1 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
3 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
6 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
8 Add support for mips16 (16 bit MIPS implementation):
9 * mips16-opc.c: New file.
10 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
11 (mips16_reg_names): New static array.
12 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
13 after seeing a 16 bit symbol.
14 (print_insn_little_mips): Likewise.
15 (print_insn_mips16): New static function.
16 (print_mips16_insn_arg): New static function.
17 * mips-opc.c: Add jalx instruction.
18 * Makefile.in (mips16-opc.o): New target.
19 * configure.in: Use mips16-opc.o for bfd_mips_arch.
22 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
24 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
25 operand specifiers in *save, *restore and movem* instructions.
27 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
30 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
31 register operands for immediate arithmetic, not, neg, negx, and
32 set according to condition instructions.
34 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
35 specifier of the effective-address operand in immediate forms of
36 arithmetic instructions. The specifier for the immediate operand
37 notes how and where the constant will be stored.
39 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
41 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
44 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
47 * mn10300-dis.c (disassemble): Prefix registers with '%'.
49 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
51 * mn10300-dis.c (disassemble): Handle register lists.
53 * mn10300-opc.c: Fix handling of register list operand for
54 "call", "ret", and "rets" instructions.
56 * mn10300-dis.c (disassemble): Print PC-relative and memory
57 addresses symbolically if possible.
58 * mn10300-opc.c: Distinguish between absolute memory addresses,
59 pc-relative offsets & random immediates.
61 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
63 (disassemble): Handle SPLIT and EXTENDED operands.
65 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
67 * mn10300-dis.c: Rough cut at printing some operands.
69 * mn10300-dis.c: Start working on disassembler support.
70 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
72 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
74 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
77 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
79 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
82 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
84 * mn10300-opc.c (mn10300_opcodes): Demand parens around
85 register argument is calls and jmp instructions.
87 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
89 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
90 getx operand. Fix opcode for mulqu imm,dn.
92 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
94 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
95 in MN10300_OPERAND_SPLIT operands for how many bits
96 appear in the basic insn word. Add IMM32_HIGH24,
97 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
98 (mn10300_opcodes): Use new operands as needed.
100 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
101 for bset, bclr, btst instructions.
102 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
104 * mn10300-opc.c (mn10300_operands): Remove many redundant
105 operands. Update opcode table as appropriate.
106 (IMM32): Add MN10300_OPERAND_SPLIT flag.
107 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
109 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
111 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
112 operands (for indexed load/stores). Fix bitpos for DI
113 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
114 few instructions that insert immediates/displacements in the
115 middle of the instruction. Add IMM8E for 8 bit immediate in
116 the extended part of an instruction.
117 (mn10300_operands): Use new opcodes as appropriate.
120 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
122 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
123 sequential so the assembler never parallelizes it with
127 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
129 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
130 a data/address register that appears in register field 0
131 and register field 1.
132 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
134 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
136 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
137 standard disassembly.
139 * alpha-opc.c (alpha_operands): Rearrange flags slot.
140 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
141 Recategorize PALcode instructions.
144 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
146 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
149 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
151 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
152 there are no operand types.
155 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
157 * v850-opc.c (D9_RELAX): Renamed from D9, all references
159 (v850_operands): Make sure D22 immediately follows D9_RELAX.
162 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
164 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
167 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
169 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
170 and sst.w instructions.
172 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
176 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
178 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
181 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
183 * ppc-opc.c (PPCPWR2): Define.
184 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
187 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
189 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
190 field for movhu instruction.
193 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
194 cast value to "long" not "signed long" to keep hpux10
198 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
200 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
203 * mn10300-opc.c (FMT*): Remove definitions.
205 * mn10300-opc.c (mn10300_opcodes): Fix destination register
206 for shift-by-register opcodes.
208 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
209 into [AD][MN][01] for encoding the position of the register
212 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
214 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
215 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
217 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
219 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
220 Fix various typos. Add "PAREN" operand.
222 (mn10300_opcodes): Surround all memory addresses with "PAREN"
223 operands. Fix several typos.
225 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
228 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
230 * mn10300-opc.c (FMT_XX): Renumber starting at one.
231 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
233 (mn10300_opcodes): Break opcode format out into its own field.
234 Update many operand fields to deal with signed vs unsigned
235 issues. Fix one or two typos in the "mov" instruction
236 opcode, mask and/or operand fields.
238 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
240 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
243 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
245 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
246 all opcodes. Very rough cut at operands for all opcodes.
248 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
251 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
253 * mn10200-opc.c, mn10300-opc.c: New files.
254 * mn10200-dis.c, mn10300-dis.c: New files.
255 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
256 * disassemble.c: Break mn10x00 support into 10200 and 10300
258 * configure.in: Likewise.
259 * configure: Rebuilt.
261 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
263 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
265 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
267 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
269 * disassemble (ARCH_mn10x00): Define.
270 (disassembler): Handle bfd_arch_mn10x00.
271 * configure.in: Recognize bfd_mn10x00_arch.
272 * configure: Rebuilt.
274 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
276 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
277 accordingly. Don't declare functions using op_rtn.
280 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
282 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
283 params to be more standard.
284 * (disassemble): Print absolute addresses and symbolic names for
285 branch and jump targets.
286 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
288 * (v850_opcodes): Add breakpoint insn.
291 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
293 * m68k-opc.c: Move the fmovemx data register cases before the
294 other cases, so that they get recognized before the data register
295 does gets treated as a degenerate register list.
297 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
299 * mips-opc.c: Add a case for "div" and "divu" with two registers
300 and a destination of $0.
302 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
304 * mips-dis.c (print_insn_arg): Add prototype.
305 (_print_insn_mips): Ditto.
307 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
309 * mips-dis.c (print_insn_arg): Print condition code registers as
312 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
314 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
317 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
319 * v850-dis.c (disassemble): Make static. Provide prototype.
321 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
323 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
326 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
328 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
329 ']' characters into the output stream.
330 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
331 Add "memop" field to all opcodes (for the disassembler).
332 Reorder opcodes so that "nop" comes before "mov" and "jr"
335 * v850-dis.c (print_insn_v850): Fix typo in last change.
337 * v850-dis.c (print_insn_v850): Properly handle disassembling
338 a two byte insn at the end of a memory region when the memory
339 region's size is only two byte aligned.
341 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
343 * v850-dis.c (v850_reg_names): Define.
344 (v850_sreg_names, v850_cc_names): Likewise.
345 (disassemble): Very rough cut at printing operands (unformatted).
347 * v850-opc.c (BOP_MASK): Fix.
348 (v850_opcodes): Fix mask for jarl and jr.
350 * v850-dis.c: New file. Skeleton for disassembler support.
351 * Makefile.in Remove v850 references, they're not needed here
352 and they weren't being sanitized away.
353 * configure.in: Add v850-dis.o when building v850 toolchains.
354 * configure: Rebuilt.
355 * disassemble.c (disassembler): Call v850 disassembler.
357 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
358 (insert_d8_6, extract_d8_6): New functions.
359 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
360 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
362 (IF4A, IF4B): Use "D7" instead of "D7S".
363 (IF4C, IF4D): Use "D8_7" instead of "D8".
364 (IF4E, IF4F): New. Use "D8_6".
365 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
366 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
368 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
369 (v850_operands): Change D16 to D16_15, use special insert/extract
370 routines. New new D16 that uses the generic insert/extract code.
371 (IF7A, IF7B): Use D16_15.
372 (IF7C, IF7D): New. Use D16.
373 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
375 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
376 message. Issue an error if the branch offset is odd.
378 * v850-opc.c: Add notes about needing special insert/extract
379 for all the load/store insns, except "ld.b" and "st.b".
381 * v850-opc.c (insert_d22, extract_d22): New functions.
382 (v850_operands): Use insert_d22 and extract_d22 for
384 (insert_d9): Fix range check.
386 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
388 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
389 and set bits field to D9 and D22 operands.
391 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
393 * v850-opc.c (v850_operands): Define SR2 operand.
394 (v850_opcodes): "ldsr" uses R1,SR2.
396 * v850-opc.c (v850_opcodes): Fix opcode specs for
397 sld.w, sst.b, sst.h, sst.w, and nop.
399 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
401 * v850-opc.c (v850_opcodes): Add null opcode to mark the
402 end of the opcode table.
406 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
408 * d10v-opc.c (pre_defined_registers): Added register pairs,
409 "r0-r1", "r2-r3", etc.
413 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
415 * v850-opc.c (v850_operands): Make I16 be a signed operand.
416 Create I16U for an unsigned 16bit mmediate operand.
417 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
419 * v850-opc.c (v850_operands): Define EP operand.
420 (IF4A, IF4B, IF4C, IF4D): Use EP.
422 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
423 with immediate operand, "movhi". Tweak "ldsr".
425 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
426 correct. Get sld.[bhw] and sst.[bhw] closer.
428 * v850-opc.c (v850_operands): "not" is a two byte insn
430 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
432 * v850-opc.c (v850_operands): D16 inserts at offset 16!
434 * v850-opc.c (two): Get order of words correct.
436 * v850-opc.c (v850_operands): I16 inserts at offset 16!
438 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
439 register source and destination operands.
440 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
442 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
443 same thinko in "trap" opcode.
445 * v850-opc.c (v850_opcodes): Add initializer for size field
448 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
449 Add D8 for 8-bit unsigned field in short load/store insns.
450 (IF4A, IF4D): These both need two registers.
451 (IF4C, IF4D): Define. Use 8-bit unsigned field.
452 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
453 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
454 for "ldsr" and "stsr".
455 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
458 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
459 short store word (sst.w).
461 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
463 * v850-opc.c (v850_operands): Added insert and extract fields,
464 pointers to functions that handle unusual operand encodings.
466 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
468 * v850-opc.c (v850_opcodes): Enable "trap".
470 * v850-opc.c (v850_opcodes): Fix order of displacement
471 and register for "set1", "clr1", "not1", and "tst1".
473 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
475 * v850-opc.c (v850_operands): Add "B3" support.
476 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
479 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
481 * v850-opc.c: Close unterminated comment.
483 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
485 * v850-opc.c (v850_operands): Add flags field.
486 (v850_opcodes): add move opcodes.
488 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
490 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
491 * configure: (bfd_v850v_arch) Add new case.
492 * configure.in: (bfd_v850_arch) Add new case.
493 * v850-opc.c: New file.
496 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
498 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
501 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
503 * d10v-opc.c: Add additional information to the opcode
504 table to help determinine which instructions can be done
508 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
510 * mpw-make.sed: Update editing of include pathnames to be
513 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
515 * arm-opc.h: Added "bx" instruction definition.
517 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
519 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
522 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
524 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
526 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
528 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
531 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
533 * makefile.vms: Update for alpha-opc changes.
535 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
537 * i386-dis.c (print_insn_i386): Actually return the correct value.
538 (ONE, OP_ONE): #ifdef out; not used.
541 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
543 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
544 Changed subi operand type to treat 0 as 16.
547 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
549 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
552 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
554 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
555 memory transfer instructions. Add new format string entries %h and %s.
556 * arm-dis.c: (print_insn_arm): Provide decoding of the new
560 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
562 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
563 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
566 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
568 * alpha-dis.c (print_insn_alpha_osf): Remove.
569 (print_insn_alpha_vms): Remove.
570 (print_insn_alpha): Make globally visible. Chose the register
571 names based on info->flavour.
572 * disassemble.c: Always return print_insn_alpha for the alpha.
575 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
577 * d10v-dis.c (dis_long): Handle unknown opcodes.
579 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
581 * d10v-opc.c: Changes to support signed and unsigned numbers.
582 All instructions with the same name that have long and short forms
583 now end in ".l" or ".s". Divs added.
584 * d10v-dis.c: Changes to support signed and unsigned numbers.
586 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
588 * d10v-dis.c: Change all functions to use info->print_address_func.
591 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
593 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
594 move ccr/sr insns more strict so that the disassembler only
595 selects them when the addressing mode is data register.
598 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
599 * d10v-opc.c (pre_defined_registers): Declare.
600 * d10v-dis.c (print_operand): Now uses pre_defined_registers
601 to pick a better name for the registers.
604 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
606 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
607 operands for fexpand and fpmerge. From Christian Kuehnke
608 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
610 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
612 * alpha-dis.c (print_insn_alpha): No longer the user-visible
613 print routine. Take new regnames and cpumask arguments.
614 Kill the environment variable nonsense.
615 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
616 (print_insn_alpha_vms): New function. Do VMS style regnames.
617 * disassemble.c (disassembler): Test bfd flavour to pick
618 between OSF and VMS routines. Default to OSF.
620 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
622 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
623 * configure: Rebuild.
624 * Makefile.in (install): Use @INSTALL_SHLIB@.
627 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
629 * configure: (bfd_d10v_arch) Add new case.
630 * configure.in: (bfd_d10v_arch) Add new case.
631 * d10v-dis.c: New file.
632 * d10v-opc.c: New file.
633 * disassemble.c (disassembler) Add entry for d10v.
636 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
638 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
639 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
641 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
643 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
644 distinguish between variants of the instruction set.
645 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
646 distinguish between variants of the instruction set.
648 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
650 * i386-dis.c (print_insn_i8086): New routine to disassemble using
651 the 8086 instruction set.
652 * i386-dis.c: General cleanups. Make most things static. Add
653 prototypes. Get rid of static variables aflags and dflags. Pass
654 them as args (to almost everything).
656 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
658 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
660 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
662 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
663 if the next arg is marked with SRC_IN_DST. Gross.
665 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
666 we're looking for and find EXR.
668 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
669 if we're looking for KBIT and we don't find it.
671 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
674 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
675 3bit immediate operands.
677 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
679 * Released binutils 2.7.
681 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
682 <kkaempf@progis.ac-net.de>.
684 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
686 * alpha-opc.c: Correct second case of "mov" to use OPRL.
688 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
690 * sparc-dis.c (print_insn_sparclite): New routine to print
691 sparclite instructions.
693 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
695 * m68k-opc.c (m68k_opcodes): Add coldfire support.
697 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
699 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
700 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
701 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
703 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
705 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
706 Use autoconf-set values.
707 (docdir, oldincludedir): Removed.
708 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
710 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
712 * alpha-opc.c: New file.
713 * alpha-opc.h: Remove.
714 * alpha-dis.c: Complete rewrite to use new opcode table.
715 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
716 * configure: Rebuild with autoconf 2.10.
717 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
718 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
720 (alpha-opc.o): New target.
722 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
724 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
725 Set imm_added_to_rs1 even if the source and destination register
728 * sparc-opc.c: Add some two operand forms of the wr instruction.
730 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
732 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
735 * disassemble.c (disassembler): Handle H8/S.
736 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
738 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
740 * sparc-opc.c: Add beq/teq as aliases for be/te.
742 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
743 <sergei@msil.sps.mot.com>.
745 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
747 * makefile.vms: New file.
749 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
751 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
753 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
756 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
758 * i386-dis.c (OP_OFF): Call append_prefix.
760 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
762 * ppc-opc.c (instruction encoding macros): Add explicit casts to
763 unsigned long to silence a warning from the Solaris PowerPC
766 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
768 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
770 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
772 * sparc-dis.c (X_IMM,X_SIMM): New macros.
774 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
775 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
776 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
777 cpush, cpusha, cpull sparclet insns.
779 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
781 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
783 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
785 * sparc-opc.c: Set F_FBR on floating point branch instructions.
786 Set F_FLOAT on other floating point instructions.
788 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
790 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
792 (powerpc_opcodes): Add 860/821 specific SPRs.
794 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
796 * configure.in: Permit --enable-shared to specify a list of
797 directories. Set and substitute BFD_PICLIST.
798 * configure: Rebuild.
799 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
800 uses. Set to @BFD_PICLIST@.
802 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
804 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
805 not "abs", which may be needed for the absolute in something
806 like btst #0,@10:8. Print L_3 immediates separately from other
807 immediates. Change ABSMOV reference to ABS8MEM.
809 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
811 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
812 (current_arch_mask): New static global.
813 (compute_arch_mask): New static function.
814 (print_insn_sparc): Delete sparc_v9_p. New static local
815 current_mach. Resort opcode table if current_mach changes.
816 Generalize "insn not supported" test.
817 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
818 Delete test for v9/!v9.
819 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
821 (brfc): Split into CBR and FBR for coprocessor/fp branches.
822 (brfcx): Renamed to FBRX.
823 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
824 coprocessor mnemonics are not supported on the sparclet).
825 (condf): Renamed to CONDF.
826 (SLCBCC2): Delete F_ALIAS flag.
828 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
830 * sparc-opc.c (sparc_opcodes): rd must be 0 for
831 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
833 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
835 * Makefile.in (config.status): Depend upon BFD VERSION file, so
836 that the shared library version number is set correctly.
838 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
840 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
841 Miles Bader <miles@gnu.ai.mit.edu>.
842 * configure: Rebuild.
844 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
846 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
849 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
851 * configure: Rebuild with autoconf 2.8.
853 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
855 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
856 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
858 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
860 * configure.in: Don't set SHLIB or SHLINK to an empty string,
861 since they appear as targets in Makefile.in.
862 * configure: Rebuild.
864 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
866 * mpw-make.sed: Edit out shared library support bits.
868 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
870 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
871 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
872 (sparc_opcodes): Add sparclet insns.
873 (sparclet_cpreg_table): New static local.
874 (sparc_{encode,decode}_sparclet_cpreg): New functions.
875 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
877 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
879 * i386-dis.c (index16): New static variable.
880 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
882 (OP_indirE): Return result of OP_E.
883 (OP_E): Check for 16 bit addressing mode, and disassemble
884 correctly. Optimised 32 bit case a little. Don't print
885 "(base,index,scale)" when sib specifies only an offset.
887 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
889 * configure.in: Set and substitute SHLIB_DEP.
890 * configure: Rebuild.
891 * Makefile.in (SHLIB_DEP): New variable.
892 (LIBIBERTY_LISTS, BFD_LIST): New variables.
893 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
894 COMMON_SHLIB, add them to piclist with appropriate modifications.
895 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
896 here: just use piclist.
898 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
900 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
901 (print_insn_sparc): Rewrite v9/not-v9 tests.
902 (compare_opcodes): Likewise.
903 * sparc-opc.c (MASK_<ARCH>): Define.
904 (v6,v7,v8,sparclite,v9,v9a): Redefine.
905 (sparclet,v6notv9): Define.
906 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
907 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
909 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
911 * configure.in: Call AC_PROG_CC before configure.host.
912 * configure: Rebuild.
914 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
916 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
918 * i386-dis.c (onebyte_has_modrm): New static array.
919 (twobyte_has_modrm): New static array.
920 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
922 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
924 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
927 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
929 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
932 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
934 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
935 m68010up, not just m68020up | cpu32.
937 * Makefile.in (SONAME): New variable.
938 ($(SHLINK)): Make a link to the transformed name, as well.
939 (stamp-tshlink): New target.
940 (install): Skip stamp-tshlink during install.
942 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
944 * configure.in: Call AC_ARG_PROGRAM.
945 * configure: Rebuild.
946 * Makefile.in (program_transform_name): New variable.
947 (install): Transform library name before installing it.
949 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
951 * i960-dis.c (mem): Add HX dcinva instruction.
953 Support for building as a shared library, based on patches from
954 Alan Modra <alan@spri.levels.unisa.edu.au>:
955 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
956 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
957 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
958 * configure: Rebuild.
959 * Makefile.in (ALLLIBS): New variable.
960 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
961 (COMMON_SHLIB, SHLINK): New variables.
962 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
963 (STAGESTUFF): Remove variable.
964 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
965 (stamp-piclist, piclist): New targets.
966 ($(SHLIB), $(SHLINK)): New targets.
967 ($(OFILES)): Depend upon stamp-picdir.
968 (disassemble.o): Build twice if PICFLAG is set.
969 (MOSTLYCLEAN): Add pic/*.o.
970 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
971 (distclean): Remove pic and stamp-picdir.
972 (install): Install shared libraries.
973 (stamp-picdir): New target.
975 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
977 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
978 Print unknown instruction as "unknown", rather than in hex.
980 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
982 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
984 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
986 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
988 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
990 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
991 when necessary. From Ulrich Drepper
992 <drepper@myware.rz.uni-karlsruhe.de>.
994 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
996 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
997 sparc_num_opcodes. Update architecture enum values.
998 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
999 (sparc_opcode_lookup_arch): New function.
1000 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
1001 (sparc_opcodes): Add v9a shutdown insn.
1003 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
1005 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
1006 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
1008 (print_insn_sparc64): Deleted.
1009 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
1012 * sparc-opc.c (architecture_pname): Add v9a.
1014 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
1016 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
1017 incorrectly defined as 0x16 when it should be 0x15.
1018 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
1019 (alpha_insn_set): added cvtst and cvttq float ops. Also added
1020 excb (exception barrier) which is defined in the Alpha
1021 Architecture Handbook version 2.
1022 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
1023 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
1024 disassembled as or, for example.
1026 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
1028 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
1029 (_print_insn_mips): Change i from int to unsigned int.
1031 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
1033 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
1034 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
1036 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
1038 * i386-dis.c: Added Pentium Pro instructions.
1040 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1042 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
1045 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1047 * sh-opc.h (sh_nibble_type): Added REG_B.
1048 (sh_arg_type): Added A_REG_B.
1049 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
1051 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
1053 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
1055 * disassemble.c (disassembler): Use new bfd_big_endian macro.
1057 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
1059 * Makefile.in (distclean): Remove stamp-h. From Ronald
1060 F. Guilmette <rfg@monkeys.com>.
1062 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
1064 From David Mosberger-Tang <davidm@azstarnet.com>:
1065 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
1068 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1070 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
1071 (sh_table): Added many SH3 opcodes.
1072 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
1074 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1076 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
1077 (subco,subco.): Mark this PPC, not PPCCOM.
1079 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
1081 * configure: Rebuild with autoconf 2.7.
1083 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
1085 * configure: Rebuild with autoconf 2.6.
1087 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
1089 * configure.in: Sort list of architectures. Accept but do nothing
1090 for alliant, convex, pyramid, romp, and tahoe.
1092 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
1094 * a29k-dis.c (print_special): Change num to unsigned int.
1096 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
1098 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
1101 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
1103 * configure.in: Call AC_CHECK_PROG to find and cache AR.
1104 * configure: Rebuilt.
1106 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
1108 * configure.in: Add case for bfd_i860_arch.
1109 * configure: Rebuild.
1111 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
1113 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
1114 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
1115 (NEXTDOUBLE): Likewise.
1116 (print_insn_m68k): Don't match fmoveml if there is more than one
1117 register in the list.
1118 (print_insn_arg): Handle a place of '8' for a type of 'L'.
1120 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
1122 * m68k-opc.c: Use #W rather than #w.
1123 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
1125 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
1127 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
1128 and likewise for all the dbxx opcodes.
1130 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
1132 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
1134 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
1136 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
1137 the VR4100 specific instructions to the mips_opcodes structure.
1139 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
1141 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
1142 ugly Metrowerks bug in CW6, is fixed in CW7.
1144 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1146 * ppc-opc.c (whole file): Add flags for common/any support.
1148 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
1150 * Makefile.in (BISON): Remove macro.
1151 (FLAGS_TO_PASS): Remove BISON.
1153 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
1155 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1157 * m68k-dis.c (print_insn_m68k): Recognize all two-word
1158 instructions that take no args by looking at the match mask.
1159 (print_insn_arg): Always print "%" before register names.
1160 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
1161 [case '_']: Don't print "@#" before address.
1162 [case 'J']: Use "%s" as format string, not register name.
1163 [case 'B']: Treat place == 'C' like 'l' and 'L'.
1165 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
1167 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
1170 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
1172 From David Mosberger-Tang <davidm@azstarnet.com>
1174 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
1175 (alpha_insn_set): added definitions for VAX floating point
1176 instructions (Unix compilers don't generate these, but handcoded
1177 assembly might still use them).
1179 * alpha-dis.c (print_insn_alpha): added support for disassembling
1180 the miscellaneous instructions in the Alpha instruction set.
1182 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
1184 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
1185 no longer create sysdep.h, sed ppc-opc.c to work around a
1186 serious Metrowerks C bug.
1187 * mpw-make.in: Remove.
1188 * mpw-make.sed: New file, used by mpw-configure to edit
1189 Makefile.in into an MPW makefile.
1191 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
1193 * Makefile.in (maintainer-clean): New synonym for realclean.
1195 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
1197 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
1198 which use '0', '1', and '2' instead. Specify the proper size for
1199 a pmove immediate operand. Correct the pmovefd patterns to be
1200 moves to a register, not from a register.
1201 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
1203 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
1205 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
1206 %psr, %wim, %tbr as F_NOTV9.
1208 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
1210 * Makefile.in (Makefile): Just rebuild Makefile when running
1212 (config.h, stamp-h): New targets.
1213 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
1214 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
1215 rebuilding config.h.
1216 * configure: Rebuild.
1218 * mips-opc.c: Change unaligned loads and stores with "t,A"
1219 operands to use "t,A(b)".
1221 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1223 * sh-dis.c (print_insn_shx): Add F_FR0 support.
1225 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1227 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
1228 until 3 instead of until 2.
1230 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
1232 * Makefile.in (ALL_CFLAGS): Define.
1233 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
1234 (MOSTLYCLEAN): Add config.log.
1235 (distclean): Don't remove config.log.
1236 * configure.in: Substitute HDEFINES.
1237 * configure: Rebuild.
1239 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1241 * sh-opc.h (sh_arg_type): Add F_FR0.
1242 (sh_table, case fmac): Add F_FR0 as first argument.
1244 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1246 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
1248 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
1250 * sparc-dis.c: Remove all references to NO_V9.
1252 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
1254 * aclocal.m4: Just include ../bfd/aclocal.m4.
1255 * configure: Rebuild.
1257 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
1259 * sparc-dis.c (X_DISP19): Define.
1260 (print_insn, case 'G'): Use it.
1261 (print_insn, case 'L'): Sign extend displacement.
1263 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
1265 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
1266 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
1267 host_makefile_frag or frags.
1268 * aclocal.m4: New file.
1269 * configure: Rebuild.
1270 * Makefile.in (INSTALL): Set to @INSTALL@.
1271 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
1272 (INSTALL_DATA): Set to @INSTALL_DATA@.
1274 (AR_FLAGS): Set to rc rather than qc.
1275 (CC): Define as @CC@.
1276 (CFLAGS): Set to @CFLAGS@.
1277 (@host_makefile_frag@): Remove.
1278 (config.status): Remove dependency upon @frags@.
1280 * configure.in: ../bfd/config.bfd now just sets shell variables.
1281 Use them rather than looking through target Makefile fragments.
1282 * configure: Rebuild.
1284 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1286 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
1288 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
1290 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
1291 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
1294 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
1295 (lookup_{name,value}): New functions.
1296 (prefetch_table): New static local.
1297 (sparc_{encode,decode}_prefetch): New functions.
1298 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
1300 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1302 * sh-opc.h: Add blank lines to improve readabililty of sh3e
1305 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1307 * sh-dis.c: Correct comment on first line of file.
1309 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
1311 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
1313 * sparc-opc.c (asi, membar): New static locals.
1314 (sparc_{encode,decode}_{asi,membar}): New functions.
1315 (sparc_opcodes, membar insn): Fix.
1316 * sparc-dis.c (print_insn): Call sparc_decode_asi.
1317 Support decoding of membar masks.
1320 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
1322 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
1324 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
1326 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
1327 and likewise for the other branches. Add bhs as an alias for bcc,
1328 and likewise for the size variants. Add dbhs as an alias for
1331 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
1333 * sh-opc.h (FP sts instructions): Update to match reality.
1335 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
1337 * m68k-dis.c: (fpcr_names): Add % before all register names.
1338 (reg_names): Likewise.
1339 (print_insn_arg): Don't explicitly print % before register names.
1340 Add % before register names in static array names. In case 'r',
1341 print data registers as `@(Dn)', not `Dn@'. When printing a
1342 memory address, don't print @# before it.
1343 (print_indexed): Change base_disp and outer_disp from int to
1344 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
1345 syntax. Sign extend 8 byte displacement correctly.
1346 (print_base): Print using MIT syntax. Print zpc when appropriate.
1347 Change parameter disp from int to bfd_vma.
1349 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
1352 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
1354 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
1355 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
1356 * sh-opc.h (sh_arg_type): Add new operand types.
1357 (sh_table): Add new opcodes from SH3E Floating Point ISA.
1359 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1361 * Makefile.in (distclean): Remove generated file config.h.
1363 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1365 * Makefile.in (distclean): Remove generated file config.h.
1367 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
1369 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
1371 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
1373 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
1374 rather than numopcodes. Use m68k_opcodes rather than removed
1375 opcode function. Don't check F_ALIAS.
1376 (print_insn_arg): Change first parameter to be const char *.
1377 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
1378 (m68k-opc.o): New target.
1379 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
1380 * configure: Rebuild.
1382 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
1384 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
1385 (opcode_bits, opcode_hash_table): New variables.
1386 (opcodes_initialized): Renamed from opcodes_sorted.
1387 (build_hash_table): New function.
1388 (is_delayed_branch): Use hash table.
1389 (print_insn): Renamed from print_insn_sparc, made static.
1390 Build and use hash table. If !sparc64, ignore sparc64 insns,
1391 and vice-versa if sparc64.
1392 (print_insn_sparc, print_insn_sparc64): New functions.
1393 (compare_opcodes): Move sparc64 opcodes to end.
1394 Print commutative insns with constant second.
1395 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
1397 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
1399 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
1400 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
1401 avoids printing a delay slot in a delay slot.
1402 * sh-opc.h (sh_table): Fully bracket last entry.
1404 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
1406 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
1408 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
1410 * configure.in: Get host_makefile_frag from ${srcdir}.
1412 * configure.in: Autoconfiscated. Check for string[s].h. Create
1413 config.h from config.in. Don't set up sysdep.h link.
1414 * sysdep.h: New file.
1415 * configure, config.in: New files, generated from configure.in.
1416 * Makefile.in: Updated to be processed autoconf-style.
1417 (distclean): Keep sysdep.h. Remove config.log and config.cache.
1418 (Makefile): Depend on config.status.
1419 (config.status): New rule.
1420 * configure.bat: Update Makefile substitutions.
1422 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
1424 * mips-opc.c (L1): Define.
1425 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
1426 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
1429 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
1431 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
1432 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
1433 have multiple add units but only a single logical unit.
1435 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
1436 shifted by 18, without any insertion or extraction function.
1437 (insert_cr, extract_cr): Remove.
1440 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
1442 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
1445 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1447 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
1450 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
1452 * mpw-config.in: Add sh and i386 configs, remove sparc config.
1453 * sh-opc.h: Add copyright.
1455 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
1457 * Makefile.in (crunch-m68k): Delete extra target accidentally
1458 checked in a while ago.
1460 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1462 * sh-opc.h (sh_table): Add SH3 support.
1464 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
1466 * sh-opc.h: Added bsrf and braf.
1468 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
1470 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
1471 bogus [ls]fm{ea,fd} patterns.
1473 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
1474 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
1475 initialize it from memory. Make function static.
1476 (print_insn_{big,little}_arm): New functions.
1477 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
1478 the correct endianness.
1481 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
1483 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
1484 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
1487 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
1489 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
1492 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1494 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
1495 17th, so that it builds again using GCC as the compiler.
1497 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1499 * mips-dis.c (print_insn_little_mips): Cast return value from
1500 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
1501 expects an unsigned long, and that might be fewer words of
1502 argument storage (e.g., if bfd_vma is long long on a 32-bit
1504 (print_insn_big_mips): Likewise with bfd_getb32 value.
1505 (_print_insn_mips): Now static.
1507 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
1509 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
1510 gcc memory hog problem with initializer is fixed.
1513 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
1515 * arc-opc.c (NULL): Define.
1516 (arc_operands, insn fields u,s): Delete.
1517 (arc_operands, insn fields a,b,c): Mark as signed.
1518 (arc_opcodes): No longer const, links computed at run-time.
1519 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
1520 suffixes that affect the insn code.
1521 (arc_opcodes): Resort table to macros are first.
1522 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
1523 (arc_opcodes, st [b] entry): Likewise.
1524 (arc_opcodes, st [b,d] entry): Fix mask, value.
1525 (arc_reg_names): Add entries for r29, r30, r31, r60.
1526 (opcode_map, icode_map): New static globals.
1527 (arc_opcode_init_tables): Initialize them.
1528 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
1529 (insert_shimmoffset): Signal error if register present.
1531 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
1534 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
1536 Merge in support for Mac MPW as a host.
1537 (Old change descriptions retained for informational value.)
1539 * mpw-config.in (archname): Compute from the config.
1540 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
1542 * mpw-config.in (target_arch): Compute from canonical target.
1543 (m68k, mips, powerpc, sparc): Add architectures.
1544 * mpw-make.in (disassemble.c.o): Add.
1545 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
1547 * mpw-config.in (BFD_MACHINES): Set to a default value.
1548 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
1550 * mpw-make.in (CSEARCH): Add extra-include to search path.
1552 * mpw-config.in (varargs.h): Don't create.
1553 (sysdep.h): Create using forward-include.
1554 * mpw-make.in (CSEARCH): Add include/mpw to search path.
1556 * mpw-config.in: New file, MPW version of configure.in.
1557 * mpw-make.in: New file, MPW version of Makefile.in.
1560 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
1562 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
1563 Call arc_get_opcode_mach to map bfd mach number to opcode value.
1564 (print_insn_*): Pass bfd mach number, not opcode version.
1565 * arc-opc.c (arc_get_opcode_mach): New function.
1568 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1570 * alpha-dis.c (print_insn_alpha): Put empty statement after
1573 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
1575 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
1576 (low_sign_extend): Likewise.
1577 (get_field): Delete unused function.
1578 (set_field, deposit_14, deposit_21): Likewise.
1580 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1582 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
1585 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
1587 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
1589 * alpha-opc.h (OSF_ASMCODE): define
1590 print pal-code names as defined in App C of the
1591 Alpha Architecture Reference Manual
1593 * alpha-dis.c: cleaned up output
1594 print stylized code forms as defined in App A.4.3 of the
1595 Alpha Architecture Reference Manual
1597 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
1599 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
1601 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
1604 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1606 * m68k-dis.c (opcode): New function. Returns address of opcode
1607 table entry given index, even if the opcode table was split to
1608 work around gcc bugs.
1609 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
1611 (BREAK_UP_BIG_DECL): Make secondary array static and const.
1612 (reg_names): Now const.
1613 (print_insn_arg): Arrays cacheFieldName and names now const.
1614 (print_indexed): Array scales now const.
1617 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
1619 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
1620 (print_insn_arc_{host,graphics,audio}): Likewise.
1621 (print_insn): Add prototype.
1622 (arc_get_disassembler): New arg `big_p'. Return little or big
1623 print fn accordingly.
1624 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
1625 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
1626 (arc_opval_supported): Likewise.
1627 * disassemble.c (disassembler): Pass big endian flag to
1628 arc_get_disassembler.
1631 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
1633 * ppc-opc.c: Sort recently added instructions by minor opcode
1634 number within major opcode number.
1636 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
1638 * hppa-dis.c: Include libhppa.h.
1640 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
1642 * mips-opc.c: Change dli to use M_DLI, and add dla.
1644 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1646 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
1649 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
1651 * arc-dis.c (arc_get_disassembler): Change argument to int,
1652 one of bfd_mach_arc_xxx. All callers updated.
1655 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
1657 * mips-opc.c: Add r4650 mul instruction.
1659 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
1661 * mips-opc.c: Add uld and usd macros for unaligned double load and
1664 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1666 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
1667 mfdcr, mtdcr, icbt, iccci.
1670 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
1672 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
1673 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
1674 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
1675 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
1676 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
1677 (insert_absaddr): New function.
1679 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
1681 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
1682 New argument `cpu', pass it to arc_opcode_init_tables.
1683 Document byte order dependencies. Ignore unsupported insns.
1684 (arc_get_disassembler): New function.
1685 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
1686 print_insn_arc_audio): New functions.
1687 * arc-opc.c (MULTSHIFT operand): Delete.
1688 (UNSIGNED, SATURATION): New operands.
1689 (mac, mul, mul64, mulu64): New insns.
1690 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
1691 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
1692 (host,graphics,audio extended and auxiliary regs): Define.
1693 (ss, sc, mh, ml): New suffixes.
1694 (arc_opcode_supported, arc_opval_supported): New functions.
1695 (insert_multshift, extract_multshift): Deleted.
1696 * disassemble.c (disassembler, case bfd_arch_arc): Call
1697 arc_get_disassembler to get disassembler routine.
1700 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
1702 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
1703 signed char fields to shorts, more portable.
1705 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
1707 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
1708 char fields as signed chars, since they may have negative values.
1710 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1712 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
1713 (mycroft@netbsd.org).
1715 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
1717 From "Logg, Ed" <elogg@ea.com>:
1718 * ppc-opc.c (extract_bdm): Correct parenthezisation.
1719 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
1722 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
1724 * ppc-opc.c: Changes based on patch from David Edelsohn
1725 <edelsohn@mhpcc.edu>.
1726 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
1729 (insert_tbr): New static function.
1730 (extract_tbr): New static function.
1731 (XFXFXM_MASK, XFXM): Define.
1732 (XSPRBAT_MASK, XSPRG_MASK): Define.
1733 (powerpc_opcodes): Add instructions to access special registers by
1734 name. Add mtcr and mftbu.
1736 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
1738 * mips-opc.c (P3): Define.
1739 (mips_opcodes): Add mad and madu.
1741 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
1743 * configure.in: Add W65 support.
1744 * disassemble.c: Likewise.
1745 * w65-opc.h, w65-dis.c: New files.
1747 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1749 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
1753 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
1755 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
1757 * arc-opc.c (extract_reladdr): New function.
1758 (insert_reladdr): Store address right-shifted by 2.
1761 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1763 * mips-opc.c: Add dli as a synonym for li.
1766 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
1768 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
1770 (extraction fns): Insn argument now array of two words. Return pointer
1771 to value's table entry. All uses changed.
1772 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
1773 (insert_multshift, extract_multshift): New fns.
1774 (arc_operands): Add support for cache bypass suffix. Add support for
1775 predefined aux regs. Modifier bits moved to flags field.
1776 (arc_opcodes): Likewise.
1777 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
1778 New insn rlc. Update to syntax in programmer's manual.
1779 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
1780 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
1782 (arc_opcode_init_tables): New argument to indicate cpu type.
1783 (insert_reg): Handle predefined aux regs.
1784 (extract_reg): Likewise.
1785 (lookup_register): New fn.
1786 * arc-dis.c (arc_condition_codes): Deleted.
1787 (print_insn_arc): Handle insns with 32 bit immediate constants better.
1788 Clean up modifier handling. Handle predefined aux regs.
1791 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1793 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
1794 print something for reserved opcode values, even if it won't
1797 * mips-dis.c (_print_insn_mips): When initializing, shift right
1798 and mask, to avoid sign extension problems on the Alpha.
1800 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
1804 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
1806 * configure.in: Add ARC support.
1807 * disassemble.c: Likewise.
1808 * arc-dis.c, arc-opc.c: New files.
1811 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1813 * sh-opc.h (mov.l gbr): Get direction right.
1814 * sh-dis.c (print_insn_shx): New function.
1815 (print_insn_shl, print_insn_sh): Call print_insn_shx to
1816 print opcodes with right byte order.
1818 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1820 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
1821 to avoid conflicts with getopt.
1823 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1825 * hppa-dis.c (print_insn_hppa): Read the instruction using
1826 bfd_getb32, so that it works on a little endian or 64 bit host.
1827 Remove unused local variable op.
1829 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1831 * mips-opc.c: Use or instead of addu for pseudo-op move, since
1832 addu does not work correctly if -mips3.
1834 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1836 * a29k-dis.c (print_special): Add special register names defined
1837 on 29030, 29040 and 29050.
1838 (print_insn): Handle new operand type 'I'.
1840 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1842 * Makefile.in (INSTALL): Use top level install.sh script.
1844 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1846 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
1847 that it works on a little endian host.
1849 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1851 * configure.in: Use ${config_shell} when running config.bfd.
1853 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1855 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
1857 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1859 * a29k-dis.c (print_insn): Print the opcode.
1861 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1863 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
1865 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
1867 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
1869 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1871 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
1872 which store a value into memory.
1874 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
1876 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
1877 * arm-dis.c, arm-opc.h: New files.
1879 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
1881 * Makefile.in (ns32k-dis.o): Add dependency.
1882 * ns32k-dis.c (print_insn_arg): Declare initialized local as
1883 string, not as array of chars.
1885 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1887 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
1889 * sparc-opc.c: Added sparclite extended FP operations, and
1890 versions of v9 impdep* instructions permitting specification of
1893 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1895 * i960-dis.c (reg_names): Now const.
1896 (struct sparse_tabent): New type, copied from array type in mem
1898 (ctrl): Local static array ctrl_tab now const.
1899 (cobr): Local static array cobr_tab now const.
1900 (mem): Local variables reg1, reg2, reg3 now point to const. Local
1901 static variable mem_tab no longer explicitly initialized. Changed
1902 mem_init to const array of struct sparse_tabent.
1903 (reg): Local static variable reg_tab no longer explicitly
1904 initialized. Changed reg_init to const array of struct
1906 (ea): Local static array scale_tab now const.
1908 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
1911 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
1913 * configure.bat: the disassember needs to be enabled for
1914 "objdump -d" to work in djgpp.
1916 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1918 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
1919 (invalid_float): Enabled general version, doesn't require running
1920 on ns32k host. Changed to take char* argument, and test for
1921 explicitly specified sizes, instead of using sizeof() on host CPU
1923 (INVALID_FLOAT): Cast first argument.
1924 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
1925 list_P032, list_M032): Now const.
1926 (optlist, list_search): Made appropriate arguments now point to
1928 (print_insn_arg): Changed static array of one-character-string
1929 pointers into a static const array of characters; fixed sprintf
1930 statement accordingly.
1932 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
1934 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
1935 from distribution. A ns32k-dis.c from a previous distribution has
1936 been brought up to date and supports the new interface.
1938 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
1940 * configure.in: add bfd_ns32k_arch target support.
1942 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
1943 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
1945 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
1947 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
1950 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
1952 * h8300-dis.c, mips-dis.c: Don't use true and false.
1954 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
1956 * configure.in: Change --with-targets to --enable-targets.
1958 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1960 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
1961 opcodes to the first instruction with that opcode, to speed
1962 disassembly of large files. From ralphc@pyramid.com (Ralph
1965 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1967 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
1969 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
1971 * configure.bat: update to latest makefile.in
1973 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
1975 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
1976 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
1977 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
1978 slot insn is in a delay slot.
1979 * z8k-opc.h: (resflg): Fix patterns.
1980 * h8500-opc.h Fix CR insn patterns.
1982 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1984 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
1985 "cmpl" before POWER versions, so that gas -many uses them.
1987 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1989 * disassemble.c: New file.
1990 * Makefile.in (OFILES): Add disassemble.o.
1991 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
1992 * configure.in: Define ARCHDEFS in Makefile. Code taken from
1993 binutils/configure.in.
1995 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
1996 opcode being examined.
1998 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2000 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
2001 (insert_ral, insert_ram, insert_ras): New functions.
2002 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
2003 RAS for store with update.
2005 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2007 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
2008 (edelsohn@npac.syr.edu).
2010 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2012 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
2015 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
2017 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
2019 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2021 * ppc-opc.c (powerpc_operands): The signedp field has been
2022 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
2023 instead. Add new operand SISIGNOPT.
2024 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
2025 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
2026 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
2029 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2031 * i386-dis.c (struct private): Renamed to dis_private. `private'
2032 is a reserved word for dynix cc.
2034 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2036 * configure.in: Change error message to refer to bfd/config.bfd
2037 rather than bfd/configure.in.
2039 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
2041 * ppc-opc.c: Define POWER2 as short alias flag.
2042 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
2045 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2047 * i960-dis.c (print_insn_i960): Don't read a second word for
2048 opcodes 0, 1, 2 and 3.
2050 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2052 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
2054 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2056 * m68881-ext.c: Removed; no longer used.
2057 * Makefile.in: Changed accordingly.
2059 * m68k-dis.c (ext_format_68881): Don't declare.
2060 (print_insn_m68k): If an instruction uses place 'i', it uses at
2061 least four fixed bytes.
2062 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
2063 extended float, convert to double using floatformat_to_double, not
2064 ieee_extended_to_double, and fetch the data before converting it.
2066 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2068 * mips-opc.c: It's sqrt.s, not sqrt.w. From
2069 davidj@ICSI.Berkeley.EDU (David Johnson).
2071 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2073 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
2074 PowerPC uses bdnz[l][a].
2076 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2078 * dis-buf.c, i386-dis.c: Include sysdep.h.
2080 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2082 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
2084 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
2085 by Motorola PowerPC 601 with PPC_OPCODE_601.
2086 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
2087 Disassemble Motorola PowerPC 601 instructions as well as normal
2088 PowerPC instructions.
2090 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
2092 * i960-dis.c (reg, mem): Just use a static array instead of
2095 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2097 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
2098 condition name index if this is for a negated condition.
2100 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
2101 Floating point format for 'H' operand is backwards from normal
2102 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
2103 operands (fmpyadd and fmpysub), handle bizarre register
2104 translation correctly for single precision format.
2106 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
2107 or 'I' operands if the next format specifier is 'M' (fcmp
2108 condition completer).
2110 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2112 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
2113 single number giving a bitmask for the MB and ME fields of an M
2114 form instruction. Change NB to accept 32, and turn it into 0;
2115 also turn 0 into 32 when disassembling. Seperated SH from NB.
2116 (insert_mbe, extract_mbe): New functions.
2117 (insert_nb, extract_nb): New functions.
2118 (SC_MASK): Mask out SA and LK bits.
2119 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
2120 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
2121 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
2122 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
2123 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
2124 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
2125 (powerpc_macros): Define table of macro definitions.
2126 (powerpc_num_macros): Define.
2128 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
2129 if PPC_OPERAND_NEXT is set.
2131 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2133 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
2134 char. Retrieve contents using bfd_getl32 instead of shifting.
2136 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2138 * ppc-opc.c: New file. Opcode table for PowerPC, including
2139 opcodes for POWER (RS/6000).
2140 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
2141 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
2142 (CFILES): Add ppc-dis.c.
2143 (ppc-dis.o, ppc-opc.o): New targets.
2144 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
2146 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2148 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
2149 No space before 'u', 'f', or 'N'.
2151 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
2153 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
2154 farther than we should.
2156 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
2158 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2160 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
2162 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2164 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
2165 needs it, to prevent reading past the end of a section.
2167 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2169 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
2170 Removed t,A case for la; always use t,A(b) case.
2172 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2174 From Ted Lemen <mellon@pepper.ncd.com>
2175 * mips-dis.c (print_insn_arg): Handle 'k'.
2176 * mips-opc.c: Make cache use k, not t.
2178 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2180 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
2181 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
2182 FLOAT_FORMAT_CODE to put out floating point register names.
2184 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2186 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
2188 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2190 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
2192 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2194 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
2195 larger than 32. Moved dsxx32 variants first for disassembler.
2197 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2199 * z8kgen.c, z8k-opc.h: Add full lda information.
2201 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
2203 * hppa-dis.c (print_insn_hppa): Do not emit a space after
2204 movb instructions. Any necessary space will be emitted by
2205 the code to handle nullification completers.
2207 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2209 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
2211 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2213 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
2214 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
2216 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2218 * mips-opc.c: Correct lwu opcode value (book had it wrong).
2220 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2222 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
2223 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
2225 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
2227 * m88k-dis.c (m88kdis): comment change. Remove space after
2229 (printop): handle new arg types DEC and XREG for m88110.
2231 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
2233 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
2234 type for absolute branch addresses. Delete special
2235 "ble" and "be" code in 'W' operand code.
2237 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2239 * mips-opc.c: Set hazard information correctly for branch
2240 likely instructions.
2242 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2244 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
2245 info->fprintf_func for printing and info->print_address_func for
2248 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2250 * mips-opc.c: Set INSN_TRAP for tXX instructions.
2252 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2254 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
2255 Corrected second case of "b" for disassembler.
2257 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2259 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
2260 to BFD swapping routines to correspond to BFD name changes.
2262 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2264 * mips-opc.c: Change div machine instruction to be z,s,t rather
2265 than s,t. Change div macro to be d,v,t rather than d,s,t.
2266 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
2267 rem and remu which generates only the corresponding div
2268 instruction. This is for compatibility with the MIPS assembler,
2269 which only generates the simple machine instruction when an
2270 explicit destination of $0 is used.
2271 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
2273 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2275 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
2276 WR_31 hazard for bal, bgezal, bltzal.
2278 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2280 * hppa-dis.c (print_insn_hppa): Use print function
2281 from within the disassemble_info, not fprintf_filtered.
2283 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2285 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
2286 Law, law@cs.utah.edu.)
2288 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2290 * mips-opc.c ("absu"): Removed.
2293 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2295 * mips-opc.c: Added r6000 and r4000 instructions and macros.
2296 Changed hazard information to distinguish between memory load
2297 delays and coprocessor load delays.
2299 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2301 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
2303 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2305 * configure.in: Don't pass cpu to config.bfd.
2307 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2309 * m88k-dis.c (m88kdis): Make class unsigned.
2311 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
2313 * alpha-dis.c (print_insn_alpha): One branch format case was
2314 missing the instruction name.
2316 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2318 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
2319 Add the arch-specific auxiliary files.
2320 (OFILES): Remove the arch-specific auxiliary files
2321 and use BFD_MACHINES instead of DIS_LIBS.
2322 * configure.in: Set BFD_MACHINES based on --with-targets option.
2324 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2326 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
2329 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2331 * sparc-opc.c: Change CONST to const to deal with gcc
2332 -Dconst=__const -traditional.
2334 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2336 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
2337 coprocessor instructions out of #if 0, and made them use new
2340 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2342 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
2344 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
2346 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
2347 instruction, for use by the disassembler.
2349 * sparc-dis.c (SEX): Add sign extension macro. Replace many
2350 hand-coded sign extensions that depended on 32-bit host ints.
2351 FIXME, we still depend on big-endian host bitfield ordering.
2352 (sparc_print_insn): Set the insn_info_valid field, and the
2353 other fields that describe the instruction being printed.
2355 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
2357 * sparc-opc.c (call): Accept all 6 addressing modes valid for
2358 `jmp' instead of just one of them.
2360 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2362 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
2363 (fput_fp_reg_r): Renamed from fput_reg_r.
2364 (fput_fp_reg): New function.
2365 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
2367 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
2369 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
2371 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2373 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
2375 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
2376 don't output a space.
2378 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
2380 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
2382 * mips-opc.c: New file, containing opcode table from
2383 ../include/opcode/mips.h.
2384 * Makefile.in: Add it.
2386 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2388 * m88k-dis.c: New file, moved in from gdb and changed to use the
2389 new dis-asm.h disassembler interface.
2390 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
2391 (m88k-dis.o): New target.
2393 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
2395 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
2396 argument string const char * to correspond to opcode/mips.h.
2398 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
2400 * mips-dis.c: Updated to account for name changes in new version
2402 * Makefile.in: Added header file dependencies.
2404 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
2406 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
2408 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2410 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
2411 extend, rather than shifts.
2413 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
2415 * Makefile.in: Undo 15 June change.
2417 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
2419 * m68k-dis.c (print_insn_arg): Change return value to byte count
2421 * m68k-dis.c: Re-write to detect invalid operands before
2422 printing anything, so we can handle this the same way we
2423 handle invalid opcodes.
2425 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2427 * sh-dis.c, sh-opc.h: Understand some more opcodes.
2429 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
2431 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
2434 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2436 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
2438 * configure.in: Do make sysdep.h link.
2439 * Makefile.in: Search ../include. Don't search ../bfd.
2441 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
2443 Changes from Jeff Law, law@cs.utah.edu:
2444 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
2445 Do not print a space before the completers specified by
2448 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
2450 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
2451 defined, since gdb has been fixed.
2453 Changes from Jeff Law, law@cs.utah.edu:
2454 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
2455 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
2456 be a *disassemble_info, not a *FILE.
2457 * hppa-dis.c: Support 'd', '!', and 'a'.
2458 * hppa-dis.c: Support 's' to extract a 2 bit space register.
2459 * hppa-dis.c: Delete cases which are no longer needed.
2461 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
2463 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
2465 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2467 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
2470 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
2472 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
2473 * configure.in: No longer need to configure to get sysdep.h.
2475 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
2477 * Patches from Jeffrey Law <law@cs.utah.edu>.
2478 * hppa-dis.c: Support 'I', 'J', and 'K' in output
2479 templates for 1.1 FP computational instructions.
2481 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2483 * h8500-dis.c (print_insn_h8500): Address argument is type
2485 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
2488 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
2489 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
2491 * sparc-dis.c (compare_opcodes): Move static declaration to
2494 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2496 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
2497 instruction, remove unimp hack from 'l' argument.
2499 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
2501 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
2504 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
2506 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
2507 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
2510 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2512 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
2513 arrays of string pointers to 2-d arrays of chars, to save
2516 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
2518 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
2519 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
2521 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2523 * hppa-dis.c: New file from Utah, adapted to new disassembler
2525 * Makefile.in: Include it.
2527 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2529 * sh-dis.c, sh-opc.h: New files.
2531 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2533 * alpha-dis.c, alpha-opc.h: New files.
2535 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2537 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
2540 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
2542 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
2544 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
2546 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
2549 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
2551 * sparc-dis.c: Use fprintf_func a few places where I forgot,
2552 and double percent signs a few places.
2554 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
2556 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
2557 Use info->print_address_func not print_address.
2559 * dis-buf.c (generic_print_address): New function.
2561 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2563 * Makefile.in: Add sparc-dis.c.
2564 sparc-dis.c: New file, merges binutils and gdb versions as follows:
2566 Add `add' instruction to the set that get checked
2567 for a preceding `sethi' in order to print an absolute address.
2568 * (print_insn): Disassembly prefers real instructions.
2569 (is_delayed_branch): Speed up.
2570 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
2571 Still missing some float ops, and needs testing.
2572 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
2573 F_ALIAS. Use printf, not fprintf, when not passing a file
2575 (compare_opcodes): Check that identical instructions have
2576 identical opcodes, complain otherwise.
2579 * Include reg_names.
2581 Use dis-asm.h/read_memory_func interface.
2583 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
2585 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
2586 deliberately return non-zero to setjmp from longjmp. Otherwise
2587 this code fails to compile.
2589 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
2591 * m68k-dis.c: Fix prototype for fetch_arg().
2593 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2595 * dis-buf.c: New file, for new read_memory_func interface.
2596 Makefile.in (OFILES): Include it.
2597 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
2598 Use new read_memory_func interface.
2600 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2602 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
2603 * h8500-opc.h: Fix couple of opcodes.
2605 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
2607 * Makefile.in: add dvi & installcheck targets
2609 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
2611 * Makefile.in: Update for h8500-dis.c.
2613 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2615 * h8500-dis.c, h8500-opc.h: New files
2617 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
2619 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
2620 ../include/dis-asm.h.
2621 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
2622 and ../gdb/m68k-pinsn.c).
2623 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
2624 and ../gdb/i386-pinsn.c).
2625 * m68881-ext.c: New file. Moved definition of
2626 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
2627 * Makefile.in: Adjust for new files.
2628 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
2629 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
2630 can be dis-assembled.
2632 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2634 * mips-dis.c (print_insn_arg): Now returns void.
2636 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
2638 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
2639 files that use the macros.
2641 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2643 * mips-dis.c: New file, from gdb/mips-pinsn.c.
2644 * Makefile.in (DIS_LIBS): Added mips-dis.o.
2645 (CFILES): Added mips-dis.c.
2647 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2649 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
2650 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
2652 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
2654 * Makefile.in: Improve *clean rules.
2655 * configure.in: Allow a default host.
2657 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2659 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
2660 files include other sysdep files
2662 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2664 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
2666 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
2668 * configure.in: For host support, use ../bfd/configure.host
2669 so it stays in sync with the ../bfd/hosts database.
2671 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2673 * configure.in: use cpu-vendor-os triple instead of nested cases
2675 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
2677 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
2678 *always* the wrong one.
2680 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2682 * z8kgen.c: added copyright info
2684 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2686 * z8k-dis.c (unparse_instr): prettier tabs
2687 * z8kgen.c -> z8k-opc.h: bug fixes in tables
2689 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
2691 * configure.in: Add ncr* configuration.
2692 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
2693 picayune ANSI compilers happy.
2695 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
2697 * configure.in (i386): Make i386 and i486 synonymous for now.
2698 * configure.in (i[34]86-*-sysv4): Add my_host definition.
2700 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2702 * Makefile.in (install): Fix typo.
2704 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
2706 * Makefile.in (make): Remove obsolete crud.
2707 (sparc-opc.o): Avoid Sun Make VPATH bug.
2709 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
2711 * Makefile.in: since there are no SUBDIRS, remove rule and
2712 references of subdir_do.
2714 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2716 * Makefile.in (install): Get the library name right here too.
2717 Don't install bfd.h, since it's unrelated to this library. No
2718 subdirs to recurse into, either.
2719 (CFILES): The source file has a .c suffix, not .o.
2721 * sparc-opc.c: New file, moved from BFD.
2722 * Makefile.in (OFILES): Build it.
2724 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
2726 * z8k-dis.c: fixed forward refferences of some declarations.
2728 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
2730 * Makefile.in: get the name of the library right
2732 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2734 * z8k-dis.c: knows how to disassemble z8k stuff
2735 * z8k-opc.h: new file full of z8000 opcodes
2739 version-control: never