1 2006-05-04 Thiemo Seufer <ths@mips.com>
2 Nigel Stephens <nigel@mips.com>
3 David Ung <davidu@mips.com>
5 * mips-dis.c (mips_arch_choices): Add smartmips instruction
6 decoding to MIPS32 and MIPS32R2. Limit DSP decoding to release
7 2 ISAs. Add MIPS3D decoding to MIPS32R2. Add MT decoding to
9 * mips-opc.c: fix random typos in comments.
10 (INSN_SMARTMIPS): New defines.
11 (mips_builtin_opcodes): Add paired single support for MIPS32R2.
12 Move bc3f, bc3fl, bc3t, bc3tl downwards. Move flushi, flushd,
13 flushid, wb upwards. Move cfc3, ctc3 downwards. Rework the
14 FP_S and FP_D flags to denote single and double register
15 accesses separately. Move dmfc3, dmtc3, mfc3, mtc3 downwards.
16 Allow jr.hb and jalr.hb for release 1 ISAs. Allow luxc1, suxc1
17 for MIPS32R2. Add SmartMIPS instructions. Add two-argument
18 variants of bc2f, bc2fl, bc2t, bc2tl. Add mfhc2, mthc2 to
20 * mips16-opc.c (mips16_opcodes): Add sdbbp instruction.
22 2006-05-03 Thiemo Seufer <ths@mips.com>
24 * mips-opc.c (mips_builtin_opcodes): Fix mftr argument order.
26 2006-05-02 Thiemo Seufer <ths@mips.com>
27 Nigel Stephens <nigel@mips.com>
28 David Ung <davidu@mips.com>
30 * mips-dis.c (print_insn_args): Force mips16 to odd addresses.
31 (print_mips16_insn_arg): Force mips16 to odd addresses.
33 2006-04-30 Thiemo Seufer <ths@mips.com>
34 David Ung <davidu@mips.com>
36 * mips-opc.c (mips_builtin_opcodes): Add udi instructions
38 * mips-dis.c (print_insn_args): Adds udi argument handling.
40 2006-04-28 James E Wilson <wilson@specifix.com>
42 * m68k-dis.c (match_insn_m68k): Restore fprintf_func before printing
45 2006-04-28 Thiemo Seufer <ths@mips.com>
46 David Ung <davidu@mips.com>
47 Nigel Stephens <nigel@mips.com>
49 * mips-dis.c (mips_cp0sel_names_mips3264r2): Add MT register
52 2006-04-28 Thiemo Seufer <ths@mips.com>
53 Nigel Stephens <nigel@mips.com>
54 David Ung <davidu@mips.com>
56 * mips-dis.c (print_insn_args): Add mips_opcode argument.
57 (print_insn_mips): Adjust print_insn_args call.
59 2006-04-28 Thiemo Seufer <ths@mips.com>
60 Nigel Stephens <nigel@mips.com>
62 * mips-dis.c (print_insn_args): Print $fcc only for FP
63 instructions, use $cc elsewise.
65 2006-04-28 Thiemo Seufer <ths@mips.com>
66 Nigel Stephens <nigel@mips.com>
68 * opcodes/mips-dis.c (mips16_to_32_reg_map, mips16_reg_names):
69 Map MIPS16 registers to O32 names.
70 (print_mips16_insn_arg): Use mips16_reg_names.
72 2006-04-26 Julian Brown <julian@codesourcery.com>
74 * arm-dis.c (print_insn_neon): Disassemble floating-point constant
77 2006-04-26 Nathan Sidwell <nathan@codesourcery.com>
78 Julian Brown <julian@codesourcery.com>
80 * opcodes/arm-dis.c (coprocessor_opcodes): Add %A, %B, %k, convert
81 %<code>[zy] into %[zy]<code>. Expand meaning of %<bitfield>['`?].
82 Add unified load/store instruction names.
83 (neon_opcode_table): New.
84 (arm_opcodes): Expand meaning of %<bitfield>['`?].
85 (arm_decode_bitfield): New.
86 (print_insn_coprocessor): Add pc argument. Add %A & %B specifiers.
87 Use arm_decode_bitfield and adjust numeric specifiers. Adjust %z & %y.
88 (print_insn_neon): New.
89 (print_insn_arm): Adjust print_insn_coprocessor call. Call
90 print_insn_neon. Use arm_decode_bitfield and adjust numeric specifiers.
91 (print_insn_thumb32): Likewise.
93 2006-04-19 Alan Modra <amodra@bigpond.net.au>
95 * Makefile.am: Run "make dep-am".
96 * Makefile.in: Regenerate.
98 2006-04-19 Alan Modra <amodra@bigpond.net.au>
100 * avr-dis.c (avr_operand): Warning fix.
102 * configure: Regenerate.
104 2006-04-16 Daniel Jacobowitz <dan@codesourcery.com>
106 * po/POTFILES.in: Regenerated.
108 2006-04-12 Hochstein <hochstein@algo.informatik.tu-darmstadt.de>
111 * avr-dis.c (avr_operand): Arrange for a comment to appear before
112 the symolic form of an address, so that the output of objdump -d
115 2006-04-10 DJ Delorie <dj@redhat.com>
117 * m32c-asm.c: Regenerate.
119 2006-04-06 Carlos O'Donell <carlos@codesourcery.com>
121 * Makefile.am: Add install-html target.
122 * Makefile.in: Regenerate.
124 2006-04-06 Nick Clifton <nickc@redhat.com>
126 * po/vi/po: Updated Vietnamese translation.
128 2006-03-31 Paul Koning <ni1d@arrl.net>
130 * pdp11-opc.c (pdp11_opcodes): Fix opcode for SEC instruction.
132 2006-03-16 Bernd Schmidt <bernd.schmidt@analog.com>
134 * bfin-dis.c (decode_dsp32shiftimm_0): Simplify and correct the
135 logic to identify halfword shifts.
137 2006-03-16 Paul Brook <paul@codesourcery.com>
139 * arm-dis.c (arm_opcodes): Rename swi to svc.
140 (thumb_opcodes): Ditto.
142 2006-03-13 DJ Delorie <dj@redhat.com>
144 * m32c-asm.c: Regenerate.
145 * m32c-desc.c: Likewise.
146 * m32c-desc.h: Likewise.
147 * m32c-dis.c: Likewise.
148 * m32c-ibld.c: Likewise.
149 * m32c-opc.c: Likewise.
150 * m32c-opc.h: Likewise.
152 2006-03-10 DJ Delorie <dj@redhat.com>
154 * m32c-desc.c: Regenerate with mul.l, mulu.l.
155 * m32c-opc.c: Likewise.
156 * m32c-opc.h: Likewise.
159 2006-03-09 Nick Clifton <nickc@redhat.com>
161 * po/sv.po: Updated Swedish translation.
163 2006-03-07 H.J. Lu <hongjiu.lu@intel.com>
166 * i386-dis.c (REP_Fixup): New function.
167 (AL): Remove duplicate.
172 (indirDXr): Likewise.
175 (dis386): Updated entries of ins, outs, movs, lods and stos.
177 2006-03-05 Nick Clifton <nickc@redhat.com>
179 * cgen-ibld.in (insert_normal): Cope with attempts to insert a
180 signed 32-bit value into an unsigned 32-bit field when the host is
182 * fr30-ibld.c: Regenerate.
183 * frv-ibld.c: Regenerate.
184 * ip2k-ibld.c: Regenerate.
185 * iq2000-asm.c: Regenerate.
186 * iq2000-ibld.c: Regenerate.
187 * m32c-ibld.c: Regenerate.
188 * m32r-ibld.c: Regenerate.
189 * openrisc-ibld.c: Regenerate.
190 * xc16x-ibld.c: Regenerate.
191 * xstormy16-ibld.c: Regenerate.
193 2006-03-03 Shrirang Khisti <shrirangk@kpitcummins.com)
195 * xc16x-asm.c: Regenerate.
196 * xc16x-dis.c: Regenerate.
198 2006-02-27 Carlos O'Donell <carlos@codesourcery.com>
200 * po/Make-in: Add html target.
202 2006-02-27 H.J. Lu <hongjiu.lu@intel.com>
204 * i386-dis.c (IS_3BYTE_OPCODE): New for 3-byte opcodes used by
205 Intel Merom New Instructions.
206 (THREE_BYTE_0): Likewise.
207 (THREE_BYTE_1): Likewise.
208 (three_byte_table): Likewise.
209 (dis386_twobyte): Use THREE_BYTE_0 for entry 0x38. Use
210 THREE_BYTE_1 for entry 0x3a.
211 (twobyte_has_modrm): Updated.
212 (twobyte_uses_SSE_prefix): Likewise.
213 (print_insn): Handle 3-byte opcodes used by Intel Merom New
216 2006-02-24 David S. Miller <davem@sunset.davemloft.net>
218 * sparc-dis.c (v9_priv_reg_names): Add "gl" entry.
219 (v9_hpriv_reg_names): New table.
220 (print_insn_sparc): Allow values up to 16 for '?' and '!'.
221 New cases '$' and '%' for read/write hyperprivileged register.
222 * sparc-opc.c (sparc_opcodes): Add new entries for UA2005
223 window handling and rdhpr/wrhpr instructions.
225 2006-02-24 DJ Delorie <dj@redhat.com>
227 * m32c-desc.c: Regenerate with linker relaxation attributes.
228 * m32c-desc.h: Likewise.
229 * m32c-dis.c: Likewise.
230 * m32c-opc.c: Likewise.
232 2006-02-24 Paul Brook <paul@codesourcery.com>
234 * arm-dis.c (arm_opcodes): Add V7 instructions.
235 (thumb32_opcodes): Ditto. Handle V7M MSR/MRS variants.
236 (print_arm_address): New function.
237 (print_insn_arm): Use it. Add 'P' and 'U' cases.
238 (psr_name): New function.
239 (print_insn_thumb32): Add 'U', 'C' and 'D' cases.
241 2006-02-23 H.J. Lu <hongjiu.lu@intel.com>
243 * ia64-opc-i.c (bXc): New.
245 (OpX2TaTbYaXcC): Likewise.
248 (ia64_opcodes_i): Add instructions for tf.
250 * ia64-opc.h (IMMU5b): New.
252 * ia64-asmtab.c: Regenerated.
254 2006-02-23 H.J. Lu <hongjiu.lu@intel.com>
256 * ia64-gen.c: Update copyright years.
257 * ia64-opc-b.c: Likewise.
259 2006-02-22 H.J. Lu <hongjiu.lu@intel.com>
261 * ia64-gen.c (lookup_regindex): Handle ".vm".
262 (print_dependency_table): Handle '\"'.
264 * ia64-ic.tbl: Updated from SDM 2.2.
265 * ia64-raw.tbl: Likewise.
266 * ia64-waw.tbl: Likewise.
267 * ia64-asmtab.c: Regenerated.
269 * ia64-opc-b.c (ia64_opcodes_b): Add vmsw.0 and vmsw.1.
271 2006-02-17 Shrirang Khisti <shrirangk@kpitcummins.com>
272 Anil Paranjape <anilp1@kpitcummins.com>
273 Shilin Shakti <shilins@kpitcummins.com>
275 * xc16x-desc.h: New file
276 * xc16x-desc.c: New file
277 * xc16x-opc.h: New file
278 * xc16x-opc.c: New file
279 * xc16x-ibld.c: New file
280 * xc16x-asm.c: New file
281 * xc16x-dis.c: New file
282 * Makefile.am: Entries for xc16x
283 * Makefile.in: Regenerate
284 * cofigure.in: Add xc16x target information.
285 * configure: Regenerate.
286 * disassemble.c: Add xc16x target information.
288 2006-02-11 H.J. Lu <hongjiu.lu@intel.com>
290 * i386-dis.c (dis386_twobyte): Use "movZ" for debug register
293 2006-02-11 H.J. Lu <hongjiu.lu@intel.com>
295 * i386-dis.c ('Z'): Add a new macro.
296 (dis386_twobyte): Use "movZ" for control register moves.
298 2006-02-10 Nick Clifton <nickc@redhat.com>
300 * iq2000-asm.c: Regenerate.
302 2006-02-07 Nathan Sidwell <nathan@codesourcery.com>
304 * m68k-dis.c (print_insn_m68k): Use bfd_m68k_mach_to_features.
306 2006-01-26 David Ung <davidu@mips.com>
308 * mips-opc.c: Add I33 masks to these MIPS32R2 instructions: prefx,
309 ceil.l.d, ceil.l.s, cvt.d.l, cvt.l.d, cvt.l.s, cvt.s.l, floor.l.d,
310 floor.l.s, ldxc1, lwxc1, madd.d, madd.s, msub.d, msub.s, nmadd.d,
311 nmadd.s, nmsub.d, nmsub.s, recip.d, recip.s, round.l.d, rsqrt.d,
312 rsqrt.s, sdxc1, swxc1, trunc.l.d, trunc.l.s.
314 2006-01-18 Arnold Metselaar <arnoldm@sourceware.org>
316 * z80-dis.c (struct buffer, prt_d, prt_d_n, arit_d, ld_r_d,
317 ld_d_r, pref_xd_cb): Use signed char to hold data to be
319 * z80-dis.c (TXTSIZ): Increase buffer size to 24, this fixes
320 buffer overflows when disassembling instructions like
322 * z80-dis.c (opc_ind, pref_xd_cb): Suppress '+' in an indexed
323 operand, if the offset is negative.
325 2006-01-17 Arnold Metselaar <arnoldm@sourceware.org>
327 * z80-dis.c (struct buffer, prt_d, prt_d_n, pref_xd_cb): Use
328 unsigned char to hold data to be disassembled.
330 2006-01-17 Andreas Schwab <schwab@suse.de>
333 * disassemble.c (disassemble_init_for_target): Set
334 disassembler_needs_relocs for bfd_arch_arm.
336 2006-01-16 Paul Brook <paul@codesourcery.com>
338 * m68k-opc.c (m68k_opcodes): Fix opcodes for ColdFire f?abss,
339 f?add?, and f?sub? instructions.
341 2006-01-16 Nick Clifton <nickc@redhat.com>
343 * po/zh_CN.po: New Chinese (simplified) translation.
344 * configure.in (ALL_LINGUAS): Add "zh_CH".
345 * configure: Regenerate.
347 2006-01-05 Paul Brook <paul@codesourcery.com>
349 * m68k-opc.c (m68k_opcodes): Add missing ColdFire fdsqrtd entry.
351 2006-01-06 DJ Delorie <dj@redhat.com>
353 * m32c-desc.c: Regenerate.
354 * m32c-opc.c: Regenerate.
355 * m32c-opc.h: Regenerate.
357 2006-01-03 DJ Delorie <dj@redhat.com>
359 * cgen-ibld.in (extract_normal): Avoid memory range errors.
360 * m32c-ibld.c: Regenerated.
362 For older changes see ChangeLog-2005
368 version-control: never