opcodes/ChangeLog

   1 Wed Sep  6 21:21:33 1995  Ian Lance Taylor  <ian@cygnus.com>
   2
   3         * Makefile.in (ALL_CFLAGS): Define.
   4         (.c.o, disassemble.o): Use $(ALL_CFLAGS).
   5         (MOSTLYCLEAN): Add config.log.
   6         (distclean): Don't remove config.log.
   7         * configure.in: Substitute HDEFINES.
   8         * configure: Rebuild.
   9
  10 start-sanitize-sh3e
  11 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
  12
  13         * sh-opc.h (sh_arg_type): Add F_FR0.
  14         (sh_table, case fmac): Add F_FR0 as first argument.
  15
  16 end-sanitize-sh3e
  17 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
  18
  19         * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
  20
  21 Tue Sep  5 18:28:10 1995  Doug Evans  <dje@canuck.cygnus.com>
  22
  23         * sparc-dis.c: Remove all references to NO_V9.
  24
  25 Tue Sep  5 20:03:26 1995  Ian Lance Taylor  <ian@cygnus.com>
  26
  27         * aclocal.m4: Just include ../bfd/aclocal.m4.
  28         * configure: Rebuild.
  29
  30 Tue Sep  5 16:09:59 1995  Doug Evans  <dje@canuck.cygnus.com>
  31
  32         * sparc-dis.c (X_DISP19): Define.
  33         (print_insn, case 'G'): Use it.
  34         (print_insn, case 'L'): Sign extend displacement.
  35
  36 Mon Sep  4 14:28:46 1995  Ian Lance Taylor  <ian@cygnus.com>
  37
  38         * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
  39         Subsitute CFLAGS and AR.  Call AC_PROG_INSTALL.  Don't substitute
  40         host_makefile_frag or frags.
  41         * aclocal.m4: New file.
  42         * configure: Rebuild.
  43         * Makefile.in (INSTALL): Set to @INSTALL@.
  44         (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
  45         (INSTALL_DATA): Set to @INSTALL_DATA@.
  46         (AR): Set to @AR@.
  47         (AR_FLAGS): Set to rc rather than qc.
  48         (CC): Define as @CC@.
  49         (CFLAGS): Set to @CFLAGS@.
  50         (@host_makefile_frag@): Remove.
  51         (config.status): Remove dependency upon @frags@.
  52
  53         * configure.in: ../bfd/config.bfd now just sets shell variables.
  54         Use them rather than looking through target Makefile fragments.
  55         * configure: Rebuild.
  56
  57 start-sanitize-sh3e
  58 Thu Aug 31 12:35:32 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
  59
  60         * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
  61
  62 end-sanitize-sh3e
  63 Wed Aug 30 13:52:28 1995  Doug Evans  <dje@canuck.cygnus.com>
  64
  65         * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
  66         Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
  67         sparc64 insns.
  68
  69         * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
  70         (lookup_{name,value}): New functions.
  71         (prefetch_table): New static local.
  72         (sparc_{encode,decode}_prefetch): New functions.
  73         * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
  74
  75 start-sanitize-sh3e
  76 Wed Aug 30 11:11:58 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
  77
  78         * sh-opc.h: Add blank lines to improve readabililty of sh3e
  79         instructions.
  80
  81 end-sanitize-sh3e
  82 Wed Aug 30 11:09:38 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
  83
  84         * sh-dis.c: Correct comment on first line of file.
  85
  86 Tue Aug 29 15:37:18 1995  Doug Evans  <dje@canuck.cygnus.com>
  87
  88         * disassemble.c (disassembler): Handle bfd_mach_sparc64.
  89
  90         * sparc-opc.c (asi, membar): New static locals.
  91         (sparc_{encode,decode}_{asi,membar}): New functions.
  92         (sparc_opcodes, membar insn): Fix.
  93         * sparc-dis.c (print_insn): Call sparc_decode_asi.
  94         Support decoding of membar masks.
  95         (X_MEMBAR): Define.
  96
  97 Sat Aug 26 21:22:48 1995  Ian Lance Taylor  <ian@cygnus.com>
  98
  99         * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
 100
 101 Mon Aug 21 17:33:36 1995  Ian Lance Taylor  <ian@cygnus.com>
 102
 103         * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
 104         and likewise for the other branches.  Add bhs as an alias for bcc,
 105         and likewise for the size variants.  Add dbhs as an alias for
 106         dbcc.
 107
 108 start-sanitize-sh3e
 109 Fri Aug 11 13:40:24 1995  Jeff Law  (law@snake.cs.utah.edu)
 110
 111         * sh-opc.h (FP sts instructions): Update to match reality.
 112
 113 end-sanitize-sh3e
 114 Mon Aug  7 16:12:58 1995  Ian Lance Taylor  <ian@cygnus.com>
 115
 116         * m68k-dis.c: (fpcr_names): Add % before all register names.
 117         (reg_names): Likewise.
 118         (print_insn_arg): Don't explicitly print % before register names.
 119         Add % before register names in static array names.  In case 'r',
 120         print data registers as `@(Dn)', not `Dn@'.  When printing a
 121         memory address, don't print @# before it.
 122         (print_indexed): Change base_disp and outer_disp from int to
 123         bfd_vma.  Print using MIT syntax, not mutant invalid Motorola
 124         syntax.  Sign extend 8 byte displacement correctly.
 125         (print_base): Print using MIT syntax.  Print zpc when appropriate.
 126         Change parameter disp from int to bfd_vma.
 127
 128         * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
 129         for jsr.
 130
 131 start-sanitize-sh3e
 132 Mon Aug  7 02:21:40 1995  Jeff Law  (law@snake.cs.utah.edu)
 133
 134         * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
 135         F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
 136         * sh-opc.h (sh_arg_type): Add new operand types.
 137         (sh_table): Add new opcodes from SH3E Floating Point ISA.
 138
 139 end-sanitize-sh3e
 140 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
 141
 142         * Makefile.in (distclean): Remove generated file config.h.
 143
 144 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
 145
 146         * Makefile.in (distclean): Remove generated file config.h.
 147
 148 Wed Aug  2 18:33:40 1995  Ian Lance Taylor  <ian@cygnus.com>
 149
 150         * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
 151         Clean up tables.
 152         * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
 153         (opcode): Remove.
 154         (print_insn_m68k): Change d to be const.  Use m68k_numopcodes
 155         rather than numopcodes.  Use m68k_opcodes rather than removed
 156         opcode function.  Don't check F_ALIAS.
 157         (print_insn_arg): Change first parameter to be const char *.
 158         * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
 159         (m68k-opc.o): New target.
 160         * configure.in: Build m68k-opc.o for bfd_m68k_arch.
 161         * configure: Rebuild.
 162
 163 Wed Aug  2 08:23:38 1995  Doug Evans  <dje@canuck.cygnus.com>
 164
 165         * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
 166         (opcode_bits, opcode_hash_table): New variables.
 167         (opcodes_initialized): Renamed from opcodes_sorted.
 168         (build_hash_table): New function.
 169         (is_delayed_branch): Use hash table.
 170         (print_insn): Renamed from print_insn_sparc, made static.
 171         Build and use hash table.  If !sparc64, ignore sparc64 insns,
 172         and vice-versa if sparc64.
 173         (print_insn_sparc, print_insn_sparc64): New functions.
 174         (compare_opcodes): Move sparc64 opcodes to end.
 175         Print commutative insns with constant second.
 176         * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
 177
 178 Tue Aug  1 00:12:49 1995  Ian Lance Taylor  <ian@cygnus.com>
 179
 180         * sh-dis.c (print_insn_shx): Remove unused local dslot.  Use
 181         print_address_func for A_BDISP12 and A_BDISP8.  Correct test which
 182         avoids printing a delay slot in a delay slot.
 183         * sh-opc.h (sh_table): Fully bracket last entry.
 184
 185 Mon Jul 31 12:04:47 1995  Doug Evans  <dje@canuck.cygnus.com>
 186
 187         * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
 188
 189 Wed Jul 12 00:59:34 1995  Ken Raeburn  <raeburn@kr-pc.cygnus.com>
 190
 191         * configure.in: Get host_makefile_frag from ${srcdir}.
 192
 193         * configure.in: Autoconfiscated.  Check for string[s].h.  Create
 194         config.h from config.in.  Don't set up sysdep.h link.
 195         * sysdep.h: New file.
 196         * configure, config.in: New files, generated from configure.in.
 197         * Makefile.in: Updated to be processed autoconf-style.
 198         (distclean): Keep sysdep.h.  Remove config.log and config.cache.
 199         (Makefile): Depend on config.status.
 200         (config.status): New rule.
 201         * configure.bat: Update Makefile substitutions.
 202
 203 Tue Jul 11 14:23:37 1995  Jeff Spiegel  <jeffs@lsil.com>
 204
 205         * mips-opc.c (L1): Define.
 206         (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
 207         addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
 208         and wb.
 209
 210 Tue Jul 11 11:49:49 1995  Ian Lance Taylor  <ian@cygnus.com>
 211
 212         * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
 213         if ISA 3 and addu otherwise, replacing or, since some MIPS chips
 214         have multiple add units but only a single logical unit.
 215
 216         * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
 217         shifted by 18, without any insertion or extraction function.
 218         (insert_cr, extract_cr): Remove.
 219
 220 start-sanitize-arc
 221 Mon Jul  3 11:54:31 1995  Ian Lance Taylor  <ian@cygnus.com>
 222
 223         * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
 224
 225 end-sanitize-arc
 226 Wed Jun 21 20:05:39 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 227
 228         * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
 229         register names.
 230
 231 Thu Jun 15 17:23:31 1995  Stan Shebs  <shebs@andros.cygnus.com>
 232
 233         * mpw-config.in: Add sh and i386 configs, remove sparc config.
 234         * sh-opc.h: Add copyright.
 235
 236 Mon Jun  5 03:30:43 1995  Ken Raeburn  <raeburn@kr-laptop.cygnus.com>
 237
 238         * Makefile.in (crunch-m68k): Delete extra target accidentally
 239         checked in a while ago.
 240
 241 Wed May 24 16:22:13 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 242
 243         * sh-opc.h (sh_table): Add SH3 support.
 244
 245 Wed May 24 14:16:08 1995  Steve Chamberlain  <sac@slash.cygnus.com>
 246
 247         * sh-opc.h: Added bsrf and braf.
 248
 249 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
 250
 251         * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns.  Delete
 252         bogus [ls]fm{ea,fd} patterns.
 253
 254         * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
 255         * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
 256         initialize it from memory.  Make function static.
 257         (print_insn_{big,little}_arm): New functions.
 258         * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
 259         the correct endianness.
 260
 261 start-sanitize-arc
 262 Sat Apr 29 23:20:05 1995  Doug Evans  <dje@chestnut.cygnus.com>
 263
 264         * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
 265         (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
 266 end-sanitize-arc
 267
 268 Mon Apr 24 14:18:05 1995  Jason Molenda   (crash@phydeaux.cygnus.com>
 269
 270         * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
 271         enum list.
 272
 273 Wed Apr 19 14:07:03 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
 274
 275         * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
 276         17th, so that it builds again using GCC as the compiler.
 277
 278 Tue Apr 18 12:14:51 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 279
 280         * mips-dis.c (print_insn_little_mips): Cast return value from
 281         bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
 282         expects an unsigned long, and that might be fewer words of
 283         argument storage (e.g., if bfd_vma is long long on a 32-bit
 284         machine).
 285         (print_insn_big_mips): Likewise with bfd_getb32 value.
 286         (_print_insn_mips): Now static.
 287
 288 Mon Apr 17 12:23:28 1995  Kung Hsu  <kung@rtl.cygnus.com>
 289
 290         * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
 291         gcc memory hog problem with initializer is fixed.
 292
 293 start-sanitize-arc
 294 Wed Apr 12 09:04:12 1995  Doug Evans  <dje@canuck.cygnus.com>
 295
 296         * arc-opc.c (NULL): Define.
 297         (arc_operands, insn fields u,s): Delete.
 298         (arc_operands, insn fields a,b,c): Mark as signed.
 299         (arc_opcodes): No longer const, links computed at run-time.
 300         (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
 301         suffixes that affect the insn code.
 302         (arc_opcodes): Resort table to macros are first.
 303         (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
 304         (arc_opcodes, st [b] entry): Likewise.
 305         (arc_opcodes, st [b,d] entry): Fix mask, value.
 306         (arc_reg_names): Add entries for r29, r30, r31, r60.
 307         (opcode_map, icode_map): New static globals.
 308         (arc_opcode_init_tables): Initialize them.
 309         (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
 310         (insert_shimmoffset): Signal error if register present.
 311         Validate constant.
 312         * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
 313 end-sanitize-arc
 314
 315 Mon Apr 10 15:55:01 1995  Stan Shebs  <shebs@andros.cygnus.com>
 316
 317         Merge in support for Mac MPW as a host.
 318         (Old change descriptions retained for informational value.)
 319
 320         * mpw-config.in (archname): Compute from the config.
 321         (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
 322
 323         * mpw-config.in (target_arch): Compute from canonical target.
 324         (m68k, mips, powerpc, sparc): Add architectures.
 325         * mpw-make.in (disassemble.c.o): Add.
 326         (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
 327
 328         * mpw-config.in (BFD_MACHINES): Set to a default value.
 329         * mpw-make.in (BFD_MACHINES): Remove wired-in value.
 330
 331         * mpw-make.in (CSEARCH): Add extra-include to search path.
 332
 333         * mpw-config.in (varargs.h): Don't create.
 334         (sysdep.h): Create using forward-include.
 335         * mpw-make.in (CSEARCH): Add include/mpw to search path.
 336
 337         * mpw-config.in: New file, MPW version of configure.in.
 338         * mpw-make.in: New file, MPW version of Makefile.in.
 339
 340 start-sanitize-arc
 341 Thu Apr  6 20:36:08 1995  Doug Evans  <dje@chestnut.cygnus.com>
 342
 343         * arc-dis.c (print_insn): New parameter `big_p'.  Callers updated.
 344         Call arc_get_opcode_mach to map bfd mach number to opcode value.
 345         (print_insn_*): Pass bfd mach number, not opcode version.
 346         * arc-opc.c (arc_get_opcode_mach): New function.
 347 end-sanitize-arc
 348
 349 Fri Mar 31 14:23:38 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 350
 351         * alpha-dis.c (print_insn_alpha): Put empty statement after
 352         default label.
 353
 354 Tue Mar 21 10:51:40 1995  Jeff Law  (law@snake.cs.utah.edu)
 355
 356         * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
 357         (low_sign_extend): Likewise.
 358         (get_field): Delete unused function.
 359         (set_field, deposit_14, deposit_21): Likewise.
 360
 361 Fri Mar 17 15:55:53 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
 362
 363         * i386-dis.c: Support for more pentium opcodes.  From Guy Harris
 364           (guy@netapp.com).
 365
 366 Tue Mar 14 00:52:57 1995  Ken Raeburn  (raeburn@kr-pc.cygnus.com)
 367
 368         Sat Feb 11 17:22:41 1995  Klaus Kaempf  (kkaempf@didymus.rmi.de)
 369
 370         * alpha-opc.h (OSF_ASMCODE): define
 371         print pal-code names as defined in App C of the
 372         Alpha Architecture Reference Manual
 373
 374         * alpha-dis.c: cleaned up output
 375         print stylized code forms as defined in App A.4.3 of the
 376         Alpha Architecture Reference Manual
 377
 378 Wed Mar  8 15:21:14 1995  Ian Lance Taylor  <ian@cygnus.com>
 379
 380         * mips-opc.c: Add new mips4 instructions.  Don't set INSN_RFE for
 381         `rfe'.
 382         * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
 383         'N', and 'M'.
 384
 385 Wed Mar  8 02:54:05 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 386
 387         * m68k-dis.c (opcode): New function.  Returns address of opcode
 388         table entry given index, even if the opcode table was split to
 389         work around gcc bugs.
 390         (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
 391         directly.
 392         (BREAK_UP_BIG_DECL): Make secondary array static and const.
 393         (reg_names): Now const.
 394         (print_insn_arg): Arrays cacheFieldName and names now const.
 395         (print_indexed): Array scales now const.
 396
 397 start-sanitize-arc
 398 Tue Mar  7 21:14:14 1995  Doug Evans  <dje@chestnut.cygnus.com>
 399
 400         * arc-dis.c (print_insn_arc_base): Split into big and little fns.
 401         (print_insn_arc_{host,graphics,audio}): Likewise.
 402         (print_insn): Add prototype.
 403         (arc_get_disassembler): New arg `big_p'.  Return little or big
 404         print fn accordingly.
 405         * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
 406         (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
 407         (arc_opval_supported): Likewise.
 408         * disassemble.c (disassembler): Pass big endian flag to
 409         arc_get_disassembler.
 410 end-sanitize-arc
 411
 412 Tue Mar  7 16:41:21 1995  Ian Lance Taylor  <ian@cygnus.com>
 413
 414         * ppc-opc.c: Sort recently added instructions by minor opcode
 415         number within major opcode number.
 416
 417 Mon Mar  6 10:04:36 1995  Jeff Law  (law@snake.cs.utah.edu)
 418
 419         * hppa-dis.c: Include libhppa.h.
 420
 421 Fri Feb 24 19:15:36 1995  Ian Lance Taylor  <ian@cygnus.com>
 422
 423         * mips-opc.c: Change dli to use M_DLI, and add dla.
 424
 425 Mon Feb 20 23:54:38 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 426
 427         * Makefile.in (ALL_MACHINES):  Add w65-dis.o.
 428
 429 start-sanitize-arc
 430 Fri Feb 17 12:42:25 1995  Doug Evans  <dje@chestnut.cygnus.com>
 431
 432         * arc-dis.c (arc_get_disassembler): Change argument to int,
 433         one of bfd_mach_arc_xxx.  All callers updated.
 434 end-sanitize-arc
 435
 436 Thu Feb 16 17:34:41 1995  Ian Lance Taylor  <ian@cygnus.com>
 437
 438         * mips-opc.c: Add r4650 mul instruction.
 439
 440 Wed Feb 15 15:45:20 1995  Ian Lance Taylor  <ian@cygnus.com>
 441
 442         * mips-opc.c: Add uld and usd macros for unaligned double load and
 443         store.
 444
 445 Tue Feb 14 13:17:37 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
 446
 447         * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
 448         mfdcr, mtdcr, icbt, iccci.
 449
 450 start-sanitize-arc
 451 Mon Feb 13 11:09:17 1995  Doug Evans  <dje@canuck.cygnus.com>
 452
 453         * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
 454         * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
 455         ('L' operand): Mark as ARC_OPERAND_ADDRESS.
 456         (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
 457         (arc_opcodes, ld/st insns): Fix address writeback operand letter.
 458         (insert_absaddr): New function.
 459
 460 Thu Feb  9 19:19:23 1995  Doug Evans  <dje@canuck.cygnus.com>
 461
 462         * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
 463         New argument `cpu', pass it to arc_opcode_init_tables.
 464         Document byte order dependencies.  Ignore unsupported insns.
 465         (arc_get_disassembler): New function.
 466         (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
 467         print_insn_arc_audio): New functions.
 468         * arc-opc.c (MULTSHIFT operand): Delete.
 469         (UNSIGNED, SATURATION): New operands.
 470         (mac, mul, mul64, mulu64): New insns.
 471         (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
 472         (padc, padd, pmov, pand, psbc, psub, swap): New insns.
 473         (host,graphics,audio extended and auxiliary regs): Define.
 474         (ss, sc, mh, ml): New suffixes.
 475         (arc_opcode_supported, arc_opval_supported): New functions.
 476         (insert_multshift, extract_multshift): Deleted.
 477         * disassemble.c (disassembler, case bfd_arch_arc): Call
 478         arc_get_disassembler to get disassembler routine.
 479 end-sanitize-arc
 480
 481 Thu Feb  9 12:28:13 1995  Stan Shebs  <shebs@andros.cygnus.com>
 482
 483         * i960-dis.c (struct tabent, struct sparse_tabent): Change the
 484         signed char fields to shorts, more portable.
 485
 486 Wed Feb  8 17:29:29 1995  Stan Shebs  <shebs@andros.cygnus.com>
 487
 488         * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
 489         char fields as signed chars, since they may have negative values.
 490
 491 Mon Feb  6 10:52:06 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
 492
 493         * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
 494           (mycroft@netbsd.org).
 495
 496 Mon Jan 30 12:38:00 1995  Ian Lance Taylor  <ian@cygnus.com>
 497
 498         From "Logg, Ed" <elogg@ea.com>:
 499         * ppc-opc.c (extract_bdm): Correct parenthezisation.
 500         * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
 501         value.
 502
 503 Thu Jan 26 18:32:08 1995  Ian Lance Taylor  <ian@cygnus.com>
 504
 505         * ppc-opc.c: Changes based on patch from David Edelsohn
 506         <edelsohn@mhpcc.edu>.
 507         (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
 508         SPR.
 509         (FXM_MASK): Define.
 510         (insert_tbr): New static function.
 511         (extract_tbr): New static function.
 512         (XFXFXM_MASK, XFXM): Define.
 513         (XSPRBAT_MASK, XSPRG_MASK): Define.
 514         (powerpc_opcodes): Add instructions to access special registers by
 515         name.  Add mtcr and mftbu.
 516
 517 Tue Jan 17 10:56:43 1995  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 518
 519         * mips-opc.c (P3): Define.
 520         (mips_opcodes): Add mad and madu.
 521
 522 Sun Jan 15 16:32:59 1995  Steve Chamberlain  <sac@splat>
 523
 524         * configure.in: Add W65 support.
 525         * disassemble.c: Likewise.
 526         * w65-opc.h, w65-dis.c: New files.
 527
 528 Wed Dec 28 22:15:33 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
 529
 530         * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
 531         immediates.
 532
 533 start-sanitize-arc
 534 Tue Dec 20 10:36:55 1994  Doug Evans  <dje@canuck.cygnus.com>
 535
 536         * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
 537         slot.
 538         * arc-opc.c (extract_reladdr): New function.
 539         (insert_reladdr): Store address right-shifted by 2.
 540 end-sanitize-arc
 541
 542 Tue Dec 20 11:25:12 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 543
 544         * mips-opc.c: Add dli as a synonym for li.
 545
 546 start-sanitize-arc
 547 Mon Dec 19 12:35:51 1994  Doug Evans  <dje@canuck.cygnus.com>
 548
 549         * arc-opc.c (insertion fns): Pass pointer to value's table entry.
 550         All uses changed.
 551         (extraction fns): Insn argument now array of two words.  Return pointer
 552         to value's table entry.  All uses changed.
 553         (arc_opcode_lookup_suffix): Exported for arc-dis.c.
 554         (insert_multshift, extract_multshift): New fns.
 555         (arc_operands): Add support for cache bypass suffix.  Add support for
 556         predefined aux regs.  Modifier bits moved to flags field.
 557         (arc_opcodes): Likewise.
 558         Add mul/mulu/shift insns.  Syntax of zero/sign extension insns changed.
 559         New insn rlc.  Update to syntax in programmer's manual.
 560         (arc_reg_names): Fix typo in lp_count.  Add predefined aux regs.
 561         (arc_suffixes): New synonyms lo,hs for cs,cc.  New suffix for cache
 562         bypass.
 563         (arc_opcode_init_tables): New argument to indicate cpu type.
 564         (insert_reg): Handle predefined aux regs.
 565         (extract_reg): Likewise.
 566         (lookup_register): New fn.
 567         * arc-dis.c (arc_condition_codes): Deleted.
 568         (print_insn_arc): Handle insns with 32 bit immediate constants better.
 569         Clean up modifier handling.  Handle predefined aux regs.
 570 end-sanitize-arc
 571
 572 Thu Dec  8 18:23:31 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
 573
 574         * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
 575         print something for reserved opcode values, even if it won't
 576         assemble again.
 577
 578         * mips-dis.c (_print_insn_mips): When initializing, shift right
 579         and mask, to avoid sign extension problems on the Alpha.
 580
 581         * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
 582         control registers.
 583
 584 start-sanitize-arc
 585 Tue Nov 29 18:02:43 1994  Doug Evans  <dje@canuck.cygnus.com>
 586
 587         * configure.in: Add ARC support.
 588         * disassemble.c: Likewise.
 589         * arc-dis.c, arc-opc.c: New files.
 590 end-sanitize-arc
 591
 592 Wed Nov 23 22:34:51 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
 593
 594         * sh-opc.h (mov.l gbr): Get direction right.
 595         * sh-dis.c (print_insn_shx): New function.
 596         (print_insn_shl, print_insn_sh): Call print_insn_shx to
 597         print opcodes with right byte order.
 598
 599 Thu Nov  3 19:32:22 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
 600
 601         * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
 602         to avoid conflicts with getopt.
 603
 604 Mon Oct 31 18:48:10 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 605
 606         * hppa-dis.c (print_insn_hppa): Read the instruction using
 607         bfd_getb32, so that it works on a little endian or 64 bit host.
 608         Remove unused local variable op.
 609
 610 Tue Oct 25 17:07:57 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 611
 612         * mips-opc.c: Use or instead of addu for pseudo-op move, since
 613         addu does not work correctly if -mips3.
 614
 615 Wed Oct 19 13:40:16 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 616
 617         * a29k-dis.c (print_special): Add special register names defined
 618         on 29030, 29040 and 29050.
 619         (print_insn): Handle new operand type 'I'.
 620
 621 Wed Oct 12 11:59:55 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 622
 623         * Makefile.in (INSTALL): Use top level install.sh script.
 624
 625 Wed Oct  5 19:16:29 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 626
 627         * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
 628         that it works on a little endian host.
 629
 630 Tue Oct  4 12:14:21 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 631
 632         * configure.in: Use ${config_shell} when running config.bfd.
 633
 634 Wed Sep 21 18:49:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 635
 636         * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
 637
 638 Thu Sep 15 16:30:22 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 639
 640         * a29k-dis.c (print_insn): Print the opcode.
 641
 642 Wed Sep 14 17:52:14 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 643
 644         * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
 645
 646 Sun Sep 11 22:32:17 1994  Jeff Law  (law@snake.cs.utah.edu)
 647
 648         * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
 649
 650 Tue Sep  6 11:37:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 651
 652         * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
 653         which store a value into memory.
 654
 655 Sun Sep 04 17:58:10 1994  Richard Earnshaw (rwe@pegasus.esprit.ec.org)
 656
 657         * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
 658         * arm-dis.c, arm-opc.h: New files.
 659
 660 Fri Aug  5 14:00:05 1994  Stan Shebs  (shebs@andros.cygnus.com)
 661
 662         * Makefile.in (ns32k-dis.o): Add dependency.
 663         * ns32k-dis.c (print_insn_arg): Declare initialized local as
 664         string, not as array of chars.
 665
 666 Thu Jul 28 18:14:16 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
 667
 668         * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
 669
 670         * sparc-opc.c: Added sparclite extended FP operations, and
 671         versions of v9 impdep* instructions permitting specification of
 672         the OPF field.
 673
 674 Tue Jul 26 16:36:03 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
 675
 676         * i960-dis.c (reg_names): Now const.
 677         (struct sparse_tabent): New type, copied from array type in mem
 678         function.
 679         (ctrl): Local static array ctrl_tab now const.
 680         (cobr): Local static array cobr_tab now const.
 681         (mem): Local variables reg1, reg2, reg3 now point to const.  Local
 682         static variable mem_tab no longer explicitly initialized.  Changed
 683         mem_init to const array of struct sparse_tabent.
 684         (reg): Local static variable reg_tab no longer explicitly
 685         initialized.  Changed reg_init to const array of struct
 686         sparse_tabent.
 687         (ea): Local static array scale_tab now const.
 688
 689         start-sanitize-i960xl
 690         * i960-dis.c (reg): Added i960XL instructions to reg_init table.
 691         (REG_MAX): Updated.
 692         end-sanitize-i960xl
 693
 694 Tue Jul 19 21:00:00 1994  DJ Delorie (dj@ctron.com)
 695
 696         * configure.bat: the disassember needs to be enabled for
 697         "objdump -d" to work in djgpp.
 698
 699 Wed Jul 13 18:01:58 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
 700
 701         * ns32k-dis.c: Deleted all code in "#ifdef GDB".
 702         (invalid_float): Enabled general version, doesn't require running
 703         on ns32k host.  Changed to take char* argument, and test for
 704         explicitly specified sizes, instead of using sizeof() on host CPU
 705         types.
 706         (INVALID_FLOAT): Cast first argument.
 707         (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
 708         list_P032, list_M032): Now const.
 709         (optlist, list_search): Made appropriate arguments now point to
 710         const.
 711         (print_insn_arg): Changed static array of one-character-string
 712         pointers into a static const array of characters; fixed sprintf
 713         statement accordingly.
 714
 715 Sun Jul 10 00:27:47 1994  Ian Dall  (dall@hfrd.dsto.gov.au)
 716
 717         * opcodes/ns32k-dis.c: Semi-new file.  Had apparently been dropped
 718         from distribution. A ns32k-dis.c from a previous distribution has
 719         been brought up to date and supports the new interface.
 720
 721         * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
 722
 723         * configure.in: add bfd_ns32k_arch target support.
 724
 725         * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
 726         Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
 727
 728 Wed Jun 29 22:10:37 1994  Steve Chamberlain  (sac@cygnus.com)
 729
 730         * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
 731         disassembly right.
 732
 733 Tue Jun 28 13:22:06 1994  Stan Shebs  (shebs@andros.cygnus.com)
 734
 735         * h8300-dis.c, mips-dis.c: Don't use true and false.
 736
 737 Thu Jun 23 12:53:19 1994  David J. Mackenzie  (djm@rtl.cygnus.com)
 738
 739         * configure.in: Change --with-targets to --enable-targets.
 740
 741 Wed Jun 22 13:38:32 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 742
 743         * mips-dis.c (_print_insn_mips): Build a static hash table mapping
 744         opcodes to the first instruction with that opcode, to speed
 745         disassembly of large files.  From ralphc@pyramid.com (Ralph
 746         Campbell).
 747
 748 Tue Jun  7 12:49:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 749
 750         * Makefile.in (mostlyclean): Fix typo (was mostyclean).
 751
 752 Wed May 11 22:32:00 1994  DJ Delorie (dj@ctron.com)
 753
 754         * configure.bat: update to latest makefile.in
 755
 756 Sat May  7 17:13:21 1994  Steve Chamberlain  (sac@cygnus.com)
 757
 758         * a29k-dis.c (print_insn): Print 'x' type operand in hex.
 759         * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
 760         * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
 761         slot insn is in a delay slot.
 762         * z8k-opc.h: (resflg): Fix patterns.
 763         * h8500-opc.h Fix CR insn patterns.
 764
 765 Fri May  6 14:34:46 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 766
 767         * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
 768         "cmpl" before POWER versions, so that gas -many uses them.
 769
 770 Thu Apr 28 18:32:36 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
 771
 772         * disassemble.c: New file.
 773         * Makefile.in (OFILES): Add disassemble.o.
 774         (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
 775         * configure.in: Define ARCHDEFS in Makefile.  Code taken from
 776         binutils/configure.in.
 777
 778         * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
 779         opcode being examined.
 780
 781 Thu Apr 21 17:08:40 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 782
 783         * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
 784         (insert_ral, insert_ram, insert_ras): New functions.
 785         (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
 786         RAS for store with update.
 787
 788 Sat Apr 16 23:41:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 789
 790         * ppc-opc.c (powerpc_opcodes): Correct fcir.  From David Edelsohn
 791         (edelsohn@npac.syr.edu).
 792
 793 Wed Apr  6 17:11:45 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 794
 795         * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
 796         immediate argument.
 797
 798 Mon Apr  4 16:30:46 1994  Doug Evans  (dje@canuck.cygnus.com)
 799
 800         * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
 801
 802 Mon Apr  4 13:22:00 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 803
 804         * ppc-opc.c (powerpc_operands): The signedp field has been
 805         removed, so don't initialize it.  Set the PPC_OPERAND_SIGNED flag
 806         instead.  Add new operand SISIGNOPT.
 807         (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
 808         Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
 809         * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
 810         than signedp field.
 811
 812 Wed Mar 30 00:31:49 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 813
 814         * i386-dis.c (struct private):  Renamed to dis_private. `private'
 815         is a reserved word for dynix cc.
 816
 817 Mon Mar 28 13:00:15 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 818
 819         * configure.in: Change error message to refer to bfd/config.bfd
 820         rather than bfd/configure.in.
 821
 822 Mon Mar 28 12:28:30 1994  David Edelsohn  (edelsohn@npac.syr.edu)
 823
 824         * ppc-opc.c: Define POWER2 as short alias flag.
 825         (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
 826         fsqrt.
 827
 828 Wed Mar 23 12:23:05 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 829
 830         * i960-dis.c (print_insn_i960): Don't read a second word for
 831         opcodes 0, 1, 2 and 3.
 832
 833 Wed Mar 16 15:37:58 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 834
 835         * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
 836
 837 Mon Mar 14 14:53:50 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 838
 839         * m68881-ext.c: Removed; no longer used.
 840         * Makefile.in: Changed accordingly.
 841
 842         * m68k-dis.c (ext_format_68881): Don't declare.
 843         (print_insn_m68k): If an instruction uses place 'i', it uses at
 844         least four fixed bytes.
 845         (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'.  For
 846         extended float, convert to double using floatformat_to_double, not
 847         ieee_extended_to_double, and fetch the data before converting it.
 848
 849 Tue Mar  8 18:12:25 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 850
 851         * mips-opc.c: It's sqrt.s, not sqrt.w.  From
 852         davidj@ICSI.Berkeley.EDU (David Johnson).
 853
 854 Tue Feb  8 16:55:27 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 855
 856         * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
 857         PowerPC uses bdnz[l][a].
 858
 859 Tue Feb  8 00:32:28 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 860
 861         * dis-buf.c, i386-dis.c:  Include sysdep.h.
 862
 863 Mon Feb  7 19:22:23 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 864
 865         * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
 866
 867         * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
 868         by Motorola PowerPC 601 with PPC_OPCODE_601.
 869         * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
 870         Disassemble Motorola PowerPC 601 instructions as well as normal
 871         PowerPC instructions.
 872
 873 Sun Feb  6 07:45:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
 874
 875         * i960-dis.c (reg, mem): Just use a static array instead of
 876         calling xmalloc.
 877
 878 Sat Feb  5 00:04:02 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
 879
 880         * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
 881         condition name index if this is for a negated condition.
 882
 883         * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
 884         Floating point format for 'H' operand is backwards from normal
 885         case (0 == double, 1 == single).  For '4', '6', '7', '9', and '8'
 886         operands (fmpyadd and fmpysub), handle bizarre register
 887         translation correctly for single precision format.
 888
 889         * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
 890         or 'I' operands if the next format specifier is 'M' (fcmp
 891         condition completer).
 892
 893 Feb  4 23:38:03 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 894
 895         * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
 896         single number giving a bitmask for the MB and ME fields of an M
 897         form instruction.  Change NB to accept 32, and turn it into 0;
 898         also turn 0 into 32 when disassembling.  Seperated SH from NB.
 899         (insert_mbe, extract_mbe): New functions.
 900         (insert_nb, extract_nb): New functions.
 901         (SC_MASK): Mask out SA and LK bits.
 902         (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
 903         RA, SI.  Change "liu" and "cau" to use UI rather than SI.  Mark
 904         "bctr" and "bctrl" as accepted by POWER.  Change "rlwimi",
 905         "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
 906         "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
 907         use MBE rather than MB.  Add "mfmq" and "mtmq" POWER instructions.
 908         (powerpc_macros): Define table of macro definitions.
 909         (powerpc_num_macros): Define.
 910
 911         * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
 912         if PPC_OPERAND_NEXT is set.
 913
 914 Sat Jan 22 23:10:07 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 915
 916         * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
 917         char.  Retrieve contents using bfd_getl32 instead of shifting.
 918
 919 Fri Jan 21 19:01:39 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 920
 921         * ppc-opc.c: New file.  Opcode table for PowerPC, including
 922         opcodes for POWER (RS/6000).
 923         * ppc-dis.c: New file.  PowerPC and Power (RS/6000) disassembler.
 924         * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
 925         (CFILES): Add ppc-dis.c.
 926         (ppc-dis.o, ppc-opc.o): New targets.
 927         * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
 928
 929 Mon Jan 17 20:05:49 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
 930
 931         * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
 932         No space before 'u', 'f', or 'N'.
 933
 934 Sun Jan 16 14:20:16 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
 935
 936         * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
 937         farther than we should.
 938
 939         * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
 940
 941 Thu Jan  6 12:38:05 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
 942
 943         * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
 944
 945 Wed Jan  5 11:56:21 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
 946
 947         * i960-dis.c (print_insn_i960): Only read word2 if the instruction
 948         needs it, to prevent reading past the end of a section.
 949
 950 Wed Nov 17 17:20:12 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 951
 952         * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
 953         Removed t,A case for la; always use t,A(b) case.
 954
 955 Mon Nov  8 12:37:36 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 956
 957         From Ted Lemen <mellon@pepper.ncd.com>
 958         * mips-dis.c (print_insn_arg): Handle 'k'.
 959         * mips-opc.c: Make cache use k, not t.
 960
 961 Sun Nov  7 23:52:34 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 962
 963         * alpha-opc.h, alpha-dis.c (print_insn_alpha):  Add
 964         FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
 965         FLOAT_FORMAT_CODE to put out floating point register names.
 966
 967 Mon Nov  1 18:17:51 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 968
 969         * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
 970
 971 Thu Oct 28 17:42:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 972
 973         * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
 974
 975 Wed Oct 27 11:48:01 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 976
 977         * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
 978         larger than 32.  Moved dsxx32 variants first for disassembler.
 979
 980 Mon Oct 25 11:33:14 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
 981
 982         * z8kgen.c, z8k-opc.h: Add full lda information.
 983
 984 Tue Oct 19 12:39:25 1993  Jeffrey A Law  (law@cs.utah.edu)
 985
 986         * hppa-dis.c (print_insn_hppa): Do not emit a space after
 987         movb instructions.  Any necessary space will be emitted by
 988         the code to handle nullification completers.
 989
 990 Wed Oct 13 16:19:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 991
 992         * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
 993
 994 Fri Oct  8 02:34:21 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 995
 996         * alpha-opc.h:  Add ldl_l, fix typo for ldq_u.
 997         * alpha-dis.c (print_insn_alpha):  Add code for PAL_FORMAT_CODE.
 998
 999 Tue Oct  5 17:47:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1000
1001         * mips-opc.c: Correct lwu opcode value (book had it wrong).
1002
1003 Thu Sep 30 11:26:18 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
1004
1005         * z8k-dis.c (FETCH_DATA): get just the right amount of data.
1006         (unpack_instr): Cope with ARG_IMM4M1 type instructions.
1007
1008 Wed Sep 29 16:24:49 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
1009
1010         * m88k-dis.c (m88kdis): comment change.  Remove space after
1011           printing mnemonic.
1012           (printop): handle new arg types DEC and XREG for m88110.
1013
1014 Tue Sep 28 19:20:16 1993  Jeffrey A Law (law@snake.cs.utah.edu)
1015
1016         * hppa-dis.c (print_insn_hppa): Handle 'z' operand
1017         type for absolute branch addresses.  Delete special
1018         "ble" and "be" code in 'W' operand code.
1019
1020 Fri Sep 24 14:08:33 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1021
1022         * mips-opc.c: Set hazard information correctly for branch
1023         likely instructions.
1024
1025 Fri Sep 17 04:41:17 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1026
1027         * alpha-dis.c (print_insn_alpha), alpha-opc.h:  Fix bugs, use
1028         info->fprintf_func for printing and info->print_address_func for
1029         address output.
1030
1031 Wed Sep 15 12:12:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1032
1033         * mips-opc.c: Set INSN_TRAP for tXX instructions.
1034
1035 Thu Sep  9 10:11:27 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1036
1037         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
1038         Corrected second case of "b" for disassembler.
1039
1040 Tue Sep  7 14:25:15 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1041
1042         * mips-dis.c, m88k-dis.c: Don't include libbfd.h.  Changed calls
1043         to BFD swapping routines to correspond to BFD name changes.
1044
1045 Thu Sep  2 10:35:25 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1046
1047         * mips-opc.c: Change div machine instruction to be z,s,t rather
1048         than s,t.  Change div macro to be d,v,t rather than d,s,t.
1049         Likewise for divu, ddiv, ddivu.  Added z,s,t case for drem, dremu,
1050         rem and remu which generates only the corresponding div
1051         instruction.  This is for compatibility with the MIPS assembler,
1052         which only generates the simple machine instruction when an
1053         explicit destination of $0 is used.
1054         * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
1055
1056 Thu Aug 26 17:41:44 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1057
1058         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
1059         WR_31 hazard for bal, bgezal, bltzal.
1060
1061 Thu Aug 26 17:20:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1062
1063         * hppa-dis.c (print_insn_hppa): Use print function
1064         from within the disassemble_info, not fprintf_filtered.
1065
1066 Wed Aug 25 13:51:40 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1067
1068         * hppa-dis.c (print_insn_hppa): Handle '|' like '>'.  (From Jeff
1069         Law, law@cs.utah.edu.)
1070
1071 Mon Aug 23 12:44:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1072
1073         * mips-opc.c ("absu"): Removed.
1074         ("dabs"): Added.
1075
1076 Fri Aug 20 10:52:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1077
1078         * mips-opc.c: Added r6000 and r4000 instructions and macros.
1079         Changed hazard information to distinguish between memory load
1080         delays and coprocessor load delays.
1081
1082 Wed Aug 18 15:39:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1083
1084         * mips-opc.c: li.d uses "T,L", not "S,F".  Added li.s.
1085
1086 Tue Aug 17 09:44:42 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
1087
1088         * configure.in: Don't pass cpu to config.bfd.
1089
1090 Tue Aug 17 12:23:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1091
1092         * m88k-dis.c (m88kdis): Make class unsigned.
1093
1094 Thu Aug 12 15:08:18 1993  Ian Lance Taylor  (ian@cygnus.com)
1095
1096         * alpha-dis.c (print_insn_alpha): One branch format case was
1097         missing the instruction name.
1098
1099 Wed Aug 11 19:29:39 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
1100
1101         * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
1102         Add the arch-specific auxiliary files.
1103         (OFILES): Remove the arch-specific auxiliary files
1104         and use BFD_MACHINES instead of DIS_LIBS.
1105         * configure.in: Set BFD_MACHINES based on --with-targets option.
1106
1107 Thu Aug 12 12:04:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1108
1109         * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b).  Similarly
1110         for swc1.
1111
1112 Sun Aug  8 15:09:30 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1113
1114         * sparc-opc.c: Change CONST to const to deal with gcc
1115         -Dconst=__const -traditional.
1116
1117 Fri Aug  6 10:58:55 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1118
1119         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
1120         coprocessor instructions out of #if 0, and made them use new
1121         argument type "C".
1122
1123 Thu Aug  5 17:11:06 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1124
1125         * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
1126
1127 Fri Jul 30 18:48:15 1993  John Gilmore  (gnu@cygnus.com)
1128
1129         * sparc-opc.c:  Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
1130         instruction, for use by the disassembler.
1131
1132         * sparc-dis.c (SEX):  Add sign extension macro.  Replace many
1133         hand-coded sign extensions that depended on 32-bit host ints.
1134         FIXME, we still depend on big-endian host bitfield ordering.
1135         (sparc_print_insn):  Set the insn_info_valid field, and the
1136         other fields that describe the instruction being printed.
1137
1138 Tue Jul 27 17:04:58 1993  Jim Wilson  (wilson@sphagnum.cygnus.com)
1139
1140         * sparc-opc.c (call): Accept all 6 addressing modes valid for
1141         `jmp' instead of just one of them.
1142
1143 Wed Jul 21 11:43:32 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
1144
1145         * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
1146         (fput_fp_reg_r): Renamed from fput_reg_r.
1147         (fput_fp_reg): New function.
1148         (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
1149
1150         * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
1151
1152         * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
1153
1154 Mon Jul 19 13:52:21 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
1155
1156         * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
1157
1158         * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
1159         don't output a space.
1160
1161         * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
1162
1163 Sun Jul 18 16:30:02 1993  Jim Kingdon  (kingdon@rtl.cygnus.com)
1164
1165         * mips-opc.c: New file, containing opcode table from
1166         ../include/opcode/mips.h.
1167         * Makefile.in: Add it.
1168
1169 Thu Jul 15 12:37:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1170
1171         * m88k-dis.c: New file, moved in from gdb and changed to use the
1172         new dis-asm.h disassembler interface.
1173         * Makefile.in (DIS_LIBS): Added m88k-dis.o.
1174         (m88k-dis.o): New target.
1175
1176 Tue Jul 13 10:04:16 1993  Ian Lance Taylor  (ian@cygnus.com)
1177
1178         * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
1179         argument string const char * to correspond to opcode/mips.h.
1180
1181 Tue Jul  6 15:18:37 1993  Ian Lance Taylor  (ian@cygnus.com)
1182
1183         * mips-dis.c: Updated to account for name changes in new version
1184         of opcode/mips.h.
1185         * Makefile.in: Added header file dependencies.
1186
1187 Sat Jul  3 23:47:56 1993  Doug Evans  (dje@canuck.cygnus.com)
1188
1189         * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
1190
1191 Thu Jul  1 12:23:38 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1192
1193         * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
1194         extend, rather than shifts.
1195
1196 Sun Jun 20 20:56:56 1993  Ken Raeburn  (raeburn@poseidon.cygnus.com)
1197
1198         * Makefile.in: Undo 15 June change.
1199
1200 Fri Jun 18 14:15:15 1993  Per Bothner  (bothner@deneb.cygnus.com)
1201
1202         * m68k-dis.c (print_insn_arg):  Change return value to byte count
1203         or error code.
1204         * m68k-dis.c:  Re-write to detect invalid operands before
1205         printing anything, so we can handle this the same way we
1206         handle invalid opcodes.
1207
1208 Thu Jun 17 15:01:36 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
1209
1210         * sh-dis.c, sh-opc.h: Understand some more opcodes.
1211
1212 Wed Jun 16 13:48:05 1993  Ian Lance Taylor  (ian@cygnus.com)
1213
1214         * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
1215         header files.
1216
1217 Tue Jun 15 21:45:26 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1218
1219         * sparc-dis.c: Don't declare qsort, since sysdep.h might.
1220
1221         * configure.in: Do make sysdep.h link.
1222         * Makefile.in: Search ../include.  Don't search ../bfd.
1223
1224 Tue Jun 15 13:36:10 1993  Stu Grossman  (grossman@cygnus.com)
1225
1226         Changes from Jeff Law, law@cs.utah.edu:
1227         * hppa-dis.c: Fix typo.  'a' and 'd' were reversed.
1228         Do not print a space before the completers specified by
1229         'a' and 'd'.
1230
1231 Fri Jun 11 18:40:21 1993  Ken Raeburn  (raeburn@cygnus.com)
1232
1233         * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
1234         defined, since gdb has been fixed.
1235
1236         Changes from Jeff Law, law@cs.utah.edu:
1237         * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
1238         fput_reg_r, fput_creg, fput_const, and fputs_filtered should
1239         be a *disassemble_info, not a *FILE.
1240         * hppa-dis.c: Support 'd', '!', and 'a'.
1241         * hppa-dis.c: Support 's' to extract a 2 bit space register.
1242         * hppa-dis.c: Delete cases which are no longer needed.
1243
1244 Fri Jun 11 07:53:48 1993  Jim Kingdon  (kingdon@cygnus.com)
1245
1246         * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
1247
1248 Tue Jun  8 12:25:01 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
1249
1250         * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
1251         H8/300-H opcodes.
1252
1253 Mon Jun  7 12:58:49 1993  Per Bothner  (bothner@rtl.cygnus.com)
1254
1255         * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
1256         * configure.in:  No longer need to configure to get sysdep.h.
1257
1258 Thu Jun  3 15:56:49 1993  Stu Grossman  (grossman@cygnus.com)
1259
1260         * Patches from Jeffrey Law <law@cs.utah.edu>.
1261         * hppa-dis.c: Support 'I', 'J', and 'K' in output
1262         templates for 1.1 FP computational instructions.
1263
1264 Tue May 25 13:05:48 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1265
1266         * h8500-dis.c (print_insn_h8500): Address argument is type
1267         bfd_vma.
1268         * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
1269         Ditto.
1270
1271         * h8500-opc.h (addr_class_type): No comma at end of enumerator.
1272         * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
1273
1274         * sparc-dis.c (compare_opcodes): Move static declaration to
1275         top-level.
1276
1277 Fri May 21 14:17:37 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1278
1279         * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
1280         instruction, remove unimp hack from 'l' argument.
1281
1282 Wed May 19 15:35:54 1993  Stu Grossman  (grossman@cygnus.com)
1283
1284         * z8k-dis.c (fetch_data):  Use unsigned char to make ancient gcc's
1285         happy.
1286
1287 Fri May 14 15:22:46 1993  Ian Lance Taylor  (ian@cygnus.com)
1288
1289         * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
1290         * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
1291         instructions.
1292
1293 Fri May 14 00:09:14 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1294
1295         * hppa-dis.c: Include dis-asm.h before sysdep.h.  Changed some
1296         arrays of string pointers to 2-d arrays of chars, to save
1297         space.
1298
1299 Thu May  6 20:51:17 1993  Fred Fish  (fnf@cygnus.com)
1300
1301         * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
1302         Cast second arg to read_memory_func to "bfd_byte *", as necessary.
1303
1304 Tue May  4 20:31:10 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1305
1306         * hppa-dis.c: New file from Utah, adapted to new disassembler
1307         calling interface.
1308         * Makefile.in: Include it.
1309
1310 Mon Apr 26 18:17:42 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1311
1312         * sh-dis.c, sh-opc.h: New files.
1313
1314 Fri Apr 23 18:51:22 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1315
1316         * alpha-dis.c, alpha-opc.h: New files.
1317
1318 Tue Apr  6 12:54:08 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1319
1320         * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
1321         value.
1322
1323 Mon Apr  5 17:37:37 1993  John Gilmore  (gnu@cygnus.com)
1324
1325         * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
1326
1327 Fri Apr  2 07:24:27 1993  Ian Lance Taylor  (ian@cygnus.com)
1328
1329         * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
1330         const.
1331
1332 Thu Apr  1 11:20:43 1993  Jim Kingdon  (kingdon@cygnus.com)
1333
1334         * sparc-dis.c: Use fprintf_func a few places where I forgot,
1335         and double percent signs a few places.
1336
1337         * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
1338
1339         * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
1340         Use info->print_address_func not print_address.
1341
1342         * dis-buf.c (generic_print_address): New function.
1343
1344 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1345
1346         * Makefile.in: Add sparc-dis.c.
1347         sparc-dis.c: New file, merges binutils and gdb versions as follows:
1348         From GDB:
1349             Add `add' instruction to the set that get checked
1350             for a preceding `sethi' in order to print an absolute address.
1351             * (print_insn):  Disassembly prefers real instructions.
1352             (is_delayed_branch):  Speed up.
1353             * sparc-opcode.h: Add ALIAS bit to aliases.  Fix up opcode tables.
1354             Still missing some float ops, and needs testing.
1355             * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
1356             F_ALIAS.  Use printf, not fprintf, when not passing a file
1357             pointer...
1358             (compare_opcodes): Check that identical instructions have
1359             identical opcodes, complain otherwise.
1360         From binutils:
1361             * New 'm' arg.
1362             * Include reg_names.
1363         From neither:
1364             Use dis-asm.h/read_memory_func interface.
1365
1366 Wed Mar 31 20:49:06 1993  K. Richard Pixley  (rich@rtl.cygnus.com)
1367
1368         * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
1369           deliberately return non-zero to setjmp from longjmp.  Otherwise
1370           this code fails to compile.
1371
1372 Wed Mar 31 17:04:31 1993  Stu Grossman  (grossman@cygnus.com)
1373
1374         * m68k-dis.c:  Fix prototype for fetch_arg().
1375
1376 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1377
1378         * dis-buf.c: New file, for new read_memory_func interface.
1379         Makefile.in (OFILES): Include it.
1380         m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
1381         Use new read_memory_func interface.
1382
1383 Mon Mar 29 14:02:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1384
1385         * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
1386         * h8500-opc.h: Fix couple of opcodes.
1387
1388 Wed Mar 24 02:03:36 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
1389
1390         * Makefile.in: add dvi & installcheck targets
1391
1392 Mon Mar 22 18:55:04 1993  John Gilmore  (gnu@cygnus.com)
1393
1394         * Makefile.in:  Update for h8500-dis.c.
1395
1396 Fri Mar 19 14:27:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1397
1398         * h8500-dis.c, h8500-opc.h: New files
1399
1400 Thu Mar 18 14:12:37 1993  Per Bothner  (bothner@rtl.cygnus.com)
1401
1402         * mips-dis.c, z8k-dis.c:  Converted to use interface defined in
1403         ../include/dis-asm.h.
1404         * m68k-dis.c:  New file (merge of ../binutils/m68k-pinsn.c
1405         and ../gdb/m68k-pinsn.c).
1406         * i386-dis.c:  New file (merge of ../binutils/i386-pinsn.c
1407         and ../gdb/i386-pinsn.c).
1408         * m68881-ext.c:  New file.  Moved definition of
1409         ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
1410         * Makefile.in:  Adjust for new files.
1411         * i386-dis.c:  Patches from John Hassey (hassey@dg-rtp.dg.com).
1412         * m68k-dis.c:  Recognize '9' placement code, so (say) pflush
1413         can be dis-assembled.
1414
1415 Wed Feb 17 09:19:47 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1416
1417         * mips-dis.c (print_insn_arg): Now returns void.
1418
1419 Mon Jan 11 16:09:16 1993  Fred Fish  (fnf@cygnus.com)
1420
1421         * mips-dis.c (ansidecl.h):  Include for benefit of sysdep.h
1422         files that use the macros.
1423
1424 Thu Jan  7 13:15:17 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1425
1426         * mips-dis.c: New file, from gdb/mips-pinsn.c.
1427         * Makefile.in (DIS_LIBS): Added mips-dis.o.
1428         (CFILES): Added mips-dis.c.
1429
1430 Thu Jan  7 07:36:33 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1431
1432         * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
1433         * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
1434
1435 Tue Dec 22 15:42:44 1992  Per Bothner  (bothner@rtl.cygnus.com)
1436
1437         * Makefile.in:  Improve *clean rules.
1438         * configure.in:  Allow a default host.
1439
1440 Tue Nov 17 19:53:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1441
1442         * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
1443         files include other sysdep files
1444
1445 Thu Nov 12 16:10:37 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1446
1447         * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
1448
1449 Fri Oct  9 04:56:05 1992  John Gilmore  (gnu@cygnus.com)
1450
1451         * configure.in:  For host support, use ../bfd/configure.host
1452         so it stays in sync with the ../bfd/hosts database.
1453
1454 Thu Oct  1 23:38:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1455
1456         * configure.in: use cpu-vendor-os triple instead of nested cases
1457
1458 Wed Sep 30 16:09:20 1992  Michael Werner  (mtw@cygnus.com)
1459
1460         * z8k-dis.c (unparse_instr): fix bug where opcode returned was
1461         *always* the wrong one.
1462
1463 Wed Sep 30 07:42:17 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1464
1465         * z8kgen.c: added copyright info
1466
1467 Tue Sep 29 12:20:21 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1468
1469         * z8k-dis.c (unparse_instr): prettier tabs
1470         * z8kgen.c -> z8k-opc.h: bug fixes in tables
1471
1472 Fri Sep 25 12:50:32 1992  Stu Grossman  (grossman at cygnus.com)
1473
1474         * configure.in:  Add ncr* configuration.
1475         * z8k-dis.c (struct instr_data_s):  Make instr_asmsrc char to make
1476         picayune ANSI compilers happy.
1477
1478 Sep 20 08:50:55 1992  Fred Fish  (fnf@cygnus.com)
1479
1480         * configure.in (i386):  Make i386 and i486 synonymous for now.
1481         * configure.in (i[34]86-*-sysv4):  Add my_host definition.
1482
1483 Fri Sep 18 17:01:23 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1484
1485         * Makefile.in (install): Fix typo.
1486
1487 Fri Sep 18 02:04:24 1992  John Gilmore  (gnu@cygnus.com)
1488
1489         * Makefile.in (make):  Remove obsolete crud.
1490         (sparc-opc.o):  Avoid Sun Make VPATH bug.
1491
1492 Tue Sep  8 17:29:27 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
1493
1494         * Makefile.in: since there are no SUBDIRS, remove rule and
1495         references of subdir_do.
1496
1497 Tue Sep  8 17:02:58 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1498
1499         * Makefile.in (install): Get the library name right here too.
1500         Don't install bfd.h, since it's unrelated to this library.  No
1501         subdirs to recurse into, either.
1502         (CFILES): The source file has a .c suffix, not .o.
1503
1504         * sparc-opc.c: New file, moved from BFD.
1505         * Makefile.in (OFILES): Build it.
1506
1507 Thu Sep  3 16:59:20 1992  Michael Werner  (mtw@cygnus.com)
1508
1509         * z8k-dis.c: fixed forward refferences of some declarations.
1510
1511 Mon Aug 31 16:09:45 1992  Michael Werner  (mtw@cygnus.com)
1512
1513         * Makefile.in: get the name of the library right
1514
1515 Mon Aug 31 13:47:35 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1516
1517         * z8k-dis.c: knows how to disassemble z8k stuff
1518         * z8k-opc.h: new file full of z8000 opcodes
1519
1520 \f
1521 Local Variables:
1522 version-control: never
1523 End: