opcodes/ChangeLog

   1 Thu Feb 15 14:45:05 1996  Ian Lance Taylor  <ian@cygnus.com>
   2
   3         * configure.in: Call AC_PROG_CC before configure.host.
   4         * configure: Rebuild.
   5
   6         * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
   7
   8 Wed Feb 14 19:01:27 1996  Alan Modra  <alan@spri.levels.unisa.edu.au>
   9
  10         * i386-dis.c (onebyte_has_modrm): New static array.
  11         (twobyte_has_modrm): New static array.
  12         (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
  13
  14 Tue Feb 13 15:15:01 1996  Ian Lance Taylor  <ian@cygnus.com>
  15
  16         * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
  17         $(SHLINK).
  18
  19 Mon Feb 12 16:26:06 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
  20
  21         * ppc-opc.c (PPC): Undef, so default defination on Windows NT
  22         doesn't conflict.
  23
  24 Wed Feb  7 13:59:54 1996  Ian Lance Taylor  <ian@cygnus.com>
  25
  26         * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
  27         m68010up, not just m68020up | cpu32.
  28
  29         * Makefile.in (SONAME): New variable.
  30         ($(SHLINK)): Make a link to the transformed name, as well.
  31         (stamp-tshlink): New target.
  32         (install): Skip stamp-tshlink during install.
  33
  34 Tue Feb  6 12:28:54 1996  Ian Lance Taylor  <ian@cygnus.com>
  35
  36         * configure.in: Call AC_ARG_PROGRAM.
  37         * configure: Rebuild.
  38         * Makefile.in (program_transform_name): New variable.
  39         (install): Transform library name before installing it.
  40
  41 Mon Feb  5 16:14:42 1996  Ian Lance Taylor  <ian@cygnus.com>
  42
  43         * i960-dis.c (mem): Add HX dcinva instruction.
  44         (reg): Add HX instructions.
  45         start-sanitize-i960xl
  46         The HX instructions are the XL instructions, so this just involves
  47         arranges for them to not be sanitized.
  48         end-sanitize-i960xl
  49
  50         Support for building as a shared library, based on patches from
  51         Alan Modra <alan@spri.levels.unisa.edu.au>:
  52         * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
  53         New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
  54         SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
  55         * configure: Rebuild.
  56         * Makefile.in (ALLLIBS): New variable.
  57         (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
  58         (COMMON_SHLIB, SHLINK): New variables.
  59         (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
  60         (STAGESTUFF): Remove variable.
  61         (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
  62         (stamp-piclist, piclist): New targets.
  63         ($(SHLIB), $(SHLINK)): New targets.
  64         ($(OFILES)): Depend upon stamp-picdir.
  65         (disassemble.o): Build twice if PICFLAG is set.
  66         (MOSTLYCLEAN): Add pic/*.o.
  67         (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
  68         (distclean): Remove pic and stamp-picdir.
  69         (install): Install shared libraries.
  70         (stamp-picdir): New target.
  71
  72 Fri Feb  2 17:15:25 1996  Doug Evans  <dje@charmed.cygnus.com>
  73
  74         * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
  75         Print unknown instruction as "unknown", rather than in hex.
  76
  77 Tue Jan 30 14:06:08 1996  Ian Lance Taylor  <ian@cygnus.com>
  78
  79         * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
  80
  81 Thu Jan 25 20:24:07 1996  Doug Evans  <dje@charmed.cygnus.com>
  82
  83         * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
  84
  85 Thu Jan 25 11:56:49 1996  Ian Lance Taylor  <ian@cygnus.com>
  86
  87         * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
  88         when necessary.  From Ulrich Drepper
  89         <drepper@myware.rz.uni-karlsruhe.de>.
  90
  91 Thu Jan 25 03:39:10 1996  Doug Evans  <dje@charmed.cygnus.com>
  92
  93         * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
  94         sparc_num_opcodes.  Update architecture enum values.
  95         * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
  96         (sparc_opcode_lookup_arch): New function.
  97         (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
  98         (sparc_opcodes): Add v9a shutdown insn.
  99
 100 Mon Jan 22 08:29:59 1996  Doug Evans  <dje@charmed.cygnus.com>
 101
 102         * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
 103         If DISASM_RAW_INSN, print insn in hex.  Handle v9a as opcode
 104         architecture.
 105         (print_insn_sparc64): Deleted.
 106         * disassemble.c (disassembler, case bfd_arch_sparc): Always use
 107         print_insn_sparc.
 108
 109         * sparc-opc.c (architecture_pname): Add v9a.
 110
 111 Fri Jan 12 14:35:58 1996  David Mosberger-Tang  <davidm@AZStarNet.com>
 112
 113         * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
 114         incorrectly defined as 0x16 when it should be 0x15.
 115         (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
 116         (alpha_insn_set): added cvtst and cvttq float ops.  Also added
 117         excb (exception barrier) which is defined in the Alpha
 118         Architecture Handbook version 2.
 119         * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
 120         OPERATE_FORMAT_CODE type instructions.  The bug caused mulq to be
 121         disassembled as or, for example.
 122
 123 Wed Jan 10 12:37:22 1996  Ian Lance Taylor  <ian@cygnus.com>
 124
 125         * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
 126         (_print_insn_mips): Change i from int to unsigned int.
 127
 128 Thu Jan  4 17:21:10 1996  David Edelsohn  <edelsohn@mhpcc.edu>
 129
 130         * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
 131         from tlbie PowerPC opcode.  Add PPC603 tlbld and tlbli.
 132
 133 Thu Dec 28 13:29:19 1995  John Hassey  <hassey@rtp.dg.com>
 134
 135         * i386-dis.c: Added Pentium Pro instructions.
 136
 137 Tue Dec 19 22:56:35 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
 138
 139         * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
 140         being for Power2.
 141
 142 Fri Dec 15 14:14:15 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
 143
 144         * sh-opc.h (sh_nibble_type): Added REG_B.
 145         (sh_arg_type): Added A_REG_B.
 146         (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
 147         and stc.l opcodes.
 148         * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
 149
 150 Fri Dec 15 16:44:31 1995  Ian Lance Taylor  <ian@cygnus.com>
 151
 152         * disassemble.c (disassembler): Use new bfd_big_endian macro.
 153
 154 Tue Dec 12 12:22:24 1995  Ian Lance Taylor  <ian@cygnus.com>
 155
 156         * Makefile.in (distclean): Remove stamp-h.  From Ronald
 157         F. Guilmette <rfg@monkeys.com>.
 158
 159 Tue Dec  5 13:42:44 1995  Stan Shebs  <shebs@andros.cygnus.com>
 160
 161         From David Mosberger-Tang  <davidm@azstarnet.com>:
 162         * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
 163         instruction.
 164
 165 Mon Dec  4 12:29:05 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
 166
 167         * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
 168         (sh_table): Added many SH3 opcodes.
 169         * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
 170
 171 Fri Dec  1 07:42:18 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
 172
 173         * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
 174         (subco,subco.): Mark this PPC, not PPCCOM.
 175
 176 Mon Nov 27 13:09:52 1995  Ian Lance Taylor  <ian@cygnus.com>
 177
 178         * configure: Rebuild with autoconf 2.7.
 179
 180 Tue Nov 21 18:28:06 1995  Ian Lance Taylor  <ian@cygnus.com>
 181
 182         * configure: Rebuild with autoconf 2.6.
 183
 184 Wed Nov 15 19:02:53 1995  Ken Raeburn  <raeburn@cygnus.com>
 185
 186         * configure.in: Sort list of architectures.  Accept but do nothing
 187         for alliant, convex, pyramid, romp, and tahoe.
 188
 189 Wed Nov  8 20:18:59 1995  Ian Lance Taylor  <ian@cygnus.com>
 190
 191         * a29k-dis.c (print_special): Change num to unsigned int.
 192
 193 Wed Nov  8 20:10:35 1995  Eric Freudenthal <freudenthal@nyu.edu>
 194
 195         * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
 196         shifting it.
 197
 198 Tue Nov  7 15:21:06 1995  Ian Lance Taylor  <ian@cygnus.com>
 199
 200         * configure.in: Call AC_CHECK_PROG to find and cache AR.
 201         * configure: Rebuilt.
 202
 203 Mon Nov  6 17:39:47 1995  Harry Dolan  <dolan@ssd.intel.com>
 204
 205         * configure.in: Add case for bfd_i860_arch.
 206         * configure: Rebuild.
 207
 208 Fri Nov  3 12:45:31 1995  Ian Lance Taylor  <ian@cygnus.com>
 209
 210         * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
 211         * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
 212         (NEXTDOUBLE): Likewise.
 213         (print_insn_m68k): Don't match fmoveml if there is more than one
 214         register in the list.
 215         (print_insn_arg): Handle a place of '8' for a type of 'L'.
 216
 217 Thu Nov  2 23:06:33 1995  Ian Lance Taylor  <ian@cygnus.com>
 218
 219         * m68k-opc.c: Use #W rather than #w.
 220         * m68k-dis.c (print_insn_arg): Handle new 'W' place.
 221
 222 Wed Nov  1 13:30:24 1995  Ian Lance Taylor  <ian@cygnus.com>
 223
 224         * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
 225         and likewise for all the dbxx opcodes.
 226
 227 Mon Oct 30 20:50:40 1995  Fred Fish  <fnf@cygnus.com>
 228
 229         * arc-dis.c: Include elf-bfd.h rather than libelf.h.
 230
 231 Mon Oct 23 11:11:34 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
 232
 233         * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
 234         the VR4100 specific instructions to the mips_opcodes structure.
 235
 236 Thu Oct 19 11:05:23 1995  Stan Shebs  <shebs@andros.cygnus.com>
 237
 238         * mpw-config.in, mpw-make.sed: Remove ugly workaround for
 239         ugly Metrowerks bug in CW6, is fixed in CW7.
 240
 241 Mon Oct 16 12:59:01 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
 242
 243         * ppc-opc.c (whole file): Add flags for common/any support.
 244
 245 Tue Oct 10 11:06:07 1995  Fred Fish  <fnf@cygnus.com>
 246
 247         * Makefile.in (BISON): Remove macro.
 248         (FLAGS_TO_PASS): Remove BISON.
 249
 250 Fri Oct  6 16:26:45 1995  Ken Raeburn  <raeburn@cygnus.com>
 251
 252         Mon Sep 25 22:49:32 1995  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
 253
 254         * m68k-dis.c (print_insn_m68k): Recognize all two-word
 255         instructions that take no args by looking at the match mask.
 256         (print_insn_arg): Always print "%" before register names.
 257         [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
 258         [case '_']: Don't print "@#" before address.
 259         [case 'J']: Use "%s" as format string, not register name.
 260         [case 'B']: Treat place == 'C' like 'l' and 'L'.
 261
 262 Thu Oct  5 22:16:20 1995  Ken Raeburn  <raeburn@cygnus.com>
 263
 264         * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
 265         name correctly.
 266
 267 Tue Oct  3 08:30:20 1995  steve chamberlain  <sac@slash.cygnus.com>
 268
 269         From David Mosberger-Tang  <davidm@azstarnet.com>
 270
 271         * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
 272         (alpha_insn_set): added definitions for VAX floating point
 273         instructions (Unix compilers don't generate these, but handcoded
 274         assembly might still use them).
 275
 276         * alpha-dis.c (print_insn_alpha): added support for disassembling
 277         the miscellaneous instructions in the Alpha instruction set.
 278
 279 Tue Sep 26 18:47:20 1995  Stan Shebs  <shebs@andros.cygnus.com>
 280
 281         * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
 282         no longer create sysdep.h, sed ppc-opc.c to work around a
 283         serious Metrowerks C bug.
 284         * mpw-make.in: Remove.
 285         * mpw-make.sed: New file, used by mpw-configure to edit
 286         Makefile.in into an MPW makefile.
 287
 288 Wed Sep 20 12:55:28 1995  Ian Lance Taylor  <ian@cygnus.com>
 289
 290         * Makefile.in (maintainer-clean): New synonym for realclean.
 291
 292 Tue Sep 19 15:28:36 1995  Ian Lance Taylor  <ian@cygnus.com>
 293
 294         * m68k-opc.c: Split pmove patterns which use 'P' into patterns
 295         which use '0', '1', and '2' instead.  Specify the proper size for
 296         a pmove immediate operand.  Correct the pmovefd patterns to be
 297         moves to a register, not from a register.
 298         * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
 299
 300 Thu Sep 14 11:58:22 1995  Doug Evans  <dje@canuck.cygnus.com>
 301
 302         * sparc-opc.c (sparc_opcodes): Mark all insns that reference
 303         %psr, %wim, %tbr as F_NOTV9.
 304
 305 Fri Sep  8 01:07:38 1995  Ian Lance Taylor  <ian@cygnus.com>
 306
 307         * Makefile.in (Makefile): Just rebuild Makefile when running
 308         config.status.
 309         (config.h, stamp-h): New targets.
 310         * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
 311         earlier.  Don't bother to call AC_ARG_PROGRAM.  Touch stamp-h when
 312         rebuilding config.h.
 313         * configure: Rebuild.
 314
 315         * mips-opc.c: Change unaligned loads and stores with "t,A"
 316         operands to use "t,A(b)".
 317
 318 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 319
 320         * sh-dis.c (print_insn_shx): Add F_FR0 support.
 321
 322 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 323
 324         * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
 325         until 3 instead of until 2.
 326
 327 Wed Sep  6 21:21:33 1995  Ian Lance Taylor  <ian@cygnus.com>
 328
 329         * Makefile.in (ALL_CFLAGS): Define.
 330         (.c.o, disassemble.o): Use $(ALL_CFLAGS).
 331         (MOSTLYCLEAN): Add config.log.
 332         (distclean): Don't remove config.log.
 333         * configure.in: Substitute HDEFINES.
 334         * configure: Rebuild.
 335
 336 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 337
 338         * sh-opc.h (sh_arg_type): Add F_FR0.
 339         (sh_table, case fmac): Add F_FR0 as first argument.
 340
 341 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 342
 343         * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
 344
 345 Tue Sep  5 18:28:10 1995  Doug Evans  <dje@canuck.cygnus.com>
 346
 347         * sparc-dis.c: Remove all references to NO_V9.
 348
 349 Tue Sep  5 20:03:26 1995  Ian Lance Taylor  <ian@cygnus.com>
 350
 351         * aclocal.m4: Just include ../bfd/aclocal.m4.
 352         * configure: Rebuild.
 353
 354 Tue Sep  5 16:09:59 1995  Doug Evans  <dje@canuck.cygnus.com>
 355
 356         * sparc-dis.c (X_DISP19): Define.
 357         (print_insn, case 'G'): Use it.
 358         (print_insn, case 'L'): Sign extend displacement.
 359
 360 Mon Sep  4 14:28:46 1995  Ian Lance Taylor  <ian@cygnus.com>
 361
 362         * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
 363         Subsitute CFLAGS and AR.  Call AC_PROG_INSTALL.  Don't substitute
 364         host_makefile_frag or frags.
 365         * aclocal.m4: New file.
 366         * configure: Rebuild.
 367         * Makefile.in (INSTALL): Set to @INSTALL@.
 368         (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
 369         (INSTALL_DATA): Set to @INSTALL_DATA@.
 370         (AR): Set to @AR@.
 371         (AR_FLAGS): Set to rc rather than qc.
 372         (CC): Define as @CC@.
 373         (CFLAGS): Set to @CFLAGS@.
 374         (@host_makefile_frag@): Remove.
 375         (config.status): Remove dependency upon @frags@.
 376
 377         * configure.in: ../bfd/config.bfd now just sets shell variables.
 378         Use them rather than looking through target Makefile fragments.
 379         * configure: Rebuild.
 380
 381 Thu Aug 31 12:35:32 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 382
 383         * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
 384
 385 Wed Aug 30 13:52:28 1995  Doug Evans  <dje@canuck.cygnus.com>
 386
 387         * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
 388         Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
 389         sparc64 insns.
 390
 391         * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
 392         (lookup_{name,value}): New functions.
 393         (prefetch_table): New static local.
 394         (sparc_{encode,decode}_prefetch): New functions.
 395         * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
 396
 397 Wed Aug 30 11:11:58 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 398
 399         * sh-opc.h: Add blank lines to improve readabililty of sh3e
 400         instructions.
 401
 402 Wed Aug 30 11:09:38 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 403
 404         * sh-dis.c: Correct comment on first line of file.
 405
 406 Tue Aug 29 15:37:18 1995  Doug Evans  <dje@canuck.cygnus.com>
 407
 408         * disassemble.c (disassembler): Handle bfd_mach_sparc64.
 409
 410         * sparc-opc.c (asi, membar): New static locals.
 411         (sparc_{encode,decode}_{asi,membar}): New functions.
 412         (sparc_opcodes, membar insn): Fix.
 413         * sparc-dis.c (print_insn): Call sparc_decode_asi.
 414         Support decoding of membar masks.
 415         (X_MEMBAR): Define.
 416
 417 Sat Aug 26 21:22:48 1995  Ian Lance Taylor  <ian@cygnus.com>
 418
 419         * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
 420
 421 Mon Aug 21 17:33:36 1995  Ian Lance Taylor  <ian@cygnus.com>
 422
 423         * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
 424         and likewise for the other branches.  Add bhs as an alias for bcc,
 425         and likewise for the size variants.  Add dbhs as an alias for
 426         dbcc.
 427
 428 Fri Aug 11 13:40:24 1995  Jeff Law  (law@snake.cs.utah.edu)
 429
 430         * sh-opc.h (FP sts instructions): Update to match reality.
 431
 432 Mon Aug  7 16:12:58 1995  Ian Lance Taylor  <ian@cygnus.com>
 433
 434         * m68k-dis.c: (fpcr_names): Add % before all register names.
 435         (reg_names): Likewise.
 436         (print_insn_arg): Don't explicitly print % before register names.
 437         Add % before register names in static array names.  In case 'r',
 438         print data registers as `@(Dn)', not `Dn@'.  When printing a
 439         memory address, don't print @# before it.
 440         (print_indexed): Change base_disp and outer_disp from int to
 441         bfd_vma.  Print using MIT syntax, not mutant invalid Motorola
 442         syntax.  Sign extend 8 byte displacement correctly.
 443         (print_base): Print using MIT syntax.  Print zpc when appropriate.
 444         Change parameter disp from int to bfd_vma.
 445
 446         * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
 447         for jsr.
 448
 449 Mon Aug  7 02:21:40 1995  Jeff Law  (law@snake.cs.utah.edu)
 450
 451         * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
 452         F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
 453         * sh-opc.h (sh_arg_type): Add new operand types.
 454         (sh_table): Add new opcodes from SH3E Floating Point ISA.
 455
 456 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
 457
 458         * Makefile.in (distclean): Remove generated file config.h.
 459
 460 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
 461
 462         * Makefile.in (distclean): Remove generated file config.h.
 463
 464 Wed Aug  2 18:33:40 1995  Ian Lance Taylor  <ian@cygnus.com>
 465
 466         * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
 467         Clean up tables.
 468         * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
 469         (opcode): Remove.
 470         (print_insn_m68k): Change d to be const.  Use m68k_numopcodes
 471         rather than numopcodes.  Use m68k_opcodes rather than removed
 472         opcode function.  Don't check F_ALIAS.
 473         (print_insn_arg): Change first parameter to be const char *.
 474         * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
 475         (m68k-opc.o): New target.
 476         * configure.in: Build m68k-opc.o for bfd_m68k_arch.
 477         * configure: Rebuild.
 478
 479 Wed Aug  2 08:23:38 1995  Doug Evans  <dje@canuck.cygnus.com>
 480
 481         * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
 482         (opcode_bits, opcode_hash_table): New variables.
 483         (opcodes_initialized): Renamed from opcodes_sorted.
 484         (build_hash_table): New function.
 485         (is_delayed_branch): Use hash table.
 486         (print_insn): Renamed from print_insn_sparc, made static.
 487         Build and use hash table.  If !sparc64, ignore sparc64 insns,
 488         and vice-versa if sparc64.
 489         (print_insn_sparc, print_insn_sparc64): New functions.
 490         (compare_opcodes): Move sparc64 opcodes to end.
 491         Print commutative insns with constant second.
 492         * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
 493
 494 Tue Aug  1 00:12:49 1995  Ian Lance Taylor  <ian@cygnus.com>
 495
 496         * sh-dis.c (print_insn_shx): Remove unused local dslot.  Use
 497         print_address_func for A_BDISP12 and A_BDISP8.  Correct test which
 498         avoids printing a delay slot in a delay slot.
 499         * sh-opc.h (sh_table): Fully bracket last entry.
 500
 501 Mon Jul 31 12:04:47 1995  Doug Evans  <dje@canuck.cygnus.com>
 502
 503         * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
 504
 505 Wed Jul 12 00:59:34 1995  Ken Raeburn  <raeburn@kr-pc.cygnus.com>
 506
 507         * configure.in: Get host_makefile_frag from ${srcdir}.
 508
 509         * configure.in: Autoconfiscated.  Check for string[s].h.  Create
 510         config.h from config.in.  Don't set up sysdep.h link.
 511         * sysdep.h: New file.
 512         * configure, config.in: New files, generated from configure.in.
 513         * Makefile.in: Updated to be processed autoconf-style.
 514         (distclean): Keep sysdep.h.  Remove config.log and config.cache.
 515         (Makefile): Depend on config.status.
 516         (config.status): New rule.
 517         * configure.bat: Update Makefile substitutions.
 518
 519 Tue Jul 11 14:23:37 1995  Jeff Spiegel  <jeffs@lsil.com>
 520
 521         * mips-opc.c (L1): Define.
 522         (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
 523         addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
 524         and wb.
 525
 526 Tue Jul 11 11:49:49 1995  Ian Lance Taylor  <ian@cygnus.com>
 527
 528         * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
 529         if ISA 3 and addu otherwise, replacing or, since some MIPS chips
 530         have multiple add units but only a single logical unit.
 531
 532         * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
 533         shifted by 18, without any insertion or extraction function.
 534         (insert_cr, extract_cr): Remove.
 535
 536 start-sanitize-arc
 537 Mon Jul  3 11:54:31 1995  Ian Lance Taylor  <ian@cygnus.com>
 538
 539         * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
 540
 541 end-sanitize-arc
 542 Wed Jun 21 20:05:39 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 543
 544         * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
 545         register names.
 546
 547 Thu Jun 15 17:23:31 1995  Stan Shebs  <shebs@andros.cygnus.com>
 548
 549         * mpw-config.in: Add sh and i386 configs, remove sparc config.
 550         * sh-opc.h: Add copyright.
 551
 552 Mon Jun  5 03:30:43 1995  Ken Raeburn  <raeburn@kr-laptop.cygnus.com>
 553
 554         * Makefile.in (crunch-m68k): Delete extra target accidentally
 555         checked in a while ago.
 556
 557 Wed May 24 16:22:13 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 558
 559         * sh-opc.h (sh_table): Add SH3 support.
 560
 561 Wed May 24 14:16:08 1995  Steve Chamberlain  <sac@slash.cygnus.com>
 562
 563         * sh-opc.h: Added bsrf and braf.
 564
 565 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
 566
 567         * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns.  Delete
 568         bogus [ls]fm{ea,fd} patterns.
 569
 570         * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
 571         * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
 572         initialize it from memory.  Make function static.
 573         (print_insn_{big,little}_arm): New functions.
 574         * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
 575         the correct endianness.
 576
 577 start-sanitize-arc
 578 Sat Apr 29 23:20:05 1995  Doug Evans  <dje@chestnut.cygnus.com>
 579
 580         * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
 581         (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
 582 end-sanitize-arc
 583
 584 Mon Apr 24 14:18:05 1995  Jason Molenda   (crash@phydeaux.cygnus.com>
 585
 586         * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
 587         enum list.
 588
 589 Wed Apr 19 14:07:03 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
 590
 591         * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
 592         17th, so that it builds again using GCC as the compiler.
 593
 594 Tue Apr 18 12:14:51 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 595
 596         * mips-dis.c (print_insn_little_mips): Cast return value from
 597         bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
 598         expects an unsigned long, and that might be fewer words of
 599         argument storage (e.g., if bfd_vma is long long on a 32-bit
 600         machine).
 601         (print_insn_big_mips): Likewise with bfd_getb32 value.
 602         (_print_insn_mips): Now static.
 603
 604 Mon Apr 17 12:23:28 1995  Kung Hsu  <kung@rtl.cygnus.com>
 605
 606         * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
 607         gcc memory hog problem with initializer is fixed.
 608
 609 start-sanitize-arc
 610 Wed Apr 12 09:04:12 1995  Doug Evans  <dje@canuck.cygnus.com>
 611
 612         * arc-opc.c (NULL): Define.
 613         (arc_operands, insn fields u,s): Delete.
 614         (arc_operands, insn fields a,b,c): Mark as signed.
 615         (arc_opcodes): No longer const, links computed at run-time.
 616         (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
 617         suffixes that affect the insn code.
 618         (arc_opcodes): Resort table to macros are first.
 619         (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
 620         (arc_opcodes, st [b] entry): Likewise.
 621         (arc_opcodes, st [b,d] entry): Fix mask, value.
 622         (arc_reg_names): Add entries for r29, r30, r31, r60.
 623         (opcode_map, icode_map): New static globals.
 624         (arc_opcode_init_tables): Initialize them.
 625         (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
 626         (insert_shimmoffset): Signal error if register present.
 627         Validate constant.
 628         * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
 629 end-sanitize-arc
 630
 631 Mon Apr 10 15:55:01 1995  Stan Shebs  <shebs@andros.cygnus.com>
 632
 633         Merge in support for Mac MPW as a host.
 634         (Old change descriptions retained for informational value.)
 635
 636         * mpw-config.in (archname): Compute from the config.
 637         (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
 638
 639         * mpw-config.in (target_arch): Compute from canonical target.
 640         (m68k, mips, powerpc, sparc): Add architectures.
 641         * mpw-make.in (disassemble.c.o): Add.
 642         (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
 643
 644         * mpw-config.in (BFD_MACHINES): Set to a default value.
 645         * mpw-make.in (BFD_MACHINES): Remove wired-in value.
 646
 647         * mpw-make.in (CSEARCH): Add extra-include to search path.
 648
 649         * mpw-config.in (varargs.h): Don't create.
 650         (sysdep.h): Create using forward-include.
 651         * mpw-make.in (CSEARCH): Add include/mpw to search path.
 652
 653         * mpw-config.in: New file, MPW version of configure.in.
 654         * mpw-make.in: New file, MPW version of Makefile.in.
 655
 656 start-sanitize-arc
 657 Thu Apr  6 20:36:08 1995  Doug Evans  <dje@chestnut.cygnus.com>
 658
 659         * arc-dis.c (print_insn): New parameter `big_p'.  Callers updated.
 660         Call arc_get_opcode_mach to map bfd mach number to opcode value.
 661         (print_insn_*): Pass bfd mach number, not opcode version.
 662         * arc-opc.c (arc_get_opcode_mach): New function.
 663 end-sanitize-arc
 664
 665 Fri Mar 31 14:23:38 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 666
 667         * alpha-dis.c (print_insn_alpha): Put empty statement after
 668         default label.
 669
 670 Tue Mar 21 10:51:40 1995  Jeff Law  (law@snake.cs.utah.edu)
 671
 672         * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
 673         (low_sign_extend): Likewise.
 674         (get_field): Delete unused function.
 675         (set_field, deposit_14, deposit_21): Likewise.
 676
 677 Fri Mar 17 15:55:53 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
 678
 679         * i386-dis.c: Support for more pentium opcodes.  From Guy Harris
 680           (guy@netapp.com).
 681
 682 Tue Mar 14 00:52:57 1995  Ken Raeburn  (raeburn@kr-pc.cygnus.com)
 683
 684         Sat Feb 11 17:22:41 1995  Klaus Kaempf  (kkaempf@didymus.rmi.de)
 685
 686         * alpha-opc.h (OSF_ASMCODE): define
 687         print pal-code names as defined in App C of the
 688         Alpha Architecture Reference Manual
 689
 690         * alpha-dis.c: cleaned up output
 691         print stylized code forms as defined in App A.4.3 of the
 692         Alpha Architecture Reference Manual
 693
 694 Wed Mar  8 15:21:14 1995  Ian Lance Taylor  <ian@cygnus.com>
 695
 696         * mips-opc.c: Add new mips4 instructions.  Don't set INSN_RFE for
 697         `rfe'.
 698         * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
 699         'N', and 'M'.
 700
 701 Wed Mar  8 02:54:05 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 702
 703         * m68k-dis.c (opcode): New function.  Returns address of opcode
 704         table entry given index, even if the opcode table was split to
 705         work around gcc bugs.
 706         (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
 707         directly.
 708         (BREAK_UP_BIG_DECL): Make secondary array static and const.
 709         (reg_names): Now const.
 710         (print_insn_arg): Arrays cacheFieldName and names now const.
 711         (print_indexed): Array scales now const.
 712
 713 start-sanitize-arc
 714 Tue Mar  7 21:14:14 1995  Doug Evans  <dje@chestnut.cygnus.com>
 715
 716         * arc-dis.c (print_insn_arc_base): Split into big and little fns.
 717         (print_insn_arc_{host,graphics,audio}): Likewise.
 718         (print_insn): Add prototype.
 719         (arc_get_disassembler): New arg `big_p'.  Return little or big
 720         print fn accordingly.
 721         * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
 722         (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
 723         (arc_opval_supported): Likewise.
 724         * disassemble.c (disassembler): Pass big endian flag to
 725         arc_get_disassembler.
 726 end-sanitize-arc
 727
 728 Tue Mar  7 16:41:21 1995  Ian Lance Taylor  <ian@cygnus.com>
 729
 730         * ppc-opc.c: Sort recently added instructions by minor opcode
 731         number within major opcode number.
 732
 733 Mon Mar  6 10:04:36 1995  Jeff Law  (law@snake.cs.utah.edu)
 734
 735         * hppa-dis.c: Include libhppa.h.
 736
 737 Fri Feb 24 19:15:36 1995  Ian Lance Taylor  <ian@cygnus.com>
 738
 739         * mips-opc.c: Change dli to use M_DLI, and add dla.
 740
 741 Mon Feb 20 23:54:38 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 742
 743         * Makefile.in (ALL_MACHINES):  Add w65-dis.o.
 744
 745 start-sanitize-arc
 746 Fri Feb 17 12:42:25 1995  Doug Evans  <dje@chestnut.cygnus.com>
 747
 748         * arc-dis.c (arc_get_disassembler): Change argument to int,
 749         one of bfd_mach_arc_xxx.  All callers updated.
 750 end-sanitize-arc
 751
 752 Thu Feb 16 17:34:41 1995  Ian Lance Taylor  <ian@cygnus.com>
 753
 754         * mips-opc.c: Add r4650 mul instruction.
 755
 756 Wed Feb 15 15:45:20 1995  Ian Lance Taylor  <ian@cygnus.com>
 757
 758         * mips-opc.c: Add uld and usd macros for unaligned double load and
 759         store.
 760
 761 Tue Feb 14 13:17:37 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
 762
 763         * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
 764         mfdcr, mtdcr, icbt, iccci.
 765
 766 start-sanitize-arc
 767 Mon Feb 13 11:09:17 1995  Doug Evans  <dje@canuck.cygnus.com>
 768
 769         * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
 770         * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
 771         ('L' operand): Mark as ARC_OPERAND_ADDRESS.
 772         (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
 773         (arc_opcodes, ld/st insns): Fix address writeback operand letter.
 774         (insert_absaddr): New function.
 775
 776 Thu Feb  9 19:19:23 1995  Doug Evans  <dje@canuck.cygnus.com>
 777
 778         * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
 779         New argument `cpu', pass it to arc_opcode_init_tables.
 780         Document byte order dependencies.  Ignore unsupported insns.
 781         (arc_get_disassembler): New function.
 782         (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
 783         print_insn_arc_audio): New functions.
 784         * arc-opc.c (MULTSHIFT operand): Delete.
 785         (UNSIGNED, SATURATION): New operands.
 786         (mac, mul, mul64, mulu64): New insns.
 787         (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
 788         (padc, padd, pmov, pand, psbc, psub, swap): New insns.
 789         (host,graphics,audio extended and auxiliary regs): Define.
 790         (ss, sc, mh, ml): New suffixes.
 791         (arc_opcode_supported, arc_opval_supported): New functions.
 792         (insert_multshift, extract_multshift): Deleted.
 793         * disassemble.c (disassembler, case bfd_arch_arc): Call
 794         arc_get_disassembler to get disassembler routine.
 795 end-sanitize-arc
 796
 797 Thu Feb  9 12:28:13 1995  Stan Shebs  <shebs@andros.cygnus.com>
 798
 799         * i960-dis.c (struct tabent, struct sparse_tabent): Change the
 800         signed char fields to shorts, more portable.
 801
 802 Wed Feb  8 17:29:29 1995  Stan Shebs  <shebs@andros.cygnus.com>
 803
 804         * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
 805         char fields as signed chars, since they may have negative values.
 806
 807 Mon Feb  6 10:52:06 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
 808
 809         * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
 810           (mycroft@netbsd.org).
 811
 812 Mon Jan 30 12:38:00 1995  Ian Lance Taylor  <ian@cygnus.com>
 813
 814         From "Logg, Ed" <elogg@ea.com>:
 815         * ppc-opc.c (extract_bdm): Correct parenthezisation.
 816         * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
 817         value.
 818
 819 Thu Jan 26 18:32:08 1995  Ian Lance Taylor  <ian@cygnus.com>
 820
 821         * ppc-opc.c: Changes based on patch from David Edelsohn
 822         <edelsohn@mhpcc.edu>.
 823         (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
 824         SPR.
 825         (FXM_MASK): Define.
 826         (insert_tbr): New static function.
 827         (extract_tbr): New static function.
 828         (XFXFXM_MASK, XFXM): Define.
 829         (XSPRBAT_MASK, XSPRG_MASK): Define.
 830         (powerpc_opcodes): Add instructions to access special registers by
 831         name.  Add mtcr and mftbu.
 832
 833 Tue Jan 17 10:56:43 1995  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 834
 835         * mips-opc.c (P3): Define.
 836         (mips_opcodes): Add mad and madu.
 837
 838 Sun Jan 15 16:32:59 1995  Steve Chamberlain  <sac@splat>
 839
 840         * configure.in: Add W65 support.
 841         * disassemble.c: Likewise.
 842         * w65-opc.h, w65-dis.c: New files.
 843
 844 Wed Dec 28 22:15:33 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
 845
 846         * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
 847         immediates.
 848
 849 start-sanitize-arc
 850 Tue Dec 20 10:36:55 1994  Doug Evans  <dje@canuck.cygnus.com>
 851
 852         * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
 853         slot.
 854         * arc-opc.c (extract_reladdr): New function.
 855         (insert_reladdr): Store address right-shifted by 2.
 856 end-sanitize-arc
 857
 858 Tue Dec 20 11:25:12 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 859
 860         * mips-opc.c: Add dli as a synonym for li.
 861
 862 start-sanitize-arc
 863 Mon Dec 19 12:35:51 1994  Doug Evans  <dje@canuck.cygnus.com>
 864
 865         * arc-opc.c (insertion fns): Pass pointer to value's table entry.
 866         All uses changed.
 867         (extraction fns): Insn argument now array of two words.  Return pointer
 868         to value's table entry.  All uses changed.
 869         (arc_opcode_lookup_suffix): Exported for arc-dis.c.
 870         (insert_multshift, extract_multshift): New fns.
 871         (arc_operands): Add support for cache bypass suffix.  Add support for
 872         predefined aux regs.  Modifier bits moved to flags field.
 873         (arc_opcodes): Likewise.
 874         Add mul/mulu/shift insns.  Syntax of zero/sign extension insns changed.
 875         New insn rlc.  Update to syntax in programmer's manual.
 876         (arc_reg_names): Fix typo in lp_count.  Add predefined aux regs.
 877         (arc_suffixes): New synonyms lo,hs for cs,cc.  New suffix for cache
 878         bypass.
 879         (arc_opcode_init_tables): New argument to indicate cpu type.
 880         (insert_reg): Handle predefined aux regs.
 881         (extract_reg): Likewise.
 882         (lookup_register): New fn.
 883         * arc-dis.c (arc_condition_codes): Deleted.
 884         (print_insn_arc): Handle insns with 32 bit immediate constants better.
 885         Clean up modifier handling.  Handle predefined aux regs.
 886 end-sanitize-arc
 887
 888 Thu Dec  8 18:23:31 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
 889
 890         * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
 891         print something for reserved opcode values, even if it won't
 892         assemble again.
 893
 894         * mips-dis.c (_print_insn_mips): When initializing, shift right
 895         and mask, to avoid sign extension problems on the Alpha.
 896
 897         * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
 898         control registers.
 899
 900 start-sanitize-arc
 901 Tue Nov 29 18:02:43 1994  Doug Evans  <dje@canuck.cygnus.com>
 902
 903         * configure.in: Add ARC support.
 904         * disassemble.c: Likewise.
 905         * arc-dis.c, arc-opc.c: New files.
 906 end-sanitize-arc
 907
 908 Wed Nov 23 22:34:51 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
 909
 910         * sh-opc.h (mov.l gbr): Get direction right.
 911         * sh-dis.c (print_insn_shx): New function.
 912         (print_insn_shl, print_insn_sh): Call print_insn_shx to
 913         print opcodes with right byte order.
 914
 915 Thu Nov  3 19:32:22 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
 916
 917         * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
 918         to avoid conflicts with getopt.
 919
 920 Mon Oct 31 18:48:10 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 921
 922         * hppa-dis.c (print_insn_hppa): Read the instruction using
 923         bfd_getb32, so that it works on a little endian or 64 bit host.
 924         Remove unused local variable op.
 925
 926 Tue Oct 25 17:07:57 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 927
 928         * mips-opc.c: Use or instead of addu for pseudo-op move, since
 929         addu does not work correctly if -mips3.
 930
 931 Wed Oct 19 13:40:16 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 932
 933         * a29k-dis.c (print_special): Add special register names defined
 934         on 29030, 29040 and 29050.
 935         (print_insn): Handle new operand type 'I'.
 936
 937 Wed Oct 12 11:59:55 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 938
 939         * Makefile.in (INSTALL): Use top level install.sh script.
 940
 941 Wed Oct  5 19:16:29 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 942
 943         * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
 944         that it works on a little endian host.
 945
 946 Tue Oct  4 12:14:21 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 947
 948         * configure.in: Use ${config_shell} when running config.bfd.
 949
 950 Wed Sep 21 18:49:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 951
 952         * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
 953
 954 Thu Sep 15 16:30:22 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 955
 956         * a29k-dis.c (print_insn): Print the opcode.
 957
 958 Wed Sep 14 17:52:14 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 959
 960         * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
 961
 962 Sun Sep 11 22:32:17 1994  Jeff Law  (law@snake.cs.utah.edu)
 963
 964         * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
 965
 966 Tue Sep  6 11:37:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 967
 968         * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
 969         which store a value into memory.
 970
 971 Sun Sep 04 17:58:10 1994  Richard Earnshaw (rwe@pegasus.esprit.ec.org)
 972
 973         * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
 974         * arm-dis.c, arm-opc.h: New files.
 975
 976 Fri Aug  5 14:00:05 1994  Stan Shebs  (shebs@andros.cygnus.com)
 977
 978         * Makefile.in (ns32k-dis.o): Add dependency.
 979         * ns32k-dis.c (print_insn_arg): Declare initialized local as
 980         string, not as array of chars.
 981
 982 Thu Jul 28 18:14:16 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
 983
 984         * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
 985
 986         * sparc-opc.c: Added sparclite extended FP operations, and
 987         versions of v9 impdep* instructions permitting specification of
 988         the OPF field.
 989
 990 Tue Jul 26 16:36:03 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
 991
 992         * i960-dis.c (reg_names): Now const.
 993         (struct sparse_tabent): New type, copied from array type in mem
 994         function.
 995         (ctrl): Local static array ctrl_tab now const.
 996         (cobr): Local static array cobr_tab now const.
 997         (mem): Local variables reg1, reg2, reg3 now point to const.  Local
 998         static variable mem_tab no longer explicitly initialized.  Changed
 999         mem_init to const array of struct sparse_tabent.
1000         (reg): Local static variable reg_tab no longer explicitly
1001         initialized.  Changed reg_init to const array of struct
1002         sparse_tabent.
1003         (ea): Local static array scale_tab now const.
1004
1005         start-sanitize-i960xl
1006         * i960-dis.c (reg): Added i960XL instructions to reg_init table.
1007         (REG_MAX): Updated.
1008         end-sanitize-i960xl
1009
1010 Tue Jul 19 21:00:00 1994  DJ Delorie (dj@ctron.com)
1011
1012         * configure.bat: the disassember needs to be enabled for
1013         "objdump -d" to work in djgpp.
1014
1015 Wed Jul 13 18:01:58 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
1016
1017         * ns32k-dis.c: Deleted all code in "#ifdef GDB".
1018         (invalid_float): Enabled general version, doesn't require running
1019         on ns32k host.  Changed to take char* argument, and test for
1020         explicitly specified sizes, instead of using sizeof() on host CPU
1021         types.
1022         (INVALID_FLOAT): Cast first argument.
1023         (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
1024         list_P032, list_M032): Now const.
1025         (optlist, list_search): Made appropriate arguments now point to
1026         const.
1027         (print_insn_arg): Changed static array of one-character-string
1028         pointers into a static const array of characters; fixed sprintf
1029         statement accordingly.
1030
1031 Sun Jul 10 00:27:47 1994  Ian Dall  (dall@hfrd.dsto.gov.au)
1032
1033         * opcodes/ns32k-dis.c: Semi-new file.  Had apparently been dropped
1034         from distribution. A ns32k-dis.c from a previous distribution has
1035         been brought up to date and supports the new interface.
1036
1037         * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
1038
1039         * configure.in: add bfd_ns32k_arch target support.
1040
1041         * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
1042         Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
1043
1044 Wed Jun 29 22:10:37 1994  Steve Chamberlain  (sac@cygnus.com)
1045
1046         * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
1047         disassembly right.
1048
1049 Tue Jun 28 13:22:06 1994  Stan Shebs  (shebs@andros.cygnus.com)
1050
1051         * h8300-dis.c, mips-dis.c: Don't use true and false.
1052
1053 Thu Jun 23 12:53:19 1994  David J. Mackenzie  (djm@rtl.cygnus.com)
1054
1055         * configure.in: Change --with-targets to --enable-targets.
1056
1057 Wed Jun 22 13:38:32 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
1058
1059         * mips-dis.c (_print_insn_mips): Build a static hash table mapping
1060         opcodes to the first instruction with that opcode, to speed
1061         disassembly of large files.  From ralphc@pyramid.com (Ralph
1062         Campbell).
1063
1064 Tue Jun  7 12:49:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1065
1066         * Makefile.in (mostlyclean): Fix typo (was mostyclean).
1067
1068 Wed May 11 22:32:00 1994  DJ Delorie (dj@ctron.com)
1069
1070         * configure.bat: update to latest makefile.in
1071
1072 Sat May  7 17:13:21 1994  Steve Chamberlain  (sac@cygnus.com)
1073
1074         * a29k-dis.c (print_insn): Print 'x' type operand in hex.
1075         * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
1076         * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
1077         slot insn is in a delay slot.
1078         * z8k-opc.h: (resflg): Fix patterns.
1079         * h8500-opc.h Fix CR insn patterns.
1080
1081 Fri May  6 14:34:46 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1082
1083         * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
1084         "cmpl" before POWER versions, so that gas -many uses them.
1085
1086 Thu Apr 28 18:32:36 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
1087
1088         * disassemble.c: New file.
1089         * Makefile.in (OFILES): Add disassemble.o.
1090         (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
1091         * configure.in: Define ARCHDEFS in Makefile.  Code taken from
1092         binutils/configure.in.
1093
1094         * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
1095         opcode being examined.
1096
1097 Thu Apr 21 17:08:40 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1098
1099         * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
1100         (insert_ral, insert_ram, insert_ras): New functions.
1101         (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
1102         RAS for store with update.
1103
1104 Sat Apr 16 23:41:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1105
1106         * ppc-opc.c (powerpc_opcodes): Correct fcir.  From David Edelsohn
1107         (edelsohn@npac.syr.edu).
1108
1109 Wed Apr  6 17:11:45 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1110
1111         * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
1112         immediate argument.
1113
1114 Mon Apr  4 16:30:46 1994  Doug Evans  (dje@canuck.cygnus.com)
1115
1116         * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
1117
1118 Mon Apr  4 13:22:00 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1119
1120         * ppc-opc.c (powerpc_operands): The signedp field has been
1121         removed, so don't initialize it.  Set the PPC_OPERAND_SIGNED flag
1122         instead.  Add new operand SISIGNOPT.
1123         (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
1124         Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
1125         * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
1126         than signedp field.
1127
1128 Wed Mar 30 00:31:49 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1129
1130         * i386-dis.c (struct private):  Renamed to dis_private. `private'
1131         is a reserved word for dynix cc.
1132
1133 Mon Mar 28 13:00:15 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1134
1135         * configure.in: Change error message to refer to bfd/config.bfd
1136         rather than bfd/configure.in.
1137
1138 Mon Mar 28 12:28:30 1994  David Edelsohn  (edelsohn@npac.syr.edu)
1139
1140         * ppc-opc.c: Define POWER2 as short alias flag.
1141         (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
1142         fsqrt.
1143
1144 Wed Mar 23 12:23:05 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1145
1146         * i960-dis.c (print_insn_i960): Don't read a second word for
1147         opcodes 0, 1, 2 and 3.
1148
1149 Wed Mar 16 15:37:58 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1150
1151         * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
1152
1153 Mon Mar 14 14:53:50 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1154
1155         * m68881-ext.c: Removed; no longer used.
1156         * Makefile.in: Changed accordingly.
1157
1158         * m68k-dis.c (ext_format_68881): Don't declare.
1159         (print_insn_m68k): If an instruction uses place 'i', it uses at
1160         least four fixed bytes.
1161         (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'.  For
1162         extended float, convert to double using floatformat_to_double, not
1163         ieee_extended_to_double, and fetch the data before converting it.
1164
1165 Tue Mar  8 18:12:25 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1166
1167         * mips-opc.c: It's sqrt.s, not sqrt.w.  From
1168         davidj@ICSI.Berkeley.EDU (David Johnson).
1169
1170 Tue Feb  8 16:55:27 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1171
1172         * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
1173         PowerPC uses bdnz[l][a].
1174
1175 Tue Feb  8 00:32:28 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1176
1177         * dis-buf.c, i386-dis.c:  Include sysdep.h.
1178
1179 Mon Feb  7 19:22:23 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1180
1181         * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
1182
1183         * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
1184         by Motorola PowerPC 601 with PPC_OPCODE_601.
1185         * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
1186         Disassemble Motorola PowerPC 601 instructions as well as normal
1187         PowerPC instructions.
1188
1189 Sun Feb  6 07:45:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1190
1191         * i960-dis.c (reg, mem): Just use a static array instead of
1192         calling xmalloc.
1193
1194 Sat Feb  5 00:04:02 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
1195
1196         * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
1197         condition name index if this is for a negated condition.
1198
1199         * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
1200         Floating point format for 'H' operand is backwards from normal
1201         case (0 == double, 1 == single).  For '4', '6', '7', '9', and '8'
1202         operands (fmpyadd and fmpysub), handle bizarre register
1203         translation correctly for single precision format.
1204
1205         * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
1206         or 'I' operands if the next format specifier is 'M' (fcmp
1207         condition completer).
1208
1209 Feb  4 23:38:03 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1210
1211         * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
1212         single number giving a bitmask for the MB and ME fields of an M
1213         form instruction.  Change NB to accept 32, and turn it into 0;
1214         also turn 0 into 32 when disassembling.  Seperated SH from NB.
1215         (insert_mbe, extract_mbe): New functions.
1216         (insert_nb, extract_nb): New functions.
1217         (SC_MASK): Mask out SA and LK bits.
1218         (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
1219         RA, SI.  Change "liu" and "cau" to use UI rather than SI.  Mark
1220         "bctr" and "bctrl" as accepted by POWER.  Change "rlwimi",
1221         "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
1222         "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
1223         use MBE rather than MB.  Add "mfmq" and "mtmq" POWER instructions.
1224         (powerpc_macros): Define table of macro definitions.
1225         (powerpc_num_macros): Define.
1226
1227         * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
1228         if PPC_OPERAND_NEXT is set.
1229
1230 Sat Jan 22 23:10:07 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1231
1232         * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
1233         char.  Retrieve contents using bfd_getl32 instead of shifting.
1234
1235 Fri Jan 21 19:01:39 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1236
1237         * ppc-opc.c: New file.  Opcode table for PowerPC, including
1238         opcodes for POWER (RS/6000).
1239         * ppc-dis.c: New file.  PowerPC and Power (RS/6000) disassembler.
1240         * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
1241         (CFILES): Add ppc-dis.c.
1242         (ppc-dis.o, ppc-opc.o): New targets.
1243         * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
1244
1245 Mon Jan 17 20:05:49 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
1246
1247         * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
1248         No space before 'u', 'f', or 'N'.
1249
1250 Sun Jan 16 14:20:16 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
1251
1252         * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
1253         farther than we should.
1254
1255         * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
1256
1257 Thu Jan  6 12:38:05 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
1258
1259         * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
1260
1261 Wed Jan  5 11:56:21 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
1262
1263         * i960-dis.c (print_insn_i960): Only read word2 if the instruction
1264         needs it, to prevent reading past the end of a section.
1265
1266 Wed Nov 17 17:20:12 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1267
1268         * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
1269         Removed t,A case for la; always use t,A(b) case.
1270
1271 Mon Nov  8 12:37:36 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1272
1273         From Ted Lemen <mellon@pepper.ncd.com>
1274         * mips-dis.c (print_insn_arg): Handle 'k'.
1275         * mips-opc.c: Make cache use k, not t.
1276
1277 Sun Nov  7 23:52:34 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1278
1279         * alpha-opc.h, alpha-dis.c (print_insn_alpha):  Add
1280         FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
1281         FLOAT_FORMAT_CODE to put out floating point register names.
1282
1283 Mon Nov  1 18:17:51 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1284
1285         * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
1286
1287 Thu Oct 28 17:42:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1288
1289         * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
1290
1291 Wed Oct 27 11:48:01 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1292
1293         * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
1294         larger than 32.  Moved dsxx32 variants first for disassembler.
1295
1296 Mon Oct 25 11:33:14 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
1297
1298         * z8kgen.c, z8k-opc.h: Add full lda information.
1299
1300 Tue Oct 19 12:39:25 1993  Jeffrey A Law  (law@cs.utah.edu)
1301
1302         * hppa-dis.c (print_insn_hppa): Do not emit a space after
1303         movb instructions.  Any necessary space will be emitted by
1304         the code to handle nullification completers.
1305
1306 Wed Oct 13 16:19:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1307
1308         * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
1309
1310 Fri Oct  8 02:34:21 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1311
1312         * alpha-opc.h:  Add ldl_l, fix typo for ldq_u.
1313         * alpha-dis.c (print_insn_alpha):  Add code for PAL_FORMAT_CODE.
1314
1315 Tue Oct  5 17:47:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1316
1317         * mips-opc.c: Correct lwu opcode value (book had it wrong).
1318
1319 Thu Sep 30 11:26:18 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
1320
1321         * z8k-dis.c (FETCH_DATA): get just the right amount of data.
1322         (unpack_instr): Cope with ARG_IMM4M1 type instructions.
1323
1324 Wed Sep 29 16:24:49 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
1325
1326         * m88k-dis.c (m88kdis): comment change.  Remove space after
1327           printing mnemonic.
1328           (printop): handle new arg types DEC and XREG for m88110.
1329
1330 Tue Sep 28 19:20:16 1993  Jeffrey A Law (law@snake.cs.utah.edu)
1331
1332         * hppa-dis.c (print_insn_hppa): Handle 'z' operand
1333         type for absolute branch addresses.  Delete special
1334         "ble" and "be" code in 'W' operand code.
1335
1336 Fri Sep 24 14:08:33 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1337
1338         * mips-opc.c: Set hazard information correctly for branch
1339         likely instructions.
1340
1341 Fri Sep 17 04:41:17 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1342
1343         * alpha-dis.c (print_insn_alpha), alpha-opc.h:  Fix bugs, use
1344         info->fprintf_func for printing and info->print_address_func for
1345         address output.
1346
1347 Wed Sep 15 12:12:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1348
1349         * mips-opc.c: Set INSN_TRAP for tXX instructions.
1350
1351 Thu Sep  9 10:11:27 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1352
1353         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
1354         Corrected second case of "b" for disassembler.
1355
1356 Tue Sep  7 14:25:15 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1357
1358         * mips-dis.c, m88k-dis.c: Don't include libbfd.h.  Changed calls
1359         to BFD swapping routines to correspond to BFD name changes.
1360
1361 Thu Sep  2 10:35:25 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1362
1363         * mips-opc.c: Change div machine instruction to be z,s,t rather
1364         than s,t.  Change div macro to be d,v,t rather than d,s,t.
1365         Likewise for divu, ddiv, ddivu.  Added z,s,t case for drem, dremu,
1366         rem and remu which generates only the corresponding div
1367         instruction.  This is for compatibility with the MIPS assembler,
1368         which only generates the simple machine instruction when an
1369         explicit destination of $0 is used.
1370         * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
1371
1372 Thu Aug 26 17:41:44 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1373
1374         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
1375         WR_31 hazard for bal, bgezal, bltzal.
1376
1377 Thu Aug 26 17:20:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1378
1379         * hppa-dis.c (print_insn_hppa): Use print function
1380         from within the disassemble_info, not fprintf_filtered.
1381
1382 Wed Aug 25 13:51:40 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1383
1384         * hppa-dis.c (print_insn_hppa): Handle '|' like '>'.  (From Jeff
1385         Law, law@cs.utah.edu.)
1386
1387 Mon Aug 23 12:44:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1388
1389         * mips-opc.c ("absu"): Removed.
1390         ("dabs"): Added.
1391
1392 Fri Aug 20 10:52:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1393
1394         * mips-opc.c: Added r6000 and r4000 instructions and macros.
1395         Changed hazard information to distinguish between memory load
1396         delays and coprocessor load delays.
1397
1398 Wed Aug 18 15:39:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1399
1400         * mips-opc.c: li.d uses "T,L", not "S,F".  Added li.s.
1401
1402 Tue Aug 17 09:44:42 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
1403
1404         * configure.in: Don't pass cpu to config.bfd.
1405
1406 Tue Aug 17 12:23:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1407
1408         * m88k-dis.c (m88kdis): Make class unsigned.
1409
1410 Thu Aug 12 15:08:18 1993  Ian Lance Taylor  (ian@cygnus.com)
1411
1412         * alpha-dis.c (print_insn_alpha): One branch format case was
1413         missing the instruction name.
1414
1415 Wed Aug 11 19:29:39 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
1416
1417         * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
1418         Add the arch-specific auxiliary files.
1419         (OFILES): Remove the arch-specific auxiliary files
1420         and use BFD_MACHINES instead of DIS_LIBS.
1421         * configure.in: Set BFD_MACHINES based on --with-targets option.
1422
1423 Thu Aug 12 12:04:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1424
1425         * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b).  Similarly
1426         for swc1.
1427
1428 Sun Aug  8 15:09:30 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1429
1430         * sparc-opc.c: Change CONST to const to deal with gcc
1431         -Dconst=__const -traditional.
1432
1433 Fri Aug  6 10:58:55 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1434
1435         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
1436         coprocessor instructions out of #if 0, and made them use new
1437         argument type "C".
1438
1439 Thu Aug  5 17:11:06 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1440
1441         * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
1442
1443 Fri Jul 30 18:48:15 1993  John Gilmore  (gnu@cygnus.com)
1444
1445         * sparc-opc.c:  Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
1446         instruction, for use by the disassembler.
1447
1448         * sparc-dis.c (SEX):  Add sign extension macro.  Replace many
1449         hand-coded sign extensions that depended on 32-bit host ints.
1450         FIXME, we still depend on big-endian host bitfield ordering.
1451         (sparc_print_insn):  Set the insn_info_valid field, and the
1452         other fields that describe the instruction being printed.
1453
1454 Tue Jul 27 17:04:58 1993  Jim Wilson  (wilson@sphagnum.cygnus.com)
1455
1456         * sparc-opc.c (call): Accept all 6 addressing modes valid for
1457         `jmp' instead of just one of them.
1458
1459 Wed Jul 21 11:43:32 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
1460
1461         * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
1462         (fput_fp_reg_r): Renamed from fput_reg_r.
1463         (fput_fp_reg): New function.
1464         (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
1465
1466         * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
1467
1468         * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
1469
1470 Mon Jul 19 13:52:21 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
1471
1472         * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
1473
1474         * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
1475         don't output a space.
1476
1477         * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
1478
1479 Sun Jul 18 16:30:02 1993  Jim Kingdon  (kingdon@rtl.cygnus.com)
1480
1481         * mips-opc.c: New file, containing opcode table from
1482         ../include/opcode/mips.h.
1483         * Makefile.in: Add it.
1484
1485 Thu Jul 15 12:37:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1486
1487         * m88k-dis.c: New file, moved in from gdb and changed to use the
1488         new dis-asm.h disassembler interface.
1489         * Makefile.in (DIS_LIBS): Added m88k-dis.o.
1490         (m88k-dis.o): New target.
1491
1492 Tue Jul 13 10:04:16 1993  Ian Lance Taylor  (ian@cygnus.com)
1493
1494         * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
1495         argument string const char * to correspond to opcode/mips.h.
1496
1497 Tue Jul  6 15:18:37 1993  Ian Lance Taylor  (ian@cygnus.com)
1498
1499         * mips-dis.c: Updated to account for name changes in new version
1500         of opcode/mips.h.
1501         * Makefile.in: Added header file dependencies.
1502
1503 Sat Jul  3 23:47:56 1993  Doug Evans  (dje@canuck.cygnus.com)
1504
1505         * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
1506
1507 Thu Jul  1 12:23:38 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1508
1509         * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
1510         extend, rather than shifts.
1511
1512 Sun Jun 20 20:56:56 1993  Ken Raeburn  (raeburn@poseidon.cygnus.com)
1513
1514         * Makefile.in: Undo 15 June change.
1515
1516 Fri Jun 18 14:15:15 1993  Per Bothner  (bothner@deneb.cygnus.com)
1517
1518         * m68k-dis.c (print_insn_arg):  Change return value to byte count
1519         or error code.
1520         * m68k-dis.c:  Re-write to detect invalid operands before
1521         printing anything, so we can handle this the same way we
1522         handle invalid opcodes.
1523
1524 Thu Jun 17 15:01:36 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
1525
1526         * sh-dis.c, sh-opc.h: Understand some more opcodes.
1527
1528 Wed Jun 16 13:48:05 1993  Ian Lance Taylor  (ian@cygnus.com)
1529
1530         * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
1531         header files.
1532
1533 Tue Jun 15 21:45:26 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1534
1535         * sparc-dis.c: Don't declare qsort, since sysdep.h might.
1536
1537         * configure.in: Do make sysdep.h link.
1538         * Makefile.in: Search ../include.  Don't search ../bfd.
1539
1540 Tue Jun 15 13:36:10 1993  Stu Grossman  (grossman@cygnus.com)
1541
1542         Changes from Jeff Law, law@cs.utah.edu:
1543         * hppa-dis.c: Fix typo.  'a' and 'd' were reversed.
1544         Do not print a space before the completers specified by
1545         'a' and 'd'.
1546
1547 Fri Jun 11 18:40:21 1993  Ken Raeburn  (raeburn@cygnus.com)
1548
1549         * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
1550         defined, since gdb has been fixed.
1551
1552         Changes from Jeff Law, law@cs.utah.edu:
1553         * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
1554         fput_reg_r, fput_creg, fput_const, and fputs_filtered should
1555         be a *disassemble_info, not a *FILE.
1556         * hppa-dis.c: Support 'd', '!', and 'a'.
1557         * hppa-dis.c: Support 's' to extract a 2 bit space register.
1558         * hppa-dis.c: Delete cases which are no longer needed.
1559
1560 Fri Jun 11 07:53:48 1993  Jim Kingdon  (kingdon@cygnus.com)
1561
1562         * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
1563
1564 Tue Jun  8 12:25:01 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
1565
1566         * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
1567         H8/300-H opcodes.
1568
1569 Mon Jun  7 12:58:49 1993  Per Bothner  (bothner@rtl.cygnus.com)
1570
1571         * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
1572         * configure.in:  No longer need to configure to get sysdep.h.
1573
1574 Thu Jun  3 15:56:49 1993  Stu Grossman  (grossman@cygnus.com)
1575
1576         * Patches from Jeffrey Law <law@cs.utah.edu>.
1577         * hppa-dis.c: Support 'I', 'J', and 'K' in output
1578         templates for 1.1 FP computational instructions.
1579
1580 Tue May 25 13:05:48 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1581
1582         * h8500-dis.c (print_insn_h8500): Address argument is type
1583         bfd_vma.
1584         * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
1585         Ditto.
1586
1587         * h8500-opc.h (addr_class_type): No comma at end of enumerator.
1588         * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
1589
1590         * sparc-dis.c (compare_opcodes): Move static declaration to
1591         top-level.
1592
1593 Fri May 21 14:17:37 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1594
1595         * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
1596         instruction, remove unimp hack from 'l' argument.
1597
1598 Wed May 19 15:35:54 1993  Stu Grossman  (grossman@cygnus.com)
1599
1600         * z8k-dis.c (fetch_data):  Use unsigned char to make ancient gcc's
1601         happy.
1602
1603 Fri May 14 15:22:46 1993  Ian Lance Taylor  (ian@cygnus.com)
1604
1605         * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
1606         * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
1607         instructions.
1608
1609 Fri May 14 00:09:14 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1610
1611         * hppa-dis.c: Include dis-asm.h before sysdep.h.  Changed some
1612         arrays of string pointers to 2-d arrays of chars, to save
1613         space.
1614
1615 Thu May  6 20:51:17 1993  Fred Fish  (fnf@cygnus.com)
1616
1617         * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
1618         Cast second arg to read_memory_func to "bfd_byte *", as necessary.
1619
1620 Tue May  4 20:31:10 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1621
1622         * hppa-dis.c: New file from Utah, adapted to new disassembler
1623         calling interface.
1624         * Makefile.in: Include it.
1625
1626 Mon Apr 26 18:17:42 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1627
1628         * sh-dis.c, sh-opc.h: New files.
1629
1630 Fri Apr 23 18:51:22 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1631
1632         * alpha-dis.c, alpha-opc.h: New files.
1633
1634 Tue Apr  6 12:54:08 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1635
1636         * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
1637         value.
1638
1639 Mon Apr  5 17:37:37 1993  John Gilmore  (gnu@cygnus.com)
1640
1641         * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
1642
1643 Fri Apr  2 07:24:27 1993  Ian Lance Taylor  (ian@cygnus.com)
1644
1645         * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
1646         const.
1647
1648 Thu Apr  1 11:20:43 1993  Jim Kingdon  (kingdon@cygnus.com)
1649
1650         * sparc-dis.c: Use fprintf_func a few places where I forgot,
1651         and double percent signs a few places.
1652
1653         * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
1654
1655         * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
1656         Use info->print_address_func not print_address.
1657
1658         * dis-buf.c (generic_print_address): New function.
1659
1660 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1661
1662         * Makefile.in: Add sparc-dis.c.
1663         sparc-dis.c: New file, merges binutils and gdb versions as follows:
1664         From GDB:
1665             Add `add' instruction to the set that get checked
1666             for a preceding `sethi' in order to print an absolute address.
1667             * (print_insn):  Disassembly prefers real instructions.
1668             (is_delayed_branch):  Speed up.
1669             * sparc-opcode.h: Add ALIAS bit to aliases.  Fix up opcode tables.
1670             Still missing some float ops, and needs testing.
1671             * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
1672             F_ALIAS.  Use printf, not fprintf, when not passing a file
1673             pointer...
1674             (compare_opcodes): Check that identical instructions have
1675             identical opcodes, complain otherwise.
1676         From binutils:
1677             * New 'm' arg.
1678             * Include reg_names.
1679         From neither:
1680             Use dis-asm.h/read_memory_func interface.
1681
1682 Wed Mar 31 20:49:06 1993  K. Richard Pixley  (rich@rtl.cygnus.com)
1683
1684         * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
1685           deliberately return non-zero to setjmp from longjmp.  Otherwise
1686           this code fails to compile.
1687
1688 Wed Mar 31 17:04:31 1993  Stu Grossman  (grossman@cygnus.com)
1689
1690         * m68k-dis.c:  Fix prototype for fetch_arg().
1691
1692 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1693
1694         * dis-buf.c: New file, for new read_memory_func interface.
1695         Makefile.in (OFILES): Include it.
1696         m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
1697         Use new read_memory_func interface.
1698
1699 Mon Mar 29 14:02:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1700
1701         * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
1702         * h8500-opc.h: Fix couple of opcodes.
1703
1704 Wed Mar 24 02:03:36 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
1705
1706         * Makefile.in: add dvi & installcheck targets
1707
1708 Mon Mar 22 18:55:04 1993  John Gilmore  (gnu@cygnus.com)
1709
1710         * Makefile.in:  Update for h8500-dis.c.
1711
1712 Fri Mar 19 14:27:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1713
1714         * h8500-dis.c, h8500-opc.h: New files
1715
1716 Thu Mar 18 14:12:37 1993  Per Bothner  (bothner@rtl.cygnus.com)
1717
1718         * mips-dis.c, z8k-dis.c:  Converted to use interface defined in
1719         ../include/dis-asm.h.
1720         * m68k-dis.c:  New file (merge of ../binutils/m68k-pinsn.c
1721         and ../gdb/m68k-pinsn.c).
1722         * i386-dis.c:  New file (merge of ../binutils/i386-pinsn.c
1723         and ../gdb/i386-pinsn.c).
1724         * m68881-ext.c:  New file.  Moved definition of
1725         ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
1726         * Makefile.in:  Adjust for new files.
1727         * i386-dis.c:  Patches from John Hassey (hassey@dg-rtp.dg.com).
1728         * m68k-dis.c:  Recognize '9' placement code, so (say) pflush
1729         can be dis-assembled.
1730
1731 Wed Feb 17 09:19:47 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1732
1733         * mips-dis.c (print_insn_arg): Now returns void.
1734
1735 Mon Jan 11 16:09:16 1993  Fred Fish  (fnf@cygnus.com)
1736
1737         * mips-dis.c (ansidecl.h):  Include for benefit of sysdep.h
1738         files that use the macros.
1739
1740 Thu Jan  7 13:15:17 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1741
1742         * mips-dis.c: New file, from gdb/mips-pinsn.c.
1743         * Makefile.in (DIS_LIBS): Added mips-dis.o.
1744         (CFILES): Added mips-dis.c.
1745
1746 Thu Jan  7 07:36:33 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1747
1748         * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
1749         * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
1750
1751 Tue Dec 22 15:42:44 1992  Per Bothner  (bothner@rtl.cygnus.com)
1752
1753         * Makefile.in:  Improve *clean rules.
1754         * configure.in:  Allow a default host.
1755
1756 Tue Nov 17 19:53:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1757
1758         * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
1759         files include other sysdep files
1760
1761 Thu Nov 12 16:10:37 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1762
1763         * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
1764
1765 Fri Oct  9 04:56:05 1992  John Gilmore  (gnu@cygnus.com)
1766
1767         * configure.in:  For host support, use ../bfd/configure.host
1768         so it stays in sync with the ../bfd/hosts database.
1769
1770 Thu Oct  1 23:38:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1771
1772         * configure.in: use cpu-vendor-os triple instead of nested cases
1773
1774 Wed Sep 30 16:09:20 1992  Michael Werner  (mtw@cygnus.com)
1775
1776         * z8k-dis.c (unparse_instr): fix bug where opcode returned was
1777         *always* the wrong one.
1778
1779 Wed Sep 30 07:42:17 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1780
1781         * z8kgen.c: added copyright info
1782
1783 Tue Sep 29 12:20:21 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1784
1785         * z8k-dis.c (unparse_instr): prettier tabs
1786         * z8kgen.c -> z8k-opc.h: bug fixes in tables
1787
1788 Fri Sep 25 12:50:32 1992  Stu Grossman  (grossman at cygnus.com)
1789
1790         * configure.in:  Add ncr* configuration.
1791         * z8k-dis.c (struct instr_data_s):  Make instr_asmsrc char to make
1792         picayune ANSI compilers happy.
1793
1794 Sep 20 08:50:55 1992  Fred Fish  (fnf@cygnus.com)
1795
1796         * configure.in (i386):  Make i386 and i486 synonymous for now.
1797         * configure.in (i[34]86-*-sysv4):  Add my_host definition.
1798
1799 Fri Sep 18 17:01:23 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1800
1801         * Makefile.in (install): Fix typo.
1802
1803 Fri Sep 18 02:04:24 1992  John Gilmore  (gnu@cygnus.com)
1804
1805         * Makefile.in (make):  Remove obsolete crud.
1806         (sparc-opc.o):  Avoid Sun Make VPATH bug.
1807
1808 Tue Sep  8 17:29:27 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
1809
1810         * Makefile.in: since there are no SUBDIRS, remove rule and
1811         references of subdir_do.
1812
1813 Tue Sep  8 17:02:58 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1814
1815         * Makefile.in (install): Get the library name right here too.
1816         Don't install bfd.h, since it's unrelated to this library.  No
1817         subdirs to recurse into, either.
1818         (CFILES): The source file has a .c suffix, not .o.
1819
1820         * sparc-opc.c: New file, moved from BFD.
1821         * Makefile.in (OFILES): Build it.
1822
1823 Thu Sep  3 16:59:20 1992  Michael Werner  (mtw@cygnus.com)
1824
1825         * z8k-dis.c: fixed forward refferences of some declarations.
1826
1827 Mon Aug 31 16:09:45 1992  Michael Werner  (mtw@cygnus.com)
1828
1829         * Makefile.in: get the name of the library right
1830
1831 Mon Aug 31 13:47:35 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1832
1833         * z8k-dis.c: knows how to disassemble z8k stuff
1834         * z8k-opc.h: new file full of z8000 opcodes
1835
1836 \f
1837 Local Variables:
1838 version-control: never
1839 End: