1 2000-08-16 Jim Wilson <wilson@cygnus.com>
3 * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds. Delete
4 break, mov-immediate, nop.
5 * ia64-opc-f.c: Delete fpsub instructions.
6 * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
7 address operand. Rewrite using macros to avoid long lines.
8 * ia64-opc.h (POSTINC): Define.
9 * ia64-asmtab.c: Regenerate.
11 2000-08-15 Jim Wilson <wilson@cygnus.com>
13 * ia64-ic.tbl: Add missing entries.
15 2000-08-08 Jason Eckhardt <jle@cygnus.com>
17 * i860-dis.c (print_br_address): Change third argument from int
20 2000-08-07 Richard Henderson <rth@cygnus.com>
22 * ia64-dis.c (print_insn_ia64): Get byte skip count correct
23 for MLI templates. Handle IA64_OPND_TGT64.
25 2000-07-29 Marek Michalkiewicz <marekm@linux.org.pl>
27 * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
28 Change return type from void to int. Check the combination
29 of operands, return 1 if valid. Fix to avoid BUF overflow.
30 Report undefined combinations of operands in COMMENT.
31 Report internal errors to stderr. Output the adiw/sbiw
32 constant operand in both decimal and hex.
33 (print_insn_avr): Disassemble ldd/std with displacement of 0
34 as ld/st. Check avr_operand () return value, handle invalid
35 combinations of operands like unknown opcodes.
37 2000-08-04 Ben Elliston <bje@redhat.com>
39 * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
42 2000-08-02 Jim Wilson <wilson@cygnus.com>
44 * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
46 2000-07-28 Ben Elliston <bje@redhat.com>
48 * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
49 (run-cgen, stamp-m32r, stamp-fr30): New targets.
50 * Makefile.in: Regenerate.
51 * configure.in: Add --enable-cgen-maint option.
52 * configure: Regenerate.
54 2000-07-26 Dave Brolley <brolley@redhat.com>
56 * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
57 (cgen_hw_lookup_by_num): Ditto.
58 (cgen_operand_lookup_by_name): Ditto.
59 (print_address): Ditto.
60 (print_keyword): Ditto.
61 * cgen-dis.c (hash_insn_array): Mark unused parameters with
63 * cgen-asm.c (hash_insn_array): Mark unused parameters with
65 (cgen_parse_keyword): Ditto.
67 2000-07-22 Jason Eckhardt <jle@cygnus.com>
69 * i860-dis.c: New file.
70 (print_insn_i860): New function.
71 (print_br_address): New function.
72 (sign_extend): New function.
73 (BITWISE_OP): New macro.
74 (I860_REG_PREFIX): New macro.
75 (grnames, frnames, crnames): New structures.
77 * disassemble.c (ARCH_i860): Define.
78 (disassembler): Add check for bfd_arch_i860 to set disassemble
79 function to print_insn_i860.
81 * Makefile.in (CFILES): Added i860-dis.c.
82 (ALL_MACHINES): Added i860-dis.lo.
83 (i860-dis.lo): New dependences.
85 * configure.in: New bits for bfd_i860_arch.
87 * configure: Regenerated.
89 2000-07-20 Hans-Peter Nilsson <hp@axis.com>
91 * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
92 (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
93 (cris-dis.lo, cris-opc.lo): New rules.
94 * Makefile.in: Rebuild.
95 * configure.in (bfd_cris_arch): New target.
97 * disassemble.c (ARCH_cris): Define.
98 (disassembler): Support ARCH_cris.
99 * cris-dis.c, cris-opc.c: New files.
100 * po/POTFILES.in, po/opcodes.pot: Regenerate.
102 2000-07-11 Jakub Jelinek <jakub@redhat.com>
104 * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
105 Reported by Bill Clarke <llib@computer.org>.
107 2000-07-09 Geoffrey Keating <geoffk@cygnus.com>
109 * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
110 Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
112 2000-07-09 Alan Modra <alan@linuxcare.com.au>
114 * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
115 fput_const, extract_3, extract_5_load, extract_5_store,
116 extract_5r_store, extract_5R_store, extract_10U_store,
117 extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
118 extract_12, extract_17, extract_22): Prototype.
119 (print_insn_hppa): Rename inner block opcode -> opc to avoid
120 shadowing outer block.
123 2000-07-05 DJ Delorie <dj@redhat.com>
127 2000-07-04 Alexandre Oliva <aoliva@redhat.com>
129 * arm-dis.c (print_insn_arm): Output combinations of PSR flags.
131 2000-07-03 Marek Michalkiewicz <marekm@linux.org.pl>
133 * avr-dis.c (avr_operand): Change _ () to _() around all strings
134 marked for translation (exception from the usual coding style).
135 (print_insn_avr): Initialize insn2 to avoid warnings.
137 2000-07-03 Kazu Hirata <kazu@hxi.com>
139 * h8300-dis.c (bfd_h8_disassemble): Improve readability.
140 * h8500-dis.c: Fix formatting.
142 2000-07-01 Alan Modra <alan@linuxcare.com.au>
144 * Makefile.am (DEP): Fix 2000-06-22. grep after running dep.sed
145 (CLEANFILES): Add DEPA.
146 * Makefile.in: Regenerate.
148 2000-06-26 Scott Bambrough <scottb@netwinder.org>
150 * arm-dis.c (regnames): Add an additional register set to match
151 the set used by GCC. Make it the default.
153 2000-06-22 Alan Modra <alan@linuxcare.com.au>
155 * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
157 * Makefile.in: Regenerate.
159 2000-06-20 H.J. Lu <hjl@gnu.org>
161 * Makefile.am: Rebuild dependency.
162 * Makefile.in: Rebuild.
164 2000-06-18 Stephane Carrez <stcarrez@worldnet.fr>
166 * Makefile.in, configure: regenerate
167 * disassemble.c (disassembler): Recognize ARCH_m68hc12,
169 * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
171 * configure.in: Recognize m68hc12 and m68hc11.
172 * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
173 * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
174 and opcode generation for m68hc11 and m68hc12.
176 2000-06-16 Nick Duffek <nsd@redhat.com>
178 * disassemble.c (disassembler): Refer to the PowerPC 620 using
179 bfd_mach_ppc_620 instead of 620.
181 2000-06-12 Kazu Hirata <kazu@hxi.com>
183 * h8300-dis.c: Fix formatting.
184 (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
187 Fri Jun 9 21:49:02 2000 Denis Chertykov <denisc@overta.ru>
189 * avr-dis.c (avr_operand): Bugfix for jmp/call address.
191 Wed Jun 7 21:36:45 2000 Denis Chertykov <denisc@overta.ru>
193 * avr-dis.c: completely rewritten.
195 2000-06-02 Kazu Hirata <kazu@hxi.com>
197 * h8300-dis.c: Follow the GNU coding style.
198 (bfd_h8_disassemble) Fix a typo.
200 2000-06-01 Kazu Hirata <kazu@hxi.com>
202 * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
203 (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
204 correctly. Fix a typo.
206 2000-05-31 Nick Clifton <nickc@cygnus.com>
208 * opintl.h (_(String)): Explain why dgettext is used instead of
211 2000-05-30 Nick Clifton <nickc@cygnus.com>
213 * opintl.h (gettext, dgettext, dcgettext, textdomain,
214 bindtextdomain): Replace defines with those from intl/libgettext.h
215 to quieten gcc warnings.
217 2000-05-26 Alan Modra <alan@linuxcare.com.au>
219 * Makefile.am: Update dependencies with "make dep-am"
220 * Makefile.in: Regenerate.
222 Thu May 25 22:53:20 2000 Alexandre Oliva <aoliva@cygnus.com>
224 * m10300-dis.c (disassemble): Don't assume 32-bit longs when
225 sign-extending operands.
227 Mon May 15 15:18:07 2000 Donald Lindsay <dlindsay@cygnus.com>
229 * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
232 2000-05-21 Nick Clifton <nickc@cygnus.com>
234 * Makefile.am (LIBIBERTY): Define.
236 Fri May 19 12:29:27 EDT 2000 Diego Novillo <dnovillo@redhat.com>
238 * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
239 (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
240 (reg_names): Rename to std_reg_names. Change it to a char **
242 (std_reg_names): New name for reg_names.
243 (set_mips_isa_type): Set reg_names to point to std_reg_names by
246 2000-05-16 Frank Ch. Eigler <fche@redhat.com>
248 * fr30-desc.h: Partially regenerated to account for changed
249 CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
250 * m32r-desc.h: Ditto.
252 2000-05-15 Nick Clifton <nickc@cygnus.com>
254 * arm-opc.h: Use upper case for flasg in MSR and MRS
255 instructions. Allow any bit to be set in the field_mask of
258 * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
259 field_mask of an MSR instruction.
261 2000-05-11 Thomas de Lellis <tdel@windriver.com>
263 * arm-opc.c: Disassembly of thumb ldsb/ldsh
264 instructions changed to ldrsb/ldrsh.
266 2000-05-11 Ulf Carlsson <ulfc@engr.sgi.com>
268 * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
269 target addresses for 'jal' and 'j'.
271 2000-05-10 Geoff Keating <geoffk@cygnus.com>
273 * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
274 also available in common mode when powerpc syntax is being used.
276 2000-05-08 Alan Modra <alan@linuxcare.com.au>
278 * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
279 (dummy_print_address): Ditto.
281 2000-05-04 Timothy Wall <twall@cygnus.com>
285 * disassemble.c (disassembler): Add ARCH_tic54x.
286 * configure.in: Added tic54x target.
288 * Makefile.am: Add tic54x dependencies.
289 * Makefile.in: Ditto.
291 2000-05-03 J.T. Conklin <jtc@redback.com>
293 * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
294 vector unit operands.
295 (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
296 unit instruction formats.
297 (PPCVEC): New macro, mask for vector instructions.
298 (powerpc_operands): Add table entries for above operand types.
299 (powerpc_opcodes): Add table entries for vector instructions.
301 * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
302 (print_insn_little_powerpc): Likewise.
303 (print_insn_powerpc): Prepend 'v' when printing vector registers.
305 Sun Apr 23 17:54:14 2000 Denis Chertykov <denisc@overta.ru>
307 * avr-dis.c (reg_fmul_d): New. Extract destination register from
309 (reg_fmul_r): New. Extract source register from FMUL instruction.
310 (reg_muls_d): New. Extract destination register from MULS instruction.
311 (reg_muls_r): New. Extract source register from MULS instruction.
312 (reg_movw_d): New. Extract destination register from MOVW instruction.
313 (reg_movw_r): New. Extract source register from MOVW instruction.
314 (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
315 EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
317 Mon Apr 24 15:21:35 2000 Clinton Popetz <cpopetz@cygnus.com>
319 * configure.in: Add bfd_powerpc_64_arch.
320 * disassemble.c (disassembler): Use print_insn_big_powerpc for
323 2000-04-24 Nick Clifton <nickc@cygnus.com>
325 * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
328 2000-04-22 Timothy Wall <twall@cygnus.com>
330 * ia64-gen.c (general): Add an ordered table of primary
331 opcode names, as well as priority fields to disassembly data
332 structures to enforce a preferred disassembly format based on the
333 ordering of the opcode tables.
334 (load_insn_classes): Show a useful message if IC tables are missing.
335 (load_depfile): Ditto.
336 * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
337 distinguish preferred disassembly.
338 * ia64-opc-f.c: Reorder some insn for preferred disassembly
339 format. Fix incorrect flag on fma.s/fma.s.s0.
340 * ia64-opc.c: Scan *all* disassembly matches and use the one with
341 the highest priority.
342 * ia64-opc-b.c: Use more abbreviations.
343 * ia64-asmtab.c: Regenerate.
345 Fri Apr 21 16:03:39 2000 Jason Eckhardt <jle@cygnus.com>
347 * hppa-dis.c (extract_16): New function.
348 (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
349 new operand types l,y,&,fe,fE,fx.
351 Fri Apr 21 13:20:53 2000 Richard Henderson <rth@cygnus.com>
352 David Mosberger <davidm@hpl.hp.com>
353 Timothy Wall <twall@cygnus.com>
354 Bob Manson <manson@charmed.cygnus.com>
355 Jim Wilson <wilson@cygnus.com>
357 * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
358 (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
359 ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
361 (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
362 (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
363 ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
364 * Makefile.in: Rebuild.
366 * configure.in (bfd_ia64_arch): New target.
367 * disassemble.c (ARCH_ia64): Define.
368 (disassembler): Support ARCH_ia64.
369 * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
370 ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
371 ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
372 ia64-war.tbl, ia64-waw.tbl): New files.
374 2000-04-20 Alexandre Oliva <aoliva@cygnus.com>
376 * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
377 (disassemble): Use them.
379 2000-04-14 Alan Modra <alan@linuxcare.com.au>
381 * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
382 * Makefile.am: Update dependencies.
383 * Makefile.in: Regenerate.
385 2000-04-14 Michael Sokolov <msokolov@ivan.Harhan.ORG>
387 * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
388 avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
389 disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
390 i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
391 m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
392 mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
393 ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
394 tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
395 w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h. Remove
396 ansidecl.h as sysdep.h includes it.
398 Fri Apr 7 15:56:57 2000 Andrew Cagney <cagney@b1.cygnus.com>
400 * configure.in (WARN_CFLAGS): Set to -W -Wall by default. Add
401 --enable-build-warnings option.
402 * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
403 * Makefile.in, configure: Re-generate.
405 Wed Apr 5 22:28:18 2000 J"orn Rennecke <amylaar@cygnus.co.uk>
407 * sh-opc.c (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
408 stc GBR,@-<REG_N> is available for arch_sh1_up.
409 Group parallel processing insn with identical mnemonics together.
410 Make three-operand psha / pshl come first.
412 Wed Apr 5 22:05:40 2000 J"orn Rennecke <amylaar@cygnus.co.uk>
414 * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
415 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
416 (sh_arg_type): Add A_PC.
417 (sh_table): Update entries using immediates. Add repeat.
418 * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
419 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
421 2000-04-04 Alan Modra <alan@linuxcare.com.au>
423 * po/opcodes.pot: Regenerate.
425 * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
426 (DEP): Quote when passing vars to sub-make. Add warning message
428 (DEP1): Rewrite for "gcc -MM".
429 (CLEANFILES): Add DEP2.
431 * Makefile.in: Regenerate.
433 2000-04-03 Denis Chertykov <denisc@overta.ru>
435 * avr-dis.c: Syntax cleanup.
436 (add0fff): Print the pc relative address as a signed number.
439 2000-04-01 Ian Lance Taylor <ian@zembu.com>
441 * disassemble.c (disassembler_usage): Don't use a prototype. Mark
442 the parameter ATTRIBUTE_UNUSED.
443 * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
445 2000-04-01 Alexandre Oliva <aoliva@cygnus.com>
447 * m10300-opc.c: SP-based offsets are always unsigned.
449 2000-03-29 Thomas de Lellis <tdel@windriver.com>
451 * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
452 [branch always] instead of "undefined".
454 2000-03-27 Nick Clifton <nickc@cygnus.com>
456 * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
457 short instructions, from end of list of long instructions.
459 2000-03-27 Ian Lance Taylor <ian@zembu.com>
461 * Makefile.am (CFILES): Add avr-dis.c.
462 (ALL_MACHINES): Add avr-dis.lo.
464 2000-03-27 Alan Modra <alan@linuxcare.com>
466 * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
468 (print_insn_avr): Call function via pointer in K&R compatible way.
469 (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
470 add0fff, add03f8): Convert to old style function declaration and
472 (avrdis_opcode): Add prototype.
474 2000-03-27 Denis Chertykov <denisc@overta.ru>
476 * avr-dis.c: New file. AVR disassembler.
477 * configure.in (bfd_avr_arch): New architecture support.
478 * disassemble.c: Likewise.
479 * configure: Regenerate.
481 Mon Mar 6 19:52:05 2000 J"orn Rennecke <amylaar@cygnus.co.uk>
483 * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
485 2000-03-02 J"orn Rennecke <amylaar@cygnus.co.uk>
487 * d30v-dis.c (print_insn): Remove d*i hacks. Use per-operand
488 flag to determine if operand is pc-relative.
491 (REL6S3): Renamed from IMM6S3.
492 Added flag OPERAND_PCREL.
493 (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
494 added flag OPERAND_PCREL.
495 (IMM12S3U): Replaced with REL12S3.
496 (SHORT_D2, LONG_D): Delay target is pc-relative.
497 (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
498 Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
499 using the REL* operands.
500 (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
501 (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
502 LONG_Db, using REL* operands.
503 (SHORT_U, SHORT_A5S): Removed stray alternatives.
504 (d30v_opcode_table): Use new *r formats.
506 2000-02-28 Nick Clifton <nickc@cygnus.com>
508 * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
509 'signed_overflow_ok_p'.
511 2000-02-27 Eli Zaretskii <eliz@is.elta.co.il>
513 * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
514 name of the libtool directory.
515 * Makefile.in: Rebuild.
517 2000-02-24 Nick Clifton <nickc@cygnus.com>
519 * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
520 (cgen_clear_signed_overflow_ok): New function.
521 (cgen_signed_overflow_ok_p): New function.
523 2000-02-23 Andrew Haley <aph@cygnus.com>
525 * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
526 m32r-ibld.c,m32r-opc.h: Rebuild.
528 2000-02-23 Linas Vepstas <linas@linas.org>
530 * i370-dis.c, i370-opc.c: New.
532 * disassemble.c (ARCH_i370): Define.
533 (disassembler): Handle it.
535 * Makefile.am: Add support for Linux/IBM 370.
536 * configure.in: Likewise.
538 * Makefile.in: Regenerate.
539 * configure: Likewise.
541 2000-02-22 Chandra Chavva <cchavva@cygnus.com>
543 * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
544 ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
547 1999-12-30 Andrew Haley <aph@cygnus.com>
549 * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
551 * mips-opc.c (G6): New define.
552 (mips_builtin_op): Add "move" definition for -gp32.
554 2000-02-22 Ian Lance Taylor <ian@zembu.com>
556 From Grant Erickson <gerickso@Brocade.COM>:
557 * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
559 2000-02-21 Alan Modra <alan@spri.levels.unisa.edu.au>
561 * dis-buf.c (buffer_read_memory): Change `length' param and all int
564 Thu Feb 17 00:18:12 2000 J"orn Rennecke <amylaar@cygnus.co.uk>
566 * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
567 (print_insn_ppi): Likewise.
568 (print_insn_shx): Use info->mach to select appropriate insn set.
569 Add support for sh-dsp. Remove FD_REG_N support.
570 * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
571 (sh_arg_type): Likewise. Remove FD_REG_N.
572 (sh_dsp_reg_nums): New enum.
573 (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
574 (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
575 (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
576 (arch_sh3_dsp_up): Likewise.
577 (sh_opcode_info): New field: arch.
578 (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
579 D_REG_N. Fill in arch field. Add sh-dsp insns.
581 2000-02-14 Fernando Nasser <fnasser@totem.to.cygnus.com>
583 * arm-dis.c: Change flavor name from atpcs-special to
584 special-atpcs to prevent name conflict in gdb.
585 (get_arm_regname_num_options, set_arm_regname_option,
586 get_arm_regnames): New functions. API to access the several
587 flavor of register names. Note: Used by gdb.
588 (print_insn_thumb): Use the register name entry from the currently
589 selected flavor for LR and PC.
591 2000-02-10 Nick Clifton <nickc@cygnus.com>
593 * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
595 (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
596 "mulsh.h" instructions.
597 * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
599 (print_insn_mcore): Add support for little endian targets.
600 Add support for MULSH and OPSR classes.
602 2000-02-07 Nick Clifton <nickc@cygnus.com>
604 * arm-dis.c (parse_arm_diassembler_option): Rename again.
605 Previous delat did not take.
607 2000-02-03 Timothy Wall <twall@redhat.com>
609 * dis-buf.c (buffer_read_memory): Use octets_per_byte field
610 to adjust target address bounds checking and calculate the
611 appropriate octet offset into data.
613 2000-01-27 Nick Clifton <nickc@redhat.com>
615 * arm-dis.c: (parse_disassembler_option): Rename to
616 parse_arm_disassembler_option and allow to be exported.
618 * disassemble.c (disassembler_usage): New function: Print out any
619 target specific disassembler options.
620 Call arm_disassembler_options() if the ARM architecture is being
623 * arm-dis.c (NUM_ELEM): Define this macro if not already
625 (arm_regname): New struct type for ARM register names.
626 (arm_toggle_regnames): Delete.
627 (parse_disassembler_option): Use register name structure.
628 (print_insn): New function: Combines duplicate code found in
629 print_insn_big_arm and print_insn_little_arm.
630 (print_insn_big_arm): Call print_insn.
631 (print_insn_little_arm): Call print_insn.
632 (print_arm_disassembler_options): Display list of supported,
633 ARM specific disassembler options.
635 2000-01-27 Thomas de Lellis <tdel@windriver.com>
637 * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
638 ARM_STT_16BIT flag as Thumb code symbols.
640 * arm-dis.c (printf_insn_little_arm): Ditto.
642 2000-01-25 Thomas de Lellis <tdel@windriver.com>
644 * arm-dis.c (printf_insn_thumb): Prevent double dumping
645 of raw thumb instructions.
647 2000-01-20 Nick Clifton <nickc@cygnus.com>
649 * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
651 2000-01-03 Nick Clifton <nickc@cygnus.com>
653 * arm-dis.c (streq): New macro.
655 (force_thumb): ew local variable.
656 (parse_disassembler_option): New function: Parse a single, ARM
657 specific disassembler command line switch.
658 (parse_disassembler_option): Call parse_disassembler_option to
659 parse individual command line switches.
660 (print_insn_big_arm): Check force_thumb.
661 (print_insn_little_arm): Check force_thumb.
663 1999-12-27 Alan Modra <alan@spri.levels.unisa.edu.au>
665 * i386-dis.c (grps[]): Correct GRP5 FF/3 from "call" to "lcall".
667 Wed Dec 1 03:34:53 1999 Jeffrey A Law (law@cygnus.com)
669 * m10300-opc.c, m10300-dis.c: Add am33 support.
671 Wed Nov 24 20:29:58 1999 Jeffrey A Law (law@cygnus.com)
673 * hppa-dis.c (unit_cond_names): Add PA2.0 unit condition names.
674 (print_insn_hppa): Handle 'B' operand.
676 1999-11-22 Nick Clifton <nickc@cygnus.com>
678 * d10v-opc.c: Fix pattern for "cpfg,f{0|1},c" instruction.
680 1999-11-18 Gavin Romig-Koch <gavin@cygnus.com>
682 * mips-opc.c (I5): New.
683 (abs.ps,add.ps,alnv.ps,c.COND.ps,cvt.s.pl,cvt.s.pu,cvt.ps.s
684 madd.ps,movf.ps,movt.ps,mul.ps,net.ps,nmadd.ps,nmsub.ps,
685 pll.ps,plu.ps,pul.ps,puu.ps,sub.ps,suxc1,luxc1): New.
687 Mon Nov 15 19:34:58 1999 Donald Lindsay <dlindsay@cygnus.com>
689 * arm-dis.c (print_insn_arm): Added general purpose 'X' format.
690 * arm-opc.h (print_insn_arm): Added comment documenting
691 the 'X' format just added to arm-dis.c.
693 1999-11-15 Gavin Romig-Koch <gavin@cygnus.com>
695 * mips-opc.c (la): Create a version that just uses addiu directly.
696 (dla): Expand to daddiu if possible.
698 1999-11-11 Nick Clifton <nickc@cygnus.com>
700 * mips-opc.c: Add ssnop pattern.
702 1999-11-01 Gavin Romig-Koch <gavin@cygnus.com>
704 * mips-dis.c (_print_insn_mips): Use OPCODE_IS_MEMBER.
706 1999-10-29 Nick Clifton <nickc@cygnus.com>
708 * d30v-opc.c (mvtacc): Use format SHORT_AR not SHORT_AA
709 (d30v_format_tab): Define the SHORT_AR format.
711 1999-10-28 Nick Clifton <nickc@cygnus.com>
713 * mcore-dis.c: Remove spurious code introduced in previous delta.
715 1999-10-27 Scott Bambrough <scottb@netwinder.org>
717 * arm-dis.c: Include sysdep.h to prevent compile time warnings.
719 1999-10-18 Michael Meissner <meissner@cygnus.com>
721 * alpha-opc.c (alpha_operands): Fill in missing initializer.
722 (alpha_num_operands): Convert to unsigned.
723 (alpha_num_opcodes): Ditto.
724 (insert_rba): Declare unused arguments ATTRIBUTE_UNUSED.
729 (extract_bdisp): Ditto.
730 (extract_jhint): Ditto.
731 (extract_ev6hwjhint): Ditto.
733 Sun Oct 10 01:48:01 1999 Jerry Quinn <jerry.quinn.adv91@alum.dartmouth.org>
735 * hppa-dis.c (print_insn_hppa): Add new codes 'cc', 'cd', 'cC',
738 * hppa-dis.c (print_insn_hppa): Removed unused args. Fix '?W'.
740 * hppa-dis.c (print_insn_hppa): Implement codes "?N", "?Q".
742 Thu Oct 7 00:12:43 MDT 1999 Diego Novillo <dnovillo@cygnus.com>
744 * d10v-opc.c (d10v_operands): Add RESTRICTED_NUM3 flag for
745 rac/rachi instructions.
746 (d10v_opcodes): Added seven new instructions ld, ld2w, sac, sachi,
749 1999-10-04 Doug Evans <devans@casey.cygnus.com>
751 * fr30-asm.c,fr30-desc.h: Rebuild.
752 * m32r-asm.c,m32r-desc.c,m32r-desc.h: Rebuild. Add m32rx support.
753 * m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h,m32r-opinst.c: Ditto.
755 1999-09-29 Nick Clifton <nickc@cygnus.com>
757 * sh-opc.h: Fix bit patterns for several load and store
760 Thu Sep 23 08:27:20 1999 Jerry Quinn <jerry.quinn.adv91@alum.dartmouth.org
762 * hppa-dis.c (print_insn_hppa): Replace 'B', 'M', 'g' and 'l' with
763 cleaner code using completer prefixes. Add 'Y'.
765 Sun Sep 19 10:41:27 1999 Jeffrey A Law (law@cygnus.com)
767 * hppa-dis.c: (print_insn_hppa): Correct 'cJ', 'cc'.
769 * hppa-dis.c (extract_22): New function.
771 * hppa-dis.c (print_insn_hppa): Handle 'J', 'K', and 'cc'.
773 * hppa-dis.c (print_insn_hppa): Handle 'fe' and 'cJ'.
775 * hppa-dis.c (print_insn_hppa): Handle '#', 'd', and 'cq'.
777 * hppa-dis.c (print_insn_hppa): Handle 'm', 'h', '='.
779 * hppa-dis.c (print_insn_hppa): Handle 'X' operand.
781 * hppa-dis.c (print_insn_hppa): Handle 'B' operand.
783 * hppa-dis.c (print_insn_hppa): Handle 'M' and 'L' operands.
785 * hppa-dis.c (print_insn_hppa): Handle 'l' operand.
787 * hppa-dis.c (print_insn_hppa): Handle 'g' operand.
789 Sat Sep 18 11:36:12 1999 Jeffrey A Law (law@cygnus.com)
791 * hppa-dis.c (print_insn_hppa): Output a space after 'X' completer.
793 * hppa-dis.c: (print_insn_hppa): Do output a space before a 'v'
796 * hppa-dis.c: (print_insn_hppa): Handle 'fX'.
798 * hppa-dis.c: (print_insn_hppa): Add missing break after
801 * hppa-dis.c: Finish constifying various completers, register
804 1999-09-14 Michael Meissner <meissner@cygnus.com>
806 * configure.in (Canonicalization of target names): Remove adding
807 ${CONFIG_SHELL} in front of $ac_config_sub, since autoconfig 2.14
808 generates $ac_config_sub with a ${CONFIG_SHELL} already.
809 * configure: Regenerate.
811 Tue Sep 7 13:50:32 1999 Jeffrey A Law (law@cygnus.com)
813 * hppa-dis.c (print_insn_hppa): Escape '%' in output strings.
815 * hppa-dis.c (print_insn_hppa): Handle 'Z' argument.
817 1999-09-07 Nick Clifton <nickc@cygnus.com>
819 * sh-opc.h: Add mulu.w and muls.w patterns. These are the correct
820 names for the mulu and muls patterns.
822 1999-09-04 Steve Chamberlain <sac@pobox.com>
824 * pj-opc.c: New file.
825 * pj-dis.c: New file.
826 * disassemble.c (disassembler): Handle bfd_arch_pj.
827 * configure.in: Handle bfd_pj_arch.
828 * Makefile.am: Rebuild dependencies.
829 (CFILES): Add pj-dis.c and pj-opc.c.
830 (ALL_MACHINES): Add pj-dis.lo and pj-opc.lo.
831 * configure, Makefile.in: Rebuild.
833 1999-09-04 H.J. Lu <hjl@gnu.org>
835 * i386-dis.c (print_insn_i386): Set bytes_per_line to 7.
837 Mon Aug 30 18:56:14 1999 Richard Henderson <rth@cygnus.com>
839 * alpha-opc.c (fetch, fetch_m, ecb, wh64): RA must be R31.
841 1999-08-04 Doug Evans <devans@casey.cygnus.com>
843 * fr30-asm.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
844 * m32r-asm.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
845 * m32r-opinst.c: Rebuild.
847 Sat Aug 28 00:27:24 1999 Jerry Quinn <jquinn@nortelnetworks.com>
849 * hppa-dis.c (print_insn_hppa): Replace 'f' by 'v'. Prefix float
850 register args by 'f'.
852 * hppa-dis.c (print_insn_hppa): Add args q, %, !, and |.
854 * hppa-dis.c (MASK_10, read_write_names, add_compl_names,
855 extract_10U_store): New.
856 (print_insn_hppa): Add new completers.
858 * hppa-dis.c (signed_unsigned_names,mix_half_names,
859 saturation_names): New.
860 (print_insn_hppa): Add completer codes 'a', 'ch', 'cH', 'cS', and 'c*'.
862 * hppa-dis.c (print_insn_hppa): Place completers behind prefix 'c'.
864 * hppa-dis.c (print_insn_hppa): Add cases for '.', '~'. '$'. and '!'
866 * hppa-dis.c (print_insn_hppa): Look at next arg instead of bits
867 to decide to print a space.
869 1999-08-21 Alan Modra <alan@spri.levels.unisa.edu.au>
871 * i386-dis.c: Add AMD athlon instruction support.
873 1999-08-10 Ian Lance Taylor <ian@zembu.com>
875 From Wally Iimura <iimura@microunity.com>:
876 * dis-buf.c (buffer_read_memory): Rewrite expression to avoid
877 overflow at end of address space.
878 (generic_print_address): Use sprintf_vma.
880 1999-08-08 Ian Lance Taylor <ian@zembu.com>
882 * Makefile.am: Rename .dep* files to DEP*. Change DEP variable to
883 MKDEP. Rebuild dependencies.
884 * Makefile.in: Rebuild.
886 Fri Aug 6 09:46:35 1999 Jerry Quinn <jquinn@nortelnetworks.com>
888 * hppa-dis.c (compare_cond_64_names, cmpib_cond_64_names,
889 add_cond_64_names, wide_add_cond_names, logical_cond_64_names,
890 unit_cond_64_names, shift_cond_64_names, bb_cond_64_names): New.
891 (print_insn_hppa): Add 64 bit condition completers.
893 Thu Aug 5 16:59:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
895 * hppa-dis.c (print_insn_hppa): Change condition args to use
898 Wed Jul 28 04:33:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
900 * hppa-dis.c (print_insn_hppa): Remove unnecessary test in 'E'
903 1999-07-21 Ian Lance Taylor <ian@zembu.com>
906 * configure.bat: Remove; obsolete.
908 1999-07-11 Ian Lance Taylor <ian@zembu.com>
910 * dis-buf.c: Add ATTRIBUTE_UNUSED as appropriate.
911 (generic_strcat_address): Add cast to avoid warning.
912 * i386-dis.c: Initialize all structure fields to avoid warnings.
913 Add ATTRIBUTE_UNUSED as appropriate.
915 1999-07-08 Jakub Jelinek <jj@ultra.linux.cz>
917 * sparc-dis.c (print_insn_sparc): Differentiate between
918 addition and oring when guessing symbol for comment.
920 1999-07-05 Nick Clifton <nickc@cygnus.com>
922 * arm-dis.c (print_insn_arm): Display hex equivalent of rotated
925 1999-06-23 Alan Modra <alan@spri.levels.unisa.edu.au>
927 * i386-dis.c: Mention intel mode specials in macro char comment.
929 1999-06-21 Ian Lance Taylor <ian@zembu.com>
931 * alpha-dis.c: Don't include <stdlib.h>.
932 * arm-dis.c: Include "sysdep.h".
933 * tic30-dis.c: Don't include <stdlib.h> or <string.h>. Include
935 * Makefile.am: Rebuild dependencies.
936 * Makefile.in: Rebuild.
938 1999-06-16 Nick Clifton <nickc@cygnus.com>
940 * arm-dis.c (print_insn_arm): Add detection of IMB and IMBRange
943 1999-06-14 Nick Clifton <nickc@cygnus.com> & Drew Mosley <dmoseley@cygnus.com>
945 * arm-dis.c (arm_regnames): Turn into a pointer to a register
947 (arm_regnames_standard): New variable: Array of ARM register
948 names according to ARM instruction set nomenclature.
949 (arm_regnames_apcs): New variable: Array of ARM register names
950 according to ARM Procedure Call Standard.
951 (arm_regnames_raw): New variable: Array of ARM register names
952 using just 'r' and the register number.
953 (arm_toggle_regnames): New function: Toggle the chosen register set
955 (parse_disassembler_options): New function: Parse any target
956 disassembler command line options.
957 (print_insn_big_arm): Call parse_disassembler_options if any
959 (print_insn_little_arm): Call parse_disassembler_options if any
962 1999-06-13 Ian Lance Taylor <ian@zembu.com>
964 * i386-dis.c (FWAIT_OPCODE): Define.
965 (used_prefixes): New static variable.
966 (fetch_data): Don't print an error message if we have already
967 fetched some bytes successfully.
968 (ckprefix): Clear used_prefixes. Use FWAIT_OPCODE, not 0x9b.
969 (prefix_name): New static function.
970 (print_insn_i386): If setjmp fails, indicating a data error, but
971 we have managed to fetch some bytes, print the first one as a
972 prefix or a .byte pseudo-op. If fwait is followed by a non
973 floating point instruction, print the first prefix. Set
974 used_prefixes when prefixes are used. If any prefixes were not
975 used after disassembling the instruction, print the first prefix
976 instead of printing the instruction.
977 (putop): Set used_prefixes when prefixes are used.
978 (append_seg, OP_E, OP_G, OP_REG, OP_I, OP_sI, OP_J): Likewise.
979 (OP_DIR, OP_SIMD_Suffix): Likewise.
981 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
983 * sparc-opc.c: Fix up set, setsw, setuw operand kinds.
984 Support signx %reg, clruw %reg.
986 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
988 * sparc-opc.c: Add aliases Solaris as supports.
990 Mon Jun 7 12:04:52 1999 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
992 * Makefile.am (CFILES): Add arc-{dis,opc}.c and v850-{dis,opc}.c.
993 * Makefile.in: Regenerated.
995 1999-06-03 Philip Blundell <philb@gnu.org>
997 * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
998 when target is PC-relative.
1000 1999-05-28 Linus Nordberg <linus.nordberg@canit.se>
1002 * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC. Add MACM/MSACM. Add
1005 * m68k-dis.c (fetch_arg): Add places `n', `o'.
1007 * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
1008 Add mcf5206e to appropriate instructions.
1009 Add alias for MAC, MSAC.
1011 * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
1014 * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
1015 macw, remsl, remul for mcf5307. Change mcf5200 --> mcf.
1017 * m68k-dis.c: Add format `u' and places `h', `m', `M'.
1019 1999-05-18 Alan Modra <alan@spri.levels.unisa.edu.au>
1021 * i386-dis.c (Ed): Define.
1022 (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
1024 (OP_rm): Rename to OP_Rd.
1027 (putop): Add const to template and p.
1028 (print_insn_x86): Delete.
1029 (print_insn_i386): Merge old function print_insn_x86. Add const
1031 (struct dis386): Add const to name.
1032 (dis386_att, dis386_intel): Add const.
1033 (dis386_twobyte_att, dis386_twobyte_intel): Add const.
1034 (names32, names16, names8, names_seg, index16): Add const.
1035 (grps, prefix_user_table, float_reg): Add const.
1036 (float_mem_att, float_mem_intel): Add const.
1037 (oappend): Add const to s.
1038 (OP_REG): Add const to s.
1039 (ptr_reg): Add const to s.
1040 (dofloat): Add const to dp.
1041 (OP_C): Don't skip modrm, it's now done in OP_Rd.
1044 (OP_Rd): Check for valid mod. Call Op_E to print.
1045 (OP_E): Handle d_mode arg. Check for bad sfence,lea,lds etc.
1046 (OP_MS): Check for valid mod. Call Op_EM to print.
1047 (OP_3DNowSuffix): Set obufp and use oappend rather than
1048 strcat. Call BadOp() for errors.
1049 (OP_SIMD_Suffix): Likewise.
1050 (BadOp): New function.
1052 1999-05-12 Alan Modra <alan@spri.levels.unisa.edu.au>
1054 * i386-dis.c (dis386_intel): Remove macro chars, except for
1055 jEcxz. Change cWtR and cRtd to cW and cR.
1056 (dis386_twobyte_intel): Remove macro chars here too.
1057 (putop): Handle R and W macros for intel mode.
1059 * i386-dis.c (SIMD_Fixup): New function.
1060 (dis386_twobyte_att): Use it on movlps and movhps, and change
1061 Ev to EX on these insns. Change movmskps Ev, XM to Gv, EX.
1062 (dis386_twobyte_intel): Same here.
1064 * i386-dis.c (Av): Remove.
1068 (OP_SIMD_Suffix): New function.
1069 (OP_DIR): Remove dead code.
1070 (eAX_reg..eDI_reg): Renumber.
1071 (onebyte_has_modrm): Table numbering comments.
1072 (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
1073 (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
1074 checks. Print error on invalid dp->bytemode2. Remove simd_cmp,
1075 and handle SIMD cmp insns in OP_SIMD_Suffix.
1076 (info->bytes_per_line): Bump from 5 to 6.
1078 (OP_E): Use INTERNAL_DISASSEMBLER_ERROR. Handle sfence.
1079 (OP_3DNowSuffix): Ensure mnemonic index unsigned.
1081 PIII SIMD support from Doug Ledford <dledford@redhat.com>
1082 * i386-dis.c (XM, EX, None): Define.
1083 (OP_XMM, OP_EX, OP_None): New functions.
1084 (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
1085 (GRP14): Rename to GRPAMD.
1086 (GRP*): Add USE_GROUPS flag.
1088 (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
1089 (twobyte_has_modrm): Add SIMD entries.
1090 (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
1091 (grps): Add SIMD insns.
1092 (print_insn_x86): New vars uses_f3_prefix and simd_cmp. Don't
1093 oappend repz if uses_f3_prefix. Add code to handle new groups for
1096 From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
1097 * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
1098 operand from Av to Jv.
1100 1999-05-07 Nick Clifton <nickc@cygnus.com>
1102 * mcore-dis.c (print_insn_mcore): Use .short to display
1103 unidentified instructions, not .word.
1105 1999-04-26 Tom Tromey <tromey@cygnus.com>
1107 * aclocal.m4, configure: Updated for new version of libtool.
1109 1999-04-14 Doug Evans <devans@casey.cygnus.com>
1111 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
1112 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
1114 Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
1116 * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
1119 1999-04-10 Doug Evans <devans@casey.cygnus.com>
1121 * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
1122 * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
1124 1999-04-06 Ian Lance Taylor <ian@zembu.com>
1126 * opintl.h (LC_MESSAGES): Never define.
1128 1999-04-04 Ian Lance Taylor <ian@zembu.com>
1130 * i386-dis.c (intel_syntax, open_char, close_char): Make static.
1131 (separator_char, scale_char): Likewise.
1132 (print_insn_x86): Likewise.
1133 (print_insn_i386): Likewise. Add declaration.
1135 1999-03-26 Doug Evans <devans@casey.cygnus.com>
1137 * fr30-dis.c: Rebuild.
1138 * m32r-dis.c: Rebuild.
1140 1999-03-23 Ian Lance Taylor <ian@zembu.com>
1142 * m68k-opc.c: Change compare instructions to use "@s" rather than
1143 ";s" when used with an immediate operand.
1145 1999-03-22 Doug Evans <devans@casey.cygnus.com>
1147 * cgen-opc.c (cgen_set_cpu): Delete.
1148 (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
1149 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
1151 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
1153 * po/opcodes.pot: Rebuild.
1155 1999-03-16 Martin Hunt <hunt@cygnus.com>
1157 * d30v-opc.c (mvtsys): Remove FLAG_LKR.
1159 1999-03-11 Doug Evans <devans@casey.cygnus.com>
1161 * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
1162 (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
1163 (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
1164 * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
1165 * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
1166 * m32r-opinst.c: Rebuild.
1168 1999-02-25 Doug Evans <devans@casey.cygnus.com>
1170 * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
1171 (cgen_hw_lookup_by_num): Rewrite.
1172 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
1173 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
1174 * m32r-opinst.c: Rebuild.
1176 Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
1178 * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
1179 (insert_jhint): Fix insertion mask.
1180 * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
1182 1999-02-10 Doug Evans <devans@casey.cygnus.com>
1184 * Makefile.in: Rebuild.
1186 1999-02-09 Doug Evans <devans@casey.cygnus.com>
1188 * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
1189 * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
1190 * Makefile.am: Remove references to them.
1191 (HFILES): Add fr30-desc.h,m32r-desc.h.
1192 (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
1194 (ALL_MACHINES): Update.
1195 * configure.in: Redo handling of cgen_files.
1196 (bfd_i960_arch): Delete i960c-*.lo files.
1197 * configure: Regenerate.
1198 * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
1199 (hash_insn_array): Rewrite.
1200 * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
1201 (hash_insn_array): Rewrite.
1202 * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
1203 (cgen_lookup_insn,cgen_get_insn_operands): Define here.
1204 (cgen_lookup_get_insn_operands): Ditto.
1205 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
1206 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
1207 * po/POTFILES.in: Rebuild.
1208 * po/opcodes.pot: Rebuild.
1210 Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
1212 * Makefile.am: Rebuild dependencies.
1213 (HFILES): Add fr30-opc.h.
1214 (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
1215 * Makefile.in: Rebuild.
1217 * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
1218 Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
1220 * acconfig.h: Remove.
1221 * configure: Rebuild with current autoconf/automake.
1222 * aclocal.m4: Likewise.
1223 * config.in: Likewise.
1224 * Makefile.in: Likewise.
1226 Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
1228 * m68k-opc.c: Correct move (not movew) to status word on 5200.
1230 Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
1232 * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
1233 * i386-dis.c (x_mode): Define.
1236 (dis386_intel): New.
1237 (dis386_twobyte): Remove.
1238 (dis386_twobyte_att): New.
1239 (dis386_twobyte_intel): New.
1240 (print_insn_x86): Use new arrays.
1241 (float_mem): Remove.
1242 (float_mem_intel): New.
1243 (float_mem_att): New.
1244 (dofloat): Use new float_mem arrays.
1245 (print_insn_i386_att): New.
1246 (print_insn_i386_intel): New.
1247 (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
1248 (putop): Handle intel syntax.
1249 (OP_indirE): Handle intel syntax.
1250 (OP_E): Handle intel syntax.
1251 (OP_I): Handle intel syntax.
1252 (OP_sI): Handle intel syntax.
1253 (OP_OFF): Handle intel syntax.
1255 1999-01-27 Doug Evans <devans@casey.cygnus.com>
1257 * fr30-opc.h,fr30-opc.c: Rebuild.
1258 * i960c-opc.h,i960c-opc.c: Rebuild.
1259 * m32r-opc.c: Rebuild.
1261 Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
1263 * hppa-dis.c: revert HP merge changes until HP gives us
1266 1999-01-19 Nick Clifton <nickc@cygnus.com>
1268 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
1269 offsets as well as symbloic address.
1271 Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
1273 * hppa-dis.c: fix comments and some indentation.
1275 1999-01-12 Doug Evans <devans@casey.cygnus.com>
1277 * fr30-opc.c,i960c-opc.c: Regenerate.
1279 1999-01-11 Doug Evans <devans@casey.cygnus.com>
1281 * fr30-opc.c: Regenerate.
1283 1999-01-06 Doug Evans <devans@casey.cygnus.com>
1285 * m32r-dis.c: Regenerate.
1287 1999-01-05 Doug Evans <devans@casey.cygnus.com>
1289 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
1290 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
1291 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1293 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
1295 * configure.in: Require autoconf 2.12.1 or higher.
1297 1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
1299 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
1301 Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
1303 * fr30-opc.c: Regenerated.
1305 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
1307 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
1309 1998-12-15 Dave Brolley <brolley@cygnus.com>
1311 * fr30-opc.c,fr30-opc.h: Regenerated.
1313 1998-12-14 Dave Brolley <brolley@cygnus.com>
1315 * fr30-opc.c,fr30-opc.h: Regenerated.
1317 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
1319 * fr30-opc.c,fr30-opc.h: Regenerated.
1321 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
1323 * m32r-opc.c: Regenerate.
1325 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
1327 * dis-buf.c (generic_strcat_address): reformat to GNU coding
1328 conventions. change sprintf call to an sprintf_vma call.
1330 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
1332 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
1334 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
1336 The following changes were made by
1337 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
1338 David Taylor <taylor@texas.cygnus.com>, and
1339 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
1340 merge in changes by HP; HP did not create ChangeLog entries.
1342 * dis-buf.c (generic_strcat_address): new function.
1344 * hppa-dis.c: Changes to improve hppa disassembly.
1345 Changed formatting in : reg_names, fp_reg_names,control_reg,
1346 New variables : sign_extension_names, deposit_names, conversion_names
1347 float_test_names, compare_cond_names_double, add_cond_names_double,
1348 logical_cond_names_double, unit_cond_names_double,
1349 branch_push_pop_names, saturation_names, shift_names, mix_names,
1350 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
1351 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
1352 (fput_const): renamed as fput_hex_const
1354 - use the macros fputs_filtered and
1355 fput_decimal_const whenever possible; calls to sign_extend require
1356 2 params -- add a missing second param of 0.
1357 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
1358 architecture version number of current machine. HP folks are
1359 trying to handle situation where the target program was compiled
1360 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
1362 - added new cases : 'g', 'B', 'm'
1363 - added cases specifically for PA 2.0
1364 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
1365 - calls to fput_const become calls to fput_hex_const
1367 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
1369 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
1370 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
1371 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
1372 * Makefile.in: Rebuilt.
1373 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
1375 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
1376 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
1378 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
1380 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
1382 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
1384 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
1386 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
1387 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
1389 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
1391 * fr30-opc.c: Regenerate.
1393 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
1395 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
1397 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
1399 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
1401 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
1403 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
1405 1998-11-30 Doug Evans <devans@casey.cygnus.com>
1407 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
1408 CGEN_INSN_BASE_VALUE.
1409 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
1410 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
1412 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
1414 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
1416 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
1418 * fr30-asm.c,fr30-dis.c: Regenerated.
1420 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
1422 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
1424 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
1426 * fr30-opc.c: Regenerated.
1428 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
1430 * fr30-opc.c: Regenerated.
1431 * fr30-opc.h: Regenerated.
1432 * fr30-dis.c: Regenerated.
1433 * fr30-asm.c: Regenerated.
1435 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
1437 * mips-opc.c (sync.p,sync.l): Swap insn values.
1439 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
1441 * fr30-opc.c: Regenerate.
1443 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
1445 * fr30-opc.c: Regenerated.
1446 * fr30-opc.h: Regenerated.
1448 1998-11-18 Doug Evans <devans@casey.cygnus.com>
1450 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
1451 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
1453 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
1455 * fr30-opc.c: Regenerated.
1457 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
1459 * fr30-opc.c: Regenerated.
1460 * fr30-opc.h: Regenerated.
1461 * fr30-dis.c: Regenerated.
1462 * fr30-asm.c: Regenerated.
1464 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
1466 * po/opcodes.pot: Regenerated.
1467 * fr30-opc.c: Regenerated.
1468 * fr30-opc.h: Regenerated.
1469 * fr30-dis.c: Regenerated.
1470 * fr30-asm.c: Regenerated.
1472 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
1474 * disassemble.c (disassembler): Add support for FR30 target.
1476 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
1478 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
1479 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
1481 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
1483 * po/opcodes.pot: Regenerate.
1484 * po/POTFILES.in: Regenerate.
1485 * fr30-opc.c: Regenerate.
1486 * fr30-opc.h: Regenerate.
1488 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
1490 * m32r-asm.c: Regenerate.
1492 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
1494 * configure.in: Added case for bfd_fr30_arch.
1495 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
1496 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
1497 (CLEANFILES): Added stamp-fr30.
1499 * fr30-asm.c: New file.
1500 * fr30-dis.c: New file.
1501 * fr30-opc.c: New file.
1502 * fr30-opc.h: New file.
1503 * po/POTFILES.in: Regenerated
1504 * po/opcodes.pot: Regenerated
1506 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
1508 * configure.in: detect cygwin* instead of cygwin32*
1509 * configure: regenerate
1511 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
1513 * mips-opc.c (IS_M): Added.
1515 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
1517 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
1519 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
1521 * m32r-opc.h,m32r-opc.c: Regenerate.
1523 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1525 * i386-dis.c (OP_3DNowSuffix): New static function.
1528 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
1529 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
1530 (insn_codep): New static variable.
1531 (print_insn_x86): Init insn_codep after prefixes.
1532 (grps): Add GRP14 entries for prefetch, prefetchw.
1535 From Jeff B Epler <jepler@usgs.gov>
1536 * i386-dis.c (Suffix3DNow): New table.
1538 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
1540 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
1542 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
1544 * d10v-dis.c (print_operand): If num is nonzero, then
1545 add OPERAND_ACC1, not OPERAND_ACC0.
1547 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
1549 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
1552 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
1554 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
1557 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
1559 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
1561 1998-09-09 Michael Meissner <meissner@cygnus.com>
1563 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
1566 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
1568 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
1570 (print_insn_little_arm): Detect Thumb symbols in elf object
1573 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
1575 * alpha-dis.c (print_insn_alpha): Use the machine type to
1576 decide which PALcode set to include.
1578 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
1580 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
1582 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
1584 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
1585 MSUB and MSUBS instructions.
1587 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
1589 * ppc-opc.c (powerpc_operands): Omit parens around additions in
1590 operand name macros.
1592 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
1594 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
1595 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
1596 +, -, and d for ColdFire.
1598 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
1599 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
1600 (extract_mbe): Likewise.
1602 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
1604 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
1606 * m10300-opc.c: First cut at UDF instructions.
1608 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
1610 * m32r-opc.c: Regenerate (remove semantic descriptions).
1612 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
1614 * arm-dis.c (print_insn_big_arm): Fix indentation.
1615 (print_insn_little_arm): Likewise.
1617 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
1619 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
1621 (print_insn_little_arm): Likewise.
1623 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
1625 Move all global state data into opcode table struct, and treat
1626 opcode table as something that is "opened/closed".
1627 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
1628 (cgen_asm_init): Delete.
1629 (cgen_set_parse_operand_fn): New function.
1630 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
1631 (cgen_dis_init): Delete.
1632 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
1633 (cgen_current_{opcode_table_mach,endian}): Delete.
1634 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
1636 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
1638 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
1641 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
1643 * m10300-opc.c: Add entries for "no_match_operands" field in
1646 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
1648 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
1650 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
1652 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1654 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1656 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
1658 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
1660 (OP_J): Remove unnecessary subtraction when 16-bit displacement
1661 will be masked later.
1663 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
1665 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
1667 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
1669 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
1671 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
1673 * m10300-dis.c: Only recognize instructions from the currently
1675 * m10300-opc.c: Add field indicating the particular variant of
1676 the mn10300 each instruction is available on.
1678 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
1680 * configure.in: For bfd_vax_arch, build vax-dis.lo.
1681 * Makefile.am: Rebuild dependencies.
1682 (CFILES): Add vax-dis.c.
1683 (ALL_MACHINES): Add vax-dis.lo.
1684 * aclocal.m4: Rebuild with current libtool.
1685 * configure, Makefile.in: Rebuild.
1687 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
1689 * vax-dis.c: New file, from work by Pauline Middelink
1690 <middelin@polyware.iaf.nl>.
1691 * disassemble.c (ARCH_vax): Define if ARCH_all.
1692 (disassembler): Add case for ARCH_vax.
1693 * makefile.vms: Support compilation on vms/vax.
1695 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
1697 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
1698 related to sign extension and the size of ints.
1700 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
1702 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
1703 instructions. Support (sp) addressing mode by expanding it into
1706 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
1708 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
1710 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
1712 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
1714 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
1716 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
1719 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
1721 * mips-dis.c (print_insn_little_mips): Previously, instruction
1722 printing references the symbol table to determine whether the
1723 instruction resides in a block regular instructions or mips16
1724 instructions. However, when the disassembler gets used in other
1725 environments where the symbol table is not present, we no longer
1726 rely in the symbol table, rather, use the low bit of the
1727 instructions address to guess. There should be no change for usage
1728 of the disassembler in host based programs, gdb, objdump.
1729 (print_insn_big_mips): ditto.
1730 (print_insn_mips): ditto
1732 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
1734 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
1736 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
1738 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
1740 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1742 * i386-dis.c (index16): Add '%' to register names. Use ','
1745 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1747 * i386-dis.c: Don't print opcode suffix when we can figure out the
1748 size (and gas can!) by register operands, or from the default
1750 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
1752 (dis386, dis386_twobyte, grps): Use new suffix macros.
1753 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
1754 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
1755 order of cmps operands to agree with Intel docs. Correct operand
1756 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
1757 agree with Intel docs.
1758 (print_insn_x86): Print orphan fwait before other prefixes.
1759 Return correct byte count for orphan fwait with prefixes. Don't
1760 print `bound' operands in reverse order.
1761 (ckprefix): Stop accumulating prefixes if we get fwait.
1762 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
1764 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
1766 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
1767 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
1769 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1771 Fix problems when bfd_vma is wider than long.
1772 * i386-dis.c: Make op_address and start_pc unsigned.
1773 (set_op): Make parameter unsigned.
1774 (print_insn_x86): Cast to bfd_vma when passing a value to
1776 * ns32k-dis.c (CORE_ADDR): Don't define.
1777 (print_insn_ns32k): Change type of addr to bfd_vma. Use
1778 bfd_scan_vma to read back address.
1779 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
1781 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
1782 (NEXTULONG): New definition.
1783 (print_insn_m68k): Avoid overflow when computing third argument of
1785 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
1786 Use disp instead of val to store offset values.
1787 (print_indexed): Use base_disp instead of word to store base
1788 displacement, to avoid overflow.
1789 * m10300-dis.c (disassemble): Cast value to long when computing
1790 pc-relative address, to get correct sign extension.
1792 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
1794 * m32r-opc.c: Regenerate.
1796 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
1798 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
1799 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
1801 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
1803 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
1805 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1807 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
1809 (OP_DSreg): Rename from OP_DSSI.
1810 (OP_ESreg): Rename from OP_ESDI.
1811 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
1813 (append_seg): Rename from append_prefix.
1814 (ptr_reg): New function.
1815 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
1817 (PREFIX_ADDR): Rename from PREFIX_ADR.
1818 (float_reg): Add non-broken opcodes for people who don't want
1821 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1823 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
1826 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
1828 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
1830 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
1832 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
1833 0; produce error message for shifts of size 32 (or 64 for 64-bit
1834 shifts), because the hardware doesn't support them.
1836 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
1838 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
1839 LONG_2, LONG_2b formats to use this new operand.
1841 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
1843 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
1845 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
1847 * sparc-dis.c (print_insn_sparc): big endian instruction / little
1848 endian data support.
1850 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
1852 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
1853 and SHORT_B3b formats to use Rb instead of Ra.
1855 Add FLAG_MUL16 to MUL2XH opcode.
1857 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
1858 to existing 1.1.1 parallelisation prohibition procedure.
1860 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
1862 * m32r-asm.c,m32r-dis.c: Regenerate.
1864 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
1866 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
1867 with a shift count of 0.
1869 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
1871 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
1872 (cgen_hw_lookup_by_num): New function.
1874 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
1876 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
1878 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
1880 * sparc-dis.c (print_insn_sparc): Always fetch instructions
1881 as big-endian on SPARClite.
1883 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
1885 * d30v-opc.c (pre_defined_register): Remove alias for r0.
1887 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
1889 * po/Make-in (install-info): New target.
1891 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
1893 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
1894 * configure: Rebuild.
1896 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
1898 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
1899 variety of ISA2 instructions to set bottom ten bits of trap code.
1901 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
1903 * Makefile.am (config.status): Add explicit target so that
1904 config.status depends upon bfd/configure.in.
1905 * Makefile.in: Rebuild.
1907 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1909 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
1910 instructions to set bottom ten bits of break code.
1911 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
1912 for above optional argument.
1914 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
1916 * makefile.vms: Run dec c with /nodebug.
1918 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
1920 * Makefile.in: Rebuilt.
1921 * Makefile.am: Regenerated dependencies with mkdep.
1923 * opintl.h (_): Define as dgettext.
1925 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
1927 * cgen-asm.c: Internationalised.
1928 * m32r-asm.c: Internationalised.
1929 * m32r-dis.c: Internationalised.
1930 * m32r-opc.c: Internationalised.
1932 * aclocal.m4: Regenerated.
1933 * configure: Regenerated.
1934 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1935 * Makefile.in: Rebuild.
1936 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1937 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1939 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
1941 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
1943 * aclocal.m4, configure: Rebuild with current tools.
1945 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
1947 * opintl.h: New file - contains internationalisation macros used
1948 by source files in this directory.
1949 * po/: New subdirectory - contains internationalisation files.
1950 * po/Make-in: New file - Makefile constructor.
1951 * po/POTFILES.in: New file - list of files in opcodes directory
1952 that should be scan for internationalisation macros.
1953 * po/opcodes.pot: New file - list of internationisation strings
1954 found in files mentioned in po/POTFILES.in.
1955 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
1956 entry. Add intl directory to include paths.
1957 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1958 HAVE_STRCPY, HAVE_LC_MESSAGES
1959 * configure.in: Add rule to build Makefile in po subdirectory.
1960 * Makefile.in: Rebuilt.
1961 * aclocal.m4: Rebuilt.
1962 * config.in: Rebuilt.
1963 * configure: Rebuilt.
1964 * alpha-opc.c: Internationalised.
1965 * arc-dis.c: Internationalised.
1966 * arc-opc.c: Internationalised.
1967 * arm-dis.c: Internationalised.
1968 * cgen-asm.c: Internationalised.
1969 * d30v-dis.c: Internationalised.
1970 * dis-buf.c: Internationalised.
1971 * h8300-dis.c: Internationalised.
1972 * h8500-dis.c: Internationalised.
1973 * i386-dis.c: Internationalised.
1974 * m10200-dis.c: Internationalised.
1975 * m10300-dis.c: Internationalised.
1976 * m68k-dis.c: Internationalised.
1977 * m88k-dis.c: Internationalised.
1978 * mips-dis.c: Internationalised.
1979 * ns32k-dis.c: Internationalised.
1980 * opintl.h: Internationalised.
1981 * ppc-opc.c: Internationalised.
1982 * sparc-dis.c: Internationalised.
1983 * v850-dis.c: Internationalised.
1984 * v850-opc.c: Internationalised.
1986 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1988 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1989 (asm_hash_table_entries): New variable.
1990 (cgen_asm_init): Free asm_hash_table_entries.
1991 (hash_insn_array,hash_insn_list): New functions.
1992 (build_asm_hash_table): Use them. Hash macro insns as well.
1993 (cgen_asm_lookup_insn): Update.
1994 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1995 (dis_hash_table_entries): New variable.
1996 (cgen_dis_init): Free dis_hash_table_entries.
1997 (hash_insn_array,hash_insn_list): New functions.
1998 (build_dis_hash_table): Use them. Hash macro insns as well.
1999 (cgen_dis_lookup_insn): Update.
2000 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
2001 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
2002 (cgen_macro_insn_count): New function.
2003 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
2005 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
2007 * i386-dis.c (OP_DSSI): Print segment override.
2009 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
2011 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
2014 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
2016 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
2017 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
2018 * configure.in: Define and substitute WIN32LDFLAGS and
2020 * aclocal.m4: Rebuild with new libtool.
2021 * configure, Makefile.in: Rebuild.
2023 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
2025 * m32r-opc.c: Regenerate.
2027 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
2029 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
2030 before trying to copy it.
2031 * Makefile.in: Rebuild.
2033 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
2035 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
2037 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
2039 * ns32k-dis.c (bit_extract_simple): New function to extract bits
2040 from an arbitrary valid buffer instead of fetching them on demand
2042 (invalid_float): use bit_extract_simple() instead of bit_extract().
2044 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
2046 From H.J. Lu <hjl@gnu.org>:
2047 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
2050 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
2052 * Branched binutils 2.9.
2054 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
2056 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
2057 disassembling last 4 bytes of a section.
2059 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
2061 Fix some gcc -Wall warnings:
2062 * arc-dis.c (print_insn): Add casts to avoid warnings.
2063 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
2064 * d10v-dis.c (dis_long, dis_2_short): Likewise.
2065 * m10200-dis.c (disassemble): Likewise.
2066 * m10300-dis.c (disassemble): Likewise.
2067 * ns32k-dis.c (print_insn_ns32k): Likewise.
2068 * ppc-opc.c (insert_ral, insert_ram): Likewise.
2069 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
2070 * cgen-opc.c (cgen_keyword_search_next): Likewise.
2071 * d10v-dis.c (dis_long, dis_2_short): Likewise.
2072 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
2073 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
2074 * tic80-dis.c (print_one_instruction): Likewise.
2075 * w65-dis.c (print_operand): Likewise.
2076 * z8k-dis.c (fetch_data): Likewise.
2077 * a29k-dis.c: Add return type for find_byte_func_type.
2078 * arc-opc.c: Include <stdio.h>. Remove declarations of
2079 insert_multshift and extract_multshift.
2080 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
2082 (extract_value): Fully parenthesize expression.
2083 * h8500-dis.c (print_insn_h8500): Initialize local variables.
2084 * h8500-opc.h (h8500_table): Fully bracket initializer.
2085 * w65-opc.h (optable): Likewise.
2086 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
2087 * i386-dis.c (OP_E): Initialize local variables.
2088 * m10200-dis.c (print_insn_mn10200): Likewise.
2089 * mips-dis.c (print_insn_mips16): Likewise.
2090 * sh-dis.c (print_insn_shx): Likewise.
2091 * v850-dis.c (print_insn_v850): Likewise.
2092 * ns32k-dis.c (print_insn_arg): Declare.
2093 (get_displacement, invalid_float): Declare.
2094 (list_search, sign_extend, flip_bytes): Declare return type.
2095 (get_displacement): Likewise.
2096 (print_insn_arg): Likewise. Make d int. Fix sprintf format
2098 (print_insn_ns32k): Make i unsigned.
2099 (invalid_float): Make static. Declare type of val.
2100 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
2101 on each for iteration.
2102 * tic30-dis.c (get_indirect_operand): Likewise.
2103 * z8k-dis.c (print_insn_z8001): Declare return type.
2104 (print_insn_z8002): Likewise.
2105 (unparse_instr): Fix sprintf format strings.
2107 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
2109 * mips-opc.c: Add "sync.l" and "sync.p".
2111 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2113 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
2114 default m68k variant to recognize.
2116 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
2117 (ctrl, cobr, mem, ea): Likewise.
2118 (print_addr): Likewise. Remove cast.
2119 (ea): Cast argument of print_addr to bfd_vma.
2121 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
2123 (cgen_parse_unsigned_integer): Likewise.
2124 (cgen_parse_address): Likewise.
2126 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
2128 * i960-dis.c (ctrl): Add full braces to structure initialization.
2129 (cobr, mem, reg): Likewise.
2130 (ea): Correct parenthesization in expression.
2132 * cgen-asm.c: Include <ctype.h>.
2133 (build_asm_hash_table): Remove unused local variable i.
2134 (cgen_parse_keyword): Add casts to avoid warnings.
2136 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
2137 symbol. Fix indentation.
2138 (print_insn_little_arm): Likewise.
2140 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
2142 * configure.in: Use AM_DISABLE_SHARED.
2143 * aclocal.m4, configure: Rebuild with libtool 1.2.
2145 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
2147 These patches are courtesy of Jonathan Walton and Tony Thompson
2148 (athompso@cambridge.arm.com).
2150 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
2153 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
2154 both the offset and the label closest to the destination.
2156 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
2158 * m32r-opc.h: Regenerate.
2160 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
2162 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
2164 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
2166 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
2167 assume that info->symbols is non-empty.
2169 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
2171 * alpha-opc.c (cvtqs) There is no such thing.
2172 (cvttq): Missing most of the /*d variants.
2174 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
2176 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
2177 delayed branches or jumps.
2179 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
2181 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
2183 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
2184 * tic30-dis.c (print_branch): Likewise.
2186 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
2188 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
2189 saved_symbol code as it is no longer needed.
2191 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
2193 * cgen-asm.c: Include symcat.h.
2194 * cgen-dis.c,cgen-opc.c: Ditto.
2195 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
2197 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
2199 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
2201 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
2203 * m32r-opc.[ch]: Regenerate.
2205 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
2207 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
2208 arguments. Don't perform validation here.
2209 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
2211 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
2213 * m32r-opc.c: Regenerate.
2215 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
2217 * Makefile.am (AUTOMAKE_OPTIONS): Define.
2218 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
2220 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
2222 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
2224 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
2226 * configure.in: Get the version number from BFD.
2227 * configure: Rebuild.
2229 From H.J. Lu <hjl@gnu.org>:
2230 * Makefile.am (libopcodes_la_LDFLAGS): Define.
2231 * Makefile.in: Rebuild.
2233 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
2235 * m32r-opc.c: Regenerate.
2236 * m32r-opc.h: Regenerate.
2238 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
2240 * m32r-opc.c: Regenerate.
2242 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
2244 Fix rac to accept only a0:
2245 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
2246 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
2247 Introduce OPERAND_GPR.
2248 * d10v-dis.c (print_operand): Likewise.
2250 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
2252 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
2253 (cgen_hw_lookup): Make result const.
2254 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
2256 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
2258 * configure, aclocal.m4: Rebuild with new libtool.
2260 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
2262 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
2263 instructions use a PC relative branch, not absolute.
2265 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
2267 * configure.in: Set libtool_enable_shared rather than
2268 libtool_shared. Remove diversion hack.
2269 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
2271 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
2273 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
2274 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
2276 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
2278 * tic30-dis.c: New file.
2279 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
2280 * configure.in: Handle bfd_tic30_arch.
2281 * Makefile.am: Rebuild dependencies.
2282 (CFILES): Add tic30-dis.c
2283 (ALL_MACHINES): Add tic30-dis.lo.
2284 * configure, Makefile.in: Rebuild.
2286 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
2288 * m32r-opc.h (HAVE_CPU_M32R): Define.
2290 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
2292 * v850-opc.c (insertion routines): If both alignment and size is
2293 wrong then report this.
2295 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
2297 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
2298 Only recognize instructions for the current target_processor.
2300 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
2302 * d10v-dis.c (PC_MASK): Correct value.
2303 (print_operand): If there's a reloc, don't calculate the
2304 address because they could be in different sections.
2306 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
2308 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
2309 instruction after the 4650's "mul" instruction; nobody's using the
2310 4010 these days. If object files someday indicate which processor
2311 variant they're intended for, we can do a better job at this.
2313 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
2315 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
2316 table provided entry size. Use CGEN_INSN_MNEMONIC.
2317 (cgen_parse_keyword): Rewrite.
2318 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
2319 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
2320 * cgen-opc.c: Clean up pass over `struct foo' usage.
2321 (cgen_keyword_lookup_value): Handle "" entry.
2322 (cgen_keyword_add): Likewise.
2324 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
2326 * mips-opc.c: Add FP_D to s.d instruction flags.
2328 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2330 * m68k-opc.c (halt, pulse): Enable them on the 68060.
2332 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
2334 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
2335 PC relative offset forms before the 15 bit forms. An assembler command
2336 line option now chooses the default.
2338 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
2340 * d30v-opc.c (d30v_opcode_table): Set new flags bits
2341 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
2343 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
2345 * configure: Only build libopcodes shared if --enable-shared's value
2346 was `yes', or was set to `*opcodes*'.
2347 * aclocal.m4: Likewise.
2348 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
2349 original source of this bit of code. It's not clear what the best fix
2352 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
2354 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
2355 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
2356 offset forms before the 15 bit forms, to default to the long forms.
2358 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
2360 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
2362 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
2364 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
2365 symbol if none is present.
2366 (print_insn_big_arm): Prevent examination of stored symbol if
2369 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
2371 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
2373 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
2375 * disassemble.c: Remove disasm_symaddr() function.
2377 * arm-dis.c: Use info->symbol instead of info->flags to determine
2378 if disassmbly should be in Thumb or Arm mode.
2380 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
2382 * arm-dis.c: Add support for disassembling Thumb opcodes.
2383 (print_insn_thumb): New function.
2385 * disassemble.c (disasm_symaddr): New function.
2387 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
2388 (thumb_opcodes): Table of Thumb opcodes.
2390 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2392 * m68k-opc.c (btst): Change Dd@s to Dd;b.
2394 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
2395 and 'v' as operand types.
2397 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
2399 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
2400 <olivier.carmona@di.epfl.ch>.
2401 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
2402 which has a two word opcode with a one word argument.
2404 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
2406 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
2407 unsigned, not signed.
2408 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
2410 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
2412 * d10v-dis.c (print_operand):
2413 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
2415 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
2417 * d10v-opc.c (OPERAND_FLAG): Split into:
2418 (OPERAND_FFLAG, OPERAND_CFLAG) .
2422 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
2424 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
2425 field for all INSN_MACRO's.
2426 * mips16-opc.c: same
2428 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
2430 * mips-opc.c (sync,cache): These are 3900 insns.
2432 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
2434 sh-opc.h (sh_table): Remove ftst/nan.
2436 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
2438 * mips-opc.c (ffc, ffs): Fix mask.
2440 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
2442 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
2445 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
2447 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
2448 (WR_HILO, RD_HILO, MOD_HILO): New macros.
2450 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
2452 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
2453 (WR_HILO, RD_HILO, MOD_HILO): New macros.
2455 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
2457 * v850-dis.c (disassemble): Replace // with /* ... */
2459 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
2461 * sparc-opc.c: Add wr & rd for v9a asr's.
2462 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
2463 (v9a_asr_reg_names): New variable.
2464 Patch from David Miller <davem@vger.rutgers.edu>.
2466 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
2468 * sparc-opc.c (v9notv9a): New insn type.
2469 (IMPDEP): Move to the end to not conflict with edge8 et al.
2470 Patch from David Miller <davem@vger.rutgers.edu>.
2472 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
2474 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
2476 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
2478 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
2480 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
2482 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
2483 of disassemble_info structure to determine if an overlay address
2484 has a matching symbol in low memory.
2486 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
2487 new symbol_at_address_func field in disassemble_info structure.
2489 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
2491 * v850-opc.c (extract_d22): Use signed arithmatic.
2493 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
2495 * mips-opc.c: Three op mult is not an ISA insn.
2497 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
2499 * mips-opc.c: Fix formatting.
2501 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
2503 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
2504 than assuming that char is signed. Explicitly sign extend 16 bit
2505 values, rather than assuming that short is 16 bits.
2506 (OP_sI, OP_J, OP_DIR): Likewise.
2508 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
2510 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
2513 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
2515 * v850-opc.c: Fix typo in comment.
2517 * v850-dis.c (disassemble): Add test of processor type when
2518 determining opcodes.
2520 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
2522 * configure.in: Use a diversion to set enable_shared before the
2523 arguments are parsed.
2524 * configure: Rebuild.
2526 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
2528 * m68k-opc.c (TBL1): Use ! rather than `.
2529 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
2531 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
2533 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
2535 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
2537 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
2540 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
2541 * aclocal.m4: Rebuild with new libtool.
2542 * configure: Rebuild.
2544 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
2546 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
2548 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
2550 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
2552 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
2554 * v850-opc.c (v850_opcodes): Further rearrangements.
2556 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
2558 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
2560 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
2562 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
2565 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
2567 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
2569 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
2571 * v850-opc.c: Initialise processors field of v850_opcode structure.
2573 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
2575 Merge changes from Martin Hunt:
2577 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
2579 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
2580 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
2581 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
2583 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
2585 * d30v-dis.c (print_insn): First operand of d*i (delayed
2586 branch) instructions is relative.
2588 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
2589 (d30v_operand_table): Add IMM6S3 type.
2590 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
2592 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
2593 and cmp instructions.
2595 * d30v-opc.c: Correct entries for repeat*, and sat*.
2596 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
2597 types. Correct several formats.
2599 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
2601 * d30v-opc.c (pre_defined_registers): Change control registers.
2603 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
2604 SHORT_C2. Manual was incorrect.
2606 * d30v-dis.c (lookup_opcode): Return value now indicates
2607 if an opcode has a short and a long form. Used for deciding
2608 to append a ".s" or ".l".
2609 (print_insn): Append a ".s" to an instruction if it is
2610 the short form and ".l" if it is a long form. Do not append
2611 anything if the instruction has only one possible size.
2613 * d30v-opc.c: Change mulx2h to require an even register.
2614 New form: SHORT_A2; a SHORT_A form that needs an even
2615 register as the first operand.
2617 * d30v-dis.c (print_insn_d30v): Fix problem where the last
2618 instruction was not being disassembled if there were an odd
2619 number of instructions.
2621 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
2623 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
2625 * v850-dis.c (disassemble): Improved display of register lists.
2627 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
2629 * sparc-opc.c (sparc_opcodes): Fix assembler args to
2630 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
2631 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
2632 fandnot1s, fandnot2s.
2634 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
2636 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
2638 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
2640 * cgen-asm.c (cgen_parse_address): New argument resultp.
2641 All callers updated.
2642 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
2644 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
2646 * mn10200-dis.c (disassemble): PC relative instructions are
2647 relative to the next instruction, not the current instruction.
2649 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
2651 * v850-dis.c (disassemble): Only signed extend values that are not
2652 returned by extract functions.
2653 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
2655 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
2657 * v850-opc.c: Update comments. Remove use of
2658 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
2660 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
2662 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
2664 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
2666 * configure: Rebuilt with latest devo autoconf for NT support.
2668 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
2670 * v850-dis.c (disassemble): Use curly brace syntax for register
2673 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
2674 where r0 is being used as a destination register.
2676 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
2678 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
2680 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
2682 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
2684 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
2686 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
2687 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
2690 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2692 * configure (cgen_files): Add support for v850e target.
2693 * configure.in (cgen_files): Add support for v850e target.
2695 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2697 * configure (cgen_files): Add support for v850ea target.
2698 * configure.in (cgen_files): Add support for v850ea target.
2700 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
2702 * configure.in (bfd_arc_arch): Add.
2703 * configure: Rebuild.
2704 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
2705 * Makefile.in: Rebuild.
2706 * arc-dis.c, arc-opc.c: New files.
2707 * disassemble.c (ARCH_all): Define ARCH_arc.
2708 (disassembler): Add ARC support.
2710 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
2712 * v850-dis.c (disassemble): Add support for v850EA instructions.
2714 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
2715 (v850_opcodes): Add v850EA instructions.
2717 * v850-dis.c (disassemble): Add support for v850E instructions.
2719 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
2720 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
2721 insert_spe, extract_spe): New Functions.
2722 (v850_opcodes): Add v850E instructions.
2724 * v850-opc.c: Reorganised and re-layed out to improve readability
2727 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
2729 * configure: Rebuild with autoconf 2.12.1.
2731 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
2733 * aclocal.m4, configure: Rebuild with new automake patches.
2735 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
2737 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
2738 * acinclude.m4: Just include acinclude.m4 from BFD.
2739 * aclocal.m4, configure: Rebuild.
2741 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
2743 * Makefile.am: New file, based on old Makefile.in.
2744 * acconfig.h: New file.
2745 * acinclude.m4: New file.
2746 * stamp-h.in: New file.
2747 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
2748 Removed shared library handling; now handled by libtool. Replace
2749 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
2750 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
2751 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
2752 handling in AC_OUTPUT.
2753 * dep-in.sed: Change .o to .lo.
2754 * Makefile.in: Now built with automake.
2755 * aclocal.m4: Now built with aclocal.
2756 * config.in, configure: Rebuild.
2758 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
2760 * mips-opc.c: Fix typo/thinko in "eret" instruction.
2762 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
2764 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2766 * sparc-dis.c (sorted_opcodes): New static local.
2767 (struct opcode_hash): `opcode' is pointer to const element.
2768 (build_hash): First arg is now table of sorted pointers.
2769 (print_insn_sparc): Sort opcodes by sorting table of pointers.
2770 (compare_opcodes): Update.
2772 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
2774 * cgen-opc.c: #include <ctype.h>.
2775 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2776 Handle case insensitive hashing.
2777 (hash_keyword_value): Change type of `value' to unsigned int.
2779 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2781 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2782 precision FP, mark it as such. Likewise for double precision
2783 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2786 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2788 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2790 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2791 nesting depth when all the macros are expanded.
2793 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2795 * sparc-opc.c: The fcmp v9a instructions take an integer register
2796 as a destination, not a floating point register. From Christian
2797 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2799 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2801 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2802 syntax. From Roman Hodek
2803 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2805 * i386-dis.c (twobyte_has_modrm): Fix pand.
2807 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2809 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2811 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2813 * arm-dis.c: Add prototypes for arm_decode_shift and
2816 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2818 * mips-opc.c: Add r3900 insns.
2820 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2822 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2823 print delay slot instructions on the same line. When using a PC
2824 relative load, add a comment with the value being loaded if it can
2827 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2829 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2830 to pushS/popS for segment regs and byte constant so that
2831 pushw/popw printed when in 16 bit data mode.
2833 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2834 print cbtw, cwtd in 16 bit data mode.
2835 * i386-dis.c (putop): extra case W to support above.
2837 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2838 address size prefix in 16 bit address mode.
2840 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2842 * sh-dis.c: Reindent. Rename local variable fprintf to
2845 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2847 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2849 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2851 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2853 * mips16-opc.c (mip16_opcodes): same.
2855 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2857 * m68k-opc.c (moveb): Change $d to %d.
2859 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2861 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2862 (twobyte_has_modrm): Likewise.
2864 (OP_MMX, OP_EM, OP_MS): New static functions.
2866 * i386-dis.c: Revert patch of April 4. The output now matches
2869 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2871 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2874 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2876 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2878 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2880 * Makefile.in (install): Depend upon installdirs.
2881 (installdirs): New target.
2883 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2885 From Thomas Graichen <graichen@rzpd.de>:
2886 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2887 * configure: Rebuild.
2889 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2891 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2892 Delete string{,s}.h support.
2894 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2896 * cgen-asm.c (cgen_parse_operand_fn): New global.
2897 (cgen_parse_{{,un}signed_integer,address}): Update call to
2898 cgen_parse_operand_fn.
2899 (cgen_init_parse_operand): New function.
2900 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2901 from cgen_asm_init_parse.
2902 (m32r_cgen_assemble_insn): New operand `errmsg'.
2903 Delete call to as_bad, return error message to caller.
2904 (m32r_cgen_asm_hash_keywords): #if 0 out.
2906 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2908 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2910 [case 'J']: Fix typo in register name.
2912 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2914 * configure.in: Substitute SHLIB_LIBS.
2915 * configure: Rebuild.
2916 * Makefile.in (SHLIB_LIBS): New variable.
2917 ($(SHLIB)): Use $(SHLIB_LIBS).
2919 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2921 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2923 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2925 * disassemble.c (disassembler): Handle m32r.
2927 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2929 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2930 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2931 * Makefile.in (CFILES): Add them.
2932 (ALL_MACHINES): Add them.
2933 (dependencies): Regenerate.
2934 * configure.in (cgen_files): New variable.
2935 (bfd_m32r_arch): Add entry.
2936 * configure: Regenerate.
2938 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2940 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2941 * configure: Rebuild.
2943 * Makefile.in: Rebuild dependencies.
2945 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2947 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2950 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2952 * Branched binutils 2.8.
2954 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2956 * m10200-dis.c: Rename from mn10200-dis.c.
2957 * m10200-opc.c: Rename from mn10200-opc.c.
2958 * m10300-dis.c: Rename from mn10300-dis.c
2959 * m10300-opc.c: Rename from mn10300-opc.c.
2960 * Makefile.in: Update accordingly.
2962 * mips16-opc.c: Add mul and dmul macros.
2964 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2966 * makefile.vms: Update CFLAGS, add clean target.
2968 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2970 * mips-opc.c: Add "wait". From Ralf Baechle
2971 <ralf@gnu.ai.mit.edu>.
2973 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2974 * configure, config.in: Rebuild.
2975 * sysdep.h: Include <stdlib.h> if it exists.
2976 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2978 * Makefile.in: Rebuild dependencies.
2980 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2982 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2983 Andrew Bray <andy@madhouse.demon.co.uk>.
2985 * mips-opc.c: Add cast when setting mips_opcodes.
2987 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2989 * v850-dis.c (disassemble): Fix sign extension problem.
2990 * v850-opc.c (extract_d*): Fix sign extension problems to make
2991 disassembly calculate branch offsets correctly.
2993 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2995 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2997 * mips-opc.c: Add dctr and dctw.
2999 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
3001 * d30v-dis.c (print_insn): Change the way signed constants
3004 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
3006 * Makefile.in (BFD_H): New variable.
3007 (HFILES): New variable.
3008 (CFILES): Add all C files.
3009 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
3010 Delete old dependencies, and build new ones.
3011 * dep-in.sed: New file.
3013 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
3015 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
3017 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
3019 * mn10200-opc.c: Change "trap" to "syscall".
3020 * mn10300-opc.c: Add new "syscall" instruction.
3022 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
3024 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
3025 mulul insns on the coldfire.
3027 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
3029 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
3030 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
3031 (print_insn_little_arm): Likewise.
3033 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
3035 Based on patches from H.J. Lu <hjl@lucon.org>:
3036 * i386-dis.c (fetch_data): Add prototype.
3037 * m68k-dis.c (fetch_data): Add prototype.
3038 (dummy_print_address): Add prototype. Make static.
3039 * ppc-opc.c (valid_bo): Add prototype.
3040 * sparc-dis.c (build_hash_table): Add prototype.
3041 (is_delayed_branch, compute_arch_mask): Add prototypes.
3042 (print_insn_sparc): Make several local variables const.
3043 (compare_opcodes): Change arguments to const PTR. Add prototype.
3044 * sparc-opc.c (arg): Change name field to be const.
3045 (lookup_name, lookup_value): Add prototypes. Change table and
3046 name parameters to be const.
3047 (sparc_encode_asi): Change name parameter to be const.
3048 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
3049 (sparc_encode_sparclet_cpreg): Likewise.
3050 (sparc_decode_asi): Change return type to be const.
3051 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
3052 (sparc_decode_sparclet_cpreg): Likewise.
3054 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
3056 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
3057 Solaris doesn't like the combined options, and the -f is
3059 (stamp-tshlink, install): Likewise.
3061 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
3063 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
3066 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
3068 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
3070 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
3072 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
3075 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
3077 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
3079 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
3081 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
3083 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
3085 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
3087 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3089 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
3090 floatformat_to_double to make portable.
3091 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
3094 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
3096 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
3097 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
3099 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
3101 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
3102 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
3104 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
3106 * tic80-opc.c (LSI_SCALED): Renamed from this ...
3107 (OFF_SL_BR_SCALED): ... to this, and added the flag
3108 TIC80_OPERAND_BASEREL to the flags word.
3109 (tic80_opcodes): Replace all occurances of LSI_SCALED with
3112 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
3114 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
3115 Change mips_opcodes from const array to a pointer,
3116 and change bfd_mips_num_opcodes from const int to int,
3117 so that we can increase the size of the mips opcodes table
3120 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
3122 * tic80-opc.c (tic80_predefined_symbols): Revert change to
3123 store BITNUM values in the table in one's complement form
3124 to match behavior when assembler is given a raw numeric
3125 value for a BITNUM operand.
3126 * tic80-dis.c (print_operand_bitnum): Ditto.
3128 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
3130 * d30v-opc.c: Removed references to FLAG_X.
3132 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
3134 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
3136 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
3138 * Makefile.in: Added d30v object files.
3139 * configure: (bfd_d30v_arch) Rebuilt.
3140 * configure.in: (bfd_d30v_arch) Added new case.
3141 * d30v-dis.c: New file.
3142 * d30v-opc.c: New file.
3143 * disassemble.c (disassembler) Add entry for d30v.
3145 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
3147 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
3148 representations for the floating point BITNUM values.
3150 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
3152 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
3153 in the table in one's complement form, as they appear in the
3155 (tic80_symbol_to_value): Use macros to access predefined
3157 (tic80_value_to_symbol): Ditto.
3158 (tic80_next_predefined_symbol): New function.
3159 * tic80-dis.c (print_operand_bitnum): Remove code that did
3160 one's complement for BITNUM values.
3162 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
3164 * makefile.vms: Remove 8 bit characters. Update to latest
3167 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
3169 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
3171 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
3173 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
3174 (IMM24_PCREL): Likewise.
3176 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
3178 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
3179 address for an extended PC relative instruction that is not a
3182 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3184 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
3187 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
3189 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
3190 (tic80_opcodes): Sort entries so that long immediate forms
3191 come after short immediate forms, making it easier for
3192 assembler to select the right one for a given operand.
3194 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
3196 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
3198 (print_insn_mips16): Likewise.
3200 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
3202 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
3203 a symbol class that restricts translation to just that
3204 class (general register, condition code, etc).
3206 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
3208 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
3209 and REG_DEST_E for register operands that have to be
3210 an even numbered register. Add REG_FPA for operands that
3211 are one of the floating point accumulator registers.
3212 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
3213 (tic80_opcodes): Change entries that need even numbered
3214 register operands to use the new operand table entries.
3215 Add "or" entries that are identical to "or.tt" entries.
3217 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
3219 * mips16-opc.c: Add new cases of exit instruction for
3221 * mips-dis.c (print_mips16_insn_arg): Display floating point
3222 registers in operands of exit instruction. Print `$' before
3223 register names in operands of entry and exit instructions.
3225 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
3227 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
3228 pairs for all predefined symbols recognized by the assembler.
3229 Also used by the disassembling routines.
3230 (tic80_symbol_to_value): New function.
3231 (tic80_value_to_symbol): New function.
3232 * tic80-dis.c (print_operand_control_register,
3233 print_operand_condition_code, print_operand_bitnum):
3234 Remove private tables and use tic80_value_to_symbol function.
3236 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
3238 * d10v-dis.c (print_operand): Change address printing
3239 to correctly handle PC wrapping. Fixes PR11490.
3241 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
3243 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
3246 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
3248 * mips-dis.c (print_insn_mips16): Set insn_info information.
3249 (print_mips16_insn_arg): Likewise.
3251 * mips-dis.c (print_insn_mips16): Better handling of an extend
3252 opcode followed by an instruction which can not be extended.
3254 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
3256 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
3257 coldfire moveb instruction to not allow an address register as
3258 destination. Although the documentation does not indicate that
3259 this is invalid, experiments uncovered unexpected behavior.
3260 Added a comment explaining the situation. Thanks to Andreas
3261 Schwab for pointing this out to me.
3263 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
3265 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
3266 entries are presorted so that entries with the same mnemonic are
3267 adjacent to each other in the table. Sort the entries for each
3268 instruction so that this is true.
3270 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3272 * m68k-dis.c: Include <libiberty.h>.
3273 (print_insn_m68k): Sort the opcode table on the most significant
3274 nibble of the opcode.
3276 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
3278 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
3279 "vsub", "vst", "xnor", and "xor" instructions.
3280 (V_a1): Renamed from V_a, msb of accumulator reg number.
3281 (V_a0): Add macro, lsb of accumulator reg number.
3283 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
3285 * tic80-dis.c (print_insn_tic80): Broke excessively long
3286 function up into several smaller ones and arranged for
3287 the instruction printing function to be callable recursively
3288 to print vector instructions that have both a load and a
3289 math instruction packed into a single opcode.
3290 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
3291 to explain why it comes after the other vector opcodes.
3293 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
3295 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
3296 move insns to handle immediate operands.
3298 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3300 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
3301 fix operand mask in the "moveml" entries for the coldfire.
3303 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
3305 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
3306 New macros for building vector instruction opcodes.
3307 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
3308 FMT_LI, which were unused. The field is now a flags field.
3309 Remove some opcodes that are possible, but illegal, such
3310 as long immediate instructions with doubles for immediate
3311 values. Add "vadd" and "vld" instructions.
3313 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
3315 * tic80-opc.c (tic80_operands): Reorder some table entries to make
3316 the order more logical. Move the shift alias instructions ("rotl",
3317 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
3318 interspersed with the regular sr.x and sl.x instructions. Add
3319 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
3320 "sub", "subu", "swcr", and "trap".
3322 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
3324 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
3325 (OFF_SL_PC): Renamed from OFF_SL.
3326 (OFF_SS_BR): New operand type for base relative operand.
3327 (OFF_SL_BR): New operand type for base relative operand.
3328 (REG_BASE): New operand type for base register operand.
3329 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
3330 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
3331 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
3333 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
3334 10 char field, padded with spaces on rhs, rather than a string
3335 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
3336 than old TIC80_OPERAND_RELATIVE. Add support for new
3337 TIC80_OPERAND_BASEREL flag bit.
3339 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
3341 * tic80-dis.c (print_insn_tic80): Print floating point operands
3343 * tic80-opc.c (SPFI): Add single precision floating point
3344 immediate operand type.
3345 (ROTATE): Add rotate operand type for shifts.
3346 (ENDMASK): Add for shifts.
3347 (n): Macro for the 'n' bit.
3348 (i): Macro for the 'i' bit.
3349 (PD): Macro for the 'PD' field.
3350 (P2): Macro for the 'P2' field.
3351 (P1): Macro for the 'P1' field.
3352 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
3355 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
3357 * mn10200-dis.c (disassemble): Mask off unwanted bits after
3358 adding in current address for pc-relative operands.
3360 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
3362 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
3363 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
3364 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
3365 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
3366 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
3367 REG_BASE_M_SI, REG_BASE_M_LI respectively.
3368 (REG_SCALED, LSI_SCALED): New operand types.
3369 (E): New macro for 'E' bit at bit 27.
3370 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
3371 opcodes, including the various size flavors (b,h,w,d) for
3372 the direct load and store instructions.
3374 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
3376 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
3378 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
3379 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
3380 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
3381 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
3382 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
3383 masks with "MASK_* & ~M_*" to get the M bit reset.
3384 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
3386 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
3388 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
3389 correctly. Add support for printing TIC80_OPERAND_BITNUM and
3390 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
3392 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
3393 CC, SICR, and LICR table entries.
3394 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
3395 "bcnd", and "brcr" opcodes.
3397 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
3399 * ppc-opc.c (powerpc_operands): Make comment match the
3400 actual fields (no shift field).
3401 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
3402 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
3403 partial implementation, work in progress.
3404 * tic80-opc.c (tic80_operands): Begin construction operands table.
3405 (tic80_opcodes): Continue populating opcodes table and start
3406 filling in the operand indices.
3407 (tic80_num_opcodes): Add this.
3409 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
3411 * m68k-opc.c: Add #B case for moveq.
3413 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
3415 * mn10300-dis.c (disassemble): Make sure all variables are initialized
3416 before they are used.
3418 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
3420 * v850-opc.c (v850_opcodes): Put curly-braces around operands
3421 for "breakpoint" instruction.
3423 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
3425 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
3426 (dep): Use ALL_CFLAGS rather than CFLAGS.
3428 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3430 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
3433 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
3435 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
3436 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
3438 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
3440 * mips16-opc.c: Add "abs".
3442 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
3444 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
3445 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
3446 (disassembler): Add bfd_arch_tic80 support to set disassemble
3447 to print_insn_tic80.
3448 * tic80-dis.c (print_insn_tic80): Add stub.
3450 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
3452 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
3453 * configure: Regenerate with autoconf.
3454 * tic80-dis.c: Add file.
3455 * tic80-opc.c: Add file.
3457 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3459 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
3461 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
3463 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
3464 (mn10200_opcodes): Use it for some logicals and btst insns.
3465 Add "break" and "trap" instructions.
3467 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
3469 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
3471 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
3473 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
3474 relative load or add now depends upon whether the instruction is
3477 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
3479 * mn10200-dis.c: Finish writing disassembler.
3480 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
3481 Fix mask for "jmp (an)".
3483 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
3484 handle endianness issues for mn10300.
3486 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
3488 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
3490 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
3491 instruction. Fix opcode field for "movb (imm24),dn".
3493 * mn10200-opc.c (mn10200_operands): Fix insertion position
3496 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
3498 * mn10200-opc.c: Create mn10200 opcode table.
3499 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
3500 but moving along nicely.
3502 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3504 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
3506 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
3508 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
3509 specifiers for fmovem* instructions.
3511 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
3513 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
3515 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
3517 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
3520 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
3522 * mn10300-opc.c: Add some comments explaining the various
3525 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
3527 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3529 * m68k-dis.c (print_insn_arg): Handle new < and > operand
3532 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3533 operand specifiers in fmovm* instructions.
3535 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
3537 * ppc-opc.c (insert_li): Give an error if the offset has the two
3538 least significant bits set.
3540 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
3542 * mips-dis.c (print_insn_mips16): Separate the instruction from
3543 the arguments with a tab, not a space.
3545 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
3547 * mn10300-dis.c (disasemble): Finish conversion to '$' as
3550 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
3553 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
3555 * configure: Rebuild with autoconf 2.12.
3557 Add support for mips16 (16 bit MIPS implementation):
3558 * mips16-opc.c: New file.
3559 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
3560 (mips16_reg_names): New static array.
3561 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
3562 after seeing a 16 bit symbol.
3563 (print_insn_little_mips): Likewise.
3564 (print_insn_mips16): New static function.
3565 (print_mips16_insn_arg): New static function.
3566 * mips-opc.c: Add jalx instruction.
3567 * Makefile.in (mips16-opc.o): New target.
3568 * configure.in: Use mips16-opc.o for bfd_mips_arch.
3569 * configure: Rebuild.
3571 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
3573 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3574 operand specifiers in *save, *restore and movem* instructions.
3576 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
3579 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
3580 register operands for immediate arithmetic, not, neg, negx, and
3581 set according to condition instructions.
3583 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
3584 specifier of the effective-address operand in immediate forms of
3585 arithmetic instructions. The specifier for the immediate operand
3586 notes how and where the constant will be stored.
3588 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
3590 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
3593 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
3596 * mn10300-dis.c (disassemble): Prefix registers with '%'.
3598 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
3600 * mn10300-dis.c (disassemble): Handle register lists.
3602 * mn10300-opc.c: Fix handling of register list operand for
3603 "call", "ret", and "rets" instructions.
3605 * mn10300-dis.c (disassemble): Print PC-relative and memory
3606 addresses symbolically if possible.
3607 * mn10300-opc.c: Distinguish between absolute memory addresses,
3608 pc-relative offsets & random immediates.
3610 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
3612 (disassemble): Handle SPLIT and EXTENDED operands.
3614 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
3616 * mn10300-dis.c: Rough cut at printing some operands.
3618 * mn10300-dis.c: Start working on disassembler support.
3619 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
3621 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
3623 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
3625 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3627 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
3629 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
3631 * mn10300-opc.c (mn10300_opcodes): Demand parens around
3632 register argument is calls and jmp instructions.
3634 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
3636 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
3637 getx operand. Fix opcode for mulqu imm,dn.
3639 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
3641 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
3642 in MN10300_OPERAND_SPLIT operands for how many bits
3643 appear in the basic insn word. Add IMM32_HIGH24,
3644 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
3645 (mn10300_opcodes): Use new operands as needed.
3647 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
3648 for bset, bclr, btst instructions.
3649 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
3651 * mn10300-opc.c (mn10300_operands): Remove many redundant
3652 operands. Update opcode table as appropriate.
3653 (IMM32): Add MN10300_OPERAND_SPLIT flag.
3654 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
3656 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
3658 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
3659 operands (for indexed load/stores). Fix bitpos for DI
3660 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
3661 few instructions that insert immediates/displacements in the
3662 middle of the instruction. Add IMM8E for 8 bit immediate in
3663 the extended part of an instruction.
3664 (mn10300_operands): Use new opcodes as appropriate.
3666 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3668 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
3669 sequential so the assembler never parallelizes it with
3672 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
3674 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
3675 a data/address register that appears in register field 0
3676 and register field 1.
3677 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
3679 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
3681 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
3682 standard disassembly.
3684 * alpha-opc.c (alpha_operands): Rearrange flags slot.
3685 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
3686 Recategorize PALcode instructions.
3688 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
3690 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
3692 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
3694 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
3695 there are no operand types.
3697 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
3699 * v850-opc.c (D9_RELAX): Renamed from D9, all references
3701 (v850_operands): Make sure D22 immediately follows D9_RELAX.
3703 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
3705 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
3707 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
3709 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
3710 and sst.w instructions.
3712 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
3715 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
3717 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
3720 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
3722 * ppc-opc.c (PPCPWR2): Define.
3723 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
3726 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
3728 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
3729 field for movhu instruction.
3731 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
3732 cast value to "long" not "signed long" to keep hpux10
3735 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
3737 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3740 * mn10300-opc.c (FMT*): Remove definitions.
3742 * mn10300-opc.c (mn10300_opcodes): Fix destination register
3743 for shift-by-register opcodes.
3745 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3746 into [AD][MN][01] for encoding the position of the register
3749 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
3751 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3752 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3754 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
3756 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3757 Fix various typos. Add "PAREN" operand.
3758 (MEM, MEM2): Define.
3759 (mn10300_opcodes): Surround all memory addresses with "PAREN"
3760 operands. Fix several typos.
3762 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3765 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
3767 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3768 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3770 (mn10300_opcodes): Break opcode format out into its own field.
3771 Update many operand fields to deal with signed vs unsigned
3772 issues. Fix one or two typos in the "mov" instruction
3773 opcode, mask and/or operand fields.
3775 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3777 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3778 m68851 wasn't reset.
3780 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3782 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3783 all opcodes. Very rough cut at operands for all opcodes.
3785 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3788 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3790 * mn10200-opc.c, mn10300-opc.c: New files.
3791 * mn10200-dis.c, mn10300-dis.c: New files.
3792 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3793 * disassemble.c: Break mn10x00 support into 10200 and 10300
3795 * configure.in: Likewise.
3796 * configure: Rebuilt.
3798 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3800 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3802 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3804 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3806 * disassemble (ARCH_mn10x00): Define.
3807 (disassembler): Handle bfd_arch_mn10x00.
3808 * configure.in: Recognize bfd_mn10x00_arch.
3809 * configure: Rebuilt.
3811 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3813 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3814 accordingly. Don't declare functions using op_rtn.
3816 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3818 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3819 params to be more standard.
3820 * (disassemble): Print absolute addresses and symbolic names for
3821 branch and jump targets.
3822 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3824 * (v850_opcodes): Add breakpoint insn.
3826 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3828 * m68k-opc.c: Move the fmovemx data register cases before the
3829 other cases, so that they get recognized before the data register
3830 does gets treated as a degenerate register list.
3832 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3834 * mips-opc.c: Add a case for "div" and "divu" with two registers
3835 and a destination of $0.
3837 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3839 * mips-dis.c (print_insn_arg): Add prototype.
3840 (_print_insn_mips): Ditto.
3842 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3844 * mips-dis.c (print_insn_arg): Print condition code registers as
3847 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3849 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3851 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3853 * v850-dis.c (disassemble): Make static. Provide prototype.
3855 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3857 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3860 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3862 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3863 ']' characters into the output stream.
3864 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3865 Add "memop" field to all opcodes (for the disassembler).
3866 Reorder opcodes so that "nop" comes before "mov" and "jr"
3867 comes before "jarl".
3869 * v850-dis.c (print_insn_v850): Fix typo in last change.
3871 * v850-dis.c (print_insn_v850): Properly handle disassembling
3872 a two byte insn at the end of a memory region when the memory
3873 region's size is only two byte aligned.
3875 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3877 * v850-dis.c (v850_reg_names): Define.
3878 (v850_sreg_names, v850_cc_names): Likewise.
3879 (disassemble): Very rough cut at printing operands (unformatted).
3881 * v850-opc.c (BOP_MASK): Fix.
3882 (v850_opcodes): Fix mask for jarl and jr.
3884 * v850-dis.c: New file. Skeleton for disassembler support.
3885 * Makefile.in Remove v850 references, they're not needed here.
3886 * configure.in: Add v850-dis.o when building v850 toolchains.
3887 * configure: Rebuilt.
3888 * disassemble.c (disassembler): Call v850 disassembler.
3890 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3891 (insert_d8_6, extract_d8_6): New functions.
3892 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3893 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3895 (IF4A, IF4B): Use "D7" instead of "D7S".
3896 (IF4C, IF4D): Use "D8_7" instead of "D8".
3897 (IF4E, IF4F): New. Use "D8_6".
3898 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3899 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3901 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3902 (v850_operands): Change D16 to D16_15, use special insert/extract
3903 routines. New new D16 that uses the generic insert/extract code.
3904 (IF7A, IF7B): Use D16_15.
3905 (IF7C, IF7D): New. Use D16.
3906 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3908 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3909 message. Issue an error if the branch offset is odd.
3911 * v850-opc.c: Add notes about needing special insert/extract
3912 for all the load/store insns, except "ld.b" and "st.b".
3914 * v850-opc.c (insert_d22, extract_d22): New functions.
3915 (v850_operands): Use insert_d22 and extract_d22 for
3917 (insert_d9): Fix range check.
3919 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3921 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3922 and set bits field to D9 and D22 operands.
3924 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3926 * v850-opc.c (v850_operands): Define SR2 operand.
3927 (v850_opcodes): "ldsr" uses R1,SR2.
3929 * v850-opc.c (v850_opcodes): Fix opcode specs for
3930 sld.w, sst.b, sst.h, sst.w, and nop.
3932 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3934 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3935 end of the opcode table.
3937 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3939 * d10v-opc.c (pre_defined_registers): Added register pairs,
3940 "r0-r1", "r2-r3", etc.
3942 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3944 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3945 Create I16U for an unsigned 16bit mmediate operand.
3946 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3948 * v850-opc.c (v850_operands): Define EP operand.
3949 (IF4A, IF4B, IF4C, IF4D): Use EP.
3951 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3952 with immediate operand, "movhi". Tweak "ldsr".
3954 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3955 correct. Get sld.[bhw] and sst.[bhw] closer.
3957 * v850-opc.c (v850_operands): "not" is a two byte insn
3959 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3961 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3963 * v850-opc.c (two): Get order of words correct.
3965 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3967 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3968 register source and destination operands.
3969 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3971 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3972 same thinko in "trap" opcode.
3974 * v850-opc.c (v850_opcodes): Add initializer for size field
3977 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3978 Add D8 for 8-bit unsigned field in short load/store insns.
3979 (IF4A, IF4D): These both need two registers.
3980 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3981 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3982 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3983 for "ldsr" and "stsr".
3984 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3987 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3988 short store word (sst.w).
3990 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3992 * v850-opc.c (v850_operands): Added insert and extract fields,
3993 pointers to functions that handle unusual operand encodings.
3995 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3997 * v850-opc.c (v850_opcodes): Enable "trap".
3999 * v850-opc.c (v850_opcodes): Fix order of displacement
4000 and register for "set1", "clr1", "not1", and "tst1".
4002 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
4004 * v850-opc.c (v850_operands): Add "B3" support.
4005 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
4008 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
4010 * v850-opc.c: Close unterminated comment.
4012 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
4014 * v850-opc.c (v850_operands): Add flags field.
4015 (v850_opcodes): add move opcodes.
4017 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
4019 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
4020 * configure: (bfd_v850v_arch) Add new case.
4021 * configure.in: (bfd_v850_arch) Add new case.
4022 * v850-opc.c: New file.
4024 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
4026 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
4028 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
4030 * d10v-opc.c: Add additional information to the opcode
4031 table to help determinine which instructions can be done
4034 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
4036 * mpw-make.sed: Update editing of include pathnames to be
4039 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
4041 * arm-opc.h: Added "bx" instruction definition.
4043 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
4045 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
4047 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
4049 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
4051 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
4053 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
4055 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
4057 * makefile.vms: Update for alpha-opc changes.
4059 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
4061 * i386-dis.c (print_insn_i386): Actually return the correct value.
4062 (ONE, OP_ONE): #ifdef out; not used.
4064 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
4066 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
4067 Changed subi operand type to treat 0 as 16.
4069 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
4071 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
4074 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
4076 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
4077 memory transfer instructions. Add new format string entries %h and %s.
4078 * arm-dis.c: (print_insn_arm): Provide decoding of the new
4081 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
4083 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
4084 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
4086 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
4088 * alpha-dis.c (print_insn_alpha_osf): Remove.
4089 (print_insn_alpha_vms): Remove.
4090 (print_insn_alpha): Make globally visible. Chose the register
4091 names based on info->flavour.
4092 * disassemble.c: Always return print_insn_alpha for the alpha.
4094 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
4096 * d10v-dis.c (dis_long): Handle unknown opcodes.
4098 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
4100 * d10v-opc.c: Changes to support signed and unsigned numbers.
4101 All instructions with the same name that have long and short forms
4102 now end in ".l" or ".s". Divs added.
4103 * d10v-dis.c: Changes to support signed and unsigned numbers.
4105 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
4107 * d10v-dis.c: Change all functions to use info->print_address_func.
4109 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
4111 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
4112 move ccr/sr insns more strict so that the disassembler only
4113 selects them when the addressing mode is data register.
4115 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
4116 * d10v-opc.c (pre_defined_registers): Declare.
4117 * d10v-dis.c (print_operand): Now uses pre_defined_registers
4118 to pick a better name for the registers.
4120 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
4122 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
4123 operands for fexpand and fpmerge. From Christian Kuehnke
4124 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
4126 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
4128 * alpha-dis.c (print_insn_alpha): No longer the user-visible
4129 print routine. Take new regnames and cpumask arguments.
4130 Kill the environment variable nonsense.
4131 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
4132 (print_insn_alpha_vms): New function. Do VMS style regnames.
4133 * disassemble.c (disassembler): Test bfd flavour to pick
4134 between OSF and VMS routines. Default to OSF.
4136 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
4138 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
4139 * configure: Rebuild.
4140 * Makefile.in (install): Use @INSTALL_SHLIB@.
4142 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
4144 * configure: (bfd_d10v_arch) Add new case.
4145 * configure.in: (bfd_d10v_arch) Add new case.
4146 * d10v-dis.c: New file.
4147 * d10v-opc.c: New file.
4148 * disassemble.c (disassembler) Add entry for d10v.
4150 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
4152 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
4153 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
4155 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
4157 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
4158 distinguish between variants of the instruction set.
4159 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
4160 distinguish between variants of the instruction set.
4162 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
4164 * i386-dis.c (print_insn_i8086): New routine to disassemble using
4165 the 8086 instruction set.
4166 * i386-dis.c: General cleanups. Make most things static. Add
4167 prototypes. Get rid of static variables aflags and dflags. Pass
4168 them as args (to almost everything).
4170 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
4172 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
4174 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
4176 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
4177 if the next arg is marked with SRC_IN_DST. Gross.
4179 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
4180 we're looking for and find EXR.
4182 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
4183 if we're looking for KBIT and we don't find it.
4185 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
4188 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
4189 3bit immediate operands.
4191 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
4193 * Released binutils 2.7.
4195 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
4196 <kkaempf@progis.ac-net.de>.
4198 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
4200 * alpha-opc.c: Correct second case of "mov" to use OPRL.
4202 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
4204 * sparc-dis.c (print_insn_sparclite): New routine to print
4205 sparclite instructions.
4207 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
4209 * m68k-opc.c (m68k_opcodes): Add coldfire support.
4211 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
4213 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
4214 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
4215 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
4217 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
4219 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
4220 Use autoconf-set values.
4221 (docdir, oldincludedir): Removed.
4222 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
4224 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
4226 * alpha-opc.c: New file.
4227 * alpha-opc.h: Remove.
4228 * alpha-dis.c: Complete rewrite to use new opcode table.
4229 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
4230 * configure: Rebuild with autoconf 2.10.
4231 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
4232 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
4234 (alpha-opc.o): New target.
4236 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
4238 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
4239 Set imm_added_to_rs1 even if the source and destination register
4242 * sparc-opc.c: Add some two operand forms of the wr instruction.
4244 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
4246 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
4249 * disassemble.c (disassembler): Handle H8/S.
4250 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
4252 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
4254 * sparc-opc.c: Add beq/teq as aliases for be/te.
4256 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
4257 <sergei@msil.sps.mot.com>.
4259 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
4261 * makefile.vms: New file.
4263 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
4265 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
4267 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
4270 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
4272 * i386-dis.c (OP_OFF): Call append_prefix.
4274 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
4276 * ppc-opc.c (instruction encoding macros): Add explicit casts to
4277 unsigned long to silence a warning from the Solaris PowerPC
4280 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
4282 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
4284 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
4286 * sparc-dis.c (X_IMM,X_SIMM): New macros.
4288 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
4289 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
4290 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
4291 cpush, cpusha, cpull sparclet insns.
4293 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
4295 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
4297 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
4299 * sparc-opc.c: Set F_FBR on floating point branch instructions.
4300 Set F_FLOAT on other floating point instructions.
4302 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
4304 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
4306 (powerpc_opcodes): Add 860/821 specific SPRs.
4308 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
4310 * configure.in: Permit --enable-shared to specify a list of
4311 directories. Set and substitute BFD_PICLIST.
4312 * configure: Rebuild.
4313 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
4314 uses. Set to @BFD_PICLIST@.
4316 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
4318 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
4319 not "abs", which may be needed for the absolute in something
4320 like btst #0,@10:8. Print L_3 immediates separately from other
4321 immediates. Change ABSMOV reference to ABS8MEM.
4323 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
4325 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
4326 (current_arch_mask): New static global.
4327 (compute_arch_mask): New static function.
4328 (print_insn_sparc): Delete sparc_v9_p. New static local
4329 current_mach. Resort opcode table if current_mach changes.
4330 Generalize "insn not supported" test.
4331 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
4332 Delete test for v9/!v9.
4333 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
4335 (brfc): Split into CBR and FBR for coprocessor/fp branches.
4336 (brfcx): Renamed to FBRX.
4337 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
4338 coprocessor mnemonics are not supported on the sparclet).
4339 (condf): Renamed to CONDF.
4340 (SLCBCC2): Delete F_ALIAS flag.
4342 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
4344 * sparc-opc.c (sparc_opcodes): rd must be 0 for
4345 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
4347 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
4349 * Makefile.in (config.status): Depend upon BFD VERSION file, so
4350 that the shared library version number is set correctly.
4352 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
4354 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
4355 Miles Bader <miles@gnu.ai.mit.edu>.
4356 * configure: Rebuild.
4358 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
4360 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
4363 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
4365 * configure: Rebuild with autoconf 2.8.
4367 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
4369 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
4370 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
4372 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
4374 * configure.in: Don't set SHLIB or SHLINK to an empty string,
4375 since they appear as targets in Makefile.in.
4376 * configure: Rebuild.
4378 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
4380 * mpw-make.sed: Edit out shared library support bits.
4382 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
4384 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
4385 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
4386 (sparc_opcodes): Add sparclet insns.
4387 (sparclet_cpreg_table): New static local.
4388 (sparc_{encode,decode}_sparclet_cpreg): New functions.
4389 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
4391 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
4393 * i386-dis.c (index16): New static variable.
4394 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
4396 (OP_indirE): Return result of OP_E.
4397 (OP_E): Check for 16 bit addressing mode, and disassemble
4398 correctly. Optimised 32 bit case a little. Don't print
4399 "(base,index,scale)" when sib specifies only an offset.
4401 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
4403 * configure.in: Set and substitute SHLIB_DEP.
4404 * configure: Rebuild.
4405 * Makefile.in (SHLIB_DEP): New variable.
4406 (LIBIBERTY_LISTS, BFD_LIST): New variables.
4407 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
4408 COMMON_SHLIB, add them to piclist with appropriate modifications.
4409 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
4410 here: just use piclist.
4412 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
4414 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
4415 (print_insn_sparc): Rewrite v9/not-v9 tests.
4416 (compare_opcodes): Likewise.
4417 * sparc-opc.c (MASK_<ARCH>): Define.
4418 (v6,v7,v8,sparclite,v9,v9a): Redefine.
4419 (sparclet,v6notv9): Define.
4420 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
4421 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
4423 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
4425 * configure.in: Call AC_PROG_CC before configure.host.
4426 * configure: Rebuild.
4428 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
4430 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
4432 * i386-dis.c (onebyte_has_modrm): New static array.
4433 (twobyte_has_modrm): New static array.
4434 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
4436 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
4438 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
4441 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
4443 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
4446 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
4448 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
4449 m68010up, not just m68020up | cpu32.
4451 * Makefile.in (SONAME): New variable.
4452 ($(SHLINK)): Make a link to the transformed name, as well.
4453 (stamp-tshlink): New target.
4454 (install): Skip stamp-tshlink during install.
4456 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
4458 * configure.in: Call AC_ARG_PROGRAM.
4459 * configure: Rebuild.
4460 * Makefile.in (program_transform_name): New variable.
4461 (install): Transform library name before installing it.
4463 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
4465 * i960-dis.c (mem): Add HX dcinva instruction.
4467 Support for building as a shared library, based on patches from
4468 Alan Modra <alan@spri.levels.unisa.edu.au>:
4469 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
4470 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
4471 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
4472 * configure: Rebuild.
4473 * Makefile.in (ALLLIBS): New variable.
4474 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
4475 (COMMON_SHLIB, SHLINK): New variables.
4476 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
4477 (STAGESTUFF): Remove variable.
4478 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
4479 (stamp-piclist, piclist): New targets.
4480 ($(SHLIB), $(SHLINK)): New targets.
4481 ($(OFILES)): Depend upon stamp-picdir.
4482 (disassemble.o): Build twice if PICFLAG is set.
4483 (MOSTLYCLEAN): Add pic/*.o.
4484 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
4485 (distclean): Remove pic and stamp-picdir.
4486 (install): Install shared libraries.
4487 (stamp-picdir): New target.
4489 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
4491 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
4492 Print unknown instruction as "unknown", rather than in hex.
4494 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
4496 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
4498 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
4500 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
4502 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
4504 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
4505 when necessary. From Ulrich Drepper
4506 <drepper@myware.rz.uni-karlsruhe.de>.
4508 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
4510 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
4511 sparc_num_opcodes. Update architecture enum values.
4512 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
4513 (sparc_opcode_lookup_arch): New function.
4514 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
4515 (sparc_opcodes): Add v9a shutdown insn.
4517 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
4519 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
4520 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
4522 (print_insn_sparc64): Deleted.
4523 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
4526 * sparc-opc.c (architecture_pname): Add v9a.
4528 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
4530 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
4531 incorrectly defined as 0x16 when it should be 0x15.
4532 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
4533 (alpha_insn_set): added cvtst and cvttq float ops. Also added
4534 excb (exception barrier) which is defined in the Alpha
4535 Architecture Handbook version 2.
4536 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
4537 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
4538 disassembled as or, for example.
4540 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
4542 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
4543 (_print_insn_mips): Change i from int to unsigned int.
4545 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
4547 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
4548 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
4550 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
4552 * i386-dis.c: Added Pentium Pro instructions.
4554 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4556 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
4559 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4561 * sh-opc.h (sh_nibble_type): Added REG_B.
4562 (sh_arg_type): Added A_REG_B.
4563 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
4565 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
4567 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
4569 * disassemble.c (disassembler): Use new bfd_big_endian macro.
4571 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
4573 * Makefile.in (distclean): Remove stamp-h. From Ronald
4574 F. Guilmette <rfg@monkeys.com>.
4576 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
4578 From David Mosberger-Tang <davidm@azstarnet.com>:
4579 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
4582 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4584 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
4585 (sh_table): Added many SH3 opcodes.
4586 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
4588 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4590 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
4591 (subco,subco.): Mark this PPC, not PPCCOM.
4593 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
4595 * configure: Rebuild with autoconf 2.7.
4597 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
4599 * configure: Rebuild with autoconf 2.6.
4601 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
4603 * configure.in: Sort list of architectures. Accept but do nothing
4604 for alliant, convex, pyramid, romp, and tahoe.
4606 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
4608 * a29k-dis.c (print_special): Change num to unsigned int.
4610 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
4612 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
4615 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
4617 * configure.in: Call AC_CHECK_PROG to find and cache AR.
4618 * configure: Rebuilt.
4620 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
4622 * configure.in: Add case for bfd_i860_arch.
4623 * configure: Rebuild.
4625 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
4627 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
4628 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
4629 (NEXTDOUBLE): Likewise.
4630 (print_insn_m68k): Don't match fmoveml if there is more than one
4631 register in the list.
4632 (print_insn_arg): Handle a place of '8' for a type of 'L'.
4634 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
4636 * m68k-opc.c: Use #W rather than #w.
4637 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
4639 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
4641 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
4642 and likewise for all the dbxx opcodes.
4644 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
4646 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
4648 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
4650 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
4651 the VR4100 specific instructions to the mips_opcodes structure.
4653 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
4655 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
4656 ugly Metrowerks bug in CW6, is fixed in CW7.
4658 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4660 * ppc-opc.c (whole file): Add flags for common/any support.
4662 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
4664 * Makefile.in (BISON): Remove macro.
4665 (FLAGS_TO_PASS): Remove BISON.
4667 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
4669 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
4671 * m68k-dis.c (print_insn_m68k): Recognize all two-word
4672 instructions that take no args by looking at the match mask.
4673 (print_insn_arg): Always print "%" before register names.
4674 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
4675 [case '_']: Don't print "@#" before address.
4676 [case 'J']: Use "%s" as format string, not register name.
4677 [case 'B']: Treat place == 'C' like 'l' and 'L'.
4679 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
4681 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
4684 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
4686 From David Mosberger-Tang <davidm@azstarnet.com>
4688 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
4689 (alpha_insn_set): added definitions for VAX floating point
4690 instructions (Unix compilers don't generate these, but handcoded
4691 assembly might still use them).
4693 * alpha-dis.c (print_insn_alpha): added support for disassembling
4694 the miscellaneous instructions in the Alpha instruction set.
4696 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
4698 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
4699 no longer create sysdep.h, sed ppc-opc.c to work around a
4700 serious Metrowerks C bug.
4701 * mpw-make.in: Remove.
4702 * mpw-make.sed: New file, used by mpw-configure to edit
4703 Makefile.in into an MPW makefile.
4705 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
4707 * Makefile.in (maintainer-clean): New synonym for realclean.
4709 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
4711 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
4712 which use '0', '1', and '2' instead. Specify the proper size for
4713 a pmove immediate operand. Correct the pmovefd patterns to be
4714 moves to a register, not from a register.
4715 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
4717 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
4719 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
4720 %psr, %wim, %tbr as F_NOTV9.
4722 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
4724 * Makefile.in (Makefile): Just rebuild Makefile when running
4726 (config.h, stamp-h): New targets.
4727 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
4728 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
4729 rebuilding config.h.
4730 * configure: Rebuild.
4732 * mips-opc.c: Change unaligned loads and stores with "t,A"
4733 operands to use "t,A(b)".
4735 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4737 * sh-dis.c (print_insn_shx): Add F_FR0 support.
4739 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4741 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4742 until 3 instead of until 2.
4744 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
4746 * Makefile.in (ALL_CFLAGS): Define.
4747 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4748 (MOSTLYCLEAN): Add config.log.
4749 (distclean): Don't remove config.log.
4750 * configure.in: Substitute HDEFINES.
4751 * configure: Rebuild.
4753 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4755 * sh-opc.h (sh_arg_type): Add F_FR0.
4756 (sh_table, case fmac): Add F_FR0 as first argument.
4758 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4760 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4762 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
4764 * sparc-dis.c: Remove all references to NO_V9.
4766 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4768 * aclocal.m4: Just include ../bfd/aclocal.m4.
4769 * configure: Rebuild.
4771 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4773 * sparc-dis.c (X_DISP19): Define.
4774 (print_insn, case 'G'): Use it.
4775 (print_insn, case 'L'): Sign extend displacement.
4777 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4779 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4780 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4781 host_makefile_frag or frags.
4782 * aclocal.m4: New file.
4783 * configure: Rebuild.
4784 * Makefile.in (INSTALL): Set to @INSTALL@.
4785 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4786 (INSTALL_DATA): Set to @INSTALL_DATA@.
4788 (AR_FLAGS): Set to rc rather than qc.
4789 (CC): Define as @CC@.
4790 (CFLAGS): Set to @CFLAGS@.
4791 (@host_makefile_frag@): Remove.
4792 (config.status): Remove dependency upon @frags@.
4794 * configure.in: ../bfd/config.bfd now just sets shell variables.
4795 Use them rather than looking through target Makefile fragments.
4796 * configure: Rebuild.
4798 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4800 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4802 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4804 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4805 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4808 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4809 (lookup_{name,value}): New functions.
4810 (prefetch_table): New static local.
4811 (sparc_{encode,decode}_prefetch): New functions.
4812 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4814 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4816 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4819 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4821 * sh-dis.c: Correct comment on first line of file.
4823 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4825 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4827 * sparc-opc.c (asi, membar): New static locals.
4828 (sparc_{encode,decode}_{asi,membar}): New functions.
4829 (sparc_opcodes, membar insn): Fix.
4830 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4831 Support decoding of membar masks.
4834 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4836 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4838 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4840 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4841 and likewise for the other branches. Add bhs as an alias for bcc,
4842 and likewise for the size variants. Add dbhs as an alias for
4845 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4847 * sh-opc.h (FP sts instructions): Update to match reality.
4849 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4851 * m68k-dis.c: (fpcr_names): Add % before all register names.
4852 (reg_names): Likewise.
4853 (print_insn_arg): Don't explicitly print % before register names.
4854 Add % before register names in static array names. In case 'r',
4855 print data registers as `@(Dn)', not `Dn@'. When printing a
4856 memory address, don't print @# before it.
4857 (print_indexed): Change base_disp and outer_disp from int to
4858 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4859 syntax. Sign extend 8 byte displacement correctly.
4860 (print_base): Print using MIT syntax. Print zpc when appropriate.
4861 Change parameter disp from int to bfd_vma.
4863 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4866 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4868 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4869 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4870 * sh-opc.h (sh_arg_type): Add new operand types.
4871 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4873 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4875 * Makefile.in (distclean): Remove generated file config.h.
4877 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4879 * Makefile.in (distclean): Remove generated file config.h.
4881 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4883 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4885 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4887 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4888 rather than numopcodes. Use m68k_opcodes rather than removed
4889 opcode function. Don't check F_ALIAS.
4890 (print_insn_arg): Change first parameter to be const char *.
4891 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4892 (m68k-opc.o): New target.
4893 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4894 * configure: Rebuild.
4896 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4898 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4899 (opcode_bits, opcode_hash_table): New variables.
4900 (opcodes_initialized): Renamed from opcodes_sorted.
4901 (build_hash_table): New function.
4902 (is_delayed_branch): Use hash table.
4903 (print_insn): Renamed from print_insn_sparc, made static.
4904 Build and use hash table. If !sparc64, ignore sparc64 insns,
4905 and vice-versa if sparc64.
4906 (print_insn_sparc, print_insn_sparc64): New functions.
4907 (compare_opcodes): Move sparc64 opcodes to end.
4908 Print commutative insns with constant second.
4909 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4911 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4913 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4914 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4915 avoids printing a delay slot in a delay slot.
4916 * sh-opc.h (sh_table): Fully bracket last entry.
4918 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4920 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4922 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4924 * configure.in: Get host_makefile_frag from ${srcdir}.
4926 * configure.in: Autoconfiscated. Check for string[s].h. Create
4927 config.h from config.in. Don't set up sysdep.h link.
4928 * sysdep.h: New file.
4929 * configure, config.in: New files, generated from configure.in.
4930 * Makefile.in: Updated to be processed autoconf-style.
4931 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4932 (Makefile): Depend on config.status.
4933 (config.status): New rule.
4934 * configure.bat: Update Makefile substitutions.
4936 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4938 * mips-opc.c (L1): Define.
4939 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4940 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4943 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4945 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4946 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4947 have multiple add units but only a single logical unit.
4949 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4950 shifted by 18, without any insertion or extraction function.
4951 (insert_cr, extract_cr): Remove.
4953 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4955 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4958 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4960 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4961 * sh-opc.h: Add copyright.
4963 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4965 * Makefile.in (crunch-m68k): Delete extra target accidentally
4966 checked in a while ago.
4968 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4970 * sh-opc.h (sh_table): Add SH3 support.
4972 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4974 * sh-opc.h: Added bsrf and braf.
4976 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4978 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4979 bogus [ls]fm{ea,fd} patterns.
4981 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4982 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4983 initialize it from memory. Make function static.
4984 (print_insn_{big,little}_arm): New functions.
4985 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4986 the correct endianness.
4988 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4990 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4993 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4995 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4996 17th, so that it builds again using GCC as the compiler.
4998 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
5000 * mips-dis.c (print_insn_little_mips): Cast return value from
5001 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
5002 expects an unsigned long, and that might be fewer words of
5003 argument storage (e.g., if bfd_vma is long long on a 32-bit
5005 (print_insn_big_mips): Likewise with bfd_getb32 value.
5006 (_print_insn_mips): Now static.
5008 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
5010 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
5011 gcc memory hog problem with initializer is fixed.
5013 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
5015 Merge in support for Mac MPW as a host.
5016 (Old change descriptions retained for informational value.)
5018 * mpw-config.in (archname): Compute from the config.
5019 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
5021 * mpw-config.in (target_arch): Compute from canonical target.
5022 (m68k, mips, powerpc, sparc): Add architectures.
5023 * mpw-make.in (disassemble.c.o): Add.
5024 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
5026 * mpw-config.in (BFD_MACHINES): Set to a default value.
5027 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
5029 * mpw-make.in (CSEARCH): Add extra-include to search path.
5031 * mpw-config.in (varargs.h): Don't create.
5032 (sysdep.h): Create using forward-include.
5033 * mpw-make.in (CSEARCH): Add include/mpw to search path.
5035 * mpw-config.in: New file, MPW version of configure.in.
5036 * mpw-make.in: New file, MPW version of Makefile.in.
5038 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
5040 * alpha-dis.c (print_insn_alpha): Put empty statement after
5043 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
5045 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
5046 (low_sign_extend): Likewise.
5047 (get_field): Delete unused function.
5048 (set_field, deposit_14, deposit_21): Likewise.
5050 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
5052 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
5055 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
5057 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
5059 * alpha-opc.h (OSF_ASMCODE): define
5060 print pal-code names as defined in App C of the
5061 Alpha Architecture Reference Manual
5063 * alpha-dis.c: cleaned up output
5064 print stylized code forms as defined in App A.4.3 of the
5065 Alpha Architecture Reference Manual
5067 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
5069 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
5071 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
5074 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
5076 * m68k-dis.c (opcode): New function. Returns address of opcode
5077 table entry given index, even if the opcode table was split to
5078 work around gcc bugs.
5079 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
5081 (BREAK_UP_BIG_DECL): Make secondary array static and const.
5082 (reg_names): Now const.
5083 (print_insn_arg): Arrays cacheFieldName and names now const.
5084 (print_indexed): Array scales now const.
5086 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
5088 * ppc-opc.c: Sort recently added instructions by minor opcode
5089 number within major opcode number.
5091 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
5093 * hppa-dis.c: Include libhppa.h.
5095 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
5097 * mips-opc.c: Change dli to use M_DLI, and add dla.
5099 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5101 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
5103 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
5105 * mips-opc.c: Add r4650 mul instruction.
5107 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
5109 * mips-opc.c: Add uld and usd macros for unaligned double load and
5112 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
5114 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
5115 mfdcr, mtdcr, icbt, iccci.
5117 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
5119 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
5120 signed char fields to shorts, more portable.
5122 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
5124 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
5125 char fields as signed chars, since they may have negative values.
5127 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
5129 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
5130 (mycroft@netbsd.org).
5132 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
5134 From "Logg, Ed" <elogg@ea.com>:
5135 * ppc-opc.c (extract_bdm): Correct parenthezisation.
5136 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
5139 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
5141 * ppc-opc.c: Changes based on patch from David Edelsohn
5142 <edelsohn@mhpcc.edu>.
5143 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
5146 (insert_tbr): New static function.
5147 (extract_tbr): New static function.
5148 (XFXFXM_MASK, XFXM): Define.
5149 (XSPRBAT_MASK, XSPRG_MASK): Define.
5150 (powerpc_opcodes): Add instructions to access special registers by
5151 name. Add mtcr and mftbu.
5153 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
5155 * mips-opc.c (P3): Define.
5156 (mips_opcodes): Add mad and madu.
5158 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
5160 * configure.in: Add W65 support.
5161 * disassemble.c: Likewise.
5162 * w65-opc.h, w65-dis.c: New files.
5164 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
5166 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
5169 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
5171 * mips-opc.c: Add dli as a synonym for li.
5173 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
5175 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
5176 print something for reserved opcode values, even if it won't
5179 * mips-dis.c (_print_insn_mips): When initializing, shift right
5180 and mask, to avoid sign extension problems on the Alpha.
5182 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
5185 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
5187 * sh-opc.h (mov.l gbr): Get direction right.
5188 * sh-dis.c (print_insn_shx): New function.
5189 (print_insn_shl, print_insn_sh): Call print_insn_shx to
5190 print opcodes with right byte order.
5192 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
5194 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
5195 to avoid conflicts with getopt.
5197 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
5199 * hppa-dis.c (print_insn_hppa): Read the instruction using
5200 bfd_getb32, so that it works on a little endian or 64 bit host.
5201 Remove unused local variable op.
5203 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
5205 * mips-opc.c: Use or instead of addu for pseudo-op move, since
5206 addu does not work correctly if -mips3.
5208 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
5210 * a29k-dis.c (print_special): Add special register names defined
5211 on 29030, 29040 and 29050.
5212 (print_insn): Handle new operand type 'I'.
5214 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
5216 * Makefile.in (INSTALL): Use top level install.sh script.
5218 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
5220 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
5221 that it works on a little endian host.
5223 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
5225 * configure.in: Use ${config_shell} when running config.bfd.
5227 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
5229 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
5231 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
5233 * a29k-dis.c (print_insn): Print the opcode.
5235 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
5237 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
5239 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
5241 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
5243 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
5245 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
5246 which store a value into memory.
5248 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
5250 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
5251 * arm-dis.c, arm-opc.h: New files.
5253 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
5255 * Makefile.in (ns32k-dis.o): Add dependency.
5256 * ns32k-dis.c (print_insn_arg): Declare initialized local as
5257 string, not as array of chars.
5259 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
5261 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
5263 * sparc-opc.c: Added sparclite extended FP operations, and
5264 versions of v9 impdep* instructions permitting specification of
5267 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
5269 * i960-dis.c (reg_names): Now const.
5270 (struct sparse_tabent): New type, copied from array type in mem
5272 (ctrl): Local static array ctrl_tab now const.
5273 (cobr): Local static array cobr_tab now const.
5274 (mem): Local variables reg1, reg2, reg3 now point to const. Local
5275 static variable mem_tab no longer explicitly initialized. Changed
5276 mem_init to const array of struct sparse_tabent.
5277 (reg): Local static variable reg_tab no longer explicitly
5278 initialized. Changed reg_init to const array of struct
5280 (ea): Local static array scale_tab now const.
5282 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
5285 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
5287 * configure.bat: the disassember needs to be enabled for
5288 "objdump -d" to work in djgpp.
5290 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
5292 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
5293 (invalid_float): Enabled general version, doesn't require running
5294 on ns32k host. Changed to take char* argument, and test for
5295 explicitly specified sizes, instead of using sizeof() on host CPU
5297 (INVALID_FLOAT): Cast first argument.
5298 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
5299 list_P032, list_M032): Now const.
5300 (optlist, list_search): Made appropriate arguments now point to
5302 (print_insn_arg): Changed static array of one-character-string
5303 pointers into a static const array of characters; fixed sprintf
5304 statement accordingly.
5306 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
5308 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
5309 from distribution. A ns32k-dis.c from a previous distribution has
5310 been brought up to date and supports the new interface.
5312 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
5314 * configure.in: add bfd_ns32k_arch target support.
5316 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
5317 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
5319 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
5321 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
5324 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
5326 * h8300-dis.c, mips-dis.c: Don't use true and false.
5328 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
5330 * configure.in: Change --with-targets to --enable-targets.
5332 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
5334 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
5335 opcodes to the first instruction with that opcode, to speed
5336 disassembly of large files. From ralphc@pyramid.com (Ralph
5339 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5341 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
5343 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
5345 * configure.bat: update to latest makefile.in
5347 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
5349 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
5350 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
5351 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
5352 slot insn is in a delay slot.
5353 * z8k-opc.h: (resflg): Fix patterns.
5354 * h8500-opc.h Fix CR insn patterns.
5356 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5358 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
5359 "cmpl" before POWER versions, so that gas -many uses them.
5361 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
5363 * disassemble.c: New file.
5364 * Makefile.in (OFILES): Add disassemble.o.
5365 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
5366 * configure.in: Define ARCHDEFS in Makefile. Code taken from
5367 binutils/configure.in.
5369 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
5370 opcode being examined.
5372 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5374 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
5375 (insert_ral, insert_ram, insert_ras): New functions.
5376 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
5377 RAS for store with update.
5379 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5381 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
5382 (edelsohn@npac.syr.edu).
5384 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5386 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
5389 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
5391 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
5393 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5395 * ppc-opc.c (powerpc_operands): The signedp field has been
5396 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
5397 instead. Add new operand SISIGNOPT.
5398 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
5399 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
5400 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
5403 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5405 * i386-dis.c (struct private): Renamed to dis_private. `private'
5406 is a reserved word for dynix cc.
5408 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5410 * configure.in: Change error message to refer to bfd/config.bfd
5411 rather than bfd/configure.in.
5413 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
5415 * ppc-opc.c: Define POWER2 as short alias flag.
5416 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
5419 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5421 * i960-dis.c (print_insn_i960): Don't read a second word for
5422 opcodes 0, 1, 2 and 3.
5424 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5426 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
5428 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5430 * m68881-ext.c: Removed; no longer used.
5431 * Makefile.in: Changed accordingly.
5433 * m68k-dis.c (ext_format_68881): Don't declare.
5434 (print_insn_m68k): If an instruction uses place 'i', it uses at
5435 least four fixed bytes.
5436 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
5437 extended float, convert to double using floatformat_to_double, not
5438 ieee_extended_to_double, and fetch the data before converting it.
5440 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5442 * mips-opc.c: It's sqrt.s, not sqrt.w. From
5443 davidj@ICSI.Berkeley.EDU (David Johnson).
5445 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5447 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
5448 PowerPC uses bdnz[l][a].
5450 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5452 * dis-buf.c, i386-dis.c: Include sysdep.h.
5454 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5456 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
5458 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
5459 by Motorola PowerPC 601 with PPC_OPCODE_601.
5460 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
5461 Disassemble Motorola PowerPC 601 instructions as well as normal
5462 PowerPC instructions.
5464 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
5466 * i960-dis.c (reg, mem): Just use a static array instead of
5469 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
5471 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
5472 condition name index if this is for a negated condition.
5474 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
5475 Floating point format for 'H' operand is backwards from normal
5476 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
5477 operands (fmpyadd and fmpysub), handle bizarre register
5478 translation correctly for single precision format.
5480 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
5481 or 'I' operands if the next format specifier is 'M' (fcmp
5482 condition completer).
5484 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5486 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
5487 single number giving a bitmask for the MB and ME fields of an M
5488 form instruction. Change NB to accept 32, and turn it into 0;
5489 also turn 0 into 32 when disassembling. Seperated SH from NB.
5490 (insert_mbe, extract_mbe): New functions.
5491 (insert_nb, extract_nb): New functions.
5492 (SC_MASK): Mask out SA and LK bits.
5493 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
5494 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
5495 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
5496 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
5497 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
5498 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
5499 (powerpc_macros): Define table of macro definitions.
5500 (powerpc_num_macros): Define.
5502 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
5503 if PPC_OPERAND_NEXT is set.
5505 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5507 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
5508 char. Retrieve contents using bfd_getl32 instead of shifting.
5510 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5512 * ppc-opc.c: New file. Opcode table for PowerPC, including
5513 opcodes for POWER (RS/6000).
5514 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
5515 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
5516 (CFILES): Add ppc-dis.c.
5517 (ppc-dis.o, ppc-opc.o): New targets.
5518 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
5520 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
5522 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
5523 No space before 'u', 'f', or 'N'.
5525 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
5527 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
5528 farther than we should.
5530 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
5532 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
5534 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
5536 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
5538 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
5539 needs it, to prevent reading past the end of a section.
5541 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5543 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
5544 Removed t,A case for la; always use t,A(b) case.
5546 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5548 From Ted Lemen <mellon@pepper.ncd.com>
5549 * mips-dis.c (print_insn_arg): Handle 'k'.
5550 * mips-opc.c: Make cache use k, not t.
5552 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5554 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
5555 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
5556 FLOAT_FORMAT_CODE to put out floating point register names.
5558 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5560 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
5562 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5564 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
5566 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5568 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
5569 larger than 32. Moved dsxx32 variants first for disassembler.
5571 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5573 * z8kgen.c, z8k-opc.h: Add full lda information.
5575 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
5577 * hppa-dis.c (print_insn_hppa): Do not emit a space after
5578 movb instructions. Any necessary space will be emitted by
5579 the code to handle nullification completers.
5581 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5583 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
5585 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5587 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
5588 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
5590 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5592 * mips-opc.c: Correct lwu opcode value (book had it wrong).
5594 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5596 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
5597 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
5599 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
5601 * m88k-dis.c (m88kdis): comment change. Remove space after
5603 (printop): handle new arg types DEC and XREG for m88110.
5605 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
5607 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
5608 type for absolute branch addresses. Delete special
5609 "ble" and "be" code in 'W' operand code.
5611 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5613 * mips-opc.c: Set hazard information correctly for branch
5614 likely instructions.
5616 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5618 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
5619 info->fprintf_func for printing and info->print_address_func for
5622 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5624 * mips-opc.c: Set INSN_TRAP for tXX instructions.
5626 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5628 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
5629 Corrected second case of "b" for disassembler.
5631 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5633 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
5634 to BFD swapping routines to correspond to BFD name changes.
5636 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5638 * mips-opc.c: Change div machine instruction to be z,s,t rather
5639 than s,t. Change div macro to be d,v,t rather than d,s,t.
5640 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
5641 rem and remu which generates only the corresponding div
5642 instruction. This is for compatibility with the MIPS assembler,
5643 which only generates the simple machine instruction when an
5644 explicit destination of $0 is used.
5645 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
5647 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5649 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
5650 WR_31 hazard for bal, bgezal, bltzal.
5652 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5654 * hppa-dis.c (print_insn_hppa): Use print function
5655 from within the disassemble_info, not fprintf_filtered.
5657 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5659 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
5660 Law, law@cs.utah.edu.)
5662 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5664 * mips-opc.c ("absu"): Removed.
5667 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5669 * mips-opc.c: Added r6000 and r4000 instructions and macros.
5670 Changed hazard information to distinguish between memory load
5671 delays and coprocessor load delays.
5673 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5675 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
5677 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5679 * configure.in: Don't pass cpu to config.bfd.
5681 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5683 * m88k-dis.c (m88kdis): Make class unsigned.
5685 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
5687 * alpha-dis.c (print_insn_alpha): One branch format case was
5688 missing the instruction name.
5690 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5692 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
5693 Add the arch-specific auxiliary files.
5694 (OFILES): Remove the arch-specific auxiliary files
5695 and use BFD_MACHINES instead of DIS_LIBS.
5696 * configure.in: Set BFD_MACHINES based on --with-targets option.
5698 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5700 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
5703 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5705 * sparc-opc.c: Change CONST to const to deal with gcc
5706 -Dconst=__const -traditional.
5708 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5710 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
5711 coprocessor instructions out of #if 0, and made them use new
5714 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5716 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
5718 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
5720 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
5721 instruction, for use by the disassembler.
5723 * sparc-dis.c (SEX): Add sign extension macro. Replace many
5724 hand-coded sign extensions that depended on 32-bit host ints.
5725 FIXME, we still depend on big-endian host bitfield ordering.
5726 (sparc_print_insn): Set the insn_info_valid field, and the
5727 other fields that describe the instruction being printed.
5729 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
5731 * sparc-opc.c (call): Accept all 6 addressing modes valid for
5732 `jmp' instead of just one of them.
5734 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5736 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
5737 (fput_fp_reg_r): Renamed from fput_reg_r.
5738 (fput_fp_reg): New function.
5739 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5741 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5743 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5745 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5747 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5749 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5750 don't output a space.
5752 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5754 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
5756 * mips-opc.c: New file, containing opcode table from
5757 ../include/opcode/mips.h.
5758 * Makefile.in: Add it.
5760 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5762 * m88k-dis.c: New file, moved in from gdb and changed to use the
5763 new dis-asm.h disassembler interface.
5764 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5765 (m88k-dis.o): New target.
5767 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5769 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5770 argument string const char * to correspond to opcode/mips.h.
5772 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5774 * mips-dis.c: Updated to account for name changes in new version
5776 * Makefile.in: Added header file dependencies.
5778 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5780 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5782 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5784 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5785 extend, rather than shifts.
5787 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5789 * Makefile.in: Undo 15 June change.
5791 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5793 * m68k-dis.c (print_insn_arg): Change return value to byte count
5795 * m68k-dis.c: Re-write to detect invalid operands before
5796 printing anything, so we can handle this the same way we
5797 handle invalid opcodes.
5799 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5801 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5803 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5805 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5808 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5810 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5812 * configure.in: Do make sysdep.h link.
5813 * Makefile.in: Search ../include. Don't search ../bfd.
5815 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5817 Changes from Jeff Law, law@cs.utah.edu:
5818 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5819 Do not print a space before the completers specified by
5822 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5824 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5825 defined, since gdb has been fixed.
5827 Changes from Jeff Law, law@cs.utah.edu:
5828 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5829 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5830 be a *disassemble_info, not a *FILE.
5831 * hppa-dis.c: Support 'd', '!', and 'a'.
5832 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5833 * hppa-dis.c: Delete cases which are no longer needed.
5835 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5837 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5839 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5841 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5844 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5846 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5847 * configure.in: No longer need to configure to get sysdep.h.
5849 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5851 * Patches from Jeffrey Law <law@cs.utah.edu>.
5852 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5853 templates for 1.1 FP computational instructions.
5855 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5857 * h8500-dis.c (print_insn_h8500): Address argument is type
5859 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5862 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5863 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5865 * sparc-dis.c (compare_opcodes): Move static declaration to
5868 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5870 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5871 instruction, remove unimp hack from 'l' argument.
5873 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5875 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5878 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5880 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5881 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5884 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5886 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5887 arrays of string pointers to 2-d arrays of chars, to save
5890 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5892 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5893 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5895 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5897 * hppa-dis.c: New file from Utah, adapted to new disassembler
5899 * Makefile.in: Include it.
5901 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5903 * sh-dis.c, sh-opc.h: New files.
5905 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5907 * alpha-dis.c, alpha-opc.h: New files.
5909 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5911 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5914 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5916 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5918 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5920 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5923 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5925 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5926 and double percent signs a few places.
5928 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5930 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5931 Use info->print_address_func not print_address.
5933 * dis-buf.c (generic_print_address): New function.
5935 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5937 * Makefile.in: Add sparc-dis.c.
5938 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5940 Add `add' instruction to the set that get checked
5941 for a preceding `sethi' in order to print an absolute address.
5942 * (print_insn): Disassembly prefers real instructions.
5943 (is_delayed_branch): Speed up.
5944 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5945 Still missing some float ops, and needs testing.
5946 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5947 F_ALIAS. Use printf, not fprintf, when not passing a file
5949 (compare_opcodes): Check that identical instructions have
5950 identical opcodes, complain otherwise.
5953 * Include reg_names.
5955 Use dis-asm.h/read_memory_func interface.
5957 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5959 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5960 deliberately return non-zero to setjmp from longjmp. Otherwise
5961 this code fails to compile.
5963 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5965 * m68k-dis.c: Fix prototype for fetch_arg().
5967 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5969 * dis-buf.c: New file, for new read_memory_func interface.
5970 Makefile.in (OFILES): Include it.
5971 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5972 Use new read_memory_func interface.
5974 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5976 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5977 * h8500-opc.h: Fix couple of opcodes.
5979 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5981 * Makefile.in: add dvi & installcheck targets
5983 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5985 * Makefile.in: Update for h8500-dis.c.
5987 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5989 * h8500-dis.c, h8500-opc.h: New files
5991 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5993 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5994 ../include/dis-asm.h.
5995 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5996 and ../gdb/m68k-pinsn.c).
5997 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5998 and ../gdb/i386-pinsn.c).
5999 * m68881-ext.c: New file. Moved definition of
6000 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
6001 * Makefile.in: Adjust for new files.
6002 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
6003 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
6004 can be dis-assembled.
6006 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
6008 * mips-dis.c (print_insn_arg): Now returns void.
6010 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
6012 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
6013 files that use the macros.
6015 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
6017 * mips-dis.c: New file, from gdb/mips-pinsn.c.
6018 * Makefile.in (DIS_LIBS): Added mips-dis.o.
6019 (CFILES): Added mips-dis.c.
6021 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
6023 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
6024 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
6026 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
6028 * Makefile.in: Improve *clean rules.
6029 * configure.in: Allow a default host.
6031 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
6033 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
6034 files include other sysdep files
6036 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
6038 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
6040 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
6042 * configure.in: For host support, use ../bfd/configure.host
6043 so it stays in sync with the ../bfd/hosts database.
6045 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
6047 * configure.in: use cpu-vendor-os triple instead of nested cases
6049 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
6051 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
6052 *always* the wrong one.
6054 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
6056 * z8kgen.c: added copyright info
6058 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
6060 * z8k-dis.c (unparse_instr): prettier tabs
6061 * z8kgen.c -> z8k-opc.h: bug fixes in tables
6063 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
6065 * configure.in: Add ncr* configuration.
6066 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
6067 picayune ANSI compilers happy.
6069 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
6071 * configure.in (i386): Make i386 and i486 synonymous for now.
6072 * configure.in (i[34]86-*-sysv4): Add my_host definition.
6074 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
6076 * Makefile.in (install): Fix typo.
6078 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
6080 * Makefile.in (make): Remove obsolete crud.
6081 (sparc-opc.o): Avoid Sun Make VPATH bug.
6083 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
6085 * Makefile.in: since there are no SUBDIRS, remove rule and
6086 references of subdir_do.
6088 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
6090 * Makefile.in (install): Get the library name right here too.
6091 Don't install bfd.h, since it's unrelated to this library. No
6092 subdirs to recurse into, either.
6093 (CFILES): The source file has a .c suffix, not .o.
6095 * sparc-opc.c: New file, moved from BFD.
6096 * Makefile.in (OFILES): Build it.
6098 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
6100 * z8k-dis.c: fixed forward refferences of some declarations.
6102 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
6104 * Makefile.in: get the name of the library right
6106 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
6108 * z8k-dis.c: knows how to disassemble z8k stuff
6109 * z8k-opc.h: new file full of z8000 opcodes
6113 version-control: never