2 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
4 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
6 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
8 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
9 (_print_insn_mips): Likewise.
10 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
14 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
16 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
17 (cgen_hw_lookup_by_num): New function.
20 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
23 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
25 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
27 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
29 * sparc-dis.c (print_insn_sparc): Always fetch instructions
30 as big-endian on SPARClite.
33 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
35 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
37 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
41 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
43 * d30v-opc.c (pre_defined_register): Remove alias for r0.
46 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
48 * mips-opc.c (break): Added 20-bit single-operand break
49 instruction for R5900 only.
52 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
54 * po/Make-in (install-info): New target.
56 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
58 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
61 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
63 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
64 variety of ISA2 instructions to set bottom ten bits of trap code.
66 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
68 * Makefile.am (config.status): Add explicit target so that
69 config.status depends upon bfd/configure.in.
70 * Makefile.in: Rebuild.
72 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
74 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
75 instructions to set bottom ten bits of break code.
76 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
77 for above optional argument.
80 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
82 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
83 * m32r-opc.h: Regenerate.
86 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
88 * makefile.vms: Run dec c with /nodebug.
90 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
92 * Makefile.in: Rebuilt.
93 * Makefile.am: Regenerated dependencies with mkdep.
95 * opintl.h (_): Define as dgettext.
98 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
100 * configure.in: Add support for --enable-cgen-maint.
101 * Makefile.am (M32R_DEPS): New variable.
102 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
103 * aclocal.m4: Regenerate.
104 * Makefile.in: Regenerate.
105 * configure: Regenerate.
107 * Makefile.am (CGENFILES): Add minsn.scm.
110 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
112 * cgen-asm.c: Internationalised.
113 start-sanitize-cygnus
114 * cgen-asm.in: Internationalised.
115 * cgen-opc.in: Internationalised.
117 * m32r-asm.c: Internationalised.
118 * m32r-dis.c: Internationalised.
119 * m32r-opc.c: Internationalised.
121 * aclocal.m4: Regenerated.
122 * configure: Regenerated.
123 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
124 * Makefile.in: Rebuild.
125 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
126 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
128 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
130 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
132 * aclocal.m4, configure: Rebuild with current tools.
134 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
136 * opintl.h: New file - contains internationalisation macros used
137 by source files in this directory.
138 * po/: New subdirectory - contains internationalisation files.
139 * po/Make-in: New file - Makefile constructor.
140 * po/POTFILES.in: New file - list of files in opcodes directory
141 that should be scan for internationalisation macros.
142 * po/opcodes.pot: New file - list of internationisation strings
143 found in files mentioned in po/POTFILES.in.
144 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
145 entry. Add intl directory to include paths.
146 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
147 HAVE_STRCPY, HAVE_LC_MESSAGES
148 * configure.in: Add rule to build Makefile in po subdirectory.
149 * Makefile.in: Rebuilt.
150 * aclocal.m4: Rebuilt.
151 * config.in: Rebuilt.
152 * configure: Rebuilt.
153 * alpha-opc.c: Internationalised.
154 * arc-dis.c: Internationalised.
155 * arc-opc.c: Internationalised.
156 * arm-dis.c: Internationalised.
157 * cgen-asm.c: Internationalised.
159 * d30v-dis.c: Internationalised.
161 * dis-buf.c: Internationalised.
163 * dvp-dis.c: Internationalised.
164 * dvp-opc.c: Internationalised.
166 * h8300-dis.c: Internationalised.
167 * h8500-dis.c: Internationalised.
168 * i386-dis.c: Internationalised.
169 * m10200-dis.c: Internationalised.
170 * m10300-dis.c: Internationalised.
171 * m68k-dis.c: Internationalised.
172 * m88k-dis.c: Internationalised.
173 * mips-dis.c: Internationalised.
174 * ns32k-dis.c: Internationalised.
175 * opintl.h: Internationalised.
176 * ppc-opc.c: Internationalised.
177 * sparc-dis.c: Internationalised.
178 * v850-dis.c: Internationalised.
179 * v850-opc.c: Internationalised.
181 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
183 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
184 (asm_hash_table_entries): New variable.
185 (cgen_asm_init): Free asm_hash_table_entries.
186 (hash_insn_array,hash_insn_list): New functions.
187 (build_asm_hash_table): Use them. Hash macro insns as well.
188 (cgen_asm_lookup_insn): Update.
189 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
190 (dis_hash_table_entries): New variable.
191 (cgen_dis_init): Free dis_hash_table_entries.
192 (hash_insn_array,hash_insn_list): New functions.
193 (build_dis_hash_table): Use them. Hash macro insns as well.
194 (cgen_dis_lookup_insn): Update.
195 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
196 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
197 (cgen_macro_insn_count): New function.
198 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
199 All callers updated. Sanity check result of extract fn.
200 (@arch@_cgen_get_insn_operands): Change result type to void.
201 Delete args insn_value, length. New arg fields. All callers updated.
202 (@arch@_cgen_lookup_get_insn_operands): New function.
203 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
205 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
207 * i386-dis.c (OP_DSSI): Print segment override.
210 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
212 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
216 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
218 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
222 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
224 * vu0.h (vlqd, vlqi): Update per revised specs.
228 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
230 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
231 (vif_operands): Update.
232 (vif_get_unpackloc): Delete.
233 (state_vif_unpackloc{,_star_p}): Delete.
234 (dvp_opcode_init_parse): Update.
235 (vif_unpack_len_value): Avoid divide by zero.
239 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
241 * vu0.h: Specs changed for VCALLMSR bit pattern.
242 * mips-dis.c: (print_insn_arg) Matching change.
245 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
247 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
250 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
252 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
253 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
254 * configure.in: Define and substitute WIN32LDFLAGS and
256 * aclocal.m4: Rebuild with new libtool.
257 * configure, Makefile.in: Rebuild.
260 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
262 * vu0.h: Corrected bit pattern for VMAXI opcode.
265 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
267 * m32r-opc.c: Regenerate.
270 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
272 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
273 (dvp_expand_macro): Implement.
274 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
275 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
278 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
280 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
281 before trying to copy it.
282 * Makefile.in: Rebuild.
284 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
286 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
289 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
291 * m32r-opc.c: Fix bit patterns for SAT and SATB.
294 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
296 * ns32k-dis.c (bit_extract_simple): New function to extract bits
297 from an arbitrary valid buffer instead of fetching them on demand
299 (invalid_float): use bit_extract_simple() instead of bit_extract().
302 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
304 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
305 * m32r-opc.h: Add extra control registers.
308 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
310 From H.J. Lu <hjl@gnu.org>:
311 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
314 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
316 * Branched binutils 2.9.
319 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
321 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
322 disassembling last 4 bytes of a section.
325 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
327 Fix some gcc -Wall warnings:
328 * arc-dis.c (print_insn): Add casts to avoid warnings.
329 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
330 * d10v-dis.c (dis_long, dis_2_short): Likewise.
332 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
333 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
334 (parse_bc, parse_vfreg, parse_accdest): Likewise.
335 (parse_ffstreg, parse_vif_mode): Likewise.
337 * m10200-dis.c (disassemble): Likewise.
338 * m10300-dis.c (disassemble): Likewise.
339 * ns32k-dis.c (print_insn_ns32k): Likewise.
340 * ppc-opc.c (insert_ral, insert_ram): Likewise.
341 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
342 * cgen-opc.c (cgen_keyword_search_next): Likewise.
343 * d10v-dis.c (dis_long, dis_2_short): Likewise.
345 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
348 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
349 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
350 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
352 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
354 * tic80-dis.c (print_one_instruction): Likewise.
356 * w65-dis.c (print_operand): Likewise.
357 * z8k-dis.c (fetch_data): Likewise.
358 * a29k-dis.c: Add return type for find_byte_func_type.
359 * arc-opc.c: Include <stdio.h>. Remove declarations of
360 insert_multshift and extract_multshift.
362 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
364 (extract_value): Fully parenthesize expression.
367 * dvp-opc.c: Include <ctype.h>.
368 (print_sdest): Add default case to switch.
370 * h8500-dis.c (print_insn_h8500): Initialize local variables.
371 * h8500-opc.h (h8500_table): Fully bracket initializer.
372 * w65-opc.h (optable): Likewise.
373 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
374 * i386-dis.c (OP_E): Initialize local variables.
375 * m10200-dis.c (print_insn_mn10200): Likewise.
376 * mips-dis.c (print_insn_mips16): Likewise.
377 * sh-dis.c (print_insn_shx): Likewise.
378 * v850-dis.c (print_insn_v850): Likewise.
379 * ns32k-dis.c (print_insn_arg): Declare.
380 (get_displacement, invalid_float): Declare.
381 (list_search, sign_extend, flip_bytes): Declare return type.
382 (get_displacement): Likewise.
383 (print_insn_arg): Likewise. Make d int. Fix sprintf format
385 (print_insn_ns32k): Make i unsigned.
386 (invalid_float): Make static. Declare type of val.
387 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
388 on each for iteration.
389 * tic30-dis.c (get_indirect_operand): Likewise.
390 * z8k-dis.c (print_insn_z8001): Declare return type.
391 (print_insn_z8002): Likewise.
392 (unparse_instr): Fix sprintf format strings.
394 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
396 * mips-opc.c: Add "sync.l" and "sync.p".
399 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
401 * dvp-opc.c (extract_vif_datalen): Rewrite.
402 (vif_insn_len): Perform 0->max+1 conversion for direct length.
404 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
406 * dvp-dis.c (print_insn): Print unpack address in hex.
407 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
408 Don't skip over '*', just record it.
409 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
410 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
411 Don't skip over '*', just record it.
412 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
413 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
414 (vif_opcodes): Likewise.
415 (state_vif_{mpg,unpack}loc_star_p): New static locals.
416 (vif_macros,vif_macro_count): New globals.
417 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
418 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
419 (vif_get_wl_cl): New function.
420 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
423 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
425 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
426 default m68k variant to recognize.
428 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
429 (ctrl, cobr, mem, ea): Likewise.
430 (print_addr): Likewise. Remove cast.
431 (ea): Cast argument of print_addr to bfd_vma.
433 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
435 (cgen_parse_unsigned_integer): Likewise.
436 (cgen_parse_address): Likewise.
438 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
440 * i960-dis.c (ctrl): Add full braces to structure initialization.
441 (cobr, mem, reg): Likewise.
442 (ea): Correct parenthesization in expression.
444 * cgen-asm.c: Include <ctype.h>.
445 (build_asm_hash_table): Remove unused local variable i.
446 (cgen_parse_keyword): Add casts to avoid warnings.
448 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
449 symbol. Fix indentation.
450 (print_insn_little_arm): Likewise.
453 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
455 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
460 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
462 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
467 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
469 * dvp-opc.c (vif_operand_datalen_special): New global.
473 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
475 * vu0.h (vcallms): Use 'O' for call target operand.
476 * mips-dis.c (print_insn_arg): Handle 'O'.
479 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
481 * configure.in: Use AM_DISABLE_SHARED.
482 * aclocal.m4, configure: Rebuild with libtool 1.2.
485 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
487 * mips-dis.c: Change '%' to '#' to avoid conflict with vr5400
492 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
494 These patches are courtesy of Jonathan Walton and Tony Thompson
495 (athompso@cambridge.arm.com).
497 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
500 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
501 both the offset and the label closest to the destination.
504 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
506 * vu0.h: New file with cop2/vu0 instructions.
507 * mips-opc.c: Include vu0.h.
508 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
510 (print_insn_mips): Do not emit a tab after an instruction if the
511 first arg is an instruction completer (&). If the next arg is an
512 escape character (%), then print the next arg verbatim.
513 * Makefile.am (mips-opc.lo): Depend on vu0.h
517 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
519 * dvp-opc.c (vif_opcodes): Add stcycl.
521 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
523 * dvp-dis.c (print_dma): Change length from 16 to 8.
526 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
528 * m32r-opc.h: Regenerate.
531 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
533 * dvp-opc.c (print_dest1): Print dest spec again.
534 (print_vfreg,print_accdest): Likewise.
535 (vif_unpack_len): Round result up to word boundary.
538 start-sanitize-vr4320
539 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
541 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
543 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
545 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
550 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
552 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
553 (print_insn): Do mask comparison on proper opcode word.
554 Print unsigned values in hex.
555 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
556 (parse_bc): Catch missing dest.
557 (parse_vfreg): Replace atoi call with strtol.
558 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
559 (parse_bcftreg,parse_ffstreg): Handle missing dest.
560 (extract_gif_eop): New function.
561 (gif_operands): Update eop entry.
562 (VGIFOP,VGIFNREGS): Fix calcs.
563 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
564 (gif_regs): Add entry for unused 11 case.
565 (print_gif_regs): Print empty list instead of nothing.
566 (extract_gif_nloop): Fix value calc.
567 (print_gif_nloop): Always print value, even if 0.
568 (insert_vif_wlcl,extract_vif_wlcl): New functions.
569 (vif_operands): Use them for wl,cl fields.
570 (state_vif_wl,state_vif_cl): New static locals.
571 (parse_vif_mode): Handle numeric args.
572 (vif_unpack_len_value,vif_unpack_len): New functions.
573 (vif_insn_len): Call vif_unpack_len.
576 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
578 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
580 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
582 * cgen-asm.in: Move insertion of generated routines to top of file.
583 (insert_normal): Add prototype. Delete `shift' arg.
584 * cgen-dis.in: Move insertion of generated routines to top of file.
585 (extract_normal): Add prototype. Delete `shift' arg.
586 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
587 (print_keyword): Add prototype. Fix type of `attrs' arg.
589 start-sanitize-vr4320
590 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
592 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
593 * mips-opc.c ("mac","dmac") : Added 4320 insns.
596 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
598 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
599 assume that info->symbols is non-empty.
601 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
603 * alpha-opc.c (cvtqs) There is no such thing.
604 (cvttq): Missing most of the /*d variants.
607 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
609 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
611 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
612 (r5900/msub.s): Takes three operands, not four. Fix opcode.
616 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
618 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
619 delayed branches or jumps.
623 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
625 * dvp-opc.c (vif_operands): Add unpack[u] support.
626 (vif_opcodes): Ditto.
627 (*_vif_imrubits): Renamed from *_vif_imrbits.
629 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
631 * dvp-dis.c (print_insn): Handle word number.
632 Handle mips address vs vu address.
633 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
634 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
635 ({insert,extract}_dma_addr): Fix word ofset.
636 ({insert,print}_gif_regs): Fix encode/decode.
639 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
641 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
643 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
644 * tic30-dis.c (print_branch): Likewise.
646 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
647 * dvp-dis.c (dvp_info_mach_type): New function.
648 (print_insn_dvp): Call it.
649 (print_vif): Return length of 4 if mpg or direct insn so following
650 insns get properly disabled.
651 (print_gif): Fix word order.
652 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
653 (gif_operands): Fix word order.
654 (gif_opcodes): Likewise.
655 ({insert,extract,print}_gif_regs): Likewise.
656 (gif_regs): Add new register number/name changes.
657 (dma_opcodes): Add dmarefe insn.
660 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
662 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
663 saved_symbol code as it is no longer needed.
665 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
667 * cgen-asm.c: Include symcat.h.
668 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
670 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
673 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
675 * dvp-opc.c (extra_dma_flags): Fix typos.
676 (dma_operands): Fix word numbers.
677 (dma_opcodes): Likewise.
678 ({insert,extract}_dma_flags): Likewise.
681 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
683 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
686 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
688 * dvp-dis.c (print_gif): Complete.
689 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
690 (state_gif_{nregs,regs,nloop}): New static locals.
692 (dvp_opcode_init_{parse,print}): Init gif state locals.
693 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
694 (vif_insn_len): Handle `unpack'.
695 ({insert,extract}_dma_flags): Complete.
699 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
701 * mips-opc.c (mula.s): Renamed from multa.s.
704 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
706 * m32r-opc.[ch]: Regenerate.
709 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
711 * dvp-opc.c (dma_operands): Rewrite.
712 (dma_operand_{count,addr}): New globals.
713 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
714 (insert_dma_addr): Insert value into insn.
715 (extract_dma_addr): Extract value from insn.
717 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
719 * dvp-dis.c (print_vu): Handle loi insns.
720 (print_insn): Likewise.
721 * dvp-opc.c (vu_lower_opcodes): Add "loi".
722 (vu_operands): Make LDEST1 a FAKE operand.
723 (parse_dest1): Allow elided argument.
724 (print_dest1): Don't print the argument.
726 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
728 * dvp-opc.c (parse_vfreg): Dest spec is optional.
729 (print_vfreg): Don't print dest spec.
730 (parse_accdest): Dest spec is optional.
731 (print_accdest): Don't print dest spec.
734 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
736 * Makefile.am (CGENFILES): Update.
737 * Makefile.in: Regenerate.
738 * cgen-asm.in (insert_normal): Result is error message now.
739 Validate value to be inserted.
740 (insert_insn_normal): Result is error message now.
741 (@arch@_cgen_assemble_insn): Update.
742 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
743 arguments. Don't perform validation here.
744 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
746 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
748 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
749 operand instance list.
750 * m32r-opc.c: Regenerate.
752 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
754 * Makefile.am (AUTOMAKE_OPTIONS): Define.
755 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
757 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
759 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
761 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
763 * configure.in: Get the version number from BFD.
764 * configure: Rebuild.
766 From H.J. Lu <hjl@gnu.org>:
767 * Makefile.am (libopcodes_la_LDFLAGS): Define.
768 * Makefile.in: Rebuild.
770 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
772 * m32r-opc.c: Regenerate.
773 * m32r-opc.h: Regenerate.
775 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
777 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
778 Ignore ALIAS insns if asked to.
779 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
780 * m32r-opc.c: Regenerate.
783 * dvp.opc.c: Nicely format opcode tables.
784 (vu_operands): New element UFLAGS.
785 (parse_uflags,print_uflags): New functions.
786 (vu_upper_opcodes): Add UFLAGS to all insns.
789 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
791 Fix rac to accept only a0:
792 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
793 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
794 Introduce OPERAND_GPR.
795 * d10v-dis.c (print_operand): Likewise.
797 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
799 * cgen-opc.in: New file.
800 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
801 * Makefile.am (CGENFILES): Add cgen-opc.in.
802 * Makefile.in: Regenerate.
804 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
805 (cgen_hw_lookup): Make result const.
807 * cgen-dis.in (*): Use PTR instead of void *.
808 (print_insn): Delete unused vars `i', `syntax'.
810 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
813 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
815 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
816 (vif_opcodes): Update renamed insns.
817 * dvp-dis.c (*): Likewise.
820 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
822 * configure, aclocal.m4: Rebuild with new libtool.
825 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
827 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
828 instructions use a PC relative branch, not absolute.
831 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
833 * configure.in: Set libtool_enable_shared rather than
834 libtool_shared. Remove diversion hack.
835 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
837 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
839 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
840 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
842 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
844 * tic30-dis.c: New file.
845 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
846 * configure.in: Handle bfd_tic30_arch.
847 * Makefile.am: Rebuild dependencies.
848 (CFILES): Add tic30-dis.c
849 (ALL_MACHINES): Add tic30-dis.lo.
850 * configure, Makefile.in: Rebuild.
853 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
855 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
856 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
857 macwhi-a and macwlo-a instructions.
861 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
863 * dvp-opc.c, fixed encoding of a bunch of instructions to
864 be consistent with the asmvu assembler (and inconsistent
865 with the specification).
867 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
869 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
870 in the opcode table. The pkemscalf instruction must come first.
872 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
874 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
877 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
879 * m32r-opc.h (HAVE_CPU_M32R): Define.
882 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
884 * dvp-dis.c, dvp-opc.c: New files.
885 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
886 * configure: Regenerate.
887 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
888 (dvp-dis.lo,dvp-opc.lo): Add rules for.
889 (mips-dis.lo): Compile with @archdefs@.
890 * Makefile.in: Regenerate.
891 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
892 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
895 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
897 * v850-opc.c (insertion routines): If both alignment and size is
898 wrong then report this.
900 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
902 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
903 Only recognize instructions for the current target_processor.
905 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
907 * d10v-dis.c (PC_MASK): Correct value.
908 (print_operand): If there's a reloc, don't calculate the
909 address because they could be in different sections.
911 start-sanitize-cygnus
912 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
914 * cgen.sh: Rewrite to be like simulator's version.
915 * Makefile.am (cgen): Update call to cgen.sh.
916 * Makefile.in: Regenerate
919 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
921 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
922 instruction after the 4650's "mul" instruction; nobody's using the
923 4010 these days. If object files someday indicate which processor
924 variant they're intended for, we can do a better job at this.
927 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
929 * mips-opc.c (c.lt.s): Add r5900 variant.
933 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
935 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
936 table provided entry size. Use CGEN_INSN_MNEMONIC.
937 (cgen_parse_keyword): Rewrite.
938 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
939 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
940 * cgen-opc.c: Clean up pass over `struct foo' usage.
941 (cgen_keyword_lookup_value): Handle "" entry.
942 (cgen_keyword_add): Likewise.
943 start-sanitize-cygnus
944 * Makefile.am: Add cgen support.
945 * Makefile.in: Regenerate.
946 * configure.in: Add cgen support.
947 * configure: Regenerate.
948 * aclocal.m4: Regenerate.
949 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
952 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
954 * mips-opc.c: Add FP_D to s.d instruction flags.
956 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
958 * m68k-opc.c (halt, pulse): Enable them on the 68060.
961 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
963 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
964 PC relative offset forms before the 15 bit forms. An assembler command
965 line option now chooses the default.
969 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
971 * mips-opc.c: Add many missing r5900 instructions.
975 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
977 * d30v-opc.c (d30v_opcode_table): Set new flags bits
978 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
981 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
983 * configure: Only build libopcodes shared if --enable-shared's value
984 was `yes', or was set to `*opcodes*'.
985 * aclocal.m4: Likewise.
986 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
987 original source of this bit of code. It's not clear what the best fix
991 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
993 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
996 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
998 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
999 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1000 offset forms before the 15 bit forms, to default to the long forms.
1003 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1005 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1007 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1009 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1010 symbol if none is present.
1011 (print_insn_big_arm): Prevent examination of stored symbol if
1014 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1016 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1018 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1020 * disassemble.c: Remove disasm_symaddr() function.
1022 * arm-dis.c: Use info->symbol instead of info->flags to determine
1023 if disassmbly should be in Thumb or Arm mode.
1025 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1027 * arm-dis.c: Add support for disassembling Thumb opcodes.
1028 (print_insn_thumb): New function.
1030 * disassemble.c (disasm_symaddr): New function.
1032 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1033 (thumb_opcodes): Table of Thumb opcodes.
1035 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1037 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1039 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1040 and 'v' as operand types.
1042 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1044 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1045 <olivier.carmona@di.epfl.ch>.
1046 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1047 which has a two word opcode with a one word argument.
1050 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1052 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1053 unsigned, not signed.
1054 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1057 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1059 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1060 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1061 (ftrv): Slay the cut-and-paste monster.
1063 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1065 * d10v-dis.c (print_operand):
1066 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1068 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1070 * d10v-opc.c (OPERAND_FLAG): Split into:
1071 (OPERAND_FFLAG, OPERAND_CFLAG) .
1075 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1077 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1078 field for all INSN_MACRO's.
1079 * mips16-opc.c: same
1081 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1083 * mips-opc.c (sync,cache): These are 3900 insns.
1085 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1087 sh-opc.h (sh_table): Remove ftst/nan.
1089 start-sanitize-vr5400
1090 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
1092 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1093 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1095 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1099 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
1101 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1102 Add tx49 insns and configury.
1105 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1107 * mips-opc.c (ffc, ffs): Fix mask.
1110 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1112 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1116 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1118 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1119 start-sanitize-vr5400
1120 Added VR5400 instructions.
1121 (N5): New cpu-id macro.
1123 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1125 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1127 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1128 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1130 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1132 * v850-dis.c (disassemble): Replace // with /* ... */
1134 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1136 * sparc-opc.c: Add wr & rd for v9a asr's.
1137 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1138 (v9a_asr_reg_names): New variable.
1139 Patch from David Miller <davem@vger.rutgers.edu>.
1141 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1143 * sparc-opc.c (v9notv9a): New insn type.
1144 (IMPDEP): Move to the end to not conflict with edge8 et al.
1145 Patch from David Miller <davem@vger.rutgers.edu>.
1147 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1149 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1151 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1153 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1155 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1157 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1158 of disassemble_info structure to determine if an overlay address
1159 has a matching symbol in low memory.
1161 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1162 new symbol_at_address_func field in disassemble_info structure.
1164 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1166 * v850-opc.c (extract_d22): Use signed arithmatic.
1168 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1170 * mips-opc.c: Three op mult is not an ISA insn.
1172 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1174 * mips-opc.c: Fix formatting.
1176 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1178 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1179 than assuming that char is signed. Explicitly sign extend 16 bit
1180 values, rather than assuming that short is 16 bits.
1181 (OP_sI, OP_J, OP_DIR): Likewise.
1183 start-sanitize-v850e
1184 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1186 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1190 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1192 * v850-opc.c: Fix typo in comment.
1194 * v850-dis.c (disassemble): Add test of processor type when
1195 determining opcodes.
1197 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1199 * configure.in: Use a diversion to set enable_shared before the
1200 arguments are parsed.
1201 * configure: Rebuild.
1203 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1205 * m68k-opc.c (TBL1): Use ! rather than `.
1206 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1208 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1210 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1212 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1214 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1217 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1218 * aclocal.m4: Rebuild with new libtool.
1219 * configure: Rebuild.
1221 start-sanitize-v850e
1222 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1224 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1227 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1229 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1231 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1233 * v850-opc.c (v850_opcodes): Further rearrangements.
1236 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1238 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1241 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1243 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1246 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1248 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1250 * mips16-opc.c: Added mips16 sdbbp.
1253 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1255 * v850-opc.c: Initialise processors field of v850_opcode structure.
1258 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1260 Merge changes from Martin Hunt:
1262 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1264 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1265 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1266 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1268 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1270 * d30v-dis.c (print_insn): First operand of d*i (delayed
1271 branch) instructions is relative.
1273 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1274 (d30v_operand_table): Add IMM6S3 type.
1275 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1277 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1278 and cmp instructions.
1280 * d30v-opc.c: Correct entries for repeat*, and sat*.
1281 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1282 types. Correct several formats.
1284 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1286 * d30v-opc.c (pre_defined_registers): Change control registers.
1288 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1289 SHORT_C2. Manual was incorrect.
1291 * d30v-dis.c (lookup_opcode): Return value now indicates
1292 if an opcode has a short and a long form. Used for deciding
1293 to append a ".s" or ".l".
1294 (print_insn): Append a ".s" to an instruction if it is
1295 the short form and ".l" if it is a long form. Do not append
1296 anything if the instruction has only one possible size.
1298 * d30v-opc.c: Change mulx2h to require an even register.
1299 New form: SHORT_A2; a SHORT_A form that needs an even
1300 register as the first operand.
1302 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1303 instruction was not being disassembled if there were an odd
1304 number of instructions.
1306 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1309 start-sanitize-v850e
1310 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1312 * v850-dis.c (disassemble): Improved display of register lists.
1315 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1317 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1318 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1319 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1320 fandnot1s, fandnot2s.
1322 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1324 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1326 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1328 * cgen-asm.c (cgen_parse_address): New argument resultp.
1329 All callers updated.
1330 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1332 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1334 * mn10200-dis.c (disassemble): PC relative instructions are
1335 relative to the next instruction, not the current instruction.
1337 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1339 * v850-dis.c (disassemble): Only signed extend values that are not
1340 returned by extract functions.
1341 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1343 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1345 * v850-opc.c: Update comments. Remove use of
1346 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1348 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1350 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1352 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1354 * configure: Rebuilt with latest devo autoconf for NT support.
1356 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1358 * v850-dis.c (disassemble): Use curly brace syntax for register
1361 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1362 where r0 is being used as a destination register.
1364 start-sanitize-v850e
1365 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1367 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1370 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1372 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
1373 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
1374 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
1375 Add insns to access SGR and DBR.
1376 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
1378 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1380 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1382 start-sanitize-v850e
1383 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1385 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1386 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1389 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1391 * configure (cgen_files): Add support for v850e target.
1392 * configure.in (cgen_files): Add support for v850e target.
1394 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1396 * configure (cgen_files): Add support for v850ea target.
1397 * configure.in (cgen_files): Add support for v850ea target.
1400 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1402 * configure.in (bfd_arc_arch): Add.
1403 * configure: Rebuild.
1404 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1405 * Makefile.in: Rebuild.
1406 * arc-dis.c, arc-opc.c: New files.
1407 * disassemble.c (ARCH_all): Define ARCH_arc.
1408 (disassembler): Add ARC support.
1410 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1412 start-sanitize-v850e
1413 * v850-dis.c (disassemble): Add support for v850EA instructions.
1415 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1416 (v850_opcodes): Add v850EA instructions.
1418 * v850-dis.c (disassemble): Add support for v850E instructions.
1420 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1421 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1422 insert_spe, extract_spe): New Functions.
1423 (v850_opcodes): Add v850E instructions.
1426 * v850-opc.c: Reorganised and re-layed out to improve readability
1429 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1431 * configure: Rebuild with autoconf 2.12.1.
1433 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1435 * aclocal.m4, configure: Rebuild with new automake patches.
1437 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1439 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1440 * acinclude.m4: Just include acinclude.m4 from BFD.
1441 * aclocal.m4, configure: Rebuild.
1443 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1445 * Makefile.am: New file, based on old Makefile.in.
1446 * acconfig.h: New file.
1447 * acinclude.m4: New file.
1448 * stamp-h.in: New file.
1449 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1450 Removed shared library handling; now handled by libtool. Replace
1451 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1452 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1453 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1454 handling in AC_OUTPUT.
1455 * dep-in.sed: Change .o to .lo.
1456 * Makefile.in: Now built with automake.
1457 * aclocal.m4: Now built with aclocal.
1458 * config.in, configure: Rebuild.
1460 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1462 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1464 start-sanitize-r5900
1465 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
1467 * mips-opc.c: Fix coding of mtsa.
1470 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1472 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1474 * sparc-dis.c (sorted_opcodes): New static local.
1475 (struct opcode_hash): `opcode' is pointer to const element.
1476 (build_hash): First arg is now table of sorted pointers.
1477 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1478 (compare_opcodes): Update.
1480 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1482 * cgen-opc.c: #include <ctype.h>.
1483 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1484 Handle case insensitive hashing.
1485 (hash_keyword_value): Change type of `value' to unsigned int.
1487 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1489 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1490 precision FP, mark it as such. Likewise for double precision
1491 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1493 start-sanitize-r5900
1494 (mips_builtin_opcodes): Remove non-existant r5900 instructions
1497 start-sanitize-r5900
1498 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
1500 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
1501 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
1504 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1506 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1508 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1509 nesting depth when all the macros are expanded.
1511 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1513 * sparc-opc.c: The fcmp v9a instructions take an integer register
1514 as a destination, not a floating point register. From Christian
1515 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1517 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1519 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1520 syntax. From Roman Hodek
1521 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1523 * i386-dis.c (twobyte_has_modrm): Fix pand.
1525 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1527 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1529 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1531 * arm-dis.c: Add prototypes for arm_decode_shift and
1534 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
1536 * mips-opc.c: Add r3900 insns.
1538 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
1540 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
1541 print delay slot instructions on the same line. When using a PC
1542 relative load, add a comment with the value being loaded if it can
1545 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
1547 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
1548 to pushS/popS for segment regs and byte constant so that
1549 pushw/popw printed when in 16 bit data mode.
1551 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
1552 print cbtw, cwtd in 16 bit data mode.
1553 * i386-dis.c (putop): extra case W to support above.
1555 * i386-dis.c (print_insn_x86): print addr32 prefix when given
1556 address size prefix in 16 bit address mode.
1558 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
1560 * sh-dis.c: Reindent. Rename local variable fprintf to
1563 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
1565 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
1567 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
1569 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
1571 * mips16-opc.c (mip16_opcodes): same.
1573 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
1575 * m68k-opc.c (moveb): Change $d to %d.
1577 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
1579 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
1580 (twobyte_has_modrm): Likewise.
1582 (OP_MMX, OP_EM, OP_MS): New static functions.
1584 * i386-dis.c: Revert patch of April 4. The output now matches
1587 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
1589 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
1592 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
1594 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
1596 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
1598 * Makefile.in (install): Depend upon installdirs.
1599 (installdirs): New target.
1601 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
1603 From Thomas Graichen <graichen@rzpd.de>:
1604 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
1605 * configure: Rebuild.
1607 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
1609 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
1610 Delete string{,s}.h support.
1612 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
1614 * cgen-asm.c (cgen_parse_operand_fn): New global.
1615 (cgen_parse_{{,un}signed_integer,address}): Update call to
1616 cgen_parse_operand_fn.
1617 (cgen_init_parse_operand): New function.
1618 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
1619 from cgen_asm_init_parse.
1620 (m32r_cgen_assemble_insn): New operand `errmsg'.
1621 Delete call to as_bad, return error message to caller.
1622 (m32r_cgen_asm_hash_keywords): #if 0 out.
1624 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1626 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
1628 [case 'J']: Fix typo in register name.
1630 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
1632 * configure.in: Substitute SHLIB_LIBS.
1633 * configure: Rebuild.
1634 * Makefile.in (SHLIB_LIBS): New variable.
1635 ($(SHLIB)): Use $(SHLIB_LIBS).
1637 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
1639 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
1641 * cgen-opc.c (hash_keyword_name): Improve algorithm.
1643 * disassemble.c (disassembler): Handle m32r.
1645 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
1647 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
1648 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
1649 * Makefile.in (CFILES): Add them.
1650 (ALL_MACHINES): Add them.
1651 (dependencies): Regenerate.
1652 * configure.in (cgen_files): New variable.
1653 (bfd_m32r_arch): Add entry.
1654 * configure: Regenerate.
1656 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
1658 * configure.in: Correct file names for bfd_mn10[23]00_arch.
1659 * configure: Rebuild.
1661 * Makefile.in: Rebuild dependencies.
1663 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
1665 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
1668 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
1670 * Branched binutils 2.8.
1672 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
1674 * m10200-dis.c: Rename from mn10200-dis.c.
1675 * m10200-opc.c: Rename from mn10200-opc.c.
1676 * m10300-dis.c: Rename from mn10300-dis.c
1677 * m10300-opc.c: Rename from mn10300-opc.c.
1678 * Makefile.in: Update accordingly.
1680 * mips16-opc.c: Add mul and dmul macros.
1682 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
1684 * makefile.vms: Update CFLAGS, add clean target.
1686 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
1688 * mips-opc.c: Add "wait". From Ralf Baechle
1689 <ralf@gnu.ai.mit.edu>.
1691 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
1692 * configure, config.in: Rebuild.
1693 * sysdep.h: Include <stdlib.h> if it exists.
1694 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
1696 * Makefile.in: Rebuild dependencies.
1698 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
1700 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
1701 Andrew Bray <andy@madhouse.demon.co.uk>.
1703 * mips-opc.c: Add cast when setting mips_opcodes.
1705 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
1707 * v850-dis.c (disassemble): Fix sign extension problem.
1708 * v850-opc.c (extract_d*): Fix sign extension problems to make
1709 disassembly calculate branch offsets correctly.
1711 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
1713 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
1715 * mips-opc.c: Add dctr and dctw.
1718 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1720 * d30v-dis.c (print_insn): Change the way signed constants
1723 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
1725 * Makefile.in (BFD_H): New variable.
1726 (HFILES): New variable.
1727 (CFILES): Add all C files.
1728 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
1729 Delete old dependencies, and build new ones.
1730 * dep-in.sed: New file.
1732 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1734 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
1736 start-sanitize-coldfire
1737 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
1739 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
1742 end-sanitize-coldfire
1743 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
1745 * mn10200-opc.c: Change "trap" to "syscall".
1746 * mn10300-opc.c: Add new "syscall" instruction.
1748 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
1750 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
1751 mulul insns on the coldfire.
1753 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
1755 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
1756 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
1757 (print_insn_little_arm): Likewise.
1759 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
1761 Based on patches from H.J. Lu <hjl@lucon.org>:
1762 * i386-dis.c (fetch_data): Add prototype.
1763 * m68k-dis.c (fetch_data): Add prototype.
1764 (dummy_print_address): Add prototype. Make static.
1765 * ppc-opc.c (valid_bo): Add prototype.
1766 * sparc-dis.c (build_hash_table): Add prototype.
1767 (is_delayed_branch, compute_arch_mask): Add prototypes.
1768 (print_insn_sparc): Make several local variables const.
1769 (compare_opcodes): Change arguments to const PTR. Add prototype.
1770 * sparc-opc.c (arg): Change name field to be const.
1771 (lookup_name, lookup_value): Add prototypes. Change table and
1772 name parameters to be const.
1773 (sparc_encode_asi): Change name parameter to be const.
1774 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
1775 (sparc_encode_sparclet_cpreg): Likewise.
1776 (sparc_decode_asi): Change return type to be const.
1777 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
1778 (sparc_decode_sparclet_cpreg): Likewise.
1780 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
1782 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
1783 Solaris doesn't like the combined options, and the -f is
1785 (stamp-tshlink, install): Likewise.
1787 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
1789 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
1792 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
1794 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
1796 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
1798 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
1801 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1803 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
1805 start-sanitize-tic80
1806 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
1808 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
1810 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
1812 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
1815 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1817 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
1818 floatformat_to_double to make portable.
1819 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
1822 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
1824 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
1825 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
1827 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1829 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
1830 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
1832 start-sanitize-tic80
1833 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
1835 * tic80-opc.c (LSI_SCALED): Renamed from this ...
1836 (OFF_SL_BR_SCALED): ... to this, and added the flag
1837 TIC80_OPERAND_BASEREL to the flags word.
1838 (tic80_opcodes): Replace all occurances of LSI_SCALED with
1842 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
1844 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
1845 Change mips_opcodes from const array to a pointer,
1846 and change bfd_mips_num_opcodes from const int to int,
1847 so that we can increase the size of the mips opcodes table
1850 start-sanitize-tic80
1851 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
1853 * tic80-opc.c (tic80_predefined_symbols): Revert change to
1854 store BITNUM values in the table in one's complement form
1855 to match behavior when assembler is given a raw numeric
1856 value for a BITNUM operand.
1857 * tic80-dis.c (print_operand_bitnum): Ditto.
1861 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1863 * d30v-opc.c: Removed references to FLAG_X.
1866 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
1868 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
1871 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1873 * Makefile.in: Added d30v object files.
1874 * configure: (bfd_d30v_arch) Rebuilt.
1875 * configure.in: (bfd_d30v_arch) Added new case.
1876 * d30v-dis.c: New file.
1877 * d30v-opc.c: New file.
1878 * disassemble.c (disassembler) Add entry for d30v.
1881 start-sanitize-tic80
1882 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
1884 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
1885 representations for the floating point BITNUM values.
1887 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
1889 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
1890 in the table in one's complement form, as they appear in the
1892 (tic80_symbol_to_value): Use macros to access predefined
1894 (tic80_value_to_symbol): Ditto.
1895 (tic80_next_predefined_symbol): New function.
1896 * tic80-dis.c (print_operand_bitnum): Remove code that did
1897 one's complement for BITNUM values.
1900 start-sanitize-r5900
1901 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
1903 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
1906 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
1908 * makefile.vms: Remove 8 bit characters. Update to latest
1911 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1913 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
1915 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
1917 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
1918 (IMM24_PCREL): Likewise.
1920 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
1922 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
1923 address for an extended PC relative instruction that is not a
1926 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1928 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
1931 start-sanitize-tic80
1932 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
1934 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
1935 (tic80_opcodes): Sort entries so that long immediate forms
1936 come after short immediate forms, making it easier for
1937 assembler to select the right one for a given operand.
1940 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
1942 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
1944 (print_insn_mips16): Likewise.
1946 start-sanitize-r5900
1947 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
1949 * mips-opc.c: add r5900.
1952 start-sanitize-tic80
1953 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
1955 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
1956 a symbol class that restricts translation to just that
1957 class (general register, condition code, etc).
1959 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
1961 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
1962 and REG_DEST_E for register operands that have to be
1963 an even numbered register. Add REG_FPA for operands that
1964 are one of the floating point accumulator registers.
1965 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
1966 (tic80_opcodes): Change entries that need even numbered
1967 register operands to use the new operand table entries.
1968 Add "or" entries that are identical to "or.tt" entries.
1971 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
1973 * mips16-opc.c: Add new cases of exit instruction for
1975 * mips-dis.c (print_mips16_insn_arg): Display floating point
1976 registers in operands of exit instruction. Print `$' before
1977 register names in operands of entry and exit instructions.
1979 start-sanitize-tic80
1980 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
1982 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
1983 pairs for all predefined symbols recognized by the assembler.
1984 Also used by the disassembling routines.
1985 (tic80_symbol_to_value): New function.
1986 (tic80_value_to_symbol): New function.
1987 * tic80-dis.c (print_operand_control_register,
1988 print_operand_condition_code, print_operand_bitnum):
1989 Remove private tables and use tic80_value_to_symbol function.
1992 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1994 * d10v-dis.c (print_operand): Change address printing
1995 to correctly handle PC wrapping. Fixes PR11490.
1997 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
1999 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2002 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2004 * mips-dis.c (print_insn_mips16): Set insn_info information.
2005 (print_mips16_insn_arg): Likewise.
2007 * mips-dis.c (print_insn_mips16): Better handling of an extend
2008 opcode followed by an instruction which can not be extended.
2010 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2012 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2013 coldfire moveb instruction to not allow an address register as
2014 destination. Although the documentation does not indicate that
2015 this is invalid, experiments uncovered unexpected behavior.
2016 Added a comment explaining the situation. Thanks to Andreas
2017 Schwab for pointing this out to me.
2019 start-sanitize-tic80
2020 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2022 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2023 entries are presorted so that entries with the same mnemonic are
2024 adjacent to each other in the table. Sort the entries for each
2025 instruction so that this is true.
2028 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2030 * m68k-dis.c: Include <libiberty.h>.
2031 (print_insn_m68k): Sort the opcode table on the most significant
2032 nibble of the opcode.
2034 start-sanitize-tic80
2035 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2037 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2038 "vsub", "vst", "xnor", and "xor" instructions.
2039 (V_a1): Renamed from V_a, msb of accumulator reg number.
2040 (V_a0): Add macro, lsb of accumulator reg number.
2042 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2044 * tic80-dis.c (print_insn_tic80): Broke excessively long
2045 function up into several smaller ones and arranged for
2046 the instruction printing function to be callable recursively
2047 to print vector instructions that have both a load and a
2048 math instruction packed into a single opcode.
2049 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2050 to explain why it comes after the other vector opcodes.
2053 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2055 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2056 move insns to handle immediate operands.
2058 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2060 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2061 fix operand mask in the "moveml" entries for the coldfire.
2063 start-sanitize-tic80
2064 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2066 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2067 New macros for building vector instruction opcodes.
2068 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2069 FMT_LI, which were unused. The field is now a flags field.
2070 Remove some opcodes that are possible, but illegal, such
2071 as long immediate instructions with doubles for immediate
2072 values. Add "vadd" and "vld" instructions.
2074 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2076 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2077 the order more logical. Move the shift alias instructions ("rotl",
2078 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2079 interspersed with the regular sr.x and sl.x instructions. Add
2080 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2081 "sub", "subu", "swcr", and "trap".
2083 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2085 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2086 (OFF_SL_PC): Renamed from OFF_SL.
2087 (OFF_SS_BR): New operand type for base relative operand.
2088 (OFF_SL_BR): New operand type for base relative operand.
2089 (REG_BASE): New operand type for base register operand.
2090 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2091 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2092 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2094 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2095 10 char field, padded with spaces on rhs, rather than a string
2096 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2097 than old TIC80_OPERAND_RELATIVE. Add support for new
2098 TIC80_OPERAND_BASEREL flag bit.
2100 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2102 * tic80-dis.c (print_insn_tic80): Print floating point operands
2104 * tic80-opc.c (SPFI): Add single precision floating point
2105 immediate operand type.
2106 (ROTATE): Add rotate operand type for shifts.
2107 (ENDMASK): Add for shifts.
2108 (n): Macro for the 'n' bit.
2109 (i): Macro for the 'i' bit.
2110 (PD): Macro for the 'PD' field.
2111 (P2): Macro for the 'P2' field.
2112 (P1): Macro for the 'P1' field.
2113 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2117 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2119 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2120 adding in current address for pc-relative operands.
2122 start-sanitize-tic80
2123 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2125 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2126 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2127 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2128 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2129 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2130 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2131 (REG_SCALED, LSI_SCALED): New operand types.
2132 (E): New macro for 'E' bit at bit 27.
2133 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2134 opcodes, including the various size flavors (b,h,w,d) for
2135 the direct load and store instructions.
2137 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2139 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2141 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2142 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2143 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2144 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2145 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2146 masks with "MASK_* & ~M_*" to get the M bit reset.
2147 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2149 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2151 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2152 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2153 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2155 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2156 CC, SICR, and LICR table entries.
2157 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2158 "bcnd", and "brcr" opcodes.
2161 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2163 * ppc-opc.c (powerpc_operands): Make comment match the
2164 actual fields (no shift field).
2165 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2166 start-sanitize-tic80
2167 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2168 partial implementation, work in progress.
2169 * tic80-opc.c (tic80_operands): Begin construction operands table.
2170 (tic80_opcodes): Continue populating opcodes table and start
2171 filling in the operand indices.
2172 (tic80_num_opcodes): Add this.
2175 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2177 * m68k-opc.c: Add #B case for moveq.
2179 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2181 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2182 before they are used.
2184 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2186 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2187 for "breakpoint" instruction.
2189 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2191 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2192 (dep): Use ALL_CFLAGS rather than CFLAGS.
2194 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2196 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2199 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2201 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2202 start-sanitize-tic80
2203 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2206 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2208 * mips16-opc.c: Add "abs".
2210 start-sanitize-tic80
2211 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2213 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2214 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2215 (disassembler): Add bfd_arch_tic80 support to set disassemble
2216 to print_insn_tic80.
2217 * tic80-dis.c (print_insn_tic80): Add stub.
2219 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2221 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2222 * configure: Regenerate with autoconf.
2223 * tic80-dis.c: Add file.
2224 * tic80-opc.c: Add file.
2227 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2229 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2231 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2233 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2234 (mn10200_opcodes): Use it for some logicals and btst insns.
2235 Add "break" and "trap" instructions.
2237 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2239 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2241 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2243 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2244 relative load or add now depends upon whether the instruction is
2247 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2249 * mn10200-dis.c: Finish writing disassembler.
2250 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2251 Fix mask for "jmp (an)".
2253 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2254 handle endianness issues for mn10300.
2256 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2258 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2260 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2261 instruction. Fix opcode field for "movb (imm24),dn".
2263 * mn10200-opc.c (mn10200_operands): Fix insertion position
2266 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2268 * mn10200-opc.c: Create mn10200 opcode table.
2269 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2270 but moving along nicely.
2272 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2274 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2276 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2278 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2279 specifiers for fmovem* instructions.
2281 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2283 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2285 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2287 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2290 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2292 * mn10300-opc.c: Add some comments explaining the various
2295 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2297 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2299 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2302 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2303 operand specifiers in fmovm* instructions.
2305 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2307 * ppc-opc.c (insert_li): Give an error if the offset has the two
2308 least significant bits set.
2310 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2312 * mips-dis.c (print_insn_mips16): Separate the instruction from
2313 the arguments with a tab, not a space.
2315 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2317 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2320 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2323 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2325 * configure: Rebuild with autoconf 2.12.
2327 Add support for mips16 (16 bit MIPS implementation):
2328 * mips16-opc.c: New file.
2329 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2330 (mips16_reg_names): New static array.
2331 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2332 after seeing a 16 bit symbol.
2333 (print_insn_little_mips): Likewise.
2334 (print_insn_mips16): New static function.
2335 (print_mips16_insn_arg): New static function.
2336 * mips-opc.c: Add jalx instruction.
2337 * Makefile.in (mips16-opc.o): New target.
2338 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2339 * configure: Rebuild.
2341 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2343 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2344 operand specifiers in *save, *restore and movem* instructions.
2346 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2349 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2350 register operands for immediate arithmetic, not, neg, negx, and
2351 set according to condition instructions.
2353 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2354 specifier of the effective-address operand in immediate forms of
2355 arithmetic instructions. The specifier for the immediate operand
2356 notes how and where the constant will be stored.
2358 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2360 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2363 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2366 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2368 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2370 * mn10300-dis.c (disassemble): Handle register lists.
2372 * mn10300-opc.c: Fix handling of register list operand for
2373 "call", "ret", and "rets" instructions.
2375 * mn10300-dis.c (disassemble): Print PC-relative and memory
2376 addresses symbolically if possible.
2377 * mn10300-opc.c: Distinguish between absolute memory addresses,
2378 pc-relative offsets & random immediates.
2380 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2382 (disassemble): Handle SPLIT and EXTENDED operands.
2384 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2386 * mn10300-dis.c: Rough cut at printing some operands.
2388 * mn10300-dis.c: Start working on disassembler support.
2389 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2391 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2393 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2395 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2397 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2399 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2401 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2402 register argument is calls and jmp instructions.
2404 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2406 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2407 getx operand. Fix opcode for mulqu imm,dn.
2409 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2411 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2412 in MN10300_OPERAND_SPLIT operands for how many bits
2413 appear in the basic insn word. Add IMM32_HIGH24,
2414 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2415 (mn10300_opcodes): Use new operands as needed.
2417 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2418 for bset, bclr, btst instructions.
2419 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2421 * mn10300-opc.c (mn10300_operands): Remove many redundant
2422 operands. Update opcode table as appropriate.
2423 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2424 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2426 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2428 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2429 operands (for indexed load/stores). Fix bitpos for DI
2430 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2431 few instructions that insert immediates/displacements in the
2432 middle of the instruction. Add IMM8E for 8 bit immediate in
2433 the extended part of an instruction.
2434 (mn10300_operands): Use new opcodes as appropriate.
2436 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2438 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2439 sequential so the assembler never parallelizes it with
2442 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2444 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2445 a data/address register that appears in register field 0
2446 and register field 1.
2447 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2449 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2451 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2452 standard disassembly.
2454 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2455 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2456 Recategorize PALcode instructions.
2458 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2460 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2462 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2464 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2465 there are no operand types.
2467 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2469 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2471 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2473 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2475 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2477 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2479 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2480 and sst.w instructions.
2482 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2485 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2487 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2490 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2492 * ppc-opc.c (PPCPWR2): Define.
2493 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2496 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2498 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2499 field for movhu instruction.
2501 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2502 cast value to "long" not "signed long" to keep hpux10
2505 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2507 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2510 * mn10300-opc.c (FMT*): Remove definitions.
2512 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2513 for shift-by-register opcodes.
2515 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2516 into [AD][MN][01] for encoding the position of the register
2519 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2521 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2522 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2524 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2526 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2527 Fix various typos. Add "PAREN" operand.
2528 (MEM, MEM2): Define.
2529 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2530 operands. Fix several typos.
2532 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2535 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2537 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2538 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2540 (mn10300_opcodes): Break opcode format out into its own field.
2541 Update many operand fields to deal with signed vs unsigned
2542 issues. Fix one or two typos in the "mov" instruction
2543 opcode, mask and/or operand fields.
2545 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2547 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2548 m68851 wasn't reset.
2550 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2552 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2553 all opcodes. Very rough cut at operands for all opcodes.
2555 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2558 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2560 * mn10200-opc.c, mn10300-opc.c: New files.
2561 * mn10200-dis.c, mn10300-dis.c: New files.
2562 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2563 * disassemble.c: Break mn10x00 support into 10200 and 10300
2565 * configure.in: Likewise.
2566 * configure: Rebuilt.
2568 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2570 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2572 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
2574 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2576 * disassemble (ARCH_mn10x00): Define.
2577 (disassembler): Handle bfd_arch_mn10x00.
2578 * configure.in: Recognize bfd_mn10x00_arch.
2579 * configure: Rebuilt.
2581 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
2583 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
2584 accordingly. Don't declare functions using op_rtn.
2586 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
2588 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
2589 params to be more standard.
2590 * (disassemble): Print absolute addresses and symbolic names for
2591 branch and jump targets.
2592 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
2594 * (v850_opcodes): Add breakpoint insn.
2596 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
2598 * m68k-opc.c: Move the fmovemx data register cases before the
2599 other cases, so that they get recognized before the data register
2600 does gets treated as a degenerate register list.
2602 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
2604 * mips-opc.c: Add a case for "div" and "divu" with two registers
2605 and a destination of $0.
2607 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
2609 * mips-dis.c (print_insn_arg): Add prototype.
2610 (_print_insn_mips): Ditto.
2612 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
2614 * mips-dis.c (print_insn_arg): Print condition code registers as
2617 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
2619 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
2621 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
2623 * v850-dis.c (disassemble): Make static. Provide prototype.
2625 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
2627 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
2630 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
2632 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
2633 ']' characters into the output stream.
2634 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
2635 Add "memop" field to all opcodes (for the disassembler).
2636 Reorder opcodes so that "nop" comes before "mov" and "jr"
2637 comes before "jarl".
2639 * v850-dis.c (print_insn_v850): Fix typo in last change.
2641 * v850-dis.c (print_insn_v850): Properly handle disassembling
2642 a two byte insn at the end of a memory region when the memory
2643 region's size is only two byte aligned.
2645 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
2647 * v850-dis.c (v850_reg_names): Define.
2648 (v850_sreg_names, v850_cc_names): Likewise.
2649 (disassemble): Very rough cut at printing operands (unformatted).
2651 * v850-opc.c (BOP_MASK): Fix.
2652 (v850_opcodes): Fix mask for jarl and jr.
2654 * v850-dis.c: New file. Skeleton for disassembler support.
2655 * Makefile.in Remove v850 references, they're not needed here.
2656 * configure.in: Add v850-dis.o when building v850 toolchains.
2657 * configure: Rebuilt.
2658 * disassemble.c (disassembler): Call v850 disassembler.
2660 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
2661 (insert_d8_6, extract_d8_6): New functions.
2662 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
2663 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
2665 (IF4A, IF4B): Use "D7" instead of "D7S".
2666 (IF4C, IF4D): Use "D8_7" instead of "D8".
2667 (IF4E, IF4F): New. Use "D8_6".
2668 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
2669 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
2671 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
2672 (v850_operands): Change D16 to D16_15, use special insert/extract
2673 routines. New new D16 that uses the generic insert/extract code.
2674 (IF7A, IF7B): Use D16_15.
2675 (IF7C, IF7D): New. Use D16.
2676 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
2678 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
2679 message. Issue an error if the branch offset is odd.
2681 * v850-opc.c: Add notes about needing special insert/extract
2682 for all the load/store insns, except "ld.b" and "st.b".
2684 * v850-opc.c (insert_d22, extract_d22): New functions.
2685 (v850_operands): Use insert_d22 and extract_d22 for
2687 (insert_d9): Fix range check.
2689 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2691 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
2692 and set bits field to D9 and D22 operands.
2694 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
2696 * v850-opc.c (v850_operands): Define SR2 operand.
2697 (v850_opcodes): "ldsr" uses R1,SR2.
2699 * v850-opc.c (v850_opcodes): Fix opcode specs for
2700 sld.w, sst.b, sst.h, sst.w, and nop.
2702 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
2704 * v850-opc.c (v850_opcodes): Add null opcode to mark the
2705 end of the opcode table.
2707 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2709 * d10v-opc.c (pre_defined_registers): Added register pairs,
2710 "r0-r1", "r2-r3", etc.
2712 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
2714 * v850-opc.c (v850_operands): Make I16 be a signed operand.
2715 Create I16U for an unsigned 16bit mmediate operand.
2716 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
2718 * v850-opc.c (v850_operands): Define EP operand.
2719 (IF4A, IF4B, IF4C, IF4D): Use EP.
2721 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
2722 with immediate operand, "movhi". Tweak "ldsr".
2724 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
2725 correct. Get sld.[bhw] and sst.[bhw] closer.
2727 * v850-opc.c (v850_operands): "not" is a two byte insn
2729 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
2731 * v850-opc.c (v850_operands): D16 inserts at offset 16!
2733 * v850-opc.c (two): Get order of words correct.
2735 * v850-opc.c (v850_operands): I16 inserts at offset 16!
2737 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
2738 register source and destination operands.
2739 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
2741 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
2742 same thinko in "trap" opcode.
2744 * v850-opc.c (v850_opcodes): Add initializer for size field
2747 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
2748 Add D8 for 8-bit unsigned field in short load/store insns.
2749 (IF4A, IF4D): These both need two registers.
2750 (IF4C, IF4D): Define. Use 8-bit unsigned field.
2751 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
2752 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
2753 for "ldsr" and "stsr".
2754 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
2757 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
2758 short store word (sst.w).
2760 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2762 * v850-opc.c (v850_operands): Added insert and extract fields,
2763 pointers to functions that handle unusual operand encodings.
2765 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
2767 * v850-opc.c (v850_opcodes): Enable "trap".
2769 * v850-opc.c (v850_opcodes): Fix order of displacement
2770 and register for "set1", "clr1", "not1", and "tst1".
2772 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
2774 * v850-opc.c (v850_operands): Add "B3" support.
2775 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
2778 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
2780 * v850-opc.c: Close unterminated comment.
2782 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2784 * v850-opc.c (v850_operands): Add flags field.
2785 (v850_opcodes): add move opcodes.
2787 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2789 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
2790 * configure: (bfd_v850v_arch) Add new case.
2791 * configure.in: (bfd_v850_arch) Add new case.
2792 * v850-opc.c: New file.
2794 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
2796 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
2798 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2800 * d10v-opc.c: Add additional information to the opcode
2801 table to help determinine which instructions can be done
2804 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
2806 * mpw-make.sed: Update editing of include pathnames to be
2809 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
2811 * arm-opc.h: Added "bx" instruction definition.
2813 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
2815 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
2817 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2819 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
2821 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2823 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
2825 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
2827 * makefile.vms: Update for alpha-opc changes.
2829 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
2831 * i386-dis.c (print_insn_i386): Actually return the correct value.
2832 (ONE, OP_ONE): #ifdef out; not used.
2834 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2836 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
2837 Changed subi operand type to treat 0 as 16.
2839 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
2841 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
2844 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
2846 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
2847 memory transfer instructions. Add new format string entries %h and %s.
2848 * arm-dis.c: (print_insn_arm): Provide decoding of the new
2851 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2853 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
2854 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
2856 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
2858 * alpha-dis.c (print_insn_alpha_osf): Remove.
2859 (print_insn_alpha_vms): Remove.
2860 (print_insn_alpha): Make globally visible. Chose the register
2861 names based on info->flavour.
2862 * disassemble.c: Always return print_insn_alpha for the alpha.
2864 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2866 * d10v-dis.c (dis_long): Handle unknown opcodes.
2868 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2870 * d10v-opc.c: Changes to support signed and unsigned numbers.
2871 All instructions with the same name that have long and short forms
2872 now end in ".l" or ".s". Divs added.
2873 * d10v-dis.c: Changes to support signed and unsigned numbers.
2875 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2877 * d10v-dis.c: Change all functions to use info->print_address_func.
2879 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2881 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
2882 move ccr/sr insns more strict so that the disassembler only
2883 selects them when the addressing mode is data register.
2885 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2886 * d10v-opc.c (pre_defined_registers): Declare.
2887 * d10v-dis.c (print_operand): Now uses pre_defined_registers
2888 to pick a better name for the registers.
2890 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
2892 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
2893 operands for fexpand and fpmerge. From Christian Kuehnke
2894 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
2896 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
2898 * alpha-dis.c (print_insn_alpha): No longer the user-visible
2899 print routine. Take new regnames and cpumask arguments.
2900 Kill the environment variable nonsense.
2901 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
2902 (print_insn_alpha_vms): New function. Do VMS style regnames.
2903 * disassemble.c (disassembler): Test bfd flavour to pick
2904 between OSF and VMS routines. Default to OSF.
2906 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
2908 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
2909 * configure: Rebuild.
2910 * Makefile.in (install): Use @INSTALL_SHLIB@.
2912 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2914 * configure: (bfd_d10v_arch) Add new case.
2915 * configure.in: (bfd_d10v_arch) Add new case.
2916 * d10v-dis.c: New file.
2917 * d10v-opc.c: New file.
2918 * disassemble.c (disassembler) Add entry for d10v.
2920 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2922 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
2923 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
2925 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
2927 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
2928 distinguish between variants of the instruction set.
2929 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
2930 distinguish between variants of the instruction set.
2932 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
2934 * i386-dis.c (print_insn_i8086): New routine to disassemble using
2935 the 8086 instruction set.
2936 * i386-dis.c: General cleanups. Make most things static. Add
2937 prototypes. Get rid of static variables aflags and dflags. Pass
2938 them as args (to almost everything).
2940 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
2942 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
2944 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
2946 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
2947 if the next arg is marked with SRC_IN_DST. Gross.
2949 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
2950 we're looking for and find EXR.
2952 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
2953 if we're looking for KBIT and we don't find it.
2955 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
2958 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
2959 3bit immediate operands.
2961 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
2963 * Released binutils 2.7.
2965 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
2966 <kkaempf@progis.ac-net.de>.
2968 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
2970 * alpha-opc.c: Correct second case of "mov" to use OPRL.
2972 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
2974 * sparc-dis.c (print_insn_sparclite): New routine to print
2975 sparclite instructions.
2977 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2979 * m68k-opc.c (m68k_opcodes): Add coldfire support.
2981 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
2983 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
2984 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
2985 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
2987 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2989 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
2990 Use autoconf-set values.
2991 (docdir, oldincludedir): Removed.
2992 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
2994 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
2996 * alpha-opc.c: New file.
2997 * alpha-opc.h: Remove.
2998 * alpha-dis.c: Complete rewrite to use new opcode table.
2999 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3000 * configure: Rebuild with autoconf 2.10.
3001 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3002 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3004 (alpha-opc.o): New target.
3006 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3008 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3009 Set imm_added_to_rs1 even if the source and destination register
3012 * sparc-opc.c: Add some two operand forms of the wr instruction.
3014 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3016 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3019 * disassemble.c (disassembler): Handle H8/S.
3020 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3022 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3024 * sparc-opc.c: Add beq/teq as aliases for be/te.
3026 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3027 <sergei@msil.sps.mot.com>.
3029 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3031 * makefile.vms: New file.
3033 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3035 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3037 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3040 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3042 * i386-dis.c (OP_OFF): Call append_prefix.
3044 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3046 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3047 unsigned long to silence a warning from the Solaris PowerPC
3050 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3052 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3054 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3056 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3058 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3059 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3060 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3061 cpush, cpusha, cpull sparclet insns.
3063 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3065 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3067 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3069 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3070 Set F_FLOAT on other floating point instructions.
3072 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3074 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3076 (powerpc_opcodes): Add 860/821 specific SPRs.
3078 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3080 * configure.in: Permit --enable-shared to specify a list of
3081 directories. Set and substitute BFD_PICLIST.
3082 * configure: Rebuild.
3083 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3084 uses. Set to @BFD_PICLIST@.
3086 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3088 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3089 not "abs", which may be needed for the absolute in something
3090 like btst #0,@10:8. Print L_3 immediates separately from other
3091 immediates. Change ABSMOV reference to ABS8MEM.
3093 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3095 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3096 (current_arch_mask): New static global.
3097 (compute_arch_mask): New static function.
3098 (print_insn_sparc): Delete sparc_v9_p. New static local
3099 current_mach. Resort opcode table if current_mach changes.
3100 Generalize "insn not supported" test.
3101 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3102 Delete test for v9/!v9.
3103 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3105 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3106 (brfcx): Renamed to FBRX.
3107 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3108 coprocessor mnemonics are not supported on the sparclet).
3109 (condf): Renamed to CONDF.
3110 (SLCBCC2): Delete F_ALIAS flag.
3112 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3114 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3115 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3117 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3119 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3120 that the shared library version number is set correctly.
3122 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3124 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3125 Miles Bader <miles@gnu.ai.mit.edu>.
3126 * configure: Rebuild.
3128 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3130 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3133 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3135 * configure: Rebuild with autoconf 2.8.
3137 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3139 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3140 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3142 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3144 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3145 since they appear as targets in Makefile.in.
3146 * configure: Rebuild.
3148 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3150 * mpw-make.sed: Edit out shared library support bits.
3152 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3154 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3155 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3156 (sparc_opcodes): Add sparclet insns.
3157 (sparclet_cpreg_table): New static local.
3158 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3159 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3161 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3163 * i386-dis.c (index16): New static variable.
3164 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3166 (OP_indirE): Return result of OP_E.
3167 (OP_E): Check for 16 bit addressing mode, and disassemble
3168 correctly. Optimised 32 bit case a little. Don't print
3169 "(base,index,scale)" when sib specifies only an offset.
3171 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3173 * configure.in: Set and substitute SHLIB_DEP.
3174 * configure: Rebuild.
3175 * Makefile.in (SHLIB_DEP): New variable.
3176 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3177 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3178 COMMON_SHLIB, add them to piclist with appropriate modifications.
3179 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3180 here: just use piclist.
3182 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3184 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3185 (print_insn_sparc): Rewrite v9/not-v9 tests.
3186 (compare_opcodes): Likewise.
3187 * sparc-opc.c (MASK_<ARCH>): Define.
3188 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3189 (sparclet,v6notv9): Define.
3190 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3191 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3193 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3195 * configure.in: Call AC_PROG_CC before configure.host.
3196 * configure: Rebuild.
3198 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3200 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3202 * i386-dis.c (onebyte_has_modrm): New static array.
3203 (twobyte_has_modrm): New static array.
3204 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3206 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3208 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3211 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3213 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3216 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3218 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3219 m68010up, not just m68020up | cpu32.
3221 * Makefile.in (SONAME): New variable.
3222 ($(SHLINK)): Make a link to the transformed name, as well.
3223 (stamp-tshlink): New target.
3224 (install): Skip stamp-tshlink during install.
3226 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3228 * configure.in: Call AC_ARG_PROGRAM.
3229 * configure: Rebuild.
3230 * Makefile.in (program_transform_name): New variable.
3231 (install): Transform library name before installing it.
3233 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3235 * i960-dis.c (mem): Add HX dcinva instruction.
3237 Support for building as a shared library, based on patches from
3238 Alan Modra <alan@spri.levels.unisa.edu.au>:
3239 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3240 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3241 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3242 * configure: Rebuild.
3243 * Makefile.in (ALLLIBS): New variable.
3244 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3245 (COMMON_SHLIB, SHLINK): New variables.
3246 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3247 (STAGESTUFF): Remove variable.
3248 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3249 (stamp-piclist, piclist): New targets.
3250 ($(SHLIB), $(SHLINK)): New targets.
3251 ($(OFILES)): Depend upon stamp-picdir.
3252 (disassemble.o): Build twice if PICFLAG is set.
3253 (MOSTLYCLEAN): Add pic/*.o.
3254 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3255 (distclean): Remove pic and stamp-picdir.
3256 (install): Install shared libraries.
3257 (stamp-picdir): New target.
3259 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3261 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3262 Print unknown instruction as "unknown", rather than in hex.
3264 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3266 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3268 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3270 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3272 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3274 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3275 when necessary. From Ulrich Drepper
3276 <drepper@myware.rz.uni-karlsruhe.de>.
3278 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3280 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3281 sparc_num_opcodes. Update architecture enum values.
3282 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3283 (sparc_opcode_lookup_arch): New function.
3284 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3285 (sparc_opcodes): Add v9a shutdown insn.
3287 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3289 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3290 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3292 (print_insn_sparc64): Deleted.
3293 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3296 * sparc-opc.c (architecture_pname): Add v9a.
3298 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3300 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3301 incorrectly defined as 0x16 when it should be 0x15.
3302 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3303 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3304 excb (exception barrier) which is defined in the Alpha
3305 Architecture Handbook version 2.
3306 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3307 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3308 disassembled as or, for example.
3310 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3312 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3313 (_print_insn_mips): Change i from int to unsigned int.
3315 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3317 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3318 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3320 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3322 * i386-dis.c: Added Pentium Pro instructions.
3324 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3326 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3329 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3331 * sh-opc.h (sh_nibble_type): Added REG_B.
3332 (sh_arg_type): Added A_REG_B.
3333 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3335 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3337 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3339 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3341 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3343 * Makefile.in (distclean): Remove stamp-h. From Ronald
3344 F. Guilmette <rfg@monkeys.com>.
3346 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3348 From David Mosberger-Tang <davidm@azstarnet.com>:
3349 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3352 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3354 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3355 (sh_table): Added many SH3 opcodes.
3356 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3358 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3360 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3361 (subco,subco.): Mark this PPC, not PPCCOM.
3363 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3365 * configure: Rebuild with autoconf 2.7.
3367 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3369 * configure: Rebuild with autoconf 2.6.
3371 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3373 * configure.in: Sort list of architectures. Accept but do nothing
3374 for alliant, convex, pyramid, romp, and tahoe.
3376 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3378 * a29k-dis.c (print_special): Change num to unsigned int.
3380 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3382 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3385 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3387 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3388 * configure: Rebuilt.
3390 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3392 * configure.in: Add case for bfd_i860_arch.
3393 * configure: Rebuild.
3395 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3397 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3398 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3399 (NEXTDOUBLE): Likewise.
3400 (print_insn_m68k): Don't match fmoveml if there is more than one
3401 register in the list.
3402 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3404 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3406 * m68k-opc.c: Use #W rather than #w.
3407 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3409 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3411 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3412 and likewise for all the dbxx opcodes.
3414 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3416 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3418 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3420 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3421 the VR4100 specific instructions to the mips_opcodes structure.
3423 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3425 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3426 ugly Metrowerks bug in CW6, is fixed in CW7.
3428 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3430 * ppc-opc.c (whole file): Add flags for common/any support.
3432 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3434 * Makefile.in (BISON): Remove macro.
3435 (FLAGS_TO_PASS): Remove BISON.
3437 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3439 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3441 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3442 instructions that take no args by looking at the match mask.
3443 (print_insn_arg): Always print "%" before register names.
3444 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3445 [case '_']: Don't print "@#" before address.
3446 [case 'J']: Use "%s" as format string, not register name.
3447 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3449 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3451 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3454 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3456 From David Mosberger-Tang <davidm@azstarnet.com>
3458 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3459 (alpha_insn_set): added definitions for VAX floating point
3460 instructions (Unix compilers don't generate these, but handcoded
3461 assembly might still use them).
3463 * alpha-dis.c (print_insn_alpha): added support for disassembling
3464 the miscellaneous instructions in the Alpha instruction set.
3466 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3468 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3469 no longer create sysdep.h, sed ppc-opc.c to work around a
3470 serious Metrowerks C bug.
3471 * mpw-make.in: Remove.
3472 * mpw-make.sed: New file, used by mpw-configure to edit
3473 Makefile.in into an MPW makefile.
3475 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3477 * Makefile.in (maintainer-clean): New synonym for realclean.
3479 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3481 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3482 which use '0', '1', and '2' instead. Specify the proper size for
3483 a pmove immediate operand. Correct the pmovefd patterns to be
3484 moves to a register, not from a register.
3485 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3487 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3489 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3490 %psr, %wim, %tbr as F_NOTV9.
3492 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3494 * Makefile.in (Makefile): Just rebuild Makefile when running
3496 (config.h, stamp-h): New targets.
3497 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3498 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3499 rebuilding config.h.
3500 * configure: Rebuild.
3502 * mips-opc.c: Change unaligned loads and stores with "t,A"
3503 operands to use "t,A(b)".
3505 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3507 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3509 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3511 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3512 until 3 instead of until 2.
3514 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3516 * Makefile.in (ALL_CFLAGS): Define.
3517 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3518 (MOSTLYCLEAN): Add config.log.
3519 (distclean): Don't remove config.log.
3520 * configure.in: Substitute HDEFINES.
3521 * configure: Rebuild.
3523 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3525 * sh-opc.h (sh_arg_type): Add F_FR0.
3526 (sh_table, case fmac): Add F_FR0 as first argument.
3528 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3530 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3532 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3534 * sparc-dis.c: Remove all references to NO_V9.
3536 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3538 * aclocal.m4: Just include ../bfd/aclocal.m4.
3539 * configure: Rebuild.
3541 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3543 * sparc-dis.c (X_DISP19): Define.
3544 (print_insn, case 'G'): Use it.
3545 (print_insn, case 'L'): Sign extend displacement.
3547 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3549 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3550 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3551 host_makefile_frag or frags.
3552 * aclocal.m4: New file.
3553 * configure: Rebuild.
3554 * Makefile.in (INSTALL): Set to @INSTALL@.
3555 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3556 (INSTALL_DATA): Set to @INSTALL_DATA@.
3558 (AR_FLAGS): Set to rc rather than qc.
3559 (CC): Define as @CC@.
3560 (CFLAGS): Set to @CFLAGS@.
3561 (@host_makefile_frag@): Remove.
3562 (config.status): Remove dependency upon @frags@.
3564 * configure.in: ../bfd/config.bfd now just sets shell variables.
3565 Use them rather than looking through target Makefile fragments.
3566 * configure: Rebuild.
3568 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3570 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3572 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
3574 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3575 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3578 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3579 (lookup_{name,value}): New functions.
3580 (prefetch_table): New static local.
3581 (sparc_{encode,decode}_prefetch): New functions.
3582 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3584 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3586 * sh-opc.h: Add blank lines to improve readabililty of sh3e
3589 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3591 * sh-dis.c: Correct comment on first line of file.
3593 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
3595 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
3597 * sparc-opc.c (asi, membar): New static locals.
3598 (sparc_{encode,decode}_{asi,membar}): New functions.
3599 (sparc_opcodes, membar insn): Fix.
3600 * sparc-dis.c (print_insn): Call sparc_decode_asi.
3601 Support decoding of membar masks.
3604 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
3606 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
3608 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
3610 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
3611 and likewise for the other branches. Add bhs as an alias for bcc,
3612 and likewise for the size variants. Add dbhs as an alias for
3615 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
3617 * sh-opc.h (FP sts instructions): Update to match reality.
3619 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
3621 * m68k-dis.c: (fpcr_names): Add % before all register names.
3622 (reg_names): Likewise.
3623 (print_insn_arg): Don't explicitly print % before register names.
3624 Add % before register names in static array names. In case 'r',
3625 print data registers as `@(Dn)', not `Dn@'. When printing a
3626 memory address, don't print @# before it.
3627 (print_indexed): Change base_disp and outer_disp from int to
3628 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
3629 syntax. Sign extend 8 byte displacement correctly.
3630 (print_base): Print using MIT syntax. Print zpc when appropriate.
3631 Change parameter disp from int to bfd_vma.
3633 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
3636 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
3638 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
3639 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
3640 * sh-opc.h (sh_arg_type): Add new operand types.
3641 (sh_table): Add new opcodes from SH3E Floating Point ISA.
3643 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3645 * Makefile.in (distclean): Remove generated file config.h.
3647 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3649 * Makefile.in (distclean): Remove generated file config.h.
3651 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
3653 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
3655 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
3657 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
3658 rather than numopcodes. Use m68k_opcodes rather than removed
3659 opcode function. Don't check F_ALIAS.
3660 (print_insn_arg): Change first parameter to be const char *.
3661 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
3662 (m68k-opc.o): New target.
3663 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
3664 * configure: Rebuild.
3666 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
3668 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
3669 (opcode_bits, opcode_hash_table): New variables.
3670 (opcodes_initialized): Renamed from opcodes_sorted.
3671 (build_hash_table): New function.
3672 (is_delayed_branch): Use hash table.
3673 (print_insn): Renamed from print_insn_sparc, made static.
3674 Build and use hash table. If !sparc64, ignore sparc64 insns,
3675 and vice-versa if sparc64.
3676 (print_insn_sparc, print_insn_sparc64): New functions.
3677 (compare_opcodes): Move sparc64 opcodes to end.
3678 Print commutative insns with constant second.
3679 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
3681 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
3683 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
3684 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
3685 avoids printing a delay slot in a delay slot.
3686 * sh-opc.h (sh_table): Fully bracket last entry.
3688 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
3690 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
3692 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
3694 * configure.in: Get host_makefile_frag from ${srcdir}.
3696 * configure.in: Autoconfiscated. Check for string[s].h. Create
3697 config.h from config.in. Don't set up sysdep.h link.
3698 * sysdep.h: New file.
3699 * configure, config.in: New files, generated from configure.in.
3700 * Makefile.in: Updated to be processed autoconf-style.
3701 (distclean): Keep sysdep.h. Remove config.log and config.cache.
3702 (Makefile): Depend on config.status.
3703 (config.status): New rule.
3704 * configure.bat: Update Makefile substitutions.
3706 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
3708 * mips-opc.c (L1): Define.
3709 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
3710 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
3713 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
3715 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
3716 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
3717 have multiple add units but only a single logical unit.
3719 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
3720 shifted by 18, without any insertion or extraction function.
3721 (insert_cr, extract_cr): Remove.
3723 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3725 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
3728 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
3730 * mpw-config.in: Add sh and i386 configs, remove sparc config.
3731 * sh-opc.h: Add copyright.
3733 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
3735 * Makefile.in (crunch-m68k): Delete extra target accidentally
3736 checked in a while ago.
3738 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3740 * sh-opc.h (sh_table): Add SH3 support.
3742 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
3744 * sh-opc.h: Added bsrf and braf.
3746 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
3748 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
3749 bogus [ls]fm{ea,fd} patterns.
3751 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
3752 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
3753 initialize it from memory. Make function static.
3754 (print_insn_{big,little}_arm): New functions.
3755 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
3756 the correct endianness.
3758 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
3760 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
3763 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3765 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
3766 17th, so that it builds again using GCC as the compiler.
3768 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3770 * mips-dis.c (print_insn_little_mips): Cast return value from
3771 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
3772 expects an unsigned long, and that might be fewer words of
3773 argument storage (e.g., if bfd_vma is long long on a 32-bit
3775 (print_insn_big_mips): Likewise with bfd_getb32 value.
3776 (_print_insn_mips): Now static.
3778 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
3780 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
3781 gcc memory hog problem with initializer is fixed.
3783 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
3785 Merge in support for Mac MPW as a host.
3786 (Old change descriptions retained for informational value.)
3788 * mpw-config.in (archname): Compute from the config.
3789 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
3791 * mpw-config.in (target_arch): Compute from canonical target.
3792 (m68k, mips, powerpc, sparc): Add architectures.
3793 * mpw-make.in (disassemble.c.o): Add.
3794 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
3796 * mpw-config.in (BFD_MACHINES): Set to a default value.
3797 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
3799 * mpw-make.in (CSEARCH): Add extra-include to search path.
3801 * mpw-config.in (varargs.h): Don't create.
3802 (sysdep.h): Create using forward-include.
3803 * mpw-make.in (CSEARCH): Add include/mpw to search path.
3805 * mpw-config.in: New file, MPW version of configure.in.
3806 * mpw-make.in: New file, MPW version of Makefile.in.
3808 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3810 * alpha-dis.c (print_insn_alpha): Put empty statement after
3813 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
3815 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
3816 (low_sign_extend): Likewise.
3817 (get_field): Delete unused function.
3818 (set_field, deposit_14, deposit_21): Likewise.
3820 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3822 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
3825 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
3827 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
3829 * alpha-opc.h (OSF_ASMCODE): define
3830 print pal-code names as defined in App C of the
3831 Alpha Architecture Reference Manual
3833 * alpha-dis.c: cleaned up output
3834 print stylized code forms as defined in App A.4.3 of the
3835 Alpha Architecture Reference Manual
3837 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
3839 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
3841 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
3844 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3846 * m68k-dis.c (opcode): New function. Returns address of opcode
3847 table entry given index, even if the opcode table was split to
3848 work around gcc bugs.
3849 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
3851 (BREAK_UP_BIG_DECL): Make secondary array static and const.
3852 (reg_names): Now const.
3853 (print_insn_arg): Arrays cacheFieldName and names now const.
3854 (print_indexed): Array scales now const.
3856 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
3858 * ppc-opc.c: Sort recently added instructions by minor opcode
3859 number within major opcode number.
3861 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
3863 * hppa-dis.c: Include libhppa.h.
3865 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
3867 * mips-opc.c: Change dli to use M_DLI, and add dla.
3869 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3871 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
3873 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
3875 * mips-opc.c: Add r4650 mul instruction.
3877 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
3879 * mips-opc.c: Add uld and usd macros for unaligned double load and
3882 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3884 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
3885 mfdcr, mtdcr, icbt, iccci.
3887 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
3889 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
3890 signed char fields to shorts, more portable.
3892 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
3894 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
3895 char fields as signed chars, since they may have negative values.
3897 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3899 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
3900 (mycroft@netbsd.org).
3902 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
3904 From "Logg, Ed" <elogg@ea.com>:
3905 * ppc-opc.c (extract_bdm): Correct parenthezisation.
3906 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
3909 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
3911 * ppc-opc.c: Changes based on patch from David Edelsohn
3912 <edelsohn@mhpcc.edu>.
3913 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
3916 (insert_tbr): New static function.
3917 (extract_tbr): New static function.
3918 (XFXFXM_MASK, XFXM): Define.
3919 (XSPRBAT_MASK, XSPRG_MASK): Define.
3920 (powerpc_opcodes): Add instructions to access special registers by
3921 name. Add mtcr and mftbu.
3923 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
3925 * mips-opc.c (P3): Define.
3926 (mips_opcodes): Add mad and madu.
3928 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
3930 * configure.in: Add W65 support.
3931 * disassemble.c: Likewise.
3932 * w65-opc.h, w65-dis.c: New files.
3934 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
3936 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
3939 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3941 * mips-opc.c: Add dli as a synonym for li.
3943 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
3945 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
3946 print something for reserved opcode values, even if it won't
3949 * mips-dis.c (_print_insn_mips): When initializing, shift right
3950 and mask, to avoid sign extension problems on the Alpha.
3952 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
3955 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
3957 * sh-opc.h (mov.l gbr): Get direction right.
3958 * sh-dis.c (print_insn_shx): New function.
3959 (print_insn_shl, print_insn_sh): Call print_insn_shx to
3960 print opcodes with right byte order.
3962 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
3964 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
3965 to avoid conflicts with getopt.
3967 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3969 * hppa-dis.c (print_insn_hppa): Read the instruction using
3970 bfd_getb32, so that it works on a little endian or 64 bit host.
3971 Remove unused local variable op.
3973 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3975 * mips-opc.c: Use or instead of addu for pseudo-op move, since
3976 addu does not work correctly if -mips3.
3978 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3980 * a29k-dis.c (print_special): Add special register names defined
3981 on 29030, 29040 and 29050.
3982 (print_insn): Handle new operand type 'I'.
3984 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3986 * Makefile.in (INSTALL): Use top level install.sh script.
3988 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3990 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
3991 that it works on a little endian host.
3993 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3995 * configure.in: Use ${config_shell} when running config.bfd.
3997 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3999 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4001 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4003 * a29k-dis.c (print_insn): Print the opcode.
4005 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4007 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4009 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4011 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4013 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4015 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4016 which store a value into memory.
4018 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4020 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4021 * arm-dis.c, arm-opc.h: New files.
4023 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4025 * Makefile.in (ns32k-dis.o): Add dependency.
4026 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4027 string, not as array of chars.
4029 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4031 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4033 * sparc-opc.c: Added sparclite extended FP operations, and
4034 versions of v9 impdep* instructions permitting specification of
4037 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4039 * i960-dis.c (reg_names): Now const.
4040 (struct sparse_tabent): New type, copied from array type in mem
4042 (ctrl): Local static array ctrl_tab now const.
4043 (cobr): Local static array cobr_tab now const.
4044 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4045 static variable mem_tab no longer explicitly initialized. Changed
4046 mem_init to const array of struct sparse_tabent.
4047 (reg): Local static variable reg_tab no longer explicitly
4048 initialized. Changed reg_init to const array of struct
4050 (ea): Local static array scale_tab now const.
4052 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4055 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4057 * configure.bat: the disassember needs to be enabled for
4058 "objdump -d" to work in djgpp.
4060 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4062 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4063 (invalid_float): Enabled general version, doesn't require running
4064 on ns32k host. Changed to take char* argument, and test for
4065 explicitly specified sizes, instead of using sizeof() on host CPU
4067 (INVALID_FLOAT): Cast first argument.
4068 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4069 list_P032, list_M032): Now const.
4070 (optlist, list_search): Made appropriate arguments now point to
4072 (print_insn_arg): Changed static array of one-character-string
4073 pointers into a static const array of characters; fixed sprintf
4074 statement accordingly.
4076 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4078 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4079 from distribution. A ns32k-dis.c from a previous distribution has
4080 been brought up to date and supports the new interface.
4082 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4084 * configure.in: add bfd_ns32k_arch target support.
4086 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4087 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4089 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4091 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4094 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4096 * h8300-dis.c, mips-dis.c: Don't use true and false.
4098 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4100 * configure.in: Change --with-targets to --enable-targets.
4102 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4104 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4105 opcodes to the first instruction with that opcode, to speed
4106 disassembly of large files. From ralphc@pyramid.com (Ralph
4109 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4111 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4113 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4115 * configure.bat: update to latest makefile.in
4117 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4119 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4120 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4121 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4122 slot insn is in a delay slot.
4123 * z8k-opc.h: (resflg): Fix patterns.
4124 * h8500-opc.h Fix CR insn patterns.
4126 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4128 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4129 "cmpl" before POWER versions, so that gas -many uses them.
4131 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4133 * disassemble.c: New file.
4134 * Makefile.in (OFILES): Add disassemble.o.
4135 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4136 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4137 binutils/configure.in.
4139 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4140 opcode being examined.
4142 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4144 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4145 (insert_ral, insert_ram, insert_ras): New functions.
4146 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4147 RAS for store with update.
4149 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4151 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4152 (edelsohn@npac.syr.edu).
4154 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4156 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4159 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4161 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4163 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4165 * ppc-opc.c (powerpc_operands): The signedp field has been
4166 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4167 instead. Add new operand SISIGNOPT.
4168 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4169 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4170 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4173 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4175 * i386-dis.c (struct private): Renamed to dis_private. `private'
4176 is a reserved word for dynix cc.
4178 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4180 * configure.in: Change error message to refer to bfd/config.bfd
4181 rather than bfd/configure.in.
4183 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4185 * ppc-opc.c: Define POWER2 as short alias flag.
4186 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4189 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4191 * i960-dis.c (print_insn_i960): Don't read a second word for
4192 opcodes 0, 1, 2 and 3.
4194 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4196 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4198 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4200 * m68881-ext.c: Removed; no longer used.
4201 * Makefile.in: Changed accordingly.
4203 * m68k-dis.c (ext_format_68881): Don't declare.
4204 (print_insn_m68k): If an instruction uses place 'i', it uses at
4205 least four fixed bytes.
4206 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4207 extended float, convert to double using floatformat_to_double, not
4208 ieee_extended_to_double, and fetch the data before converting it.
4210 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4212 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4213 davidj@ICSI.Berkeley.EDU (David Johnson).
4215 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4217 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4218 PowerPC uses bdnz[l][a].
4220 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4222 * dis-buf.c, i386-dis.c: Include sysdep.h.
4224 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4226 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4228 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4229 by Motorola PowerPC 601 with PPC_OPCODE_601.
4230 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4231 Disassemble Motorola PowerPC 601 instructions as well as normal
4232 PowerPC instructions.
4234 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4236 * i960-dis.c (reg, mem): Just use a static array instead of
4239 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4241 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4242 condition name index if this is for a negated condition.
4244 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4245 Floating point format for 'H' operand is backwards from normal
4246 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4247 operands (fmpyadd and fmpysub), handle bizarre register
4248 translation correctly for single precision format.
4250 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4251 or 'I' operands if the next format specifier is 'M' (fcmp
4252 condition completer).
4254 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4256 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4257 single number giving a bitmask for the MB and ME fields of an M
4258 form instruction. Change NB to accept 32, and turn it into 0;
4259 also turn 0 into 32 when disassembling. Seperated SH from NB.
4260 (insert_mbe, extract_mbe): New functions.
4261 (insert_nb, extract_nb): New functions.
4262 (SC_MASK): Mask out SA and LK bits.
4263 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4264 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4265 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4266 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4267 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4268 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4269 (powerpc_macros): Define table of macro definitions.
4270 (powerpc_num_macros): Define.
4272 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4273 if PPC_OPERAND_NEXT is set.
4275 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4277 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4278 char. Retrieve contents using bfd_getl32 instead of shifting.
4280 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4282 * ppc-opc.c: New file. Opcode table for PowerPC, including
4283 opcodes for POWER (RS/6000).
4284 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4285 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4286 (CFILES): Add ppc-dis.c.
4287 (ppc-dis.o, ppc-opc.o): New targets.
4288 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4290 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4292 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4293 No space before 'u', 'f', or 'N'.
4295 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4297 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4298 farther than we should.
4300 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4302 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4304 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4306 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4308 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4309 needs it, to prevent reading past the end of a section.
4311 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4313 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4314 Removed t,A case for la; always use t,A(b) case.
4316 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4318 From Ted Lemen <mellon@pepper.ncd.com>
4319 * mips-dis.c (print_insn_arg): Handle 'k'.
4320 * mips-opc.c: Make cache use k, not t.
4322 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4324 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4325 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4326 FLOAT_FORMAT_CODE to put out floating point register names.
4328 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4330 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4332 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4334 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4336 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4338 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4339 larger than 32. Moved dsxx32 variants first for disassembler.
4341 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4343 * z8kgen.c, z8k-opc.h: Add full lda information.
4345 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4347 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4348 movb instructions. Any necessary space will be emitted by
4349 the code to handle nullification completers.
4351 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4353 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4355 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4357 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4358 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4360 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4362 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4364 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4366 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4367 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4369 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4371 * m88k-dis.c (m88kdis): comment change. Remove space after
4373 (printop): handle new arg types DEC and XREG for m88110.
4375 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4377 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4378 type for absolute branch addresses. Delete special
4379 "ble" and "be" code in 'W' operand code.
4381 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4383 * mips-opc.c: Set hazard information correctly for branch
4384 likely instructions.
4386 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4388 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4389 info->fprintf_func for printing and info->print_address_func for
4392 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4394 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4396 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4398 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4399 Corrected second case of "b" for disassembler.
4401 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4403 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4404 to BFD swapping routines to correspond to BFD name changes.
4406 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4408 * mips-opc.c: Change div machine instruction to be z,s,t rather
4409 than s,t. Change div macro to be d,v,t rather than d,s,t.
4410 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4411 rem and remu which generates only the corresponding div
4412 instruction. This is for compatibility with the MIPS assembler,
4413 which only generates the simple machine instruction when an
4414 explicit destination of $0 is used.
4415 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4417 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4419 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4420 WR_31 hazard for bal, bgezal, bltzal.
4422 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4424 * hppa-dis.c (print_insn_hppa): Use print function
4425 from within the disassemble_info, not fprintf_filtered.
4427 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4429 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4430 Law, law@cs.utah.edu.)
4432 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4434 * mips-opc.c ("absu"): Removed.
4437 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4439 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4440 Changed hazard information to distinguish between memory load
4441 delays and coprocessor load delays.
4443 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4445 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4447 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4449 * configure.in: Don't pass cpu to config.bfd.
4451 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4453 * m88k-dis.c (m88kdis): Make class unsigned.
4455 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4457 * alpha-dis.c (print_insn_alpha): One branch format case was
4458 missing the instruction name.
4460 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4462 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4463 Add the arch-specific auxiliary files.
4464 (OFILES): Remove the arch-specific auxiliary files
4465 and use BFD_MACHINES instead of DIS_LIBS.
4466 * configure.in: Set BFD_MACHINES based on --with-targets option.
4468 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4470 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4473 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4475 * sparc-opc.c: Change CONST to const to deal with gcc
4476 -Dconst=__const -traditional.
4478 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4480 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4481 coprocessor instructions out of #if 0, and made them use new
4484 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4486 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4488 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4490 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4491 instruction, for use by the disassembler.
4493 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4494 hand-coded sign extensions that depended on 32-bit host ints.
4495 FIXME, we still depend on big-endian host bitfield ordering.
4496 (sparc_print_insn): Set the insn_info_valid field, and the
4497 other fields that describe the instruction being printed.
4499 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4501 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4502 `jmp' instead of just one of them.
4504 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4506 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4507 (fput_fp_reg_r): Renamed from fput_reg_r.
4508 (fput_fp_reg): New function.
4509 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4511 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4513 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4515 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4517 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4519 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4520 don't output a space.
4522 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4524 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4526 * mips-opc.c: New file, containing opcode table from
4527 ../include/opcode/mips.h.
4528 * Makefile.in: Add it.
4530 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4532 * m88k-dis.c: New file, moved in from gdb and changed to use the
4533 new dis-asm.h disassembler interface.
4534 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4535 (m88k-dis.o): New target.
4537 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4539 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4540 argument string const char * to correspond to opcode/mips.h.
4542 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4544 * mips-dis.c: Updated to account for name changes in new version
4546 * Makefile.in: Added header file dependencies.
4548 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4550 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4552 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4554 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4555 extend, rather than shifts.
4557 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4559 * Makefile.in: Undo 15 June change.
4561 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4563 * m68k-dis.c (print_insn_arg): Change return value to byte count
4565 * m68k-dis.c: Re-write to detect invalid operands before
4566 printing anything, so we can handle this the same way we
4567 handle invalid opcodes.
4569 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4571 * sh-dis.c, sh-opc.h: Understand some more opcodes.
4573 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
4575 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4578 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4580 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4582 * configure.in: Do make sysdep.h link.
4583 * Makefile.in: Search ../include. Don't search ../bfd.
4585 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
4587 Changes from Jeff Law, law@cs.utah.edu:
4588 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
4589 Do not print a space before the completers specified by
4592 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
4594 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
4595 defined, since gdb has been fixed.
4597 Changes from Jeff Law, law@cs.utah.edu:
4598 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
4599 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
4600 be a *disassemble_info, not a *FILE.
4601 * hppa-dis.c: Support 'd', '!', and 'a'.
4602 * hppa-dis.c: Support 's' to extract a 2 bit space register.
4603 * hppa-dis.c: Delete cases which are no longer needed.
4605 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
4607 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
4609 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4611 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
4614 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
4616 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
4617 * configure.in: No longer need to configure to get sysdep.h.
4619 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
4621 * Patches from Jeffrey Law <law@cs.utah.edu>.
4622 * hppa-dis.c: Support 'I', 'J', and 'K' in output
4623 templates for 1.1 FP computational instructions.
4625 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4627 * h8500-dis.c (print_insn_h8500): Address argument is type
4629 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
4632 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
4633 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
4635 * sparc-dis.c (compare_opcodes): Move static declaration to
4638 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4640 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
4641 instruction, remove unimp hack from 'l' argument.
4643 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
4645 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
4648 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
4650 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
4651 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
4654 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4656 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
4657 arrays of string pointers to 2-d arrays of chars, to save
4660 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
4662 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
4663 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
4665 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4667 * hppa-dis.c: New file from Utah, adapted to new disassembler
4669 * Makefile.in: Include it.
4671 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4673 * sh-dis.c, sh-opc.h: New files.
4675 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4677 * alpha-dis.c, alpha-opc.h: New files.
4679 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4681 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
4684 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
4686 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
4688 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
4690 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
4693 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
4695 * sparc-dis.c: Use fprintf_func a few places where I forgot,
4696 and double percent signs a few places.
4698 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
4700 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
4701 Use info->print_address_func not print_address.
4703 * dis-buf.c (generic_print_address): New function.
4705 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4707 * Makefile.in: Add sparc-dis.c.
4708 sparc-dis.c: New file, merges binutils and gdb versions as follows:
4710 Add `add' instruction to the set that get checked
4711 for a preceding `sethi' in order to print an absolute address.
4712 * (print_insn): Disassembly prefers real instructions.
4713 (is_delayed_branch): Speed up.
4714 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
4715 Still missing some float ops, and needs testing.
4716 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
4717 F_ALIAS. Use printf, not fprintf, when not passing a file
4719 (compare_opcodes): Check that identical instructions have
4720 identical opcodes, complain otherwise.
4723 * Include reg_names.
4725 Use dis-asm.h/read_memory_func interface.
4727 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
4729 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
4730 deliberately return non-zero to setjmp from longjmp. Otherwise
4731 this code fails to compile.
4733 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
4735 * m68k-dis.c: Fix prototype for fetch_arg().
4737 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4739 * dis-buf.c: New file, for new read_memory_func interface.
4740 Makefile.in (OFILES): Include it.
4741 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
4742 Use new read_memory_func interface.
4744 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4746 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
4747 * h8500-opc.h: Fix couple of opcodes.
4749 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
4751 * Makefile.in: add dvi & installcheck targets
4753 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
4755 * Makefile.in: Update for h8500-dis.c.
4757 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4759 * h8500-dis.c, h8500-opc.h: New files
4761 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
4763 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
4764 ../include/dis-asm.h.
4765 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
4766 and ../gdb/m68k-pinsn.c).
4767 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
4768 and ../gdb/i386-pinsn.c).
4769 * m68881-ext.c: New file. Moved definition of
4770 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
4771 * Makefile.in: Adjust for new files.
4772 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
4773 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
4774 can be dis-assembled.
4776 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4778 * mips-dis.c (print_insn_arg): Now returns void.
4780 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
4782 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
4783 files that use the macros.
4785 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4787 * mips-dis.c: New file, from gdb/mips-pinsn.c.
4788 * Makefile.in (DIS_LIBS): Added mips-dis.o.
4789 (CFILES): Added mips-dis.c.
4791 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4793 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
4794 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
4796 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
4798 * Makefile.in: Improve *clean rules.
4799 * configure.in: Allow a default host.
4801 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4803 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
4804 files include other sysdep files
4806 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4808 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
4810 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
4812 * configure.in: For host support, use ../bfd/configure.host
4813 so it stays in sync with the ../bfd/hosts database.
4815 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4817 * configure.in: use cpu-vendor-os triple instead of nested cases
4819 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
4821 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
4822 *always* the wrong one.
4824 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4826 * z8kgen.c: added copyright info
4828 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4830 * z8k-dis.c (unparse_instr): prettier tabs
4831 * z8kgen.c -> z8k-opc.h: bug fixes in tables
4833 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
4835 * configure.in: Add ncr* configuration.
4836 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
4837 picayune ANSI compilers happy.
4839 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
4841 * configure.in (i386): Make i386 and i486 synonymous for now.
4842 * configure.in (i[34]86-*-sysv4): Add my_host definition.
4844 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
4846 * Makefile.in (install): Fix typo.
4848 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
4850 * Makefile.in (make): Remove obsolete crud.
4851 (sparc-opc.o): Avoid Sun Make VPATH bug.
4853 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
4855 * Makefile.in: since there are no SUBDIRS, remove rule and
4856 references of subdir_do.
4858 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
4860 * Makefile.in (install): Get the library name right here too.
4861 Don't install bfd.h, since it's unrelated to this library. No
4862 subdirs to recurse into, either.
4863 (CFILES): The source file has a .c suffix, not .o.
4865 * sparc-opc.c: New file, moved from BFD.
4866 * Makefile.in (OFILES): Build it.
4868 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
4870 * z8k-dis.c: fixed forward refferences of some declarations.
4872 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
4874 * Makefile.in: get the name of the library right
4876 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4878 * z8k-dis.c: knows how to disassemble z8k stuff
4879 * z8k-opc.h: new file full of z8000 opcodes
4883 version-control: never
projects / deliverable / binutils-gdb.git / blob