opcodes/ChangeLog

   1 Tue Sep  5 18:28:10 1995  Doug Evans  <dje@canuck.cygnus.com>
   2
   3         * sparc-dis.c: Remove all references to NO_V9.
   4
   5 Tue Sep  5 20:03:26 1995  Ian Lance Taylor  <ian@cygnus.com>
   6
   7         * aclocal.m4: Just include ../bfd/aclocal.m4.
   8         * configure: Rebuild.
   9
  10 Tue Sep  5 16:09:59 1995  Doug Evans  <dje@canuck.cygnus.com>
  11
  12         * sparc-dis.c (X_DISP19): Define.
  13         (print_insn, case 'G'): Use it.
  14         (print_insn, case 'L'): Sign extend displacement.
  15
  16 Mon Sep  4 14:28:46 1995  Ian Lance Taylor  <ian@cygnus.com>
  17
  18         * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
  19         Subsitute CFLAGS and AR.  Call AC_PROG_INSTALL.  Don't substitute
  20         host_makefile_frag or frags.
  21         * aclocal.m4: New file.
  22         * configure: Rebuild.
  23         * Makefile.in (INSTALL): Set to @INSTALL@.
  24         (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
  25         (INSTALL_DATA): Set to @INSTALL_DATA@.
  26         (AR): Set to @AR@.
  27         (AR_FLAGS): Set to rc rather than qc.
  28         (CC): Define as @CC@.
  29         (CFLAGS): Set to @CFLAGS@.
  30         (@host_makefile_frag@): Remove.
  31         (config.status): Remove dependency upon @frags@.
  32
  33         * configure.in: ../bfd/config.bfd now just sets shell variables.
  34         Use them rather than looking through target Makefile fragments.
  35         * configure: Rebuild.
  36
  37 start-sanitize-sh3e
  38 Thu Aug 31 12:35:32 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
  39
  40         * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
  41
  42 end-sanitize-sh3e
  43 Wed Aug 30 13:52:28 1995  Doug Evans  <dje@canuck.cygnus.com>
  44
  45         * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
  46         Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
  47         sparc64 insns.
  48
  49         * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
  50         (lookup_{name,value}): New functions.
  51         (prefetch_table): New static local.
  52         (sparc_{encode,decode}_prefetch): New functions.
  53         * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
  54
  55 start-sanitize-sh3e
  56 Wed Aug 30 11:11:58 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
  57
  58         * sh-opc.h: Add blank lines to improve readabililty of sh3e
  59         instructions.
  60
  61 end-sanitize-sh3e
  62 Wed Aug 30 11:09:38 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
  63
  64         * sh-dis.c: Correct comment on first line of file.
  65
  66 Tue Aug 29 15:37:18 1995  Doug Evans  <dje@canuck.cygnus.com>
  67
  68         * disassemble.c (disassembler): Handle bfd_mach_sparc64.
  69
  70         * sparc-opc.c (asi, membar): New static locals.
  71         (sparc_{encode,decode}_{asi,membar}): New functions.
  72         (sparc_opcodes, membar insn): Fix.
  73         * sparc-dis.c (print_insn): Call sparc_decode_asi.
  74         Support decoding of membar masks.
  75         (X_MEMBAR): Define.
  76
  77 Sat Aug 26 21:22:48 1995  Ian Lance Taylor  <ian@cygnus.com>
  78
  79         * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
  80
  81 Mon Aug 21 17:33:36 1995  Ian Lance Taylor  <ian@cygnus.com>
  82
  83         * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
  84         and likewise for the other branches.  Add bhs as an alias for bcc,
  85         and likewise for the size variants.  Add dbhs as an alias for
  86         dbcc.
  87
  88 start-sanitize-sh3e
  89 Fri Aug 11 13:40:24 1995  Jeff Law  (law@snake.cs.utah.edu)
  90
  91         * sh-opc.h (FP sts instructions): Update to match reality.
  92
  93 end-sanitize-sh3e
  94 Mon Aug  7 16:12:58 1995  Ian Lance Taylor  <ian@cygnus.com>
  95
  96         * m68k-dis.c: (fpcr_names): Add % before all register names.
  97         (reg_names): Likewise.
  98         (print_insn_arg): Don't explicitly print % before register names.
  99         Add % before register names in static array names.  In case 'r',
 100         print data registers as `@(Dn)', not `Dn@'.  When printing a
 101         memory address, don't print @# before it.
 102         (print_indexed): Change base_disp and outer_disp from int to
 103         bfd_vma.  Print using MIT syntax, not mutant invalid Motorola
 104         syntax.  Sign extend 8 byte displacement correctly.
 105         (print_base): Print using MIT syntax.  Print zpc when appropriate.
 106         Change parameter disp from int to bfd_vma.
 107
 108         * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
 109         for jsr.
 110
 111 start-sanitize-sh3e
 112 Mon Aug  7 02:21:40 1995  Jeff Law  (law@snake.cs.utah.edu)
 113
 114         * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
 115         F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
 116         * sh-opc.h (sh_arg_type): Add new operand types.
 117         (sh_table): Add new opcodes from SH3E Floating Point ISA.
 118
 119 end-sanitize-sh3e
 120 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
 121
 122         * Makefile.in (distclean): Remove generated file config.h.
 123
 124 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
 125
 126         * Makefile.in (distclean): Remove generated file config.h.
 127
 128 Wed Aug  2 18:33:40 1995  Ian Lance Taylor  <ian@cygnus.com>
 129
 130         * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
 131         Clean up tables.
 132         * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
 133         (opcode): Remove.
 134         (print_insn_m68k): Change d to be const.  Use m68k_numopcodes
 135         rather than numopcodes.  Use m68k_opcodes rather than removed
 136         opcode function.  Don't check F_ALIAS.
 137         (print_insn_arg): Change first parameter to be const char *.
 138         * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
 139         (m68k-opc.o): New target.
 140         * configure.in: Build m68k-opc.o for bfd_m68k_arch.
 141         * configure: Rebuild.
 142
 143 Wed Aug  2 08:23:38 1995  Doug Evans  <dje@canuck.cygnus.com>
 144
 145         * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
 146         (opcode_bits, opcode_hash_table): New variables.
 147         (opcodes_initialized): Renamed from opcodes_sorted.
 148         (build_hash_table): New function.
 149         (is_delayed_branch): Use hash table.
 150         (print_insn): Renamed from print_insn_sparc, made static.
 151         Build and use hash table.  If !sparc64, ignore sparc64 insns,
 152         and vice-versa if sparc64.
 153         (print_insn_sparc, print_insn_sparc64): New functions.
 154         (compare_opcodes): Move sparc64 opcodes to end.
 155         Print commutative insns with constant second.
 156         * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
 157
 158 Tue Aug  1 00:12:49 1995  Ian Lance Taylor  <ian@cygnus.com>
 159
 160         * sh-dis.c (print_insn_shx): Remove unused local dslot.  Use
 161         print_address_func for A_BDISP12 and A_BDISP8.  Correct test which
 162         avoids printing a delay slot in a delay slot.
 163         * sh-opc.h (sh_table): Fully bracket last entry.
 164
 165 Mon Jul 31 12:04:47 1995  Doug Evans  <dje@canuck.cygnus.com>
 166
 167         * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
 168
 169 Wed Jul 12 00:59:34 1995  Ken Raeburn  <raeburn@kr-pc.cygnus.com>
 170
 171         * configure.in: Get host_makefile_frag from ${srcdir}.
 172
 173         * configure.in: Autoconfiscated.  Check for string[s].h.  Create
 174         config.h from config.in.  Don't set up sysdep.h link.
 175         * sysdep.h: New file.
 176         * configure, config.in: New files, generated from configure.in.
 177         * Makefile.in: Updated to be processed autoconf-style.
 178         (distclean): Keep sysdep.h.  Remove config.log and config.cache.
 179         (Makefile): Depend on config.status.
 180         (config.status): New rule.
 181         * configure.bat: Update Makefile substitutions.
 182
 183 Tue Jul 11 14:23:37 1995  Jeff Spiegel  <jeffs@lsil.com>
 184
 185         * mips-opc.c (L1): Define.
 186         (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
 187         addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
 188         and wb.
 189
 190 Tue Jul 11 11:49:49 1995  Ian Lance Taylor  <ian@cygnus.com>
 191
 192         * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
 193         if ISA 3 and addu otherwise, replacing or, since some MIPS chips
 194         have multiple add units but only a single logical unit.
 195
 196         * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
 197         shifted by 18, without any insertion or extraction function.
 198         (insert_cr, extract_cr): Remove.
 199
 200 start-sanitize-arc
 201 Mon Jul  3 11:54:31 1995  Ian Lance Taylor  <ian@cygnus.com>
 202
 203         * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
 204
 205 end-sanitize-arc
 206 Wed Jun 21 20:05:39 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 207
 208         * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
 209         register names.
 210
 211 Thu Jun 15 17:23:31 1995  Stan Shebs  <shebs@andros.cygnus.com>
 212
 213         * mpw-config.in: Add sh and i386 configs, remove sparc config.
 214         * sh-opc.h: Add copyright.
 215
 216 Mon Jun  5 03:30:43 1995  Ken Raeburn  <raeburn@kr-laptop.cygnus.com>
 217
 218         * Makefile.in (crunch-m68k): Delete extra target accidentally
 219         checked in a while ago.
 220
 221 Wed May 24 16:22:13 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 222
 223         * sh-opc.h (sh_table): Add SH3 support.
 224
 225 Wed May 24 14:16:08 1995  Steve Chamberlain  <sac@slash.cygnus.com>
 226
 227         * sh-opc.h: Added bsrf and braf.
 228
 229 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
 230
 231         * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns.  Delete
 232         bogus [ls]fm{ea,fd} patterns.
 233
 234         * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
 235         * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
 236         initialize it from memory.  Make function static.
 237         (print_insn_{big,little}_arm): New functions.
 238         * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
 239         the correct endianness.
 240
 241 start-sanitize-arc
 242 Sat Apr 29 23:20:05 1995  Doug Evans  <dje@chestnut.cygnus.com>
 243
 244         * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
 245         (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
 246 end-sanitize-arc
 247
 248 Mon Apr 24 14:18:05 1995  Jason Molenda   (crash@phydeaux.cygnus.com>
 249
 250         * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
 251         enum list.
 252
 253 Wed Apr 19 14:07:03 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
 254
 255         * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
 256         17th, so that it builds again using GCC as the compiler.
 257
 258 Tue Apr 18 12:14:51 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 259
 260         * mips-dis.c (print_insn_little_mips): Cast return value from
 261         bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
 262         expects an unsigned long, and that might be fewer words of
 263         argument storage (e.g., if bfd_vma is long long on a 32-bit
 264         machine).
 265         (print_insn_big_mips): Likewise with bfd_getb32 value.
 266         (_print_insn_mips): Now static.
 267
 268 Mon Apr 17 12:23:28 1995  Kung Hsu  <kung@rtl.cygnus.com>
 269
 270         * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
 271         gcc memory hog problem with initializer is fixed.
 272
 273 start-sanitize-arc
 274 Wed Apr 12 09:04:12 1995  Doug Evans  <dje@canuck.cygnus.com>
 275
 276         * arc-opc.c (NULL): Define.
 277         (arc_operands, insn fields u,s): Delete.
 278         (arc_operands, insn fields a,b,c): Mark as signed.
 279         (arc_opcodes): No longer const, links computed at run-time.
 280         (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
 281         suffixes that affect the insn code.
 282         (arc_opcodes): Resort table to macros are first.
 283         (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
 284         (arc_opcodes, st [b] entry): Likewise.
 285         (arc_opcodes, st [b,d] entry): Fix mask, value.
 286         (arc_reg_names): Add entries for r29, r30, r31, r60.
 287         (opcode_map, icode_map): New static globals.
 288         (arc_opcode_init_tables): Initialize them.
 289         (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
 290         (insert_shimmoffset): Signal error if register present.
 291         Validate constant.
 292         * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
 293 end-sanitize-arc
 294
 295 Mon Apr 10 15:55:01 1995  Stan Shebs  <shebs@andros.cygnus.com>
 296
 297         Merge in support for Mac MPW as a host.
 298         (Old change descriptions retained for informational value.)
 299
 300         * mpw-config.in (archname): Compute from the config.
 301         (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
 302
 303         * mpw-config.in (target_arch): Compute from canonical target.
 304         (m68k, mips, powerpc, sparc): Add architectures.
 305         * mpw-make.in (disassemble.c.o): Add.
 306         (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
 307
 308         * mpw-config.in (BFD_MACHINES): Set to a default value.
 309         * mpw-make.in (BFD_MACHINES): Remove wired-in value.
 310
 311         * mpw-make.in (CSEARCH): Add extra-include to search path.
 312
 313         * mpw-config.in (varargs.h): Don't create.
 314         (sysdep.h): Create using forward-include.
 315         * mpw-make.in (CSEARCH): Add include/mpw to search path.
 316
 317         * mpw-config.in: New file, MPW version of configure.in.
 318         * mpw-make.in: New file, MPW version of Makefile.in.
 319
 320 start-sanitize-arc
 321 Thu Apr  6 20:36:08 1995  Doug Evans  <dje@chestnut.cygnus.com>
 322
 323         * arc-dis.c (print_insn): New parameter `big_p'.  Callers updated.
 324         Call arc_get_opcode_mach to map bfd mach number to opcode value.
 325         (print_insn_*): Pass bfd mach number, not opcode version.
 326         * arc-opc.c (arc_get_opcode_mach): New function.
 327 end-sanitize-arc
 328
 329 Fri Mar 31 14:23:38 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 330
 331         * alpha-dis.c (print_insn_alpha): Put empty statement after
 332         default label.
 333
 334 Tue Mar 21 10:51:40 1995  Jeff Law  (law@snake.cs.utah.edu)
 335
 336         * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
 337         (low_sign_extend): Likewise.
 338         (get_field): Delete unused function.
 339         (set_field, deposit_14, deposit_21): Likewise.
 340
 341 Fri Mar 17 15:55:53 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
 342
 343         * i386-dis.c: Support for more pentium opcodes.  From Guy Harris
 344           (guy@netapp.com).
 345
 346 Tue Mar 14 00:52:57 1995  Ken Raeburn  (raeburn@kr-pc.cygnus.com)
 347
 348         Sat Feb 11 17:22:41 1995  Klaus Kaempf  (kkaempf@didymus.rmi.de)
 349
 350         * alpha-opc.h (OSF_ASMCODE): define
 351         print pal-code names as defined in App C of the
 352         Alpha Architecture Reference Manual
 353
 354         * alpha-dis.c: cleaned up output
 355         print stylized code forms as defined in App A.4.3 of the
 356         Alpha Architecture Reference Manual
 357
 358 Wed Mar  8 15:21:14 1995  Ian Lance Taylor  <ian@cygnus.com>
 359
 360         * mips-opc.c: Add new mips4 instructions.  Don't set INSN_RFE for
 361         `rfe'.
 362         * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
 363         'N', and 'M'.
 364
 365 Wed Mar  8 02:54:05 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 366
 367         * m68k-dis.c (opcode): New function.  Returns address of opcode
 368         table entry given index, even if the opcode table was split to
 369         work around gcc bugs.
 370         (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
 371         directly.
 372         (BREAK_UP_BIG_DECL): Make secondary array static and const.
 373         (reg_names): Now const.
 374         (print_insn_arg): Arrays cacheFieldName and names now const.
 375         (print_indexed): Array scales now const.
 376
 377 start-sanitize-arc
 378 Tue Mar  7 21:14:14 1995  Doug Evans  <dje@chestnut.cygnus.com>
 379
 380         * arc-dis.c (print_insn_arc_base): Split into big and little fns.
 381         (print_insn_arc_{host,graphics,audio}): Likewise.
 382         (print_insn): Add prototype.
 383         (arc_get_disassembler): New arg `big_p'.  Return little or big
 384         print fn accordingly.
 385         * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
 386         (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
 387         (arc_opval_supported): Likewise.
 388         * disassemble.c (disassembler): Pass big endian flag to
 389         arc_get_disassembler.
 390 end-sanitize-arc
 391
 392 Tue Mar  7 16:41:21 1995  Ian Lance Taylor  <ian@cygnus.com>
 393
 394         * ppc-opc.c: Sort recently added instructions by minor opcode
 395         number within major opcode number.
 396
 397 Mon Mar  6 10:04:36 1995  Jeff Law  (law@snake.cs.utah.edu)
 398
 399         * hppa-dis.c: Include libhppa.h.
 400
 401 Fri Feb 24 19:15:36 1995  Ian Lance Taylor  <ian@cygnus.com>
 402
 403         * mips-opc.c: Change dli to use M_DLI, and add dla.
 404
 405 Mon Feb 20 23:54:38 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 406
 407         * Makefile.in (ALL_MACHINES):  Add w65-dis.o.
 408
 409 start-sanitize-arc
 410 Fri Feb 17 12:42:25 1995  Doug Evans  <dje@chestnut.cygnus.com>
 411
 412         * arc-dis.c (arc_get_disassembler): Change argument to int,
 413         one of bfd_mach_arc_xxx.  All callers updated.
 414 end-sanitize-arc
 415
 416 Thu Feb 16 17:34:41 1995  Ian Lance Taylor  <ian@cygnus.com>
 417
 418         * mips-opc.c: Add r4650 mul instruction.
 419
 420 Wed Feb 15 15:45:20 1995  Ian Lance Taylor  <ian@cygnus.com>
 421
 422         * mips-opc.c: Add uld and usd macros for unaligned double load and
 423         store.
 424
 425 Tue Feb 14 13:17:37 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
 426
 427         * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
 428         mfdcr, mtdcr, icbt, iccci.
 429
 430 start-sanitize-arc
 431 Mon Feb 13 11:09:17 1995  Doug Evans  <dje@canuck.cygnus.com>
 432
 433         * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
 434         * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
 435         ('L' operand): Mark as ARC_OPERAND_ADDRESS.
 436         (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
 437         (arc_opcodes, ld/st insns): Fix address writeback operand letter.
 438         (insert_absaddr): New function.
 439
 440 Thu Feb  9 19:19:23 1995  Doug Evans  <dje@canuck.cygnus.com>
 441
 442         * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
 443         New argument `cpu', pass it to arc_opcode_init_tables.
 444         Document byte order dependencies.  Ignore unsupported insns.
 445         (arc_get_disassembler): New function.
 446         (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
 447         print_insn_arc_audio): New functions.
 448         * arc-opc.c (MULTSHIFT operand): Delete.
 449         (UNSIGNED, SATURATION): New operands.
 450         (mac, mul, mul64, mulu64): New insns.
 451         (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
 452         (padc, padd, pmov, pand, psbc, psub, swap): New insns.
 453         (host,graphics,audio extended and auxiliary regs): Define.
 454         (ss, sc, mh, ml): New suffixes.
 455         (arc_opcode_supported, arc_opval_supported): New functions.
 456         (insert_multshift, extract_multshift): Deleted.
 457         * disassemble.c (disassembler, case bfd_arch_arc): Call
 458         arc_get_disassembler to get disassembler routine.
 459 end-sanitize-arc
 460
 461 Thu Feb  9 12:28:13 1995  Stan Shebs  <shebs@andros.cygnus.com>
 462
 463         * i960-dis.c (struct tabent, struct sparse_tabent): Change the
 464         signed char fields to shorts, more portable.
 465
 466 Wed Feb  8 17:29:29 1995  Stan Shebs  <shebs@andros.cygnus.com>
 467
 468         * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
 469         char fields as signed chars, since they may have negative values.
 470
 471 Mon Feb  6 10:52:06 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
 472
 473         * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
 474           (mycroft@netbsd.org).
 475
 476 Mon Jan 30 12:38:00 1995  Ian Lance Taylor  <ian@cygnus.com>
 477
 478         From "Logg, Ed" <elogg@ea.com>:
 479         * ppc-opc.c (extract_bdm): Correct parenthezisation.
 480         * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
 481         value.
 482
 483 Thu Jan 26 18:32:08 1995  Ian Lance Taylor  <ian@cygnus.com>
 484
 485         * ppc-opc.c: Changes based on patch from David Edelsohn
 486         <edelsohn@mhpcc.edu>.
 487         (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
 488         SPR.
 489         (FXM_MASK): Define.
 490         (insert_tbr): New static function.
 491         (extract_tbr): New static function.
 492         (XFXFXM_MASK, XFXM): Define.
 493         (XSPRBAT_MASK, XSPRG_MASK): Define.
 494         (powerpc_opcodes): Add instructions to access special registers by
 495         name.  Add mtcr and mftbu.
 496
 497 Tue Jan 17 10:56:43 1995  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 498
 499         * mips-opc.c (P3): Define.
 500         (mips_opcodes): Add mad and madu.
 501
 502 Sun Jan 15 16:32:59 1995  Steve Chamberlain  <sac@splat>
 503
 504         * configure.in: Add W65 support.
 505         * disassemble.c: Likewise.
 506         * w65-opc.h, w65-dis.c: New files.
 507
 508 Wed Dec 28 22:15:33 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
 509
 510         * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
 511         immediates.
 512
 513 start-sanitize-arc
 514 Tue Dec 20 10:36:55 1994  Doug Evans  <dje@canuck.cygnus.com>
 515
 516         * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
 517         slot.
 518         * arc-opc.c (extract_reladdr): New function.
 519         (insert_reladdr): Store address right-shifted by 2.
 520 end-sanitize-arc
 521
 522 Tue Dec 20 11:25:12 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 523
 524         * mips-opc.c: Add dli as a synonym for li.
 525
 526 start-sanitize-arc
 527 Mon Dec 19 12:35:51 1994  Doug Evans  <dje@canuck.cygnus.com>
 528
 529         * arc-opc.c (insertion fns): Pass pointer to value's table entry.
 530         All uses changed.
 531         (extraction fns): Insn argument now array of two words.  Return pointer
 532         to value's table entry.  All uses changed.
 533         (arc_opcode_lookup_suffix): Exported for arc-dis.c.
 534         (insert_multshift, extract_multshift): New fns.
 535         (arc_operands): Add support for cache bypass suffix.  Add support for
 536         predefined aux regs.  Modifier bits moved to flags field.
 537         (arc_opcodes): Likewise.
 538         Add mul/mulu/shift insns.  Syntax of zero/sign extension insns changed.
 539         New insn rlc.  Update to syntax in programmer's manual.
 540         (arc_reg_names): Fix typo in lp_count.  Add predefined aux regs.
 541         (arc_suffixes): New synonyms lo,hs for cs,cc.  New suffix for cache
 542         bypass.
 543         (arc_opcode_init_tables): New argument to indicate cpu type.
 544         (insert_reg): Handle predefined aux regs.
 545         (extract_reg): Likewise.
 546         (lookup_register): New fn.
 547         * arc-dis.c (arc_condition_codes): Deleted.
 548         (print_insn_arc): Handle insns with 32 bit immediate constants better.
 549         Clean up modifier handling.  Handle predefined aux regs.
 550 end-sanitize-arc
 551
 552 Thu Dec  8 18:23:31 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
 553
 554         * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
 555         print something for reserved opcode values, even if it won't
 556         assemble again.
 557
 558         * mips-dis.c (_print_insn_mips): When initializing, shift right
 559         and mask, to avoid sign extension problems on the Alpha.
 560
 561         * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
 562         control registers.
 563
 564 start-sanitize-arc
 565 Tue Nov 29 18:02:43 1994  Doug Evans  <dje@canuck.cygnus.com>
 566
 567         * configure.in: Add ARC support.
 568         * disassemble.c: Likewise.
 569         * arc-dis.c, arc-opc.c: New files.
 570 end-sanitize-arc
 571
 572 Wed Nov 23 22:34:51 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
 573
 574         * sh-opc.h (mov.l gbr): Get direction right.
 575         * sh-dis.c (print_insn_shx): New function.
 576         (print_insn_shl, print_insn_sh): Call print_insn_shx to
 577         print opcodes with right byte order.
 578
 579 Thu Nov  3 19:32:22 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
 580
 581         * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
 582         to avoid conflicts with getopt.
 583
 584 Mon Oct 31 18:48:10 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 585
 586         * hppa-dis.c (print_insn_hppa): Read the instruction using
 587         bfd_getb32, so that it works on a little endian or 64 bit host.
 588         Remove unused local variable op.
 589
 590 Tue Oct 25 17:07:57 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 591
 592         * mips-opc.c: Use or instead of addu for pseudo-op move, since
 593         addu does not work correctly if -mips3.
 594
 595 Wed Oct 19 13:40:16 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 596
 597         * a29k-dis.c (print_special): Add special register names defined
 598         on 29030, 29040 and 29050.
 599         (print_insn): Handle new operand type 'I'.
 600
 601 Wed Oct 12 11:59:55 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 602
 603         * Makefile.in (INSTALL): Use top level install.sh script.
 604
 605 Wed Oct  5 19:16:29 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 606
 607         * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
 608         that it works on a little endian host.
 609
 610 Tue Oct  4 12:14:21 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 611
 612         * configure.in: Use ${config_shell} when running config.bfd.
 613
 614 Wed Sep 21 18:49:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 615
 616         * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
 617
 618 Thu Sep 15 16:30:22 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 619
 620         * a29k-dis.c (print_insn): Print the opcode.
 621
 622 Wed Sep 14 17:52:14 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 623
 624         * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
 625
 626 Sun Sep 11 22:32:17 1994  Jeff Law  (law@snake.cs.utah.edu)
 627
 628         * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
 629
 630 Tue Sep  6 11:37:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 631
 632         * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
 633         which store a value into memory.
 634
 635 Sun Sep 04 17:58:10 1994  Richard Earnshaw (rwe@pegasus.esprit.ec.org)
 636
 637         * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
 638         * arm-dis.c, arm-opc.h: New files.
 639
 640 Fri Aug  5 14:00:05 1994  Stan Shebs  (shebs@andros.cygnus.com)
 641
 642         * Makefile.in (ns32k-dis.o): Add dependency.
 643         * ns32k-dis.c (print_insn_arg): Declare initialized local as
 644         string, not as array of chars.
 645
 646 Thu Jul 28 18:14:16 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
 647
 648         * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
 649
 650         * sparc-opc.c: Added sparclite extended FP operations, and
 651         versions of v9 impdep* instructions permitting specification of
 652         the OPF field.
 653
 654 Tue Jul 26 16:36:03 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
 655
 656         * i960-dis.c (reg_names): Now const.
 657         (struct sparse_tabent): New type, copied from array type in mem
 658         function.
 659         (ctrl): Local static array ctrl_tab now const.
 660         (cobr): Local static array cobr_tab now const.
 661         (mem): Local variables reg1, reg2, reg3 now point to const.  Local
 662         static variable mem_tab no longer explicitly initialized.  Changed
 663         mem_init to const array of struct sparse_tabent.
 664         (reg): Local static variable reg_tab no longer explicitly
 665         initialized.  Changed reg_init to const array of struct
 666         sparse_tabent.
 667         (ea): Local static array scale_tab now const.
 668
 669         start-sanitize-i960xl
 670         * i960-dis.c (reg): Added i960XL instructions to reg_init table.
 671         (REG_MAX): Updated.
 672         end-sanitize-i960xl
 673
 674 Tue Jul 19 21:00:00 1994  DJ Delorie (dj@ctron.com)
 675
 676         * configure.bat: the disassember needs to be enabled for
 677         "objdump -d" to work in djgpp.
 678
 679 Wed Jul 13 18:01:58 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
 680
 681         * ns32k-dis.c: Deleted all code in "#ifdef GDB".
 682         (invalid_float): Enabled general version, doesn't require running
 683         on ns32k host.  Changed to take char* argument, and test for
 684         explicitly specified sizes, instead of using sizeof() on host CPU
 685         types.
 686         (INVALID_FLOAT): Cast first argument.
 687         (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
 688         list_P032, list_M032): Now const.
 689         (optlist, list_search): Made appropriate arguments now point to
 690         const.
 691         (print_insn_arg): Changed static array of one-character-string
 692         pointers into a static const array of characters; fixed sprintf
 693         statement accordingly.
 694
 695 Sun Jul 10 00:27:47 1994  Ian Dall  (dall@hfrd.dsto.gov.au)
 696
 697         * opcodes/ns32k-dis.c: Semi-new file.  Had apparently been dropped
 698         from distribution. A ns32k-dis.c from a previous distribution has
 699         been brought up to date and supports the new interface.
 700
 701         * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
 702
 703         * configure.in: add bfd_ns32k_arch target support.
 704
 705         * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
 706         Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
 707
 708 Wed Jun 29 22:10:37 1994  Steve Chamberlain  (sac@cygnus.com)
 709
 710         * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
 711         disassembly right.
 712
 713 Tue Jun 28 13:22:06 1994  Stan Shebs  (shebs@andros.cygnus.com)
 714
 715         * h8300-dis.c, mips-dis.c: Don't use true and false.
 716
 717 Thu Jun 23 12:53:19 1994  David J. Mackenzie  (djm@rtl.cygnus.com)
 718
 719         * configure.in: Change --with-targets to --enable-targets.
 720
 721 Wed Jun 22 13:38:32 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 722
 723         * mips-dis.c (_print_insn_mips): Build a static hash table mapping
 724         opcodes to the first instruction with that opcode, to speed
 725         disassembly of large files.  From ralphc@pyramid.com (Ralph
 726         Campbell).
 727
 728 Tue Jun  7 12:49:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 729
 730         * Makefile.in (mostlyclean): Fix typo (was mostyclean).
 731
 732 Wed May 11 22:32:00 1994  DJ Delorie (dj@ctron.com)
 733
 734         * configure.bat: update to latest makefile.in
 735
 736 Sat May  7 17:13:21 1994  Steve Chamberlain  (sac@cygnus.com)
 737
 738         * a29k-dis.c (print_insn): Print 'x' type operand in hex.
 739         * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
 740         * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
 741         slot insn is in a delay slot.
 742         * z8k-opc.h: (resflg): Fix patterns.
 743         * h8500-opc.h Fix CR insn patterns.
 744
 745 Fri May  6 14:34:46 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 746
 747         * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
 748         "cmpl" before POWER versions, so that gas -many uses them.
 749
 750 Thu Apr 28 18:32:36 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
 751
 752         * disassemble.c: New file.
 753         * Makefile.in (OFILES): Add disassemble.o.
 754         (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
 755         * configure.in: Define ARCHDEFS in Makefile.  Code taken from
 756         binutils/configure.in.
 757
 758         * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
 759         opcode being examined.
 760
 761 Thu Apr 21 17:08:40 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 762
 763         * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
 764         (insert_ral, insert_ram, insert_ras): New functions.
 765         (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
 766         RAS for store with update.
 767
 768 Sat Apr 16 23:41:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 769
 770         * ppc-opc.c (powerpc_opcodes): Correct fcir.  From David Edelsohn
 771         (edelsohn@npac.syr.edu).
 772
 773 Wed Apr  6 17:11:45 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 774
 775         * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
 776         immediate argument.
 777
 778 Mon Apr  4 16:30:46 1994  Doug Evans  (dje@canuck.cygnus.com)
 779
 780         * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
 781
 782 Mon Apr  4 13:22:00 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 783
 784         * ppc-opc.c (powerpc_operands): The signedp field has been
 785         removed, so don't initialize it.  Set the PPC_OPERAND_SIGNED flag
 786         instead.  Add new operand SISIGNOPT.
 787         (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
 788         Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
 789         * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
 790         than signedp field.
 791
 792 Wed Mar 30 00:31:49 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 793
 794         * i386-dis.c (struct private):  Renamed to dis_private. `private'
 795         is a reserved word for dynix cc.
 796
 797 Mon Mar 28 13:00:15 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 798
 799         * configure.in: Change error message to refer to bfd/config.bfd
 800         rather than bfd/configure.in.
 801
 802 Mon Mar 28 12:28:30 1994  David Edelsohn  (edelsohn@npac.syr.edu)
 803
 804         * ppc-opc.c: Define POWER2 as short alias flag.
 805         (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
 806         fsqrt.
 807
 808 Wed Mar 23 12:23:05 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 809
 810         * i960-dis.c (print_insn_i960): Don't read a second word for
 811         opcodes 0, 1, 2 and 3.
 812
 813 Wed Mar 16 15:37:58 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 814
 815         * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
 816
 817 Mon Mar 14 14:53:50 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 818
 819         * m68881-ext.c: Removed; no longer used.
 820         * Makefile.in: Changed accordingly.
 821
 822         * m68k-dis.c (ext_format_68881): Don't declare.
 823         (print_insn_m68k): If an instruction uses place 'i', it uses at
 824         least four fixed bytes.
 825         (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'.  For
 826         extended float, convert to double using floatformat_to_double, not
 827         ieee_extended_to_double, and fetch the data before converting it.
 828
 829 Tue Mar  8 18:12:25 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 830
 831         * mips-opc.c: It's sqrt.s, not sqrt.w.  From
 832         davidj@ICSI.Berkeley.EDU (David Johnson).
 833
 834 Tue Feb  8 16:55:27 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 835
 836         * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
 837         PowerPC uses bdnz[l][a].
 838
 839 Tue Feb  8 00:32:28 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 840
 841         * dis-buf.c, i386-dis.c:  Include sysdep.h.
 842
 843 Mon Feb  7 19:22:23 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 844
 845         * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
 846
 847         * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
 848         by Motorola PowerPC 601 with PPC_OPCODE_601.
 849         * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
 850         Disassemble Motorola PowerPC 601 instructions as well as normal
 851         PowerPC instructions.
 852
 853 Sun Feb  6 07:45:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
 854
 855         * i960-dis.c (reg, mem): Just use a static array instead of
 856         calling xmalloc.
 857
 858 Sat Feb  5 00:04:02 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
 859
 860         * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
 861         condition name index if this is for a negated condition.
 862
 863         * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
 864         Floating point format for 'H' operand is backwards from normal
 865         case (0 == double, 1 == single).  For '4', '6', '7', '9', and '8'
 866         operands (fmpyadd and fmpysub), handle bizarre register
 867         translation correctly for single precision format.
 868
 869         * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
 870         or 'I' operands if the next format specifier is 'M' (fcmp
 871         condition completer).
 872
 873 Feb  4 23:38:03 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 874
 875         * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
 876         single number giving a bitmask for the MB and ME fields of an M
 877         form instruction.  Change NB to accept 32, and turn it into 0;
 878         also turn 0 into 32 when disassembling.  Seperated SH from NB.
 879         (insert_mbe, extract_mbe): New functions.
 880         (insert_nb, extract_nb): New functions.
 881         (SC_MASK): Mask out SA and LK bits.
 882         (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
 883         RA, SI.  Change "liu" and "cau" to use UI rather than SI.  Mark
 884         "bctr" and "bctrl" as accepted by POWER.  Change "rlwimi",
 885         "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
 886         "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
 887         use MBE rather than MB.  Add "mfmq" and "mtmq" POWER instructions.
 888         (powerpc_macros): Define table of macro definitions.
 889         (powerpc_num_macros): Define.
 890
 891         * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
 892         if PPC_OPERAND_NEXT is set.
 893
 894 Sat Jan 22 23:10:07 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 895
 896         * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
 897         char.  Retrieve contents using bfd_getl32 instead of shifting.
 898
 899 Fri Jan 21 19:01:39 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 900
 901         * ppc-opc.c: New file.  Opcode table for PowerPC, including
 902         opcodes for POWER (RS/6000).
 903         * ppc-dis.c: New file.  PowerPC and Power (RS/6000) disassembler.
 904         * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
 905         (CFILES): Add ppc-dis.c.
 906         (ppc-dis.o, ppc-opc.o): New targets.
 907         * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
 908
 909 Mon Jan 17 20:05:49 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
 910
 911         * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
 912         No space before 'u', 'f', or 'N'.
 913
 914 Sun Jan 16 14:20:16 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
 915
 916         * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
 917         farther than we should.
 918
 919         * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
 920
 921 Thu Jan  6 12:38:05 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
 922
 923         * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
 924
 925 Wed Jan  5 11:56:21 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
 926
 927         * i960-dis.c (print_insn_i960): Only read word2 if the instruction
 928         needs it, to prevent reading past the end of a section.
 929
 930 Wed Nov 17 17:20:12 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 931
 932         * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
 933         Removed t,A case for la; always use t,A(b) case.
 934
 935 Mon Nov  8 12:37:36 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 936
 937         From Ted Lemen <mellon@pepper.ncd.com>
 938         * mips-dis.c (print_insn_arg): Handle 'k'.
 939         * mips-opc.c: Make cache use k, not t.
 940
 941 Sun Nov  7 23:52:34 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 942
 943         * alpha-opc.h, alpha-dis.c (print_insn_alpha):  Add
 944         FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
 945         FLOAT_FORMAT_CODE to put out floating point register names.
 946
 947 Mon Nov  1 18:17:51 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 948
 949         * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
 950
 951 Thu Oct 28 17:42:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 952
 953         * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
 954
 955 Wed Oct 27 11:48:01 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 956
 957         * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
 958         larger than 32.  Moved dsxx32 variants first for disassembler.
 959
 960 Mon Oct 25 11:33:14 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
 961
 962         * z8kgen.c, z8k-opc.h: Add full lda information.
 963
 964 Tue Oct 19 12:39:25 1993  Jeffrey A Law  (law@cs.utah.edu)
 965
 966         * hppa-dis.c (print_insn_hppa): Do not emit a space after
 967         movb instructions.  Any necessary space will be emitted by
 968         the code to handle nullification completers.
 969
 970 Wed Oct 13 16:19:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 971
 972         * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
 973
 974 Fri Oct  8 02:34:21 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 975
 976         * alpha-opc.h:  Add ldl_l, fix typo for ldq_u.
 977         * alpha-dis.c (print_insn_alpha):  Add code for PAL_FORMAT_CODE.
 978
 979 Tue Oct  5 17:47:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 980
 981         * mips-opc.c: Correct lwu opcode value (book had it wrong).
 982
 983 Thu Sep 30 11:26:18 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
 984
 985         * z8k-dis.c (FETCH_DATA): get just the right amount of data.
 986         (unpack_instr): Cope with ARG_IMM4M1 type instructions.
 987
 988 Wed Sep 29 16:24:49 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
 989
 990         * m88k-dis.c (m88kdis): comment change.  Remove space after
 991           printing mnemonic.
 992           (printop): handle new arg types DEC and XREG for m88110.
 993
 994 Tue Sep 28 19:20:16 1993  Jeffrey A Law (law@snake.cs.utah.edu)
 995
 996         * hppa-dis.c (print_insn_hppa): Handle 'z' operand
 997         type for absolute branch addresses.  Delete special
 998         "ble" and "be" code in 'W' operand code.
 999
1000 Fri Sep 24 14:08:33 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1001
1002         * mips-opc.c: Set hazard information correctly for branch
1003         likely instructions.
1004
1005 Fri Sep 17 04:41:17 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1006
1007         * alpha-dis.c (print_insn_alpha), alpha-opc.h:  Fix bugs, use
1008         info->fprintf_func for printing and info->print_address_func for
1009         address output.
1010
1011 Wed Sep 15 12:12:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1012
1013         * mips-opc.c: Set INSN_TRAP for tXX instructions.
1014
1015 Thu Sep  9 10:11:27 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1016
1017         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
1018         Corrected second case of "b" for disassembler.
1019
1020 Tue Sep  7 14:25:15 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1021
1022         * mips-dis.c, m88k-dis.c: Don't include libbfd.h.  Changed calls
1023         to BFD swapping routines to correspond to BFD name changes.
1024
1025 Thu Sep  2 10:35:25 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1026
1027         * mips-opc.c: Change div machine instruction to be z,s,t rather
1028         than s,t.  Change div macro to be d,v,t rather than d,s,t.
1029         Likewise for divu, ddiv, ddivu.  Added z,s,t case for drem, dremu,
1030         rem and remu which generates only the corresponding div
1031         instruction.  This is for compatibility with the MIPS assembler,
1032         which only generates the simple machine instruction when an
1033         explicit destination of $0 is used.
1034         * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
1035
1036 Thu Aug 26 17:41:44 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1037
1038         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
1039         WR_31 hazard for bal, bgezal, bltzal.
1040
1041 Thu Aug 26 17:20:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1042
1043         * hppa-dis.c (print_insn_hppa): Use print function
1044         from within the disassemble_info, not fprintf_filtered.
1045
1046 Wed Aug 25 13:51:40 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1047
1048         * hppa-dis.c (print_insn_hppa): Handle '|' like '>'.  (From Jeff
1049         Law, law@cs.utah.edu.)
1050
1051 Mon Aug 23 12:44:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1052
1053         * mips-opc.c ("absu"): Removed.
1054         ("dabs"): Added.
1055
1056 Fri Aug 20 10:52:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1057
1058         * mips-opc.c: Added r6000 and r4000 instructions and macros.
1059         Changed hazard information to distinguish between memory load
1060         delays and coprocessor load delays.
1061
1062 Wed Aug 18 15:39:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1063
1064         * mips-opc.c: li.d uses "T,L", not "S,F".  Added li.s.
1065
1066 Tue Aug 17 09:44:42 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
1067
1068         * configure.in: Don't pass cpu to config.bfd.
1069
1070 Tue Aug 17 12:23:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1071
1072         * m88k-dis.c (m88kdis): Make class unsigned.
1073
1074 Thu Aug 12 15:08:18 1993  Ian Lance Taylor  (ian@cygnus.com)
1075
1076         * alpha-dis.c (print_insn_alpha): One branch format case was
1077         missing the instruction name.
1078
1079 Wed Aug 11 19:29:39 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
1080
1081         * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
1082         Add the arch-specific auxiliary files.
1083         (OFILES): Remove the arch-specific auxiliary files
1084         and use BFD_MACHINES instead of DIS_LIBS.
1085         * configure.in: Set BFD_MACHINES based on --with-targets option.
1086
1087 Thu Aug 12 12:04:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1088
1089         * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b).  Similarly
1090         for swc1.
1091
1092 Sun Aug  8 15:09:30 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1093
1094         * sparc-opc.c: Change CONST to const to deal with gcc
1095         -Dconst=__const -traditional.
1096
1097 Fri Aug  6 10:58:55 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1098
1099         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
1100         coprocessor instructions out of #if 0, and made them use new
1101         argument type "C".
1102
1103 Thu Aug  5 17:11:06 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1104
1105         * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
1106
1107 Fri Jul 30 18:48:15 1993  John Gilmore  (gnu@cygnus.com)
1108
1109         * sparc-opc.c:  Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
1110         instruction, for use by the disassembler.
1111
1112         * sparc-dis.c (SEX):  Add sign extension macro.  Replace many
1113         hand-coded sign extensions that depended on 32-bit host ints.
1114         FIXME, we still depend on big-endian host bitfield ordering.
1115         (sparc_print_insn):  Set the insn_info_valid field, and the
1116         other fields that describe the instruction being printed.
1117
1118 Tue Jul 27 17:04:58 1993  Jim Wilson  (wilson@sphagnum.cygnus.com)
1119
1120         * sparc-opc.c (call): Accept all 6 addressing modes valid for
1121         `jmp' instead of just one of them.
1122
1123 Wed Jul 21 11:43:32 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
1124
1125         * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
1126         (fput_fp_reg_r): Renamed from fput_reg_r.
1127         (fput_fp_reg): New function.
1128         (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
1129
1130         * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
1131
1132         * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
1133
1134 Mon Jul 19 13:52:21 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
1135
1136         * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
1137
1138         * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
1139         don't output a space.
1140
1141         * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
1142
1143 Sun Jul 18 16:30:02 1993  Jim Kingdon  (kingdon@rtl.cygnus.com)
1144
1145         * mips-opc.c: New file, containing opcode table from
1146         ../include/opcode/mips.h.
1147         * Makefile.in: Add it.
1148
1149 Thu Jul 15 12:37:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1150
1151         * m88k-dis.c: New file, moved in from gdb and changed to use the
1152         new dis-asm.h disassembler interface.
1153         * Makefile.in (DIS_LIBS): Added m88k-dis.o.
1154         (m88k-dis.o): New target.
1155
1156 Tue Jul 13 10:04:16 1993  Ian Lance Taylor  (ian@cygnus.com)
1157
1158         * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
1159         argument string const char * to correspond to opcode/mips.h.
1160
1161 Tue Jul  6 15:18:37 1993  Ian Lance Taylor  (ian@cygnus.com)
1162
1163         * mips-dis.c: Updated to account for name changes in new version
1164         of opcode/mips.h.
1165         * Makefile.in: Added header file dependencies.
1166
1167 Sat Jul  3 23:47:56 1993  Doug Evans  (dje@canuck.cygnus.com)
1168
1169         * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
1170
1171 Thu Jul  1 12:23:38 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1172
1173         * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
1174         extend, rather than shifts.
1175
1176 Sun Jun 20 20:56:56 1993  Ken Raeburn  (raeburn@poseidon.cygnus.com)
1177
1178         * Makefile.in: Undo 15 June change.
1179
1180 Fri Jun 18 14:15:15 1993  Per Bothner  (bothner@deneb.cygnus.com)
1181
1182         * m68k-dis.c (print_insn_arg):  Change return value to byte count
1183         or error code.
1184         * m68k-dis.c:  Re-write to detect invalid operands before
1185         printing anything, so we can handle this the same way we
1186         handle invalid opcodes.
1187
1188 Thu Jun 17 15:01:36 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
1189
1190         * sh-dis.c, sh-opc.h: Understand some more opcodes.
1191
1192 Wed Jun 16 13:48:05 1993  Ian Lance Taylor  (ian@cygnus.com)
1193
1194         * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
1195         header files.
1196
1197 Tue Jun 15 21:45:26 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1198
1199         * sparc-dis.c: Don't declare qsort, since sysdep.h might.
1200
1201         * configure.in: Do make sysdep.h link.
1202         * Makefile.in: Search ../include.  Don't search ../bfd.
1203
1204 Tue Jun 15 13:36:10 1993  Stu Grossman  (grossman@cygnus.com)
1205
1206         Changes from Jeff Law, law@cs.utah.edu:
1207         * hppa-dis.c: Fix typo.  'a' and 'd' were reversed.
1208         Do not print a space before the completers specified by
1209         'a' and 'd'.
1210
1211 Fri Jun 11 18:40:21 1993  Ken Raeburn  (raeburn@cygnus.com)
1212
1213         * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
1214         defined, since gdb has been fixed.
1215
1216         Changes from Jeff Law, law@cs.utah.edu:
1217         * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
1218         fput_reg_r, fput_creg, fput_const, and fputs_filtered should
1219         be a *disassemble_info, not a *FILE.
1220         * hppa-dis.c: Support 'd', '!', and 'a'.
1221         * hppa-dis.c: Support 's' to extract a 2 bit space register.
1222         * hppa-dis.c: Delete cases which are no longer needed.
1223
1224 Fri Jun 11 07:53:48 1993  Jim Kingdon  (kingdon@cygnus.com)
1225
1226         * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
1227
1228 Tue Jun  8 12:25:01 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
1229
1230         * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
1231         H8/300-H opcodes.
1232
1233 Mon Jun  7 12:58:49 1993  Per Bothner  (bothner@rtl.cygnus.com)
1234
1235         * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
1236         * configure.in:  No longer need to configure to get sysdep.h.
1237
1238 Thu Jun  3 15:56:49 1993  Stu Grossman  (grossman@cygnus.com)
1239
1240         * Patches from Jeffrey Law <law@cs.utah.edu>.
1241         * hppa-dis.c: Support 'I', 'J', and 'K' in output
1242         templates for 1.1 FP computational instructions.
1243
1244 Tue May 25 13:05:48 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1245
1246         * h8500-dis.c (print_insn_h8500): Address argument is type
1247         bfd_vma.
1248         * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
1249         Ditto.
1250
1251         * h8500-opc.h (addr_class_type): No comma at end of enumerator.
1252         * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
1253
1254         * sparc-dis.c (compare_opcodes): Move static declaration to
1255         top-level.
1256
1257 Fri May 21 14:17:37 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1258
1259         * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
1260         instruction, remove unimp hack from 'l' argument.
1261
1262 Wed May 19 15:35:54 1993  Stu Grossman  (grossman@cygnus.com)
1263
1264         * z8k-dis.c (fetch_data):  Use unsigned char to make ancient gcc's
1265         happy.
1266
1267 Fri May 14 15:22:46 1993  Ian Lance Taylor  (ian@cygnus.com)
1268
1269         * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
1270         * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
1271         instructions.
1272
1273 Fri May 14 00:09:14 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1274
1275         * hppa-dis.c: Include dis-asm.h before sysdep.h.  Changed some
1276         arrays of string pointers to 2-d arrays of chars, to save
1277         space.
1278
1279 Thu May  6 20:51:17 1993  Fred Fish  (fnf@cygnus.com)
1280
1281         * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
1282         Cast second arg to read_memory_func to "bfd_byte *", as necessary.
1283
1284 Tue May  4 20:31:10 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1285
1286         * hppa-dis.c: New file from Utah, adapted to new disassembler
1287         calling interface.
1288         * Makefile.in: Include it.
1289
1290 Mon Apr 26 18:17:42 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1291
1292         * sh-dis.c, sh-opc.h: New files.
1293
1294 Fri Apr 23 18:51:22 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1295
1296         * alpha-dis.c, alpha-opc.h: New files.
1297
1298 Tue Apr  6 12:54:08 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1299
1300         * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
1301         value.
1302
1303 Mon Apr  5 17:37:37 1993  John Gilmore  (gnu@cygnus.com)
1304
1305         * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
1306
1307 Fri Apr  2 07:24:27 1993  Ian Lance Taylor  (ian@cygnus.com)
1308
1309         * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
1310         const.
1311
1312 Thu Apr  1 11:20:43 1993  Jim Kingdon  (kingdon@cygnus.com)
1313
1314         * sparc-dis.c: Use fprintf_func a few places where I forgot,
1315         and double percent signs a few places.
1316
1317         * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
1318
1319         * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
1320         Use info->print_address_func not print_address.
1321
1322         * dis-buf.c (generic_print_address): New function.
1323
1324 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1325
1326         * Makefile.in: Add sparc-dis.c.
1327         sparc-dis.c: New file, merges binutils and gdb versions as follows:
1328         From GDB:
1329             Add `add' instruction to the set that get checked
1330             for a preceding `sethi' in order to print an absolute address.
1331             * (print_insn):  Disassembly prefers real instructions.
1332             (is_delayed_branch):  Speed up.
1333             * sparc-opcode.h: Add ALIAS bit to aliases.  Fix up opcode tables.
1334             Still missing some float ops, and needs testing.
1335             * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
1336             F_ALIAS.  Use printf, not fprintf, when not passing a file
1337             pointer...
1338             (compare_opcodes): Check that identical instructions have
1339             identical opcodes, complain otherwise.
1340         From binutils:
1341             * New 'm' arg.
1342             * Include reg_names.
1343         From neither:
1344             Use dis-asm.h/read_memory_func interface.
1345
1346 Wed Mar 31 20:49:06 1993  K. Richard Pixley  (rich@rtl.cygnus.com)
1347
1348         * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
1349           deliberately return non-zero to setjmp from longjmp.  Otherwise
1350           this code fails to compile.
1351
1352 Wed Mar 31 17:04:31 1993  Stu Grossman  (grossman@cygnus.com)
1353
1354         * m68k-dis.c:  Fix prototype for fetch_arg().
1355
1356 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1357
1358         * dis-buf.c: New file, for new read_memory_func interface.
1359         Makefile.in (OFILES): Include it.
1360         m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
1361         Use new read_memory_func interface.
1362
1363 Mon Mar 29 14:02:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1364
1365         * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
1366         * h8500-opc.h: Fix couple of opcodes.
1367
1368 Wed Mar 24 02:03:36 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
1369
1370         * Makefile.in: add dvi & installcheck targets
1371
1372 Mon Mar 22 18:55:04 1993  John Gilmore  (gnu@cygnus.com)
1373
1374         * Makefile.in:  Update for h8500-dis.c.
1375
1376 Fri Mar 19 14:27:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1377
1378         * h8500-dis.c, h8500-opc.h: New files
1379
1380 Thu Mar 18 14:12:37 1993  Per Bothner  (bothner@rtl.cygnus.com)
1381
1382         * mips-dis.c, z8k-dis.c:  Converted to use interface defined in
1383         ../include/dis-asm.h.
1384         * m68k-dis.c:  New file (merge of ../binutils/m68k-pinsn.c
1385         and ../gdb/m68k-pinsn.c).
1386         * i386-dis.c:  New file (merge of ../binutils/i386-pinsn.c
1387         and ../gdb/i386-pinsn.c).
1388         * m68881-ext.c:  New file.  Moved definition of
1389         ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
1390         * Makefile.in:  Adjust for new files.
1391         * i386-dis.c:  Patches from John Hassey (hassey@dg-rtp.dg.com).
1392         * m68k-dis.c:  Recognize '9' placement code, so (say) pflush
1393         can be dis-assembled.
1394
1395 Wed Feb 17 09:19:47 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1396
1397         * mips-dis.c (print_insn_arg): Now returns void.
1398
1399 Mon Jan 11 16:09:16 1993  Fred Fish  (fnf@cygnus.com)
1400
1401         * mips-dis.c (ansidecl.h):  Include for benefit of sysdep.h
1402         files that use the macros.
1403
1404 Thu Jan  7 13:15:17 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1405
1406         * mips-dis.c: New file, from gdb/mips-pinsn.c.
1407         * Makefile.in (DIS_LIBS): Added mips-dis.o.
1408         (CFILES): Added mips-dis.c.
1409
1410 Thu Jan  7 07:36:33 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1411
1412         * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
1413         * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
1414
1415 Tue Dec 22 15:42:44 1992  Per Bothner  (bothner@rtl.cygnus.com)
1416
1417         * Makefile.in:  Improve *clean rules.
1418         * configure.in:  Allow a default host.
1419
1420 Tue Nov 17 19:53:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1421
1422         * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
1423         files include other sysdep files
1424
1425 Thu Nov 12 16:10:37 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1426
1427         * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
1428
1429 Fri Oct  9 04:56:05 1992  John Gilmore  (gnu@cygnus.com)
1430
1431         * configure.in:  For host support, use ../bfd/configure.host
1432         so it stays in sync with the ../bfd/hosts database.
1433
1434 Thu Oct  1 23:38:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1435
1436         * configure.in: use cpu-vendor-os triple instead of nested cases
1437
1438 Wed Sep 30 16:09:20 1992  Michael Werner  (mtw@cygnus.com)
1439
1440         * z8k-dis.c (unparse_instr): fix bug where opcode returned was
1441         *always* the wrong one.
1442
1443 Wed Sep 30 07:42:17 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1444
1445         * z8kgen.c: added copyright info
1446
1447 Tue Sep 29 12:20:21 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1448
1449         * z8k-dis.c (unparse_instr): prettier tabs
1450         * z8kgen.c -> z8k-opc.h: bug fixes in tables
1451
1452 Fri Sep 25 12:50:32 1992  Stu Grossman  (grossman at cygnus.com)
1453
1454         * configure.in:  Add ncr* configuration.
1455         * z8k-dis.c (struct instr_data_s):  Make instr_asmsrc char to make
1456         picayune ANSI compilers happy.
1457
1458 Sep 20 08:50:55 1992  Fred Fish  (fnf@cygnus.com)
1459
1460         * configure.in (i386):  Make i386 and i486 synonymous for now.
1461         * configure.in (i[34]86-*-sysv4):  Add my_host definition.
1462
1463 Fri Sep 18 17:01:23 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1464
1465         * Makefile.in (install): Fix typo.
1466
1467 Fri Sep 18 02:04:24 1992  John Gilmore  (gnu@cygnus.com)
1468
1469         * Makefile.in (make):  Remove obsolete crud.
1470         (sparc-opc.o):  Avoid Sun Make VPATH bug.
1471
1472 Tue Sep  8 17:29:27 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
1473
1474         * Makefile.in: since there are no SUBDIRS, remove rule and
1475         references of subdir_do.
1476
1477 Tue Sep  8 17:02:58 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1478
1479         * Makefile.in (install): Get the library name right here too.
1480         Don't install bfd.h, since it's unrelated to this library.  No
1481         subdirs to recurse into, either.
1482         (CFILES): The source file has a .c suffix, not .o.
1483
1484         * sparc-opc.c: New file, moved from BFD.
1485         * Makefile.in (OFILES): Build it.
1486
1487 Thu Sep  3 16:59:20 1992  Michael Werner  (mtw@cygnus.com)
1488
1489         * z8k-dis.c: fixed forward refferences of some declarations.
1490
1491 Mon Aug 31 16:09:45 1992  Michael Werner  (mtw@cygnus.com)
1492
1493         * Makefile.in: get the name of the library right
1494
1495 Mon Aug 31 13:47:35 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1496
1497         * z8k-dis.c: knows how to disassemble z8k stuff
1498         * z8k-opc.h: new file full of z8000 opcodes
1499
1500 \f
1501 Local Variables:
1502 version-control: never
1503 End: