1 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
3 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4 (opcode_bits, opcode_hash_table): New variables.
5 (opcodes_initialized): Renamed from opcodes_sorted.
6 (build_hash_table): New function.
7 (is_delayed_branch): Use hash table.
8 (print_insn): Renamed from print_insn_sparc, made static.
9 Build and use hash table. If !sparc64, ignore sparc64 insns,
10 and vice-versa if sparc64.
11 (print_insn_sparc, print_insn_sparc64): New functions.
12 (compare_opcodes): Move sparc64 opcodes to end.
13 Print commutative insns with constant second.
14 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
16 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
18 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
19 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
20 avoids printing a delay slot in a delay slot.
21 * sh-opc.h (sh_table): Fully bracket last entry.
23 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
25 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
27 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
29 * configure.in: Get host_makefile_frag from ${srcdir}.
31 * configure.in: Autoconfiscated. Check for string[s].h. Create
32 config.h from config.in. Don't set up sysdep.h link.
34 * configure, config.in: New files, generated from configure.in.
35 * Makefile.in: Updated to be processed autoconf-style.
36 (distclean): Keep sysdep.h. Remove config.log and config.cache.
37 (Makefile): Depend on config.status.
38 (config.status): New rule.
39 * configure.bat: Update Makefile substitutions.
41 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
43 * mips-opc.c (L1): Define.
44 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
45 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
48 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
50 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
51 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
52 have multiple add units but only a single logical unit.
54 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
55 shifted by 18, without any insertion or extraction function.
56 (insert_cr, extract_cr): Remove.
59 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
61 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
64 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
66 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
69 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
71 * mpw-config.in: Add sh and i386 configs, remove sparc config.
72 * sh-opc.h: Add copyright.
74 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
76 * Makefile.in (crunch-m68k): Delete extra target accidentally
77 checked in a while ago.
79 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
81 * sh-opc.h (sh_table): Add SH3 support.
83 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
85 * sh-opc.h: Added bsrf and braf.
87 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
89 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
90 bogus [ls]fm{ea,fd} patterns.
92 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
93 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
94 initialize it from memory. Make function static.
95 (print_insn_{big,little}_arm): New functions.
96 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
97 the correct endianness.
100 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
102 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
103 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
106 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
108 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
111 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
113 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
114 17th, so that it builds again using GCC as the compiler.
116 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
118 * mips-dis.c (print_insn_little_mips): Cast return value from
119 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
120 expects an unsigned long, and that might be fewer words of
121 argument storage (e.g., if bfd_vma is long long on a 32-bit
123 (print_insn_big_mips): Likewise with bfd_getb32 value.
124 (_print_insn_mips): Now static.
126 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
128 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
129 gcc memory hog problem with initializer is fixed.
132 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
134 * arc-opc.c (NULL): Define.
135 (arc_operands, insn fields u,s): Delete.
136 (arc_operands, insn fields a,b,c): Mark as signed.
137 (arc_opcodes): No longer const, links computed at run-time.
138 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
139 suffixes that affect the insn code.
140 (arc_opcodes): Resort table to macros are first.
141 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
142 (arc_opcodes, st [b] entry): Likewise.
143 (arc_opcodes, st [b,d] entry): Fix mask, value.
144 (arc_reg_names): Add entries for r29, r30, r31, r60.
145 (opcode_map, icode_map): New static globals.
146 (arc_opcode_init_tables): Initialize them.
147 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
148 (insert_shimmoffset): Signal error if register present.
150 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
153 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
155 Merge in support for Mac MPW as a host.
156 (Old change descriptions retained for informational value.)
158 * mpw-config.in (archname): Compute from the config.
159 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
161 * mpw-config.in (target_arch): Compute from canonical target.
162 (m68k, mips, powerpc, sparc): Add architectures.
163 * mpw-make.in (disassemble.c.o): Add.
164 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
166 * mpw-config.in (BFD_MACHINES): Set to a default value.
167 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
169 * mpw-make.in (CSEARCH): Add extra-include to search path.
171 * mpw-config.in (varargs.h): Don't create.
172 (sysdep.h): Create using forward-include.
173 * mpw-make.in (CSEARCH): Add include/mpw to search path.
175 * mpw-config.in: New file, MPW version of configure.in.
176 * mpw-make.in: New file, MPW version of Makefile.in.
179 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
181 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
182 Call arc_get_opcode_mach to map bfd mach number to opcode value.
183 (print_insn_*): Pass bfd mach number, not opcode version.
184 * arc-opc.c (arc_get_opcode_mach): New function.
187 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
189 * alpha-dis.c (print_insn_alpha): Put empty statement after
192 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
194 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
195 (low_sign_extend): Likewise.
196 (get_field): Delete unused function.
197 (set_field, deposit_14, deposit_21): Likewise.
199 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
201 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
204 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
206 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
208 * alpha-opc.h (OSF_ASMCODE): define
209 print pal-code names as defined in App C of the
210 Alpha Architecture Reference Manual
212 * alpha-dis.c: cleaned up output
213 print stylized code forms as defined in App A.4.3 of the
214 Alpha Architecture Reference Manual
216 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
218 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
220 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
223 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
225 * m68k-dis.c (opcode): New function. Returns address of opcode
226 table entry given index, even if the opcode table was split to
227 work around gcc bugs.
228 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
230 (BREAK_UP_BIG_DECL): Make secondary array static and const.
231 (reg_names): Now const.
232 (print_insn_arg): Arrays cacheFieldName and names now const.
233 (print_indexed): Array scales now const.
236 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
238 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
239 (print_insn_arc_{host,graphics,audio}): Likewise.
240 (print_insn): Add prototype.
241 (arc_get_disassembler): New arg `big_p'. Return little or big
242 print fn accordingly.
243 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
244 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
245 (arc_opval_supported): Likewise.
246 * disassemble.c (disassembler): Pass big endian flag to
247 arc_get_disassembler.
250 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
252 * ppc-opc.c: Sort recently added instructions by minor opcode
253 number within major opcode number.
255 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
257 * hppa-dis.c: Include libhppa.h.
259 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
261 * mips-opc.c: Change dli to use M_DLI, and add dla.
263 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
265 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
268 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
270 * arc-dis.c (arc_get_disassembler): Change argument to int,
271 one of bfd_mach_arc_xxx. All callers updated.
274 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
276 * mips-opc.c: Add r4650 mul instruction.
278 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
280 * mips-opc.c: Add uld and usd macros for unaligned double load and
283 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
285 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
286 mfdcr, mtdcr, icbt, iccci.
289 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
291 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
292 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
293 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
294 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
295 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
296 (insert_absaddr): New function.
298 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
300 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
301 New argument `cpu', pass it to arc_opcode_init_tables.
302 Document byte order dependencies. Ignore unsupported insns.
303 (arc_get_disassembler): New function.
304 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
305 print_insn_arc_audio): New functions.
306 * arc-opc.c (MULTSHIFT operand): Delete.
307 (UNSIGNED, SATURATION): New operands.
308 (mac, mul, mul64, mulu64): New insns.
309 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
310 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
311 (host,graphics,audio extended and auxiliary regs): Define.
312 (ss, sc, mh, ml): New suffixes.
313 (arc_opcode_supported, arc_opval_supported): New functions.
314 (insert_multshift, extract_multshift): Deleted.
315 * disassemble.c (disassembler, case bfd_arch_arc): Call
316 arc_get_disassembler to get disassembler routine.
319 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
321 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
322 signed char fields to shorts, more portable.
324 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
326 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
327 char fields as signed chars, since they may have negative values.
329 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
331 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
332 (mycroft@netbsd.org).
334 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
336 From "Logg, Ed" <elogg@ea.com>:
337 * ppc-opc.c (extract_bdm): Correct parenthezisation.
338 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
341 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
343 * ppc-opc.c: Changes based on patch from David Edelsohn
344 <edelsohn@mhpcc.edu>.
345 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
348 (insert_tbr): New static function.
349 (extract_tbr): New static function.
350 (XFXFXM_MASK, XFXM): Define.
351 (XSPRBAT_MASK, XSPRG_MASK): Define.
352 (powerpc_opcodes): Add instructions to access special registers by
353 name. Add mtcr and mftbu.
355 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
357 * mips-opc.c (P3): Define.
358 (mips_opcodes): Add mad and madu.
360 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
362 * configure.in: Add W65 support.
363 * disassemble.c: Likewise.
364 * w65-opc.h, w65-dis.c: New files.
366 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
368 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
372 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
374 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
376 * arc-opc.c (extract_reladdr): New function.
377 (insert_reladdr): Store address right-shifted by 2.
380 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
382 * mips-opc.c: Add dli as a synonym for li.
385 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
387 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
389 (extraction fns): Insn argument now array of two words. Return pointer
390 to value's table entry. All uses changed.
391 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
392 (insert_multshift, extract_multshift): New fns.
393 (arc_operands): Add support for cache bypass suffix. Add support for
394 predefined aux regs. Modifier bits moved to flags field.
395 (arc_opcodes): Likewise.
396 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
397 New insn rlc. Update to syntax in programmer's manual.
398 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
399 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
401 (arc_opcode_init_tables): New argument to indicate cpu type.
402 (insert_reg): Handle predefined aux regs.
403 (extract_reg): Likewise.
404 (lookup_register): New fn.
405 * arc-dis.c (arc_condition_codes): Deleted.
406 (print_insn_arc): Handle insns with 32 bit immediate constants better.
407 Clean up modifier handling. Handle predefined aux regs.
410 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
412 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
413 print something for reserved opcode values, even if it won't
416 * mips-dis.c (_print_insn_mips): When initializing, shift right
417 and mask, to avoid sign extension problems on the Alpha.
419 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
423 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
425 * configure.in: Add ARC support.
426 * disassemble.c: Likewise.
427 * arc-dis.c, arc-opc.c: New files.
430 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
432 * sh-opc.h (mov.l gbr): Get direction right.
433 * sh-dis.c (print_insn_shx): New function.
434 (print_insn_shl, print_insn_sh): Call print_insn_shx to
435 print opcodes with right byte order.
437 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
439 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
440 to avoid conflicts with getopt.
442 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
444 * hppa-dis.c (print_insn_hppa): Read the instruction using
445 bfd_getb32, so that it works on a little endian or 64 bit host.
446 Remove unused local variable op.
448 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
450 * mips-opc.c: Use or instead of addu for pseudo-op move, since
451 addu does not work correctly if -mips3.
453 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
455 * a29k-dis.c (print_special): Add special register names defined
456 on 29030, 29040 and 29050.
457 (print_insn): Handle new operand type 'I'.
459 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
461 * Makefile.in (INSTALL): Use top level install.sh script.
463 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
465 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
466 that it works on a little endian host.
468 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
470 * configure.in: Use ${config_shell} when running config.bfd.
472 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
474 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
476 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
478 * a29k-dis.c (print_insn): Print the opcode.
480 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
482 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
484 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
486 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
488 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
490 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
491 which store a value into memory.
493 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
495 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
496 * arm-dis.c, arm-opc.h: New files.
498 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
500 * Makefile.in (ns32k-dis.o): Add dependency.
501 * ns32k-dis.c (print_insn_arg): Declare initialized local as
502 string, not as array of chars.
504 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
506 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
508 * sparc-opc.c: Added sparclite extended FP operations, and
509 versions of v9 impdep* instructions permitting specification of
512 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
514 * i960-dis.c (reg_names): Now const.
515 (struct sparse_tabent): New type, copied from array type in mem
517 (ctrl): Local static array ctrl_tab now const.
518 (cobr): Local static array cobr_tab now const.
519 (mem): Local variables reg1, reg2, reg3 now point to const. Local
520 static variable mem_tab no longer explicitly initialized. Changed
521 mem_init to const array of struct sparse_tabent.
522 (reg): Local static variable reg_tab no longer explicitly
523 initialized. Changed reg_init to const array of struct
525 (ea): Local static array scale_tab now const.
527 start-sanitize-i960xl
528 * i960-dis.c (reg): Added i960XL instructions to reg_init table.
532 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
534 * configure.bat: the disassember needs to be enabled for
535 "objdump -d" to work in djgpp.
537 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
539 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
540 (invalid_float): Enabled general version, doesn't require running
541 on ns32k host. Changed to take char* argument, and test for
542 explicitly specified sizes, instead of using sizeof() on host CPU
544 (INVALID_FLOAT): Cast first argument.
545 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
546 list_P032, list_M032): Now const.
547 (optlist, list_search): Made appropriate arguments now point to
549 (print_insn_arg): Changed static array of one-character-string
550 pointers into a static const array of characters; fixed sprintf
551 statement accordingly.
553 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
555 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
556 from distribution. A ns32k-dis.c from a previous distribution has
557 been brought up to date and supports the new interface.
559 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
561 * configure.in: add bfd_ns32k_arch target support.
563 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
564 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
566 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
568 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
571 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
573 * h8300-dis.c, mips-dis.c: Don't use true and false.
575 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
577 * configure.in: Change --with-targets to --enable-targets.
579 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
581 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
582 opcodes to the first instruction with that opcode, to speed
583 disassembly of large files. From ralphc@pyramid.com (Ralph
586 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
588 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
590 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
592 * configure.bat: update to latest makefile.in
594 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
596 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
597 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
598 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
599 slot insn is in a delay slot.
600 * z8k-opc.h: (resflg): Fix patterns.
601 * h8500-opc.h Fix CR insn patterns.
603 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
605 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
606 "cmpl" before POWER versions, so that gas -many uses them.
608 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
610 * disassemble.c: New file.
611 * Makefile.in (OFILES): Add disassemble.o.
612 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
613 * configure.in: Define ARCHDEFS in Makefile. Code taken from
614 binutils/configure.in.
616 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
617 opcode being examined.
619 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
621 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
622 (insert_ral, insert_ram, insert_ras): New functions.
623 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
624 RAS for store with update.
626 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
628 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
629 (edelsohn@npac.syr.edu).
631 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
633 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
636 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
638 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
640 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
642 * ppc-opc.c (powerpc_operands): The signedp field has been
643 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
644 instead. Add new operand SISIGNOPT.
645 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
646 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
647 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
650 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
652 * i386-dis.c (struct private): Renamed to dis_private. `private'
653 is a reserved word for dynix cc.
655 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
657 * configure.in: Change error message to refer to bfd/config.bfd
658 rather than bfd/configure.in.
660 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
662 * ppc-opc.c: Define POWER2 as short alias flag.
663 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
666 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
668 * i960-dis.c (print_insn_i960): Don't read a second word for
669 opcodes 0, 1, 2 and 3.
671 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
673 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
675 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
677 * m68881-ext.c: Removed; no longer used.
678 * Makefile.in: Changed accordingly.
680 * m68k-dis.c (ext_format_68881): Don't declare.
681 (print_insn_m68k): If an instruction uses place 'i', it uses at
682 least four fixed bytes.
683 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
684 extended float, convert to double using floatformat_to_double, not
685 ieee_extended_to_double, and fetch the data before converting it.
687 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
689 * mips-opc.c: It's sqrt.s, not sqrt.w. From
690 davidj@ICSI.Berkeley.EDU (David Johnson).
692 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
694 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
695 PowerPC uses bdnz[l][a].
697 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
699 * dis-buf.c, i386-dis.c: Include sysdep.h.
701 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
703 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
705 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
706 by Motorola PowerPC 601 with PPC_OPCODE_601.
707 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
708 Disassemble Motorola PowerPC 601 instructions as well as normal
709 PowerPC instructions.
711 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
713 * i960-dis.c (reg, mem): Just use a static array instead of
716 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
718 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
719 condition name index if this is for a negated condition.
721 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
722 Floating point format for 'H' operand is backwards from normal
723 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
724 operands (fmpyadd and fmpysub), handle bizarre register
725 translation correctly for single precision format.
727 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
728 or 'I' operands if the next format specifier is 'M' (fcmp
729 condition completer).
731 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
733 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
734 single number giving a bitmask for the MB and ME fields of an M
735 form instruction. Change NB to accept 32, and turn it into 0;
736 also turn 0 into 32 when disassembling. Seperated SH from NB.
737 (insert_mbe, extract_mbe): New functions.
738 (insert_nb, extract_nb): New functions.
739 (SC_MASK): Mask out SA and LK bits.
740 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
741 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
742 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
743 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
744 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
745 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
746 (powerpc_macros): Define table of macro definitions.
747 (powerpc_num_macros): Define.
749 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
750 if PPC_OPERAND_NEXT is set.
752 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
754 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
755 char. Retrieve contents using bfd_getl32 instead of shifting.
757 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
759 * ppc-opc.c: New file. Opcode table for PowerPC, including
760 opcodes for POWER (RS/6000).
761 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
762 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
763 (CFILES): Add ppc-dis.c.
764 (ppc-dis.o, ppc-opc.o): New targets.
765 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
767 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
769 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
770 No space before 'u', 'f', or 'N'.
772 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
774 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
775 farther than we should.
777 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
779 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
781 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
783 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
785 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
786 needs it, to prevent reading past the end of a section.
788 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
790 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
791 Removed t,A case for la; always use t,A(b) case.
793 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
795 From Ted Lemen <mellon@pepper.ncd.com>
796 * mips-dis.c (print_insn_arg): Handle 'k'.
797 * mips-opc.c: Make cache use k, not t.
799 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
801 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
802 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
803 FLOAT_FORMAT_CODE to put out floating point register names.
805 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
807 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
809 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
811 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
813 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
815 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
816 larger than 32. Moved dsxx32 variants first for disassembler.
818 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
820 * z8kgen.c, z8k-opc.h: Add full lda information.
822 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
824 * hppa-dis.c (print_insn_hppa): Do not emit a space after
825 movb instructions. Any necessary space will be emitted by
826 the code to handle nullification completers.
828 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
830 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
832 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
834 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
835 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
837 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
839 * mips-opc.c: Correct lwu opcode value (book had it wrong).
841 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
843 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
844 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
846 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
848 * m88k-dis.c (m88kdis): comment change. Remove space after
850 (printop): handle new arg types DEC and XREG for m88110.
852 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
854 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
855 type for absolute branch addresses. Delete special
856 "ble" and "be" code in 'W' operand code.
858 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
860 * mips-opc.c: Set hazard information correctly for branch
863 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
865 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
866 info->fprintf_func for printing and info->print_address_func for
869 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
871 * mips-opc.c: Set INSN_TRAP for tXX instructions.
873 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
875 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
876 Corrected second case of "b" for disassembler.
878 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
880 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
881 to BFD swapping routines to correspond to BFD name changes.
883 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
885 * mips-opc.c: Change div machine instruction to be z,s,t rather
886 than s,t. Change div macro to be d,v,t rather than d,s,t.
887 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
888 rem and remu which generates only the corresponding div
889 instruction. This is for compatibility with the MIPS assembler,
890 which only generates the simple machine instruction when an
891 explicit destination of $0 is used.
892 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
894 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
896 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
897 WR_31 hazard for bal, bgezal, bltzal.
899 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
901 * hppa-dis.c (print_insn_hppa): Use print function
902 from within the disassemble_info, not fprintf_filtered.
904 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
906 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
907 Law, law@cs.utah.edu.)
909 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
911 * mips-opc.c ("absu"): Removed.
914 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
916 * mips-opc.c: Added r6000 and r4000 instructions and macros.
917 Changed hazard information to distinguish between memory load
918 delays and coprocessor load delays.
920 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
922 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
924 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
926 * configure.in: Don't pass cpu to config.bfd.
928 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
930 * m88k-dis.c (m88kdis): Make class unsigned.
932 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
934 * alpha-dis.c (print_insn_alpha): One branch format case was
935 missing the instruction name.
937 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
939 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
940 Add the arch-specific auxiliary files.
941 (OFILES): Remove the arch-specific auxiliary files
942 and use BFD_MACHINES instead of DIS_LIBS.
943 * configure.in: Set BFD_MACHINES based on --with-targets option.
945 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
947 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
950 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
952 * sparc-opc.c: Change CONST to const to deal with gcc
953 -Dconst=__const -traditional.
955 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
957 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
958 coprocessor instructions out of #if 0, and made them use new
961 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
963 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
965 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
967 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
968 instruction, for use by the disassembler.
970 * sparc-dis.c (SEX): Add sign extension macro. Replace many
971 hand-coded sign extensions that depended on 32-bit host ints.
972 FIXME, we still depend on big-endian host bitfield ordering.
973 (sparc_print_insn): Set the insn_info_valid field, and the
974 other fields that describe the instruction being printed.
976 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
978 * sparc-opc.c (call): Accept all 6 addressing modes valid for
979 `jmp' instead of just one of them.
981 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
983 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
984 (fput_fp_reg_r): Renamed from fput_reg_r.
985 (fput_fp_reg): New function.
986 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
988 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
990 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
992 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
994 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
996 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
997 don't output a space.
999 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
1001 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
1003 * mips-opc.c: New file, containing opcode table from
1004 ../include/opcode/mips.h.
1005 * Makefile.in: Add it.
1007 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1009 * m88k-dis.c: New file, moved in from gdb and changed to use the
1010 new dis-asm.h disassembler interface.
1011 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
1012 (m88k-dis.o): New target.
1014 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
1016 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
1017 argument string const char * to correspond to opcode/mips.h.
1019 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
1021 * mips-dis.c: Updated to account for name changes in new version
1023 * Makefile.in: Added header file dependencies.
1025 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
1027 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
1029 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1031 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
1032 extend, rather than shifts.
1034 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
1036 * Makefile.in: Undo 15 June change.
1038 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
1040 * m68k-dis.c (print_insn_arg): Change return value to byte count
1042 * m68k-dis.c: Re-write to detect invalid operands before
1043 printing anything, so we can handle this the same way we
1044 handle invalid opcodes.
1046 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1048 * sh-dis.c, sh-opc.h: Understand some more opcodes.
1050 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
1052 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
1055 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1057 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
1059 * configure.in: Do make sysdep.h link.
1060 * Makefile.in: Search ../include. Don't search ../bfd.
1062 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
1064 Changes from Jeff Law, law@cs.utah.edu:
1065 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
1066 Do not print a space before the completers specified by
1069 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
1071 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
1072 defined, since gdb has been fixed.
1074 Changes from Jeff Law, law@cs.utah.edu:
1075 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
1076 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
1077 be a *disassemble_info, not a *FILE.
1078 * hppa-dis.c: Support 'd', '!', and 'a'.
1079 * hppa-dis.c: Support 's' to extract a 2 bit space register.
1080 * hppa-dis.c: Delete cases which are no longer needed.
1082 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
1084 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
1086 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1088 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
1091 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
1093 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
1094 * configure.in: No longer need to configure to get sysdep.h.
1096 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
1098 * Patches from Jeffrey Law <law@cs.utah.edu>.
1099 * hppa-dis.c: Support 'I', 'J', and 'K' in output
1100 templates for 1.1 FP computational instructions.
1102 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1104 * h8500-dis.c (print_insn_h8500): Address argument is type
1106 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
1109 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
1110 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
1112 * sparc-dis.c (compare_opcodes): Move static declaration to
1115 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1117 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
1118 instruction, remove unimp hack from 'l' argument.
1120 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
1122 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
1125 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
1127 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
1128 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
1131 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1133 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
1134 arrays of string pointers to 2-d arrays of chars, to save
1137 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
1139 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
1140 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
1142 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1144 * hppa-dis.c: New file from Utah, adapted to new disassembler
1146 * Makefile.in: Include it.
1148 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1150 * sh-dis.c, sh-opc.h: New files.
1152 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1154 * alpha-dis.c, alpha-opc.h: New files.
1156 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1158 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
1161 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
1163 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
1165 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
1167 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
1170 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
1172 * sparc-dis.c: Use fprintf_func a few places where I forgot,
1173 and double percent signs a few places.
1175 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
1177 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
1178 Use info->print_address_func not print_address.
1180 * dis-buf.c (generic_print_address): New function.
1182 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1184 * Makefile.in: Add sparc-dis.c.
1185 sparc-dis.c: New file, merges binutils and gdb versions as follows:
1187 Add `add' instruction to the set that get checked
1188 for a preceding `sethi' in order to print an absolute address.
1189 * (print_insn): Disassembly prefers real instructions.
1190 (is_delayed_branch): Speed up.
1191 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
1192 Still missing some float ops, and needs testing.
1193 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
1194 F_ALIAS. Use printf, not fprintf, when not passing a file
1196 (compare_opcodes): Check that identical instructions have
1197 identical opcodes, complain otherwise.
1200 * Include reg_names.
1202 Use dis-asm.h/read_memory_func interface.
1204 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
1206 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
1207 deliberately return non-zero to setjmp from longjmp. Otherwise
1208 this code fails to compile.
1210 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
1212 * m68k-dis.c: Fix prototype for fetch_arg().
1214 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1216 * dis-buf.c: New file, for new read_memory_func interface.
1217 Makefile.in (OFILES): Include it.
1218 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
1219 Use new read_memory_func interface.
1221 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1223 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
1224 * h8500-opc.h: Fix couple of opcodes.
1226 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
1228 * Makefile.in: add dvi & installcheck targets
1230 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
1232 * Makefile.in: Update for h8500-dis.c.
1234 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1236 * h8500-dis.c, h8500-opc.h: New files
1238 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
1240 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
1241 ../include/dis-asm.h.
1242 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
1243 and ../gdb/m68k-pinsn.c).
1244 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
1245 and ../gdb/i386-pinsn.c).
1246 * m68881-ext.c: New file. Moved definition of
1247 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
1248 * Makefile.in: Adjust for new files.
1249 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
1250 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
1251 can be dis-assembled.
1253 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1255 * mips-dis.c (print_insn_arg): Now returns void.
1257 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
1259 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
1260 files that use the macros.
1262 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1264 * mips-dis.c: New file, from gdb/mips-pinsn.c.
1265 * Makefile.in (DIS_LIBS): Added mips-dis.o.
1266 (CFILES): Added mips-dis.c.
1268 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1270 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
1271 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
1273 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
1275 * Makefile.in: Improve *clean rules.
1276 * configure.in: Allow a default host.
1278 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1280 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
1281 files include other sysdep files
1283 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1285 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
1287 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
1289 * configure.in: For host support, use ../bfd/configure.host
1290 so it stays in sync with the ../bfd/hosts database.
1292 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1294 * configure.in: use cpu-vendor-os triple instead of nested cases
1296 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
1298 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
1299 *always* the wrong one.
1301 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1303 * z8kgen.c: added copyright info
1305 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1307 * z8k-dis.c (unparse_instr): prettier tabs
1308 * z8kgen.c -> z8k-opc.h: bug fixes in tables
1310 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
1312 * configure.in: Add ncr* configuration.
1313 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
1314 picayune ANSI compilers happy.
1316 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
1318 * configure.in (i386): Make i386 and i486 synonymous for now.
1319 * configure.in (i[34]86-*-sysv4): Add my_host definition.
1321 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
1323 * Makefile.in (install): Fix typo.
1325 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
1327 * Makefile.in (make): Remove obsolete crud.
1328 (sparc-opc.o): Avoid Sun Make VPATH bug.
1330 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
1332 * Makefile.in: since there are no SUBDIRS, remove rule and
1333 references of subdir_do.
1335 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
1337 * Makefile.in (install): Get the library name right here too.
1338 Don't install bfd.h, since it's unrelated to this library. No
1339 subdirs to recurse into, either.
1340 (CFILES): The source file has a .c suffix, not .o.
1342 * sparc-opc.c: New file, moved from BFD.
1343 * Makefile.in (OFILES): Build it.
1345 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
1347 * z8k-dis.c: fixed forward refferences of some declarations.
1349 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
1351 * Makefile.in: get the name of the library right
1353 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1355 * z8k-dis.c: knows how to disassemble z8k stuff
1356 * z8k-opc.h: new file full of z8000 opcodes
1360 version-control: never