2 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
4 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
5 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
6 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
7 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
8 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
9 REG_BASE_M_SI, REG_BASE_M_LI respectively.
10 (REG_SCALED, LSI_SCALED): New operand types.
11 (E): New macro for 'E' bit at bit 27.
12 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
13 opcodes, including the various size flavors (b,h,w,d) for
14 the direct load and store instructions.
16 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
18 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
20 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
21 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
22 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
23 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
24 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
25 masks with "MASK_* & ~M_*" to get the M bit reset.
26 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
28 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
30 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
31 correctly. Add support for printing TIC80_OPERAND_BITNUM and
32 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
34 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
35 CC, SICR, and LICR table entries.
36 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
37 "bcnd", and "brcr" opcodes.
40 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
42 * ppc-opc.c (powerpc_operands): Make comment match the
43 actual fields (no shift field).
44 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
46 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
47 partial implementation, work in progress.
48 * tic80-opc.c (tic80_operands): Begin construction operands table.
49 (tic80_opcodes): Continue populating opcodes table and start
50 filling in the operand indices.
51 (tic80_num_opcodes): Add this.
54 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
56 * m68k-opc.c: Add #B case for moveq.
58 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
60 * mn10300-dis.c (disassemble): Make sure all variables are initialized
64 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
66 * v850-opc.c (v850_opcodes): Put curly-braces around operands
67 for "breakpoint" instruction.
70 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
72 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
73 (dep): Use ALL_CFLAGS rather than CFLAGS.
76 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
78 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
82 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
84 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
86 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
89 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
91 * mips16-opc.c: Add "abs".
94 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
96 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
97 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
98 (disassembler): Add bfd_arch_tic80 support to set disassemble
100 * tic80-dis.c (print_insn_tic80): Add stub.
102 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
104 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
105 * configure: Regenerate with autoconf.
106 * tic80-dis.c: Add file.
107 * tic80-opc.c: Add file.
111 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
113 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
116 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
118 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
119 (mn10200_opcodes): Use it for some logicals and btst insns.
120 Add "break" and "trap" instructions.
122 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
124 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
126 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
128 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
129 relative load or add now depends upon whether the instruction is
132 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
134 * mn10200-dis.c: Finish writing disassembler.
135 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
136 Fix mask for "jmp (an)".
138 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
139 handle endianness issues for mn10300.
141 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
143 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
145 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
146 instruction. Fix opcode field for "movb (imm24),dn".
148 * mn10200-opc.c (mn10200_operands): Fix insertion position
151 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
153 * mn10200-opc.c: Create mn10200 opcode table.
154 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
155 but moving along nicely.
157 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
159 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
161 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
163 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
164 specifiers for fmovem* instructions.
166 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
168 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
170 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
172 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
175 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
177 * mn10300-opc.c: Add some comments explaining the various
180 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
182 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
184 * m68k-dis.c (print_insn_arg): Handle new < and > operand
187 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
188 operand specifiers in fmovm* instructions.
190 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
192 * ppc-opc.c (insert_li): Give an error if the offset has the two
193 least significant bits set.
195 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
197 * mips-dis.c (print_insn_mips16): Separate the instruction from
198 the arguments with a tab, not a space.
200 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
202 * mn10300-dis.c (disasemble): Finish conversion to '$' as
205 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
208 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
210 * configure: Rebuild with autoconf 2.12.
212 Add support for mips16 (16 bit MIPS implementation):
213 * mips16-opc.c: New file.
214 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
215 (mips16_reg_names): New static array.
216 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
217 after seeing a 16 bit symbol.
218 (print_insn_little_mips): Likewise.
219 (print_insn_mips16): New static function.
220 (print_mips16_insn_arg): New static function.
221 * mips-opc.c: Add jalx instruction.
222 * Makefile.in (mips16-opc.o): New target.
223 * configure.in: Use mips16-opc.o for bfd_mips_arch.
224 * configure: Rebuild.
226 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
228 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
229 operand specifiers in *save, *restore and movem* instructions.
231 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
234 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
235 register operands for immediate arithmetic, not, neg, negx, and
236 set according to condition instructions.
238 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
239 specifier of the effective-address operand in immediate forms of
240 arithmetic instructions. The specifier for the immediate operand
241 notes how and where the constant will be stored.
243 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
245 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
248 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
251 * mn10300-dis.c (disassemble): Prefix registers with '%'.
253 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
255 * mn10300-dis.c (disassemble): Handle register lists.
257 * mn10300-opc.c: Fix handling of register list operand for
258 "call", "ret", and "rets" instructions.
260 * mn10300-dis.c (disassemble): Print PC-relative and memory
261 addresses symbolically if possible.
262 * mn10300-opc.c: Distinguish between absolute memory addresses,
263 pc-relative offsets & random immediates.
265 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
267 (disassemble): Handle SPLIT and EXTENDED operands.
269 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
271 * mn10300-dis.c: Rough cut at printing some operands.
273 * mn10300-dis.c: Start working on disassembler support.
274 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
276 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
278 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
281 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
283 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
286 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
288 * mn10300-opc.c (mn10300_opcodes): Demand parens around
289 register argument is calls and jmp instructions.
291 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
293 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
294 getx operand. Fix opcode for mulqu imm,dn.
296 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
298 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
299 in MN10300_OPERAND_SPLIT operands for how many bits
300 appear in the basic insn word. Add IMM32_HIGH24,
301 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
302 (mn10300_opcodes): Use new operands as needed.
304 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
305 for bset, bclr, btst instructions.
306 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
308 * mn10300-opc.c (mn10300_operands): Remove many redundant
309 operands. Update opcode table as appropriate.
310 (IMM32): Add MN10300_OPERAND_SPLIT flag.
311 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
313 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
315 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
316 operands (for indexed load/stores). Fix bitpos for DI
317 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
318 few instructions that insert immediates/displacements in the
319 middle of the instruction. Add IMM8E for 8 bit immediate in
320 the extended part of an instruction.
321 (mn10300_operands): Use new opcodes as appropriate.
324 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
326 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
327 sequential so the assembler never parallelizes it with
331 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
333 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
334 a data/address register that appears in register field 0
335 and register field 1.
336 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
338 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
340 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
341 standard disassembly.
343 * alpha-opc.c (alpha_operands): Rearrange flags slot.
344 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
345 Recategorize PALcode instructions.
348 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
350 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
353 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
355 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
356 there are no operand types.
359 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
361 * v850-opc.c (D9_RELAX): Renamed from D9, all references
363 (v850_operands): Make sure D22 immediately follows D9_RELAX.
366 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
368 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
371 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
373 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
374 and sst.w instructions.
376 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
380 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
382 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
385 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
387 * ppc-opc.c (PPCPWR2): Define.
388 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
391 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
393 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
394 field for movhu instruction.
397 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
398 cast value to "long" not "signed long" to keep hpux10
402 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
404 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
407 * mn10300-opc.c (FMT*): Remove definitions.
409 * mn10300-opc.c (mn10300_opcodes): Fix destination register
410 for shift-by-register opcodes.
412 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
413 into [AD][MN][01] for encoding the position of the register
416 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
418 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
419 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
421 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
423 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
424 Fix various typos. Add "PAREN" operand.
426 (mn10300_opcodes): Surround all memory addresses with "PAREN"
427 operands. Fix several typos.
429 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
432 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
434 * mn10300-opc.c (FMT_XX): Renumber starting at one.
435 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
437 (mn10300_opcodes): Break opcode format out into its own field.
438 Update many operand fields to deal with signed vs unsigned
439 issues. Fix one or two typos in the "mov" instruction
440 opcode, mask and/or operand fields.
442 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
444 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
447 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
449 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
450 all opcodes. Very rough cut at operands for all opcodes.
452 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
455 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
457 * mn10200-opc.c, mn10300-opc.c: New files.
458 * mn10200-dis.c, mn10300-dis.c: New files.
459 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
460 * disassemble.c: Break mn10x00 support into 10200 and 10300
462 * configure.in: Likewise.
463 * configure: Rebuilt.
465 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
467 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
469 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
471 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
473 * disassemble (ARCH_mn10x00): Define.
474 (disassembler): Handle bfd_arch_mn10x00.
475 * configure.in: Recognize bfd_mn10x00_arch.
476 * configure: Rebuilt.
478 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
480 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
481 accordingly. Don't declare functions using op_rtn.
484 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
486 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
487 params to be more standard.
488 * (disassemble): Print absolute addresses and symbolic names for
489 branch and jump targets.
490 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
492 * (v850_opcodes): Add breakpoint insn.
495 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
497 * m68k-opc.c: Move the fmovemx data register cases before the
498 other cases, so that they get recognized before the data register
499 does gets treated as a degenerate register list.
501 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
503 * mips-opc.c: Add a case for "div" and "divu" with two registers
504 and a destination of $0.
506 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
508 * mips-dis.c (print_insn_arg): Add prototype.
509 (_print_insn_mips): Ditto.
511 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
513 * mips-dis.c (print_insn_arg): Print condition code registers as
516 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
518 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
521 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
523 * v850-dis.c (disassemble): Make static. Provide prototype.
525 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
527 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
530 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
532 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
533 ']' characters into the output stream.
534 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
535 Add "memop" field to all opcodes (for the disassembler).
536 Reorder opcodes so that "nop" comes before "mov" and "jr"
539 * v850-dis.c (print_insn_v850): Fix typo in last change.
541 * v850-dis.c (print_insn_v850): Properly handle disassembling
542 a two byte insn at the end of a memory region when the memory
543 region's size is only two byte aligned.
545 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
547 * v850-dis.c (v850_reg_names): Define.
548 (v850_sreg_names, v850_cc_names): Likewise.
549 (disassemble): Very rough cut at printing operands (unformatted).
551 * v850-opc.c (BOP_MASK): Fix.
552 (v850_opcodes): Fix mask for jarl and jr.
554 * v850-dis.c: New file. Skeleton for disassembler support.
555 * Makefile.in Remove v850 references, they're not needed here
556 and they weren't being sanitized away.
557 * configure.in: Add v850-dis.o when building v850 toolchains.
558 * configure: Rebuilt.
559 * disassemble.c (disassembler): Call v850 disassembler.
561 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
562 (insert_d8_6, extract_d8_6): New functions.
563 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
564 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
566 (IF4A, IF4B): Use "D7" instead of "D7S".
567 (IF4C, IF4D): Use "D8_7" instead of "D8".
568 (IF4E, IF4F): New. Use "D8_6".
569 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
570 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
572 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
573 (v850_operands): Change D16 to D16_15, use special insert/extract
574 routines. New new D16 that uses the generic insert/extract code.
575 (IF7A, IF7B): Use D16_15.
576 (IF7C, IF7D): New. Use D16.
577 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
579 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
580 message. Issue an error if the branch offset is odd.
582 * v850-opc.c: Add notes about needing special insert/extract
583 for all the load/store insns, except "ld.b" and "st.b".
585 * v850-opc.c (insert_d22, extract_d22): New functions.
586 (v850_operands): Use insert_d22 and extract_d22 for
588 (insert_d9): Fix range check.
590 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
592 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
593 and set bits field to D9 and D22 operands.
595 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
597 * v850-opc.c (v850_operands): Define SR2 operand.
598 (v850_opcodes): "ldsr" uses R1,SR2.
600 * v850-opc.c (v850_opcodes): Fix opcode specs for
601 sld.w, sst.b, sst.h, sst.w, and nop.
603 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
605 * v850-opc.c (v850_opcodes): Add null opcode to mark the
606 end of the opcode table.
610 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
612 * d10v-opc.c (pre_defined_registers): Added register pairs,
613 "r0-r1", "r2-r3", etc.
617 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
619 * v850-opc.c (v850_operands): Make I16 be a signed operand.
620 Create I16U for an unsigned 16bit mmediate operand.
621 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
623 * v850-opc.c (v850_operands): Define EP operand.
624 (IF4A, IF4B, IF4C, IF4D): Use EP.
626 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
627 with immediate operand, "movhi". Tweak "ldsr".
629 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
630 correct. Get sld.[bhw] and sst.[bhw] closer.
632 * v850-opc.c (v850_operands): "not" is a two byte insn
634 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
636 * v850-opc.c (v850_operands): D16 inserts at offset 16!
638 * v850-opc.c (two): Get order of words correct.
640 * v850-opc.c (v850_operands): I16 inserts at offset 16!
642 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
643 register source and destination operands.
644 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
646 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
647 same thinko in "trap" opcode.
649 * v850-opc.c (v850_opcodes): Add initializer for size field
652 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
653 Add D8 for 8-bit unsigned field in short load/store insns.
654 (IF4A, IF4D): These both need two registers.
655 (IF4C, IF4D): Define. Use 8-bit unsigned field.
656 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
657 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
658 for "ldsr" and "stsr".
659 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
662 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
663 short store word (sst.w).
665 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
667 * v850-opc.c (v850_operands): Added insert and extract fields,
668 pointers to functions that handle unusual operand encodings.
670 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
672 * v850-opc.c (v850_opcodes): Enable "trap".
674 * v850-opc.c (v850_opcodes): Fix order of displacement
675 and register for "set1", "clr1", "not1", and "tst1".
677 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
679 * v850-opc.c (v850_operands): Add "B3" support.
680 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
683 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
685 * v850-opc.c: Close unterminated comment.
687 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
689 * v850-opc.c (v850_operands): Add flags field.
690 (v850_opcodes): add move opcodes.
692 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
694 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
695 * configure: (bfd_v850v_arch) Add new case.
696 * configure.in: (bfd_v850_arch) Add new case.
697 * v850-opc.c: New file.
700 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
702 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
705 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
707 * d10v-opc.c: Add additional information to the opcode
708 table to help determinine which instructions can be done
712 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
714 * mpw-make.sed: Update editing of include pathnames to be
717 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
719 * arm-opc.h: Added "bx" instruction definition.
721 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
723 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
726 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
728 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
730 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
732 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
735 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
737 * makefile.vms: Update for alpha-opc changes.
739 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
741 * i386-dis.c (print_insn_i386): Actually return the correct value.
742 (ONE, OP_ONE): #ifdef out; not used.
745 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
747 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
748 Changed subi operand type to treat 0 as 16.
751 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
753 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
756 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
758 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
759 memory transfer instructions. Add new format string entries %h and %s.
760 * arm-dis.c: (print_insn_arm): Provide decoding of the new
764 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
766 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
767 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
770 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
772 * alpha-dis.c (print_insn_alpha_osf): Remove.
773 (print_insn_alpha_vms): Remove.
774 (print_insn_alpha): Make globally visible. Chose the register
775 names based on info->flavour.
776 * disassemble.c: Always return print_insn_alpha for the alpha.
779 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
781 * d10v-dis.c (dis_long): Handle unknown opcodes.
783 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
785 * d10v-opc.c: Changes to support signed and unsigned numbers.
786 All instructions with the same name that have long and short forms
787 now end in ".l" or ".s". Divs added.
788 * d10v-dis.c: Changes to support signed and unsigned numbers.
790 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
792 * d10v-dis.c: Change all functions to use info->print_address_func.
795 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
797 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
798 move ccr/sr insns more strict so that the disassembler only
799 selects them when the addressing mode is data register.
802 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
803 * d10v-opc.c (pre_defined_registers): Declare.
804 * d10v-dis.c (print_operand): Now uses pre_defined_registers
805 to pick a better name for the registers.
808 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
810 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
811 operands for fexpand and fpmerge. From Christian Kuehnke
812 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
814 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
816 * alpha-dis.c (print_insn_alpha): No longer the user-visible
817 print routine. Take new regnames and cpumask arguments.
818 Kill the environment variable nonsense.
819 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
820 (print_insn_alpha_vms): New function. Do VMS style regnames.
821 * disassemble.c (disassembler): Test bfd flavour to pick
822 between OSF and VMS routines. Default to OSF.
824 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
826 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
827 * configure: Rebuild.
828 * Makefile.in (install): Use @INSTALL_SHLIB@.
831 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
833 * configure: (bfd_d10v_arch) Add new case.
834 * configure.in: (bfd_d10v_arch) Add new case.
835 * d10v-dis.c: New file.
836 * d10v-opc.c: New file.
837 * disassemble.c (disassembler) Add entry for d10v.
840 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
842 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
843 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
845 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
847 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
848 distinguish between variants of the instruction set.
849 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
850 distinguish between variants of the instruction set.
852 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
854 * i386-dis.c (print_insn_i8086): New routine to disassemble using
855 the 8086 instruction set.
856 * i386-dis.c: General cleanups. Make most things static. Add
857 prototypes. Get rid of static variables aflags and dflags. Pass
858 them as args (to almost everything).
860 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
862 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
864 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
866 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
867 if the next arg is marked with SRC_IN_DST. Gross.
869 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
870 we're looking for and find EXR.
872 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
873 if we're looking for KBIT and we don't find it.
875 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
878 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
879 3bit immediate operands.
881 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
883 * Released binutils 2.7.
885 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
886 <kkaempf@progis.ac-net.de>.
888 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
890 * alpha-opc.c: Correct second case of "mov" to use OPRL.
892 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
894 * sparc-dis.c (print_insn_sparclite): New routine to print
895 sparclite instructions.
897 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
899 * m68k-opc.c (m68k_opcodes): Add coldfire support.
901 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
903 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
904 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
905 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
907 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
909 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
910 Use autoconf-set values.
911 (docdir, oldincludedir): Removed.
912 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
914 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
916 * alpha-opc.c: New file.
917 * alpha-opc.h: Remove.
918 * alpha-dis.c: Complete rewrite to use new opcode table.
919 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
920 * configure: Rebuild with autoconf 2.10.
921 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
922 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
924 (alpha-opc.o): New target.
926 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
928 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
929 Set imm_added_to_rs1 even if the source and destination register
932 * sparc-opc.c: Add some two operand forms of the wr instruction.
934 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
936 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
939 * disassemble.c (disassembler): Handle H8/S.
940 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
942 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
944 * sparc-opc.c: Add beq/teq as aliases for be/te.
946 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
947 <sergei@msil.sps.mot.com>.
949 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
951 * makefile.vms: New file.
953 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
955 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
957 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
960 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
962 * i386-dis.c (OP_OFF): Call append_prefix.
964 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
966 * ppc-opc.c (instruction encoding macros): Add explicit casts to
967 unsigned long to silence a warning from the Solaris PowerPC
970 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
972 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
974 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
976 * sparc-dis.c (X_IMM,X_SIMM): New macros.
978 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
979 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
980 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
981 cpush, cpusha, cpull sparclet insns.
983 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
985 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
987 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
989 * sparc-opc.c: Set F_FBR on floating point branch instructions.
990 Set F_FLOAT on other floating point instructions.
992 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
994 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
996 (powerpc_opcodes): Add 860/821 specific SPRs.
998 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
1000 * configure.in: Permit --enable-shared to specify a list of
1001 directories. Set and substitute BFD_PICLIST.
1002 * configure: Rebuild.
1003 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
1004 uses. Set to @BFD_PICLIST@.
1006 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
1008 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
1009 not "abs", which may be needed for the absolute in something
1010 like btst #0,@10:8. Print L_3 immediates separately from other
1011 immediates. Change ABSMOV reference to ABS8MEM.
1013 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
1015 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
1016 (current_arch_mask): New static global.
1017 (compute_arch_mask): New static function.
1018 (print_insn_sparc): Delete sparc_v9_p. New static local
1019 current_mach. Resort opcode table if current_mach changes.
1020 Generalize "insn not supported" test.
1021 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
1022 Delete test for v9/!v9.
1023 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
1025 (brfc): Split into CBR and FBR for coprocessor/fp branches.
1026 (brfcx): Renamed to FBRX.
1027 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
1028 coprocessor mnemonics are not supported on the sparclet).
1029 (condf): Renamed to CONDF.
1030 (SLCBCC2): Delete F_ALIAS flag.
1032 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
1034 * sparc-opc.c (sparc_opcodes): rd must be 0 for
1035 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
1037 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
1039 * Makefile.in (config.status): Depend upon BFD VERSION file, so
1040 that the shared library version number is set correctly.
1042 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
1044 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
1045 Miles Bader <miles@gnu.ai.mit.edu>.
1046 * configure: Rebuild.
1048 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
1050 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
1053 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
1055 * configure: Rebuild with autoconf 2.8.
1057 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
1059 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
1060 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
1062 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
1064 * configure.in: Don't set SHLIB or SHLINK to an empty string,
1065 since they appear as targets in Makefile.in.
1066 * configure: Rebuild.
1068 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
1070 * mpw-make.sed: Edit out shared library support bits.
1072 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
1074 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
1075 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
1076 (sparc_opcodes): Add sparclet insns.
1077 (sparclet_cpreg_table): New static local.
1078 (sparc_{encode,decode}_sparclet_cpreg): New functions.
1079 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
1081 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
1083 * i386-dis.c (index16): New static variable.
1084 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
1086 (OP_indirE): Return result of OP_E.
1087 (OP_E): Check for 16 bit addressing mode, and disassemble
1088 correctly. Optimised 32 bit case a little. Don't print
1089 "(base,index,scale)" when sib specifies only an offset.
1091 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
1093 * configure.in: Set and substitute SHLIB_DEP.
1094 * configure: Rebuild.
1095 * Makefile.in (SHLIB_DEP): New variable.
1096 (LIBIBERTY_LISTS, BFD_LIST): New variables.
1097 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
1098 COMMON_SHLIB, add them to piclist with appropriate modifications.
1099 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
1100 here: just use piclist.
1102 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
1104 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
1105 (print_insn_sparc): Rewrite v9/not-v9 tests.
1106 (compare_opcodes): Likewise.
1107 * sparc-opc.c (MASK_<ARCH>): Define.
1108 (v6,v7,v8,sparclite,v9,v9a): Redefine.
1109 (sparclet,v6notv9): Define.
1110 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
1111 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
1113 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
1115 * configure.in: Call AC_PROG_CC before configure.host.
1116 * configure: Rebuild.
1118 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
1120 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
1122 * i386-dis.c (onebyte_has_modrm): New static array.
1123 (twobyte_has_modrm): New static array.
1124 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
1126 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
1128 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
1131 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1133 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
1136 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
1138 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
1139 m68010up, not just m68020up | cpu32.
1141 * Makefile.in (SONAME): New variable.
1142 ($(SHLINK)): Make a link to the transformed name, as well.
1143 (stamp-tshlink): New target.
1144 (install): Skip stamp-tshlink during install.
1146 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
1148 * configure.in: Call AC_ARG_PROGRAM.
1149 * configure: Rebuild.
1150 * Makefile.in (program_transform_name): New variable.
1151 (install): Transform library name before installing it.
1153 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
1155 * i960-dis.c (mem): Add HX dcinva instruction.
1157 Support for building as a shared library, based on patches from
1158 Alan Modra <alan@spri.levels.unisa.edu.au>:
1159 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
1160 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
1161 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
1162 * configure: Rebuild.
1163 * Makefile.in (ALLLIBS): New variable.
1164 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
1165 (COMMON_SHLIB, SHLINK): New variables.
1166 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
1167 (STAGESTUFF): Remove variable.
1168 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
1169 (stamp-piclist, piclist): New targets.
1170 ($(SHLIB), $(SHLINK)): New targets.
1171 ($(OFILES)): Depend upon stamp-picdir.
1172 (disassemble.o): Build twice if PICFLAG is set.
1173 (MOSTLYCLEAN): Add pic/*.o.
1174 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
1175 (distclean): Remove pic and stamp-picdir.
1176 (install): Install shared libraries.
1177 (stamp-picdir): New target.
1179 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
1181 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
1182 Print unknown instruction as "unknown", rather than in hex.
1184 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
1186 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
1188 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
1190 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
1192 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
1194 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
1195 when necessary. From Ulrich Drepper
1196 <drepper@myware.rz.uni-karlsruhe.de>.
1198 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
1200 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
1201 sparc_num_opcodes. Update architecture enum values.
1202 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
1203 (sparc_opcode_lookup_arch): New function.
1204 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
1205 (sparc_opcodes): Add v9a shutdown insn.
1207 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
1209 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
1210 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
1212 (print_insn_sparc64): Deleted.
1213 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
1216 * sparc-opc.c (architecture_pname): Add v9a.
1218 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
1220 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
1221 incorrectly defined as 0x16 when it should be 0x15.
1222 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
1223 (alpha_insn_set): added cvtst and cvttq float ops. Also added
1224 excb (exception barrier) which is defined in the Alpha
1225 Architecture Handbook version 2.
1226 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
1227 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
1228 disassembled as or, for example.
1230 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
1232 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
1233 (_print_insn_mips): Change i from int to unsigned int.
1235 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
1237 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
1238 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
1240 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
1242 * i386-dis.c: Added Pentium Pro instructions.
1244 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1246 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
1249 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1251 * sh-opc.h (sh_nibble_type): Added REG_B.
1252 (sh_arg_type): Added A_REG_B.
1253 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
1255 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
1257 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
1259 * disassemble.c (disassembler): Use new bfd_big_endian macro.
1261 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
1263 * Makefile.in (distclean): Remove stamp-h. From Ronald
1264 F. Guilmette <rfg@monkeys.com>.
1266 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
1268 From David Mosberger-Tang <davidm@azstarnet.com>:
1269 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
1272 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1274 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
1275 (sh_table): Added many SH3 opcodes.
1276 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
1278 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1280 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
1281 (subco,subco.): Mark this PPC, not PPCCOM.
1283 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
1285 * configure: Rebuild with autoconf 2.7.
1287 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
1289 * configure: Rebuild with autoconf 2.6.
1291 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
1293 * configure.in: Sort list of architectures. Accept but do nothing
1294 for alliant, convex, pyramid, romp, and tahoe.
1296 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
1298 * a29k-dis.c (print_special): Change num to unsigned int.
1300 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
1302 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
1305 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
1307 * configure.in: Call AC_CHECK_PROG to find and cache AR.
1308 * configure: Rebuilt.
1310 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
1312 * configure.in: Add case for bfd_i860_arch.
1313 * configure: Rebuild.
1315 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
1317 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
1318 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
1319 (NEXTDOUBLE): Likewise.
1320 (print_insn_m68k): Don't match fmoveml if there is more than one
1321 register in the list.
1322 (print_insn_arg): Handle a place of '8' for a type of 'L'.
1324 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
1326 * m68k-opc.c: Use #W rather than #w.
1327 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
1329 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
1331 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
1332 and likewise for all the dbxx opcodes.
1334 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
1336 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
1338 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
1340 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
1341 the VR4100 specific instructions to the mips_opcodes structure.
1343 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
1345 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
1346 ugly Metrowerks bug in CW6, is fixed in CW7.
1348 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1350 * ppc-opc.c (whole file): Add flags for common/any support.
1352 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
1354 * Makefile.in (BISON): Remove macro.
1355 (FLAGS_TO_PASS): Remove BISON.
1357 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
1359 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1361 * m68k-dis.c (print_insn_m68k): Recognize all two-word
1362 instructions that take no args by looking at the match mask.
1363 (print_insn_arg): Always print "%" before register names.
1364 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
1365 [case '_']: Don't print "@#" before address.
1366 [case 'J']: Use "%s" as format string, not register name.
1367 [case 'B']: Treat place == 'C' like 'l' and 'L'.
1369 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
1371 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
1374 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
1376 From David Mosberger-Tang <davidm@azstarnet.com>
1378 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
1379 (alpha_insn_set): added definitions for VAX floating point
1380 instructions (Unix compilers don't generate these, but handcoded
1381 assembly might still use them).
1383 * alpha-dis.c (print_insn_alpha): added support for disassembling
1384 the miscellaneous instructions in the Alpha instruction set.
1386 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
1388 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
1389 no longer create sysdep.h, sed ppc-opc.c to work around a
1390 serious Metrowerks C bug.
1391 * mpw-make.in: Remove.
1392 * mpw-make.sed: New file, used by mpw-configure to edit
1393 Makefile.in into an MPW makefile.
1395 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
1397 * Makefile.in (maintainer-clean): New synonym for realclean.
1399 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
1401 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
1402 which use '0', '1', and '2' instead. Specify the proper size for
1403 a pmove immediate operand. Correct the pmovefd patterns to be
1404 moves to a register, not from a register.
1405 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
1407 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
1409 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
1410 %psr, %wim, %tbr as F_NOTV9.
1412 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
1414 * Makefile.in (Makefile): Just rebuild Makefile when running
1416 (config.h, stamp-h): New targets.
1417 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
1418 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
1419 rebuilding config.h.
1420 * configure: Rebuild.
1422 * mips-opc.c: Change unaligned loads and stores with "t,A"
1423 operands to use "t,A(b)".
1425 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1427 * sh-dis.c (print_insn_shx): Add F_FR0 support.
1429 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1431 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
1432 until 3 instead of until 2.
1434 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
1436 * Makefile.in (ALL_CFLAGS): Define.
1437 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
1438 (MOSTLYCLEAN): Add config.log.
1439 (distclean): Don't remove config.log.
1440 * configure.in: Substitute HDEFINES.
1441 * configure: Rebuild.
1443 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1445 * sh-opc.h (sh_arg_type): Add F_FR0.
1446 (sh_table, case fmac): Add F_FR0 as first argument.
1448 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1450 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
1452 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
1454 * sparc-dis.c: Remove all references to NO_V9.
1456 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
1458 * aclocal.m4: Just include ../bfd/aclocal.m4.
1459 * configure: Rebuild.
1461 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
1463 * sparc-dis.c (X_DISP19): Define.
1464 (print_insn, case 'G'): Use it.
1465 (print_insn, case 'L'): Sign extend displacement.
1467 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
1469 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
1470 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
1471 host_makefile_frag or frags.
1472 * aclocal.m4: New file.
1473 * configure: Rebuild.
1474 * Makefile.in (INSTALL): Set to @INSTALL@.
1475 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
1476 (INSTALL_DATA): Set to @INSTALL_DATA@.
1478 (AR_FLAGS): Set to rc rather than qc.
1479 (CC): Define as @CC@.
1480 (CFLAGS): Set to @CFLAGS@.
1481 (@host_makefile_frag@): Remove.
1482 (config.status): Remove dependency upon @frags@.
1484 * configure.in: ../bfd/config.bfd now just sets shell variables.
1485 Use them rather than looking through target Makefile fragments.
1486 * configure: Rebuild.
1488 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1490 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
1492 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
1494 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
1495 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
1498 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
1499 (lookup_{name,value}): New functions.
1500 (prefetch_table): New static local.
1501 (sparc_{encode,decode}_prefetch): New functions.
1502 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
1504 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1506 * sh-opc.h: Add blank lines to improve readabililty of sh3e
1509 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1511 * sh-dis.c: Correct comment on first line of file.
1513 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
1515 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
1517 * sparc-opc.c (asi, membar): New static locals.
1518 (sparc_{encode,decode}_{asi,membar}): New functions.
1519 (sparc_opcodes, membar insn): Fix.
1520 * sparc-dis.c (print_insn): Call sparc_decode_asi.
1521 Support decoding of membar masks.
1524 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
1526 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
1528 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
1530 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
1531 and likewise for the other branches. Add bhs as an alias for bcc,
1532 and likewise for the size variants. Add dbhs as an alias for
1535 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
1537 * sh-opc.h (FP sts instructions): Update to match reality.
1539 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
1541 * m68k-dis.c: (fpcr_names): Add % before all register names.
1542 (reg_names): Likewise.
1543 (print_insn_arg): Don't explicitly print % before register names.
1544 Add % before register names in static array names. In case 'r',
1545 print data registers as `@(Dn)', not `Dn@'. When printing a
1546 memory address, don't print @# before it.
1547 (print_indexed): Change base_disp and outer_disp from int to
1548 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
1549 syntax. Sign extend 8 byte displacement correctly.
1550 (print_base): Print using MIT syntax. Print zpc when appropriate.
1551 Change parameter disp from int to bfd_vma.
1553 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
1556 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
1558 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
1559 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
1560 * sh-opc.h (sh_arg_type): Add new operand types.
1561 (sh_table): Add new opcodes from SH3E Floating Point ISA.
1563 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1565 * Makefile.in (distclean): Remove generated file config.h.
1567 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1569 * Makefile.in (distclean): Remove generated file config.h.
1571 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
1573 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
1575 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
1577 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
1578 rather than numopcodes. Use m68k_opcodes rather than removed
1579 opcode function. Don't check F_ALIAS.
1580 (print_insn_arg): Change first parameter to be const char *.
1581 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
1582 (m68k-opc.o): New target.
1583 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
1584 * configure: Rebuild.
1586 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
1588 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
1589 (opcode_bits, opcode_hash_table): New variables.
1590 (opcodes_initialized): Renamed from opcodes_sorted.
1591 (build_hash_table): New function.
1592 (is_delayed_branch): Use hash table.
1593 (print_insn): Renamed from print_insn_sparc, made static.
1594 Build and use hash table. If !sparc64, ignore sparc64 insns,
1595 and vice-versa if sparc64.
1596 (print_insn_sparc, print_insn_sparc64): New functions.
1597 (compare_opcodes): Move sparc64 opcodes to end.
1598 Print commutative insns with constant second.
1599 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
1601 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
1603 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
1604 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
1605 avoids printing a delay slot in a delay slot.
1606 * sh-opc.h (sh_table): Fully bracket last entry.
1608 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
1610 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
1612 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
1614 * configure.in: Get host_makefile_frag from ${srcdir}.
1616 * configure.in: Autoconfiscated. Check for string[s].h. Create
1617 config.h from config.in. Don't set up sysdep.h link.
1618 * sysdep.h: New file.
1619 * configure, config.in: New files, generated from configure.in.
1620 * Makefile.in: Updated to be processed autoconf-style.
1621 (distclean): Keep sysdep.h. Remove config.log and config.cache.
1622 (Makefile): Depend on config.status.
1623 (config.status): New rule.
1624 * configure.bat: Update Makefile substitutions.
1626 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
1628 * mips-opc.c (L1): Define.
1629 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
1630 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
1633 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
1635 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
1636 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
1637 have multiple add units but only a single logical unit.
1639 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
1640 shifted by 18, without any insertion or extraction function.
1641 (insert_cr, extract_cr): Remove.
1644 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
1646 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
1649 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1651 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
1654 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
1656 * mpw-config.in: Add sh and i386 configs, remove sparc config.
1657 * sh-opc.h: Add copyright.
1659 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
1661 * Makefile.in (crunch-m68k): Delete extra target accidentally
1662 checked in a while ago.
1664 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1666 * sh-opc.h (sh_table): Add SH3 support.
1668 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
1670 * sh-opc.h: Added bsrf and braf.
1672 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
1674 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
1675 bogus [ls]fm{ea,fd} patterns.
1677 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
1678 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
1679 initialize it from memory. Make function static.
1680 (print_insn_{big,little}_arm): New functions.
1681 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
1682 the correct endianness.
1685 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
1687 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
1688 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
1691 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
1693 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
1696 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1698 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
1699 17th, so that it builds again using GCC as the compiler.
1701 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1703 * mips-dis.c (print_insn_little_mips): Cast return value from
1704 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
1705 expects an unsigned long, and that might be fewer words of
1706 argument storage (e.g., if bfd_vma is long long on a 32-bit
1708 (print_insn_big_mips): Likewise with bfd_getb32 value.
1709 (_print_insn_mips): Now static.
1711 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
1713 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
1714 gcc memory hog problem with initializer is fixed.
1717 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
1719 * arc-opc.c (NULL): Define.
1720 (arc_operands, insn fields u,s): Delete.
1721 (arc_operands, insn fields a,b,c): Mark as signed.
1722 (arc_opcodes): No longer const, links computed at run-time.
1723 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
1724 suffixes that affect the insn code.
1725 (arc_opcodes): Resort table to macros are first.
1726 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
1727 (arc_opcodes, st [b] entry): Likewise.
1728 (arc_opcodes, st [b,d] entry): Fix mask, value.
1729 (arc_reg_names): Add entries for r29, r30, r31, r60.
1730 (opcode_map, icode_map): New static globals.
1731 (arc_opcode_init_tables): Initialize them.
1732 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
1733 (insert_shimmoffset): Signal error if register present.
1735 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
1738 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
1740 Merge in support for Mac MPW as a host.
1741 (Old change descriptions retained for informational value.)
1743 * mpw-config.in (archname): Compute from the config.
1744 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
1746 * mpw-config.in (target_arch): Compute from canonical target.
1747 (m68k, mips, powerpc, sparc): Add architectures.
1748 * mpw-make.in (disassemble.c.o): Add.
1749 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
1751 * mpw-config.in (BFD_MACHINES): Set to a default value.
1752 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
1754 * mpw-make.in (CSEARCH): Add extra-include to search path.
1756 * mpw-config.in (varargs.h): Don't create.
1757 (sysdep.h): Create using forward-include.
1758 * mpw-make.in (CSEARCH): Add include/mpw to search path.
1760 * mpw-config.in: New file, MPW version of configure.in.
1761 * mpw-make.in: New file, MPW version of Makefile.in.
1764 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
1766 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
1767 Call arc_get_opcode_mach to map bfd mach number to opcode value.
1768 (print_insn_*): Pass bfd mach number, not opcode version.
1769 * arc-opc.c (arc_get_opcode_mach): New function.
1772 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1774 * alpha-dis.c (print_insn_alpha): Put empty statement after
1777 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
1779 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
1780 (low_sign_extend): Likewise.
1781 (get_field): Delete unused function.
1782 (set_field, deposit_14, deposit_21): Likewise.
1784 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1786 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
1789 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
1791 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
1793 * alpha-opc.h (OSF_ASMCODE): define
1794 print pal-code names as defined in App C of the
1795 Alpha Architecture Reference Manual
1797 * alpha-dis.c: cleaned up output
1798 print stylized code forms as defined in App A.4.3 of the
1799 Alpha Architecture Reference Manual
1801 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
1803 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
1805 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
1808 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1810 * m68k-dis.c (opcode): New function. Returns address of opcode
1811 table entry given index, even if the opcode table was split to
1812 work around gcc bugs.
1813 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
1815 (BREAK_UP_BIG_DECL): Make secondary array static and const.
1816 (reg_names): Now const.
1817 (print_insn_arg): Arrays cacheFieldName and names now const.
1818 (print_indexed): Array scales now const.
1821 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
1823 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
1824 (print_insn_arc_{host,graphics,audio}): Likewise.
1825 (print_insn): Add prototype.
1826 (arc_get_disassembler): New arg `big_p'. Return little or big
1827 print fn accordingly.
1828 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
1829 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
1830 (arc_opval_supported): Likewise.
1831 * disassemble.c (disassembler): Pass big endian flag to
1832 arc_get_disassembler.
1835 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
1837 * ppc-opc.c: Sort recently added instructions by minor opcode
1838 number within major opcode number.
1840 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
1842 * hppa-dis.c: Include libhppa.h.
1844 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
1846 * mips-opc.c: Change dli to use M_DLI, and add dla.
1848 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1850 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
1853 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
1855 * arc-dis.c (arc_get_disassembler): Change argument to int,
1856 one of bfd_mach_arc_xxx. All callers updated.
1859 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
1861 * mips-opc.c: Add r4650 mul instruction.
1863 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
1865 * mips-opc.c: Add uld and usd macros for unaligned double load and
1868 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1870 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
1871 mfdcr, mtdcr, icbt, iccci.
1874 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
1876 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
1877 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
1878 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
1879 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
1880 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
1881 (insert_absaddr): New function.
1883 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
1885 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
1886 New argument `cpu', pass it to arc_opcode_init_tables.
1887 Document byte order dependencies. Ignore unsupported insns.
1888 (arc_get_disassembler): New function.
1889 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
1890 print_insn_arc_audio): New functions.
1891 * arc-opc.c (MULTSHIFT operand): Delete.
1892 (UNSIGNED, SATURATION): New operands.
1893 (mac, mul, mul64, mulu64): New insns.
1894 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
1895 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
1896 (host,graphics,audio extended and auxiliary regs): Define.
1897 (ss, sc, mh, ml): New suffixes.
1898 (arc_opcode_supported, arc_opval_supported): New functions.
1899 (insert_multshift, extract_multshift): Deleted.
1900 * disassemble.c (disassembler, case bfd_arch_arc): Call
1901 arc_get_disassembler to get disassembler routine.
1904 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
1906 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
1907 signed char fields to shorts, more portable.
1909 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
1911 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
1912 char fields as signed chars, since they may have negative values.
1914 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1916 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
1917 (mycroft@netbsd.org).
1919 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
1921 From "Logg, Ed" <elogg@ea.com>:
1922 * ppc-opc.c (extract_bdm): Correct parenthezisation.
1923 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
1926 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
1928 * ppc-opc.c: Changes based on patch from David Edelsohn
1929 <edelsohn@mhpcc.edu>.
1930 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
1933 (insert_tbr): New static function.
1934 (extract_tbr): New static function.
1935 (XFXFXM_MASK, XFXM): Define.
1936 (XSPRBAT_MASK, XSPRG_MASK): Define.
1937 (powerpc_opcodes): Add instructions to access special registers by
1938 name. Add mtcr and mftbu.
1940 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
1942 * mips-opc.c (P3): Define.
1943 (mips_opcodes): Add mad and madu.
1945 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
1947 * configure.in: Add W65 support.
1948 * disassemble.c: Likewise.
1949 * w65-opc.h, w65-dis.c: New files.
1951 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1953 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
1957 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
1959 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
1961 * arc-opc.c (extract_reladdr): New function.
1962 (insert_reladdr): Store address right-shifted by 2.
1965 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1967 * mips-opc.c: Add dli as a synonym for li.
1970 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
1972 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
1974 (extraction fns): Insn argument now array of two words. Return pointer
1975 to value's table entry. All uses changed.
1976 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
1977 (insert_multshift, extract_multshift): New fns.
1978 (arc_operands): Add support for cache bypass suffix. Add support for
1979 predefined aux regs. Modifier bits moved to flags field.
1980 (arc_opcodes): Likewise.
1981 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
1982 New insn rlc. Update to syntax in programmer's manual.
1983 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
1984 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
1986 (arc_opcode_init_tables): New argument to indicate cpu type.
1987 (insert_reg): Handle predefined aux regs.
1988 (extract_reg): Likewise.
1989 (lookup_register): New fn.
1990 * arc-dis.c (arc_condition_codes): Deleted.
1991 (print_insn_arc): Handle insns with 32 bit immediate constants better.
1992 Clean up modifier handling. Handle predefined aux regs.
1995 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1997 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
1998 print something for reserved opcode values, even if it won't
2001 * mips-dis.c (_print_insn_mips): When initializing, shift right
2002 and mask, to avoid sign extension problems on the Alpha.
2004 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2008 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
2010 * configure.in: Add ARC support.
2011 * disassemble.c: Likewise.
2012 * arc-dis.c, arc-opc.c: New files.
2015 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2017 * sh-opc.h (mov.l gbr): Get direction right.
2018 * sh-dis.c (print_insn_shx): New function.
2019 (print_insn_shl, print_insn_sh): Call print_insn_shx to
2020 print opcodes with right byte order.
2022 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2024 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2025 to avoid conflicts with getopt.
2027 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2029 * hppa-dis.c (print_insn_hppa): Read the instruction using
2030 bfd_getb32, so that it works on a little endian or 64 bit host.
2031 Remove unused local variable op.
2033 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2035 * mips-opc.c: Use or instead of addu for pseudo-op move, since
2036 addu does not work correctly if -mips3.
2038 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2040 * a29k-dis.c (print_special): Add special register names defined
2041 on 29030, 29040 and 29050.
2042 (print_insn): Handle new operand type 'I'.
2044 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2046 * Makefile.in (INSTALL): Use top level install.sh script.
2048 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2050 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2051 that it works on a little endian host.
2053 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2055 * configure.in: Use ${config_shell} when running config.bfd.
2057 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2059 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2061 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2063 * a29k-dis.c (print_insn): Print the opcode.
2065 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2067 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2069 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
2071 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2073 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2075 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2076 which store a value into memory.
2078 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2080 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2081 * arm-dis.c, arm-opc.h: New files.
2083 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
2085 * Makefile.in (ns32k-dis.o): Add dependency.
2086 * ns32k-dis.c (print_insn_arg): Declare initialized local as
2087 string, not as array of chars.
2089 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2091 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2093 * sparc-opc.c: Added sparclite extended FP operations, and
2094 versions of v9 impdep* instructions permitting specification of
2097 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2099 * i960-dis.c (reg_names): Now const.
2100 (struct sparse_tabent): New type, copied from array type in mem
2102 (ctrl): Local static array ctrl_tab now const.
2103 (cobr): Local static array cobr_tab now const.
2104 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2105 static variable mem_tab no longer explicitly initialized. Changed
2106 mem_init to const array of struct sparse_tabent.
2107 (reg): Local static variable reg_tab no longer explicitly
2108 initialized. Changed reg_init to const array of struct
2110 (ea): Local static array scale_tab now const.
2112 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2115 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2117 * configure.bat: the disassember needs to be enabled for
2118 "objdump -d" to work in djgpp.
2120 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2122 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2123 (invalid_float): Enabled general version, doesn't require running
2124 on ns32k host. Changed to take char* argument, and test for
2125 explicitly specified sizes, instead of using sizeof() on host CPU
2127 (INVALID_FLOAT): Cast first argument.
2128 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2129 list_P032, list_M032): Now const.
2130 (optlist, list_search): Made appropriate arguments now point to
2132 (print_insn_arg): Changed static array of one-character-string
2133 pointers into a static const array of characters; fixed sprintf
2134 statement accordingly.
2136 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2138 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
2139 from distribution. A ns32k-dis.c from a previous distribution has
2140 been brought up to date and supports the new interface.
2142 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2144 * configure.in: add bfd_ns32k_arch target support.
2146 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2147 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2149 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2151 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2154 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
2156 * h8300-dis.c, mips-dis.c: Don't use true and false.
2158 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2160 * configure.in: Change --with-targets to --enable-targets.
2162 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2164 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2165 opcodes to the first instruction with that opcode, to speed
2166 disassembly of large files. From ralphc@pyramid.com (Ralph
2169 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2171 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
2173 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
2175 * configure.bat: update to latest makefile.in
2177 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
2179 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
2180 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
2181 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
2182 slot insn is in a delay slot.
2183 * z8k-opc.h: (resflg): Fix patterns.
2184 * h8500-opc.h Fix CR insn patterns.
2186 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2188 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
2189 "cmpl" before POWER versions, so that gas -many uses them.
2191 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2193 * disassemble.c: New file.
2194 * Makefile.in (OFILES): Add disassemble.o.
2195 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
2196 * configure.in: Define ARCHDEFS in Makefile. Code taken from
2197 binutils/configure.in.
2199 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
2200 opcode being examined.
2202 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2204 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
2205 (insert_ral, insert_ram, insert_ras): New functions.
2206 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
2207 RAS for store with update.
2209 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2211 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
2212 (edelsohn@npac.syr.edu).
2214 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2216 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
2219 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
2221 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
2223 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2225 * ppc-opc.c (powerpc_operands): The signedp field has been
2226 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
2227 instead. Add new operand SISIGNOPT.
2228 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
2229 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
2230 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
2233 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2235 * i386-dis.c (struct private): Renamed to dis_private. `private'
2236 is a reserved word for dynix cc.
2238 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2240 * configure.in: Change error message to refer to bfd/config.bfd
2241 rather than bfd/configure.in.
2243 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
2245 * ppc-opc.c: Define POWER2 as short alias flag.
2246 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
2249 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2251 * i960-dis.c (print_insn_i960): Don't read a second word for
2252 opcodes 0, 1, 2 and 3.
2254 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2256 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
2258 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2260 * m68881-ext.c: Removed; no longer used.
2261 * Makefile.in: Changed accordingly.
2263 * m68k-dis.c (ext_format_68881): Don't declare.
2264 (print_insn_m68k): If an instruction uses place 'i', it uses at
2265 least four fixed bytes.
2266 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
2267 extended float, convert to double using floatformat_to_double, not
2268 ieee_extended_to_double, and fetch the data before converting it.
2270 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2272 * mips-opc.c: It's sqrt.s, not sqrt.w. From
2273 davidj@ICSI.Berkeley.EDU (David Johnson).
2275 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2277 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
2278 PowerPC uses bdnz[l][a].
2280 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2282 * dis-buf.c, i386-dis.c: Include sysdep.h.
2284 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2286 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
2288 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
2289 by Motorola PowerPC 601 with PPC_OPCODE_601.
2290 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
2291 Disassemble Motorola PowerPC 601 instructions as well as normal
2292 PowerPC instructions.
2294 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
2296 * i960-dis.c (reg, mem): Just use a static array instead of
2299 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2301 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
2302 condition name index if this is for a negated condition.
2304 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
2305 Floating point format for 'H' operand is backwards from normal
2306 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
2307 operands (fmpyadd and fmpysub), handle bizarre register
2308 translation correctly for single precision format.
2310 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
2311 or 'I' operands if the next format specifier is 'M' (fcmp
2312 condition completer).
2314 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2316 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
2317 single number giving a bitmask for the MB and ME fields of an M
2318 form instruction. Change NB to accept 32, and turn it into 0;
2319 also turn 0 into 32 when disassembling. Seperated SH from NB.
2320 (insert_mbe, extract_mbe): New functions.
2321 (insert_nb, extract_nb): New functions.
2322 (SC_MASK): Mask out SA and LK bits.
2323 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
2324 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
2325 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
2326 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
2327 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
2328 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
2329 (powerpc_macros): Define table of macro definitions.
2330 (powerpc_num_macros): Define.
2332 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
2333 if PPC_OPERAND_NEXT is set.
2335 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2337 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
2338 char. Retrieve contents using bfd_getl32 instead of shifting.
2340 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2342 * ppc-opc.c: New file. Opcode table for PowerPC, including
2343 opcodes for POWER (RS/6000).
2344 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
2345 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
2346 (CFILES): Add ppc-dis.c.
2347 (ppc-dis.o, ppc-opc.o): New targets.
2348 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
2350 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2352 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
2353 No space before 'u', 'f', or 'N'.
2355 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
2357 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
2358 farther than we should.
2360 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
2362 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2364 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
2366 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2368 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
2369 needs it, to prevent reading past the end of a section.
2371 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2373 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
2374 Removed t,A case for la; always use t,A(b) case.
2376 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2378 From Ted Lemen <mellon@pepper.ncd.com>
2379 * mips-dis.c (print_insn_arg): Handle 'k'.
2380 * mips-opc.c: Make cache use k, not t.
2382 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2384 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
2385 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
2386 FLOAT_FORMAT_CODE to put out floating point register names.
2388 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2390 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
2392 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2394 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
2396 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2398 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
2399 larger than 32. Moved dsxx32 variants first for disassembler.
2401 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2403 * z8kgen.c, z8k-opc.h: Add full lda information.
2405 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
2407 * hppa-dis.c (print_insn_hppa): Do not emit a space after
2408 movb instructions. Any necessary space will be emitted by
2409 the code to handle nullification completers.
2411 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2413 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
2415 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2417 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
2418 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
2420 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2422 * mips-opc.c: Correct lwu opcode value (book had it wrong).
2424 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2426 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
2427 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
2429 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
2431 * m88k-dis.c (m88kdis): comment change. Remove space after
2433 (printop): handle new arg types DEC and XREG for m88110.
2435 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
2437 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
2438 type for absolute branch addresses. Delete special
2439 "ble" and "be" code in 'W' operand code.
2441 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2443 * mips-opc.c: Set hazard information correctly for branch
2444 likely instructions.
2446 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2448 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
2449 info->fprintf_func for printing and info->print_address_func for
2452 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2454 * mips-opc.c: Set INSN_TRAP for tXX instructions.
2456 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2458 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
2459 Corrected second case of "b" for disassembler.
2461 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2463 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
2464 to BFD swapping routines to correspond to BFD name changes.
2466 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2468 * mips-opc.c: Change div machine instruction to be z,s,t rather
2469 than s,t. Change div macro to be d,v,t rather than d,s,t.
2470 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
2471 rem and remu which generates only the corresponding div
2472 instruction. This is for compatibility with the MIPS assembler,
2473 which only generates the simple machine instruction when an
2474 explicit destination of $0 is used.
2475 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
2477 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2479 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
2480 WR_31 hazard for bal, bgezal, bltzal.
2482 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2484 * hppa-dis.c (print_insn_hppa): Use print function
2485 from within the disassemble_info, not fprintf_filtered.
2487 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2489 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
2490 Law, law@cs.utah.edu.)
2492 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2494 * mips-opc.c ("absu"): Removed.
2497 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2499 * mips-opc.c: Added r6000 and r4000 instructions and macros.
2500 Changed hazard information to distinguish between memory load
2501 delays and coprocessor load delays.
2503 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2505 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
2507 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2509 * configure.in: Don't pass cpu to config.bfd.
2511 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2513 * m88k-dis.c (m88kdis): Make class unsigned.
2515 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
2517 * alpha-dis.c (print_insn_alpha): One branch format case was
2518 missing the instruction name.
2520 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2522 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
2523 Add the arch-specific auxiliary files.
2524 (OFILES): Remove the arch-specific auxiliary files
2525 and use BFD_MACHINES instead of DIS_LIBS.
2526 * configure.in: Set BFD_MACHINES based on --with-targets option.
2528 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2530 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
2533 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2535 * sparc-opc.c: Change CONST to const to deal with gcc
2536 -Dconst=__const -traditional.
2538 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2540 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
2541 coprocessor instructions out of #if 0, and made them use new
2544 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2546 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
2548 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
2550 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
2551 instruction, for use by the disassembler.
2553 * sparc-dis.c (SEX): Add sign extension macro. Replace many
2554 hand-coded sign extensions that depended on 32-bit host ints.
2555 FIXME, we still depend on big-endian host bitfield ordering.
2556 (sparc_print_insn): Set the insn_info_valid field, and the
2557 other fields that describe the instruction being printed.
2559 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
2561 * sparc-opc.c (call): Accept all 6 addressing modes valid for
2562 `jmp' instead of just one of them.
2564 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2566 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
2567 (fput_fp_reg_r): Renamed from fput_reg_r.
2568 (fput_fp_reg): New function.
2569 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
2571 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
2573 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
2575 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2577 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
2579 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
2580 don't output a space.
2582 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
2584 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
2586 * mips-opc.c: New file, containing opcode table from
2587 ../include/opcode/mips.h.
2588 * Makefile.in: Add it.
2590 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2592 * m88k-dis.c: New file, moved in from gdb and changed to use the
2593 new dis-asm.h disassembler interface.
2594 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
2595 (m88k-dis.o): New target.
2597 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
2599 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
2600 argument string const char * to correspond to opcode/mips.h.
2602 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
2604 * mips-dis.c: Updated to account for name changes in new version
2606 * Makefile.in: Added header file dependencies.
2608 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
2610 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
2612 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2614 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
2615 extend, rather than shifts.
2617 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
2619 * Makefile.in: Undo 15 June change.
2621 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
2623 * m68k-dis.c (print_insn_arg): Change return value to byte count
2625 * m68k-dis.c: Re-write to detect invalid operands before
2626 printing anything, so we can handle this the same way we
2627 handle invalid opcodes.
2629 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2631 * sh-dis.c, sh-opc.h: Understand some more opcodes.
2633 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
2635 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
2638 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2640 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
2642 * configure.in: Do make sysdep.h link.
2643 * Makefile.in: Search ../include. Don't search ../bfd.
2645 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
2647 Changes from Jeff Law, law@cs.utah.edu:
2648 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
2649 Do not print a space before the completers specified by
2652 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
2654 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
2655 defined, since gdb has been fixed.
2657 Changes from Jeff Law, law@cs.utah.edu:
2658 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
2659 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
2660 be a *disassemble_info, not a *FILE.
2661 * hppa-dis.c: Support 'd', '!', and 'a'.
2662 * hppa-dis.c: Support 's' to extract a 2 bit space register.
2663 * hppa-dis.c: Delete cases which are no longer needed.
2665 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
2667 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
2669 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2671 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
2674 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
2676 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
2677 * configure.in: No longer need to configure to get sysdep.h.
2679 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
2681 * Patches from Jeffrey Law <law@cs.utah.edu>.
2682 * hppa-dis.c: Support 'I', 'J', and 'K' in output
2683 templates for 1.1 FP computational instructions.
2685 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2687 * h8500-dis.c (print_insn_h8500): Address argument is type
2689 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
2692 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
2693 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
2695 * sparc-dis.c (compare_opcodes): Move static declaration to
2698 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2700 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
2701 instruction, remove unimp hack from 'l' argument.
2703 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
2705 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
2708 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
2710 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
2711 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
2714 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2716 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
2717 arrays of string pointers to 2-d arrays of chars, to save
2720 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
2722 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
2723 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
2725 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2727 * hppa-dis.c: New file from Utah, adapted to new disassembler
2729 * Makefile.in: Include it.
2731 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2733 * sh-dis.c, sh-opc.h: New files.
2735 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2737 * alpha-dis.c, alpha-opc.h: New files.
2739 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2741 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
2744 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
2746 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
2748 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
2750 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
2753 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
2755 * sparc-dis.c: Use fprintf_func a few places where I forgot,
2756 and double percent signs a few places.
2758 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
2760 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
2761 Use info->print_address_func not print_address.
2763 * dis-buf.c (generic_print_address): New function.
2765 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2767 * Makefile.in: Add sparc-dis.c.
2768 sparc-dis.c: New file, merges binutils and gdb versions as follows:
2770 Add `add' instruction to the set that get checked
2771 for a preceding `sethi' in order to print an absolute address.
2772 * (print_insn): Disassembly prefers real instructions.
2773 (is_delayed_branch): Speed up.
2774 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
2775 Still missing some float ops, and needs testing.
2776 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
2777 F_ALIAS. Use printf, not fprintf, when not passing a file
2779 (compare_opcodes): Check that identical instructions have
2780 identical opcodes, complain otherwise.
2783 * Include reg_names.
2785 Use dis-asm.h/read_memory_func interface.
2787 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
2789 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
2790 deliberately return non-zero to setjmp from longjmp. Otherwise
2791 this code fails to compile.
2793 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
2795 * m68k-dis.c: Fix prototype for fetch_arg().
2797 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2799 * dis-buf.c: New file, for new read_memory_func interface.
2800 Makefile.in (OFILES): Include it.
2801 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
2802 Use new read_memory_func interface.
2804 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2806 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
2807 * h8500-opc.h: Fix couple of opcodes.
2809 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
2811 * Makefile.in: add dvi & installcheck targets
2813 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
2815 * Makefile.in: Update for h8500-dis.c.
2817 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2819 * h8500-dis.c, h8500-opc.h: New files
2821 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
2823 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
2824 ../include/dis-asm.h.
2825 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
2826 and ../gdb/m68k-pinsn.c).
2827 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
2828 and ../gdb/i386-pinsn.c).
2829 * m68881-ext.c: New file. Moved definition of
2830 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
2831 * Makefile.in: Adjust for new files.
2832 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
2833 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
2834 can be dis-assembled.
2836 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2838 * mips-dis.c (print_insn_arg): Now returns void.
2840 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
2842 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
2843 files that use the macros.
2845 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2847 * mips-dis.c: New file, from gdb/mips-pinsn.c.
2848 * Makefile.in (DIS_LIBS): Added mips-dis.o.
2849 (CFILES): Added mips-dis.c.
2851 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2853 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
2854 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
2856 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
2858 * Makefile.in: Improve *clean rules.
2859 * configure.in: Allow a default host.
2861 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2863 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
2864 files include other sysdep files
2866 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2868 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
2870 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
2872 * configure.in: For host support, use ../bfd/configure.host
2873 so it stays in sync with the ../bfd/hosts database.
2875 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2877 * configure.in: use cpu-vendor-os triple instead of nested cases
2879 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
2881 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
2882 *always* the wrong one.
2884 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2886 * z8kgen.c: added copyright info
2888 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2890 * z8k-dis.c (unparse_instr): prettier tabs
2891 * z8kgen.c -> z8k-opc.h: bug fixes in tables
2893 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
2895 * configure.in: Add ncr* configuration.
2896 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
2897 picayune ANSI compilers happy.
2899 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
2901 * configure.in (i386): Make i386 and i486 synonymous for now.
2902 * configure.in (i[34]86-*-sysv4): Add my_host definition.
2904 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2906 * Makefile.in (install): Fix typo.
2908 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
2910 * Makefile.in (make): Remove obsolete crud.
2911 (sparc-opc.o): Avoid Sun Make VPATH bug.
2913 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
2915 * Makefile.in: since there are no SUBDIRS, remove rule and
2916 references of subdir_do.
2918 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2920 * Makefile.in (install): Get the library name right here too.
2921 Don't install bfd.h, since it's unrelated to this library. No
2922 subdirs to recurse into, either.
2923 (CFILES): The source file has a .c suffix, not .o.
2925 * sparc-opc.c: New file, moved from BFD.
2926 * Makefile.in (OFILES): Build it.
2928 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
2930 * z8k-dis.c: fixed forward refferences of some declarations.
2932 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
2934 * Makefile.in: get the name of the library right
2936 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2938 * z8k-dis.c: knows how to disassemble z8k stuff
2939 * z8k-opc.h: new file full of z8000 opcodes
2943 version-control: never