1 2001-07-12 Jeff Johnston <jjohnstn@redhat.com>
3 * cgen-asm.in: Include "xregex.h" always to enable the libiberty
5 (@arch@_cgen_build_insn_regex): New routine from Graydon.
6 (@arch@_cgen_assemble_insn): Add Graydon's code to use regex
7 to verify if it is worth parsing the insn as insn "x". Also update
8 error message when insn is not a recognized format of the insn vs
9 when the insn is completely unrecognized.
11 2001-07-11 Frank Ch. Eigler <fche@redhat.com>
13 * cgen-dis.in (print_insn): Use cgen_get_insn_value instead of
15 * cgen-opc.c (cgen_get_insn_value, cgen_put_insn_value): Respect
16 non-zero CGEN_CPU_DESC->insn_chunk_bitsize.
18 2001-07-09 Andreas Jaeger <aj@suse.de>, Karsten Keil <kkeil@suse.de>
20 * i386-dis.c (set_op): Handle 64 bit and 32 bit mode.
21 (OP_J): Use bfd_vma for mask to work properly with 64 bits.
22 (op_address,op_riprel): Use bfd_vma to handle 64 bits.
24 2001-07-05 Ben Elliston <bje@redhat.com>
26 * Makefile.am (CPUDIR): Define.
27 (stamp-m32r): Update dependencies.
29 (stamp-openrisc): Ditto.
30 * Makefile.in: Regenerate.
32 2001-07-03 Zoltan Hidvegi <hzoli@hzoli.2y.net>
34 * ppc-opc.c: Fix encoding of 'clf' instruction.
36 2001-06-30 Geoffrey Keating <geoffk@redhat.com>
38 * cgen-ibld.in (insert_normal): Support CGEN_IFLD_SIGN_OPT.
40 2001-06-28 Geoffrey Keating <geoffk@redhat.com>
42 * cgen-asm.c (cgen_parse_keyword): Allow any first character.
43 * cgen-opc.c (cgen_keyword_add): Ignore special first
44 character when building nonalpha_chars field.
46 2001-06-24 Ben Elliston <bje@redhat.com>
48 * m88k-dis.c: Format to conform to GNU coding standards.
50 2001-06-23 Andreas Jaeger <aj@suse.de>
52 * disassemble.c (disassembler_usage): Add unused attribute.
54 2001-06-22 Eric Christopher <echristo@redhat.com>
56 * mips-opc.c: Move prefx to start of the table.
58 2001-06-22 Stacey Sheldon <ssheldon@Catena.com>
60 * arc-opc.c (insert_st_syntax): Fix over-optimisation of ST
63 2001-06-22 Pauli <pauli@moreton.com.au>
65 * m68k-opc.c: Add wdebug instruction.
67 2001-06-15 Aldy Hernandez <aldyh@redhat.com>
69 * m10300-opc.c (mn10300_opcodes): Change opcode for AM33 subc.
71 2001-06-14 Geoffrey Keating <geoffk@redhat.com>
73 * cgen-asm.c (cgen_parse_keyword): When looking for the
74 boundaries of a keyword, allow any special characters
75 that are actually in one of the allowed keyword.
76 * cgen-opc.c (cgen_keyword_add): Add any special characters
77 to the nonalpha_chars field.
79 2001-06-12 Martin Schwidefsky <schwidefsky@de.ibm.com>
81 * s390-opc.c: Add lgh instruction.
82 * s390-opc.txt: Likewise.
84 2001-06-11 Alan Modra <amodra@bigpond.net.au>
86 * i386-dis.c: Group function prototypes in one place.
87 (FLOATCODE): Redefine as 1.
88 (USE_GROUPS): Redefine as 2.
89 (USE_PREFIX_USER_TABLE): Redefine as 3.
90 (X86_64_SPECIAL): Define as 4.
91 (GRP1b..GRPAMD): Move USE_GROUPS to bytecode1, index to bytecode2.
92 (PREGRP0..PREGRP26): Similarly with USE_PREFIX_USER_TABLE.
93 (dis386_att, dis386_intel, disx86_64_att, disx86_64_intel): Delete.
94 (dis386): New table combining above four tables.
95 (dis386_twobyte_att, dis386_twobyte_intel): Delete.
96 (dis386_twobyte): New table combining above two tables.
97 (x86_64_table): New table to handle x86_64.
99 (float_mem_att, float_mem_intel): Delet.
100 (float_mem): New table combining above two tables.
101 (print_insn_i386): Modify for above.
103 (putop): Handle '{', '|' and '}' to select alternative mnemonics.
104 Return 0 on success, 1 if no valid alternative.
105 (putop <case 'F'>, <case 'H'>): Print nothing for intel_syntax.
106 (putop <case 'T'>): Move to case 'U', and share case 'Q' code.
107 (putop <case 'I'>): Move to case 'T', and share case 'P' code.
108 (OP_REG <case rAX_reg .. rDI_reg>): Handle as for eAX_reg .. eDI_reg
110 (OP_I <case q_mode>): Handle as for v_mode if not 64-bit mode.
111 (OP_I64): If not 64-bit mode, call OP_I.
112 OP_OFF64): If not 64-bit mode, call OP_OFF.
113 (OP_ST, OP_STi, OP_SEG, OP_DIR, OP_OFF, OP_OFF64, OP_MMX): Rename
114 'ignore'/'ignored' to 'bytemode'.
116 2001-06-10 Alan Modra <amodra@bigpond.net.au>
118 * configure.in: Sort 'ta' case statement.
119 * configure: Regenerate.
121 * i386-dis.c (dis386_att): Add 'H' to conditional branch and
123 (disx86_64_att): Likewise.
124 (dis386_twobyte_att): Likewise.
125 (print_insn_i386): Don't print branch hints as a prefix.
126 (putop): 'H' macro prints branch hints.
127 (get64): Kill compile warnings.
129 2001-06-09 Alexandre Oliva <aoliva@redhat.com>
131 * sh-opc.h (sh_table): Don't use empty initializers.
133 2001-06-06 Christian Groessler <cpg@aladdin.de>
135 * z8k-dis.c: Fix formatting.
136 (unpack_instr): Remove unused cases in switch statement. Add
137 safety abort() in default case.
138 (unparse_instr): Add safety abort() in default case.
140 2001-06-06 Peter Jakubek <pjak@snafu.de>
142 * m68k-dis.c (print_insn_m68k): Fix typo.
143 * m68k-opc.c (m68k_opcodes): Correct allowed operands for
144 mcf (ColdFire) div, rem and moveb instructions.
146 2001-06-06 Alan Modra <amodra@bigpond.net.au>
148 * i386-dis.c (cond_jump_flag, loop_jcxz_flag): Define.
149 (cond_jump_mode, loop_jcxz_mode): Define.
150 (dis386_att): Add cond_jump_flag and loop_jcxz_flag as
151 appropriate, and 'F' suffix to loop insns.
152 (disx86_64_att): Likewise.
153 (dis386_twobyte_att): Likewise.
154 (print_insn_i386): Don't output addr prefix for loop, jcxz insns.
155 Output data size prefix for long conditional jumps. Output cs and
157 (putop): Handle 'F', and mark PREFIX_ADDR used for case 'E'.
158 (OP_J): Don't make PREFIX_DATA used.
160 2001-06-04 Alexandre Oliva <aoliva@redhat.com>
162 * sh-opc.h (sh_table): Complete last element entry to avoid
165 2001-05-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
167 * mips-dis.c (mips_isa_type): Add MIPS r12k support.
169 2001-05-23 Alan Modra <amodra@one.net.au>
171 * arc-opc.c: Whitespace changes.
173 2001-05-18 Hans-Peter Nilsson <hp@axis.com>
175 * cris-opc.c (cris_spec_regs): Add missing initializer field for
178 2001-05-15 Frank Ch. Eigler <fche@redhat.com>
180 * cgen-dis.in (extract_normal): Complete support for min<base case.
182 2001-05-15 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
184 * mips-dis.c (INSNLEN): Rename MAXLEN.
185 (std_reg_names): Replace by mips32_reg_names and mips64_reg_names.
186 (print_insn_arg): Remove $ prefix of register names.
187 (set_mips_isa_type): Remove.
188 (mips_isa_type): New function.
189 (get_mips_isa): New Function.
190 (print_insn_mips): Rename _print_insn_mips.
191 (_print_insn_mips): New function, contains code which was
192 duplicated in print_insn_big_mips and print_insn_little_mips.
193 (print_insn_big_mips): Moved code to _print_insn_mips.
194 (print_insn_little_mips): Likewise.
195 (print_mips16_insn_arg): Remove $ prefix of register names.
196 Print error message before abort.
198 2001-05-14 J.T. Conklin <jtc@redback.com>
200 * ppc-opc.c (powerpc_opcodes): Fixed extended opcode field of
201 simplified mnemonics used for setting PPC750-specific special
204 2001-05-12 H.J. Lu <hjl@gnu.org>
206 * i386-dis.c (print_insn_i386): Always set `mod', `reg' and
209 2001-05-12 Peter Targett <peter.targett@arccores.com>
211 * arc-opc.c (arc_reg_names): Correct attribute for lp_count
212 register to r/w. Formatting fixes throughout file.
214 2001-05-12 Alan Modra <amodra@one.net.au>
216 * i386-dis.c (prefix_user_table): Correct movq2dq, movdq2q, and
218 (twobyte_has_modrm): Update table.
219 (need_modrm): Give it file scope.
220 (MODRM_CHECK): Define.
221 (dofloat): Use MODRM_CHECK.
226 2001-05-07 Frank Ch. Eigler <fche@redhat.com>
228 * cgen-dis.in (default_print_insn): Tolerate min<base instructions
229 even at end of a section.
230 * cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
231 by ignoring precariously-unpacked insn_value in favor of raw buffer.
233 2001-05-03 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
235 * disassemble.c (disassembler_usage): Remove unused attribute.
237 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
239 * m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
241 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
243 * cgen-dis.in (print_insn): Remove call to read_insn. Instead,
244 assume incoming buffer already has the base insn loaded. Handle
245 smaller-than-base instructions for variable-length case.
247 2001-05-04 Alan Modra <amodra@one.net.au>
249 * i386-dis.c (Ev, Ed): Remove duplicate define.
252 (OP_XS): New function.
253 (dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
255 (dis386_twobyte_intel): Likewise.
256 (prefix_user_table): Use MS for maskmovq operand.
258 2001-04-27 Johan Rydberg <jrydberg@opencores.org>
260 * Makefile.am: Add OpenRISC target.
261 * Makefile.in: Regenerated.
263 * disassemble.c (disassembler): Recognize the OpenRISC disassembly.
265 * configure.in (bfd_openrisc_arch): Add target.
266 * configure: Regenerated.
268 * openrisc-asm.c: New file.
269 * openrisc-desc.c: Likewise.
270 * openrisc-desc.h: Likewise.
271 * openrisc-dis.c: Likewise.
272 * openrisc-ibld.c: Likewise.
273 * openrisc-opc.c: Likewise.
274 * openrisc-opc.h: Likewise.
276 2001-04-24 Christian Groessler <cpg@aladdin.de>
278 * z8k-dis.c: add names of control registers (ctrl_names);
279 (seg_length): provides instruction length fixup for segmented
280 mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
281 CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
282 (unparse_intr): handle CLASS_PR, print addresses without '#'
283 * z8k-opc.h: re-created with new z8kgen
284 * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
285 entries for ldctl/ldctlb instruction
287 2001-04-06 Andreas Jaeger <aj@suse.de>
289 * i386-dis.c: Add ffreep instruction.
291 2001-03-30 Alexandre Oliva <aoliva@redhat.com>
293 * ppc-opc.c (insert_mbe): Shift mask initializer as long.
295 2001-03-24 Alan Modra <alan@linuxcare.com.au>
297 * i386-dis.c (PREGRP25): Define.
298 (dis386_twobyte_att): Use here in place of "movntq" entry.
299 (dis386_twobyte_intel): Likewise.
300 (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
302 (dis386_twobyte_att): Use here.
303 (dis386_twobyte_intel): Likewise.
304 (prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
305 (prefix_user_table <maskmovdqu>): XM operand, not MX.
306 (prefix_user_table): Cosmetic changes to "bad" entries.
308 2001-03-23 Nick Clifton <nickc@redhat.com>
310 * mips-opc.c: Remove extraneous whitespace.
311 * mips-dis.c: Remove extraneous whitespace.
313 2001-03-22 Ben Elliston <bje@redhat.com>
315 * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
316 declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
317 * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
318 to allay a compiler warning.
320 2001-03-22 Alan Modra <alan@linuxcare.com.au>
322 * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
323 (dis386_twobyte_intel): Likewise.
324 (twobyte_has_modrm): Set entry for paddq, psubq.
326 2001-03-20 Patrick Macdonald <patrickm@redhat.com>
328 * cgen-dis.in (print_insn_@arch@): Add support for target machine
329 determination via CGEN_COMPUTE_MACH.
330 * fr30-desc.c: Regenerate.
331 * fr30-dis.c: Regenerate.
332 * fr30-opc.h: Regenerate.
333 * m32r-desc.c: Regenerate.
334 * m32r-dis.c: Regenerate.
335 * m32r-opc.h: Regenerate.
336 * m32r-opinst.c: Regenerate.
338 2001-03-20 H.J. Lu <hjl@gnu.org>
340 * configure.in: Remove the redundent AC_ARG_PROGRAM.
341 * configure: Rebuild.
343 2001-03-19 Jim Wilson <wilson@redhat.com>
345 * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
346 notestr if larger than xsect.
347 (in_class): Handle format M5.
348 * ia64-asmtab.c: Regnerate.
350 2001-03-19 John David Anglin <dave@hiauly1.hia.nrc.ca>
352 * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
353 has more than one byte left to read.
355 2001-03-16 Martin Schwidefsky <schwidefsky@de.ibm.com>
357 * s390-opc.c: Add new opcodes. Smooth out formatting.
358 * s390-opc.txt: Add new opcodes.
360 2001-03-06 Nick Clifton <nickc@redhat.com>
362 * arm-dis.c (print_insn_thumb): Compute destination address
363 of BLX(1) instruction by taking bit 1 from PC and not from bit
366 2001-03-06 Igor Shevlyakov <igor@windriver.com>
368 * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
369 so command line switches will work.
371 2001-03-05 Dave Brolley <brolley@redhat.com>
373 * fr30-asm.c: Regenerate.
374 * fr30-desc.c: Regenerate.
375 * fr30-desc.h: Regenerate.
376 * fr30-dis.c: Regenerate.
377 * fr30-ibld.c: Regenerate.
378 * fr30-opc.c: Regenerate.
379 * fr30-opc.h: Regenerate.
380 * m32r-asm.c: Regenerate.
381 * m32r-desc.c: Regenerate.
382 * m32r-desc.h: Regenerate.
383 * m32r-dis.c: Regenerate.
384 * m32r-ibld.c: Regenerate.
385 * m32r-opc.c: Regenerate.
386 * m32r-opc.h: Regenerate.
387 * m32r-opinst.c: Regenerate.
389 2001-02-28 Igor Shevlyakov <igor@windriver.com>
391 * m68k-opc.c: fix cpushl according to Motorola. Enable
392 bunch of instructions for Coldfire 5407 and add all new.
394 2001-02-27 Alan Modra <alan@linuxcare.com.au>
396 * configure.in (BFD_VERSION): Do without grep.
397 * configure: Regenerate.
398 * Makefile.am: Run "make dep-am".
399 * Makefile.in: Regenerate.
401 2001-02-23 David Mosberger <davidm@hpl.hp.com>
403 * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
404 * ia64-asmtab.c: Regenerate.
406 2001-02-21 David Mosberger <davidm@hpl.hp.com>
408 * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
409 separate variants: one for IMM22 and the other for IMM14.
410 * ia64-asmtab.c: Regenerate.
412 2001-02-21 Greg McGary <greg@mcgary.org>
414 * cgen-opc.c (cgen_get_insn_value): Add missing `return'.
416 2001-02-20 H.J. Lu <hjl@gnu.org>
418 * Makefile.am (ia64-ic.tbl): Remove the target.
419 (ia64-raw.tbl): Likewise.
420 (ia64-waw.tbl): Likewise.
421 (ia64-war.tbl): Likewise.
422 (ia64-asmtab.c): Generate it in the source directory.
423 * Makefile.in: Regenerated.
425 2001-02-18 lars brinkhoff <lars@nocrew.org>
427 * Makefile.am: Add PDP-11 target.
428 * configure.in: Likewise.
429 * disassemble.c: Likewise.
430 * pdp11-dis.c: New file.
431 * pdp11-opc.c: New file.
433 2001-02-14 Jim Wilson <wilson@redhat.com>
435 * ia64-ic.tbl: Update from Intel. Add setf to fr-writers.
436 * ia64-asmtab.c: Regenerate.
438 Mon Feb 12 17:41:26 CET 2001 Jan Hubicka <jh@suse.cz>
440 * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
444 2001-02-11 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
446 * mips-dis.c (print_insn_arg): Use top four bits of the address of
447 the following instruction not of the jump itself for the jump
449 (print_mips16_insn_arg): Likewise.
451 2001-02-11 Michael Sokolov <msokolov@ivan.Harhan.ORG>
453 * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
455 * Makefile.in: Regenerate.
457 2001-02-09 Schwidefsky <schwidefsky@de.ibm.com>
459 * Makefile.am: Add linux target for S/390.
460 * Makefile.in: Likewise.
461 * configure.in: Likewise.
462 * disassemble.c: Likewise.
463 * s390-dis.c: New file.
464 * s390-mkopc.c: New file.
465 * s390-opc.c: New file.
466 * s390-opc.txt: New file.
468 2001-02-05 Jim Wilson <wilson@redhat.com>
470 * ia64-asmtab.c: Revert 2000-12-16 change.
472 2001-02-02 Patrick Macdonald <patrickm@redhat.com>
474 * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
475 * m32r-desc.h: Regenerate.
477 Thu Feb 1 16:29:06 MET 2001 Jan Hubicka <jh@suse.cz>
479 * i386-dis.c (dis386_att, grps): Use 'T' for push/pop
480 (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
482 2001-01-14 Alan Modra <alan@linuxcare.com.au>
484 * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
486 2001-01-13 Nick Clifton <nickc@redhat.com>
488 * disassemble.c: Remove spurious white space.
490 Sat Jan 13 01:48:24 MET 2001 Jan Hubicka <jh@suse.cz>
492 * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
495 2001-01-11 Peter Targett <peter.targett@arccores.com>
497 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
498 * Makefile.am (C_FILES): Add arc-ext.c.
499 (ALL_MACHINES) Add arc-ext.lo.
500 (INCLUDES) Add opcode directory to list.
501 New dependency entry for arc-ext.lo.
502 * disassemble.c (disassembler): Correct call to
503 arc_get_disassembler.
504 * arc-opc.c: New update for ARC, including full base
505 instructions for ARC variants.
506 * arc-dis.h, arc-dis.c: New update for ARC, including
507 extensibility functionality.
508 * arc-ext.h, arc-ext.c: New files for handling extensibility.
510 2001-01-10 Jan Hubicka <jh@suse.cz>
512 * i386-dis.c (PREGRP15 - PREGRP24): New.
513 (dis386_twobyt): Add SSE2 instructions.
514 (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
515 (twobyte_uses_f3_prefix): ... this one.
516 (grps): Add SSE instructions.
517 (prefix_user_table): Add two new slots; add SSE2 instructions.
518 (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
519 Handle the REPNZ and Data16 prefixes as well; do proper lookup
520 to prefix_user_table.
521 (OP_E): Accept mfence and lfence as well.
522 (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
523 (OP_XMM): Support REX extensions.
527 2001-01-09 Nick Clifton <nickc@redhat.com>
529 * arm-dis.c (print_insn): Set pc to zero for instructions with
530 a reloc associated with them.
532 2001-01-09 Jeff Johnston <jjohnstn@redhat.com>
534 * cgen-asm.in (parse_insn_normal): Changed syn to be
535 CGEN_SYNTAX_CHAR_TYPE. Changed all references to *syn
536 as character to use CGEN_SYNTAX_CHAR macro and all comparisons
537 to '\0' to use 0 instead.
538 * cgen-dis.in (print_insn_normal): Ditto.
539 * cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
541 2001-01-05 Jan Hubicka <jh@suse.cz>
543 * i386-dis.c: Add x86_64 support.
544 (rex): New static variable.
545 (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
546 (USED_REX): New macro.
547 (Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
548 (OP_I64, OP_OFF64, OP_IMREG): New functions.
549 (OP_REG, OP_OFF): Declare.
550 (get64, get32, get32s): New functions.
551 (r??_reg): New constants.
552 (dis386_att): Change templates of instruction implicitly promoted
553 to 64bit; change e?? to RMe?? for unwind RM byte instructions.
555 (dis386_intel): Likewise.
556 (dixx86_64_att): New table based on dis386_att.
557 (dixx86_64_intel): New table based on dis386_intel.
558 (names64, names8rex): New global variable.
559 (names32, names16): Add extended registers.
560 (prefix_user_t): Recognize rex prefixes.
561 (prefix_name): Print REX prefixes nicely.
562 (op_riprel): New global variable.
563 (start_pc): Set type to bfd_vma.
564 (print_insn_i386): Detect the 64bit mode and use proper table;
565 move ckprefix after initializing the buffer; output unused rex prefixes;
566 output information about target of RIP relative addresses.
567 (putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
568 (print_operand_value): New function.
569 (OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
570 REX prefix and new modes.
571 (get64, get32s): New.
572 (get32): Return bfd_signed_vma type.
573 (set_op): Initialize the op_riprel.
574 * disassemble.c (disassembler): Recognize the x86-64 disassembly.
576 2001-01-03 Richard Sandiford <r.sandiford@redhat.com>
578 cgen-dis.in (read_insn): Use bfd_get_bits()
580 2001-01-02 Richard Sandiford <rsandifo@redhat.com>
582 * cgen-dis.c (hash_insn_array): Use bfd_put_bits().
583 (hash_insn_list): Likewise
584 * cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
585 (extract_1): Use bfd_get_bits().
586 (extract_normal): Apply sign extension to both extraction
588 * cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
589 (cgen_put_insn_value): Use bfd_put_bits()
591 2000-12-28 Frank Ch. Eigler <fche@redhat.com>
593 * cgen-asm.in (parse_insn_normal): Print better error message for
594 instructions with missing operands.
596 2000-12-21 Santeri Paavolainen <santtu@ssh.com>
598 * cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.
600 2000-12-16 Nick Clifton <nickc@redhat.com>
602 * Makefile.in: Regenerate.
603 * aclocal.m4: Regenerate.
604 * config.in: Regenerate.
605 * configure.in: Add spacing.
606 * configure: Regenerate.
607 * ia64-asmtab.c: Regenerate.
608 * po/opcodes.pot: Regenerate.
610 2000-12-12 Frank Ch. Eigler <fche@redhat.com>
612 * cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
613 error messages over later parse-time ones.
615 2000-12-12 Jim Wilson <wilson@redhat.com>
617 * ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
619 * ia64-gen.c (insert_deplist): Cast sizeof result to int.
620 (print_dependency_table): Print NULL if semantics field not set.
621 (insert_opcode_dependencies): Mark cmp parameter as unused.
622 (print_main_table): Use fprintf_vma to print long long fields.
623 (main): Mark argv paramter as unused. Convert to old style definition.
624 * ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
625 * ia64-asmtab.c: Regnerate.
627 2000-12-09 Nick Clifton <nickc@redhat.com>
629 * m32r-dis.c (print_insn): Prevent re-read of instruction from
632 * fr30-dis.c: Regenerate.
634 2000-12-08 Peter Targett <peter.targett@arccores.com>
636 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
637 * Makefile.am (C_FILES): Add arc-ext.c.
638 (ALL_MACHINES) Add arc-ext.lo.
639 (INCLUDES) Add opcode directory to list.
640 New dependency entry for arc-ext.lo.
641 * disassemble.c (disassembler): Correct call to
642 arc_get_disassembler.
643 * arc-opc.c: New update for ARC, including full base
644 instructions for ARC variants.
645 * arc-dis.h, arc-dis.c: New update for ARC, including
646 extensibility functionality.
647 * arc-ext.h, arc-ext.c: New files for handling extensibility.
649 2000-12-03 Chris Demetriou cgd@sibyte.com
651 * mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
652 MOD_HILO, and MOD_LO macros.
654 * mips-opc.c (M1, M2): Delete.
655 (mips_builtin_opcodes): Remove all uses of M1.
657 * mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
658 instructions take "G" format second operands and use the
660 There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
662 Delete "sel" code operands from mfc1 and mtc1.
663 Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
666 2000-12-03 Ed Satterthwaite ehs@sibyte.com and
667 Chris Demetriou cgd@sibyte.com
669 * mips-opc.c (mips_builtin_opcodes): Finish additions
670 for MIPS32 support, and clean up existing entries for
671 aesthetics, consistency with the MIPS32 ISA, and
672 with consistency the rest of the table.
674 2000-12-01 Nick Clifton <nickc@redhat.com>
676 * mips16-opc.c (mips16_opcodes): Add initialiser for membership
679 2000-12-01 Chris Demetriou <cgd@sibyte.com>
681 mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
682 specifiers. Update 'B' for new constant names, and remove
684 mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
685 near the top of the array, so they are disassembled properly.
686 Enable "ssnop" for MIPS32. Add "break" variant with 20 bit
687 code for MIPS32. Update "clo" and "clz" to use 'U' operand
688 specifier. Add 'H' format specifier variants for "mfc1,"
689 "mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32. Update
690 MIPS32 "sdbbp" to use 'B' operand specifier. Add MIPS32
691 "wait" variant which uses 'J' operand specifier.
693 * mips-dis.c (set_mips_isa_type): Update to use
694 CPU_UNKNOWN and ISA_* constants. Add bfd_mach_mips32 case.
695 Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
696 * mips-opc.c (I32): New constant for instructions added in
699 (mips_builtin_opcodes) Replace all uses of P4 with I32.
701 * mips-dis.c (set_mips_isa_type): Add cases for
702 bfd_mach_mips5 and bfd_mach_mips64.
703 * mips-opc.c (I64): New definitions.
705 * mips-dis.c (set_mips_isa_type): Add case for
708 2000-11-28 Hans-Peter Nilsson <hp@bitrange.com>
710 * sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
711 (print_insn_ppi): Make nib1, nib2, nib3 unsigned.
712 Initialize variable dc to NULL.
713 (print_insn_shx): Remove unused label d_reg_n.
715 2000-11-24 Nick Clifton <nickc@redhat.com>
717 * arm-opc.h: Add new opcode formatting parameter 'B'.
718 (arm_opcodes): Add XScale, v5, and v5te instructions.
719 (thumb_opcodes): Add v5t instructions.
721 * arm-dis.c (print_insn_arm): Handle new 'B' format
723 (print_insn_thumb): Decode BLX(1) instruction.
725 2000-11-21 Chris Demetriou <cgd@sibyte.com>
727 * mips-opc.c: Fix file header comment.
729 2000-11-14 Hans-Peter Nilsson <hp@axis.com>
731 * cris-dis.c (cris_get_disassembler): If abfd is NULL, return
732 print_insn_cris_with_register_prefix.
734 2000-11-11 Alexandre Oliva <aoliva@redhat.com>
736 * sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.
738 2000-11-07 Matthew Green <mrg@redhat.com>
740 * cgen-dis.in (print_insn): All insns which can fit into insn_value
741 must be loaded there in their entirety.
743 2000-10-20 Jakub Jelinek <jakub@redhat.com>
745 * sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
746 (compute_arch_mask): Add v8plusb and v9b machines.
747 (print_insn_sparc): siam mode decoding, accept ASRs up to 25.
748 * sparc-opc.c: Support for Cheetah instruction set.
749 (prefetch_table): Add #invalidate.
751 2000-10-16 Nick Clifton <nickc@redhat.com>
753 * mcore-dis.c (imsk): Change mask for OC to 0xFE00.
755 2000-10-06 Dave Brolley <brolley@redhat.com>
757 * fr30-desc.h: Regenerate.
758 * m32r-desc.h: Regenerate.
759 * m32r-ibld.c: Regenerate.
761 2000-10-05 Jim Wilson <wilson@redhat.com>
763 * ia64-ic.tbl: Update from Intel.
764 * ia64-asmtab.c: Regenerate.
766 2000-10-04 Kazu Hirata <kazu@hxi.com>
768 * ia64-gen.c: Convert C++-style comments to C-style comments.
769 * tic54x-dis.c: Likewise.
771 2000-09-29 Hans-Peter Nilsson <hp@axis.com>
773 Changes to add dollar prefix to registers for files where user symbols
774 don't have a leading underscore. Fix formatting.
775 * cris-dis.c (REGISTER_PREFIX_CHAR): New.
776 (format_reg): Add parameter with_reg_prefix. All callers changed.
777 (print_with_operands): Ditto.
778 (print_insn_cris_generic): Renamed from print_insn_cris, add
779 parameter with_reg_prefix.
780 (print_insn_cris_with_register_prefix,
781 print_insn_cris_without_register_prefix, cris_get_disassembler):
783 * disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
785 2000-09-22 Jim Wilson <wilson@redhat.com>
787 * ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
788 gt, ge, ngt, and nge.
789 * ia64-asmtab.c: Regenerate.
791 * ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
792 * ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
793 (lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
794 * ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
795 * ia64-asmtab.c: Regnerate.
797 2000-09-13 Anders Norlander <anorland@acc.umu.se>
799 * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
800 Add mfc0 and mtc0 with sub-selection values.
801 Add clo and clz opcodes.
802 Add msub and msubu instructions for MIPS32.
803 Add madd/maddu aliases for mad/madu for MIPS32.
804 Support wait, deret, eret, movn, pref for MIPS32.
805 Support tlbp, tlbr, tlbwi, tlbwr.
808 * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
809 (print_insn_arg): Handle 'H' args.
810 (set_mips_isa_type): Recognize 4K.
811 Use CPU_* defines instead of hardcoded numbers.
813 2000-09-11 Catherine Moore <clm@redhat.com>
815 * d30v-opc.c (d30v_operand_t): New operand type Rb2.
816 (d30v_format_tab): Use Rb2 for modinc and moddec.
818 2000-09-07 Catherine Moore <clm@redhat.com>
820 * d30v-opc.c (d30v_format_tab): Use format Ra for
823 2000-09-06 Alexandre Oliva <aoliva@redhat.com>
825 * configure: Rebuilt with new libtool.m4.
827 2000-09-05 Nick Clifton <nickc@redhat.com>
829 * configure: Regenerate.
830 * po/opcodes.pot: Regenerate.
832 2000-08-31 Alexandre Oliva <aoliva@redhat.com>
834 * acinclude.m4: Include libtool and gettext macros from the
836 * aclocal.m4, configure: Rebuilt.
838 2000-08-30 Kazu Hirata <kazu@hxi.com>
840 * tic80-dis.c: Fix formatting.
842 2000-08-29 Kazu Hirata <kazu@hxi.com>
844 * w65-dis.c: Fix formatting.
846 2000-08-28 Mark Hatle <mhatle@mvista.com>
848 * ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
849 (powerpc_opcodes): Add table entries for PPC 405 instructions.
850 Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
851 instructions. Added extended mnemonic mftbl as defined in the
852 405GP manual for all PPCs.
854 2000-08-28 Jim Wilson <wilson@redhat.com>
856 * ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
857 call. Change last goto to use failed instead of done.
859 2000-08-28 Dave Brolley <brolley@redhat.com>
861 * cgen-ibld.in (cgen_put_insn_int_value): New function.
862 (insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
863 (insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
864 (extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
865 * cgen-dis.in (read_insn): New static function.
866 (print_insn): Use read_insn to read the insn into the buffer and set
868 (print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
870 * fr30-asm.c: Regenerated.
871 * fr30-desc.c: Regenerated.
872 * fr30-desc.h: Regenerated.
873 * fr30-dis.c: Regenerated.
874 * fr30-ibld.c: Regenerated.
875 * fr30-opc.c: Regenerated.
876 * fr30-opc.h: Regenerated.
877 * m32r-asm.c: Regenerated.
878 * m32r-desc.c: Regenerated.
879 * m32r-desc.h: Regenerated.
880 * m32r-dis.c: Regenerated.
881 * m32r-ibld.c: Regenerated.
882 * m32r-opc.c: Regenerated.
884 2000-08-28 Kazu Hirata <kazu@hxi.com>
886 * tic30-dis.c: Fix formatting.
888 2000-08-27 Kazu Hirata <kazu@hxi.com>
890 * sh-dis.c: Fix formatting.
892 2000-08-24 David Edelsohn <dje@watson.ibm.com>
894 * ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.
896 2000-08-24 Kazu Hirata <kazu@hxi.com>
898 * z8k-dis.c: Fix formatting.
900 2000-08-16 Jim Wilson <wilson@redhat.com>
902 * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds. Delete
903 break, mov-immediate, nop.
904 * ia64-opc-f.c: Delete fpsub instructions.
905 * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
906 address operand. Rewrite using macros to avoid long lines.
907 * ia64-opc.h (POSTINC): Define.
908 * ia64-asmtab.c: Regenerate.
910 2000-08-15 Jim Wilson <wilson@redhat.com>
912 * ia64-ic.tbl: Add missing entries.
914 2000-08-08 Jason Eckhardt <jle@redhat.com>
916 * i860-dis.c (print_br_address): Change third argument from int
919 2000-08-07 Richard Henderson <rth@redhat.com>
921 * ia64-dis.c (print_insn_ia64): Get byte skip count correct
922 for MLI templates. Handle IA64_OPND_TGT64.
924 2000-08-04 Ben Elliston <bje@redhat.com>
926 * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
929 2000-08-02 Jim Wilson <wilson@redhat.com>
931 * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
933 2000-07-29 Marek Michalkiewicz <marekm@linux.org.pl>
935 * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
936 Change return type from void to int. Check the combination
937 of operands, return 1 if valid. Fix to avoid BUF overflow.
938 Report undefined combinations of operands in COMMENT.
939 Report internal errors to stderr. Output the adiw/sbiw
940 constant operand in both decimal and hex.
941 (print_insn_avr): Disassemble ldd/std with displacement of 0
942 as ld/st. Check avr_operand () return value, handle invalid
943 combinations of operands like unknown opcodes.
945 2000-07-28 Ben Elliston <bje@redhat.com>
947 * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
948 (run-cgen, stamp-m32r, stamp-fr30): New targets.
949 * Makefile.in: Regenerate.
950 * configure.in: Add --enable-cgen-maint option.
951 * configure: Regenerate.
953 2000-07-26 Dave Brolley <brolley@redhat.com>
955 * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
956 (cgen_hw_lookup_by_num): Ditto.
957 (cgen_operand_lookup_by_name): Ditto.
958 (print_address): Ditto.
959 (print_keyword): Ditto.
960 * cgen-dis.c (hash_insn_array): Mark unused parameters with
962 * cgen-asm.c (hash_insn_array): Mark unused parameters with
964 (cgen_parse_keyword): Ditto.
966 2000-07-22 Jason Eckhardt <jle@redhat.com>
968 * i860-dis.c: New file.
969 (print_insn_i860): New function.
970 (print_br_address): New function.
971 (sign_extend): New function.
972 (BITWISE_OP): New macro.
973 (I860_REG_PREFIX): New macro.
974 (grnames, frnames, crnames): New structures.
976 * disassemble.c (ARCH_i860): Define.
977 (disassembler): Add check for bfd_arch_i860 to set disassemble
978 function to print_insn_i860.
980 * Makefile.in (CFILES): Added i860-dis.c.
981 (ALL_MACHINES): Added i860-dis.lo.
982 (i860-dis.lo): New dependences.
984 * configure.in: New bits for bfd_i860_arch.
986 * configure: Regenerated.
988 2000-07-20 Hans-Peter Nilsson <hp@axis.com>
990 * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
991 (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
992 (cris-dis.lo, cris-opc.lo): New rules.
993 * Makefile.in: Rebuild.
994 * configure.in (bfd_cris_arch): New target.
995 * configure: Rebuild.
996 * disassemble.c (ARCH_cris): Define.
997 (disassembler): Support ARCH_cris.
998 * cris-dis.c, cris-opc.c: New files.
999 * po/POTFILES.in, po/opcodes.pot: Regenerate.
1001 2000-07-11 Jakub Jelinek <jakub@redhat.com>
1003 * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
1004 Reported by Bill Clarke <llib@computer.org>.
1006 2000-07-09 Geoffrey Keating <geoffk@redhat.com>
1008 * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
1009 Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
1011 2000-07-09 Alan Modra <alan@linuxcare.com.au>
1013 * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
1014 fput_const, extract_3, extract_5_load, extract_5_store,
1015 extract_5r_store, extract_5R_store, extract_10U_store,
1016 extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
1017 extract_12, extract_17, extract_22): Prototype.
1018 (print_insn_hppa): Rename inner block opcode -> opc to avoid
1019 shadowing outer block.
1022 2000-07-05 DJ Delorie <dj@redhat.com>
1026 2000-07-04 Alexandre Oliva <aoliva@redhat.com>
1028 * arm-dis.c (print_insn_arm): Output combinations of PSR flags.
1030 2000-07-03 Marek Michalkiewicz <marekm@linux.org.pl>
1032 * avr-dis.c (avr_operand): Change _ () to _() around all strings
1033 marked for translation (exception from the usual coding style).
1034 (print_insn_avr): Initialize insn2 to avoid warnings.
1036 2000-07-03 Kazu Hirata <kazu@hxi.com>
1038 * h8300-dis.c (bfd_h8_disassemble): Improve readability.
1039 * h8500-dis.c: Fix formatting.
1041 2000-07-01 Alan Modra <alan@linuxcare.com.au>
1043 * Makefile.am (DEP): Fix 2000-06-22. grep after running dep.sed
1044 (CLEANFILES): Add DEPA.
1045 * Makefile.in: Regenerate.
1047 2000-06-26 Scott Bambrough <scottb@netwinder.org>
1049 * arm-dis.c (regnames): Add an additional register set to match
1050 the set used by GCC. Make it the default.
1052 2000-06-22 Alan Modra <alan@linuxcare.com.au>
1054 * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
1056 * Makefile.in: Regenerate.
1058 2000-06-20 H.J. Lu <hjl@gnu.org>
1060 * Makefile.am: Rebuild dependency.
1061 * Makefile.in: Rebuild.
1063 2000-06-18 Stephane Carrez <stcarrez@worldnet.fr>
1065 * Makefile.in, configure: regenerate
1066 * disassemble.c (disassembler): Recognize ARCH_m68hc12,
1068 * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
1070 * configure.in: Recognize m68hc12 and m68hc11.
1071 * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
1072 * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
1073 and opcode generation for m68hc11 and m68hc12.
1075 2000-06-16 Nick Duffek <nsd@redhat.com>
1077 * disassemble.c (disassembler): Refer to the PowerPC 620 using
1078 bfd_mach_ppc_620 instead of 620.
1080 2000-06-12 Kazu Hirata <kazu@hxi.com>
1082 * h8300-dis.c: Fix formatting.
1083 (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
1086 2000-06-09 Denis Chertykov <denisc@overta.ru>
1088 * avr-dis.c (avr_operand): Bugfix for jmp/call address.
1090 2000-06-07 Denis Chertykov <denisc@overta.ru>
1092 * avr-dis.c: completely rewritten.
1094 2000-06-02 Kazu Hirata <kazu@hxi.com>
1096 * h8300-dis.c: Follow the GNU coding style.
1097 (bfd_h8_disassemble) Fix a typo.
1099 2000-06-01 Kazu Hirata <kazu@hxi.com>
1101 * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
1102 (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
1103 correctly. Fix a typo.
1105 2000-05-31 Nick Clifton <nickc@redhat.com>
1107 * opintl.h (_(String)): Explain why dgettext is used instead of
1110 2000-05-30 Nick Clifton <nickc@redhat.com>
1112 * opintl.h (gettext, dgettext, dcgettext, textdomain,
1113 bindtextdomain): Replace defines with those from intl/libgettext.h
1114 to quieten gcc warnings.
1116 2000-05-26 Alan Modra <alan@linuxcare.com.au>
1118 * Makefile.am: Update dependencies with "make dep-am"
1119 * Makefile.in: Regenerate.
1121 2000-05-25 Alexandre Oliva <aoliva@redhat.com>
1123 * m10300-dis.c (disassemble): Don't assume 32-bit longs when
1124 sign-extending operands.
1126 2000-05-15 Donald Lindsay <dlindsay@redhat.com>
1128 * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
1131 2000-05-21 Nick Clifton <nickc@redhat.com>
1133 * Makefile.am (LIBIBERTY): Define.
1135 2000-05-19 Diego Novillo <dnovillo@redhat.com>
1137 * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
1138 (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
1139 (reg_names): Rename to std_reg_names. Change it to a char **
1141 (std_reg_names): New name for reg_names.
1142 (set_mips_isa_type): Set reg_names to point to std_reg_names by
1145 2000-05-16 Frank Ch. Eigler <fche@redhat.com>
1147 * fr30-desc.h: Partially regenerated to account for changed
1148 CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
1149 * m32r-desc.h: Ditto.
1151 2000-05-15 Nick Clifton <nickc@redhat.com>
1153 * arm-opc.h: Use upper case for flasg in MSR and MRS
1154 instructions. Allow any bit to be set in the field_mask of
1155 the MSR instruction.
1157 * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
1158 field_mask of an MSR instruction.
1160 2000-05-11 Thomas de Lellis <tdel@windriver.com>
1162 * arm-opc.h: Disassembly of thumb ldsb/ldsh
1163 instructions changed to ldrsb/ldrsh.
1165 2000-05-11 Ulf Carlsson <ulfc@engr.sgi.com>
1167 * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
1168 target addresses for 'jal' and 'j'.
1170 2000-05-10 Geoff Keating <geoffk@redhat.com>
1172 * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
1173 also available in common mode when powerpc syntax is being used.
1175 2000-05-08 Alan Modra <alan@linuxcare.com.au>
1177 * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
1178 (dummy_print_address): Ditto.
1180 2000-05-04 Timothy Wall <twall@redhat.com>
1182 * tic54x-opc.c: New.
1183 * tic54x-dis.c: New.
1184 * disassemble.c (disassembler): Add ARCH_tic54x.
1185 * configure.in: Added tic54x target.
1187 * Makefile.am: Add tic54x dependencies.
1188 * Makefile.in: Ditto.
1190 2000-05-03 J.T. Conklin <jtc@redback.com>
1192 * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
1193 vector unit operands.
1194 (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
1195 unit instruction formats.
1196 (PPCVEC): New macro, mask for vector instructions.
1197 (powerpc_operands): Add table entries for above operand types.
1198 (powerpc_opcodes): Add table entries for vector instructions.
1200 * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
1201 (print_insn_little_powerpc): Likewise.
1202 (print_insn_powerpc): Prepend 'v' when printing vector registers.
1204 2000-04-24 Clinton Popetz <cpopetz@redhat.com>
1206 * configure.in: Add bfd_powerpc_64_arch.
1207 * disassemble.c (disassembler): Use print_insn_big_powerpc for
1210 2000-04-24 Nick Clifton <nickc@redhat.com>
1212 * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
1215 2000-04-23 Denis Chertykov <denisc@overta.ru>
1217 * avr-dis.c (reg_fmul_d): New. Extract destination register from
1219 (reg_fmul_r): New. Extract source register from FMUL instruction.
1220 (reg_muls_d): New. Extract destination register from MULS instruction.
1221 (reg_muls_r): New. Extract source register from MULS instruction.
1222 (reg_movw_d): New. Extract destination register from MOVW instruction.
1223 (reg_movw_r): New. Extract source register from MOVW instruction.
1224 (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
1225 EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
1227 2000-04-22 Timothy Wall <twall@redhat.com>
1229 * ia64-gen.c (general): Add an ordered table of primary
1230 opcode names, as well as priority fields to disassembly data
1231 structures to enforce a preferred disassembly format based on the
1232 ordering of the opcode tables.
1233 (load_insn_classes): Show a useful message if IC tables are missing.
1234 (load_depfile): Ditto.
1235 * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
1236 distinguish preferred disassembly.
1237 * ia64-opc-f.c: Reorder some insn for preferred disassembly
1238 format. Fix incorrect flag on fma.s/fma.s.s0.
1239 * ia64-opc.c: Scan *all* disassembly matches and use the one with
1240 the highest priority.
1241 * ia64-opc-b.c: Use more abbreviations.
1242 * ia64-asmtab.c: Regenerate.
1244 2000-04-21 Jason Eckhardt <jle@redhat.com>
1246 * hppa-dis.c (extract_16): New function.
1247 (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
1248 new operand types l,y,&,fe,fE,fx.
1250 2000-04-21 Richard Henderson <rth@redhat.com>
1251 David Mosberger <davidm@hpl.hp.com>
1252 Timothy Wall <twall@redhat.com>
1253 Bob Manson <manson@charmed.cygnus.com>
1254 Jim Wilson <wilson@redhat.com>
1256 * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
1257 (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
1258 ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
1260 (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
1261 (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
1262 ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
1263 * Makefile.in: Rebuild.
1264 * configure Rebuild.
1265 * configure.in (bfd_ia64_arch): New target.
1266 * disassemble.c (ARCH_ia64): Define.
1267 (disassembler): Support ARCH_ia64.
1268 * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
1269 ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
1270 ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
1271 ia64-war.tbl, ia64-waw.tbl: New files.
1273 2000-04-20 Alexandre Oliva <aoliva@redhat.com>
1275 * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
1276 (disassemble): Use them.
1278 2000-04-14 Alan Modra <alan@linuxcare.com.au>
1280 * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
1281 * Makefile.am: Update dependencies.
1282 * Makefile.in: Regenerate.
1284 2000-04-14 Michael Sokolov <msokolov@ivan.Harhan.ORG>
1286 * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
1287 avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
1288 disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
1289 i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
1290 m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
1291 mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
1292 ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
1293 tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
1294 w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h. Remove
1295 ansidecl.h as sysdep.h includes it.
1297 2000-04-7 Andrew Cagney <cagney@b1.redhat.com>
1299 * configure.in (WARN_CFLAGS): Set to -W -Wall by default. Add
1300 --enable-build-warnings option.
1301 * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
1302 * Makefile.in, configure: Re-generate.
1304 2000-04-05 J"orn Rennecke <amylaar@redhat.com>
1306 * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
1307 stc GBR,@-<REG_N> is available for arch_sh1_up.
1308 Group parallel processing insn with identical mnemonics together.
1309 Make three-operand psha / pshl come first.
1311 2000-04-05 J"orn Rennecke <amylaar@redhat.co.uk>
1313 * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
1314 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
1315 (sh_arg_type): Add A_PC.
1316 (sh_table): Update entries using immediates. Add repeat.
1317 * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
1318 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
1320 2000-04-04 Alan Modra <alan@linuxcare.com.au>
1322 * po/opcodes.pot: Regenerate.
1324 * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
1325 (DEP): Quote when passing vars to sub-make. Add warning message
1327 (DEP1): Rewrite for "gcc -MM".
1328 (CLEANFILES): Add DEP2.
1329 Update dependencies.
1330 * Makefile.in: Regenerate.
1332 2000-04-03 Denis Chertykov <denisc@overta.ru>
1334 * avr-dis.c: Syntax cleanup.
1335 (add0fff): Print the pc relative address as a signed number.
1336 (add03f8): Likewise.
1338 2000-04-01 Ian Lance Taylor <ian@zembu.com>
1340 * disassemble.c (disassembler_usage): Don't use a prototype. Mark
1341 the parameter ATTRIBUTE_UNUSED.
1342 * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
1344 2000-04-01 Alexandre Oliva <aoliva@redhat.com>
1346 * m10300-opc.c: SP-based offsets are always unsigned.
1348 2000-03-29 Thomas de Lellis <tdel@windriver.com>
1350 * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
1351 [branch always] instead of "undefined".
1353 2000-03-27 Nick Clifton <nickc@redhat.com>
1355 * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
1356 short instructions, from end of list of long instructions.
1358 2000-03-27 Ian Lance Taylor <ian@zembu.com>
1360 * Makefile.am (CFILES): Add avr-dis.c.
1361 (ALL_MACHINES): Add avr-dis.lo.
1363 2000-03-27 Alan Modra <alan@linuxcare.com>
1365 * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
1367 (print_insn_avr): Call function via pointer in K&R compatible way.
1368 (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
1369 add0fff, add03f8): Convert to old style function declaration and
1371 (avrdis_opcode): Add prototype.
1373 2000-03-27 Denis Chertykov <denisc@overta.ru>
1375 * avr-dis.c: New file. AVR disassembler.
1376 * configure.in (bfd_avr_arch): New architecture support.
1377 * disassemble.c: Likewise.
1378 * configure: Regenerate.
1380 2000-03-06 J"oern Rennecke <amylaar@redhat.com>
1382 * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
1384 2000-03-02 J"orn Rennecke <amylaar@redhat.co.uk>
1386 * d30v-dis.c (print_insn): Remove d*i hacks. Use per-operand
1387 flag to determine if operand is pc-relative.
1389 (d30v_format_table):
1390 (REL6S3): Renamed from IMM6S3.
1391 Added flag OPERAND_PCREL.
1392 (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
1393 added flag OPERAND_PCREL.
1394 (IMM12S3U): Replaced with REL12S3.
1395 (SHORT_D2, LONG_D): Delay target is pc-relative.
1396 (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
1397 Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
1398 using the REL* operands.
1399 (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
1400 (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
1401 LONG_Db, using REL* operands.
1402 (SHORT_U, SHORT_A5S): Removed stray alternatives.
1403 (d30v_opcode_table): Use new *r formats.
1405 2000-02-28 Nick Clifton <nickc@redhat.com>
1407 * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
1408 'signed_overflow_ok_p'.
1410 2000-02-27 Eli Zaretskii <eliz@is.elta.co.il>
1412 * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
1413 name of the libtool directory.
1414 * Makefile.in: Rebuild.
1416 2000-02-24 Nick Clifton <nickc@redhat.com>
1418 * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
1419 (cgen_clear_signed_overflow_ok): New function.
1420 (cgen_signed_overflow_ok_p): New function.
1422 2000-02-23 Andrew Haley <aph@redhat.com>
1424 * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
1425 m32r-ibld.c, m32r-opc.h: Rebuild.
1427 2000-02-23 Linas Vepstas <linas@linas.org>
1429 * i370-dis.c, i370-opc.c: New.
1431 * disassemble.c (ARCH_i370): Define.
1432 (disassembler): Handle it.
1434 * Makefile.am: Add support for Linux/IBM 370.
1435 * configure.in: Likewise.
1437 * Makefile.in: Regenerate.
1438 * configure: Likewise.
1440 2000-02-22 Chandra Chavva <cchavva@redhat.com>
1442 * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
1443 ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
1446 2000-02-22 Andrew Haley <aph@redhat.com>
1448 * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
1450 * mips-opc.c (G6): New define.
1451 (mips_builtin_op): Add "move" definition for -gp32.
1453 2000-02-22 Ian Lance Taylor <ian@zembu.com>
1455 From Grant Erickson <gerickso@Brocade.COM>:
1456 * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
1458 2000-02-21 Alan Modra <alan@spri.levels.unisa.edu.au>
1460 * dis-buf.c (buffer_read_memory): Change `length' param and all int
1463 2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
1465 * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
1466 (print_insn_ppi): Likewise.
1467 (print_insn_shx): Use info->mach to select appropriate insn set.
1468 Add support for sh-dsp. Remove FD_REG_N support.
1469 * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
1470 (sh_arg_type): Likewise. Remove FD_REG_N.
1471 (sh_dsp_reg_nums): New enum.
1472 (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
1473 (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
1474 (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
1475 (arch_sh3_dsp_up): Likewise.
1476 (sh_opcode_info): New field: arch.
1477 (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
1478 D_REG_N. Fill in arch field. Add sh-dsp insns.
1480 2000-02-14 Fernando Nasser <fnasser@totem.to.redhat.com>
1482 * arm-dis.c: Change flavor name from atpcs-special to
1483 special-atpcs to prevent name conflict in gdb.
1484 (get_arm_regname_num_options, set_arm_regname_option,
1485 get_arm_regnames): New functions. API to access the several
1486 flavor of register names. Note: Used by gdb.
1487 (print_insn_thumb): Use the register name entry from the currently
1488 selected flavor for LR and PC.
1490 2000-02-10 Nick Clifton <nickc@redhat.com>
1492 * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
1494 (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
1495 "mulsh.h" instructions.
1496 * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
1498 (print_insn_mcore): Add support for little endian targets.
1499 Add support for MULSH and OPSR classes.
1501 2000-02-07 Nick Clifton <nickc@redhat.com>
1503 * arm-dis.c (parse_arm_diassembler_option): Rename again.
1504 Previous delat did not take.
1506 2000-02-03 Timothy Wall <twall@redhat.com>
1508 * dis-buf.c (buffer_read_memory): Use octets_per_byte field
1509 to adjust target address bounds checking and calculate the
1510 appropriate octet offset into data.
1512 2000-01-27 Nick Clifton <nickc@redhat.com>
1514 * arm-dis.c: (parse_disassembler_option): Rename to
1515 parse_arm_disassembler_option and allow to be exported.
1517 * disassemble.c (disassembler_usage): New function: Print out any
1518 target specific disassembler options.
1519 Call arm_disassembler_options() if the ARM architecture is being
1522 * arm-dis.c (NUM_ELEM): Define this macro if not already
1524 (arm_regname): New struct type for ARM register names.
1525 (arm_toggle_regnames): Delete.
1526 (parse_disassembler_option): Use register name structure.
1527 (print_insn): New function: Combines duplicate code found in
1528 print_insn_big_arm and print_insn_little_arm.
1529 (print_insn_big_arm): Call print_insn.
1530 (print_insn_little_arm): Call print_insn.
1531 (print_arm_disassembler_options): Display list of supported,
1532 ARM specific disassembler options.
1534 2000-01-27 Thomas de Lellis <tdel@windriver.com>
1536 * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
1537 ARM_STT_16BIT flag as Thumb code symbols.
1539 * arm-dis.c (printf_insn_little_arm): Ditto.
1541 2000-01-25 Thomas de Lellis <tdel@windriver.com>
1543 * arm-dis.c (printf_insn_thumb): Prevent double dumping
1544 of raw thumb instructions.
1546 2000-01-20 Nick Clifton <nickc@redhat.com>
1548 * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
1550 2000-01-03 Nick Clifton <nickc@cygnus.com>
1552 * arm-dis.c (streq): New macro.
1553 (strneq): New macro.
1554 (force_thumb): ew local variable.
1555 (parse_disassembler_option): New function: Parse a single, ARM
1556 specific disassembler command line switch.
1557 (parse_disassembler_option): Call parse_disassembler_option to
1558 parse individual command line switches.
1559 (print_insn_big_arm): Check force_thumb.
1560 (print_insn_little_arm): Check force_thumb.
1562 For older changes see ChangeLog-9899
1568 version-control: never