opcodes/ChangeLog

   1 Wed Sep 20 12:55:28 1995  Ian Lance Taylor  <ian@cygnus.com>
   2
   3         * Makefile.in (maintainer-clean): New synonym for realclean.
   4
   5 Tue Sep 19 15:28:36 1995  Ian Lance Taylor  <ian@cygnus.com>
   6
   7         * m68k-opc.c: Split pmove patterns which use 'P' into patterns
   8         which use '0', '1', and '2' instead.  Specify the proper size for
   9         a pmove immediate operand.  Correct the pmovefd patterns to be
  10         moves to a register, not from a register.
  11         * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
  12
  13 Thu Sep 14 11:58:22 1995  Doug Evans  <dje@canuck.cygnus.com>
  14
  15         * sparc-opc.c (sparc_opcodes): Mark all insns that reference
  16         %psr, %wim, %tbr as F_NOTV9.
  17
  18 Fri Sep  8 01:07:38 1995  Ian Lance Taylor  <ian@cygnus.com>
  19
  20         * Makefile.in (Makefile): Just rebuild Makefile when running
  21         config.status.
  22         (config.h, stamp-h): New targets.
  23         * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
  24         earlier.  Don't bother to call AC_ARG_PROGRAM.  Touch stamp-h when
  25         rebuilding config.h.
  26         * configure: Rebuild.
  27
  28         * mips-opc.c: Change unaligned loads and stores with "t,A"
  29         operands to use "t,A(b)".
  30
  31 start-sanitize-sh3e
  32 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
  33
  34         * sh-dis.c (print_insn_shx): Add F_FR0 support.
  35
  36 end-sanitize-sh3e
  37 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
  38
  39         * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
  40         until 3 instead of until 2.
  41
  42 Wed Sep  6 21:21:33 1995  Ian Lance Taylor  <ian@cygnus.com>
  43
  44         * Makefile.in (ALL_CFLAGS): Define.
  45         (.c.o, disassemble.o): Use $(ALL_CFLAGS).
  46         (MOSTLYCLEAN): Add config.log.
  47         (distclean): Don't remove config.log.
  48         * configure.in: Substitute HDEFINES.
  49         * configure: Rebuild.
  50
  51 start-sanitize-sh3e
  52 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
  53
  54         * sh-opc.h (sh_arg_type): Add F_FR0.
  55         (sh_table, case fmac): Add F_FR0 as first argument.
  56
  57 end-sanitize-sh3e
  58 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
  59
  60         * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
  61
  62 Tue Sep  5 18:28:10 1995  Doug Evans  <dje@canuck.cygnus.com>
  63
  64         * sparc-dis.c: Remove all references to NO_V9.
  65
  66 Tue Sep  5 20:03:26 1995  Ian Lance Taylor  <ian@cygnus.com>
  67
  68         * aclocal.m4: Just include ../bfd/aclocal.m4.
  69         * configure: Rebuild.
  70
  71 Tue Sep  5 16:09:59 1995  Doug Evans  <dje@canuck.cygnus.com>
  72
  73         * sparc-dis.c (X_DISP19): Define.
  74         (print_insn, case 'G'): Use it.
  75         (print_insn, case 'L'): Sign extend displacement.
  76
  77 Mon Sep  4 14:28:46 1995  Ian Lance Taylor  <ian@cygnus.com>
  78
  79         * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
  80         Subsitute CFLAGS and AR.  Call AC_PROG_INSTALL.  Don't substitute
  81         host_makefile_frag or frags.
  82         * aclocal.m4: New file.
  83         * configure: Rebuild.
  84         * Makefile.in (INSTALL): Set to @INSTALL@.
  85         (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
  86         (INSTALL_DATA): Set to @INSTALL_DATA@.
  87         (AR): Set to @AR@.
  88         (AR_FLAGS): Set to rc rather than qc.
  89         (CC): Define as @CC@.
  90         (CFLAGS): Set to @CFLAGS@.
  91         (@host_makefile_frag@): Remove.
  92         (config.status): Remove dependency upon @frags@.
  93
  94         * configure.in: ../bfd/config.bfd now just sets shell variables.
  95         Use them rather than looking through target Makefile fragments.
  96         * configure: Rebuild.
  97
  98 start-sanitize-sh3e
  99 Thu Aug 31 12:35:32 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 100
 101         * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
 102
 103 end-sanitize-sh3e
 104 Wed Aug 30 13:52:28 1995  Doug Evans  <dje@canuck.cygnus.com>
 105
 106         * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
 107         Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
 108         sparc64 insns.
 109
 110         * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
 111         (lookup_{name,value}): New functions.
 112         (prefetch_table): New static local.
 113         (sparc_{encode,decode}_prefetch): New functions.
 114         * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
 115
 116 start-sanitize-sh3e
 117 Wed Aug 30 11:11:58 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 118
 119         * sh-opc.h: Add blank lines to improve readabililty of sh3e
 120         instructions.
 121
 122 end-sanitize-sh3e
 123 Wed Aug 30 11:09:38 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 124
 125         * sh-dis.c: Correct comment on first line of file.
 126
 127 Tue Aug 29 15:37:18 1995  Doug Evans  <dje@canuck.cygnus.com>
 128
 129         * disassemble.c (disassembler): Handle bfd_mach_sparc64.
 130
 131         * sparc-opc.c (asi, membar): New static locals.
 132         (sparc_{encode,decode}_{asi,membar}): New functions.
 133         (sparc_opcodes, membar insn): Fix.
 134         * sparc-dis.c (print_insn): Call sparc_decode_asi.
 135         Support decoding of membar masks.
 136         (X_MEMBAR): Define.
 137
 138 Sat Aug 26 21:22:48 1995  Ian Lance Taylor  <ian@cygnus.com>
 139
 140         * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
 141
 142 Mon Aug 21 17:33:36 1995  Ian Lance Taylor  <ian@cygnus.com>
 143
 144         * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
 145         and likewise for the other branches.  Add bhs as an alias for bcc,
 146         and likewise for the size variants.  Add dbhs as an alias for
 147         dbcc.
 148
 149 start-sanitize-sh3e
 150 Fri Aug 11 13:40:24 1995  Jeff Law  (law@snake.cs.utah.edu)
 151
 152         * sh-opc.h (FP sts instructions): Update to match reality.
 153
 154 end-sanitize-sh3e
 155 Mon Aug  7 16:12:58 1995  Ian Lance Taylor  <ian@cygnus.com>
 156
 157         * m68k-dis.c: (fpcr_names): Add % before all register names.
 158         (reg_names): Likewise.
 159         (print_insn_arg): Don't explicitly print % before register names.
 160         Add % before register names in static array names.  In case 'r',
 161         print data registers as `@(Dn)', not `Dn@'.  When printing a
 162         memory address, don't print @# before it.
 163         (print_indexed): Change base_disp and outer_disp from int to
 164         bfd_vma.  Print using MIT syntax, not mutant invalid Motorola
 165         syntax.  Sign extend 8 byte displacement correctly.
 166         (print_base): Print using MIT syntax.  Print zpc when appropriate.
 167         Change parameter disp from int to bfd_vma.
 168
 169         * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
 170         for jsr.
 171
 172 start-sanitize-sh3e
 173 Mon Aug  7 02:21:40 1995  Jeff Law  (law@snake.cs.utah.edu)
 174
 175         * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
 176         F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
 177         * sh-opc.h (sh_arg_type): Add new operand types.
 178         (sh_table): Add new opcodes from SH3E Floating Point ISA.
 179
 180 end-sanitize-sh3e
 181 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
 182
 183         * Makefile.in (distclean): Remove generated file config.h.
 184
 185 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
 186
 187         * Makefile.in (distclean): Remove generated file config.h.
 188
 189 Wed Aug  2 18:33:40 1995  Ian Lance Taylor  <ian@cygnus.com>
 190
 191         * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
 192         Clean up tables.
 193         * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
 194         (opcode): Remove.
 195         (print_insn_m68k): Change d to be const.  Use m68k_numopcodes
 196         rather than numopcodes.  Use m68k_opcodes rather than removed
 197         opcode function.  Don't check F_ALIAS.
 198         (print_insn_arg): Change first parameter to be const char *.
 199         * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
 200         (m68k-opc.o): New target.
 201         * configure.in: Build m68k-opc.o for bfd_m68k_arch.
 202         * configure: Rebuild.
 203
 204 Wed Aug  2 08:23:38 1995  Doug Evans  <dje@canuck.cygnus.com>
 205
 206         * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
 207         (opcode_bits, opcode_hash_table): New variables.
 208         (opcodes_initialized): Renamed from opcodes_sorted.
 209         (build_hash_table): New function.
 210         (is_delayed_branch): Use hash table.
 211         (print_insn): Renamed from print_insn_sparc, made static.
 212         Build and use hash table.  If !sparc64, ignore sparc64 insns,
 213         and vice-versa if sparc64.
 214         (print_insn_sparc, print_insn_sparc64): New functions.
 215         (compare_opcodes): Move sparc64 opcodes to end.
 216         Print commutative insns with constant second.
 217         * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
 218
 219 Tue Aug  1 00:12:49 1995  Ian Lance Taylor  <ian@cygnus.com>
 220
 221         * sh-dis.c (print_insn_shx): Remove unused local dslot.  Use
 222         print_address_func for A_BDISP12 and A_BDISP8.  Correct test which
 223         avoids printing a delay slot in a delay slot.
 224         * sh-opc.h (sh_table): Fully bracket last entry.
 225
 226 Mon Jul 31 12:04:47 1995  Doug Evans  <dje@canuck.cygnus.com>
 227
 228         * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
 229
 230 Wed Jul 12 00:59:34 1995  Ken Raeburn  <raeburn@kr-pc.cygnus.com>
 231
 232         * configure.in: Get host_makefile_frag from ${srcdir}.
 233
 234         * configure.in: Autoconfiscated.  Check for string[s].h.  Create
 235         config.h from config.in.  Don't set up sysdep.h link.
 236         * sysdep.h: New file.
 237         * configure, config.in: New files, generated from configure.in.
 238         * Makefile.in: Updated to be processed autoconf-style.
 239         (distclean): Keep sysdep.h.  Remove config.log and config.cache.
 240         (Makefile): Depend on config.status.
 241         (config.status): New rule.
 242         * configure.bat: Update Makefile substitutions.
 243
 244 Tue Jul 11 14:23:37 1995  Jeff Spiegel  <jeffs@lsil.com>
 245
 246         * mips-opc.c (L1): Define.
 247         (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
 248         addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
 249         and wb.
 250
 251 Tue Jul 11 11:49:49 1995  Ian Lance Taylor  <ian@cygnus.com>
 252
 253         * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
 254         if ISA 3 and addu otherwise, replacing or, since some MIPS chips
 255         have multiple add units but only a single logical unit.
 256
 257         * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
 258         shifted by 18, without any insertion or extraction function.
 259         (insert_cr, extract_cr): Remove.
 260
 261 start-sanitize-arc
 262 Mon Jul  3 11:54:31 1995  Ian Lance Taylor  <ian@cygnus.com>
 263
 264         * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
 265
 266 end-sanitize-arc
 267 Wed Jun 21 20:05:39 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 268
 269         * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
 270         register names.
 271
 272 Thu Jun 15 17:23:31 1995  Stan Shebs  <shebs@andros.cygnus.com>
 273
 274         * mpw-config.in: Add sh and i386 configs, remove sparc config.
 275         * sh-opc.h: Add copyright.
 276
 277 Mon Jun  5 03:30:43 1995  Ken Raeburn  <raeburn@kr-laptop.cygnus.com>
 278
 279         * Makefile.in (crunch-m68k): Delete extra target accidentally
 280         checked in a while ago.
 281
 282 Wed May 24 16:22:13 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 283
 284         * sh-opc.h (sh_table): Add SH3 support.
 285
 286 Wed May 24 14:16:08 1995  Steve Chamberlain  <sac@slash.cygnus.com>
 287
 288         * sh-opc.h: Added bsrf and braf.
 289
 290 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
 291
 292         * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns.  Delete
 293         bogus [ls]fm{ea,fd} patterns.
 294
 295         * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
 296         * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
 297         initialize it from memory.  Make function static.
 298         (print_insn_{big,little}_arm): New functions.
 299         * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
 300         the correct endianness.
 301
 302 start-sanitize-arc
 303 Sat Apr 29 23:20:05 1995  Doug Evans  <dje@chestnut.cygnus.com>
 304
 305         * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
 306         (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
 307 end-sanitize-arc
 308
 309 Mon Apr 24 14:18:05 1995  Jason Molenda   (crash@phydeaux.cygnus.com>
 310
 311         * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
 312         enum list.
 313
 314 Wed Apr 19 14:07:03 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
 315
 316         * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
 317         17th, so that it builds again using GCC as the compiler.
 318
 319 Tue Apr 18 12:14:51 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 320
 321         * mips-dis.c (print_insn_little_mips): Cast return value from
 322         bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
 323         expects an unsigned long, and that might be fewer words of
 324         argument storage (e.g., if bfd_vma is long long on a 32-bit
 325         machine).
 326         (print_insn_big_mips): Likewise with bfd_getb32 value.
 327         (_print_insn_mips): Now static.
 328
 329 Mon Apr 17 12:23:28 1995  Kung Hsu  <kung@rtl.cygnus.com>
 330
 331         * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
 332         gcc memory hog problem with initializer is fixed.
 333
 334 start-sanitize-arc
 335 Wed Apr 12 09:04:12 1995  Doug Evans  <dje@canuck.cygnus.com>
 336
 337         * arc-opc.c (NULL): Define.
 338         (arc_operands, insn fields u,s): Delete.
 339         (arc_operands, insn fields a,b,c): Mark as signed.
 340         (arc_opcodes): No longer const, links computed at run-time.
 341         (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
 342         suffixes that affect the insn code.
 343         (arc_opcodes): Resort table to macros are first.
 344         (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
 345         (arc_opcodes, st [b] entry): Likewise.
 346         (arc_opcodes, st [b,d] entry): Fix mask, value.
 347         (arc_reg_names): Add entries for r29, r30, r31, r60.
 348         (opcode_map, icode_map): New static globals.
 349         (arc_opcode_init_tables): Initialize them.
 350         (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
 351         (insert_shimmoffset): Signal error if register present.
 352         Validate constant.
 353         * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
 354 end-sanitize-arc
 355
 356 Mon Apr 10 15:55:01 1995  Stan Shebs  <shebs@andros.cygnus.com>
 357
 358         Merge in support for Mac MPW as a host.
 359         (Old change descriptions retained for informational value.)
 360
 361         * mpw-config.in (archname): Compute from the config.
 362         (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
 363
 364         * mpw-config.in (target_arch): Compute from canonical target.
 365         (m68k, mips, powerpc, sparc): Add architectures.
 366         * mpw-make.in (disassemble.c.o): Add.
 367         (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
 368
 369         * mpw-config.in (BFD_MACHINES): Set to a default value.
 370         * mpw-make.in (BFD_MACHINES): Remove wired-in value.
 371
 372         * mpw-make.in (CSEARCH): Add extra-include to search path.
 373
 374         * mpw-config.in (varargs.h): Don't create.
 375         (sysdep.h): Create using forward-include.
 376         * mpw-make.in (CSEARCH): Add include/mpw to search path.
 377
 378         * mpw-config.in: New file, MPW version of configure.in.
 379         * mpw-make.in: New file, MPW version of Makefile.in.
 380
 381 start-sanitize-arc
 382 Thu Apr  6 20:36:08 1995  Doug Evans  <dje@chestnut.cygnus.com>
 383
 384         * arc-dis.c (print_insn): New parameter `big_p'.  Callers updated.
 385         Call arc_get_opcode_mach to map bfd mach number to opcode value.
 386         (print_insn_*): Pass bfd mach number, not opcode version.
 387         * arc-opc.c (arc_get_opcode_mach): New function.
 388 end-sanitize-arc
 389
 390 Fri Mar 31 14:23:38 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 391
 392         * alpha-dis.c (print_insn_alpha): Put empty statement after
 393         default label.
 394
 395 Tue Mar 21 10:51:40 1995  Jeff Law  (law@snake.cs.utah.edu)
 396
 397         * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
 398         (low_sign_extend): Likewise.
 399         (get_field): Delete unused function.
 400         (set_field, deposit_14, deposit_21): Likewise.
 401
 402 Fri Mar 17 15:55:53 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
 403
 404         * i386-dis.c: Support for more pentium opcodes.  From Guy Harris
 405           (guy@netapp.com).
 406
 407 Tue Mar 14 00:52:57 1995  Ken Raeburn  (raeburn@kr-pc.cygnus.com)
 408
 409         Sat Feb 11 17:22:41 1995  Klaus Kaempf  (kkaempf@didymus.rmi.de)
 410
 411         * alpha-opc.h (OSF_ASMCODE): define
 412         print pal-code names as defined in App C of the
 413         Alpha Architecture Reference Manual
 414
 415         * alpha-dis.c: cleaned up output
 416         print stylized code forms as defined in App A.4.3 of the
 417         Alpha Architecture Reference Manual
 418
 419 Wed Mar  8 15:21:14 1995  Ian Lance Taylor  <ian@cygnus.com>
 420
 421         * mips-opc.c: Add new mips4 instructions.  Don't set INSN_RFE for
 422         `rfe'.
 423         * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
 424         'N', and 'M'.
 425
 426 Wed Mar  8 02:54:05 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 427
 428         * m68k-dis.c (opcode): New function.  Returns address of opcode
 429         table entry given index, even if the opcode table was split to
 430         work around gcc bugs.
 431         (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
 432         directly.
 433         (BREAK_UP_BIG_DECL): Make secondary array static and const.
 434         (reg_names): Now const.
 435         (print_insn_arg): Arrays cacheFieldName and names now const.
 436         (print_indexed): Array scales now const.
 437
 438 start-sanitize-arc
 439 Tue Mar  7 21:14:14 1995  Doug Evans  <dje@chestnut.cygnus.com>
 440
 441         * arc-dis.c (print_insn_arc_base): Split into big and little fns.
 442         (print_insn_arc_{host,graphics,audio}): Likewise.
 443         (print_insn): Add prototype.
 444         (arc_get_disassembler): New arg `big_p'.  Return little or big
 445         print fn accordingly.
 446         * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
 447         (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
 448         (arc_opval_supported): Likewise.
 449         * disassemble.c (disassembler): Pass big endian flag to
 450         arc_get_disassembler.
 451 end-sanitize-arc
 452
 453 Tue Mar  7 16:41:21 1995  Ian Lance Taylor  <ian@cygnus.com>
 454
 455         * ppc-opc.c: Sort recently added instructions by minor opcode
 456         number within major opcode number.
 457
 458 Mon Mar  6 10:04:36 1995  Jeff Law  (law@snake.cs.utah.edu)
 459
 460         * hppa-dis.c: Include libhppa.h.
 461
 462 Fri Feb 24 19:15:36 1995  Ian Lance Taylor  <ian@cygnus.com>
 463
 464         * mips-opc.c: Change dli to use M_DLI, and add dla.
 465
 466 Mon Feb 20 23:54:38 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 467
 468         * Makefile.in (ALL_MACHINES):  Add w65-dis.o.
 469
 470 start-sanitize-arc
 471 Fri Feb 17 12:42:25 1995  Doug Evans  <dje@chestnut.cygnus.com>
 472
 473         * arc-dis.c (arc_get_disassembler): Change argument to int,
 474         one of bfd_mach_arc_xxx.  All callers updated.
 475 end-sanitize-arc
 476
 477 Thu Feb 16 17:34:41 1995  Ian Lance Taylor  <ian@cygnus.com>
 478
 479         * mips-opc.c: Add r4650 mul instruction.
 480
 481 Wed Feb 15 15:45:20 1995  Ian Lance Taylor  <ian@cygnus.com>
 482
 483         * mips-opc.c: Add uld and usd macros for unaligned double load and
 484         store.
 485
 486 Tue Feb 14 13:17:37 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
 487
 488         * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
 489         mfdcr, mtdcr, icbt, iccci.
 490
 491 start-sanitize-arc
 492 Mon Feb 13 11:09:17 1995  Doug Evans  <dje@canuck.cygnus.com>
 493
 494         * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
 495         * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
 496         ('L' operand): Mark as ARC_OPERAND_ADDRESS.
 497         (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
 498         (arc_opcodes, ld/st insns): Fix address writeback operand letter.
 499         (insert_absaddr): New function.
 500
 501 Thu Feb  9 19:19:23 1995  Doug Evans  <dje@canuck.cygnus.com>
 502
 503         * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
 504         New argument `cpu', pass it to arc_opcode_init_tables.
 505         Document byte order dependencies.  Ignore unsupported insns.
 506         (arc_get_disassembler): New function.
 507         (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
 508         print_insn_arc_audio): New functions.
 509         * arc-opc.c (MULTSHIFT operand): Delete.
 510         (UNSIGNED, SATURATION): New operands.
 511         (mac, mul, mul64, mulu64): New insns.
 512         (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
 513         (padc, padd, pmov, pand, psbc, psub, swap): New insns.
 514         (host,graphics,audio extended and auxiliary regs): Define.
 515         (ss, sc, mh, ml): New suffixes.
 516         (arc_opcode_supported, arc_opval_supported): New functions.
 517         (insert_multshift, extract_multshift): Deleted.
 518         * disassemble.c (disassembler, case bfd_arch_arc): Call
 519         arc_get_disassembler to get disassembler routine.
 520 end-sanitize-arc
 521
 522 Thu Feb  9 12:28:13 1995  Stan Shebs  <shebs@andros.cygnus.com>
 523
 524         * i960-dis.c (struct tabent, struct sparse_tabent): Change the
 525         signed char fields to shorts, more portable.
 526
 527 Wed Feb  8 17:29:29 1995  Stan Shebs  <shebs@andros.cygnus.com>
 528
 529         * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
 530         char fields as signed chars, since they may have negative values.
 531
 532 Mon Feb  6 10:52:06 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
 533
 534         * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
 535           (mycroft@netbsd.org).
 536
 537 Mon Jan 30 12:38:00 1995  Ian Lance Taylor  <ian@cygnus.com>
 538
 539         From "Logg, Ed" <elogg@ea.com>:
 540         * ppc-opc.c (extract_bdm): Correct parenthezisation.
 541         * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
 542         value.
 543
 544 Thu Jan 26 18:32:08 1995  Ian Lance Taylor  <ian@cygnus.com>
 545
 546         * ppc-opc.c: Changes based on patch from David Edelsohn
 547         <edelsohn@mhpcc.edu>.
 548         (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
 549         SPR.
 550         (FXM_MASK): Define.
 551         (insert_tbr): New static function.
 552         (extract_tbr): New static function.
 553         (XFXFXM_MASK, XFXM): Define.
 554         (XSPRBAT_MASK, XSPRG_MASK): Define.
 555         (powerpc_opcodes): Add instructions to access special registers by
 556         name.  Add mtcr and mftbu.
 557
 558 Tue Jan 17 10:56:43 1995  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 559
 560         * mips-opc.c (P3): Define.
 561         (mips_opcodes): Add mad and madu.
 562
 563 Sun Jan 15 16:32:59 1995  Steve Chamberlain  <sac@splat>
 564
 565         * configure.in: Add W65 support.
 566         * disassemble.c: Likewise.
 567         * w65-opc.h, w65-dis.c: New files.
 568
 569 Wed Dec 28 22:15:33 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
 570
 571         * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
 572         immediates.
 573
 574 start-sanitize-arc
 575 Tue Dec 20 10:36:55 1994  Doug Evans  <dje@canuck.cygnus.com>
 576
 577         * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
 578         slot.
 579         * arc-opc.c (extract_reladdr): New function.
 580         (insert_reladdr): Store address right-shifted by 2.
 581 end-sanitize-arc
 582
 583 Tue Dec 20 11:25:12 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 584
 585         * mips-opc.c: Add dli as a synonym for li.
 586
 587 start-sanitize-arc
 588 Mon Dec 19 12:35:51 1994  Doug Evans  <dje@canuck.cygnus.com>
 589
 590         * arc-opc.c (insertion fns): Pass pointer to value's table entry.
 591         All uses changed.
 592         (extraction fns): Insn argument now array of two words.  Return pointer
 593         to value's table entry.  All uses changed.
 594         (arc_opcode_lookup_suffix): Exported for arc-dis.c.
 595         (insert_multshift, extract_multshift): New fns.
 596         (arc_operands): Add support for cache bypass suffix.  Add support for
 597         predefined aux regs.  Modifier bits moved to flags field.
 598         (arc_opcodes): Likewise.
 599         Add mul/mulu/shift insns.  Syntax of zero/sign extension insns changed.
 600         New insn rlc.  Update to syntax in programmer's manual.
 601         (arc_reg_names): Fix typo in lp_count.  Add predefined aux regs.
 602         (arc_suffixes): New synonyms lo,hs for cs,cc.  New suffix for cache
 603         bypass.
 604         (arc_opcode_init_tables): New argument to indicate cpu type.
 605         (insert_reg): Handle predefined aux regs.
 606         (extract_reg): Likewise.
 607         (lookup_register): New fn.
 608         * arc-dis.c (arc_condition_codes): Deleted.
 609         (print_insn_arc): Handle insns with 32 bit immediate constants better.
 610         Clean up modifier handling.  Handle predefined aux regs.
 611 end-sanitize-arc
 612
 613 Thu Dec  8 18:23:31 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
 614
 615         * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
 616         print something for reserved opcode values, even if it won't
 617         assemble again.
 618
 619         * mips-dis.c (_print_insn_mips): When initializing, shift right
 620         and mask, to avoid sign extension problems on the Alpha.
 621
 622         * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
 623         control registers.
 624
 625 start-sanitize-arc
 626 Tue Nov 29 18:02:43 1994  Doug Evans  <dje@canuck.cygnus.com>
 627
 628         * configure.in: Add ARC support.
 629         * disassemble.c: Likewise.
 630         * arc-dis.c, arc-opc.c: New files.
 631 end-sanitize-arc
 632
 633 Wed Nov 23 22:34:51 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
 634
 635         * sh-opc.h (mov.l gbr): Get direction right.
 636         * sh-dis.c (print_insn_shx): New function.
 637         (print_insn_shl, print_insn_sh): Call print_insn_shx to
 638         print opcodes with right byte order.
 639
 640 Thu Nov  3 19:32:22 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
 641
 642         * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
 643         to avoid conflicts with getopt.
 644
 645 Mon Oct 31 18:48:10 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 646
 647         * hppa-dis.c (print_insn_hppa): Read the instruction using
 648         bfd_getb32, so that it works on a little endian or 64 bit host.
 649         Remove unused local variable op.
 650
 651 Tue Oct 25 17:07:57 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 652
 653         * mips-opc.c: Use or instead of addu for pseudo-op move, since
 654         addu does not work correctly if -mips3.
 655
 656 Wed Oct 19 13:40:16 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 657
 658         * a29k-dis.c (print_special): Add special register names defined
 659         on 29030, 29040 and 29050.
 660         (print_insn): Handle new operand type 'I'.
 661
 662 Wed Oct 12 11:59:55 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 663
 664         * Makefile.in (INSTALL): Use top level install.sh script.
 665
 666 Wed Oct  5 19:16:29 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 667
 668         * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
 669         that it works on a little endian host.
 670
 671 Tue Oct  4 12:14:21 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 672
 673         * configure.in: Use ${config_shell} when running config.bfd.
 674
 675 Wed Sep 21 18:49:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 676
 677         * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
 678
 679 Thu Sep 15 16:30:22 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 680
 681         * a29k-dis.c (print_insn): Print the opcode.
 682
 683 Wed Sep 14 17:52:14 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 684
 685         * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
 686
 687 Sun Sep 11 22:32:17 1994  Jeff Law  (law@snake.cs.utah.edu)
 688
 689         * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
 690
 691 Tue Sep  6 11:37:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 692
 693         * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
 694         which store a value into memory.
 695
 696 Sun Sep 04 17:58:10 1994  Richard Earnshaw (rwe@pegasus.esprit.ec.org)
 697
 698         * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
 699         * arm-dis.c, arm-opc.h: New files.
 700
 701 Fri Aug  5 14:00:05 1994  Stan Shebs  (shebs@andros.cygnus.com)
 702
 703         * Makefile.in (ns32k-dis.o): Add dependency.
 704         * ns32k-dis.c (print_insn_arg): Declare initialized local as
 705         string, not as array of chars.
 706
 707 Thu Jul 28 18:14:16 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
 708
 709         * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
 710
 711         * sparc-opc.c: Added sparclite extended FP operations, and
 712         versions of v9 impdep* instructions permitting specification of
 713         the OPF field.
 714
 715 Tue Jul 26 16:36:03 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
 716
 717         * i960-dis.c (reg_names): Now const.
 718         (struct sparse_tabent): New type, copied from array type in mem
 719         function.
 720         (ctrl): Local static array ctrl_tab now const.
 721         (cobr): Local static array cobr_tab now const.
 722         (mem): Local variables reg1, reg2, reg3 now point to const.  Local
 723         static variable mem_tab no longer explicitly initialized.  Changed
 724         mem_init to const array of struct sparse_tabent.
 725         (reg): Local static variable reg_tab no longer explicitly
 726         initialized.  Changed reg_init to const array of struct
 727         sparse_tabent.
 728         (ea): Local static array scale_tab now const.
 729
 730         start-sanitize-i960xl
 731         * i960-dis.c (reg): Added i960XL instructions to reg_init table.
 732         (REG_MAX): Updated.
 733         end-sanitize-i960xl
 734
 735 Tue Jul 19 21:00:00 1994  DJ Delorie (dj@ctron.com)
 736
 737         * configure.bat: the disassember needs to be enabled for
 738         "objdump -d" to work in djgpp.
 739
 740 Wed Jul 13 18:01:58 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
 741
 742         * ns32k-dis.c: Deleted all code in "#ifdef GDB".
 743         (invalid_float): Enabled general version, doesn't require running
 744         on ns32k host.  Changed to take char* argument, and test for
 745         explicitly specified sizes, instead of using sizeof() on host CPU
 746         types.
 747         (INVALID_FLOAT): Cast first argument.
 748         (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
 749         list_P032, list_M032): Now const.
 750         (optlist, list_search): Made appropriate arguments now point to
 751         const.
 752         (print_insn_arg): Changed static array of one-character-string
 753         pointers into a static const array of characters; fixed sprintf
 754         statement accordingly.
 755
 756 Sun Jul 10 00:27:47 1994  Ian Dall  (dall@hfrd.dsto.gov.au)
 757
 758         * opcodes/ns32k-dis.c: Semi-new file.  Had apparently been dropped
 759         from distribution. A ns32k-dis.c from a previous distribution has
 760         been brought up to date and supports the new interface.
 761
 762         * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
 763
 764         * configure.in: add bfd_ns32k_arch target support.
 765
 766         * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
 767         Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
 768
 769 Wed Jun 29 22:10:37 1994  Steve Chamberlain  (sac@cygnus.com)
 770
 771         * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
 772         disassembly right.
 773
 774 Tue Jun 28 13:22:06 1994  Stan Shebs  (shebs@andros.cygnus.com)
 775
 776         * h8300-dis.c, mips-dis.c: Don't use true and false.
 777
 778 Thu Jun 23 12:53:19 1994  David J. Mackenzie  (djm@rtl.cygnus.com)
 779
 780         * configure.in: Change --with-targets to --enable-targets.
 781
 782 Wed Jun 22 13:38:32 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 783
 784         * mips-dis.c (_print_insn_mips): Build a static hash table mapping
 785         opcodes to the first instruction with that opcode, to speed
 786         disassembly of large files.  From ralphc@pyramid.com (Ralph
 787         Campbell).
 788
 789 Tue Jun  7 12:49:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 790
 791         * Makefile.in (mostlyclean): Fix typo (was mostyclean).
 792
 793 Wed May 11 22:32:00 1994  DJ Delorie (dj@ctron.com)
 794
 795         * configure.bat: update to latest makefile.in
 796
 797 Sat May  7 17:13:21 1994  Steve Chamberlain  (sac@cygnus.com)
 798
 799         * a29k-dis.c (print_insn): Print 'x' type operand in hex.
 800         * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
 801         * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
 802         slot insn is in a delay slot.
 803         * z8k-opc.h: (resflg): Fix patterns.
 804         * h8500-opc.h Fix CR insn patterns.
 805
 806 Fri May  6 14:34:46 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 807
 808         * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
 809         "cmpl" before POWER versions, so that gas -many uses them.
 810
 811 Thu Apr 28 18:32:36 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
 812
 813         * disassemble.c: New file.
 814         * Makefile.in (OFILES): Add disassemble.o.
 815         (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
 816         * configure.in: Define ARCHDEFS in Makefile.  Code taken from
 817         binutils/configure.in.
 818
 819         * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
 820         opcode being examined.
 821
 822 Thu Apr 21 17:08:40 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 823
 824         * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
 825         (insert_ral, insert_ram, insert_ras): New functions.
 826         (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
 827         RAS for store with update.
 828
 829 Sat Apr 16 23:41:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 830
 831         * ppc-opc.c (powerpc_opcodes): Correct fcir.  From David Edelsohn
 832         (edelsohn@npac.syr.edu).
 833
 834 Wed Apr  6 17:11:45 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 835
 836         * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
 837         immediate argument.
 838
 839 Mon Apr  4 16:30:46 1994  Doug Evans  (dje@canuck.cygnus.com)
 840
 841         * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
 842
 843 Mon Apr  4 13:22:00 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 844
 845         * ppc-opc.c (powerpc_operands): The signedp field has been
 846         removed, so don't initialize it.  Set the PPC_OPERAND_SIGNED flag
 847         instead.  Add new operand SISIGNOPT.
 848         (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
 849         Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
 850         * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
 851         than signedp field.
 852
 853 Wed Mar 30 00:31:49 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 854
 855         * i386-dis.c (struct private):  Renamed to dis_private. `private'
 856         is a reserved word for dynix cc.
 857
 858 Mon Mar 28 13:00:15 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 859
 860         * configure.in: Change error message to refer to bfd/config.bfd
 861         rather than bfd/configure.in.
 862
 863 Mon Mar 28 12:28:30 1994  David Edelsohn  (edelsohn@npac.syr.edu)
 864
 865         * ppc-opc.c: Define POWER2 as short alias flag.
 866         (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
 867         fsqrt.
 868
 869 Wed Mar 23 12:23:05 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 870
 871         * i960-dis.c (print_insn_i960): Don't read a second word for
 872         opcodes 0, 1, 2 and 3.
 873
 874 Wed Mar 16 15:37:58 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 875
 876         * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
 877
 878 Mon Mar 14 14:53:50 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 879
 880         * m68881-ext.c: Removed; no longer used.
 881         * Makefile.in: Changed accordingly.
 882
 883         * m68k-dis.c (ext_format_68881): Don't declare.
 884         (print_insn_m68k): If an instruction uses place 'i', it uses at
 885         least four fixed bytes.
 886         (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'.  For
 887         extended float, convert to double using floatformat_to_double, not
 888         ieee_extended_to_double, and fetch the data before converting it.
 889
 890 Tue Mar  8 18:12:25 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 891
 892         * mips-opc.c: It's sqrt.s, not sqrt.w.  From
 893         davidj@ICSI.Berkeley.EDU (David Johnson).
 894
 895 Tue Feb  8 16:55:27 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 896
 897         * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
 898         PowerPC uses bdnz[l][a].
 899
 900 Tue Feb  8 00:32:28 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 901
 902         * dis-buf.c, i386-dis.c:  Include sysdep.h.
 903
 904 Mon Feb  7 19:22:23 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 905
 906         * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
 907
 908         * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
 909         by Motorola PowerPC 601 with PPC_OPCODE_601.
 910         * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
 911         Disassemble Motorola PowerPC 601 instructions as well as normal
 912         PowerPC instructions.
 913
 914 Sun Feb  6 07:45:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
 915
 916         * i960-dis.c (reg, mem): Just use a static array instead of
 917         calling xmalloc.
 918
 919 Sat Feb  5 00:04:02 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
 920
 921         * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
 922         condition name index if this is for a negated condition.
 923
 924         * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
 925         Floating point format for 'H' operand is backwards from normal
 926         case (0 == double, 1 == single).  For '4', '6', '7', '9', and '8'
 927         operands (fmpyadd and fmpysub), handle bizarre register
 928         translation correctly for single precision format.
 929
 930         * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
 931         or 'I' operands if the next format specifier is 'M' (fcmp
 932         condition completer).
 933
 934 Feb  4 23:38:03 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 935
 936         * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
 937         single number giving a bitmask for the MB and ME fields of an M
 938         form instruction.  Change NB to accept 32, and turn it into 0;
 939         also turn 0 into 32 when disassembling.  Seperated SH from NB.
 940         (insert_mbe, extract_mbe): New functions.
 941         (insert_nb, extract_nb): New functions.
 942         (SC_MASK): Mask out SA and LK bits.
 943         (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
 944         RA, SI.  Change "liu" and "cau" to use UI rather than SI.  Mark
 945         "bctr" and "bctrl" as accepted by POWER.  Change "rlwimi",
 946         "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
 947         "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
 948         use MBE rather than MB.  Add "mfmq" and "mtmq" POWER instructions.
 949         (powerpc_macros): Define table of macro definitions.
 950         (powerpc_num_macros): Define.
 951
 952         * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
 953         if PPC_OPERAND_NEXT is set.
 954
 955 Sat Jan 22 23:10:07 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 956
 957         * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
 958         char.  Retrieve contents using bfd_getl32 instead of shifting.
 959
 960 Fri Jan 21 19:01:39 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 961
 962         * ppc-opc.c: New file.  Opcode table for PowerPC, including
 963         opcodes for POWER (RS/6000).
 964         * ppc-dis.c: New file.  PowerPC and Power (RS/6000) disassembler.
 965         * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
 966         (CFILES): Add ppc-dis.c.
 967         (ppc-dis.o, ppc-opc.o): New targets.
 968         * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
 969
 970 Mon Jan 17 20:05:49 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
 971
 972         * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
 973         No space before 'u', 'f', or 'N'.
 974
 975 Sun Jan 16 14:20:16 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
 976
 977         * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
 978         farther than we should.
 979
 980         * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
 981
 982 Thu Jan  6 12:38:05 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
 983
 984         * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
 985
 986 Wed Jan  5 11:56:21 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
 987
 988         * i960-dis.c (print_insn_i960): Only read word2 if the instruction
 989         needs it, to prevent reading past the end of a section.
 990
 991 Wed Nov 17 17:20:12 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 992
 993         * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
 994         Removed t,A case for la; always use t,A(b) case.
 995
 996 Mon Nov  8 12:37:36 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 997
 998         From Ted Lemen <mellon@pepper.ncd.com>
 999         * mips-dis.c (print_insn_arg): Handle 'k'.
1000         * mips-opc.c: Make cache use k, not t.
1001
1002 Sun Nov  7 23:52:34 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1003
1004         * alpha-opc.h, alpha-dis.c (print_insn_alpha):  Add
1005         FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
1006         FLOAT_FORMAT_CODE to put out floating point register names.
1007
1008 Mon Nov  1 18:17:51 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1009
1010         * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
1011
1012 Thu Oct 28 17:42:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1013
1014         * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
1015
1016 Wed Oct 27 11:48:01 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1017
1018         * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
1019         larger than 32.  Moved dsxx32 variants first for disassembler.
1020
1021 Mon Oct 25 11:33:14 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
1022
1023         * z8kgen.c, z8k-opc.h: Add full lda information.
1024
1025 Tue Oct 19 12:39:25 1993  Jeffrey A Law  (law@cs.utah.edu)
1026
1027         * hppa-dis.c (print_insn_hppa): Do not emit a space after
1028         movb instructions.  Any necessary space will be emitted by
1029         the code to handle nullification completers.
1030
1031 Wed Oct 13 16:19:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1032
1033         * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
1034
1035 Fri Oct  8 02:34:21 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1036
1037         * alpha-opc.h:  Add ldl_l, fix typo for ldq_u.
1038         * alpha-dis.c (print_insn_alpha):  Add code for PAL_FORMAT_CODE.
1039
1040 Tue Oct  5 17:47:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1041
1042         * mips-opc.c: Correct lwu opcode value (book had it wrong).
1043
1044 Thu Sep 30 11:26:18 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
1045
1046         * z8k-dis.c (FETCH_DATA): get just the right amount of data.
1047         (unpack_instr): Cope with ARG_IMM4M1 type instructions.
1048
1049 Wed Sep 29 16:24:49 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
1050
1051         * m88k-dis.c (m88kdis): comment change.  Remove space after
1052           printing mnemonic.
1053           (printop): handle new arg types DEC and XREG for m88110.
1054
1055 Tue Sep 28 19:20:16 1993  Jeffrey A Law (law@snake.cs.utah.edu)
1056
1057         * hppa-dis.c (print_insn_hppa): Handle 'z' operand
1058         type for absolute branch addresses.  Delete special
1059         "ble" and "be" code in 'W' operand code.
1060
1061 Fri Sep 24 14:08:33 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1062
1063         * mips-opc.c: Set hazard information correctly for branch
1064         likely instructions.
1065
1066 Fri Sep 17 04:41:17 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1067
1068         * alpha-dis.c (print_insn_alpha), alpha-opc.h:  Fix bugs, use
1069         info->fprintf_func for printing and info->print_address_func for
1070         address output.
1071
1072 Wed Sep 15 12:12:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1073
1074         * mips-opc.c: Set INSN_TRAP for tXX instructions.
1075
1076 Thu Sep  9 10:11:27 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1077
1078         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
1079         Corrected second case of "b" for disassembler.
1080
1081 Tue Sep  7 14:25:15 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1082
1083         * mips-dis.c, m88k-dis.c: Don't include libbfd.h.  Changed calls
1084         to BFD swapping routines to correspond to BFD name changes.
1085
1086 Thu Sep  2 10:35:25 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1087
1088         * mips-opc.c: Change div machine instruction to be z,s,t rather
1089         than s,t.  Change div macro to be d,v,t rather than d,s,t.
1090         Likewise for divu, ddiv, ddivu.  Added z,s,t case for drem, dremu,
1091         rem and remu which generates only the corresponding div
1092         instruction.  This is for compatibility with the MIPS assembler,
1093         which only generates the simple machine instruction when an
1094         explicit destination of $0 is used.
1095         * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
1096
1097 Thu Aug 26 17:41:44 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1098
1099         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
1100         WR_31 hazard for bal, bgezal, bltzal.
1101
1102 Thu Aug 26 17:20:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1103
1104         * hppa-dis.c (print_insn_hppa): Use print function
1105         from within the disassemble_info, not fprintf_filtered.
1106
1107 Wed Aug 25 13:51:40 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1108
1109         * hppa-dis.c (print_insn_hppa): Handle '|' like '>'.  (From Jeff
1110         Law, law@cs.utah.edu.)
1111
1112 Mon Aug 23 12:44:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1113
1114         * mips-opc.c ("absu"): Removed.
1115         ("dabs"): Added.
1116
1117 Fri Aug 20 10:52:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1118
1119         * mips-opc.c: Added r6000 and r4000 instructions and macros.
1120         Changed hazard information to distinguish between memory load
1121         delays and coprocessor load delays.
1122
1123 Wed Aug 18 15:39:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1124
1125         * mips-opc.c: li.d uses "T,L", not "S,F".  Added li.s.
1126
1127 Tue Aug 17 09:44:42 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
1128
1129         * configure.in: Don't pass cpu to config.bfd.
1130
1131 Tue Aug 17 12:23:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1132
1133         * m88k-dis.c (m88kdis): Make class unsigned.
1134
1135 Thu Aug 12 15:08:18 1993  Ian Lance Taylor  (ian@cygnus.com)
1136
1137         * alpha-dis.c (print_insn_alpha): One branch format case was
1138         missing the instruction name.
1139
1140 Wed Aug 11 19:29:39 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
1141
1142         * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
1143         Add the arch-specific auxiliary files.
1144         (OFILES): Remove the arch-specific auxiliary files
1145         and use BFD_MACHINES instead of DIS_LIBS.
1146         * configure.in: Set BFD_MACHINES based on --with-targets option.
1147
1148 Thu Aug 12 12:04:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1149
1150         * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b).  Similarly
1151         for swc1.
1152
1153 Sun Aug  8 15:09:30 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1154
1155         * sparc-opc.c: Change CONST to const to deal with gcc
1156         -Dconst=__const -traditional.
1157
1158 Fri Aug  6 10:58:55 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1159
1160         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
1161         coprocessor instructions out of #if 0, and made them use new
1162         argument type "C".
1163
1164 Thu Aug  5 17:11:06 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1165
1166         * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
1167
1168 Fri Jul 30 18:48:15 1993  John Gilmore  (gnu@cygnus.com)
1169
1170         * sparc-opc.c:  Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
1171         instruction, for use by the disassembler.
1172
1173         * sparc-dis.c (SEX):  Add sign extension macro.  Replace many
1174         hand-coded sign extensions that depended on 32-bit host ints.
1175         FIXME, we still depend on big-endian host bitfield ordering.
1176         (sparc_print_insn):  Set the insn_info_valid field, and the
1177         other fields that describe the instruction being printed.
1178
1179 Tue Jul 27 17:04:58 1993  Jim Wilson  (wilson@sphagnum.cygnus.com)
1180
1181         * sparc-opc.c (call): Accept all 6 addressing modes valid for
1182         `jmp' instead of just one of them.
1183
1184 Wed Jul 21 11:43:32 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
1185
1186         * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
1187         (fput_fp_reg_r): Renamed from fput_reg_r.
1188         (fput_fp_reg): New function.
1189         (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
1190
1191         * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
1192
1193         * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
1194
1195 Mon Jul 19 13:52:21 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
1196
1197         * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
1198
1199         * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
1200         don't output a space.
1201
1202         * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
1203
1204 Sun Jul 18 16:30:02 1993  Jim Kingdon  (kingdon@rtl.cygnus.com)
1205
1206         * mips-opc.c: New file, containing opcode table from
1207         ../include/opcode/mips.h.
1208         * Makefile.in: Add it.
1209
1210 Thu Jul 15 12:37:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1211
1212         * m88k-dis.c: New file, moved in from gdb and changed to use the
1213         new dis-asm.h disassembler interface.
1214         * Makefile.in (DIS_LIBS): Added m88k-dis.o.
1215         (m88k-dis.o): New target.
1216
1217 Tue Jul 13 10:04:16 1993  Ian Lance Taylor  (ian@cygnus.com)
1218
1219         * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
1220         argument string const char * to correspond to opcode/mips.h.
1221
1222 Tue Jul  6 15:18:37 1993  Ian Lance Taylor  (ian@cygnus.com)
1223
1224         * mips-dis.c: Updated to account for name changes in new version
1225         of opcode/mips.h.
1226         * Makefile.in: Added header file dependencies.
1227
1228 Sat Jul  3 23:47:56 1993  Doug Evans  (dje@canuck.cygnus.com)
1229
1230         * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
1231
1232 Thu Jul  1 12:23:38 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1233
1234         * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
1235         extend, rather than shifts.
1236
1237 Sun Jun 20 20:56:56 1993  Ken Raeburn  (raeburn@poseidon.cygnus.com)
1238
1239         * Makefile.in: Undo 15 June change.
1240
1241 Fri Jun 18 14:15:15 1993  Per Bothner  (bothner@deneb.cygnus.com)
1242
1243         * m68k-dis.c (print_insn_arg):  Change return value to byte count
1244         or error code.
1245         * m68k-dis.c:  Re-write to detect invalid operands before
1246         printing anything, so we can handle this the same way we
1247         handle invalid opcodes.
1248
1249 Thu Jun 17 15:01:36 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
1250
1251         * sh-dis.c, sh-opc.h: Understand some more opcodes.
1252
1253 Wed Jun 16 13:48:05 1993  Ian Lance Taylor  (ian@cygnus.com)
1254
1255         * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
1256         header files.
1257
1258 Tue Jun 15 21:45:26 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1259
1260         * sparc-dis.c: Don't declare qsort, since sysdep.h might.
1261
1262         * configure.in: Do make sysdep.h link.
1263         * Makefile.in: Search ../include.  Don't search ../bfd.
1264
1265 Tue Jun 15 13:36:10 1993  Stu Grossman  (grossman@cygnus.com)
1266
1267         Changes from Jeff Law, law@cs.utah.edu:
1268         * hppa-dis.c: Fix typo.  'a' and 'd' were reversed.
1269         Do not print a space before the completers specified by
1270         'a' and 'd'.
1271
1272 Fri Jun 11 18:40:21 1993  Ken Raeburn  (raeburn@cygnus.com)
1273
1274         * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
1275         defined, since gdb has been fixed.
1276
1277         Changes from Jeff Law, law@cs.utah.edu:
1278         * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
1279         fput_reg_r, fput_creg, fput_const, and fputs_filtered should
1280         be a *disassemble_info, not a *FILE.
1281         * hppa-dis.c: Support 'd', '!', and 'a'.
1282         * hppa-dis.c: Support 's' to extract a 2 bit space register.
1283         * hppa-dis.c: Delete cases which are no longer needed.
1284
1285 Fri Jun 11 07:53:48 1993  Jim Kingdon  (kingdon@cygnus.com)
1286
1287         * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
1288
1289 Tue Jun  8 12:25:01 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
1290
1291         * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
1292         H8/300-H opcodes.
1293
1294 Mon Jun  7 12:58:49 1993  Per Bothner  (bothner@rtl.cygnus.com)
1295
1296         * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
1297         * configure.in:  No longer need to configure to get sysdep.h.
1298
1299 Thu Jun  3 15:56:49 1993  Stu Grossman  (grossman@cygnus.com)
1300
1301         * Patches from Jeffrey Law <law@cs.utah.edu>.
1302         * hppa-dis.c: Support 'I', 'J', and 'K' in output
1303         templates for 1.1 FP computational instructions.
1304
1305 Tue May 25 13:05:48 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1306
1307         * h8500-dis.c (print_insn_h8500): Address argument is type
1308         bfd_vma.
1309         * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
1310         Ditto.
1311
1312         * h8500-opc.h (addr_class_type): No comma at end of enumerator.
1313         * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
1314
1315         * sparc-dis.c (compare_opcodes): Move static declaration to
1316         top-level.
1317
1318 Fri May 21 14:17:37 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1319
1320         * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
1321         instruction, remove unimp hack from 'l' argument.
1322
1323 Wed May 19 15:35:54 1993  Stu Grossman  (grossman@cygnus.com)
1324
1325         * z8k-dis.c (fetch_data):  Use unsigned char to make ancient gcc's
1326         happy.
1327
1328 Fri May 14 15:22:46 1993  Ian Lance Taylor  (ian@cygnus.com)
1329
1330         * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
1331         * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
1332         instructions.
1333
1334 Fri May 14 00:09:14 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1335
1336         * hppa-dis.c: Include dis-asm.h before sysdep.h.  Changed some
1337         arrays of string pointers to 2-d arrays of chars, to save
1338         space.
1339
1340 Thu May  6 20:51:17 1993  Fred Fish  (fnf@cygnus.com)
1341
1342         * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
1343         Cast second arg to read_memory_func to "bfd_byte *", as necessary.
1344
1345 Tue May  4 20:31:10 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1346
1347         * hppa-dis.c: New file from Utah, adapted to new disassembler
1348         calling interface.
1349         * Makefile.in: Include it.
1350
1351 Mon Apr 26 18:17:42 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1352
1353         * sh-dis.c, sh-opc.h: New files.
1354
1355 Fri Apr 23 18:51:22 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1356
1357         * alpha-dis.c, alpha-opc.h: New files.
1358
1359 Tue Apr  6 12:54:08 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1360
1361         * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
1362         value.
1363
1364 Mon Apr  5 17:37:37 1993  John Gilmore  (gnu@cygnus.com)
1365
1366         * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
1367
1368 Fri Apr  2 07:24:27 1993  Ian Lance Taylor  (ian@cygnus.com)
1369
1370         * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
1371         const.
1372
1373 Thu Apr  1 11:20:43 1993  Jim Kingdon  (kingdon@cygnus.com)
1374
1375         * sparc-dis.c: Use fprintf_func a few places where I forgot,
1376         and double percent signs a few places.
1377
1378         * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
1379
1380         * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
1381         Use info->print_address_func not print_address.
1382
1383         * dis-buf.c (generic_print_address): New function.
1384
1385 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1386
1387         * Makefile.in: Add sparc-dis.c.
1388         sparc-dis.c: New file, merges binutils and gdb versions as follows:
1389         From GDB:
1390             Add `add' instruction to the set that get checked
1391             for a preceding `sethi' in order to print an absolute address.
1392             * (print_insn):  Disassembly prefers real instructions.
1393             (is_delayed_branch):  Speed up.
1394             * sparc-opcode.h: Add ALIAS bit to aliases.  Fix up opcode tables.
1395             Still missing some float ops, and needs testing.
1396             * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
1397             F_ALIAS.  Use printf, not fprintf, when not passing a file
1398             pointer...
1399             (compare_opcodes): Check that identical instructions have
1400             identical opcodes, complain otherwise.
1401         From binutils:
1402             * New 'm' arg.
1403             * Include reg_names.
1404         From neither:
1405             Use dis-asm.h/read_memory_func interface.
1406
1407 Wed Mar 31 20:49:06 1993  K. Richard Pixley  (rich@rtl.cygnus.com)
1408
1409         * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
1410           deliberately return non-zero to setjmp from longjmp.  Otherwise
1411           this code fails to compile.
1412
1413 Wed Mar 31 17:04:31 1993  Stu Grossman  (grossman@cygnus.com)
1414
1415         * m68k-dis.c:  Fix prototype for fetch_arg().
1416
1417 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1418
1419         * dis-buf.c: New file, for new read_memory_func interface.
1420         Makefile.in (OFILES): Include it.
1421         m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
1422         Use new read_memory_func interface.
1423
1424 Mon Mar 29 14:02:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1425
1426         * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
1427         * h8500-opc.h: Fix couple of opcodes.
1428
1429 Wed Mar 24 02:03:36 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
1430
1431         * Makefile.in: add dvi & installcheck targets
1432
1433 Mon Mar 22 18:55:04 1993  John Gilmore  (gnu@cygnus.com)
1434
1435         * Makefile.in:  Update for h8500-dis.c.
1436
1437 Fri Mar 19 14:27:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1438
1439         * h8500-dis.c, h8500-opc.h: New files
1440
1441 Thu Mar 18 14:12:37 1993  Per Bothner  (bothner@rtl.cygnus.com)
1442
1443         * mips-dis.c, z8k-dis.c:  Converted to use interface defined in
1444         ../include/dis-asm.h.
1445         * m68k-dis.c:  New file (merge of ../binutils/m68k-pinsn.c
1446         and ../gdb/m68k-pinsn.c).
1447         * i386-dis.c:  New file (merge of ../binutils/i386-pinsn.c
1448         and ../gdb/i386-pinsn.c).
1449         * m68881-ext.c:  New file.  Moved definition of
1450         ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
1451         * Makefile.in:  Adjust for new files.
1452         * i386-dis.c:  Patches from John Hassey (hassey@dg-rtp.dg.com).
1453         * m68k-dis.c:  Recognize '9' placement code, so (say) pflush
1454         can be dis-assembled.
1455
1456 Wed Feb 17 09:19:47 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1457
1458         * mips-dis.c (print_insn_arg): Now returns void.
1459
1460 Mon Jan 11 16:09:16 1993  Fred Fish  (fnf@cygnus.com)
1461
1462         * mips-dis.c (ansidecl.h):  Include for benefit of sysdep.h
1463         files that use the macros.
1464
1465 Thu Jan  7 13:15:17 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1466
1467         * mips-dis.c: New file, from gdb/mips-pinsn.c.
1468         * Makefile.in (DIS_LIBS): Added mips-dis.o.
1469         (CFILES): Added mips-dis.c.
1470
1471 Thu Jan  7 07:36:33 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1472
1473         * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
1474         * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
1475
1476 Tue Dec 22 15:42:44 1992  Per Bothner  (bothner@rtl.cygnus.com)
1477
1478         * Makefile.in:  Improve *clean rules.
1479         * configure.in:  Allow a default host.
1480
1481 Tue Nov 17 19:53:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1482
1483         * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
1484         files include other sysdep files
1485
1486 Thu Nov 12 16:10:37 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1487
1488         * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
1489
1490 Fri Oct  9 04:56:05 1992  John Gilmore  (gnu@cygnus.com)
1491
1492         * configure.in:  For host support, use ../bfd/configure.host
1493         so it stays in sync with the ../bfd/hosts database.
1494
1495 Thu Oct  1 23:38:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1496
1497         * configure.in: use cpu-vendor-os triple instead of nested cases
1498
1499 Wed Sep 30 16:09:20 1992  Michael Werner  (mtw@cygnus.com)
1500
1501         * z8k-dis.c (unparse_instr): fix bug where opcode returned was
1502         *always* the wrong one.
1503
1504 Wed Sep 30 07:42:17 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1505
1506         * z8kgen.c: added copyright info
1507
1508 Tue Sep 29 12:20:21 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1509
1510         * z8k-dis.c (unparse_instr): prettier tabs
1511         * z8kgen.c -> z8k-opc.h: bug fixes in tables
1512
1513 Fri Sep 25 12:50:32 1992  Stu Grossman  (grossman at cygnus.com)
1514
1515         * configure.in:  Add ncr* configuration.
1516         * z8k-dis.c (struct instr_data_s):  Make instr_asmsrc char to make
1517         picayune ANSI compilers happy.
1518
1519 Sep 20 08:50:55 1992  Fred Fish  (fnf@cygnus.com)
1520
1521         * configure.in (i386):  Make i386 and i486 synonymous for now.
1522         * configure.in (i[34]86-*-sysv4):  Add my_host definition.
1523
1524 Fri Sep 18 17:01:23 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1525
1526         * Makefile.in (install): Fix typo.
1527
1528 Fri Sep 18 02:04:24 1992  John Gilmore  (gnu@cygnus.com)
1529
1530         * Makefile.in (make):  Remove obsolete crud.
1531         (sparc-opc.o):  Avoid Sun Make VPATH bug.
1532
1533 Tue Sep  8 17:29:27 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
1534
1535         * Makefile.in: since there are no SUBDIRS, remove rule and
1536         references of subdir_do.
1537
1538 Tue Sep  8 17:02:58 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1539
1540         * Makefile.in (install): Get the library name right here too.
1541         Don't install bfd.h, since it's unrelated to this library.  No
1542         subdirs to recurse into, either.
1543         (CFILES): The source file has a .c suffix, not .o.
1544
1545         * sparc-opc.c: New file, moved from BFD.
1546         * Makefile.in (OFILES): Build it.
1547
1548 Thu Sep  3 16:59:20 1992  Michael Werner  (mtw@cygnus.com)
1549
1550         * z8k-dis.c: fixed forward refferences of some declarations.
1551
1552 Mon Aug 31 16:09:45 1992  Michael Werner  (mtw@cygnus.com)
1553
1554         * Makefile.in: get the name of the library right
1555
1556 Mon Aug 31 13:47:35 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1557
1558         * z8k-dis.c: knows how to disassemble z8k stuff
1559         * z8k-opc.h: new file full of z8000 opcodes
1560
1561 \f
1562 Local Variables:
1563 version-control: never
1564 End: