1 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
4 incorrectly defined as 0x16 when it should be 0x15.
5 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
6 (alpha_insn_set): added cvtst and cvttq float ops. Also added
7 excb (exception barrier) which is defined in the Alpha
8 Architecture Handbook version 2.
9 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
10 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
11 disassembled as or, for example.
13 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
15 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
16 (_print_insn_mips): Change i from int to unsigned int.
18 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
20 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
21 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
23 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
25 * i386-dis.c: Added Pentium Pro instructions.
27 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
29 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
32 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
34 * sh-opc.h (sh_nibble_type): Added REG_B.
35 (sh_arg_type): Added A_REG_B.
36 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
38 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
40 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
42 * disassemble.c (disassembler): Use new bfd_big_endian macro.
44 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
46 * Makefile.in (distclean): Remove stamp-h. From Ronald
47 F. Guilmette <rfg@monkeys.com>.
49 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
51 From David Mosberger-Tang <davidm@azstarnet.com>:
52 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
55 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
57 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
58 (sh_table): Added many SH3 opcodes.
59 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
61 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
63 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
64 (subco,subco.): Mark this PPC, not PPCCOM.
66 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
68 * configure: Rebuild with autoconf 2.7.
70 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
72 * configure: Rebuild with autoconf 2.6.
74 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
76 * configure.in: Sort list of architectures. Accept but do nothing
77 for alliant, convex, pyramid, romp, and tahoe.
79 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
81 * a29k-dis.c (print_special): Change num to unsigned int.
83 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
85 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
88 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
90 * configure.in: Call AC_CHECK_PROG to find and cache AR.
93 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
95 * configure.in: Add case for bfd_i860_arch.
98 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
100 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
101 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
102 (NEXTDOUBLE): Likewise.
103 (print_insn_m68k): Don't match fmoveml if there is more than one
104 register in the list.
105 (print_insn_arg): Handle a place of '8' for a type of 'L'.
107 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
109 * m68k-opc.c: Use #W rather than #w.
110 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
112 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
114 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
115 and likewise for all the dbxx opcodes.
117 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
119 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
121 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
123 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
124 the VR4100 specific instructions to the mips_opcodes structure.
126 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
128 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
129 ugly Metrowerks bug in CW6, is fixed in CW7.
131 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
133 * ppc-opc.c (whole file): Add flags for common/any support.
135 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
137 * Makefile.in (BISON): Remove macro.
138 (FLAGS_TO_PASS): Remove BISON.
140 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
142 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
144 * m68k-dis.c (print_insn_m68k): Recognize all two-word
145 instructions that take no args by looking at the match mask.
146 (print_insn_arg): Always print "%" before register names.
147 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
148 [case '_']: Don't print "@#" before address.
149 [case 'J']: Use "%s" as format string, not register name.
150 [case 'B']: Treat place == 'C' like 'l' and 'L'.
152 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
154 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
157 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
159 From David Mosberger-Tang <davidm@azstarnet.com>
161 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
162 (alpha_insn_set): added definitions for VAX floating point
163 instructions (Unix compilers don't generate these, but handcoded
164 assembly might still use them).
166 * alpha-dis.c (print_insn_alpha): added support for disassembling
167 the miscellaneous instructions in the Alpha instruction set.
169 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
171 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
172 no longer create sysdep.h, sed ppc-opc.c to work around a
173 serious Metrowerks C bug.
174 * mpw-make.in: Remove.
175 * mpw-make.sed: New file, used by mpw-configure to edit
176 Makefile.in into an MPW makefile.
178 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
180 * Makefile.in (maintainer-clean): New synonym for realclean.
182 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
184 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
185 which use '0', '1', and '2' instead. Specify the proper size for
186 a pmove immediate operand. Correct the pmovefd patterns to be
187 moves to a register, not from a register.
188 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
190 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
192 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
193 %psr, %wim, %tbr as F_NOTV9.
195 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
197 * Makefile.in (Makefile): Just rebuild Makefile when running
199 (config.h, stamp-h): New targets.
200 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
201 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
203 * configure: Rebuild.
205 * mips-opc.c: Change unaligned loads and stores with "t,A"
206 operands to use "t,A(b)".
209 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
211 * sh-dis.c (print_insn_shx): Add F_FR0 support.
214 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
216 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
217 until 3 instead of until 2.
219 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
221 * Makefile.in (ALL_CFLAGS): Define.
222 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
223 (MOSTLYCLEAN): Add config.log.
224 (distclean): Don't remove config.log.
225 * configure.in: Substitute HDEFINES.
226 * configure: Rebuild.
229 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
231 * sh-opc.h (sh_arg_type): Add F_FR0.
232 (sh_table, case fmac): Add F_FR0 as first argument.
235 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
237 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
239 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
241 * sparc-dis.c: Remove all references to NO_V9.
243 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
245 * aclocal.m4: Just include ../bfd/aclocal.m4.
246 * configure: Rebuild.
248 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
250 * sparc-dis.c (X_DISP19): Define.
251 (print_insn, case 'G'): Use it.
252 (print_insn, case 'L'): Sign extend displacement.
254 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
256 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
257 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
258 host_makefile_frag or frags.
259 * aclocal.m4: New file.
260 * configure: Rebuild.
261 * Makefile.in (INSTALL): Set to @INSTALL@.
262 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
263 (INSTALL_DATA): Set to @INSTALL_DATA@.
265 (AR_FLAGS): Set to rc rather than qc.
266 (CC): Define as @CC@.
267 (CFLAGS): Set to @CFLAGS@.
268 (@host_makefile_frag@): Remove.
269 (config.status): Remove dependency upon @frags@.
271 * configure.in: ../bfd/config.bfd now just sets shell variables.
272 Use them rather than looking through target Makefile fragments.
273 * configure: Rebuild.
276 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
278 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
281 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
283 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
284 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
287 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
288 (lookup_{name,value}): New functions.
289 (prefetch_table): New static local.
290 (sparc_{encode,decode}_prefetch): New functions.
291 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
294 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
296 * sh-opc.h: Add blank lines to improve readabililty of sh3e
300 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
302 * sh-dis.c: Correct comment on first line of file.
304 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
306 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
308 * sparc-opc.c (asi, membar): New static locals.
309 (sparc_{encode,decode}_{asi,membar}): New functions.
310 (sparc_opcodes, membar insn): Fix.
311 * sparc-dis.c (print_insn): Call sparc_decode_asi.
312 Support decoding of membar masks.
315 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
317 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
319 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
321 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
322 and likewise for the other branches. Add bhs as an alias for bcc,
323 and likewise for the size variants. Add dbhs as an alias for
327 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
329 * sh-opc.h (FP sts instructions): Update to match reality.
332 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
334 * m68k-dis.c: (fpcr_names): Add % before all register names.
335 (reg_names): Likewise.
336 (print_insn_arg): Don't explicitly print % before register names.
337 Add % before register names in static array names. In case 'r',
338 print data registers as `@(Dn)', not `Dn@'. When printing a
339 memory address, don't print @# before it.
340 (print_indexed): Change base_disp and outer_disp from int to
341 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
342 syntax. Sign extend 8 byte displacement correctly.
343 (print_base): Print using MIT syntax. Print zpc when appropriate.
344 Change parameter disp from int to bfd_vma.
346 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
350 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
352 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
353 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
354 * sh-opc.h (sh_arg_type): Add new operand types.
355 (sh_table): Add new opcodes from SH3E Floating Point ISA.
358 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
360 * Makefile.in (distclean): Remove generated file config.h.
362 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
364 * Makefile.in (distclean): Remove generated file config.h.
366 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
368 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
370 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
372 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
373 rather than numopcodes. Use m68k_opcodes rather than removed
374 opcode function. Don't check F_ALIAS.
375 (print_insn_arg): Change first parameter to be const char *.
376 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
377 (m68k-opc.o): New target.
378 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
379 * configure: Rebuild.
381 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
383 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
384 (opcode_bits, opcode_hash_table): New variables.
385 (opcodes_initialized): Renamed from opcodes_sorted.
386 (build_hash_table): New function.
387 (is_delayed_branch): Use hash table.
388 (print_insn): Renamed from print_insn_sparc, made static.
389 Build and use hash table. If !sparc64, ignore sparc64 insns,
390 and vice-versa if sparc64.
391 (print_insn_sparc, print_insn_sparc64): New functions.
392 (compare_opcodes): Move sparc64 opcodes to end.
393 Print commutative insns with constant second.
394 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
396 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
398 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
399 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
400 avoids printing a delay slot in a delay slot.
401 * sh-opc.h (sh_table): Fully bracket last entry.
403 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
405 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
407 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
409 * configure.in: Get host_makefile_frag from ${srcdir}.
411 * configure.in: Autoconfiscated. Check for string[s].h. Create
412 config.h from config.in. Don't set up sysdep.h link.
413 * sysdep.h: New file.
414 * configure, config.in: New files, generated from configure.in.
415 * Makefile.in: Updated to be processed autoconf-style.
416 (distclean): Keep sysdep.h. Remove config.log and config.cache.
417 (Makefile): Depend on config.status.
418 (config.status): New rule.
419 * configure.bat: Update Makefile substitutions.
421 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
423 * mips-opc.c (L1): Define.
424 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
425 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
428 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
430 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
431 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
432 have multiple add units but only a single logical unit.
434 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
435 shifted by 18, without any insertion or extraction function.
436 (insert_cr, extract_cr): Remove.
439 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
441 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
444 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
446 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
449 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
451 * mpw-config.in: Add sh and i386 configs, remove sparc config.
452 * sh-opc.h: Add copyright.
454 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
456 * Makefile.in (crunch-m68k): Delete extra target accidentally
457 checked in a while ago.
459 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
461 * sh-opc.h (sh_table): Add SH3 support.
463 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
465 * sh-opc.h: Added bsrf and braf.
467 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
469 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
470 bogus [ls]fm{ea,fd} patterns.
472 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
473 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
474 initialize it from memory. Make function static.
475 (print_insn_{big,little}_arm): New functions.
476 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
477 the correct endianness.
480 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
482 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
483 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
486 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
488 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
491 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
493 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
494 17th, so that it builds again using GCC as the compiler.
496 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
498 * mips-dis.c (print_insn_little_mips): Cast return value from
499 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
500 expects an unsigned long, and that might be fewer words of
501 argument storage (e.g., if bfd_vma is long long on a 32-bit
503 (print_insn_big_mips): Likewise with bfd_getb32 value.
504 (_print_insn_mips): Now static.
506 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
508 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
509 gcc memory hog problem with initializer is fixed.
512 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
514 * arc-opc.c (NULL): Define.
515 (arc_operands, insn fields u,s): Delete.
516 (arc_operands, insn fields a,b,c): Mark as signed.
517 (arc_opcodes): No longer const, links computed at run-time.
518 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
519 suffixes that affect the insn code.
520 (arc_opcodes): Resort table to macros are first.
521 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
522 (arc_opcodes, st [b] entry): Likewise.
523 (arc_opcodes, st [b,d] entry): Fix mask, value.
524 (arc_reg_names): Add entries for r29, r30, r31, r60.
525 (opcode_map, icode_map): New static globals.
526 (arc_opcode_init_tables): Initialize them.
527 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
528 (insert_shimmoffset): Signal error if register present.
530 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
533 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
535 Merge in support for Mac MPW as a host.
536 (Old change descriptions retained for informational value.)
538 * mpw-config.in (archname): Compute from the config.
539 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
541 * mpw-config.in (target_arch): Compute from canonical target.
542 (m68k, mips, powerpc, sparc): Add architectures.
543 * mpw-make.in (disassemble.c.o): Add.
544 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
546 * mpw-config.in (BFD_MACHINES): Set to a default value.
547 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
549 * mpw-make.in (CSEARCH): Add extra-include to search path.
551 * mpw-config.in (varargs.h): Don't create.
552 (sysdep.h): Create using forward-include.
553 * mpw-make.in (CSEARCH): Add include/mpw to search path.
555 * mpw-config.in: New file, MPW version of configure.in.
556 * mpw-make.in: New file, MPW version of Makefile.in.
559 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
561 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
562 Call arc_get_opcode_mach to map bfd mach number to opcode value.
563 (print_insn_*): Pass bfd mach number, not opcode version.
564 * arc-opc.c (arc_get_opcode_mach): New function.
567 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
569 * alpha-dis.c (print_insn_alpha): Put empty statement after
572 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
574 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
575 (low_sign_extend): Likewise.
576 (get_field): Delete unused function.
577 (set_field, deposit_14, deposit_21): Likewise.
579 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
581 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
584 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
586 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
588 * alpha-opc.h (OSF_ASMCODE): define
589 print pal-code names as defined in App C of the
590 Alpha Architecture Reference Manual
592 * alpha-dis.c: cleaned up output
593 print stylized code forms as defined in App A.4.3 of the
594 Alpha Architecture Reference Manual
596 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
598 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
600 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
603 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
605 * m68k-dis.c (opcode): New function. Returns address of opcode
606 table entry given index, even if the opcode table was split to
607 work around gcc bugs.
608 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
610 (BREAK_UP_BIG_DECL): Make secondary array static and const.
611 (reg_names): Now const.
612 (print_insn_arg): Arrays cacheFieldName and names now const.
613 (print_indexed): Array scales now const.
616 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
618 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
619 (print_insn_arc_{host,graphics,audio}): Likewise.
620 (print_insn): Add prototype.
621 (arc_get_disassembler): New arg `big_p'. Return little or big
622 print fn accordingly.
623 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
624 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
625 (arc_opval_supported): Likewise.
626 * disassemble.c (disassembler): Pass big endian flag to
627 arc_get_disassembler.
630 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
632 * ppc-opc.c: Sort recently added instructions by minor opcode
633 number within major opcode number.
635 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
637 * hppa-dis.c: Include libhppa.h.
639 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
641 * mips-opc.c: Change dli to use M_DLI, and add dla.
643 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
645 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
648 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
650 * arc-dis.c (arc_get_disassembler): Change argument to int,
651 one of bfd_mach_arc_xxx. All callers updated.
654 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
656 * mips-opc.c: Add r4650 mul instruction.
658 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
660 * mips-opc.c: Add uld and usd macros for unaligned double load and
663 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
665 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
666 mfdcr, mtdcr, icbt, iccci.
669 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
671 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
672 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
673 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
674 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
675 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
676 (insert_absaddr): New function.
678 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
680 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
681 New argument `cpu', pass it to arc_opcode_init_tables.
682 Document byte order dependencies. Ignore unsupported insns.
683 (arc_get_disassembler): New function.
684 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
685 print_insn_arc_audio): New functions.
686 * arc-opc.c (MULTSHIFT operand): Delete.
687 (UNSIGNED, SATURATION): New operands.
688 (mac, mul, mul64, mulu64): New insns.
689 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
690 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
691 (host,graphics,audio extended and auxiliary regs): Define.
692 (ss, sc, mh, ml): New suffixes.
693 (arc_opcode_supported, arc_opval_supported): New functions.
694 (insert_multshift, extract_multshift): Deleted.
695 * disassemble.c (disassembler, case bfd_arch_arc): Call
696 arc_get_disassembler to get disassembler routine.
699 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
701 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
702 signed char fields to shorts, more portable.
704 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
706 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
707 char fields as signed chars, since they may have negative values.
709 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
711 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
712 (mycroft@netbsd.org).
714 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
716 From "Logg, Ed" <elogg@ea.com>:
717 * ppc-opc.c (extract_bdm): Correct parenthezisation.
718 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
721 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
723 * ppc-opc.c: Changes based on patch from David Edelsohn
724 <edelsohn@mhpcc.edu>.
725 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
728 (insert_tbr): New static function.
729 (extract_tbr): New static function.
730 (XFXFXM_MASK, XFXM): Define.
731 (XSPRBAT_MASK, XSPRG_MASK): Define.
732 (powerpc_opcodes): Add instructions to access special registers by
733 name. Add mtcr and mftbu.
735 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
737 * mips-opc.c (P3): Define.
738 (mips_opcodes): Add mad and madu.
740 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
742 * configure.in: Add W65 support.
743 * disassemble.c: Likewise.
744 * w65-opc.h, w65-dis.c: New files.
746 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
748 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
752 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
754 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
756 * arc-opc.c (extract_reladdr): New function.
757 (insert_reladdr): Store address right-shifted by 2.
760 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
762 * mips-opc.c: Add dli as a synonym for li.
765 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
767 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
769 (extraction fns): Insn argument now array of two words. Return pointer
770 to value's table entry. All uses changed.
771 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
772 (insert_multshift, extract_multshift): New fns.
773 (arc_operands): Add support for cache bypass suffix. Add support for
774 predefined aux regs. Modifier bits moved to flags field.
775 (arc_opcodes): Likewise.
776 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
777 New insn rlc. Update to syntax in programmer's manual.
778 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
779 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
781 (arc_opcode_init_tables): New argument to indicate cpu type.
782 (insert_reg): Handle predefined aux regs.
783 (extract_reg): Likewise.
784 (lookup_register): New fn.
785 * arc-dis.c (arc_condition_codes): Deleted.
786 (print_insn_arc): Handle insns with 32 bit immediate constants better.
787 Clean up modifier handling. Handle predefined aux regs.
790 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
792 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
793 print something for reserved opcode values, even if it won't
796 * mips-dis.c (_print_insn_mips): When initializing, shift right
797 and mask, to avoid sign extension problems on the Alpha.
799 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
803 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
805 * configure.in: Add ARC support.
806 * disassemble.c: Likewise.
807 * arc-dis.c, arc-opc.c: New files.
810 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
812 * sh-opc.h (mov.l gbr): Get direction right.
813 * sh-dis.c (print_insn_shx): New function.
814 (print_insn_shl, print_insn_sh): Call print_insn_shx to
815 print opcodes with right byte order.
817 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
819 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
820 to avoid conflicts with getopt.
822 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
824 * hppa-dis.c (print_insn_hppa): Read the instruction using
825 bfd_getb32, so that it works on a little endian or 64 bit host.
826 Remove unused local variable op.
828 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
830 * mips-opc.c: Use or instead of addu for pseudo-op move, since
831 addu does not work correctly if -mips3.
833 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
835 * a29k-dis.c (print_special): Add special register names defined
836 on 29030, 29040 and 29050.
837 (print_insn): Handle new operand type 'I'.
839 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
841 * Makefile.in (INSTALL): Use top level install.sh script.
843 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
845 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
846 that it works on a little endian host.
848 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
850 * configure.in: Use ${config_shell} when running config.bfd.
852 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
854 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
856 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
858 * a29k-dis.c (print_insn): Print the opcode.
860 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
862 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
864 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
866 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
868 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
870 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
871 which store a value into memory.
873 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
875 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
876 * arm-dis.c, arm-opc.h: New files.
878 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
880 * Makefile.in (ns32k-dis.o): Add dependency.
881 * ns32k-dis.c (print_insn_arg): Declare initialized local as
882 string, not as array of chars.
884 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
886 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
888 * sparc-opc.c: Added sparclite extended FP operations, and
889 versions of v9 impdep* instructions permitting specification of
892 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
894 * i960-dis.c (reg_names): Now const.
895 (struct sparse_tabent): New type, copied from array type in mem
897 (ctrl): Local static array ctrl_tab now const.
898 (cobr): Local static array cobr_tab now const.
899 (mem): Local variables reg1, reg2, reg3 now point to const. Local
900 static variable mem_tab no longer explicitly initialized. Changed
901 mem_init to const array of struct sparse_tabent.
902 (reg): Local static variable reg_tab no longer explicitly
903 initialized. Changed reg_init to const array of struct
905 (ea): Local static array scale_tab now const.
907 start-sanitize-i960xl
908 * i960-dis.c (reg): Added i960XL instructions to reg_init table.
912 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
914 * configure.bat: the disassember needs to be enabled for
915 "objdump -d" to work in djgpp.
917 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
919 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
920 (invalid_float): Enabled general version, doesn't require running
921 on ns32k host. Changed to take char* argument, and test for
922 explicitly specified sizes, instead of using sizeof() on host CPU
924 (INVALID_FLOAT): Cast first argument.
925 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
926 list_P032, list_M032): Now const.
927 (optlist, list_search): Made appropriate arguments now point to
929 (print_insn_arg): Changed static array of one-character-string
930 pointers into a static const array of characters; fixed sprintf
931 statement accordingly.
933 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
935 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
936 from distribution. A ns32k-dis.c from a previous distribution has
937 been brought up to date and supports the new interface.
939 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
941 * configure.in: add bfd_ns32k_arch target support.
943 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
944 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
946 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
948 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
951 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
953 * h8300-dis.c, mips-dis.c: Don't use true and false.
955 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
957 * configure.in: Change --with-targets to --enable-targets.
959 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
961 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
962 opcodes to the first instruction with that opcode, to speed
963 disassembly of large files. From ralphc@pyramid.com (Ralph
966 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
968 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
970 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
972 * configure.bat: update to latest makefile.in
974 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
976 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
977 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
978 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
979 slot insn is in a delay slot.
980 * z8k-opc.h: (resflg): Fix patterns.
981 * h8500-opc.h Fix CR insn patterns.
983 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
985 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
986 "cmpl" before POWER versions, so that gas -many uses them.
988 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
990 * disassemble.c: New file.
991 * Makefile.in (OFILES): Add disassemble.o.
992 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
993 * configure.in: Define ARCHDEFS in Makefile. Code taken from
994 binutils/configure.in.
996 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
997 opcode being examined.
999 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1001 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
1002 (insert_ral, insert_ram, insert_ras): New functions.
1003 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
1004 RAS for store with update.
1006 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1008 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
1009 (edelsohn@npac.syr.edu).
1011 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1013 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
1016 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
1018 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
1020 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1022 * ppc-opc.c (powerpc_operands): The signedp field has been
1023 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
1024 instead. Add new operand SISIGNOPT.
1025 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
1026 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
1027 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
1030 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1032 * i386-dis.c (struct private): Renamed to dis_private. `private'
1033 is a reserved word for dynix cc.
1035 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1037 * configure.in: Change error message to refer to bfd/config.bfd
1038 rather than bfd/configure.in.
1040 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
1042 * ppc-opc.c: Define POWER2 as short alias flag.
1043 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
1046 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1048 * i960-dis.c (print_insn_i960): Don't read a second word for
1049 opcodes 0, 1, 2 and 3.
1051 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1053 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
1055 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1057 * m68881-ext.c: Removed; no longer used.
1058 * Makefile.in: Changed accordingly.
1060 * m68k-dis.c (ext_format_68881): Don't declare.
1061 (print_insn_m68k): If an instruction uses place 'i', it uses at
1062 least four fixed bytes.
1063 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
1064 extended float, convert to double using floatformat_to_double, not
1065 ieee_extended_to_double, and fetch the data before converting it.
1067 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1069 * mips-opc.c: It's sqrt.s, not sqrt.w. From
1070 davidj@ICSI.Berkeley.EDU (David Johnson).
1072 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1074 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
1075 PowerPC uses bdnz[l][a].
1077 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1079 * dis-buf.c, i386-dis.c: Include sysdep.h.
1081 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1083 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
1085 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
1086 by Motorola PowerPC 601 with PPC_OPCODE_601.
1087 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
1088 Disassemble Motorola PowerPC 601 instructions as well as normal
1089 PowerPC instructions.
1091 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1093 * i960-dis.c (reg, mem): Just use a static array instead of
1096 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
1098 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
1099 condition name index if this is for a negated condition.
1101 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
1102 Floating point format for 'H' operand is backwards from normal
1103 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
1104 operands (fmpyadd and fmpysub), handle bizarre register
1105 translation correctly for single precision format.
1107 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
1108 or 'I' operands if the next format specifier is 'M' (fcmp
1109 condition completer).
1111 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1113 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
1114 single number giving a bitmask for the MB and ME fields of an M
1115 form instruction. Change NB to accept 32, and turn it into 0;
1116 also turn 0 into 32 when disassembling. Seperated SH from NB.
1117 (insert_mbe, extract_mbe): New functions.
1118 (insert_nb, extract_nb): New functions.
1119 (SC_MASK): Mask out SA and LK bits.
1120 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
1121 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
1122 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
1123 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
1124 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
1125 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
1126 (powerpc_macros): Define table of macro definitions.
1127 (powerpc_num_macros): Define.
1129 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
1130 if PPC_OPERAND_NEXT is set.
1132 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1134 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
1135 char. Retrieve contents using bfd_getl32 instead of shifting.
1137 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1139 * ppc-opc.c: New file. Opcode table for PowerPC, including
1140 opcodes for POWER (RS/6000).
1141 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
1142 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
1143 (CFILES): Add ppc-dis.c.
1144 (ppc-dis.o, ppc-opc.o): New targets.
1145 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
1147 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
1149 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
1150 No space before 'u', 'f', or 'N'.
1152 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
1154 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
1155 farther than we should.
1157 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
1159 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1161 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
1163 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1165 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
1166 needs it, to prevent reading past the end of a section.
1168 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1170 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
1171 Removed t,A case for la; always use t,A(b) case.
1173 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1175 From Ted Lemen <mellon@pepper.ncd.com>
1176 * mips-dis.c (print_insn_arg): Handle 'k'.
1177 * mips-opc.c: Make cache use k, not t.
1179 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1181 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
1182 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
1183 FLOAT_FORMAT_CODE to put out floating point register names.
1185 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1187 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
1189 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1191 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
1193 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1195 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
1196 larger than 32. Moved dsxx32 variants first for disassembler.
1198 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1200 * z8kgen.c, z8k-opc.h: Add full lda information.
1202 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
1204 * hppa-dis.c (print_insn_hppa): Do not emit a space after
1205 movb instructions. Any necessary space will be emitted by
1206 the code to handle nullification completers.
1208 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1210 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
1212 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1214 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
1215 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
1217 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1219 * mips-opc.c: Correct lwu opcode value (book had it wrong).
1221 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1223 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
1224 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
1226 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
1228 * m88k-dis.c (m88kdis): comment change. Remove space after
1230 (printop): handle new arg types DEC and XREG for m88110.
1232 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
1234 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
1235 type for absolute branch addresses. Delete special
1236 "ble" and "be" code in 'W' operand code.
1238 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1240 * mips-opc.c: Set hazard information correctly for branch
1241 likely instructions.
1243 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1245 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
1246 info->fprintf_func for printing and info->print_address_func for
1249 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1251 * mips-opc.c: Set INSN_TRAP for tXX instructions.
1253 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1255 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
1256 Corrected second case of "b" for disassembler.
1258 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1260 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
1261 to BFD swapping routines to correspond to BFD name changes.
1263 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1265 * mips-opc.c: Change div machine instruction to be z,s,t rather
1266 than s,t. Change div macro to be d,v,t rather than d,s,t.
1267 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
1268 rem and remu which generates only the corresponding div
1269 instruction. This is for compatibility with the MIPS assembler,
1270 which only generates the simple machine instruction when an
1271 explicit destination of $0 is used.
1272 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
1274 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1276 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
1277 WR_31 hazard for bal, bgezal, bltzal.
1279 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1281 * hppa-dis.c (print_insn_hppa): Use print function
1282 from within the disassemble_info, not fprintf_filtered.
1284 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1286 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
1287 Law, law@cs.utah.edu.)
1289 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1291 * mips-opc.c ("absu"): Removed.
1294 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1296 * mips-opc.c: Added r6000 and r4000 instructions and macros.
1297 Changed hazard information to distinguish between memory load
1298 delays and coprocessor load delays.
1300 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1302 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
1304 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1306 * configure.in: Don't pass cpu to config.bfd.
1308 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1310 * m88k-dis.c (m88kdis): Make class unsigned.
1312 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
1314 * alpha-dis.c (print_insn_alpha): One branch format case was
1315 missing the instruction name.
1317 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1319 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
1320 Add the arch-specific auxiliary files.
1321 (OFILES): Remove the arch-specific auxiliary files
1322 and use BFD_MACHINES instead of DIS_LIBS.
1323 * configure.in: Set BFD_MACHINES based on --with-targets option.
1325 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1327 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
1330 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1332 * sparc-opc.c: Change CONST to const to deal with gcc
1333 -Dconst=__const -traditional.
1335 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1337 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
1338 coprocessor instructions out of #if 0, and made them use new
1341 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1343 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
1345 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
1347 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
1348 instruction, for use by the disassembler.
1350 * sparc-dis.c (SEX): Add sign extension macro. Replace many
1351 hand-coded sign extensions that depended on 32-bit host ints.
1352 FIXME, we still depend on big-endian host bitfield ordering.
1353 (sparc_print_insn): Set the insn_info_valid field, and the
1354 other fields that describe the instruction being printed.
1356 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
1358 * sparc-opc.c (call): Accept all 6 addressing modes valid for
1359 `jmp' instead of just one of them.
1361 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
1363 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
1364 (fput_fp_reg_r): Renamed from fput_reg_r.
1365 (fput_fp_reg): New function.
1366 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
1368 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
1370 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
1372 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
1374 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
1376 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
1377 don't output a space.
1379 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
1381 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
1383 * mips-opc.c: New file, containing opcode table from
1384 ../include/opcode/mips.h.
1385 * Makefile.in: Add it.
1387 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1389 * m88k-dis.c: New file, moved in from gdb and changed to use the
1390 new dis-asm.h disassembler interface.
1391 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
1392 (m88k-dis.o): New target.
1394 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
1396 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
1397 argument string const char * to correspond to opcode/mips.h.
1399 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
1401 * mips-dis.c: Updated to account for name changes in new version
1403 * Makefile.in: Added header file dependencies.
1405 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
1407 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
1409 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1411 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
1412 extend, rather than shifts.
1414 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
1416 * Makefile.in: Undo 15 June change.
1418 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
1420 * m68k-dis.c (print_insn_arg): Change return value to byte count
1422 * m68k-dis.c: Re-write to detect invalid operands before
1423 printing anything, so we can handle this the same way we
1424 handle invalid opcodes.
1426 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1428 * sh-dis.c, sh-opc.h: Understand some more opcodes.
1430 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
1432 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
1435 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1437 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
1439 * configure.in: Do make sysdep.h link.
1440 * Makefile.in: Search ../include. Don't search ../bfd.
1442 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
1444 Changes from Jeff Law, law@cs.utah.edu:
1445 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
1446 Do not print a space before the completers specified by
1449 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
1451 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
1452 defined, since gdb has been fixed.
1454 Changes from Jeff Law, law@cs.utah.edu:
1455 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
1456 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
1457 be a *disassemble_info, not a *FILE.
1458 * hppa-dis.c: Support 'd', '!', and 'a'.
1459 * hppa-dis.c: Support 's' to extract a 2 bit space register.
1460 * hppa-dis.c: Delete cases which are no longer needed.
1462 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
1464 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
1466 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1468 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
1471 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
1473 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
1474 * configure.in: No longer need to configure to get sysdep.h.
1476 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
1478 * Patches from Jeffrey Law <law@cs.utah.edu>.
1479 * hppa-dis.c: Support 'I', 'J', and 'K' in output
1480 templates for 1.1 FP computational instructions.
1482 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1484 * h8500-dis.c (print_insn_h8500): Address argument is type
1486 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
1489 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
1490 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
1492 * sparc-dis.c (compare_opcodes): Move static declaration to
1495 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1497 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
1498 instruction, remove unimp hack from 'l' argument.
1500 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
1502 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
1505 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
1507 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
1508 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
1511 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1513 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
1514 arrays of string pointers to 2-d arrays of chars, to save
1517 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
1519 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
1520 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
1522 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1524 * hppa-dis.c: New file from Utah, adapted to new disassembler
1526 * Makefile.in: Include it.
1528 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1530 * sh-dis.c, sh-opc.h: New files.
1532 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1534 * alpha-dis.c, alpha-opc.h: New files.
1536 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1538 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
1541 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
1543 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
1545 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
1547 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
1550 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
1552 * sparc-dis.c: Use fprintf_func a few places where I forgot,
1553 and double percent signs a few places.
1555 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
1557 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
1558 Use info->print_address_func not print_address.
1560 * dis-buf.c (generic_print_address): New function.
1562 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1564 * Makefile.in: Add sparc-dis.c.
1565 sparc-dis.c: New file, merges binutils and gdb versions as follows:
1567 Add `add' instruction to the set that get checked
1568 for a preceding `sethi' in order to print an absolute address.
1569 * (print_insn): Disassembly prefers real instructions.
1570 (is_delayed_branch): Speed up.
1571 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
1572 Still missing some float ops, and needs testing.
1573 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
1574 F_ALIAS. Use printf, not fprintf, when not passing a file
1576 (compare_opcodes): Check that identical instructions have
1577 identical opcodes, complain otherwise.
1580 * Include reg_names.
1582 Use dis-asm.h/read_memory_func interface.
1584 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
1586 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
1587 deliberately return non-zero to setjmp from longjmp. Otherwise
1588 this code fails to compile.
1590 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
1592 * m68k-dis.c: Fix prototype for fetch_arg().
1594 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1596 * dis-buf.c: New file, for new read_memory_func interface.
1597 Makefile.in (OFILES): Include it.
1598 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
1599 Use new read_memory_func interface.
1601 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1603 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
1604 * h8500-opc.h: Fix couple of opcodes.
1606 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
1608 * Makefile.in: add dvi & installcheck targets
1610 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
1612 * Makefile.in: Update for h8500-dis.c.
1614 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1616 * h8500-dis.c, h8500-opc.h: New files
1618 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
1620 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
1621 ../include/dis-asm.h.
1622 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
1623 and ../gdb/m68k-pinsn.c).
1624 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
1625 and ../gdb/i386-pinsn.c).
1626 * m68881-ext.c: New file. Moved definition of
1627 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
1628 * Makefile.in: Adjust for new files.
1629 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
1630 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
1631 can be dis-assembled.
1633 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1635 * mips-dis.c (print_insn_arg): Now returns void.
1637 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
1639 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
1640 files that use the macros.
1642 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1644 * mips-dis.c: New file, from gdb/mips-pinsn.c.
1645 * Makefile.in (DIS_LIBS): Added mips-dis.o.
1646 (CFILES): Added mips-dis.c.
1648 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1650 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
1651 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
1653 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
1655 * Makefile.in: Improve *clean rules.
1656 * configure.in: Allow a default host.
1658 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1660 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
1661 files include other sysdep files
1663 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1665 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
1667 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
1669 * configure.in: For host support, use ../bfd/configure.host
1670 so it stays in sync with the ../bfd/hosts database.
1672 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1674 * configure.in: use cpu-vendor-os triple instead of nested cases
1676 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
1678 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
1679 *always* the wrong one.
1681 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1683 * z8kgen.c: added copyright info
1685 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1687 * z8k-dis.c (unparse_instr): prettier tabs
1688 * z8kgen.c -> z8k-opc.h: bug fixes in tables
1690 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
1692 * configure.in: Add ncr* configuration.
1693 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
1694 picayune ANSI compilers happy.
1696 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
1698 * configure.in (i386): Make i386 and i486 synonymous for now.
1699 * configure.in (i[34]86-*-sysv4): Add my_host definition.
1701 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
1703 * Makefile.in (install): Fix typo.
1705 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
1707 * Makefile.in (make): Remove obsolete crud.
1708 (sparc-opc.o): Avoid Sun Make VPATH bug.
1710 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
1712 * Makefile.in: since there are no SUBDIRS, remove rule and
1713 references of subdir_do.
1715 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
1717 * Makefile.in (install): Get the library name right here too.
1718 Don't install bfd.h, since it's unrelated to this library. No
1719 subdirs to recurse into, either.
1720 (CFILES): The source file has a .c suffix, not .o.
1722 * sparc-opc.c: New file, moved from BFD.
1723 * Makefile.in (OFILES): Build it.
1725 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
1727 * z8k-dis.c: fixed forward refferences of some declarations.
1729 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
1731 * Makefile.in: get the name of the library right
1733 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1735 * z8k-dis.c: knows how to disassemble z8k stuff
1736 * z8k-opc.h: new file full of z8000 opcodes
1740 version-control: never