abs".
2938
2939 start-sanitize-tic80
2940 Sun Dec 29 10:58:22 1996  Fred Fish  <fnf@cygnus.com>
2941
2942         * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2943         * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2944         (disassembler): Add bfd_arch_tic80 support to set disassemble
2945         to print_insn_tic80.
2946         * tic80-dis.c (print_insn_tic80): Add stub.
2947
2948 Fri Dec 27 22:30:57 1996  Fred Fish  <fnf@cygnus.com>
2949
2950         * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2951         * configure: Regenerate with autoconf.
2952         * tic80-dis.c: Add file.
2953         * tic80-opc.c: Add file.
2954
2955 end-sanitize-tic80
2956 Fri Dec 20 14:30:19 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2957
2958         * d10v-opc.c (pre_defined_registers):  Add cr[0-15], dpc, dpsw, link.
2959
2960 Mon Dec 16 13:00:15 1996  Jeffrey A Law  (law@cygnus.com)
2961
2962         * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2963         (mn10200_opcodes): Use it for some logicals and btst insns.
2964         Add "break" and "trap" instructions.
2965
2966         * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2967
2968         * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2969
2970 Sat Dec 14 22:36:20 1996  Ian Lance Taylor  <ian@cygnus.com>
2971
2972         * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2973         relative load or add now depends upon whether the instruction is
2974         in a delay slot.
2975
2976 Wed Dec 11 09:23:46 1996  Jeffrey A Law  (law@cygnus.com)
2977
2978         * mn10200-dis.c: Finish writing disassembler.
2979         * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2980         Fix mask for "jmp (an)".
2981
2982         * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2983         handle endianness issues for mn10300.
2984
2985         * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2986
2987 Tue Dec 10 12:08:05 1996  Jeffrey A Law  (law@cygnus.com)
2988
2989         * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2990         instruction.  Fix opcode field for "movb (imm24),dn".
2991
2992         * mn10200-opc.c (mn10200_operands): Fix insertion position
2993         for DI operand.
2994
2995 Mon Dec  9 16:42:43 1996  Jeffrey A Law  (law@cygnus.com)
2996
2997         * mn10200-opc.c: Create mn10200 opcode table.
2998         * mn10200-dis.c: Flesh out mn10200 disassembler.  Not ready,
2999         but moving along nicely.
3000
3001 Sun Dec  8 04:28:31 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3002
3003         * Makefile.in (ALL_MACHINES):  Add mips16-opc.o.
3004
3005 Fri Dec  6 16:47:40 1996  J.T. Conklin  <jtc@rhino.cygnus.com>
3006
3007         * m68k-opc.c (m68k_opcodes): Revert change to use < and >
3008         specifiers for fmovem* instructions.
3009
3010 Fri Dec  6 14:48:09 1996  Jeffrey A Law  (law@cygnus.com)
3011
3012         * mn10300-dis.c (disassemble): Remove '$' register prefixing.
3013
3014 Fri Dec  6 17:34:39 1996  Ian Lance Taylor  <ian@cygnus.com>
3015
3016         * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
3017         with dsrl.
3018
3019 Fri Dec  6 14:48:09 1996  Jeffrey A Law  (law@cygnus.com)
3020
3021         * mn10300-opc.c: Add some comments explaining the various
3022         operands and such.
3023
3024         * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
3025
3026 Thu Dec  5 12:09:48 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
3027
3028         * m68k-dis.c (print_insn_arg): Handle new < and > operand
3029         specifiers.
3030
3031         * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3032         operand specifiers in fmovm* instructions.
3033
3034 Wed Dec  4 14:52:18 1996  Ian Lance Taylor  <ian@cygnus.com>
3035
3036         * ppc-opc.c (insert_li): Give an error if the offset has the two
3037         least significant bits set.
3038
3039 Wed Nov 27 13:09:01 1996  Ian Lance Taylor  <ian@cygnus.com>
3040
3041         * mips-dis.c (print_insn_mips16): Separate the instruction from
3042         the arguments with a tab, not a space.
3043
3044 Tue Nov 26 13:24:17 1996  Jeffrey A Law  (law@cygnus.com)
3045
3046         * mn10300-dis.c (disasemble): Finish conversion to '$' as
3047         register prefix.
3048
3049         * mn10300-opc.c (mn10300_opcodes): Fix mask field for
3050         mov am,(imm32,sp).
3051
3052 Tue Nov 26 10:53:21 1996  Ian Lance Taylor  <ian@cygnus.com>
3053
3054         * configure: Rebuild with autoconf 2.12.
3055
3056         Add support for mips16 (16 bit MIPS implementation):
3057         * mips16-opc.c: New file.
3058         * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
3059         (mips16_reg_names): New static array.
3060         (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
3061         after seeing a 16 bit symbol.
3062         (print_insn_little_mips): Likewise.
3063         (print_insn_mips16): New static function.
3064         (print_mips16_insn_arg): New static function.
3065         * mips-opc.c: Add jalx instruction.
3066         * Makefile.in (mips16-opc.o): New target.
3067         * configure.in: Use mips16-opc.o for bfd_mips_arch.
3068         * configure: Rebuild.
3069
3070 Mon Nov 25 16:15:17 1996  J.T. Conklin  <jtc@cygnus.com>
3071
3072         * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3073         operand specifiers in *save, *restore and movem* instructions.
3074
3075         * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
3076         the coldfire.
3077
3078         * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
3079         register operands for immediate arithmetic, not, neg, negx, and
3080         set according to condition instructions.
3081
3082         * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
3083         specifier of the effective-address operand in immediate forms of
3084         arithmetic instructions.  The specifier for the immediate operand
3085         notes how and where the constant will be stored.
3086
3087 Mon Nov 25 11:17:01 1996  Jeffrey A Law  (law@cygnus.com)
3088
3089         * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
3090         opcode.
3091
3092         * mn10300-dis.c (disassemble): Use '$' instead of '%' for
3093         register prefix.
3094
3095         * mn10300-dis.c (disassemble): Prefix registers with '%'.
3096
3097 Wed Nov 20 10:37:13 1996  Jeffrey A Law  (law@cygnus.com)
3098
3099         * mn10300-dis.c (disassemble): Handle register lists.
3100
3101         * mn10300-opc.c: Fix handling of register list operand for
3102         "call", "ret", and "rets" instructions.
3103
3104         * mn10300-dis.c (disassemble): Print PC-relative and memory
3105         addresses symbolically if possible.
3106         * mn10300-opc.c: Distinguish between absolute memory addresses,
3107         pc-relative offsets & random immediates.
3108
3109         * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
3110         in 7 byte insns.
3111         (disassemble): Handle SPLIT and EXTENDED operands.
3112
3113 Tue Nov 19 13:33:01 1996  Jeffrey A Law  (law@cygnus.com)
3114
3115         * mn10300-dis.c: Rough cut at printing some operands.
3116
3117         * mn10300-dis.c: Start working on disassembler support.
3118         * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
3119
3120         * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
3121         list.
3122         (mn10300_opcodes): Use REGS for register list in "movm" instructions.
3123
3124 Mon Nov 18 15:20:35 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
3125
3126         * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
3127
3128 Fri Nov 15 13:43:19 1996  Jeffrey A Law  (law@cygnus.com)
3129
3130         * mn10300-opc.c (mn10300_opcodes): Demand parens around
3131         register argument is calls and jmp instructions.
3132
3133 Thu Nov  7 00:26:05 1996  Jeffrey A Law  (law@cygnus.com)
3134
3135         * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
3136         getx operand.  Fix opcode for mulqu imm,dn.
3137
3138 Wed Nov  6 13:42:32 1996  Jeffrey A Law  (law@cygnus.com)
3139
3140         * mn10300-opc.c (mn10300_operands): Hijack "bits" field
3141         in MN10300_OPERAND_SPLIT operands for how many bits
3142         appear in the basic insn word.  Add IMM32_HIGH24,
3143         IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
3144         (mn10300_opcodes): Use new operands as needed.
3145
3146         * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
3147         for bset, bclr, btst instructions.
3148         (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
3149
3150         * mn10300-opc.c (mn10300_operands): Remove many redundant
3151         operands.  Update opcode table as appropriate.
3152         (IMM32): Add MN10300_OPERAND_SPLIT flag.
3153         (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
3154
3155 Tue Nov  5 13:26:58 1996  Jeffrey A Law  (law@cygnus.com)
3156
3157         * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
3158         operands (for indexed load/stores).  Fix bitpos for DI
3159         operand.  Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
3160         few instructions that insert immediates/displacements in the
3161         middle of the instruction.  Add IMM8E for 8 bit immediate in
3162         the extended part of an instruction.
3163         (mn10300_operands): Use new opcodes as appropriate.
3164
3165 Tue Nov  5 10:30:51 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3166
3167         * d10v-opc.c (d10v_opcodes): Declare the trap instruction
3168         sequential so the assembler never parallelizes it with
3169         other instructions.
3170
3171 Mon Nov  4 12:50:40 1996  Jeffrey A Law  (law@cygnus.com)
3172
3173         * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
3174         a data/address register that appears in register field 0
3175         and register field 1.
3176         (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
3177
3178 Fri Nov  1 10:29:11 1996  Richard Henderson  <rth@tamu.edu>
3179
3180         * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
3181         standard disassembly.
3182
3183         * alpha-opc.c (alpha_operands): Rearrange flags slot.
3184         (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
3185         Recategorize PALcode instructions.
3186
3187 Wed Oct 30 16:46:58 1996  Jeffrey A Law  (law@cygnus.com)
3188
3189         * v850-opc.c (v850_opcodes): Add relaxing "jbr".
3190
3191 Tue Oct 29 16:30:28 1996  Ian Lance Taylor  <ian@cygnus.com>
3192
3193         * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
3194         there are no operand types.
3195
3196 Tue Oct 29 12:22:21 1996  Jeffrey A Law  (law@cygnus.com)
3197
3198         * v850-opc.c (D9_RELAX): Renamed from D9, all references
3199         changed.
3200         (v850_operands): Make sure D22 immediately follows D9_RELAX.
3201
3202 Fri Oct 25 12:12:53 1996  Ian Lance Taylor  <ian@cygnus.com>
3203
3204         * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
3205
3206 Thu Oct 24 17:53:52 1996  Jeffrey A Law  (law@cygnus.com)
3207
3208         * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
3209         and sst.w instructions.
3210
3211         * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
3212         "bCC"instructions).
3213
3214 Thu Oct 24 17:21:20 1996  Ian Lance Taylor  <ian@cygnus.com>
3215
3216         * mips-dis.c (_print_insn_mips): Use a tab between the instruction
3217         and the arguments.
3218
3219 Tue Oct 22 23:32:56 1996  Ian Lance Taylor  <ian@cygnus.com>
3220
3221         * ppc-opc.c (PPCPWR2): Define.
3222         (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
3223         it.
3224
3225 Fri Oct 11 16:03:49 1996  Jeffrey A Law  (law@cygnus.com)
3226
3227         * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
3228         field for movhu instruction.
3229
3230         * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
3231         cast value to "long" not "signed long" to keep hpux10
3232         compiler quiet.
3233
3234 Thu Oct 10 10:25:58 1996  Jeffrey A Law  (law@cygnus.com)
3235
3236         * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3237         for mov (abs16),DN.
3238
3239         * mn10300-opc.c (FMT*): Remove definitions.
3240
3241         * mn10300-opc.c (mn10300_opcodes): Fix destination register
3242         for shift-by-register opcodes.
3243
3244         * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3245         into [AD][MN][01] for encoding the position of the register
3246         in the opcode.
3247
3248 Wed Oct  9 11:19:26 1996  Jeffrey A Law  (law@cygnus.com)
3249
3250         * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3251         "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3252
3253 Tue Oct  8 11:55:35 1996  Jeffrey A Law  (law@cygnus.com)
3254
3255         * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3256         Fix various typos.  Add "PAREN" operand.
3257         (MEM, MEM2): Define.
3258         (mn10300_opcodes): Surround all memory addresses with "PAREN"
3259         operands.  Fix several typos.
3260
3261         * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3262         changes.
3263
3264 Mon Oct  7 16:48:45 1996  Jeffrey A Law  (law@cygnus.com)
3265
3266         * mn10300-opc.c (FMT_XX): Renumber starting at one.
3267         (mn10300_operands): Rough cut.  Enough to parse "mov" instructions
3268         at this time.
3269         (mn10300_opcodes): Break opcode format out into its own field.
3270         Update many operand fields to deal with signed vs unsigned
3271         issues.  Fix one or two typos in the "mov" instruction
3272         opcode, mask and/or operand fields.
3273
3274 Mon Oct  7 11:39:49 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
3275
3276         * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3277         m68851 wasn't reset.
3278
3279 Thu Oct  3 17:17:02 1996  Ian Lance Taylor  <ian@cygnus.com>
3280
3281         * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3282         all opcodes.  Very rough cut at operands for all opcodes.
3283
3284         * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3285         opcode table.
3286
3287 Thu Oct  3 10:06:07 1996  Jeffrey A Law  (law@cygnus.com)
3288
3289         * mn10200-opc.c, mn10300-opc.c: New files.
3290         * mn10200-dis.c, mn10300-dis.c: New files.
3291         * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3292         * disassemble.c: Break mn10x00 support into 10200 and 10300
3293         support.
3294         * configure.in: Likewise.
3295         * configure: Rebuilt.
3296
3297 Thu Oct  3 15:59:12 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
3298
3299         * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3300
3301 Wed Oct  2 23:28:42 1996  Jeffrey A Law  (law@cygnus.com)
3302
3303         * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3304         MN10x00 processors.
3305         * disassemble (ARCH_mn10x00): Define.
3306         (disassembler): Handle bfd_arch_mn10x00.
3307         * configure.in: Recognize bfd_mn10x00_arch.
3308         * configure: Rebuilt.
3309
3310 Tue Oct  1 10:49:11 1996  Ian Lance Taylor  <ian@cygnus.com>
3311
3312         * i386-dis.c (op_rtn): Change to be a pointer.  Adjust uses
3313         accordingly.  Don't declare functions using op_rtn.
3314
3315 Fri Sep 27 18:28:59 1996  Stu Grossman  (grossman@critters.cygnus.com)
3316
3317         * v850-dis.c (disassemble):  Add memaddr argument.  Re-arrange
3318         params to be more standard.
3319         * (disassemble):  Print absolute addresses and symbolic names for
3320         branch and jump targets.
3321         * v850-opc.c (v850_operand):  Add displacement flag to 9 and 22
3322         bit operands.
3323         * (v850_opcodes):  Add breakpoint insn.
3324
3325 Mon Sep 23 12:32:26 1996  Ian Lance Taylor  <ian@cygnus.com>
3326
3327         * m68k-opc.c: Move the fmovemx data register cases before the
3328         other cases, so that they get recognized before the data register
3329         does gets treated as a degenerate register list.
3330
3331 Tue Sep 17 12:06:51 1996  Ian Lance Taylor  <ian@cygnus.com>
3332
3333         * mips-opc.c: Add a case for "div" and "divu" with two registers
3334         and a destination of $0.
3335
3336 Tue Sep 10 16:12:39 1996  Fred Fish  <fnf@rtl.cygnus.com>
3337
3338         * mips-dis.c (print_insn_arg): Add prototype.
3339         (_print_insn_mips): Ditto.
3340
3341 Mon Sep  9 14:26:26 1996  Ian Lance Taylor  <ian@cygnus.com>
3342
3343         * mips-dis.c (print_insn_arg): Print condition code registers as
3344         $fccN.
3345
3346 Tue Sep  3 12:09:46 1996  Doug Evans  <dje@canuck.cygnus.com>
3347
3348         * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3349
3350 Tue Sep  3 12:05:25 1996  Jeffrey A Law  (law@cygnus.com)
3351
3352         * v850-dis.c (disassemble): Make static.  Provide prototype.
3353
3354 Sun Sep  1 22:30:40 1996  Jeffrey A Law  (law@cygnus.com)
3355
3356         * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3357         in range checks.
3358
3359 Sat Aug 31 01:27:26 1996  Jeffrey A Law  (law@cygnus.com)
3360
3361         * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3362         ']' characters into the output stream.
3363         * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3364         Add "memop" field to all opcodes (for the disassembler).
3365         Reorder opcodes so that "nop" comes before "mov" and "jr"
3366         comes before "jarl".
3367
3368         * v850-dis.c (print_insn_v850): Fix typo in last change.
3369
3370         * v850-dis.c (print_insn_v850): Properly handle disassembling
3371         a two byte insn at the end of a memory region when the memory
3372         region's size is only two byte aligned.
3373
3374         * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3375
3376         * v850-dis.c (v850_reg_names): Define.
3377         (v850_sreg_names, v850_cc_names): Likewise.
3378         (disassemble): Very rough cut at printing operands (unformatted).
3379
3380         * v850-opc.c (BOP_MASK): Fix.
3381         (v850_opcodes): Fix mask for jarl and jr.
3382
3383         * v850-dis.c: New file.  Skeleton for disassembler support.
3384         * Makefile.in Remove v850 references, they're not needed here.
3385         * configure.in: Add v850-dis.o when building v850 toolchains.
3386         * configure: Rebuilt.
3387         * disassemble.c (disassembler): Call v850 disassembler.
3388
3389         * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3390         (insert_d8_6, extract_d8_6): New functions.
3391         (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3392         Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3393         Add D8_6.
3394         (IF4A, IF4B): Use "D7" instead of "D7S".
3395         (IF4C, IF4D): Use "D8_7" instead of "D8".
3396         (IF4E, IF4F): New.  Use "D8_6".
3397         (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b.  Use IF4C/IF4D for
3398         sld.h/sst.h.  Use IF4E/IF4F for sld.w/sst.w.
3399
3400         * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3401         (v850_operands): Change D16 to D16_15, use special insert/extract
3402         routines.  New new D16 that uses the generic insert/extract code.
3403         (IF7A, IF7B): Use D16_15.
3404         (IF7C, IF7D): New.  Use D16.
3405         (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3406
3407         * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3408         message.  Issue an error if the branch offset is odd.
3409
3410         * v850-opc.c: Add notes about needing special insert/extract
3411         for all the load/store insns, except "ld.b" and "st.b".
3412
3413         * v850-opc.c (insert_d22, extract_d22): New functions.
3414         (v850_operands): Use insert_d22 and extract_d22 for
3415         D22 operands.
3416         (insert_d9): Fix range check.
3417
3418 Fri Aug 30 18:01:02 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
3419
3420         * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3421         and set bits field to D9 and D22 operands.
3422
3423 Thu Aug 29 11:10:46 1996  Jeffrey A Law  (law@cygnus.com)
3424
3425         * v850-opc.c (v850_operands): Define SR2 operand.
3426         (v850_opcodes): "ldsr" uses R1,SR2.
3427
3428         * v850-opc.c (v850_opcodes): Fix opcode specs for
3429         sld.w, sst.b, sst.h, sst.w, and nop.
3430
3431 Wed Aug 28 15:55:43 1996  Jeffrey A Law  (law@cygnus.com)
3432
3433         * v850-opc.c (v850_opcodes): Add null opcode to mark the
3434         end of the opcode table.
3435
3436 Mon Aug 26 13:35:53 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3437
3438         * d10v-opc.c (pre_defined_registers): Added register pairs,
3439         "r0-r1", "r2-r3", etc.
3440
3441 Fri Aug 23 00:27:01 1996  Jeffrey A Law  (law@cygnus.com)
3442
3443         * v850-opc.c (v850_operands): Make I16 be a signed operand.
3444         Create I16U for an unsigned 16bit mmediate operand.
3445         (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3446
3447         * v850-opc.c (v850_operands): Define EP operand.
3448         (IF4A, IF4B, IF4C, IF4D): Use EP.
3449
3450         * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3451         with immediate operand, "movhi".  Tweak "ldsr".
3452
3453         * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3454         correct.  Get sld.[bhw] and sst.[bhw] closer.
3455
3456         * v850-opc.c (v850_operands): "not" is a two byte insn
3457
3458         * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3459
3460         * v850-opc.c (v850_operands): D16 inserts at offset 16!
3461
3462         * v850-opc.c (two): Get order of words correct.
3463
3464         * v850-opc.c (v850_operands): I16 inserts at offset 16!
3465
3466         * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3467         register source and destination operands.
3468         (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3469
3470         * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode.  Fix
3471         same thinko in "trap" opcode.
3472
3473         * v850-opc.c (v850_opcodes): Add initializer for size field
3474         on all opcodes.
3475
3476         * v850-opc.c (v850_operands): D6 -> DS7.  References changed.
3477         Add D8 for 8-bit unsigned field in short load/store insns.
3478         (IF4A, IF4D): These both need two registers.
3479         (IF4C, IF4D): Define.  Use 8-bit unsigned field.
3480         (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3481         IF4C & IF4D.  For "trap" use I5U, not I5.  Add IF1 operand
3482         for "ldsr" and "stsr".
3483         * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3484         is unsigned.
3485
3486         * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3487         short store word (sst.w).
3488
3489 Thu Aug 22 16:57:27 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
3490
3491         * v850-opc.c (v850_operands): Added insert and extract fields,
3492         pointers to functions that handle unusual operand encodings.
3493
3494 Thu Aug 22 01:05:24 1996  Jeffrey A Law  (law@cygnus.com)
3495
3496         * v850-opc.c (v850_opcodes): Enable "trap".
3497
3498         * v850-opc.c (v850_opcodes): Fix order of displacement
3499         and register for "set1", "clr1", "not1", and "tst1".
3500
3501 Wed Aug 21 18:46:26 1996  Jeffrey A Law  (law@cygnus.com)
3502
3503         * v850-opc.c (v850_operands): Add "B3" support.
3504         (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3505         and "tst1".
3506
3507         * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3508
3509         * v850-opc.c: Close unterminated comment.
3510
3511 Wed Aug 21 17:31:26 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
3512
3513         * v850-opc.c (v850_operands): Add flags field.
3514         (v850_opcodes): add move opcodes.
3515
3516 Tue Aug 20 14:41:03 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
3517
3518         * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3519         * configure: (bfd_v850v_arch) Add new case.
3520         * configure.in: (bfd_v850_arch) Add new case.
3521         * v850-opc.c: New file.
3522
3523 Mon Aug 19 15:21:38 1996  Doug Evans  <dje@canuck.cygnus.com>
3524
3525         * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3526
3527 Thu Aug 15 13:14:43 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3528
3529         * d10v-opc.c: Add additional information to the opcode
3530         table to help determinine which instructions can be done
3531         in parallel.
3532
3533 Thu Aug 15 13:11:13 1996  Stan Shebs  <shebs@andros.cygnus.com>
3534
3535         * mpw-make.sed: Update editing of include pathnames to be
3536         more general.
3537
3538 Thu Aug 15 16:28:41 1996  James G. Smith  <jsmith@cygnus.co.uk>
3539
3540         * arm-opc.h: Added "bx" instruction definition.
3541
3542 Wed Aug 14 17:00:04 1996  Richard Henderson  <rth@tamu.edu>
3543
3544         * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3545
3546 Mon Aug 12 14:30:37 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3547
3548         * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3549
3550 Fri Aug  9 13:21:59 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3551
3552         * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3553
3554 Thu Aug  8 12:43:52 1996  Klaus Kaempf  <kkaempf@progis.de>
3555
3556         * makefile.vms: Update for alpha-opc changes.
3557
3558 Wed Aug  7 11:55:10 1996  Ian Lance Taylor  <ian@cygnus.com>
3559
3560         * i386-dis.c (print_insn_i386): Actually return the correct value.
3561         (ONE, OP_ONE): #ifdef out; not used.
3562
3563 Fri Aug  2 17:47:03 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3564
3565         * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3566         Changed subi operand type to treat 0 as 16.
3567
3568 Wed Jul 31 16:21:41 1996  Ian Lance Taylor  <ian@cygnus.com>
3569
3570         * m68k-opc.c: Add cpushl for the mcf5200.  From Ken Rose
3571         <rose@netcom.com>.
3572
3573 Wed Jul 31 14:39:27 1996  James G. Smith  <jsmith@cygnus.co.uk>
3574
3575         * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3576         memory transfer instructions. Add new format string entries %h and %s.
3577         * arm-dis.c: (print_insn_arm): Provide decoding of the new
3578         formats %h and %s.
3579
3580 Fri Jul 26 11:45:04 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3581
3582         * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3583         (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3584
3585 Fri Jul 26 14:01:43 1996  Ian Lance Taylor  <ian@cygnus.com>
3586
3587         * alpha-dis.c (print_insn_alpha_osf): Remove.
3588         (print_insn_alpha_vms): Remove.
3589         (print_insn_alpha): Make globally visible.  Chose the register
3590         names based on info->flavour.
3591         * disassemble.c: Always return print_insn_alpha for the alpha.
3592
3593 Thu Jul 25 15:24:17 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3594
3595         * d10v-dis.c (dis_long): Handle unknown opcodes.
3596
3597 Thu Jul 25 12:08:09 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3598
3599         * d10v-opc.c: Changes to support signed and unsigned numbers.
3600         All instructions with the same name that have long and short forms
3601         now end in ".l" or ".s".  Divs added.
3602         * d10v-dis.c: Changes to support signed and unsigned numbers.
3603
3604 Tue Jul 23 11:02:53 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3605
3606         * d10v-dis.c: Change all functions to use info->print_address_func.
3607
3608 Mon Jul 22 15:38:53 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
3609
3610         * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3611         move ccr/sr insns more strict so that the disassembler only
3612         selects them when the addressing mode is data register.
3613
3614 Mon Jul 22 11:25:24 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3615         * d10v-opc.c (pre_defined_registers):  Declare.
3616         * d10v-dis.c (print_operand): Now uses pre_defined_registers
3617         to pick a better name for the registers.
3618
3619 Mon Jul 22 13:47:23 1996  Ian Lance Taylor  <ian@cygnus.com>
3620
3621         * sparc-opc.c: Fix opcode values for fpack16, and fpackfix.  Fix
3622         operands for fexpand and fpmerge.  From Christian Kuehnke
3623         <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3624
3625 Mon Jul 22 13:17:06 1996  Richard Henderson  <rth@tamu.edu>
3626
3627         * alpha-dis.c (print_insn_alpha): No longer the user-visible
3628         print routine.  Take new regnames and cpumask arguments.
3629         Kill the environment variable nonsense.
3630         (print_insn_alpha_osf): New function.  Do OSF/1 style regnames.
3631         (print_insn_alpha_vms): New function.  Do VMS style regnames.
3632         * disassemble.c (disassembler): Test bfd flavour to pick
3633         between OSF and VMS routines.  Default to OSF.
3634
3635 Thu Jul 18 17:19:34 1996  Ian Lance Taylor  <ian@cygnus.com>
3636
3637         * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3638         * configure: Rebuild.
3639         * Makefile.in (install): Use @INSTALL_SHLIB@.
3640
3641 Wed Jul 17 14:39:05 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3642
3643         * configure: (bfd_d10v_arch) Add new case.
3644         * configure.in: (bfd_d10v_arch) Add new case.
3645         * d10v-dis.c: New file.
3646         * d10v-opc.c: New file.
3647         * disassemble.c (disassembler) Add entry for d10v.
3648
3649 Wed Jul 17 10:12:05 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
3650
3651         * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3652         to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3653
3654 Mon Jul 15 16:59:55 1996  Stu Grossman  (grossman@critters.cygnus.com)
3655
3656         * i386-dis.c:  Get rid of print_insn_i8086.  Use info.mach to
3657         distinguish between variants of the instruction set.
3658         * sparc-dis.c:  Get rid of print_insn_sparclite.  Use info.mach to
3659         distinguish between variants of the instruction set.
3660
3661 Fri Jul 12 10:12:01 1996  Stu Grossman  (grossman@critters.cygnus.com)
3662
3663         * i386-dis.c (print_insn_i8086):  New routine to disassemble using
3664         the 8086 instruction set.
3665         * i386-dis.c:  General cleanups.  Make most things static.  Add
3666         prototypes.  Get rid of static variables aflags and dflags.  Pass
3667         them as args (to almost everything).
3668
3669 Thu Jul 11 11:58:44 1996  Jeffrey A Law  (law@cygnus.com)
3670
3671         * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3672
3673         * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3674
3675         * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3676         if the next arg is marked with SRC_IN_DST.  Gross.
3677
3678         * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3679         we're looking for and find EXR.
3680
3681         * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3682         if we're looking for KBIT and we don't find it.
3683
3684         * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3685         for L_3 and L_2.
3686
3687         * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3688         3bit immediate operands.
3689
3690 Tue Jul  9 10:55:20 1996  Ian Lance Taylor  <ian@cygnus.com>
3691
3692         * Released binutils 2.7.
3693
3694         * alpha-opc.c: Add new case of "mov".  From Klaus Kaempf
3695         <kkaempf@progis.ac-net.de>.
3696
3697 Thu Jul  4 11:42:51 1996  Ian Lance Taylor  <ian@cygnus.com>
3698
3699         * alpha-opc.c: Correct second case of "mov" to use OPRL.
3700
3701 Wed Jul  3 16:03:47 1996  Stu Grossman  (grossman@critters.cygnus.com)
3702
3703         * sparc-dis.c (print_insn_sparclite):  New routine to print
3704         sparclite instructions.
3705
3706 Wed Jul  3 14:21:18 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
3707
3708         * m68k-opc.c (m68k_opcodes): Add coldfire support.
3709
3710 Fri Jun 28 15:53:51 1996  Doug Evans  <dje@canuck.cygnus.com>
3711
3712         * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3713         #ASI_NUCLEUS_LITTLE.  Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3714         to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3715
3716 Tue Jun 25 22:58:31 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
3717
3718         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3719         Use autoconf-set values.
3720         (docdir, oldincludedir): Removed.
3721         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3722
3723 Fri Jun 21 13:53:36 1996  Richard Henderson  <rth@tamu.edu>
3724
3725         * alpha-opc.c: New file.
3726         * alpha-opc.h: Remove.
3727         * alpha-dis.c: Complete rewrite to use new opcode table.
3728         * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3729         * configure: Rebuild with autoconf 2.10.
3730         * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3731         (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3732         alpha-opc.h.
3733         (alpha-opc.o): New target.
3734
3735 Wed Jun 19 15:55:12 1996  Ian Lance Taylor  <ian@cygnus.com>
3736
3737         * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3738         Set imm_added_to_rs1 even if the source and destination register
3739         are not the same.
3740
3741         * sparc-opc.c: Add some two operand forms of the wr instruction.
3742
3743 Tue Jun 18 15:58:27 1996  Jeffrey A. Law  <law@rtl.cygnus.com>
3744
3745         * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3746         to just "mode".
3747
3748         * disassemble.c (disassembler): Handle H8/S.
3749         * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3750
3751 Tue Jun 18 18:06:50 1996  Ian Lance Taylor  <ian@cygnus.com>
3752
3753         * sparc-opc.c: Add beq/teq as aliases for be/te.
3754
3755         * ppc-opc.c: Fix fcmpo opcode.  From Sergei Steshenko
3756         <sergei@msil.sps.mot.com>.
3757
3758 Tue Jun 18 15:08:54 1996  Klaus Kaempf  <kkaempf@progis.de>
3759
3760         * makefile.vms: New file.
3761
3762         * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3763
3764 Mon Jun 10 18:50:38 1996  Ian Lance Taylor  <ian@cygnus.com>
3765
3766         * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3767         regardless of plen.
3768
3769 Tue Jun  4 09:15:53 1996  Doug Evans  <dje@canuck.cygnus.com>
3770
3771         * i386-dis.c (OP_OFF): Call append_prefix.
3772
3773 Thu May 23 15:18:23 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
3774
3775         * ppc-opc.c (instruction encoding macros): Add explicit casts to
3776         unsigned long to silence a warning from the Solaris PowerPC
3777         compiler.
3778
3779 Thu Apr 25 19:33:32 1996  Doug Evans  <dje@canuck.cygnus.com>
3780
3781         * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3782
3783 Mon Apr 22 17:12:35 1996  Doug Evans  <dje@blues.cygnus.com>
3784
3785         * sparc-dis.c (X_IMM,X_SIMM): New macros.
3786         (X_IMM13): Delete.
3787         (print_insn_sparc): Merge cases i,I,j together.  New cases X,Y.
3788         * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3789         Y for 6 bit shift constants.  Rewrite entries for crdcxt, cwrcxt,
3790         cpush, cpusha, cpull sparclet insns.
3791
3792 Wed Apr 17 14:20:22 1996  Doug Evans  <dje@canuck.cygnus.com>
3793
3794         * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3795
3796 Thu Apr 11 17:30:02 1996  Ian Lance Taylor  <ian@cygnus.com>
3797
3798         * sparc-opc.c: Set F_FBR on floating point branch instructions.
3799         Set F_FLOAT on other floating point instructions.
3800
3801 Mon Apr  8 17:02:48 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
3802
3803         * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3804         registers.
3805         (powerpc_opcodes): Add 860/821 specific SPRs.
3806
3807 Mon Apr  8 14:00:44 1996  Ian Lance Taylor  <ian@cygnus.com>
3808
3809         * configure.in: Permit --enable-shared to specify a list of
3810         directories.  Set and substitute BFD_PICLIST.
3811         * configure: Rebuild.
3812         * Makefile.in (BFD_PICLIST): Rename from BFD_LIST.  Change all
3813         uses.  Set to @BFD_PICLIST@.
3814
3815 Fri Apr  5 17:12:27 1996  Jeffrey A Law  (law@cygnus.com)
3816
3817         * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3818         not "abs", which may be needed for the absolute in something
3819         like btst #0,@10:8.  Print L_3 immediates separately from other
3820         immediates.  Change ABSMOV reference to ABS8MEM.
3821
3822 Wed Apr  3 10:40:45 1996  Doug Evans  <dje@canuck.cygnus.com>
3823
3824         * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3825         (current_arch_mask): New static global.
3826         (compute_arch_mask): New static function.
3827         (print_insn_sparc): Delete sparc_v9_p.  New static local
3828         current_mach.  Resort opcode table if current_mach changes.
3829         Generalize "insn not supported" test.
3830         (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3831         Delete test for v9/!v9.
3832         * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3833         (v6notlet): Define.
3834         (brfc): Split into CBR and FBR for coprocessor/fp branches.
3835         (brfcx): Renamed to FBRX.
3836         (condfc): Renamed to CONDFC.  Pass v6notlet to CBR (standard
3837         coprocessor mnemonics are not supported on the sparclet).
3838         (condf): Renamed to CONDF.
3839         (SLCBCC2): Delete F_ALIAS flag.
3840
3841 Sat Mar 30 21:45:59 1996  Doug Evans  <dje@canuck.cygnus.com>
3842
3843         * sparc-opc.c (sparc_opcodes): rd must be 0 for
3844         mov foo,{%y,%psr,%wim,%tbr}.  Support mov foo,%asrX.
3845
3846 Fri Mar 29 13:02:40 1996  Ian Lance Taylor  <ian@cygnus.com>
3847
3848         * Makefile.in (config.status): Depend upon BFD VERSION file, so
3849         that the shared library version number is set correctly.
3850
3851 Tue Mar 26 15:47:14 1996  Ian Lance Taylor  <ian@cygnus.com>
3852
3853         * configure.in: Use AC_CHECK_TOOL to find ar and ranlib.  From
3854         Miles Bader <miles@gnu.ai.mit.edu>.
3855         * configure: Rebuild.
3856
3857 Sat Mar 16 13:04:07 1996  Fred Fish  <fnf@cygnus.com>
3858
3859         * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3860         malloc.
3861
3862 Tue Mar 12 12:14:10 1996  Ian Lance Taylor  <ian@cygnus.com>
3863
3864         * configure: Rebuild with autoconf 2.8.
3865
3866 Thu Mar  7 15:11:10 1996  Doug Evans  <dje@charmed.cygnus.com>
3867
3868         * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3869         * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3870
3871 Tue Mar  5 15:51:57 1996  Ian Lance Taylor  <ian@cygnus.com>
3872
3873         * configure.in: Don't set SHLIB or SHLINK to an empty string,
3874         since they appear as targets in Makefile.in.
3875         * configure: Rebuild.
3876
3877 Mon Feb 26 13:03:40 1996  Stan Shebs  <shebs@andros.cygnus.com>
3878
3879         * mpw-make.sed: Edit out shared library support bits.
3880
3881 Tue Feb 20 20:48:28 1996  Doug Evans  <dje@charmed.cygnus.com>
3882
3883         * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3884         (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3885         (sparc_opcodes): Add sparclet insns.
3886         (sparclet_cpreg_table): New static local.
3887         (sparc_{encode,decode}_sparclet_cpreg): New functions.
3888         * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3889
3890 Tue Feb 20 11:02:44 1996  Alan Modra  <alan@mullet.Levels.UniSA.Edu.Au>
3891
3892         * i386-dis.c (index16): New static variable.
3893         (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3894         other way around.
3895         (OP_indirE): Return result of OP_E.
3896         (OP_E): Check for 16 bit addressing mode, and disassemble
3897         correctly.  Optimised 32 bit case a little.  Don't print
3898         "(base,index,scale)" when sib specifies only an offset.
3899
3900 Mon Feb 19 12:32:17 1996  Ian Lance Taylor  <ian@cygnus.com>
3901
3902         * configure.in: Set and substitute SHLIB_DEP.
3903         * configure: Rebuild.
3904         * Makefile.in (SHLIB_DEP): New variable.
3905         (LIBIBERTY_LISTS, BFD_LIST): New variables.
3906         (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST.  If
3907         COMMON_SHLIB, add them to piclist with appropriate modifications.
3908         ($(SHLIB)): Depend upon $(SHLIB_DEP).  Don't check COMMON_SHLIB
3909         here: just use piclist.
3910
3911 Mon Feb 19 02:03:50 1996  Doug Evans  <dje@charmed.cygnus.com>
3912
3913         * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3914         (print_insn_sparc): Rewrite v9/not-v9 tests.
3915         (compare_opcodes): Likewise.
3916         * sparc-opc.c (MASK_<ARCH>): Define.
3917         (v6,v7,v8,sparclite,v9,v9a): Redefine.
3918         (sparclet,v6notv9): Define.
3919         (sparc_opcode_archs): Delete member `conflicts'.  Add `supported'.
3920         (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3921
3922 Thu Feb 15 14:45:05 1996  Ian Lance Taylor  <ian@cygnus.com>
3923
3924         * configure.in: Call AC_PROG_CC before configure.host.
3925         * configure: Rebuild.
3926
3927         * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3928
3929 Wed Feb 14 19:01:27 1996  Alan Modra  <alan@spri.levels.unisa.edu.au>
3930
3931         * i386-dis.c (onebyte_has_modrm): New static array.
3932         (twobyte_has_modrm): New static array.
3933         (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3934
3935 Tue Feb 13 15:15:01 1996  Ian Lance Taylor  <ian@cygnus.com>
3936
3937         * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3938         $(SHLINK).
3939
3940 Mon Feb 12 16:26:06 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
3941
3942         * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3943         doesn't conflict.
3944
3945 Wed Feb  7 13:59:54 1996  Ian Lance Taylor  <ian@cygnus.com>
3946
3947         * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3948         m68010up, not just m68020up | cpu32.
3949
3950         * Makefile.in (SONAME): New variable.
3951         ($(SHLINK)): Make a link to the transformed name, as well.
3952         (stamp-tshlink): New target.
3953         (install): Skip stamp-tshlink during install.
3954
3955 Tue Feb  6 12:28:54 1996  Ian Lance Taylor  <ian@cygnus.com>
3956
3957         * configure.in: Call AC_ARG_PROGRAM.
3958         * configure: Rebuild.
3959         * Makefile.in (program_transform_name): New variable.
3960         (install): Transform library name before installing it.
3961
3962 Mon Feb  5 16:14:42 1996  Ian Lance Taylor  <ian@cygnus.com>
3963
3964         * i960-dis.c (mem): Add HX dcinva instruction.
3965
3966         Support for building as a shared library, based on patches from
3967         Alan Modra <alan@spri.levels.unisa.edu.au>:
3968         * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3969         New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3970         SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3971         * configure: Rebuild.
3972         * Makefile.in (ALLLIBS): New variable.
3973         (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3974         (COMMON_SHLIB, SHLINK): New variables.
3975         (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3976         (STAGESTUFF): Remove variable.
3977         (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3978         (stamp-piclist, piclist): New targets.
3979         ($(SHLIB), $(SHLINK)): New targets.
3980         ($(OFILES)): Depend upon stamp-picdir.
3981         (disassemble.o): Build twice if PICFLAG is set.
3982         (MOSTLYCLEAN): Add pic/*.o.
3983         (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3984         (distclean): Remove pic and stamp-picdir.
3985         (install): Install shared libraries.
3986         (stamp-picdir): New target.
3987
3988 Fri Feb  2 17:15:25 1996  Doug Evans  <dje@charmed.cygnus.com>
3989
3990         * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3991         Print unknown instruction as "unknown", rather than in hex.
3992
3993 Tue Jan 30 14:06:08 1996  Ian Lance Taylor  <ian@cygnus.com>
3994
3995         * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3996
3997 Thu Jan 25 20:24:07 1996  Doug Evans  <dje@charmed.cygnus.com>
3998
3999         * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
4000
4001 Thu Jan 25 11:56:49 1996  Ian Lance Taylor  <ian@cygnus.com>
4002
4003         * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
4004         when necessary.  From Ulrich Drepper
4005         <drepper@myware.rz.uni-karlsruhe.de>.
4006
4007 Thu Jan 25 03:39:10 1996  Doug Evans  <dje@charmed.cygnus.com>
4008
4009         * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
4010         sparc_num_opcodes.  Update architecture enum values.
4011         * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
4012         (sparc_opcode_lookup_arch): New function.
4013         (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
4014         (sparc_opcodes): Add v9a shutdown insn.
4015
4016 Mon Jan 22 08:29:59 1996  Doug Evans  <dje@charmed.cygnus.com>
4017
4018         * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
4019         If DISASM_RAW_INSN, print insn in hex.  Handle v9a as opcode
4020         architecture.
4021         (print_insn_sparc64): Deleted.
4022         * disassemble.c (disassembler, case bfd_arch_sparc): Always use
4023         print_insn_sparc.
4024
4025         * sparc-opc.c (architecture_pname): Add v9a.
4026
4027 Fri Jan 12 14:35:58 1996  David Mosberger-Tang  <davidm@AZStarNet.com>
4028
4029         * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
4030         incorrectly defined as 0x16 when it should be 0x15.
4031         (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
4032         (alpha_insn_set): added cvtst and cvttq float ops.  Also added
4033         excb (exception barrier) which is defined in the Alpha
4034         Architecture Handbook version 2.
4035         * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
4036         OPERATE_FORMAT_CODE type instructions.  The bug caused mulq to be
4037         disassembled as or, for example.
4038
4039 Wed Jan 10 12:37:22 1996  Ian Lance Taylor  <ian@cygnus.com>
4040
4041         * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
4042         (_print_insn_mips): Change i from int to unsigned int.
4043
4044 Thu Jan  4 17:21:10 1996  David Edelsohn  <edelsohn@mhpcc.edu>
4045
4046         * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
4047         from tlbie PowerPC opcode.  Add PPC603 tlbld and tlbli.
4048
4049 Thu Dec 28 13:29:19 1995  John Hassey  <hassey@rtp.dg.com>
4050
4051         * i386-dis.c: Added Pentium Pro instructions.
4052
4053 Tue Dec 19 22:56:35 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
4054
4055         * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
4056         being for Power2.
4057
4058 Fri Dec 15 14:14:15 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
4059
4060         * sh-opc.h (sh_nibble_type): Added REG_B.
4061         (sh_arg_type): Added A_REG_B.
4062         (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
4063         and stc.l opcodes.
4064         * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
4065
4066 Fri Dec 15 16:44:31 1995  Ian Lance Taylor  <ian@cygnus.com>
4067
4068         * disassemble.c (disassembler): Use new bfd_big_endian macro.
4069
4070 Tue Dec 12 12:22:24 1995  Ian Lance Taylor  <ian@cygnus.com>
4071
4072         * Makefile.in (distclean): Remove stamp-h.  From Ronald
4073         F. Guilmette <rfg@monkeys.com>.
4074
4075 Tue Dec  5 13:42:44 1995  Stan Shebs  <shebs@andros.cygnus.com>
4076
4077         From David Mosberger-Tang  <davidm@azstarnet.com>:
4078         * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
4079         instruction.
4080
4081 Mon Dec  4 12:29:05 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
4082
4083         * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
4084         (sh_table): Added many SH3 opcodes.
4085         * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
4086
4087 Fri Dec  1 07:42:18 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
4088
4089         * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
4090         (subco,subco.): Mark this PPC, not PPCCOM.
4091
4092 Mon Nov 27 13:09:52 1995  Ian Lance Taylor  <ian@cygnus.com>
4093
4094         * configure: Rebuild with autoconf 2.7.
4095
4096 Tue Nov 21 18:28:06 1995  Ian Lance Taylor  <ian@cygnus.com>
4097
4098         * configure: Rebuild with autoconf 2.6.
4099
4100 Wed Nov 15 19:02:53 1995  Ken Raeburn  <raeburn@cygnus.com>
4101
4102         * configure.in: Sort list of architectures.  Accept but do nothing
4103         for alliant, convex, pyramid, romp, and tahoe.
4104
4105 Wed Nov  8 20:18:59 1995  Ian Lance Taylor  <ian@cygnus.com>
4106
4107         * a29k-dis.c (print_special): Change num to unsigned int.
4108
4109 Wed Nov  8 20:10:35 1995  Eric Freudenthal <freudenthal@nyu.edu>
4110
4111         * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
4112         shifting it.
4113
4114 Tue Nov  7 15:21:06 1995  Ian Lance Taylor  <ian@cygnus.com>
4115
4116         * configure.in: Call AC_CHECK_PROG to find and cache AR.
4117         * configure: Rebuilt.
4118
4119 Mon Nov  6 17:39:47 1995  Harry Dolan  <dolan@ssd.intel.com>
4120
4121         * configure.in: Add case for bfd_i860_arch.
4122         * configure: Rebuild.
4123
4124 Fri Nov  3 12:45:31 1995  Ian Lance Taylor  <ian@cygnus.com>
4125
4126         * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
4127         * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
4128         (NEXTDOUBLE): Likewise.
4129         (print_insn_m68k): Don't match fmoveml if there is more than one
4130         register in the list.
4131         (print_insn_arg): Handle a place of '8' for a type of 'L'.
4132
4133 Thu Nov  2 23:06:33 1995  Ian Lance Taylor  <ian@cygnus.com>
4134
4135         * m68k-opc.c: Use #W rather than #w.
4136         * m68k-dis.c (print_insn_arg): Handle new 'W' place.
4137
4138 Wed Nov  1 13:30:24 1995  Ian Lance Taylor  <ian@cygnus.com>
4139
4140         * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
4141         and likewise for all the dbxx opcodes.
4142
4143 Mon Oct 30 20:50:40 1995  Fred Fish  <fnf@cygnus.com>
4144
4145         * arc-dis.c: Include elf-bfd.h rather than libelf.h.
4146
4147 Mon Oct 23 11:11:34 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
4148
4149         * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
4150         the VR4100 specific instructions to the mips_opcodes structure.
4151
4152 Thu Oct 19 11:05:23 1995  Stan Shebs  <shebs@andros.cygnus.com>
4153
4154         * mpw-config.in, mpw-make.sed: Remove ugly workaround for
4155         ugly Metrowerks bug in CW6, is fixed in CW7.
4156
4157 Mon Oct 16 12:59:01 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
4158
4159         * ppc-opc.c (whole file): Add flags for common/any support.
4160
4161 Tue Oct 10 11:06:07 1995  Fred Fish  <fnf@cygnus.com>
4162
4163         * Makefile.in (BISON): Remove macro.
4164         (FLAGS_TO_PASS): Remove BISON.
4165
4166 Fri Oct  6 16:26:45 1995  Ken Raeburn  <raeburn@cygnus.com>
4167
4168         Mon Sep 25 22:49:32 1995  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
4169
4170         * m68k-dis.c (print_insn_m68k): Recognize all two-word
4171         instructions that take no args by looking at the match mask.
4172         (print_insn_arg): Always print "%" before register names.
4173         [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
4174         [case '_']: Don't print "@#" before address.
4175         [case 'J']: Use "%s" as format string, not register name.
4176         [case 'B']: Treat place == 'C' like 'l' and 'L'.
4177
4178 Thu Oct  5 22:16:20 1995  Ken Raeburn  <raeburn@cygnus.com>
4179
4180         * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
4181         name correctly.
4182
4183 Tue Oct  3 08:30:20 1995  steve chamberlain  <sac@slash.cygnus.com>
4184
4185         From David Mosberger-Tang  <davidm@azstarnet.com>
4186
4187         * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
4188         (alpha_insn_set): added definitions for VAX floating point
4189         instructions (Unix compilers don't generate these, but handcoded
4190         assembly might still use them).
4191
4192         * alpha-dis.c (print_insn_alpha): added support for disassembling
4193         the miscellaneous instructions in the Alpha instruction set.
4194
4195 Tue Sep 26 18:47:20 1995  Stan Shebs  <shebs@andros.cygnus.com>
4196
4197         * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
4198         no longer create sysdep.h, sed ppc-opc.c to work around a
4199         serious Metrowerks C bug.
4200         * mpw-make.in: Remove.
4201         * mpw-make.sed: New file, used by mpw-configure to edit
4202         Makefile.in into an MPW makefile.
4203
4204 Wed Sep 20 12:55:28 1995  Ian Lance Taylor  <ian@cygnus.com>
4205
4206         * Makefile.in (maintainer-clean): New synonym for realclean.
4207
4208 Tue Sep 19 15:28:36 1995  Ian Lance Taylor  <ian@cygnus.com>
4209
4210         * m68k-opc.c: Split pmove patterns which use 'P' into patterns
4211         which use '0', '1', and '2' instead.  Specify the proper size for
4212         a pmove immediate operand.  Correct the pmovefd patterns to be
4213         moves to a register, not from a register.
4214         * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
4215
4216 Thu Sep 14 11:58:22 1995  Doug Evans  <dje@canuck.cygnus.com>
4217
4218         * sparc-opc.c (sparc_opcodes): Mark all insns that reference
4219         %psr, %wim, %tbr as F_NOTV9.
4220
4221 Fri Sep  8 01:07:38 1995  Ian Lance Taylor  <ian@cygnus.com>
4222
4223         * Makefile.in (Makefile): Just rebuild Makefile when running
4224         config.status.
4225         (config.h, stamp-h): New targets.
4226         * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
4227         earlier.  Don't bother to call AC_ARG_PROGRAM.  Touch stamp-h when
4228         rebuilding config.h.
4229         * configure: Rebuild.
4230
4231         * mips-opc.c: Change unaligned loads and stores with "t,A"
4232         operands to use "t,A(b)".
4233
4234 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
4235
4236         * sh-dis.c (print_insn_shx): Add F_FR0 support.
4237
4238 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
4239
4240         * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4241         until 3 instead of until 2.
4242
4243 Wed Sep  6 21:21:33 1995  Ian Lance Taylor  <ian@cygnus.com>
4244
4245         * Makefile.in (ALL_CFLAGS): Define.
4246         (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4247         (MOSTLYCLEAN): Add config.log.
4248         (distclean): Don't remove config.log.
4249         * configure.in: Substitute HDEFINES.
4250         * configure: Rebuild.
4251
4252 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
4253
4254         * sh-opc.h (sh_arg_type): Add F_FR0.
4255         (sh_table, case fmac): Add F_FR0 as first argument.
4256
4257 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
4258
4259         * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4260
4261 Tue Sep  5 18:28:10 1995  Doug Evans  <dje@canuck.cygnus.com>
4262
4263         * sparc-dis.c: Remove all references to NO_V9.
4264
4265 Tue Sep  5 20:03:26 1995  Ian Lance Taylor  <ian@cygnus.com>
4266
4267         * aclocal.m4: Just include ../bfd/aclocal.m4.
4268         * configure: Rebuild.
4269
4270 Tue Sep  5 16:09:59 1995  Doug Evans  <dje@canuck.cygnus.com>
4271
4272         * sparc-dis.c (X_DISP19): Define.
4273         (print_insn, case 'G'): Use it.
4274         (print_insn, case 'L'): Sign extend displacement.
4275
4276 Mon Sep  4 14:28:46 1995  Ian Lance Taylor  <ian@cygnus.com>
4277
4278         * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4279         Subsitute CFLAGS and AR.  Call AC_PROG_INSTALL.  Don't substitute
4280         host_makefile_frag or frags.
4281         * aclocal.m4: New file.
4282         * configure: Rebuild.
4283         * Makefile.in (INSTALL): Set to @INSTALL@.
4284         (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4285         (INSTALL_DATA): Set to @INSTALL_DATA@.
4286         (AR): Set to @AR@.
4287         (AR_FLAGS): Set to rc rather than qc.
4288         (CC): Define as @CC@.
4289         (CFLAGS): Set to @CFLAGS@.
4290         (@host_makefile_frag@): Remove.
4291         (config.status): Remove dependency upon @frags@.
4292
4293         * configure.in: ../bfd/config.bfd now just sets shell variables.
4294         Use them rather than looking through target Makefile fragments.
4295         * configure: Rebuild.
4296
4297 Thu Aug 31 12:35:32 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
4298
4299         * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4300
4301 Wed Aug 30 13:52:28 1995  Doug Evans  <dje@canuck.cygnus.com>
4302
4303         * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4304         Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4305         sparc64 insns.
4306
4307         * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4308         (lookup_{name,value}): New functions.
4309         (prefetch_table): New static local.
4310         (sparc_{encode,decode}_prefetch): New functions.
4311         * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4312
4313 Wed Aug 30 11:11:58 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
4314
4315         * sh-opc.h: Add blank lines to improve readabililty of sh3e
4316         instructions.
4317
4318 Wed Aug 30 11:09:38 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
4319
4320         * sh-dis.c: Correct comment on first line of file.
4321
4322 Tue Aug 29 15:37:18 1995  Doug Evans  <dje@canuck.cygnus.com>
4323
4324         * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4325
4326         * sparc-opc.c (asi, membar): New static locals.
4327         (sparc_{encode,decode}_{asi,membar}): New functions.
4328         (sparc_opcodes, membar insn): Fix.
4329         * sparc-dis.c (print_insn): Call sparc_decode_asi.
4330         Support decoding of membar masks.
4331         (X_MEMBAR): Define.
4332
4333 Sat Aug 26 21:22:48 1995  Ian Lance Taylor  <ian@cygnus.com>
4334
4335         * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4336
4337 Mon Aug 21 17:33:36 1995  Ian Lance Taylor  <ian@cygnus.com>
4338
4339         * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4340         and likewise for the other branches.  Add bhs as an alias for bcc,
4341         and likewise for the size variants.  Add dbhs as an alias for
4342         dbcc.
4343
4344 Fri Aug 11 13:40:24 1995  Jeff Law  (law@snake.cs.utah.edu)
4345
4346         * sh-opc.h (FP sts instructions): Update to match reality.
4347
4348 Mon Aug  7 16:12:58 1995  Ian Lance Taylor  <ian@cygnus.com>
4349
4350         * m68k-dis.c: (fpcr_names): Add % before all register names.
4351         (reg_names): Likewise.
4352         (print_insn_arg): Don't explicitly print % before register names.
4353         Add % before register names in static array names.  In case 'r',
4354         print data registers as `@(Dn)', not `Dn@'.  When printing a
4355         memory address, don't print @# before it.
4356         (print_indexed): Change base_disp and outer_disp from int to
4357         bfd_vma.  Print using MIT syntax, not mutant invalid Motorola
4358         syntax.  Sign extend 8 byte displacement correctly.
4359         (print_base): Print using MIT syntax.  Print zpc when appropriate.
4360         Change parameter disp from int to bfd_vma.
4361
4362         * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4363         for jsr.
4364
4365 Mon Aug  7 02:21:40 1995  Jeff Law  (law@snake.cs.utah.edu)
4366
4367         * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4368         F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4369         * sh-opc.h (sh_arg_type): Add new operand types.
4370         (sh_table): Add new opcodes from SH3E Floating Point ISA.
4371
4372 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
4373
4374         * Makefile.in (distclean): Remove generated file config.h.
4375
4376 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
4377
4378         * Makefile.in (distclean): Remove generated file config.h.
4379
4380 Wed Aug  2 18:33:40 1995  Ian Lance Taylor  <ian@cygnus.com>
4381
4382         * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4383         Clean up tables.
4384         * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4385         (opcode): Remove.
4386         (print_insn_m68k): Change d to be const.  Use m68k_numopcodes
4387         rather than numopcodes.  Use m68k_opcodes rather than removed
4388         opcode function.  Don't check F_ALIAS.
4389         (print_insn_arg): Change first parameter to be const char *.
4390         * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4391         (m68k-opc.o): New target.
4392         * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4393         * configure: Rebuild.
4394
4395 Wed Aug  2 08:23:38 1995  Doug Evans  <dje@canuck.cygnus.com>
4396
4397         * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4398         (opcode_bits, opcode_hash_table): New variables.
4399         (opcodes_initialized): Renamed from opcodes_sorted.
4400         (build_hash_table): New function.
4401         (is_delayed_branch): Use hash table.
4402         (print_insn): Renamed from print_insn_sparc, made static.
4403         Build and use hash table.  If !sparc64, ignore sparc64 insns,
4404         and vice-versa if sparc64.
4405         (print_insn_sparc, print_insn_sparc64): New functions.
4406         (compare_opcodes): Move sparc64 opcodes to end.
4407         Print commutative insns with constant second.
4408         * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4409
4410 Tue Aug  1 00:12:49 1995  Ian Lance Taylor  <ian@cygnus.com>
4411
4412         * sh-dis.c (print_insn_shx): Remove unused local dslot.  Use
4413         print_address_func for A_BDISP12 and A_BDISP8.  Correct test which
4414         avoids printing a delay slot in a delay slot.
4415         * sh-opc.h (sh_table): Fully bracket last entry.
4416
4417 Mon Jul 31 12:04:47 1995  Doug Evans  <dje@canuck.cygnus.com>
4418
4419         * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4420
4421 Wed Jul 12 00:59:34 1995  Ken Raeburn  <raeburn@kr-pc.cygnus.com>
4422
4423         * configure.in: Get host_makefile_frag from ${srcdir}.
4424
4425         * configure.in: Autoconfiscated.  Check for string[s].h.  Create
4426         config.h from config.in.  Don't set up sysdep.h link.
4427         * sysdep.h: New file.
4428         * configure, config.in: New files, generated from configure.in.
4429         * Makefile.in: Updated to be processed autoconf-style.
4430         (distclean): Keep sysdep.h.  Remove config.log and config.cache.
4431         (Makefile): Depend on config.status.
4432         (config.status): New rule.
4433         * configure.bat: Update Makefile substitutions.
4434
4435 Tue Jul 11 14:23:37 1995  Jeff Spiegel  <jeffs@lsil.com>
4436
4437         * mips-opc.c (L1): Define.
4438         (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4439         addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4440         and wb.
4441
4442 Tue Jul 11 11:49:49 1995  Ian Lance Taylor  <ian@cygnus.com>
4443
4444         * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4445         if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4446         have multiple add units but only a single logical unit.
4447
4448         * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4449         shifted by 18, without any insertion or extraction function.
4450         (insert_cr, extract_cr): Remove.
4451
4452 Wed Jun 21 20:05:39 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
4453
4454         * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4455         register names.
4456
4457 Thu Jun 15 17:23:31 1995  Stan Shebs  <shebs@andros.cygnus.com>
4458
4459         * mpw-config.in: Add sh and i386 configs, remove sparc config.
4460         * sh-opc.h: Add copyright.
4461
4462 Mon Jun  5 03:30:43 1995  Ken Raeburn  <raeburn@kr-laptop.cygnus.com>
4463
4464         * Makefile.in (crunch-m68k): Delete extra target accidentally
4465         checked in a while ago.
4466
4467 Wed May 24 16:22:13 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
4468
4469         * sh-opc.h (sh_table): Add SH3 support.
4470
4471 Wed May 24 14:16:08 1995  Steve Chamberlain  <sac@slash.cygnus.com>
4472
4473         * sh-opc.h: Added bsrf and braf.
4474
4475 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4476
4477         * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns.  Delete
4478         bogus [ls]fm{ea,fd} patterns.
4479
4480         * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4481         * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4482         initialize it from memory.  Make function static.
4483         (print_insn_{big,little}_arm): New functions.
4484         * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4485         the correct endianness.
4486
4487 Mon Apr 24 14:18:05 1995  Jason Molenda   (crash@phydeaux.cygnus.com>
4488
4489         * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4490         enum list.
4491
4492 Wed Apr 19 14:07:03 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
4493
4494         * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4495         17th, so that it builds again using GCC as the compiler.
4496
4497 Tue Apr 18 12:14:51 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
4498
4499         * mips-dis.c (print_insn_little_mips): Cast return value from
4500         bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4501         expects an unsigned long, and that might be fewer words of
4502         argument storage (e.g., if bfd_vma is long long on a 32-bit
4503         machine).
4504         (print_insn_big_mips): Likewise with bfd_getb32 value.
4505         (_print_insn_mips): Now static.
4506
4507 Mon Apr 17 12:23:28 1995  Kung Hsu  <kung@rtl.cygnus.com>
4508
4509         * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4510         gcc memory hog problem with initializer is fixed.
4511
4512 Mon Apr 10 15:55:01 1995  Stan Shebs  <shebs@andros.cygnus.com>
4513
4514         Merge in support for Mac MPW as a host.
4515         (Old change descriptions retained for informational value.)
4516
4517         * mpw-config.in (archname): Compute from the config.
4518         (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4519
4520         * mpw-config.in (target_arch): Compute from canonical target.
4521         (m68k, mips, powerpc, sparc): Add architectures.
4522         * mpw-make.in (disassemble.c.o): Add.
4523         (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4524
4525         * mpw-config.in (BFD_MACHINES): Set to a default value.
4526         * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4527
4528         * mpw-make.in (CSEARCH): Add extra-include to search path.
4529
4530         * mpw-config.in (varargs.h): Don't create.
4531         (sysdep.h): Create using forward-include.
4532         * mpw-make.in (CSEARCH): Add include/mpw to search path.
4533
4534         * mpw-config.in: New file, MPW version of configure.in.
4535         * mpw-make.in: New file, MPW version of Makefile.in.
4536
4537 Fri Mar 31 14:23:38 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
4538
4539         * alpha-dis.c (print_insn_alpha): Put empty statement after
4540         default label.
4541
4542 Tue Mar 21 10:51:40 1995  Jeff Law  (law@snake.cs.utah.edu)
4543
4544         * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4545         (low_sign_extend): Likewise.
4546         (get_field): Delete unused function.
4547         (set_field, deposit_14, deposit_21): Likewise.
4548
4549 Fri Mar 17 15:55:53 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
4550
4551         * i386-dis.c: Support for more pentium opcodes.  From Guy Harris
4552           (guy@netapp.com).
4553
4554 Tue Mar 14 00:52:57 1995  Ken Raeburn  (raeburn@kr-pc.cygnus.com)
4555
4556         Sat Feb 11 17:22:41 1995  Klaus Kaempf  (kkaempf@didymus.rmi.de)
4557
4558         * alpha-opc.h (OSF_ASMCODE): define
4559         print pal-code names as defined in App C of the
4560         Alpha Architecture Reference Manual
4561
4562         * alpha-dis.c: cleaned up output
4563         print stylized code forms as defined in App A.4.3 of the
4564         Alpha Architecture Reference Manual
4565
4566 Wed Mar  8 15:21:14 1995  Ian Lance Taylor  <ian@cygnus.com>
4567
4568         * mips-opc.c: Add new mips4 instructions.  Don't set INSN_RFE for
4569         `rfe'.
4570         * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4571         'N', and 'M'.
4572
4573 Wed Mar  8 02:54:05 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
4574
4575         * m68k-dis.c (opcode): New function.  Returns address of opcode
4576         table entry given index, even if the opcode table was split to
4577         work around gcc bugs.
4578         (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4579         directly.
4580         (BREAK_UP_BIG_DECL): Make secondary array static and const.
4581         (reg_names): Now const.
4582         (print_insn_arg): Arrays cacheFieldName and names now const.
4583         (print_indexed): Array scales now const.
4584
4585 Tue Mar  7 16:41:21 1995  Ian Lance Taylor  <ian@cygnus.com>
4586
4587         * ppc-opc.c: Sort recently added instructions by minor opcode
4588         number within major opcode number.
4589
4590 Mon Mar  6 10:04:36 1995  Jeff Law  (law@snake.cs.utah.edu)
4591
4592         * hppa-dis.c: Include libhppa.h.
4593
4594 Fri Feb 24 19:15:36 1995  Ian Lance Taylor  <ian@cygnus.com>
4595
4596         * mips-opc.c: Change dli to use M_DLI, and add dla.
4597
4598 Mon Feb 20 23:54:38 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4599
4600         * Makefile.in (ALL_MACHINES):  Add w65-dis.o.
4601
4602 Thu Feb 16 17:34:41 1995  Ian Lance Taylor  <ian@cygnus.com>
4603
4604         * mips-opc.c: Add r4650 mul instruction.
4605
4606 Wed Feb 15 15:45:20 1995  Ian Lance Taylor  <ian@cygnus.com>
4607
4608         * mips-opc.c: Add uld and usd macros for unaligned double load and
4609         store.
4610
4611 Tue Feb 14 13:17:37 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
4612
4613         * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4614         mfdcr, mtdcr, icbt, iccci.
4615
4616 Thu Feb  9 12:28:13 1995  Stan Shebs  <shebs@andros.cygnus.com>
4617
4618         * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4619         signed char fields to shorts, more portable.
4620
4621 Wed Feb  8 17:29:29 1995  Stan Shebs  <shebs@andros.cygnus.com>
4622
4623         * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4624         char fields as signed chars, since they may have negative values.
4625
4626 Mon Feb  6 10:52:06 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
4627
4628         * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4629           (mycroft@netbsd.org).
4630
4631 Mon Jan 30 12:38:00 1995  Ian Lance Taylor  <ian@cygnus.com>
4632
4633         From "Logg, Ed" <elogg@ea.com>:
4634         * ppc-opc.c (extract_bdm): Correct parenthezisation.
4635         * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4636         value.
4637
4638 Thu Jan 26 18:32:08 1995  Ian Lance Taylor  <ian@cygnus.com>
4639
4640         * ppc-opc.c: Changes based on patch from David Edelsohn
4641         <edelsohn@mhpcc.edu>.
4642         (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4643         SPR.
4644         (FXM_MASK): Define.
4645         (insert_tbr): New static function.
4646         (extract_tbr): New static function.
4647         (XFXFXM_MASK, XFXM): Define.
4648         (XSPRBAT_MASK, XSPRG_MASK): Define.
4649         (powerpc_opcodes): Add instructions to access special registers by
4650         name.  Add mtcr and mftbu.
4651
4652 Tue Jan 17 10:56:43 1995  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4653
4654         * mips-opc.c (P3): Define.
4655         (mips_opcodes): Add mad and madu.
4656
4657 Sun Jan 15 16:32:59 1995  Steve Chamberlain  <sac@splat>
4658
4659         * configure.in: Add W65 support.
4660         * disassemble.c: Likewise.
4661         * w65-opc.h, w65-dis.c: New files.
4662
4663 Wed Dec 28 22:15:33 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
4664
4665         * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4666         immediates.
4667
4668 Tue Dec 20 11:25:12 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4669
4670         * mips-opc.c: Add dli as a synonym for li.
4671
4672 Thu Dec  8 18:23:31 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
4673
4674         * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4675         print something for reserved opcode values, even if it won't
4676         assemble again.
4677
4678         * mips-dis.c (_print_insn_mips): When initializing, shift right
4679         and mask, to avoid sign extension problems on the Alpha.
4680
4681         * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4682         control registers.
4683
4684 Wed Nov 23 22:34:51 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
4685
4686         * sh-opc.h (mov.l gbr): Get direction right.
4687         * sh-dis.c (print_insn_shx): New function.
4688         (print_insn_shl, print_insn_sh): Call print_insn_shx to
4689         print opcodes with right byte order.
4690
4691 Thu Nov  3 19:32:22 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
4692
4693         * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4694         to avoid conflicts with getopt.
4695
4696 Mon Oct 31 18:48:10 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4697
4698         * hppa-dis.c (print_insn_hppa): Read the instruction using
4699         bfd_getb32, so that it works on a little endian or 64 bit host.
4700         Remove unused local variable op.
4701
4702 Tue Oct 25 17:07:57 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4703
4704         * mips-opc.c: Use or instead of addu for pseudo-op move, since
4705         addu does not work correctly if -mips3.
4706
4707 Wed Oct 19 13:40:16 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4708
4709         * a29k-dis.c (print_special): Add special register names defined
4710         on 29030, 29040 and 29050.
4711         (print_insn): Handle new operand type 'I'.
4712
4713 Wed Oct 12 11:59:55 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4714
4715         * Makefile.in (INSTALL): Use top level install.sh script.
4716
4717 Wed Oct  5 19:16:29 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4718
4719         * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4720         that it works on a little endian host.
4721
4722 Tue Oct  4 12:14:21 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4723
4724         * configure.in: Use ${config_shell} when running config.bfd.
4725
4726 Wed Sep 21 18:49:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
4727
4728         * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4729
4730 Thu Sep 15 16:30:22 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
4731
4732         * a29k-dis.c (print_insn): Print the opcode.
4733
4734 Wed Sep 14 17:52:14 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
4735
4736         * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4737
4738 Sun Sep 11 22:32:17 1994  Jeff Law  (law@snake.cs.utah.edu)
4739
4740         * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4741
4742 Tue Sep  6 11:37:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
4743
4744         * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4745         which store a value into memory.
4746
4747 Sun Sep 04 17:58:10 1994  Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4748
4749         * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4750         * arm-dis.c, arm-opc.h: New files.
4751
4752 Fri Aug  5 14:00:05 1994  Stan Shebs  (shebs@andros.cygnus.com)
4753
4754         * Makefile.in (ns32k-dis.o): Add dependency.
4755         * ns32k-dis.c (print_insn_arg): Declare initialized local as
4756         string, not as array of chars.
4757
4758 Thu Jul 28 18:14:16 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
4759
4760         * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4761
4762         * sparc-opc.c: Added sparclite extended FP operations, and
4763         versions of v9 impdep* instructions permitting specification of
4764         the OPF field.
4765
4766 Tue Jul 26 16:36:03 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
4767
4768         * i960-dis.c (reg_names): Now const.
4769         (struct sparse_tabent): New type, copied from array type in mem
4770         function.
4771         (ctrl): Local static array ctrl_tab now const.
4772         (cobr): Local static array cobr_tab now const.
4773         (mem): Local variables reg1, reg2, reg3 now point to const.  Local
4774         static variable mem_tab no longer explicitly initialized.  Changed
4775         mem_init to const array of struct sparse_tabent.
4776         (reg): Local static variable reg_tab no longer explicitly
4777         initialized.  Changed reg_init to const array of struct
4778         sparse_tabent.
4779         (ea): Local static array scale_tab now const.
4780
4781         * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4782         (REG_MAX): Updated.
4783
4784 Tue Jul 19 21:00:00 1994  DJ Delorie (dj@ctron.com)
4785
4786         * configure.bat: the disassember needs to be enabled for
4787         "objdump -d" to work in djgpp.
4788
4789 Wed Jul 13 18:01:58 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
4790
4791         * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4792         (invalid_float): Enabled general version, doesn't require running
4793         on ns32k host.  Changed to take char* argument, and test for
4794         explicitly specified sizes, instead of using sizeof() on host CPU
4795         types.
4796         (INVALID_FLOAT): Cast first argument.
4797         (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4798         list_P032, list_M032): Now const.
4799         (optlist, list_search): Made appropriate arguments now point to
4800         const.
4801         (print_insn_arg): Changed static array of one-character-string
4802         pointers into a static const array of characters; fixed sprintf
4803         statement accordingly.
4804
4805 Sun Jul 10 00:27:47 1994  Ian Dall  (dall@hfrd.dsto.gov.au)
4806
4807         * opcodes/ns32k-dis.c: Semi-new file.  Had apparently been dropped
4808         from distribution. A ns32k-dis.c from a previous distribution has
4809         been brought up to date and supports the new interface.
4810
4811         * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4812
4813         * configure.in: add bfd_ns32k_arch target support.
4814
4815         * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4816         Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4817
4818 Wed Jun 29 22:10:37 1994  Steve Chamberlain  (sac@cygnus.com)
4819
4820         * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4821         disassembly right.
4822
4823 Tue Jun 28 13:22:06 1994  Stan Shebs  (shebs@andros.cygnus.com)
4824
4825         * h8300-dis.c, mips-dis.c: Don't use true and false.
4826
4827 Thu Jun 23 12:53:19 1994  David J. Mackenzie  (djm@rtl.cygnus.com)
4828
4829         * configure.in: Change --with-targets to --enable-targets.
4830
4831 Wed Jun 22 13:38:32 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
4832
4833         * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4834         opcodes to the first instruction with that opcode, to speed
4835         disassembly of large files.  From ralphc@pyramid.com (Ralph
4836         Campbell).
4837
4838 Tue Jun  7 12:49:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4839
4840         * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4841
4842 Wed May 11 22:32:00 1994  DJ Delorie (dj@ctron.com)
4843
4844         * configure.bat: update to latest makefile.in
4845
4846 Sat May  7 17:13:21 1994  Steve Chamberlain  (sac@cygnus.com)
4847
4848         * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4849         * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4850         * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4851         slot insn is in a delay slot.
4852         * z8k-opc.h: (resflg): Fix patterns.
4853         * h8500-opc.h Fix CR insn patterns.
4854
4855 Fri May  6 14:34:46 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4856
4857         * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4858         "cmpl" before POWER versions, so that gas -many uses them.
4859
4860 Thu Apr 28 18:32:36 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
4861
4862         * disassemble.c: New file.
4863         * Makefile.in (OFILES): Add disassemble.o.
4864         (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4865         * configure.in: Define ARCHDEFS in Makefile.  Code taken from
4866         binutils/configure.in.
4867
4868         * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4869         opcode being examined.
4870
4871 Thu Apr 21 17:08:40 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4872
4873         * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4874         (insert_ral, insert_ram, insert_ras): New functions.
4875         (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4876         RAS for store with update.
4877
4878 Sat Apr 16 23:41:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4879
4880         * ppc-opc.c (powerpc_opcodes): Correct fcir.  From David Edelsohn
4881         (edelsohn@npac.syr.edu).
4882
4883 Wed Apr  6 17:11:45 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4884
4885         * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4886         immediate argument.
4887
4888 Mon Apr  4 16:30:46 1994  Doug Evans  (dje@canuck.cygnus.com)
4889
4890         * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4891
4892 Mon Apr  4 13:22:00 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4893
4894         * ppc-opc.c (powerpc_operands): The signedp field has been
4895         removed, so don't initialize it.  Set the PPC_OPERAND_SIGNED flag
4896         instead.  Add new operand SISIGNOPT.
4897         (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4898         Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4899         * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4900         than signedp field.
4901
4902 Wed Mar 30 00:31:49 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4903
4904         * i386-dis.c (struct private):  Renamed to dis_private. `private'
4905         is a reserved word for dynix cc.
4906
4907 Mon Mar 28 13:00:15 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4908
4909         * configure.in: Change error message to refer to bfd/config.bfd
4910         rather than bfd/configure.in.
4911
4912 Mon Mar 28 12:28:30 1994  David Edelsohn  (edelsohn@npac.syr.edu)
4913
4914         * ppc-opc.c: Define POWER2 as short alias flag.
4915         (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4916         fsqrt.
4917
4918 Wed Mar 23 12:23:05 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4919
4920         * i960-dis.c (print_insn_i960): Don't read a second word for
4921         opcodes 0, 1, 2 and 3.
4922
4923 Wed Mar 16 15:37:58 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4924
4925         * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4926
4927 Mon Mar 14 14:53:50 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4928
4929         * m68881-ext.c: Removed; no longer used.
4930         * Makefile.in: Changed accordingly.
4931
4932         * m68k-dis.c (ext_format_68881): Don't declare.
4933         (print_insn_m68k): If an instruction uses place 'i', it uses at
4934         least four fixed bytes.
4935         (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'.  For
4936         extended float, convert to double using floatformat_to_double, not
4937         ieee_extended_to_double, and fetch the data before converting it.
4938
4939 Tue Mar  8 18:12:25 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4940
4941         * mips-opc.c: It's sqrt.s, not sqrt.w.  From
4942         davidj@ICSI.Berkeley.EDU (David Johnson).
4943
4944 Tue Feb  8 16:55:27 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4945
4946         * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4947         PowerPC uses bdnz[l][a].
4948
4949 Tue Feb  8 00:32:28 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4950
4951         * dis-buf.c, i386-dis.c:  Include sysdep.h.
4952
4953 Mon Feb  7 19:22:23 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4954
4955         * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4956
4957         * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4958         by Motorola PowerPC 601 with PPC_OPCODE_601.
4959         * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4960         Disassemble Motorola PowerPC 601 instructions as well as normal
4961         PowerPC instructions.
4962
4963 Sun Feb  6 07:45:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
4964
4965         * i960-dis.c (reg, mem): Just use a static array instead of
4966         calling xmalloc.
4967
4968 Sat Feb  5 00:04:02 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
4969
4970         * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4971         condition name index if this is for a negated condition.
4972
4973         * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4974         Floating point format for 'H' operand is backwards from normal
4975         case (0 == double, 1 == single).  For '4', '6', '7', '9', and '8'
4976         operands (fmpyadd and fmpysub), handle bizarre register
4977         translation correctly for single precision format.
4978
4979         * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4980         or 'I' operands if the next format specifier is 'M' (fcmp
4981         condition completer).
4982
4983 Feb  4 23:38:03 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4984
4985         * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4986         single number giving a bitmask for the MB and ME fields of an M
4987         form instruction.  Change NB to accept 32, and turn it into 0;
4988         also turn 0 into 32 when disassembling.  Seperated SH from NB.
4989         (insert_mbe, extract_mbe): New functions.
4990         (insert_nb, extract_nb): New functions.
4991         (SC_MASK): Mask out SA and LK bits.
4992         (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4993         RA, SI.  Change "liu" and "cau" to use UI rather than SI.  Mark
4994         "bctr" and "bctrl" as accepted by POWER.  Change "rlwimi",
4995         "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4996         "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4997         use MBE rather than MB.  Add "mfmq" and "mtmq" POWER instructions.
4998         (powerpc_macros): Define table of macro definitions.
4999         (powerpc_num_macros): Define.
5000
5001         * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
5002         if PPC_OPERAND_NEXT is set.
5003
5004 Sat Jan 22 23:10:07 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5005
5006         * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
5007         char.  Retrieve contents using bfd_getl32 instead of shifting.
5008
5009 Fri Jan 21 19:01:39 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5010
5011         * ppc-opc.c: New file.  Opcode table for PowerPC, including
5012         opcodes for POWER (RS/6000).
5013         * ppc-dis.c: New file.  PowerPC and Power (RS/6000) disassembler.
5014         * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
5015         (CFILES): Add ppc-dis.c.
5016         (ppc-dis.o, ppc-opc.o): New targets.
5017         * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
5018
5019 Mon Jan 17 20:05:49 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
5020
5021         * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
5022         No space before 'u', 'f', or 'N'.
5023
5024 Sun Jan 16 14:20:16 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
5025
5026         * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
5027         farther than we should.
5028
5029         * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
5030
5031 Thu Jan  6 12:38:05 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
5032
5033         * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
5034
5035 Wed Jan  5 11:56:21 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
5036
5037         * i960-dis.c (print_insn_i960): Only read word2 if the instruction
5038         needs it, to prevent reading past the end of a section.
5039
5040 Wed Nov 17 17:20:12 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5041
5042         * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
5043         Removed t,A case for la; always use t,A(b) case.
5044
5045 Mon Nov  8 12:37:36 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5046
5047         From Ted Lemen <mellon@pepper.ncd.com>
5048         * mips-dis.c (print_insn_arg): Handle 'k'.
5049         * mips-opc.c: Make cache use k, not t.
5050
5051 Sun Nov  7 23:52:34 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
5052
5053         * alpha-opc.h, alpha-dis.c (print_insn_alpha):  Add
5054         FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
5055         FLOAT_FORMAT_CODE to put out floating point register names.
5056
5057 Mon Nov  1 18:17:51 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5058
5059         * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
5060
5061 Thu Oct 28 17:42:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5062
5063         * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
5064
5065 Wed Oct 27 11:48:01 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5066
5067         * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
5068         larger than 32.  Moved dsxx32 variants first for disassembler.
5069
5070 Mon Oct 25 11:33:14 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
5071
5072         * z8kgen.c, z8k-opc.h: Add full lda information.
5073
5074 Tue Oct 19 12:39:25 1993  Jeffrey A Law  (law@cs.utah.edu)
5075
5076         * hppa-dis.c (print_insn_hppa): Do not emit a space after
5077         movb instructions.  Any necessary space will be emitted by
5078         the code to handle nullification completers.
5079
5080 Wed Oct 13 16:19:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5081
5082         * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
5083
5084 Fri Oct  8 02:34:21 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
5085
5086         * alpha-opc.h:  Add ldl_l, fix typo for ldq_u.
5087         * alpha-dis.c (print_insn_alpha):  Add code for PAL_FORMAT_CODE.
5088
5089 Tue Oct  5 17:47:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5090
5091         * mips-opc.c: Correct lwu opcode value (book had it wrong).
5092
5093 Thu Sep 30 11:26:18 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
5094
5095         * z8k-dis.c (FETCH_DATA): get just the right amount of data.
5096         (unpack_instr): Cope with ARG_IMM4M1 type instructions.
5097
5098 Wed Sep 29 16:24:49 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
5099
5100         * m88k-dis.c (m88kdis): comment change.  Remove space after
5101           printing mnemonic.
5102           (printop): handle new arg types DEC and XREG for m88110.
5103
5104 Tue Sep 28 19:20:16 1993  Jeffrey A Law (law@snake.cs.utah.edu)
5105
5106         * hppa-dis.c (print_insn_hppa): Handle 'z' operand
5107         type for absolute branch addresses.  Delete special
5108         "ble" and "be" code in 'W' operand code.
5109
5110 Fri Sep 24 14:08:33 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5111
5112         * mips-opc.c: Set hazard information correctly for branch
5113         likely instructions.
5114
5115 Fri Sep 17 04:41:17 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
5116
5117         * alpha-dis.c (print_insn_alpha), alpha-opc.h:  Fix bugs, use
5118         info->fprintf_func for printing and info->print_address_func for
5119         address output.
5120
5121 Wed Sep 15 12:12:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5122
5123         * mips-opc.c: Set INSN_TRAP for tXX instructions.
5124
5125 Thu Sep  9 10:11:27 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5126
5127         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
5128         Corrected second case of "b" for disassembler.
5129
5130 Tue Sep  7 14:25:15 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5131
5132         * mips-dis.c, m88k-dis.c: Don't include libbfd.h.  Changed calls
5133         to BFD swapping routines to correspond to BFD name changes.
5134
5135 Thu Sep  2 10:35:25 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5136
5137         * mips-opc.c: Change div machine instruction to be z,s,t rather
5138         than s,t.  Change div macro to be d,v,t rather than d,s,t.
5139         Likewise for divu, ddiv, ddivu.  Added z,s,t case for drem, dremu,
5140         rem and remu which generates only the corresponding div
5141         instruction.  This is for compatibility with the MIPS assembler,
5142         which only generates the simple machine instruction when an
5143         explicit destination of $0 is used.
5144         * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
5145
5146 Thu Aug 26 17:41:44 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5147
5148         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
5149         WR_31 hazard for bal, bgezal, bltzal.
5150
5151 Thu Aug 26 17:20:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
5152
5153         * hppa-dis.c (print_insn_hppa): Use print function
5154         from within the disassemble_info, not fprintf_filtered.
5155
5156 Wed Aug 25 13:51:40 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5157
5158         * hppa-dis.c (print_insn_hppa): Handle '|' like '>'.  (From Jeff
5159         Law, law@cs.utah.edu.)
5160
5161 Mon Aug 23 12:44:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5162
5163         * mips-opc.c ("absu"): Removed.
5164         ("dabs"): Added.
5165
5166 Fri Aug 20 10:52:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5167
5168         * mips-opc.c: Added r6000 and r4000 instructions and macros.
5169         Changed hazard information to distinguish between memory load
5170         delays and coprocessor load delays.
5171
5172 Wed Aug 18 15:39:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5173
5174         * mips-opc.c: li.d uses "T,L", not "S,F".  Added li.s.
5175
5176 Tue Aug 17 09:44:42 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
5177
5178         * configure.in: Don't pass cpu to config.bfd.
5179
5180 Tue Aug 17 12:23:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5181
5182         * m88k-dis.c (m88kdis): Make class unsigned.
5183
5184 Thu Aug 12 15:08:18 1993  Ian Lance Taylor  (ian@cygnus.com)
5185
5186         * alpha-dis.c (print_insn_alpha): One branch format case was
5187         missing the instruction name.
5188
5189 Wed Aug 11 19:29:39 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
5190
5191         * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
5192         Add the arch-specific auxiliary files.
5193         (OFILES): Remove the arch-specific auxiliary files
5194         and use BFD_MACHINES instead of DIS_LIBS.
5195         * configure.in: Set BFD_MACHINES based on --with-targets option.
5196
5197 Thu Aug 12 12:04:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5198
5199         * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b).  Similarly
5200         for swc1.
5201
5202 Sun Aug  8 15:09:30 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
5203
5204         * sparc-opc.c: Change CONST to const to deal with gcc
5205         -Dconst=__const -traditional.
5206
5207 Fri Aug  6 10:58:55 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5208
5209         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
5210         coprocessor instructions out of #if 0, and made them use new
5211         argument type "C".
5212
5213 Thu Aug  5 17:11:06 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
5214
5215         * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
5216
5217 Fri Jul 30 18:48:15 1993  John Gilmore  (gnu@cygnus.com)
5218
5219         * sparc-opc.c:  Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
5220         instruction, for use by the disassembler.
5221
5222         * sparc-dis.c (SEX):  Add sign extension macro.  Replace many
5223         hand-coded sign extensions that depended on 32-bit host ints.
5224         FIXME, we still depend on big-endian host bitfield ordering.
5225         (sparc_print_insn):  Set the insn_info_valid field, and the
5226         other fields that describe the instruction being printed.
5227
5228 Tue Jul 27 17:04:58 1993  Jim Wilson  (wilson@sphagnum.cygnus.com)
5229
5230         * sparc-opc.c (call): Accept all 6 addressing modes valid for
5231         `jmp' instead of just one of them.
5232
5233 Wed Jul 21 11:43:32 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
5234
5235         * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
5236         (fput_fp_reg_r): Renamed from fput_reg_r.
5237         (fput_fp_reg): New function.
5238         (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5239
5240         * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5241
5242         * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5243
5244 Mon Jul 19 13:52:21 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
5245
5246         * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5247
5248         * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5249         don't output a space.
5250
5251         * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5252
5253 Sun Jul 18 16:30:02 1993  Jim Kingdon  (kingdon@rtl.cygnus.com)
5254
5255         * mips-opc.c: New file, containing opcode table from
5256         ../include/opcode/mips.h.
5257         * Makefile.in: Add it.
5258
5259 Thu Jul 15 12:37:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5260
5261         * m88k-dis.c: New file, moved in from gdb and changed to use the
5262         new dis-asm.h disassembler interface.
5263         * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5264         (m88k-dis.o): New target.
5265
5266 Tue Jul 13 10:04:16 1993  Ian Lance Taylor  (ian@cygnus.com)
5267
5268         * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5269         argument string const char * to correspond to opcode/mips.h.
5270
5271 Tue Jul  6 15:18:37 1993  Ian Lance Taylor  (ian@cygnus.com)
5272
5273         * mips-dis.c: Updated to account for name changes in new version
5274         of opcode/mips.h.
5275         * Makefile.in: Added header file dependencies.
5276
5277 Sat Jul  3 23:47:56 1993  Doug Evans  (dje@canuck.cygnus.com)
5278
5279         * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5280
5281 Thu Jul  1 12:23:38 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
5282
5283         * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5284         extend, rather than shifts.
5285
5286 Sun Jun 20 20:56:56 1993  Ken Raeburn  (raeburn@poseidon.cygnus.com)
5287
5288         * Makefile.in: Undo 15 June change.
5289
5290 Fri Jun 18 14:15:15 1993  Per Bothner  (bothner@deneb.cygnus.com)
5291
5292         * m68k-dis.c (print_insn_arg):  Change return value to byte count
5293         or error code.
5294         * m68k-dis.c:  Re-write to detect invalid operands before
5295         printing anything, so we can handle this the same way we
5296         handle invalid opcodes.
5297
5298 Thu Jun 17 15:01:36 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
5299
5300         * sh-dis.c, sh-opc.h: Understand some more opcodes.
5301
5302 Wed Jun 16 13:48:05 1993  Ian Lance Taylor  (ian@cygnus.com)
5303
5304         * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5305         header files.
5306
5307 Tue Jun 15 21:45:26 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5308
5309         * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5310
5311         * configure.in: Do make sysdep.h link.
5312         * Makefile.in: Search ../include.  Don't search ../bfd.
5313
5314 Tue Jun 15 13:36:10 1993  Stu Grossman  (grossman@cygnus.com)
5315
5316         Changes from Jeff Law, law@cs.utah.edu:
5317         * hppa-dis.c: Fix typo.  'a' and 'd' were reversed.
5318         Do not print a space before the completers specified by
5319         'a' and 'd'.
5320
5321 Fri Jun 11 18:40:21 1993  Ken Raeburn  (raeburn@cygnus.com)
5322
5323         * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5324         defined, since gdb has been fixed.
5325
5326         Changes from Jeff Law, law@cs.utah.edu:
5327         * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5328         fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5329         be a *disassemble_info, not a *FILE.
5330         * hppa-dis.c: Support 'd', '!', and 'a'.
5331         * hppa-dis.c: Support 's' to extract a 2 bit space register.
5332         * hppa-dis.c: Delete cases which are no longer needed.
5333
5334 Fri Jun 11 07:53:48 1993  Jim Kingdon  (kingdon@cygnus.com)
5335
5336         * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5337
5338 Tue Jun  8 12:25:01 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
5339
5340         * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5341         H8/300-H opcodes.
5342
5343 Mon Jun  7 12:58:49 1993  Per Bothner  (bothner@rtl.cygnus.com)
5344
5345         * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5346         * configure.in:  No longer need to configure to get sysdep.h.
5347
5348 Thu Jun  3 15:56:49 1993  Stu Grossman  (grossman@cygnus.com)
5349
5350         * Patches from Jeffrey Law <law@cs.utah.edu>.
5351         * hppa-dis.c: Support 'I', 'J', and 'K' in output
5352         templates for 1.1 FP computational instructions.
5353
5354 Tue May 25 13:05:48 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5355
5356         * h8500-dis.c (print_insn_h8500): Address argument is type
5357         bfd_vma.
5358         * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5359         Ditto.
5360
5361         * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5362         * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5363
5364         * sparc-dis.c (compare_opcodes): Move static declaration to
5365         top-level.
5366
5367 Fri May 21 14:17:37 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
5368
5369         * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5370         instruction, remove unimp hack from 'l' argument.
5371
5372 Wed May 19 15:35:54 1993  Stu Grossman  (grossman@cygnus.com)
5373
5374         * z8k-dis.c (fetch_data):  Use unsigned char to make ancient gcc's
5375         happy.
5376
5377 Fri May 14 15:22:46 1993  Ian Lance Taylor  (ian@cygnus.com)
5378
5379         * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5380         * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5381         instructions.
5382
5383 Fri May 14 00:09:14 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5384
5385         * hppa-dis.c: Include dis-asm.h before sysdep.h.  Changed some
5386         arrays of string pointers to 2-d arrays of chars, to save
5387         space.
5388
5389 Thu May  6 20:51:17 1993  Fred Fish  (fnf@cygnus.com)
5390
5391         * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5392         Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5393
5394 Tue May  4 20:31:10 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5395
5396         * hppa-dis.c: New file from Utah, adapted to new disassembler
5397         calling interface.
5398         * Makefile.in: Include it.
5399
5400 Mon Apr 26 18:17:42 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
5401
5402         * sh-dis.c, sh-opc.h: New files.
5403
5404 Fri Apr 23 18:51:22 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
5405
5406         * alpha-dis.c, alpha-opc.h: New files.
5407
5408 Tue Apr  6 12:54:08 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
5409
5410         * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5411         value.
5412
5413 Mon Apr  5 17:37:37 1993  John Gilmore  (gnu@cygnus.com)
5414
5415         * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5416
5417 Fri Apr  2 07:24:27 1993  Ian Lance Taylor  (ian@cygnus.com)
5418
5419         * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5420         const.
5421
5422 Thu Apr  1 11:20:43 1993  Jim Kingdon  (kingdon@cygnus.com)
5423
5424         * sparc-dis.c: Use fprintf_func a few places where I forgot,
5425         and double percent signs a few places.
5426
5427         * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5428
5429         * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5430         Use info->print_address_func not print_address.
5431
5432         * dis-buf.c (generic_print_address): New function.
5433
5434 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
5435
5436         * Makefile.in: Add sparc-dis.c.
5437         sparc-dis.c: New file, merges binutils and gdb versions as follows:
5438         From GDB:
5439             Add `add' instruction to the set that get checked
5440             for a preceding `sethi' in order to print an absolute address.
5441             * (print_insn):  Disassembly prefers real instructions.
5442             (is_delayed_branch):  Speed up.
5443             * sparc-opcode.h: Add ALIAS bit to aliases.  Fix up opcode tables.
5444             Still missing some float ops, and needs testing.
5445             * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5446             F_ALIAS.  Use printf, not fprintf, when not passing a file
5447             pointer...
5448             (compare_opcodes): Check that identical instructions have
5449             identical opcodes, complain otherwise.
5450         From binutils:
5451             * New 'm' arg.
5452             * Include reg_names.
5453         From neither:
5454             Use dis-asm.h/read_memory_func interface.
5455
5456 Wed Mar 31 20:49:06 1993  K. Richard Pixley  (rich@rtl.cygnus.com)
5457
5458         * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5459           deliberately return non-zero to setjmp from longjmp.  Otherwise
5460           this code fails to compile.
5461
5462 Wed Mar 31 17:04:31 1993  Stu Grossman  (grossman@cygnus.com)
5463
5464         * m68k-dis.c:  Fix prototype for fetch_arg().
5465
5466 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
5467
5468         * dis-buf.c: New file, for new read_memory_func interface.
5469         Makefile.in (OFILES): Include it.
5470         m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5471         Use new read_memory_func interface.
5472
5473 Mon Mar 29 14:02:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
5474
5475         * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5476         * h8500-opc.h: Fix couple of opcodes.
5477
5478 Wed Mar 24 02:03:36 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
5479
5480         * Makefile.in: add dvi & installcheck targets
5481
5482 Mon Mar 22 18:55:04 1993  John Gilmore  (gnu@cygnus.com)
5483
5484         * Makefile.in:  Update for h8500-dis.c.
5485
5486 Fri Mar 19 14:27:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
5487
5488         * h8500-dis.c, h8500-opc.h: New files
5489
5490 Thu Mar 18 14:12:37 1993  Per Bothner  (bothner@rtl.cygnus.com)
5491
5492         * mips-dis.c, z8k-dis.c:  Converted to use interface defined in
5493         ../include/dis-asm.h.
5494         * m68k-dis.c:  New file (merge of ../binutils/m68k-pinsn.c
5495         and ../gdb/m68k-pinsn.c).
5496         * i386-dis.c:  New file (merge of ../binutils/i386-pinsn.c
5497         and ../gdb/i386-pinsn.c).
5498         * m68881-ext.c:  New file.  Moved definition of
5499         ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5500         * Makefile.in:  Adjust for new files.
5501         * i386-dis.c:  Patches from John Hassey (hassey@dg-rtp.dg.com).
5502         * m68k-dis.c:  Recognize '9' placement code, so (say) pflush
5503         can be dis-assembled.
5504
5505 Wed Feb 17 09:19:47 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5506
5507         * mips-dis.c (print_insn_arg): Now returns void.
5508
5509 Mon Jan 11 16:09:16 1993  Fred Fish  (fnf@cygnus.com)
5510
5511         * mips-dis.c (ansidecl.h):  Include for benefit of sysdep.h
5512         files that use the macros.
5513
5514 Thu Jan  7 13:15:17 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5515
5516         * mips-dis.c: New file, from gdb/mips-pinsn.c.
5517         * Makefile.in (DIS_LIBS): Added mips-dis.o.
5518         (CFILES): Added mips-dis.c.
5519
5520 Thu Jan  7 07:36:33 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
5521
5522         * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5523         * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5524
5525 Tue Dec 22 15:42:44 1992  Per Bothner  (bothner@rtl.cygnus.com)
5526
5527         * Makefile.in:  Improve *clean rules.
5528         * configure.in:  Allow a default host.
5529
5530 Tue Nov 17 19:53:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
5531
5532         * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5533         files include other sysdep files
5534
5535 Thu Nov 12 16:10:37 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
5536
5537         * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5538
5539 Fri Oct  9 04:56:05 1992  John Gilmore  (gnu@cygnus.com)
5540
5541         * configure.in:  For host support, use ../bfd/configure.host
5542         so it stays in sync with the ../bfd/hosts database.
5543
5544 Thu Oct  1 23:38:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
5545
5546         * configure.in: use cpu-vendor-os triple instead of nested cases
5547
5548 Wed Sep 30 16:09:20 1992  Michael Werner  (mtw@cygnus.com)
5549
5550         * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5551         *always* the wrong one.
5552
5553 Wed Sep 30 07:42:17 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
5554
5555         * z8kgen.c: added copyright info
5556
5557 Tue Sep 29 12:20:21 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
5558
5559         * z8k-dis.c (unparse_instr): prettier tabs
5560         * z8kgen.c -> z8k-opc.h: bug fixes in tables
5561
5562 Fri Sep 25 12:50:32 1992  Stu Grossman  (grossman at cygnus.com)
5563
5564         * configure.in:  Add ncr* configuration.
5565         * z8k-dis.c (struct instr_data_s):  Make instr_asmsrc char to make
5566         picayune ANSI compilers happy.
5567
5568 Sep 20 08:50:55 1992  Fred Fish  (fnf@cygnus.com)
5569
5570         * configure.in (i386):  Make i386 and i486 synonymous for now.
5571         * configure.in (i[34]86-*-sysv4):  Add my_host definition.
5572
5573 Fri Sep 18 17:01:23 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5574
5575         * Makefile.in (install): Fix typo.
5576
5577 Fri Sep 18 02:04:24 1992  John Gilmore  (gnu@cygnus.com)
5578
5579         * Makefile.in (make):  Remove obsolete crud.
5580         (sparc-opc.o):  Avoid Sun Make VPATH bug.
5581
5582 Tue Sep  8 17:29:27 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
5583
5584         * Makefile.in: since there are no SUBDIRS, remove rule and
5585         references of subdir_do.
5586
5587 Tue Sep  8 17:02:58 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5588
5589         * Makefile.in (install): Get the library name right here too.
5590         Don't install bfd.h, since it's unrelated to this library.  No
5591         subdirs to recurse into, either.
5592         (CFILES): The source file has a .c suffix, not .o.
5593
5594         * sparc-opc.c: New file, moved from BFD.
5595         * Makefile.in (OFILES): Build it.
5596
5597 Thu Sep  3 16:59:20 1992  Michael Werner  (mtw@cygnus.com)
5598
5599         * z8k-dis.c: fixed forward refferences of some declarations.
5600
5601 Mon Aug 31 16:09:45 1992  Michael Werner  (mtw@cygnus.com)
5602
5603         * Makefile.in: get the name of the library right
5604
5605 Mon Aug 31 13:47:35 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
5606
5607         * z8k-dis.c: knows how to disassemble z8k stuff
5608         * z8k-opc.h: new file full of z8000 opcodes
5609
5610 \f
5611 Local Variables:
5612 version-control: never
5613 End: