2 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
4 * fr30-opc.c: Regenerated.
5 * fr30-opc.h: Regenerated.
8 1998-11-18 Doug Evans <devans@casey.cygnus.com>
10 * cgen-asm.in (insert_1): Replace calls to bfd_getb8/putb8.
11 (insert_normal, !CGEN_INT_INSN_P case): Only fetch enough bytes
13 (insert_insn_normal): Fix typo.
14 * cgen-dis.c (cgen_dis_lookup_insn): Update type of `value' arg.
15 * cgen-dis.in (extract_normal): Ditto. New arg `pc'.
16 Rewrite ! CGEN_INT_INSN_P case.
17 (extract_insn_normal): Ditto.
18 (extract_1): New arg `pc'. All callers updated.
19 Replace calls to bfd_getb8.
21 * cgen-opc.c (cgen_{get,put}_insn_value): Move here ...
22 * cgen-opc.in: ... from here.
23 (@arch@_cgen_lookup_insn): Rewrite ! CGEN_INT_INSN_P case.
24 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
26 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
30 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
32 * fr30-opc.c: Regenerated.
34 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
36 * fr30-opc.c: Regenerated.
37 * fr30-opc.h: Regenerated.
38 * fr30-dis.c: Regenerated.
39 * fr30-asm.c: Regenerated.
41 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
43 * po/opcodes.pot: Regenerated.
44 * fr30-opc.c: Regenerated.
45 * fr30-opc.h: Regenerated.
46 * fr30-dis.c: Regenerated.
47 * fr30-asm.c: Regenerated.
49 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
51 * disassemble.c (disassembler): Add support for FR30 target.
54 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
57 * cgen-dis.in (print_normal): CGEN_OPERAND_FAKE renamed to
58 CGEN_OPERAND_SEM_ONLY.
60 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
62 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
64 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
66 * po/opcodes.pot: Regenerate.
67 * po/POTFILES.in: Regenerate.
68 * fr30-opc.c: Regenerate.
69 * fr30-opc.h: Regenerate.
71 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
73 * m32r-asm.c: Regenerate.
76 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
78 * configure.in: Added case for bfd_fr30_arch.
79 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
80 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
81 (CLEANFILES): Added stamp-fr30.
83 * fr30-asm.c: New file.
84 * fr30-dis.c: New file.
85 * fr30-opc.c: New file.
86 * fr30-opc.h: New file.
87 * po/POTFILES.in: Regenerated
88 * po/opcodes.pot: Regenerated
92 Mon Nov 2 20:08:03 1998 Doug Evans <devans@canuck.cygnus.com>
94 * m32r-opc.c (m32r_cgen_insn_table_entries): Add FILL_SLOT attribute
95 to bcl8,bncl8 entries.
96 (macro_insn_table_entries): Add FILL_SLOT attribute
97 to bcl8r,bncl8r entries.
100 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
102 * configure.in: detect cygwin* instead of cygwin32*
103 * configure: regenerate
105 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
107 * mips-opc.c (IS_M): Added.
110 Fri Oct 23 12:06:00 EDT 1998 Frank Ch. Eigler <fche@cygnus.com>
112 * mips-opc.c (vrget, vclipw, vrnext): Correct COP2 opcodes
116 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
118 start-sanitize-cygnus
119 * cgen-asm.in (insert_1): New function.
120 (insert_normal): Progress on handling ! CGEN_INT_INSN_P.
121 (insert_insn_normal): Update handling of CGEN_INT_INSN_P.
122 (@arch@_cgen_assemble_insn): Update type of `buf' arg.
123 * cgen-dis.in (extract_1): New function.
124 (extract_normal): buf_ctrl renamed to ex_info, update type.
125 Progress on handling of CGEN_INT_INSN_P.
126 (extract_insn_normal): buf_ctrl renamed to ex_info, update type.
127 Update handling of CGEN_INT_INSN_P. Handle errors from
128 @arch@_cgen_extract_operand.
129 (print_insn): Renamed from print_int_insn. Handle ! CGEN_INT_INSN_P.
130 (default_print_insn): Renamed from print_insn.
131 Handle ! CGEN_INT_INSN_P.
132 (print_insn_@arch@): Handle error returns from print_insn.
133 * cgen-opc.in (cgen_get_insn_value, cgen_put_insn_value): New fns.
134 (@arch@_cgen_lookup_insn): Update handling of CGEN_INT_INSN_P.
135 (@arch@_cgen_lookup_get_insn_operands): Ditto.
137 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
140 Wed Oct 14 12:12:25 1998 Jeffrey A Law (law@cygnus.com)
142 * m10300-opc.c: Allow autoincrement stores using the same register
143 for source and destination operands.
145 Mon Oct 12 10:43:51 1998 Jeffrey A Law (law@cygnus.com)
147 * m10300-opc.c: DSP instrutions which only write to one general
148 register have no restrictions on matching operands.
150 * m10300-opc.c (lsr_add): Fix typo for "lsr_add imm,reg,reg,reg" case.
153 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
155 * m32r-opc.h,m32r-opc.c: Regenerate.
158 Thu Oct 8 06:04:38 1998 Jeffrey A Law (law@cygnus.com)
160 * m10300-opc.c (asr, lsr, asl): Fix am33 single bit shift opcode.
163 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
165 * i386-dis.c (OP_3DNowSuffix): New static function.
168 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
169 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
170 (insn_codep): New static variable.
171 (print_insn_x86): Init insn_codep after prefixes.
172 (grps): Add GRP14 entries for prefetch, prefetchw.
175 From Jeff B Epler <jepler@usgs.gov>
176 * i386-dis.c (Suffix3DNow): New table.
178 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
180 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
182 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
184 * d10v-dis.c (print_operand): If num is nonzero, then
185 add OPERAND_ACC1, not OPERAND_ACC0.
187 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
189 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
192 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
194 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
198 Fri Sep 18 16:23:32 1998 Doug Evans <devans@canuck.cygnus.com>
200 * dvp-opc.c (gif_opcodes): Support EOP on gifimage.
203 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
205 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
207 start-sanitize-nortel-ppc750
208 1998-09-09 Michael Meissner <meissner@cygnus.com>
210 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
213 end-sanitize-nortel-ppc750
214 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
216 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
218 (print_insn_little_arm): Detect Thumb symbols in elf object
221 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
223 * alpha-dis.c (print_insn_alpha): Use the machine type to
224 decide which PALcode set to include.
226 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
228 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
230 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
232 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
233 MSUB and MSUBS instructions.
236 Tue Aug 18 16:48:52 1998 Ian Lance Taylor <ian@cygnus.com>
238 * mips-opc.c: Insert contents of vu0.h, rather than including it.
240 * Makefile.am: Rebuild dependencies.
244 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
246 * ppc-opc.c (powerpc_operands): Omit parens around additions in
249 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
251 start-sanitize-coldfire
252 * m68k-opc.c: Correct divsl, divul, remsl, and remul for
253 ColdFire, as below for mulsl and mulul.
255 end-sanitize-coldfire
256 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
257 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
258 +, -, and d for ColdFire.
260 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
261 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
262 (extract_mbe): Likewise.
264 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
266 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
268 * m10300-opc.c: First cut at UDF instructions.
270 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
272 * m32r-opc.c: Regenerate (remove semantic descriptions).
274 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
276 * arm-dis.c (print_insn_big_arm): Fix indentation.
277 (print_insn_little_arm): Likewise.
279 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
281 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
283 (print_insn_little_arm): Likewise.
285 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
287 Move all global state data into opcode table struct, and treat
288 opcode table as something that is "opened/closed".
289 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
290 (cgen_asm_init): Delete.
291 (cgen_set_parse_operand_fn): New function.
292 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
293 (cgen_dis_init): Delete.
294 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
295 (cgen_current_{opcode_table_mach,endian}): Delete.
296 start-sanitize-cygnus
297 * cgen-asm.in (all fns): New first arg of opcode table descriptor.
298 * cgen-dis.in (all fns): Ditto.
299 * cgen-opc.in (all fns): Ditto.
301 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
303 start-sanitize-cygnus
304 * cgen-asm.in (parse_insn_normal): Ignore case in mnemonics.
306 * cgen-dis.in (print_normal): Split into two.
307 (print_address): New function.
308 (extract_insn_normal): Clarify insn_value arg.
309 (print_int_insn): Renamed from print_insn.
310 (print_insn): New arg.
311 (print_insn_@arch@): Open opcode table if not already done so.
312 Move reading of insn into print_insn.
315 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
317 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
321 Tue Jul 28 13:15:39 1998 Doug Evans <devans@canuck.cygnus.com>
323 Add support for new versions of mulwhi,mulwlo,macwhi,macwlo that
324 accept an accumulator choice.
325 * m32r-opc.c,m32r-opc.h: Regenerate.
328 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
330 * m10300-opc.c: Add entries for "no_match_operands" field in
334 Fri Jul 24 15:22:40 1998 Jeffrey A Law (law@cygnus.com)
336 * m10300-dis.c: Do not emit a comma before a PLUS (autoincrement)
340 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
342 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
345 Thu Jul 23 09:21:03 1998 Jeffrey A Law (law@cygnus.com)
347 * m10300-opc.c: Add DSP autoincrement memory loads/stores.
349 * m10300-opc.c: Add autoincrement memory loads/stores.
353 Wed Jul 22 17:05:40 1998 Jeffrey A Law (law@cygnus.com)
355 * mips-opc.c: Make phmadh and phmsbh synonyms for phmaddh and
356 phmsubh respectively.
359 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
361 start-sanitize-cygnus
362 * cgen-opc.in (@arch@_cgen_lookup_insn): Update call to
364 (@arch@_cgen_get_insn_operands): @arch@_cgen_get_operand renamed to
365 @arch_cgen_get_int_operand.
366 * cgen-asm.in (insert_insn_normal): New arg `pc', callers updated.
367 Update call to @arch@_cgen_insert_operand.
368 (@arch@_cgen_assemble_insn): Update call to CGEN_INSERT_FN.
369 * cgen-dis.in (print_normal): Delete use of CGEN_PCREL_OFFSET.
370 (extract_insn_normal): New arg `pc', callers updated.
371 Update call to @arch@_cgen_extract_operand.
372 (print_insn): Update call to CGEN_EXTRACT_FN.
374 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
377 Mon Jul 20 12:10:37 1998 Jeffrey A Law (law@cygnus.com)
379 * m10300-opc.c: Fix load to sp and store from sp for the am33.
380 Add more multimedia instructions.
382 Thu Jul 16 18:04:46 1998 Jeffrey A Law (law@cygnus.com)
384 * m10300-opc.c (mn10300_opcodes): Fix opcode for 4 operand "mul" and
389 Mon Jul 13 18:14:24 1998 Jeffrey A Law (law@cygnus.com)
391 * mips-opc.c (pref): Enabled for the r5900.
394 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
396 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
398 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
400 (OP_J): Remove unnecessary subtraction when 16-bit displacement
401 will be masked later.
404 Fri Jul 10 23:09:56 1998 Jeffrey A Law (law@cygnus.com)
406 * m10300-opc.c (mn10300_opcodes): Fix destination operand for 3 operand
409 Wed Jul 8 11:32:44 1998 Jeffrey A Law (law@cygnus.com)
411 * m10300-dis.c (disassemble): When printing RREGs and XRREGs, map
412 from raw register #s to symbolic names to make debugging easier.
415 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
417 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
419 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
421 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
422 start-sanitize-cygnus
423 * Makefile.am (CGENDIR): Set via configure.
424 (CGEN): New variable.
425 (CGENFILES): object.scm renamed to cos.scm.
426 (run-cgen): Renamed from cgen. stamp file renamed to stamp-$prefix.
427 (stamp-m32r): Pass prefix to run-cgen.
428 * Makefile.in: Regenerate.
429 * cgen-asm.in: @arch@-opc.h renamed to @prefix@-opc.h.
430 * cgen-dis.in: Ditto.
431 * cgen-opc.in: Ditto.
432 * cgen.sh: New args cgen,prefix. Delete args scheme,schemeflags.
433 * configure.in: AC_SUBST cgen,cgendir. No longer look for guile.
434 * configure: Regenerate.
438 Tue Jun 30 09:59:37 1998 Jeffrey A Law (law@cygnus.com)
440 * m10300-opc.c: Reorder "movbu" and "movhu" instructions too.
442 Mon Jun 29 14:54:32 1998 Jeffrey A Law (law@cygnus.com)
444 * m10300-opc.c: Reorder more instructions so that we do not
445 accidentally match a mn10300 instruction when we really
446 wanted an am33 instruction.
449 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
451 * m10300-dis.c: Only recognize instructions from the currently
453 * m10300-opc.c: Add field indicating the particular variant of
454 the mn10300 each instruction is available on.
456 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
458 * configure.in: For bfd_vax_arch, build vax-dis.lo.
459 * Makefile.am: Rebuild dependencies.
460 (CFILES): Add vax-dis.c.
461 (ALL_MACHINES): Add vax-dis.lo.
462 * aclocal.m4: Rebuild with current libtool.
463 * configure, Makefile.in: Rebuild.
465 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
467 * vax-dis.c: New file, from work by Pauline Middelink
468 <middelin@polyware.iaf.nl>.
469 * disassemble.c (ARCH_vax): Define if ARCH_all.
470 (disassembler): Add case for ARCH_vax.
471 * makefile.vms: Support compilation on vms/vax.
474 Wed Jun 24 17:14:01 1998 Ian Carmichael <iancarm@cygnus.com>
476 * dvp-opc.c (DVP_OPERAND_RELOC_11_S4): Temporarily back out
477 the DVP_OPERAND_RELOC_11_S4 relocation.
481 Wed Jun 24 09:53:06 1998 Jeffrey A Law (law@cygnus.com)
483 * m10300-dis.c (print_insn_mn10300): 0xf7 opcode prefix specifies
485 (disassemble): Correctly handle FMT_D10 instructions.
487 * m10300-opc.c (mn10300_opcodes): Fix typo in IMM24 versions of the
488 am33 shift instructions.
490 * m10300-dis.c (print_insn_mn10300): 0xf9 opcode prefix specifies
492 (disassemble): Handle new instruction formats FMT_D6, FMT_D7, FMT_D8
493 FMT_D9 and FMT_D10. Handle various new opcode flags for the am33.
495 * m10300-opc.c (IMM32_HIGH8_MEM): New operand type.
496 (mn10300_opcodes): Reorder so as to try and select opcodes from
497 the core chip when multiple alternatives exist. Change several
498 am33 instructions to use IMM32_HIGH8_MEM. Fix typos in "mac" and
499 "macbu" instructions. Fix typos in a couple DSP instructions too.
502 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
504 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
505 related to sign extension and the size of ints.
507 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
509 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
510 instructions. Support (sp) addressing mode by expanding it into
514 Mon Jun 22 15:48:29 1998 Ian Carmichael <iancarm@cygnus.com>
516 * dvp-opc.c (LIMM11, LUIMM15): New symbol types
517 DVP_OPERAND_RELOC_U15_S3 and DVP_OPERAND_RELOC_11_S4 to allow labels to
518 be used as immediate values.
522 Mon Jun 22 13:36:27 1998 Jeffrey A Law (law@cygnus.com)
524 * m10300-opc.c: Support 4 byte DSP instructions.
527 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
529 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
532 Fri Jun 19 16:47:06 1998 Jeffrey A Law (law@cygnus.com)
534 * m10300-opc.c: Support 6 and 7 byte am33 instructions.
537 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
539 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
542 Fri Jun 19 09:42:51 1998 Jeffrey A Law (law@cygnus.com)
544 * m10300-opc.c: Support for 3 byte and 4 byte extended instructions
545 found on the mn10300.
548 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
550 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
553 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
555 * mips-dis.c (print_insn_little_mips): Previously, instruction
556 printing references the symbol table to determine whether the
557 instruction resides in a block regular instructions or mips16
558 instructions. However, when the disassembler gets used in other
559 environments where the symbol table is not present, we no longer
560 rely in the symbol table, rather, use the low bit of the
561 instructions address to guess. There should be no change for usage
562 of the disassembler in host based programse, gdb ,objdump.
563 (print_insn_big_mips): ditto.
564 (print_insn_mips): ditto
566 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
568 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
570 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
573 * m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
574 operands for the am33.
575 (mn10300_opcodes): Add new instructions from the am33.
577 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
579 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
581 * i386-dis.c (index16): Add '%' to register names. Use ','
584 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
586 * i386-dis.c: Don't print opcode suffix when we can figure out the
587 size (and gas can!) by register operands, or from the default
589 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
591 (dis386, dis386_twobyte, grps): Use new suffix macros.
592 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
593 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
594 order of cmps operands to agree with Intel docs. Correct operand
595 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
596 agree with Intel docs.
597 (print_insn_x86): Print orphan fwait before other prefixes.
598 Return correct byte count for orphan fwait with prefixes. Don't
599 print `bound' operands in reverse order.
600 (ckprefix): Stop accumulating prefixes if we get fwait.
601 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
603 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
605 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
606 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
608 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
610 Fix problems when bfd_vma is wider than long.
611 * i386-dis.c: Make op_address and start_pc unsigned.
612 (set_op): Make parameter unsigned.
613 (print_insn_x86): Cast to bfd_vma when passing a value to
615 * ns32k-dis.c (CORE_ADDR): Don't define.
616 (print_insn_ns32k): Change type of addr to bfd_vma. Use
617 bfd_scan_vma to read back address.
618 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
620 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
621 (NEXTULONG): New definition.
622 (print_insn_m68k): Avoid overflow when computing third argument of
624 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
625 Use disp instead of val to store offset values.
626 (print_indexed): Use base_disp instead of word to store base
627 displacement, to avoid overflow.
628 * m10300-dis.c (disassemble): Cast value to long when computing
629 pc-relative address, to get correct sign extension.
631 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
633 * m32r-opc.c: Regenerate.
635 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
637 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
638 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
640 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
642 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
644 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
646 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
648 (OP_DSreg): Rename from OP_DSSI.
649 (OP_ESreg): Rename from OP_ESDI.
650 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
652 (append_seg): Rename from append_prefix.
653 (ptr_reg): New function.
654 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
656 (PREFIX_ADDR): Rename from PREFIX_ADR.
657 (float_reg): Add non-broken opcodes for people who don't want
660 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
662 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
665 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
667 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
669 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
671 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
672 0; produce error message for shifts of size 32 (or 64 for 64-bit
673 shifts), because the hardware doesn't support them.
676 Mon Jun 1 10:27:26 1998 Jeffrey A Law (law@cygnus.com)
678 * mips-opc.c (c.lt.s): Remove r5900 specific variant.
681 * vu0.h (sqc2): Fix opcode.
683 * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
687 start-sanitize-cygnus
688 Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
690 * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
691 Change pinfo to use WR_HILO.
694 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
696 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
697 LONG_2, LONG_2b formats to use this new operand.
699 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
701 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
703 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
705 * sparc-dis.c (print_insn_sparc): big endian instruction / little
708 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
710 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
711 and SHORT_B3b formats to use Rb instead of Ra.
713 Add FLAG_MUL16 to MUL2XH opcode.
715 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
716 to existing 1.1.1 parallelisation prohibition procedure.
718 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
720 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
721 * cgen-dis.in (extract_normal): Likewise.
722 * m32r-asm.c,m32r-dis.c: Regenerate.
725 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
727 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
731 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
733 * mips-opc.c (multu1): Add two operand variant for the r5900.
736 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
738 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
739 with a shift count of 0.
742 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
744 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
746 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
748 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
749 (_print_insn_mips): Likewise.
750 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
754 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
756 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
757 (cgen_hw_lookup_by_num): New function.
760 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
763 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
765 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
767 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
769 * sparc-dis.c (print_insn_sparc): Always fetch instructions
770 as big-endian on SPARClite.
773 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
775 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
777 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
781 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
783 * d30v-opc.c (pre_defined_register): Remove alias for r0.
786 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
788 * mips-opc.c (break): Added 20-bit single-operand break
789 instruction for R5900 only.
792 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
794 * po/Make-in (install-info): New target.
796 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
798 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
799 * configure: Rebuild.
801 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
803 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
804 variety of ISA2 instructions to set bottom ten bits of trap code.
806 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
808 * Makefile.am (config.status): Add explicit target so that
809 config.status depends upon bfd/configure.in.
810 * Makefile.in: Rebuild.
812 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
814 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
815 instructions to set bottom ten bits of break code.
816 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
817 for above optional argument.
819 start-sanitize-cygnus
820 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
822 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
823 * m32r-opc.h: Regenerate.
826 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
828 * makefile.vms: Run dec c with /nodebug.
830 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
832 * Makefile.in: Rebuilt.
833 * Makefile.am: Regenerated dependencies with mkdep.
835 * opintl.h (_): Define as dgettext.
837 start-sanitize-cygnus
838 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
840 * configure.in: Add support for --enable-cgen-maint.
841 * Makefile.am (M32R_DEPS): New variable.
842 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
843 * aclocal.m4: Regenerate.
844 * Makefile.in: Regenerate.
845 * configure: Regenerate.
847 * Makefile.am (CGENFILES): Add minsn.scm.
850 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
852 * cgen-asm.c: Internationalised.
853 start-sanitize-cygnus
854 * cgen-asm.in: Internationalised.
855 * cgen-opc.in: Internationalised.
857 * m32r-asm.c: Internationalised.
858 * m32r-dis.c: Internationalised.
859 * m32r-opc.c: Internationalised.
861 * aclocal.m4: Regenerated.
862 * configure: Regenerated.
863 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
864 * Makefile.in: Rebuild.
865 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
866 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
868 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
870 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
872 * aclocal.m4, configure: Rebuild with current tools.
874 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
876 * opintl.h: New file - contains internationalisation macros used
877 by source files in this directory.
878 * po/: New subdirectory - contains internationalisation files.
879 * po/Make-in: New file - Makefile constructor.
880 * po/POTFILES.in: New file - list of files in opcodes directory
881 that should be scan for internationalisation macros.
882 * po/opcodes.pot: New file - list of internationisation strings
883 found in files mentioned in po/POTFILES.in.
884 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
885 entry. Add intl directory to include paths.
886 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
887 HAVE_STRCPY, HAVE_LC_MESSAGES
888 * configure.in: Add rule to build Makefile in po subdirectory.
889 * Makefile.in: Rebuilt.
890 * aclocal.m4: Rebuilt.
891 * config.in: Rebuilt.
892 * configure: Rebuilt.
893 * alpha-opc.c: Internationalised.
894 * arc-dis.c: Internationalised.
895 * arc-opc.c: Internationalised.
896 * arm-dis.c: Internationalised.
897 * cgen-asm.c: Internationalised.
898 * d30v-dis.c: Internationalised.
899 * dis-buf.c: Internationalised.
901 * dvp-dis.c: Internationalised.
902 * dvp-opc.c: Internationalised.
904 * h8300-dis.c: Internationalised.
905 * h8500-dis.c: Internationalised.
906 * i386-dis.c: Internationalised.
907 * m10200-dis.c: Internationalised.
908 * m10300-dis.c: Internationalised.
909 * m68k-dis.c: Internationalised.
910 * m88k-dis.c: Internationalised.
911 * mips-dis.c: Internationalised.
912 * ns32k-dis.c: Internationalised.
913 * opintl.h: Internationalised.
914 * ppc-opc.c: Internationalised.
915 * sparc-dis.c: Internationalised.
916 * v850-dis.c: Internationalised.
917 * v850-opc.c: Internationalised.
919 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
921 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
922 (asm_hash_table_entries): New variable.
923 (cgen_asm_init): Free asm_hash_table_entries.
924 (hash_insn_array,hash_insn_list): New functions.
925 (build_asm_hash_table): Use them. Hash macro insns as well.
926 (cgen_asm_lookup_insn): Update.
927 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
928 (dis_hash_table_entries): New variable.
929 (cgen_dis_init): Free dis_hash_table_entries.
930 (hash_insn_array,hash_insn_list): New functions.
931 (build_dis_hash_table): Use them. Hash macro insns as well.
932 (cgen_dis_lookup_insn): Update.
933 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
934 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
935 (cgen_macro_insn_count): New function.
936 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
937 All callers updated. Sanity check result of extract fn.
938 (@arch@_cgen_get_insn_operands): Change result type to void.
939 Delete args insn_value, length. New arg fields. All callers updated.
940 (@arch@_cgen_lookup_get_insn_operands): New function.
941 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
943 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
945 * i386-dis.c (OP_DSSI): Print segment override.
948 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
950 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
954 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
956 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
960 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
962 * vu0.h (vlqd, vlqi): Update per revised specs.
966 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
968 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
969 (vif_operands): Update.
970 (vif_get_unpackloc): Delete.
971 (state_vif_unpackloc{,_star_p}): Delete.
972 (dvp_opcode_init_parse): Update.
973 (vif_unpack_len_value): Avoid divide by zero.
977 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
979 * vu0.h: Specs changed for VCALLMSR bit pattern.
980 * mips-dis.c: (print_insn_arg) Matching change.
983 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
985 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
988 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
990 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
991 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
992 * configure.in: Define and substitute WIN32LDFLAGS and
994 * aclocal.m4: Rebuild with new libtool.
995 * configure, Makefile.in: Rebuild.
998 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1000 * vu0.h: Corrected bit pattern for VMAXI opcode.
1003 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1005 * m32r-opc.c: Regenerate.
1008 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
1010 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
1011 (dvp_expand_macro): Implement.
1012 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
1013 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
1016 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1018 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1019 before trying to copy it.
1020 * Makefile.in: Rebuild.
1022 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1024 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1026 start-sanitize-m32rx
1027 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
1029 * m32r-opc.c: Fix bit patterns for SAT and SATB.
1032 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1034 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1035 from an arbitrary valid buffer instead of fetching them on demand
1037 (invalid_float): use bit_extract_simple() instead of bit_extract().
1039 start-sanitize-m32rx
1040 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
1042 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
1043 * m32r-opc.h: Add extra control registers.
1046 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1048 From H.J. Lu <hjl@gnu.org>:
1049 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1052 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1054 * Branched binutils 2.9.
1056 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1058 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1059 disassembling last 4 bytes of a section.
1061 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1063 Fix some gcc -Wall warnings:
1064 * arc-dis.c (print_insn): Add casts to avoid warnings.
1065 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1066 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1068 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
1069 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
1070 (parse_bc, parse_vfreg, parse_accdest): Likewise.
1071 (parse_ffstreg, parse_vif_mode): Likewise.
1073 * m10200-dis.c (disassemble): Likewise.
1074 * m10300-dis.c (disassemble): Likewise.
1075 * ns32k-dis.c (print_insn_ns32k): Likewise.
1076 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1077 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1078 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1079 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1080 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1082 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
1083 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
1084 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
1086 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1087 start-sanitize-tic80
1088 * tic80-dis.c (print_one_instruction): Likewise.
1090 * w65-dis.c (print_operand): Likewise.
1091 * z8k-dis.c (fetch_data): Likewise.
1092 * a29k-dis.c: Add return type for find_byte_func_type.
1093 * arc-opc.c: Include <stdio.h>. Remove declarations of
1094 insert_multshift and extract_multshift.
1095 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1097 (extract_value): Fully parenthesize expression.
1099 * dvp-opc.c: Include <ctype.h>.
1100 (print_sdest): Add default case to switch.
1102 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1103 * h8500-opc.h (h8500_table): Fully bracket initializer.
1104 * w65-opc.h (optable): Likewise.
1105 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1106 * i386-dis.c (OP_E): Initialize local variables.
1107 * m10200-dis.c (print_insn_mn10200): Likewise.
1108 * mips-dis.c (print_insn_mips16): Likewise.
1109 * sh-dis.c (print_insn_shx): Likewise.
1110 * v850-dis.c (print_insn_v850): Likewise.
1111 * ns32k-dis.c (print_insn_arg): Declare.
1112 (get_displacement, invalid_float): Declare.
1113 (list_search, sign_extend, flip_bytes): Declare return type.
1114 (get_displacement): Likewise.
1115 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1117 (print_insn_ns32k): Make i unsigned.
1118 (invalid_float): Make static. Declare type of val.
1119 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1120 on each for iteration.
1121 * tic30-dis.c (get_indirect_operand): Likewise.
1122 * z8k-dis.c (print_insn_z8001): Declare return type.
1123 (print_insn_z8002): Likewise.
1124 (unparse_instr): Fix sprintf format strings.
1126 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1128 * mips-opc.c: Add "sync.l" and "sync.p".
1131 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
1133 * dvp-opc.c (extract_vif_datalen): Rewrite.
1134 (vif_insn_len): Perform 0->max+1 conversion for direct length.
1136 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
1138 * dvp-dis.c (print_insn): Print unpack address in hex.
1139 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
1140 Don't skip over '*', just record it.
1141 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
1142 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
1143 Don't skip over '*', just record it.
1144 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
1145 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
1146 (vif_opcodes): Likewise.
1147 (state_vif_{mpg,unpack}loc_star_p): New static locals.
1148 (vif_macros,vif_macro_count): New globals.
1149 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
1150 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
1151 (vif_get_wl_cl): New function.
1152 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
1155 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1157 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1158 default m68k variant to recognize.
1160 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1161 (ctrl, cobr, mem, ea): Likewise.
1162 (print_addr): Likewise. Remove cast.
1163 (ea): Cast argument of print_addr to bfd_vma.
1165 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1167 (cgen_parse_unsigned_integer): Likewise.
1168 (cgen_parse_address): Likewise.
1170 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1172 * i960-dis.c (ctrl): Add full braces to structure initialization.
1173 (cobr, mem, reg): Likewise.
1174 (ea): Correct parenthesization in expression.
1176 * cgen-asm.c: Include <ctype.h>.
1177 (build_asm_hash_table): Remove unused local variable i.
1178 (cgen_parse_keyword): Add casts to avoid warnings.
1180 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1181 symbol. Fix indentation.
1182 (print_insn_little_arm): Likewise.
1184 start-sanitize-r5900
1185 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
1187 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
1191 start-sanitize-m32rx
1192 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
1194 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
1199 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
1201 * dvp-opc.c (vif_operand_datalen_special): New global.
1204 start-sanitize-r5900
1205 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
1207 * vu0.h (vcallms): Use 'O' for call target operand.
1208 * mips-dis.c (print_insn_arg): Handle 'O'.
1211 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1213 * configure.in: Use AM_DISABLE_SHARED.
1214 * aclocal.m4, configure: Rebuild with libtool 1.2.
1216 start-sanitize-r5900
1217 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
1219 * mips-dis.c: Change '%' to '#' in r5900 support.
1223 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1225 These patches are courtesy of Jonathan Walton and Tony Thompson
1226 (athompso@cambridge.arm.com).
1228 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1231 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1232 both the offset and the label closest to the destination.
1234 start-sanitize-r5900
1235 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
1237 * vu0.h: New file with cop2/vu0 instructions.
1238 * mips-opc.c: Include vu0.h.
1239 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
1241 (print_insn_mips): Do not emit a tab after an instruction if the
1242 first arg is an instruction completer (&). If the next arg is an
1243 escape character (%), then print the next arg verbatim.
1244 * Makefile.am (mips-opc.lo): Depend on vu0.h
1248 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
1250 * dvp-opc.c (vif_opcodes): Add stcycl.
1252 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
1254 * dvp-dis.c (print_dma): Change length from 16 to 8.
1257 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1259 * m32r-opc.h: Regenerate.
1262 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
1264 * dvp-opc.c (print_dest1): Print dest spec again.
1265 (print_vfreg,print_accdest): Likewise.
1266 (vif_unpack_len): Round result up to word boundary.
1269 start-sanitize-vr4320
1270 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
1272 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
1274 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
1276 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
1281 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
1283 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
1284 (print_insn): Do mask comparison on proper opcode word.
1285 Print unsigned values in hex.
1286 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
1287 (parse_bc): Catch missing dest.
1288 (parse_vfreg): Replace atoi call with strtol.
1289 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
1290 (parse_bcftreg,parse_ffstreg): Handle missing dest.
1291 (extract_gif_eop): New function.
1292 (gif_operands): Update eop entry.
1293 (VGIFOP,VGIFNREGS): Fix calcs.
1294 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
1295 (gif_regs): Add entry for unused 11 case.
1296 (print_gif_regs): Print empty list instead of nothing.
1297 (extract_gif_nloop): Fix value calc.
1298 (print_gif_nloop): Always print value, even if 0.
1299 (insert_vif_wlcl,extract_vif_wlcl): New functions.
1300 (vif_operands): Use them for wl,cl fields.
1301 (state_vif_wl,state_vif_cl): New static locals.
1302 (parse_vif_mode): Handle numeric args.
1303 (vif_unpack_len_value,vif_unpack_len): New functions.
1304 (vif_insn_len): Call vif_unpack_len.
1307 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1309 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1311 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
1313 * cgen-asm.in: Move insertion of generated routines to top of file.
1314 (insert_normal): Add prototype. Delete `shift' arg.
1315 * cgen-dis.in: Move insertion of generated routines to top of file.
1316 (extract_normal): Add prototype. Delete `shift' arg.
1317 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
1318 (print_keyword): Add prototype. Fix type of `attrs' arg.
1320 start-sanitize-vr4320
1321 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
1323 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
1324 * mips-opc.c ("mac","dmac") : Added 4320 insns.
1327 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1329 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1330 assume that info->symbols is non-empty.
1332 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1334 * alpha-opc.c (cvtqs) There is no such thing.
1335 (cvttq): Missing most of the /*d variants.
1337 start-sanitize-r5900
1338 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
1340 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
1342 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
1343 (r5900/msub.s): Takes three operands, not four. Fix opcode.
1346 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1348 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1349 delayed branches or jumps.
1352 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
1354 * dvp-opc.c (vif_operands): Add unpack[u] support.
1355 (vif_opcodes): Ditto.
1356 (*_vif_imrubits): Renamed from *_vif_imrbits.
1358 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
1360 * dvp-dis.c (print_insn): Handle word number.
1361 Handle mips address vs vu address.
1362 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
1363 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
1364 ({insert,extract}_dma_addr): Fix word ofset.
1365 ({insert,print}_gif_regs): Fix encode/decode.
1368 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1370 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1372 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1373 * tic30-dis.c (print_branch): Likewise.
1375 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
1376 * dvp-dis.c (dvp_info_mach_type): New function.
1377 (print_insn_dvp): Call it.
1378 (print_vif): Return length of 4 if mpg or direct insn so following
1379 insns get properly disabled.
1380 (print_gif): Fix word order.
1381 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
1382 (gif_operands): Fix word order.
1383 (gif_opcodes): Likewise.
1384 ({insert,extract,print}_gif_regs): Likewise.
1385 (gif_regs): Add new register number/name changes.
1386 (dma_opcodes): Add dmarefe insn.
1389 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1391 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1392 saved_symbol code as it is no longer needed.
1394 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1396 * cgen-asm.c: Include symcat.h.
1397 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
1399 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1402 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
1404 * dvp-opc.c (extra_dma_flags): Fix typos.
1405 (dma_operands): Fix word numbers.
1406 (dma_opcodes): Likewise.
1407 ({insert,extract}_dma_flags): Likewise.
1410 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1412 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1415 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
1417 * dvp-dis.c (print_gif): Complete.
1418 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
1419 (state_gif_{nregs,regs,nloop}): New static locals.
1420 (*_gif_*): Complete.
1421 (dvp_opcode_init_{parse,print}): Init gif state locals.
1422 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
1423 (vif_insn_len): Handle `unpack'.
1424 ({insert,extract}_dma_flags): Complete.
1427 start-sanitize-r5900
1428 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
1430 * mips-opc.c (mula.s): Renamed from multa.s.
1433 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1435 * m32r-opc.[ch]: Regenerate.
1438 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
1440 * dvp-opc.c (dma_operands): Rewrite.
1441 (dma_operand_{count,addr}): New globals.
1442 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
1443 (insert_dma_addr): Insert value into insn.
1444 (extract_dma_addr): Extract value from insn.
1446 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
1448 * dvp-dis.c (print_vu): Handle loi insns.
1449 (print_insn): Likewise.
1450 * dvp-opc.c (vu_lower_opcodes): Add "loi".
1451 (vu_operands): Make LDEST1 a FAKE operand.
1452 (parse_dest1): Allow elided argument.
1453 (print_dest1): Don't print the argument.
1455 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
1457 * dvp-opc.c (parse_vfreg): Dest spec is optional.
1458 (print_vfreg): Don't print dest spec.
1459 (parse_accdest): Dest spec is optional.
1460 (print_accdest): Don't print dest spec.
1463 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1465 * Makefile.am (CGENFILES): Update.
1466 * Makefile.in: Regenerate.
1467 * cgen-asm.in (insert_normal): Result is error message now.
1468 Validate value to be inserted.
1469 (insert_insn_normal): Result is error message now.
1470 (@arch@_cgen_assemble_insn): Update.
1471 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1472 arguments. Don't perform validation here.
1473 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1475 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1477 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
1478 operand instance list.
1479 * m32r-opc.c: Regenerate.
1481 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1483 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1484 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1486 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1488 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1490 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1492 * configure.in: Get the version number from BFD.
1493 * configure: Rebuild.
1495 From H.J. Lu <hjl@gnu.org>:
1496 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1497 * Makefile.in: Rebuild.
1499 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1501 * m32r-opc.c: Regenerate.
1502 * m32r-opc.h: Regenerate.
1504 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1506 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
1507 Ignore ALIAS insns if asked to.
1508 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
1509 * m32r-opc.c: Regenerate.
1512 * dvp.opc.c: Nicely format opcode tables.
1513 (vu_operands): New element UFLAGS.
1514 (parse_uflags,print_uflags): New functions.
1515 (vu_upper_opcodes): Add UFLAGS to all insns.
1518 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1520 Fix rac to accept only a0:
1521 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1522 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1523 Introduce OPERAND_GPR.
1524 * d10v-dis.c (print_operand): Likewise.
1526 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1528 * cgen-opc.in: New file.
1529 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
1530 * Makefile.am (CGENFILES): Add cgen-opc.in.
1531 * Makefile.in: Regenerate.
1533 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1534 (cgen_hw_lookup): Make result const.
1536 * cgen-dis.in (*): Use PTR instead of void *.
1537 (print_insn): Delete unused vars `i', `syntax'.
1539 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1542 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
1544 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
1545 (vif_opcodes): Update renamed insns.
1546 * dvp-dis.c (*): Likewise.
1549 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1551 * configure, aclocal.m4: Rebuild with new libtool.
1553 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1555 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1556 instructions use a PC relative branch, not absolute.
1558 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1560 * configure.in: Set libtool_enable_shared rather than
1561 libtool_shared. Remove diversion hack.
1562 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1564 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1566 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1567 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1569 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1571 * tic30-dis.c: New file.
1572 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1573 * configure.in: Handle bfd_tic30_arch.
1574 * Makefile.am: Rebuild dependencies.
1575 (CFILES): Add tic30-dis.c
1576 (ALL_MACHINES): Add tic30-dis.lo.
1577 * configure, Makefile.in: Rebuild.
1579 start-sanitize-m32rx
1580 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
1582 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
1583 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
1584 macwhi-a and macwlo-a instructions.
1588 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
1590 * dvp-opc.c, fixed encoding of a bunch of instructions to
1591 be consistent with the asmvu assembler (and inconsistent
1592 with the specification).
1594 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
1596 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
1597 in the opcode table. The pkemscalf instruction must come first.
1599 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
1601 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
1604 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1606 * m32r-opc.h (HAVE_CPU_M32R): Define.
1609 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
1611 * dvp-dis.c, dvp-opc.c: New files.
1612 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
1613 * configure: Regenerate.
1614 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
1615 (dvp-dis.lo,dvp-opc.lo): Add rules for.
1616 (mips-dis.lo): Compile with @archdefs@.
1617 * Makefile.in: Regenerate.
1618 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
1619 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
1622 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1624 * v850-opc.c (insertion routines): If both alignment and size is
1625 wrong then report this.
1627 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1629 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1630 Only recognize instructions for the current target_processor.
1632 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1634 * d10v-dis.c (PC_MASK): Correct value.
1635 (print_operand): If there's a reloc, don't calculate the
1636 address because they could be in different sections.
1638 start-sanitize-cygnus
1639 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
1641 * cgen.sh: Rewrite to be like simulator's version.
1642 * Makefile.am (cgen): Update call to cgen.sh.
1643 * Makefile.in: Regenerate
1646 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1648 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1649 instruction after the 4650's "mul" instruction; nobody's using the
1650 4010 these days. If object files someday indicate which processor
1651 variant they're intended for, we can do a better job at this.
1653 start-sanitize-r5900
1654 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
1656 * mips-opc.c (c.lt.s): Add r5900 variant.
1660 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1662 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1663 table provided entry size. Use CGEN_INSN_MNEMONIC.
1664 (cgen_parse_keyword): Rewrite.
1665 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1666 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1667 * cgen-opc.c: Clean up pass over `struct foo' usage.
1668 (cgen_keyword_lookup_value): Handle "" entry.
1669 (cgen_keyword_add): Likewise.
1670 start-sanitize-cygnus
1671 * Makefile.am: Add cgen support.
1672 * Makefile.in: Regenerate.
1673 * configure.in: Add cgen support.
1674 * configure: Regenerate.
1675 * aclocal.m4: Regenerate.
1676 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1679 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1681 * mips-opc.c: Add FP_D to s.d instruction flags.
1683 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1685 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1687 start-sanitize-tic80
1688 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1690 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1691 PC relative offset forms before the 15 bit forms. An assembler command
1692 line option now chooses the default.
1695 start-sanitize-r5900
1696 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1698 * mips-opc.c: Add many missing r5900 instructions.
1701 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1703 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1704 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1706 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1708 * configure: Only build libopcodes shared if --enable-shared's value
1709 was `yes', or was set to `*opcodes*'.
1710 * aclocal.m4: Likewise.
1711 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1712 original source of this bit of code. It's not clear what the best fix
1715 start-sanitize-r5900
1716 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1718 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1720 start-sanitize-tic80
1721 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1723 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1724 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1725 offset forms before the 15 bit forms, to default to the long forms.
1728 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1730 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1732 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1734 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1735 symbol if none is present.
1736 (print_insn_big_arm): Prevent examination of stored symbol if
1739 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1741 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1743 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1745 * disassemble.c: Remove disasm_symaddr() function.
1747 * arm-dis.c: Use info->symbol instead of info->flags to determine
1748 if disassmbly should be in Thumb or Arm mode.
1750 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1752 * arm-dis.c: Add support for disassembling Thumb opcodes.
1753 (print_insn_thumb): New function.
1755 * disassemble.c (disasm_symaddr): New function.
1757 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1758 (thumb_opcodes): Table of Thumb opcodes.
1760 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1762 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1764 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1765 and 'v' as operand types.
1767 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1769 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1770 <olivier.carmona@di.epfl.ch>.
1771 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1772 which has a two word opcode with a one word argument.
1774 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1776 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1777 unsigned, not signed.
1778 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1780 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1782 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1783 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1784 (ftrv): Slay the cut-and-paste monster.
1786 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1788 * d10v-dis.c (print_operand):
1789 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1791 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1793 * d10v-opc.c (OPERAND_FLAG): Split into:
1794 (OPERAND_FFLAG, OPERAND_CFLAG) .
1798 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1800 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1801 field for all INSN_MACRO's.
1802 * mips16-opc.c: same
1804 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1806 * mips-opc.c (sync,cache): These are 3900 insns.
1808 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1810 sh-opc.h (sh_table): Remove ftst/nan.
1812 start-sanitize-cygnus
1813 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
1815 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1816 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1818 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1822 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
1824 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1825 Add tx49 insns and configury.
1828 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1830 * mips-opc.c (ffc, ffs): Fix mask.
1832 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1834 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1837 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1839 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1840 start-sanitize-cygnus
1841 Added VR5400 instructions.
1842 (N5): New cpu-id macro.
1844 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1846 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1848 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1849 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1851 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1853 * v850-dis.c (disassemble): Replace // with /* ... */
1855 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1857 * sparc-opc.c: Add wr & rd for v9a asr's.
1858 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1859 (v9a_asr_reg_names): New variable.
1860 Patch from David Miller <davem@vger.rutgers.edu>.
1862 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1864 * sparc-opc.c (v9notv9a): New insn type.
1865 (IMPDEP): Move to the end to not conflict with edge8 et al.
1866 Patch from David Miller <davem@vger.rutgers.edu>.
1868 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1870 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1872 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1874 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1876 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1878 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1879 of disassemble_info structure to determine if an overlay address
1880 has a matching symbol in low memory.
1882 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1883 new symbol_at_address_func field in disassemble_info structure.
1885 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1887 * v850-opc.c (extract_d22): Use signed arithmatic.
1889 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1891 * mips-opc.c: Three op mult is not an ISA insn.
1893 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1895 * mips-opc.c: Fix formatting.
1897 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1899 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1900 than assuming that char is signed. Explicitly sign extend 16 bit
1901 values, rather than assuming that short is 16 bits.
1902 (OP_sI, OP_J, OP_DIR): Likewise.
1904 start-sanitize-v850e
1905 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1907 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1911 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1913 * v850-opc.c: Fix typo in comment.
1915 * v850-dis.c (disassemble): Add test of processor type when
1916 determining opcodes.
1918 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1920 * configure.in: Use a diversion to set enable_shared before the
1921 arguments are parsed.
1922 * configure: Rebuild.
1924 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1926 * m68k-opc.c (TBL1): Use ! rather than `.
1927 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1929 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1931 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1933 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1935 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1938 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1939 * aclocal.m4: Rebuild with new libtool.
1940 * configure: Rebuild.
1942 start-sanitize-v850e
1943 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1945 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1948 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1950 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1952 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1954 * v850-opc.c (v850_opcodes): Further rearrangements.
1956 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1958 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1960 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1962 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1965 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1967 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1969 * mips16-opc.c: Added mips16 sdbbp.
1972 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1974 * v850-opc.c: Initialise processors field of v850_opcode structure.
1976 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1978 Merge changes from Martin Hunt:
1980 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1982 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1983 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1984 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1986 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1988 * d30v-dis.c (print_insn): First operand of d*i (delayed
1989 branch) instructions is relative.
1991 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1992 (d30v_operand_table): Add IMM6S3 type.
1993 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1995 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1996 and cmp instructions.
1998 * d30v-opc.c: Correct entries for repeat*, and sat*.
1999 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
2000 types. Correct several formats.
2002 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
2004 * d30v-opc.c (pre_defined_registers): Change control registers.
2006 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
2007 SHORT_C2. Manual was incorrect.
2009 * d30v-dis.c (lookup_opcode): Return value now indicates
2010 if an opcode has a short and a long form. Used for deciding
2011 to append a ".s" or ".l".
2012 (print_insn): Append a ".s" to an instruction if it is
2013 the short form and ".l" if it is a long form. Do not append
2014 anything if the instruction has only one possible size.
2016 * d30v-opc.c: Change mulx2h to require an even register.
2017 New form: SHORT_A2; a SHORT_A form that needs an even
2018 register as the first operand.
2020 * d30v-dis.c (print_insn_d30v): Fix problem where the last
2021 instruction was not being disassembled if there were an odd
2022 number of instructions.
2024 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
2026 start-sanitize-v850e
2027 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
2029 * v850-dis.c (disassemble): Improved display of register lists.
2032 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
2034 * sparc-opc.c (sparc_opcodes): Fix assembler args to
2035 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
2036 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
2037 fandnot1s, fandnot2s.
2039 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
2041 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
2043 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
2045 * cgen-asm.c (cgen_parse_address): New argument resultp.
2046 All callers updated.
2047 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
2049 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
2051 * mn10200-dis.c (disassemble): PC relative instructions are
2052 relative to the next instruction, not the current instruction.
2054 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
2056 * v850-dis.c (disassemble): Only signed extend values that are not
2057 returned by extract functions.
2058 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
2060 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
2062 * v850-opc.c: Update comments. Remove use of
2063 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
2065 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
2067 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
2069 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
2071 * configure: Rebuilt with latest devo autoconf for NT support.
2073 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
2075 * v850-dis.c (disassemble): Use curly brace syntax for register
2078 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
2079 where r0 is being used as a destination register.
2081 start-sanitize-v850e
2082 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
2084 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
2087 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
2089 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
2090 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
2091 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
2092 Add insns to access SGR and DBR.
2093 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
2095 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
2097 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
2099 start-sanitize-v850e
2100 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
2102 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
2103 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
2106 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2108 * configure (cgen_files): Add support for v850e target.
2109 * configure.in (cgen_files): Add support for v850e target.
2111 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2113 * configure (cgen_files): Add support for v850ea target.
2114 * configure.in (cgen_files): Add support for v850ea target.
2117 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
2119 * configure.in (bfd_arc_arch): Add.
2120 * configure: Rebuild.
2121 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
2122 * Makefile.in: Rebuild.
2123 * arc-dis.c, arc-opc.c: New files.
2124 * disassemble.c (ARCH_all): Define ARCH_arc.
2125 (disassembler): Add ARC support.
2127 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
2129 start-sanitize-v850e
2130 * v850-dis.c (disassemble): Add support for v850EA instructions.
2132 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
2133 (v850_opcodes): Add v850EA instructions.
2135 * v850-dis.c (disassemble): Add support for v850E instructions.
2137 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
2138 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
2139 insert_spe, extract_spe): New Functions.
2140 (v850_opcodes): Add v850E instructions.
2143 * v850-opc.c: Reorganised and re-layed out to improve readability
2146 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
2148 * configure: Rebuild with autoconf 2.12.1.
2150 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
2152 * aclocal.m4, configure: Rebuild with new automake patches.
2154 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
2156 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
2157 * acinclude.m4: Just include acinclude.m4 from BFD.
2158 * aclocal.m4, configure: Rebuild.
2160 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
2162 * Makefile.am: New file, based on old Makefile.in.
2163 * acconfig.h: New file.
2164 * acinclude.m4: New file.
2165 * stamp-h.in: New file.
2166 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
2167 Removed shared library handling; now handled by libtool. Replace
2168 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
2169 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
2170 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
2171 handling in AC_OUTPUT.
2172 * dep-in.sed: Change .o to .lo.
2173 * Makefile.in: Now built with automake.
2174 * aclocal.m4: Now built with aclocal.
2175 * config.in, configure: Rebuild.
2177 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
2179 * mips-opc.c: Fix typo/thinko in "eret" instruction.
2181 start-sanitize-r5900
2182 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
2184 * mips-opc.c: Fix coding of mtsa.
2187 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
2189 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2191 * sparc-dis.c (sorted_opcodes): New static local.
2192 (struct opcode_hash): `opcode' is pointer to const element.
2193 (build_hash): First arg is now table of sorted pointers.
2194 (print_insn_sparc): Sort opcodes by sorting table of pointers.
2195 (compare_opcodes): Update.
2197 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
2199 * cgen-opc.c: #include <ctype.h>.
2200 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2201 Handle case insensitive hashing.
2202 (hash_keyword_value): Change type of `value' to unsigned int.
2204 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2206 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2207 precision FP, mark it as such. Likewise for double precision
2208 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2210 start-sanitize-r5900
2211 (mips_builtin_opcodes): Remove non-existant r5900 instructions
2214 start-sanitize-r5900
2215 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
2217 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
2218 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
2221 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2223 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2225 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2226 nesting depth when all the macros are expanded.
2228 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2230 * sparc-opc.c: The fcmp v9a instructions take an integer register
2231 as a destination, not a floating point register. From Christian
2232 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2234 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2236 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2237 syntax. From Roman Hodek
2238 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2240 * i386-dis.c (twobyte_has_modrm): Fix pand.
2242 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2244 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2246 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2248 * arm-dis.c: Add prototypes for arm_decode_shift and
2251 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2253 * mips-opc.c: Add r3900 insns.
2255 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2257 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2258 print delay slot instructions on the same line. When using a PC
2259 relative load, add a comment with the value being loaded if it can
2262 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2264 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2265 to pushS/popS for segment regs and byte constant so that
2266 pushw/popw printed when in 16 bit data mode.
2268 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2269 print cbtw, cwtd in 16 bit data mode.
2270 * i386-dis.c (putop): extra case W to support above.
2272 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2273 address size prefix in 16 bit address mode.
2275 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2277 * sh-dis.c: Reindent. Rename local variable fprintf to
2280 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2282 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2284 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2286 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2288 * mips16-opc.c (mip16_opcodes): same.
2290 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2292 * m68k-opc.c (moveb): Change $d to %d.
2294 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2296 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2297 (twobyte_has_modrm): Likewise.
2299 (OP_MMX, OP_EM, OP_MS): New static functions.
2301 * i386-dis.c: Revert patch of April 4. The output now matches
2304 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2306 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2309 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2311 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2313 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2315 * Makefile.in (install): Depend upon installdirs.
2316 (installdirs): New target.
2318 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2320 From Thomas Graichen <graichen@rzpd.de>:
2321 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2322 * configure: Rebuild.
2324 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2326 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2327 Delete string{,s}.h support.
2329 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2331 * cgen-asm.c (cgen_parse_operand_fn): New global.
2332 (cgen_parse_{{,un}signed_integer,address}): Update call to
2333 cgen_parse_operand_fn.
2334 (cgen_init_parse_operand): New function.
2335 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2336 from cgen_asm_init_parse.
2337 (m32r_cgen_assemble_insn): New operand `errmsg'.
2338 Delete call to as_bad, return error message to caller.
2339 (m32r_cgen_asm_hash_keywords): #if 0 out.
2341 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2343 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2345 [case 'J']: Fix typo in register name.
2347 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2349 * configure.in: Substitute SHLIB_LIBS.
2350 * configure: Rebuild.
2351 * Makefile.in (SHLIB_LIBS): New variable.
2352 ($(SHLIB)): Use $(SHLIB_LIBS).
2354 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2356 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2358 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2360 * disassemble.c (disassembler): Handle m32r.
2362 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2364 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2365 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2366 * Makefile.in (CFILES): Add them.
2367 (ALL_MACHINES): Add them.
2368 (dependencies): Regenerate.
2369 * configure.in (cgen_files): New variable.
2370 (bfd_m32r_arch): Add entry.
2371 * configure: Regenerate.
2373 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2375 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2376 * configure: Rebuild.
2378 * Makefile.in: Rebuild dependencies.
2380 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2382 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2385 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2387 * Branched binutils 2.8.
2389 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2391 * m10200-dis.c: Rename from mn10200-dis.c.
2392 * m10200-opc.c: Rename from mn10200-opc.c.
2393 * m10300-dis.c: Rename from mn10300-dis.c
2394 * m10300-opc.c: Rename from mn10300-opc.c.
2395 * Makefile.in: Update accordingly.
2397 * mips16-opc.c: Add mul and dmul macros.
2399 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2401 * makefile.vms: Update CFLAGS, add clean target.
2403 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2405 * mips-opc.c: Add "wait". From Ralf Baechle
2406 <ralf@gnu.ai.mit.edu>.
2408 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2409 * configure, config.in: Rebuild.
2410 * sysdep.h: Include <stdlib.h> if it exists.
2411 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2413 * Makefile.in: Rebuild dependencies.
2415 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2417 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2418 Andrew Bray <andy@madhouse.demon.co.uk>.
2420 * mips-opc.c: Add cast when setting mips_opcodes.
2422 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2424 * v850-dis.c (disassemble): Fix sign extension problem.
2425 * v850-opc.c (extract_d*): Fix sign extension problems to make
2426 disassembly calculate branch offsets correctly.
2428 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2430 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2432 * mips-opc.c: Add dctr and dctw.
2434 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2436 * d30v-dis.c (print_insn): Change the way signed constants
2439 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2441 * Makefile.in (BFD_H): New variable.
2442 (HFILES): New variable.
2443 (CFILES): Add all C files.
2444 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2445 Delete old dependencies, and build new ones.
2446 * dep-in.sed: New file.
2448 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2450 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2452 start-sanitize-coldfire
2453 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
2455 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
2458 end-sanitize-coldfire
2459 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2461 * mn10200-opc.c: Change "trap" to "syscall".
2462 * mn10300-opc.c: Add new "syscall" instruction.
2464 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2466 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2467 mulul insns on the coldfire.
2469 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2471 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2472 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2473 (print_insn_little_arm): Likewise.
2475 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2477 Based on patches from H.J. Lu <hjl@lucon.org>:
2478 * i386-dis.c (fetch_data): Add prototype.
2479 * m68k-dis.c (fetch_data): Add prototype.
2480 (dummy_print_address): Add prototype. Make static.
2481 * ppc-opc.c (valid_bo): Add prototype.
2482 * sparc-dis.c (build_hash_table): Add prototype.
2483 (is_delayed_branch, compute_arch_mask): Add prototypes.
2484 (print_insn_sparc): Make several local variables const.
2485 (compare_opcodes): Change arguments to const PTR. Add prototype.
2486 * sparc-opc.c (arg): Change name field to be const.
2487 (lookup_name, lookup_value): Add prototypes. Change table and
2488 name parameters to be const.
2489 (sparc_encode_asi): Change name parameter to be const.
2490 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2491 (sparc_encode_sparclet_cpreg): Likewise.
2492 (sparc_decode_asi): Change return type to be const.
2493 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2494 (sparc_decode_sparclet_cpreg): Likewise.
2496 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2498 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2499 Solaris doesn't like the combined options, and the -f is
2501 (stamp-tshlink, install): Likewise.
2503 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2505 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2508 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2510 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2512 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2514 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2517 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2519 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2521 start-sanitize-tic80
2522 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2524 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2526 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2528 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2531 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2533 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2534 floatformat_to_double to make portable.
2535 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2538 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2540 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2541 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2543 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2545 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2546 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2548 start-sanitize-tic80
2549 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2551 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2552 (OFF_SL_BR_SCALED): ... to this, and added the flag
2553 TIC80_OPERAND_BASEREL to the flags word.
2554 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2558 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2560 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2561 Change mips_opcodes from const array to a pointer,
2562 and change bfd_mips_num_opcodes from const int to int,
2563 so that we can increase the size of the mips opcodes table
2566 start-sanitize-tic80
2567 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2569 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2570 store BITNUM values in the table in one's complement form
2571 to match behavior when assembler is given a raw numeric
2572 value for a BITNUM operand.
2573 * tic80-dis.c (print_operand_bitnum): Ditto.
2576 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2578 * d30v-opc.c: Removed references to FLAG_X.
2580 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2582 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2584 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2586 * Makefile.in: Added d30v object files.
2587 * configure: (bfd_d30v_arch) Rebuilt.
2588 * configure.in: (bfd_d30v_arch) Added new case.
2589 * d30v-dis.c: New file.
2590 * d30v-opc.c: New file.
2591 * disassemble.c (disassembler) Add entry for d30v.
2593 start-sanitize-tic80
2594 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2596 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2597 representations for the floating point BITNUM values.
2599 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2601 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2602 in the table in one's complement form, as they appear in the
2604 (tic80_symbol_to_value): Use macros to access predefined
2606 (tic80_value_to_symbol): Ditto.
2607 (tic80_next_predefined_symbol): New function.
2608 * tic80-dis.c (print_operand_bitnum): Remove code that did
2609 one's complement for BITNUM values.
2612 start-sanitize-r5900
2613 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
2615 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
2618 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2620 * makefile.vms: Remove 8 bit characters. Update to latest
2623 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2625 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2627 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2629 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2630 (IMM24_PCREL): Likewise.
2632 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2634 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2635 address for an extended PC relative instruction that is not a
2638 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2640 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2643 start-sanitize-tic80
2644 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2646 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2647 (tic80_opcodes): Sort entries so that long immediate forms
2648 come after short immediate forms, making it easier for
2649 assembler to select the right one for a given operand.
2652 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2654 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2656 (print_insn_mips16): Likewise.
2658 start-sanitize-r5900
2659 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
2661 * mips-opc.c: add r5900.
2664 start-sanitize-tic80
2665 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2667 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2668 a symbol class that restricts translation to just that
2669 class (general register, condition code, etc).
2671 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2673 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2674 and REG_DEST_E for register operands that have to be
2675 an even numbered register. Add REG_FPA for operands that
2676 are one of the floating point accumulator registers.
2677 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2678 (tic80_opcodes): Change entries that need even numbered
2679 register operands to use the new operand table entries.
2680 Add "or" entries that are identical to "or.tt" entries.
2683 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2685 * mips16-opc.c: Add new cases of exit instruction for
2687 * mips-dis.c (print_mips16_insn_arg): Display floating point
2688 registers in operands of exit instruction. Print `$' before
2689 register names in operands of entry and exit instructions.
2691 start-sanitize-tic80
2692 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2694 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2695 pairs for all predefined symbols recognized by the assembler.
2696 Also used by the disassembling routines.
2697 (tic80_symbol_to_value): New function.
2698 (tic80_value_to_symbol): New function.
2699 * tic80-dis.c (print_operand_control_register,
2700 print_operand_condition_code, print_operand_bitnum):
2701 Remove private tables and use tic80_value_to_symbol function.
2704 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2706 * d10v-dis.c (print_operand): Change address printing
2707 to correctly handle PC wrapping. Fixes PR11490.
2709 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2711 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2714 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2716 * mips-dis.c (print_insn_mips16): Set insn_info information.
2717 (print_mips16_insn_arg): Likewise.
2719 * mips-dis.c (print_insn_mips16): Better handling of an extend
2720 opcode followed by an instruction which can not be extended.
2722 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2724 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2725 coldfire moveb instruction to not allow an address register as
2726 destination. Although the documentation does not indicate that
2727 this is invalid, experiments uncovered unexpected behavior.
2728 Added a comment explaining the situation. Thanks to Andreas
2729 Schwab for pointing this out to me.
2731 start-sanitize-tic80
2732 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2734 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2735 entries are presorted so that entries with the same mnemonic are
2736 adjacent to each other in the table. Sort the entries for each
2737 instruction so that this is true.
2740 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2742 * m68k-dis.c: Include <libiberty.h>.
2743 (print_insn_m68k): Sort the opcode table on the most significant
2744 nibble of the opcode.
2746 start-sanitize-tic80
2747 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2749 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2750 "vsub", "vst", "xnor", and "xor" instructions.
2751 (V_a1): Renamed from V_a, msb of accumulator reg number.
2752 (V_a0): Add macro, lsb of accumulator reg number.
2754 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2756 * tic80-dis.c (print_insn_tic80): Broke excessively long
2757 function up into several smaller ones and arranged for
2758 the instruction printing function to be callable recursively
2759 to print vector instructions that have both a load and a
2760 math instruction packed into a single opcode.
2761 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2762 to explain why it comes after the other vector opcodes.
2765 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2767 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2768 move insns to handle immediate operands.
2770 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2772 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2773 fix operand mask in the "moveml" entries for the coldfire.
2775 start-sanitize-tic80
2776 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2778 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2779 New macros for building vector instruction opcodes.
2780 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2781 FMT_LI, which were unused. The field is now a flags field.
2782 Remove some opcodes that are possible, but illegal, such
2783 as long immediate instructions with doubles for immediate
2784 values. Add "vadd" and "vld" instructions.
2786 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2788 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2789 the order more logical. Move the shift alias instructions ("rotl",
2790 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2791 interspersed with the regular sr.x and sl.x instructions. Add
2792 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2793 "sub", "subu", "swcr", and "trap".
2795 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2797 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2798 (OFF_SL_PC): Renamed from OFF_SL.
2799 (OFF_SS_BR): New operand type for base relative operand.
2800 (OFF_SL_BR): New operand type for base relative operand.
2801 (REG_BASE): New operand type for base register operand.
2802 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2803 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2804 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2806 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2807 10 char field, padded with spaces on rhs, rather than a string
2808 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2809 than old TIC80_OPERAND_RELATIVE. Add support for new
2810 TIC80_OPERAND_BASEREL flag bit.
2812 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2814 * tic80-dis.c (print_insn_tic80): Print floating point operands
2816 * tic80-opc.c (SPFI): Add single precision floating point
2817 immediate operand type.
2818 (ROTATE): Add rotate operand type for shifts.
2819 (ENDMASK): Add for shifts.
2820 (n): Macro for the 'n' bit.
2821 (i): Macro for the 'i' bit.
2822 (PD): Macro for the 'PD' field.
2823 (P2): Macro for the 'P2' field.
2824 (P1): Macro for the 'P1' field.
2825 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2829 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2831 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2832 adding in current address for pc-relative operands.
2834 start-sanitize-tic80
2835 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2837 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2838 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2839 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2840 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2841 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2842 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2843 (REG_SCALED, LSI_SCALED): New operand types.
2844 (E): New macro for 'E' bit at bit 27.
2845 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2846 opcodes, including the various size flavors (b,h,w,d) for
2847 the direct load and store instructions.
2849 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2851 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2853 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2854 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2855 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2856 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2857 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2858 masks with "MASK_* & ~M_*" to get the M bit reset.
2859 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2861 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2863 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2864 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2865 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2867 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2868 CC, SICR, and LICR table entries.
2869 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2870 "bcnd", and "brcr" opcodes.
2873 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2875 * ppc-opc.c (powerpc_operands): Make comment match the
2876 actual fields (no shift field).
2877 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2878 start-sanitize-tic80
2879 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2880 partial implementation, work in progress.
2881 * tic80-opc.c (tic80_operands): Begin construction operands table.
2882 (tic80_opcodes): Continue populating opcodes table and start
2883 filling in the operand indices.
2884 (tic80_num_opcodes): Add this.
2887 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2889 * m68k-opc.c: Add #B case for moveq.
2891 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2893 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2894 before they are used.
2896 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2898 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2899 for "breakpoint" instruction.
2901 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2903 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2904 (dep): Use ALL_CFLAGS rather than CFLAGS.
2906 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2908 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2911 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2913 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2914 start-sanitize-tic80
2915 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2918 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2920 * mips16-opc.c: Add "abs".
2922 start-sanitize-tic80
2923 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2925 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2926 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2927 (disassembler): Add bfd_arch_tic80 support to set disassemble
2928 to print_insn_tic80.
2929 * tic80-dis.c (print_insn_tic80): Add stub.
2931 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2933 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2934 * configure: Regenerate with autoconf.
2935 * tic80-dis.c: Add file.
2936 * tic80-opc.c: Add file.
2939 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2941 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2943 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2945 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2946 (mn10200_opcodes): Use it for some logicals and btst insns.
2947 Add "break" and "trap" instructions.
2949 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2951 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2953 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2955 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2956 relative load or add now depends upon whether the instruction is
2959 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2961 * mn10200-dis.c: Finish writing disassembler.
2962 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2963 Fix mask for "jmp (an)".
2965 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2966 handle endianness issues for mn10300.
2968 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2970 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2972 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2973 instruction. Fix opcode field for "movb (imm24),dn".
2975 * mn10200-opc.c (mn10200_operands): Fix insertion position
2978 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2980 * mn10200-opc.c: Create mn10200 opcode table.
2981 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2982 but moving along nicely.
2984 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2986 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2988 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2990 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2991 specifiers for fmovem* instructions.
2993 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2995 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2997 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2999 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
3002 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
3004 * mn10300-opc.c: Add some comments explaining the various
3007 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
3009 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3011 * m68k-dis.c (print_insn_arg): Handle new < and > operand
3014 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3015 operand specifiers in fmovm* instructions.
3017 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
3019 * ppc-opc.c (insert_li): Give an error if the offset has the two
3020 least significant bits set.
3022 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
3024 * mips-dis.c (print_insn_mips16): Separate the instruction from
3025 the arguments with a tab, not a space.
3027 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
3029 * mn10300-dis.c (disasemble): Finish conversion to '$' as
3032 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
3035 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
3037 * configure: Rebuild with autoconf 2.12.
3039 Add support for mips16 (16 bit MIPS implementation):
3040 * mips16-opc.c: New file.
3041 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
3042 (mips16_reg_names): New static array.
3043 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
3044 after seeing a 16 bit symbol.
3045 (print_insn_little_mips): Likewise.
3046 (print_insn_mips16): New static function.
3047 (print_mips16_insn_arg): New static function.
3048 * mips-opc.c: Add jalx instruction.
3049 * Makefile.in (mips16-opc.o): New target.
3050 * configure.in: Use mips16-opc.o for bfd_mips_arch.
3051 * configure: Rebuild.
3053 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
3055 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3056 operand specifiers in *save, *restore and movem* instructions.
3058 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
3061 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
3062 register operands for immediate arithmetic, not, neg, negx, and
3063 set according to condition instructions.
3065 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
3066 specifier of the effective-address operand in immediate forms of
3067 arithmetic instructions. The specifier for the immediate operand
3068 notes how and where the constant will be stored.
3070 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
3072 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
3075 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
3078 * mn10300-dis.c (disassemble): Prefix registers with '%'.
3080 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
3082 * mn10300-dis.c (disassemble): Handle register lists.
3084 * mn10300-opc.c: Fix handling of register list operand for
3085 "call", "ret", and "rets" instructions.
3087 * mn10300-dis.c (disassemble): Print PC-relative and memory
3088 addresses symbolically if possible.
3089 * mn10300-opc.c: Distinguish between absolute memory addresses,
3090 pc-relative offsets & random immediates.
3092 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
3094 (disassemble): Handle SPLIT and EXTENDED operands.
3096 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
3098 * mn10300-dis.c: Rough cut at printing some operands.
3100 * mn10300-dis.c: Start working on disassembler support.
3101 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
3103 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
3105 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
3107 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3109 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
3111 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
3113 * mn10300-opc.c (mn10300_opcodes): Demand parens around
3114 register argument is calls and jmp instructions.
3116 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
3118 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
3119 getx operand. Fix opcode for mulqu imm,dn.
3121 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
3123 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
3124 in MN10300_OPERAND_SPLIT operands for how many bits
3125 appear in the basic insn word. Add IMM32_HIGH24,
3126 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
3127 (mn10300_opcodes): Use new operands as needed.
3129 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
3130 for bset, bclr, btst instructions.
3131 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
3133 * mn10300-opc.c (mn10300_operands): Remove many redundant
3134 operands. Update opcode table as appropriate.
3135 (IMM32): Add MN10300_OPERAND_SPLIT flag.
3136 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
3138 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
3140 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
3141 operands (for indexed load/stores). Fix bitpos for DI
3142 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
3143 few instructions that insert immediates/displacements in the
3144 middle of the instruction. Add IMM8E for 8 bit immediate in
3145 the extended part of an instruction.
3146 (mn10300_operands): Use new opcodes as appropriate.
3148 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3150 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
3151 sequential so the assembler never parallelizes it with
3154 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
3156 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
3157 a data/address register that appears in register field 0
3158 and register field 1.
3159 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
3161 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
3163 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
3164 standard disassembly.
3166 * alpha-opc.c (alpha_operands): Rearrange flags slot.
3167 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
3168 Recategorize PALcode instructions.
3170 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
3172 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
3174 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
3176 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
3177 there are no operand types.
3179 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
3181 * v850-opc.c (D9_RELAX): Renamed from D9, all references
3183 (v850_operands): Make sure D22 immediately follows D9_RELAX.
3185 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
3187 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
3189 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
3191 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
3192 and sst.w instructions.
3194 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
3197 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
3199 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
3202 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
3204 * ppc-opc.c (PPCPWR2): Define.
3205 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
3208 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
3210 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
3211 field for movhu instruction.
3213 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
3214 cast value to "long" not "signed long" to keep hpux10
3217 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
3219 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3222 * mn10300-opc.c (FMT*): Remove definitions.
3224 * mn10300-opc.c (mn10300_opcodes): Fix destination register
3225 for shift-by-register opcodes.
3227 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3228 into [AD][MN][01] for encoding the position of the register
3231 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
3233 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3234 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3236 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
3238 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3239 Fix various typos. Add "PAREN" operand.
3240 (MEM, MEM2): Define.
3241 (mn10300_opcodes): Surround all memory addresses with "PAREN"
3242 operands. Fix several typos.
3244 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3247 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
3249 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3250 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3252 (mn10300_opcodes): Break opcode format out into its own field.
3253 Update many operand fields to deal with signed vs unsigned
3254 issues. Fix one or two typos in the "mov" instruction
3255 opcode, mask and/or operand fields.
3257 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3259 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3260 m68851 wasn't reset.
3262 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3264 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3265 all opcodes. Very rough cut at operands for all opcodes.
3267 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3270 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3272 * mn10200-opc.c, mn10300-opc.c: New files.
3273 * mn10200-dis.c, mn10300-dis.c: New files.
3274 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3275 * disassemble.c: Break mn10x00 support into 10200 and 10300
3277 * configure.in: Likewise.
3278 * configure: Rebuilt.
3280 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3282 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3284 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3286 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3288 * disassemble (ARCH_mn10x00): Define.
3289 (disassembler): Handle bfd_arch_mn10x00.
3290 * configure.in: Recognize bfd_mn10x00_arch.
3291 * configure: Rebuilt.
3293 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3295 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3296 accordingly. Don't declare functions using op_rtn.
3298 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3300 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3301 params to be more standard.
3302 * (disassemble): Print absolute addresses and symbolic names for
3303 branch and jump targets.
3304 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3306 * (v850_opcodes): Add breakpoint insn.
3308 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3310 * m68k-opc.c: Move the fmovemx data register cases before the
3311 other cases, so that they get recognized before the data register
3312 does gets treated as a degenerate register list.
3314 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3316 * mips-opc.c: Add a case for "div" and "divu" with two registers
3317 and a destination of $0.
3319 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3321 * mips-dis.c (print_insn_arg): Add prototype.
3322 (_print_insn_mips): Ditto.
3324 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3326 * mips-dis.c (print_insn_arg): Print condition code registers as
3329 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3331 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3333 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3335 * v850-dis.c (disassemble): Make static. Provide prototype.
3337 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3339 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3342 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3344 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3345 ']' characters into the output stream.
3346 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3347 Add "memop" field to all opcodes (for the disassembler).
3348 Reorder opcodes so that "nop" comes before "mov" and "jr"
3349 comes before "jarl".
3351 * v850-dis.c (print_insn_v850): Fix typo in last change.
3353 * v850-dis.c (print_insn_v850): Properly handle disassembling
3354 a two byte insn at the end of a memory region when the memory
3355 region's size is only two byte aligned.
3357 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3359 * v850-dis.c (v850_reg_names): Define.
3360 (v850_sreg_names, v850_cc_names): Likewise.
3361 (disassemble): Very rough cut at printing operands (unformatted).
3363 * v850-opc.c (BOP_MASK): Fix.
3364 (v850_opcodes): Fix mask for jarl and jr.
3366 * v850-dis.c: New file. Skeleton for disassembler support.
3367 * Makefile.in Remove v850 references, they're not needed here.
3368 * configure.in: Add v850-dis.o when building v850 toolchains.
3369 * configure: Rebuilt.
3370 * disassemble.c (disassembler): Call v850 disassembler.
3372 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3373 (insert_d8_6, extract_d8_6): New functions.
3374 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3375 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3377 (IF4A, IF4B): Use "D7" instead of "D7S".
3378 (IF4C, IF4D): Use "D8_7" instead of "D8".
3379 (IF4E, IF4F): New. Use "D8_6".
3380 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3381 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3383 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3384 (v850_operands): Change D16 to D16_15, use special insert/extract
3385 routines. New new D16 that uses the generic insert/extract code.
3386 (IF7A, IF7B): Use D16_15.
3387 (IF7C, IF7D): New. Use D16.
3388 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3390 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3391 message. Issue an error if the branch offset is odd.
3393 * v850-opc.c: Add notes about needing special insert/extract
3394 for all the load/store insns, except "ld.b" and "st.b".
3396 * v850-opc.c (insert_d22, extract_d22): New functions.
3397 (v850_operands): Use insert_d22 and extract_d22 for
3399 (insert_d9): Fix range check.
3401 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3403 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3404 and set bits field to D9 and D22 operands.
3406 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3408 * v850-opc.c (v850_operands): Define SR2 operand.
3409 (v850_opcodes): "ldsr" uses R1,SR2.
3411 * v850-opc.c (v850_opcodes): Fix opcode specs for
3412 sld.w, sst.b, sst.h, sst.w, and nop.
3414 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3416 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3417 end of the opcode table.
3419 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3421 * d10v-opc.c (pre_defined_registers): Added register pairs,
3422 "r0-r1", "r2-r3", etc.
3424 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3426 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3427 Create I16U for an unsigned 16bit mmediate operand.
3428 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3430 * v850-opc.c (v850_operands): Define EP operand.
3431 (IF4A, IF4B, IF4C, IF4D): Use EP.
3433 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3434 with immediate operand, "movhi". Tweak "ldsr".
3436 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3437 correct. Get sld.[bhw] and sst.[bhw] closer.
3439 * v850-opc.c (v850_operands): "not" is a two byte insn
3441 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3443 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3445 * v850-opc.c (two): Get order of words correct.
3447 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3449 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3450 register source and destination operands.
3451 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3453 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3454 same thinko in "trap" opcode.
3456 * v850-opc.c (v850_opcodes): Add initializer for size field
3459 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3460 Add D8 for 8-bit unsigned field in short load/store insns.
3461 (IF4A, IF4D): These both need two registers.
3462 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3463 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3464 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3465 for "ldsr" and "stsr".
3466 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3469 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3470 short store word (sst.w).
3472 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3474 * v850-opc.c (v850_operands): Added insert and extract fields,
3475 pointers to functions that handle unusual operand encodings.
3477 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3479 * v850-opc.c (v850_opcodes): Enable "trap".
3481 * v850-opc.c (v850_opcodes): Fix order of displacement
3482 and register for "set1", "clr1", "not1", and "tst1".
3484 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3486 * v850-opc.c (v850_operands): Add "B3" support.
3487 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3490 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3492 * v850-opc.c: Close unterminated comment.
3494 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3496 * v850-opc.c (v850_operands): Add flags field.
3497 (v850_opcodes): add move opcodes.
3499 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3501 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3502 * configure: (bfd_v850v_arch) Add new case.
3503 * configure.in: (bfd_v850_arch) Add new case.
3504 * v850-opc.c: New file.
3506 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3508 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3510 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3512 * d10v-opc.c: Add additional information to the opcode
3513 table to help determinine which instructions can be done
3516 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3518 * mpw-make.sed: Update editing of include pathnames to be
3521 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3523 * arm-opc.h: Added "bx" instruction definition.
3525 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3527 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3529 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3531 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3533 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3535 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3537 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3539 * makefile.vms: Update for alpha-opc changes.
3541 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3543 * i386-dis.c (print_insn_i386): Actually return the correct value.
3544 (ONE, OP_ONE): #ifdef out; not used.
3546 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3548 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3549 Changed subi operand type to treat 0 as 16.
3551 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3553 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3556 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3558 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3559 memory transfer instructions. Add new format string entries %h and %s.
3560 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3563 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3565 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3566 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3568 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3570 * alpha-dis.c (print_insn_alpha_osf): Remove.
3571 (print_insn_alpha_vms): Remove.
3572 (print_insn_alpha): Make globally visible. Chose the register
3573 names based on info->flavour.
3574 * disassemble.c: Always return print_insn_alpha for the alpha.
3576 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3578 * d10v-dis.c (dis_long): Handle unknown opcodes.
3580 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3582 * d10v-opc.c: Changes to support signed and unsigned numbers.
3583 All instructions with the same name that have long and short forms
3584 now end in ".l" or ".s". Divs added.
3585 * d10v-dis.c: Changes to support signed and unsigned numbers.
3587 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3589 * d10v-dis.c: Change all functions to use info->print_address_func.
3591 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3593 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3594 move ccr/sr insns more strict so that the disassembler only
3595 selects them when the addressing mode is data register.
3597 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3598 * d10v-opc.c (pre_defined_registers): Declare.
3599 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3600 to pick a better name for the registers.
3602 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3604 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3605 operands for fexpand and fpmerge. From Christian Kuehnke
3606 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3608 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3610 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3611 print routine. Take new regnames and cpumask arguments.
3612 Kill the environment variable nonsense.
3613 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3614 (print_insn_alpha_vms): New function. Do VMS style regnames.
3615 * disassemble.c (disassembler): Test bfd flavour to pick
3616 between OSF and VMS routines. Default to OSF.
3618 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3620 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3621 * configure: Rebuild.
3622 * Makefile.in (install): Use @INSTALL_SHLIB@.
3624 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3626 * configure: (bfd_d10v_arch) Add new case.
3627 * configure.in: (bfd_d10v_arch) Add new case.
3628 * d10v-dis.c: New file.
3629 * d10v-opc.c: New file.
3630 * disassemble.c (disassembler) Add entry for d10v.
3632 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3634 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3635 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3637 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3639 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3640 distinguish between variants of the instruction set.
3641 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3642 distinguish between variants of the instruction set.
3644 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3646 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3647 the 8086 instruction set.
3648 * i386-dis.c: General cleanups. Make most things static. Add
3649 prototypes. Get rid of static variables aflags and dflags. Pass
3650 them as args (to almost everything).
3652 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3654 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3656 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3658 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3659 if the next arg is marked with SRC_IN_DST. Gross.
3661 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3662 we're looking for and find EXR.
3664 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3665 if we're looking for KBIT and we don't find it.
3667 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3670 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3671 3bit immediate operands.
3673 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3675 * Released binutils 2.7.
3677 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3678 <kkaempf@progis.ac-net.de>.
3680 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3682 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3684 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3686 * sparc-dis.c (print_insn_sparclite): New routine to print
3687 sparclite instructions.
3689 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3691 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3693 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3695 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3696 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3697 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3699 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3701 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3702 Use autoconf-set values.
3703 (docdir, oldincludedir): Removed.
3704 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3706 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3708 * alpha-opc.c: New file.
3709 * alpha-opc.h: Remove.
3710 * alpha-dis.c: Complete rewrite to use new opcode table.
3711 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3712 * configure: Rebuild with autoconf 2.10.
3713 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3714 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3716 (alpha-opc.o): New target.
3718 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3720 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3721 Set imm_added_to_rs1 even if the source and destination register
3724 * sparc-opc.c: Add some two operand forms of the wr instruction.
3726 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3728 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3731 * disassemble.c (disassembler): Handle H8/S.
3732 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3734 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3736 * sparc-opc.c: Add beq/teq as aliases for be/te.
3738 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3739 <sergei@msil.sps.mot.com>.
3741 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3743 * makefile.vms: New file.
3745 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3747 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3749 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3752 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3754 * i386-dis.c (OP_OFF): Call append_prefix.
3756 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3758 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3759 unsigned long to silence a warning from the Solaris PowerPC
3762 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3764 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3766 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3768 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3770 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3771 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3772 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3773 cpush, cpusha, cpull sparclet insns.
3775 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3777 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3779 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3781 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3782 Set F_FLOAT on other floating point instructions.
3784 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3786 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3788 (powerpc_opcodes): Add 860/821 specific SPRs.
3790 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3792 * configure.in: Permit --enable-shared to specify a list of
3793 directories. Set and substitute BFD_PICLIST.
3794 * configure: Rebuild.
3795 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3796 uses. Set to @BFD_PICLIST@.
3798 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3800 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3801 not "abs", which may be needed for the absolute in something
3802 like btst #0,@10:8. Print L_3 immediates separately from other
3803 immediates. Change ABSMOV reference to ABS8MEM.
3805 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3807 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3808 (current_arch_mask): New static global.
3809 (compute_arch_mask): New static function.
3810 (print_insn_sparc): Delete sparc_v9_p. New static local
3811 current_mach. Resort opcode table if current_mach changes.
3812 Generalize "insn not supported" test.
3813 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3814 Delete test for v9/!v9.
3815 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3817 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3818 (brfcx): Renamed to FBRX.
3819 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3820 coprocessor mnemonics are not supported on the sparclet).
3821 (condf): Renamed to CONDF.
3822 (SLCBCC2): Delete F_ALIAS flag.
3824 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3826 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3827 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3829 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3831 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3832 that the shared library version number is set correctly.
3834 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3836 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3837 Miles Bader <miles@gnu.ai.mit.edu>.
3838 * configure: Rebuild.
3840 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3842 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3845 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3847 * configure: Rebuild with autoconf 2.8.
3849 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3851 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3852 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3854 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3856 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3857 since they appear as targets in Makefile.in.
3858 * configure: Rebuild.
3860 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3862 * mpw-make.sed: Edit out shared library support bits.
3864 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3866 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3867 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3868 (sparc_opcodes): Add sparclet insns.
3869 (sparclet_cpreg_table): New static local.
3870 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3871 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3873 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3875 * i386-dis.c (index16): New static variable.
3876 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3878 (OP_indirE): Return result of OP_E.
3879 (OP_E): Check for 16 bit addressing mode, and disassemble
3880 correctly. Optimised 32 bit case a little. Don't print
3881 "(base,index,scale)" when sib specifies only an offset.
3883 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3885 * configure.in: Set and substitute SHLIB_DEP.
3886 * configure: Rebuild.
3887 * Makefile.in (SHLIB_DEP): New variable.
3888 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3889 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3890 COMMON_SHLIB, add them to piclist with appropriate modifications.
3891 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3892 here: just use piclist.
3894 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3896 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3897 (print_insn_sparc): Rewrite v9/not-v9 tests.
3898 (compare_opcodes): Likewise.
3899 * sparc-opc.c (MASK_<ARCH>): Define.
3900 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3901 (sparclet,v6notv9): Define.
3902 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3903 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3905 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3907 * configure.in: Call AC_PROG_CC before configure.host.
3908 * configure: Rebuild.
3910 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3912 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3914 * i386-dis.c (onebyte_has_modrm): New static array.
3915 (twobyte_has_modrm): New static array.
3916 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3918 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3920 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3923 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3925 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3928 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3930 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3931 m68010up, not just m68020up | cpu32.
3933 * Makefile.in (SONAME): New variable.
3934 ($(SHLINK)): Make a link to the transformed name, as well.
3935 (stamp-tshlink): New target.
3936 (install): Skip stamp-tshlink during install.
3938 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3940 * configure.in: Call AC_ARG_PROGRAM.
3941 * configure: Rebuild.
3942 * Makefile.in (program_transform_name): New variable.
3943 (install): Transform library name before installing it.
3945 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3947 * i960-dis.c (mem): Add HX dcinva instruction.
3949 Support for building as a shared library, based on patches from
3950 Alan Modra <alan@spri.levels.unisa.edu.au>:
3951 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3952 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3953 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3954 * configure: Rebuild.
3955 * Makefile.in (ALLLIBS): New variable.
3956 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3957 (COMMON_SHLIB, SHLINK): New variables.
3958 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3959 (STAGESTUFF): Remove variable.
3960 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3961 (stamp-piclist, piclist): New targets.
3962 ($(SHLIB), $(SHLINK)): New targets.
3963 ($(OFILES)): Depend upon stamp-picdir.
3964 (disassemble.o): Build twice if PICFLAG is set.
3965 (MOSTLYCLEAN): Add pic/*.o.
3966 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3967 (distclean): Remove pic and stamp-picdir.
3968 (install): Install shared libraries.
3969 (stamp-picdir): New target.
3971 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3973 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3974 Print unknown instruction as "unknown", rather than in hex.
3976 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3978 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3980 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3982 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3984 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3986 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3987 when necessary. From Ulrich Drepper
3988 <drepper@myware.rz.uni-karlsruhe.de>.
3990 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3992 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3993 sparc_num_opcodes. Update architecture enum values.
3994 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3995 (sparc_opcode_lookup_arch): New function.
3996 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3997 (sparc_opcodes): Add v9a shutdown insn.
3999 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
4001 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
4002 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
4004 (print_insn_sparc64): Deleted.
4005 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
4008 * sparc-opc.c (architecture_pname): Add v9a.
4010 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
4012 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
4013 incorrectly defined as 0x16 when it should be 0x15.
4014 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
4015 (alpha_insn_set): added cvtst and cvttq float ops. Also added
4016 excb (exception barrier) which is defined in the Alpha
4017 Architecture Handbook version 2.
4018 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
4019 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
4020 disassembled as or, for example.
4022 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
4024 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
4025 (_print_insn_mips): Change i from int to unsigned int.
4027 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
4029 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
4030 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
4032 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
4034 * i386-dis.c: Added Pentium Pro instructions.
4036 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4038 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
4041 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4043 * sh-opc.h (sh_nibble_type): Added REG_B.
4044 (sh_arg_type): Added A_REG_B.
4045 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
4047 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
4049 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
4051 * disassemble.c (disassembler): Use new bfd_big_endian macro.
4053 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
4055 * Makefile.in (distclean): Remove stamp-h. From Ronald
4056 F. Guilmette <rfg@monkeys.com>.
4058 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
4060 From David Mosberger-Tang <davidm@azstarnet.com>:
4061 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
4064 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4066 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
4067 (sh_table): Added many SH3 opcodes.
4068 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
4070 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4072 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
4073 (subco,subco.): Mark this PPC, not PPCCOM.
4075 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
4077 * configure: Rebuild with autoconf 2.7.
4079 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
4081 * configure: Rebuild with autoconf 2.6.
4083 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
4085 * configure.in: Sort list of architectures. Accept but do nothing
4086 for alliant, convex, pyramid, romp, and tahoe.
4088 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
4090 * a29k-dis.c (print_special): Change num to unsigned int.
4092 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
4094 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
4097 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
4099 * configure.in: Call AC_CHECK_PROG to find and cache AR.
4100 * configure: Rebuilt.
4102 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
4104 * configure.in: Add case for bfd_i860_arch.
4105 * configure: Rebuild.
4107 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
4109 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
4110 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
4111 (NEXTDOUBLE): Likewise.
4112 (print_insn_m68k): Don't match fmoveml if there is more than one
4113 register in the list.
4114 (print_insn_arg): Handle a place of '8' for a type of 'L'.
4116 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
4118 * m68k-opc.c: Use #W rather than #w.
4119 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
4121 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
4123 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
4124 and likewise for all the dbxx opcodes.
4126 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
4128 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
4130 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
4132 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
4133 the VR4100 specific instructions to the mips_opcodes structure.
4135 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
4137 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
4138 ugly Metrowerks bug in CW6, is fixed in CW7.
4140 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4142 * ppc-opc.c (whole file): Add flags for common/any support.
4144 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
4146 * Makefile.in (BISON): Remove macro.
4147 (FLAGS_TO_PASS): Remove BISON.
4149 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
4151 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
4153 * m68k-dis.c (print_insn_m68k): Recognize all two-word
4154 instructions that take no args by looking at the match mask.
4155 (print_insn_arg): Always print "%" before register names.
4156 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
4157 [case '_']: Don't print "@#" before address.
4158 [case 'J']: Use "%s" as format string, not register name.
4159 [case 'B']: Treat place == 'C' like 'l' and 'L'.
4161 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
4163 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
4166 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
4168 From David Mosberger-Tang <davidm@azstarnet.com>
4170 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
4171 (alpha_insn_set): added definitions for VAX floating point
4172 instructions (Unix compilers don't generate these, but handcoded
4173 assembly might still use them).
4175 * alpha-dis.c (print_insn_alpha): added support for disassembling
4176 the miscellaneous instructions in the Alpha instruction set.
4178 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
4180 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
4181 no longer create sysdep.h, sed ppc-opc.c to work around a
4182 serious Metrowerks C bug.
4183 * mpw-make.in: Remove.
4184 * mpw-make.sed: New file, used by mpw-configure to edit
4185 Makefile.in into an MPW makefile.
4187 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
4189 * Makefile.in (maintainer-clean): New synonym for realclean.
4191 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
4193 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
4194 which use '0', '1', and '2' instead. Specify the proper size for
4195 a pmove immediate operand. Correct the pmovefd patterns to be
4196 moves to a register, not from a register.
4197 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
4199 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
4201 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
4202 %psr, %wim, %tbr as F_NOTV9.
4204 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
4206 * Makefile.in (Makefile): Just rebuild Makefile when running
4208 (config.h, stamp-h): New targets.
4209 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
4210 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
4211 rebuilding config.h.
4212 * configure: Rebuild.
4214 * mips-opc.c: Change unaligned loads and stores with "t,A"
4215 operands to use "t,A(b)".
4217 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4219 * sh-dis.c (print_insn_shx): Add F_FR0 support.
4221 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4223 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4224 until 3 instead of until 2.
4226 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
4228 * Makefile.in (ALL_CFLAGS): Define.
4229 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4230 (MOSTLYCLEAN): Add config.log.
4231 (distclean): Don't remove config.log.
4232 * configure.in: Substitute HDEFINES.
4233 * configure: Rebuild.
4235 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4237 * sh-opc.h (sh_arg_type): Add F_FR0.
4238 (sh_table, case fmac): Add F_FR0 as first argument.
4240 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4242 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4244 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
4246 * sparc-dis.c: Remove all references to NO_V9.
4248 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4250 * aclocal.m4: Just include ../bfd/aclocal.m4.
4251 * configure: Rebuild.
4253 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4255 * sparc-dis.c (X_DISP19): Define.
4256 (print_insn, case 'G'): Use it.
4257 (print_insn, case 'L'): Sign extend displacement.
4259 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4261 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4262 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4263 host_makefile_frag or frags.
4264 * aclocal.m4: New file.
4265 * configure: Rebuild.
4266 * Makefile.in (INSTALL): Set to @INSTALL@.
4267 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4268 (INSTALL_DATA): Set to @INSTALL_DATA@.
4270 (AR_FLAGS): Set to rc rather than qc.
4271 (CC): Define as @CC@.
4272 (CFLAGS): Set to @CFLAGS@.
4273 (@host_makefile_frag@): Remove.
4274 (config.status): Remove dependency upon @frags@.
4276 * configure.in: ../bfd/config.bfd now just sets shell variables.
4277 Use them rather than looking through target Makefile fragments.
4278 * configure: Rebuild.
4280 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4282 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4284 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4286 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4287 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4290 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4291 (lookup_{name,value}): New functions.
4292 (prefetch_table): New static local.
4293 (sparc_{encode,decode}_prefetch): New functions.
4294 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4296 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4298 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4301 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4303 * sh-dis.c: Correct comment on first line of file.
4305 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4307 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4309 * sparc-opc.c (asi, membar): New static locals.
4310 (sparc_{encode,decode}_{asi,membar}): New functions.
4311 (sparc_opcodes, membar insn): Fix.
4312 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4313 Support decoding of membar masks.
4316 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4318 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4320 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4322 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4323 and likewise for the other branches. Add bhs as an alias for bcc,
4324 and likewise for the size variants. Add dbhs as an alias for
4327 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4329 * sh-opc.h (FP sts instructions): Update to match reality.
4331 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4333 * m68k-dis.c: (fpcr_names): Add % before all register names.
4334 (reg_names): Likewise.
4335 (print_insn_arg): Don't explicitly print % before register names.
4336 Add % before register names in static array names. In case 'r',
4337 print data registers as `@(Dn)', not `Dn@'. When printing a
4338 memory address, don't print @# before it.
4339 (print_indexed): Change base_disp and outer_disp from int to
4340 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4341 syntax. Sign extend 8 byte displacement correctly.
4342 (print_base): Print using MIT syntax. Print zpc when appropriate.
4343 Change parameter disp from int to bfd_vma.
4345 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4348 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4350 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4351 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4352 * sh-opc.h (sh_arg_type): Add new operand types.
4353 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4355 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4357 * Makefile.in (distclean): Remove generated file config.h.
4359 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4361 * Makefile.in (distclean): Remove generated file config.h.
4363 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4365 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4367 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4369 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4370 rather than numopcodes. Use m68k_opcodes rather than removed
4371 opcode function. Don't check F_ALIAS.
4372 (print_insn_arg): Change first parameter to be const char *.
4373 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4374 (m68k-opc.o): New target.
4375 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4376 * configure: Rebuild.
4378 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4380 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4381 (opcode_bits, opcode_hash_table): New variables.
4382 (opcodes_initialized): Renamed from opcodes_sorted.
4383 (build_hash_table): New function.
4384 (is_delayed_branch): Use hash table.
4385 (print_insn): Renamed from print_insn_sparc, made static.
4386 Build and use hash table. If !sparc64, ignore sparc64 insns,
4387 and vice-versa if sparc64.
4388 (print_insn_sparc, print_insn_sparc64): New functions.
4389 (compare_opcodes): Move sparc64 opcodes to end.
4390 Print commutative insns with constant second.
4391 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4393 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4395 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4396 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4397 avoids printing a delay slot in a delay slot.
4398 * sh-opc.h (sh_table): Fully bracket last entry.
4400 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4402 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4404 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4406 * configure.in: Get host_makefile_frag from ${srcdir}.
4408 * configure.in: Autoconfiscated. Check for string[s].h. Create
4409 config.h from config.in. Don't set up sysdep.h link.
4410 * sysdep.h: New file.
4411 * configure, config.in: New files, generated from configure.in.
4412 * Makefile.in: Updated to be processed autoconf-style.
4413 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4414 (Makefile): Depend on config.status.
4415 (config.status): New rule.
4416 * configure.bat: Update Makefile substitutions.
4418 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4420 * mips-opc.c (L1): Define.
4421 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4422 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4425 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4427 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4428 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4429 have multiple add units but only a single logical unit.
4431 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4432 shifted by 18, without any insertion or extraction function.
4433 (insert_cr, extract_cr): Remove.
4435 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4437 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4440 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4442 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4443 * sh-opc.h: Add copyright.
4445 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4447 * Makefile.in (crunch-m68k): Delete extra target accidentally
4448 checked in a while ago.
4450 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4452 * sh-opc.h (sh_table): Add SH3 support.
4454 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4456 * sh-opc.h: Added bsrf and braf.
4458 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4460 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4461 bogus [ls]fm{ea,fd} patterns.
4463 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4464 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4465 initialize it from memory. Make function static.
4466 (print_insn_{big,little}_arm): New functions.
4467 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4468 the correct endianness.
4470 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4472 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4475 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4477 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4478 17th, so that it builds again using GCC as the compiler.
4480 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4482 * mips-dis.c (print_insn_little_mips): Cast return value from
4483 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4484 expects an unsigned long, and that might be fewer words of
4485 argument storage (e.g., if bfd_vma is long long on a 32-bit
4487 (print_insn_big_mips): Likewise with bfd_getb32 value.
4488 (_print_insn_mips): Now static.
4490 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4492 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4493 gcc memory hog problem with initializer is fixed.
4495 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4497 Merge in support for Mac MPW as a host.
4498 (Old change descriptions retained for informational value.)
4500 * mpw-config.in (archname): Compute from the config.
4501 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4503 * mpw-config.in (target_arch): Compute from canonical target.
4504 (m68k, mips, powerpc, sparc): Add architectures.
4505 * mpw-make.in (disassemble.c.o): Add.
4506 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4508 * mpw-config.in (BFD_MACHINES): Set to a default value.
4509 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4511 * mpw-make.in (CSEARCH): Add extra-include to search path.
4513 * mpw-config.in (varargs.h): Don't create.
4514 (sysdep.h): Create using forward-include.
4515 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4517 * mpw-config.in: New file, MPW version of configure.in.
4518 * mpw-make.in: New file, MPW version of Makefile.in.
4520 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4522 * alpha-dis.c (print_insn_alpha): Put empty statement after
4525 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4527 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4528 (low_sign_extend): Likewise.
4529 (get_field): Delete unused function.
4530 (set_field, deposit_14, deposit_21): Likewise.
4532 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4534 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4537 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4539 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4541 * alpha-opc.h (OSF_ASMCODE): define
4542 print pal-code names as defined in App C of the
4543 Alpha Architecture Reference Manual
4545 * alpha-dis.c: cleaned up output
4546 print stylized code forms as defined in App A.4.3 of the
4547 Alpha Architecture Reference Manual
4549 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4551 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4553 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4556 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4558 * m68k-dis.c (opcode): New function. Returns address of opcode
4559 table entry given index, even if the opcode table was split to
4560 work around gcc bugs.
4561 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4563 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4564 (reg_names): Now const.
4565 (print_insn_arg): Arrays cacheFieldName and names now const.
4566 (print_indexed): Array scales now const.
4568 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4570 * ppc-opc.c: Sort recently added instructions by minor opcode
4571 number within major opcode number.
4573 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4575 * hppa-dis.c: Include libhppa.h.
4577 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4579 * mips-opc.c: Change dli to use M_DLI, and add dla.
4581 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4583 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4585 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4587 * mips-opc.c: Add r4650 mul instruction.
4589 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4591 * mips-opc.c: Add uld and usd macros for unaligned double load and
4594 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4596 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4597 mfdcr, mtdcr, icbt, iccci.
4599 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4601 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4602 signed char fields to shorts, more portable.
4604 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4606 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4607 char fields as signed chars, since they may have negative values.
4609 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4611 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4612 (mycroft@netbsd.org).
4614 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4616 From "Logg, Ed" <elogg@ea.com>:
4617 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4618 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4621 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4623 * ppc-opc.c: Changes based on patch from David Edelsohn
4624 <edelsohn@mhpcc.edu>.
4625 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4628 (insert_tbr): New static function.
4629 (extract_tbr): New static function.
4630 (XFXFXM_MASK, XFXM): Define.
4631 (XSPRBAT_MASK, XSPRG_MASK): Define.
4632 (powerpc_opcodes): Add instructions to access special registers by
4633 name. Add mtcr and mftbu.
4635 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4637 * mips-opc.c (P3): Define.
4638 (mips_opcodes): Add mad and madu.
4640 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4642 * configure.in: Add W65 support.
4643 * disassemble.c: Likewise.
4644 * w65-opc.h, w65-dis.c: New files.
4646 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4648 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4651 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4653 * mips-opc.c: Add dli as a synonym for li.
4655 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4657 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4658 print something for reserved opcode values, even if it won't
4661 * mips-dis.c (_print_insn_mips): When initializing, shift right
4662 and mask, to avoid sign extension problems on the Alpha.
4664 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4667 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4669 * sh-opc.h (mov.l gbr): Get direction right.
4670 * sh-dis.c (print_insn_shx): New function.
4671 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4672 print opcodes with right byte order.
4674 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4676 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4677 to avoid conflicts with getopt.
4679 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4681 * hppa-dis.c (print_insn_hppa): Read the instruction using
4682 bfd_getb32, so that it works on a little endian or 64 bit host.
4683 Remove unused local variable op.
4685 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4687 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4688 addu does not work correctly if -mips3.
4690 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4692 * a29k-dis.c (print_special): Add special register names defined
4693 on 29030, 29040 and 29050.
4694 (print_insn): Handle new operand type 'I'.
4696 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4698 * Makefile.in (INSTALL): Use top level install.sh script.
4700 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4702 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4703 that it works on a little endian host.
4705 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4707 * configure.in: Use ${config_shell} when running config.bfd.
4709 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4711 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4713 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4715 * a29k-dis.c (print_insn): Print the opcode.
4717 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4719 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4721 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4723 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4725 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4727 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4728 which store a value into memory.
4730 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4732 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4733 * arm-dis.c, arm-opc.h: New files.
4735 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4737 * Makefile.in (ns32k-dis.o): Add dependency.
4738 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4739 string, not as array of chars.
4741 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4743 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4745 * sparc-opc.c: Added sparclite extended FP operations, and
4746 versions of v9 impdep* instructions permitting specification of
4749 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4751 * i960-dis.c (reg_names): Now const.
4752 (struct sparse_tabent): New type, copied from array type in mem
4754 (ctrl): Local static array ctrl_tab now const.
4755 (cobr): Local static array cobr_tab now const.
4756 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4757 static variable mem_tab no longer explicitly initialized. Changed
4758 mem_init to const array of struct sparse_tabent.
4759 (reg): Local static variable reg_tab no longer explicitly
4760 initialized. Changed reg_init to const array of struct
4762 (ea): Local static array scale_tab now const.
4764 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4767 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4769 * configure.bat: the disassember needs to be enabled for
4770 "objdump -d" to work in djgpp.
4772 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4774 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4775 (invalid_float): Enabled general version, doesn't require running
4776 on ns32k host. Changed to take char* argument, and test for
4777 explicitly specified sizes, instead of using sizeof() on host CPU
4779 (INVALID_FLOAT): Cast first argument.
4780 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4781 list_P032, list_M032): Now const.
4782 (optlist, list_search): Made appropriate arguments now point to
4784 (print_insn_arg): Changed static array of one-character-string
4785 pointers into a static const array of characters; fixed sprintf
4786 statement accordingly.
4788 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4790 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4791 from distribution. A ns32k-dis.c from a previous distribution has
4792 been brought up to date and supports the new interface.
4794 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4796 * configure.in: add bfd_ns32k_arch target support.
4798 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4799 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4801 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4803 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4806 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4808 * h8300-dis.c, mips-dis.c: Don't use true and false.
4810 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4812 * configure.in: Change --with-targets to --enable-targets.
4814 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4816 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4817 opcodes to the first instruction with that opcode, to speed
4818 disassembly of large files. From ralphc@pyramid.com (Ralph
4821 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4823 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4825 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4827 * configure.bat: update to latest makefile.in
4829 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4831 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4832 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4833 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4834 slot insn is in a delay slot.
4835 * z8k-opc.h: (resflg): Fix patterns.
4836 * h8500-opc.h Fix CR insn patterns.
4838 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4840 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4841 "cmpl" before POWER versions, so that gas -many uses them.
4843 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4845 * disassemble.c: New file.
4846 * Makefile.in (OFILES): Add disassemble.o.
4847 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4848 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4849 binutils/configure.in.
4851 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4852 opcode being examined.
4854 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4856 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4857 (insert_ral, insert_ram, insert_ras): New functions.
4858 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4859 RAS for store with update.
4861 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4863 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4864 (edelsohn@npac.syr.edu).
4866 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4868 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4871 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4873 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4875 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4877 * ppc-opc.c (powerpc_operands): The signedp field has been
4878 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4879 instead. Add new operand SISIGNOPT.
4880 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4881 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4882 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4885 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4887 * i386-dis.c (struct private): Renamed to dis_private. `private'
4888 is a reserved word for dynix cc.
4890 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4892 * configure.in: Change error message to refer to bfd/config.bfd
4893 rather than bfd/configure.in.
4895 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4897 * ppc-opc.c: Define POWER2 as short alias flag.
4898 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4901 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4903 * i960-dis.c (print_insn_i960): Don't read a second word for
4904 opcodes 0, 1, 2 and 3.
4906 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4908 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4910 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4912 * m68881-ext.c: Removed; no longer used.
4913 * Makefile.in: Changed accordingly.
4915 * m68k-dis.c (ext_format_68881): Don't declare.
4916 (print_insn_m68k): If an instruction uses place 'i', it uses at
4917 least four fixed bytes.
4918 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4919 extended float, convert to double using floatformat_to_double, not
4920 ieee_extended_to_double, and fetch the data before converting it.
4922 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4924 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4925 davidj@ICSI.Berkeley.EDU (David Johnson).
4927 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4929 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4930 PowerPC uses bdnz[l][a].
4932 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4934 * dis-buf.c, i386-dis.c: Include sysdep.h.
4936 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4938 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4940 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4941 by Motorola PowerPC 601 with PPC_OPCODE_601.
4942 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4943 Disassemble Motorola PowerPC 601 instructions as well as normal
4944 PowerPC instructions.
4946 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4948 * i960-dis.c (reg, mem): Just use a static array instead of
4951 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4953 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4954 condition name index if this is for a negated condition.
4956 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4957 Floating point format for 'H' operand is backwards from normal
4958 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4959 operands (fmpyadd and fmpysub), handle bizarre register
4960 translation correctly for single precision format.
4962 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4963 or 'I' operands if the next format specifier is 'M' (fcmp
4964 condition completer).
4966 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4968 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4969 single number giving a bitmask for the MB and ME fields of an M
4970 form instruction. Change NB to accept 32, and turn it into 0;
4971 also turn 0 into 32 when disassembling. Seperated SH from NB.
4972 (insert_mbe, extract_mbe): New functions.
4973 (insert_nb, extract_nb): New functions.
4974 (SC_MASK): Mask out SA and LK bits.
4975 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4976 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4977 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4978 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4979 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4980 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4981 (powerpc_macros): Define table of macro definitions.
4982 (powerpc_num_macros): Define.
4984 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4985 if PPC_OPERAND_NEXT is set.
4987 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4989 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4990 char. Retrieve contents using bfd_getl32 instead of shifting.
4992 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4994 * ppc-opc.c: New file. Opcode table for PowerPC, including
4995 opcodes for POWER (RS/6000).
4996 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4997 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4998 (CFILES): Add ppc-dis.c.
4999 (ppc-dis.o, ppc-opc.o): New targets.
5000 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
5002 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
5004 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
5005 No space before 'u', 'f', or 'N'.
5007 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
5009 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
5010 farther than we should.
5012 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
5014 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
5016 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
5018 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
5020 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
5021 needs it, to prevent reading past the end of a section.
5023 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5025 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
5026 Removed t,A case for la; always use t,A(b) case.
5028 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5030 From Ted Lemen <mellon@pepper.ncd.com>
5031 * mips-dis.c (print_insn_arg): Handle 'k'.
5032 * mips-opc.c: Make cache use k, not t.
5034 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5036 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
5037 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
5038 FLOAT_FORMAT_CODE to put out floating point register names.
5040 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5042 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
5044 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5046 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
5048 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5050 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
5051 larger than 32. Moved dsxx32 variants first for disassembler.
5053 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5055 * z8kgen.c, z8k-opc.h: Add full lda information.
5057 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
5059 * hppa-dis.c (print_insn_hppa): Do not emit a space after
5060 movb instructions. Any necessary space will be emitted by
5061 the code to handle nullification completers.
5063 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5065 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
5067 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5069 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
5070 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
5072 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5074 * mips-opc.c: Correct lwu opcode value (book had it wrong).
5076 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5078 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
5079 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
5081 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
5083 * m88k-dis.c (m88kdis): comment change. Remove space after
5085 (printop): handle new arg types DEC and XREG for m88110.
5087 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
5089 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
5090 type for absolute branch addresses. Delete special
5091 "ble" and "be" code in 'W' operand code.
5093 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5095 * mips-opc.c: Set hazard information correctly for branch
5096 likely instructions.
5098 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5100 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
5101 info->fprintf_func for printing and info->print_address_func for
5104 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5106 * mips-opc.c: Set INSN_TRAP for tXX instructions.
5108 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5110 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
5111 Corrected second case of "b" for disassembler.
5113 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5115 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
5116 to BFD swapping routines to correspond to BFD name changes.
5118 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5120 * mips-opc.c: Change div machine instruction to be z,s,t rather
5121 than s,t. Change div macro to be d,v,t rather than d,s,t.
5122 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
5123 rem and remu which generates only the corresponding div
5124 instruction. This is for compatibility with the MIPS assembler,
5125 which only generates the simple machine instruction when an
5126 explicit destination of $0 is used.
5127 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
5129 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5131 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
5132 WR_31 hazard for bal, bgezal, bltzal.
5134 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5136 * hppa-dis.c (print_insn_hppa): Use print function
5137 from within the disassemble_info, not fprintf_filtered.
5139 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5141 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
5142 Law, law@cs.utah.edu.)
5144 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5146 * mips-opc.c ("absu"): Removed.
5149 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5151 * mips-opc.c: Added r6000 and r4000 instructions and macros.
5152 Changed hazard information to distinguish between memory load
5153 delays and coprocessor load delays.
5155 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5157 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
5159 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5161 * configure.in: Don't pass cpu to config.bfd.
5163 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5165 * m88k-dis.c (m88kdis): Make class unsigned.
5167 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
5169 * alpha-dis.c (print_insn_alpha): One branch format case was
5170 missing the instruction name.
5172 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5174 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
5175 Add the arch-specific auxiliary files.
5176 (OFILES): Remove the arch-specific auxiliary files
5177 and use BFD_MACHINES instead of DIS_LIBS.
5178 * configure.in: Set BFD_MACHINES based on --with-targets option.
5180 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5182 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
5185 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5187 * sparc-opc.c: Change CONST to const to deal with gcc
5188 -Dconst=__const -traditional.
5190 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5192 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
5193 coprocessor instructions out of #if 0, and made them use new
5196 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5198 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
5200 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
5202 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
5203 instruction, for use by the disassembler.
5205 * sparc-dis.c (SEX): Add sign extension macro. Replace many
5206 hand-coded sign extensions that depended on 32-bit host ints.
5207 FIXME, we still depend on big-endian host bitfield ordering.
5208 (sparc_print_insn): Set the insn_info_valid field, and the
5209 other fields that describe the instruction being printed.
5211 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
5213 * sparc-opc.c (call): Accept all 6 addressing modes valid for
5214 `jmp' instead of just one of them.
5216 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5218 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
5219 (fput_fp_reg_r): Renamed from fput_reg_r.
5220 (fput_fp_reg): New function.
5221 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5223 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5225 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5227 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5229 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5231 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5232 don't output a space.
5234 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5236 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
5238 * mips-opc.c: New file, containing opcode table from
5239 ../include/opcode/mips.h.
5240 * Makefile.in: Add it.
5242 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5244 * m88k-dis.c: New file, moved in from gdb and changed to use the
5245 new dis-asm.h disassembler interface.
5246 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5247 (m88k-dis.o): New target.
5249 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5251 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5252 argument string const char * to correspond to opcode/mips.h.
5254 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5256 * mips-dis.c: Updated to account for name changes in new version
5258 * Makefile.in: Added header file dependencies.
5260 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5262 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5264 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5266 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5267 extend, rather than shifts.
5269 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5271 * Makefile.in: Undo 15 June change.
5273 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5275 * m68k-dis.c (print_insn_arg): Change return value to byte count
5277 * m68k-dis.c: Re-write to detect invalid operands before
5278 printing anything, so we can handle this the same way we
5279 handle invalid opcodes.
5281 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5283 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5285 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5287 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5290 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5292 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5294 * configure.in: Do make sysdep.h link.
5295 * Makefile.in: Search ../include. Don't search ../bfd.
5297 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5299 Changes from Jeff Law, law@cs.utah.edu:
5300 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5301 Do not print a space before the completers specified by
5304 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5306 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5307 defined, since gdb has been fixed.
5309 Changes from Jeff Law, law@cs.utah.edu:
5310 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5311 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5312 be a *disassemble_info, not a *FILE.
5313 * hppa-dis.c: Support 'd', '!', and 'a'.
5314 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5315 * hppa-dis.c: Delete cases which are no longer needed.
5317 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5319 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5321 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5323 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5326 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5328 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5329 * configure.in: No longer need to configure to get sysdep.h.
5331 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5333 * Patches from Jeffrey Law <law@cs.utah.edu>.
5334 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5335 templates for 1.1 FP computational instructions.
5337 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5339 * h8500-dis.c (print_insn_h8500): Address argument is type
5341 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5344 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5345 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5347 * sparc-dis.c (compare_opcodes): Move static declaration to
5350 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5352 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5353 instruction, remove unimp hack from 'l' argument.
5355 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5357 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5360 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5362 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5363 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5366 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5368 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5369 arrays of string pointers to 2-d arrays of chars, to save
5372 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5374 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5375 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5377 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5379 * hppa-dis.c: New file from Utah, adapted to new disassembler
5381 * Makefile.in: Include it.
5383 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5385 * sh-dis.c, sh-opc.h: New files.
5387 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5389 * alpha-dis.c, alpha-opc.h: New files.
5391 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5393 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5396 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5398 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5400 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5402 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5405 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5407 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5408 and double percent signs a few places.
5410 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5412 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5413 Use info->print_address_func not print_address.
5415 * dis-buf.c (generic_print_address): New function.
5417 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5419 * Makefile.in: Add sparc-dis.c.
5420 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5422 Add `add' instruction to the set that get checked
5423 for a preceding `sethi' in order to print an absolute address.
5424 * (print_insn): Disassembly prefers real instructions.
5425 (is_delayed_branch): Speed up.
5426 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5427 Still missing some float ops, and needs testing.
5428 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5429 F_ALIAS. Use printf, not fprintf, when not passing a file
5431 (compare_opcodes): Check that identical instructions have
5432 identical opcodes, complain otherwise.
5435 * Include reg_names.
5437 Use dis-asm.h/read_memory_func interface.
5439 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5441 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5442 deliberately return non-zero to setjmp from longjmp. Otherwise
5443 this code fails to compile.
5445 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5447 * m68k-dis.c: Fix prototype for fetch_arg().
5449 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5451 * dis-buf.c: New file, for new read_memory_func interface.
5452 Makefile.in (OFILES): Include it.
5453 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5454 Use new read_memory_func interface.
5456 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5458 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5459 * h8500-opc.h: Fix couple of opcodes.
5461 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5463 * Makefile.in: add dvi & installcheck targets
5465 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5467 * Makefile.in: Update for h8500-dis.c.
5469 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5471 * h8500-dis.c, h8500-opc.h: New files
5473 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5475 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5476 ../include/dis-asm.h.
5477 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5478 and ../gdb/m68k-pinsn.c).
5479 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5480 and ../gdb/i386-pinsn.c).
5481 * m68881-ext.c: New file. Moved definition of
5482 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5483 * Makefile.in: Adjust for new files.
5484 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5485 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5486 can be dis-assembled.
5488 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5490 * mips-dis.c (print_insn_arg): Now returns void.
5492 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5494 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5495 files that use the macros.
5497 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5499 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5500 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5501 (CFILES): Added mips-dis.c.
5503 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5505 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5506 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5508 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5510 * Makefile.in: Improve *clean rules.
5511 * configure.in: Allow a default host.
5513 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5515 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5516 files include other sysdep files
5518 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5520 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5522 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5524 * configure.in: For host support, use ../bfd/configure.host
5525 so it stays in sync with the ../bfd/hosts database.
5527 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5529 * configure.in: use cpu-vendor-os triple instead of nested cases
5531 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5533 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5534 *always* the wrong one.
5536 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5538 * z8kgen.c: added copyright info
5540 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5542 * z8k-dis.c (unparse_instr): prettier tabs
5543 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5545 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5547 * configure.in: Add ncr* configuration.
5548 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5549 picayune ANSI compilers happy.
5551 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5553 * configure.in (i386): Make i386 and i486 synonymous for now.
5554 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5556 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5558 * Makefile.in (install): Fix typo.
5560 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5562 * Makefile.in (make): Remove obsolete crud.
5563 (sparc-opc.o): Avoid Sun Make VPATH bug.
5565 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5567 * Makefile.in: since there are no SUBDIRS, remove rule and
5568 references of subdir_do.
5570 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5572 * Makefile.in (install): Get the library name right here too.
5573 Don't install bfd.h, since it's unrelated to this library. No
5574 subdirs to recurse into, either.
5575 (CFILES): The source file has a .c suffix, not .o.
5577 * sparc-opc.c: New file, moved from BFD.
5578 * Makefile.in (OFILES): Build it.
5580 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5582 * z8k-dis.c: fixed forward refferences of some declarations.
5584 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5586 * Makefile.in: get the name of the library right
5588 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5590 * z8k-dis.c: knows how to disassemble z8k stuff
5591 * z8k-opc.h: new file full of z8000 opcodes
5595 version-control: never