2 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
4 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
5 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
7 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
11 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
13 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
14 Add tx49 insns and configury.
17 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
19 * mips-opc.c (ffc, ffs): Fix mask.
22 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
24 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
28 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
30 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
32 Added VR5400 instructions.
33 (N5): New cpu-id macro.
35 (WR_HILO, RD_HILO, MOD_HILO): New macros.
37 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
39 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
40 (WR_HILO, RD_HILO, MOD_HILO): New macros.
42 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
44 * v850-dis.c (disassemble): Replace // with /* ... */
46 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
48 * sparc-opc.c: Add wr & rd for v9a asr's.
49 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
50 (v9a_asr_reg_names): New variable.
51 Patch from David Miller <davem@vger.rutgers.edu>.
53 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
55 * sparc-opc.c (v9notv9a): New insn type.
56 (IMPDEP): Move to the end to not conflict with edge8 et al.
57 Patch from David Miller <davem@vger.rutgers.edu>.
59 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
61 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
63 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
65 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
67 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
69 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
70 of disassemble_info structure to determine if an overlay address
71 has a matching symbol in low memory.
73 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
74 new symbol_at_address_func field in disassemble_info structure.
76 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
78 * v850-opc.c (extract_d22): Use signed arithmatic.
80 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
82 * mips-opc.c: Three op mult is not an ISA insn.
84 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
86 * mips-opc.c: Fix formatting.
88 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
90 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
91 than assuming that char is signed. Explicitly sign extend 16 bit
92 values, rather than assuming that short is 16 bits.
93 (OP_sI, OP_J, OP_DIR): Likewise.
96 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
98 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
102 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
104 * v850-opc.c: Fix typo in comment.
106 * v850-dis.c (disassemble): Add test of processor type when
109 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
111 * configure.in: Use a diversion to set enable_shared before the
112 arguments are parsed.
113 * configure: Rebuild.
115 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
117 * m68k-opc.c (TBL1): Use ! rather than `.
118 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
120 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
122 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
124 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
126 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
129 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
130 * aclocal.m4: Rebuild with new libtool.
131 * configure: Rebuild.
134 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
136 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
139 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
141 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
143 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
145 * v850-opc.c (v850_opcodes): Further rearrangements.
148 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
150 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
153 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
155 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
158 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
160 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
162 * mips16-opc.c: Added mips16 sdbbp.
165 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
167 * v850-opc.c: Initialise processors field of v850_opcode structure.
170 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
172 Merge changes from Martin Hunt:
174 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
176 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
177 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
178 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
180 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
182 * d30v-dis.c (print_insn): First operand of d*i (delayed
183 branch) instructions is relative.
185 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
186 (d30v_operand_table): Add IMM6S3 type.
187 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
189 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
190 and cmp instructions.
192 * d30v-opc.c: Correct entries for repeat*, and sat*.
193 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
194 types. Correct several formats.
196 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
198 * d30v-opc.c (pre_defined_registers): Change control registers.
200 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
201 SHORT_C2. Manual was incorrect.
203 * d30v-dis.c (lookup_opcode): Return value now indicates
204 if an opcode has a short and a long form. Used for deciding
205 to append a ".s" or ".l".
206 (print_insn): Append a ".s" to an instruction if it is
207 the short form and ".l" if it is a long form. Do not append
208 anything if the instruction has only one possible size.
210 * d30v-opc.c: Change mulx2h to require an even register.
211 New form: SHORT_A2; a SHORT_A form that needs an even
212 register as the first operand.
214 * d30v-dis.c (print_insn_d30v): Fix problem where the last
215 instruction was not being disassembled if there were an odd
216 number of instructions.
218 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
222 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
224 * v850-dis.c (disassemble): Improved display of register lists.
227 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
229 * sparc-opc.c (sparc_opcodes): Fix assembler args to
230 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
231 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
232 fandnot1s, fandnot2s.
234 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
236 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
238 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
240 * cgen-asm.c (cgen_parse_address): New argument resultp.
242 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
244 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
246 * mn10200-dis.c (disassemble): PC relative instructions are
247 relative to the next instruction, not the current instruction.
249 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
251 * v850-dis.c (disassemble): Only signed extend values that are not
252 returned by extract functions.
253 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
255 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
257 * v850-opc.c: Update comments. Remove use of
258 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
260 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
262 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
264 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
266 * configure: Rebuilt with latest devo autoconf for NT support.
268 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
270 * v850-dis.c (disassemble): Use curly brace syntax for register
273 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
274 where r0 is being used as a destination register.
277 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
279 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
283 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
285 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
286 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
287 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
288 Add insns to access SGR and DBR.
289 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
292 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
294 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
297 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
299 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
300 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
303 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
305 * configure (cgen_files): Add support for v850e target.
306 * configure.in (cgen_files): Add support for v850e target.
308 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
310 * configure (cgen_files): Add support for v850eq target.
311 * configure.in (cgen_files): Add support for v850eq target.
314 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
316 * configure.in (bfd_arc_arch): Add.
317 * configure: Rebuild.
318 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
319 * Makefile.in: Rebuild.
320 * arc-dis.c, arc-opc.c: New files.
321 * disassemble.c (ARCH_all): Define ARCH_arc.
322 (disassembler): Add ARC support.
324 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
327 * v850-dis.c (disassemble): Add support for v850EQ instructions.
329 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
330 (v850_opcodes): Add v850EQ instructions.
332 * v850-dis.c (disassemble): Add support for v850E instructions.
334 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
335 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
336 insert_spe, extract_spe): New Functions.
337 (v850_opcodes): Add v850E instructions.
340 * v850-opc.c: Reorganised and re-layed out to improve readability
343 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
345 * configure: Rebuild with autoconf 2.12.1.
347 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
349 * aclocal.m4, configure: Rebuild with new automake patches.
351 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
353 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
354 * acinclude.m4: Just include acinclude.m4 from BFD.
355 * aclocal.m4, configure: Rebuild.
357 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
359 * Makefile.am: New file, based on old Makefile.in.
360 * acconfig.h: New file.
361 * acinclude.m4: New file.
362 * stamp-h.in: New file.
363 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
364 Removed shared library handling; now handled by libtool. Replace
365 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
366 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
367 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
368 handling in AC_OUTPUT.
369 * dep-in.sed: Change .o to .lo.
370 * Makefile.in: Now built with automake.
371 * aclocal.m4: Now built with aclocal.
372 * config.in, configure: Rebuild.
374 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
376 * mips-opc.c: Fix typo/thinko in "eret" instruction.
379 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
381 * mips-opc.c: Fix coding of mtsa.
384 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
386 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
388 * sparc-dis.c (sorted_opcodes): New static local.
389 (struct opcode_hash): `opcode' is pointer to const element.
390 (build_hash): First arg is now table of sorted pointers.
391 (print_insn_sparc): Sort opcodes by sorting table of pointers.
392 (compare_opcodes): Update.
394 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
396 * cgen-opc.c: #include <ctype.h>.
397 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
398 Handle case insensitive hashing.
399 (hash_keyword_value): Change type of `value' to unsigned int.
401 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
403 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
404 precision FP, mark it as such. Likewise for double precision
405 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
408 (mips_builtin_opcodes): Remove non-existant r5900 instructions
412 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
414 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
415 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
418 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
420 * ppc-opc.c (extract_nsi): make unsigned expression signed before
422 (UNUSED): remove one level of parens, so MSVC doesn't choke on
423 nesting depth when all the macros are expanded.
425 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
427 * sparc-opc.c: The fcmp v9a instructions take an integer register
428 as a destination, not a floating point register. From Christian
429 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
431 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
433 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
434 syntax. From Roman Hodek
435 <rnhodek@faui22c.informatik.uni-erlangen.de>.
437 * i386-dis.c (twobyte_has_modrm): Fix pand.
439 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
441 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
443 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
445 * arm-dis.c: Add prototypes for arm_decode_shift and
448 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
450 * mips-opc.c: Add r3900 insns.
452 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
454 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
455 print delay slot instructions on the same line. When using a PC
456 relative load, add a comment with the value being loaded if it can
459 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
461 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
462 to pushS/popS for segment regs and byte constant so that
463 pushw/popw printed when in 16 bit data mode.
465 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
466 print cbtw, cwtd in 16 bit data mode.
467 * i386-dis.c (putop): extra case W to support above.
469 * i386-dis.c (print_insn_x86): print addr32 prefix when given
470 address size prefix in 16 bit address mode.
472 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
474 * sh-dis.c: Reindent. Rename local variable fprintf to
477 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
479 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
481 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
483 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
485 * mips16-opc.c (mip16_opcodes): same.
487 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
489 * m68k-opc.c (moveb): Change $d to %d.
491 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
493 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
494 (twobyte_has_modrm): Likewise.
496 (OP_MMX, OP_EM, OP_MS): New static functions.
498 * i386-dis.c: Revert patch of April 4. The output now matches
501 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
503 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
506 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
508 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
510 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
512 * Makefile.in (install): Depend upon installdirs.
513 (installdirs): New target.
515 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
517 From Thomas Graichen <graichen@rzpd.de>:
518 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
519 * configure: Rebuild.
521 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
523 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
524 Delete string{,s}.h support.
526 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
528 * cgen-asm.c (cgen_parse_operand_fn): New global.
529 (cgen_parse_{{,un}signed_integer,address}): Update call to
530 cgen_parse_operand_fn.
531 (cgen_init_parse_operand): New function.
532 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
533 from cgen_asm_init_parse.
534 (m32r_cgen_assemble_insn): New operand `errmsg'.
535 Delete call to as_bad, return error message to caller.
536 (m32r_cgen_asm_hash_keywords): #if 0 out.
538 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
540 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
542 [case 'J']: Fix typo in register name.
544 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
546 * configure.in: Substitute SHLIB_LIBS.
547 * configure: Rebuild.
548 * Makefile.in (SHLIB_LIBS): New variable.
549 ($(SHLIB)): Use $(SHLIB_LIBS).
551 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
553 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
555 * cgen-opc.c (hash_keyword_name): Improve algorithm.
557 * disassemble.c (disassembler): Handle m32r.
559 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
561 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
562 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
563 * Makefile.in (CFILES): Add them.
564 (ALL_MACHINES): Add them.
565 (dependencies): Regenerate.
566 * configure.in (cgen_files): New variable.
567 (bfd_m32r_arch): Add entry.
568 * configure: Regenerate.
570 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
572 * configure.in: Correct file names for bfd_mn10[23]00_arch.
573 * configure: Rebuild.
575 * Makefile.in: Rebuild dependencies.
577 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
579 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
582 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
584 * Branched binutils 2.8.
586 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
588 * m10200-dis.c: Rename from mn10200-dis.c.
589 * m10200-opc.c: Rename from mn10200-opc.c.
590 * m10300-dis.c: Rename from mn10300-dis.c
591 * m10300-opc.c: Rename from mn10300-opc.c.
592 * Makefile.in: Update accordingly.
594 * mips16-opc.c: Add mul and dmul macros.
596 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
598 * makefile.vms: Update CFLAGS, add clean target.
600 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
602 * mips-opc.c: Add "wait". From Ralf Baechle
603 <ralf@gnu.ai.mit.edu>.
605 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
606 * configure, config.in: Rebuild.
607 * sysdep.h: Include <stdlib.h> if it exists.
608 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
610 * Makefile.in: Rebuild dependencies.
612 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
614 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
615 Andrew Bray <andy@madhouse.demon.co.uk>.
617 * mips-opc.c: Add cast when setting mips_opcodes.
619 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
621 * v850-dis.c (disassemble): Fix sign extension problem.
622 * v850-opc.c (extract_d*): Fix sign extension problems to make
623 disassembly calculate branch offsets correctly.
625 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
627 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
629 * mips-opc.c: Add dctr and dctw.
632 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
634 * d30v-dis.c (print_insn): Change the way signed constants
637 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
639 * Makefile.in (BFD_H): New variable.
640 (HFILES): New variable.
641 (CFILES): Add all C files.
642 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
643 Delete old dependencies, and build new ones.
644 * dep-in.sed: New file.
646 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
648 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
650 start-sanitize-coldfire
651 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
653 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
656 end-sanitize-coldfire
657 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
659 * mn10200-opc.c: Change "trap" to "syscall".
660 * mn10300-opc.c: Add new "syscall" instruction.
662 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
664 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
665 mulul insns on the coldfire.
667 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
669 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
670 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
671 (print_insn_little_arm): Likewise.
673 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
675 Based on patches from H.J. Lu <hjl@lucon.org>:
676 * i386-dis.c (fetch_data): Add prototype.
677 * m68k-dis.c (fetch_data): Add prototype.
678 (dummy_print_address): Add prototype. Make static.
679 * ppc-opc.c (valid_bo): Add prototype.
680 * sparc-dis.c (build_hash_table): Add prototype.
681 (is_delayed_branch, compute_arch_mask): Add prototypes.
682 (print_insn_sparc): Make several local variables const.
683 (compare_opcodes): Change arguments to const PTR. Add prototype.
684 * sparc-opc.c (arg): Change name field to be const.
685 (lookup_name, lookup_value): Add prototypes. Change table and
686 name parameters to be const.
687 (sparc_encode_asi): Change name parameter to be const.
688 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
689 (sparc_encode_sparclet_cpreg): Likewise.
690 (sparc_decode_asi): Change return type to be const.
691 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
692 (sparc_decode_sparclet_cpreg): Likewise.
694 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
696 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
697 Solaris doesn't like the combined options, and the -f is
699 (stamp-tshlink, install): Likewise.
701 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
703 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
706 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
708 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
710 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
712 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
715 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
717 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
720 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
722 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
724 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
726 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
729 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
731 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
732 floatformat_to_double to make portable.
733 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
736 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
738 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
739 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
741 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
743 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
744 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
747 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
749 * tic80-opc.c (LSI_SCALED): Renamed from this ...
750 (OFF_SL_BR_SCALED): ... to this, and added the flag
751 TIC80_OPERAND_BASEREL to the flags word.
752 (tic80_opcodes): Replace all occurances of LSI_SCALED with
756 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
758 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
759 Change mips_opcodes from const array to a pointer,
760 and change bfd_mips_num_opcodes from const int to int,
761 so that we can increase the size of the mips opcodes table
765 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
767 * tic80-opc.c (tic80_predefined_symbols): Revert change to
768 store BITNUM values in the table in one's complement form
769 to match behavior when assembler is given a raw numeric
770 value for a BITNUM operand.
771 * tic80-dis.c (print_operand_bitnum): Ditto.
775 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
777 * d30v-opc.c: Removed references to FLAG_X.
780 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
782 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
785 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
787 * Makefile.in: Added d30v object files.
788 * configure: (bfd_d30v_arch) Rebuilt.
789 * configure.in: (bfd_d30v_arch) Added new case.
790 * d30v-dis.c: New file.
791 * d30v-opc.c: New file.
792 * disassemble.c (disassembler) Add entry for d30v.
796 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
798 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
799 representations for the floating point BITNUM values.
801 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
803 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
804 in the table in one's complement form, as they appear in the
806 (tic80_symbol_to_value): Use macros to access predefined
808 (tic80_value_to_symbol): Ditto.
809 (tic80_next_predefined_symbol): New function.
810 * tic80-dis.c (print_operand_bitnum): Remove code that did
811 one's complement for BITNUM values.
815 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
817 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
820 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
822 * makefile.vms: Remove 8 bit characters. Update to latest
825 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
827 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
829 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
831 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
832 (IMM24_PCREL): Likewise.
834 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
836 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
837 address for an extended PC relative instruction that is not a
840 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
842 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
846 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
848 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
849 (tic80_opcodes): Sort entries so that long immediate forms
850 come after short immediate forms, making it easier for
851 assembler to select the right one for a given operand.
854 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
856 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
858 (print_insn_mips16): Likewise.
861 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
863 * mips-opc.c: add r5900.
867 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
869 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
870 a symbol class that restricts translation to just that
871 class (general register, condition code, etc).
873 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
875 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
876 and REG_DEST_E for register operands that have to be
877 an even numbered register. Add REG_FPA for operands that
878 are one of the floating point accumulator registers.
879 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
880 (tic80_opcodes): Change entries that need even numbered
881 register operands to use the new operand table entries.
882 Add "or" entries that are identical to "or.tt" entries.
885 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
887 * mips16-opc.c: Add new cases of exit instruction for
889 * mips-dis.c (print_mips16_insn_arg): Display floating point
890 registers in operands of exit instruction. Print `$' before
891 register names in operands of entry and exit instructions.
894 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
896 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
897 pairs for all predefined symbols recognized by the assembler.
898 Also used by the disassembling routines.
899 (tic80_symbol_to_value): New function.
900 (tic80_value_to_symbol): New function.
901 * tic80-dis.c (print_operand_control_register,
902 print_operand_condition_code, print_operand_bitnum):
903 Remove private tables and use tic80_value_to_symbol function.
906 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
908 * d10v-dis.c (print_operand): Change address printing
909 to correctly handle PC wrapping. Fixes PR11490.
911 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
913 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
916 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
918 * mips-dis.c (print_insn_mips16): Set insn_info information.
919 (print_mips16_insn_arg): Likewise.
921 * mips-dis.c (print_insn_mips16): Better handling of an extend
922 opcode followed by an instruction which can not be extended.
924 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
926 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
927 coldfire moveb instruction to not allow an address register as
928 destination. Although the documentation does not indicate that
929 this is invalid, experiments uncovered unexpected behavior.
930 Added a comment explaining the situation. Thanks to Andreas
931 Schwab for pointing this out to me.
934 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
936 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
937 entries are presorted so that entries with the same mnemonic are
938 adjacent to each other in the table. Sort the entries for each
939 instruction so that this is true.
942 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
944 * m68k-dis.c: Include <libiberty.h>.
945 (print_insn_m68k): Sort the opcode table on the most significant
946 nibble of the opcode.
949 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
951 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
952 "vsub", "vst", "xnor", and "xor" instructions.
953 (V_a1): Renamed from V_a, msb of accumulator reg number.
954 (V_a0): Add macro, lsb of accumulator reg number.
956 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
958 * tic80-dis.c (print_insn_tic80): Broke excessively long
959 function up into several smaller ones and arranged for
960 the instruction printing function to be callable recursively
961 to print vector instructions that have both a load and a
962 math instruction packed into a single opcode.
963 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
964 to explain why it comes after the other vector opcodes.
967 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
969 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
970 move insns to handle immediate operands.
972 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
974 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
975 fix operand mask in the "moveml" entries for the coldfire.
978 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
980 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
981 New macros for building vector instruction opcodes.
982 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
983 FMT_LI, which were unused. The field is now a flags field.
984 Remove some opcodes that are possible, but illegal, such
985 as long immediate instructions with doubles for immediate
986 values. Add "vadd" and "vld" instructions.
988 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
990 * tic80-opc.c (tic80_operands): Reorder some table entries to make
991 the order more logical. Move the shift alias instructions ("rotl",
992 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
993 interspersed with the regular sr.x and sl.x instructions. Add
994 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
995 "sub", "subu", "swcr", and "trap".
997 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
999 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
1000 (OFF_SL_PC): Renamed from OFF_SL.
1001 (OFF_SS_BR): New operand type for base relative operand.
1002 (OFF_SL_BR): New operand type for base relative operand.
1003 (REG_BASE): New operand type for base register operand.
1004 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
1005 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
1006 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
1008 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
1009 10 char field, padded with spaces on rhs, rather than a string
1010 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
1011 than old TIC80_OPERAND_RELATIVE. Add support for new
1012 TIC80_OPERAND_BASEREL flag bit.
1014 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
1016 * tic80-dis.c (print_insn_tic80): Print floating point operands
1018 * tic80-opc.c (SPFI): Add single precision floating point
1019 immediate operand type.
1020 (ROTATE): Add rotate operand type for shifts.
1021 (ENDMASK): Add for shifts.
1022 (n): Macro for the 'n' bit.
1023 (i): Macro for the 'i' bit.
1024 (PD): Macro for the 'PD' field.
1025 (P2): Macro for the 'P2' field.
1026 (P1): Macro for the 'P1' field.
1027 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
1031 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
1033 * mn10200-dis.c (disassemble): Mask off unwanted bits after
1034 adding in current address for pc-relative operands.
1036 start-sanitize-tic80
1037 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
1039 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
1040 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
1041 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
1042 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
1043 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
1044 REG_BASE_M_SI, REG_BASE_M_LI respectively.
1045 (REG_SCALED, LSI_SCALED): New operand types.
1046 (E): New macro for 'E' bit at bit 27.
1047 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
1048 opcodes, including the various size flavors (b,h,w,d) for
1049 the direct load and store instructions.
1051 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
1053 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
1055 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
1056 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
1057 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
1058 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
1059 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
1060 masks with "MASK_* & ~M_*" to get the M bit reset.
1061 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
1063 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
1065 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
1066 correctly. Add support for printing TIC80_OPERAND_BITNUM and
1067 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
1069 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
1070 CC, SICR, and LICR table entries.
1071 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
1072 "bcnd", and "brcr" opcodes.
1075 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
1077 * ppc-opc.c (powerpc_operands): Make comment match the
1078 actual fields (no shift field).
1079 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
1080 start-sanitize-tic80
1081 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
1082 partial implementation, work in progress.
1083 * tic80-opc.c (tic80_operands): Begin construction operands table.
1084 (tic80_opcodes): Continue populating opcodes table and start
1085 filling in the operand indices.
1086 (tic80_num_opcodes): Add this.
1089 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
1091 * m68k-opc.c: Add #B case for moveq.
1093 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
1095 * mn10300-dis.c (disassemble): Make sure all variables are initialized
1096 before they are used.
1098 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
1100 * v850-opc.c (v850_opcodes): Put curly-braces around operands
1101 for "breakpoint" instruction.
1103 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
1105 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
1106 (dep): Use ALL_CFLAGS rather than CFLAGS.
1108 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1110 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
1113 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
1115 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
1116 start-sanitize-tic80
1117 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
1120 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
1122 * mips16-opc.c: Add "abs".
1124 start-sanitize-tic80
1125 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
1127 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
1128 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
1129 (disassembler): Add bfd_arch_tic80 support to set disassemble
1130 to print_insn_tic80.
1131 * tic80-dis.c (print_insn_tic80): Add stub.
1133 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
1135 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
1136 * configure: Regenerate with autoconf.
1137 * tic80-dis.c: Add file.
1138 * tic80-opc.c: Add file.
1141 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1143 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
1145 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
1147 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
1148 (mn10200_opcodes): Use it for some logicals and btst insns.
1149 Add "break" and "trap" instructions.
1151 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
1153 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
1155 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
1157 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
1158 relative load or add now depends upon whether the instruction is
1161 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
1163 * mn10200-dis.c: Finish writing disassembler.
1164 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
1165 Fix mask for "jmp (an)".
1167 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
1168 handle endianness issues for mn10300.
1170 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
1172 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
1174 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
1175 instruction. Fix opcode field for "movb (imm24),dn".
1177 * mn10200-opc.c (mn10200_operands): Fix insertion position
1180 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
1182 * mn10200-opc.c: Create mn10200 opcode table.
1183 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
1184 but moving along nicely.
1186 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1188 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
1190 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
1192 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
1193 specifiers for fmovem* instructions.
1195 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1197 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
1199 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
1201 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
1204 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1206 * mn10300-opc.c: Add some comments explaining the various
1209 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
1211 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1213 * m68k-dis.c (print_insn_arg): Handle new < and > operand
1216 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1217 operand specifiers in fmovm* instructions.
1219 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
1221 * ppc-opc.c (insert_li): Give an error if the offset has the two
1222 least significant bits set.
1224 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
1226 * mips-dis.c (print_insn_mips16): Separate the instruction from
1227 the arguments with a tab, not a space.
1229 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
1231 * mn10300-dis.c (disasemble): Finish conversion to '$' as
1234 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1237 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
1239 * configure: Rebuild with autoconf 2.12.
1241 Add support for mips16 (16 bit MIPS implementation):
1242 * mips16-opc.c: New file.
1243 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1244 (mips16_reg_names): New static array.
1245 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1246 after seeing a 16 bit symbol.
1247 (print_insn_little_mips): Likewise.
1248 (print_insn_mips16): New static function.
1249 (print_mips16_insn_arg): New static function.
1250 * mips-opc.c: Add jalx instruction.
1251 * Makefile.in (mips16-opc.o): New target.
1252 * configure.in: Use mips16-opc.o for bfd_mips_arch.
1253 * configure: Rebuild.
1255 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
1257 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1258 operand specifiers in *save, *restore and movem* instructions.
1260 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1263 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1264 register operands for immediate arithmetic, not, neg, negx, and
1265 set according to condition instructions.
1267 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1268 specifier of the effective-address operand in immediate forms of
1269 arithmetic instructions. The specifier for the immediate operand
1270 notes how and where the constant will be stored.
1272 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
1274 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1277 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1280 * mn10300-dis.c (disassemble): Prefix registers with '%'.
1282 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
1284 * mn10300-dis.c (disassemble): Handle register lists.
1286 * mn10300-opc.c: Fix handling of register list operand for
1287 "call", "ret", and "rets" instructions.
1289 * mn10300-dis.c (disassemble): Print PC-relative and memory
1290 addresses symbolically if possible.
1291 * mn10300-opc.c: Distinguish between absolute memory addresses,
1292 pc-relative offsets & random immediates.
1294 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1296 (disassemble): Handle SPLIT and EXTENDED operands.
1298 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
1300 * mn10300-dis.c: Rough cut at printing some operands.
1302 * mn10300-dis.c: Start working on disassembler support.
1303 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1305 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1307 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1309 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1311 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1313 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
1315 * mn10300-opc.c (mn10300_opcodes): Demand parens around
1316 register argument is calls and jmp instructions.
1318 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
1320 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1321 getx operand. Fix opcode for mulqu imm,dn.
1323 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
1325 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1326 in MN10300_OPERAND_SPLIT operands for how many bits
1327 appear in the basic insn word. Add IMM32_HIGH24,
1328 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1329 (mn10300_opcodes): Use new operands as needed.
1331 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1332 for bset, bclr, btst instructions.
1333 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1335 * mn10300-opc.c (mn10300_operands): Remove many redundant
1336 operands. Update opcode table as appropriate.
1337 (IMM32): Add MN10300_OPERAND_SPLIT flag.
1338 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1340 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
1342 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1343 operands (for indexed load/stores). Fix bitpos for DI
1344 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1345 few instructions that insert immediates/displacements in the
1346 middle of the instruction. Add IMM8E for 8 bit immediate in
1347 the extended part of an instruction.
1348 (mn10300_operands): Use new opcodes as appropriate.
1350 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1352 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1353 sequential so the assembler never parallelizes it with
1356 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
1358 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1359 a data/address register that appears in register field 0
1360 and register field 1.
1361 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1363 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
1365 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1366 standard disassembly.
1368 * alpha-opc.c (alpha_operands): Rearrange flags slot.
1369 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1370 Recategorize PALcode instructions.
1372 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
1374 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1376 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
1378 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1379 there are no operand types.
1381 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
1383 * v850-opc.c (D9_RELAX): Renamed from D9, all references
1385 (v850_operands): Make sure D22 immediately follows D9_RELAX.
1387 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
1389 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1391 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
1393 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1394 and sst.w instructions.
1396 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1399 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
1401 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1404 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
1406 * ppc-opc.c (PPCPWR2): Define.
1407 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1410 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
1412 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1413 field for movhu instruction.
1415 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1416 cast value to "long" not "signed long" to keep hpux10
1419 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
1421 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1424 * mn10300-opc.c (FMT*): Remove definitions.
1426 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1427 for shift-by-register opcodes.
1429 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1430 into [AD][MN][01] for encoding the position of the register
1433 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1435 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1436 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1438 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1440 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1441 Fix various typos. Add "PAREN" operand.
1442 (MEM, MEM2): Define.
1443 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1444 operands. Fix several typos.
1446 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1449 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1451 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1452 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1454 (mn10300_opcodes): Break opcode format out into its own field.
1455 Update many operand fields to deal with signed vs unsigned
1456 issues. Fix one or two typos in the "mov" instruction
1457 opcode, mask and/or operand fields.
1459 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1461 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1462 m68851 wasn't reset.
1464 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1466 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1467 all opcodes. Very rough cut at operands for all opcodes.
1469 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1472 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1474 * mn10200-opc.c, mn10300-opc.c: New files.
1475 * mn10200-dis.c, mn10300-dis.c: New files.
1476 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1477 * disassemble.c: Break mn10x00 support into 10200 and 10300
1479 * configure.in: Likewise.
1480 * configure: Rebuilt.
1482 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1484 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1486 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1488 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1490 * disassemble (ARCH_mn10x00): Define.
1491 (disassembler): Handle bfd_arch_mn10x00.
1492 * configure.in: Recognize bfd_mn10x00_arch.
1493 * configure: Rebuilt.
1495 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1497 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1498 accordingly. Don't declare functions using op_rtn.
1500 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1502 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1503 params to be more standard.
1504 * (disassemble): Print absolute addresses and symbolic names for
1505 branch and jump targets.
1506 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1508 * (v850_opcodes): Add breakpoint insn.
1510 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1512 * m68k-opc.c: Move the fmovemx data register cases before the
1513 other cases, so that they get recognized before the data register
1514 does gets treated as a degenerate register list.
1516 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1518 * mips-opc.c: Add a case for "div" and "divu" with two registers
1519 and a destination of $0.
1521 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1523 * mips-dis.c (print_insn_arg): Add prototype.
1524 (_print_insn_mips): Ditto.
1526 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1528 * mips-dis.c (print_insn_arg): Print condition code registers as
1531 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1533 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1535 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1537 * v850-dis.c (disassemble): Make static. Provide prototype.
1539 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1541 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1544 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1546 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1547 ']' characters into the output stream.
1548 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1549 Add "memop" field to all opcodes (for the disassembler).
1550 Reorder opcodes so that "nop" comes before "mov" and "jr"
1551 comes before "jarl".
1553 * v850-dis.c (print_insn_v850): Fix typo in last change.
1555 * v850-dis.c (print_insn_v850): Properly handle disassembling
1556 a two byte insn at the end of a memory region when the memory
1557 region's size is only two byte aligned.
1559 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1561 * v850-dis.c (v850_reg_names): Define.
1562 (v850_sreg_names, v850_cc_names): Likewise.
1563 (disassemble): Very rough cut at printing operands (unformatted).
1565 * v850-opc.c (BOP_MASK): Fix.
1566 (v850_opcodes): Fix mask for jarl and jr.
1568 * v850-dis.c: New file. Skeleton for disassembler support.
1569 * Makefile.in Remove v850 references, they're not needed here.
1570 * configure.in: Add v850-dis.o when building v850 toolchains.
1571 * configure: Rebuilt.
1572 * disassemble.c (disassembler): Call v850 disassembler.
1574 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1575 (insert_d8_6, extract_d8_6): New functions.
1576 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1577 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1579 (IF4A, IF4B): Use "D7" instead of "D7S".
1580 (IF4C, IF4D): Use "D8_7" instead of "D8".
1581 (IF4E, IF4F): New. Use "D8_6".
1582 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1583 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1585 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1586 (v850_operands): Change D16 to D16_15, use special insert/extract
1587 routines. New new D16 that uses the generic insert/extract code.
1588 (IF7A, IF7B): Use D16_15.
1589 (IF7C, IF7D): New. Use D16.
1590 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1592 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1593 message. Issue an error if the branch offset is odd.
1595 * v850-opc.c: Add notes about needing special insert/extract
1596 for all the load/store insns, except "ld.b" and "st.b".
1598 * v850-opc.c (insert_d22, extract_d22): New functions.
1599 (v850_operands): Use insert_d22 and extract_d22 for
1601 (insert_d9): Fix range check.
1603 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1605 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1606 and set bits field to D9 and D22 operands.
1608 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1610 * v850-opc.c (v850_operands): Define SR2 operand.
1611 (v850_opcodes): "ldsr" uses R1,SR2.
1613 * v850-opc.c (v850_opcodes): Fix opcode specs for
1614 sld.w, sst.b, sst.h, sst.w, and nop.
1616 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1618 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1619 end of the opcode table.
1621 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1623 * d10v-opc.c (pre_defined_registers): Added register pairs,
1624 "r0-r1", "r2-r3", etc.
1626 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1628 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1629 Create I16U for an unsigned 16bit mmediate operand.
1630 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1632 * v850-opc.c (v850_operands): Define EP operand.
1633 (IF4A, IF4B, IF4C, IF4D): Use EP.
1635 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1636 with immediate operand, "movhi". Tweak "ldsr".
1638 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1639 correct. Get sld.[bhw] and sst.[bhw] closer.
1641 * v850-opc.c (v850_operands): "not" is a two byte insn
1643 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1645 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1647 * v850-opc.c (two): Get order of words correct.
1649 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1651 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1652 register source and destination operands.
1653 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1655 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1656 same thinko in "trap" opcode.
1658 * v850-opc.c (v850_opcodes): Add initializer for size field
1661 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1662 Add D8 for 8-bit unsigned field in short load/store insns.
1663 (IF4A, IF4D): These both need two registers.
1664 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1665 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1666 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1667 for "ldsr" and "stsr".
1668 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1671 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1672 short store word (sst.w).
1674 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1676 * v850-opc.c (v850_operands): Added insert and extract fields,
1677 pointers to functions that handle unusual operand encodings.
1679 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1681 * v850-opc.c (v850_opcodes): Enable "trap".
1683 * v850-opc.c (v850_opcodes): Fix order of displacement
1684 and register for "set1", "clr1", "not1", and "tst1".
1686 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1688 * v850-opc.c (v850_operands): Add "B3" support.
1689 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1692 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1694 * v850-opc.c: Close unterminated comment.
1696 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1698 * v850-opc.c (v850_operands): Add flags field.
1699 (v850_opcodes): add move opcodes.
1701 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1703 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1704 * configure: (bfd_v850v_arch) Add new case.
1705 * configure.in: (bfd_v850_arch) Add new case.
1706 * v850-opc.c: New file.
1708 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1710 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1712 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1714 * d10v-opc.c: Add additional information to the opcode
1715 table to help determinine which instructions can be done
1718 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1720 * mpw-make.sed: Update editing of include pathnames to be
1723 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1725 * arm-opc.h: Added "bx" instruction definition.
1727 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1729 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1731 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1733 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1735 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1737 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1739 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
1741 * makefile.vms: Update for alpha-opc changes.
1743 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
1745 * i386-dis.c (print_insn_i386): Actually return the correct value.
1746 (ONE, OP_ONE): #ifdef out; not used.
1748 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1750 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1751 Changed subi operand type to treat 0 as 16.
1753 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
1755 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
1758 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
1760 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1761 memory transfer instructions. Add new format string entries %h and %s.
1762 * arm-dis.c: (print_insn_arm): Provide decoding of the new
1765 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1767 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1768 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1770 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
1772 * alpha-dis.c (print_insn_alpha_osf): Remove.
1773 (print_insn_alpha_vms): Remove.
1774 (print_insn_alpha): Make globally visible. Chose the register
1775 names based on info->flavour.
1776 * disassemble.c: Always return print_insn_alpha for the alpha.
1778 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1780 * d10v-dis.c (dis_long): Handle unknown opcodes.
1782 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1784 * d10v-opc.c: Changes to support signed and unsigned numbers.
1785 All instructions with the same name that have long and short forms
1786 now end in ".l" or ".s". Divs added.
1787 * d10v-dis.c: Changes to support signed and unsigned numbers.
1789 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1791 * d10v-dis.c: Change all functions to use info->print_address_func.
1793 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1795 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1796 move ccr/sr insns more strict so that the disassembler only
1797 selects them when the addressing mode is data register.
1799 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1800 * d10v-opc.c (pre_defined_registers): Declare.
1801 * d10v-dis.c (print_operand): Now uses pre_defined_registers
1802 to pick a better name for the registers.
1804 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
1806 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
1807 operands for fexpand and fpmerge. From Christian Kuehnke
1808 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1810 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
1812 * alpha-dis.c (print_insn_alpha): No longer the user-visible
1813 print routine. Take new regnames and cpumask arguments.
1814 Kill the environment variable nonsense.
1815 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
1816 (print_insn_alpha_vms): New function. Do VMS style regnames.
1817 * disassemble.c (disassembler): Test bfd flavour to pick
1818 between OSF and VMS routines. Default to OSF.
1820 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
1822 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1823 * configure: Rebuild.
1824 * Makefile.in (install): Use @INSTALL_SHLIB@.
1826 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1828 * configure: (bfd_d10v_arch) Add new case.
1829 * configure.in: (bfd_d10v_arch) Add new case.
1830 * d10v-dis.c: New file.
1831 * d10v-opc.c: New file.
1832 * disassemble.c (disassembler) Add entry for d10v.
1834 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1836 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1837 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1839 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
1841 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
1842 distinguish between variants of the instruction set.
1843 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
1844 distinguish between variants of the instruction set.
1846 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
1848 * i386-dis.c (print_insn_i8086): New routine to disassemble using
1849 the 8086 instruction set.
1850 * i386-dis.c: General cleanups. Make most things static. Add
1851 prototypes. Get rid of static variables aflags and dflags. Pass
1852 them as args (to almost everything).
1854 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
1856 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1858 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1860 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1861 if the next arg is marked with SRC_IN_DST. Gross.
1863 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1864 we're looking for and find EXR.
1866 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1867 if we're looking for KBIT and we don't find it.
1869 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1872 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1873 3bit immediate operands.
1875 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
1877 * Released binutils 2.7.
1879 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
1880 <kkaempf@progis.ac-net.de>.
1882 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
1884 * alpha-opc.c: Correct second case of "mov" to use OPRL.
1886 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
1888 * sparc-dis.c (print_insn_sparclite): New routine to print
1889 sparclite instructions.
1891 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1893 * m68k-opc.c (m68k_opcodes): Add coldfire support.
1895 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
1897 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
1898 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
1899 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
1901 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1903 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
1904 Use autoconf-set values.
1905 (docdir, oldincludedir): Removed.
1906 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1908 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
1910 * alpha-opc.c: New file.
1911 * alpha-opc.h: Remove.
1912 * alpha-dis.c: Complete rewrite to use new opcode table.
1913 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
1914 * configure: Rebuild with autoconf 2.10.
1915 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
1916 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
1918 (alpha-opc.o): New target.
1920 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
1922 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
1923 Set imm_added_to_rs1 even if the source and destination register
1926 * sparc-opc.c: Add some two operand forms of the wr instruction.
1928 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
1930 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
1933 * disassemble.c (disassembler): Handle H8/S.
1934 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
1936 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
1938 * sparc-opc.c: Add beq/teq as aliases for be/te.
1940 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
1941 <sergei@msil.sps.mot.com>.
1943 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
1945 * makefile.vms: New file.
1947 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
1949 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
1951 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
1954 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
1956 * i386-dis.c (OP_OFF): Call append_prefix.
1958 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1960 * ppc-opc.c (instruction encoding macros): Add explicit casts to
1961 unsigned long to silence a warning from the Solaris PowerPC
1964 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
1966 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
1968 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
1970 * sparc-dis.c (X_IMM,X_SIMM): New macros.
1972 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
1973 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
1974 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
1975 cpush, cpusha, cpull sparclet insns.
1977 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
1979 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
1981 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
1983 * sparc-opc.c: Set F_FBR on floating point branch instructions.
1984 Set F_FLOAT on other floating point instructions.
1986 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1988 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
1990 (powerpc_opcodes): Add 860/821 specific SPRs.
1992 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
1994 * configure.in: Permit --enable-shared to specify a list of
1995 directories. Set and substitute BFD_PICLIST.
1996 * configure: Rebuild.
1997 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
1998 uses. Set to @BFD_PICLIST@.
2000 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
2002 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
2003 not "abs", which may be needed for the absolute in something
2004 like btst #0,@10:8. Print L_3 immediates separately from other
2005 immediates. Change ABSMOV reference to ABS8MEM.
2007 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
2009 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
2010 (current_arch_mask): New static global.
2011 (compute_arch_mask): New static function.
2012 (print_insn_sparc): Delete sparc_v9_p. New static local
2013 current_mach. Resort opcode table if current_mach changes.
2014 Generalize "insn not supported" test.
2015 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
2016 Delete test for v9/!v9.
2017 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
2019 (brfc): Split into CBR and FBR for coprocessor/fp branches.
2020 (brfcx): Renamed to FBRX.
2021 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
2022 coprocessor mnemonics are not supported on the sparclet).
2023 (condf): Renamed to CONDF.
2024 (SLCBCC2): Delete F_ALIAS flag.
2026 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
2028 * sparc-opc.c (sparc_opcodes): rd must be 0 for
2029 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
2031 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
2033 * Makefile.in (config.status): Depend upon BFD VERSION file, so
2034 that the shared library version number is set correctly.
2036 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
2038 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
2039 Miles Bader <miles@gnu.ai.mit.edu>.
2040 * configure: Rebuild.
2042 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
2044 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
2047 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
2049 * configure: Rebuild with autoconf 2.8.
2051 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
2053 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
2054 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
2056 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
2058 * configure.in: Don't set SHLIB or SHLINK to an empty string,
2059 since they appear as targets in Makefile.in.
2060 * configure: Rebuild.
2062 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
2064 * mpw-make.sed: Edit out shared library support bits.
2066 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
2068 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
2069 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
2070 (sparc_opcodes): Add sparclet insns.
2071 (sparclet_cpreg_table): New static local.
2072 (sparc_{encode,decode}_sparclet_cpreg): New functions.
2073 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
2075 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
2077 * i386-dis.c (index16): New static variable.
2078 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
2080 (OP_indirE): Return result of OP_E.
2081 (OP_E): Check for 16 bit addressing mode, and disassemble
2082 correctly. Optimised 32 bit case a little. Don't print
2083 "(base,index,scale)" when sib specifies only an offset.
2085 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
2087 * configure.in: Set and substitute SHLIB_DEP.
2088 * configure: Rebuild.
2089 * Makefile.in (SHLIB_DEP): New variable.
2090 (LIBIBERTY_LISTS, BFD_LIST): New variables.
2091 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
2092 COMMON_SHLIB, add them to piclist with appropriate modifications.
2093 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
2094 here: just use piclist.
2096 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
2098 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
2099 (print_insn_sparc): Rewrite v9/not-v9 tests.
2100 (compare_opcodes): Likewise.
2101 * sparc-opc.c (MASK_<ARCH>): Define.
2102 (v6,v7,v8,sparclite,v9,v9a): Redefine.
2103 (sparclet,v6notv9): Define.
2104 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
2105 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
2107 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
2109 * configure.in: Call AC_PROG_CC before configure.host.
2110 * configure: Rebuild.
2112 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
2114 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
2116 * i386-dis.c (onebyte_has_modrm): New static array.
2117 (twobyte_has_modrm): New static array.
2118 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
2120 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
2122 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
2125 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2127 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
2130 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
2132 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
2133 m68010up, not just m68020up | cpu32.
2135 * Makefile.in (SONAME): New variable.
2136 ($(SHLINK)): Make a link to the transformed name, as well.
2137 (stamp-tshlink): New target.
2138 (install): Skip stamp-tshlink during install.
2140 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
2142 * configure.in: Call AC_ARG_PROGRAM.
2143 * configure: Rebuild.
2144 * Makefile.in (program_transform_name): New variable.
2145 (install): Transform library name before installing it.
2147 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
2149 * i960-dis.c (mem): Add HX dcinva instruction.
2151 Support for building as a shared library, based on patches from
2152 Alan Modra <alan@spri.levels.unisa.edu.au>:
2153 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
2154 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
2155 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
2156 * configure: Rebuild.
2157 * Makefile.in (ALLLIBS): New variable.
2158 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
2159 (COMMON_SHLIB, SHLINK): New variables.
2160 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
2161 (STAGESTUFF): Remove variable.
2162 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
2163 (stamp-piclist, piclist): New targets.
2164 ($(SHLIB), $(SHLINK)): New targets.
2165 ($(OFILES)): Depend upon stamp-picdir.
2166 (disassemble.o): Build twice if PICFLAG is set.
2167 (MOSTLYCLEAN): Add pic/*.o.
2168 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
2169 (distclean): Remove pic and stamp-picdir.
2170 (install): Install shared libraries.
2171 (stamp-picdir): New target.
2173 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
2175 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
2176 Print unknown instruction as "unknown", rather than in hex.
2178 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
2180 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
2182 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
2184 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
2186 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
2188 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
2189 when necessary. From Ulrich Drepper
2190 <drepper@myware.rz.uni-karlsruhe.de>.
2192 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
2194 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
2195 sparc_num_opcodes. Update architecture enum values.
2196 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
2197 (sparc_opcode_lookup_arch): New function.
2198 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
2199 (sparc_opcodes): Add v9a shutdown insn.
2201 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
2203 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
2204 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
2206 (print_insn_sparc64): Deleted.
2207 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
2210 * sparc-opc.c (architecture_pname): Add v9a.
2212 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
2214 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
2215 incorrectly defined as 0x16 when it should be 0x15.
2216 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
2217 (alpha_insn_set): added cvtst and cvttq float ops. Also added
2218 excb (exception barrier) which is defined in the Alpha
2219 Architecture Handbook version 2.
2220 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2221 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
2222 disassembled as or, for example.
2224 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
2226 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2227 (_print_insn_mips): Change i from int to unsigned int.
2229 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
2231 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2232 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
2234 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
2236 * i386-dis.c: Added Pentium Pro instructions.
2238 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2240 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2243 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2245 * sh-opc.h (sh_nibble_type): Added REG_B.
2246 (sh_arg_type): Added A_REG_B.
2247 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2249 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2251 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
2253 * disassemble.c (disassembler): Use new bfd_big_endian macro.
2255 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
2257 * Makefile.in (distclean): Remove stamp-h. From Ronald
2258 F. Guilmette <rfg@monkeys.com>.
2260 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
2262 From David Mosberger-Tang <davidm@azstarnet.com>:
2263 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2266 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2268 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2269 (sh_table): Added many SH3 opcodes.
2270 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2272 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2274 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2275 (subco,subco.): Mark this PPC, not PPCCOM.
2277 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
2279 * configure: Rebuild with autoconf 2.7.
2281 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
2283 * configure: Rebuild with autoconf 2.6.
2285 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
2287 * configure.in: Sort list of architectures. Accept but do nothing
2288 for alliant, convex, pyramid, romp, and tahoe.
2290 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
2292 * a29k-dis.c (print_special): Change num to unsigned int.
2294 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
2296 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2299 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
2301 * configure.in: Call AC_CHECK_PROG to find and cache AR.
2302 * configure: Rebuilt.
2304 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
2306 * configure.in: Add case for bfd_i860_arch.
2307 * configure: Rebuild.
2309 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
2311 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2312 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2313 (NEXTDOUBLE): Likewise.
2314 (print_insn_m68k): Don't match fmoveml if there is more than one
2315 register in the list.
2316 (print_insn_arg): Handle a place of '8' for a type of 'L'.
2318 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
2320 * m68k-opc.c: Use #W rather than #w.
2321 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2323 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
2325 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2326 and likewise for all the dbxx opcodes.
2328 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
2330 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2332 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
2334 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2335 the VR4100 specific instructions to the mips_opcodes structure.
2337 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
2339 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2340 ugly Metrowerks bug in CW6, is fixed in CW7.
2342 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2344 * ppc-opc.c (whole file): Add flags for common/any support.
2346 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
2348 * Makefile.in (BISON): Remove macro.
2349 (FLAGS_TO_PASS): Remove BISON.
2351 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
2353 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2355 * m68k-dis.c (print_insn_m68k): Recognize all two-word
2356 instructions that take no args by looking at the match mask.
2357 (print_insn_arg): Always print "%" before register names.
2358 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2359 [case '_']: Don't print "@#" before address.
2360 [case 'J']: Use "%s" as format string, not register name.
2361 [case 'B']: Treat place == 'C' like 'l' and 'L'.
2363 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
2365 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2368 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
2370 From David Mosberger-Tang <davidm@azstarnet.com>
2372 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2373 (alpha_insn_set): added definitions for VAX floating point
2374 instructions (Unix compilers don't generate these, but handcoded
2375 assembly might still use them).
2377 * alpha-dis.c (print_insn_alpha): added support for disassembling
2378 the miscellaneous instructions in the Alpha instruction set.
2380 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
2382 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2383 no longer create sysdep.h, sed ppc-opc.c to work around a
2384 serious Metrowerks C bug.
2385 * mpw-make.in: Remove.
2386 * mpw-make.sed: New file, used by mpw-configure to edit
2387 Makefile.in into an MPW makefile.
2389 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
2391 * Makefile.in (maintainer-clean): New synonym for realclean.
2393 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
2395 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2396 which use '0', '1', and '2' instead. Specify the proper size for
2397 a pmove immediate operand. Correct the pmovefd patterns to be
2398 moves to a register, not from a register.
2399 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2401 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
2403 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2404 %psr, %wim, %tbr as F_NOTV9.
2406 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
2408 * Makefile.in (Makefile): Just rebuild Makefile when running
2410 (config.h, stamp-h): New targets.
2411 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2412 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2413 rebuilding config.h.
2414 * configure: Rebuild.
2416 * mips-opc.c: Change unaligned loads and stores with "t,A"
2417 operands to use "t,A(b)".
2419 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2421 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2423 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2425 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2426 until 3 instead of until 2.
2428 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2430 * Makefile.in (ALL_CFLAGS): Define.
2431 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2432 (MOSTLYCLEAN): Add config.log.
2433 (distclean): Don't remove config.log.
2434 * configure.in: Substitute HDEFINES.
2435 * configure: Rebuild.
2437 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2439 * sh-opc.h (sh_arg_type): Add F_FR0.
2440 (sh_table, case fmac): Add F_FR0 as first argument.
2442 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2444 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2446 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2448 * sparc-dis.c: Remove all references to NO_V9.
2450 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2452 * aclocal.m4: Just include ../bfd/aclocal.m4.
2453 * configure: Rebuild.
2455 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2457 * sparc-dis.c (X_DISP19): Define.
2458 (print_insn, case 'G'): Use it.
2459 (print_insn, case 'L'): Sign extend displacement.
2461 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2463 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2464 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2465 host_makefile_frag or frags.
2466 * aclocal.m4: New file.
2467 * configure: Rebuild.
2468 * Makefile.in (INSTALL): Set to @INSTALL@.
2469 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2470 (INSTALL_DATA): Set to @INSTALL_DATA@.
2472 (AR_FLAGS): Set to rc rather than qc.
2473 (CC): Define as @CC@.
2474 (CFLAGS): Set to @CFLAGS@.
2475 (@host_makefile_frag@): Remove.
2476 (config.status): Remove dependency upon @frags@.
2478 * configure.in: ../bfd/config.bfd now just sets shell variables.
2479 Use them rather than looking through target Makefile fragments.
2480 * configure: Rebuild.
2482 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2484 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2486 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2488 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2489 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2492 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2493 (lookup_{name,value}): New functions.
2494 (prefetch_table): New static local.
2495 (sparc_{encode,decode}_prefetch): New functions.
2496 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2498 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2500 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2503 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2505 * sh-dis.c: Correct comment on first line of file.
2507 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2509 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2511 * sparc-opc.c (asi, membar): New static locals.
2512 (sparc_{encode,decode}_{asi,membar}): New functions.
2513 (sparc_opcodes, membar insn): Fix.
2514 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2515 Support decoding of membar masks.
2518 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2520 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2522 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2524 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2525 and likewise for the other branches. Add bhs as an alias for bcc,
2526 and likewise for the size variants. Add dbhs as an alias for
2529 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2531 * sh-opc.h (FP sts instructions): Update to match reality.
2533 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2535 * m68k-dis.c: (fpcr_names): Add % before all register names.
2536 (reg_names): Likewise.
2537 (print_insn_arg): Don't explicitly print % before register names.
2538 Add % before register names in static array names. In case 'r',
2539 print data registers as `@(Dn)', not `Dn@'. When printing a
2540 memory address, don't print @# before it.
2541 (print_indexed): Change base_disp and outer_disp from int to
2542 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2543 syntax. Sign extend 8 byte displacement correctly.
2544 (print_base): Print using MIT syntax. Print zpc when appropriate.
2545 Change parameter disp from int to bfd_vma.
2547 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2550 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2552 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2553 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2554 * sh-opc.h (sh_arg_type): Add new operand types.
2555 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2557 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2559 * Makefile.in (distclean): Remove generated file config.h.
2561 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2563 * Makefile.in (distclean): Remove generated file config.h.
2565 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2567 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2569 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2571 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2572 rather than numopcodes. Use m68k_opcodes rather than removed
2573 opcode function. Don't check F_ALIAS.
2574 (print_insn_arg): Change first parameter to be const char *.
2575 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2576 (m68k-opc.o): New target.
2577 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2578 * configure: Rebuild.
2580 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2582 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2583 (opcode_bits, opcode_hash_table): New variables.
2584 (opcodes_initialized): Renamed from opcodes_sorted.
2585 (build_hash_table): New function.
2586 (is_delayed_branch): Use hash table.
2587 (print_insn): Renamed from print_insn_sparc, made static.
2588 Build and use hash table. If !sparc64, ignore sparc64 insns,
2589 and vice-versa if sparc64.
2590 (print_insn_sparc, print_insn_sparc64): New functions.
2591 (compare_opcodes): Move sparc64 opcodes to end.
2592 Print commutative insns with constant second.
2593 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2595 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2597 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2598 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2599 avoids printing a delay slot in a delay slot.
2600 * sh-opc.h (sh_table): Fully bracket last entry.
2602 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2604 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2606 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2608 * configure.in: Get host_makefile_frag from ${srcdir}.
2610 * configure.in: Autoconfiscated. Check for string[s].h. Create
2611 config.h from config.in. Don't set up sysdep.h link.
2612 * sysdep.h: New file.
2613 * configure, config.in: New files, generated from configure.in.
2614 * Makefile.in: Updated to be processed autoconf-style.
2615 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2616 (Makefile): Depend on config.status.
2617 (config.status): New rule.
2618 * configure.bat: Update Makefile substitutions.
2620 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2622 * mips-opc.c (L1): Define.
2623 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2624 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2627 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2629 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2630 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2631 have multiple add units but only a single logical unit.
2633 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2634 shifted by 18, without any insertion or extraction function.
2635 (insert_cr, extract_cr): Remove.
2637 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2639 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2642 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2644 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2645 * sh-opc.h: Add copyright.
2647 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2649 * Makefile.in (crunch-m68k): Delete extra target accidentally
2650 checked in a while ago.
2652 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2654 * sh-opc.h (sh_table): Add SH3 support.
2656 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2658 * sh-opc.h: Added bsrf and braf.
2660 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2662 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2663 bogus [ls]fm{ea,fd} patterns.
2665 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2666 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2667 initialize it from memory. Make function static.
2668 (print_insn_{big,little}_arm): New functions.
2669 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2670 the correct endianness.
2672 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2674 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2677 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2679 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2680 17th, so that it builds again using GCC as the compiler.
2682 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2684 * mips-dis.c (print_insn_little_mips): Cast return value from
2685 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2686 expects an unsigned long, and that might be fewer words of
2687 argument storage (e.g., if bfd_vma is long long on a 32-bit
2689 (print_insn_big_mips): Likewise with bfd_getb32 value.
2690 (_print_insn_mips): Now static.
2692 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2694 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2695 gcc memory hog problem with initializer is fixed.
2697 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2699 Merge in support for Mac MPW as a host.
2700 (Old change descriptions retained for informational value.)
2702 * mpw-config.in (archname): Compute from the config.
2703 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2705 * mpw-config.in (target_arch): Compute from canonical target.
2706 (m68k, mips, powerpc, sparc): Add architectures.
2707 * mpw-make.in (disassemble.c.o): Add.
2708 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2710 * mpw-config.in (BFD_MACHINES): Set to a default value.
2711 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2713 * mpw-make.in (CSEARCH): Add extra-include to search path.
2715 * mpw-config.in (varargs.h): Don't create.
2716 (sysdep.h): Create using forward-include.
2717 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2719 * mpw-config.in: New file, MPW version of configure.in.
2720 * mpw-make.in: New file, MPW version of Makefile.in.
2722 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2724 * alpha-dis.c (print_insn_alpha): Put empty statement after
2727 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2729 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2730 (low_sign_extend): Likewise.
2731 (get_field): Delete unused function.
2732 (set_field, deposit_14, deposit_21): Likewise.
2734 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2736 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2739 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2741 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2743 * alpha-opc.h (OSF_ASMCODE): define
2744 print pal-code names as defined in App C of the
2745 Alpha Architecture Reference Manual
2747 * alpha-dis.c: cleaned up output
2748 print stylized code forms as defined in App A.4.3 of the
2749 Alpha Architecture Reference Manual
2751 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2753 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2755 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2758 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2760 * m68k-dis.c (opcode): New function. Returns address of opcode
2761 table entry given index, even if the opcode table was split to
2762 work around gcc bugs.
2763 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2765 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2766 (reg_names): Now const.
2767 (print_insn_arg): Arrays cacheFieldName and names now const.
2768 (print_indexed): Array scales now const.
2770 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2772 * ppc-opc.c: Sort recently added instructions by minor opcode
2773 number within major opcode number.
2775 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2777 * hppa-dis.c: Include libhppa.h.
2779 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
2781 * mips-opc.c: Change dli to use M_DLI, and add dla.
2783 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2785 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
2787 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
2789 * mips-opc.c: Add r4650 mul instruction.
2791 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
2793 * mips-opc.c: Add uld and usd macros for unaligned double load and
2796 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2798 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2799 mfdcr, mtdcr, icbt, iccci.
2801 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2803 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2804 signed char fields to shorts, more portable.
2806 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2808 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2809 char fields as signed chars, since they may have negative values.
2811 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2813 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2814 (mycroft@netbsd.org).
2816 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2818 From "Logg, Ed" <elogg@ea.com>:
2819 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2820 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2823 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2825 * ppc-opc.c: Changes based on patch from David Edelsohn
2826 <edelsohn@mhpcc.edu>.
2827 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2830 (insert_tbr): New static function.
2831 (extract_tbr): New static function.
2832 (XFXFXM_MASK, XFXM): Define.
2833 (XSPRBAT_MASK, XSPRG_MASK): Define.
2834 (powerpc_opcodes): Add instructions to access special registers by
2835 name. Add mtcr and mftbu.
2837 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2839 * mips-opc.c (P3): Define.
2840 (mips_opcodes): Add mad and madu.
2842 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2844 * configure.in: Add W65 support.
2845 * disassemble.c: Likewise.
2846 * w65-opc.h, w65-dis.c: New files.
2848 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2850 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2853 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2855 * mips-opc.c: Add dli as a synonym for li.
2857 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2859 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2860 print something for reserved opcode values, even if it won't
2863 * mips-dis.c (_print_insn_mips): When initializing, shift right
2864 and mask, to avoid sign extension problems on the Alpha.
2866 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2869 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2871 * sh-opc.h (mov.l gbr): Get direction right.
2872 * sh-dis.c (print_insn_shx): New function.
2873 (print_insn_shl, print_insn_sh): Call print_insn_shx to
2874 print opcodes with right byte order.
2876 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2878 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2879 to avoid conflicts with getopt.
2881 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2883 * hppa-dis.c (print_insn_hppa): Read the instruction using
2884 bfd_getb32, so that it works on a little endian or 64 bit host.
2885 Remove unused local variable op.
2887 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2889 * mips-opc.c: Use or instead of addu for pseudo-op move, since
2890 addu does not work correctly if -mips3.
2892 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2894 * a29k-dis.c (print_special): Add special register names defined
2895 on 29030, 29040 and 29050.
2896 (print_insn): Handle new operand type 'I'.
2898 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2900 * Makefile.in (INSTALL): Use top level install.sh script.
2902 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2904 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2905 that it works on a little endian host.
2907 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2909 * configure.in: Use ${config_shell} when running config.bfd.
2911 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2913 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2915 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2917 * a29k-dis.c (print_insn): Print the opcode.
2919 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2921 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2923 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
2925 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2927 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2929 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2930 which store a value into memory.
2932 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2934 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2935 * arm-dis.c, arm-opc.h: New files.
2937 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
2939 * Makefile.in (ns32k-dis.o): Add dependency.
2940 * ns32k-dis.c (print_insn_arg): Declare initialized local as
2941 string, not as array of chars.
2943 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2945 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2947 * sparc-opc.c: Added sparclite extended FP operations, and
2948 versions of v9 impdep* instructions permitting specification of
2951 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2953 * i960-dis.c (reg_names): Now const.
2954 (struct sparse_tabent): New type, copied from array type in mem
2956 (ctrl): Local static array ctrl_tab now const.
2957 (cobr): Local static array cobr_tab now const.
2958 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2959 static variable mem_tab no longer explicitly initialized. Changed
2960 mem_init to const array of struct sparse_tabent.
2961 (reg): Local static variable reg_tab no longer explicitly
2962 initialized. Changed reg_init to const array of struct
2964 (ea): Local static array scale_tab now const.
2966 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2969 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2971 * configure.bat: the disassember needs to be enabled for
2972 "objdump -d" to work in djgpp.
2974 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2976 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2977 (invalid_float): Enabled general version, doesn't require running
2978 on ns32k host. Changed to take char* argument, and test for
2979 explicitly specified sizes, instead of using sizeof() on host CPU
2981 (INVALID_FLOAT): Cast first argument.
2982 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2983 list_P032, list_M032): Now const.
2984 (optlist, list_search): Made appropriate arguments now point to
2986 (print_insn_arg): Changed static array of one-character-string
2987 pointers into a static const array of characters; fixed sprintf
2988 statement accordingly.
2990 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2992 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
2993 from distribution. A ns32k-dis.c from a previous distribution has
2994 been brought up to date and supports the new interface.
2996 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2998 * configure.in: add bfd_ns32k_arch target support.
3000 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
3001 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
3003 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
3005 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
3008 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
3010 * h8300-dis.c, mips-dis.c: Don't use true and false.
3012 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
3014 * configure.in: Change --with-targets to --enable-targets.
3016 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3018 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
3019 opcodes to the first instruction with that opcode, to speed
3020 disassembly of large files. From ralphc@pyramid.com (Ralph
3023 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3025 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
3027 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
3029 * configure.bat: update to latest makefile.in
3031 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
3033 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
3034 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
3035 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
3036 slot insn is in a delay slot.
3037 * z8k-opc.h: (resflg): Fix patterns.
3038 * h8500-opc.h Fix CR insn patterns.
3040 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3042 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
3043 "cmpl" before POWER versions, so that gas -many uses them.
3045 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3047 * disassemble.c: New file.
3048 * Makefile.in (OFILES): Add disassemble.o.
3049 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
3050 * configure.in: Define ARCHDEFS in Makefile. Code taken from
3051 binutils/configure.in.
3053 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
3054 opcode being examined.
3056 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3058 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
3059 (insert_ral, insert_ram, insert_ras): New functions.
3060 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
3061 RAS for store with update.
3063 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3065 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
3066 (edelsohn@npac.syr.edu).
3068 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3070 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
3073 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
3075 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
3077 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3079 * ppc-opc.c (powerpc_operands): The signedp field has been
3080 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
3081 instead. Add new operand SISIGNOPT.
3082 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
3083 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
3084 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
3087 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3089 * i386-dis.c (struct private): Renamed to dis_private. `private'
3090 is a reserved word for dynix cc.
3092 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3094 * configure.in: Change error message to refer to bfd/config.bfd
3095 rather than bfd/configure.in.
3097 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
3099 * ppc-opc.c: Define POWER2 as short alias flag.
3100 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
3103 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3105 * i960-dis.c (print_insn_i960): Don't read a second word for
3106 opcodes 0, 1, 2 and 3.
3108 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3110 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
3112 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3114 * m68881-ext.c: Removed; no longer used.
3115 * Makefile.in: Changed accordingly.
3117 * m68k-dis.c (ext_format_68881): Don't declare.
3118 (print_insn_m68k): If an instruction uses place 'i', it uses at
3119 least four fixed bytes.
3120 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
3121 extended float, convert to double using floatformat_to_double, not
3122 ieee_extended_to_double, and fetch the data before converting it.
3124 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3126 * mips-opc.c: It's sqrt.s, not sqrt.w. From
3127 davidj@ICSI.Berkeley.EDU (David Johnson).
3129 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3131 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
3132 PowerPC uses bdnz[l][a].
3134 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3136 * dis-buf.c, i386-dis.c: Include sysdep.h.
3138 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3140 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
3142 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
3143 by Motorola PowerPC 601 with PPC_OPCODE_601.
3144 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
3145 Disassemble Motorola PowerPC 601 instructions as well as normal
3146 PowerPC instructions.
3148 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
3150 * i960-dis.c (reg, mem): Just use a static array instead of
3153 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3155 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
3156 condition name index if this is for a negated condition.
3158 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
3159 Floating point format for 'H' operand is backwards from normal
3160 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
3161 operands (fmpyadd and fmpysub), handle bizarre register
3162 translation correctly for single precision format.
3164 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
3165 or 'I' operands if the next format specifier is 'M' (fcmp
3166 condition completer).
3168 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3170 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
3171 single number giving a bitmask for the MB and ME fields of an M
3172 form instruction. Change NB to accept 32, and turn it into 0;
3173 also turn 0 into 32 when disassembling. Seperated SH from NB.
3174 (insert_mbe, extract_mbe): New functions.
3175 (insert_nb, extract_nb): New functions.
3176 (SC_MASK): Mask out SA and LK bits.
3177 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
3178 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
3179 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
3180 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
3181 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
3182 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
3183 (powerpc_macros): Define table of macro definitions.
3184 (powerpc_num_macros): Define.
3186 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
3187 if PPC_OPERAND_NEXT is set.
3189 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3191 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
3192 char. Retrieve contents using bfd_getl32 instead of shifting.
3194 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3196 * ppc-opc.c: New file. Opcode table for PowerPC, including
3197 opcodes for POWER (RS/6000).
3198 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
3199 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
3200 (CFILES): Add ppc-dis.c.
3201 (ppc-dis.o, ppc-opc.o): New targets.
3202 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
3204 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3206 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
3207 No space before 'u', 'f', or 'N'.
3209 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
3211 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
3212 farther than we should.
3214 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3216 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3218 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3220 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3222 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3223 needs it, to prevent reading past the end of a section.
3225 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3227 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3228 Removed t,A case for la; always use t,A(b) case.
3230 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3232 From Ted Lemen <mellon@pepper.ncd.com>
3233 * mips-dis.c (print_insn_arg): Handle 'k'.
3234 * mips-opc.c: Make cache use k, not t.
3236 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3238 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
3239 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3240 FLOAT_FORMAT_CODE to put out floating point register names.
3242 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3244 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3246 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3248 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3250 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3252 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3253 larger than 32. Moved dsxx32 variants first for disassembler.
3255 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3257 * z8kgen.c, z8k-opc.h: Add full lda information.
3259 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
3261 * hppa-dis.c (print_insn_hppa): Do not emit a space after
3262 movb instructions. Any necessary space will be emitted by
3263 the code to handle nullification completers.
3265 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3267 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3269 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3271 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
3272 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3274 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3276 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3278 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3280 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3281 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3283 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3285 * m88k-dis.c (m88kdis): comment change. Remove space after
3287 (printop): handle new arg types DEC and XREG for m88110.
3289 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3291 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3292 type for absolute branch addresses. Delete special
3293 "ble" and "be" code in 'W' operand code.
3295 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3297 * mips-opc.c: Set hazard information correctly for branch
3298 likely instructions.
3300 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3302 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3303 info->fprintf_func for printing and info->print_address_func for
3306 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3308 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3310 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3312 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3313 Corrected second case of "b" for disassembler.
3315 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3317 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3318 to BFD swapping routines to correspond to BFD name changes.
3320 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3322 * mips-opc.c: Change div machine instruction to be z,s,t rather
3323 than s,t. Change div macro to be d,v,t rather than d,s,t.
3324 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3325 rem and remu which generates only the corresponding div
3326 instruction. This is for compatibility with the MIPS assembler,
3327 which only generates the simple machine instruction when an
3328 explicit destination of $0 is used.
3329 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3331 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3333 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3334 WR_31 hazard for bal, bgezal, bltzal.
3336 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3338 * hppa-dis.c (print_insn_hppa): Use print function
3339 from within the disassemble_info, not fprintf_filtered.
3341 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3343 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3344 Law, law@cs.utah.edu.)
3346 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3348 * mips-opc.c ("absu"): Removed.
3351 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3353 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3354 Changed hazard information to distinguish between memory load
3355 delays and coprocessor load delays.
3357 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3359 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3361 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3363 * configure.in: Don't pass cpu to config.bfd.
3365 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3367 * m88k-dis.c (m88kdis): Make class unsigned.
3369 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3371 * alpha-dis.c (print_insn_alpha): One branch format case was
3372 missing the instruction name.
3374 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3376 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3377 Add the arch-specific auxiliary files.
3378 (OFILES): Remove the arch-specific auxiliary files
3379 and use BFD_MACHINES instead of DIS_LIBS.
3380 * configure.in: Set BFD_MACHINES based on --with-targets option.
3382 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3384 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3387 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3389 * sparc-opc.c: Change CONST to const to deal with gcc
3390 -Dconst=__const -traditional.
3392 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3394 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3395 coprocessor instructions out of #if 0, and made them use new
3398 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3400 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3402 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3404 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3405 instruction, for use by the disassembler.
3407 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3408 hand-coded sign extensions that depended on 32-bit host ints.
3409 FIXME, we still depend on big-endian host bitfield ordering.
3410 (sparc_print_insn): Set the insn_info_valid field, and the
3411 other fields that describe the instruction being printed.
3413 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3415 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3416 `jmp' instead of just one of them.
3418 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3420 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3421 (fput_fp_reg_r): Renamed from fput_reg_r.
3422 (fput_fp_reg): New function.
3423 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3425 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3427 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3429 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3431 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3433 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3434 don't output a space.
3436 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3438 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3440 * mips-opc.c: New file, containing opcode table from
3441 ../include/opcode/mips.h.
3442 * Makefile.in: Add it.
3444 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3446 * m88k-dis.c: New file, moved in from gdb and changed to use the
3447 new dis-asm.h disassembler interface.
3448 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3449 (m88k-dis.o): New target.
3451 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3453 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3454 argument string const char * to correspond to opcode/mips.h.
3456 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3458 * mips-dis.c: Updated to account for name changes in new version
3460 * Makefile.in: Added header file dependencies.
3462 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3464 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3466 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3468 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3469 extend, rather than shifts.
3471 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3473 * Makefile.in: Undo 15 June change.
3475 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3477 * m68k-dis.c (print_insn_arg): Change return value to byte count
3479 * m68k-dis.c: Re-write to detect invalid operands before
3480 printing anything, so we can handle this the same way we
3481 handle invalid opcodes.
3483 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3485 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3487 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3489 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3492 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3494 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3496 * configure.in: Do make sysdep.h link.
3497 * Makefile.in: Search ../include. Don't search ../bfd.
3499 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3501 Changes from Jeff Law, law@cs.utah.edu:
3502 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3503 Do not print a space before the completers specified by
3506 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3508 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3509 defined, since gdb has been fixed.
3511 Changes from Jeff Law, law@cs.utah.edu:
3512 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3513 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3514 be a *disassemble_info, not a *FILE.
3515 * hppa-dis.c: Support 'd', '!', and 'a'.
3516 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3517 * hppa-dis.c: Delete cases which are no longer needed.
3519 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3521 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3523 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3525 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3528 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3530 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3531 * configure.in: No longer need to configure to get sysdep.h.
3533 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3535 * Patches from Jeffrey Law <law@cs.utah.edu>.
3536 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3537 templates for 1.1 FP computational instructions.
3539 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3541 * h8500-dis.c (print_insn_h8500): Address argument is type
3543 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3546 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3547 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3549 * sparc-dis.c (compare_opcodes): Move static declaration to
3552 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3554 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3555 instruction, remove unimp hack from 'l' argument.
3557 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3559 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3562 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3564 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3565 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3568 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3570 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3571 arrays of string pointers to 2-d arrays of chars, to save
3574 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3576 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3577 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3579 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3581 * hppa-dis.c: New file from Utah, adapted to new disassembler
3583 * Makefile.in: Include it.
3585 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3587 * sh-dis.c, sh-opc.h: New files.
3589 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3591 * alpha-dis.c, alpha-opc.h: New files.
3593 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3595 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3598 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3600 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3602 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3604 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3607 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3609 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3610 and double percent signs a few places.
3612 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3614 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3615 Use info->print_address_func not print_address.
3617 * dis-buf.c (generic_print_address): New function.
3619 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3621 * Makefile.in: Add sparc-dis.c.
3622 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3624 Add `add' instruction to the set that get checked
3625 for a preceding `sethi' in order to print an absolute address.
3626 * (print_insn): Disassembly prefers real instructions.
3627 (is_delayed_branch): Speed up.
3628 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3629 Still missing some float ops, and needs testing.
3630 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3631 F_ALIAS. Use printf, not fprintf, when not passing a file
3633 (compare_opcodes): Check that identical instructions have
3634 identical opcodes, complain otherwise.
3637 * Include reg_names.
3639 Use dis-asm.h/read_memory_func interface.
3641 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3643 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3644 deliberately return non-zero to setjmp from longjmp. Otherwise
3645 this code fails to compile.
3647 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3649 * m68k-dis.c: Fix prototype for fetch_arg().
3651 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3653 * dis-buf.c: New file, for new read_memory_func interface.
3654 Makefile.in (OFILES): Include it.
3655 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3656 Use new read_memory_func interface.
3658 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3660 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3661 * h8500-opc.h: Fix couple of opcodes.
3663 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3665 * Makefile.in: add dvi & installcheck targets
3667 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3669 * Makefile.in: Update for h8500-dis.c.
3671 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3673 * h8500-dis.c, h8500-opc.h: New files
3675 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3677 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3678 ../include/dis-asm.h.
3679 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3680 and ../gdb/m68k-pinsn.c).
3681 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3682 and ../gdb/i386-pinsn.c).
3683 * m68881-ext.c: New file. Moved definition of
3684 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3685 * Makefile.in: Adjust for new files.
3686 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3687 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3688 can be dis-assembled.
3690 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3692 * mips-dis.c (print_insn_arg): Now returns void.
3694 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3696 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3697 files that use the macros.
3699 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3701 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3702 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3703 (CFILES): Added mips-dis.c.
3705 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3707 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3708 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3710 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3712 * Makefile.in: Improve *clean rules.
3713 * configure.in: Allow a default host.
3715 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3717 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3718 files include other sysdep files
3720 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3722 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3724 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3726 * configure.in: For host support, use ../bfd/configure.host
3727 so it stays in sync with the ../bfd/hosts database.
3729 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3731 * configure.in: use cpu-vendor-os triple instead of nested cases
3733 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3735 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3736 *always* the wrong one.
3738 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3740 * z8kgen.c: added copyright info
3742 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3744 * z8k-dis.c (unparse_instr): prettier tabs
3745 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3747 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3749 * configure.in: Add ncr* configuration.
3750 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3751 picayune ANSI compilers happy.
3753 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3755 * configure.in (i386): Make i386 and i486 synonymous for now.
3756 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3758 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3760 * Makefile.in (install): Fix typo.
3762 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3764 * Makefile.in (make): Remove obsolete crud.
3765 (sparc-opc.o): Avoid Sun Make VPATH bug.
3767 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3769 * Makefile.in: since there are no SUBDIRS, remove rule and
3770 references of subdir_do.
3772 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3774 * Makefile.in (install): Get the library name right here too.
3775 Don't install bfd.h, since it's unrelated to this library. No
3776 subdirs to recurse into, either.
3777 (CFILES): The source file has a .c suffix, not .o.
3779 * sparc-opc.c: New file, moved from BFD.
3780 * Makefile.in (OFILES): Build it.
3782 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3784 * z8k-dis.c: fixed forward refferences of some declarations.
3786 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3788 * Makefile.in: get the name of the library right
3790 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3792 * z8k-dis.c: knows how to disassemble z8k stuff
3793 * z8k-opc.h: new file full of z8000 opcodes
3797 version-control: never
projects / deliverable / binutils-gdb.git / blob