2 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
4 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
5 * dvp-dis.c (*): Likewise.
8 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
10 * configure, aclocal.m4: Rebuild with new libtool.
13 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
15 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
16 instructions use a PC relative branch, not absolute.
19 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
21 * configure.in: Set libtool_enable_shared rather than
22 libtool_shared. Remove diversion hack.
23 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
25 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
27 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
28 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
30 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
32 * tic30-dis.c: New file.
33 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
34 * configure.in: Handle bfd_tic30_arch.
35 * Makefile.am: Rebuild dependencies.
36 (CFILES): Add tic30-dis.c
37 (ALL_MACHINES): Add tic30-dis.lo.
38 * configure, Makefile.in: Rebuild.
41 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
43 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
44 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
45 macwhi-a and macwlo-a instructions.
49 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
51 * dvp-opc.c, fixed encoding of a bunch of instructions to
52 be consistent with the asmvu assembler (and inconsistent
53 with the specification).
55 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
57 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
58 in the opcode table. The pkemscalf instruction must come first.
60 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
62 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
65 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
67 * m32r-opc.h (HAVE_CPU_M32R): Define.
70 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
72 * dvp-dis.c, dvp-opc.c: New files.
73 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
74 * configure: Regenerate.
75 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
76 (dvp-dis.lo,dvp-opc.lo): Add rules for.
77 (mips-dis.lo): Compile with @archdefs@.
78 * Makefile.in: Regenerate.
79 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
80 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
83 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
85 * v850-opc.c (insertion routines): If both alignment and size is
86 wrong then report this.
88 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
90 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
91 Only recognize instructions for the current target_processor.
93 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
95 * d10v-dis.c (PC_MASK): Correct value.
96 (print_operand): If there's a reloc, don't calculate the
97 address because they could be in different sections.
100 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
102 * cgen.sh: Rewrite to be like simulator's version.
103 * Makefile.am (cgen): Update call to cgen.sh.
104 * Makefile.in: Regenerate
107 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
109 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
110 instruction after the 4650's "mul" instruction; nobody's using the
111 4010 these days. If object files someday indicate which processor
112 variant they're intended for, we can do a better job at this.
115 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
117 * mips-opc.c (c.lt.s): Add r5900 variant.
121 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
123 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
124 table provided entry size. Use CGEN_INSN_MNEMONIC.
125 (cgen_parse_keyword): Rewrite.
126 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
127 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
128 * cgen-opc.c: Clean up pass over `struct foo' usage.
129 (cgen_keyword_lookup_value): Handle "" entry.
130 (cgen_keyword_add): Likewise.
131 start-sanitize-cygnus
132 * Makefile.am: Add cgen support.
133 * Makefile.in: Regenerate.
134 * configure.in: Add cgen support.
135 * configure: Regenerate.
136 * aclocal.m4: Regenerate.
137 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
140 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
142 * mips-opc.c: Add FP_D to s.d instruction flags.
144 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
146 * m68k-opc.c (halt, pulse): Enable them on the 68060.
149 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
151 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
152 PC relative offset forms before the 15 bit forms. An assembler command
153 line option now chooses the default.
157 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
159 * mips-opc.c: Add many missing r5900 instructions.
163 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
165 * d30v-opc.c (d30v_opcode_table): Set new flags bits
166 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
169 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
171 * configure: Only build libopcodes shared if --enable-shared's value
172 was `yes', or was set to `*opcodes*'.
173 * aclocal.m4: Likewise.
174 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
175 original source of this bit of code. It's not clear what the best fix
179 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
181 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
184 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
186 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
187 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
188 offset forms before the 15 bit forms, to default to the long forms.
191 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
193 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
195 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
197 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
198 symbol if none is present.
199 (print_insn_big_arm): Prevent examination of stored symbol if
202 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
204 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
206 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
208 * disassemble.c: Remove disasm_symaddr() function.
210 * arm-dis.c: Use info->symbol instead of info->flags to determine
211 if disassmbly should be in Thumb or Arm mode.
213 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
215 * arm-dis.c: Add support for disassembling Thumb opcodes.
216 (print_insn_thumb): New function.
218 * disassemble.c (disasm_symaddr): New function.
220 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
221 (thumb_opcodes): Table of Thumb opcodes.
223 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
225 * m68k-opc.c (btst): Change Dd@s to Dd;b.
227 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
228 and 'v' as operand types.
230 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
232 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
233 <olivier.carmona@di.epfl.ch>.
234 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
235 which has a two word opcode with a one word argument.
238 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
240 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
241 unsigned, not signed.
242 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
246 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
248 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
249 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
250 (ftrv): Slay the cut-and-paste monster.
253 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
255 * d10v-dis.c (print_operand):
256 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
258 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
260 * d10v-opc.c (OPERAND_FLAG): Split into:
261 (OPERAND_FFLAG, OPERAND_CFLAG) .
265 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
267 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
268 field for all INSN_MACRO's.
271 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
273 * mips-opc.c (sync,cache): These are 3900 insns.
275 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
277 sh-opc.h (sh_table): Remove ftst/nan.
279 start-sanitize-vr5400
280 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
282 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
283 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
285 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
289 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
291 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
292 Add tx49 insns and configury.
295 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
297 * mips-opc.c (ffc, ffs): Fix mask.
300 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
302 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
306 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
308 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
309 start-sanitize-vr5400
310 Added VR5400 instructions.
311 (N5): New cpu-id macro.
313 (WR_HILO, RD_HILO, MOD_HILO): New macros.
315 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
317 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
318 (WR_HILO, RD_HILO, MOD_HILO): New macros.
320 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
322 * v850-dis.c (disassemble): Replace // with /* ... */
324 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
326 * sparc-opc.c: Add wr & rd for v9a asr's.
327 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
328 (v9a_asr_reg_names): New variable.
329 Patch from David Miller <davem@vger.rutgers.edu>.
331 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
333 * sparc-opc.c (v9notv9a): New insn type.
334 (IMPDEP): Move to the end to not conflict with edge8 et al.
335 Patch from David Miller <davem@vger.rutgers.edu>.
337 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
339 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
341 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
343 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
345 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
347 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
348 of disassemble_info structure to determine if an overlay address
349 has a matching symbol in low memory.
351 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
352 new symbol_at_address_func field in disassemble_info structure.
354 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
356 * v850-opc.c (extract_d22): Use signed arithmatic.
358 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
360 * mips-opc.c: Three op mult is not an ISA insn.
362 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
364 * mips-opc.c: Fix formatting.
366 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
368 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
369 than assuming that char is signed. Explicitly sign extend 16 bit
370 values, rather than assuming that short is 16 bits.
371 (OP_sI, OP_J, OP_DIR): Likewise.
374 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
376 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
380 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
382 * v850-opc.c: Fix typo in comment.
384 * v850-dis.c (disassemble): Add test of processor type when
387 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
389 * configure.in: Use a diversion to set enable_shared before the
390 arguments are parsed.
391 * configure: Rebuild.
393 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
395 * m68k-opc.c (TBL1): Use ! rather than `.
396 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
398 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
400 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
402 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
404 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
407 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
408 * aclocal.m4: Rebuild with new libtool.
409 * configure: Rebuild.
412 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
414 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
417 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
419 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
421 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
423 * v850-opc.c (v850_opcodes): Further rearrangements.
426 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
428 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
431 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
433 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
436 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
438 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
440 * mips16-opc.c: Added mips16 sdbbp.
443 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
445 * v850-opc.c: Initialise processors field of v850_opcode structure.
448 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
450 Merge changes from Martin Hunt:
452 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
454 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
455 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
456 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
458 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
460 * d30v-dis.c (print_insn): First operand of d*i (delayed
461 branch) instructions is relative.
463 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
464 (d30v_operand_table): Add IMM6S3 type.
465 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
467 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
468 and cmp instructions.
470 * d30v-opc.c: Correct entries for repeat*, and sat*.
471 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
472 types. Correct several formats.
474 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
476 * d30v-opc.c (pre_defined_registers): Change control registers.
478 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
479 SHORT_C2. Manual was incorrect.
481 * d30v-dis.c (lookup_opcode): Return value now indicates
482 if an opcode has a short and a long form. Used for deciding
483 to append a ".s" or ".l".
484 (print_insn): Append a ".s" to an instruction if it is
485 the short form and ".l" if it is a long form. Do not append
486 anything if the instruction has only one possible size.
488 * d30v-opc.c: Change mulx2h to require an even register.
489 New form: SHORT_A2; a SHORT_A form that needs an even
490 register as the first operand.
492 * d30v-dis.c (print_insn_d30v): Fix problem where the last
493 instruction was not being disassembled if there were an odd
494 number of instructions.
496 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
500 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
502 * v850-dis.c (disassemble): Improved display of register lists.
505 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
507 * sparc-opc.c (sparc_opcodes): Fix assembler args to
508 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
509 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
510 fandnot1s, fandnot2s.
512 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
514 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
516 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
518 * cgen-asm.c (cgen_parse_address): New argument resultp.
520 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
522 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
524 * mn10200-dis.c (disassemble): PC relative instructions are
525 relative to the next instruction, not the current instruction.
527 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
529 * v850-dis.c (disassemble): Only signed extend values that are not
530 returned by extract functions.
531 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
533 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
535 * v850-opc.c: Update comments. Remove use of
536 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
538 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
540 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
542 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
544 * configure: Rebuilt with latest devo autoconf for NT support.
546 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
548 * v850-dis.c (disassemble): Use curly brace syntax for register
551 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
552 where r0 is being used as a destination register.
555 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
557 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
561 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
563 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
564 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
565 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
566 Add insns to access SGR and DBR.
567 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
570 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
572 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
575 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
577 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
578 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
581 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
583 * configure (cgen_files): Add support for v850e target.
584 * configure.in (cgen_files): Add support for v850e target.
586 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
588 * configure (cgen_files): Add support for v850ea target.
589 * configure.in (cgen_files): Add support for v850ea target.
592 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
594 * configure.in (bfd_arc_arch): Add.
595 * configure: Rebuild.
596 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
597 * Makefile.in: Rebuild.
598 * arc-dis.c, arc-opc.c: New files.
599 * disassemble.c (ARCH_all): Define ARCH_arc.
600 (disassembler): Add ARC support.
602 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
605 * v850-dis.c (disassemble): Add support for v850EA instructions.
607 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
608 (v850_opcodes): Add v850EA instructions.
610 * v850-dis.c (disassemble): Add support for v850E instructions.
612 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
613 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
614 insert_spe, extract_spe): New Functions.
615 (v850_opcodes): Add v850E instructions.
618 * v850-opc.c: Reorganised and re-layed out to improve readability
621 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
623 * configure: Rebuild with autoconf 2.12.1.
625 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
627 * aclocal.m4, configure: Rebuild with new automake patches.
629 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
631 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
632 * acinclude.m4: Just include acinclude.m4 from BFD.
633 * aclocal.m4, configure: Rebuild.
635 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
637 * Makefile.am: New file, based on old Makefile.in.
638 * acconfig.h: New file.
639 * acinclude.m4: New file.
640 * stamp-h.in: New file.
641 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
642 Removed shared library handling; now handled by libtool. Replace
643 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
644 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
645 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
646 handling in AC_OUTPUT.
647 * dep-in.sed: Change .o to .lo.
648 * Makefile.in: Now built with automake.
649 * aclocal.m4: Now built with aclocal.
650 * config.in, configure: Rebuild.
652 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
654 * mips-opc.c: Fix typo/thinko in "eret" instruction.
657 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
659 * mips-opc.c: Fix coding of mtsa.
662 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
664 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
666 * sparc-dis.c (sorted_opcodes): New static local.
667 (struct opcode_hash): `opcode' is pointer to const element.
668 (build_hash): First arg is now table of sorted pointers.
669 (print_insn_sparc): Sort opcodes by sorting table of pointers.
670 (compare_opcodes): Update.
672 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
674 * cgen-opc.c: #include <ctype.h>.
675 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
676 Handle case insensitive hashing.
677 (hash_keyword_value): Change type of `value' to unsigned int.
679 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
681 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
682 precision FP, mark it as such. Likewise for double precision
683 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
686 (mips_builtin_opcodes): Remove non-existant r5900 instructions
690 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
692 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
693 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
696 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
698 * ppc-opc.c (extract_nsi): make unsigned expression signed before
700 (UNUSED): remove one level of parens, so MSVC doesn't choke on
701 nesting depth when all the macros are expanded.
703 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
705 * sparc-opc.c: The fcmp v9a instructions take an integer register
706 as a destination, not a floating point register. From Christian
707 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
709 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
711 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
712 syntax. From Roman Hodek
713 <rnhodek@faui22c.informatik.uni-erlangen.de>.
715 * i386-dis.c (twobyte_has_modrm): Fix pand.
717 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
719 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
721 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
723 * arm-dis.c: Add prototypes for arm_decode_shift and
726 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
728 * mips-opc.c: Add r3900 insns.
730 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
732 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
733 print delay slot instructions on the same line. When using a PC
734 relative load, add a comment with the value being loaded if it can
737 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
739 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
740 to pushS/popS for segment regs and byte constant so that
741 pushw/popw printed when in 16 bit data mode.
743 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
744 print cbtw, cwtd in 16 bit data mode.
745 * i386-dis.c (putop): extra case W to support above.
747 * i386-dis.c (print_insn_x86): print addr32 prefix when given
748 address size prefix in 16 bit address mode.
750 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
752 * sh-dis.c: Reindent. Rename local variable fprintf to
755 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
757 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
759 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
761 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
763 * mips16-opc.c (mip16_opcodes): same.
765 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
767 * m68k-opc.c (moveb): Change $d to %d.
769 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
771 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
772 (twobyte_has_modrm): Likewise.
774 (OP_MMX, OP_EM, OP_MS): New static functions.
776 * i386-dis.c: Revert patch of April 4. The output now matches
779 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
781 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
784 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
786 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
788 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
790 * Makefile.in (install): Depend upon installdirs.
791 (installdirs): New target.
793 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
795 From Thomas Graichen <graichen@rzpd.de>:
796 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
797 * configure: Rebuild.
799 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
801 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
802 Delete string{,s}.h support.
804 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
806 * cgen-asm.c (cgen_parse_operand_fn): New global.
807 (cgen_parse_{{,un}signed_integer,address}): Update call to
808 cgen_parse_operand_fn.
809 (cgen_init_parse_operand): New function.
810 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
811 from cgen_asm_init_parse.
812 (m32r_cgen_assemble_insn): New operand `errmsg'.
813 Delete call to as_bad, return error message to caller.
814 (m32r_cgen_asm_hash_keywords): #if 0 out.
816 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
818 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
820 [case 'J']: Fix typo in register name.
822 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
824 * configure.in: Substitute SHLIB_LIBS.
825 * configure: Rebuild.
826 * Makefile.in (SHLIB_LIBS): New variable.
827 ($(SHLIB)): Use $(SHLIB_LIBS).
829 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
831 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
833 * cgen-opc.c (hash_keyword_name): Improve algorithm.
835 * disassemble.c (disassembler): Handle m32r.
837 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
839 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
840 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
841 * Makefile.in (CFILES): Add them.
842 (ALL_MACHINES): Add them.
843 (dependencies): Regenerate.
844 * configure.in (cgen_files): New variable.
845 (bfd_m32r_arch): Add entry.
846 * configure: Regenerate.
848 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
850 * configure.in: Correct file names for bfd_mn10[23]00_arch.
851 * configure: Rebuild.
853 * Makefile.in: Rebuild dependencies.
855 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
857 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
860 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
862 * Branched binutils 2.8.
864 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
866 * m10200-dis.c: Rename from mn10200-dis.c.
867 * m10200-opc.c: Rename from mn10200-opc.c.
868 * m10300-dis.c: Rename from mn10300-dis.c
869 * m10300-opc.c: Rename from mn10300-opc.c.
870 * Makefile.in: Update accordingly.
872 * mips16-opc.c: Add mul and dmul macros.
874 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
876 * makefile.vms: Update CFLAGS, add clean target.
878 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
880 * mips-opc.c: Add "wait". From Ralf Baechle
881 <ralf@gnu.ai.mit.edu>.
883 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
884 * configure, config.in: Rebuild.
885 * sysdep.h: Include <stdlib.h> if it exists.
886 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
888 * Makefile.in: Rebuild dependencies.
890 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
892 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
893 Andrew Bray <andy@madhouse.demon.co.uk>.
895 * mips-opc.c: Add cast when setting mips_opcodes.
897 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
899 * v850-dis.c (disassemble): Fix sign extension problem.
900 * v850-opc.c (extract_d*): Fix sign extension problems to make
901 disassembly calculate branch offsets correctly.
903 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
905 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
907 * mips-opc.c: Add dctr and dctw.
910 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
912 * d30v-dis.c (print_insn): Change the way signed constants
915 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
917 * Makefile.in (BFD_H): New variable.
918 (HFILES): New variable.
919 (CFILES): Add all C files.
920 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
921 Delete old dependencies, and build new ones.
922 * dep-in.sed: New file.
924 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
926 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
928 start-sanitize-coldfire
929 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
931 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
934 end-sanitize-coldfire
935 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
937 * mn10200-opc.c: Change "trap" to "syscall".
938 * mn10300-opc.c: Add new "syscall" instruction.
940 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
942 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
943 mulul insns on the coldfire.
945 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
947 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
948 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
949 (print_insn_little_arm): Likewise.
951 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
953 Based on patches from H.J. Lu <hjl@lucon.org>:
954 * i386-dis.c (fetch_data): Add prototype.
955 * m68k-dis.c (fetch_data): Add prototype.
956 (dummy_print_address): Add prototype. Make static.
957 * ppc-opc.c (valid_bo): Add prototype.
958 * sparc-dis.c (build_hash_table): Add prototype.
959 (is_delayed_branch, compute_arch_mask): Add prototypes.
960 (print_insn_sparc): Make several local variables const.
961 (compare_opcodes): Change arguments to const PTR. Add prototype.
962 * sparc-opc.c (arg): Change name field to be const.
963 (lookup_name, lookup_value): Add prototypes. Change table and
964 name parameters to be const.
965 (sparc_encode_asi): Change name parameter to be const.
966 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
967 (sparc_encode_sparclet_cpreg): Likewise.
968 (sparc_decode_asi): Change return type to be const.
969 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
970 (sparc_decode_sparclet_cpreg): Likewise.
972 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
974 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
975 Solaris doesn't like the combined options, and the -f is
977 (stamp-tshlink, install): Likewise.
979 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
981 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
984 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
986 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
988 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
990 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
993 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
995 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
998 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
1000 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
1002 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
1004 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
1007 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1009 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
1010 floatformat_to_double to make portable.
1011 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
1014 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
1016 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
1017 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
1019 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1021 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
1022 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
1024 start-sanitize-tic80
1025 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
1027 * tic80-opc.c (LSI_SCALED): Renamed from this ...
1028 (OFF_SL_BR_SCALED): ... to this, and added the flag
1029 TIC80_OPERAND_BASEREL to the flags word.
1030 (tic80_opcodes): Replace all occurances of LSI_SCALED with
1034 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
1036 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
1037 Change mips_opcodes from const array to a pointer,
1038 and change bfd_mips_num_opcodes from const int to int,
1039 so that we can increase the size of the mips opcodes table
1042 start-sanitize-tic80
1043 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
1045 * tic80-opc.c (tic80_predefined_symbols): Revert change to
1046 store BITNUM values in the table in one's complement form
1047 to match behavior when assembler is given a raw numeric
1048 value for a BITNUM operand.
1049 * tic80-dis.c (print_operand_bitnum): Ditto.
1053 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1055 * d30v-opc.c: Removed references to FLAG_X.
1058 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
1060 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
1063 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1065 * Makefile.in: Added d30v object files.
1066 * configure: (bfd_d30v_arch) Rebuilt.
1067 * configure.in: (bfd_d30v_arch) Added new case.
1068 * d30v-dis.c: New file.
1069 * d30v-opc.c: New file.
1070 * disassemble.c (disassembler) Add entry for d30v.
1073 start-sanitize-tic80
1074 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
1076 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
1077 representations for the floating point BITNUM values.
1079 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
1081 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
1082 in the table in one's complement form, as they appear in the
1084 (tic80_symbol_to_value): Use macros to access predefined
1086 (tic80_value_to_symbol): Ditto.
1087 (tic80_next_predefined_symbol): New function.
1088 * tic80-dis.c (print_operand_bitnum): Remove code that did
1089 one's complement for BITNUM values.
1092 start-sanitize-r5900
1093 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
1095 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
1098 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
1100 * makefile.vms: Remove 8 bit characters. Update to latest
1103 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1105 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
1107 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
1109 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
1110 (IMM24_PCREL): Likewise.
1112 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
1114 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
1115 address for an extended PC relative instruction that is not a
1118 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1120 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
1123 start-sanitize-tic80
1124 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
1126 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
1127 (tic80_opcodes): Sort entries so that long immediate forms
1128 come after short immediate forms, making it easier for
1129 assembler to select the right one for a given operand.
1132 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
1134 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
1136 (print_insn_mips16): Likewise.
1138 start-sanitize-r5900
1139 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
1141 * mips-opc.c: add r5900.
1144 start-sanitize-tic80
1145 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
1147 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
1148 a symbol class that restricts translation to just that
1149 class (general register, condition code, etc).
1151 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
1153 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
1154 and REG_DEST_E for register operands that have to be
1155 an even numbered register. Add REG_FPA for operands that
1156 are one of the floating point accumulator registers.
1157 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
1158 (tic80_opcodes): Change entries that need even numbered
1159 register operands to use the new operand table entries.
1160 Add "or" entries that are identical to "or.tt" entries.
1163 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
1165 * mips16-opc.c: Add new cases of exit instruction for
1167 * mips-dis.c (print_mips16_insn_arg): Display floating point
1168 registers in operands of exit instruction. Print `$' before
1169 register names in operands of entry and exit instructions.
1171 start-sanitize-tic80
1172 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
1174 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
1175 pairs for all predefined symbols recognized by the assembler.
1176 Also used by the disassembling routines.
1177 (tic80_symbol_to_value): New function.
1178 (tic80_value_to_symbol): New function.
1179 * tic80-dis.c (print_operand_control_register,
1180 print_operand_condition_code, print_operand_bitnum):
1181 Remove private tables and use tic80_value_to_symbol function.
1184 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1186 * d10v-dis.c (print_operand): Change address printing
1187 to correctly handle PC wrapping. Fixes PR11490.
1189 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
1191 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
1194 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
1196 * mips-dis.c (print_insn_mips16): Set insn_info information.
1197 (print_mips16_insn_arg): Likewise.
1199 * mips-dis.c (print_insn_mips16): Better handling of an extend
1200 opcode followed by an instruction which can not be extended.
1202 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
1204 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
1205 coldfire moveb instruction to not allow an address register as
1206 destination. Although the documentation does not indicate that
1207 this is invalid, experiments uncovered unexpected behavior.
1208 Added a comment explaining the situation. Thanks to Andreas
1209 Schwab for pointing this out to me.
1211 start-sanitize-tic80
1212 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
1214 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
1215 entries are presorted so that entries with the same mnemonic are
1216 adjacent to each other in the table. Sort the entries for each
1217 instruction so that this is true.
1220 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1222 * m68k-dis.c: Include <libiberty.h>.
1223 (print_insn_m68k): Sort the opcode table on the most significant
1224 nibble of the opcode.
1226 start-sanitize-tic80
1227 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
1229 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
1230 "vsub", "vst", "xnor", and "xor" instructions.
1231 (V_a1): Renamed from V_a, msb of accumulator reg number.
1232 (V_a0): Add macro, lsb of accumulator reg number.
1234 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
1236 * tic80-dis.c (print_insn_tic80): Broke excessively long
1237 function up into several smaller ones and arranged for
1238 the instruction printing function to be callable recursively
1239 to print vector instructions that have both a load and a
1240 math instruction packed into a single opcode.
1241 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
1242 to explain why it comes after the other vector opcodes.
1245 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
1247 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
1248 move insns to handle immediate operands.
1250 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1252 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
1253 fix operand mask in the "moveml" entries for the coldfire.
1255 start-sanitize-tic80
1256 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
1258 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
1259 New macros for building vector instruction opcodes.
1260 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
1261 FMT_LI, which were unused. The field is now a flags field.
1262 Remove some opcodes that are possible, but illegal, such
1263 as long immediate instructions with doubles for immediate
1264 values. Add "vadd" and "vld" instructions.
1266 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
1268 * tic80-opc.c (tic80_operands): Reorder some table entries to make
1269 the order more logical. Move the shift alias instructions ("rotl",
1270 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
1271 interspersed with the regular sr.x and sl.x instructions. Add
1272 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
1273 "sub", "subu", "swcr", and "trap".
1275 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
1277 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
1278 (OFF_SL_PC): Renamed from OFF_SL.
1279 (OFF_SS_BR): New operand type for base relative operand.
1280 (OFF_SL_BR): New operand type for base relative operand.
1281 (REG_BASE): New operand type for base register operand.
1282 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
1283 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
1284 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
1286 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
1287 10 char field, padded with spaces on rhs, rather than a string
1288 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
1289 than old TIC80_OPERAND_RELATIVE. Add support for new
1290 TIC80_OPERAND_BASEREL flag bit.
1292 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
1294 * tic80-dis.c (print_insn_tic80): Print floating point operands
1296 * tic80-opc.c (SPFI): Add single precision floating point
1297 immediate operand type.
1298 (ROTATE): Add rotate operand type for shifts.
1299 (ENDMASK): Add for shifts.
1300 (n): Macro for the 'n' bit.
1301 (i): Macro for the 'i' bit.
1302 (PD): Macro for the 'PD' field.
1303 (P2): Macro for the 'P2' field.
1304 (P1): Macro for the 'P1' field.
1305 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
1309 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
1311 * mn10200-dis.c (disassemble): Mask off unwanted bits after
1312 adding in current address for pc-relative operands.
1314 start-sanitize-tic80
1315 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
1317 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
1318 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
1319 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
1320 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
1321 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
1322 REG_BASE_M_SI, REG_BASE_M_LI respectively.
1323 (REG_SCALED, LSI_SCALED): New operand types.
1324 (E): New macro for 'E' bit at bit 27.
1325 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
1326 opcodes, including the various size flavors (b,h,w,d) for
1327 the direct load and store instructions.
1329 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
1331 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
1333 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
1334 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
1335 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
1336 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
1337 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
1338 masks with "MASK_* & ~M_*" to get the M bit reset.
1339 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
1341 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
1343 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
1344 correctly. Add support for printing TIC80_OPERAND_BITNUM and
1345 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
1347 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
1348 CC, SICR, and LICR table entries.
1349 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
1350 "bcnd", and "brcr" opcodes.
1353 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
1355 * ppc-opc.c (powerpc_operands): Make comment match the
1356 actual fields (no shift field).
1357 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
1358 start-sanitize-tic80
1359 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
1360 partial implementation, work in progress.
1361 * tic80-opc.c (tic80_operands): Begin construction operands table.
1362 (tic80_opcodes): Continue populating opcodes table and start
1363 filling in the operand indices.
1364 (tic80_num_opcodes): Add this.
1367 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
1369 * m68k-opc.c: Add #B case for moveq.
1371 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
1373 * mn10300-dis.c (disassemble): Make sure all variables are initialized
1374 before they are used.
1376 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
1378 * v850-opc.c (v850_opcodes): Put curly-braces around operands
1379 for "breakpoint" instruction.
1381 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
1383 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
1384 (dep): Use ALL_CFLAGS rather than CFLAGS.
1386 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1388 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
1391 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
1393 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
1394 start-sanitize-tic80
1395 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
1398 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
1400 * mips16-opc.c: Add "abs".
1402 start-sanitize-tic80
1403 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
1405 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
1406 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
1407 (disassembler): Add bfd_arch_tic80 support to set disassemble
1408 to print_insn_tic80.
1409 * tic80-dis.c (print_insn_tic80): Add stub.
1411 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
1413 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
1414 * configure: Regenerate with autoconf.
1415 * tic80-dis.c: Add file.
1416 * tic80-opc.c: Add file.
1419 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1421 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
1423 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
1425 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
1426 (mn10200_opcodes): Use it for some logicals and btst insns.
1427 Add "break" and "trap" instructions.
1429 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
1431 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
1433 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
1435 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
1436 relative load or add now depends upon whether the instruction is
1439 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
1441 * mn10200-dis.c: Finish writing disassembler.
1442 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
1443 Fix mask for "jmp (an)".
1445 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
1446 handle endianness issues for mn10300.
1448 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
1450 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
1452 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
1453 instruction. Fix opcode field for "movb (imm24),dn".
1455 * mn10200-opc.c (mn10200_operands): Fix insertion position
1458 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
1460 * mn10200-opc.c: Create mn10200 opcode table.
1461 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
1462 but moving along nicely.
1464 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1466 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
1468 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
1470 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
1471 specifiers for fmovem* instructions.
1473 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1475 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
1477 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
1479 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
1482 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1484 * mn10300-opc.c: Add some comments explaining the various
1487 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
1489 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1491 * m68k-dis.c (print_insn_arg): Handle new < and > operand
1494 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1495 operand specifiers in fmovm* instructions.
1497 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
1499 * ppc-opc.c (insert_li): Give an error if the offset has the two
1500 least significant bits set.
1502 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
1504 * mips-dis.c (print_insn_mips16): Separate the instruction from
1505 the arguments with a tab, not a space.
1507 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
1509 * mn10300-dis.c (disasemble): Finish conversion to '$' as
1512 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1515 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
1517 * configure: Rebuild with autoconf 2.12.
1519 Add support for mips16 (16 bit MIPS implementation):
1520 * mips16-opc.c: New file.
1521 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1522 (mips16_reg_names): New static array.
1523 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1524 after seeing a 16 bit symbol.
1525 (print_insn_little_mips): Likewise.
1526 (print_insn_mips16): New static function.
1527 (print_mips16_insn_arg): New static function.
1528 * mips-opc.c: Add jalx instruction.
1529 * Makefile.in (mips16-opc.o): New target.
1530 * configure.in: Use mips16-opc.o for bfd_mips_arch.
1531 * configure: Rebuild.
1533 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
1535 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1536 operand specifiers in *save, *restore and movem* instructions.
1538 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1541 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1542 register operands for immediate arithmetic, not, neg, negx, and
1543 set according to condition instructions.
1545 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1546 specifier of the effective-address operand in immediate forms of
1547 arithmetic instructions. The specifier for the immediate operand
1548 notes how and where the constant will be stored.
1550 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
1552 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1555 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1558 * mn10300-dis.c (disassemble): Prefix registers with '%'.
1560 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
1562 * mn10300-dis.c (disassemble): Handle register lists.
1564 * mn10300-opc.c: Fix handling of register list operand for
1565 "call", "ret", and "rets" instructions.
1567 * mn10300-dis.c (disassemble): Print PC-relative and memory
1568 addresses symbolically if possible.
1569 * mn10300-opc.c: Distinguish between absolute memory addresses,
1570 pc-relative offsets & random immediates.
1572 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1574 (disassemble): Handle SPLIT and EXTENDED operands.
1576 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
1578 * mn10300-dis.c: Rough cut at printing some operands.
1580 * mn10300-dis.c: Start working on disassembler support.
1581 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1583 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1585 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1587 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1589 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1591 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
1593 * mn10300-opc.c (mn10300_opcodes): Demand parens around
1594 register argument is calls and jmp instructions.
1596 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
1598 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1599 getx operand. Fix opcode for mulqu imm,dn.
1601 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
1603 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1604 in MN10300_OPERAND_SPLIT operands for how many bits
1605 appear in the basic insn word. Add IMM32_HIGH24,
1606 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1607 (mn10300_opcodes): Use new operands as needed.
1609 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1610 for bset, bclr, btst instructions.
1611 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1613 * mn10300-opc.c (mn10300_operands): Remove many redundant
1614 operands. Update opcode table as appropriate.
1615 (IMM32): Add MN10300_OPERAND_SPLIT flag.
1616 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1618 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
1620 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1621 operands (for indexed load/stores). Fix bitpos for DI
1622 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1623 few instructions that insert immediates/displacements in the
1624 middle of the instruction. Add IMM8E for 8 bit immediate in
1625 the extended part of an instruction.
1626 (mn10300_operands): Use new opcodes as appropriate.
1628 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1630 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1631 sequential so the assembler never parallelizes it with
1634 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
1636 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1637 a data/address register that appears in register field 0
1638 and register field 1.
1639 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1641 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
1643 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1644 standard disassembly.
1646 * alpha-opc.c (alpha_operands): Rearrange flags slot.
1647 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1648 Recategorize PALcode instructions.
1650 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
1652 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1654 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
1656 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1657 there are no operand types.
1659 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
1661 * v850-opc.c (D9_RELAX): Renamed from D9, all references
1663 (v850_operands): Make sure D22 immediately follows D9_RELAX.
1665 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
1667 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1669 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
1671 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1672 and sst.w instructions.
1674 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1677 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
1679 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1682 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
1684 * ppc-opc.c (PPCPWR2): Define.
1685 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1688 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
1690 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1691 field for movhu instruction.
1693 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1694 cast value to "long" not "signed long" to keep hpux10
1697 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
1699 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1702 * mn10300-opc.c (FMT*): Remove definitions.
1704 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1705 for shift-by-register opcodes.
1707 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1708 into [AD][MN][01] for encoding the position of the register
1711 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1713 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1714 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1716 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1718 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1719 Fix various typos. Add "PAREN" operand.
1720 (MEM, MEM2): Define.
1721 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1722 operands. Fix several typos.
1724 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1727 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1729 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1730 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1732 (mn10300_opcodes): Break opcode format out into its own field.
1733 Update many operand fields to deal with signed vs unsigned
1734 issues. Fix one or two typos in the "mov" instruction
1735 opcode, mask and/or operand fields.
1737 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1739 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1740 m68851 wasn't reset.
1742 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1744 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1745 all opcodes. Very rough cut at operands for all opcodes.
1747 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1750 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1752 * mn10200-opc.c, mn10300-opc.c: New files.
1753 * mn10200-dis.c, mn10300-dis.c: New files.
1754 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1755 * disassemble.c: Break mn10x00 support into 10200 and 10300
1757 * configure.in: Likewise.
1758 * configure: Rebuilt.
1760 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1762 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1764 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1766 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1768 * disassemble (ARCH_mn10x00): Define.
1769 (disassembler): Handle bfd_arch_mn10x00.
1770 * configure.in: Recognize bfd_mn10x00_arch.
1771 * configure: Rebuilt.
1773 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1775 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1776 accordingly. Don't declare functions using op_rtn.
1778 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1780 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1781 params to be more standard.
1782 * (disassemble): Print absolute addresses and symbolic names for
1783 branch and jump targets.
1784 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1786 * (v850_opcodes): Add breakpoint insn.
1788 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1790 * m68k-opc.c: Move the fmovemx data register cases before the
1791 other cases, so that they get recognized before the data register
1792 does gets treated as a degenerate register list.
1794 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1796 * mips-opc.c: Add a case for "div" and "divu" with two registers
1797 and a destination of $0.
1799 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1801 * mips-dis.c (print_insn_arg): Add prototype.
1802 (_print_insn_mips): Ditto.
1804 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1806 * mips-dis.c (print_insn_arg): Print condition code registers as
1809 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1811 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1813 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1815 * v850-dis.c (disassemble): Make static. Provide prototype.
1817 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1819 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1822 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1824 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1825 ']' characters into the output stream.
1826 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1827 Add "memop" field to all opcodes (for the disassembler).
1828 Reorder opcodes so that "nop" comes before "mov" and "jr"
1829 comes before "jarl".
1831 * v850-dis.c (print_insn_v850): Fix typo in last change.
1833 * v850-dis.c (print_insn_v850): Properly handle disassembling
1834 a two byte insn at the end of a memory region when the memory
1835 region's size is only two byte aligned.
1837 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1839 * v850-dis.c (v850_reg_names): Define.
1840 (v850_sreg_names, v850_cc_names): Likewise.
1841 (disassemble): Very rough cut at printing operands (unformatted).
1843 * v850-opc.c (BOP_MASK): Fix.
1844 (v850_opcodes): Fix mask for jarl and jr.
1846 * v850-dis.c: New file. Skeleton for disassembler support.
1847 * Makefile.in Remove v850 references, they're not needed here.
1848 * configure.in: Add v850-dis.o when building v850 toolchains.
1849 * configure: Rebuilt.
1850 * disassemble.c (disassembler): Call v850 disassembler.
1852 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1853 (insert_d8_6, extract_d8_6): New functions.
1854 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1855 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1857 (IF4A, IF4B): Use "D7" instead of "D7S".
1858 (IF4C, IF4D): Use "D8_7" instead of "D8".
1859 (IF4E, IF4F): New. Use "D8_6".
1860 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1861 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1863 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1864 (v850_operands): Change D16 to D16_15, use special insert/extract
1865 routines. New new D16 that uses the generic insert/extract code.
1866 (IF7A, IF7B): Use D16_15.
1867 (IF7C, IF7D): New. Use D16.
1868 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1870 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1871 message. Issue an error if the branch offset is odd.
1873 * v850-opc.c: Add notes about needing special insert/extract
1874 for all the load/store insns, except "ld.b" and "st.b".
1876 * v850-opc.c (insert_d22, extract_d22): New functions.
1877 (v850_operands): Use insert_d22 and extract_d22 for
1879 (insert_d9): Fix range check.
1881 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1883 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1884 and set bits field to D9 and D22 operands.
1886 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1888 * v850-opc.c (v850_operands): Define SR2 operand.
1889 (v850_opcodes): "ldsr" uses R1,SR2.
1891 * v850-opc.c (v850_opcodes): Fix opcode specs for
1892 sld.w, sst.b, sst.h, sst.w, and nop.
1894 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1896 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1897 end of the opcode table.
1899 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1901 * d10v-opc.c (pre_defined_registers): Added register pairs,
1902 "r0-r1", "r2-r3", etc.
1904 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1906 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1907 Create I16U for an unsigned 16bit mmediate operand.
1908 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1910 * v850-opc.c (v850_operands): Define EP operand.
1911 (IF4A, IF4B, IF4C, IF4D): Use EP.
1913 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1914 with immediate operand, "movhi". Tweak "ldsr".
1916 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1917 correct. Get sld.[bhw] and sst.[bhw] closer.
1919 * v850-opc.c (v850_operands): "not" is a two byte insn
1921 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1923 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1925 * v850-opc.c (two): Get order of words correct.
1927 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1929 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1930 register source and destination operands.
1931 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1933 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1934 same thinko in "trap" opcode.
1936 * v850-opc.c (v850_opcodes): Add initializer for size field
1939 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1940 Add D8 for 8-bit unsigned field in short load/store insns.
1941 (IF4A, IF4D): These both need two registers.
1942 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1943 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1944 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1945 for "ldsr" and "stsr".
1946 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1949 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1950 short store word (sst.w).
1952 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1954 * v850-opc.c (v850_operands): Added insert and extract fields,
1955 pointers to functions that handle unusual operand encodings.
1957 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1959 * v850-opc.c (v850_opcodes): Enable "trap".
1961 * v850-opc.c (v850_opcodes): Fix order of displacement
1962 and register for "set1", "clr1", "not1", and "tst1".
1964 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1966 * v850-opc.c (v850_operands): Add "B3" support.
1967 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1970 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1972 * v850-opc.c: Close unterminated comment.
1974 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1976 * v850-opc.c (v850_operands): Add flags field.
1977 (v850_opcodes): add move opcodes.
1979 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1981 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1982 * configure: (bfd_v850v_arch) Add new case.
1983 * configure.in: (bfd_v850_arch) Add new case.
1984 * v850-opc.c: New file.
1986 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1988 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1990 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1992 * d10v-opc.c: Add additional information to the opcode
1993 table to help determinine which instructions can be done
1996 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1998 * mpw-make.sed: Update editing of include pathnames to be
2001 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
2003 * arm-opc.h: Added "bx" instruction definition.
2005 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
2007 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
2009 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2011 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
2013 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2015 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
2017 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
2019 * makefile.vms: Update for alpha-opc changes.
2021 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
2023 * i386-dis.c (print_insn_i386): Actually return the correct value.
2024 (ONE, OP_ONE): #ifdef out; not used.
2026 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2028 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
2029 Changed subi operand type to treat 0 as 16.
2031 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
2033 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
2036 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
2038 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
2039 memory transfer instructions. Add new format string entries %h and %s.
2040 * arm-dis.c: (print_insn_arm): Provide decoding of the new
2043 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2045 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
2046 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
2048 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
2050 * alpha-dis.c (print_insn_alpha_osf): Remove.
2051 (print_insn_alpha_vms): Remove.
2052 (print_insn_alpha): Make globally visible. Chose the register
2053 names based on info->flavour.
2054 * disassemble.c: Always return print_insn_alpha for the alpha.
2056 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2058 * d10v-dis.c (dis_long): Handle unknown opcodes.
2060 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2062 * d10v-opc.c: Changes to support signed and unsigned numbers.
2063 All instructions with the same name that have long and short forms
2064 now end in ".l" or ".s". Divs added.
2065 * d10v-dis.c: Changes to support signed and unsigned numbers.
2067 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2069 * d10v-dis.c: Change all functions to use info->print_address_func.
2071 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2073 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
2074 move ccr/sr insns more strict so that the disassembler only
2075 selects them when the addressing mode is data register.
2077 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2078 * d10v-opc.c (pre_defined_registers): Declare.
2079 * d10v-dis.c (print_operand): Now uses pre_defined_registers
2080 to pick a better name for the registers.
2082 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
2084 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
2085 operands for fexpand and fpmerge. From Christian Kuehnke
2086 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
2088 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
2090 * alpha-dis.c (print_insn_alpha): No longer the user-visible
2091 print routine. Take new regnames and cpumask arguments.
2092 Kill the environment variable nonsense.
2093 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
2094 (print_insn_alpha_vms): New function. Do VMS style regnames.
2095 * disassemble.c (disassembler): Test bfd flavour to pick
2096 between OSF and VMS routines. Default to OSF.
2098 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
2100 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
2101 * configure: Rebuild.
2102 * Makefile.in (install): Use @INSTALL_SHLIB@.
2104 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2106 * configure: (bfd_d10v_arch) Add new case.
2107 * configure.in: (bfd_d10v_arch) Add new case.
2108 * d10v-dis.c: New file.
2109 * d10v-opc.c: New file.
2110 * disassemble.c (disassembler) Add entry for d10v.
2112 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2114 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
2115 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
2117 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
2119 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
2120 distinguish between variants of the instruction set.
2121 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
2122 distinguish between variants of the instruction set.
2124 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
2126 * i386-dis.c (print_insn_i8086): New routine to disassemble using
2127 the 8086 instruction set.
2128 * i386-dis.c: General cleanups. Make most things static. Add
2129 prototypes. Get rid of static variables aflags and dflags. Pass
2130 them as args (to almost everything).
2132 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
2134 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
2136 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
2138 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
2139 if the next arg is marked with SRC_IN_DST. Gross.
2141 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
2142 we're looking for and find EXR.
2144 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
2145 if we're looking for KBIT and we don't find it.
2147 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
2150 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
2151 3bit immediate operands.
2153 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
2155 * Released binutils 2.7.
2157 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
2158 <kkaempf@progis.ac-net.de>.
2160 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
2162 * alpha-opc.c: Correct second case of "mov" to use OPRL.
2164 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
2166 * sparc-dis.c (print_insn_sparclite): New routine to print
2167 sparclite instructions.
2169 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2171 * m68k-opc.c (m68k_opcodes): Add coldfire support.
2173 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
2175 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
2176 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
2177 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
2179 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2181 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
2182 Use autoconf-set values.
2183 (docdir, oldincludedir): Removed.
2184 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
2186 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
2188 * alpha-opc.c: New file.
2189 * alpha-opc.h: Remove.
2190 * alpha-dis.c: Complete rewrite to use new opcode table.
2191 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
2192 * configure: Rebuild with autoconf 2.10.
2193 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
2194 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
2196 (alpha-opc.o): New target.
2198 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
2200 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
2201 Set imm_added_to_rs1 even if the source and destination register
2204 * sparc-opc.c: Add some two operand forms of the wr instruction.
2206 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
2208 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
2211 * disassemble.c (disassembler): Handle H8/S.
2212 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
2214 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
2216 * sparc-opc.c: Add beq/teq as aliases for be/te.
2218 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
2219 <sergei@msil.sps.mot.com>.
2221 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
2223 * makefile.vms: New file.
2225 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
2227 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
2229 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
2232 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
2234 * i386-dis.c (OP_OFF): Call append_prefix.
2236 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2238 * ppc-opc.c (instruction encoding macros): Add explicit casts to
2239 unsigned long to silence a warning from the Solaris PowerPC
2242 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
2244 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
2246 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
2248 * sparc-dis.c (X_IMM,X_SIMM): New macros.
2250 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
2251 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
2252 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
2253 cpush, cpusha, cpull sparclet insns.
2255 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
2257 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
2259 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
2261 * sparc-opc.c: Set F_FBR on floating point branch instructions.
2262 Set F_FLOAT on other floating point instructions.
2264 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2266 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
2268 (powerpc_opcodes): Add 860/821 specific SPRs.
2270 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
2272 * configure.in: Permit --enable-shared to specify a list of
2273 directories. Set and substitute BFD_PICLIST.
2274 * configure: Rebuild.
2275 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
2276 uses. Set to @BFD_PICLIST@.
2278 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
2280 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
2281 not "abs", which may be needed for the absolute in something
2282 like btst #0,@10:8. Print L_3 immediates separately from other
2283 immediates. Change ABSMOV reference to ABS8MEM.
2285 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
2287 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
2288 (current_arch_mask): New static global.
2289 (compute_arch_mask): New static function.
2290 (print_insn_sparc): Delete sparc_v9_p. New static local
2291 current_mach. Resort opcode table if current_mach changes.
2292 Generalize "insn not supported" test.
2293 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
2294 Delete test for v9/!v9.
2295 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
2297 (brfc): Split into CBR and FBR for coprocessor/fp branches.
2298 (brfcx): Renamed to FBRX.
2299 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
2300 coprocessor mnemonics are not supported on the sparclet).
2301 (condf): Renamed to CONDF.
2302 (SLCBCC2): Delete F_ALIAS flag.
2304 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
2306 * sparc-opc.c (sparc_opcodes): rd must be 0 for
2307 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
2309 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
2311 * Makefile.in (config.status): Depend upon BFD VERSION file, so
2312 that the shared library version number is set correctly.
2314 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
2316 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
2317 Miles Bader <miles@gnu.ai.mit.edu>.
2318 * configure: Rebuild.
2320 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
2322 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
2325 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
2327 * configure: Rebuild with autoconf 2.8.
2329 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
2331 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
2332 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
2334 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
2336 * configure.in: Don't set SHLIB or SHLINK to an empty string,
2337 since they appear as targets in Makefile.in.
2338 * configure: Rebuild.
2340 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
2342 * mpw-make.sed: Edit out shared library support bits.
2344 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
2346 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
2347 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
2348 (sparc_opcodes): Add sparclet insns.
2349 (sparclet_cpreg_table): New static local.
2350 (sparc_{encode,decode}_sparclet_cpreg): New functions.
2351 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
2353 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
2355 * i386-dis.c (index16): New static variable.
2356 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
2358 (OP_indirE): Return result of OP_E.
2359 (OP_E): Check for 16 bit addressing mode, and disassemble
2360 correctly. Optimised 32 bit case a little. Don't print
2361 "(base,index,scale)" when sib specifies only an offset.
2363 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
2365 * configure.in: Set and substitute SHLIB_DEP.
2366 * configure: Rebuild.
2367 * Makefile.in (SHLIB_DEP): New variable.
2368 (LIBIBERTY_LISTS, BFD_LIST): New variables.
2369 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
2370 COMMON_SHLIB, add them to piclist with appropriate modifications.
2371 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
2372 here: just use piclist.
2374 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
2376 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
2377 (print_insn_sparc): Rewrite v9/not-v9 tests.
2378 (compare_opcodes): Likewise.
2379 * sparc-opc.c (MASK_<ARCH>): Define.
2380 (v6,v7,v8,sparclite,v9,v9a): Redefine.
2381 (sparclet,v6notv9): Define.
2382 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
2383 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
2385 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
2387 * configure.in: Call AC_PROG_CC before configure.host.
2388 * configure: Rebuild.
2390 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
2392 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
2394 * i386-dis.c (onebyte_has_modrm): New static array.
2395 (twobyte_has_modrm): New static array.
2396 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
2398 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
2400 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
2403 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2405 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
2408 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
2410 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
2411 m68010up, not just m68020up | cpu32.
2413 * Makefile.in (SONAME): New variable.
2414 ($(SHLINK)): Make a link to the transformed name, as well.
2415 (stamp-tshlink): New target.
2416 (install): Skip stamp-tshlink during install.
2418 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
2420 * configure.in: Call AC_ARG_PROGRAM.
2421 * configure: Rebuild.
2422 * Makefile.in (program_transform_name): New variable.
2423 (install): Transform library name before installing it.
2425 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
2427 * i960-dis.c (mem): Add HX dcinva instruction.
2429 Support for building as a shared library, based on patches from
2430 Alan Modra <alan@spri.levels.unisa.edu.au>:
2431 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
2432 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
2433 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
2434 * configure: Rebuild.
2435 * Makefile.in (ALLLIBS): New variable.
2436 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
2437 (COMMON_SHLIB, SHLINK): New variables.
2438 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
2439 (STAGESTUFF): Remove variable.
2440 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
2441 (stamp-piclist, piclist): New targets.
2442 ($(SHLIB), $(SHLINK)): New targets.
2443 ($(OFILES)): Depend upon stamp-picdir.
2444 (disassemble.o): Build twice if PICFLAG is set.
2445 (MOSTLYCLEAN): Add pic/*.o.
2446 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
2447 (distclean): Remove pic and stamp-picdir.
2448 (install): Install shared libraries.
2449 (stamp-picdir): New target.
2451 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
2453 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
2454 Print unknown instruction as "unknown", rather than in hex.
2456 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
2458 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
2460 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
2462 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
2464 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
2466 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
2467 when necessary. From Ulrich Drepper
2468 <drepper@myware.rz.uni-karlsruhe.de>.
2470 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
2472 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
2473 sparc_num_opcodes. Update architecture enum values.
2474 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
2475 (sparc_opcode_lookup_arch): New function.
2476 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
2477 (sparc_opcodes): Add v9a shutdown insn.
2479 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
2481 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
2482 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
2484 (print_insn_sparc64): Deleted.
2485 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
2488 * sparc-opc.c (architecture_pname): Add v9a.
2490 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
2492 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
2493 incorrectly defined as 0x16 when it should be 0x15.
2494 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
2495 (alpha_insn_set): added cvtst and cvttq float ops. Also added
2496 excb (exception barrier) which is defined in the Alpha
2497 Architecture Handbook version 2.
2498 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2499 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
2500 disassembled as or, for example.
2502 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
2504 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2505 (_print_insn_mips): Change i from int to unsigned int.
2507 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
2509 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2510 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
2512 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
2514 * i386-dis.c: Added Pentium Pro instructions.
2516 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2518 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2521 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2523 * sh-opc.h (sh_nibble_type): Added REG_B.
2524 (sh_arg_type): Added A_REG_B.
2525 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2527 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2529 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
2531 * disassemble.c (disassembler): Use new bfd_big_endian macro.
2533 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
2535 * Makefile.in (distclean): Remove stamp-h. From Ronald
2536 F. Guilmette <rfg@monkeys.com>.
2538 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
2540 From David Mosberger-Tang <davidm@azstarnet.com>:
2541 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2544 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2546 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2547 (sh_table): Added many SH3 opcodes.
2548 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2550 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2552 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2553 (subco,subco.): Mark this PPC, not PPCCOM.
2555 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
2557 * configure: Rebuild with autoconf 2.7.
2559 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
2561 * configure: Rebuild with autoconf 2.6.
2563 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
2565 * configure.in: Sort list of architectures. Accept but do nothing
2566 for alliant, convex, pyramid, romp, and tahoe.
2568 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
2570 * a29k-dis.c (print_special): Change num to unsigned int.
2572 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
2574 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2577 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
2579 * configure.in: Call AC_CHECK_PROG to find and cache AR.
2580 * configure: Rebuilt.
2582 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
2584 * configure.in: Add case for bfd_i860_arch.
2585 * configure: Rebuild.
2587 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
2589 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2590 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2591 (NEXTDOUBLE): Likewise.
2592 (print_insn_m68k): Don't match fmoveml if there is more than one
2593 register in the list.
2594 (print_insn_arg): Handle a place of '8' for a type of 'L'.
2596 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
2598 * m68k-opc.c: Use #W rather than #w.
2599 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2601 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
2603 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2604 and likewise for all the dbxx opcodes.
2606 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
2608 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2610 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
2612 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2613 the VR4100 specific instructions to the mips_opcodes structure.
2615 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
2617 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2618 ugly Metrowerks bug in CW6, is fixed in CW7.
2620 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2622 * ppc-opc.c (whole file): Add flags for common/any support.
2624 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
2626 * Makefile.in (BISON): Remove macro.
2627 (FLAGS_TO_PASS): Remove BISON.
2629 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
2631 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2633 * m68k-dis.c (print_insn_m68k): Recognize all two-word
2634 instructions that take no args by looking at the match mask.
2635 (print_insn_arg): Always print "%" before register names.
2636 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2637 [case '_']: Don't print "@#" before address.
2638 [case 'J']: Use "%s" as format string, not register name.
2639 [case 'B']: Treat place == 'C' like 'l' and 'L'.
2641 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
2643 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2646 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
2648 From David Mosberger-Tang <davidm@azstarnet.com>
2650 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2651 (alpha_insn_set): added definitions for VAX floating point
2652 instructions (Unix compilers don't generate these, but handcoded
2653 assembly might still use them).
2655 * alpha-dis.c (print_insn_alpha): added support for disassembling
2656 the miscellaneous instructions in the Alpha instruction set.
2658 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
2660 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2661 no longer create sysdep.h, sed ppc-opc.c to work around a
2662 serious Metrowerks C bug.
2663 * mpw-make.in: Remove.
2664 * mpw-make.sed: New file, used by mpw-configure to edit
2665 Makefile.in into an MPW makefile.
2667 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
2669 * Makefile.in (maintainer-clean): New synonym for realclean.
2671 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
2673 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2674 which use '0', '1', and '2' instead. Specify the proper size for
2675 a pmove immediate operand. Correct the pmovefd patterns to be
2676 moves to a register, not from a register.
2677 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2679 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
2681 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2682 %psr, %wim, %tbr as F_NOTV9.
2684 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
2686 * Makefile.in (Makefile): Just rebuild Makefile when running
2688 (config.h, stamp-h): New targets.
2689 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2690 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2691 rebuilding config.h.
2692 * configure: Rebuild.
2694 * mips-opc.c: Change unaligned loads and stores with "t,A"
2695 operands to use "t,A(b)".
2697 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2699 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2701 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2703 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2704 until 3 instead of until 2.
2706 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2708 * Makefile.in (ALL_CFLAGS): Define.
2709 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2710 (MOSTLYCLEAN): Add config.log.
2711 (distclean): Don't remove config.log.
2712 * configure.in: Substitute HDEFINES.
2713 * configure: Rebuild.
2715 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2717 * sh-opc.h (sh_arg_type): Add F_FR0.
2718 (sh_table, case fmac): Add F_FR0 as first argument.
2720 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2722 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2724 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2726 * sparc-dis.c: Remove all references to NO_V9.
2728 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2730 * aclocal.m4: Just include ../bfd/aclocal.m4.
2731 * configure: Rebuild.
2733 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2735 * sparc-dis.c (X_DISP19): Define.
2736 (print_insn, case 'G'): Use it.
2737 (print_insn, case 'L'): Sign extend displacement.
2739 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2741 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2742 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2743 host_makefile_frag or frags.
2744 * aclocal.m4: New file.
2745 * configure: Rebuild.
2746 * Makefile.in (INSTALL): Set to @INSTALL@.
2747 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2748 (INSTALL_DATA): Set to @INSTALL_DATA@.
2750 (AR_FLAGS): Set to rc rather than qc.
2751 (CC): Define as @CC@.
2752 (CFLAGS): Set to @CFLAGS@.
2753 (@host_makefile_frag@): Remove.
2754 (config.status): Remove dependency upon @frags@.
2756 * configure.in: ../bfd/config.bfd now just sets shell variables.
2757 Use them rather than looking through target Makefile fragments.
2758 * configure: Rebuild.
2760 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2762 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2764 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2766 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2767 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2770 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2771 (lookup_{name,value}): New functions.
2772 (prefetch_table): New static local.
2773 (sparc_{encode,decode}_prefetch): New functions.
2774 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2776 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2778 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2781 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2783 * sh-dis.c: Correct comment on first line of file.
2785 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2787 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2789 * sparc-opc.c (asi, membar): New static locals.
2790 (sparc_{encode,decode}_{asi,membar}): New functions.
2791 (sparc_opcodes, membar insn): Fix.
2792 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2793 Support decoding of membar masks.
2796 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2798 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2800 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2802 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2803 and likewise for the other branches. Add bhs as an alias for bcc,
2804 and likewise for the size variants. Add dbhs as an alias for
2807 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2809 * sh-opc.h (FP sts instructions): Update to match reality.
2811 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2813 * m68k-dis.c: (fpcr_names): Add % before all register names.
2814 (reg_names): Likewise.
2815 (print_insn_arg): Don't explicitly print % before register names.
2816 Add % before register names in static array names. In case 'r',
2817 print data registers as `@(Dn)', not `Dn@'. When printing a
2818 memory address, don't print @# before it.
2819 (print_indexed): Change base_disp and outer_disp from int to
2820 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2821 syntax. Sign extend 8 byte displacement correctly.
2822 (print_base): Print using MIT syntax. Print zpc when appropriate.
2823 Change parameter disp from int to bfd_vma.
2825 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2828 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2830 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2831 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2832 * sh-opc.h (sh_arg_type): Add new operand types.
2833 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2835 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2837 * Makefile.in (distclean): Remove generated file config.h.
2839 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2841 * Makefile.in (distclean): Remove generated file config.h.
2843 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2845 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2847 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2849 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2850 rather than numopcodes. Use m68k_opcodes rather than removed
2851 opcode function. Don't check F_ALIAS.
2852 (print_insn_arg): Change first parameter to be const char *.
2853 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2854 (m68k-opc.o): New target.
2855 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2856 * configure: Rebuild.
2858 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2860 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2861 (opcode_bits, opcode_hash_table): New variables.
2862 (opcodes_initialized): Renamed from opcodes_sorted.
2863 (build_hash_table): New function.
2864 (is_delayed_branch): Use hash table.
2865 (print_insn): Renamed from print_insn_sparc, made static.
2866 Build and use hash table. If !sparc64, ignore sparc64 insns,
2867 and vice-versa if sparc64.
2868 (print_insn_sparc, print_insn_sparc64): New functions.
2869 (compare_opcodes): Move sparc64 opcodes to end.
2870 Print commutative insns with constant second.
2871 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2873 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2875 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2876 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2877 avoids printing a delay slot in a delay slot.
2878 * sh-opc.h (sh_table): Fully bracket last entry.
2880 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2882 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2884 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2886 * configure.in: Get host_makefile_frag from ${srcdir}.
2888 * configure.in: Autoconfiscated. Check for string[s].h. Create
2889 config.h from config.in. Don't set up sysdep.h link.
2890 * sysdep.h: New file.
2891 * configure, config.in: New files, generated from configure.in.
2892 * Makefile.in: Updated to be processed autoconf-style.
2893 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2894 (Makefile): Depend on config.status.
2895 (config.status): New rule.
2896 * configure.bat: Update Makefile substitutions.
2898 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2900 * mips-opc.c (L1): Define.
2901 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2902 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2905 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2907 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2908 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2909 have multiple add units but only a single logical unit.
2911 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2912 shifted by 18, without any insertion or extraction function.
2913 (insert_cr, extract_cr): Remove.
2915 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2917 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2920 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2922 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2923 * sh-opc.h: Add copyright.
2925 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2927 * Makefile.in (crunch-m68k): Delete extra target accidentally
2928 checked in a while ago.
2930 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2932 * sh-opc.h (sh_table): Add SH3 support.
2934 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2936 * sh-opc.h: Added bsrf and braf.
2938 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2940 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2941 bogus [ls]fm{ea,fd} patterns.
2943 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2944 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2945 initialize it from memory. Make function static.
2946 (print_insn_{big,little}_arm): New functions.
2947 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2948 the correct endianness.
2950 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2952 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2955 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2957 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2958 17th, so that it builds again using GCC as the compiler.
2960 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2962 * mips-dis.c (print_insn_little_mips): Cast return value from
2963 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2964 expects an unsigned long, and that might be fewer words of
2965 argument storage (e.g., if bfd_vma is long long on a 32-bit
2967 (print_insn_big_mips): Likewise with bfd_getb32 value.
2968 (_print_insn_mips): Now static.
2970 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2972 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2973 gcc memory hog problem with initializer is fixed.
2975 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2977 Merge in support for Mac MPW as a host.
2978 (Old change descriptions retained for informational value.)
2980 * mpw-config.in (archname): Compute from the config.
2981 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2983 * mpw-config.in (target_arch): Compute from canonical target.
2984 (m68k, mips, powerpc, sparc): Add architectures.
2985 * mpw-make.in (disassemble.c.o): Add.
2986 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2988 * mpw-config.in (BFD_MACHINES): Set to a default value.
2989 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2991 * mpw-make.in (CSEARCH): Add extra-include to search path.
2993 * mpw-config.in (varargs.h): Don't create.
2994 (sysdep.h): Create using forward-include.
2995 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2997 * mpw-config.in: New file, MPW version of configure.in.
2998 * mpw-make.in: New file, MPW version of Makefile.in.
3000 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3002 * alpha-dis.c (print_insn_alpha): Put empty statement after
3005 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
3007 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
3008 (low_sign_extend): Likewise.
3009 (get_field): Delete unused function.
3010 (set_field, deposit_14, deposit_21): Likewise.
3012 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3014 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
3017 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
3019 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
3021 * alpha-opc.h (OSF_ASMCODE): define
3022 print pal-code names as defined in App C of the
3023 Alpha Architecture Reference Manual
3025 * alpha-dis.c: cleaned up output
3026 print stylized code forms as defined in App A.4.3 of the
3027 Alpha Architecture Reference Manual
3029 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
3031 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
3033 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
3036 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3038 * m68k-dis.c (opcode): New function. Returns address of opcode
3039 table entry given index, even if the opcode table was split to
3040 work around gcc bugs.
3041 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
3043 (BREAK_UP_BIG_DECL): Make secondary array static and const.
3044 (reg_names): Now const.
3045 (print_insn_arg): Arrays cacheFieldName and names now const.
3046 (print_indexed): Array scales now const.
3048 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
3050 * ppc-opc.c: Sort recently added instructions by minor opcode
3051 number within major opcode number.
3053 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
3055 * hppa-dis.c: Include libhppa.h.
3057 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
3059 * mips-opc.c: Change dli to use M_DLI, and add dla.
3061 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3063 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
3065 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
3067 * mips-opc.c: Add r4650 mul instruction.
3069 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
3071 * mips-opc.c: Add uld and usd macros for unaligned double load and
3074 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3076 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
3077 mfdcr, mtdcr, icbt, iccci.
3079 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
3081 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
3082 signed char fields to shorts, more portable.
3084 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
3086 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
3087 char fields as signed chars, since they may have negative values.
3089 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3091 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
3092 (mycroft@netbsd.org).
3094 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
3096 From "Logg, Ed" <elogg@ea.com>:
3097 * ppc-opc.c (extract_bdm): Correct parenthezisation.
3098 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
3101 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
3103 * ppc-opc.c: Changes based on patch from David Edelsohn
3104 <edelsohn@mhpcc.edu>.
3105 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
3108 (insert_tbr): New static function.
3109 (extract_tbr): New static function.
3110 (XFXFXM_MASK, XFXM): Define.
3111 (XSPRBAT_MASK, XSPRG_MASK): Define.
3112 (powerpc_opcodes): Add instructions to access special registers by
3113 name. Add mtcr and mftbu.
3115 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
3117 * mips-opc.c (P3): Define.
3118 (mips_opcodes): Add mad and madu.
3120 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
3122 * configure.in: Add W65 support.
3123 * disassemble.c: Likewise.
3124 * w65-opc.h, w65-dis.c: New files.
3126 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
3128 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
3131 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3133 * mips-opc.c: Add dli as a synonym for li.
3135 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
3137 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
3138 print something for reserved opcode values, even if it won't
3141 * mips-dis.c (_print_insn_mips): When initializing, shift right
3142 and mask, to avoid sign extension problems on the Alpha.
3144 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
3147 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
3149 * sh-opc.h (mov.l gbr): Get direction right.
3150 * sh-dis.c (print_insn_shx): New function.
3151 (print_insn_shl, print_insn_sh): Call print_insn_shx to
3152 print opcodes with right byte order.
3154 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
3156 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
3157 to avoid conflicts with getopt.
3159 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3161 * hppa-dis.c (print_insn_hppa): Read the instruction using
3162 bfd_getb32, so that it works on a little endian or 64 bit host.
3163 Remove unused local variable op.
3165 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3167 * mips-opc.c: Use or instead of addu for pseudo-op move, since
3168 addu does not work correctly if -mips3.
3170 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3172 * a29k-dis.c (print_special): Add special register names defined
3173 on 29030, 29040 and 29050.
3174 (print_insn): Handle new operand type 'I'.
3176 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3178 * Makefile.in (INSTALL): Use top level install.sh script.
3180 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3182 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
3183 that it works on a little endian host.
3185 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3187 * configure.in: Use ${config_shell} when running config.bfd.
3189 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3191 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
3193 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3195 * a29k-dis.c (print_insn): Print the opcode.
3197 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3199 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
3201 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
3203 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
3205 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3207 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
3208 which store a value into memory.
3210 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
3212 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
3213 * arm-dis.c, arm-opc.h: New files.
3215 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
3217 * Makefile.in (ns32k-dis.o): Add dependency.
3218 * ns32k-dis.c (print_insn_arg): Declare initialized local as
3219 string, not as array of chars.
3221 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3223 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
3225 * sparc-opc.c: Added sparclite extended FP operations, and
3226 versions of v9 impdep* instructions permitting specification of
3229 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3231 * i960-dis.c (reg_names): Now const.
3232 (struct sparse_tabent): New type, copied from array type in mem
3234 (ctrl): Local static array ctrl_tab now const.
3235 (cobr): Local static array cobr_tab now const.
3236 (mem): Local variables reg1, reg2, reg3 now point to const. Local
3237 static variable mem_tab no longer explicitly initialized. Changed
3238 mem_init to const array of struct sparse_tabent.
3239 (reg): Local static variable reg_tab no longer explicitly
3240 initialized. Changed reg_init to const array of struct
3242 (ea): Local static array scale_tab now const.
3244 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
3247 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
3249 * configure.bat: the disassember needs to be enabled for
3250 "objdump -d" to work in djgpp.
3252 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3254 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
3255 (invalid_float): Enabled general version, doesn't require running
3256 on ns32k host. Changed to take char* argument, and test for
3257 explicitly specified sizes, instead of using sizeof() on host CPU
3259 (INVALID_FLOAT): Cast first argument.
3260 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
3261 list_P032, list_M032): Now const.
3262 (optlist, list_search): Made appropriate arguments now point to
3264 (print_insn_arg): Changed static array of one-character-string
3265 pointers into a static const array of characters; fixed sprintf
3266 statement accordingly.
3268 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
3270 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
3271 from distribution. A ns32k-dis.c from a previous distribution has
3272 been brought up to date and supports the new interface.
3274 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
3276 * configure.in: add bfd_ns32k_arch target support.
3278 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
3279 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
3281 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
3283 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
3286 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
3288 * h8300-dis.c, mips-dis.c: Don't use true and false.
3290 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
3292 * configure.in: Change --with-targets to --enable-targets.
3294 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3296 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
3297 opcodes to the first instruction with that opcode, to speed
3298 disassembly of large files. From ralphc@pyramid.com (Ralph
3301 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3303 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
3305 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
3307 * configure.bat: update to latest makefile.in
3309 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
3311 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
3312 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
3313 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
3314 slot insn is in a delay slot.
3315 * z8k-opc.h: (resflg): Fix patterns.
3316 * h8500-opc.h Fix CR insn patterns.
3318 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3320 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
3321 "cmpl" before POWER versions, so that gas -many uses them.
3323 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3325 * disassemble.c: New file.
3326 * Makefile.in (OFILES): Add disassemble.o.
3327 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
3328 * configure.in: Define ARCHDEFS in Makefile. Code taken from
3329 binutils/configure.in.
3331 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
3332 opcode being examined.
3334 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3336 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
3337 (insert_ral, insert_ram, insert_ras): New functions.
3338 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
3339 RAS for store with update.
3341 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3343 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
3344 (edelsohn@npac.syr.edu).
3346 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3348 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
3351 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
3353 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
3355 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3357 * ppc-opc.c (powerpc_operands): The signedp field has been
3358 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
3359 instead. Add new operand SISIGNOPT.
3360 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
3361 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
3362 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
3365 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3367 * i386-dis.c (struct private): Renamed to dis_private. `private'
3368 is a reserved word for dynix cc.
3370 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3372 * configure.in: Change error message to refer to bfd/config.bfd
3373 rather than bfd/configure.in.
3375 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
3377 * ppc-opc.c: Define POWER2 as short alias flag.
3378 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
3381 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3383 * i960-dis.c (print_insn_i960): Don't read a second word for
3384 opcodes 0, 1, 2 and 3.
3386 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3388 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
3390 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3392 * m68881-ext.c: Removed; no longer used.
3393 * Makefile.in: Changed accordingly.
3395 * m68k-dis.c (ext_format_68881): Don't declare.
3396 (print_insn_m68k): If an instruction uses place 'i', it uses at
3397 least four fixed bytes.
3398 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
3399 extended float, convert to double using floatformat_to_double, not
3400 ieee_extended_to_double, and fetch the data before converting it.
3402 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3404 * mips-opc.c: It's sqrt.s, not sqrt.w. From
3405 davidj@ICSI.Berkeley.EDU (David Johnson).
3407 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3409 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
3410 PowerPC uses bdnz[l][a].
3412 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3414 * dis-buf.c, i386-dis.c: Include sysdep.h.
3416 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3418 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
3420 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
3421 by Motorola PowerPC 601 with PPC_OPCODE_601.
3422 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
3423 Disassemble Motorola PowerPC 601 instructions as well as normal
3424 PowerPC instructions.
3426 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
3428 * i960-dis.c (reg, mem): Just use a static array instead of
3431 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3433 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
3434 condition name index if this is for a negated condition.
3436 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
3437 Floating point format for 'H' operand is backwards from normal
3438 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
3439 operands (fmpyadd and fmpysub), handle bizarre register
3440 translation correctly for single precision format.
3442 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
3443 or 'I' operands if the next format specifier is 'M' (fcmp
3444 condition completer).
3446 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3448 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
3449 single number giving a bitmask for the MB and ME fields of an M
3450 form instruction. Change NB to accept 32, and turn it into 0;
3451 also turn 0 into 32 when disassembling. Seperated SH from NB.
3452 (insert_mbe, extract_mbe): New functions.
3453 (insert_nb, extract_nb): New functions.
3454 (SC_MASK): Mask out SA and LK bits.
3455 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
3456 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
3457 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
3458 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
3459 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
3460 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
3461 (powerpc_macros): Define table of macro definitions.
3462 (powerpc_num_macros): Define.
3464 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
3465 if PPC_OPERAND_NEXT is set.
3467 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3469 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
3470 char. Retrieve contents using bfd_getl32 instead of shifting.
3472 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3474 * ppc-opc.c: New file. Opcode table for PowerPC, including
3475 opcodes for POWER (RS/6000).
3476 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
3477 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
3478 (CFILES): Add ppc-dis.c.
3479 (ppc-dis.o, ppc-opc.o): New targets.
3480 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
3482 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3484 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
3485 No space before 'u', 'f', or 'N'.
3487 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
3489 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
3490 farther than we should.
3492 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3494 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3496 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3498 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3500 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3501 needs it, to prevent reading past the end of a section.
3503 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3505 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3506 Removed t,A case for la; always use t,A(b) case.
3508 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3510 From Ted Lemen <mellon@pepper.ncd.com>
3511 * mips-dis.c (print_insn_arg): Handle 'k'.
3512 * mips-opc.c: Make cache use k, not t.
3514 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3516 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
3517 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3518 FLOAT_FORMAT_CODE to put out floating point register names.
3520 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3522 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3524 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3526 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3528 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3530 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3531 larger than 32. Moved dsxx32 variants first for disassembler.
3533 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3535 * z8kgen.c, z8k-opc.h: Add full lda information.
3537 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
3539 * hppa-dis.c (print_insn_hppa): Do not emit a space after
3540 movb instructions. Any necessary space will be emitted by
3541 the code to handle nullification completers.
3543 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3545 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3547 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3549 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
3550 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3552 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3554 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3556 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3558 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3559 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3561 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3563 * m88k-dis.c (m88kdis): comment change. Remove space after
3565 (printop): handle new arg types DEC and XREG for m88110.
3567 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3569 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3570 type for absolute branch addresses. Delete special
3571 "ble" and "be" code in 'W' operand code.
3573 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3575 * mips-opc.c: Set hazard information correctly for branch
3576 likely instructions.
3578 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3580 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3581 info->fprintf_func for printing and info->print_address_func for
3584 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3586 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3588 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3590 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3591 Corrected second case of "b" for disassembler.
3593 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3595 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3596 to BFD swapping routines to correspond to BFD name changes.
3598 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3600 * mips-opc.c: Change div machine instruction to be z,s,t rather
3601 than s,t. Change div macro to be d,v,t rather than d,s,t.
3602 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3603 rem and remu which generates only the corresponding div
3604 instruction. This is for compatibility with the MIPS assembler,
3605 which only generates the simple machine instruction when an
3606 explicit destination of $0 is used.
3607 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3609 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3611 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3612 WR_31 hazard for bal, bgezal, bltzal.
3614 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3616 * hppa-dis.c (print_insn_hppa): Use print function
3617 from within the disassemble_info, not fprintf_filtered.
3619 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3621 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3622 Law, law@cs.utah.edu.)
3624 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3626 * mips-opc.c ("absu"): Removed.
3629 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3631 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3632 Changed hazard information to distinguish between memory load
3633 delays and coprocessor load delays.
3635 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3637 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3639 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3641 * configure.in: Don't pass cpu to config.bfd.
3643 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3645 * m88k-dis.c (m88kdis): Make class unsigned.
3647 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3649 * alpha-dis.c (print_insn_alpha): One branch format case was
3650 missing the instruction name.
3652 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3654 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3655 Add the arch-specific auxiliary files.
3656 (OFILES): Remove the arch-specific auxiliary files
3657 and use BFD_MACHINES instead of DIS_LIBS.
3658 * configure.in: Set BFD_MACHINES based on --with-targets option.
3660 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3662 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3665 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3667 * sparc-opc.c: Change CONST to const to deal with gcc
3668 -Dconst=__const -traditional.
3670 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3672 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3673 coprocessor instructions out of #if 0, and made them use new
3676 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3678 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3680 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3682 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3683 instruction, for use by the disassembler.
3685 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3686 hand-coded sign extensions that depended on 32-bit host ints.
3687 FIXME, we still depend on big-endian host bitfield ordering.
3688 (sparc_print_insn): Set the insn_info_valid field, and the
3689 other fields that describe the instruction being printed.
3691 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3693 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3694 `jmp' instead of just one of them.
3696 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3698 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3699 (fput_fp_reg_r): Renamed from fput_reg_r.
3700 (fput_fp_reg): New function.
3701 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3703 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3705 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3707 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3709 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3711 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3712 don't output a space.
3714 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3716 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3718 * mips-opc.c: New file, containing opcode table from
3719 ../include/opcode/mips.h.
3720 * Makefile.in: Add it.
3722 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3724 * m88k-dis.c: New file, moved in from gdb and changed to use the
3725 new dis-asm.h disassembler interface.
3726 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3727 (m88k-dis.o): New target.
3729 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3731 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3732 argument string const char * to correspond to opcode/mips.h.
3734 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3736 * mips-dis.c: Updated to account for name changes in new version
3738 * Makefile.in: Added header file dependencies.
3740 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3742 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3744 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3746 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3747 extend, rather than shifts.
3749 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3751 * Makefile.in: Undo 15 June change.
3753 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3755 * m68k-dis.c (print_insn_arg): Change return value to byte count
3757 * m68k-dis.c: Re-write to detect invalid operands before
3758 printing anything, so we can handle this the same way we
3759 handle invalid opcodes.
3761 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3763 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3765 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3767 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3770 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3772 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3774 * configure.in: Do make sysdep.h link.
3775 * Makefile.in: Search ../include. Don't search ../bfd.
3777 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3779 Changes from Jeff Law, law@cs.utah.edu:
3780 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3781 Do not print a space before the completers specified by
3784 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3786 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3787 defined, since gdb has been fixed.
3789 Changes from Jeff Law, law@cs.utah.edu:
3790 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3791 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3792 be a *disassemble_info, not a *FILE.
3793 * hppa-dis.c: Support 'd', '!', and 'a'.
3794 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3795 * hppa-dis.c: Delete cases which are no longer needed.
3797 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3799 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3801 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3803 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3806 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3808 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3809 * configure.in: No longer need to configure to get sysdep.h.
3811 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3813 * Patches from Jeffrey Law <law@cs.utah.edu>.
3814 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3815 templates for 1.1 FP computational instructions.
3817 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3819 * h8500-dis.c (print_insn_h8500): Address argument is type
3821 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3824 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3825 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3827 * sparc-dis.c (compare_opcodes): Move static declaration to
3830 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3832 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3833 instruction, remove unimp hack from 'l' argument.
3835 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3837 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3840 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3842 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3843 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3846 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3848 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3849 arrays of string pointers to 2-d arrays of chars, to save
3852 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3854 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3855 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3857 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3859 * hppa-dis.c: New file from Utah, adapted to new disassembler
3861 * Makefile.in: Include it.
3863 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3865 * sh-dis.c, sh-opc.h: New files.
3867 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3869 * alpha-dis.c, alpha-opc.h: New files.
3871 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3873 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3876 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3878 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3880 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3882 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3885 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3887 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3888 and double percent signs a few places.
3890 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3892 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3893 Use info->print_address_func not print_address.
3895 * dis-buf.c (generic_print_address): New function.
3897 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3899 * Makefile.in: Add sparc-dis.c.
3900 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3902 Add `add' instruction to the set that get checked
3903 for a preceding `sethi' in order to print an absolute address.
3904 * (print_insn): Disassembly prefers real instructions.
3905 (is_delayed_branch): Speed up.
3906 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3907 Still missing some float ops, and needs testing.
3908 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3909 F_ALIAS. Use printf, not fprintf, when not passing a file
3911 (compare_opcodes): Check that identical instructions have
3912 identical opcodes, complain otherwise.
3915 * Include reg_names.
3917 Use dis-asm.h/read_memory_func interface.
3919 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3921 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3922 deliberately return non-zero to setjmp from longjmp. Otherwise
3923 this code fails to compile.
3925 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3927 * m68k-dis.c: Fix prototype for fetch_arg().
3929 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3931 * dis-buf.c: New file, for new read_memory_func interface.
3932 Makefile.in (OFILES): Include it.
3933 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3934 Use new read_memory_func interface.
3936 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3938 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3939 * h8500-opc.h: Fix couple of opcodes.
3941 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3943 * Makefile.in: add dvi & installcheck targets
3945 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3947 * Makefile.in: Update for h8500-dis.c.
3949 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3951 * h8500-dis.c, h8500-opc.h: New files
3953 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3955 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3956 ../include/dis-asm.h.
3957 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3958 and ../gdb/m68k-pinsn.c).
3959 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3960 and ../gdb/i386-pinsn.c).
3961 * m68881-ext.c: New file. Moved definition of
3962 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3963 * Makefile.in: Adjust for new files.
3964 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3965 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3966 can be dis-assembled.
3968 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3970 * mips-dis.c (print_insn_arg): Now returns void.
3972 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3974 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3975 files that use the macros.
3977 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3979 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3980 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3981 (CFILES): Added mips-dis.c.
3983 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3985 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3986 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3988 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3990 * Makefile.in: Improve *clean rules.
3991 * configure.in: Allow a default host.
3993 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3995 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3996 files include other sysdep files
3998 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4000 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
4002 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
4004 * configure.in: For host support, use ../bfd/configure.host
4005 so it stays in sync with the ../bfd/hosts database.
4007 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4009 * configure.in: use cpu-vendor-os triple instead of nested cases
4011 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
4013 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
4014 *always* the wrong one.
4016 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4018 * z8kgen.c: added copyright info
4020 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4022 * z8k-dis.c (unparse_instr): prettier tabs
4023 * z8kgen.c -> z8k-opc.h: bug fixes in tables
4025 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
4027 * configure.in: Add ncr* configuration.
4028 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
4029 picayune ANSI compilers happy.
4031 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
4033 * configure.in (i386): Make i386 and i486 synonymous for now.
4034 * configure.in (i[34]86-*-sysv4): Add my_host definition.
4036 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
4038 * Makefile.in (install): Fix typo.
4040 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
4042 * Makefile.in (make): Remove obsolete crud.
4043 (sparc-opc.o): Avoid Sun Make VPATH bug.
4045 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
4047 * Makefile.in: since there are no SUBDIRS, remove rule and
4048 references of subdir_do.
4050 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
4052 * Makefile.in (install): Get the library name right here too.
4053 Don't install bfd.h, since it's unrelated to this library. No
4054 subdirs to recurse into, either.
4055 (CFILES): The source file has a .c suffix, not .o.
4057 * sparc-opc.c: New file, moved from BFD.
4058 * Makefile.in (OFILES): Build it.
4060 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
4062 * z8k-dis.c: fixed forward refferences of some declarations.
4064 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
4066 * Makefile.in: get the name of the library right
4068 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4070 * z8k-dis.c: knows how to disassemble z8k stuff
4071 * z8k-opc.h: new file full of z8000 opcodes
4075 version-control: never