2 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
4 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
5 * configure: Regenerate with autoconf.
6 * tic80-dis.c: Add file.
7 * tic80-opc.c: Add file.
11 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
13 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
16 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
18 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
19 (mn10200_opcodes): Use it for some logicals and btst insns.
20 Add "break" and "trap" instructions.
22 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
24 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
26 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
28 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
29 relative load or add now depends upon whether the instruction is
32 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
34 * mn10200-dis.c: Finish writing disassembler.
35 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
36 Fix mask for "jmp (an)".
38 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
39 handle endianness issues for mn10300.
41 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
43 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
45 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
46 instruction. Fix opcode field for "movb (imm24),dn".
48 * mn10200-opc.c (mn10200_operands): Fix insertion position
51 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
53 * mn10200-opc.c: Create mn10200 opcode table.
54 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
55 but moving along nicely.
57 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
59 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
61 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
63 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
64 specifiers for fmovem* instructions.
66 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
68 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
70 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
72 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
75 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
77 * mn10300-opc.c: Add some comments explaining the various
80 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
82 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
84 * m68k-dis.c (print_insn_arg): Handle new < and > operand
87 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
88 operand specifiers in fmovm* instructions.
90 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
92 * ppc-opc.c (insert_li): Give an error if the offset has the two
93 least significant bits set.
95 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
97 * mips-dis.c (print_insn_mips16): Separate the instruction from
98 the arguments with a tab, not a space.
100 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
102 * mn10300-dis.c (disasemble): Finish conversion to '$' as
105 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
108 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
110 * configure: Rebuild with autoconf 2.12.
112 Add support for mips16 (16 bit MIPS implementation):
113 * mips16-opc.c: New file.
114 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
115 (mips16_reg_names): New static array.
116 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
117 after seeing a 16 bit symbol.
118 (print_insn_little_mips): Likewise.
119 (print_insn_mips16): New static function.
120 (print_mips16_insn_arg): New static function.
121 * mips-opc.c: Add jalx instruction.
122 * Makefile.in (mips16-opc.o): New target.
123 * configure.in: Use mips16-opc.o for bfd_mips_arch.
124 * configure: Rebuild.
126 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
128 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
129 operand specifiers in *save, *restore and movem* instructions.
131 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
134 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
135 register operands for immediate arithmetic, not, neg, negx, and
136 set according to condition instructions.
138 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
139 specifier of the effective-address operand in immediate forms of
140 arithmetic instructions. The specifier for the immediate operand
141 notes how and where the constant will be stored.
143 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
145 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
148 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
151 * mn10300-dis.c (disassemble): Prefix registers with '%'.
153 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
155 * mn10300-dis.c (disassemble): Handle register lists.
157 * mn10300-opc.c: Fix handling of register list operand for
158 "call", "ret", and "rets" instructions.
160 * mn10300-dis.c (disassemble): Print PC-relative and memory
161 addresses symbolically if possible.
162 * mn10300-opc.c: Distinguish between absolute memory addresses,
163 pc-relative offsets & random immediates.
165 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
167 (disassemble): Handle SPLIT and EXTENDED operands.
169 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
171 * mn10300-dis.c: Rough cut at printing some operands.
173 * mn10300-dis.c: Start working on disassembler support.
174 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
176 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
178 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
181 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
183 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
186 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
188 * mn10300-opc.c (mn10300_opcodes): Demand parens around
189 register argument is calls and jmp instructions.
191 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
193 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
194 getx operand. Fix opcode for mulqu imm,dn.
196 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
198 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
199 in MN10300_OPERAND_SPLIT operands for how many bits
200 appear in the basic insn word. Add IMM32_HIGH24,
201 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
202 (mn10300_opcodes): Use new operands as needed.
204 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
205 for bset, bclr, btst instructions.
206 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
208 * mn10300-opc.c (mn10300_operands): Remove many redundant
209 operands. Update opcode table as appropriate.
210 (IMM32): Add MN10300_OPERAND_SPLIT flag.
211 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
213 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
215 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
216 operands (for indexed load/stores). Fix bitpos for DI
217 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
218 few instructions that insert immediates/displacements in the
219 middle of the instruction. Add IMM8E for 8 bit immediate in
220 the extended part of an instruction.
221 (mn10300_operands): Use new opcodes as appropriate.
224 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
226 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
227 sequential so the assembler never parallelizes it with
231 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
233 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
234 a data/address register that appears in register field 0
235 and register field 1.
236 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
238 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
240 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
241 standard disassembly.
243 * alpha-opc.c (alpha_operands): Rearrange flags slot.
244 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
245 Recategorize PALcode instructions.
248 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
250 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
253 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
255 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
256 there are no operand types.
259 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
261 * v850-opc.c (D9_RELAX): Renamed from D9, all references
263 (v850_operands): Make sure D22 immediately follows D9_RELAX.
266 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
268 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
271 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
273 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
274 and sst.w instructions.
276 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
280 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
282 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
285 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
287 * ppc-opc.c (PPCPWR2): Define.
288 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
291 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
293 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
294 field for movhu instruction.
297 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
298 cast value to "long" not "signed long" to keep hpux10
302 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
304 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
307 * mn10300-opc.c (FMT*): Remove definitions.
309 * mn10300-opc.c (mn10300_opcodes): Fix destination register
310 for shift-by-register opcodes.
312 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
313 into [AD][MN][01] for encoding the position of the register
316 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
318 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
319 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
321 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
323 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
324 Fix various typos. Add "PAREN" operand.
326 (mn10300_opcodes): Surround all memory addresses with "PAREN"
327 operands. Fix several typos.
329 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
332 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
334 * mn10300-opc.c (FMT_XX): Renumber starting at one.
335 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
337 (mn10300_opcodes): Break opcode format out into its own field.
338 Update many operand fields to deal with signed vs unsigned
339 issues. Fix one or two typos in the "mov" instruction
340 opcode, mask and/or operand fields.
342 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
344 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
347 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
349 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
350 all opcodes. Very rough cut at operands for all opcodes.
352 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
355 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
357 * mn10200-opc.c, mn10300-opc.c: New files.
358 * mn10200-dis.c, mn10300-dis.c: New files.
359 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
360 * disassemble.c: Break mn10x00 support into 10200 and 10300
362 * configure.in: Likewise.
363 * configure: Rebuilt.
365 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
367 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
369 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
371 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
373 * disassemble (ARCH_mn10x00): Define.
374 (disassembler): Handle bfd_arch_mn10x00.
375 * configure.in: Recognize bfd_mn10x00_arch.
376 * configure: Rebuilt.
378 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
380 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
381 accordingly. Don't declare functions using op_rtn.
384 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
386 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
387 params to be more standard.
388 * (disassemble): Print absolute addresses and symbolic names for
389 branch and jump targets.
390 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
392 * (v850_opcodes): Add breakpoint insn.
395 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
397 * m68k-opc.c: Move the fmovemx data register cases before the
398 other cases, so that they get recognized before the data register
399 does gets treated as a degenerate register list.
401 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
403 * mips-opc.c: Add a case for "div" and "divu" with two registers
404 and a destination of $0.
406 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
408 * mips-dis.c (print_insn_arg): Add prototype.
409 (_print_insn_mips): Ditto.
411 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
413 * mips-dis.c (print_insn_arg): Print condition code registers as
416 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
418 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
421 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
423 * v850-dis.c (disassemble): Make static. Provide prototype.
425 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
427 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
430 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
432 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
433 ']' characters into the output stream.
434 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
435 Add "memop" field to all opcodes (for the disassembler).
436 Reorder opcodes so that "nop" comes before "mov" and "jr"
439 * v850-dis.c (print_insn_v850): Fix typo in last change.
441 * v850-dis.c (print_insn_v850): Properly handle disassembling
442 a two byte insn at the end of a memory region when the memory
443 region's size is only two byte aligned.
445 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
447 * v850-dis.c (v850_reg_names): Define.
448 (v850_sreg_names, v850_cc_names): Likewise.
449 (disassemble): Very rough cut at printing operands (unformatted).
451 * v850-opc.c (BOP_MASK): Fix.
452 (v850_opcodes): Fix mask for jarl and jr.
454 * v850-dis.c: New file. Skeleton for disassembler support.
455 * Makefile.in Remove v850 references, they're not needed here
456 and they weren't being sanitized away.
457 * configure.in: Add v850-dis.o when building v850 toolchains.
458 * configure: Rebuilt.
459 * disassemble.c (disassembler): Call v850 disassembler.
461 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
462 (insert_d8_6, extract_d8_6): New functions.
463 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
464 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
466 (IF4A, IF4B): Use "D7" instead of "D7S".
467 (IF4C, IF4D): Use "D8_7" instead of "D8".
468 (IF4E, IF4F): New. Use "D8_6".
469 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
470 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
472 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
473 (v850_operands): Change D16 to D16_15, use special insert/extract
474 routines. New new D16 that uses the generic insert/extract code.
475 (IF7A, IF7B): Use D16_15.
476 (IF7C, IF7D): New. Use D16.
477 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
479 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
480 message. Issue an error if the branch offset is odd.
482 * v850-opc.c: Add notes about needing special insert/extract
483 for all the load/store insns, except "ld.b" and "st.b".
485 * v850-opc.c (insert_d22, extract_d22): New functions.
486 (v850_operands): Use insert_d22 and extract_d22 for
488 (insert_d9): Fix range check.
490 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
492 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
493 and set bits field to D9 and D22 operands.
495 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
497 * v850-opc.c (v850_operands): Define SR2 operand.
498 (v850_opcodes): "ldsr" uses R1,SR2.
500 * v850-opc.c (v850_opcodes): Fix opcode specs for
501 sld.w, sst.b, sst.h, sst.w, and nop.
503 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
505 * v850-opc.c (v850_opcodes): Add null opcode to mark the
506 end of the opcode table.
510 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
512 * d10v-opc.c (pre_defined_registers): Added register pairs,
513 "r0-r1", "r2-r3", etc.
517 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
519 * v850-opc.c (v850_operands): Make I16 be a signed operand.
520 Create I16U for an unsigned 16bit mmediate operand.
521 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
523 * v850-opc.c (v850_operands): Define EP operand.
524 (IF4A, IF4B, IF4C, IF4D): Use EP.
526 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
527 with immediate operand, "movhi". Tweak "ldsr".
529 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
530 correct. Get sld.[bhw] and sst.[bhw] closer.
532 * v850-opc.c (v850_operands): "not" is a two byte insn
534 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
536 * v850-opc.c (v850_operands): D16 inserts at offset 16!
538 * v850-opc.c (two): Get order of words correct.
540 * v850-opc.c (v850_operands): I16 inserts at offset 16!
542 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
543 register source and destination operands.
544 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
546 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
547 same thinko in "trap" opcode.
549 * v850-opc.c (v850_opcodes): Add initializer for size field
552 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
553 Add D8 for 8-bit unsigned field in short load/store insns.
554 (IF4A, IF4D): These both need two registers.
555 (IF4C, IF4D): Define. Use 8-bit unsigned field.
556 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
557 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
558 for "ldsr" and "stsr".
559 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
562 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
563 short store word (sst.w).
565 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
567 * v850-opc.c (v850_operands): Added insert and extract fields,
568 pointers to functions that handle unusual operand encodings.
570 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
572 * v850-opc.c (v850_opcodes): Enable "trap".
574 * v850-opc.c (v850_opcodes): Fix order of displacement
575 and register for "set1", "clr1", "not1", and "tst1".
577 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
579 * v850-opc.c (v850_operands): Add "B3" support.
580 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
583 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
585 * v850-opc.c: Close unterminated comment.
587 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
589 * v850-opc.c (v850_operands): Add flags field.
590 (v850_opcodes): add move opcodes.
592 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
594 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
595 * configure: (bfd_v850v_arch) Add new case.
596 * configure.in: (bfd_v850_arch) Add new case.
597 * v850-opc.c: New file.
600 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
602 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
605 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
607 * d10v-opc.c: Add additional information to the opcode
608 table to help determinine which instructions can be done
612 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
614 * mpw-make.sed: Update editing of include pathnames to be
617 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
619 * arm-opc.h: Added "bx" instruction definition.
621 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
623 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
626 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
628 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
630 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
632 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
635 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
637 * makefile.vms: Update for alpha-opc changes.
639 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
641 * i386-dis.c (print_insn_i386): Actually return the correct value.
642 (ONE, OP_ONE): #ifdef out; not used.
645 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
647 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
648 Changed subi operand type to treat 0 as 16.
651 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
653 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
656 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
658 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
659 memory transfer instructions. Add new format string entries %h and %s.
660 * arm-dis.c: (print_insn_arm): Provide decoding of the new
664 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
666 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
667 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
670 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
672 * alpha-dis.c (print_insn_alpha_osf): Remove.
673 (print_insn_alpha_vms): Remove.
674 (print_insn_alpha): Make globally visible. Chose the register
675 names based on info->flavour.
676 * disassemble.c: Always return print_insn_alpha for the alpha.
679 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
681 * d10v-dis.c (dis_long): Handle unknown opcodes.
683 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
685 * d10v-opc.c: Changes to support signed and unsigned numbers.
686 All instructions with the same name that have long and short forms
687 now end in ".l" or ".s". Divs added.
688 * d10v-dis.c: Changes to support signed and unsigned numbers.
690 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
692 * d10v-dis.c: Change all functions to use info->print_address_func.
695 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
697 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
698 move ccr/sr insns more strict so that the disassembler only
699 selects them when the addressing mode is data register.
702 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
703 * d10v-opc.c (pre_defined_registers): Declare.
704 * d10v-dis.c (print_operand): Now uses pre_defined_registers
705 to pick a better name for the registers.
708 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
710 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
711 operands for fexpand and fpmerge. From Christian Kuehnke
712 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
714 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
716 * alpha-dis.c (print_insn_alpha): No longer the user-visible
717 print routine. Take new regnames and cpumask arguments.
718 Kill the environment variable nonsense.
719 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
720 (print_insn_alpha_vms): New function. Do VMS style regnames.
721 * disassemble.c (disassembler): Test bfd flavour to pick
722 between OSF and VMS routines. Default to OSF.
724 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
726 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
727 * configure: Rebuild.
728 * Makefile.in (install): Use @INSTALL_SHLIB@.
731 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
733 * configure: (bfd_d10v_arch) Add new case.
734 * configure.in: (bfd_d10v_arch) Add new case.
735 * d10v-dis.c: New file.
736 * d10v-opc.c: New file.
737 * disassemble.c (disassembler) Add entry for d10v.
740 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
742 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
743 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
745 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
747 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
748 distinguish between variants of the instruction set.
749 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
750 distinguish between variants of the instruction set.
752 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
754 * i386-dis.c (print_insn_i8086): New routine to disassemble using
755 the 8086 instruction set.
756 * i386-dis.c: General cleanups. Make most things static. Add
757 prototypes. Get rid of static variables aflags and dflags. Pass
758 them as args (to almost everything).
760 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
762 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
764 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
766 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
767 if the next arg is marked with SRC_IN_DST. Gross.
769 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
770 we're looking for and find EXR.
772 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
773 if we're looking for KBIT and we don't find it.
775 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
778 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
779 3bit immediate operands.
781 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
783 * Released binutils 2.7.
785 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
786 <kkaempf@progis.ac-net.de>.
788 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
790 * alpha-opc.c: Correct second case of "mov" to use OPRL.
792 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
794 * sparc-dis.c (print_insn_sparclite): New routine to print
795 sparclite instructions.
797 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
799 * m68k-opc.c (m68k_opcodes): Add coldfire support.
801 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
803 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
804 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
805 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
807 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
809 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
810 Use autoconf-set values.
811 (docdir, oldincludedir): Removed.
812 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
814 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
816 * alpha-opc.c: New file.
817 * alpha-opc.h: Remove.
818 * alpha-dis.c: Complete rewrite to use new opcode table.
819 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
820 * configure: Rebuild with autoconf 2.10.
821 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
822 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
824 (alpha-opc.o): New target.
826 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
828 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
829 Set imm_added_to_rs1 even if the source and destination register
832 * sparc-opc.c: Add some two operand forms of the wr instruction.
834 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
836 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
839 * disassemble.c (disassembler): Handle H8/S.
840 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
842 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
844 * sparc-opc.c: Add beq/teq as aliases for be/te.
846 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
847 <sergei@msil.sps.mot.com>.
849 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
851 * makefile.vms: New file.
853 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
855 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
857 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
860 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
862 * i386-dis.c (OP_OFF): Call append_prefix.
864 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
866 * ppc-opc.c (instruction encoding macros): Add explicit casts to
867 unsigned long to silence a warning from the Solaris PowerPC
870 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
872 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
874 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
876 * sparc-dis.c (X_IMM,X_SIMM): New macros.
878 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
879 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
880 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
881 cpush, cpusha, cpull sparclet insns.
883 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
885 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
887 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
889 * sparc-opc.c: Set F_FBR on floating point branch instructions.
890 Set F_FLOAT on other floating point instructions.
892 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
894 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
896 (powerpc_opcodes): Add 860/821 specific SPRs.
898 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
900 * configure.in: Permit --enable-shared to specify a list of
901 directories. Set and substitute BFD_PICLIST.
902 * configure: Rebuild.
903 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
904 uses. Set to @BFD_PICLIST@.
906 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
908 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
909 not "abs", which may be needed for the absolute in something
910 like btst #0,@10:8. Print L_3 immediates separately from other
911 immediates. Change ABSMOV reference to ABS8MEM.
913 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
915 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
916 (current_arch_mask): New static global.
917 (compute_arch_mask): New static function.
918 (print_insn_sparc): Delete sparc_v9_p. New static local
919 current_mach. Resort opcode table if current_mach changes.
920 Generalize "insn not supported" test.
921 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
922 Delete test for v9/!v9.
923 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
925 (brfc): Split into CBR and FBR for coprocessor/fp branches.
926 (brfcx): Renamed to FBRX.
927 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
928 coprocessor mnemonics are not supported on the sparclet).
929 (condf): Renamed to CONDF.
930 (SLCBCC2): Delete F_ALIAS flag.
932 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
934 * sparc-opc.c (sparc_opcodes): rd must be 0 for
935 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
937 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
939 * Makefile.in (config.status): Depend upon BFD VERSION file, so
940 that the shared library version number is set correctly.
942 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
944 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
945 Miles Bader <miles@gnu.ai.mit.edu>.
946 * configure: Rebuild.
948 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
950 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
953 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
955 * configure: Rebuild with autoconf 2.8.
957 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
959 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
960 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
962 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
964 * configure.in: Don't set SHLIB or SHLINK to an empty string,
965 since they appear as targets in Makefile.in.
966 * configure: Rebuild.
968 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
970 * mpw-make.sed: Edit out shared library support bits.
972 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
974 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
975 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
976 (sparc_opcodes): Add sparclet insns.
977 (sparclet_cpreg_table): New static local.
978 (sparc_{encode,decode}_sparclet_cpreg): New functions.
979 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
981 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
983 * i386-dis.c (index16): New static variable.
984 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
986 (OP_indirE): Return result of OP_E.
987 (OP_E): Check for 16 bit addressing mode, and disassemble
988 correctly. Optimised 32 bit case a little. Don't print
989 "(base,index,scale)" when sib specifies only an offset.
991 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
993 * configure.in: Set and substitute SHLIB_DEP.
994 * configure: Rebuild.
995 * Makefile.in (SHLIB_DEP): New variable.
996 (LIBIBERTY_LISTS, BFD_LIST): New variables.
997 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
998 COMMON_SHLIB, add them to piclist with appropriate modifications.
999 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
1000 here: just use piclist.
1002 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
1004 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
1005 (print_insn_sparc): Rewrite v9/not-v9 tests.
1006 (compare_opcodes): Likewise.
1007 * sparc-opc.c (MASK_<ARCH>): Define.
1008 (v6,v7,v8,sparclite,v9,v9a): Redefine.
1009 (sparclet,v6notv9): Define.
1010 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
1011 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
1013 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
1015 * configure.in: Call AC_PROG_CC before configure.host.
1016 * configure: Rebuild.
1018 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
1020 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
1022 * i386-dis.c (onebyte_has_modrm): New static array.
1023 (twobyte_has_modrm): New static array.
1024 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
1026 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
1028 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
1031 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1033 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
1036 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
1038 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
1039 m68010up, not just m68020up | cpu32.
1041 * Makefile.in (SONAME): New variable.
1042 ($(SHLINK)): Make a link to the transformed name, as well.
1043 (stamp-tshlink): New target.
1044 (install): Skip stamp-tshlink during install.
1046 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
1048 * configure.in: Call AC_ARG_PROGRAM.
1049 * configure: Rebuild.
1050 * Makefile.in (program_transform_name): New variable.
1051 (install): Transform library name before installing it.
1053 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
1055 * i960-dis.c (mem): Add HX dcinva instruction.
1057 Support for building as a shared library, based on patches from
1058 Alan Modra <alan@spri.levels.unisa.edu.au>:
1059 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
1060 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
1061 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
1062 * configure: Rebuild.
1063 * Makefile.in (ALLLIBS): New variable.
1064 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
1065 (COMMON_SHLIB, SHLINK): New variables.
1066 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
1067 (STAGESTUFF): Remove variable.
1068 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
1069 (stamp-piclist, piclist): New targets.
1070 ($(SHLIB), $(SHLINK)): New targets.
1071 ($(OFILES)): Depend upon stamp-picdir.
1072 (disassemble.o): Build twice if PICFLAG is set.
1073 (MOSTLYCLEAN): Add pic/*.o.
1074 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
1075 (distclean): Remove pic and stamp-picdir.
1076 (install): Install shared libraries.
1077 (stamp-picdir): New target.
1079 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
1081 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
1082 Print unknown instruction as "unknown", rather than in hex.
1084 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
1086 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
1088 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
1090 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
1092 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
1094 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
1095 when necessary. From Ulrich Drepper
1096 <drepper@myware.rz.uni-karlsruhe.de>.
1098 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
1100 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
1101 sparc_num_opcodes. Update architecture enum values.
1102 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
1103 (sparc_opcode_lookup_arch): New function.
1104 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
1105 (sparc_opcodes): Add v9a shutdown insn.
1107 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
1109 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
1110 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
1112 (print_insn_sparc64): Deleted.
1113 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
1116 * sparc-opc.c (architecture_pname): Add v9a.
1118 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
1120 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
1121 incorrectly defined as 0x16 when it should be 0x15.
1122 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
1123 (alpha_insn_set): added cvtst and cvttq float ops. Also added
1124 excb (exception barrier) which is defined in the Alpha
1125 Architecture Handbook version 2.
1126 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
1127 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
1128 disassembled as or, for example.
1130 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
1132 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
1133 (_print_insn_mips): Change i from int to unsigned int.
1135 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
1137 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
1138 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
1140 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
1142 * i386-dis.c: Added Pentium Pro instructions.
1144 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1146 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
1149 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1151 * sh-opc.h (sh_nibble_type): Added REG_B.
1152 (sh_arg_type): Added A_REG_B.
1153 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
1155 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
1157 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
1159 * disassemble.c (disassembler): Use new bfd_big_endian macro.
1161 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
1163 * Makefile.in (distclean): Remove stamp-h. From Ronald
1164 F. Guilmette <rfg@monkeys.com>.
1166 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
1168 From David Mosberger-Tang <davidm@azstarnet.com>:
1169 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
1172 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1174 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
1175 (sh_table): Added many SH3 opcodes.
1176 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
1178 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1180 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
1181 (subco,subco.): Mark this PPC, not PPCCOM.
1183 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
1185 * configure: Rebuild with autoconf 2.7.
1187 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
1189 * configure: Rebuild with autoconf 2.6.
1191 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
1193 * configure.in: Sort list of architectures. Accept but do nothing
1194 for alliant, convex, pyramid, romp, and tahoe.
1196 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
1198 * a29k-dis.c (print_special): Change num to unsigned int.
1200 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
1202 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
1205 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
1207 * configure.in: Call AC_CHECK_PROG to find and cache AR.
1208 * configure: Rebuilt.
1210 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
1212 * configure.in: Add case for bfd_i860_arch.
1213 * configure: Rebuild.
1215 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
1217 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
1218 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
1219 (NEXTDOUBLE): Likewise.
1220 (print_insn_m68k): Don't match fmoveml if there is more than one
1221 register in the list.
1222 (print_insn_arg): Handle a place of '8' for a type of 'L'.
1224 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
1226 * m68k-opc.c: Use #W rather than #w.
1227 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
1229 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
1231 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
1232 and likewise for all the dbxx opcodes.
1234 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
1236 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
1238 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
1240 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
1241 the VR4100 specific instructions to the mips_opcodes structure.
1243 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
1245 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
1246 ugly Metrowerks bug in CW6, is fixed in CW7.
1248 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1250 * ppc-opc.c (whole file): Add flags for common/any support.
1252 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
1254 * Makefile.in (BISON): Remove macro.
1255 (FLAGS_TO_PASS): Remove BISON.
1257 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
1259 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1261 * m68k-dis.c (print_insn_m68k): Recognize all two-word
1262 instructions that take no args by looking at the match mask.
1263 (print_insn_arg): Always print "%" before register names.
1264 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
1265 [case '_']: Don't print "@#" before address.
1266 [case 'J']: Use "%s" as format string, not register name.
1267 [case 'B']: Treat place == 'C' like 'l' and 'L'.
1269 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
1271 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
1274 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
1276 From David Mosberger-Tang <davidm@azstarnet.com>
1278 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
1279 (alpha_insn_set): added definitions for VAX floating point
1280 instructions (Unix compilers don't generate these, but handcoded
1281 assembly might still use them).
1283 * alpha-dis.c (print_insn_alpha): added support for disassembling
1284 the miscellaneous instructions in the Alpha instruction set.
1286 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
1288 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
1289 no longer create sysdep.h, sed ppc-opc.c to work around a
1290 serious Metrowerks C bug.
1291 * mpw-make.in: Remove.
1292 * mpw-make.sed: New file, used by mpw-configure to edit
1293 Makefile.in into an MPW makefile.
1295 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
1297 * Makefile.in (maintainer-clean): New synonym for realclean.
1299 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
1301 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
1302 which use '0', '1', and '2' instead. Specify the proper size for
1303 a pmove immediate operand. Correct the pmovefd patterns to be
1304 moves to a register, not from a register.
1305 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
1307 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
1309 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
1310 %psr, %wim, %tbr as F_NOTV9.
1312 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
1314 * Makefile.in (Makefile): Just rebuild Makefile when running
1316 (config.h, stamp-h): New targets.
1317 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
1318 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
1319 rebuilding config.h.
1320 * configure: Rebuild.
1322 * mips-opc.c: Change unaligned loads and stores with "t,A"
1323 operands to use "t,A(b)".
1325 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1327 * sh-dis.c (print_insn_shx): Add F_FR0 support.
1329 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1331 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
1332 until 3 instead of until 2.
1334 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
1336 * Makefile.in (ALL_CFLAGS): Define.
1337 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
1338 (MOSTLYCLEAN): Add config.log.
1339 (distclean): Don't remove config.log.
1340 * configure.in: Substitute HDEFINES.
1341 * configure: Rebuild.
1343 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1345 * sh-opc.h (sh_arg_type): Add F_FR0.
1346 (sh_table, case fmac): Add F_FR0 as first argument.
1348 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1350 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
1352 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
1354 * sparc-dis.c: Remove all references to NO_V9.
1356 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
1358 * aclocal.m4: Just include ../bfd/aclocal.m4.
1359 * configure: Rebuild.
1361 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
1363 * sparc-dis.c (X_DISP19): Define.
1364 (print_insn, case 'G'): Use it.
1365 (print_insn, case 'L'): Sign extend displacement.
1367 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
1369 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
1370 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
1371 host_makefile_frag or frags.
1372 * aclocal.m4: New file.
1373 * configure: Rebuild.
1374 * Makefile.in (INSTALL): Set to @INSTALL@.
1375 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
1376 (INSTALL_DATA): Set to @INSTALL_DATA@.
1378 (AR_FLAGS): Set to rc rather than qc.
1379 (CC): Define as @CC@.
1380 (CFLAGS): Set to @CFLAGS@.
1381 (@host_makefile_frag@): Remove.
1382 (config.status): Remove dependency upon @frags@.
1384 * configure.in: ../bfd/config.bfd now just sets shell variables.
1385 Use them rather than looking through target Makefile fragments.
1386 * configure: Rebuild.
1388 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1390 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
1392 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
1394 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
1395 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
1398 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
1399 (lookup_{name,value}): New functions.
1400 (prefetch_table): New static local.
1401 (sparc_{encode,decode}_prefetch): New functions.
1402 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
1404 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1406 * sh-opc.h: Add blank lines to improve readabililty of sh3e
1409 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1411 * sh-dis.c: Correct comment on first line of file.
1413 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
1415 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
1417 * sparc-opc.c (asi, membar): New static locals.
1418 (sparc_{encode,decode}_{asi,membar}): New functions.
1419 (sparc_opcodes, membar insn): Fix.
1420 * sparc-dis.c (print_insn): Call sparc_decode_asi.
1421 Support decoding of membar masks.
1424 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
1426 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
1428 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
1430 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
1431 and likewise for the other branches. Add bhs as an alias for bcc,
1432 and likewise for the size variants. Add dbhs as an alias for
1435 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
1437 * sh-opc.h (FP sts instructions): Update to match reality.
1439 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
1441 * m68k-dis.c: (fpcr_names): Add % before all register names.
1442 (reg_names): Likewise.
1443 (print_insn_arg): Don't explicitly print % before register names.
1444 Add % before register names in static array names. In case 'r',
1445 print data registers as `@(Dn)', not `Dn@'. When printing a
1446 memory address, don't print @# before it.
1447 (print_indexed): Change base_disp and outer_disp from int to
1448 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
1449 syntax. Sign extend 8 byte displacement correctly.
1450 (print_base): Print using MIT syntax. Print zpc when appropriate.
1451 Change parameter disp from int to bfd_vma.
1453 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
1456 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
1458 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
1459 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
1460 * sh-opc.h (sh_arg_type): Add new operand types.
1461 (sh_table): Add new opcodes from SH3E Floating Point ISA.
1463 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1465 * Makefile.in (distclean): Remove generated file config.h.
1467 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1469 * Makefile.in (distclean): Remove generated file config.h.
1471 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
1473 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
1475 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
1477 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
1478 rather than numopcodes. Use m68k_opcodes rather than removed
1479 opcode function. Don't check F_ALIAS.
1480 (print_insn_arg): Change first parameter to be const char *.
1481 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
1482 (m68k-opc.o): New target.
1483 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
1484 * configure: Rebuild.
1486 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
1488 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
1489 (opcode_bits, opcode_hash_table): New variables.
1490 (opcodes_initialized): Renamed from opcodes_sorted.
1491 (build_hash_table): New function.
1492 (is_delayed_branch): Use hash table.
1493 (print_insn): Renamed from print_insn_sparc, made static.
1494 Build and use hash table. If !sparc64, ignore sparc64 insns,
1495 and vice-versa if sparc64.
1496 (print_insn_sparc, print_insn_sparc64): New functions.
1497 (compare_opcodes): Move sparc64 opcodes to end.
1498 Print commutative insns with constant second.
1499 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
1501 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
1503 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
1504 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
1505 avoids printing a delay slot in a delay slot.
1506 * sh-opc.h (sh_table): Fully bracket last entry.
1508 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
1510 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
1512 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
1514 * configure.in: Get host_makefile_frag from ${srcdir}.
1516 * configure.in: Autoconfiscated. Check for string[s].h. Create
1517 config.h from config.in. Don't set up sysdep.h link.
1518 * sysdep.h: New file.
1519 * configure, config.in: New files, generated from configure.in.
1520 * Makefile.in: Updated to be processed autoconf-style.
1521 (distclean): Keep sysdep.h. Remove config.log and config.cache.
1522 (Makefile): Depend on config.status.
1523 (config.status): New rule.
1524 * configure.bat: Update Makefile substitutions.
1526 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
1528 * mips-opc.c (L1): Define.
1529 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
1530 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
1533 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
1535 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
1536 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
1537 have multiple add units but only a single logical unit.
1539 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
1540 shifted by 18, without any insertion or extraction function.
1541 (insert_cr, extract_cr): Remove.
1544 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
1546 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
1549 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1551 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
1554 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
1556 * mpw-config.in: Add sh and i386 configs, remove sparc config.
1557 * sh-opc.h: Add copyright.
1559 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
1561 * Makefile.in (crunch-m68k): Delete extra target accidentally
1562 checked in a while ago.
1564 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1566 * sh-opc.h (sh_table): Add SH3 support.
1568 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
1570 * sh-opc.h: Added bsrf and braf.
1572 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
1574 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
1575 bogus [ls]fm{ea,fd} patterns.
1577 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
1578 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
1579 initialize it from memory. Make function static.
1580 (print_insn_{big,little}_arm): New functions.
1581 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
1582 the correct endianness.
1585 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
1587 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
1588 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
1591 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
1593 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
1596 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1598 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
1599 17th, so that it builds again using GCC as the compiler.
1601 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1603 * mips-dis.c (print_insn_little_mips): Cast return value from
1604 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
1605 expects an unsigned long, and that might be fewer words of
1606 argument storage (e.g., if bfd_vma is long long on a 32-bit
1608 (print_insn_big_mips): Likewise with bfd_getb32 value.
1609 (_print_insn_mips): Now static.
1611 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
1613 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
1614 gcc memory hog problem with initializer is fixed.
1617 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
1619 * arc-opc.c (NULL): Define.
1620 (arc_operands, insn fields u,s): Delete.
1621 (arc_operands, insn fields a,b,c): Mark as signed.
1622 (arc_opcodes): No longer const, links computed at run-time.
1623 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
1624 suffixes that affect the insn code.
1625 (arc_opcodes): Resort table to macros are first.
1626 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
1627 (arc_opcodes, st [b] entry): Likewise.
1628 (arc_opcodes, st [b,d] entry): Fix mask, value.
1629 (arc_reg_names): Add entries for r29, r30, r31, r60.
1630 (opcode_map, icode_map): New static globals.
1631 (arc_opcode_init_tables): Initialize them.
1632 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
1633 (insert_shimmoffset): Signal error if register present.
1635 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
1638 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
1640 Merge in support for Mac MPW as a host.
1641 (Old change descriptions retained for informational value.)
1643 * mpw-config.in (archname): Compute from the config.
1644 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
1646 * mpw-config.in (target_arch): Compute from canonical target.
1647 (m68k, mips, powerpc, sparc): Add architectures.
1648 * mpw-make.in (disassemble.c.o): Add.
1649 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
1651 * mpw-config.in (BFD_MACHINES): Set to a default value.
1652 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
1654 * mpw-make.in (CSEARCH): Add extra-include to search path.
1656 * mpw-config.in (varargs.h): Don't create.
1657 (sysdep.h): Create using forward-include.
1658 * mpw-make.in (CSEARCH): Add include/mpw to search path.
1660 * mpw-config.in: New file, MPW version of configure.in.
1661 * mpw-make.in: New file, MPW version of Makefile.in.
1664 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
1666 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
1667 Call arc_get_opcode_mach to map bfd mach number to opcode value.
1668 (print_insn_*): Pass bfd mach number, not opcode version.
1669 * arc-opc.c (arc_get_opcode_mach): New function.
1672 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1674 * alpha-dis.c (print_insn_alpha): Put empty statement after
1677 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
1679 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
1680 (low_sign_extend): Likewise.
1681 (get_field): Delete unused function.
1682 (set_field, deposit_14, deposit_21): Likewise.
1684 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1686 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
1689 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
1691 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
1693 * alpha-opc.h (OSF_ASMCODE): define
1694 print pal-code names as defined in App C of the
1695 Alpha Architecture Reference Manual
1697 * alpha-dis.c: cleaned up output
1698 print stylized code forms as defined in App A.4.3 of the
1699 Alpha Architecture Reference Manual
1701 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
1703 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
1705 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
1708 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1710 * m68k-dis.c (opcode): New function. Returns address of opcode
1711 table entry given index, even if the opcode table was split to
1712 work around gcc bugs.
1713 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
1715 (BREAK_UP_BIG_DECL): Make secondary array static and const.
1716 (reg_names): Now const.
1717 (print_insn_arg): Arrays cacheFieldName and names now const.
1718 (print_indexed): Array scales now const.
1721 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
1723 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
1724 (print_insn_arc_{host,graphics,audio}): Likewise.
1725 (print_insn): Add prototype.
1726 (arc_get_disassembler): New arg `big_p'. Return little or big
1727 print fn accordingly.
1728 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
1729 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
1730 (arc_opval_supported): Likewise.
1731 * disassemble.c (disassembler): Pass big endian flag to
1732 arc_get_disassembler.
1735 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
1737 * ppc-opc.c: Sort recently added instructions by minor opcode
1738 number within major opcode number.
1740 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
1742 * hppa-dis.c: Include libhppa.h.
1744 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
1746 * mips-opc.c: Change dli to use M_DLI, and add dla.
1748 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1750 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
1753 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
1755 * arc-dis.c (arc_get_disassembler): Change argument to int,
1756 one of bfd_mach_arc_xxx. All callers updated.
1759 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
1761 * mips-opc.c: Add r4650 mul instruction.
1763 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
1765 * mips-opc.c: Add uld and usd macros for unaligned double load and
1768 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1770 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
1771 mfdcr, mtdcr, icbt, iccci.
1774 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
1776 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
1777 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
1778 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
1779 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
1780 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
1781 (insert_absaddr): New function.
1783 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
1785 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
1786 New argument `cpu', pass it to arc_opcode_init_tables.
1787 Document byte order dependencies. Ignore unsupported insns.
1788 (arc_get_disassembler): New function.
1789 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
1790 print_insn_arc_audio): New functions.
1791 * arc-opc.c (MULTSHIFT operand): Delete.
1792 (UNSIGNED, SATURATION): New operands.
1793 (mac, mul, mul64, mulu64): New insns.
1794 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
1795 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
1796 (host,graphics,audio extended and auxiliary regs): Define.
1797 (ss, sc, mh, ml): New suffixes.
1798 (arc_opcode_supported, arc_opval_supported): New functions.
1799 (insert_multshift, extract_multshift): Deleted.
1800 * disassemble.c (disassembler, case bfd_arch_arc): Call
1801 arc_get_disassembler to get disassembler routine.
1804 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
1806 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
1807 signed char fields to shorts, more portable.
1809 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
1811 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
1812 char fields as signed chars, since they may have negative values.
1814 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1816 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
1817 (mycroft@netbsd.org).
1819 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
1821 From "Logg, Ed" <elogg@ea.com>:
1822 * ppc-opc.c (extract_bdm): Correct parenthezisation.
1823 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
1826 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
1828 * ppc-opc.c: Changes based on patch from David Edelsohn
1829 <edelsohn@mhpcc.edu>.
1830 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
1833 (insert_tbr): New static function.
1834 (extract_tbr): New static function.
1835 (XFXFXM_MASK, XFXM): Define.
1836 (XSPRBAT_MASK, XSPRG_MASK): Define.
1837 (powerpc_opcodes): Add instructions to access special registers by
1838 name. Add mtcr and mftbu.
1840 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
1842 * mips-opc.c (P3): Define.
1843 (mips_opcodes): Add mad and madu.
1845 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
1847 * configure.in: Add W65 support.
1848 * disassemble.c: Likewise.
1849 * w65-opc.h, w65-dis.c: New files.
1851 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1853 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
1857 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
1859 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
1861 * arc-opc.c (extract_reladdr): New function.
1862 (insert_reladdr): Store address right-shifted by 2.
1865 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1867 * mips-opc.c: Add dli as a synonym for li.
1870 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
1872 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
1874 (extraction fns): Insn argument now array of two words. Return pointer
1875 to value's table entry. All uses changed.
1876 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
1877 (insert_multshift, extract_multshift): New fns.
1878 (arc_operands): Add support for cache bypass suffix. Add support for
1879 predefined aux regs. Modifier bits moved to flags field.
1880 (arc_opcodes): Likewise.
1881 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
1882 New insn rlc. Update to syntax in programmer's manual.
1883 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
1884 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
1886 (arc_opcode_init_tables): New argument to indicate cpu type.
1887 (insert_reg): Handle predefined aux regs.
1888 (extract_reg): Likewise.
1889 (lookup_register): New fn.
1890 * arc-dis.c (arc_condition_codes): Deleted.
1891 (print_insn_arc): Handle insns with 32 bit immediate constants better.
1892 Clean up modifier handling. Handle predefined aux regs.
1895 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1897 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
1898 print something for reserved opcode values, even if it won't
1901 * mips-dis.c (_print_insn_mips): When initializing, shift right
1902 and mask, to avoid sign extension problems on the Alpha.
1904 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
1908 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
1910 * configure.in: Add ARC support.
1911 * disassemble.c: Likewise.
1912 * arc-dis.c, arc-opc.c: New files.
1915 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1917 * sh-opc.h (mov.l gbr): Get direction right.
1918 * sh-dis.c (print_insn_shx): New function.
1919 (print_insn_shl, print_insn_sh): Call print_insn_shx to
1920 print opcodes with right byte order.
1922 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1924 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
1925 to avoid conflicts with getopt.
1927 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1929 * hppa-dis.c (print_insn_hppa): Read the instruction using
1930 bfd_getb32, so that it works on a little endian or 64 bit host.
1931 Remove unused local variable op.
1933 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1935 * mips-opc.c: Use or instead of addu for pseudo-op move, since
1936 addu does not work correctly if -mips3.
1938 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1940 * a29k-dis.c (print_special): Add special register names defined
1941 on 29030, 29040 and 29050.
1942 (print_insn): Handle new operand type 'I'.
1944 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1946 * Makefile.in (INSTALL): Use top level install.sh script.
1948 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1950 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
1951 that it works on a little endian host.
1953 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1955 * configure.in: Use ${config_shell} when running config.bfd.
1957 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1959 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
1961 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1963 * a29k-dis.c (print_insn): Print the opcode.
1965 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1967 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
1969 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
1971 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
1973 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1975 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
1976 which store a value into memory.
1978 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
1980 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
1981 * arm-dis.c, arm-opc.h: New files.
1983 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
1985 * Makefile.in (ns32k-dis.o): Add dependency.
1986 * ns32k-dis.c (print_insn_arg): Declare initialized local as
1987 string, not as array of chars.
1989 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1991 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
1993 * sparc-opc.c: Added sparclite extended FP operations, and
1994 versions of v9 impdep* instructions permitting specification of
1997 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1999 * i960-dis.c (reg_names): Now const.
2000 (struct sparse_tabent): New type, copied from array type in mem
2002 (ctrl): Local static array ctrl_tab now const.
2003 (cobr): Local static array cobr_tab now const.
2004 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2005 static variable mem_tab no longer explicitly initialized. Changed
2006 mem_init to const array of struct sparse_tabent.
2007 (reg): Local static variable reg_tab no longer explicitly
2008 initialized. Changed reg_init to const array of struct
2010 (ea): Local static array scale_tab now const.
2012 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2015 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2017 * configure.bat: the disassember needs to be enabled for
2018 "objdump -d" to work in djgpp.
2020 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2022 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2023 (invalid_float): Enabled general version, doesn't require running
2024 on ns32k host. Changed to take char* argument, and test for
2025 explicitly specified sizes, instead of using sizeof() on host CPU
2027 (INVALID_FLOAT): Cast first argument.
2028 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2029 list_P032, list_M032): Now const.
2030 (optlist, list_search): Made appropriate arguments now point to
2032 (print_insn_arg): Changed static array of one-character-string
2033 pointers into a static const array of characters; fixed sprintf
2034 statement accordingly.
2036 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2038 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
2039 from distribution. A ns32k-dis.c from a previous distribution has
2040 been brought up to date and supports the new interface.
2042 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2044 * configure.in: add bfd_ns32k_arch target support.
2046 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2047 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2049 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2051 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2054 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
2056 * h8300-dis.c, mips-dis.c: Don't use true and false.
2058 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2060 * configure.in: Change --with-targets to --enable-targets.
2062 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2064 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2065 opcodes to the first instruction with that opcode, to speed
2066 disassembly of large files. From ralphc@pyramid.com (Ralph
2069 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2071 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
2073 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
2075 * configure.bat: update to latest makefile.in
2077 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
2079 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
2080 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
2081 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
2082 slot insn is in a delay slot.
2083 * z8k-opc.h: (resflg): Fix patterns.
2084 * h8500-opc.h Fix CR insn patterns.
2086 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2088 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
2089 "cmpl" before POWER versions, so that gas -many uses them.
2091 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2093 * disassemble.c: New file.
2094 * Makefile.in (OFILES): Add disassemble.o.
2095 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
2096 * configure.in: Define ARCHDEFS in Makefile. Code taken from
2097 binutils/configure.in.
2099 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
2100 opcode being examined.
2102 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2104 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
2105 (insert_ral, insert_ram, insert_ras): New functions.
2106 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
2107 RAS for store with update.
2109 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2111 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
2112 (edelsohn@npac.syr.edu).
2114 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2116 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
2119 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
2121 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
2123 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2125 * ppc-opc.c (powerpc_operands): The signedp field has been
2126 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
2127 instead. Add new operand SISIGNOPT.
2128 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
2129 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
2130 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
2133 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2135 * i386-dis.c (struct private): Renamed to dis_private. `private'
2136 is a reserved word for dynix cc.
2138 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2140 * configure.in: Change error message to refer to bfd/config.bfd
2141 rather than bfd/configure.in.
2143 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
2145 * ppc-opc.c: Define POWER2 as short alias flag.
2146 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
2149 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2151 * i960-dis.c (print_insn_i960): Don't read a second word for
2152 opcodes 0, 1, 2 and 3.
2154 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2156 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
2158 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2160 * m68881-ext.c: Removed; no longer used.
2161 * Makefile.in: Changed accordingly.
2163 * m68k-dis.c (ext_format_68881): Don't declare.
2164 (print_insn_m68k): If an instruction uses place 'i', it uses at
2165 least four fixed bytes.
2166 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
2167 extended float, convert to double using floatformat_to_double, not
2168 ieee_extended_to_double, and fetch the data before converting it.
2170 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2172 * mips-opc.c: It's sqrt.s, not sqrt.w. From
2173 davidj@ICSI.Berkeley.EDU (David Johnson).
2175 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2177 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
2178 PowerPC uses bdnz[l][a].
2180 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2182 * dis-buf.c, i386-dis.c: Include sysdep.h.
2184 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2186 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
2188 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
2189 by Motorola PowerPC 601 with PPC_OPCODE_601.
2190 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
2191 Disassemble Motorola PowerPC 601 instructions as well as normal
2192 PowerPC instructions.
2194 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
2196 * i960-dis.c (reg, mem): Just use a static array instead of
2199 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2201 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
2202 condition name index if this is for a negated condition.
2204 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
2205 Floating point format for 'H' operand is backwards from normal
2206 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
2207 operands (fmpyadd and fmpysub), handle bizarre register
2208 translation correctly for single precision format.
2210 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
2211 or 'I' operands if the next format specifier is 'M' (fcmp
2212 condition completer).
2214 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2216 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
2217 single number giving a bitmask for the MB and ME fields of an M
2218 form instruction. Change NB to accept 32, and turn it into 0;
2219 also turn 0 into 32 when disassembling. Seperated SH from NB.
2220 (insert_mbe, extract_mbe): New functions.
2221 (insert_nb, extract_nb): New functions.
2222 (SC_MASK): Mask out SA and LK bits.
2223 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
2224 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
2225 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
2226 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
2227 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
2228 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
2229 (powerpc_macros): Define table of macro definitions.
2230 (powerpc_num_macros): Define.
2232 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
2233 if PPC_OPERAND_NEXT is set.
2235 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2237 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
2238 char. Retrieve contents using bfd_getl32 instead of shifting.
2240 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2242 * ppc-opc.c: New file. Opcode table for PowerPC, including
2243 opcodes for POWER (RS/6000).
2244 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
2245 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
2246 (CFILES): Add ppc-dis.c.
2247 (ppc-dis.o, ppc-opc.o): New targets.
2248 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
2250 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2252 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
2253 No space before 'u', 'f', or 'N'.
2255 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
2257 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
2258 farther than we should.
2260 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
2262 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2264 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
2266 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2268 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
2269 needs it, to prevent reading past the end of a section.
2271 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2273 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
2274 Removed t,A case for la; always use t,A(b) case.
2276 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2278 From Ted Lemen <mellon@pepper.ncd.com>
2279 * mips-dis.c (print_insn_arg): Handle 'k'.
2280 * mips-opc.c: Make cache use k, not t.
2282 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2284 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
2285 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
2286 FLOAT_FORMAT_CODE to put out floating point register names.
2288 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2290 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
2292 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2294 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
2296 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2298 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
2299 larger than 32. Moved dsxx32 variants first for disassembler.
2301 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2303 * z8kgen.c, z8k-opc.h: Add full lda information.
2305 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
2307 * hppa-dis.c (print_insn_hppa): Do not emit a space after
2308 movb instructions. Any necessary space will be emitted by
2309 the code to handle nullification completers.
2311 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2313 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
2315 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2317 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
2318 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
2320 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2322 * mips-opc.c: Correct lwu opcode value (book had it wrong).
2324 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2326 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
2327 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
2329 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
2331 * m88k-dis.c (m88kdis): comment change. Remove space after
2333 (printop): handle new arg types DEC and XREG for m88110.
2335 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
2337 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
2338 type for absolute branch addresses. Delete special
2339 "ble" and "be" code in 'W' operand code.
2341 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2343 * mips-opc.c: Set hazard information correctly for branch
2344 likely instructions.
2346 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2348 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
2349 info->fprintf_func for printing and info->print_address_func for
2352 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2354 * mips-opc.c: Set INSN_TRAP for tXX instructions.
2356 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2358 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
2359 Corrected second case of "b" for disassembler.
2361 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2363 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
2364 to BFD swapping routines to correspond to BFD name changes.
2366 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2368 * mips-opc.c: Change div machine instruction to be z,s,t rather
2369 than s,t. Change div macro to be d,v,t rather than d,s,t.
2370 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
2371 rem and remu which generates only the corresponding div
2372 instruction. This is for compatibility with the MIPS assembler,
2373 which only generates the simple machine instruction when an
2374 explicit destination of $0 is used.
2375 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
2377 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2379 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
2380 WR_31 hazard for bal, bgezal, bltzal.
2382 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2384 * hppa-dis.c (print_insn_hppa): Use print function
2385 from within the disassemble_info, not fprintf_filtered.
2387 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2389 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
2390 Law, law@cs.utah.edu.)
2392 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2394 * mips-opc.c ("absu"): Removed.
2397 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2399 * mips-opc.c: Added r6000 and r4000 instructions and macros.
2400 Changed hazard information to distinguish between memory load
2401 delays and coprocessor load delays.
2403 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2405 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
2407 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2409 * configure.in: Don't pass cpu to config.bfd.
2411 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2413 * m88k-dis.c (m88kdis): Make class unsigned.
2415 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
2417 * alpha-dis.c (print_insn_alpha): One branch format case was
2418 missing the instruction name.
2420 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2422 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
2423 Add the arch-specific auxiliary files.
2424 (OFILES): Remove the arch-specific auxiliary files
2425 and use BFD_MACHINES instead of DIS_LIBS.
2426 * configure.in: Set BFD_MACHINES based on --with-targets option.
2428 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2430 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
2433 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2435 * sparc-opc.c: Change CONST to const to deal with gcc
2436 -Dconst=__const -traditional.
2438 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2440 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
2441 coprocessor instructions out of #if 0, and made them use new
2444 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2446 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
2448 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
2450 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
2451 instruction, for use by the disassembler.
2453 * sparc-dis.c (SEX): Add sign extension macro. Replace many
2454 hand-coded sign extensions that depended on 32-bit host ints.
2455 FIXME, we still depend on big-endian host bitfield ordering.
2456 (sparc_print_insn): Set the insn_info_valid field, and the
2457 other fields that describe the instruction being printed.
2459 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
2461 * sparc-opc.c (call): Accept all 6 addressing modes valid for
2462 `jmp' instead of just one of them.
2464 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2466 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
2467 (fput_fp_reg_r): Renamed from fput_reg_r.
2468 (fput_fp_reg): New function.
2469 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
2471 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
2473 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
2475 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2477 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
2479 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
2480 don't output a space.
2482 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
2484 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
2486 * mips-opc.c: New file, containing opcode table from
2487 ../include/opcode/mips.h.
2488 * Makefile.in: Add it.
2490 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2492 * m88k-dis.c: New file, moved in from gdb and changed to use the
2493 new dis-asm.h disassembler interface.
2494 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
2495 (m88k-dis.o): New target.
2497 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
2499 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
2500 argument string const char * to correspond to opcode/mips.h.
2502 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
2504 * mips-dis.c: Updated to account for name changes in new version
2506 * Makefile.in: Added header file dependencies.
2508 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
2510 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
2512 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2514 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
2515 extend, rather than shifts.
2517 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
2519 * Makefile.in: Undo 15 June change.
2521 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
2523 * m68k-dis.c (print_insn_arg): Change return value to byte count
2525 * m68k-dis.c: Re-write to detect invalid operands before
2526 printing anything, so we can handle this the same way we
2527 handle invalid opcodes.
2529 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2531 * sh-dis.c, sh-opc.h: Understand some more opcodes.
2533 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
2535 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
2538 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2540 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
2542 * configure.in: Do make sysdep.h link.
2543 * Makefile.in: Search ../include. Don't search ../bfd.
2545 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
2547 Changes from Jeff Law, law@cs.utah.edu:
2548 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
2549 Do not print a space before the completers specified by
2552 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
2554 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
2555 defined, since gdb has been fixed.
2557 Changes from Jeff Law, law@cs.utah.edu:
2558 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
2559 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
2560 be a *disassemble_info, not a *FILE.
2561 * hppa-dis.c: Support 'd', '!', and 'a'.
2562 * hppa-dis.c: Support 's' to extract a 2 bit space register.
2563 * hppa-dis.c: Delete cases which are no longer needed.
2565 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
2567 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
2569 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2571 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
2574 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
2576 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
2577 * configure.in: No longer need to configure to get sysdep.h.
2579 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
2581 * Patches from Jeffrey Law <law@cs.utah.edu>.
2582 * hppa-dis.c: Support 'I', 'J', and 'K' in output
2583 templates for 1.1 FP computational instructions.
2585 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2587 * h8500-dis.c (print_insn_h8500): Address argument is type
2589 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
2592 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
2593 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
2595 * sparc-dis.c (compare_opcodes): Move static declaration to
2598 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2600 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
2601 instruction, remove unimp hack from 'l' argument.
2603 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
2605 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
2608 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
2610 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
2611 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
2614 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2616 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
2617 arrays of string pointers to 2-d arrays of chars, to save
2620 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
2622 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
2623 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
2625 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2627 * hppa-dis.c: New file from Utah, adapted to new disassembler
2629 * Makefile.in: Include it.
2631 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2633 * sh-dis.c, sh-opc.h: New files.
2635 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2637 * alpha-dis.c, alpha-opc.h: New files.
2639 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2641 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
2644 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
2646 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
2648 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
2650 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
2653 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
2655 * sparc-dis.c: Use fprintf_func a few places where I forgot,
2656 and double percent signs a few places.
2658 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
2660 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
2661 Use info->print_address_func not print_address.
2663 * dis-buf.c (generic_print_address): New function.
2665 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2667 * Makefile.in: Add sparc-dis.c.
2668 sparc-dis.c: New file, merges binutils and gdb versions as follows:
2670 Add `add' instruction to the set that get checked
2671 for a preceding `sethi' in order to print an absolute address.
2672 * (print_insn): Disassembly prefers real instructions.
2673 (is_delayed_branch): Speed up.
2674 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
2675 Still missing some float ops, and needs testing.
2676 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
2677 F_ALIAS. Use printf, not fprintf, when not passing a file
2679 (compare_opcodes): Check that identical instructions have
2680 identical opcodes, complain otherwise.
2683 * Include reg_names.
2685 Use dis-asm.h/read_memory_func interface.
2687 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
2689 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
2690 deliberately return non-zero to setjmp from longjmp. Otherwise
2691 this code fails to compile.
2693 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
2695 * m68k-dis.c: Fix prototype for fetch_arg().
2697 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2699 * dis-buf.c: New file, for new read_memory_func interface.
2700 Makefile.in (OFILES): Include it.
2701 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
2702 Use new read_memory_func interface.
2704 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2706 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
2707 * h8500-opc.h: Fix couple of opcodes.
2709 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
2711 * Makefile.in: add dvi & installcheck targets
2713 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
2715 * Makefile.in: Update for h8500-dis.c.
2717 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2719 * h8500-dis.c, h8500-opc.h: New files
2721 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
2723 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
2724 ../include/dis-asm.h.
2725 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
2726 and ../gdb/m68k-pinsn.c).
2727 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
2728 and ../gdb/i386-pinsn.c).
2729 * m68881-ext.c: New file. Moved definition of
2730 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
2731 * Makefile.in: Adjust for new files.
2732 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
2733 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
2734 can be dis-assembled.
2736 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2738 * mips-dis.c (print_insn_arg): Now returns void.
2740 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
2742 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
2743 files that use the macros.
2745 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2747 * mips-dis.c: New file, from gdb/mips-pinsn.c.
2748 * Makefile.in (DIS_LIBS): Added mips-dis.o.
2749 (CFILES): Added mips-dis.c.
2751 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2753 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
2754 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
2756 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
2758 * Makefile.in: Improve *clean rules.
2759 * configure.in: Allow a default host.
2761 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2763 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
2764 files include other sysdep files
2766 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2768 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
2770 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
2772 * configure.in: For host support, use ../bfd/configure.host
2773 so it stays in sync with the ../bfd/hosts database.
2775 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2777 * configure.in: use cpu-vendor-os triple instead of nested cases
2779 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
2781 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
2782 *always* the wrong one.
2784 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2786 * z8kgen.c: added copyright info
2788 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2790 * z8k-dis.c (unparse_instr): prettier tabs
2791 * z8kgen.c -> z8k-opc.h: bug fixes in tables
2793 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
2795 * configure.in: Add ncr* configuration.
2796 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
2797 picayune ANSI compilers happy.
2799 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
2801 * configure.in (i386): Make i386 and i486 synonymous for now.
2802 * configure.in (i[34]86-*-sysv4): Add my_host definition.
2804 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2806 * Makefile.in (install): Fix typo.
2808 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
2810 * Makefile.in (make): Remove obsolete crud.
2811 (sparc-opc.o): Avoid Sun Make VPATH bug.
2813 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
2815 * Makefile.in: since there are no SUBDIRS, remove rule and
2816 references of subdir_do.
2818 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2820 * Makefile.in (install): Get the library name right here too.
2821 Don't install bfd.h, since it's unrelated to this library. No
2822 subdirs to recurse into, either.
2823 (CFILES): The source file has a .c suffix, not .o.
2825 * sparc-opc.c: New file, moved from BFD.
2826 * Makefile.in (OFILES): Build it.
2828 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
2830 * z8k-dis.c: fixed forward refferences of some declarations.
2832 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
2834 * Makefile.in: get the name of the library right
2836 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2838 * z8k-dis.c: knows how to disassemble z8k stuff
2839 * z8k-opc.h: new file full of z8000 opcodes
2843 version-control: never