2 Wed Jun 24 09:53:06 1998 Jeffrey A Law (law@cygnus.com)
4 * mn10300-opc.c (mn10300_opcodes): Fix typo in IMM24 versions of the
5 am33 shift instructions.
7 * mn10300-dis.c (print_insn_mn10300): 0xf9 opcode prefix specifies
9 (disassemble): Handle new instruction formats FMT_D6, FMT_D7, FMT_D8
10 FMT_D9 and FMT_D10. Handle various new opcode flags for the am33.
12 * mn10300-opc.c (IMM32_HIGH8_MEM): New operand type.
13 (mn10300_opcodes): Reorder so as to try and select opcodes from
14 the core chip when multiple alternatives exist. Change several
15 am33 instructions to use IMM32_HIGH8_MEM. Fix typos in "mac" and
16 "macbu" instructions. Fix typos in a couple DSP instructions too.
19 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
21 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
22 related to sign extension and the size of ints.
24 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
26 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
27 instructions. Support (sp) addressing mode by expanding it into
31 Mon Jun 22 13:36:27 1998 Jeffrey A Law (law@cygnus.com)
33 * m10300-opc.c: Support 4 byte DSP instructions.
36 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
38 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
41 Fri Jun 19 16:47:06 1998 Jeffrey A Law (law@cygnus.com)
43 * m10300-opc.c: Support 6 and 7 byte am33 instructions.
46 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
48 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
51 Fri Jun 19 09:42:51 1998 Jeffrey A Law (law@cygnus.com)
53 * m10300-opc.c: Support for 3 byte and 4 byte extended instructions
57 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
59 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
62 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
64 * mips-dis.c (print_insn_little_mips): Previously, instruction
65 printing references the symbol table to determine whether the
66 instruction resides in a block regular instructions or mips16
67 instructions. However, when the disassembler gets used in other
68 environments where the symbol table is not present, we no longer
69 rely in the symbol table, rather, use the low bit of the
70 instructions address to guess. There should be no change for usage
71 of the disassembler in host based programse, gdb ,objdump.
72 (print_insn_big_mips): ditto.
73 (print_insn_mips): ditto
75 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
77 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
79 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
82 * m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
83 operands for the am33.
84 (mn10300_opcodes): Add new instructions from the am33.
86 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
88 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
90 * i386-dis.c (index16): Add '%' to register names. Use ','
93 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
95 * i386-dis.c: Don't print opcode suffix when we can figure out the
96 size (and gas can!) by register operands, or from the default
98 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
100 (dis386, dis386_twobyte, grps): Use new suffix macros.
101 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
102 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
103 order of cmps operands to agree with Intel docs. Correct operand
104 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
105 agree with Intel docs.
106 (print_insn_x86): Print orphan fwait before other prefixes.
107 Return correct byte count for orphan fwait with prefixes. Don't
108 print `bound' operands in reverse order.
109 (ckprefix): Stop accumulating prefixes if we get fwait.
110 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
112 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
114 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
115 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
117 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
119 Fix problems when bfd_vma is wider than long.
120 * i386-dis.c: Make op_address and start_pc unsigned.
121 (set_op): Make parameter unsigned.
122 (print_insn_x86): Cast to bfd_vma when passing a value to
124 * ns32k-dis.c (CORE_ADDR): Don't define.
125 (print_insn_ns32k): Change type of addr to bfd_vma. Use
126 bfd_scan_vma to read back address.
127 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
129 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
130 (NEXTULONG): New definition.
131 (print_insn_m68k): Avoid overflow when computing third argument of
133 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
134 Use disp instead of val to store offset values.
135 (print_indexed): Use base_disp instead of word to store base
136 displacement, to avoid overflow.
137 * m10300-dis.c (disassemble): Cast value to long when computing
138 pc-relative address, to get correct sign extension.
140 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
142 * m32r-opc.c: Regenerate.
144 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
146 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
147 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
149 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
151 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
153 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
155 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
157 (OP_DSreg): Rename from OP_DSSI.
158 (OP_ESreg): Rename from OP_ESDI.
159 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
161 (append_seg): Rename from append_prefix.
162 (ptr_reg): New function.
163 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
165 (PREFIX_ADDR): Rename from PREFIX_ADR.
166 (float_reg): Add non-broken opcodes for people who don't want
169 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
171 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
174 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
176 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
178 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
180 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
181 0; produce error message for shifts of size 32 (or 64 for 64-bit
182 shifts), because the hardware doesn't support them.
185 Mon Jun 1 10:27:26 1998 Jeffrey A Law (law@cygnus.com)
187 * mips-opc.c (c.lt.s): Remove r5900 specific variant.
190 * vu0.h (sqc2): Fix opcode.
192 * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
196 start-sanitize-vr5400
197 Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
199 * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
200 Change pinfo to use WR_HILO.
204 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
206 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
207 LONG_2, LONG_2b formats to use this new operand.
210 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
212 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
214 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
216 * sparc-dis.c (print_insn_sparc): big endian instruction / little
220 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
222 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
223 and SHORT_B3b formats to use Rb instead of Ra.
225 Add FLAG_MUL16 to MUL2XH opcode.
227 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
228 to existing 1.1.1 parallelisation prohibition procedure.
231 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
233 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
234 * cgen-dis.in (extract_normal): Likewise.
235 * m32r-asm.c,m32r-dis.c: Regenerate.
238 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
240 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
244 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
246 * mips-opc.c (multu1): Add two operand variant for the r5900.
249 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
251 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
252 with a shift count of 0.
255 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
257 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
259 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
261 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
262 (_print_insn_mips): Likewise.
263 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
267 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
269 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
270 (cgen_hw_lookup_by_num): New function.
273 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
276 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
278 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
280 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
282 * sparc-dis.c (print_insn_sparc): Always fetch instructions
283 as big-endian on SPARClite.
286 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
288 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
290 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
295 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
297 * d30v-opc.c (pre_defined_register): Remove alias for r0.
301 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
303 * mips-opc.c (break): Added 20-bit single-operand break
304 instruction for R5900 only.
307 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
309 * po/Make-in (install-info): New target.
311 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
313 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
314 * configure: Rebuild.
316 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
318 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
319 variety of ISA2 instructions to set bottom ten bits of trap code.
321 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
323 * Makefile.am (config.status): Add explicit target so that
324 config.status depends upon bfd/configure.in.
325 * Makefile.in: Rebuild.
327 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
329 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
330 instructions to set bottom ten bits of break code.
331 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
332 for above optional argument.
334 start-sanitize-cygnus
335 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
337 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
338 * m32r-opc.h: Regenerate.
341 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
343 * makefile.vms: Run dec c with /nodebug.
345 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
347 * Makefile.in: Rebuilt.
348 * Makefile.am: Regenerated dependencies with mkdep.
350 * opintl.h (_): Define as dgettext.
352 start-sanitize-cygnus
353 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
355 * configure.in: Add support for --enable-cgen-maint.
356 * Makefile.am (M32R_DEPS): New variable.
357 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
358 * aclocal.m4: Regenerate.
359 * Makefile.in: Regenerate.
360 * configure: Regenerate.
362 * Makefile.am (CGENFILES): Add minsn.scm.
365 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
367 * cgen-asm.c: Internationalised.
368 start-sanitize-cygnus
369 * cgen-asm.in: Internationalised.
370 * cgen-opc.in: Internationalised.
372 * m32r-asm.c: Internationalised.
373 * m32r-dis.c: Internationalised.
374 * m32r-opc.c: Internationalised.
376 * aclocal.m4: Regenerated.
377 * configure: Regenerated.
378 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
379 * Makefile.in: Rebuild.
380 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
381 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
383 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
385 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
387 * aclocal.m4, configure: Rebuild with current tools.
389 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
391 * opintl.h: New file - contains internationalisation macros used
392 by source files in this directory.
393 * po/: New subdirectory - contains internationalisation files.
394 * po/Make-in: New file - Makefile constructor.
395 * po/POTFILES.in: New file - list of files in opcodes directory
396 that should be scan for internationalisation macros.
397 * po/opcodes.pot: New file - list of internationisation strings
398 found in files mentioned in po/POTFILES.in.
399 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
400 entry. Add intl directory to include paths.
401 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
402 HAVE_STRCPY, HAVE_LC_MESSAGES
403 * configure.in: Add rule to build Makefile in po subdirectory.
404 * Makefile.in: Rebuilt.
405 * aclocal.m4: Rebuilt.
406 * config.in: Rebuilt.
407 * configure: Rebuilt.
408 * alpha-opc.c: Internationalised.
409 * arc-dis.c: Internationalised.
410 * arc-opc.c: Internationalised.
411 * arm-dis.c: Internationalised.
412 * cgen-asm.c: Internationalised.
414 * d30v-dis.c: Internationalised.
416 * dis-buf.c: Internationalised.
418 * dvp-dis.c: Internationalised.
419 * dvp-opc.c: Internationalised.
421 * h8300-dis.c: Internationalised.
422 * h8500-dis.c: Internationalised.
423 * i386-dis.c: Internationalised.
424 * m10200-dis.c: Internationalised.
425 * m10300-dis.c: Internationalised.
426 * m68k-dis.c: Internationalised.
427 * m88k-dis.c: Internationalised.
428 * mips-dis.c: Internationalised.
429 * ns32k-dis.c: Internationalised.
430 * opintl.h: Internationalised.
431 * ppc-opc.c: Internationalised.
432 * sparc-dis.c: Internationalised.
433 * v850-dis.c: Internationalised.
434 * v850-opc.c: Internationalised.
436 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
438 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
439 (asm_hash_table_entries): New variable.
440 (cgen_asm_init): Free asm_hash_table_entries.
441 (hash_insn_array,hash_insn_list): New functions.
442 (build_asm_hash_table): Use them. Hash macro insns as well.
443 (cgen_asm_lookup_insn): Update.
444 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
445 (dis_hash_table_entries): New variable.
446 (cgen_dis_init): Free dis_hash_table_entries.
447 (hash_insn_array,hash_insn_list): New functions.
448 (build_dis_hash_table): Use them. Hash macro insns as well.
449 (cgen_dis_lookup_insn): Update.
450 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
451 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
452 (cgen_macro_insn_count): New function.
453 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
454 All callers updated. Sanity check result of extract fn.
455 (@arch@_cgen_get_insn_operands): Change result type to void.
456 Delete args insn_value, length. New arg fields. All callers updated.
457 (@arch@_cgen_lookup_get_insn_operands): New function.
458 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
460 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
462 * i386-dis.c (OP_DSSI): Print segment override.
465 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
467 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
471 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
473 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
477 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
479 * vu0.h (vlqd, vlqi): Update per revised specs.
483 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
485 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
486 (vif_operands): Update.
487 (vif_get_unpackloc): Delete.
488 (state_vif_unpackloc{,_star_p}): Delete.
489 (dvp_opcode_init_parse): Update.
490 (vif_unpack_len_value): Avoid divide by zero.
494 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
496 * vu0.h: Specs changed for VCALLMSR bit pattern.
497 * mips-dis.c: (print_insn_arg) Matching change.
500 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
502 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
505 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
507 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
508 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
509 * configure.in: Define and substitute WIN32LDFLAGS and
511 * aclocal.m4: Rebuild with new libtool.
512 * configure, Makefile.in: Rebuild.
515 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
517 * vu0.h: Corrected bit pattern for VMAXI opcode.
520 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
522 * m32r-opc.c: Regenerate.
525 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
527 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
528 (dvp_expand_macro): Implement.
529 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
530 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
533 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
535 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
536 before trying to copy it.
537 * Makefile.in: Rebuild.
539 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
541 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
544 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
546 * m32r-opc.c: Fix bit patterns for SAT and SATB.
549 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
551 * ns32k-dis.c (bit_extract_simple): New function to extract bits
552 from an arbitrary valid buffer instead of fetching them on demand
554 (invalid_float): use bit_extract_simple() instead of bit_extract().
557 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
559 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
560 * m32r-opc.h: Add extra control registers.
563 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
565 From H.J. Lu <hjl@gnu.org>:
566 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
569 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
571 * Branched binutils 2.9.
574 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
576 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
577 disassembling last 4 bytes of a section.
580 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
582 Fix some gcc -Wall warnings:
583 * arc-dis.c (print_insn): Add casts to avoid warnings.
584 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
585 * d10v-dis.c (dis_long, dis_2_short): Likewise.
587 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
588 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
589 (parse_bc, parse_vfreg, parse_accdest): Likewise.
590 (parse_ffstreg, parse_vif_mode): Likewise.
592 * m10200-dis.c (disassemble): Likewise.
593 * m10300-dis.c (disassemble): Likewise.
594 * ns32k-dis.c (print_insn_ns32k): Likewise.
595 * ppc-opc.c (insert_ral, insert_ram): Likewise.
596 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
597 * cgen-opc.c (cgen_keyword_search_next): Likewise.
598 * d10v-dis.c (dis_long, dis_2_short): Likewise.
600 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
603 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
604 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
605 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
607 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
609 * tic80-dis.c (print_one_instruction): Likewise.
611 * w65-dis.c (print_operand): Likewise.
612 * z8k-dis.c (fetch_data): Likewise.
613 * a29k-dis.c: Add return type for find_byte_func_type.
614 * arc-opc.c: Include <stdio.h>. Remove declarations of
615 insert_multshift and extract_multshift.
617 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
619 (extract_value): Fully parenthesize expression.
622 * dvp-opc.c: Include <ctype.h>.
623 (print_sdest): Add default case to switch.
625 * h8500-dis.c (print_insn_h8500): Initialize local variables.
626 * h8500-opc.h (h8500_table): Fully bracket initializer.
627 * w65-opc.h (optable): Likewise.
628 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
629 * i386-dis.c (OP_E): Initialize local variables.
630 * m10200-dis.c (print_insn_mn10200): Likewise.
631 * mips-dis.c (print_insn_mips16): Likewise.
632 * sh-dis.c (print_insn_shx): Likewise.
633 * v850-dis.c (print_insn_v850): Likewise.
634 * ns32k-dis.c (print_insn_arg): Declare.
635 (get_displacement, invalid_float): Declare.
636 (list_search, sign_extend, flip_bytes): Declare return type.
637 (get_displacement): Likewise.
638 (print_insn_arg): Likewise. Make d int. Fix sprintf format
640 (print_insn_ns32k): Make i unsigned.
641 (invalid_float): Make static. Declare type of val.
642 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
643 on each for iteration.
644 * tic30-dis.c (get_indirect_operand): Likewise.
645 * z8k-dis.c (print_insn_z8001): Declare return type.
646 (print_insn_z8002): Likewise.
647 (unparse_instr): Fix sprintf format strings.
649 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
651 * mips-opc.c: Add "sync.l" and "sync.p".
654 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
656 * dvp-opc.c (extract_vif_datalen): Rewrite.
657 (vif_insn_len): Perform 0->max+1 conversion for direct length.
659 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
661 * dvp-dis.c (print_insn): Print unpack address in hex.
662 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
663 Don't skip over '*', just record it.
664 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
665 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
666 Don't skip over '*', just record it.
667 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
668 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
669 (vif_opcodes): Likewise.
670 (state_vif_{mpg,unpack}loc_star_p): New static locals.
671 (vif_macros,vif_macro_count): New globals.
672 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
673 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
674 (vif_get_wl_cl): New function.
675 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
678 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
680 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
681 default m68k variant to recognize.
683 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
684 (ctrl, cobr, mem, ea): Likewise.
685 (print_addr): Likewise. Remove cast.
686 (ea): Cast argument of print_addr to bfd_vma.
688 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
690 (cgen_parse_unsigned_integer): Likewise.
691 (cgen_parse_address): Likewise.
693 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
695 * i960-dis.c (ctrl): Add full braces to structure initialization.
696 (cobr, mem, reg): Likewise.
697 (ea): Correct parenthesization in expression.
699 * cgen-asm.c: Include <ctype.h>.
700 (build_asm_hash_table): Remove unused local variable i.
701 (cgen_parse_keyword): Add casts to avoid warnings.
703 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
704 symbol. Fix indentation.
705 (print_insn_little_arm): Likewise.
708 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
710 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
715 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
717 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
722 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
724 * dvp-opc.c (vif_operand_datalen_special): New global.
728 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
730 * vu0.h (vcallms): Use 'O' for call target operand.
731 * mips-dis.c (print_insn_arg): Handle 'O'.
734 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
736 * configure.in: Use AM_DISABLE_SHARED.
737 * aclocal.m4, configure: Rebuild with libtool 1.2.
740 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
742 * mips-dis.c: Change '%' to '#' in r5900 support.
746 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
748 These patches are courtesy of Jonathan Walton and Tony Thompson
749 (athompso@cambridge.arm.com).
751 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
754 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
755 both the offset and the label closest to the destination.
758 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
760 * vu0.h: New file with cop2/vu0 instructions.
761 * mips-opc.c: Include vu0.h.
762 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
764 (print_insn_mips): Do not emit a tab after an instruction if the
765 first arg is an instruction completer (&). If the next arg is an
766 escape character (%), then print the next arg verbatim.
767 * Makefile.am (mips-opc.lo): Depend on vu0.h
771 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
773 * dvp-opc.c (vif_opcodes): Add stcycl.
775 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
777 * dvp-dis.c (print_dma): Change length from 16 to 8.
780 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
782 * m32r-opc.h: Regenerate.
785 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
787 * dvp-opc.c (print_dest1): Print dest spec again.
788 (print_vfreg,print_accdest): Likewise.
789 (vif_unpack_len): Round result up to word boundary.
792 start-sanitize-vr4320
793 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
795 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
797 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
799 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
804 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
806 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
807 (print_insn): Do mask comparison on proper opcode word.
808 Print unsigned values in hex.
809 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
810 (parse_bc): Catch missing dest.
811 (parse_vfreg): Replace atoi call with strtol.
812 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
813 (parse_bcftreg,parse_ffstreg): Handle missing dest.
814 (extract_gif_eop): New function.
815 (gif_operands): Update eop entry.
816 (VGIFOP,VGIFNREGS): Fix calcs.
817 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
818 (gif_regs): Add entry for unused 11 case.
819 (print_gif_regs): Print empty list instead of nothing.
820 (extract_gif_nloop): Fix value calc.
821 (print_gif_nloop): Always print value, even if 0.
822 (insert_vif_wlcl,extract_vif_wlcl): New functions.
823 (vif_operands): Use them for wl,cl fields.
824 (state_vif_wl,state_vif_cl): New static locals.
825 (parse_vif_mode): Handle numeric args.
826 (vif_unpack_len_value,vif_unpack_len): New functions.
827 (vif_insn_len): Call vif_unpack_len.
830 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
832 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
834 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
836 * cgen-asm.in: Move insertion of generated routines to top of file.
837 (insert_normal): Add prototype. Delete `shift' arg.
838 * cgen-dis.in: Move insertion of generated routines to top of file.
839 (extract_normal): Add prototype. Delete `shift' arg.
840 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
841 (print_keyword): Add prototype. Fix type of `attrs' arg.
843 start-sanitize-vr4320
844 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
846 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
847 * mips-opc.c ("mac","dmac") : Added 4320 insns.
850 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
852 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
853 assume that info->symbols is non-empty.
855 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
857 * alpha-opc.c (cvtqs) There is no such thing.
858 (cvttq): Missing most of the /*d variants.
861 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
863 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
865 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
866 (r5900/msub.s): Takes three operands, not four. Fix opcode.
870 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
872 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
873 delayed branches or jumps.
877 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
879 * dvp-opc.c (vif_operands): Add unpack[u] support.
880 (vif_opcodes): Ditto.
881 (*_vif_imrubits): Renamed from *_vif_imrbits.
883 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
885 * dvp-dis.c (print_insn): Handle word number.
886 Handle mips address vs vu address.
887 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
888 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
889 ({insert,extract}_dma_addr): Fix word ofset.
890 ({insert,print}_gif_regs): Fix encode/decode.
893 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
895 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
897 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
898 * tic30-dis.c (print_branch): Likewise.
900 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
901 * dvp-dis.c (dvp_info_mach_type): New function.
902 (print_insn_dvp): Call it.
903 (print_vif): Return length of 4 if mpg or direct insn so following
904 insns get properly disabled.
905 (print_gif): Fix word order.
906 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
907 (gif_operands): Fix word order.
908 (gif_opcodes): Likewise.
909 ({insert,extract,print}_gif_regs): Likewise.
910 (gif_regs): Add new register number/name changes.
911 (dma_opcodes): Add dmarefe insn.
914 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
916 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
917 saved_symbol code as it is no longer needed.
919 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
921 * cgen-asm.c: Include symcat.h.
922 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
924 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
927 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
929 * dvp-opc.c (extra_dma_flags): Fix typos.
930 (dma_operands): Fix word numbers.
931 (dma_opcodes): Likewise.
932 ({insert,extract}_dma_flags): Likewise.
935 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
937 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
940 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
942 * dvp-dis.c (print_gif): Complete.
943 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
944 (state_gif_{nregs,regs,nloop}): New static locals.
946 (dvp_opcode_init_{parse,print}): Init gif state locals.
947 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
948 (vif_insn_len): Handle `unpack'.
949 ({insert,extract}_dma_flags): Complete.
953 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
955 * mips-opc.c (mula.s): Renamed from multa.s.
958 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
960 * m32r-opc.[ch]: Regenerate.
963 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
965 * dvp-opc.c (dma_operands): Rewrite.
966 (dma_operand_{count,addr}): New globals.
967 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
968 (insert_dma_addr): Insert value into insn.
969 (extract_dma_addr): Extract value from insn.
971 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
973 * dvp-dis.c (print_vu): Handle loi insns.
974 (print_insn): Likewise.
975 * dvp-opc.c (vu_lower_opcodes): Add "loi".
976 (vu_operands): Make LDEST1 a FAKE operand.
977 (parse_dest1): Allow elided argument.
978 (print_dest1): Don't print the argument.
980 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
982 * dvp-opc.c (parse_vfreg): Dest spec is optional.
983 (print_vfreg): Don't print dest spec.
984 (parse_accdest): Dest spec is optional.
985 (print_accdest): Don't print dest spec.
988 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
990 * Makefile.am (CGENFILES): Update.
991 * Makefile.in: Regenerate.
992 * cgen-asm.in (insert_normal): Result is error message now.
993 Validate value to be inserted.
994 (insert_insn_normal): Result is error message now.
995 (@arch@_cgen_assemble_insn): Update.
996 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
997 arguments. Don't perform validation here.
998 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1000 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1002 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
1003 operand instance list.
1004 * m32r-opc.c: Regenerate.
1006 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1008 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1009 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1011 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1013 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1015 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1017 * configure.in: Get the version number from BFD.
1018 * configure: Rebuild.
1020 From H.J. Lu <hjl@gnu.org>:
1021 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1022 * Makefile.in: Rebuild.
1024 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1026 * m32r-opc.c: Regenerate.
1027 * m32r-opc.h: Regenerate.
1029 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1031 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
1032 Ignore ALIAS insns if asked to.
1033 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
1034 * m32r-opc.c: Regenerate.
1037 * dvp.opc.c: Nicely format opcode tables.
1038 (vu_operands): New element UFLAGS.
1039 (parse_uflags,print_uflags): New functions.
1040 (vu_upper_opcodes): Add UFLAGS to all insns.
1043 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1045 Fix rac to accept only a0:
1046 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1047 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1048 Introduce OPERAND_GPR.
1049 * d10v-dis.c (print_operand): Likewise.
1051 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1053 * cgen-opc.in: New file.
1054 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
1055 * Makefile.am (CGENFILES): Add cgen-opc.in.
1056 * Makefile.in: Regenerate.
1058 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1059 (cgen_hw_lookup): Make result const.
1061 * cgen-dis.in (*): Use PTR instead of void *.
1062 (print_insn): Delete unused vars `i', `syntax'.
1064 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1067 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
1069 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
1070 (vif_opcodes): Update renamed insns.
1071 * dvp-dis.c (*): Likewise.
1074 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1076 * configure, aclocal.m4: Rebuild with new libtool.
1079 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1081 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1082 instructions use a PC relative branch, not absolute.
1085 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1087 * configure.in: Set libtool_enable_shared rather than
1088 libtool_shared. Remove diversion hack.
1089 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1091 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1093 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1094 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1096 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1098 * tic30-dis.c: New file.
1099 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1100 * configure.in: Handle bfd_tic30_arch.
1101 * Makefile.am: Rebuild dependencies.
1102 (CFILES): Add tic30-dis.c
1103 (ALL_MACHINES): Add tic30-dis.lo.
1104 * configure, Makefile.in: Rebuild.
1106 start-sanitize-m32rx
1107 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
1109 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
1110 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
1111 macwhi-a and macwlo-a instructions.
1115 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
1117 * dvp-opc.c, fixed encoding of a bunch of instructions to
1118 be consistent with the asmvu assembler (and inconsistent
1119 with the specification).
1121 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
1123 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
1124 in the opcode table. The pkemscalf instruction must come first.
1126 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
1128 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
1131 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1133 * m32r-opc.h (HAVE_CPU_M32R): Define.
1136 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
1138 * dvp-dis.c, dvp-opc.c: New files.
1139 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
1140 * configure: Regenerate.
1141 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
1142 (dvp-dis.lo,dvp-opc.lo): Add rules for.
1143 (mips-dis.lo): Compile with @archdefs@.
1144 * Makefile.in: Regenerate.
1145 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
1146 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
1149 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1151 * v850-opc.c (insertion routines): If both alignment and size is
1152 wrong then report this.
1154 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1156 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1157 Only recognize instructions for the current target_processor.
1159 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1161 * d10v-dis.c (PC_MASK): Correct value.
1162 (print_operand): If there's a reloc, don't calculate the
1163 address because they could be in different sections.
1165 start-sanitize-cygnus
1166 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
1168 * cgen.sh: Rewrite to be like simulator's version.
1169 * Makefile.am (cgen): Update call to cgen.sh.
1170 * Makefile.in: Regenerate
1173 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1175 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1176 instruction after the 4650's "mul" instruction; nobody's using the
1177 4010 these days. If object files someday indicate which processor
1178 variant they're intended for, we can do a better job at this.
1180 start-sanitize-r5900
1181 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
1183 * mips-opc.c (c.lt.s): Add r5900 variant.
1187 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1189 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1190 table provided entry size. Use CGEN_INSN_MNEMONIC.
1191 (cgen_parse_keyword): Rewrite.
1192 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1193 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1194 * cgen-opc.c: Clean up pass over `struct foo' usage.
1195 (cgen_keyword_lookup_value): Handle "" entry.
1196 (cgen_keyword_add): Likewise.
1197 start-sanitize-cygnus
1198 * Makefile.am: Add cgen support.
1199 * Makefile.in: Regenerate.
1200 * configure.in: Add cgen support.
1201 * configure: Regenerate.
1202 * aclocal.m4: Regenerate.
1203 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1206 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1208 * mips-opc.c: Add FP_D to s.d instruction flags.
1210 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1212 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1214 start-sanitize-tic80
1215 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1217 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1218 PC relative offset forms before the 15 bit forms. An assembler command
1219 line option now chooses the default.
1222 start-sanitize-r5900
1223 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1225 * mips-opc.c: Add many missing r5900 instructions.
1229 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1231 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1232 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1235 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1237 * configure: Only build libopcodes shared if --enable-shared's value
1238 was `yes', or was set to `*opcodes*'.
1239 * aclocal.m4: Likewise.
1240 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1241 original source of this bit of code. It's not clear what the best fix
1244 start-sanitize-r5900
1245 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1247 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1249 start-sanitize-tic80
1250 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1252 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1253 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1254 offset forms before the 15 bit forms, to default to the long forms.
1257 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1259 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1261 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1263 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1264 symbol if none is present.
1265 (print_insn_big_arm): Prevent examination of stored symbol if
1268 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1270 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1272 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1274 * disassemble.c: Remove disasm_symaddr() function.
1276 * arm-dis.c: Use info->symbol instead of info->flags to determine
1277 if disassmbly should be in Thumb or Arm mode.
1279 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1281 * arm-dis.c: Add support for disassembling Thumb opcodes.
1282 (print_insn_thumb): New function.
1284 * disassemble.c (disasm_symaddr): New function.
1286 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1287 (thumb_opcodes): Table of Thumb opcodes.
1289 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1291 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1293 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1294 and 'v' as operand types.
1296 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1298 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1299 <olivier.carmona@di.epfl.ch>.
1300 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1301 which has a two word opcode with a one word argument.
1304 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1306 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1307 unsigned, not signed.
1308 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1311 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1313 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1314 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1315 (ftrv): Slay the cut-and-paste monster.
1317 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1319 * d10v-dis.c (print_operand):
1320 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1322 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1324 * d10v-opc.c (OPERAND_FLAG): Split into:
1325 (OPERAND_FFLAG, OPERAND_CFLAG) .
1329 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1331 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1332 field for all INSN_MACRO's.
1333 * mips16-opc.c: same
1335 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1337 * mips-opc.c (sync,cache): These are 3900 insns.
1339 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1341 sh-opc.h (sh_table): Remove ftst/nan.
1343 start-sanitize-vr5400
1344 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
1346 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1347 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1349 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1353 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
1355 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1356 Add tx49 insns and configury.
1359 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1361 * mips-opc.c (ffc, ffs): Fix mask.
1364 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1366 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1370 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1372 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1373 start-sanitize-vr5400
1374 Added VR5400 instructions.
1375 (N5): New cpu-id macro.
1377 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1379 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1381 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1382 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1384 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1386 * v850-dis.c (disassemble): Replace // with /* ... */
1388 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1390 * sparc-opc.c: Add wr & rd for v9a asr's.
1391 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1392 (v9a_asr_reg_names): New variable.
1393 Patch from David Miller <davem@vger.rutgers.edu>.
1395 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1397 * sparc-opc.c (v9notv9a): New insn type.
1398 (IMPDEP): Move to the end to not conflict with edge8 et al.
1399 Patch from David Miller <davem@vger.rutgers.edu>.
1401 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1403 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1405 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1407 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1409 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1411 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1412 of disassemble_info structure to determine if an overlay address
1413 has a matching symbol in low memory.
1415 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1416 new symbol_at_address_func field in disassemble_info structure.
1418 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1420 * v850-opc.c (extract_d22): Use signed arithmatic.
1422 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1424 * mips-opc.c: Three op mult is not an ISA insn.
1426 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1428 * mips-opc.c: Fix formatting.
1430 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1432 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1433 than assuming that char is signed. Explicitly sign extend 16 bit
1434 values, rather than assuming that short is 16 bits.
1435 (OP_sI, OP_J, OP_DIR): Likewise.
1437 start-sanitize-v850e
1438 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1440 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1444 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1446 * v850-opc.c: Fix typo in comment.
1448 * v850-dis.c (disassemble): Add test of processor type when
1449 determining opcodes.
1451 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1453 * configure.in: Use a diversion to set enable_shared before the
1454 arguments are parsed.
1455 * configure: Rebuild.
1457 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1459 * m68k-opc.c (TBL1): Use ! rather than `.
1460 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1462 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1464 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1466 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1468 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1471 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1472 * aclocal.m4: Rebuild with new libtool.
1473 * configure: Rebuild.
1475 start-sanitize-v850e
1476 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1478 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1481 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1483 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1485 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1487 * v850-opc.c (v850_opcodes): Further rearrangements.
1490 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1492 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1495 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1497 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1500 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1502 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1504 * mips16-opc.c: Added mips16 sdbbp.
1507 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1509 * v850-opc.c: Initialise processors field of v850_opcode structure.
1512 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1514 Merge changes from Martin Hunt:
1516 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1518 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1519 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1520 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1522 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1524 * d30v-dis.c (print_insn): First operand of d*i (delayed
1525 branch) instructions is relative.
1527 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1528 (d30v_operand_table): Add IMM6S3 type.
1529 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1531 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1532 and cmp instructions.
1534 * d30v-opc.c: Correct entries for repeat*, and sat*.
1535 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1536 types. Correct several formats.
1538 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1540 * d30v-opc.c (pre_defined_registers): Change control registers.
1542 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1543 SHORT_C2. Manual was incorrect.
1545 * d30v-dis.c (lookup_opcode): Return value now indicates
1546 if an opcode has a short and a long form. Used for deciding
1547 to append a ".s" or ".l".
1548 (print_insn): Append a ".s" to an instruction if it is
1549 the short form and ".l" if it is a long form. Do not append
1550 anything if the instruction has only one possible size.
1552 * d30v-opc.c: Change mulx2h to require an even register.
1553 New form: SHORT_A2; a SHORT_A form that needs an even
1554 register as the first operand.
1556 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1557 instruction was not being disassembled if there were an odd
1558 number of instructions.
1560 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1563 start-sanitize-v850e
1564 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1566 * v850-dis.c (disassemble): Improved display of register lists.
1569 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1571 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1572 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1573 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1574 fandnot1s, fandnot2s.
1576 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1578 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1580 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1582 * cgen-asm.c (cgen_parse_address): New argument resultp.
1583 All callers updated.
1584 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1586 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1588 * mn10200-dis.c (disassemble): PC relative instructions are
1589 relative to the next instruction, not the current instruction.
1591 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1593 * v850-dis.c (disassemble): Only signed extend values that are not
1594 returned by extract functions.
1595 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1597 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1599 * v850-opc.c: Update comments. Remove use of
1600 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1602 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1604 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1606 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1608 * configure: Rebuilt with latest devo autoconf for NT support.
1610 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1612 * v850-dis.c (disassemble): Use curly brace syntax for register
1615 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1616 where r0 is being used as a destination register.
1618 start-sanitize-v850e
1619 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1621 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1624 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1626 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
1627 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
1628 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
1629 Add insns to access SGR and DBR.
1630 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
1632 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1634 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1636 start-sanitize-v850e
1637 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1639 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1640 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1643 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1645 * configure (cgen_files): Add support for v850e target.
1646 * configure.in (cgen_files): Add support for v850e target.
1648 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1650 * configure (cgen_files): Add support for v850ea target.
1651 * configure.in (cgen_files): Add support for v850ea target.
1654 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1656 * configure.in (bfd_arc_arch): Add.
1657 * configure: Rebuild.
1658 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1659 * Makefile.in: Rebuild.
1660 * arc-dis.c, arc-opc.c: New files.
1661 * disassemble.c (ARCH_all): Define ARCH_arc.
1662 (disassembler): Add ARC support.
1664 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1666 start-sanitize-v850e
1667 * v850-dis.c (disassemble): Add support for v850EA instructions.
1669 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1670 (v850_opcodes): Add v850EA instructions.
1672 * v850-dis.c (disassemble): Add support for v850E instructions.
1674 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1675 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1676 insert_spe, extract_spe): New Functions.
1677 (v850_opcodes): Add v850E instructions.
1680 * v850-opc.c: Reorganised and re-layed out to improve readability
1683 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1685 * configure: Rebuild with autoconf 2.12.1.
1687 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1689 * aclocal.m4, configure: Rebuild with new automake patches.
1691 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1693 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1694 * acinclude.m4: Just include acinclude.m4 from BFD.
1695 * aclocal.m4, configure: Rebuild.
1697 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1699 * Makefile.am: New file, based on old Makefile.in.
1700 * acconfig.h: New file.
1701 * acinclude.m4: New file.
1702 * stamp-h.in: New file.
1703 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1704 Removed shared library handling; now handled by libtool. Replace
1705 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1706 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1707 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1708 handling in AC_OUTPUT.
1709 * dep-in.sed: Change .o to .lo.
1710 * Makefile.in: Now built with automake.
1711 * aclocal.m4: Now built with aclocal.
1712 * config.in, configure: Rebuild.
1714 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1716 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1718 start-sanitize-r5900
1719 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
1721 * mips-opc.c: Fix coding of mtsa.
1724 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1726 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1728 * sparc-dis.c (sorted_opcodes): New static local.
1729 (struct opcode_hash): `opcode' is pointer to const element.
1730 (build_hash): First arg is now table of sorted pointers.
1731 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1732 (compare_opcodes): Update.
1734 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1736 * cgen-opc.c: #include <ctype.h>.
1737 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1738 Handle case insensitive hashing.
1739 (hash_keyword_value): Change type of `value' to unsigned int.
1741 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1743 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1744 precision FP, mark it as such. Likewise for double precision
1745 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1747 start-sanitize-r5900
1748 (mips_builtin_opcodes): Remove non-existant r5900 instructions
1751 start-sanitize-r5900
1752 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
1754 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
1755 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
1758 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1760 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1762 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1763 nesting depth when all the macros are expanded.
1765 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1767 * sparc-opc.c: The fcmp v9a instructions take an integer register
1768 as a destination, not a floating point register. From Christian
1769 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1771 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1773 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1774 syntax. From Roman Hodek
1775 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1777 * i386-dis.c (twobyte_has_modrm): Fix pand.
1779 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1781 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1783 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1785 * arm-dis.c: Add prototypes for arm_decode_shift and
1788 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
1790 * mips-opc.c: Add r3900 insns.
1792 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
1794 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
1795 print delay slot instructions on the same line. When using a PC
1796 relative load, add a comment with the value being loaded if it can
1799 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
1801 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
1802 to pushS/popS for segment regs and byte constant so that
1803 pushw/popw printed when in 16 bit data mode.
1805 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
1806 print cbtw, cwtd in 16 bit data mode.
1807 * i386-dis.c (putop): extra case W to support above.
1809 * i386-dis.c (print_insn_x86): print addr32 prefix when given
1810 address size prefix in 16 bit address mode.
1812 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
1814 * sh-dis.c: Reindent. Rename local variable fprintf to
1817 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
1819 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
1821 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
1823 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
1825 * mips16-opc.c (mip16_opcodes): same.
1827 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
1829 * m68k-opc.c (moveb): Change $d to %d.
1831 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
1833 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
1834 (twobyte_has_modrm): Likewise.
1836 (OP_MMX, OP_EM, OP_MS): New static functions.
1838 * i386-dis.c: Revert patch of April 4. The output now matches
1841 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
1843 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
1846 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
1848 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
1850 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
1852 * Makefile.in (install): Depend upon installdirs.
1853 (installdirs): New target.
1855 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
1857 From Thomas Graichen <graichen@rzpd.de>:
1858 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
1859 * configure: Rebuild.
1861 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
1863 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
1864 Delete string{,s}.h support.
1866 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
1868 * cgen-asm.c (cgen_parse_operand_fn): New global.
1869 (cgen_parse_{{,un}signed_integer,address}): Update call to
1870 cgen_parse_operand_fn.
1871 (cgen_init_parse_operand): New function.
1872 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
1873 from cgen_asm_init_parse.
1874 (m32r_cgen_assemble_insn): New operand `errmsg'.
1875 Delete call to as_bad, return error message to caller.
1876 (m32r_cgen_asm_hash_keywords): #if 0 out.
1878 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1880 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
1882 [case 'J']: Fix typo in register name.
1884 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
1886 * configure.in: Substitute SHLIB_LIBS.
1887 * configure: Rebuild.
1888 * Makefile.in (SHLIB_LIBS): New variable.
1889 ($(SHLIB)): Use $(SHLIB_LIBS).
1891 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
1893 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
1895 * cgen-opc.c (hash_keyword_name): Improve algorithm.
1897 * disassemble.c (disassembler): Handle m32r.
1899 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
1901 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
1902 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
1903 * Makefile.in (CFILES): Add them.
1904 (ALL_MACHINES): Add them.
1905 (dependencies): Regenerate.
1906 * configure.in (cgen_files): New variable.
1907 (bfd_m32r_arch): Add entry.
1908 * configure: Regenerate.
1910 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
1912 * configure.in: Correct file names for bfd_mn10[23]00_arch.
1913 * configure: Rebuild.
1915 * Makefile.in: Rebuild dependencies.
1917 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
1919 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
1922 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
1924 * Branched binutils 2.8.
1926 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
1928 * m10200-dis.c: Rename from mn10200-dis.c.
1929 * m10200-opc.c: Rename from mn10200-opc.c.
1930 * m10300-dis.c: Rename from mn10300-dis.c
1931 * m10300-opc.c: Rename from mn10300-opc.c.
1932 * Makefile.in: Update accordingly.
1934 * mips16-opc.c: Add mul and dmul macros.
1936 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
1938 * makefile.vms: Update CFLAGS, add clean target.
1940 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
1942 * mips-opc.c: Add "wait". From Ralf Baechle
1943 <ralf@gnu.ai.mit.edu>.
1945 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
1946 * configure, config.in: Rebuild.
1947 * sysdep.h: Include <stdlib.h> if it exists.
1948 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
1950 * Makefile.in: Rebuild dependencies.
1952 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
1954 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
1955 Andrew Bray <andy@madhouse.demon.co.uk>.
1957 * mips-opc.c: Add cast when setting mips_opcodes.
1959 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
1961 * v850-dis.c (disassemble): Fix sign extension problem.
1962 * v850-opc.c (extract_d*): Fix sign extension problems to make
1963 disassembly calculate branch offsets correctly.
1965 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
1967 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
1969 * mips-opc.c: Add dctr and dctw.
1972 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1974 * d30v-dis.c (print_insn): Change the way signed constants
1977 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
1979 * Makefile.in (BFD_H): New variable.
1980 (HFILES): New variable.
1981 (CFILES): Add all C files.
1982 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
1983 Delete old dependencies, and build new ones.
1984 * dep-in.sed: New file.
1986 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1988 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
1990 start-sanitize-coldfire
1991 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
1993 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
1996 end-sanitize-coldfire
1997 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
1999 * mn10200-opc.c: Change "trap" to "syscall".
2000 * mn10300-opc.c: Add new "syscall" instruction.
2002 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2004 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2005 mulul insns on the coldfire.
2007 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2009 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2010 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2011 (print_insn_little_arm): Likewise.
2013 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2015 Based on patches from H.J. Lu <hjl@lucon.org>:
2016 * i386-dis.c (fetch_data): Add prototype.
2017 * m68k-dis.c (fetch_data): Add prototype.
2018 (dummy_print_address): Add prototype. Make static.
2019 * ppc-opc.c (valid_bo): Add prototype.
2020 * sparc-dis.c (build_hash_table): Add prototype.
2021 (is_delayed_branch, compute_arch_mask): Add prototypes.
2022 (print_insn_sparc): Make several local variables const.
2023 (compare_opcodes): Change arguments to const PTR. Add prototype.
2024 * sparc-opc.c (arg): Change name field to be const.
2025 (lookup_name, lookup_value): Add prototypes. Change table and
2026 name parameters to be const.
2027 (sparc_encode_asi): Change name parameter to be const.
2028 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2029 (sparc_encode_sparclet_cpreg): Likewise.
2030 (sparc_decode_asi): Change return type to be const.
2031 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2032 (sparc_decode_sparclet_cpreg): Likewise.
2034 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2036 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2037 Solaris doesn't like the combined options, and the -f is
2039 (stamp-tshlink, install): Likewise.
2041 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2043 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2046 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2048 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2050 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2052 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2055 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2057 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2059 start-sanitize-tic80
2060 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2062 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2064 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2066 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2069 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2071 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2072 floatformat_to_double to make portable.
2073 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2076 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2078 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2079 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2081 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2083 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2084 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2086 start-sanitize-tic80
2087 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2089 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2090 (OFF_SL_BR_SCALED): ... to this, and added the flag
2091 TIC80_OPERAND_BASEREL to the flags word.
2092 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2096 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2098 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2099 Change mips_opcodes from const array to a pointer,
2100 and change bfd_mips_num_opcodes from const int to int,
2101 so that we can increase the size of the mips opcodes table
2104 start-sanitize-tic80
2105 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2107 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2108 store BITNUM values in the table in one's complement form
2109 to match behavior when assembler is given a raw numeric
2110 value for a BITNUM operand.
2111 * tic80-dis.c (print_operand_bitnum): Ditto.
2115 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2117 * d30v-opc.c: Removed references to FLAG_X.
2120 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2122 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2125 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2127 * Makefile.in: Added d30v object files.
2128 * configure: (bfd_d30v_arch) Rebuilt.
2129 * configure.in: (bfd_d30v_arch) Added new case.
2130 * d30v-dis.c: New file.
2131 * d30v-opc.c: New file.
2132 * disassemble.c (disassembler) Add entry for d30v.
2135 start-sanitize-tic80
2136 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2138 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2139 representations for the floating point BITNUM values.
2141 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2143 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2144 in the table in one's complement form, as they appear in the
2146 (tic80_symbol_to_value): Use macros to access predefined
2148 (tic80_value_to_symbol): Ditto.
2149 (tic80_next_predefined_symbol): New function.
2150 * tic80-dis.c (print_operand_bitnum): Remove code that did
2151 one's complement for BITNUM values.
2154 start-sanitize-r5900
2155 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
2157 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
2160 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2162 * makefile.vms: Remove 8 bit characters. Update to latest
2165 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2167 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2169 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2171 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2172 (IMM24_PCREL): Likewise.
2174 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2176 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2177 address for an extended PC relative instruction that is not a
2180 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2182 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2185 start-sanitize-tic80
2186 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2188 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2189 (tic80_opcodes): Sort entries so that long immediate forms
2190 come after short immediate forms, making it easier for
2191 assembler to select the right one for a given operand.
2194 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2196 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2198 (print_insn_mips16): Likewise.
2200 start-sanitize-r5900
2201 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
2203 * mips-opc.c: add r5900.
2206 start-sanitize-tic80
2207 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2209 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2210 a symbol class that restricts translation to just that
2211 class (general register, condition code, etc).
2213 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2215 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2216 and REG_DEST_E for register operands that have to be
2217 an even numbered register. Add REG_FPA for operands that
2218 are one of the floating point accumulator registers.
2219 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2220 (tic80_opcodes): Change entries that need even numbered
2221 register operands to use the new operand table entries.
2222 Add "or" entries that are identical to "or.tt" entries.
2225 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2227 * mips16-opc.c: Add new cases of exit instruction for
2229 * mips-dis.c (print_mips16_insn_arg): Display floating point
2230 registers in operands of exit instruction. Print `$' before
2231 register names in operands of entry and exit instructions.
2233 start-sanitize-tic80
2234 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2236 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2237 pairs for all predefined symbols recognized by the assembler.
2238 Also used by the disassembling routines.
2239 (tic80_symbol_to_value): New function.
2240 (tic80_value_to_symbol): New function.
2241 * tic80-dis.c (print_operand_control_register,
2242 print_operand_condition_code, print_operand_bitnum):
2243 Remove private tables and use tic80_value_to_symbol function.
2246 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2248 * d10v-dis.c (print_operand): Change address printing
2249 to correctly handle PC wrapping. Fixes PR11490.
2251 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2253 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2256 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2258 * mips-dis.c (print_insn_mips16): Set insn_info information.
2259 (print_mips16_insn_arg): Likewise.
2261 * mips-dis.c (print_insn_mips16): Better handling of an extend
2262 opcode followed by an instruction which can not be extended.
2264 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2266 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2267 coldfire moveb instruction to not allow an address register as
2268 destination. Although the documentation does not indicate that
2269 this is invalid, experiments uncovered unexpected behavior.
2270 Added a comment explaining the situation. Thanks to Andreas
2271 Schwab for pointing this out to me.
2273 start-sanitize-tic80
2274 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2276 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2277 entries are presorted so that entries with the same mnemonic are
2278 adjacent to each other in the table. Sort the entries for each
2279 instruction so that this is true.
2282 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2284 * m68k-dis.c: Include <libiberty.h>.
2285 (print_insn_m68k): Sort the opcode table on the most significant
2286 nibble of the opcode.
2288 start-sanitize-tic80
2289 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2291 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2292 "vsub", "vst", "xnor", and "xor" instructions.
2293 (V_a1): Renamed from V_a, msb of accumulator reg number.
2294 (V_a0): Add macro, lsb of accumulator reg number.
2296 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2298 * tic80-dis.c (print_insn_tic80): Broke excessively long
2299 function up into several smaller ones and arranged for
2300 the instruction printing function to be callable recursively
2301 to print vector instructions that have both a load and a
2302 math instruction packed into a single opcode.
2303 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2304 to explain why it comes after the other vector opcodes.
2307 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2309 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2310 move insns to handle immediate operands.
2312 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2314 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2315 fix operand mask in the "moveml" entries for the coldfire.
2317 start-sanitize-tic80
2318 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2320 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2321 New macros for building vector instruction opcodes.
2322 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2323 FMT_LI, which were unused. The field is now a flags field.
2324 Remove some opcodes that are possible, but illegal, such
2325 as long immediate instructions with doubles for immediate
2326 values. Add "vadd" and "vld" instructions.
2328 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2330 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2331 the order more logical. Move the shift alias instructions ("rotl",
2332 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2333 interspersed with the regular sr.x and sl.x instructions. Add
2334 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2335 "sub", "subu", "swcr", and "trap".
2337 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2339 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2340 (OFF_SL_PC): Renamed from OFF_SL.
2341 (OFF_SS_BR): New operand type for base relative operand.
2342 (OFF_SL_BR): New operand type for base relative operand.
2343 (REG_BASE): New operand type for base register operand.
2344 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2345 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2346 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2348 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2349 10 char field, padded with spaces on rhs, rather than a string
2350 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2351 than old TIC80_OPERAND_RELATIVE. Add support for new
2352 TIC80_OPERAND_BASEREL flag bit.
2354 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2356 * tic80-dis.c (print_insn_tic80): Print floating point operands
2358 * tic80-opc.c (SPFI): Add single precision floating point
2359 immediate operand type.
2360 (ROTATE): Add rotate operand type for shifts.
2361 (ENDMASK): Add for shifts.
2362 (n): Macro for the 'n' bit.
2363 (i): Macro for the 'i' bit.
2364 (PD): Macro for the 'PD' field.
2365 (P2): Macro for the 'P2' field.
2366 (P1): Macro for the 'P1' field.
2367 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2371 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2373 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2374 adding in current address for pc-relative operands.
2376 start-sanitize-tic80
2377 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2379 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2380 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2381 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2382 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2383 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2384 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2385 (REG_SCALED, LSI_SCALED): New operand types.
2386 (E): New macro for 'E' bit at bit 27.
2387 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2388 opcodes, including the various size flavors (b,h,w,d) for
2389 the direct load and store instructions.
2391 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2393 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2395 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2396 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2397 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2398 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2399 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2400 masks with "MASK_* & ~M_*" to get the M bit reset.
2401 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2403 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2405 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2406 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2407 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2409 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2410 CC, SICR, and LICR table entries.
2411 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2412 "bcnd", and "brcr" opcodes.
2415 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2417 * ppc-opc.c (powerpc_operands): Make comment match the
2418 actual fields (no shift field).
2419 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2420 start-sanitize-tic80
2421 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2422 partial implementation, work in progress.
2423 * tic80-opc.c (tic80_operands): Begin construction operands table.
2424 (tic80_opcodes): Continue populating opcodes table and start
2425 filling in the operand indices.
2426 (tic80_num_opcodes): Add this.
2429 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2431 * m68k-opc.c: Add #B case for moveq.
2433 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2435 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2436 before they are used.
2438 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2440 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2441 for "breakpoint" instruction.
2443 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2445 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2446 (dep): Use ALL_CFLAGS rather than CFLAGS.
2448 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2450 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2453 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2455 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2456 start-sanitize-tic80
2457 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2460 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2462 * mips16-opc.c: Add "abs".
2464 start-sanitize-tic80
2465 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2467 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2468 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2469 (disassembler): Add bfd_arch_tic80 support to set disassemble
2470 to print_insn_tic80.
2471 * tic80-dis.c (print_insn_tic80): Add stub.
2473 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2475 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2476 * configure: Regenerate with autoconf.
2477 * tic80-dis.c: Add file.
2478 * tic80-opc.c: Add file.
2481 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2483 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2485 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2487 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2488 (mn10200_opcodes): Use it for some logicals and btst insns.
2489 Add "break" and "trap" instructions.
2491 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2493 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2495 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2497 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2498 relative load or add now depends upon whether the instruction is
2501 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2503 * mn10200-dis.c: Finish writing disassembler.
2504 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2505 Fix mask for "jmp (an)".
2507 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2508 handle endianness issues for mn10300.
2510 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2512 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2514 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2515 instruction. Fix opcode field for "movb (imm24),dn".
2517 * mn10200-opc.c (mn10200_operands): Fix insertion position
2520 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2522 * mn10200-opc.c: Create mn10200 opcode table.
2523 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2524 but moving along nicely.
2526 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2528 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2530 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2532 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2533 specifiers for fmovem* instructions.
2535 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2537 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2539 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2541 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2544 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2546 * mn10300-opc.c: Add some comments explaining the various
2549 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2551 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2553 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2556 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2557 operand specifiers in fmovm* instructions.
2559 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2561 * ppc-opc.c (insert_li): Give an error if the offset has the two
2562 least significant bits set.
2564 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2566 * mips-dis.c (print_insn_mips16): Separate the instruction from
2567 the arguments with a tab, not a space.
2569 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2571 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2574 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2577 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2579 * configure: Rebuild with autoconf 2.12.
2581 Add support for mips16 (16 bit MIPS implementation):
2582 * mips16-opc.c: New file.
2583 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2584 (mips16_reg_names): New static array.
2585 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2586 after seeing a 16 bit symbol.
2587 (print_insn_little_mips): Likewise.
2588 (print_insn_mips16): New static function.
2589 (print_mips16_insn_arg): New static function.
2590 * mips-opc.c: Add jalx instruction.
2591 * Makefile.in (mips16-opc.o): New target.
2592 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2593 * configure: Rebuild.
2595 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2597 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2598 operand specifiers in *save, *restore and movem* instructions.
2600 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2603 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2604 register operands for immediate arithmetic, not, neg, negx, and
2605 set according to condition instructions.
2607 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2608 specifier of the effective-address operand in immediate forms of
2609 arithmetic instructions. The specifier for the immediate operand
2610 notes how and where the constant will be stored.
2612 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2614 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2617 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2620 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2622 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2624 * mn10300-dis.c (disassemble): Handle register lists.
2626 * mn10300-opc.c: Fix handling of register list operand for
2627 "call", "ret", and "rets" instructions.
2629 * mn10300-dis.c (disassemble): Print PC-relative and memory
2630 addresses symbolically if possible.
2631 * mn10300-opc.c: Distinguish between absolute memory addresses,
2632 pc-relative offsets & random immediates.
2634 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2636 (disassemble): Handle SPLIT and EXTENDED operands.
2638 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2640 * mn10300-dis.c: Rough cut at printing some operands.
2642 * mn10300-dis.c: Start working on disassembler support.
2643 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2645 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2647 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2649 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2651 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2653 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2655 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2656 register argument is calls and jmp instructions.
2658 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2660 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2661 getx operand. Fix opcode for mulqu imm,dn.
2663 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2665 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2666 in MN10300_OPERAND_SPLIT operands for how many bits
2667 appear in the basic insn word. Add IMM32_HIGH24,
2668 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2669 (mn10300_opcodes): Use new operands as needed.
2671 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2672 for bset, bclr, btst instructions.
2673 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2675 * mn10300-opc.c (mn10300_operands): Remove many redundant
2676 operands. Update opcode table as appropriate.
2677 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2678 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2680 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2682 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2683 operands (for indexed load/stores). Fix bitpos for DI
2684 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2685 few instructions that insert immediates/displacements in the
2686 middle of the instruction. Add IMM8E for 8 bit immediate in
2687 the extended part of an instruction.
2688 (mn10300_operands): Use new opcodes as appropriate.
2690 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2692 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2693 sequential so the assembler never parallelizes it with
2696 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2698 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2699 a data/address register that appears in register field 0
2700 and register field 1.
2701 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2703 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2705 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2706 standard disassembly.
2708 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2709 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2710 Recategorize PALcode instructions.
2712 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2714 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2716 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2718 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2719 there are no operand types.
2721 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2723 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2725 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2727 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2729 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2731 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2733 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2734 and sst.w instructions.
2736 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2739 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2741 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2744 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2746 * ppc-opc.c (PPCPWR2): Define.
2747 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2750 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2752 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2753 field for movhu instruction.
2755 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2756 cast value to "long" not "signed long" to keep hpux10
2759 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2761 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2764 * mn10300-opc.c (FMT*): Remove definitions.
2766 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2767 for shift-by-register opcodes.
2769 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2770 into [AD][MN][01] for encoding the position of the register
2773 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2775 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2776 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2778 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2780 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2781 Fix various typos. Add "PAREN" operand.
2782 (MEM, MEM2): Define.
2783 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2784 operands. Fix several typos.
2786 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2789 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2791 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2792 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2794 (mn10300_opcodes): Break opcode format out into its own field.
2795 Update many operand fields to deal with signed vs unsigned
2796 issues. Fix one or two typos in the "mov" instruction
2797 opcode, mask and/or operand fields.
2799 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2801 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2802 m68851 wasn't reset.
2804 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2806 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2807 all opcodes. Very rough cut at operands for all opcodes.
2809 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2812 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2814 * mn10200-opc.c, mn10300-opc.c: New files.
2815 * mn10200-dis.c, mn10300-dis.c: New files.
2816 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2817 * disassemble.c: Break mn10x00 support into 10200 and 10300
2819 * configure.in: Likewise.
2820 * configure: Rebuilt.
2822 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2824 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2826 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
2828 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2830 * disassemble (ARCH_mn10x00): Define.
2831 (disassembler): Handle bfd_arch_mn10x00.
2832 * configure.in: Recognize bfd_mn10x00_arch.
2833 * configure: Rebuilt.
2835 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
2837 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
2838 accordingly. Don't declare functions using op_rtn.
2840 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
2842 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
2843 params to be more standard.
2844 * (disassemble): Print absolute addresses and symbolic names for
2845 branch and jump targets.
2846 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
2848 * (v850_opcodes): Add breakpoint insn.
2850 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
2852 * m68k-opc.c: Move the fmovemx data register cases before the
2853 other cases, so that they get recognized before the data register
2854 does gets treated as a degenerate register list.
2856 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
2858 * mips-opc.c: Add a case for "div" and "divu" with two registers
2859 and a destination of $0.
2861 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
2863 * mips-dis.c (print_insn_arg): Add prototype.
2864 (_print_insn_mips): Ditto.
2866 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
2868 * mips-dis.c (print_insn_arg): Print condition code registers as
2871 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
2873 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
2875 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
2877 * v850-dis.c (disassemble): Make static. Provide prototype.
2879 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
2881 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
2884 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
2886 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
2887 ']' characters into the output stream.
2888 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
2889 Add "memop" field to all opcodes (for the disassembler).
2890 Reorder opcodes so that "nop" comes before "mov" and "jr"
2891 comes before "jarl".
2893 * v850-dis.c (print_insn_v850): Fix typo in last change.
2895 * v850-dis.c (print_insn_v850): Properly handle disassembling
2896 a two byte insn at the end of a memory region when the memory
2897 region's size is only two byte aligned.
2899 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
2901 * v850-dis.c (v850_reg_names): Define.
2902 (v850_sreg_names, v850_cc_names): Likewise.
2903 (disassemble): Very rough cut at printing operands (unformatted).
2905 * v850-opc.c (BOP_MASK): Fix.
2906 (v850_opcodes): Fix mask for jarl and jr.
2908 * v850-dis.c: New file. Skeleton for disassembler support.
2909 * Makefile.in Remove v850 references, they're not needed here.
2910 * configure.in: Add v850-dis.o when building v850 toolchains.
2911 * configure: Rebuilt.
2912 * disassemble.c (disassembler): Call v850 disassembler.
2914 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
2915 (insert_d8_6, extract_d8_6): New functions.
2916 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
2917 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
2919 (IF4A, IF4B): Use "D7" instead of "D7S".
2920 (IF4C, IF4D): Use "D8_7" instead of "D8".
2921 (IF4E, IF4F): New. Use "D8_6".
2922 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
2923 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
2925 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
2926 (v850_operands): Change D16 to D16_15, use special insert/extract
2927 routines. New new D16 that uses the generic insert/extract code.
2928 (IF7A, IF7B): Use D16_15.
2929 (IF7C, IF7D): New. Use D16.
2930 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
2932 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
2933 message. Issue an error if the branch offset is odd.
2935 * v850-opc.c: Add notes about needing special insert/extract
2936 for all the load/store insns, except "ld.b" and "st.b".
2938 * v850-opc.c (insert_d22, extract_d22): New functions.
2939 (v850_operands): Use insert_d22 and extract_d22 for
2941 (insert_d9): Fix range check.
2943 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2945 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
2946 and set bits field to D9 and D22 operands.
2948 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
2950 * v850-opc.c (v850_operands): Define SR2 operand.
2951 (v850_opcodes): "ldsr" uses R1,SR2.
2953 * v850-opc.c (v850_opcodes): Fix opcode specs for
2954 sld.w, sst.b, sst.h, sst.w, and nop.
2956 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
2958 * v850-opc.c (v850_opcodes): Add null opcode to mark the
2959 end of the opcode table.
2961 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2963 * d10v-opc.c (pre_defined_registers): Added register pairs,
2964 "r0-r1", "r2-r3", etc.
2966 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
2968 * v850-opc.c (v850_operands): Make I16 be a signed operand.
2969 Create I16U for an unsigned 16bit mmediate operand.
2970 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
2972 * v850-opc.c (v850_operands): Define EP operand.
2973 (IF4A, IF4B, IF4C, IF4D): Use EP.
2975 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
2976 with immediate operand, "movhi". Tweak "ldsr".
2978 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
2979 correct. Get sld.[bhw] and sst.[bhw] closer.
2981 * v850-opc.c (v850_operands): "not" is a two byte insn
2983 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
2985 * v850-opc.c (v850_operands): D16 inserts at offset 16!
2987 * v850-opc.c (two): Get order of words correct.
2989 * v850-opc.c (v850_operands): I16 inserts at offset 16!
2991 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
2992 register source and destination operands.
2993 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
2995 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
2996 same thinko in "trap" opcode.
2998 * v850-opc.c (v850_opcodes): Add initializer for size field
3001 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3002 Add D8 for 8-bit unsigned field in short load/store insns.
3003 (IF4A, IF4D): These both need two registers.
3004 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3005 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3006 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3007 for "ldsr" and "stsr".
3008 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3011 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3012 short store word (sst.w).
3014 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3016 * v850-opc.c (v850_operands): Added insert and extract fields,
3017 pointers to functions that handle unusual operand encodings.
3019 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3021 * v850-opc.c (v850_opcodes): Enable "trap".
3023 * v850-opc.c (v850_opcodes): Fix order of displacement
3024 and register for "set1", "clr1", "not1", and "tst1".
3026 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3028 * v850-opc.c (v850_operands): Add "B3" support.
3029 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3032 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3034 * v850-opc.c: Close unterminated comment.
3036 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3038 * v850-opc.c (v850_operands): Add flags field.
3039 (v850_opcodes): add move opcodes.
3041 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3043 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3044 * configure: (bfd_v850v_arch) Add new case.
3045 * configure.in: (bfd_v850_arch) Add new case.
3046 * v850-opc.c: New file.
3048 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3050 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3052 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3054 * d10v-opc.c: Add additional information to the opcode
3055 table to help determinine which instructions can be done
3058 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3060 * mpw-make.sed: Update editing of include pathnames to be
3063 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3065 * arm-opc.h: Added "bx" instruction definition.
3067 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3069 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3071 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3073 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3075 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3077 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3079 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3081 * makefile.vms: Update for alpha-opc changes.
3083 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3085 * i386-dis.c (print_insn_i386): Actually return the correct value.
3086 (ONE, OP_ONE): #ifdef out; not used.
3088 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3090 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3091 Changed subi operand type to treat 0 as 16.
3093 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3095 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3098 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3100 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3101 memory transfer instructions. Add new format string entries %h and %s.
3102 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3105 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3107 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3108 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3110 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3112 * alpha-dis.c (print_insn_alpha_osf): Remove.
3113 (print_insn_alpha_vms): Remove.
3114 (print_insn_alpha): Make globally visible. Chose the register
3115 names based on info->flavour.
3116 * disassemble.c: Always return print_insn_alpha for the alpha.
3118 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3120 * d10v-dis.c (dis_long): Handle unknown opcodes.
3122 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3124 * d10v-opc.c: Changes to support signed and unsigned numbers.
3125 All instructions with the same name that have long and short forms
3126 now end in ".l" or ".s". Divs added.
3127 * d10v-dis.c: Changes to support signed and unsigned numbers.
3129 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3131 * d10v-dis.c: Change all functions to use info->print_address_func.
3133 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3135 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3136 move ccr/sr insns more strict so that the disassembler only
3137 selects them when the addressing mode is data register.
3139 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3140 * d10v-opc.c (pre_defined_registers): Declare.
3141 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3142 to pick a better name for the registers.
3144 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3146 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3147 operands for fexpand and fpmerge. From Christian Kuehnke
3148 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3150 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3152 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3153 print routine. Take new regnames and cpumask arguments.
3154 Kill the environment variable nonsense.
3155 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3156 (print_insn_alpha_vms): New function. Do VMS style regnames.
3157 * disassemble.c (disassembler): Test bfd flavour to pick
3158 between OSF and VMS routines. Default to OSF.
3160 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3162 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3163 * configure: Rebuild.
3164 * Makefile.in (install): Use @INSTALL_SHLIB@.
3166 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3168 * configure: (bfd_d10v_arch) Add new case.
3169 * configure.in: (bfd_d10v_arch) Add new case.
3170 * d10v-dis.c: New file.
3171 * d10v-opc.c: New file.
3172 * disassemble.c (disassembler) Add entry for d10v.
3174 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3176 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3177 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3179 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3181 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3182 distinguish between variants of the instruction set.
3183 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3184 distinguish between variants of the instruction set.
3186 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3188 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3189 the 8086 instruction set.
3190 * i386-dis.c: General cleanups. Make most things static. Add
3191 prototypes. Get rid of static variables aflags and dflags. Pass
3192 them as args (to almost everything).
3194 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3196 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3198 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3200 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3201 if the next arg is marked with SRC_IN_DST. Gross.
3203 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3204 we're looking for and find EXR.
3206 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3207 if we're looking for KBIT and we don't find it.
3209 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3212 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3213 3bit immediate operands.
3215 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3217 * Released binutils 2.7.
3219 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3220 <kkaempf@progis.ac-net.de>.
3222 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3224 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3226 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3228 * sparc-dis.c (print_insn_sparclite): New routine to print
3229 sparclite instructions.
3231 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3233 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3235 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3237 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3238 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3239 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3241 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3243 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3244 Use autoconf-set values.
3245 (docdir, oldincludedir): Removed.
3246 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3248 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3250 * alpha-opc.c: New file.
3251 * alpha-opc.h: Remove.
3252 * alpha-dis.c: Complete rewrite to use new opcode table.
3253 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3254 * configure: Rebuild with autoconf 2.10.
3255 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3256 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3258 (alpha-opc.o): New target.
3260 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3262 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3263 Set imm_added_to_rs1 even if the source and destination register
3266 * sparc-opc.c: Add some two operand forms of the wr instruction.
3268 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3270 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3273 * disassemble.c (disassembler): Handle H8/S.
3274 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3276 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3278 * sparc-opc.c: Add beq/teq as aliases for be/te.
3280 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3281 <sergei@msil.sps.mot.com>.
3283 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3285 * makefile.vms: New file.
3287 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3289 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3291 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3294 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3296 * i386-dis.c (OP_OFF): Call append_prefix.
3298 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3300 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3301 unsigned long to silence a warning from the Solaris PowerPC
3304 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3306 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3308 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3310 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3312 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3313 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3314 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3315 cpush, cpusha, cpull sparclet insns.
3317 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3319 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3321 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3323 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3324 Set F_FLOAT on other floating point instructions.
3326 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3328 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3330 (powerpc_opcodes): Add 860/821 specific SPRs.
3332 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3334 * configure.in: Permit --enable-shared to specify a list of
3335 directories. Set and substitute BFD_PICLIST.
3336 * configure: Rebuild.
3337 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3338 uses. Set to @BFD_PICLIST@.
3340 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3342 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3343 not "abs", which may be needed for the absolute in something
3344 like btst #0,@10:8. Print L_3 immediates separately from other
3345 immediates. Change ABSMOV reference to ABS8MEM.
3347 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3349 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3350 (current_arch_mask): New static global.
3351 (compute_arch_mask): New static function.
3352 (print_insn_sparc): Delete sparc_v9_p. New static local
3353 current_mach. Resort opcode table if current_mach changes.
3354 Generalize "insn not supported" test.
3355 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3356 Delete test for v9/!v9.
3357 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3359 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3360 (brfcx): Renamed to FBRX.
3361 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3362 coprocessor mnemonics are not supported on the sparclet).
3363 (condf): Renamed to CONDF.
3364 (SLCBCC2): Delete F_ALIAS flag.
3366 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3368 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3369 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3371 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3373 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3374 that the shared library version number is set correctly.
3376 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3378 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3379 Miles Bader <miles@gnu.ai.mit.edu>.
3380 * configure: Rebuild.
3382 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3384 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3387 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3389 * configure: Rebuild with autoconf 2.8.
3391 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3393 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3394 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3396 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3398 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3399 since they appear as targets in Makefile.in.
3400 * configure: Rebuild.
3402 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3404 * mpw-make.sed: Edit out shared library support bits.
3406 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3408 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3409 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3410 (sparc_opcodes): Add sparclet insns.
3411 (sparclet_cpreg_table): New static local.
3412 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3413 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3415 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3417 * i386-dis.c (index16): New static variable.
3418 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3420 (OP_indirE): Return result of OP_E.
3421 (OP_E): Check for 16 bit addressing mode, and disassemble
3422 correctly. Optimised 32 bit case a little. Don't print
3423 "(base,index,scale)" when sib specifies only an offset.
3425 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3427 * configure.in: Set and substitute SHLIB_DEP.
3428 * configure: Rebuild.
3429 * Makefile.in (SHLIB_DEP): New variable.
3430 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3431 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3432 COMMON_SHLIB, add them to piclist with appropriate modifications.
3433 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3434 here: just use piclist.
3436 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3438 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3439 (print_insn_sparc): Rewrite v9/not-v9 tests.
3440 (compare_opcodes): Likewise.
3441 * sparc-opc.c (MASK_<ARCH>): Define.
3442 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3443 (sparclet,v6notv9): Define.
3444 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3445 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3447 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3449 * configure.in: Call AC_PROG_CC before configure.host.
3450 * configure: Rebuild.
3452 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3454 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3456 * i386-dis.c (onebyte_has_modrm): New static array.
3457 (twobyte_has_modrm): New static array.
3458 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3460 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3462 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3465 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3467 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3470 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3472 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3473 m68010up, not just m68020up | cpu32.
3475 * Makefile.in (SONAME): New variable.
3476 ($(SHLINK)): Make a link to the transformed name, as well.
3477 (stamp-tshlink): New target.
3478 (install): Skip stamp-tshlink during install.
3480 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3482 * configure.in: Call AC_ARG_PROGRAM.
3483 * configure: Rebuild.
3484 * Makefile.in (program_transform_name): New variable.
3485 (install): Transform library name before installing it.
3487 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3489 * i960-dis.c (mem): Add HX dcinva instruction.
3491 Support for building as a shared library, based on patches from
3492 Alan Modra <alan@spri.levels.unisa.edu.au>:
3493 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3494 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3495 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3496 * configure: Rebuild.
3497 * Makefile.in (ALLLIBS): New variable.
3498 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3499 (COMMON_SHLIB, SHLINK): New variables.
3500 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3501 (STAGESTUFF): Remove variable.
3502 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3503 (stamp-piclist, piclist): New targets.
3504 ($(SHLIB), $(SHLINK)): New targets.
3505 ($(OFILES)): Depend upon stamp-picdir.
3506 (disassemble.o): Build twice if PICFLAG is set.
3507 (MOSTLYCLEAN): Add pic/*.o.
3508 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3509 (distclean): Remove pic and stamp-picdir.
3510 (install): Install shared libraries.
3511 (stamp-picdir): New target.
3513 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3515 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3516 Print unknown instruction as "unknown", rather than in hex.
3518 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3520 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3522 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3524 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3526 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3528 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3529 when necessary. From Ulrich Drepper
3530 <drepper@myware.rz.uni-karlsruhe.de>.
3532 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3534 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3535 sparc_num_opcodes. Update architecture enum values.
3536 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3537 (sparc_opcode_lookup_arch): New function.
3538 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3539 (sparc_opcodes): Add v9a shutdown insn.
3541 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3543 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3544 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3546 (print_insn_sparc64): Deleted.
3547 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3550 * sparc-opc.c (architecture_pname): Add v9a.
3552 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3554 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3555 incorrectly defined as 0x16 when it should be 0x15.
3556 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3557 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3558 excb (exception barrier) which is defined in the Alpha
3559 Architecture Handbook version 2.
3560 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3561 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3562 disassembled as or, for example.
3564 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3566 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3567 (_print_insn_mips): Change i from int to unsigned int.
3569 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3571 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3572 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3574 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3576 * i386-dis.c: Added Pentium Pro instructions.
3578 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3580 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3583 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3585 * sh-opc.h (sh_nibble_type): Added REG_B.
3586 (sh_arg_type): Added A_REG_B.
3587 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3589 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3591 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3593 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3595 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3597 * Makefile.in (distclean): Remove stamp-h. From Ronald
3598 F. Guilmette <rfg@monkeys.com>.
3600 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3602 From David Mosberger-Tang <davidm@azstarnet.com>:
3603 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3606 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3608 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3609 (sh_table): Added many SH3 opcodes.
3610 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3612 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3614 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3615 (subco,subco.): Mark this PPC, not PPCCOM.
3617 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3619 * configure: Rebuild with autoconf 2.7.
3621 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3623 * configure: Rebuild with autoconf 2.6.
3625 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3627 * configure.in: Sort list of architectures. Accept but do nothing
3628 for alliant, convex, pyramid, romp, and tahoe.
3630 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3632 * a29k-dis.c (print_special): Change num to unsigned int.
3634 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3636 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3639 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3641 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3642 * configure: Rebuilt.
3644 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3646 * configure.in: Add case for bfd_i860_arch.
3647 * configure: Rebuild.
3649 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3651 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3652 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3653 (NEXTDOUBLE): Likewise.
3654 (print_insn_m68k): Don't match fmoveml if there is more than one
3655 register in the list.
3656 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3658 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3660 * m68k-opc.c: Use #W rather than #w.
3661 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3663 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3665 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3666 and likewise for all the dbxx opcodes.
3668 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3670 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3672 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3674 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3675 the VR4100 specific instructions to the mips_opcodes structure.
3677 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3679 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3680 ugly Metrowerks bug in CW6, is fixed in CW7.
3682 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3684 * ppc-opc.c (whole file): Add flags for common/any support.
3686 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3688 * Makefile.in (BISON): Remove macro.
3689 (FLAGS_TO_PASS): Remove BISON.
3691 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3693 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3695 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3696 instructions that take no args by looking at the match mask.
3697 (print_insn_arg): Always print "%" before register names.
3698 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3699 [case '_']: Don't print "@#" before address.
3700 [case 'J']: Use "%s" as format string, not register name.
3701 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3703 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3705 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3708 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3710 From David Mosberger-Tang <davidm@azstarnet.com>
3712 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3713 (alpha_insn_set): added definitions for VAX floating point
3714 instructions (Unix compilers don't generate these, but handcoded
3715 assembly might still use them).
3717 * alpha-dis.c (print_insn_alpha): added support for disassembling
3718 the miscellaneous instructions in the Alpha instruction set.
3720 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3722 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3723 no longer create sysdep.h, sed ppc-opc.c to work around a
3724 serious Metrowerks C bug.
3725 * mpw-make.in: Remove.
3726 * mpw-make.sed: New file, used by mpw-configure to edit
3727 Makefile.in into an MPW makefile.
3729 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3731 * Makefile.in (maintainer-clean): New synonym for realclean.
3733 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3735 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3736 which use '0', '1', and '2' instead. Specify the proper size for
3737 a pmove immediate operand. Correct the pmovefd patterns to be
3738 moves to a register, not from a register.
3739 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3741 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3743 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3744 %psr, %wim, %tbr as F_NOTV9.
3746 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3748 * Makefile.in (Makefile): Just rebuild Makefile when running
3750 (config.h, stamp-h): New targets.
3751 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3752 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3753 rebuilding config.h.
3754 * configure: Rebuild.
3756 * mips-opc.c: Change unaligned loads and stores with "t,A"
3757 operands to use "t,A(b)".
3759 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3761 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3763 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3765 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3766 until 3 instead of until 2.
3768 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3770 * Makefile.in (ALL_CFLAGS): Define.
3771 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3772 (MOSTLYCLEAN): Add config.log.
3773 (distclean): Don't remove config.log.
3774 * configure.in: Substitute HDEFINES.
3775 * configure: Rebuild.
3777 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3779 * sh-opc.h (sh_arg_type): Add F_FR0.
3780 (sh_table, case fmac): Add F_FR0 as first argument.
3782 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3784 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3786 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3788 * sparc-dis.c: Remove all references to NO_V9.
3790 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3792 * aclocal.m4: Just include ../bfd/aclocal.m4.
3793 * configure: Rebuild.
3795 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3797 * sparc-dis.c (X_DISP19): Define.
3798 (print_insn, case 'G'): Use it.
3799 (print_insn, case 'L'): Sign extend displacement.
3801 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3803 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3804 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3805 host_makefile_frag or frags.
3806 * aclocal.m4: New file.
3807 * configure: Rebuild.
3808 * Makefile.in (INSTALL): Set to @INSTALL@.
3809 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3810 (INSTALL_DATA): Set to @INSTALL_DATA@.
3812 (AR_FLAGS): Set to rc rather than qc.
3813 (CC): Define as @CC@.
3814 (CFLAGS): Set to @CFLAGS@.
3815 (@host_makefile_frag@): Remove.
3816 (config.status): Remove dependency upon @frags@.
3818 * configure.in: ../bfd/config.bfd now just sets shell variables.
3819 Use them rather than looking through target Makefile fragments.
3820 * configure: Rebuild.
3822 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3824 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3826 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
3828 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3829 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3832 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3833 (lookup_{name,value}): New functions.
3834 (prefetch_table): New static local.
3835 (sparc_{encode,decode}_prefetch): New functions.
3836 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3838 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3840 * sh-opc.h: Add blank lines to improve readabililty of sh3e
3843 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3845 * sh-dis.c: Correct comment on first line of file.
3847 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
3849 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
3851 * sparc-opc.c (asi, membar): New static locals.
3852 (sparc_{encode,decode}_{asi,membar}): New functions.
3853 (sparc_opcodes, membar insn): Fix.
3854 * sparc-dis.c (print_insn): Call sparc_decode_asi.
3855 Support decoding of membar masks.
3858 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
3860 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
3862 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
3864 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
3865 and likewise for the other branches. Add bhs as an alias for bcc,
3866 and likewise for the size variants. Add dbhs as an alias for
3869 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
3871 * sh-opc.h (FP sts instructions): Update to match reality.
3873 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
3875 * m68k-dis.c: (fpcr_names): Add % before all register names.
3876 (reg_names): Likewise.
3877 (print_insn_arg): Don't explicitly print % before register names.
3878 Add % before register names in static array names. In case 'r',
3879 print data registers as `@(Dn)', not `Dn@'. When printing a
3880 memory address, don't print @# before it.
3881 (print_indexed): Change base_disp and outer_disp from int to
3882 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
3883 syntax. Sign extend 8 byte displacement correctly.
3884 (print_base): Print using MIT syntax. Print zpc when appropriate.
3885 Change parameter disp from int to bfd_vma.
3887 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
3890 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
3892 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
3893 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
3894 * sh-opc.h (sh_arg_type): Add new operand types.
3895 (sh_table): Add new opcodes from SH3E Floating Point ISA.
3897 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3899 * Makefile.in (distclean): Remove generated file config.h.
3901 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3903 * Makefile.in (distclean): Remove generated file config.h.
3905 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
3907 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
3909 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
3911 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
3912 rather than numopcodes. Use m68k_opcodes rather than removed
3913 opcode function. Don't check F_ALIAS.
3914 (print_insn_arg): Change first parameter to be const char *.
3915 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
3916 (m68k-opc.o): New target.
3917 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
3918 * configure: Rebuild.
3920 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
3922 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
3923 (opcode_bits, opcode_hash_table): New variables.
3924 (opcodes_initialized): Renamed from opcodes_sorted.
3925 (build_hash_table): New function.
3926 (is_delayed_branch): Use hash table.
3927 (print_insn): Renamed from print_insn_sparc, made static.
3928 Build and use hash table. If !sparc64, ignore sparc64 insns,
3929 and vice-versa if sparc64.
3930 (print_insn_sparc, print_insn_sparc64): New functions.
3931 (compare_opcodes): Move sparc64 opcodes to end.
3932 Print commutative insns with constant second.
3933 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
3935 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
3937 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
3938 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
3939 avoids printing a delay slot in a delay slot.
3940 * sh-opc.h (sh_table): Fully bracket last entry.
3942 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
3944 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
3946 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
3948 * configure.in: Get host_makefile_frag from ${srcdir}.
3950 * configure.in: Autoconfiscated. Check for string[s].h. Create
3951 config.h from config.in. Don't set up sysdep.h link.
3952 * sysdep.h: New file.
3953 * configure, config.in: New files, generated from configure.in.
3954 * Makefile.in: Updated to be processed autoconf-style.
3955 (distclean): Keep sysdep.h. Remove config.log and config.cache.
3956 (Makefile): Depend on config.status.
3957 (config.status): New rule.
3958 * configure.bat: Update Makefile substitutions.
3960 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
3962 * mips-opc.c (L1): Define.
3963 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
3964 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
3967 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
3969 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
3970 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
3971 have multiple add units but only a single logical unit.
3973 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
3974 shifted by 18, without any insertion or extraction function.
3975 (insert_cr, extract_cr): Remove.
3977 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3979 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
3982 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
3984 * mpw-config.in: Add sh and i386 configs, remove sparc config.
3985 * sh-opc.h: Add copyright.
3987 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
3989 * Makefile.in (crunch-m68k): Delete extra target accidentally
3990 checked in a while ago.
3992 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3994 * sh-opc.h (sh_table): Add SH3 support.
3996 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
3998 * sh-opc.h: Added bsrf and braf.
4000 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4002 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4003 bogus [ls]fm{ea,fd} patterns.
4005 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4006 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4007 initialize it from memory. Make function static.
4008 (print_insn_{big,little}_arm): New functions.
4009 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4010 the correct endianness.
4012 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4014 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4017 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4019 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4020 17th, so that it builds again using GCC as the compiler.
4022 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4024 * mips-dis.c (print_insn_little_mips): Cast return value from
4025 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4026 expects an unsigned long, and that might be fewer words of
4027 argument storage (e.g., if bfd_vma is long long on a 32-bit
4029 (print_insn_big_mips): Likewise with bfd_getb32 value.
4030 (_print_insn_mips): Now static.
4032 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4034 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4035 gcc memory hog problem with initializer is fixed.
4037 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4039 Merge in support for Mac MPW as a host.
4040 (Old change descriptions retained for informational value.)
4042 * mpw-config.in (archname): Compute from the config.
4043 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4045 * mpw-config.in (target_arch): Compute from canonical target.
4046 (m68k, mips, powerpc, sparc): Add architectures.
4047 * mpw-make.in (disassemble.c.o): Add.
4048 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4050 * mpw-config.in (BFD_MACHINES): Set to a default value.
4051 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4053 * mpw-make.in (CSEARCH): Add extra-include to search path.
4055 * mpw-config.in (varargs.h): Don't create.
4056 (sysdep.h): Create using forward-include.
4057 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4059 * mpw-config.in: New file, MPW version of configure.in.
4060 * mpw-make.in: New file, MPW version of Makefile.in.
4062 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4064 * alpha-dis.c (print_insn_alpha): Put empty statement after
4067 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4069 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4070 (low_sign_extend): Likewise.
4071 (get_field): Delete unused function.
4072 (set_field, deposit_14, deposit_21): Likewise.
4074 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4076 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4079 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4081 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4083 * alpha-opc.h (OSF_ASMCODE): define
4084 print pal-code names as defined in App C of the
4085 Alpha Architecture Reference Manual
4087 * alpha-dis.c: cleaned up output
4088 print stylized code forms as defined in App A.4.3 of the
4089 Alpha Architecture Reference Manual
4091 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4093 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4095 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4098 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4100 * m68k-dis.c (opcode): New function. Returns address of opcode
4101 table entry given index, even if the opcode table was split to
4102 work around gcc bugs.
4103 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4105 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4106 (reg_names): Now const.
4107 (print_insn_arg): Arrays cacheFieldName and names now const.
4108 (print_indexed): Array scales now const.
4110 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4112 * ppc-opc.c: Sort recently added instructions by minor opcode
4113 number within major opcode number.
4115 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4117 * hppa-dis.c: Include libhppa.h.
4119 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4121 * mips-opc.c: Change dli to use M_DLI, and add dla.
4123 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4125 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4127 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4129 * mips-opc.c: Add r4650 mul instruction.
4131 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4133 * mips-opc.c: Add uld and usd macros for unaligned double load and
4136 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4138 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4139 mfdcr, mtdcr, icbt, iccci.
4141 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4143 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4144 signed char fields to shorts, more portable.
4146 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4148 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4149 char fields as signed chars, since they may have negative values.
4151 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4153 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4154 (mycroft@netbsd.org).
4156 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4158 From "Logg, Ed" <elogg@ea.com>:
4159 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4160 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4163 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4165 * ppc-opc.c: Changes based on patch from David Edelsohn
4166 <edelsohn@mhpcc.edu>.
4167 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4170 (insert_tbr): New static function.
4171 (extract_tbr): New static function.
4172 (XFXFXM_MASK, XFXM): Define.
4173 (XSPRBAT_MASK, XSPRG_MASK): Define.
4174 (powerpc_opcodes): Add instructions to access special registers by
4175 name. Add mtcr and mftbu.
4177 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4179 * mips-opc.c (P3): Define.
4180 (mips_opcodes): Add mad and madu.
4182 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4184 * configure.in: Add W65 support.
4185 * disassemble.c: Likewise.
4186 * w65-opc.h, w65-dis.c: New files.
4188 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4190 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4193 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4195 * mips-opc.c: Add dli as a synonym for li.
4197 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4199 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4200 print something for reserved opcode values, even if it won't
4203 * mips-dis.c (_print_insn_mips): When initializing, shift right
4204 and mask, to avoid sign extension problems on the Alpha.
4206 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4209 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4211 * sh-opc.h (mov.l gbr): Get direction right.
4212 * sh-dis.c (print_insn_shx): New function.
4213 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4214 print opcodes with right byte order.
4216 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4218 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4219 to avoid conflicts with getopt.
4221 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4223 * hppa-dis.c (print_insn_hppa): Read the instruction using
4224 bfd_getb32, so that it works on a little endian or 64 bit host.
4225 Remove unused local variable op.
4227 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4229 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4230 addu does not work correctly if -mips3.
4232 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4234 * a29k-dis.c (print_special): Add special register names defined
4235 on 29030, 29040 and 29050.
4236 (print_insn): Handle new operand type 'I'.
4238 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4240 * Makefile.in (INSTALL): Use top level install.sh script.
4242 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4244 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4245 that it works on a little endian host.
4247 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4249 * configure.in: Use ${config_shell} when running config.bfd.
4251 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4253 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4255 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4257 * a29k-dis.c (print_insn): Print the opcode.
4259 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4261 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4263 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4265 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4267 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4269 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4270 which store a value into memory.
4272 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4274 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4275 * arm-dis.c, arm-opc.h: New files.
4277 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4279 * Makefile.in (ns32k-dis.o): Add dependency.
4280 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4281 string, not as array of chars.
4283 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4285 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4287 * sparc-opc.c: Added sparclite extended FP operations, and
4288 versions of v9 impdep* instructions permitting specification of
4291 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4293 * i960-dis.c (reg_names): Now const.
4294 (struct sparse_tabent): New type, copied from array type in mem
4296 (ctrl): Local static array ctrl_tab now const.
4297 (cobr): Local static array cobr_tab now const.
4298 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4299 static variable mem_tab no longer explicitly initialized. Changed
4300 mem_init to const array of struct sparse_tabent.
4301 (reg): Local static variable reg_tab no longer explicitly
4302 initialized. Changed reg_init to const array of struct
4304 (ea): Local static array scale_tab now const.
4306 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4309 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4311 * configure.bat: the disassember needs to be enabled for
4312 "objdump -d" to work in djgpp.
4314 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4316 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4317 (invalid_float): Enabled general version, doesn't require running
4318 on ns32k host. Changed to take char* argument, and test for
4319 explicitly specified sizes, instead of using sizeof() on host CPU
4321 (INVALID_FLOAT): Cast first argument.
4322 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4323 list_P032, list_M032): Now const.
4324 (optlist, list_search): Made appropriate arguments now point to
4326 (print_insn_arg): Changed static array of one-character-string
4327 pointers into a static const array of characters; fixed sprintf
4328 statement accordingly.
4330 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4332 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4333 from distribution. A ns32k-dis.c from a previous distribution has
4334 been brought up to date and supports the new interface.
4336 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4338 * configure.in: add bfd_ns32k_arch target support.
4340 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4341 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4343 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4345 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4348 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4350 * h8300-dis.c, mips-dis.c: Don't use true and false.
4352 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4354 * configure.in: Change --with-targets to --enable-targets.
4356 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4358 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4359 opcodes to the first instruction with that opcode, to speed
4360 disassembly of large files. From ralphc@pyramid.com (Ralph
4363 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4365 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4367 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4369 * configure.bat: update to latest makefile.in
4371 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4373 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4374 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4375 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4376 slot insn is in a delay slot.
4377 * z8k-opc.h: (resflg): Fix patterns.
4378 * h8500-opc.h Fix CR insn patterns.
4380 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4382 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4383 "cmpl" before POWER versions, so that gas -many uses them.
4385 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4387 * disassemble.c: New file.
4388 * Makefile.in (OFILES): Add disassemble.o.
4389 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4390 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4391 binutils/configure.in.
4393 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4394 opcode being examined.
4396 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4398 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4399 (insert_ral, insert_ram, insert_ras): New functions.
4400 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4401 RAS for store with update.
4403 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4405 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4406 (edelsohn@npac.syr.edu).
4408 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4410 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4413 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4415 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4417 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4419 * ppc-opc.c (powerpc_operands): The signedp field has been
4420 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4421 instead. Add new operand SISIGNOPT.
4422 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4423 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4424 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4427 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4429 * i386-dis.c (struct private): Renamed to dis_private. `private'
4430 is a reserved word for dynix cc.
4432 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4434 * configure.in: Change error message to refer to bfd/config.bfd
4435 rather than bfd/configure.in.
4437 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4439 * ppc-opc.c: Define POWER2 as short alias flag.
4440 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4443 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4445 * i960-dis.c (print_insn_i960): Don't read a second word for
4446 opcodes 0, 1, 2 and 3.
4448 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4450 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4452 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4454 * m68881-ext.c: Removed; no longer used.
4455 * Makefile.in: Changed accordingly.
4457 * m68k-dis.c (ext_format_68881): Don't declare.
4458 (print_insn_m68k): If an instruction uses place 'i', it uses at
4459 least four fixed bytes.
4460 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4461 extended float, convert to double using floatformat_to_double, not
4462 ieee_extended_to_double, and fetch the data before converting it.
4464 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4466 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4467 davidj@ICSI.Berkeley.EDU (David Johnson).
4469 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4471 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4472 PowerPC uses bdnz[l][a].
4474 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4476 * dis-buf.c, i386-dis.c: Include sysdep.h.
4478 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4480 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4482 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4483 by Motorola PowerPC 601 with PPC_OPCODE_601.
4484 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4485 Disassemble Motorola PowerPC 601 instructions as well as normal
4486 PowerPC instructions.
4488 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4490 * i960-dis.c (reg, mem): Just use a static array instead of
4493 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4495 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4496 condition name index if this is for a negated condition.
4498 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4499 Floating point format for 'H' operand is backwards from normal
4500 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4501 operands (fmpyadd and fmpysub), handle bizarre register
4502 translation correctly for single precision format.
4504 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4505 or 'I' operands if the next format specifier is 'M' (fcmp
4506 condition completer).
4508 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4510 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4511 single number giving a bitmask for the MB and ME fields of an M
4512 form instruction. Change NB to accept 32, and turn it into 0;
4513 also turn 0 into 32 when disassembling. Seperated SH from NB.
4514 (insert_mbe, extract_mbe): New functions.
4515 (insert_nb, extract_nb): New functions.
4516 (SC_MASK): Mask out SA and LK bits.
4517 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4518 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4519 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4520 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4521 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4522 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4523 (powerpc_macros): Define table of macro definitions.
4524 (powerpc_num_macros): Define.
4526 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4527 if PPC_OPERAND_NEXT is set.
4529 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4531 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4532 char. Retrieve contents using bfd_getl32 instead of shifting.
4534 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4536 * ppc-opc.c: New file. Opcode table for PowerPC, including
4537 opcodes for POWER (RS/6000).
4538 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4539 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4540 (CFILES): Add ppc-dis.c.
4541 (ppc-dis.o, ppc-opc.o): New targets.
4542 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4544 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4546 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4547 No space before 'u', 'f', or 'N'.
4549 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4551 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4552 farther than we should.
4554 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4556 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4558 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4560 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4562 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4563 needs it, to prevent reading past the end of a section.
4565 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4567 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4568 Removed t,A case for la; always use t,A(b) case.
4570 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4572 From Ted Lemen <mellon@pepper.ncd.com>
4573 * mips-dis.c (print_insn_arg): Handle 'k'.
4574 * mips-opc.c: Make cache use k, not t.
4576 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4578 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4579 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4580 FLOAT_FORMAT_CODE to put out floating point register names.
4582 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4584 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4586 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4588 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4590 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4592 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4593 larger than 32. Moved dsxx32 variants first for disassembler.
4595 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4597 * z8kgen.c, z8k-opc.h: Add full lda information.
4599 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4601 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4602 movb instructions. Any necessary space will be emitted by
4603 the code to handle nullification completers.
4605 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4607 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4609 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4611 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4612 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4614 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4616 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4618 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4620 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4621 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4623 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4625 * m88k-dis.c (m88kdis): comment change. Remove space after
4627 (printop): handle new arg types DEC and XREG for m88110.
4629 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4631 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4632 type for absolute branch addresses. Delete special
4633 "ble" and "be" code in 'W' operand code.
4635 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4637 * mips-opc.c: Set hazard information correctly for branch
4638 likely instructions.
4640 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4642 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4643 info->fprintf_func for printing and info->print_address_func for
4646 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4648 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4650 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4652 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4653 Corrected second case of "b" for disassembler.
4655 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4657 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4658 to BFD swapping routines to correspond to BFD name changes.
4660 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4662 * mips-opc.c: Change div machine instruction to be z,s,t rather
4663 than s,t. Change div macro to be d,v,t rather than d,s,t.
4664 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4665 rem and remu which generates only the corresponding div
4666 instruction. This is for compatibility with the MIPS assembler,
4667 which only generates the simple machine instruction when an
4668 explicit destination of $0 is used.
4669 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4671 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4673 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4674 WR_31 hazard for bal, bgezal, bltzal.
4676 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4678 * hppa-dis.c (print_insn_hppa): Use print function
4679 from within the disassemble_info, not fprintf_filtered.
4681 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4683 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4684 Law, law@cs.utah.edu.)
4686 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4688 * mips-opc.c ("absu"): Removed.
4691 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4693 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4694 Changed hazard information to distinguish between memory load
4695 delays and coprocessor load delays.
4697 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4699 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4701 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4703 * configure.in: Don't pass cpu to config.bfd.
4705 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4707 * m88k-dis.c (m88kdis): Make class unsigned.
4709 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4711 * alpha-dis.c (print_insn_alpha): One branch format case was
4712 missing the instruction name.
4714 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4716 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4717 Add the arch-specific auxiliary files.
4718 (OFILES): Remove the arch-specific auxiliary files
4719 and use BFD_MACHINES instead of DIS_LIBS.
4720 * configure.in: Set BFD_MACHINES based on --with-targets option.
4722 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4724 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4727 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4729 * sparc-opc.c: Change CONST to const to deal with gcc
4730 -Dconst=__const -traditional.
4732 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4734 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4735 coprocessor instructions out of #if 0, and made them use new
4738 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4740 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4742 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4744 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4745 instruction, for use by the disassembler.
4747 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4748 hand-coded sign extensions that depended on 32-bit host ints.
4749 FIXME, we still depend on big-endian host bitfield ordering.
4750 (sparc_print_insn): Set the insn_info_valid field, and the
4751 other fields that describe the instruction being printed.
4753 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4755 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4756 `jmp' instead of just one of them.
4758 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4760 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4761 (fput_fp_reg_r): Renamed from fput_reg_r.
4762 (fput_fp_reg): New function.
4763 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4765 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4767 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4769 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4771 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4773 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4774 don't output a space.
4776 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4778 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4780 * mips-opc.c: New file, containing opcode table from
4781 ../include/opcode/mips.h.
4782 * Makefile.in: Add it.
4784 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4786 * m88k-dis.c: New file, moved in from gdb and changed to use the
4787 new dis-asm.h disassembler interface.
4788 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4789 (m88k-dis.o): New target.
4791 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4793 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4794 argument string const char * to correspond to opcode/mips.h.
4796 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4798 * mips-dis.c: Updated to account for name changes in new version
4800 * Makefile.in: Added header file dependencies.
4802 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4804 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4806 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4808 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4809 extend, rather than shifts.
4811 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4813 * Makefile.in: Undo 15 June change.
4815 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4817 * m68k-dis.c (print_insn_arg): Change return value to byte count
4819 * m68k-dis.c: Re-write to detect invalid operands before
4820 printing anything, so we can handle this the same way we
4821 handle invalid opcodes.
4823 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4825 * sh-dis.c, sh-opc.h: Understand some more opcodes.
4827 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
4829 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4832 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4834 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4836 * configure.in: Do make sysdep.h link.
4837 * Makefile.in: Search ../include. Don't search ../bfd.
4839 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
4841 Changes from Jeff Law, law@cs.utah.edu:
4842 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
4843 Do not print a space before the completers specified by
4846 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
4848 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
4849 defined, since gdb has been fixed.
4851 Changes from Jeff Law, law@cs.utah.edu:
4852 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
4853 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
4854 be a *disassemble_info, not a *FILE.
4855 * hppa-dis.c: Support 'd', '!', and 'a'.
4856 * hppa-dis.c: Support 's' to extract a 2 bit space register.
4857 * hppa-dis.c: Delete cases which are no longer needed.
4859 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
4861 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
4863 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4865 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
4868 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
4870 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
4871 * configure.in: No longer need to configure to get sysdep.h.
4873 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
4875 * Patches from Jeffrey Law <law@cs.utah.edu>.
4876 * hppa-dis.c: Support 'I', 'J', and 'K' in output
4877 templates for 1.1 FP computational instructions.
4879 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4881 * h8500-dis.c (print_insn_h8500): Address argument is type
4883 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
4886 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
4887 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
4889 * sparc-dis.c (compare_opcodes): Move static declaration to
4892 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4894 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
4895 instruction, remove unimp hack from 'l' argument.
4897 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
4899 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
4902 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
4904 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
4905 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
4908 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4910 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
4911 arrays of string pointers to 2-d arrays of chars, to save
4914 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
4916 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
4917 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
4919 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4921 * hppa-dis.c: New file from Utah, adapted to new disassembler
4923 * Makefile.in: Include it.
4925 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4927 * sh-dis.c, sh-opc.h: New files.
4929 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4931 * alpha-dis.c, alpha-opc.h: New files.
4933 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4935 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
4938 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
4940 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
4942 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
4944 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
4947 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
4949 * sparc-dis.c: Use fprintf_func a few places where I forgot,
4950 and double percent signs a few places.
4952 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
4954 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
4955 Use info->print_address_func not print_address.
4957 * dis-buf.c (generic_print_address): New function.
4959 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4961 * Makefile.in: Add sparc-dis.c.
4962 sparc-dis.c: New file, merges binutils and gdb versions as follows:
4964 Add `add' instruction to the set that get checked
4965 for a preceding `sethi' in order to print an absolute address.
4966 * (print_insn): Disassembly prefers real instructions.
4967 (is_delayed_branch): Speed up.
4968 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
4969 Still missing some float ops, and needs testing.
4970 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
4971 F_ALIAS. Use printf, not fprintf, when not passing a file
4973 (compare_opcodes): Check that identical instructions have
4974 identical opcodes, complain otherwise.
4977 * Include reg_names.
4979 Use dis-asm.h/read_memory_func interface.
4981 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
4983 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
4984 deliberately return non-zero to setjmp from longjmp. Otherwise
4985 this code fails to compile.
4987 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
4989 * m68k-dis.c: Fix prototype for fetch_arg().
4991 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4993 * dis-buf.c: New file, for new read_memory_func interface.
4994 Makefile.in (OFILES): Include it.
4995 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
4996 Use new read_memory_func interface.
4998 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5000 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5001 * h8500-opc.h: Fix couple of opcodes.
5003 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5005 * Makefile.in: add dvi & installcheck targets
5007 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5009 * Makefile.in: Update for h8500-dis.c.
5011 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5013 * h8500-dis.c, h8500-opc.h: New files
5015 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5017 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5018 ../include/dis-asm.h.
5019 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5020 and ../gdb/m68k-pinsn.c).
5021 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5022 and ../gdb/i386-pinsn.c).
5023 * m68881-ext.c: New file. Moved definition of
5024 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5025 * Makefile.in: Adjust for new files.
5026 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5027 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5028 can be dis-assembled.
5030 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5032 * mips-dis.c (print_insn_arg): Now returns void.
5034 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5036 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5037 files that use the macros.
5039 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5041 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5042 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5043 (CFILES): Added mips-dis.c.
5045 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5047 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5048 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5050 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5052 * Makefile.in: Improve *clean rules.
5053 * configure.in: Allow a default host.
5055 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5057 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5058 files include other sysdep files
5060 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5062 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5064 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5066 * configure.in: For host support, use ../bfd/configure.host
5067 so it stays in sync with the ../bfd/hosts database.
5069 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5071 * configure.in: use cpu-vendor-os triple instead of nested cases
5073 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5075 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5076 *always* the wrong one.
5078 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5080 * z8kgen.c: added copyright info
5082 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5084 * z8k-dis.c (unparse_instr): prettier tabs
5085 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5087 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5089 * configure.in: Add ncr* configuration.
5090 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5091 picayune ANSI compilers happy.
5093 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5095 * configure.in (i386): Make i386 and i486 synonymous for now.
5096 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5098 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5100 * Makefile.in (install): Fix typo.
5102 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5104 * Makefile.in (make): Remove obsolete crud.
5105 (sparc-opc.o): Avoid Sun Make VPATH bug.
5107 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5109 * Makefile.in: since there are no SUBDIRS, remove rule and
5110 references of subdir_do.
5112 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5114 * Makefile.in (install): Get the library name right here too.
5115 Don't install bfd.h, since it's unrelated to this library. No
5116 subdirs to recurse into, either.
5117 (CFILES): The source file has a .c suffix, not .o.
5119 * sparc-opc.c: New file, moved from BFD.
5120 * Makefile.in (OFILES): Build it.
5122 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5124 * z8k-dis.c: fixed forward refferences of some declarations.
5126 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5128 * Makefile.in: get the name of the library right
5130 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5132 * z8k-dis.c: knows how to disassemble z8k stuff
5133 * z8k-opc.h: new file full of z8000 opcodes
5137 version-control: never