opcodes/ChangeLog

   1 2009-11-13  H.J. Lu  <hongjiu.lu@intel.com>
   2
   3         * i386-dis.c (ckprefix): Updated to return 0 if number of
   4         prefixes > 14 and record the last position for each prefix.
   5         (lock_prefix): Removed.
   6         (data_prefix): Likewise.
   7         (addr_prefix): Likewise.
   8         (repz_prefix): Likewise.
   9         (repnz_prefix): Likewise.
  10         (last_lock_prefix): New.
  11         (last_repz_prefix): Likewise.
  12         (last_repnz_prefix): Likewise.
  13         (last_data_prefix): Likewise.
  14         (last_addr_prefix): Likewise.
  15         (last_rex_prefix): Likewise.
  16         (last_seg_prefix): Likewise.
  17         (MAX_CODE_LENGTH): Likewise.
  18         (ADDR16_PREFIX): Likewise.
  19         (ADDR32_PREFIX): Likewise.
  20         (DATA16_PREFIX): Likewise.
  21         (DATA32_PREFIX): Likewise.
  22         (REP_PREFIX): Likewise.
  23         (seg_prefix): Likewise.
  24         (all_prefixes): Change size to MAX_CODE_LENGTH - 1.
  25         (prefix_name): Handle ADDR16_PREFIX, ADDR32_PREFIX,
  26         DATA16_PREFIX, DATA32_PREFIX and REP_PREFIX.
  27         (get_valid_dis386): Updated.
  28         (OP_C): Likewise.
  29         (OP_Monitor): Likewise.
  30         (REP_Fixup): Likewise.
  31         (print_insn): Display all prefixes.
  32         (putop): Set PREFIX_DATA on used_prefixes only if it is used.
  33         (intel_operand_size): Likewise.
  34         (OP_E_register): Likewise.
  35         (OP_G): Likewise.
  36         (OP_REG): Likewise.
  37         (OP_IMREG): Likewise.
  38         (OP_I): Likewise.
  39         (OP_I64): Likewise.
  40         (OP_sI): Likewise.
  41         (CRC32_Fixup): Likewise.
  42         (MOVBE_Fixup): Likewise.
  43         (OP_E_memory): Set REFIX_DATA on used_prefixes when it is used
  44         in 16bit mode.
  45         (OP_J): Set REX_W used if it is used. Set PREFIX_DATA on
  46         used_prefixes only if it is used.
  47
  48 2009-11-12  H.J. Lu  <hongjiu.lu@intel.com>
  49
  50         * i386-opc.tbl: Remove IsLockable from add, adc, and, dec, inc,
  51         or, sbb, sub, xor and xchg with register only operands.
  52         * i386-tbl.h: Regenerated.
  53
  54 2009-11-12  H.J. Lu  <hongjiu.lu@intel.com>
  55
  56         * i386-gen.c (opcode_modifiers): Add IsLockable.
  57
  58         * i386-opc.h (IsLockable): New.
  59         (i386_opcode_modifier): Add islockable.
  60
  61         * i386-opc.tbl: Add IsLockable to add, adc, and, btc, btr,
  62         bts, cmpxchg, cmpxch8b, dec, inc, neg, not, or, sbb, sub,
  63         xor, xadd and xchg.
  64         * i386-tbl.h: Regenerated.
  65
  66 2009-11-12  Daniel Jacobowitz  <dan@codesourcery.com>
  67
  68         * arm-dis.c (coprocessor_opcodes): Use %A instead of %C.  Remove
  69         generic coprocessor instructions for FPA loads and stores.
  70         (print_insn_coprocessor): Remove %C support.  Display address for
  71         PC-relative offsets in %A.
  72
  73 2009-11-11  H.J. Lu  <hongjiu.lu@intel.com>
  74
  75         * i386-dis.c (all_prefixes): New.
  76         (ckprefix): Set all_prefixes.
  77         (print_insn): Print all_prefixes instead of lock_prefix,
  78         repz_prefix, repnz_prefix, addr_prefix and data_prefix.
  79
  80 2009-11-11  Nick Clifton  <nickc@redhat.com>
  81
  82         PR binutils/10924
  83         * arm-dis.c (UNPREDICTABLE_INSTRUCTION): New macro.
  84         (print_insn_arm): Extend %s format control code to check for
  85         unpredictable addressing modes.  Add support for %S format control
  86         code which suppresses this check.
  87         (W_BIT, I_BIT, U_BIT, P_BIT): New macros.
  88         (WRITEBACK_BIT_SET, IMMEDIATE_BIT_SET, NEGATIVE_BIT_SET,
  89         PRE_BIT_SET): New macros.
  90         (print_insn_coprocessor): Use the new macros instead of magic
  91         constants.
  92         (print_arm_address): Likewise.
  93         (pirnt_insn_arm): Likewise.
  94         (print_insn_thumb32): Likewise.
  95
  96 2009-11-11  Nick Clifton  <nickc@redhat.com>
  97
  98         * po/id.po: Updated Indonesian translation.
  99
 100 2009-11-10  Maxim Kuvyrkov  <maxim@codesourcery.com>
 101
 102         * m68k-dis.c (print_insn_arg): Handle RGPIOBAR, ACR[4-7] and MBAR[01].
 103
 104 2009-11-06  Sebastian Pop  <sebastian.pop@amd.com>
 105
 106         * i386-dis.c (reg_table): Add XOP_8F_TABLE (XOP_09) to
 107         reg_table[REG_8F][1]: for XOP instructions, ModRM.reg first points to
 108         B.mm in the RXB.mmmmm byte, and so when B is set, we still should use
 109         the xop_table.
 110         (get_valid_dis386): Removed unused condition (from cut/n/paste) for
 111         XOP instructions.
 112
 113 2009-11-05  Sebastian Pop  <sebastian.pop@amd.com>
 114             Quentin Neill  <quentin.neill@amd.com>
 115
 116         * opcodes/i386-dis.c (OP_LWPCB_E): New.
 117         (OP_LWP_E): New.
 118         (OP_LWP_I): New.
 119         (USE_XOP_8F_TABLE): New.
 120         (XOP_8F_TABLE): New.
 121         (REG_XOP_LWPCB): New.
 122         (REG_XOP_LWP): New.
 123         (XOP_09): New.
 124         (XOP_0A): New.
 125         (reg_table): Redirect REG_8F to XOP_8F_TABLE.
 126         Add entries for REG_XOP_LWPCB and REG_XOP_LWP.
 127         (xop_table): New.
 128         (get_valid_dis386): Handle USE_XOP_8F_TABLE.
 129         Use the offsets VEX_0F, VEX_0F38, and VEX_0F3A instead of their values
 130         to access to the vex_table.
 131         (OP_LWPCB_E): New.
 132         (OP_LWP_E): New.
 133         (OP_LWP_I): New.
 134         * opcodes/i386-gen.c (cpu_flag_init): Add CPU_LWP_FLAGS, CpuLWP.
 135         (cpu_flags): Add CpuLWP.
 136         (opcode_modifiers): Add VexLWP, XOP09, and XOP0A.
 137         * opcodes/i386-opc.h (CpuLWP): New.
 138         (i386_cpu_flags): Add bit cpulwp.
 139         (VexLWP): New.
 140         (XOP09): New.
 141         (XOP0A): New.
 142         (i386_opcode_modifier): Add vexlwp, xop09, and xop0a.
 143         * opcodes/i386-opc.tbl (llwpcb): Added.
 144         (lwpval): Added.
 145         (lwpins): Added.
 146
 147 2009-11-04  DJ Delorie  <dj@redhat.com>
 148
 149         * rx-decode.opc (rx_decode_opcode) (mvtipl): Add.
 150         (mvtcp, mvfcp, opecp): Remove.
 151         * rx-decode.c: Regenerate.
 152         * rx-dis.c (cpen): Remove.
 153
 154 2009-11-03  Doug Evans  <dje@sebabeach.org>
 155
 156         * m32c-desc.c: Regenerate.
 157         * mep-desc.c: Regenerate.
 158
 159 2009-11-02  Paul Brook  <paul@codesourcery.com>
 160
 161         * arm-dis.c (coprocessor_opcodes): Update to use new feature flags.
 162         Add VFPv4 instructions.
 163
 164 2009-10-29  Sebastian Pop  <sebastian.pop@amd.com>
 165
 166         * i386-dis.c (OP_VEX_FMA): Removed.
 167         (VexFMA): Removed.
 168         (Vex128FMA): Removed.
 169         (prefix_table): First source operand of FMA4 insns is decoded
 170         with Vex not with VexFMA.
 171         (OP_EX_VexW): Second source operand is decoded with get_vex_imm8
 172         when vex.w is set.  Third source operand is decoded with
 173
 174 2009-10-27  Alan Modra  <amodra@bigpond.net.au>
 175
 176         * Makefile.am (HFILES): Remove cgen-ops.h and cgen-types.h.
 177         * Makefile.in: Regenerate.
 178         * po/POTFILES.in: Regenerate.
 179
 180 2009-10-23  Doug Evans  <dje@sebabeach.org>
 181
 182         * cgen-ops.h: Delete, moved to ../include/cgen/basic-ops.h.
 183         * cgen-types.h: Delete, moved to ../include/cgen/basic-modes.h.
 184         * cgen-bitset.c: Update.
 185         * fr30-desc.h: Regenerate.
 186         * frv-desc.h: Regenerate.
 187         * ip2k-desc.h: Regenerate.
 188         * iq2000-desc.h: Regenerate.
 189         * lm32-desc.h: Regenerate.
 190         * m32c-desc.h: Regenerate.
 191         * m32c-opc.h: Regenerate.
 192         * m32r-desc.h: Regenerate.
 193         * mep-desc.h: Regenerate.
 194         * mt-desc.h: Regenerate.
 195         * openrisc-desc.h: Regenerate.
 196         * xc16x-desc.h: Regenerate.
 197         * xstormy16-desc.h: Regenerate.
 198
 199 2009-10-22  DJ Delorie  <dj@redhat.com>
 200
 201         * rx-decode.opc (decode_opcode): Fix flags for MUL, SUNTIL, and SWHILE.
 202         * rx-decode.c: Regenerated.
 203
 204 2009-10-20  H.J. Lu  <hongjiu.lu@intel.com>
 205
 206         PR gas/10775
 207         * i386-dis.c: Document LB, LS and LV macros.
 208         (dis386): Use mov%LB, mov%LS and mov%LV on mov instruction
 209         with the 64-bit displacement or immediate operand.
 210         (putop): Handle LB, LS and LV macros.
 211
 212 2009-10-18  Doug Evans  <dje@sebabeach.org>
 213
 214         * lm32-opinst.c: Regenerate.
 215         * m32c-desc.c: Regenerate.
 216         * m32r-opinst.c: Regenerate.
 217         * openrisc-ibld.c: Regenerate.
 218         * xc16x-desc.c: Regenerate.
 219         * xc16x-desc.h: Regenerate.
 220
 221 2009-10-17  Doug Evans  <dje@sebabeach.org>
 222
 223         * Makefile.am (CGEN_CPUS): Add iq2000, lm32.
 224         (FR30_DEPS, FRV_DEPS, IQ2000_DEPS): Move so all cgen *_DEPS are
 225         sorted alphabetically.
 226         (stamp-fr30, stamp-frv, stamp-iq2000, stamp-xc16x): Move so all cgen
 227         stamp-* rules are sorted alphabetically.
 228         * Makefile.in: Regenerate.
 229
 230 2009-10-16  H.J. Lu  <hongjiu.lu@intel.com>
 231
 232         * i386-opc.h: Use enum instead of nested macros.
 233
 234 2009-10-16  H.J. Lu  <hongjiu.lu@intel.com>
 235
 236         * i386-dis.c: Simplify enums.
 237
 238 2009-10-15  H.J. Lu  <hongjiu.lu@intel.com>
 239             Ineiev <ineiev@gmail.com>
 240
 241         PR binutils/10767
 242         * i386-dis.c: Use enum instead of nested macros.
 243
 244 2009-10-15  H.J. Lu  <hongjiu.lu@intel.com>
 245
 246         * i386-dis.c (MAX_BYTEMODE): Removed.
 247
 248 2009-10-14  Tomas Hurka  <tom@hukatronic.cz>
 249
 250         PR 969
 251         * m68k-opc.c (m68k_opcodes): Correct mask for macl and msacl.
 252
 253 2009-10-13  H.J. Lu  <hongjiu.lu@intel.com>
 254
 255         * i386-dis.c (print_insn): Always clear need_vex, need_vex_reg
 256         and vex_w_done.
 257
 258 2009-10-07  Michael Eager  <eager@eagercon.com>
 259
 260         * microblaze-dis.c: Add include for microblaze-dis.h,
 261         eliminate local extern decls.
 262         * microblaze-dis.h: New.
 263
 264 2009-10-06  Nick Clifton  <nickc@redhat.com>
 265
 266         * po/fi.po: Updated Finnish translation.
 267
 268 2009-10-03  Andreas Schwab  <schwab@linux-m68k.org>
 269
 270         * opc2c.c: Include "libiberty.h" and <errno.h>.
 271         (orig_filename): Constify.
 272         (dump_lines): Fix line number directive.
 273         (main): Set orig_filename to basename of input file.  Use
 274         xstrerror.
 275
 276         * Makefile.am (rx-dis.lo): Remove explicit dependencies.
 277         ($(srcdir)/rx-decode.c): Use @MAINT@.  Use $(EXEEXT_FOR_BUILD)
 278         instead of $(EXEEXT).
 279         (opc2c$(EXEEXT_FOR_BUILD)): Renamed from opc2c$(EXEEXT) and use
 280         $(LINK_FOR_BUILD).  Link with libiberty.
 281         (MOSTLYCLEANFILES): Add opc2c$(EXEEXT_FOR_BUILD).
 282         (MAINTAINERCLEANFILES): Add $(srcdir)/rx-decode.c.
 283         * Makefile.in: Regenerated.
 284         * rx-decode.c: Regenerated.
 285
 286 2009-10-03  Paul Reed  <paulreed@paddedcell.com>
 287
 288         * arm-dis.c (print_insn): Check symtab_size not *symtab.
 289
 290 2009-10-02  H.J. Lu  <hongjiu.lu@intel.com>
 291
 292         * i386-opc.tbl: Drop Disp64 on jump and loop instructions.
 293         * i386-tbl.h: Regenerated.
 294
 295 2009-10-02  Peter Bergner  <bergner@vnet.ibm.com>
 296
 297         * ppc-dis.c (ppc_opts): Add "476" entry.
 298         * ppc-opc.c (PPC476): Define.
 299         (powerpc_opcodes): Update mnemonics where required for 476.
 300
 301 2009-10-01  Peter Bergner  <bergner@vnet.ibm.com>
 302
 303         * ppc-opc.c (PPCA2): Use renamed mask PPC_OPCODE_A2.
 304         * ppc-dis.c (ppc_opts): Likewise.
 305         Rename "ppca2" to "a2".
 306
 307 2009-10-01  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 308
 309         * crx-dis.c (match_opcode): Truncate mcode to 32-bit.
 310
 311 2009-09-29  DJ Delorie  <dj@redhat.com>
 312
 313         * Makefile.am: Add RX files.
 314         * configure.in: Add support for RX target.
 315         * disassemble.c: Likewise.
 316         * Makefile.in: Regenerate.
 317         * configure: Regenerate.
 318         * opc2c.c: New file.
 319         * rx-decode.c: New file.
 320         * rx-decode.opc: New file.
 321         * rx-dis.c: New file.
 322
 323 2009-09-29  Peter Bergner  <bergner@vnet.ibm.com>
 324
 325         * ppc-opc.c (powerpc_opcodes): Remove support for the the "lxsdux",
 326         "lxvd2ux", "lxvw4ux", "stxsdux", "stxvd2ux" and "stxvw4ux" opcodes.
 327
 328 2009-09-25  Michael Eager  <eager@eagercon.com>
 329
 330         * microblaze-dis.c (get_insn_microblaze, microblaze_get_target_address,
 331         microblaze_decode_insn): Add declarations.
 332         (get_delay_slots_microblaze): Remove.
 333
 334 2009-09-25  Martin Thuresson  <martint@google.com>
 335
 336         Update sources to make arc and arm targets compile cleanly with
 337         -Wc++-compat:
 338         * arc-dis.c Fix casts.
 339         * arc-ext.c: Add casts.
 340         * arm-dis.c (enum opcode_sentinel_enum): Gave name to anonymous
 341         enum.
 342
 343 2009-09-24  H.J. Lu  <hongjiu.lu@intel.com>
 344
 345         * i386-gen.c (opcode_modifiers): Remove Vex256.
 346         (set_bitfield): Handle XXX=V.
 347
 348         * i386-opc.h (Vex): Update comments.
 349         (Vex256): Removed.
 350         (VexNDS): Updated.
 351         (i386_opcode_modifier): Change vex to 2 bits.  Remove vex256.
 352
 353         * i386-opc.tbl: Replace "Vex|Vex256" with Vex=2.
 354         * i386-tbl.h: Regenerated.
 355
 356 2009-09-23  Nick Clifton  <nickc@redhat.com>
 357
 358         * po/fr.po: Updated French translation.
 359
 360 2009-09-21  Ben Elliston  <bje@au.ibm.com>
 361             Peter Bergner  <bergner@vnet.ibm.com>
 362
 363         * ppc-dis.c (ppc_opts): Add "ppca2" entry.
 364         * ppc-opc.c (powerpc_opcodes): Add eratilx, eratsx, eratsx.,
 365         eratre, wchkall, eratwe, ldawx., mdfcrx., mfdcr. mtdcrx., icswx,
 366         icswx., mtdcr., dci, wclrone, wclrall, wclr, erativax, tlbsrx.,
 367         ici mnemonics.
 368         (ERAT_T): New operand.
 369         (XWC_MASK): New mask.
 370         (XOPL2): New macro.
 371         (PPCA2): Define.
 372
 373 2009-09-18  Nick Clifton  <nickc@redhat.com>
 374
 375         * po/es.po: Updated Spanish translation.
 376         * po/vi.po: Updated Vietnamese translation.
 377
 378 2009-09-15  H.J. Lu  <hongjiu.lu@intel.com>
 379
 380         * i386-dis.c (OP_E_memory): Don't print '-' in Intel mode if
 381         disp == -disp.
 382
 383 2009-09-14  Nick Clifton  <nickc@redhat.com>
 384
 385         * po/nl.po: Updated Dutch translation.
 386
 387 2009-09-11  Nick Clifton  <nickc@redhat.com>
 388
 389         * po/opcodes.pot: Updated by the Translation project.
 390
 391 2009-09-11  Martin Thuresson  <martint@google.com>
 392
 393         Updated sources to compile cleanly with -Wc++-compat:
 394         * ld.h (enum endian_enum,enum symbolic_enum,enum dynamic_list_enum): Move to top level.
 395         * ldcref.c: Add casts.
 396         * ldctor.c: Add casts.
 397         * ldexp.c
 398         * ldexp.h (enum node_tree_enum,enum phase_enum): Move to top level.
 399         * ldlang.c: Add casts. (lang_insert_orphan): Use enum name instead of integer.
 400         * ldlang.h (enum statement_enum): Move to top level.
 401         * ldmain.c: Add casts.
 402         * ldwrite.c: Add casts.
 403         * lexsup.c: Add casts. (enum control_enum): Move to top level.
 404         * mri.c: Add casts. (mri_draw_tree): Use enum name instead of integer.
 405
 406 2009-09-10  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
 407
 408         * s390-dis.c (print_insn_s390): Avoid 'long long'.
 409
 410 2009-09-10  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
 411
 412         * s390-dis.c (s390_extract_operand): Remove the shift for pcrel operands.
 413         (print_insn_s390): Signextend and shift pcrel operands before printing.
 414
 415 2009-09-09  H.J. Lu  <hongjiu.lu@intel.com>
 416
 417         * i386-dis.c (vex_len_table): Change VEX_LEN_AE_R_X_M0 to
 418         VEX_LEN_AE_R_X_M_0 in comments.
 419
 420 2009-09-08  DJ Delorie  <dj@redhat.com>
 421
 422         * mep-opc.c: Regenerate.
 423
 424 2009-09-08  Andreas Schwab  <schwab@linux-m68k.org>
 425
 426         * z8kgen.c (struct op): Replace unused flavor with id.
 427         (opt): Remove extra xorb entry.
 428         (func): Use id field as fallback.
 429         (sub): Return new string, caller changed.
 430         (internal): Allocate end marker.  Assign unique id before sorting.
 431         (gas): Likewise.  Fix loop end condition.
 432         * z8k-opc.h: Regenerate.
 433
 434 2009-09-08  Alan Modra  <amodra@bigpond.net.au>
 435
 436         * ppc-opc.c (powerpc_macros <extrdi>): Allow n+b of 64.
 437
 438 2009-09-07  Alan Modra  <amodra@bigpond.net.au>
 439
 440         * z8kgen.c (func): Fix thinko last patch.
 441
 442 2009-09-07  Alan Modra  <amodra@bigpond.net.au>
 443
 444         * z8kgen.c (func): Stabilize qsort of identically named entries.
 445         * z8k-opc.h: Regenerate.
 446
 447 2009-09-07  Tristan Gingold  <gingold@adacore.com>
 448
 449         * po/opcodes.pot: Regenerate.
 450
 451 2009-09-07  Alan Modra  <amodra@bigpond.net.au>
 452
 453         * configure.in (BUILD_LIBS, BUILD_LIB_DEPS): Define and subst.
 454         * configure: Regenerate.
 455         * Makefile.am (LIBIBERTY, BUILD_LIBIBERTY, BUILD_LIBINTL): Delete.
 456         (BUILD_LIBS, BUILD_LIB_DEPS): Define.  Use..
 457         (i386-gen, ia64-gen, z8kgen): ..here.
 458         * Makefile.in: Regenerate.
 459
 460 2009-09-07  Tristan Gingold  <gingold@adacore.com>
 461
 462         * z8k-opc.h: Regenerate.
 463
 464 2009-09-05  Martin Thuresson  <martin@mtme.org>
 465
 466         * ia64-dis.c (print_insn_ia64): Update code to use renamed member.
 467         * m88k-dis.c (m88kdis): Rename variable class to in_class.
 468         * tic80-opc.c (tic80_symbol_to_value, tic80_value_to_symbol):
 469         Rename argument class to symbol_class.
 470
 471 2009-09-04  Jie Zhang  <jie.zhang@analog.com>
 472
 473         * bfin-dis.c (decode_pseudodbg_assert_0): Change according
 474         to the new encoding of DBGA, DBGAH, and DBGAL.
 475         (_print_insn_bfin): Likewise.
 476
 477 2009-09-03  Jie Zhang  <jie.zhang@analog.com>
 478
 479         * bfin-dis.c (_print_insn_bfin): Don't declare.
 480         (print_insn_bfin): Don't declare.
 481         (dregs_pair): Remove.
 482         (ignore_bits): Remove.
 483         (ccstat): Remove.
 484
 485 2009-09-03  Jie Zhang  <jie.zhang@analog.com>
 486
 487         * bfin-dis.c (IS_DREG): Define.
 488         (IS_PREG): Define.
 489         (IS_AREG): Define.
 490         (IS_GENREG): Define.
 491         (IS_DAGREG): Define.
 492         (IS_SYSREG): Define.
 493         (decode_REGMV_0): Check illegal register move instructions.
 494
 495 2009-09-03  Dave Korn  <dave.korn.cygwin@gmail.com>
 496
 497         * Makefile.am (BUILD_LIBINTL): New variable.
 498         (i386-gen$(EXEEXT_FOR_BUILD)): Use it.
 499         (ia64-gen$(EXEEXT_FOR_BUILD)): And here.
 500         (z8kgen$(EXEEXT_FOR_BUILD)): And here.
 501         * Makefile.in: Regenerate.
 502
 503 2009-09-01  DJ Delorie  <dj@redhat.com>
 504
 505         * mep-asm.c: Regenerate.
 506         * mep-desc.c: Regenerate.
 507         * mep-opc.c: Regenerate.
 508
 509 2009-09-01  Tristan Gingold  <gingold@adacore.com>
 510
 511         * makefile.vms: Ported to Itanium VMS.  Remove useless targets and
 512         dependencies.  Remove unused FORMAT variable.
 513         * configure.com: New file to create build.com DCL script for
 514         Itanium VMS or Alpha VMS.
 515
 516 2009-08-29  Martin Thuresson  <martin@mtme.org>
 517
 518         * cris-dis.c (bytes_to_skip): Update code to use new name.
 519         * i386-dis.c (putop): Update code to use new name.
 520         * i386-gen.c (process_i386_opcodes): Update code to use
 521         new name.
 522         * i386-opc.h (struct template): Rename struct template to
 523         insn_template. Update code accordingly.
 524         * i386-tbl.h (i386_optab): Update type to use new name.
 525         * ia64-dis.c (print_insn_ia64): Rename variable template
 526         to template_val.
 527         * tic30-dis.c (struct instruction, get_tic30_instruction):
 528         Update code to use new name.
 529         * tic54x-dis.c (has_lkaddr, get_insn_size)
 530         (print_parallel_instruction, print_insn_tic54x, tic54x_get_insn):
 531         Update code to use new name.
 532         * tic54x-opc.c (tic54x_unknown_opcode, tic54x_optab):
 533         Update type to new name.
 534         * z8kgen.c (internal, gas): Rename variable new to new_op.
 535
 536 2009-08-28  H.J. Lu  <hongjiu.lu@intel.com>
 537
 538         * Makefile.am (COMPILE_FOR_BUILD): Remove BUILD_CPPFLAGS.
 539         Replace BUILD_CFLAGS with CFLAGS_FOR_BUILD.
 540         (LINK_FOR_BUILD): Replace BUILD_CFLAGS/BUILD_LDFLAGS with
 541         CFLAGS_FOR_BUILD/LDFLAGS_FOR_BUILD.
 542         * Makefile.in: Regenerated.
 543
 544 2009-08-27  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 545
 546         * Makefile.am (bfdlibdir, bfdincludedir): Move definition ...
 547         [INSTALL_LIBBFD]: ... here, ...
 548         [INSTALL_LIBBFD]: ... and empty overrides here.
 549         [!INSTALL_LIBBFD]: (rpath_bfdlibdir): New variable.
 550         [!INSTALL_LIBBFD] (libbfd_la_LDFLAGS): Use it.
 551         * Makefile.in: Regenerate.
 552         * configure: Regenerate.
 553
 554 2009-08-26  Philippe De Muyter  <phdm@macqel.be>
 555
 556         * m68k-dis.c (print_insn_arg): Add movecr register names for
 557         coldfire v4e families.
 558
 559 2009-08-25  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 560
 561         * Makefile.am (SUBDIRS): Build '.' before 'po'.
 562         (COMPILE_FOR_BUILD, LINK_FOR_BUILD, BUILD_LIBIBERTY)
 563         (MOSTLYCLEANFILES, MAINTAINERCLEANFILES): New variables.
 564         (i386-gen$(EXEEXT_FOR_BUILD)): Renamed from i386-gen, rewrite
 565         using *BUILD variables, depend upon $(BUILD_LIBIBERTY).
 566         (i386-gen.o): New rule.
 567         ($(srcdir)/i386-init.h): Adjust.
 568         (i386-opc.lo): Depend on $(srcdir)/i386-tbl.h.
 569         (ia64-gen$(EXEEXT_FOR_BUILD)): Rename from ia64-gen, adjust likewise.
 570         (ia64-gen.o): New rule.
 571         (ia64_asmtab_deps): New variable.
 572         ($(srcdir)/ia64-asmtab.c): Use it; adjust likewise.
 573         (ia64-opc.lo): Depend on $(srcdir)/ia64-asmtab.c.
 574         (s390-mkopc$(EXEEXT_FOR_BUILD)): Rename from s390-mkopc, adjust
 575         likewise.
 576         (s390-opc.tab): Adjust.
 577         (z8kgen$(EXEEXT_FOR_BUILD), z8kgen.o, $(srcdir)/z8k-opc.h): New
 578         rules.
 579         (z8k-dis.lo): Depend on $(srcdir)/z8k-opc.h.
 580         * Makefile.in: Regenerate.
 581         * z8kgen.c (gas): Avoid '/*' in comment.
 582         * z8k-opc.h (func): Regenerate.
 583
 584 2009-08-24  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 585
 586         * Makefile.am (TARGET_LIBOPCODES_CFILES): New variable, taken
 587         from $(CFILES), sorted, with dis-buf.c, dis-init.c, disassemble.c,
 588         i386-gen.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c, ia64-opc-i.c,
 589         ia64-opc-m.c, ia64-opc-d.c, ia64-gen.c, ia64-asmtab.c removed, and
 590         msp430-dis.c added.
 591         (LIBOPCODES_CFILES): New variable, adding to
 592         TARGET_LIBOPCODES_CFILES also non-target library sources.
 593         (CFILES): Factorize based on $(LIBOPCODES_CFILES), adding generator
 594         files.
 595         (ALL_MACHINES): Factorize based on $(TARGET_LIBOPCODES_CFILES).
 596         (EXTRA_libopcodes_la_SOURCES): Use $(LIBOPCODES_CFILES).
 597         * Makefile.in: Regenerate.
 598         * po/POTFILES.in: Regenerate.
 599
 600 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 601
 602         * Makefile.am (libopcodes_la_LDFLAGS): Initialize early.
 603         [INSTALL_LIBBFD] (bfdlib_LTLIBRARIES): Set only in this condition.
 604         [INSTALL_LIBBFD] (bfdinclude_DATA): New.
 605         [!INSTALL_LIBBFD] (noinst_LTLIBRARIES): New.
 606         [!INSTALL_LIBBFD] (libopcodes_la_LDFLAGS): Ensure libopcodes.la
 607         is built shared even if it is not to be installed.
 608         (install-bfdlibLTLIBRARIES,uninstall-bfdlibLTLIBRARIES)
 609         (install_libopcodes, uninstall_libopcodes): Remove.
 610         (AM_CPPFLAGS): Renamed from ...
 611         (INCLUDES): ... this.
 612         * Makefile.in: Regenerate.
 613
 614         * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9 and cygnus, add
 615         1.11, foreign, no-dist.
 616         (MKDEP, m32c_opc_h): Remove variables.
 617         (disassemble.lo): Rewrite using automake-style dependency
 618         tracking rules; only list the dependency upon the primary source
 619         file, but no included headers.
 620         (m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo, m32c-opc.lo)
 621         (i386-gen.o, ia64-gen.o): Remove dependency statements.
 622         (EXTRA_libopcodes_la_SOURCES): New variable, list $(CFILES) to
 623         ensure all dependency fragments are included in the Makefile.
 624         (s390-opc.lo): Depend on s390-opc.tab.
 625         (DEP, DEP1, dep.sed, dep, dep-in, dep-am): Remove rules.
 626         (mkdep section): Remove.
 627         * Makefile.in: Regenerate.
 628         * po/POTFILES.in: Regenerate.
 629
 630         * Makefile.am (install-pdf, install-html): Remove.
 631         * Makefile.in: Regenerate.
 632
 633         * Makefile.in: Regenerate.
 634         * aclocal.m4: Likewise.
 635         * config.in: Likewise.
 636         * configure: Likewise.
 637
 638 2009-08-06  Michael Eager <eager@eagercon.com>
 639
 640         * Makefile.am: Add microblaze-opc.h to HFILES, microblaze-dis.c to
 641         CFILES, microblaze-dis.lo to ALL_MACHINES, targets.
 642         * Makefile.in: Regenerate.
 643         * configure.in: Add bfd_microblaze_arch target.
 644         * configure: Regenerate.
 645         * disassemble.c: Define ARCH_microblaze, return
 646         print_insn_microblaze().
 647         * microblaze-dis.c: New MicroBlaze disassembler.
 648         * microblaze-opc.h: New MicroBlaze opcode definitions.
 649         * microblaze-opcm.h: New MicroBlaze opcode types.
 650
 651 2009-07-25  H.J. Lu  <hongjiu.lu@intel.com>
 652
 653         * configure.in: Handle bfd_l1om_arch.
 654         * disassemble.c (disassembler): Likewise.
 655
 656         * configure: Regenerated.
 657
 658         * i386-dis.c (print_insn): Handle bfd_mach_l1om and
 659         bfd_mach_l1om_intel_syntax.  Use 8 bytes per line for Intel L1OM.
 660
 661         * i386-gen.c (cpu_flag_init): Set CPU_UNKNOWN_FLAGS to ~CpuL1OM.
 662         Add CPU_L1OM_FLAGS.
 663         (cpu_flags): Add CpuL1OM.
 664         (set_bitfield): Take an argument to set the value field.
 665         (process_i386_cpu_flag): Support ~CpuXXX and ~(CpuXXX|CpuYYY).
 666         (process_i386_opcode_modifier): Updated.
 667         (process_i386_operand_type): Likewise.
 668         * i386-init.h: Regenerated.
 669         * i386-tbl.h: Likewise.
 670
 671         * i386-opc.h (CpuL1OM): New.
 672         (CpuXsave): Updated.
 673         (i386_cpu_flags): Add cpul1om.
 674
 675 2009-07-24  Jan Beulich  <jbeulich@novell.com>
 676
 677         * i386-dis.c (fgrps): Correct annotation for feni/fdisi. Add
 678         frstpm.
 679         * i386-gen.c (cpu_flag_init): Add FP enabling flags where needed.
 680         (cpu_flags): Add Cpu8087, Cpu287, Cpu387, Cpu687, and CpuFISTTP.
 681         (set_bitfield): Expand CpuFP to Cpu8087|Cpu287|Cpu387.
 682         * i386-opc.h (Cpu8087, Cpu287, Cpu387, Cpu687, CpuFISTTP):
 683         Define.
 684         (union i386_cpu_flags): Add cpu8087, cpu287, cpu387, cpu687,
 685         and cpufisttp.
 686         * i386-opc.tbl: Qualify floating point instructions by their
 687         respective CpuXXX flag. Fix fucom{,p,pp}, fprem1, fsin, fcos,
 688         and fsincos to be avilable only on 387. Fix fstsw ax to be
 689         available only on 287+. Add f{,n}eni, f{,n}disi, f{,n}setpm,
 690         and frstpm.
 691         * i386-init.h, i386-tbl.h: Regenerate.
 692
 693 2009-07-20  Nick Clifton  <nickc@redhat.com>
 694
 695         PR 10288
 696         * arm-dis.c (arm_opcodes): Catch non-zero bits 8-11 in register
 697         offset or indexed based addressing mode 3.
 698
 699 2009-07-14  Nick Clifton  <nickc@redhat.com>
 700
 701         PR 10288
 702         * arm-dis.c (arm_opcodes): Catch illegal Addressing Mode 1
 703         patterns.
 704         (arm_decode_shift): Catch illegal register based shifts.
 705         (print_insn_arm): Properly handle negative register r0
 706         post-indexed addressing.
 707
 708 2009-07-10  Doug Kwan  <dougkwan@google.com>
 709
 710         * arm-disc.c (print_insn_coprocessor, print_insn_arm):  Print only
 711         lower 32 bits of long types to make hexadecimal output consistent
 712         on both 32-bit and 64-bit hosts.
 713
 714 2009-07-10  Alan Modra  <amodra@bigpond.net.au>
 715
 716         * fr30-desc.c, * fr30-desc.h, * fr30-opc.c, * fr30-opc.h,
 717         * frv-desc.c, * frv-desc.h, * frv-opc.c, * frv-opc.h,
 718         * ip2k-desc.c, * ip2k-desc.h, * ip2k-opc.c, * ip2k-opc.h,
 719         * iq2000-desc.c, * iq2000-desc.h, * iq2000-opc.c, * iq2000-opc.h,
 720         * lm32-desc.c, * lm32-desc.h, * lm32-opc.c, * lm32-opc.h,
 721         * lm32-opinst.c, * m32c-desc.c, * m32c-desc.h, * m32c-opc.c,
 722         * m32c-opc.h, * m32r-desc.c, * m32r-desc.h, * m32r-opc.c,
 723         * m32r-opc.h, * m32r-opinst.c, * mt-desc.c, * mt-desc.h,
 724         * mt-opc.c, * mt-opc.h, * openrisc-desc.c, * openrisc-desc.h,
 725         * openrisc-opc.c, * openrisc-opc.h, * xc16x-desc.c, * xc16x-desc.h,
 726         * xc16x-opc.c, * xc16x-opc.h, * xstormy16-desc.c, * xstormy16-desc.h,
 727         * xstormy16-opc.c, * xstormy16-opc.h: Regenerate.
 728
 729 2009-07-07  Chung-Lin Tang  <cltang@pllab.cs.nthu.edu.tw>
 730
 731         * arm-dis.c (coprocessor_opcodes): Fix mask for waddbhus.
 732
 733 2009-07-07  Nick Clifton  <nickc@redhat.com>
 734
 735         PR 10288
 736         * arm-dis.c (arm_opcodes): Be more strict about decoding scaled
 737         addressing modes.
 738
 739 2009-07-06  DJ Delorie  <dj@redhat.com>
 740
 741         * mep-desc.c: Regenerate.
 742         * mep-desc.h: Regenerate.
 743         * mep-opc.c: Regenerate.
 744         * mep-opc.h: Regenerate.
 745
 746 2009-07-06  Dwarakanath Rajagopal  <dwarak.rajagopal@amd.com>
 747
 748         * i386-opc.h (CpuFMA4): Add CpuFMA4.
 749         (i386_cpu_flags): New.
 750         * i386-gen.c: Add CPU_FMA4_FLAGS.
 751         * i386-opc.tbl: Add FMA4 instructions.
 752         * i386-tbl.h: Regenerate.
 753         * i386-init.h: Regenerate.
 754         * i386-dis.c (OP_VEX_FMA): New. Handle FMA4.
 755         (OP_XMM_VexW): Ditto.
 756         (OP_EX_VexW): Ditto.
 757         (VEXI4_Fixup): Ditto.
 758         (VexI4, VexFMA, Vex128FMA, EXVexW, EXdVexW, XMVexW): New Macros.
 759         (PREFIX_VEX_3A5C, PREFIX_VEX_3A5D, PREFIX_VEX_3A5E): New.
 760         (PREFIX_VEX_3A5F, PREFIX_VEX_3A60): New.
 761         (PREFIX_VEX_3A68, PREFIX_VEX_3A69, PREFIX_VEX_3A6A): New.
 762         (PREFIX_VEX_3A6B, PREFIX_VEX_3A6C, PREFIX_VEX_3A6D): New.
 763         (PREFIX_VEX_3A6E, PREFIX_VEX_3A6F, PREFIX_VEX_3A7A): New.
 764         (PREFIX_VEX_3A7B, PREFIX_VEX_3A7C, PREFIX_VEX_3A7D): New.
 765         (PREFIX_VEX_3A7E, PREFIX_VEX_3A7F): New.
 766         (VEX_LEN_3A6A_P_2,VEX_LEN_3A6B_P_2, VEX_LEN_3A6E_P_2): New.
 767         (VEX_LEN_3A6F_P_2,VEX_LEN_3A7A_P_2, VEX_LEN_3A7B_P_2): New.
 768         (VEX_LEN_3A7E_P_2,VEX_LEN_3A7F_P_2): New.
 769         (get_vex_imm8): New. handle FMA4.
 770         (OP_EX_VexReg): Ditto.
 771
 772 2009-06-30  Nick Clifton  <nickc@redhat.com>
 773
 774         PR 10288
 775         * arm-dis.c (coprocessor): Print the LDC and STC versions of the
 776         LFM and SFM instructions as comments,.
 777         Improve consistency of formatting for instructions displayed as
 778         comments and decimal values displayed with their hexadecimal
 779         equivalents.
 780         Formatting tidy ups.
 781
 782 2009-06-29  Nick Clifton  <nickc@redhat.com>
 783
 784         PR 10288
 785         * arm-dis.c (enum opcode_sentinels): New:  Used to mark the
 786         boundary between variaant and generic coprocessor instuctions.
 787         (coprocessor): Use it.
 788         Fix architecture version of MCRR and MRRC instructions.
 789         (arm_opcdes): Fix patterns for STRB and STRH instructions.
 790         (print_insn_coprocessor): Check architecture and extension masks.
 791         Print a hexadecimal version of any decimal constant that is
 792         outside of the range of -16 to +32.
 793         (print_arm_address): Add a return value of the offset used in the
 794         adress, if it is worth printing a hexadecimal version of it.
 795         (print_insn_neon): Print a hexadecimal version of any decimal
 796         constant that is outside of the range of -16 to +32.
 797         (print_insn_arm): Likewise.
 798         (print_insn_thumb16): Likewise.
 799         (print_insn_thumb32): Likewise.
 800
 801         PR 10297
 802         * arm-dis.c (UNDEFINED_INSTRUCTION): New macro for a description
 803         of an undefined instruction.
 804         (arm_opcodes): Use it.
 805         (thumb_opcod): Use it.
 806         (thumb32_opc): Use it.
 807
 808 2009-06-23  DJ Delorie  <dj@redhat.com>
 809
 810         * mep-desc.c: Regenerate.
 811         * mep-desc.h: Regenerate.
 812         * mep-dis.c: Regenerate.
 813         * mep-ibld.c: Regenerate.
 814         * mep-opc.c: Regenerate.
 815
 816         * mep-asm.c: Regenerate.
 817         * mep-opc.c: Regenerate.
 818         * mep-opc.h: Regenerate.
 819
 820 2009-06-22  Nick Clifton  <nickc@redhat.com>
 821
 822         * po/fi.po: Updated Finish translation.
 823
 824 2009-06-22  Alan Modra  <amodra@bigpond.net.au>
 825
 826         * m32c-asm.c: Regenerate.
 827
 828 2009-06-22  Alan Modra  <amodra@bigpond.net.au>
 829
 830         * score-dis.c (print_insn_score48, print_insn_score32): Move default
 831         case label to proper lexical block.
 832         * score7-dis.c (print_insn_score32): Likewise.
 833
 834 2009-06-19  Martin Schwidefsky  <sschwidefsky@de.ibm.com>
 835
 836         * s390-opc.c (INSTR_RR_0R_OPT, INSTR_RX_0RRD_OPT, MASK_RR_0R_OPT,
 837         MASK_RX_0RRD_OPT): New instruction formats with optional arguments.
 838         * s390-opc.txt (nopr, nop): Use new instruction format.
 839
 840 2009-06-18  Nick Clifton  <nickc@redhat.com>
 841
 842         PR 10288
 843         * arm-dis.c (print_insn_coprocessor): Check that a user specified
 844         ARM architecture supports the matched instruction.
 845         (print_insn_arm): Likewise.
 846         (select_arm_features): New function.  Fills in the fields of an
 847         arm_feature_set structure based on a given arm machine number.
 848         (print_insn): Initialise an arm_feature_set structure.
 849
 850 2009-06-16  Maciej W. Rozycki  <macro@linux-mips.org>
 851
 852         * vax-dis.c (is_function_entry): Return success for synthetic
 853         symbols too.
 854         (is_plt_tail): New function.
 855         (print_insn_vax): Decode PLT entry offset longword.
 856
 857 2009-06-15  Nick Clifton  <nickc@redhat.com>
 858
 859         PR 10186
 860         * arm-dis.c (thumb32_opcodes): Fix binary value of SEV.W
 861         instruction.
 862
 863         PR 10173
 864         * cr16-dis.c (print_arg): Avoid printing the 0x prefix twice.
 865
 866 2009-06-15  Nick Clifton  <nickc@redhat.com>
 867
 868         PR 10263
 869         * arm-dis.c (print_insn): Ignore is_data if the user has requested
 870         the disassembly of data as well as instructions.
 871
 872 2009-06-11  Doug Evans  <dje@sebabeach.org>
 873
 874         * cgen.sh: Handle multiple simultaneous runs for parallel makes.
 875
 876 2009-06-11  Anthony Green  <green@moxielogic.com>
 877
 878         * moxie-opc.c (moxie_form1_opc_info): Remove branch instructions.
 879         (moxie_form3_opc_info): Add branch instructions.
 880         * moxie-dis.c (print_insn_moxie): Disassemble MOXIE_F3_PCREL
 881         encoded instructions.
 882
 883 2009-06-06  Anthony Green  <green@moxielogic.com>
 884
 885         * moxie-opc.c: Recode some MOXIE_F1_4 opcodes as MOXIE_F1_M.
 886         * moxie-dis.c (print_insn_moxie): Handle MOXIE_F1_M case.
 887
 888 2009-06-04  Alan Modra  <amodra@bigpond.net.au>
 889
 890         * dep-in.sed: Don't use \n in replacement part of s command.
 891         * Makefile.am (DEP1): LC_ALL for uniq.
 892         * Makefile.in: Regenerate.
 893
 894 2009-06-02  Nick Clifton  <nickc@redhat.com>
 895
 896         * po/nl.po: Updated Dutch translation.
 897
 898 2009-06-02  Tristan Gingold  <gingold@adacore.com>
 899
 900         * ia64-gen.c (parse_resource_users, print_dependency_table,
 901         add_dis_table_ent, finish_distable, insert_bit_table_ent,
 902         add_dis_entry, compact_distree, gen_dis_table, completer_entries_eq,
 903         get_prefix_len, compute_completer_bits, insert_opcode_dependencies,
 904         insert_completer_entry, print_completer_entry, print_completer_table,
 905         opcodes_eq, add_opcode_entry, shrink): Use ISO C syntax for functions.
 906
 907 2009-05-28  DJ Delorie  <dj@redhat.com>
 908
 909         * mep-asm.c: Regenerate.
 910         * mep-desc.c: Regenerate.
 911
 912 2009-05-26  DJ Delorie  <dj@redhat.com>
 913
 914         * mep-asm.c: Regenerate.
 915         * mep-desc.c: Regenerate.
 916         * mep-desc.h: Regenerate.
 917         * mep-dis.c: Regenerate.
 918         * mep-ibld.c: Regenerate.
 919         * mep-opc.c: Regenerate.
 920         * mep-opc.h: Regenerate.
 921
 922 2009-05-26  Nick Clifton  <nickc@redhat.com>
 923
 924         * po/id.po: Updated Indonesian translation.
 925         * po/opcodes.pot: Updated template file.
 926
 927 2009-05-26  Alan Modra  <amodra@bigpond.net.au>
 928
 929         * dep-in.sed: Don't modify .o to .lo here.  Output one filename
 930         per line with all lines having continuation backslash.  Prefix
 931         first line with "A", following lines with "B".
 932         * Makefile.am (DEP): Don't use dep.sed here.
 933         (DEP1): Run $MKDEP on single files, modify .o to .lo here.  Use
 934         dep.sed here on dependencies, sort and uniq.
 935         * Makefile.in: Regenerate.
 936
 937 2009-05-25  Tristan Gingold  <gingold@adacore.com>
 938
 939         * makefile.vms (OPT): New variable.
 940         (CFLAGS): Update compilation flags.
 941
 942 2009-05-22  DJ Delorie  <dj@redhat.com>
 943
 944         * mep-asm.c: Regenerate.
 945         * mep-desc.c: Regenerate.
 946         * mep-desc.h: Regenerate.
 947         * mep-dis.c: Regenerate.
 948         * mep-ibld.c: Regenerate.
 949         * mep-opc.c: Regenerate.
 950         * mep-opc.h: Regenerate.
 951
 952 2009-05-22  Dwarakanath Rajagopal  <dwarak.rajagopal@amd.com>
 953
 954         * i386-opc.h (Cpusse5): Delete.
 955         (i386_cpu_flags): Delete.
 956         * i386-gen.c: Remove CpuSSE5, Drex, Drexv and Drexc.
 957         * i386-opc.tbl: Remove SSE5 instructions.
 958         * i386-tbl.h: Regenerate.
 959         * i386-init.h: Regenerate.
 960         * i386-dis.c (OP_E_memeory, OP_E_extended): Remove drex handling.
 961         (print_drex_arg): Delete.
 962         (OP_DREX4): Delete.
 963         (OP_DREX3): Delete.
 964         (OP_DREX_ICMP): Delete.
 965         (OP_DREX_FCMP): Delete.
 966         (DREX_*): Delete.
 967         (THREE_BYTE_0F24, THREE_BYTE_0F25, THREE_BYTE_0f7B): Delete.
 968
 969 2009-05-22  Alan Modra  <amodra@bigpond.net.au>
 970
 971         * Makefile.am: Run "make dep-am".
 972         * Makefile.in: Regenerate.
 973         * po/POTFILES.in: Regenerate.
 974
 975 2009-05-19  DJ Delorie  <dj@redhat.com>
 976
 977         * mep-asm.c: Regenerate.
 978         * mep-opc.c: Regenerate.
 979
 980 2009-04-30  DJ Delorie  <dj@redhat.com>
 981
 982         * mep-asm.c: Regenerate.
 983         * mep-desc.c: Regenerate.
 984         * mep-desc.h: Regenerate.
 985         * mep-dis.c: Regenerate.
 986         * mep-ibld.c: Regenerate.
 987         * mep-opc.c: Regenerate.
 988         * mep-opc.h: Regenerate.
 989
 990 2009-04-17  DJ Delorie  <dj@redhat.com
 991
 992         * mep-desc.c: Regenerate.
 993         * mep-ibld.c: Regenerate.
 994         * mep-opc.c: Regenerate.
 995         * mep-opc.h: Regenerate.
 996
 997 2009-04-15  Anthony Green  <green@moxielogic.com>
 998
 999         * moxie-opc.c, moxie-dis.c: Created.
1000         * Makefile.am: Build the moxie source files.
1001         * configure.in: Add moxie support.
1002         * Makefile.in, configure: Rebuilt.
1003         * disassemble.c (disassembler): Add moxie support.
1004         (ARCH_moxie): Define.
1005
1006 2009-04-15  Jan Beulich  <jbeulich@novell.com>
1007
1008         * i386-opc.tbl (protb, protw, protd, protq): Set opcode
1009         extension to None.
1010         (pshab, pshaw, pshad, pshaq): Likewise.
1011         * i386-tbl.h: Re-generate.
1012
1013 2009-04-08  DJ Delorie  <dj@redhat.com
1014
1015         * mep-asm.c: Regenerate.
1016         * mep-desc.c: Regenerate.
1017         * mep-desc.h: Regenerate.
1018         * mep-dis.c: Regenerate.
1019         * mep-ibld.c: Regenerate.
1020         * mep-opc.c: Regenerate.
1021         * mep-opc.h: Regenerate.
1022
1023 2009-04-07  Peter Bergner  <bergner@vnet.ibm.com>
1024
1025         * ppc-opc.c (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva",
1026         "tlbilx">: Use secondary opcode "18" as per the ISA 2.06 documentation.
1027         Reorder entries so the extended mnemonics are listed before tlbilx.
1028
1029 2009-04-02  Peter Bergner  <bergner@vnet.ibm.com>
1030
1031         * ppc-dis.c (powerpc_init_dialect): Do not choose a default dialect
1032         due to -many/-Many.
1033         (print_insn_powerpc): Make sure we only deprecate instructions using
1034         the original dialect and not a modified dialect due to -Many handling.
1035         Move the handling of the condition register and default operands to
1036         the end of the if/else if/else chain.
1037         * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
1038         instructions from newer processors are listed before older ones.
1039         <"icblce", "sync", "eieio", "tlbld">: Deprecate for processors
1040         that have instructions with conflicting opcodes.
1041
1042 2009-04-01  Peter Bergner  <bergner@vnet.ibm.com>
1043
1044         * ppc-opc.c (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and
1045         E500MC entries.
1046
1047 2009-04-01  Christophe Lyon  <christophe.lyon@st.com>
1048
1049         * arm-dis.c (print_insn): Print BE8 opcodes in little endianness.
1050
1051 2009-03-30  Joseph Myers  <joseph@codesourcery.com>
1052
1053         * arm-dis.c (print_insn): Also check section matches in backwards
1054         search for mapping symbol.
1055
1056 2009-03-26  H.J. Lu  <hongjiu.lu@intel.com>
1057
1058         * i386-dis.c (get_valid_dis386): Abort on unhandled table.
1059
1060 2009-03-18  Alan Modra  <amodra@bigpond.net.au>
1061
1062         * cgen-opc.c: Include alloca-conf.h rather than alloca.h.
1063         * Makefile.am: Run "make dep-am".
1064         * Makefile.in: Regenerate.
1065         * openrisc-opc.c: Regenerate.
1066
1067 2009-03-10  Nick Clifton  <nickc@redhat.com>
1068
1069         * po/id.po: Updated Indonesian translation.
1070
1071 2009-03-10  Alan Modra  <amodra@bigpond.net.au>
1072
1073         * ppc-dis.c: Include "opintl.h".
1074         (struct ppc_mopt, ppc_opts): New.
1075         (ppc_parse_cpu): New function.
1076         (powerpc_init_dialect): Use it.
1077         (print_ppc_disassembler_options): Dump options from ppc_opts.
1078         Internationalize message.
1079
1080 2009-03-06  Nick Clifton  <nickc@redhat.com>
1081
1082         * po/es.po: Updated Spanish translation.
1083
1084 2009-03-04  Alan Modra  <amodra@bigpond.net.au>
1085
1086         PR 6768
1087         * configure.in: Test for ld --as-needed support.  Link shared
1088         libopcodes against libm.
1089         * configure: Regenerate.
1090
1091 2009-03-03  Peter Bergner  <bergner@vnet.ibm.com>
1092
1093         * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
1094         instructions from newer processors are listed before older ones.
1095
1096 2009-03-03  Alan Modra  <amodra@bigpond.net.au>
1097
1098         * Makefile.am: Run "make dep-am".
1099         (HFILES): Move lm32-desc.h and lm32-opc.h from..
1100         (CFILES): ..here.
1101         * Makefile.in: Regenerate.
1102
1103 2009-03-02  Qinwei  <qinwei@sunnorth.com.cn>
1104
1105         * score7-dis.c: New file.
1106         * Makefile.am: Add dependencies for score7-dis.c.
1107         * Makefile.in: Regenerate.
1108         * configure.in: Add score7-dis to score files.
1109         * configure: Regenerate.
1110         * score-dis.c: Add support for score7 architecture.
1111         * score-opc.h: Likewise.
1112
1113 2009-03-01  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
1114
1115         * configure: Regenerate.
1116
1117 2009-02-27  H.J. Lu  <hongjiu.lu@intel.com>
1118
1119         * i386-dis.c (OP_EX): Call OP_E_memory instead of OP_E.
1120
1121 2009-02-26  Peter Bergner  <bergner@vnet.ibm.com>
1122
1123         * ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble
1124         the power7 and the isel instructions.
1125         * ppc-opc.c (insert_xc6, extract_xc6): New static functions.
1126         (insert_dm, extract_dm): Likewise.
1127         (XB6): Update comment to include XX2 form.
1128         (WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK,
1129         XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New.
1130         (RemoveXX3DM): Delete.
1131         (powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr",
1132         "mftgpr">: Deprecate for POWER7.
1133         <"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte",
1134         "frsqrte.">: Deprecate the three operand form and enable the two
1135         operand form for POWER7 and later.
1136         <"wait">: Extend to accept optional parameter.  Enable for POWER7.
1137         <"waitsrv", "waitimpl">: Add extended opcodes.
1138         <"ldbrx", "stdbrx">: Enable for POWER7.
1139         <"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes.
1140         <"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde",
1141         "divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo",
1142         "divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.",
1143         "divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.",
1144         "fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.",
1145         "fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx",
1146         "lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes.
1147         <"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx",
1148         "stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp",
1149         "xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds",
1150         "xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp",
1151         "xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp",
1152         "xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp",
1153         "xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic",
1154         "xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp",
1155         "xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp",
1156         "xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp",
1157         "xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.",
1158         "xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp",
1159         "xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp",
1160         "xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp",
1161         "xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp",
1162         "xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp",
1163         "xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp",
1164         "xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp",
1165         "xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp",
1166         "xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp",
1167         "xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi",
1168         "xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp",
1169         "xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp",
1170         "xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp",
1171         "xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor",
1172         "xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd",
1173         "xxspltw", "xxswapd">: Add VSX opcodes.
1174
1175 2009-02-23  H.J. Lu  <hongjiu.lu@intel.com>
1176
1177         * i386-gen.c (operand_type_init): Remove OPERAND_TYPE_VEX_IMM4.
1178         (operand_types): Remove Vex_Imm4.
1179
1180         * i386-opc.h (Vex_Imm4): Removed.
1181         (OTMax): Updated.
1182         (i386_operand_type): Remove vex_imm4.
1183
1184         * i386-opc.tbl: Remove Vex_Imm4 comments.
1185         * i386-init.h: Regenerated.
1186         * i386-tbl.h: Likewise.
1187
1188 2009-02-23  Richard Earnshaw  <rearnsha@arm.com>
1189
1190         * arm-dis.c (neon_opcodes): Correct bit-mask and patterns for
1191         vq{r}shr{u}n.s64 insnstructions.
1192
1193 2009-02-19  Peter Bergner  <bergner@vnet.ibm.com>
1194
1195         * ppc-opc.c (powerpc_opcodes) <"lfdepx", "stfdepx">: Fix the first
1196         operand to be a float point register (FRT/FRS).
1197
1198 2009-02-18  Adam Nemet  <anemet@caviumnetworks.com>
1199
1200         * mips-opc.c (mips_builtin_opcodes): Move the Octeon-specific
1201         dmfc2 and dmtc2 before the architecture-level variants.
1202
1203 2009-02-18  Pierre Muller  <muller@ics.u-strasbg.fr>
1204
1205         * fr30-opc.c: Regenerate.
1206         * frv-opc.c: Regenerate.
1207         * ip2k-opc.c: Regenerate.
1208         * iq2000-opc.c: Regenerate.
1209         * lm32-opc.c: Regenerate.
1210         * m32c-opc.c: Regenerate.
1211         * m32r-opc.c: Regenerate.
1212         * mep-opc.c: Regenerate.
1213         * mt-opc.c: Regenerate.
1214         * xc16x-opc.c: Regenerate.
1215         * xstormy16-opc.c: Regenerate.
1216         * tic54x-dis.c (print_instruction): Avoid compiler warning on
1217         sprintf call.
1218
1219 2009-02-12  Nathan Sidwell  <nathan@codesourcery.com>
1220
1221         * m68k-opc.c (m68k_opcodes): Add stldsr instruction.
1222
1223 2009-02-05  Peter Bergner  <bergner@vnet.ibm.com>
1224
1225         * ppc-opc.c: Update copyright year.
1226         (powerpc_opcodes) <"dcbt", "dcbtst">: Deprecate the Embedded operand
1227         ordering for POWER4 and later and use the correct Server ordering.
1228
1229 2009-02-04  H.J. Lu  <hongjiu.lu@intel.com>
1230
1231         AVX Programming Reference (January, 2009)
1232         * i386-dis.c (PREFIX_VEX_3A44): New.
1233         (VEX_LEN_3A44_P_2): Likewise.
1234         (PREFIX_VEX_3A48): Updated.
1235         (VEX_LEN_3A4C_P_2): Likewise.
1236         (prefix_table): Add PREFIX_VEX_3A44.
1237         (vex_table): Likewise.
1238         (vex_len_table): Add VEX_LEN_3A44_P_2.
1239
1240         * i386-opc.tbl: Add PCLMUL + AVX instructions.
1241         * i386-tbl.h: Regenerated.
1242
1243 2009-02-03  Sandip Matte  <sandip@rmicorp.com>
1244
1245         * mips-dis.c (mips_cp0_names_xlr, mips_cp0sel_names_xlr): Define.
1246         (mips_arch_choices): Add XLR entry.
1247         * mips-opc.c (XLR): Define.
1248         (mips_builtin_opcodes): Add XLR instructions.
1249
1250 2009-02-03  Carlos O'Donell  <carlos@codesourcery.com>
1251
1252         * Makefile.am: Add install-pdf target.
1253         * po/Make-in: Add install-pdf target.
1254         * Makefile.in: Regenerate.
1255
1256 2009-02-02  DJ Delorie  <dj@redhat.com>
1257
1258         * mep-asm.c: Regenerate.
1259         * mep-desc.c: Regenerate.
1260         * mep-desc.h: Regenerate.
1261         * mep-dis.c: Regenerate.
1262         * mep-ibld.c: Regenerate.
1263         * mep-opc.c: Regenerate.
1264         * mep-opc.h: Regenerate.
1265
1266 2009-01-29  Mark Mitchell  <mark@codesourcery.com>
1267
1268         * arm-dis.c (thumb32_opcodes): Correct decoding for qadd, qdadd,
1269         qsub, and qdsub.
1270
1271 2009-01-28  Chao-ying Fu  <fu@mips.com>
1272
1273         * mips-opc.c (suxc1): Add the flag of FP_D.
1274
1275 2009-01-20  Alan Modra  <amodra@bigpond.net.au>
1276
1277         * fr30-asm.c, fr30-dis.c, fr30-ibld.c, frv-asm.c, frv-dis.c,
1278         * frv-ibld.c, ip2k-asm.c, ip2k-dis.c, ip2k-ibld.c,
1279         * iq2000-asm.c, iq2000-dis.c, iq2000-ibld.c, m32c-asm.c,
1280         * m32c-dis.c, m32c-ibld.c, m32r-asm.c, m32r-dis.c,
1281         * m32r-ibld.c, mep-asm.c, mep-dis.c, mep-ibld.c, mt-asm.c,
1282         * mt-dis.c, mt-ibld.c, openrisc-asm.c, openrisc-dis.c,
1283         * openrisc-ibld.c, xc16x-asm.c, xc16x-dis.c, xc16x-ibld.c,
1284         * xstormy16-asm.c, xstormy16-dis.c, xstormy16-ibld.c: Regenerate.
1285
1286 2009-01-16  Alan Modra  <amodra@bigpond.net.au>
1287
1288         * configure.in (commonbfdlib): Delete.
1289         (SHARED_LIBADD): Add pic libiberty if such is available.
1290         * configure: Regenerate.
1291         * po/POTFILES.in: Regenerate.
1292
1293 2009-01-14  Peter Bergner  <bergner@vnet.ibm.com>
1294
1295         * ppc-dis.c (print_insn_powerpc): Skip insn if it is deprecated.
1296         * ppc-opc.c (powerpc_opcodes) <mtfsf, mtfsf.>: Deprecate the two
1297         operand form and enable the four operand form for POWER6 and later.
1298         <mtfsfi, mtfsfi.>: Deprecate the two operand form and enable the
1299         three operand form for POWER6 and later.
1300
1301 2009-01-14  Mike Frysinger  <vapier@gentoo.org>
1302
1303         * bfin-dis.c (OUTS): Use "%s" as format string.
1304
1305 2009-01-13  H.J. Lu  <hongjiu.lu@intel.com>
1306
1307         * i386-gen.c (cpu_flag_init): Remove a white space.
1308         (operand_type_init): Likewise.
1309
1310 2009-01-12  H.J. Lu  <hongjiu.lu@intel.com>
1311
1312         * i386-opc.tbl: Add NoAVX to movnti, lfence and mfence.
1313         * i386-tbl.h: Regenerated.
1314
1315 2009-01-12  H.J. Lu  <hongjiu.lu@intel.com>
1316
1317         * i386-dis.c (dis386): Use EbS on addB, orB, adcB, sbbB, andB,
1318         subB, xorB and cmpB.  Use EvS on addS, orS, adcS, sbbS, andS,
1319         subS, xorS and cmpS.
1320
1321 2009-01-10  H.J. Lu  <hongjiu.lu@intel.com>
1322
1323         * i386-gen.c (cpu_flag_init): Replace CpuP4 and CpuK6 with
1324         CpuClflush and CpuSYSCALL, respectively. Remove CpuK8.  Add
1325         CPU_COREI7_FLAGS, CPU_CLFLUSH_FLAGS and CPU_SYSCALL_FLAGS.
1326         (cpu_flags): Remove CpuP4, CpuK6 and CpuK8.  Add CpuClflush
1327         and CpuSYSCALL.
1328         (lineno): Removed.
1329         (set_bitfield): Take an argument, lineno.  Don't report lineno
1330         on error if it is -1.
1331         (process_i386_cpu_flag): Take an argument, lineno.
1332         (process_i386_opcode_modifier): Likewise.
1333         (process_i386_operand_type): Likewise.
1334         (output_i386_opcode): Likewise.
1335         (opcode_hash_entry): Add lineno.
1336         (process_i386_opcodes): Updated.
1337         (process_i386_registers): Likewise.
1338         (process_i386_initializers): Likewise.
1339
1340         * i386-opc.h (CpuP4): Removed.
1341         (CpuK6): Likewise.
1342         (CpuK8): Likewise.
1343         (CpuClflush): New.
1344         (CpuSYSCALL): Likewise.
1345         (CpuMMX): Updated.
1346         (i386_cpu_flags): Remove cpup4, cpuk6 and cpuk8.  Add
1347         cpuclflush and cpusyscall.
1348
1349         * i386-opc.tbl: Update movnti, clflush, lfence, mfence, pause,
1350         syscall and sysret.
1351         * i386-init.h: Regenerated.
1352         * i386-tbl.h: Likewise.
1353
1354 2009-01-09  H.J. Lu  <hongjiu.lu@intel.com>
1355
1356         * i386-gen.c (cpu_flag_init): Add CpuRdtscp to CPU_K8_FLAGS
1357         and CPU_AMDFAM10_FLAGS.  Add CPU_RDTSCP_FLAGS.
1358         (cpu_flags): Add CpuRdtscp.
1359         (set_bitfield): Remove CpuSledgehammer check.
1360
1361         * i386-opc.h (CpuRdtscp): New.
1362         (CpuLM): Updated.
1363         (i386_cpu_flags): Add cpurdtscp.
1364
1365         * i386-opc.tbl: Replace CpuSledgehammer with CpuRdtscp.
1366         * i386-init.h: Regenerated.
1367         * i386-tbl.h: Likewise.
1368
1369 2009-01-09  Peter Bergner  <bergner@vnet.ibm.com>
1370
1371         * ppc-opc.c (PPCNONE): Define.
1372         (NOPOWER4): Delete.
1373         (powerpc_opcodes): Initialize the new "deprecated" field.
1374
1375 2009-01-06  H.J. Lu  <hongjiu.lu@intel.com>
1376
1377         AVX Programming Reference (December, 2008)
1378         * i386-dis.c (VEX_LEN_2B_M_0): Removed.
1379         (VEX_LEN_E7_P_2_M_0): Likewise.
1380         (VEX_LEN_2C_P_1): Updated.
1381         (VEX_LEN_E8_P_2): Likewise.
1382         (vex_len_table): Remove VEX_LEN_2B_M_0 and VEX_LEN_E7_P_2_M_0.
1383         (mod_table): Likewise.
1384
1385         * i386-opc.tbl: Add 256bit vmovntdq, vmovntpd and vmovntps.
1386         * i386-tbl.h: Regenerated.
1387
1388 2009-01-05  H.J. Lu  <hongjiu.lu@intel.com>
1389
1390         * i386-gen.c (process_copyright): Update for 2009.
1391
1392         * i386-init.h: Regenerated.
1393         * i386-tbl.h: Likewise.
1394
1395 2009-01-05  H.J. Lu  <hongjiu.lu@intel.com>
1396
1397         AVX Programming Reference (December, 2008)
1398         * i386-dis.c (OP_VEX_FMA): Removed.
1399         (OP_EX_VexW): Likewise.
1400         (OP_EX_VexImmW): Likewise.
1401         (OP_XMM_VexW): Likewise.
1402         (VEXI4_Fixup): Likewise.
1403         (VPERMIL2_Fixup): Likewise.
1404         (VexI4): Likewise.
1405         (VexFMA): Likewise.
1406         (Vex128FMA): Likewise.
1407         (EXVexW): Likewise.
1408         (EXdVexW): Likewise.
1409         (EXqVexW): Likewise.
1410         (EXVexImmW): Likewise.
1411         (XMVexW): Likewise.
1412         (VPERMIL2): Likewise.
1413         (PREFIX_VEX_3A48...PREFIX_VEX_3A4A): Likewise.
1414         (PREFIX_VEX_3A5C...PREFIX_VEX_3A5F): Likewise.
1415         (PREFIX_VEX_3A68...PREFIX_VEX_3A6F): Likewise.
1416         (PREFIX_VEX_3A78...PREFIX_VEX_3A7F): Likewise.
1417         (VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2): Likewise.
1418         (VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2): Likewise.
1419         (get_vex_imm8): Likewise.
1420         (OP_EX_VexReg): Likewise.
1421         vpermil2_op): Likewise.
1422         (EXVexWdq): New.
1423         (vex_w_dq_mode): Likewise.
1424         (PREFIX_VEX_3896...PREFIX_VEX_389F): Likewise.
1425         (PREFIX_VEX_38A6...PREFIX_VEX_38AF): Likewise.
1426         (PREFIX_VEX_38B6...PREFIX_VEX_38BF): Likewise.
1427         (es_reg): Updated.
1428         (PREFIX_VEX_38DB): Likewise.
1429         (PREFIX_VEX_3A4A): Likewise.
1430         (PREFIX_VEX_3A60): Likewise.
1431         (PREFIX_VEX_3ADF): Likewise.
1432         (VEX_LEN_3ADF_P_2): Likewise.
1433         (prefix_table): Remove PREFIX_VEX_3A48...PREFIX_VEX_3A4A,
1434         PREFIX_VEX_3A5C...PREFIX_VEX_3A5F,
1435         PREFIX_VEX_3A68...PREFIX_VEX_3A6F and
1436         PREFIX_VEX_3A78...PREFIX_VEX_3A7F.  Add
1437         PREFIX_VEX_3896...PREFIX_VEX_389F,
1438         PREFIX_VEX_38A6...PREFIX_VEX_38AF and
1439         PREFIX_VEX_38B6...PREFIX_VEX_38BF.
1440         (vex_table): Likewise.
1441         (vex_len_table): Remove VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2
1442         and VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2.
1443         (putop): Support "%XW".
1444         (intel_operand_size): Handle vex_w_dq_mode.
1445
1446         * i386-opc.h (VexNDS): Add a comment for VEX NDS and VEX DDS.
1447
1448         * i386-opc.tbl: Remove vpermil2pd/vpermil2ps and old FMA
1449         instructions.  Add new FMA instructions.
1450         * i386-tbl.h: Regenerated.
1451
1452 2009-01-02  Matthias Klose  <doko@ubuntu.com>
1453
1454         * or32-opc.c (or32_print_register, or32_print_immediate,
1455         disassemble_insn): Don't rely on undefined sprintf behaviour.
1456
1457 For older changes see ChangeLog-2008
1458 \f
1459 Local Variables:
1460 mode: change-log
1461 left-margin: 8
1462 fill-column: 74
1463 version-control: never
1464 End: