opcodes/ChangeLog

   1 Sat Apr 16 23:41:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
   2
   3         * ppc-opc.c (powerpc_opcodes): Correct fcir.  From David Edelsohn
   4         (edelsohn@npac.syr.edu).
   5
   6 Wed Apr  6 17:11:45 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
   7
   8         * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
   9         immediate argument.
  10
  11 Mon Apr  4 16:30:46 1994  Doug Evans  (dje@canuck.cygnus.com)
  12
  13         * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
  14
  15 Mon Apr  4 13:22:00 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
  16
  17         * ppc-opc.c (powerpc_operands): The signedp field has been
  18         removed, so don't initialize it.  Set the PPC_OPERAND_SIGNED flag
  19         instead.  Add new operand SISIGNOPT.
  20         (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
  21         Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
  22         * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
  23         than signedp field.
  24
  25 Wed Mar 30 00:31:49 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
  26
  27         * i386-dis.c (struct private):  Renamed to dis_private. `private'
  28         is a reserved word for dynix cc.
  29
  30 Mon Mar 28 13:00:15 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
  31
  32         * configure.in: Change error message to refer to bfd/config.bfd
  33         rather than bfd/configure.in.
  34
  35 Mon Mar 28 12:28:30 1994  David Edelsohn  (edelsohn@npac.syr.edu)
  36
  37         * ppc-opc.c: Define POWER2 as short alias flag.
  38         (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
  39         fsqrt.
  40
  41 Wed Mar 23 12:23:05 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
  42
  43         * i960-dis.c (print_insn_i960): Don't read a second word for
  44         opcodes 0, 1, 2 and 3.
  45
  46 Wed Mar 16 15:37:58 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
  47
  48         * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
  49
  50 Mon Mar 14 14:53:50 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
  51
  52         * m68881-ext.c: Removed; no longer used.
  53         * Makefile.in: Changed accordingly.
  54
  55         * m68k-dis.c (ext_format_68881): Don't declare.
  56         (print_insn_m68k): If an instruction uses place 'i', it uses at
  57         least four fixed bytes.
  58         (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'.  For
  59         extended float, convert to double using floatformat_to_double, not
  60         ieee_extended_to_double, and fetch the data before converting it.
  61
  62 Tue Mar  8 18:12:25 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
  63
  64         * mips-opc.c: It's sqrt.s, not sqrt.w.  From
  65         davidj@ICSI.Berkeley.EDU (David Johnson).
  66
  67 Tue Feb  8 16:55:27 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
  68
  69         * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
  70         PowerPC uses bdnz[l][a].
  71
  72 Tue Feb  8 00:32:28 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
  73
  74         * dis-buf.c, i386-dis.c:  Include sysdep.h.
  75
  76 Mon Feb  7 19:22:23 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
  77
  78         * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
  79
  80         * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
  81         by Motorola PowerPC 601 with PPC_OPCODE_601.
  82         * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
  83         Disassemble Motorola PowerPC 601 instructions as well as normal
  84         PowerPC instructions.
  85
  86 Sun Feb  6 07:45:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
  87
  88         * i960-dis.c (reg, mem): Just use a static array instead of
  89         calling xmalloc.
  90
  91 Sat Feb  5 00:04:02 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
  92
  93         * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
  94         condition name index if this is for a negated condition.
  95
  96         * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
  97         Floating point format for 'H' operand is backwards from normal
  98         case (0 == double, 1 == single).  For '4', '6', '7', '9', and '8'
  99         operands (fmpyadd and fmpysub), handle bizarre register
 100         translation correctly for single precision format.
 101
 102         * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
 103         or 'I' operands if the next format specifier is 'M' (fcmp
 104         condition completer).
 105
 106 Feb  4 23:38:03 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 107
 108         * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
 109         single number giving a bitmask for the MB and ME fields of an M
 110         form instruction.  Change NB to accept 32, and turn it into 0;
 111         also turn 0 into 32 when disassembling.  Seperated SH from NB.
 112         (insert_mbe, extract_mbe): New functions.
 113         (insert_nb, extract_nb): New functions.
 114         (SC_MASK): Mask out SA and LK bits.
 115         (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
 116         RA, SI.  Change "liu" and "cau" to use UI rather than SI.  Mark
 117         "bctr" and "bctrl" as accepted by POWER.  Change "rlwimi",
 118         "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
 119         "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
 120         use MBE rather than MB.  Add "mfmq" and "mtmq" POWER instructions.
 121         (powerpc_macros): Define table of macro definitions.
 122         (powerpc_num_macros): Define.
 123
 124         * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
 125         if PPC_OPERAND_NEXT is set.
 126
 127 Sat Jan 22 23:10:07 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 128
 129         * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
 130         char.  Retrieve contents using bfd_getl32 instead of shifting.
 131
 132 Fri Jan 21 19:01:39 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 133
 134         * ppc-opc.c: New file.  Opcode table for PowerPC, including
 135         opcodes for POWER (RS/6000).
 136         * ppc-dis.c: New file.  PowerPC and Power (RS/6000) disassembler.
 137         * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
 138         (CFILES): Add ppc-dis.c.
 139         (ppc-dis.o, ppc-opc.o): New targets.
 140         * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
 141
 142 Mon Jan 17 20:05:49 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
 143
 144         * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
 145         No space before 'u', 'f', or 'N'.
 146
 147 Sun Jan 16 14:20:16 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
 148
 149         * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
 150         farther than we should.
 151
 152         * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
 153
 154 Thu Jan  6 12:38:05 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
 155
 156         * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
 157
 158 Wed Jan  5 11:56:21 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
 159
 160         * i960-dis.c (print_insn_i960): Only read word2 if the instruction
 161         needs it, to prevent reading past the end of a section.
 162
 163 Wed Nov 17 17:20:12 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 164
 165         * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
 166         Removed t,A case for la; always use t,A(b) case.
 167
 168 Mon Nov  8 12:37:36 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 169
 170         From Ted Lemen <mellon@pepper.ncd.com>
 171         * mips-dis.c (print_insn_arg): Handle 'k'.
 172         * mips-opc.c: Make cache use k, not t.
 173
 174 Sun Nov  7 23:52:34 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 175
 176         * alpha-opc.h, alpha-dis.c (print_insn_alpha):  Add
 177         FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
 178         FLOAT_FORMAT_CODE to put out floating point register names.
 179
 180 Mon Nov  1 18:17:51 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 181
 182         * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
 183
 184 Thu Oct 28 17:42:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 185
 186         * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
 187
 188 Wed Oct 27 11:48:01 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 189
 190         * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
 191         larger than 32.  Moved dsxx32 variants first for disassembler.
 192
 193 Mon Oct 25 11:33:14 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
 194
 195         * z8kgen.c, z8k-opc.h: Add full lda information.
 196
 197 Tue Oct 19 12:39:25 1993  Jeffrey A Law  (law@cs.utah.edu)
 198
 199         * hppa-dis.c (print_insn_hppa): Do not emit a space after
 200         movb instructions.  Any necessary space will be emitted by
 201         the code to handle nullification completers.
 202
 203 Wed Oct 13 16:19:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 204
 205         * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
 206
 207 Fri Oct  8 02:34:21 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 208
 209         * alpha-opc.h:  Add ldl_l, fix typo for ldq_u.
 210         * alpha-dis.c (print_insn_alpha):  Add code for PAL_FORMAT_CODE.
 211
 212 Tue Oct  5 17:47:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 213
 214         * mips-opc.c: Correct lwu opcode value (book had it wrong).
 215
 216 Thu Sep 30 11:26:18 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
 217
 218         * z8k-dis.c (FETCH_DATA): get just the right amount of data.
 219         (unpack_instr): Cope with ARG_IMM4M1 type instructions.
 220
 221 Wed Sep 29 16:24:49 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
 222
 223         * m88k-dis.c (m88kdis): comment change.  Remove space after
 224           printing mnemonic.
 225           (printop): handle new arg types DEC and XREG for m88110.
 226
 227 Tue Sep 28 19:20:16 1993  Jeffrey A Law (law@snake.cs.utah.edu)
 228
 229         * hppa-dis.c (print_insn_hppa): Handle 'z' operand
 230         type for absolute branch addresses.  Delete special
 231         "ble" and "be" code in 'W' operand code.
 232
 233 Fri Sep 24 14:08:33 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 234
 235         * mips-opc.c: Set hazard information correctly for branch
 236         likely instructions.
 237
 238 Fri Sep 17 04:41:17 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 239
 240         * alpha-dis.c (print_insn_alpha), alpha-opc.h:  Fix bugs, use
 241         info->fprintf_func for printing and info->print_address_func for
 242         address output.
 243
 244 Wed Sep 15 12:12:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 245
 246         * mips-opc.c: Set INSN_TRAP for tXX instructions.
 247
 248 Thu Sep  9 10:11:27 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 249
 250         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
 251         Corrected second case of "b" for disassembler.
 252
 253 Tue Sep  7 14:25:15 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 254
 255         * mips-dis.c, m88k-dis.c: Don't include libbfd.h.  Changed calls
 256         to BFD swapping routines to correspond to BFD name changes.
 257
 258 Thu Sep  2 10:35:25 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 259
 260         * mips-opc.c: Change div machine instruction to be z,s,t rather
 261         than s,t.  Change div macro to be d,v,t rather than d,s,t.
 262         Likewise for divu, ddiv, ddivu.  Added z,s,t case for drem, dremu,
 263         rem and remu which generates only the corresponding div
 264         instruction.  This is for compatibility with the MIPS assembler,
 265         which only generates the simple machine instruction when an
 266         explicit destination of $0 is used.
 267         * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
 268
 269 Thu Aug 26 17:41:44 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 270
 271         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
 272         WR_31 hazard for bal, bgezal, bltzal.
 273
 274 Thu Aug 26 17:20:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 275
 276         * hppa-dis.c (print_insn_hppa): Use print function
 277         from within the disassemble_info, not fprintf_filtered.
 278
 279 Wed Aug 25 13:51:40 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
 280
 281         * hppa-dis.c (print_insn_hppa): Handle '|' like '>'.  (From Jeff
 282         Law, law@cs.utah.edu.)
 283
 284 Mon Aug 23 12:44:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 285
 286         * mips-opc.c ("absu"): Removed.
 287         ("dabs"): Added.
 288
 289 Fri Aug 20 10:52:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 290
 291         * mips-opc.c: Added r6000 and r4000 instructions and macros.
 292         Changed hazard information to distinguish between memory load
 293         delays and coprocessor load delays.
 294
 295 Wed Aug 18 15:39:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 296
 297         * mips-opc.c: li.d uses "T,L", not "S,F".  Added li.s.
 298
 299 Tue Aug 17 09:44:42 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
 300
 301         * configure.in: Don't pass cpu to config.bfd.
 302
 303 Tue Aug 17 12:23:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 304
 305         * m88k-dis.c (m88kdis): Make class unsigned.
 306
 307 Thu Aug 12 15:08:18 1993  Ian Lance Taylor  (ian@cygnus.com)
 308
 309         * alpha-dis.c (print_insn_alpha): One branch format case was
 310         missing the instruction name.
 311
 312 Wed Aug 11 19:29:39 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
 313
 314         * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
 315         Add the arch-specific auxiliary files.
 316         (OFILES): Remove the arch-specific auxiliary files
 317         and use BFD_MACHINES instead of DIS_LIBS.
 318         * configure.in: Set BFD_MACHINES based on --with-targets option.
 319
 320 Thu Aug 12 12:04:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 321
 322         * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b).  Similarly
 323         for swc1.
 324
 325 Sun Aug  8 15:09:30 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 326
 327         * sparc-opc.c: Change CONST to const to deal with gcc
 328         -Dconst=__const -traditional.
 329
 330 Fri Aug  6 10:58:55 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 331
 332         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
 333         coprocessor instructions out of #if 0, and made them use new
 334         argument type "C".
 335
 336 Thu Aug  5 17:11:06 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 337
 338         * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
 339
 340 Fri Jul 30 18:48:15 1993  John Gilmore  (gnu@cygnus.com)
 341
 342         * sparc-opc.c:  Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
 343         instruction, for use by the disassembler.
 344
 345         * sparc-dis.c (SEX):  Add sign extension macro.  Replace many
 346         hand-coded sign extensions that depended on 32-bit host ints.
 347         FIXME, we still depend on big-endian host bitfield ordering.
 348         (sparc_print_insn):  Set the insn_info_valid field, and the
 349         other fields that describe the instruction being printed.
 350
 351 Tue Jul 27 17:04:58 1993  Jim Wilson  (wilson@sphagnum.cygnus.com)
 352
 353         * sparc-opc.c (call): Accept all 6 addressing modes valid for
 354         `jmp' instead of just one of them.
 355
 356 Wed Jul 21 11:43:32 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
 357
 358         * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
 359         (fput_fp_reg_r): Renamed from fput_reg_r.
 360         (fput_fp_reg): New function.
 361         (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
 362
 363         * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
 364
 365         * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
 366
 367 Mon Jul 19 13:52:21 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
 368
 369         * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
 370
 371         * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
 372         don't output a space.
 373
 374         * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
 375
 376 Sun Jul 18 16:30:02 1993  Jim Kingdon  (kingdon@rtl.cygnus.com)
 377
 378         * mips-opc.c: New file, containing opcode table from
 379         ../include/opcode/mips.h.
 380         * Makefile.in: Add it.
 381
 382 Thu Jul 15 12:37:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 383
 384         * m88k-dis.c: New file, moved in from gdb and changed to use the
 385         new dis-asm.h disassembler interface.
 386         * Makefile.in (DIS_LIBS): Added m88k-dis.o.
 387         (m88k-dis.o): New target.
 388
 389 Tue Jul 13 10:04:16 1993  Ian Lance Taylor  (ian@cygnus.com)
 390
 391         * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
 392         argument string const char * to correspond to opcode/mips.h.
 393
 394 Tue Jul  6 15:18:37 1993  Ian Lance Taylor  (ian@cygnus.com)
 395
 396         * mips-dis.c: Updated to account for name changes in new version
 397         of opcode/mips.h.
 398         * Makefile.in: Added header file dependencies.
 399
 400 Sat Jul  3 23:47:56 1993  Doug Evans  (dje@canuck.cygnus.com)
 401
 402         * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
 403
 404 Thu Jul  1 12:23:38 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 405
 406         * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
 407         extend, rather than shifts.
 408
 409 Sun Jun 20 20:56:56 1993  Ken Raeburn  (raeburn@poseidon.cygnus.com)
 410
 411         * Makefile.in: Undo 15 June change.
 412
 413 Fri Jun 18 14:15:15 1993  Per Bothner  (bothner@deneb.cygnus.com)
 414
 415         * m68k-dis.c (print_insn_arg):  Change return value to byte count
 416         or error code.
 417         * m68k-dis.c:  Re-write to detect invalid operands before
 418         printing anything, so we can handle this the same way we
 419         handle invalid opcodes.
 420
 421 Thu Jun 17 15:01:36 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
 422
 423         * sh-dis.c, sh-opc.h: Understand some more opcodes.
 424
 425 Wed Jun 16 13:48:05 1993  Ian Lance Taylor  (ian@cygnus.com)
 426
 427         * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
 428         header files.
 429
 430 Tue Jun 15 21:45:26 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
 431
 432         * sparc-dis.c: Don't declare qsort, since sysdep.h might.
 433
 434         * configure.in: Do make sysdep.h link.
 435         * Makefile.in: Search ../include.  Don't search ../bfd.
 436
 437 Tue Jun 15 13:36:10 1993  Stu Grossman  (grossman@cygnus.com)
 438
 439         Changes from Jeff Law, law@cs.utah.edu:
 440         * hppa-dis.c: Fix typo.  'a' and 'd' were reversed.
 441         Do not print a space before the completers specified by
 442         'a' and 'd'.
 443
 444 Fri Jun 11 18:40:21 1993  Ken Raeburn  (raeburn@cygnus.com)
 445
 446         * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
 447         defined, since gdb has been fixed.
 448
 449         Changes from Jeff Law, law@cs.utah.edu:
 450         * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
 451         fput_reg_r, fput_creg, fput_const, and fputs_filtered should
 452         be a *disassemble_info, not a *FILE.
 453         * hppa-dis.c: Support 'd', '!', and 'a'.
 454         * hppa-dis.c: Support 's' to extract a 2 bit space register.
 455         * hppa-dis.c: Delete cases which are no longer needed.
 456
 457 Fri Jun 11 07:53:48 1993  Jim Kingdon  (kingdon@cygnus.com)
 458
 459         * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
 460
 461 Tue Jun  8 12:25:01 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
 462
 463         * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
 464         H8/300-H opcodes.
 465
 466 Mon Jun  7 12:58:49 1993  Per Bothner  (bothner@rtl.cygnus.com)
 467
 468         * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
 469         * configure.in:  No longer need to configure to get sysdep.h.
 470
 471 Thu Jun  3 15:56:49 1993  Stu Grossman  (grossman@cygnus.com)
 472
 473         * Patches from Jeffrey Law <law@cs.utah.edu>.
 474         * hppa-dis.c: Support 'I', 'J', and 'K' in output
 475         templates for 1.1 FP computational instructions.
 476
 477 Tue May 25 13:05:48 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
 478
 479         * h8500-dis.c (print_insn_h8500): Address argument is type
 480         bfd_vma.
 481         * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
 482         Ditto.
 483
 484         * h8500-opc.h (addr_class_type): No comma at end of enumerator.
 485         * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
 486
 487         * sparc-dis.c (compare_opcodes): Move static declaration to
 488         top-level.
 489
 490 Fri May 21 14:17:37 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 491
 492         * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
 493         instruction, remove unimp hack from 'l' argument.
 494
 495 Wed May 19 15:35:54 1993  Stu Grossman  (grossman@cygnus.com)
 496
 497         * z8k-dis.c (fetch_data):  Use unsigned char to make ancient gcc's
 498         happy.
 499
 500 Fri May 14 15:22:46 1993  Ian Lance Taylor  (ian@cygnus.com)
 501
 502         * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
 503         * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
 504         instructions.
 505
 506 Fri May 14 00:09:14 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
 507
 508         * hppa-dis.c: Include dis-asm.h before sysdep.h.  Changed some
 509         arrays of string pointers to 2-d arrays of chars, to save
 510         space.
 511
 512 Thu May  6 20:51:17 1993  Fred Fish  (fnf@cygnus.com)
 513
 514         * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
 515         Cast second arg to read_memory_func to "bfd_byte *", as necessary.
 516
 517 Tue May  4 20:31:10 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
 518
 519         * hppa-dis.c: New file from Utah, adapted to new disassembler
 520         calling interface.
 521         * Makefile.in: Include it.
 522
 523 Mon Apr 26 18:17:42 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
 524
 525         * sh-dis.c, sh-opc.h: New files.
 526
 527 Fri Apr 23 18:51:22 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
 528
 529         * alpha-dis.c, alpha-opc.h: New files.
 530
 531 Tue Apr  6 12:54:08 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 532
 533         * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
 534         value.
 535
 536 Mon Apr  5 17:37:37 1993  John Gilmore  (gnu@cygnus.com)
 537
 538         * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
 539
 540 Fri Apr  2 07:24:27 1993  Ian Lance Taylor  (ian@cygnus.com)
 541
 542         * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
 543         const.
 544
 545 Thu Apr  1 11:20:43 1993  Jim Kingdon  (kingdon@cygnus.com)
 546
 547         * sparc-dis.c: Use fprintf_func a few places where I forgot,
 548         and double percent signs a few places.
 549
 550         * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
 551
 552         * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
 553         Use info->print_address_func not print_address.
 554
 555         * dis-buf.c (generic_print_address): New function.
 556
 557 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 558
 559         * Makefile.in: Add sparc-dis.c.
 560         sparc-dis.c: New file, merges binutils and gdb versions as follows:
 561         From GDB:
 562             Add `add' instruction to the set that get checked
 563             for a preceding `sethi' in order to print an absolute address.
 564             * (print_insn):  Disassembly prefers real instructions.
 565             (is_delayed_branch):  Speed up.
 566             * sparc-opcode.h: Add ALIAS bit to aliases.  Fix up opcode tables.
 567             Still missing some float ops, and needs testing.
 568             * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
 569             F_ALIAS.  Use printf, not fprintf, when not passing a file
 570             pointer...
 571             (compare_opcodes): Check that identical instructions have
 572             identical opcodes, complain otherwise.
 573         From binutils:
 574             * New 'm' arg.
 575             * Include reg_names.
 576         From neither:
 577             Use dis-asm.h/read_memory_func interface.
 578
 579 Wed Mar 31 20:49:06 1993  K. Richard Pixley  (rich@rtl.cygnus.com)
 580
 581         * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
 582           deliberately return non-zero to setjmp from longjmp.  Otherwise
 583           this code fails to compile.
 584
 585 Wed Mar 31 17:04:31 1993  Stu Grossman  (grossman@cygnus.com)
 586
 587         * m68k-dis.c:  Fix prototype for fetch_arg().
 588
 589 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 590
 591         * dis-buf.c: New file, for new read_memory_func interface.
 592         Makefile.in (OFILES): Include it.
 593         m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
 594         Use new read_memory_func interface.
 595
 596 Mon Mar 29 14:02:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
 597
 598         * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
 599         * h8500-opc.h: Fix couple of opcodes.
 600
 601 Wed Mar 24 02:03:36 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
 602
 603         * Makefile.in: add dvi & installcheck targets
 604
 605 Mon Mar 22 18:55:04 1993  John Gilmore  (gnu@cygnus.com)
 606
 607         * Makefile.in:  Update for h8500-dis.c.
 608
 609 Fri Mar 19 14:27:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
 610
 611         * h8500-dis.c, h8500-opc.h: New files
 612
 613 Thu Mar 18 14:12:37 1993  Per Bothner  (bothner@rtl.cygnus.com)
 614
 615         * mips-dis.c, z8k-dis.c:  Converted to use interface defined in
 616         ../include/dis-asm.h.
 617         * m68k-dis.c:  New file (merge of ../binutils/m68k-pinsn.c
 618         and ../gdb/m68k-pinsn.c).
 619         * i386-dis.c:  New file (merge of ../binutils/i386-pinsn.c
 620         and ../gdb/i386-pinsn.c).
 621         * m68881-ext.c:  New file.  Moved definition of
 622         ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
 623         * Makefile.in:  Adjust for new files.
 624         * i386-dis.c:  Patches from John Hassey (hassey@dg-rtp.dg.com).
 625         * m68k-dis.c:  Recognize '9' placement code, so (say) pflush
 626         can be dis-assembled.
 627
 628 Wed Feb 17 09:19:47 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
 629
 630         * mips-dis.c (print_insn_arg): Now returns void.
 631
 632 Mon Jan 11 16:09:16 1993  Fred Fish  (fnf@cygnus.com)
 633
 634         * mips-dis.c (ansidecl.h):  Include for benefit of sysdep.h
 635         files that use the macros.
 636
 637 Thu Jan  7 13:15:17 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 638
 639         * mips-dis.c: New file, from gdb/mips-pinsn.c.
 640         * Makefile.in (DIS_LIBS): Added mips-dis.o.
 641         (CFILES): Added mips-dis.c.
 642
 643 Thu Jan  7 07:36:33 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
 644
 645         * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
 646         * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
 647
 648 Tue Dec 22 15:42:44 1992  Per Bothner  (bothner@rtl.cygnus.com)
 649
 650         * Makefile.in:  Improve *clean rules.
 651         * configure.in:  Allow a default host.
 652
 653 Tue Nov 17 19:53:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
 654
 655         * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
 656         files include other sysdep files
 657
 658 Thu Nov 12 16:10:37 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
 659
 660         * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
 661
 662 Fri Oct  9 04:56:05 1992  John Gilmore  (gnu@cygnus.com)
 663
 664         * configure.in:  For host support, use ../bfd/configure.host
 665         so it stays in sync with the ../bfd/hosts database.
 666
 667 Thu Oct  1 23:38:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
 668
 669         * configure.in: use cpu-vendor-os triple instead of nested cases
 670
 671 Wed Sep 30 16:09:20 1992  Michael Werner  (mtw@cygnus.com)
 672
 673         * z8k-dis.c (unparse_instr): fix bug where opcode returned was
 674         *always* the wrong one.
 675
 676 Wed Sep 30 07:42:17 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
 677
 678         * z8kgen.c: added copyright info
 679
 680 Tue Sep 29 12:20:21 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
 681
 682         * z8k-dis.c (unparse_instr): prettier tabs
 683         * z8kgen.c -> z8k-opc.h: bug fixes in tables
 684
 685 Fri Sep 25 12:50:32 1992  Stu Grossman  (grossman at cygnus.com)
 686
 687         * configure.in:  Add ncr* configuration.
 688         * z8k-dis.c (struct instr_data_s):  Make instr_asmsrc char to make
 689         picayune ANSI compilers happy.
 690
 691 Sep 20 08:50:55 1992  Fred Fish  (fnf@cygnus.com)
 692
 693         * configure.in (i386):  Make i386 and i486 synonymous for now.
 694         * configure.in (i[34]86-*-sysv4):  Add my_host definition.
 695
 696 Fri Sep 18 17:01:23 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
 697
 698         * Makefile.in (install): Fix typo.
 699
 700 Fri Sep 18 02:04:24 1992  John Gilmore  (gnu@cygnus.com)
 701
 702         * Makefile.in (make):  Remove obsolete crud.
 703         (sparc-opc.o):  Avoid Sun Make VPATH bug.
 704
 705 Tue Sep  8 17:29:27 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
 706
 707         * Makefile.in: since there are no SUBDIRS, remove rule and
 708         references of subdir_do.
 709
 710 Tue Sep  8 17:02:58 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
 711
 712         * Makefile.in (install): Get the library name right here too.
 713         Don't install bfd.h, since it's unrelated to this library.  No
 714         subdirs to recurse into, either.
 715         (CFILES): The source file has a .c suffix, not .o.
 716
 717         * sparc-opc.c: New file, moved from BFD.
 718         * Makefile.in (OFILES): Build it.
 719
 720 Thu Sep  3 16:59:20 1992  Michael Werner  (mtw@cygnus.com)
 721
 722         * z8k-dis.c: fixed forward refferences of some declarations.
 723
 724 Mon Aug 31 16:09:45 1992  Michael Werner  (mtw@cygnus.com)
 725
 726         * Makefile.in: get the name of the library right
 727
 728 Mon Aug 31 13:47:35 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
 729
 730         * z8k-dis.c: knows how to disassemble z8k stuff
 731         * z8k-opc.h: new file full of z8000 opcodes
 732
 733 \f
 734 Local Variables:
 735 version-control: never
 736 End: