1 Thu Oct 7 00:12:43 MDT 1999 Diego Novillo <dnovillo@cygnus.com>
3 * d10v-opc.c (d10v_operands): Add RESTRICTED_NUM3 flag for
4 rac/rachi instructions.
5 (d10v_opcodes): Added seven new instructions ld, ld2w, sac, sachi,
8 1999-10-04 Doug Evans <devans@casey.cygnus.com>
10 * fr30-asm.c,fr30-desc.h: Rebuild.
11 * m32r-asm.c,m32r-desc.c,m32r-desc.h: Rebuild. Add m32rx support.
12 * m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h,m32r-opinst.c: Ditto.
14 1999-09-29 Nick Clifton <nickc@cygnus.com>
16 * sh-opc.h: Fix bit patterns for several load and store
19 Thu Sep 23 08:27:20 1999 Jerry Quinn <jerry.quinn.adv91@alum.dartmouth.org
21 * hppa-dis.c (print_insn_hppa): Replace 'B', 'M', 'g' and 'l' with
22 cleaner code using completer prefixes. Add 'Y'.
24 Sun Sep 19 10:41:27 1999 Jeffrey A Law (law@cygnus.com)
26 * hppa-dis.c: (print_insn_hppa): Correct 'cJ', 'cc'.
28 * hppa-dis.c (extract_22): New function.
30 * hppa-dis.c (print_insn_hppa): Handle 'J', 'K', and 'cc'.
32 * hppa-dis.c (print_insn_hppa): Handle 'fe' and 'cJ'.
34 * hppa-dis.c (print_insn_hppa): Handle '#', 'd', and 'cq'.
36 * hppa-dis.c (print_insn_hppa): Handle 'm', 'h', '='.
38 * hppa-dis.c (print_insn_hppa): Handle 'X' operand.
40 * hppa-dis.c (print_insn_hppa): Handle 'B' operand.
42 * hppa-dis.c (print_insn_hppa): Handle 'M' and 'L' operands.
44 * hppa-dis.c (print_insn_hppa): Handle 'l' operand.
46 * hppa-dis.c (print_insn_hppa): Handle 'g' operand.
48 Sat Sep 18 11:36:12 1999 Jeffrey A Law (law@cygnus.com)
50 * hppa-dis.c (print_insn_hppa): Output a space after 'X' completer.
52 * hppa-dis.c: (print_insn_hppa): Do output a space before a 'v'
55 * hppa-dis.c: (print_insn_hppa): Handle 'fX'.
57 * hppa-dis.c: (print_insn_hppa): Add missing break after
60 * hppa-dis.c: Finish constifying various completers, register
63 1999-09-14 Michael Meissner <meissner@cygnus.com>
65 * configure.in (Canonicalization of target names): Remove adding
66 ${CONFIG_SHELL} in front of $ac_config_sub, since autoconfig 2.14
67 generates $ac_config_sub with a ${CONFIG_SHELL} already.
68 * configure: Regenerate.
70 Tue Sep 7 13:50:32 1999 Jeffrey A Law (law@cygnus.com)
72 * hppa-dis.c (print_insn_hppa): Escape '%' in output strings.
74 * hppa-dis.c (print_insn_hppa): Handle 'Z' argument.
76 1999-09-07 Nick Clifton <nickc@cygnus.com>
78 * sh-opc.h: Add mulu.w and muls.w patterns. These are the correct
79 names for the mulu and muls patterns.
81 1999-09-04 Steve Chamberlain <sac@pobox.com>
85 * disassemble.c (disassembler): Handle bfd_arch_pj.
86 * configure.in: Handle bfd_pj_arch.
87 * Makefile.am: Rebuild dependencies.
88 (CFILES): Add pj-dis.c and pj-opc.c.
89 (ALL_MACHINES): Add pj-dis.lo and pj-opc.lo.
90 * configure, Makefile.in: Rebuild.
92 1999-09-04 H.J. Lu <hjl@gnu.org>
94 * i386-dis.c (print_insn_i386): Set bytes_per_line to 7.
96 Mon Aug 30 18:56:14 1999 Richard Henderson <rth@cygnus.com>
98 * alpha-opc.c (fetch, fetch_m, ecb, wh64): RA must be R31.
100 1999-08-04 Doug Evans <devans@casey.cygnus.com>
102 * fr30-asm.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
103 * m32r-asm.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
104 * m32r-opinst.c: Rebuild.
106 Sat Aug 28 00:27:24 1999 Jerry Quinn <jquinn@nortelnetworks.com>
108 * hppa-dis.c (print_insn_hppa): Replace 'f' by 'v'. Prefix float
109 register args by 'f'.
111 * hppa-dis.c (print_insn_hppa): Add args q, %, !, and |.
113 * hppa-dis.c (MASK_10, read_write_names, add_compl_names,
114 extract_10U_store): New.
115 (print_insn_hppa): Add new completers.
117 * hppa-dis.c (signed_unsigned_names,mix_half_names,
118 saturation_names): New.
119 (print_insn_hppa): Add completer codes 'a', 'ch', 'cH', 'cS', and 'c*'.
121 * hppa-dis.c (print_insn_hppa): Place completers behind prefix 'c'.
123 * hppa-dis.c (print_insn_hppa): Add cases for '.', '~'. '$'. and '!'
125 * hppa-dis.c (print_insn_hppa): Look at next arg instead of bits
126 to decide to print a space.
128 1999-08-21 Alan Modra <alan@spri.levels.unisa.edu.au>
130 * i386-dis.c: Add AMD athlon instruction support.
132 1999-08-10 Ian Lance Taylor <ian@zembu.com>
134 From Wally Iimura <iimura@microunity.com>:
135 * dis-buf.c (buffer_read_memory): Rewrite expression to avoid
136 overflow at end of address space.
137 (generic_print_address): Use sprintf_vma.
139 1999-08-08 Ian Lance Taylor <ian@zembu.com>
141 * Makefile.am: Rename .dep* files to DEP*. Change DEP variable to
142 MKDEP. Rebuild dependencies.
143 * Makefile.in: Rebuild.
145 Fri Aug 6 09:46:35 1999 Jerry Quinn <jquinn@nortelnetworks.com>
147 * hppa-dis.c (compare_cond_64_names, cmpib_cond_64_names,
148 add_cond_64_names, wide_add_cond_names, logical_cond_64_names,
149 unit_cond_64_names, shift_cond_64_names, bb_cond_64_names): New.
150 (print_insn_hppa): Add 64 bit condition completers.
152 Thu Aug 5 16:59:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
154 * hppa-dis.c (print_insn_hppa): Change condition args to use
157 Wed Jul 28 04:33:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
159 * hppa-dis.c (print_insn_hppa): Remove unnecessary test in 'E'
162 1999-07-21 Ian Lance Taylor <ian@zembu.com>
165 * configure.bat: Remove; obsolete.
167 1999-07-11 Ian Lance Taylor <ian@zembu.com>
169 * dis-buf.c: Add ATTRIBUTE_UNUSED as appropriate.
170 (generic_strcat_address): Add cast to avoid warning.
171 * i386-dis.c: Initialize all structure fields to avoid warnings.
172 Add ATTRIBUTE_UNUSED as appropriate.
174 1999-07-08 Jakub Jelinek <jj@ultra.linux.cz>
176 * sparc-dis.c (print_insn_sparc): Differentiate between
177 addition and oring when guessing symbol for comment.
179 1999-07-05 Nick Clifton <nickc@cygnus.com>
181 * arm-dis.c (print_insn_arm): Display hex equivalent of rotated
184 1999-06-23 Alan Modra <alan@spri.levels.unisa.edu.au>
186 * i386-dis.c: Mention intel mode specials in macro char comment.
188 1999-06-21 Ian Lance Taylor <ian@zembu.com>
190 * alpha-dis.c: Don't include <stdlib.h>.
191 * arm-dis.c: Include "sysdep.h".
192 * tic30-dis.c: Don't include <stdlib.h> or <string.h>. Include
194 * Makefile.am: Rebuild dependencies.
195 * Makefile.in: Rebuild.
197 1999-06-16 Nick Clifton <nickc@cygnus.com>
199 * arm-dis.c (print_insn_arm): Add detection of IMB and IMBRange
202 1999-06-14 Nick Clifton <nickc@cygnus.com> & Drew Mosley <dmoseley@cygnus.com>
204 * arm-dis.c (arm_regnames): Turn into a pointer to a register
206 (arm_regnames_standard): New variable: Array of ARM register
207 names according to ARM instruction set nomenclature.
208 (arm_regnames_apcs): New variable: Array of ARM register names
209 according to ARM Procedure Call Standard.
210 (arm_regnames_raw): New variable: Array of ARM register names
211 using just 'r' and the register number.
212 (arm_toggle_regnames): New function: Toggle the chosen register set
214 (parse_disassembler_options): New function: Parse any target
215 disassembler command line options.
216 (print_insn_big_arm): Call parse_disassembler_options if any
218 (print_insn_little_arm): Call parse_disassembler_options if any
221 1999-06-13 Ian Lance Taylor <ian@zembu.com>
223 * i386-dis.c (FWAIT_OPCODE): Define.
224 (used_prefixes): New static variable.
225 (fetch_data): Don't print an error message if we have already
226 fetched some bytes successfully.
227 (ckprefix): Clear used_prefixes. Use FWAIT_OPCODE, not 0x9b.
228 (prefix_name): New static function.
229 (print_insn_i386): If setjmp fails, indicating a data error, but
230 we have managed to fetch some bytes, print the first one as a
231 prefix or a .byte pseudo-op. If fwait is followed by a non
232 floating point instruction, print the first prefix. Set
233 used_prefixes when prefixes are used. If any prefixes were not
234 used after disassembling the instruction, print the first prefix
235 instead of printing the instruction.
236 (putop): Set used_prefixes when prefixes are used.
237 (append_seg, OP_E, OP_G, OP_REG, OP_I, OP_sI, OP_J): Likewise.
238 (OP_DIR, OP_SIMD_Suffix): Likewise.
240 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
242 * sparc-opc.c: Fix up set, setsw, setuw operand kinds.
243 Support signx %reg, clruw %reg.
245 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
247 * sparc-opc.c: Add aliases Solaris as supports.
249 Mon Jun 7 12:04:52 1999 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
251 * Makefile.am (CFILES): Add arc-{dis,opc}.c and v850-{dis,opc}.c.
252 * Makefile.in: Regenerated.
254 1999-06-03 Philip Blundell <philb@gnu.org>
256 * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
257 when target is PC-relative.
259 1999-05-28 Linus Nordberg <linus.nordberg@canit.se>
261 * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC. Add MACM/MSACM. Add
264 * m68k-dis.c (fetch_arg): Add places `n', `o'.
266 * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
267 Add mcf5206e to appropriate instructions.
268 Add alias for MAC, MSAC.
270 * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
273 * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
274 macw, remsl, remul for mcf5307. Change mcf5200 --> mcf.
276 * m68k-dis.c: Add format `u' and places `h', `m', `M'.
278 1999-05-18 Alan Modra <alan@spri.levels.unisa.edu.au>
280 * i386-dis.c (Ed): Define.
281 (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
283 (OP_rm): Rename to OP_Rd.
286 (putop): Add const to template and p.
287 (print_insn_x86): Delete.
288 (print_insn_i386): Merge old function print_insn_x86. Add const
290 (struct dis386): Add const to name.
291 (dis386_att, dis386_intel): Add const.
292 (dis386_twobyte_att, dis386_twobyte_intel): Add const.
293 (names32, names16, names8, names_seg, index16): Add const.
294 (grps, prefix_user_table, float_reg): Add const.
295 (float_mem_att, float_mem_intel): Add const.
296 (oappend): Add const to s.
297 (OP_REG): Add const to s.
298 (ptr_reg): Add const to s.
299 (dofloat): Add const to dp.
300 (OP_C): Don't skip modrm, it's now done in OP_Rd.
303 (OP_Rd): Check for valid mod. Call Op_E to print.
304 (OP_E): Handle d_mode arg. Check for bad sfence,lea,lds etc.
305 (OP_MS): Check for valid mod. Call Op_EM to print.
306 (OP_3DNowSuffix): Set obufp and use oappend rather than
307 strcat. Call BadOp() for errors.
308 (OP_SIMD_Suffix): Likewise.
309 (BadOp): New function.
311 1999-05-12 Alan Modra <alan@spri.levels.unisa.edu.au>
313 * i386-dis.c (dis386_intel): Remove macro chars, except for
314 jEcxz. Change cWtR and cRtd to cW and cR.
315 (dis386_twobyte_intel): Remove macro chars here too.
316 (putop): Handle R and W macros for intel mode.
318 * i386-dis.c (SIMD_Fixup): New function.
319 (dis386_twobyte_att): Use it on movlps and movhps, and change
320 Ev to EX on these insns. Change movmskps Ev, XM to Gv, EX.
321 (dis386_twobyte_intel): Same here.
323 * i386-dis.c (Av): Remove.
327 (OP_SIMD_Suffix): New function.
328 (OP_DIR): Remove dead code.
329 (eAX_reg..eDI_reg): Renumber.
330 (onebyte_has_modrm): Table numbering comments.
331 (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
332 (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
333 checks. Print error on invalid dp->bytemode2. Remove simd_cmp,
334 and handle SIMD cmp insns in OP_SIMD_Suffix.
335 (info->bytes_per_line): Bump from 5 to 6.
337 (OP_E): Use INTERNAL_DISASSEMBLER_ERROR. Handle sfence.
338 (OP_3DNowSuffix): Ensure mnemonic index unsigned.
340 PIII SIMD support from Doug Ledford <dledford@redhat.com>
341 * i386-dis.c (XM, EX, None): Define.
342 (OP_XMM, OP_EX, OP_None): New functions.
343 (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
344 (GRP14): Rename to GRPAMD.
345 (GRP*): Add USE_GROUPS flag.
347 (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
348 (twobyte_has_modrm): Add SIMD entries.
349 (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
350 (grps): Add SIMD insns.
351 (print_insn_x86): New vars uses_f3_prefix and simd_cmp. Don't
352 oappend repz if uses_f3_prefix. Add code to handle new groups for
355 From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
356 * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
357 operand from Av to Jv.
359 1999-05-07 Nick Clifton <nickc@cygnus.com>
361 * mcore-dis.c (print_insn_mcore): Use .short to display
362 unidentified instructions, not .word.
364 1999-04-26 Tom Tromey <tromey@cygnus.com>
366 * aclocal.m4, configure: Updated for new version of libtool.
368 1999-04-14 Doug Evans <devans@casey.cygnus.com>
370 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
371 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
373 Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
375 * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
378 1999-04-10 Doug Evans <devans@casey.cygnus.com>
380 * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
381 * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
383 1999-04-06 Ian Lance Taylor <ian@zembu.com>
385 * opintl.h (LC_MESSAGES): Never define.
387 1999-04-04 Ian Lance Taylor <ian@zembu.com>
389 * i386-dis.c (intel_syntax, open_char, close_char): Make static.
390 (separator_char, scale_char): Likewise.
391 (print_insn_x86): Likewise.
392 (print_insn_i386): Likewise. Add declaration.
394 1999-03-26 Doug Evans <devans@casey.cygnus.com>
396 * fr30-dis.c: Rebuild.
397 * m32r-dis.c: Rebuild.
399 1999-03-23 Ian Lance Taylor <ian@zembu.com>
401 * m68k-opc.c: Change compare instructions to use "@s" rather than
402 ";s" when used with an immediate operand.
404 1999-03-22 Doug Evans <devans@casey.cygnus.com>
406 * cgen-opc.c (cgen_set_cpu): Delete.
407 (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
408 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
410 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
412 * po/opcodes.pot: Rebuild.
414 1999-03-16 Martin Hunt <hunt@cygnus.com>
416 * d30v-opc.c (mvtsys): Remove FLAG_LKR.
418 1999-03-11 Doug Evans <devans@casey.cygnus.com>
420 * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
421 (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
422 (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
423 * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
424 * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
425 * m32r-opinst.c: Rebuild.
427 1999-02-25 Doug Evans <devans@casey.cygnus.com>
429 * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
430 (cgen_hw_lookup_by_num): Rewrite.
431 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
432 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
433 * m32r-opinst.c: Rebuild.
435 Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
437 * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
438 (insert_jhint): Fix insertion mask.
439 * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
441 1999-02-10 Doug Evans <devans@casey.cygnus.com>
443 * Makefile.in: Rebuild.
445 1999-02-09 Doug Evans <devans@casey.cygnus.com>
447 * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
448 * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
449 * Makefile.am: Remove references to them.
450 (HFILES): Add fr30-desc.h,m32r-desc.h.
451 (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
453 (ALL_MACHINES): Update.
454 * configure.in: Redo handling of cgen_files.
455 (bfd_i960_arch): Delete i960c-*.lo files.
456 * configure: Regenerate.
457 * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
458 (hash_insn_array): Rewrite.
459 * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
460 (hash_insn_array): Rewrite.
461 * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
462 (cgen_lookup_insn,cgen_get_insn_operands): Define here.
463 (cgen_lookup_get_insn_operands): Ditto.
464 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
465 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
466 * po/POTFILES.in: Rebuild.
467 * po/opcodes.pot: Rebuild.
469 Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
471 * Makefile.am: Rebuild dependencies.
472 (HFILES): Add fr30-opc.h.
473 (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
474 * Makefile.in: Rebuild.
476 * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
477 Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
479 * acconfig.h: Remove.
480 * configure: Rebuild with current autoconf/automake.
481 * aclocal.m4: Likewise.
482 * config.in: Likewise.
483 * Makefile.in: Likewise.
485 Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
487 * m68k-opc.c: Correct move (not movew) to status word on 5200.
489 Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
491 * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
492 * i386-dis.c (x_mode): Define.
496 (dis386_twobyte): Remove.
497 (dis386_twobyte_att): New.
498 (dis386_twobyte_intel): New.
499 (print_insn_x86): Use new arrays.
501 (float_mem_intel): New.
502 (float_mem_att): New.
503 (dofloat): Use new float_mem arrays.
504 (print_insn_i386_att): New.
505 (print_insn_i386_intel): New.
506 (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
507 (putop): Handle intel syntax.
508 (OP_indirE): Handle intel syntax.
509 (OP_E): Handle intel syntax.
510 (OP_I): Handle intel syntax.
511 (OP_sI): Handle intel syntax.
512 (OP_OFF): Handle intel syntax.
516 1999-01-27 Doug Evans <devans@casey.cygnus.com>
518 * fr30-opc.h,fr30-opc.c: Rebuild.
519 * i960c-opc.h,i960c-opc.c: Rebuild.
520 * m32r-opc.c: Rebuild.
522 Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
524 * hppa-dis.c: revert HP merge changes until HP gives us
527 1999-01-19 Nick Clifton <nickc@cygnus.com>
529 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
530 offsets as well as symbloic address.
532 Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
534 * hppa-dis.c: fix comments and some indentation.
536 1999-01-12 Doug Evans <devans@casey.cygnus.com>
538 * fr30-opc.c,i960c-opc.c: Regenerate.
540 1999-01-11 Doug Evans <devans@casey.cygnus.com>
542 * fr30-opc.c: Regenerate.
544 1999-01-06 Doug Evans <devans@casey.cygnus.com>
546 * m32r-dis.c: Regenerate.
548 1999-01-05 Doug Evans <devans@casey.cygnus.com>
550 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
551 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
552 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
554 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
556 * configure.in: Require autoconf 2.12.1 or higher.
558 1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
560 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
562 Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
564 * fr30-opc.c: Regenerated.
566 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
568 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
570 1998-12-15 Dave Brolley <brolley@cygnus.com>
572 * fr30-opc.c,fr30-opc.h: Regenerated.
574 1998-12-14 Dave Brolley <brolley@cygnus.com>
576 * fr30-opc.c,fr30-opc.h: Regenerated.
578 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
580 * fr30-opc.c,fr30-opc.h: Regenerated.
582 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
584 * m32r-opc.c: Regenerate.
586 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
588 * dis-buf.c (generic_strcat_address): reformat to GNU coding
589 conventions. change sprintf call to an sprintf_vma call.
591 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
593 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
595 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
597 The following changes were made by
598 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
599 David Taylor <taylor@texas.cygnus.com>, and
600 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
601 merge in changes by HP; HP did not create ChangeLog entries.
603 * dis-buf.c (generic_strcat_address): new function.
605 * hppa-dis.c: Changes to improve hppa disassembly.
606 Changed formatting in : reg_names, fp_reg_names,control_reg,
607 New variables : sign_extension_names, deposit_names, conversion_names
608 float_test_names, compare_cond_names_double, add_cond_names_double,
609 logical_cond_names_double, unit_cond_names_double,
610 branch_push_pop_names, saturation_names, shift_names, mix_names,
611 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
612 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
613 (fput_const): renamed as fput_hex_const
615 - use the macros fputs_filtered and
616 fput_decimal_const whenever possible; calls to sign_extend require
617 2 params -- add a missing second param of 0.
618 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
619 architecture version number of current machine. HP folks are
620 trying to handle situation where the target program was compiled
621 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
623 - added new cases : 'g', 'B', 'm'
624 - added cases specifically for PA 2.0
625 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
626 - calls to fput_const become calls to fput_hex_const
628 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
630 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
631 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
632 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
633 * Makefile.in: Rebuilt.
634 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
636 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
637 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
639 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
641 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
643 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
645 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
647 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
648 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
650 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
652 * fr30-opc.c: Regenerate.
654 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
656 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
658 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
660 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
662 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
664 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
666 1998-11-30 Doug Evans <devans@casey.cygnus.com>
668 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
669 CGEN_INSN_BASE_VALUE.
670 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
671 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
673 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
675 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
677 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
679 * fr30-asm.c,fr30-dis.c: Regenerated.
681 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
683 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
685 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
687 * fr30-opc.c: Regenerated.
689 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
691 * fr30-opc.c: Regenerated.
692 * fr30-opc.h: Regenerated.
693 * fr30-dis.c: Regenerated.
694 * fr30-asm.c: Regenerated.
696 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
698 * mips-opc.c (sync.p,sync.l): Swap insn values.
700 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
702 * fr30-opc.c: Regenerate.
704 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
706 * fr30-opc.c: Regenerated.
707 * fr30-opc.h: Regenerated.
709 1998-11-18 Doug Evans <devans@casey.cygnus.com>
711 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
712 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
714 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
716 * fr30-opc.c: Regenerated.
718 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
720 * fr30-opc.c: Regenerated.
721 * fr30-opc.h: Regenerated.
722 * fr30-dis.c: Regenerated.
723 * fr30-asm.c: Regenerated.
725 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
727 * po/opcodes.pot: Regenerated.
728 * fr30-opc.c: Regenerated.
729 * fr30-opc.h: Regenerated.
730 * fr30-dis.c: Regenerated.
731 * fr30-asm.c: Regenerated.
733 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
735 * disassemble.c (disassembler): Add support for FR30 target.
737 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
739 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
740 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
742 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
744 * po/opcodes.pot: Regenerate.
745 * po/POTFILES.in: Regenerate.
746 * fr30-opc.c: Regenerate.
747 * fr30-opc.h: Regenerate.
749 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
751 * m32r-asm.c: Regenerate.
753 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
755 * configure.in: Added case for bfd_fr30_arch.
756 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
757 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
758 (CLEANFILES): Added stamp-fr30.
760 * fr30-asm.c: New file.
761 * fr30-dis.c: New file.
762 * fr30-opc.c: New file.
763 * fr30-opc.h: New file.
764 * po/POTFILES.in: Regenerated
765 * po/opcodes.pot: Regenerated
767 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
769 * configure.in: detect cygwin* instead of cygwin32*
770 * configure: regenerate
772 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
774 * mips-opc.c (IS_M): Added.
776 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
778 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
780 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
782 * m32r-opc.h,m32r-opc.c: Regenerate.
784 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
786 * i386-dis.c (OP_3DNowSuffix): New static function.
789 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
790 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
791 (insn_codep): New static variable.
792 (print_insn_x86): Init insn_codep after prefixes.
793 (grps): Add GRP14 entries for prefetch, prefetchw.
796 From Jeff B Epler <jepler@usgs.gov>
797 * i386-dis.c (Suffix3DNow): New table.
799 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
801 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
803 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
805 * d10v-dis.c (print_operand): If num is nonzero, then
806 add OPERAND_ACC1, not OPERAND_ACC0.
808 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
810 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
813 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
815 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
818 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
820 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
822 1998-09-09 Michael Meissner <meissner@cygnus.com>
824 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
827 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
829 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
831 (print_insn_little_arm): Detect Thumb symbols in elf object
834 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
836 * alpha-dis.c (print_insn_alpha): Use the machine type to
837 decide which PALcode set to include.
839 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
841 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
843 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
845 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
846 MSUB and MSUBS instructions.
848 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
850 * ppc-opc.c (powerpc_operands): Omit parens around additions in
853 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
855 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
856 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
857 +, -, and d for ColdFire.
859 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
860 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
861 (extract_mbe): Likewise.
863 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
865 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
867 * m10300-opc.c: First cut at UDF instructions.
869 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
871 * m32r-opc.c: Regenerate (remove semantic descriptions).
873 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
875 * arm-dis.c (print_insn_big_arm): Fix indentation.
876 (print_insn_little_arm): Likewise.
878 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
880 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
882 (print_insn_little_arm): Likewise.
884 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
886 Move all global state data into opcode table struct, and treat
887 opcode table as something that is "opened/closed".
888 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
889 (cgen_asm_init): Delete.
890 (cgen_set_parse_operand_fn): New function.
891 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
892 (cgen_dis_init): Delete.
893 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
894 (cgen_current_{opcode_table_mach,endian}): Delete.
895 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
897 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
899 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
902 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
904 * m10300-opc.c: Add entries for "no_match_operands" field in
907 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
909 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
911 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
913 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
915 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
917 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
919 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
921 (OP_J): Remove unnecessary subtraction when 16-bit displacement
922 will be masked later.
924 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
926 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
928 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
930 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
932 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
934 * m10300-dis.c: Only recognize instructions from the currently
936 * m10300-opc.c: Add field indicating the particular variant of
937 the mn10300 each instruction is available on.
939 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
941 * configure.in: For bfd_vax_arch, build vax-dis.lo.
942 * Makefile.am: Rebuild dependencies.
943 (CFILES): Add vax-dis.c.
944 (ALL_MACHINES): Add vax-dis.lo.
945 * aclocal.m4: Rebuild with current libtool.
946 * configure, Makefile.in: Rebuild.
948 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
950 * vax-dis.c: New file, from work by Pauline Middelink
951 <middelin@polyware.iaf.nl>.
952 * disassemble.c (ARCH_vax): Define if ARCH_all.
953 (disassembler): Add case for ARCH_vax.
954 * makefile.vms: Support compilation on vms/vax.
956 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
958 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
959 related to sign extension and the size of ints.
961 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
963 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
964 instructions. Support (sp) addressing mode by expanding it into
967 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
969 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
971 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
973 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
975 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
977 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
980 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
982 * mips-dis.c (print_insn_little_mips): Previously, instruction
983 printing references the symbol table to determine whether the
984 instruction resides in a block regular instructions or mips16
985 instructions. However, when the disassembler gets used in other
986 environments where the symbol table is not present, we no longer
987 rely in the symbol table, rather, use the low bit of the
988 instructions address to guess. There should be no change for usage
989 of the disassembler in host based programs, gdb, objdump.
990 (print_insn_big_mips): ditto.
991 (print_insn_mips): ditto
993 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
995 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
997 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
999 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
1001 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1003 * i386-dis.c (index16): Add '%' to register names. Use ','
1006 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1008 * i386-dis.c: Don't print opcode suffix when we can figure out the
1009 size (and gas can!) by register operands, or from the default
1011 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
1013 (dis386, dis386_twobyte, grps): Use new suffix macros.
1014 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
1015 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
1016 order of cmps operands to agree with Intel docs. Correct operand
1017 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
1018 agree with Intel docs.
1019 (print_insn_x86): Print orphan fwait before other prefixes.
1020 Return correct byte count for orphan fwait with prefixes. Don't
1021 print `bound' operands in reverse order.
1022 (ckprefix): Stop accumulating prefixes if we get fwait.
1023 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
1025 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
1027 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
1028 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
1030 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1032 Fix problems when bfd_vma is wider than long.
1033 * i386-dis.c: Make op_address and start_pc unsigned.
1034 (set_op): Make parameter unsigned.
1035 (print_insn_x86): Cast to bfd_vma when passing a value to
1037 * ns32k-dis.c (CORE_ADDR): Don't define.
1038 (print_insn_ns32k): Change type of addr to bfd_vma. Use
1039 bfd_scan_vma to read back address.
1040 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
1042 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
1043 (NEXTULONG): New definition.
1044 (print_insn_m68k): Avoid overflow when computing third argument of
1046 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
1047 Use disp instead of val to store offset values.
1048 (print_indexed): Use base_disp instead of word to store base
1049 displacement, to avoid overflow.
1050 * m10300-dis.c (disassemble): Cast value to long when computing
1051 pc-relative address, to get correct sign extension.
1053 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
1055 * m32r-opc.c: Regenerate.
1057 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
1059 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
1060 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
1062 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
1064 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
1066 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1068 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
1070 (OP_DSreg): Rename from OP_DSSI.
1071 (OP_ESreg): Rename from OP_ESDI.
1072 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
1074 (append_seg): Rename from append_prefix.
1075 (ptr_reg): New function.
1076 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
1078 (PREFIX_ADDR): Rename from PREFIX_ADR.
1079 (float_reg): Add non-broken opcodes for people who don't want
1082 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1084 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
1087 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
1089 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
1091 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
1093 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
1094 0; produce error message for shifts of size 32 (or 64 for 64-bit
1095 shifts), because the hardware doesn't support them.
1097 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
1099 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
1100 LONG_2, LONG_2b formats to use this new operand.
1102 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
1104 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
1106 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
1108 * sparc-dis.c (print_insn_sparc): big endian instruction / little
1109 endian data support.
1111 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
1113 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
1114 and SHORT_B3b formats to use Rb instead of Ra.
1116 Add FLAG_MUL16 to MUL2XH opcode.
1118 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
1119 to existing 1.1.1 parallelisation prohibition procedure.
1121 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
1123 * m32r-asm.c,m32r-dis.c: Regenerate.
1125 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
1127 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
1128 with a shift count of 0.
1130 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
1132 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
1133 (cgen_hw_lookup_by_num): New function.
1135 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
1137 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
1139 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
1141 * sparc-dis.c (print_insn_sparc): Always fetch instructions
1142 as big-endian on SPARClite.
1144 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
1146 * d30v-opc.c (pre_defined_register): Remove alias for r0.
1148 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
1150 * po/Make-in (install-info): New target.
1152 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
1154 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
1155 * configure: Rebuild.
1157 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
1159 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
1160 variety of ISA2 instructions to set bottom ten bits of trap code.
1162 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
1164 * Makefile.am (config.status): Add explicit target so that
1165 config.status depends upon bfd/configure.in.
1166 * Makefile.in: Rebuild.
1168 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1170 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
1171 instructions to set bottom ten bits of break code.
1172 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
1173 for above optional argument.
1175 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
1177 * makefile.vms: Run dec c with /nodebug.
1179 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
1181 * Makefile.in: Rebuilt.
1182 * Makefile.am: Regenerated dependencies with mkdep.
1184 * opintl.h (_): Define as dgettext.
1186 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
1188 * cgen-asm.c: Internationalised.
1189 * m32r-asm.c: Internationalised.
1190 * m32r-dis.c: Internationalised.
1191 * m32r-opc.c: Internationalised.
1193 * aclocal.m4: Regenerated.
1194 * configure: Regenerated.
1195 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1196 * Makefile.in: Rebuild.
1197 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1198 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1200 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
1202 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
1204 * aclocal.m4, configure: Rebuild with current tools.
1206 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
1208 * opintl.h: New file - contains internationalisation macros used
1209 by source files in this directory.
1210 * po/: New subdirectory - contains internationalisation files.
1211 * po/Make-in: New file - Makefile constructor.
1212 * po/POTFILES.in: New file - list of files in opcodes directory
1213 that should be scan for internationalisation macros.
1214 * po/opcodes.pot: New file - list of internationisation strings
1215 found in files mentioned in po/POTFILES.in.
1216 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
1217 entry. Add intl directory to include paths.
1218 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1219 HAVE_STRCPY, HAVE_LC_MESSAGES
1220 * configure.in: Add rule to build Makefile in po subdirectory.
1221 * Makefile.in: Rebuilt.
1222 * aclocal.m4: Rebuilt.
1223 * config.in: Rebuilt.
1224 * configure: Rebuilt.
1225 * alpha-opc.c: Internationalised.
1226 * arc-dis.c: Internationalised.
1227 * arc-opc.c: Internationalised.
1228 * arm-dis.c: Internationalised.
1229 * cgen-asm.c: Internationalised.
1230 * d30v-dis.c: Internationalised.
1231 * dis-buf.c: Internationalised.
1232 * h8300-dis.c: Internationalised.
1233 * h8500-dis.c: Internationalised.
1234 * i386-dis.c: Internationalised.
1235 * m10200-dis.c: Internationalised.
1236 * m10300-dis.c: Internationalised.
1237 * m68k-dis.c: Internationalised.
1238 * m88k-dis.c: Internationalised.
1239 * mips-dis.c: Internationalised.
1240 * ns32k-dis.c: Internationalised.
1241 * opintl.h: Internationalised.
1242 * ppc-opc.c: Internationalised.
1243 * sparc-dis.c: Internationalised.
1244 * v850-dis.c: Internationalised.
1245 * v850-opc.c: Internationalised.
1247 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1249 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1250 (asm_hash_table_entries): New variable.
1251 (cgen_asm_init): Free asm_hash_table_entries.
1252 (hash_insn_array,hash_insn_list): New functions.
1253 (build_asm_hash_table): Use them. Hash macro insns as well.
1254 (cgen_asm_lookup_insn): Update.
1255 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1256 (dis_hash_table_entries): New variable.
1257 (cgen_dis_init): Free dis_hash_table_entries.
1258 (hash_insn_array,hash_insn_list): New functions.
1259 (build_dis_hash_table): Use them. Hash macro insns as well.
1260 (cgen_dis_lookup_insn): Update.
1261 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1262 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1263 (cgen_macro_insn_count): New function.
1264 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1266 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1268 * i386-dis.c (OP_DSSI): Print segment override.
1270 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1272 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1275 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1277 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1278 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1279 * configure.in: Define and substitute WIN32LDFLAGS and
1281 * aclocal.m4: Rebuild with new libtool.
1282 * configure, Makefile.in: Rebuild.
1284 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1286 * m32r-opc.c: Regenerate.
1288 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1290 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1291 before trying to copy it.
1292 * Makefile.in: Rebuild.
1294 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1296 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1298 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1300 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1301 from an arbitrary valid buffer instead of fetching them on demand
1303 (invalid_float): use bit_extract_simple() instead of bit_extract().
1305 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1307 From H.J. Lu <hjl@gnu.org>:
1308 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1311 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1313 * Branched binutils 2.9.
1315 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1317 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1318 disassembling last 4 bytes of a section.
1320 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1322 Fix some gcc -Wall warnings:
1323 * arc-dis.c (print_insn): Add casts to avoid warnings.
1324 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1325 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1326 * m10200-dis.c (disassemble): Likewise.
1327 * m10300-dis.c (disassemble): Likewise.
1328 * ns32k-dis.c (print_insn_ns32k): Likewise.
1329 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1330 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1331 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1332 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1333 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1334 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1335 * tic80-dis.c (print_one_instruction): Likewise.
1336 * w65-dis.c (print_operand): Likewise.
1337 * z8k-dis.c (fetch_data): Likewise.
1338 * a29k-dis.c: Add return type for find_byte_func_type.
1339 * arc-opc.c: Include <stdio.h>. Remove declarations of
1340 insert_multshift and extract_multshift.
1341 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1343 (extract_value): Fully parenthesize expression.
1344 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1345 * h8500-opc.h (h8500_table): Fully bracket initializer.
1346 * w65-opc.h (optable): Likewise.
1347 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1348 * i386-dis.c (OP_E): Initialize local variables.
1349 * m10200-dis.c (print_insn_mn10200): Likewise.
1350 * mips-dis.c (print_insn_mips16): Likewise.
1351 * sh-dis.c (print_insn_shx): Likewise.
1352 * v850-dis.c (print_insn_v850): Likewise.
1353 * ns32k-dis.c (print_insn_arg): Declare.
1354 (get_displacement, invalid_float): Declare.
1355 (list_search, sign_extend, flip_bytes): Declare return type.
1356 (get_displacement): Likewise.
1357 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1359 (print_insn_ns32k): Make i unsigned.
1360 (invalid_float): Make static. Declare type of val.
1361 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1362 on each for iteration.
1363 * tic30-dis.c (get_indirect_operand): Likewise.
1364 * z8k-dis.c (print_insn_z8001): Declare return type.
1365 (print_insn_z8002): Likewise.
1366 (unparse_instr): Fix sprintf format strings.
1368 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1370 * mips-opc.c: Add "sync.l" and "sync.p".
1372 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1374 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1375 default m68k variant to recognize.
1377 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1378 (ctrl, cobr, mem, ea): Likewise.
1379 (print_addr): Likewise. Remove cast.
1380 (ea): Cast argument of print_addr to bfd_vma.
1382 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1384 (cgen_parse_unsigned_integer): Likewise.
1385 (cgen_parse_address): Likewise.
1387 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1389 * i960-dis.c (ctrl): Add full braces to structure initialization.
1390 (cobr, mem, reg): Likewise.
1391 (ea): Correct parenthesization in expression.
1393 * cgen-asm.c: Include <ctype.h>.
1394 (build_asm_hash_table): Remove unused local variable i.
1395 (cgen_parse_keyword): Add casts to avoid warnings.
1397 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1398 symbol. Fix indentation.
1399 (print_insn_little_arm): Likewise.
1401 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1403 * configure.in: Use AM_DISABLE_SHARED.
1404 * aclocal.m4, configure: Rebuild with libtool 1.2.
1406 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1408 These patches are courtesy of Jonathan Walton and Tony Thompson
1409 (athompso@cambridge.arm.com).
1411 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1414 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1415 both the offset and the label closest to the destination.
1417 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1419 * m32r-opc.h: Regenerate.
1421 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1423 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1425 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1427 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1428 assume that info->symbols is non-empty.
1430 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1432 * alpha-opc.c (cvtqs) There is no such thing.
1433 (cvttq): Missing most of the /*d variants.
1435 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1437 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1438 delayed branches or jumps.
1440 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1442 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1444 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1445 * tic30-dis.c (print_branch): Likewise.
1447 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1449 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1450 saved_symbol code as it is no longer needed.
1452 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1454 * cgen-asm.c: Include symcat.h.
1455 * cgen-dis.c,cgen-opc.c: Ditto.
1456 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1458 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1460 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1462 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1464 * m32r-opc.[ch]: Regenerate.
1466 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1468 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1469 arguments. Don't perform validation here.
1470 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1472 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1474 * m32r-opc.c: Regenerate.
1476 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1478 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1479 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1481 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1483 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1485 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1487 * configure.in: Get the version number from BFD.
1488 * configure: Rebuild.
1490 From H.J. Lu <hjl@gnu.org>:
1491 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1492 * Makefile.in: Rebuild.
1494 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1496 * m32r-opc.c: Regenerate.
1497 * m32r-opc.h: Regenerate.
1499 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1501 * m32r-opc.c: Regenerate.
1503 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1505 Fix rac to accept only a0:
1506 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1507 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1508 Introduce OPERAND_GPR.
1509 * d10v-dis.c (print_operand): Likewise.
1511 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1513 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1514 (cgen_hw_lookup): Make result const.
1515 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1517 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1519 * configure, aclocal.m4: Rebuild with new libtool.
1521 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1523 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1524 instructions use a PC relative branch, not absolute.
1526 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1528 * configure.in: Set libtool_enable_shared rather than
1529 libtool_shared. Remove diversion hack.
1530 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1532 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1534 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1535 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1537 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1539 * tic30-dis.c: New file.
1540 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1541 * configure.in: Handle bfd_tic30_arch.
1542 * Makefile.am: Rebuild dependencies.
1543 (CFILES): Add tic30-dis.c
1544 (ALL_MACHINES): Add tic30-dis.lo.
1545 * configure, Makefile.in: Rebuild.
1547 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1549 * m32r-opc.h (HAVE_CPU_M32R): Define.
1551 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1553 * v850-opc.c (insertion routines): If both alignment and size is
1554 wrong then report this.
1556 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1558 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1559 Only recognize instructions for the current target_processor.
1561 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1563 * d10v-dis.c (PC_MASK): Correct value.
1564 (print_operand): If there's a reloc, don't calculate the
1565 address because they could be in different sections.
1567 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1569 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1570 instruction after the 4650's "mul" instruction; nobody's using the
1571 4010 these days. If object files someday indicate which processor
1572 variant they're intended for, we can do a better job at this.
1574 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1576 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1577 table provided entry size. Use CGEN_INSN_MNEMONIC.
1578 (cgen_parse_keyword): Rewrite.
1579 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1580 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1581 * cgen-opc.c: Clean up pass over `struct foo' usage.
1582 (cgen_keyword_lookup_value): Handle "" entry.
1583 (cgen_keyword_add): Likewise.
1585 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1587 * mips-opc.c: Add FP_D to s.d instruction flags.
1589 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1591 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1593 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1595 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1596 PC relative offset forms before the 15 bit forms. An assembler command
1597 line option now chooses the default.
1599 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1601 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1602 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1604 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1606 * configure: Only build libopcodes shared if --enable-shared's value
1607 was `yes', or was set to `*opcodes*'.
1608 * aclocal.m4: Likewise.
1609 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1610 original source of this bit of code. It's not clear what the best fix
1613 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1615 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1616 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1617 offset forms before the 15 bit forms, to default to the long forms.
1619 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1621 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1623 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1625 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1626 symbol if none is present.
1627 (print_insn_big_arm): Prevent examination of stored symbol if
1630 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1632 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1634 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1636 * disassemble.c: Remove disasm_symaddr() function.
1638 * arm-dis.c: Use info->symbol instead of info->flags to determine
1639 if disassmbly should be in Thumb or Arm mode.
1641 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1643 * arm-dis.c: Add support for disassembling Thumb opcodes.
1644 (print_insn_thumb): New function.
1646 * disassemble.c (disasm_symaddr): New function.
1648 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1649 (thumb_opcodes): Table of Thumb opcodes.
1651 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1653 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1655 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1656 and 'v' as operand types.
1658 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1660 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1661 <olivier.carmona@di.epfl.ch>.
1662 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1663 which has a two word opcode with a one word argument.
1665 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1667 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1668 unsigned, not signed.
1669 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1671 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1673 * d10v-dis.c (print_operand):
1674 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1676 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1678 * d10v-opc.c (OPERAND_FLAG): Split into:
1679 (OPERAND_FFLAG, OPERAND_CFLAG) .
1683 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1685 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1686 field for all INSN_MACRO's.
1687 * mips16-opc.c: same
1689 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1691 * mips-opc.c (sync,cache): These are 3900 insns.
1693 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1695 sh-opc.h (sh_table): Remove ftst/nan.
1697 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1699 * mips-opc.c (ffc, ffs): Fix mask.
1701 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1703 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1706 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1708 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1709 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1711 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1713 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1714 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1716 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1718 * v850-dis.c (disassemble): Replace // with /* ... */
1720 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1722 * sparc-opc.c: Add wr & rd for v9a asr's.
1723 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1724 (v9a_asr_reg_names): New variable.
1725 Patch from David Miller <davem@vger.rutgers.edu>.
1727 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1729 * sparc-opc.c (v9notv9a): New insn type.
1730 (IMPDEP): Move to the end to not conflict with edge8 et al.
1731 Patch from David Miller <davem@vger.rutgers.edu>.
1733 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1735 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1737 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1739 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1741 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1743 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1744 of disassemble_info structure to determine if an overlay address
1745 has a matching symbol in low memory.
1747 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1748 new symbol_at_address_func field in disassemble_info structure.
1750 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1752 * v850-opc.c (extract_d22): Use signed arithmatic.
1754 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1756 * mips-opc.c: Three op mult is not an ISA insn.
1758 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1760 * mips-opc.c: Fix formatting.
1762 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1764 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1765 than assuming that char is signed. Explicitly sign extend 16 bit
1766 values, rather than assuming that short is 16 bits.
1767 (OP_sI, OP_J, OP_DIR): Likewise.
1769 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1771 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1774 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1776 * v850-opc.c: Fix typo in comment.
1778 * v850-dis.c (disassemble): Add test of processor type when
1779 determining opcodes.
1781 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1783 * configure.in: Use a diversion to set enable_shared before the
1784 arguments are parsed.
1785 * configure: Rebuild.
1787 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1789 * m68k-opc.c (TBL1): Use ! rather than `.
1790 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1792 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1794 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1796 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1798 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1801 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1802 * aclocal.m4: Rebuild with new libtool.
1803 * configure: Rebuild.
1805 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1807 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1809 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1811 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1813 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1815 * v850-opc.c (v850_opcodes): Further rearrangements.
1817 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1819 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1821 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1823 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1826 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1828 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1830 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1832 * v850-opc.c: Initialise processors field of v850_opcode structure.
1834 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1836 Merge changes from Martin Hunt:
1838 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1840 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1841 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1842 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1844 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1846 * d30v-dis.c (print_insn): First operand of d*i (delayed
1847 branch) instructions is relative.
1849 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1850 (d30v_operand_table): Add IMM6S3 type.
1851 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1853 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1854 and cmp instructions.
1856 * d30v-opc.c: Correct entries for repeat*, and sat*.
1857 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1858 types. Correct several formats.
1860 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1862 * d30v-opc.c (pre_defined_registers): Change control registers.
1864 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1865 SHORT_C2. Manual was incorrect.
1867 * d30v-dis.c (lookup_opcode): Return value now indicates
1868 if an opcode has a short and a long form. Used for deciding
1869 to append a ".s" or ".l".
1870 (print_insn): Append a ".s" to an instruction if it is
1871 the short form and ".l" if it is a long form. Do not append
1872 anything if the instruction has only one possible size.
1874 * d30v-opc.c: Change mulx2h to require an even register.
1875 New form: SHORT_A2; a SHORT_A form that needs an even
1876 register as the first operand.
1878 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1879 instruction was not being disassembled if there were an odd
1880 number of instructions.
1882 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1884 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1886 * v850-dis.c (disassemble): Improved display of register lists.
1888 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1890 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1891 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1892 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1893 fandnot1s, fandnot2s.
1895 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1897 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1899 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1901 * cgen-asm.c (cgen_parse_address): New argument resultp.
1902 All callers updated.
1903 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1905 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1907 * mn10200-dis.c (disassemble): PC relative instructions are
1908 relative to the next instruction, not the current instruction.
1910 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1912 * v850-dis.c (disassemble): Only signed extend values that are not
1913 returned by extract functions.
1914 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1916 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1918 * v850-opc.c: Update comments. Remove use of
1919 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1921 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1923 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1925 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1927 * configure: Rebuilt with latest devo autoconf for NT support.
1929 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1931 * v850-dis.c (disassemble): Use curly brace syntax for register
1934 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1935 where r0 is being used as a destination register.
1937 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1939 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1941 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1943 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1945 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1947 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1948 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1951 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1953 * configure (cgen_files): Add support for v850e target.
1954 * configure.in (cgen_files): Add support for v850e target.
1956 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1958 * configure (cgen_files): Add support for v850ea target.
1959 * configure.in (cgen_files): Add support for v850ea target.
1961 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1963 * configure.in (bfd_arc_arch): Add.
1964 * configure: Rebuild.
1965 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1966 * Makefile.in: Rebuild.
1967 * arc-dis.c, arc-opc.c: New files.
1968 * disassemble.c (ARCH_all): Define ARCH_arc.
1969 (disassembler): Add ARC support.
1971 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1973 * v850-dis.c (disassemble): Add support for v850EA instructions.
1975 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1976 (v850_opcodes): Add v850EA instructions.
1978 * v850-dis.c (disassemble): Add support for v850E instructions.
1980 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1981 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1982 insert_spe, extract_spe): New Functions.
1983 (v850_opcodes): Add v850E instructions.
1985 * v850-opc.c: Reorganised and re-layed out to improve readability
1988 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1990 * configure: Rebuild with autoconf 2.12.1.
1992 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1994 * aclocal.m4, configure: Rebuild with new automake patches.
1996 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1998 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1999 * acinclude.m4: Just include acinclude.m4 from BFD.
2000 * aclocal.m4, configure: Rebuild.
2002 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
2004 * Makefile.am: New file, based on old Makefile.in.
2005 * acconfig.h: New file.
2006 * acinclude.m4: New file.
2007 * stamp-h.in: New file.
2008 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
2009 Removed shared library handling; now handled by libtool. Replace
2010 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
2011 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
2012 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
2013 handling in AC_OUTPUT.
2014 * dep-in.sed: Change .o to .lo.
2015 * Makefile.in: Now built with automake.
2016 * aclocal.m4: Now built with aclocal.
2017 * config.in, configure: Rebuild.
2019 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
2021 * mips-opc.c: Fix typo/thinko in "eret" instruction.
2023 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
2025 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2027 * sparc-dis.c (sorted_opcodes): New static local.
2028 (struct opcode_hash): `opcode' is pointer to const element.
2029 (build_hash): First arg is now table of sorted pointers.
2030 (print_insn_sparc): Sort opcodes by sorting table of pointers.
2031 (compare_opcodes): Update.
2033 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
2035 * cgen-opc.c: #include <ctype.h>.
2036 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2037 Handle case insensitive hashing.
2038 (hash_keyword_value): Change type of `value' to unsigned int.
2040 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2042 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2043 precision FP, mark it as such. Likewise for double precision
2044 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2047 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2049 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2051 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2052 nesting depth when all the macros are expanded.
2054 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2056 * sparc-opc.c: The fcmp v9a instructions take an integer register
2057 as a destination, not a floating point register. From Christian
2058 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2060 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2062 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2063 syntax. From Roman Hodek
2064 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2066 * i386-dis.c (twobyte_has_modrm): Fix pand.
2068 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2070 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2072 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2074 * arm-dis.c: Add prototypes for arm_decode_shift and
2077 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2079 * mips-opc.c: Add r3900 insns.
2081 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2083 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2084 print delay slot instructions on the same line. When using a PC
2085 relative load, add a comment with the value being loaded if it can
2088 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2090 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2091 to pushS/popS for segment regs and byte constant so that
2092 pushw/popw printed when in 16 bit data mode.
2094 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2095 print cbtw, cwtd in 16 bit data mode.
2096 * i386-dis.c (putop): extra case W to support above.
2098 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2099 address size prefix in 16 bit address mode.
2101 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2103 * sh-dis.c: Reindent. Rename local variable fprintf to
2106 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2108 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2110 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2112 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2114 * mips16-opc.c (mip16_opcodes): same.
2116 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2118 * m68k-opc.c (moveb): Change $d to %d.
2120 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2122 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2123 (twobyte_has_modrm): Likewise.
2125 (OP_MMX, OP_EM, OP_MS): New static functions.
2127 * i386-dis.c: Revert patch of April 4. The output now matches
2130 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2132 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2135 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2137 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2139 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2141 * Makefile.in (install): Depend upon installdirs.
2142 (installdirs): New target.
2144 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2146 From Thomas Graichen <graichen@rzpd.de>:
2147 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2148 * configure: Rebuild.
2150 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2152 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2153 Delete string{,s}.h support.
2155 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2157 * cgen-asm.c (cgen_parse_operand_fn): New global.
2158 (cgen_parse_{{,un}signed_integer,address}): Update call to
2159 cgen_parse_operand_fn.
2160 (cgen_init_parse_operand): New function.
2161 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2162 from cgen_asm_init_parse.
2163 (m32r_cgen_assemble_insn): New operand `errmsg'.
2164 Delete call to as_bad, return error message to caller.
2165 (m32r_cgen_asm_hash_keywords): #if 0 out.
2167 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2169 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2171 [case 'J']: Fix typo in register name.
2173 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2175 * configure.in: Substitute SHLIB_LIBS.
2176 * configure: Rebuild.
2177 * Makefile.in (SHLIB_LIBS): New variable.
2178 ($(SHLIB)): Use $(SHLIB_LIBS).
2180 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2182 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2184 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2186 * disassemble.c (disassembler): Handle m32r.
2188 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2190 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2191 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2192 * Makefile.in (CFILES): Add them.
2193 (ALL_MACHINES): Add them.
2194 (dependencies): Regenerate.
2195 * configure.in (cgen_files): New variable.
2196 (bfd_m32r_arch): Add entry.
2197 * configure: Regenerate.
2199 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2201 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2202 * configure: Rebuild.
2204 * Makefile.in: Rebuild dependencies.
2206 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2208 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2211 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2213 * Branched binutils 2.8.
2215 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2217 * m10200-dis.c: Rename from mn10200-dis.c.
2218 * m10200-opc.c: Rename from mn10200-opc.c.
2219 * m10300-dis.c: Rename from mn10300-dis.c
2220 * m10300-opc.c: Rename from mn10300-opc.c.
2221 * Makefile.in: Update accordingly.
2223 * mips16-opc.c: Add mul and dmul macros.
2225 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2227 * makefile.vms: Update CFLAGS, add clean target.
2229 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2231 * mips-opc.c: Add "wait". From Ralf Baechle
2232 <ralf@gnu.ai.mit.edu>.
2234 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2235 * configure, config.in: Rebuild.
2236 * sysdep.h: Include <stdlib.h> if it exists.
2237 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2239 * Makefile.in: Rebuild dependencies.
2241 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2243 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2244 Andrew Bray <andy@madhouse.demon.co.uk>.
2246 * mips-opc.c: Add cast when setting mips_opcodes.
2248 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2250 * v850-dis.c (disassemble): Fix sign extension problem.
2251 * v850-opc.c (extract_d*): Fix sign extension problems to make
2252 disassembly calculate branch offsets correctly.
2254 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2256 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2258 * mips-opc.c: Add dctr and dctw.
2260 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2262 * d30v-dis.c (print_insn): Change the way signed constants
2265 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2267 * Makefile.in (BFD_H): New variable.
2268 (HFILES): New variable.
2269 (CFILES): Add all C files.
2270 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2271 Delete old dependencies, and build new ones.
2272 * dep-in.sed: New file.
2274 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2276 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2278 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2280 * mn10200-opc.c: Change "trap" to "syscall".
2281 * mn10300-opc.c: Add new "syscall" instruction.
2283 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2285 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2286 mulul insns on the coldfire.
2288 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2290 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2291 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2292 (print_insn_little_arm): Likewise.
2294 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2296 Based on patches from H.J. Lu <hjl@lucon.org>:
2297 * i386-dis.c (fetch_data): Add prototype.
2298 * m68k-dis.c (fetch_data): Add prototype.
2299 (dummy_print_address): Add prototype. Make static.
2300 * ppc-opc.c (valid_bo): Add prototype.
2301 * sparc-dis.c (build_hash_table): Add prototype.
2302 (is_delayed_branch, compute_arch_mask): Add prototypes.
2303 (print_insn_sparc): Make several local variables const.
2304 (compare_opcodes): Change arguments to const PTR. Add prototype.
2305 * sparc-opc.c (arg): Change name field to be const.
2306 (lookup_name, lookup_value): Add prototypes. Change table and
2307 name parameters to be const.
2308 (sparc_encode_asi): Change name parameter to be const.
2309 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2310 (sparc_encode_sparclet_cpreg): Likewise.
2311 (sparc_decode_asi): Change return type to be const.
2312 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2313 (sparc_decode_sparclet_cpreg): Likewise.
2315 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2317 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2318 Solaris doesn't like the combined options, and the -f is
2320 (stamp-tshlink, install): Likewise.
2322 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2324 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2327 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2329 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2331 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2333 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2336 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2338 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2340 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2342 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2344 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2346 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2348 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2350 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2351 floatformat_to_double to make portable.
2352 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2355 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2357 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2358 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2360 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2362 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2363 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2365 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2367 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2368 (OFF_SL_BR_SCALED): ... to this, and added the flag
2369 TIC80_OPERAND_BASEREL to the flags word.
2370 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2373 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2375 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2376 Change mips_opcodes from const array to a pointer,
2377 and change bfd_mips_num_opcodes from const int to int,
2378 so that we can increase the size of the mips opcodes table
2381 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2383 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2384 store BITNUM values in the table in one's complement form
2385 to match behavior when assembler is given a raw numeric
2386 value for a BITNUM operand.
2387 * tic80-dis.c (print_operand_bitnum): Ditto.
2389 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2391 * d30v-opc.c: Removed references to FLAG_X.
2393 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2395 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2397 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2399 * Makefile.in: Added d30v object files.
2400 * configure: (bfd_d30v_arch) Rebuilt.
2401 * configure.in: (bfd_d30v_arch) Added new case.
2402 * d30v-dis.c: New file.
2403 * d30v-opc.c: New file.
2404 * disassemble.c (disassembler) Add entry for d30v.
2406 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2408 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2409 representations for the floating point BITNUM values.
2411 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2413 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2414 in the table in one's complement form, as they appear in the
2416 (tic80_symbol_to_value): Use macros to access predefined
2418 (tic80_value_to_symbol): Ditto.
2419 (tic80_next_predefined_symbol): New function.
2420 * tic80-dis.c (print_operand_bitnum): Remove code that did
2421 one's complement for BITNUM values.
2423 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2425 * makefile.vms: Remove 8 bit characters. Update to latest
2428 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2430 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2432 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2434 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2435 (IMM24_PCREL): Likewise.
2437 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2439 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2440 address for an extended PC relative instruction that is not a
2443 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2445 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2448 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2450 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2451 (tic80_opcodes): Sort entries so that long immediate forms
2452 come after short immediate forms, making it easier for
2453 assembler to select the right one for a given operand.
2455 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2457 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2459 (print_insn_mips16): Likewise.
2461 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2463 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2464 a symbol class that restricts translation to just that
2465 class (general register, condition code, etc).
2467 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2469 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2470 and REG_DEST_E for register operands that have to be
2471 an even numbered register. Add REG_FPA for operands that
2472 are one of the floating point accumulator registers.
2473 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2474 (tic80_opcodes): Change entries that need even numbered
2475 register operands to use the new operand table entries.
2476 Add "or" entries that are identical to "or.tt" entries.
2478 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2480 * mips16-opc.c: Add new cases of exit instruction for
2482 * mips-dis.c (print_mips16_insn_arg): Display floating point
2483 registers in operands of exit instruction. Print `$' before
2484 register names in operands of entry and exit instructions.
2486 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2488 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2489 pairs for all predefined symbols recognized by the assembler.
2490 Also used by the disassembling routines.
2491 (tic80_symbol_to_value): New function.
2492 (tic80_value_to_symbol): New function.
2493 * tic80-dis.c (print_operand_control_register,
2494 print_operand_condition_code, print_operand_bitnum):
2495 Remove private tables and use tic80_value_to_symbol function.
2497 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2499 * d10v-dis.c (print_operand): Change address printing
2500 to correctly handle PC wrapping. Fixes PR11490.
2502 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2504 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2507 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2509 * mips-dis.c (print_insn_mips16): Set insn_info information.
2510 (print_mips16_insn_arg): Likewise.
2512 * mips-dis.c (print_insn_mips16): Better handling of an extend
2513 opcode followed by an instruction which can not be extended.
2515 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2517 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2518 coldfire moveb instruction to not allow an address register as
2519 destination. Although the documentation does not indicate that
2520 this is invalid, experiments uncovered unexpected behavior.
2521 Added a comment explaining the situation. Thanks to Andreas
2522 Schwab for pointing this out to me.
2524 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2526 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2527 entries are presorted so that entries with the same mnemonic are
2528 adjacent to each other in the table. Sort the entries for each
2529 instruction so that this is true.
2531 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2533 * m68k-dis.c: Include <libiberty.h>.
2534 (print_insn_m68k): Sort the opcode table on the most significant
2535 nibble of the opcode.
2537 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2539 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2540 "vsub", "vst", "xnor", and "xor" instructions.
2541 (V_a1): Renamed from V_a, msb of accumulator reg number.
2542 (V_a0): Add macro, lsb of accumulator reg number.
2544 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2546 * tic80-dis.c (print_insn_tic80): Broke excessively long
2547 function up into several smaller ones and arranged for
2548 the instruction printing function to be callable recursively
2549 to print vector instructions that have both a load and a
2550 math instruction packed into a single opcode.
2551 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2552 to explain why it comes after the other vector opcodes.
2554 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2556 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2557 move insns to handle immediate operands.
2559 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2561 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2562 fix operand mask in the "moveml" entries for the coldfire.
2564 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2566 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2567 New macros for building vector instruction opcodes.
2568 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2569 FMT_LI, which were unused. The field is now a flags field.
2570 Remove some opcodes that are possible, but illegal, such
2571 as long immediate instructions with doubles for immediate
2572 values. Add "vadd" and "vld" instructions.
2574 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2576 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2577 the order more logical. Move the shift alias instructions ("rotl",
2578 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2579 interspersed with the regular sr.x and sl.x instructions. Add
2580 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2581 "sub", "subu", "swcr", and "trap".
2583 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2585 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2586 (OFF_SL_PC): Renamed from OFF_SL.
2587 (OFF_SS_BR): New operand type for base relative operand.
2588 (OFF_SL_BR): New operand type for base relative operand.
2589 (REG_BASE): New operand type for base register operand.
2590 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2591 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2592 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2594 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2595 10 char field, padded with spaces on rhs, rather than a string
2596 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2597 than old TIC80_OPERAND_RELATIVE. Add support for new
2598 TIC80_OPERAND_BASEREL flag bit.
2600 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2602 * tic80-dis.c (print_insn_tic80): Print floating point operands
2604 * tic80-opc.c (SPFI): Add single precision floating point
2605 immediate operand type.
2606 (ROTATE): Add rotate operand type for shifts.
2607 (ENDMASK): Add for shifts.
2608 (n): Macro for the 'n' bit.
2609 (i): Macro for the 'i' bit.
2610 (PD): Macro for the 'PD' field.
2611 (P2): Macro for the 'P2' field.
2612 (P1): Macro for the 'P1' field.
2613 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2616 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2618 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2619 adding in current address for pc-relative operands.
2621 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2623 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2624 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2625 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2626 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2627 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2628 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2629 (REG_SCALED, LSI_SCALED): New operand types.
2630 (E): New macro for 'E' bit at bit 27.
2631 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2632 opcodes, including the various size flavors (b,h,w,d) for
2633 the direct load and store instructions.
2635 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2637 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2639 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2640 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2641 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2642 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2643 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2644 masks with "MASK_* & ~M_*" to get the M bit reset.
2645 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2647 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2649 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2650 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2651 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2653 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2654 CC, SICR, and LICR table entries.
2655 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2656 "bcnd", and "brcr" opcodes.
2658 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2660 * ppc-opc.c (powerpc_operands): Make comment match the
2661 actual fields (no shift field).
2662 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2663 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2664 partial implementation, work in progress.
2665 * tic80-opc.c (tic80_operands): Begin construction operands table.
2666 (tic80_opcodes): Continue populating opcodes table and start
2667 filling in the operand indices.
2668 (tic80_num_opcodes): Add this.
2670 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2672 * m68k-opc.c: Add #B case for moveq.
2674 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2676 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2677 before they are used.
2679 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2681 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2682 for "breakpoint" instruction.
2684 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2686 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2687 (dep): Use ALL_CFLAGS rather than CFLAGS.
2689 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2691 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2694 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2696 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2697 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2699 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2701 * mips16-opc.c: Add "abs".
2703 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2705 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2706 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2707 (disassembler): Add bfd_arch_tic80 support to set disassemble
2708 to print_insn_tic80.
2709 * tic80-dis.c (print_insn_tic80): Add stub.
2711 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2713 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2714 * configure: Regenerate with autoconf.
2715 * tic80-dis.c: Add file.
2716 * tic80-opc.c: Add file.
2718 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2720 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2722 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2724 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2725 (mn10200_opcodes): Use it for some logicals and btst insns.
2726 Add "break" and "trap" instructions.
2728 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2730 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2732 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2734 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2735 relative load or add now depends upon whether the instruction is
2738 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2740 * mn10200-dis.c: Finish writing disassembler.
2741 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2742 Fix mask for "jmp (an)".
2744 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2745 handle endianness issues for mn10300.
2747 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2749 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2751 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2752 instruction. Fix opcode field for "movb (imm24),dn".
2754 * mn10200-opc.c (mn10200_operands): Fix insertion position
2757 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2759 * mn10200-opc.c: Create mn10200 opcode table.
2760 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2761 but moving along nicely.
2763 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2765 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2767 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2769 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2770 specifiers for fmovem* instructions.
2772 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2774 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2776 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2778 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2781 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2783 * mn10300-opc.c: Add some comments explaining the various
2786 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2788 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2790 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2793 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2794 operand specifiers in fmovm* instructions.
2796 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2798 * ppc-opc.c (insert_li): Give an error if the offset has the two
2799 least significant bits set.
2801 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2803 * mips-dis.c (print_insn_mips16): Separate the instruction from
2804 the arguments with a tab, not a space.
2806 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2808 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2811 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2814 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2816 * configure: Rebuild with autoconf 2.12.
2818 Add support for mips16 (16 bit MIPS implementation):
2819 * mips16-opc.c: New file.
2820 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2821 (mips16_reg_names): New static array.
2822 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2823 after seeing a 16 bit symbol.
2824 (print_insn_little_mips): Likewise.
2825 (print_insn_mips16): New static function.
2826 (print_mips16_insn_arg): New static function.
2827 * mips-opc.c: Add jalx instruction.
2828 * Makefile.in (mips16-opc.o): New target.
2829 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2830 * configure: Rebuild.
2832 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2834 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2835 operand specifiers in *save, *restore and movem* instructions.
2837 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2840 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2841 register operands for immediate arithmetic, not, neg, negx, and
2842 set according to condition instructions.
2844 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2845 specifier of the effective-address operand in immediate forms of
2846 arithmetic instructions. The specifier for the immediate operand
2847 notes how and where the constant will be stored.
2849 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2851 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2854 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2857 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2859 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2861 * mn10300-dis.c (disassemble): Handle register lists.
2863 * mn10300-opc.c: Fix handling of register list operand for
2864 "call", "ret", and "rets" instructions.
2866 * mn10300-dis.c (disassemble): Print PC-relative and memory
2867 addresses symbolically if possible.
2868 * mn10300-opc.c: Distinguish between absolute memory addresses,
2869 pc-relative offsets & random immediates.
2871 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2873 (disassemble): Handle SPLIT and EXTENDED operands.
2875 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2877 * mn10300-dis.c: Rough cut at printing some operands.
2879 * mn10300-dis.c: Start working on disassembler support.
2880 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2882 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2884 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2886 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2888 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2890 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2892 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2893 register argument is calls and jmp instructions.
2895 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2897 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2898 getx operand. Fix opcode for mulqu imm,dn.
2900 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2902 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2903 in MN10300_OPERAND_SPLIT operands for how many bits
2904 appear in the basic insn word. Add IMM32_HIGH24,
2905 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2906 (mn10300_opcodes): Use new operands as needed.
2908 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2909 for bset, bclr, btst instructions.
2910 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2912 * mn10300-opc.c (mn10300_operands): Remove many redundant
2913 operands. Update opcode table as appropriate.
2914 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2915 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2917 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2919 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2920 operands (for indexed load/stores). Fix bitpos for DI
2921 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2922 few instructions that insert immediates/displacements in the
2923 middle of the instruction. Add IMM8E for 8 bit immediate in
2924 the extended part of an instruction.
2925 (mn10300_operands): Use new opcodes as appropriate.
2927 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2929 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2930 sequential so the assembler never parallelizes it with
2933 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2935 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2936 a data/address register that appears in register field 0
2937 and register field 1.
2938 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2940 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2942 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2943 standard disassembly.
2945 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2946 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2947 Recategorize PALcode instructions.
2949 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2951 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2953 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2955 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2956 there are no operand types.
2958 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2960 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2962 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2964 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2966 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2968 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2970 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2971 and sst.w instructions.
2973 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2976 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2978 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2981 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2983 * ppc-opc.c (PPCPWR2): Define.
2984 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2987 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2989 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2990 field for movhu instruction.
2992 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2993 cast value to "long" not "signed long" to keep hpux10
2996 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2998 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3001 * mn10300-opc.c (FMT*): Remove definitions.
3003 * mn10300-opc.c (mn10300_opcodes): Fix destination register
3004 for shift-by-register opcodes.
3006 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3007 into [AD][MN][01] for encoding the position of the register
3010 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
3012 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3013 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3015 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
3017 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3018 Fix various typos. Add "PAREN" operand.
3019 (MEM, MEM2): Define.
3020 (mn10300_opcodes): Surround all memory addresses with "PAREN"
3021 operands. Fix several typos.
3023 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3026 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
3028 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3029 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3031 (mn10300_opcodes): Break opcode format out into its own field.
3032 Update many operand fields to deal with signed vs unsigned
3033 issues. Fix one or two typos in the "mov" instruction
3034 opcode, mask and/or operand fields.
3036 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3038 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3039 m68851 wasn't reset.
3041 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3043 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3044 all opcodes. Very rough cut at operands for all opcodes.
3046 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3049 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3051 * mn10200-opc.c, mn10300-opc.c: New files.
3052 * mn10200-dis.c, mn10300-dis.c: New files.
3053 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3054 * disassemble.c: Break mn10x00 support into 10200 and 10300
3056 * configure.in: Likewise.
3057 * configure: Rebuilt.
3059 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3061 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3063 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3065 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3067 * disassemble (ARCH_mn10x00): Define.
3068 (disassembler): Handle bfd_arch_mn10x00.
3069 * configure.in: Recognize bfd_mn10x00_arch.
3070 * configure: Rebuilt.
3072 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3074 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3075 accordingly. Don't declare functions using op_rtn.
3077 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3079 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3080 params to be more standard.
3081 * (disassemble): Print absolute addresses and symbolic names for
3082 branch and jump targets.
3083 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3085 * (v850_opcodes): Add breakpoint insn.
3087 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3089 * m68k-opc.c: Move the fmovemx data register cases before the
3090 other cases, so that they get recognized before the data register
3091 does gets treated as a degenerate register list.
3093 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3095 * mips-opc.c: Add a case for "div" and "divu" with two registers
3096 and a destination of $0.
3098 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3100 * mips-dis.c (print_insn_arg): Add prototype.
3101 (_print_insn_mips): Ditto.
3103 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3105 * mips-dis.c (print_insn_arg): Print condition code registers as
3108 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3110 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3112 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3114 * v850-dis.c (disassemble): Make static. Provide prototype.
3116 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3118 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3121 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3123 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3124 ']' characters into the output stream.
3125 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3126 Add "memop" field to all opcodes (for the disassembler).
3127 Reorder opcodes so that "nop" comes before "mov" and "jr"
3128 comes before "jarl".
3130 * v850-dis.c (print_insn_v850): Fix typo in last change.
3132 * v850-dis.c (print_insn_v850): Properly handle disassembling
3133 a two byte insn at the end of a memory region when the memory
3134 region's size is only two byte aligned.
3136 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3138 * v850-dis.c (v850_reg_names): Define.
3139 (v850_sreg_names, v850_cc_names): Likewise.
3140 (disassemble): Very rough cut at printing operands (unformatted).
3142 * v850-opc.c (BOP_MASK): Fix.
3143 (v850_opcodes): Fix mask for jarl and jr.
3145 * v850-dis.c: New file. Skeleton for disassembler support.
3146 * Makefile.in Remove v850 references, they're not needed here.
3147 * configure.in: Add v850-dis.o when building v850 toolchains.
3148 * configure: Rebuilt.
3149 * disassemble.c (disassembler): Call v850 disassembler.
3151 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3152 (insert_d8_6, extract_d8_6): New functions.
3153 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3154 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3156 (IF4A, IF4B): Use "D7" instead of "D7S".
3157 (IF4C, IF4D): Use "D8_7" instead of "D8".
3158 (IF4E, IF4F): New. Use "D8_6".
3159 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3160 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3162 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3163 (v850_operands): Change D16 to D16_15, use special insert/extract
3164 routines. New new D16 that uses the generic insert/extract code.
3165 (IF7A, IF7B): Use D16_15.
3166 (IF7C, IF7D): New. Use D16.
3167 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3169 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3170 message. Issue an error if the branch offset is odd.
3172 * v850-opc.c: Add notes about needing special insert/extract
3173 for all the load/store insns, except "ld.b" and "st.b".
3175 * v850-opc.c (insert_d22, extract_d22): New functions.
3176 (v850_operands): Use insert_d22 and extract_d22 for
3178 (insert_d9): Fix range check.
3180 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3182 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3183 and set bits field to D9 and D22 operands.
3185 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3187 * v850-opc.c (v850_operands): Define SR2 operand.
3188 (v850_opcodes): "ldsr" uses R1,SR2.
3190 * v850-opc.c (v850_opcodes): Fix opcode specs for
3191 sld.w, sst.b, sst.h, sst.w, and nop.
3193 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3195 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3196 end of the opcode table.
3198 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3200 * d10v-opc.c (pre_defined_registers): Added register pairs,
3201 "r0-r1", "r2-r3", etc.
3203 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3205 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3206 Create I16U for an unsigned 16bit mmediate operand.
3207 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3209 * v850-opc.c (v850_operands): Define EP operand.
3210 (IF4A, IF4B, IF4C, IF4D): Use EP.
3212 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3213 with immediate operand, "movhi". Tweak "ldsr".
3215 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3216 correct. Get sld.[bhw] and sst.[bhw] closer.
3218 * v850-opc.c (v850_operands): "not" is a two byte insn
3220 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3222 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3224 * v850-opc.c (two): Get order of words correct.
3226 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3228 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3229 register source and destination operands.
3230 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3232 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3233 same thinko in "trap" opcode.
3235 * v850-opc.c (v850_opcodes): Add initializer for size field
3238 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3239 Add D8 for 8-bit unsigned field in short load/store insns.
3240 (IF4A, IF4D): These both need two registers.
3241 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3242 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3243 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3244 for "ldsr" and "stsr".
3245 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3248 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3249 short store word (sst.w).
3251 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3253 * v850-opc.c (v850_operands): Added insert and extract fields,
3254 pointers to functions that handle unusual operand encodings.
3256 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3258 * v850-opc.c (v850_opcodes): Enable "trap".
3260 * v850-opc.c (v850_opcodes): Fix order of displacement
3261 and register for "set1", "clr1", "not1", and "tst1".
3263 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3265 * v850-opc.c (v850_operands): Add "B3" support.
3266 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3269 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3271 * v850-opc.c: Close unterminated comment.
3273 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3275 * v850-opc.c (v850_operands): Add flags field.
3276 (v850_opcodes): add move opcodes.
3278 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3280 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3281 * configure: (bfd_v850v_arch) Add new case.
3282 * configure.in: (bfd_v850_arch) Add new case.
3283 * v850-opc.c: New file.
3285 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3287 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3289 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3291 * d10v-opc.c: Add additional information to the opcode
3292 table to help determinine which instructions can be done
3295 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3297 * mpw-make.sed: Update editing of include pathnames to be
3300 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3302 * arm-opc.h: Added "bx" instruction definition.
3304 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3306 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3308 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3310 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3312 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3314 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3316 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3318 * makefile.vms: Update for alpha-opc changes.
3320 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3322 * i386-dis.c (print_insn_i386): Actually return the correct value.
3323 (ONE, OP_ONE): #ifdef out; not used.
3325 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3327 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3328 Changed subi operand type to treat 0 as 16.
3330 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3332 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3335 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3337 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3338 memory transfer instructions. Add new format string entries %h and %s.
3339 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3342 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3344 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3345 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3347 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3349 * alpha-dis.c (print_insn_alpha_osf): Remove.
3350 (print_insn_alpha_vms): Remove.
3351 (print_insn_alpha): Make globally visible. Chose the register
3352 names based on info->flavour.
3353 * disassemble.c: Always return print_insn_alpha for the alpha.
3355 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3357 * d10v-dis.c (dis_long): Handle unknown opcodes.
3359 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3361 * d10v-opc.c: Changes to support signed and unsigned numbers.
3362 All instructions with the same name that have long and short forms
3363 now end in ".l" or ".s". Divs added.
3364 * d10v-dis.c: Changes to support signed and unsigned numbers.
3366 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3368 * d10v-dis.c: Change all functions to use info->print_address_func.
3370 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3372 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3373 move ccr/sr insns more strict so that the disassembler only
3374 selects them when the addressing mode is data register.
3376 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3377 * d10v-opc.c (pre_defined_registers): Declare.
3378 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3379 to pick a better name for the registers.
3381 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3383 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3384 operands for fexpand and fpmerge. From Christian Kuehnke
3385 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3387 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3389 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3390 print routine. Take new regnames and cpumask arguments.
3391 Kill the environment variable nonsense.
3392 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3393 (print_insn_alpha_vms): New function. Do VMS style regnames.
3394 * disassemble.c (disassembler): Test bfd flavour to pick
3395 between OSF and VMS routines. Default to OSF.
3397 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3399 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3400 * configure: Rebuild.
3401 * Makefile.in (install): Use @INSTALL_SHLIB@.
3403 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3405 * configure: (bfd_d10v_arch) Add new case.
3406 * configure.in: (bfd_d10v_arch) Add new case.
3407 * d10v-dis.c: New file.
3408 * d10v-opc.c: New file.
3409 * disassemble.c (disassembler) Add entry for d10v.
3411 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3413 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3414 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3416 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3418 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3419 distinguish between variants of the instruction set.
3420 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3421 distinguish between variants of the instruction set.
3423 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3425 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3426 the 8086 instruction set.
3427 * i386-dis.c: General cleanups. Make most things static. Add
3428 prototypes. Get rid of static variables aflags and dflags. Pass
3429 them as args (to almost everything).
3431 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3433 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3435 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3437 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3438 if the next arg is marked with SRC_IN_DST. Gross.
3440 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3441 we're looking for and find EXR.
3443 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3444 if we're looking for KBIT and we don't find it.
3446 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3449 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3450 3bit immediate operands.
3452 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3454 * Released binutils 2.7.
3456 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3457 <kkaempf@progis.ac-net.de>.
3459 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3461 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3463 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3465 * sparc-dis.c (print_insn_sparclite): New routine to print
3466 sparclite instructions.
3468 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3470 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3472 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3474 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3475 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3476 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3478 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3480 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3481 Use autoconf-set values.
3482 (docdir, oldincludedir): Removed.
3483 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3485 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3487 * alpha-opc.c: New file.
3488 * alpha-opc.h: Remove.
3489 * alpha-dis.c: Complete rewrite to use new opcode table.
3490 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3491 * configure: Rebuild with autoconf 2.10.
3492 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3493 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3495 (alpha-opc.o): New target.
3497 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3499 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3500 Set imm_added_to_rs1 even if the source and destination register
3503 * sparc-opc.c: Add some two operand forms of the wr instruction.
3505 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3507 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3510 * disassemble.c (disassembler): Handle H8/S.
3511 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3513 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3515 * sparc-opc.c: Add beq/teq as aliases for be/te.
3517 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3518 <sergei@msil.sps.mot.com>.
3520 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3522 * makefile.vms: New file.
3524 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3526 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3528 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3531 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3533 * i386-dis.c (OP_OFF): Call append_prefix.
3535 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3537 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3538 unsigned long to silence a warning from the Solaris PowerPC
3541 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3543 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3545 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3547 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3549 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3550 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3551 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3552 cpush, cpusha, cpull sparclet insns.
3554 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3556 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3558 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3560 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3561 Set F_FLOAT on other floating point instructions.
3563 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3565 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3567 (powerpc_opcodes): Add 860/821 specific SPRs.
3569 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3571 * configure.in: Permit --enable-shared to specify a list of
3572 directories. Set and substitute BFD_PICLIST.
3573 * configure: Rebuild.
3574 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3575 uses. Set to @BFD_PICLIST@.
3577 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3579 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3580 not "abs", which may be needed for the absolute in something
3581 like btst #0,@10:8. Print L_3 immediates separately from other
3582 immediates. Change ABSMOV reference to ABS8MEM.
3584 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3586 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3587 (current_arch_mask): New static global.
3588 (compute_arch_mask): New static function.
3589 (print_insn_sparc): Delete sparc_v9_p. New static local
3590 current_mach. Resort opcode table if current_mach changes.
3591 Generalize "insn not supported" test.
3592 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3593 Delete test for v9/!v9.
3594 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3596 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3597 (brfcx): Renamed to FBRX.
3598 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3599 coprocessor mnemonics are not supported on the sparclet).
3600 (condf): Renamed to CONDF.
3601 (SLCBCC2): Delete F_ALIAS flag.
3603 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3605 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3606 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3608 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3610 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3611 that the shared library version number is set correctly.
3613 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3615 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3616 Miles Bader <miles@gnu.ai.mit.edu>.
3617 * configure: Rebuild.
3619 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3621 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3624 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3626 * configure: Rebuild with autoconf 2.8.
3628 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3630 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3631 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3633 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3635 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3636 since they appear as targets in Makefile.in.
3637 * configure: Rebuild.
3639 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3641 * mpw-make.sed: Edit out shared library support bits.
3643 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3645 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3646 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3647 (sparc_opcodes): Add sparclet insns.
3648 (sparclet_cpreg_table): New static local.
3649 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3650 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3652 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3654 * i386-dis.c (index16): New static variable.
3655 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3657 (OP_indirE): Return result of OP_E.
3658 (OP_E): Check for 16 bit addressing mode, and disassemble
3659 correctly. Optimised 32 bit case a little. Don't print
3660 "(base,index,scale)" when sib specifies only an offset.
3662 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3664 * configure.in: Set and substitute SHLIB_DEP.
3665 * configure: Rebuild.
3666 * Makefile.in (SHLIB_DEP): New variable.
3667 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3668 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3669 COMMON_SHLIB, add them to piclist with appropriate modifications.
3670 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3671 here: just use piclist.
3673 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3675 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3676 (print_insn_sparc): Rewrite v9/not-v9 tests.
3677 (compare_opcodes): Likewise.
3678 * sparc-opc.c (MASK_<ARCH>): Define.
3679 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3680 (sparclet,v6notv9): Define.
3681 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3682 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3684 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3686 * configure.in: Call AC_PROG_CC before configure.host.
3687 * configure: Rebuild.
3689 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3691 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3693 * i386-dis.c (onebyte_has_modrm): New static array.
3694 (twobyte_has_modrm): New static array.
3695 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3697 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3699 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3702 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3704 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3707 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3709 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3710 m68010up, not just m68020up | cpu32.
3712 * Makefile.in (SONAME): New variable.
3713 ($(SHLINK)): Make a link to the transformed name, as well.
3714 (stamp-tshlink): New target.
3715 (install): Skip stamp-tshlink during install.
3717 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3719 * configure.in: Call AC_ARG_PROGRAM.
3720 * configure: Rebuild.
3721 * Makefile.in (program_transform_name): New variable.
3722 (install): Transform library name before installing it.
3724 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3726 * i960-dis.c (mem): Add HX dcinva instruction.
3728 Support for building as a shared library, based on patches from
3729 Alan Modra <alan@spri.levels.unisa.edu.au>:
3730 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3731 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3732 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3733 * configure: Rebuild.
3734 * Makefile.in (ALLLIBS): New variable.
3735 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3736 (COMMON_SHLIB, SHLINK): New variables.
3737 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3738 (STAGESTUFF): Remove variable.
3739 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3740 (stamp-piclist, piclist): New targets.
3741 ($(SHLIB), $(SHLINK)): New targets.
3742 ($(OFILES)): Depend upon stamp-picdir.
3743 (disassemble.o): Build twice if PICFLAG is set.
3744 (MOSTLYCLEAN): Add pic/*.o.
3745 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3746 (distclean): Remove pic and stamp-picdir.
3747 (install): Install shared libraries.
3748 (stamp-picdir): New target.
3750 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3752 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3753 Print unknown instruction as "unknown", rather than in hex.
3755 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3757 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3759 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3761 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3763 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3765 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3766 when necessary. From Ulrich Drepper
3767 <drepper@myware.rz.uni-karlsruhe.de>.
3769 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3771 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3772 sparc_num_opcodes. Update architecture enum values.
3773 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3774 (sparc_opcode_lookup_arch): New function.
3775 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3776 (sparc_opcodes): Add v9a shutdown insn.
3778 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3780 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3781 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3783 (print_insn_sparc64): Deleted.
3784 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3787 * sparc-opc.c (architecture_pname): Add v9a.
3789 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3791 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3792 incorrectly defined as 0x16 when it should be 0x15.
3793 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3794 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3795 excb (exception barrier) which is defined in the Alpha
3796 Architecture Handbook version 2.
3797 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3798 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3799 disassembled as or, for example.
3801 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3803 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3804 (_print_insn_mips): Change i from int to unsigned int.
3806 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3808 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3809 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3811 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3813 * i386-dis.c: Added Pentium Pro instructions.
3815 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3817 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3820 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3822 * sh-opc.h (sh_nibble_type): Added REG_B.
3823 (sh_arg_type): Added A_REG_B.
3824 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3826 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3828 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3830 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3832 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3834 * Makefile.in (distclean): Remove stamp-h. From Ronald
3835 F. Guilmette <rfg@monkeys.com>.
3837 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3839 From David Mosberger-Tang <davidm@azstarnet.com>:
3840 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3843 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3845 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3846 (sh_table): Added many SH3 opcodes.
3847 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3849 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3851 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3852 (subco,subco.): Mark this PPC, not PPCCOM.
3854 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3856 * configure: Rebuild with autoconf 2.7.
3858 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3860 * configure: Rebuild with autoconf 2.6.
3862 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3864 * configure.in: Sort list of architectures. Accept but do nothing
3865 for alliant, convex, pyramid, romp, and tahoe.
3867 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3869 * a29k-dis.c (print_special): Change num to unsigned int.
3871 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3873 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3876 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3878 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3879 * configure: Rebuilt.
3881 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3883 * configure.in: Add case for bfd_i860_arch.
3884 * configure: Rebuild.
3886 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3888 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3889 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3890 (NEXTDOUBLE): Likewise.
3891 (print_insn_m68k): Don't match fmoveml if there is more than one
3892 register in the list.
3893 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3895 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3897 * m68k-opc.c: Use #W rather than #w.
3898 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3900 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3902 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3903 and likewise for all the dbxx opcodes.
3905 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3907 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3909 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3911 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3912 the VR4100 specific instructions to the mips_opcodes structure.
3914 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3916 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3917 ugly Metrowerks bug in CW6, is fixed in CW7.
3919 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3921 * ppc-opc.c (whole file): Add flags for common/any support.
3923 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3925 * Makefile.in (BISON): Remove macro.
3926 (FLAGS_TO_PASS): Remove BISON.
3928 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3930 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3932 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3933 instructions that take no args by looking at the match mask.
3934 (print_insn_arg): Always print "%" before register names.
3935 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3936 [case '_']: Don't print "@#" before address.
3937 [case 'J']: Use "%s" as format string, not register name.
3938 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3940 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3942 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3945 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3947 From David Mosberger-Tang <davidm@azstarnet.com>
3949 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3950 (alpha_insn_set): added definitions for VAX floating point
3951 instructions (Unix compilers don't generate these, but handcoded
3952 assembly might still use them).
3954 * alpha-dis.c (print_insn_alpha): added support for disassembling
3955 the miscellaneous instructions in the Alpha instruction set.
3957 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3959 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3960 no longer create sysdep.h, sed ppc-opc.c to work around a
3961 serious Metrowerks C bug.
3962 * mpw-make.in: Remove.
3963 * mpw-make.sed: New file, used by mpw-configure to edit
3964 Makefile.in into an MPW makefile.
3966 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3968 * Makefile.in (maintainer-clean): New synonym for realclean.
3970 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3972 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3973 which use '0', '1', and '2' instead. Specify the proper size for
3974 a pmove immediate operand. Correct the pmovefd patterns to be
3975 moves to a register, not from a register.
3976 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3978 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3980 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3981 %psr, %wim, %tbr as F_NOTV9.
3983 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3985 * Makefile.in (Makefile): Just rebuild Makefile when running
3987 (config.h, stamp-h): New targets.
3988 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3989 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3990 rebuilding config.h.
3991 * configure: Rebuild.
3993 * mips-opc.c: Change unaligned loads and stores with "t,A"
3994 operands to use "t,A(b)".
3996 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3998 * sh-dis.c (print_insn_shx): Add F_FR0 support.
4000 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4002 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4003 until 3 instead of until 2.
4005 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
4007 * Makefile.in (ALL_CFLAGS): Define.
4008 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4009 (MOSTLYCLEAN): Add config.log.
4010 (distclean): Don't remove config.log.
4011 * configure.in: Substitute HDEFINES.
4012 * configure: Rebuild.
4014 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4016 * sh-opc.h (sh_arg_type): Add F_FR0.
4017 (sh_table, case fmac): Add F_FR0 as first argument.
4019 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4021 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4023 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
4025 * sparc-dis.c: Remove all references to NO_V9.
4027 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4029 * aclocal.m4: Just include ../bfd/aclocal.m4.
4030 * configure: Rebuild.
4032 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4034 * sparc-dis.c (X_DISP19): Define.
4035 (print_insn, case 'G'): Use it.
4036 (print_insn, case 'L'): Sign extend displacement.
4038 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4040 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4041 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4042 host_makefile_frag or frags.
4043 * aclocal.m4: New file.
4044 * configure: Rebuild.
4045 * Makefile.in (INSTALL): Set to @INSTALL@.
4046 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4047 (INSTALL_DATA): Set to @INSTALL_DATA@.
4049 (AR_FLAGS): Set to rc rather than qc.
4050 (CC): Define as @CC@.
4051 (CFLAGS): Set to @CFLAGS@.
4052 (@host_makefile_frag@): Remove.
4053 (config.status): Remove dependency upon @frags@.
4055 * configure.in: ../bfd/config.bfd now just sets shell variables.
4056 Use them rather than looking through target Makefile fragments.
4057 * configure: Rebuild.
4059 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4061 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4063 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4065 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4066 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4069 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4070 (lookup_{name,value}): New functions.
4071 (prefetch_table): New static local.
4072 (sparc_{encode,decode}_prefetch): New functions.
4073 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4075 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4077 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4080 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4082 * sh-dis.c: Correct comment on first line of file.
4084 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4086 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4088 * sparc-opc.c (asi, membar): New static locals.
4089 (sparc_{encode,decode}_{asi,membar}): New functions.
4090 (sparc_opcodes, membar insn): Fix.
4091 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4092 Support decoding of membar masks.
4095 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4097 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4099 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4101 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4102 and likewise for the other branches. Add bhs as an alias for bcc,
4103 and likewise for the size variants. Add dbhs as an alias for
4106 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4108 * sh-opc.h (FP sts instructions): Update to match reality.
4110 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4112 * m68k-dis.c: (fpcr_names): Add % before all register names.
4113 (reg_names): Likewise.
4114 (print_insn_arg): Don't explicitly print % before register names.
4115 Add % before register names in static array names. In case 'r',
4116 print data registers as `@(Dn)', not `Dn@'. When printing a
4117 memory address, don't print @# before it.
4118 (print_indexed): Change base_disp and outer_disp from int to
4119 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4120 syntax. Sign extend 8 byte displacement correctly.
4121 (print_base): Print using MIT syntax. Print zpc when appropriate.
4122 Change parameter disp from int to bfd_vma.
4124 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4127 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4129 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4130 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4131 * sh-opc.h (sh_arg_type): Add new operand types.
4132 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4134 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4136 * Makefile.in (distclean): Remove generated file config.h.
4138 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4140 * Makefile.in (distclean): Remove generated file config.h.
4142 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4144 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4146 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4148 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4149 rather than numopcodes. Use m68k_opcodes rather than removed
4150 opcode function. Don't check F_ALIAS.
4151 (print_insn_arg): Change first parameter to be const char *.
4152 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4153 (m68k-opc.o): New target.
4154 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4155 * configure: Rebuild.
4157 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4159 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4160 (opcode_bits, opcode_hash_table): New variables.
4161 (opcodes_initialized): Renamed from opcodes_sorted.
4162 (build_hash_table): New function.
4163 (is_delayed_branch): Use hash table.
4164 (print_insn): Renamed from print_insn_sparc, made static.
4165 Build and use hash table. If !sparc64, ignore sparc64 insns,
4166 and vice-versa if sparc64.
4167 (print_insn_sparc, print_insn_sparc64): New functions.
4168 (compare_opcodes): Move sparc64 opcodes to end.
4169 Print commutative insns with constant second.
4170 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4172 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4174 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4175 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4176 avoids printing a delay slot in a delay slot.
4177 * sh-opc.h (sh_table): Fully bracket last entry.
4179 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4181 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4183 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4185 * configure.in: Get host_makefile_frag from ${srcdir}.
4187 * configure.in: Autoconfiscated. Check for string[s].h. Create
4188 config.h from config.in. Don't set up sysdep.h link.
4189 * sysdep.h: New file.
4190 * configure, config.in: New files, generated from configure.in.
4191 * Makefile.in: Updated to be processed autoconf-style.
4192 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4193 (Makefile): Depend on config.status.
4194 (config.status): New rule.
4195 * configure.bat: Update Makefile substitutions.
4197 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4199 * mips-opc.c (L1): Define.
4200 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4201 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4204 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4206 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4207 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4208 have multiple add units but only a single logical unit.
4210 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4211 shifted by 18, without any insertion or extraction function.
4212 (insert_cr, extract_cr): Remove.
4214 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4216 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4219 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4221 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4222 * sh-opc.h: Add copyright.
4224 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4226 * Makefile.in (crunch-m68k): Delete extra target accidentally
4227 checked in a while ago.
4229 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4231 * sh-opc.h (sh_table): Add SH3 support.
4233 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4235 * sh-opc.h: Added bsrf and braf.
4237 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4239 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4240 bogus [ls]fm{ea,fd} patterns.
4242 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4243 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4244 initialize it from memory. Make function static.
4245 (print_insn_{big,little}_arm): New functions.
4246 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4247 the correct endianness.
4249 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4251 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4254 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4256 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4257 17th, so that it builds again using GCC as the compiler.
4259 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4261 * mips-dis.c (print_insn_little_mips): Cast return value from
4262 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4263 expects an unsigned long, and that might be fewer words of
4264 argument storage (e.g., if bfd_vma is long long on a 32-bit
4266 (print_insn_big_mips): Likewise with bfd_getb32 value.
4267 (_print_insn_mips): Now static.
4269 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4271 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4272 gcc memory hog problem with initializer is fixed.
4274 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4276 Merge in support for Mac MPW as a host.
4277 (Old change descriptions retained for informational value.)
4279 * mpw-config.in (archname): Compute from the config.
4280 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4282 * mpw-config.in (target_arch): Compute from canonical target.
4283 (m68k, mips, powerpc, sparc): Add architectures.
4284 * mpw-make.in (disassemble.c.o): Add.
4285 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4287 * mpw-config.in (BFD_MACHINES): Set to a default value.
4288 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4290 * mpw-make.in (CSEARCH): Add extra-include to search path.
4292 * mpw-config.in (varargs.h): Don't create.
4293 (sysdep.h): Create using forward-include.
4294 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4296 * mpw-config.in: New file, MPW version of configure.in.
4297 * mpw-make.in: New file, MPW version of Makefile.in.
4299 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4301 * alpha-dis.c (print_insn_alpha): Put empty statement after
4304 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4306 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4307 (low_sign_extend): Likewise.
4308 (get_field): Delete unused function.
4309 (set_field, deposit_14, deposit_21): Likewise.
4311 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4313 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4316 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4318 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4320 * alpha-opc.h (OSF_ASMCODE): define
4321 print pal-code names as defined in App C of the
4322 Alpha Architecture Reference Manual
4324 * alpha-dis.c: cleaned up output
4325 print stylized code forms as defined in App A.4.3 of the
4326 Alpha Architecture Reference Manual
4328 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4330 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4332 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4335 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4337 * m68k-dis.c (opcode): New function. Returns address of opcode
4338 table entry given index, even if the opcode table was split to
4339 work around gcc bugs.
4340 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4342 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4343 (reg_names): Now const.
4344 (print_insn_arg): Arrays cacheFieldName and names now const.
4345 (print_indexed): Array scales now const.
4347 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4349 * ppc-opc.c: Sort recently added instructions by minor opcode
4350 number within major opcode number.
4352 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4354 * hppa-dis.c: Include libhppa.h.
4356 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4358 * mips-opc.c: Change dli to use M_DLI, and add dla.
4360 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4362 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4364 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4366 * mips-opc.c: Add r4650 mul instruction.
4368 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4370 * mips-opc.c: Add uld and usd macros for unaligned double load and
4373 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4375 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4376 mfdcr, mtdcr, icbt, iccci.
4378 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4380 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4381 signed char fields to shorts, more portable.
4383 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4385 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4386 char fields as signed chars, since they may have negative values.
4388 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4390 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4391 (mycroft@netbsd.org).
4393 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4395 From "Logg, Ed" <elogg@ea.com>:
4396 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4397 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4400 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4402 * ppc-opc.c: Changes based on patch from David Edelsohn
4403 <edelsohn@mhpcc.edu>.
4404 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4407 (insert_tbr): New static function.
4408 (extract_tbr): New static function.
4409 (XFXFXM_MASK, XFXM): Define.
4410 (XSPRBAT_MASK, XSPRG_MASK): Define.
4411 (powerpc_opcodes): Add instructions to access special registers by
4412 name. Add mtcr and mftbu.
4414 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4416 * mips-opc.c (P3): Define.
4417 (mips_opcodes): Add mad and madu.
4419 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4421 * configure.in: Add W65 support.
4422 * disassemble.c: Likewise.
4423 * w65-opc.h, w65-dis.c: New files.
4425 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4427 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4430 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4432 * mips-opc.c: Add dli as a synonym for li.
4434 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4436 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4437 print something for reserved opcode values, even if it won't
4440 * mips-dis.c (_print_insn_mips): When initializing, shift right
4441 and mask, to avoid sign extension problems on the Alpha.
4443 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4446 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4448 * sh-opc.h (mov.l gbr): Get direction right.
4449 * sh-dis.c (print_insn_shx): New function.
4450 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4451 print opcodes with right byte order.
4453 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4455 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4456 to avoid conflicts with getopt.
4458 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4460 * hppa-dis.c (print_insn_hppa): Read the instruction using
4461 bfd_getb32, so that it works on a little endian or 64 bit host.
4462 Remove unused local variable op.
4464 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4466 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4467 addu does not work correctly if -mips3.
4469 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4471 * a29k-dis.c (print_special): Add special register names defined
4472 on 29030, 29040 and 29050.
4473 (print_insn): Handle new operand type 'I'.
4475 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4477 * Makefile.in (INSTALL): Use top level install.sh script.
4479 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4481 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4482 that it works on a little endian host.
4484 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4486 * configure.in: Use ${config_shell} when running config.bfd.
4488 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4490 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4492 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4494 * a29k-dis.c (print_insn): Print the opcode.
4496 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4498 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4500 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4502 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4504 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4506 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4507 which store a value into memory.
4509 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4511 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4512 * arm-dis.c, arm-opc.h: New files.
4514 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4516 * Makefile.in (ns32k-dis.o): Add dependency.
4517 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4518 string, not as array of chars.
4520 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4522 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4524 * sparc-opc.c: Added sparclite extended FP operations, and
4525 versions of v9 impdep* instructions permitting specification of
4528 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4530 * i960-dis.c (reg_names): Now const.
4531 (struct sparse_tabent): New type, copied from array type in mem
4533 (ctrl): Local static array ctrl_tab now const.
4534 (cobr): Local static array cobr_tab now const.
4535 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4536 static variable mem_tab no longer explicitly initialized. Changed
4537 mem_init to const array of struct sparse_tabent.
4538 (reg): Local static variable reg_tab no longer explicitly
4539 initialized. Changed reg_init to const array of struct
4541 (ea): Local static array scale_tab now const.
4543 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4546 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4548 * configure.bat: the disassember needs to be enabled for
4549 "objdump -d" to work in djgpp.
4551 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4553 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4554 (invalid_float): Enabled general version, doesn't require running
4555 on ns32k host. Changed to take char* argument, and test for
4556 explicitly specified sizes, instead of using sizeof() on host CPU
4558 (INVALID_FLOAT): Cast first argument.
4559 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4560 list_P032, list_M032): Now const.
4561 (optlist, list_search): Made appropriate arguments now point to
4563 (print_insn_arg): Changed static array of one-character-string
4564 pointers into a static const array of characters; fixed sprintf
4565 statement accordingly.
4567 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4569 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4570 from distribution. A ns32k-dis.c from a previous distribution has
4571 been brought up to date and supports the new interface.
4573 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4575 * configure.in: add bfd_ns32k_arch target support.
4577 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4578 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4580 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4582 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4585 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4587 * h8300-dis.c, mips-dis.c: Don't use true and false.
4589 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4591 * configure.in: Change --with-targets to --enable-targets.
4593 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4595 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4596 opcodes to the first instruction with that opcode, to speed
4597 disassembly of large files. From ralphc@pyramid.com (Ralph
4600 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4602 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4604 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4606 * configure.bat: update to latest makefile.in
4608 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4610 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4611 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4612 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4613 slot insn is in a delay slot.
4614 * z8k-opc.h: (resflg): Fix patterns.
4615 * h8500-opc.h Fix CR insn patterns.
4617 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4619 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4620 "cmpl" before POWER versions, so that gas -many uses them.
4622 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4624 * disassemble.c: New file.
4625 * Makefile.in (OFILES): Add disassemble.o.
4626 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4627 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4628 binutils/configure.in.
4630 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4631 opcode being examined.
4633 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4635 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4636 (insert_ral, insert_ram, insert_ras): New functions.
4637 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4638 RAS for store with update.
4640 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4642 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4643 (edelsohn@npac.syr.edu).
4645 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4647 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4650 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4652 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4654 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4656 * ppc-opc.c (powerpc_operands): The signedp field has been
4657 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4658 instead. Add new operand SISIGNOPT.
4659 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4660 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4661 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4664 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4666 * i386-dis.c (struct private): Renamed to dis_private. `private'
4667 is a reserved word for dynix cc.
4669 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4671 * configure.in: Change error message to refer to bfd/config.bfd
4672 rather than bfd/configure.in.
4674 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4676 * ppc-opc.c: Define POWER2 as short alias flag.
4677 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4680 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4682 * i960-dis.c (print_insn_i960): Don't read a second word for
4683 opcodes 0, 1, 2 and 3.
4685 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4687 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4689 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4691 * m68881-ext.c: Removed; no longer used.
4692 * Makefile.in: Changed accordingly.
4694 * m68k-dis.c (ext_format_68881): Don't declare.
4695 (print_insn_m68k): If an instruction uses place 'i', it uses at
4696 least four fixed bytes.
4697 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4698 extended float, convert to double using floatformat_to_double, not
4699 ieee_extended_to_double, and fetch the data before converting it.
4701 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4703 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4704 davidj@ICSI.Berkeley.EDU (David Johnson).
4706 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4708 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4709 PowerPC uses bdnz[l][a].
4711 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4713 * dis-buf.c, i386-dis.c: Include sysdep.h.
4715 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4717 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4719 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4720 by Motorola PowerPC 601 with PPC_OPCODE_601.
4721 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4722 Disassemble Motorola PowerPC 601 instructions as well as normal
4723 PowerPC instructions.
4725 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4727 * i960-dis.c (reg, mem): Just use a static array instead of
4730 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4732 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4733 condition name index if this is for a negated condition.
4735 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4736 Floating point format for 'H' operand is backwards from normal
4737 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4738 operands (fmpyadd and fmpysub), handle bizarre register
4739 translation correctly for single precision format.
4741 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4742 or 'I' operands if the next format specifier is 'M' (fcmp
4743 condition completer).
4745 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4747 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4748 single number giving a bitmask for the MB and ME fields of an M
4749 form instruction. Change NB to accept 32, and turn it into 0;
4750 also turn 0 into 32 when disassembling. Seperated SH from NB.
4751 (insert_mbe, extract_mbe): New functions.
4752 (insert_nb, extract_nb): New functions.
4753 (SC_MASK): Mask out SA and LK bits.
4754 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4755 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4756 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4757 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4758 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4759 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4760 (powerpc_macros): Define table of macro definitions.
4761 (powerpc_num_macros): Define.
4763 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4764 if PPC_OPERAND_NEXT is set.
4766 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4768 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4769 char. Retrieve contents using bfd_getl32 instead of shifting.
4771 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4773 * ppc-opc.c: New file. Opcode table for PowerPC, including
4774 opcodes for POWER (RS/6000).
4775 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4776 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4777 (CFILES): Add ppc-dis.c.
4778 (ppc-dis.o, ppc-opc.o): New targets.
4779 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4781 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4783 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4784 No space before 'u', 'f', or 'N'.
4786 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4788 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4789 farther than we should.
4791 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4793 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4795 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4797 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4799 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4800 needs it, to prevent reading past the end of a section.
4802 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4804 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4805 Removed t,A case for la; always use t,A(b) case.
4807 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4809 From Ted Lemen <mellon@pepper.ncd.com>
4810 * mips-dis.c (print_insn_arg): Handle 'k'.
4811 * mips-opc.c: Make cache use k, not t.
4813 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4815 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4816 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4817 FLOAT_FORMAT_CODE to put out floating point register names.
4819 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4821 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4823 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4825 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4827 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4829 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4830 larger than 32. Moved dsxx32 variants first for disassembler.
4832 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4834 * z8kgen.c, z8k-opc.h: Add full lda information.
4836 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4838 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4839 movb instructions. Any necessary space will be emitted by
4840 the code to handle nullification completers.
4842 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4844 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4846 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4848 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4849 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4851 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4853 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4855 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4857 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4858 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4860 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4862 * m88k-dis.c (m88kdis): comment change. Remove space after
4864 (printop): handle new arg types DEC and XREG for m88110.
4866 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4868 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4869 type for absolute branch addresses. Delete special
4870 "ble" and "be" code in 'W' operand code.
4872 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4874 * mips-opc.c: Set hazard information correctly for branch
4875 likely instructions.
4877 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4879 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4880 info->fprintf_func for printing and info->print_address_func for
4883 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4885 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4887 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4889 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4890 Corrected second case of "b" for disassembler.
4892 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4894 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4895 to BFD swapping routines to correspond to BFD name changes.
4897 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4899 * mips-opc.c: Change div machine instruction to be z,s,t rather
4900 than s,t. Change div macro to be d,v,t rather than d,s,t.
4901 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4902 rem and remu which generates only the corresponding div
4903 instruction. This is for compatibility with the MIPS assembler,
4904 which only generates the simple machine instruction when an
4905 explicit destination of $0 is used.
4906 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4908 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4910 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4911 WR_31 hazard for bal, bgezal, bltzal.
4913 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4915 * hppa-dis.c (print_insn_hppa): Use print function
4916 from within the disassemble_info, not fprintf_filtered.
4918 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4920 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4921 Law, law@cs.utah.edu.)
4923 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4925 * mips-opc.c ("absu"): Removed.
4928 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4930 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4931 Changed hazard information to distinguish between memory load
4932 delays and coprocessor load delays.
4934 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4936 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4938 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4940 * configure.in: Don't pass cpu to config.bfd.
4942 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4944 * m88k-dis.c (m88kdis): Make class unsigned.
4946 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4948 * alpha-dis.c (print_insn_alpha): One branch format case was
4949 missing the instruction name.
4951 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4953 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4954 Add the arch-specific auxiliary files.
4955 (OFILES): Remove the arch-specific auxiliary files
4956 and use BFD_MACHINES instead of DIS_LIBS.
4957 * configure.in: Set BFD_MACHINES based on --with-targets option.
4959 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4961 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4964 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4966 * sparc-opc.c: Change CONST to const to deal with gcc
4967 -Dconst=__const -traditional.
4969 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4971 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4972 coprocessor instructions out of #if 0, and made them use new
4975 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4977 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4979 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4981 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4982 instruction, for use by the disassembler.
4984 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4985 hand-coded sign extensions that depended on 32-bit host ints.
4986 FIXME, we still depend on big-endian host bitfield ordering.
4987 (sparc_print_insn): Set the insn_info_valid field, and the
4988 other fields that describe the instruction being printed.
4990 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4992 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4993 `jmp' instead of just one of them.
4995 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4997 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4998 (fput_fp_reg_r): Renamed from fput_reg_r.
4999 (fput_fp_reg): New function.
5000 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5002 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5004 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5006 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5008 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5010 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5011 don't output a space.
5013 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5015 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
5017 * mips-opc.c: New file, containing opcode table from
5018 ../include/opcode/mips.h.
5019 * Makefile.in: Add it.
5021 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5023 * m88k-dis.c: New file, moved in from gdb and changed to use the
5024 new dis-asm.h disassembler interface.
5025 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5026 (m88k-dis.o): New target.
5028 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5030 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5031 argument string const char * to correspond to opcode/mips.h.
5033 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5035 * mips-dis.c: Updated to account for name changes in new version
5037 * Makefile.in: Added header file dependencies.
5039 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5041 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5043 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5045 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5046 extend, rather than shifts.
5048 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5050 * Makefile.in: Undo 15 June change.
5052 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5054 * m68k-dis.c (print_insn_arg): Change return value to byte count
5056 * m68k-dis.c: Re-write to detect invalid operands before
5057 printing anything, so we can handle this the same way we
5058 handle invalid opcodes.
5060 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5062 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5064 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5066 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5069 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5071 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5073 * configure.in: Do make sysdep.h link.
5074 * Makefile.in: Search ../include. Don't search ../bfd.
5076 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5078 Changes from Jeff Law, law@cs.utah.edu:
5079 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5080 Do not print a space before the completers specified by
5083 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5085 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5086 defined, since gdb has been fixed.
5088 Changes from Jeff Law, law@cs.utah.edu:
5089 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5090 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5091 be a *disassemble_info, not a *FILE.
5092 * hppa-dis.c: Support 'd', '!', and 'a'.
5093 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5094 * hppa-dis.c: Delete cases which are no longer needed.
5096 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5098 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5100 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5102 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5105 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5107 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5108 * configure.in: No longer need to configure to get sysdep.h.
5110 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5112 * Patches from Jeffrey Law <law@cs.utah.edu>.
5113 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5114 templates for 1.1 FP computational instructions.
5116 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5118 * h8500-dis.c (print_insn_h8500): Address argument is type
5120 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5123 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5124 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5126 * sparc-dis.c (compare_opcodes): Move static declaration to
5129 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5131 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5132 instruction, remove unimp hack from 'l' argument.
5134 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5136 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5139 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5141 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5142 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5145 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5147 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5148 arrays of string pointers to 2-d arrays of chars, to save
5151 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5153 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5154 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5156 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5158 * hppa-dis.c: New file from Utah, adapted to new disassembler
5160 * Makefile.in: Include it.
5162 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5164 * sh-dis.c, sh-opc.h: New files.
5166 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5168 * alpha-dis.c, alpha-opc.h: New files.
5170 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5172 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5175 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5177 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5179 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5181 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5184 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5186 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5187 and double percent signs a few places.
5189 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5191 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5192 Use info->print_address_func not print_address.
5194 * dis-buf.c (generic_print_address): New function.
5196 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5198 * Makefile.in: Add sparc-dis.c.
5199 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5201 Add `add' instruction to the set that get checked
5202 for a preceding `sethi' in order to print an absolute address.
5203 * (print_insn): Disassembly prefers real instructions.
5204 (is_delayed_branch): Speed up.
5205 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5206 Still missing some float ops, and needs testing.
5207 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5208 F_ALIAS. Use printf, not fprintf, when not passing a file
5210 (compare_opcodes): Check that identical instructions have
5211 identical opcodes, complain otherwise.
5214 * Include reg_names.
5216 Use dis-asm.h/read_memory_func interface.
5218 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5220 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5221 deliberately return non-zero to setjmp from longjmp. Otherwise
5222 this code fails to compile.
5224 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5226 * m68k-dis.c: Fix prototype for fetch_arg().
5228 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5230 * dis-buf.c: New file, for new read_memory_func interface.
5231 Makefile.in (OFILES): Include it.
5232 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5233 Use new read_memory_func interface.
5235 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5237 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5238 * h8500-opc.h: Fix couple of opcodes.
5240 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5242 * Makefile.in: add dvi & installcheck targets
5244 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5246 * Makefile.in: Update for h8500-dis.c.
5248 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5250 * h8500-dis.c, h8500-opc.h: New files
5252 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5254 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5255 ../include/dis-asm.h.
5256 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5257 and ../gdb/m68k-pinsn.c).
5258 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5259 and ../gdb/i386-pinsn.c).
5260 * m68881-ext.c: New file. Moved definition of
5261 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5262 * Makefile.in: Adjust for new files.
5263 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5264 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5265 can be dis-assembled.
5267 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5269 * mips-dis.c (print_insn_arg): Now returns void.
5271 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5273 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5274 files that use the macros.
5276 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5278 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5279 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5280 (CFILES): Added mips-dis.c.
5282 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5284 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5285 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5287 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5289 * Makefile.in: Improve *clean rules.
5290 * configure.in: Allow a default host.
5292 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5294 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5295 files include other sysdep files
5297 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5299 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5301 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5303 * configure.in: For host support, use ../bfd/configure.host
5304 so it stays in sync with the ../bfd/hosts database.
5306 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5308 * configure.in: use cpu-vendor-os triple instead of nested cases
5310 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5312 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5313 *always* the wrong one.
5315 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5317 * z8kgen.c: added copyright info
5319 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5321 * z8k-dis.c (unparse_instr): prettier tabs
5322 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5324 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5326 * configure.in: Add ncr* configuration.
5327 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5328 picayune ANSI compilers happy.
5330 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5332 * configure.in (i386): Make i386 and i486 synonymous for now.
5333 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5335 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5337 * Makefile.in (install): Fix typo.
5339 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5341 * Makefile.in (make): Remove obsolete crud.
5342 (sparc-opc.o): Avoid Sun Make VPATH bug.
5344 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5346 * Makefile.in: since there are no SUBDIRS, remove rule and
5347 references of subdir_do.
5349 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5351 * Makefile.in (install): Get the library name right here too.
5352 Don't install bfd.h, since it's unrelated to this library. No
5353 subdirs to recurse into, either.
5354 (CFILES): The source file has a .c suffix, not .o.
5356 * sparc-opc.c: New file, moved from BFD.
5357 * Makefile.in (OFILES): Build it.
5359 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5361 * z8k-dis.c: fixed forward refferences of some declarations.
5363 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5365 * Makefile.in: get the name of the library right
5367 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5369 * z8k-dis.c: knows how to disassemble z8k stuff
5370 * z8k-opc.h: new file full of z8000 opcodes
5374 version-control: never
projects / deliverable / binutils-gdb.git / blob