opcodes/ChangeLog

   1 2012-05-17  James Lemke  <jwlemke@codesourcery.com>
   2
   3         * ppc-opc.c (powerpc_macros): Add entries for e_extlwi to e_clrlslwi.
   4
   5 2012-05-17  James Lemke  <jwlemke@codesourcery.com>
   6
   7         * ppc-opc.c (extract_sprg): Use ALLOW8_SPRG to include VLE.
   8
   9 2012-05-17  Daniel Richard G.  <skunk@iskunk.org>
  10             Nick Clifton  <nickc@redhat.com>
  11
  12         PR 14072
  13         * configure.in: Add check that sysdep.h has been included before
  14         any system header files.
  15         * configure: Regenerate.
  16         * config.in: Regenerate.
  17         * sysdep.h: Generate an error if included before config.h.
  18         * alpha-opc.c: Include sysdep.h before any other header file.
  19         * alpha-dis.c: Likewise.
  20         * avr-dis.c: Likewise.
  21         * cgen-opc.c: Likewise.
  22         * cr16-dis.c: Likewise.
  23         * cris-dis.c: Likewise.
  24         * crx-dis.c: Likewise.
  25         * d10v-dis.c: Likewise.
  26         * d10v-opc.c: Likewise.
  27         * d30v-dis.c: Likewise.
  28         * d30v-opc.c: Likewise.
  29         * h8500-dis.c: Likewise.
  30         * i370-dis.c: Likewise.
  31         * i370-opc.c: Likewise.
  32         * m10200-dis.c: Likewise.
  33         * m10300-dis.c: Likewise.
  34         * micromips-opc.c: Likewise.
  35         * mips-opc.c: Likewise.
  36         * mips61-opc.c: Likewise.
  37         * moxie-dis.c: Likewise.
  38         * or32-opc.c: Likewise.
  39         * pj-dis.c: Likewise.
  40         * ppc-dis.c: Likewise.
  41         * ppc-opc.c: Likewise.
  42         * s390-dis.c: Likewise.
  43         * sh-dis.c: Likewise.
  44         * sh64-dis.c: Likewise.
  45         * sparc-dis.c: Likewise.
  46         * sparc-opc.c: Likewise.
  47         * spu-dis.c: Likewise.
  48         * tic30-dis.c: Likewise.
  49         * tic54x-dis.c: Likewise.
  50         * tic80-dis.c: Likewise.
  51         * tic80-opc.c: Likewise.
  52         * tilegx-dis.c: Likewise.
  53         * tilepro-dis.c: Likewise.
  54         * v850-dis.c: Likewise.
  55         * v850-opc.c: Likewise.
  56         * vax-dis.c: Likewise.
  57         * w65-dis.c: Likewise.
  58         * xgate-dis.c: Likewise.
  59         * xtensa-dis.c: Likewise.
  60         * rl78-decode.opc: Likewise.
  61         * rl78-decode.c: Regenerate.
  62         * rx-decode.opc: Likewise.
  63         * rx-decode.c: Regenerate.
  64
  65 2012-05-17  Alan Modra  <amodra@gmail.com>
  66
  67         * ppc_dis.c: Don't include elf/ppc.h.
  68
  69 2012-05-16  Meador Inge  <meadori@codesourcery.com>
  70
  71         * arm-dis.c (arm_opcodes): Don't disassemble STMFD/LDMIA sp!, {reg}
  72         to PUSH/POP {reg}.
  73
  74 2012-05-15  James Murray <jsm@jsm-net.demon.co.uk>
  75             Stephane Carrez <stcarrez@nerim.fr>
  76
  77         * configure.in: Add S12X and XGATE co-processor support to m68hc11
  78         target.
  79         * disassemble.c: Likewise.
  80         * configure: Regenerate.
  81         * m68hc11-dis.c: Make objdump output more consistent, use hex
  82         instead of decimal and use 0x prefix for hex.
  83         * m68hc11-opc.c: Add S12X and XGATE opcodes.
  84
  85 2012-05-14  James Lemke  <jwlemke@codesourcery.com>
  86
  87         * ppc-dis.c (get_powerpc_dialect): Use is_ppc_vle.
  88         (PPC_OPCD_SEGS, VLE_OPCD_SEGS): New defines.
  89         (vle_opcd_indices): New array.
  90         (lookup_vle): New function.
  91         (disassemble_init_powerpc): Revise for second (VLE) opcode table.
  92         (print_insn_powerpc): Likewise.
  93         * ppc-opc.c: Likewise.
  94
  95 2012-05-14  Catherine Moore  <clm@codesourcery.com>
  96             Maciej W. Rozycki  <macro@codesourcery.com>
  97             Rhonda Wittels  <rhonda@codesourcery.com>
  98             Nathan Froyd <froydnj@codesourcery.com>
  99
 100         * ppc-opc.c (insert_arx, extract_arx): New functions.
 101         (insert_ary, extract_ary): New functions.
 102         (insert_li20, extract_li20): New functions.
 103         (insert_rx, extract_rx): New functions.
 104         (insert_ry, extract_ry): New functions.
 105         (insert_sci8, extract_sci8): New functions.
 106         (insert_sci8n, extract_sci8n): New functions.
 107         (insert_sd4h, extract_sd4h): New functions.
 108         (insert_sd4w, extract_sd4w): New functions.
 109         (insert_vlesi, extract_vlesi): New functions.
 110         (insert_vlensi, extract_vlensi): New functions.
 111         (insert_vleui, extract_vleui): New functions.
 112         (insert_vleil, extract_vleil): New functions.
 113         (BI_MASK, BB_MASK, BT): Use PPC_OPERAND_CR_BIT.
 114         (BI16, BI32, BO32, B8): New.
 115         (B15, B24, CRD32, CRS): New.
 116         (CRD, OBF, BFA, CR, CRFS): Use PPC_OPERAND_CR_REG.
 117         (DB, IMM20, RD, Rx, ARX, RY, RZ): New.
 118         (ARY, SCLSCI8, SCLSCI8N, SE_SD, SE_SDH): New.
 119         (SH6_MASK): Use PPC_OPSHIFT_INV.
 120         (SI8, UI5, OIMM5, UI7, BO16): New.
 121         (VLESIMM, VLENSIMM, VLEUIMM, VLEUIMML): New.
 122         (XT6, XA6, XB6, XB6S, XC6): Use PPC_OPSHIFT_INV.
 123         (ALLOW8_SPRG): New.
 124         (insert_sprg, extract_sprg): Check ALLOW8_SPRG.
 125         (OPVUP, OPVUP_MASK OPVUP): New
 126         (BD8, BD8_MASK, BD8IO, BD8IO_MASK): New.
 127         (EBD8IO, EBD8IO1_MASK, EBD8IO2_MASK, EBD8IO3_MASK): New.
 128         (BD15, BD15_MASK, EBD15, EBD15_MASK, EBD15BI, EBD15BI_MASK): New.
 129         (BD24,BD24_MASK, C_LK, C_LK_MASK, C, C_MASK): New.
 130         (IA16, IA16_MASK, I16A, I16A_MASK, I16L, I16L_MASK): New.
 131         (IM7, IM7_MASK, LI20, LI20_MASK, SCI8, SCI8_MASK): New.
 132         (SCI8BF, SCI8BF_MASK, SD4, SD4_MASK): New.
 133         (SE_IM5, SE_IM5_MASK): New.
 134         (SE_R, SE_R_MASK, SE_RR, SE_RR_MASK): New.
 135         (EX, EX_MASK, BO16F, BO16T, BO32F, BO32T): New.
 136         (BO32DNZ, BO32DZ): New.
 137         (NO371, PPCSPE, PPCISEL, PPCEFS, MULHW): Include PPC_OPCODE_VLE.
 138         (PPCVLE): New.
 139         (powerpc_opcodes): Add new VLE instructions.  Update existing
 140         instruction to include PPCVLE if supported.
 141         * ppc-dis.c (ppc_opts): Add vle entry.
 142         (get_powerpc_dialect): New function.
 143         (powerpc_init_dialect): VLE support.
 144         (print_insn_big_powerpc): Call get_powerpc_dialect.
 145         (print_insn_little_powerpc): Likewise.
 146         (operand_value_powerpc): Handle negative shift counts.
 147         (print_insn_powerpc): Handle 2-byte instruction lengths.
 148
 149 2012-05-11  Daniel Richard G.  <skunk@iskunk.org>
 150
 151         PR binutils/14028
 152         * configure.in: Invoke ACX_HEADER_STRING.
 153         * configure: Regenerate.
 154         * config.in: Regenerate.
 155         * sysdep.h: If STRINGS_WITH_STRING is defined then include both
 156         string.h and strings.h.
 157
 158 2012-05-11  Nick Clifton  <nickc@redhat.com>
 159
 160         PR binutils/14006
 161         * arm-dis.c (print_insn): Fix detection of instruction mode in
 162         files containing multiple executable sections.
 163
 164 2012-05-03  Sean Keys  <skeys@ipdatasys.com>
 165
 166         * Makefile.in, configure: regenerate
 167         * disassemble.c (disassembler): Recognize ARCH_XGATE.
 168         * xgate-dis.c (read_memory, print_insn, print_insn_xgate):
 169         New functions.
 170         * configure.in: Recognize xgate.
 171         * xgate-dis.c, xgate-opc.c: New files for support of xgate
 172         * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
 173         and opcode generation for xgate.
 174
 175 2012-04-30  DJ Delorie  <dj@redhat.com>
 176
 177         * rx-decode.opc (MOV): Do not sign-extend immediates which are
 178         already the maximum bit size.
 179         * rx-decode.c: Regenerate.
 180
 181 2012-04-27  David S. Miller  <davem@davemloft.net>
 182
 183         * sparc-dis.c (v9a_asr_reg_names): Add 'cfr'.
 184         * sparc-opc.c (sparc_opcodes): Add rd/wr cases for %cfr.
 185
 186         * sparc-opc.c (sparc_opcodes): Add 'wr X, %pause' and 'pause'.
 187         * sparc-dis.c (v9a_asr_reg_names): Add 'pause'.
 188
 189         * sparc-opc.c (CBCOND): New define.
 190         (CBCOND_XCC): Likewise.
 191         (cbcond): New helper macro.
 192         (sparc_opcodes): Add compare-and-branch instructions.
 193
 194         * sparc-dis.c (print_insn_sparc): Handle ')'.
 195         * sparc-opc.c (sparc_opcodes): Add crypto instructions.
 196
 197         * sparc-opc.c (sparc_opcodes): Rework table to put HWCAP values
 198         into new struct sparc_opcode 'hwcaps' field instead of 'flags'.
 199
 200 2012-04-12  David S. Miller  <davem@davemloft.net>
 201
 202         * sparc-dis.c (X_DISP10): Define.
 203         (print_insn_sparc): Handle '='.
 204
 205 2012-04-01  Mike Frysinger  <vapier@gentoo.org>
 206
 207         * bfin-dis.c (fmtconst): Replace decimal handling with a single
 208         sprintf call and the '*' field width.
 209
 210 2012-03-23  Maxim Kuvyrkov  <maxim@codesourcery.com>
 211
 212         * mips-dis.c (mips_arch_choices): Add entry for Broadcom XLP.
 213
 214 2012-03-16  Alan Modra  <amodra@gmail.com>
 215
 216         * ppc-dis.c (PPC_OPC_SEGS, PPC_OP_TO_SEG): Delete.
 217         (powerpc_opcd_indices): Bump array size.
 218         (disassemble_init_powerpc): Set powerpc_opcd_indices entries
 219         corresponding to unused opcodes to following entry.
 220         (lookup_powerpc): New function, extracted and optimised from..
 221         (print_insn_powerpc): ..here.
 222
 223 2012-03-15  Alan Modra  <amodra@gmail.com>
 224             James Lemke  <jwlemke@codesourcery.com>
 225
 226         * disassemble.c (disassemble_init_for_target): Handle ppc init.
 227         * ppc-dis.c (private): New var.
 228         (powerpc_init_dialect): Don't return calloc failure, instead use
 229         private.
 230         (PPC_OPCD_SEGS, PPC_OP_TO_SEG): Define.
 231         (powerpc_opcd_indices): New array.
 232         (disassemble_init_powerpc): New function.
 233         (print_insn_big_powerpc): Don't init dialect here.
 234         (print_insn_little_powerpc): Likewise.
 235         (print_insn_powerpc): Start search using powerpc_opcd_indices.
 236
 237 2012-03-10  Edmar Wienskoski  <edmar@freescale.com>
 238
 239         * ppc-dis.c (ppc_opts): Add entries for "e5500" and "e6500".
 240         * ppc-opc.c (insert_ls, TMR, ESYNC, XSYNCLE_MASK): New.
 241         (PPCVEC2, PPCTMR, E6500): New short names.
 242         (powerpc_opcodes): Add vabsdub, vabsduh, vabsduw, dni, mvidsplt,
 243         mviwsplt, icblq., mftmr, mttmr, dcblq., miso, lvexbx, lvexhx,
 244         lvexwx, stvexbx, stvexhx, stvexwx, lvepx, lvepxl, stvepx, stvepxl,
 245         lvtrx, lvtrxl, lvtlx, lvtlxl, stvfrx, stvfrxl, stvflx, stvflxl,
 246         lvswx, lvswxl, stvswx, stvswxl, lvsm mnemonics. Accept LS, ESYNC
 247         optional operands on sync instruction for E6500 target.
 248
 249 2012-03-08  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
 250
 251         * s390-opc.txt: Set instruction type of pku to SS_L2RDRD.
 252
 253 2012-02-27  Alan Modra  <amodra@gmail.com>
 254
 255         * mt-dis.c: Regenerate.
 256
 257 2012-02-27  Alan Modra  <amodra@gmail.com>
 258
 259         * v850-opc.c (extract_v8): Rearrange to make it obvious this
 260         is the inverse of corresponding insert function.
 261         (extract_d22, extract_u9, extract_r4): Likewise.
 262         (extract_d9): Correct sign extension.
 263         (extract_d16_15): Don't assume "long" is 32 bits, and don't
 264         rely on implementation defined behaviour for shift right of
 265         signed types.
 266         (extract_d16_16, extract_d17_16, extract_i9): Likewise.
 267         (extract_d23): Likewise, and correct mask.
 268
 269 2012-02-27  Alan Modra  <amodra@gmail.com>
 270
 271         * crx-dis.c (print_arg): Mask constant to 32 bits.
 272         * crx-opc.c (cst4_map): Use int array.
 273
 274 2012-02-27  Alan Modra  <amodra@gmail.com>
 275
 276         * arc-dis.c (BITS): Don't use shifts to mask off bits.
 277         (FIELDD): Sign extend with xor,sub.
 278
 279 2012-02-25  Walter Lee  <walt@tilera.com>
 280
 281         * tilegx-opc.c: Handle TILEGX_OPC_LD4S_TLS and TILEGX_OPC_LD_TLS.
 282         * tilepro-opc.c: Handle TILEPRO_OPC_LW_TLS and
 283         TILEPRO_OPC_LW_TLS_SN.
 284
 285 2012-02-21  H.J. Lu  <hongjiu.lu@intel.com>
 286
 287         * i386-opc.h (HLEPrefixNone): New.
 288         (HLEPrefixLock): Likewise.
 289         (HLEPrefixAny): Likewise.
 290         (HLEPrefixRelease): Likewise.
 291
 292 2012-02-08  H.J. Lu  <hongjiu.lu@intel.com>
 293
 294         * i386-dis.c (HLE_Fixup1): New.
 295         (HLE_Fixup2): Likewise.
 296         (HLE_Fixup3): Likewise.
 297         (Ebh1): Likewise.
 298         (Evh1): Likewise.
 299         (Ebh2): Likewise.
 300         (Evh2): Likewise.
 301         (Ebh3): Likewise.
 302         (Evh3): Likewise.
 303         (MOD_C6_REG_7): Likewise.
 304         (MOD_C7_REG_7): Likewise.
 305         (RM_C6_REG_7): Likewise.
 306         (RM_C7_REG_7): Likewise.
 307         (XACQUIRE_PREFIX): Likewise.
 308         (XRELEASE_PREFIX): Likewise.
 309         (dis386): Use Ebh1/Evh1 on add, adc, and, btc, btr, bts,
 310         cmpxchg, dec, inc, neg, not, or, sbb, sub, xor and xadd. Use
 311         Ebh2/Evh2 on xchg.  Use Ebh3/Evh3 on mov.
 312         (reg_table): Use Ebh1/Evh1 on add, adc, and, dec, inc, neg,
 313         not, or, sbb, sub and xor.  Use Ebh3/Evh3 on mov.  Use
 314         MOD_C6_REG_7 and MOD_C7_REG_7.
 315         (mod_table): Add MOD_C6_REG_7 and MOD_C7_REG_7.
 316         (rm_table): Add RM_C6_REG_7 and RM_C7_REG_7.  Add xend and
 317         xtest.
 318         (prefix_name): Handle XACQUIRE_PREFIX and XRELEASE_PREFIX.
 319         (CMPXCHG8B_Fixup): Handle HLE prefix on cmpxchg8b.
 320
 321         * i386-gen.c (cpu_flag_init): Add CPU_HLE_FLAGS and
 322         CPU_RTM_FLAGS.
 323         (cpu_flags): Add CpuHLE and CpuRTM.
 324         (opcode_modifiers): Add HLEPrefixOk.
 325
 326         * i386-opc.h (CpuHLE): New.
 327         (CpuRTM): Likewise.
 328         (HLEPrefixOk): Likewise.
 329         (i386_cpu_flags): Add cpuhle and cpurtm.
 330         (i386_opcode_modifier): Add hleprefixok.
 331
 332         * i386-opc.tbl: Add HLEPrefixOk=3 to mov.  Add HLEPrefixOk to
 333         add, adc, and, btc, btr, bts, cmpxchg, dec, inc, neg, not, or,
 334         sbb, sub, xor and xadd.  Add HLEPrefixOk=2 to xchg with memory
 335         operand.  Add xacquire, xrelease, xabort, xbegin, xend and
 336         xtest.
 337         * i386-init.h: Regenerated.
 338         * i386-tbl.h: Likewise.
 339
 340 2012-01-24  DJ Delorie  <dj@redhat.com>
 341
 342         * rl78-decode.opc (rl78_decode_opcode): Add NOT1.
 343         * rl78-decode.c: Regenerate.
 344
 345 2012-01-17  James Murray  <jsm@jsm-net.demon.co.uk>
 346
 347         PR binutils/10173
 348         * cr16-dis.c (print_arg): Test symtab_size not num_symbols.
 349
 350 2012-01-17  Andreas Schwab  <schwab@linux-m68k.org>
 351
 352         * m68k-opc.c (m68k_opcodes): Fix entries for pmove with BADx/BACx
 353         register and move them after pmove with PSR/PCSR register.
 354
 355 2012-01-13  H.J. Lu  <hongjiu.lu@intel.com>
 356
 357         * i386-dis.c (mod_table): Add vmfunc.
 358
 359         * i386-gen.c (cpu_flag_init): Add CPU_VMFUNC_FLAGS.
 360         (cpu_flags): CpuVMFUNC.
 361
 362         * i386-opc.h (CpuVMFUNC): New.
 363         (i386_cpu_flags): Add cpuvmfunc.
 364
 365         * i386-opc.tbl: Add vmfunc.
 366         * i386-init.h: Regenerated.
 367         * i386-tbl.h: Likewise.
 368
 369 For older changes see ChangeLog-2011
 370 \f
 371 Local Variables:
 372 mode: change-log
 373 left-margin: 8
 374 fill-column: 74
 375 version-control: never
 376 End: