1 2000-02-14 Fernando Nasser <fnasser@totem.to.cygnus.com>
3 * arm-dis.c: Change flavor name from atpcs-special to
4 special-atpcs to prevent name conflict in gdb.
5 (get_arm_regname_num_options, set_arm_regname_option,
6 get_arm_regnames): New functions. API to access the several
7 flavor of register names. Note: Used by gdb.
8 (print_insn_thumb): Use the register name entry from the currently
9 selected flavor for LR and PC.
11 2000-02-10 Nick Clifton <nickc@cygnus.com>
13 * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
15 (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
16 "mulsh.h" instructions.
17 * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
19 (print_insn_mcore): Add support for little endian targets.
20 Add support for MULSH and OPSR classes.
22 2000-02-07 Nick Clifton <nickc@cygnus.com>
24 * arm-dis.c (parse_arm_diassembler_option): Rename again.
25 Previous delat did not take.
27 2000-02-03 Timothy Wall <twall@redhat.com>
29 * dis-buf.c (buffer_read_memory): Use octets_per_byte field
30 to adjust target address bounds checking and calculate the
31 appropriate octet offset into data.
33 2000-01-27 Nick Clifton <nickc@redhat.com>
35 * arm-dis.c: (parse_disassembler_option): Rename to
36 parse_arm_disassembler_option and allow to be exported.
38 * disassemble.c (disassembler_usage): New function: Print out any
39 target specific disassembler options.
40 Call arm_disassembler_options() if the ARM architecture is being
43 * arm-dis.c (NUM_ELEM): Define this macro if not already
45 (arm_regname): New struct type for ARM register names.
46 (arm_toggle_regnames): Delete.
47 (parse_disassembler_option): Use register name structure.
48 (print_insn): New function: Combines duplicate code found in
49 print_insn_big_arm and print_insn_little_arm.
50 (print_insn_big_arm): Call print_insn.
51 (print_insn_little_arm): Call print_insn.
52 (print_arm_disassembler_options): Display list of supported,
53 ARM specific disassembler options.
55 2000-01-27 Thomas de Lellis <tdel@windriver.com>
57 * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
58 ARM_STT_16BIT flag as Thumb code symbols.
60 * arm-dis.c (printf_insn_little_arm): Ditto.
62 2000-01-25 Thomas de Lellis <tdel@windriver.com>
64 * arm-dis.c (printf_insn_thumb): Prevent double dumping
65 of raw thumb instructions.
67 2000-01-20 Nick Clifton <nickc@cygnus.com>
69 * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
71 2000-01-03 Nick Clifton <nickc@cygnus.com>
73 * arm-dis.c (streq): New macro.
75 (force_thumb): ew local variable.
76 (parse_disassembler_option): New function: Parse a single, ARM
77 specific disassembler command line switch.
78 (parse_disassembler_option): Call parse_disassembler_option to
79 parse individual command line switches.
80 (print_insn_big_arm): Check force_thumb.
81 (print_insn_little_arm): Check force_thumb.
83 1999-12-27 Alan Modra <alan@spri.levels.unisa.edu.au>
85 * i386-dis.c (grps[]): Correct GRP5 FF/3 from "call" to "lcall".
87 Wed Dec 1 03:34:53 1999 Jeffrey A Law (law@cygnus.com)
89 * m10300-opc.c, m10300-dis.c: Add am33 support.
91 Wed Nov 24 20:29:58 1999 Jeffrey A Law (law@cygnus.com)
93 * hppa-dis.c (unit_cond_names): Add PA2.0 unit condition names.
94 (print_insn_hppa): Handle 'B' operand.
96 1999-11-22 Nick Clifton <nickc@cygnus.com>
98 * d10v-opc.c: Fix pattern for "cpfg,f{0|1},c" instruction.
100 1999-11-18 Gavin Romig-Koch <gavin@cygnus.com>
102 * mips-opc.c (I5): New.
103 (abs.ps,add.ps,alnv.ps,c.COND.ps,cvt.s.pl,cvt.s.pu,cvt.ps.s
104 madd.ps,movf.ps,movt.ps,mul.ps,net.ps,nmadd.ps,nmsub.ps,
105 pll.ps,plu.ps,pul.ps,puu.ps,sub.ps,suxc1,luxc1): New.
107 Mon Nov 15 19:34:58 1999 Donald Lindsay <dlindsay@cygnus.com>
109 * arm-dis.c (print_insn_arm): Added general purpose 'X' format.
110 * arm-opc.h (print_insn_arm): Added comment documenting
111 the 'X' format just added to arm-dis.c.
113 1999-11-15 Gavin Romig-Koch <gavin@cygnus.com>
115 * mips-opc.c (la): Create a version that just uses addiu directly.
116 (dla): Expand to daddiu if possible.
118 1999-11-11 Nick Clifton <nickc@cygnus.com>
120 * mips-opc.c: Add ssnop pattern.
122 1999-11-01 Gavin Romig-Koch <gavin@cygnus.com>
124 * mips-dis.c (_print_insn_mips): Use OPCODE_IS_MEMBER.
126 1999-10-29 Nick Clifton <nickc@cygnus.com>
128 * d30v-opc.c (mvtacc): Use format SHORT_AR not SHORT_AA
129 (d30v_format_tab): Define the SHORT_AR format.
131 1999-10-28 Nick Clifton <nickc@cygnus.com>
133 * mcore-dis.c: Remove spurious code introduced in previous delta.
135 1999-10-27 Scott Bambrough <scottb@netwinder.org>
137 * arm-dis.c: Include sysdep.h to prevent compile time warnings.
139 1999-10-18 Michael Meissner <meissner@cygnus.com>
141 * alpha-opc.c (alpha_operands): Fill in missing initializer.
142 (alpha_num_operands): Convert to unsigned.
143 (alpha_num_opcodes): Ditto.
144 (insert_rba): Declare unused arguments ATTRIBUTE_UNUSED.
149 (extract_bdisp): Ditto.
150 (extract_jhint): Ditto.
151 (extract_ev6hwjhint): Ditto.
153 Sun Oct 10 01:48:01 1999 Jerry Quinn <jerry.quinn.adv91@alum.dartmouth.org>
155 * hppa-dis.c (print_insn_hppa): Add new codes 'cc', 'cd', 'cC',
158 * hppa-dis.c (print_insn_hppa): Removed unused args. Fix '?W'.
160 * hppa-dis.c (print_insn_hppa): Implement codes "?N", "?Q".
162 Thu Oct 7 00:12:43 MDT 1999 Diego Novillo <dnovillo@cygnus.com>
164 * d10v-opc.c (d10v_operands): Add RESTRICTED_NUM3 flag for
165 rac/rachi instructions.
166 (d10v_opcodes): Added seven new instructions ld, ld2w, sac, sachi,
169 1999-10-04 Doug Evans <devans@casey.cygnus.com>
171 * fr30-asm.c,fr30-desc.h: Rebuild.
172 * m32r-asm.c,m32r-desc.c,m32r-desc.h: Rebuild. Add m32rx support.
173 * m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h,m32r-opinst.c: Ditto.
175 1999-09-29 Nick Clifton <nickc@cygnus.com>
177 * sh-opc.h: Fix bit patterns for several load and store
180 Thu Sep 23 08:27:20 1999 Jerry Quinn <jerry.quinn.adv91@alum.dartmouth.org
182 * hppa-dis.c (print_insn_hppa): Replace 'B', 'M', 'g' and 'l' with
183 cleaner code using completer prefixes. Add 'Y'.
185 Sun Sep 19 10:41:27 1999 Jeffrey A Law (law@cygnus.com)
187 * hppa-dis.c: (print_insn_hppa): Correct 'cJ', 'cc'.
189 * hppa-dis.c (extract_22): New function.
191 * hppa-dis.c (print_insn_hppa): Handle 'J', 'K', and 'cc'.
193 * hppa-dis.c (print_insn_hppa): Handle 'fe' and 'cJ'.
195 * hppa-dis.c (print_insn_hppa): Handle '#', 'd', and 'cq'.
197 * hppa-dis.c (print_insn_hppa): Handle 'm', 'h', '='.
199 * hppa-dis.c (print_insn_hppa): Handle 'X' operand.
201 * hppa-dis.c (print_insn_hppa): Handle 'B' operand.
203 * hppa-dis.c (print_insn_hppa): Handle 'M' and 'L' operands.
205 * hppa-dis.c (print_insn_hppa): Handle 'l' operand.
207 * hppa-dis.c (print_insn_hppa): Handle 'g' operand.
209 Sat Sep 18 11:36:12 1999 Jeffrey A Law (law@cygnus.com)
211 * hppa-dis.c (print_insn_hppa): Output a space after 'X' completer.
213 * hppa-dis.c: (print_insn_hppa): Do output a space before a 'v'
216 * hppa-dis.c: (print_insn_hppa): Handle 'fX'.
218 * hppa-dis.c: (print_insn_hppa): Add missing break after
221 * hppa-dis.c: Finish constifying various completers, register
224 1999-09-14 Michael Meissner <meissner@cygnus.com>
226 * configure.in (Canonicalization of target names): Remove adding
227 ${CONFIG_SHELL} in front of $ac_config_sub, since autoconfig 2.14
228 generates $ac_config_sub with a ${CONFIG_SHELL} already.
229 * configure: Regenerate.
231 Tue Sep 7 13:50:32 1999 Jeffrey A Law (law@cygnus.com)
233 * hppa-dis.c (print_insn_hppa): Escape '%' in output strings.
235 * hppa-dis.c (print_insn_hppa): Handle 'Z' argument.
237 1999-09-07 Nick Clifton <nickc@cygnus.com>
239 * sh-opc.h: Add mulu.w and muls.w patterns. These are the correct
240 names for the mulu and muls patterns.
242 1999-09-04 Steve Chamberlain <sac@pobox.com>
244 * pj-opc.c: New file.
245 * pj-dis.c: New file.
246 * disassemble.c (disassembler): Handle bfd_arch_pj.
247 * configure.in: Handle bfd_pj_arch.
248 * Makefile.am: Rebuild dependencies.
249 (CFILES): Add pj-dis.c and pj-opc.c.
250 (ALL_MACHINES): Add pj-dis.lo and pj-opc.lo.
251 * configure, Makefile.in: Rebuild.
253 1999-09-04 H.J. Lu <hjl@gnu.org>
255 * i386-dis.c (print_insn_i386): Set bytes_per_line to 7.
257 Mon Aug 30 18:56:14 1999 Richard Henderson <rth@cygnus.com>
259 * alpha-opc.c (fetch, fetch_m, ecb, wh64): RA must be R31.
261 1999-08-04 Doug Evans <devans@casey.cygnus.com>
263 * fr30-asm.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
264 * m32r-asm.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
265 * m32r-opinst.c: Rebuild.
267 Sat Aug 28 00:27:24 1999 Jerry Quinn <jquinn@nortelnetworks.com>
269 * hppa-dis.c (print_insn_hppa): Replace 'f' by 'v'. Prefix float
270 register args by 'f'.
272 * hppa-dis.c (print_insn_hppa): Add args q, %, !, and |.
274 * hppa-dis.c (MASK_10, read_write_names, add_compl_names,
275 extract_10U_store): New.
276 (print_insn_hppa): Add new completers.
278 * hppa-dis.c (signed_unsigned_names,mix_half_names,
279 saturation_names): New.
280 (print_insn_hppa): Add completer codes 'a', 'ch', 'cH', 'cS', and 'c*'.
282 * hppa-dis.c (print_insn_hppa): Place completers behind prefix 'c'.
284 * hppa-dis.c (print_insn_hppa): Add cases for '.', '~'. '$'. and '!'
286 * hppa-dis.c (print_insn_hppa): Look at next arg instead of bits
287 to decide to print a space.
289 1999-08-21 Alan Modra <alan@spri.levels.unisa.edu.au>
291 * i386-dis.c: Add AMD athlon instruction support.
293 1999-08-10 Ian Lance Taylor <ian@zembu.com>
295 From Wally Iimura <iimura@microunity.com>:
296 * dis-buf.c (buffer_read_memory): Rewrite expression to avoid
297 overflow at end of address space.
298 (generic_print_address): Use sprintf_vma.
300 1999-08-08 Ian Lance Taylor <ian@zembu.com>
302 * Makefile.am: Rename .dep* files to DEP*. Change DEP variable to
303 MKDEP. Rebuild dependencies.
304 * Makefile.in: Rebuild.
306 Fri Aug 6 09:46:35 1999 Jerry Quinn <jquinn@nortelnetworks.com>
308 * hppa-dis.c (compare_cond_64_names, cmpib_cond_64_names,
309 add_cond_64_names, wide_add_cond_names, logical_cond_64_names,
310 unit_cond_64_names, shift_cond_64_names, bb_cond_64_names): New.
311 (print_insn_hppa): Add 64 bit condition completers.
313 Thu Aug 5 16:59:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
315 * hppa-dis.c (print_insn_hppa): Change condition args to use
318 Wed Jul 28 04:33:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
320 * hppa-dis.c (print_insn_hppa): Remove unnecessary test in 'E'
323 1999-07-21 Ian Lance Taylor <ian@zembu.com>
326 * configure.bat: Remove; obsolete.
328 1999-07-11 Ian Lance Taylor <ian@zembu.com>
330 * dis-buf.c: Add ATTRIBUTE_UNUSED as appropriate.
331 (generic_strcat_address): Add cast to avoid warning.
332 * i386-dis.c: Initialize all structure fields to avoid warnings.
333 Add ATTRIBUTE_UNUSED as appropriate.
335 1999-07-08 Jakub Jelinek <jj@ultra.linux.cz>
337 * sparc-dis.c (print_insn_sparc): Differentiate between
338 addition and oring when guessing symbol for comment.
340 1999-07-05 Nick Clifton <nickc@cygnus.com>
342 * arm-dis.c (print_insn_arm): Display hex equivalent of rotated
345 1999-06-23 Alan Modra <alan@spri.levels.unisa.edu.au>
347 * i386-dis.c: Mention intel mode specials in macro char comment.
349 1999-06-21 Ian Lance Taylor <ian@zembu.com>
351 * alpha-dis.c: Don't include <stdlib.h>.
352 * arm-dis.c: Include "sysdep.h".
353 * tic30-dis.c: Don't include <stdlib.h> or <string.h>. Include
355 * Makefile.am: Rebuild dependencies.
356 * Makefile.in: Rebuild.
358 1999-06-16 Nick Clifton <nickc@cygnus.com>
360 * arm-dis.c (print_insn_arm): Add detection of IMB and IMBRange
363 1999-06-14 Nick Clifton <nickc@cygnus.com> & Drew Mosley <dmoseley@cygnus.com>
365 * arm-dis.c (arm_regnames): Turn into a pointer to a register
367 (arm_regnames_standard): New variable: Array of ARM register
368 names according to ARM instruction set nomenclature.
369 (arm_regnames_apcs): New variable: Array of ARM register names
370 according to ARM Procedure Call Standard.
371 (arm_regnames_raw): New variable: Array of ARM register names
372 using just 'r' and the register number.
373 (arm_toggle_regnames): New function: Toggle the chosen register set
375 (parse_disassembler_options): New function: Parse any target
376 disassembler command line options.
377 (print_insn_big_arm): Call parse_disassembler_options if any
379 (print_insn_little_arm): Call parse_disassembler_options if any
382 1999-06-13 Ian Lance Taylor <ian@zembu.com>
384 * i386-dis.c (FWAIT_OPCODE): Define.
385 (used_prefixes): New static variable.
386 (fetch_data): Don't print an error message if we have already
387 fetched some bytes successfully.
388 (ckprefix): Clear used_prefixes. Use FWAIT_OPCODE, not 0x9b.
389 (prefix_name): New static function.
390 (print_insn_i386): If setjmp fails, indicating a data error, but
391 we have managed to fetch some bytes, print the first one as a
392 prefix or a .byte pseudo-op. If fwait is followed by a non
393 floating point instruction, print the first prefix. Set
394 used_prefixes when prefixes are used. If any prefixes were not
395 used after disassembling the instruction, print the first prefix
396 instead of printing the instruction.
397 (putop): Set used_prefixes when prefixes are used.
398 (append_seg, OP_E, OP_G, OP_REG, OP_I, OP_sI, OP_J): Likewise.
399 (OP_DIR, OP_SIMD_Suffix): Likewise.
401 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
403 * sparc-opc.c: Fix up set, setsw, setuw operand kinds.
404 Support signx %reg, clruw %reg.
406 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
408 * sparc-opc.c: Add aliases Solaris as supports.
410 Mon Jun 7 12:04:52 1999 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
412 * Makefile.am (CFILES): Add arc-{dis,opc}.c and v850-{dis,opc}.c.
413 * Makefile.in: Regenerated.
415 1999-06-03 Philip Blundell <philb@gnu.org>
417 * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
418 when target is PC-relative.
420 1999-05-28 Linus Nordberg <linus.nordberg@canit.se>
422 * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC. Add MACM/MSACM. Add
425 * m68k-dis.c (fetch_arg): Add places `n', `o'.
427 * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
428 Add mcf5206e to appropriate instructions.
429 Add alias for MAC, MSAC.
431 * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
434 * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
435 macw, remsl, remul for mcf5307. Change mcf5200 --> mcf.
437 * m68k-dis.c: Add format `u' and places `h', `m', `M'.
439 1999-05-18 Alan Modra <alan@spri.levels.unisa.edu.au>
441 * i386-dis.c (Ed): Define.
442 (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
444 (OP_rm): Rename to OP_Rd.
447 (putop): Add const to template and p.
448 (print_insn_x86): Delete.
449 (print_insn_i386): Merge old function print_insn_x86. Add const
451 (struct dis386): Add const to name.
452 (dis386_att, dis386_intel): Add const.
453 (dis386_twobyte_att, dis386_twobyte_intel): Add const.
454 (names32, names16, names8, names_seg, index16): Add const.
455 (grps, prefix_user_table, float_reg): Add const.
456 (float_mem_att, float_mem_intel): Add const.
457 (oappend): Add const to s.
458 (OP_REG): Add const to s.
459 (ptr_reg): Add const to s.
460 (dofloat): Add const to dp.
461 (OP_C): Don't skip modrm, it's now done in OP_Rd.
464 (OP_Rd): Check for valid mod. Call Op_E to print.
465 (OP_E): Handle d_mode arg. Check for bad sfence,lea,lds etc.
466 (OP_MS): Check for valid mod. Call Op_EM to print.
467 (OP_3DNowSuffix): Set obufp and use oappend rather than
468 strcat. Call BadOp() for errors.
469 (OP_SIMD_Suffix): Likewise.
470 (BadOp): New function.
472 1999-05-12 Alan Modra <alan@spri.levels.unisa.edu.au>
474 * i386-dis.c (dis386_intel): Remove macro chars, except for
475 jEcxz. Change cWtR and cRtd to cW and cR.
476 (dis386_twobyte_intel): Remove macro chars here too.
477 (putop): Handle R and W macros for intel mode.
479 * i386-dis.c (SIMD_Fixup): New function.
480 (dis386_twobyte_att): Use it on movlps and movhps, and change
481 Ev to EX on these insns. Change movmskps Ev, XM to Gv, EX.
482 (dis386_twobyte_intel): Same here.
484 * i386-dis.c (Av): Remove.
488 (OP_SIMD_Suffix): New function.
489 (OP_DIR): Remove dead code.
490 (eAX_reg..eDI_reg): Renumber.
491 (onebyte_has_modrm): Table numbering comments.
492 (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
493 (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
494 checks. Print error on invalid dp->bytemode2. Remove simd_cmp,
495 and handle SIMD cmp insns in OP_SIMD_Suffix.
496 (info->bytes_per_line): Bump from 5 to 6.
498 (OP_E): Use INTERNAL_DISASSEMBLER_ERROR. Handle sfence.
499 (OP_3DNowSuffix): Ensure mnemonic index unsigned.
501 PIII SIMD support from Doug Ledford <dledford@redhat.com>
502 * i386-dis.c (XM, EX, None): Define.
503 (OP_XMM, OP_EX, OP_None): New functions.
504 (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
505 (GRP14): Rename to GRPAMD.
506 (GRP*): Add USE_GROUPS flag.
508 (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
509 (twobyte_has_modrm): Add SIMD entries.
510 (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
511 (grps): Add SIMD insns.
512 (print_insn_x86): New vars uses_f3_prefix and simd_cmp. Don't
513 oappend repz if uses_f3_prefix. Add code to handle new groups for
516 From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
517 * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
518 operand from Av to Jv.
520 1999-05-07 Nick Clifton <nickc@cygnus.com>
522 * mcore-dis.c (print_insn_mcore): Use .short to display
523 unidentified instructions, not .word.
525 1999-04-26 Tom Tromey <tromey@cygnus.com>
527 * aclocal.m4, configure: Updated for new version of libtool.
529 1999-04-14 Doug Evans <devans@casey.cygnus.com>
531 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
532 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
534 Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
536 * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
539 1999-04-10 Doug Evans <devans@casey.cygnus.com>
541 * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
542 * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
544 1999-04-06 Ian Lance Taylor <ian@zembu.com>
546 * opintl.h (LC_MESSAGES): Never define.
548 1999-04-04 Ian Lance Taylor <ian@zembu.com>
550 * i386-dis.c (intel_syntax, open_char, close_char): Make static.
551 (separator_char, scale_char): Likewise.
552 (print_insn_x86): Likewise.
553 (print_insn_i386): Likewise. Add declaration.
555 1999-03-26 Doug Evans <devans@casey.cygnus.com>
557 * fr30-dis.c: Rebuild.
558 * m32r-dis.c: Rebuild.
560 1999-03-23 Ian Lance Taylor <ian@zembu.com>
562 * m68k-opc.c: Change compare instructions to use "@s" rather than
563 ";s" when used with an immediate operand.
565 1999-03-22 Doug Evans <devans@casey.cygnus.com>
567 * cgen-opc.c (cgen_set_cpu): Delete.
568 (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
569 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
571 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
573 * po/opcodes.pot: Rebuild.
575 1999-03-16 Martin Hunt <hunt@cygnus.com>
577 * d30v-opc.c (mvtsys): Remove FLAG_LKR.
579 1999-03-11 Doug Evans <devans@casey.cygnus.com>
581 * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
582 (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
583 (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
584 * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
585 * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
586 * m32r-opinst.c: Rebuild.
588 1999-02-25 Doug Evans <devans@casey.cygnus.com>
590 * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
591 (cgen_hw_lookup_by_num): Rewrite.
592 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
593 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
594 * m32r-opinst.c: Rebuild.
596 Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
598 * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
599 (insert_jhint): Fix insertion mask.
600 * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
602 1999-02-10 Doug Evans <devans@casey.cygnus.com>
604 * Makefile.in: Rebuild.
606 1999-02-09 Doug Evans <devans@casey.cygnus.com>
608 * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
609 * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
610 * Makefile.am: Remove references to them.
611 (HFILES): Add fr30-desc.h,m32r-desc.h.
612 (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
614 (ALL_MACHINES): Update.
615 * configure.in: Redo handling of cgen_files.
616 (bfd_i960_arch): Delete i960c-*.lo files.
617 * configure: Regenerate.
618 * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
619 (hash_insn_array): Rewrite.
620 * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
621 (hash_insn_array): Rewrite.
622 * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
623 (cgen_lookup_insn,cgen_get_insn_operands): Define here.
624 (cgen_lookup_get_insn_operands): Ditto.
625 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
626 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
627 * po/POTFILES.in: Rebuild.
628 * po/opcodes.pot: Rebuild.
630 Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
632 * Makefile.am: Rebuild dependencies.
633 (HFILES): Add fr30-opc.h.
634 (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
635 * Makefile.in: Rebuild.
637 * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
638 Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
640 * acconfig.h: Remove.
641 * configure: Rebuild with current autoconf/automake.
642 * aclocal.m4: Likewise.
643 * config.in: Likewise.
644 * Makefile.in: Likewise.
646 Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
648 * m68k-opc.c: Correct move (not movew) to status word on 5200.
650 Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
652 * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
653 * i386-dis.c (x_mode): Define.
657 (dis386_twobyte): Remove.
658 (dis386_twobyte_att): New.
659 (dis386_twobyte_intel): New.
660 (print_insn_x86): Use new arrays.
662 (float_mem_intel): New.
663 (float_mem_att): New.
664 (dofloat): Use new float_mem arrays.
665 (print_insn_i386_att): New.
666 (print_insn_i386_intel): New.
667 (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
668 (putop): Handle intel syntax.
669 (OP_indirE): Handle intel syntax.
670 (OP_E): Handle intel syntax.
671 (OP_I): Handle intel syntax.
672 (OP_sI): Handle intel syntax.
673 (OP_OFF): Handle intel syntax.
677 1999-01-27 Doug Evans <devans@casey.cygnus.com>
679 * fr30-opc.h,fr30-opc.c: Rebuild.
680 * i960c-opc.h,i960c-opc.c: Rebuild.
681 * m32r-opc.c: Rebuild.
683 Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
685 * hppa-dis.c: revert HP merge changes until HP gives us
688 1999-01-19 Nick Clifton <nickc@cygnus.com>
690 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
691 offsets as well as symbloic address.
693 Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
695 * hppa-dis.c: fix comments and some indentation.
697 1999-01-12 Doug Evans <devans@casey.cygnus.com>
699 * fr30-opc.c,i960c-opc.c: Regenerate.
701 1999-01-11 Doug Evans <devans@casey.cygnus.com>
703 * fr30-opc.c: Regenerate.
705 1999-01-06 Doug Evans <devans@casey.cygnus.com>
707 * m32r-dis.c: Regenerate.
709 1999-01-05 Doug Evans <devans@casey.cygnus.com>
711 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
712 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
713 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
715 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
717 * configure.in: Require autoconf 2.12.1 or higher.
719 1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
721 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
723 Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
725 * fr30-opc.c: Regenerated.
727 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
729 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
731 1998-12-15 Dave Brolley <brolley@cygnus.com>
733 * fr30-opc.c,fr30-opc.h: Regenerated.
735 1998-12-14 Dave Brolley <brolley@cygnus.com>
737 * fr30-opc.c,fr30-opc.h: Regenerated.
739 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
741 * fr30-opc.c,fr30-opc.h: Regenerated.
743 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
745 * m32r-opc.c: Regenerate.
747 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
749 * dis-buf.c (generic_strcat_address): reformat to GNU coding
750 conventions. change sprintf call to an sprintf_vma call.
752 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
754 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
756 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
758 The following changes were made by
759 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
760 David Taylor <taylor@texas.cygnus.com>, and
761 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
762 merge in changes by HP; HP did not create ChangeLog entries.
764 * dis-buf.c (generic_strcat_address): new function.
766 * hppa-dis.c: Changes to improve hppa disassembly.
767 Changed formatting in : reg_names, fp_reg_names,control_reg,
768 New variables : sign_extension_names, deposit_names, conversion_names
769 float_test_names, compare_cond_names_double, add_cond_names_double,
770 logical_cond_names_double, unit_cond_names_double,
771 branch_push_pop_names, saturation_names, shift_names, mix_names,
772 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
773 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
774 (fput_const): renamed as fput_hex_const
776 - use the macros fputs_filtered and
777 fput_decimal_const whenever possible; calls to sign_extend require
778 2 params -- add a missing second param of 0.
779 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
780 architecture version number of current machine. HP folks are
781 trying to handle situation where the target program was compiled
782 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
784 - added new cases : 'g', 'B', 'm'
785 - added cases specifically for PA 2.0
786 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
787 - calls to fput_const become calls to fput_hex_const
789 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
791 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
792 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
793 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
794 * Makefile.in: Rebuilt.
795 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
797 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
798 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
800 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
802 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
804 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
806 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
808 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
809 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
811 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
813 * fr30-opc.c: Regenerate.
815 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
817 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
819 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
821 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
823 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
825 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
827 1998-11-30 Doug Evans <devans@casey.cygnus.com>
829 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
830 CGEN_INSN_BASE_VALUE.
831 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
832 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
834 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
836 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
838 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
840 * fr30-asm.c,fr30-dis.c: Regenerated.
842 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
844 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
846 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
848 * fr30-opc.c: Regenerated.
850 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
852 * fr30-opc.c: Regenerated.
853 * fr30-opc.h: Regenerated.
854 * fr30-dis.c: Regenerated.
855 * fr30-asm.c: Regenerated.
857 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
859 * mips-opc.c (sync.p,sync.l): Swap insn values.
861 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
863 * fr30-opc.c: Regenerate.
865 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
867 * fr30-opc.c: Regenerated.
868 * fr30-opc.h: Regenerated.
870 1998-11-18 Doug Evans <devans@casey.cygnus.com>
872 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
873 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
875 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
877 * fr30-opc.c: Regenerated.
879 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
881 * fr30-opc.c: Regenerated.
882 * fr30-opc.h: Regenerated.
883 * fr30-dis.c: Regenerated.
884 * fr30-asm.c: Regenerated.
886 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
888 * po/opcodes.pot: Regenerated.
889 * fr30-opc.c: Regenerated.
890 * fr30-opc.h: Regenerated.
891 * fr30-dis.c: Regenerated.
892 * fr30-asm.c: Regenerated.
894 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
896 * disassemble.c (disassembler): Add support for FR30 target.
898 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
900 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
901 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
903 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
905 * po/opcodes.pot: Regenerate.
906 * po/POTFILES.in: Regenerate.
907 * fr30-opc.c: Regenerate.
908 * fr30-opc.h: Regenerate.
910 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
912 * m32r-asm.c: Regenerate.
914 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
916 * configure.in: Added case for bfd_fr30_arch.
917 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
918 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
919 (CLEANFILES): Added stamp-fr30.
921 * fr30-asm.c: New file.
922 * fr30-dis.c: New file.
923 * fr30-opc.c: New file.
924 * fr30-opc.h: New file.
925 * po/POTFILES.in: Regenerated
926 * po/opcodes.pot: Regenerated
928 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
930 * configure.in: detect cygwin* instead of cygwin32*
931 * configure: regenerate
933 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
935 * mips-opc.c (IS_M): Added.
937 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
939 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
941 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
943 * m32r-opc.h,m32r-opc.c: Regenerate.
945 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
947 * i386-dis.c (OP_3DNowSuffix): New static function.
950 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
951 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
952 (insn_codep): New static variable.
953 (print_insn_x86): Init insn_codep after prefixes.
954 (grps): Add GRP14 entries for prefetch, prefetchw.
957 From Jeff B Epler <jepler@usgs.gov>
958 * i386-dis.c (Suffix3DNow): New table.
960 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
962 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
964 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
966 * d10v-dis.c (print_operand): If num is nonzero, then
967 add OPERAND_ACC1, not OPERAND_ACC0.
969 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
971 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
974 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
976 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
979 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
981 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
983 1998-09-09 Michael Meissner <meissner@cygnus.com>
985 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
988 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
990 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
992 (print_insn_little_arm): Detect Thumb symbols in elf object
995 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
997 * alpha-dis.c (print_insn_alpha): Use the machine type to
998 decide which PALcode set to include.
1000 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
1002 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
1004 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
1006 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
1007 MSUB and MSUBS instructions.
1009 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
1011 * ppc-opc.c (powerpc_operands): Omit parens around additions in
1012 operand name macros.
1014 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
1016 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
1017 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
1018 +, -, and d for ColdFire.
1020 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
1021 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
1022 (extract_mbe): Likewise.
1024 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
1026 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
1028 * m10300-opc.c: First cut at UDF instructions.
1030 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
1032 * m32r-opc.c: Regenerate (remove semantic descriptions).
1034 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
1036 * arm-dis.c (print_insn_big_arm): Fix indentation.
1037 (print_insn_little_arm): Likewise.
1039 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
1041 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
1043 (print_insn_little_arm): Likewise.
1045 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
1047 Move all global state data into opcode table struct, and treat
1048 opcode table as something that is "opened/closed".
1049 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
1050 (cgen_asm_init): Delete.
1051 (cgen_set_parse_operand_fn): New function.
1052 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
1053 (cgen_dis_init): Delete.
1054 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
1055 (cgen_current_{opcode_table_mach,endian}): Delete.
1056 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
1058 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
1060 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
1063 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
1065 * m10300-opc.c: Add entries for "no_match_operands" field in
1068 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
1070 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
1072 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
1074 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1076 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1078 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
1080 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
1082 (OP_J): Remove unnecessary subtraction when 16-bit displacement
1083 will be masked later.
1085 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
1087 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
1089 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
1091 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
1093 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
1095 * m10300-dis.c: Only recognize instructions from the currently
1097 * m10300-opc.c: Add field indicating the particular variant of
1098 the mn10300 each instruction is available on.
1100 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
1102 * configure.in: For bfd_vax_arch, build vax-dis.lo.
1103 * Makefile.am: Rebuild dependencies.
1104 (CFILES): Add vax-dis.c.
1105 (ALL_MACHINES): Add vax-dis.lo.
1106 * aclocal.m4: Rebuild with current libtool.
1107 * configure, Makefile.in: Rebuild.
1109 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
1111 * vax-dis.c: New file, from work by Pauline Middelink
1112 <middelin@polyware.iaf.nl>.
1113 * disassemble.c (ARCH_vax): Define if ARCH_all.
1114 (disassembler): Add case for ARCH_vax.
1115 * makefile.vms: Support compilation on vms/vax.
1117 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
1119 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
1120 related to sign extension and the size of ints.
1122 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
1124 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
1125 instructions. Support (sp) addressing mode by expanding it into
1128 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
1130 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
1132 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
1134 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
1136 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
1138 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
1141 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
1143 * mips-dis.c (print_insn_little_mips): Previously, instruction
1144 printing references the symbol table to determine whether the
1145 instruction resides in a block regular instructions or mips16
1146 instructions. However, when the disassembler gets used in other
1147 environments where the symbol table is not present, we no longer
1148 rely in the symbol table, rather, use the low bit of the
1149 instructions address to guess. There should be no change for usage
1150 of the disassembler in host based programs, gdb, objdump.
1151 (print_insn_big_mips): ditto.
1152 (print_insn_mips): ditto
1154 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
1156 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
1158 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
1160 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
1162 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1164 * i386-dis.c (index16): Add '%' to register names. Use ','
1167 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1169 * i386-dis.c: Don't print opcode suffix when we can figure out the
1170 size (and gas can!) by register operands, or from the default
1172 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
1174 (dis386, dis386_twobyte, grps): Use new suffix macros.
1175 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
1176 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
1177 order of cmps operands to agree with Intel docs. Correct operand
1178 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
1179 agree with Intel docs.
1180 (print_insn_x86): Print orphan fwait before other prefixes.
1181 Return correct byte count for orphan fwait with prefixes. Don't
1182 print `bound' operands in reverse order.
1183 (ckprefix): Stop accumulating prefixes if we get fwait.
1184 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
1186 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
1188 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
1189 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
1191 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1193 Fix problems when bfd_vma is wider than long.
1194 * i386-dis.c: Make op_address and start_pc unsigned.
1195 (set_op): Make parameter unsigned.
1196 (print_insn_x86): Cast to bfd_vma when passing a value to
1198 * ns32k-dis.c (CORE_ADDR): Don't define.
1199 (print_insn_ns32k): Change type of addr to bfd_vma. Use
1200 bfd_scan_vma to read back address.
1201 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
1203 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
1204 (NEXTULONG): New definition.
1205 (print_insn_m68k): Avoid overflow when computing third argument of
1207 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
1208 Use disp instead of val to store offset values.
1209 (print_indexed): Use base_disp instead of word to store base
1210 displacement, to avoid overflow.
1211 * m10300-dis.c (disassemble): Cast value to long when computing
1212 pc-relative address, to get correct sign extension.
1214 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
1216 * m32r-opc.c: Regenerate.
1218 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
1220 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
1221 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
1223 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
1225 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
1227 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1229 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
1231 (OP_DSreg): Rename from OP_DSSI.
1232 (OP_ESreg): Rename from OP_ESDI.
1233 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
1235 (append_seg): Rename from append_prefix.
1236 (ptr_reg): New function.
1237 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
1239 (PREFIX_ADDR): Rename from PREFIX_ADR.
1240 (float_reg): Add non-broken opcodes for people who don't want
1243 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1245 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
1248 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
1250 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
1252 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
1254 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
1255 0; produce error message for shifts of size 32 (or 64 for 64-bit
1256 shifts), because the hardware doesn't support them.
1258 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
1260 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
1261 LONG_2, LONG_2b formats to use this new operand.
1263 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
1265 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
1267 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
1269 * sparc-dis.c (print_insn_sparc): big endian instruction / little
1270 endian data support.
1272 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
1274 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
1275 and SHORT_B3b formats to use Rb instead of Ra.
1277 Add FLAG_MUL16 to MUL2XH opcode.
1279 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
1280 to existing 1.1.1 parallelisation prohibition procedure.
1282 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
1284 * m32r-asm.c,m32r-dis.c: Regenerate.
1286 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
1288 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
1289 with a shift count of 0.
1291 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
1293 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
1294 (cgen_hw_lookup_by_num): New function.
1296 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
1298 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
1300 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
1302 * sparc-dis.c (print_insn_sparc): Always fetch instructions
1303 as big-endian on SPARClite.
1305 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
1307 * d30v-opc.c (pre_defined_register): Remove alias for r0.
1309 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
1311 * po/Make-in (install-info): New target.
1313 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
1315 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
1316 * configure: Rebuild.
1318 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
1320 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
1321 variety of ISA2 instructions to set bottom ten bits of trap code.
1323 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
1325 * Makefile.am (config.status): Add explicit target so that
1326 config.status depends upon bfd/configure.in.
1327 * Makefile.in: Rebuild.
1329 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1331 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
1332 instructions to set bottom ten bits of break code.
1333 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
1334 for above optional argument.
1336 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
1338 * makefile.vms: Run dec c with /nodebug.
1340 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
1342 * Makefile.in: Rebuilt.
1343 * Makefile.am: Regenerated dependencies with mkdep.
1345 * opintl.h (_): Define as dgettext.
1347 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
1349 * cgen-asm.c: Internationalised.
1350 * m32r-asm.c: Internationalised.
1351 * m32r-dis.c: Internationalised.
1352 * m32r-opc.c: Internationalised.
1354 * aclocal.m4: Regenerated.
1355 * configure: Regenerated.
1356 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1357 * Makefile.in: Rebuild.
1358 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1359 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1361 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
1363 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
1365 * aclocal.m4, configure: Rebuild with current tools.
1367 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
1369 * opintl.h: New file - contains internationalisation macros used
1370 by source files in this directory.
1371 * po/: New subdirectory - contains internationalisation files.
1372 * po/Make-in: New file - Makefile constructor.
1373 * po/POTFILES.in: New file - list of files in opcodes directory
1374 that should be scan for internationalisation macros.
1375 * po/opcodes.pot: New file - list of internationisation strings
1376 found in files mentioned in po/POTFILES.in.
1377 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
1378 entry. Add intl directory to include paths.
1379 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1380 HAVE_STRCPY, HAVE_LC_MESSAGES
1381 * configure.in: Add rule to build Makefile in po subdirectory.
1382 * Makefile.in: Rebuilt.
1383 * aclocal.m4: Rebuilt.
1384 * config.in: Rebuilt.
1385 * configure: Rebuilt.
1386 * alpha-opc.c: Internationalised.
1387 * arc-dis.c: Internationalised.
1388 * arc-opc.c: Internationalised.
1389 * arm-dis.c: Internationalised.
1390 * cgen-asm.c: Internationalised.
1391 * d30v-dis.c: Internationalised.
1392 * dis-buf.c: Internationalised.
1393 * h8300-dis.c: Internationalised.
1394 * h8500-dis.c: Internationalised.
1395 * i386-dis.c: Internationalised.
1396 * m10200-dis.c: Internationalised.
1397 * m10300-dis.c: Internationalised.
1398 * m68k-dis.c: Internationalised.
1399 * m88k-dis.c: Internationalised.
1400 * mips-dis.c: Internationalised.
1401 * ns32k-dis.c: Internationalised.
1402 * opintl.h: Internationalised.
1403 * ppc-opc.c: Internationalised.
1404 * sparc-dis.c: Internationalised.
1405 * v850-dis.c: Internationalised.
1406 * v850-opc.c: Internationalised.
1408 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1410 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1411 (asm_hash_table_entries): New variable.
1412 (cgen_asm_init): Free asm_hash_table_entries.
1413 (hash_insn_array,hash_insn_list): New functions.
1414 (build_asm_hash_table): Use them. Hash macro insns as well.
1415 (cgen_asm_lookup_insn): Update.
1416 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1417 (dis_hash_table_entries): New variable.
1418 (cgen_dis_init): Free dis_hash_table_entries.
1419 (hash_insn_array,hash_insn_list): New functions.
1420 (build_dis_hash_table): Use them. Hash macro insns as well.
1421 (cgen_dis_lookup_insn): Update.
1422 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1423 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1424 (cgen_macro_insn_count): New function.
1425 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1427 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1429 * i386-dis.c (OP_DSSI): Print segment override.
1431 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1433 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1436 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1438 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1439 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1440 * configure.in: Define and substitute WIN32LDFLAGS and
1442 * aclocal.m4: Rebuild with new libtool.
1443 * configure, Makefile.in: Rebuild.
1445 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1447 * m32r-opc.c: Regenerate.
1449 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1451 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1452 before trying to copy it.
1453 * Makefile.in: Rebuild.
1455 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1457 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1459 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1461 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1462 from an arbitrary valid buffer instead of fetching them on demand
1464 (invalid_float): use bit_extract_simple() instead of bit_extract().
1466 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1468 From H.J. Lu <hjl@gnu.org>:
1469 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1472 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1474 * Branched binutils 2.9.
1476 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1478 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1479 disassembling last 4 bytes of a section.
1481 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1483 Fix some gcc -Wall warnings:
1484 * arc-dis.c (print_insn): Add casts to avoid warnings.
1485 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1486 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1487 * m10200-dis.c (disassemble): Likewise.
1488 * m10300-dis.c (disassemble): Likewise.
1489 * ns32k-dis.c (print_insn_ns32k): Likewise.
1490 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1491 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1492 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1493 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1494 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1495 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1496 * tic80-dis.c (print_one_instruction): Likewise.
1497 * w65-dis.c (print_operand): Likewise.
1498 * z8k-dis.c (fetch_data): Likewise.
1499 * a29k-dis.c: Add return type for find_byte_func_type.
1500 * arc-opc.c: Include <stdio.h>. Remove declarations of
1501 insert_multshift and extract_multshift.
1502 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1504 (extract_value): Fully parenthesize expression.
1505 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1506 * h8500-opc.h (h8500_table): Fully bracket initializer.
1507 * w65-opc.h (optable): Likewise.
1508 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1509 * i386-dis.c (OP_E): Initialize local variables.
1510 * m10200-dis.c (print_insn_mn10200): Likewise.
1511 * mips-dis.c (print_insn_mips16): Likewise.
1512 * sh-dis.c (print_insn_shx): Likewise.
1513 * v850-dis.c (print_insn_v850): Likewise.
1514 * ns32k-dis.c (print_insn_arg): Declare.
1515 (get_displacement, invalid_float): Declare.
1516 (list_search, sign_extend, flip_bytes): Declare return type.
1517 (get_displacement): Likewise.
1518 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1520 (print_insn_ns32k): Make i unsigned.
1521 (invalid_float): Make static. Declare type of val.
1522 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1523 on each for iteration.
1524 * tic30-dis.c (get_indirect_operand): Likewise.
1525 * z8k-dis.c (print_insn_z8001): Declare return type.
1526 (print_insn_z8002): Likewise.
1527 (unparse_instr): Fix sprintf format strings.
1529 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1531 * mips-opc.c: Add "sync.l" and "sync.p".
1533 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1535 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1536 default m68k variant to recognize.
1538 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1539 (ctrl, cobr, mem, ea): Likewise.
1540 (print_addr): Likewise. Remove cast.
1541 (ea): Cast argument of print_addr to bfd_vma.
1543 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1545 (cgen_parse_unsigned_integer): Likewise.
1546 (cgen_parse_address): Likewise.
1548 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1550 * i960-dis.c (ctrl): Add full braces to structure initialization.
1551 (cobr, mem, reg): Likewise.
1552 (ea): Correct parenthesization in expression.
1554 * cgen-asm.c: Include <ctype.h>.
1555 (build_asm_hash_table): Remove unused local variable i.
1556 (cgen_parse_keyword): Add casts to avoid warnings.
1558 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1559 symbol. Fix indentation.
1560 (print_insn_little_arm): Likewise.
1562 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1564 * configure.in: Use AM_DISABLE_SHARED.
1565 * aclocal.m4, configure: Rebuild with libtool 1.2.
1567 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1569 These patches are courtesy of Jonathan Walton and Tony Thompson
1570 (athompso@cambridge.arm.com).
1572 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1575 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1576 both the offset and the label closest to the destination.
1578 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1580 * m32r-opc.h: Regenerate.
1582 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1584 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1586 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1588 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1589 assume that info->symbols is non-empty.
1591 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1593 * alpha-opc.c (cvtqs) There is no such thing.
1594 (cvttq): Missing most of the /*d variants.
1596 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1598 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1599 delayed branches or jumps.
1601 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1603 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1605 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1606 * tic30-dis.c (print_branch): Likewise.
1608 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1610 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1611 saved_symbol code as it is no longer needed.
1613 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1615 * cgen-asm.c: Include symcat.h.
1616 * cgen-dis.c,cgen-opc.c: Ditto.
1617 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1619 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1621 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1623 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1625 * m32r-opc.[ch]: Regenerate.
1627 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1629 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1630 arguments. Don't perform validation here.
1631 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1633 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1635 * m32r-opc.c: Regenerate.
1637 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1639 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1640 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1642 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1644 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1646 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1648 * configure.in: Get the version number from BFD.
1649 * configure: Rebuild.
1651 From H.J. Lu <hjl@gnu.org>:
1652 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1653 * Makefile.in: Rebuild.
1655 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1657 * m32r-opc.c: Regenerate.
1658 * m32r-opc.h: Regenerate.
1660 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1662 * m32r-opc.c: Regenerate.
1664 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1666 Fix rac to accept only a0:
1667 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1668 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1669 Introduce OPERAND_GPR.
1670 * d10v-dis.c (print_operand): Likewise.
1672 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1674 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1675 (cgen_hw_lookup): Make result const.
1676 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1678 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1680 * configure, aclocal.m4: Rebuild with new libtool.
1682 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1684 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1685 instructions use a PC relative branch, not absolute.
1687 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1689 * configure.in: Set libtool_enable_shared rather than
1690 libtool_shared. Remove diversion hack.
1691 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1693 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1695 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1696 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1698 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1700 * tic30-dis.c: New file.
1701 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1702 * configure.in: Handle bfd_tic30_arch.
1703 * Makefile.am: Rebuild dependencies.
1704 (CFILES): Add tic30-dis.c
1705 (ALL_MACHINES): Add tic30-dis.lo.
1706 * configure, Makefile.in: Rebuild.
1708 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1710 * m32r-opc.h (HAVE_CPU_M32R): Define.
1712 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1714 * v850-opc.c (insertion routines): If both alignment and size is
1715 wrong then report this.
1717 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1719 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1720 Only recognize instructions for the current target_processor.
1722 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1724 * d10v-dis.c (PC_MASK): Correct value.
1725 (print_operand): If there's a reloc, don't calculate the
1726 address because they could be in different sections.
1728 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1730 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1731 instruction after the 4650's "mul" instruction; nobody's using the
1732 4010 these days. If object files someday indicate which processor
1733 variant they're intended for, we can do a better job at this.
1735 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1737 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1738 table provided entry size. Use CGEN_INSN_MNEMONIC.
1739 (cgen_parse_keyword): Rewrite.
1740 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1741 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1742 * cgen-opc.c: Clean up pass over `struct foo' usage.
1743 (cgen_keyword_lookup_value): Handle "" entry.
1744 (cgen_keyword_add): Likewise.
1746 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1748 * mips-opc.c: Add FP_D to s.d instruction flags.
1750 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1752 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1754 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1756 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1757 PC relative offset forms before the 15 bit forms. An assembler command
1758 line option now chooses the default.
1760 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1762 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1763 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1765 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1767 * configure: Only build libopcodes shared if --enable-shared's value
1768 was `yes', or was set to `*opcodes*'.
1769 * aclocal.m4: Likewise.
1770 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1771 original source of this bit of code. It's not clear what the best fix
1774 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1776 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1777 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1778 offset forms before the 15 bit forms, to default to the long forms.
1780 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1782 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1784 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1786 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1787 symbol if none is present.
1788 (print_insn_big_arm): Prevent examination of stored symbol if
1791 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1793 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1795 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1797 * disassemble.c: Remove disasm_symaddr() function.
1799 * arm-dis.c: Use info->symbol instead of info->flags to determine
1800 if disassmbly should be in Thumb or Arm mode.
1802 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1804 * arm-dis.c: Add support for disassembling Thumb opcodes.
1805 (print_insn_thumb): New function.
1807 * disassemble.c (disasm_symaddr): New function.
1809 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1810 (thumb_opcodes): Table of Thumb opcodes.
1812 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1814 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1816 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1817 and 'v' as operand types.
1819 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1821 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1822 <olivier.carmona@di.epfl.ch>.
1823 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1824 which has a two word opcode with a one word argument.
1826 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1828 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1829 unsigned, not signed.
1830 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1832 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1834 * d10v-dis.c (print_operand):
1835 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1837 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1839 * d10v-opc.c (OPERAND_FLAG): Split into:
1840 (OPERAND_FFLAG, OPERAND_CFLAG) .
1844 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1846 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1847 field for all INSN_MACRO's.
1848 * mips16-opc.c: same
1850 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1852 * mips-opc.c (sync,cache): These are 3900 insns.
1854 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1856 sh-opc.h (sh_table): Remove ftst/nan.
1858 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1860 * mips-opc.c (ffc, ffs): Fix mask.
1862 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1864 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1867 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1869 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1870 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1872 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1874 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1875 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1877 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1879 * v850-dis.c (disassemble): Replace // with /* ... */
1881 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1883 * sparc-opc.c: Add wr & rd for v9a asr's.
1884 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1885 (v9a_asr_reg_names): New variable.
1886 Patch from David Miller <davem@vger.rutgers.edu>.
1888 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1890 * sparc-opc.c (v9notv9a): New insn type.
1891 (IMPDEP): Move to the end to not conflict with edge8 et al.
1892 Patch from David Miller <davem@vger.rutgers.edu>.
1894 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1896 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1898 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1900 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1902 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1904 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1905 of disassemble_info structure to determine if an overlay address
1906 has a matching symbol in low memory.
1908 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1909 new symbol_at_address_func field in disassemble_info structure.
1911 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1913 * v850-opc.c (extract_d22): Use signed arithmatic.
1915 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1917 * mips-opc.c: Three op mult is not an ISA insn.
1919 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1921 * mips-opc.c: Fix formatting.
1923 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1925 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1926 than assuming that char is signed. Explicitly sign extend 16 bit
1927 values, rather than assuming that short is 16 bits.
1928 (OP_sI, OP_J, OP_DIR): Likewise.
1930 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1932 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1935 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1937 * v850-opc.c: Fix typo in comment.
1939 * v850-dis.c (disassemble): Add test of processor type when
1940 determining opcodes.
1942 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1944 * configure.in: Use a diversion to set enable_shared before the
1945 arguments are parsed.
1946 * configure: Rebuild.
1948 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1950 * m68k-opc.c (TBL1): Use ! rather than `.
1951 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1953 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1955 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1957 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1959 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1962 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1963 * aclocal.m4: Rebuild with new libtool.
1964 * configure: Rebuild.
1966 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1968 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1970 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1972 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1974 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1976 * v850-opc.c (v850_opcodes): Further rearrangements.
1978 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1980 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1982 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1984 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1987 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1989 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1991 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1993 * v850-opc.c: Initialise processors field of v850_opcode structure.
1995 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1997 Merge changes from Martin Hunt:
1999 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
2001 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
2002 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
2003 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
2005 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
2007 * d30v-dis.c (print_insn): First operand of d*i (delayed
2008 branch) instructions is relative.
2010 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
2011 (d30v_operand_table): Add IMM6S3 type.
2012 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
2014 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
2015 and cmp instructions.
2017 * d30v-opc.c: Correct entries for repeat*, and sat*.
2018 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
2019 types. Correct several formats.
2021 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
2023 * d30v-opc.c (pre_defined_registers): Change control registers.
2025 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
2026 SHORT_C2. Manual was incorrect.
2028 * d30v-dis.c (lookup_opcode): Return value now indicates
2029 if an opcode has a short and a long form. Used for deciding
2030 to append a ".s" or ".l".
2031 (print_insn): Append a ".s" to an instruction if it is
2032 the short form and ".l" if it is a long form. Do not append
2033 anything if the instruction has only one possible size.
2035 * d30v-opc.c: Change mulx2h to require an even register.
2036 New form: SHORT_A2; a SHORT_A form that needs an even
2037 register as the first operand.
2039 * d30v-dis.c (print_insn_d30v): Fix problem where the last
2040 instruction was not being disassembled if there were an odd
2041 number of instructions.
2043 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
2045 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
2047 * v850-dis.c (disassemble): Improved display of register lists.
2049 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
2051 * sparc-opc.c (sparc_opcodes): Fix assembler args to
2052 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
2053 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
2054 fandnot1s, fandnot2s.
2056 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
2058 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
2060 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
2062 * cgen-asm.c (cgen_parse_address): New argument resultp.
2063 All callers updated.
2064 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
2066 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
2068 * mn10200-dis.c (disassemble): PC relative instructions are
2069 relative to the next instruction, not the current instruction.
2071 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
2073 * v850-dis.c (disassemble): Only signed extend values that are not
2074 returned by extract functions.
2075 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
2077 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
2079 * v850-opc.c: Update comments. Remove use of
2080 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
2082 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
2084 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
2086 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
2088 * configure: Rebuilt with latest devo autoconf for NT support.
2090 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
2092 * v850-dis.c (disassemble): Use curly brace syntax for register
2095 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
2096 where r0 is being used as a destination register.
2098 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
2100 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
2102 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
2104 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
2106 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
2108 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
2109 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
2112 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2114 * configure (cgen_files): Add support for v850e target.
2115 * configure.in (cgen_files): Add support for v850e target.
2117 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2119 * configure (cgen_files): Add support for v850ea target.
2120 * configure.in (cgen_files): Add support for v850ea target.
2122 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
2124 * configure.in (bfd_arc_arch): Add.
2125 * configure: Rebuild.
2126 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
2127 * Makefile.in: Rebuild.
2128 * arc-dis.c, arc-opc.c: New files.
2129 * disassemble.c (ARCH_all): Define ARCH_arc.
2130 (disassembler): Add ARC support.
2132 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
2134 * v850-dis.c (disassemble): Add support for v850EA instructions.
2136 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
2137 (v850_opcodes): Add v850EA instructions.
2139 * v850-dis.c (disassemble): Add support for v850E instructions.
2141 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
2142 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
2143 insert_spe, extract_spe): New Functions.
2144 (v850_opcodes): Add v850E instructions.
2146 * v850-opc.c: Reorganised and re-layed out to improve readability
2149 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
2151 * configure: Rebuild with autoconf 2.12.1.
2153 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
2155 * aclocal.m4, configure: Rebuild with new automake patches.
2157 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
2159 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
2160 * acinclude.m4: Just include acinclude.m4 from BFD.
2161 * aclocal.m4, configure: Rebuild.
2163 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
2165 * Makefile.am: New file, based on old Makefile.in.
2166 * acconfig.h: New file.
2167 * acinclude.m4: New file.
2168 * stamp-h.in: New file.
2169 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
2170 Removed shared library handling; now handled by libtool. Replace
2171 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
2172 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
2173 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
2174 handling in AC_OUTPUT.
2175 * dep-in.sed: Change .o to .lo.
2176 * Makefile.in: Now built with automake.
2177 * aclocal.m4: Now built with aclocal.
2178 * config.in, configure: Rebuild.
2180 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
2182 * mips-opc.c: Fix typo/thinko in "eret" instruction.
2184 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
2186 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2188 * sparc-dis.c (sorted_opcodes): New static local.
2189 (struct opcode_hash): `opcode' is pointer to const element.
2190 (build_hash): First arg is now table of sorted pointers.
2191 (print_insn_sparc): Sort opcodes by sorting table of pointers.
2192 (compare_opcodes): Update.
2194 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
2196 * cgen-opc.c: #include <ctype.h>.
2197 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2198 Handle case insensitive hashing.
2199 (hash_keyword_value): Change type of `value' to unsigned int.
2201 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2203 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2204 precision FP, mark it as such. Likewise for double precision
2205 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2208 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2210 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2212 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2213 nesting depth when all the macros are expanded.
2215 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2217 * sparc-opc.c: The fcmp v9a instructions take an integer register
2218 as a destination, not a floating point register. From Christian
2219 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2221 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2223 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2224 syntax. From Roman Hodek
2225 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2227 * i386-dis.c (twobyte_has_modrm): Fix pand.
2229 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2231 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2233 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2235 * arm-dis.c: Add prototypes for arm_decode_shift and
2238 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2240 * mips-opc.c: Add r3900 insns.
2242 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2244 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2245 print delay slot instructions on the same line. When using a PC
2246 relative load, add a comment with the value being loaded if it can
2249 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2251 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2252 to pushS/popS for segment regs and byte constant so that
2253 pushw/popw printed when in 16 bit data mode.
2255 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2256 print cbtw, cwtd in 16 bit data mode.
2257 * i386-dis.c (putop): extra case W to support above.
2259 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2260 address size prefix in 16 bit address mode.
2262 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2264 * sh-dis.c: Reindent. Rename local variable fprintf to
2267 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2269 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2271 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2273 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2275 * mips16-opc.c (mip16_opcodes): same.
2277 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2279 * m68k-opc.c (moveb): Change $d to %d.
2281 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2283 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2284 (twobyte_has_modrm): Likewise.
2286 (OP_MMX, OP_EM, OP_MS): New static functions.
2288 * i386-dis.c: Revert patch of April 4. The output now matches
2291 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2293 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2296 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2298 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2300 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2302 * Makefile.in (install): Depend upon installdirs.
2303 (installdirs): New target.
2305 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2307 From Thomas Graichen <graichen@rzpd.de>:
2308 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2309 * configure: Rebuild.
2311 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2313 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2314 Delete string{,s}.h support.
2316 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2318 * cgen-asm.c (cgen_parse_operand_fn): New global.
2319 (cgen_parse_{{,un}signed_integer,address}): Update call to
2320 cgen_parse_operand_fn.
2321 (cgen_init_parse_operand): New function.
2322 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2323 from cgen_asm_init_parse.
2324 (m32r_cgen_assemble_insn): New operand `errmsg'.
2325 Delete call to as_bad, return error message to caller.
2326 (m32r_cgen_asm_hash_keywords): #if 0 out.
2328 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2330 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2332 [case 'J']: Fix typo in register name.
2334 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2336 * configure.in: Substitute SHLIB_LIBS.
2337 * configure: Rebuild.
2338 * Makefile.in (SHLIB_LIBS): New variable.
2339 ($(SHLIB)): Use $(SHLIB_LIBS).
2341 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2343 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2345 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2347 * disassemble.c (disassembler): Handle m32r.
2349 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2351 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2352 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2353 * Makefile.in (CFILES): Add them.
2354 (ALL_MACHINES): Add them.
2355 (dependencies): Regenerate.
2356 * configure.in (cgen_files): New variable.
2357 (bfd_m32r_arch): Add entry.
2358 * configure: Regenerate.
2360 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2362 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2363 * configure: Rebuild.
2365 * Makefile.in: Rebuild dependencies.
2367 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2369 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2372 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2374 * Branched binutils 2.8.
2376 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2378 * m10200-dis.c: Rename from mn10200-dis.c.
2379 * m10200-opc.c: Rename from mn10200-opc.c.
2380 * m10300-dis.c: Rename from mn10300-dis.c
2381 * m10300-opc.c: Rename from mn10300-opc.c.
2382 * Makefile.in: Update accordingly.
2384 * mips16-opc.c: Add mul and dmul macros.
2386 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2388 * makefile.vms: Update CFLAGS, add clean target.
2390 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2392 * mips-opc.c: Add "wait". From Ralf Baechle
2393 <ralf@gnu.ai.mit.edu>.
2395 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2396 * configure, config.in: Rebuild.
2397 * sysdep.h: Include <stdlib.h> if it exists.
2398 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2400 * Makefile.in: Rebuild dependencies.
2402 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2404 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2405 Andrew Bray <andy@madhouse.demon.co.uk>.
2407 * mips-opc.c: Add cast when setting mips_opcodes.
2409 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2411 * v850-dis.c (disassemble): Fix sign extension problem.
2412 * v850-opc.c (extract_d*): Fix sign extension problems to make
2413 disassembly calculate branch offsets correctly.
2415 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2417 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2419 * mips-opc.c: Add dctr and dctw.
2421 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2423 * d30v-dis.c (print_insn): Change the way signed constants
2426 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2428 * Makefile.in (BFD_H): New variable.
2429 (HFILES): New variable.
2430 (CFILES): Add all C files.
2431 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2432 Delete old dependencies, and build new ones.
2433 * dep-in.sed: New file.
2435 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2437 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2439 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2441 * mn10200-opc.c: Change "trap" to "syscall".
2442 * mn10300-opc.c: Add new "syscall" instruction.
2444 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2446 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2447 mulul insns on the coldfire.
2449 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2451 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2452 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2453 (print_insn_little_arm): Likewise.
2455 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2457 Based on patches from H.J. Lu <hjl@lucon.org>:
2458 * i386-dis.c (fetch_data): Add prototype.
2459 * m68k-dis.c (fetch_data): Add prototype.
2460 (dummy_print_address): Add prototype. Make static.
2461 * ppc-opc.c (valid_bo): Add prototype.
2462 * sparc-dis.c (build_hash_table): Add prototype.
2463 (is_delayed_branch, compute_arch_mask): Add prototypes.
2464 (print_insn_sparc): Make several local variables const.
2465 (compare_opcodes): Change arguments to const PTR. Add prototype.
2466 * sparc-opc.c (arg): Change name field to be const.
2467 (lookup_name, lookup_value): Add prototypes. Change table and
2468 name parameters to be const.
2469 (sparc_encode_asi): Change name parameter to be const.
2470 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2471 (sparc_encode_sparclet_cpreg): Likewise.
2472 (sparc_decode_asi): Change return type to be const.
2473 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2474 (sparc_decode_sparclet_cpreg): Likewise.
2476 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2478 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2479 Solaris doesn't like the combined options, and the -f is
2481 (stamp-tshlink, install): Likewise.
2483 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2485 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2488 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2490 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2492 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2494 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2497 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2499 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2501 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2503 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2505 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2507 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2509 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2511 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2512 floatformat_to_double to make portable.
2513 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2516 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2518 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2519 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2521 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2523 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2524 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2526 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2528 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2529 (OFF_SL_BR_SCALED): ... to this, and added the flag
2530 TIC80_OPERAND_BASEREL to the flags word.
2531 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2534 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2536 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2537 Change mips_opcodes from const array to a pointer,
2538 and change bfd_mips_num_opcodes from const int to int,
2539 so that we can increase the size of the mips opcodes table
2542 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2544 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2545 store BITNUM values in the table in one's complement form
2546 to match behavior when assembler is given a raw numeric
2547 value for a BITNUM operand.
2548 * tic80-dis.c (print_operand_bitnum): Ditto.
2550 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2552 * d30v-opc.c: Removed references to FLAG_X.
2554 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2556 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2558 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2560 * Makefile.in: Added d30v object files.
2561 * configure: (bfd_d30v_arch) Rebuilt.
2562 * configure.in: (bfd_d30v_arch) Added new case.
2563 * d30v-dis.c: New file.
2564 * d30v-opc.c: New file.
2565 * disassemble.c (disassembler) Add entry for d30v.
2567 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2569 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2570 representations for the floating point BITNUM values.
2572 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2574 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2575 in the table in one's complement form, as they appear in the
2577 (tic80_symbol_to_value): Use macros to access predefined
2579 (tic80_value_to_symbol): Ditto.
2580 (tic80_next_predefined_symbol): New function.
2581 * tic80-dis.c (print_operand_bitnum): Remove code that did
2582 one's complement for BITNUM values.
2584 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2586 * makefile.vms: Remove 8 bit characters. Update to latest
2589 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2591 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2593 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2595 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2596 (IMM24_PCREL): Likewise.
2598 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2600 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2601 address for an extended PC relative instruction that is not a
2604 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2606 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2609 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2611 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2612 (tic80_opcodes): Sort entries so that long immediate forms
2613 come after short immediate forms, making it easier for
2614 assembler to select the right one for a given operand.
2616 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2618 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2620 (print_insn_mips16): Likewise.
2622 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2624 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2625 a symbol class that restricts translation to just that
2626 class (general register, condition code, etc).
2628 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2630 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2631 and REG_DEST_E for register operands that have to be
2632 an even numbered register. Add REG_FPA for operands that
2633 are one of the floating point accumulator registers.
2634 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2635 (tic80_opcodes): Change entries that need even numbered
2636 register operands to use the new operand table entries.
2637 Add "or" entries that are identical to "or.tt" entries.
2639 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2641 * mips16-opc.c: Add new cases of exit instruction for
2643 * mips-dis.c (print_mips16_insn_arg): Display floating point
2644 registers in operands of exit instruction. Print `$' before
2645 register names in operands of entry and exit instructions.
2647 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2649 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2650 pairs for all predefined symbols recognized by the assembler.
2651 Also used by the disassembling routines.
2652 (tic80_symbol_to_value): New function.
2653 (tic80_value_to_symbol): New function.
2654 * tic80-dis.c (print_operand_control_register,
2655 print_operand_condition_code, print_operand_bitnum):
2656 Remove private tables and use tic80_value_to_symbol function.
2658 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2660 * d10v-dis.c (print_operand): Change address printing
2661 to correctly handle PC wrapping. Fixes PR11490.
2663 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2665 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2668 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2670 * mips-dis.c (print_insn_mips16): Set insn_info information.
2671 (print_mips16_insn_arg): Likewise.
2673 * mips-dis.c (print_insn_mips16): Better handling of an extend
2674 opcode followed by an instruction which can not be extended.
2676 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2678 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2679 coldfire moveb instruction to not allow an address register as
2680 destination. Although the documentation does not indicate that
2681 this is invalid, experiments uncovered unexpected behavior.
2682 Added a comment explaining the situation. Thanks to Andreas
2683 Schwab for pointing this out to me.
2685 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2687 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2688 entries are presorted so that entries with the same mnemonic are
2689 adjacent to each other in the table. Sort the entries for each
2690 instruction so that this is true.
2692 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2694 * m68k-dis.c: Include <libiberty.h>.
2695 (print_insn_m68k): Sort the opcode table on the most significant
2696 nibble of the opcode.
2698 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2700 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2701 "vsub", "vst", "xnor", and "xor" instructions.
2702 (V_a1): Renamed from V_a, msb of accumulator reg number.
2703 (V_a0): Add macro, lsb of accumulator reg number.
2705 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2707 * tic80-dis.c (print_insn_tic80): Broke excessively long
2708 function up into several smaller ones and arranged for
2709 the instruction printing function to be callable recursively
2710 to print vector instructions that have both a load and a
2711 math instruction packed into a single opcode.
2712 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2713 to explain why it comes after the other vector opcodes.
2715 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2717 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2718 move insns to handle immediate operands.
2720 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2722 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2723 fix operand mask in the "moveml" entries for the coldfire.
2725 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2727 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2728 New macros for building vector instruction opcodes.
2729 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2730 FMT_LI, which were unused. The field is now a flags field.
2731 Remove some opcodes that are possible, but illegal, such
2732 as long immediate instructions with doubles for immediate
2733 values. Add "vadd" and "vld" instructions.
2735 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2737 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2738 the order more logical. Move the shift alias instructions ("rotl",
2739 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2740 interspersed with the regular sr.x and sl.x instructions. Add
2741 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2742 "sub", "subu", "swcr", and "trap".
2744 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2746 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2747 (OFF_SL_PC): Renamed from OFF_SL.
2748 (OFF_SS_BR): New operand type for base relative operand.
2749 (OFF_SL_BR): New operand type for base relative operand.
2750 (REG_BASE): New operand type for base register operand.
2751 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2752 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2753 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2755 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2756 10 char field, padded with spaces on rhs, rather than a string
2757 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2758 than old TIC80_OPERAND_RELATIVE. Add support for new
2759 TIC80_OPERAND_BASEREL flag bit.
2761 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2763 * tic80-dis.c (print_insn_tic80): Print floating point operands
2765 * tic80-opc.c (SPFI): Add single precision floating point
2766 immediate operand type.
2767 (ROTATE): Add rotate operand type for shifts.
2768 (ENDMASK): Add for shifts.
2769 (n): Macro for the 'n' bit.
2770 (i): Macro for the 'i' bit.
2771 (PD): Macro for the 'PD' field.
2772 (P2): Macro for the 'P2' field.
2773 (P1): Macro for the 'P1' field.
2774 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2777 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2779 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2780 adding in current address for pc-relative operands.
2782 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2784 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2785 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2786 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2787 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2788 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2789 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2790 (REG_SCALED, LSI_SCALED): New operand types.
2791 (E): New macro for 'E' bit at bit 27.
2792 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2793 opcodes, including the various size flavors (b,h,w,d) for
2794 the direct load and store instructions.
2796 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2798 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2800 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2801 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2802 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2803 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2804 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2805 masks with "MASK_* & ~M_*" to get the M bit reset.
2806 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2808 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2810 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2811 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2812 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2814 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2815 CC, SICR, and LICR table entries.
2816 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2817 "bcnd", and "brcr" opcodes.
2819 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2821 * ppc-opc.c (powerpc_operands): Make comment match the
2822 actual fields (no shift field).
2823 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2824 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2825 partial implementation, work in progress.
2826 * tic80-opc.c (tic80_operands): Begin construction operands table.
2827 (tic80_opcodes): Continue populating opcodes table and start
2828 filling in the operand indices.
2829 (tic80_num_opcodes): Add this.
2831 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2833 * m68k-opc.c: Add #B case for moveq.
2835 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2837 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2838 before they are used.
2840 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2842 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2843 for "breakpoint" instruction.
2845 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2847 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2848 (dep): Use ALL_CFLAGS rather than CFLAGS.
2850 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2852 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2855 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2857 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2858 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2860 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2862 * mips16-opc.c: Add "abs".
2864 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2866 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2867 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2868 (disassembler): Add bfd_arch_tic80 support to set disassemble
2869 to print_insn_tic80.
2870 * tic80-dis.c (print_insn_tic80): Add stub.
2872 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2874 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2875 * configure: Regenerate with autoconf.
2876 * tic80-dis.c: Add file.
2877 * tic80-opc.c: Add file.
2879 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2881 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2883 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2885 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2886 (mn10200_opcodes): Use it for some logicals and btst insns.
2887 Add "break" and "trap" instructions.
2889 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2891 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2893 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2895 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2896 relative load or add now depends upon whether the instruction is
2899 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2901 * mn10200-dis.c: Finish writing disassembler.
2902 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2903 Fix mask for "jmp (an)".
2905 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2906 handle endianness issues for mn10300.
2908 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2910 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2912 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2913 instruction. Fix opcode field for "movb (imm24),dn".
2915 * mn10200-opc.c (mn10200_operands): Fix insertion position
2918 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2920 * mn10200-opc.c: Create mn10200 opcode table.
2921 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2922 but moving along nicely.
2924 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2926 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2928 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2930 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2931 specifiers for fmovem* instructions.
2933 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2935 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2937 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2939 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2942 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2944 * mn10300-opc.c: Add some comments explaining the various
2947 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2949 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2951 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2954 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2955 operand specifiers in fmovm* instructions.
2957 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2959 * ppc-opc.c (insert_li): Give an error if the offset has the two
2960 least significant bits set.
2962 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2964 * mips-dis.c (print_insn_mips16): Separate the instruction from
2965 the arguments with a tab, not a space.
2967 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2969 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2972 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2975 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2977 * configure: Rebuild with autoconf 2.12.
2979 Add support for mips16 (16 bit MIPS implementation):
2980 * mips16-opc.c: New file.
2981 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2982 (mips16_reg_names): New static array.
2983 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2984 after seeing a 16 bit symbol.
2985 (print_insn_little_mips): Likewise.
2986 (print_insn_mips16): New static function.
2987 (print_mips16_insn_arg): New static function.
2988 * mips-opc.c: Add jalx instruction.
2989 * Makefile.in (mips16-opc.o): New target.
2990 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2991 * configure: Rebuild.
2993 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2995 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2996 operand specifiers in *save, *restore and movem* instructions.
2998 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
3001 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
3002 register operands for immediate arithmetic, not, neg, negx, and
3003 set according to condition instructions.
3005 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
3006 specifier of the effective-address operand in immediate forms of
3007 arithmetic instructions. The specifier for the immediate operand
3008 notes how and where the constant will be stored.
3010 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
3012 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
3015 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
3018 * mn10300-dis.c (disassemble): Prefix registers with '%'.
3020 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
3022 * mn10300-dis.c (disassemble): Handle register lists.
3024 * mn10300-opc.c: Fix handling of register list operand for
3025 "call", "ret", and "rets" instructions.
3027 * mn10300-dis.c (disassemble): Print PC-relative and memory
3028 addresses symbolically if possible.
3029 * mn10300-opc.c: Distinguish between absolute memory addresses,
3030 pc-relative offsets & random immediates.
3032 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
3034 (disassemble): Handle SPLIT and EXTENDED operands.
3036 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
3038 * mn10300-dis.c: Rough cut at printing some operands.
3040 * mn10300-dis.c: Start working on disassembler support.
3041 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
3043 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
3045 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
3047 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3049 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
3051 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
3053 * mn10300-opc.c (mn10300_opcodes): Demand parens around
3054 register argument is calls and jmp instructions.
3056 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
3058 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
3059 getx operand. Fix opcode for mulqu imm,dn.
3061 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
3063 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
3064 in MN10300_OPERAND_SPLIT operands for how many bits
3065 appear in the basic insn word. Add IMM32_HIGH24,
3066 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
3067 (mn10300_opcodes): Use new operands as needed.
3069 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
3070 for bset, bclr, btst instructions.
3071 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
3073 * mn10300-opc.c (mn10300_operands): Remove many redundant
3074 operands. Update opcode table as appropriate.
3075 (IMM32): Add MN10300_OPERAND_SPLIT flag.
3076 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
3078 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
3080 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
3081 operands (for indexed load/stores). Fix bitpos for DI
3082 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
3083 few instructions that insert immediates/displacements in the
3084 middle of the instruction. Add IMM8E for 8 bit immediate in
3085 the extended part of an instruction.
3086 (mn10300_operands): Use new opcodes as appropriate.
3088 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3090 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
3091 sequential so the assembler never parallelizes it with
3094 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
3096 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
3097 a data/address register that appears in register field 0
3098 and register field 1.
3099 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
3101 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
3103 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
3104 standard disassembly.
3106 * alpha-opc.c (alpha_operands): Rearrange flags slot.
3107 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
3108 Recategorize PALcode instructions.
3110 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
3112 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
3114 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
3116 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
3117 there are no operand types.
3119 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
3121 * v850-opc.c (D9_RELAX): Renamed from D9, all references
3123 (v850_operands): Make sure D22 immediately follows D9_RELAX.
3125 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
3127 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
3129 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
3131 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
3132 and sst.w instructions.
3134 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
3137 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
3139 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
3142 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
3144 * ppc-opc.c (PPCPWR2): Define.
3145 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
3148 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
3150 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
3151 field for movhu instruction.
3153 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
3154 cast value to "long" not "signed long" to keep hpux10
3157 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
3159 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3162 * mn10300-opc.c (FMT*): Remove definitions.
3164 * mn10300-opc.c (mn10300_opcodes): Fix destination register
3165 for shift-by-register opcodes.
3167 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3168 into [AD][MN][01] for encoding the position of the register
3171 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
3173 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3174 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3176 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
3178 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3179 Fix various typos. Add "PAREN" operand.
3180 (MEM, MEM2): Define.
3181 (mn10300_opcodes): Surround all memory addresses with "PAREN"
3182 operands. Fix several typos.
3184 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3187 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
3189 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3190 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3192 (mn10300_opcodes): Break opcode format out into its own field.
3193 Update many operand fields to deal with signed vs unsigned
3194 issues. Fix one or two typos in the "mov" instruction
3195 opcode, mask and/or operand fields.
3197 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3199 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3200 m68851 wasn't reset.
3202 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3204 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3205 all opcodes. Very rough cut at operands for all opcodes.
3207 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3210 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3212 * mn10200-opc.c, mn10300-opc.c: New files.
3213 * mn10200-dis.c, mn10300-dis.c: New files.
3214 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3215 * disassemble.c: Break mn10x00 support into 10200 and 10300
3217 * configure.in: Likewise.
3218 * configure: Rebuilt.
3220 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3222 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3224 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3226 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3228 * disassemble (ARCH_mn10x00): Define.
3229 (disassembler): Handle bfd_arch_mn10x00.
3230 * configure.in: Recognize bfd_mn10x00_arch.
3231 * configure: Rebuilt.
3233 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3235 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3236 accordingly. Don't declare functions using op_rtn.
3238 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3240 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3241 params to be more standard.
3242 * (disassemble): Print absolute addresses and symbolic names for
3243 branch and jump targets.
3244 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3246 * (v850_opcodes): Add breakpoint insn.
3248 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3250 * m68k-opc.c: Move the fmovemx data register cases before the
3251 other cases, so that they get recognized before the data register
3252 does gets treated as a degenerate register list.
3254 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3256 * mips-opc.c: Add a case for "div" and "divu" with two registers
3257 and a destination of $0.
3259 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3261 * mips-dis.c (print_insn_arg): Add prototype.
3262 (_print_insn_mips): Ditto.
3264 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3266 * mips-dis.c (print_insn_arg): Print condition code registers as
3269 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3271 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3273 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3275 * v850-dis.c (disassemble): Make static. Provide prototype.
3277 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3279 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3282 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3284 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3285 ']' characters into the output stream.
3286 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3287 Add "memop" field to all opcodes (for the disassembler).
3288 Reorder opcodes so that "nop" comes before "mov" and "jr"
3289 comes before "jarl".
3291 * v850-dis.c (print_insn_v850): Fix typo in last change.
3293 * v850-dis.c (print_insn_v850): Properly handle disassembling
3294 a two byte insn at the end of a memory region when the memory
3295 region's size is only two byte aligned.
3297 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3299 * v850-dis.c (v850_reg_names): Define.
3300 (v850_sreg_names, v850_cc_names): Likewise.
3301 (disassemble): Very rough cut at printing operands (unformatted).
3303 * v850-opc.c (BOP_MASK): Fix.
3304 (v850_opcodes): Fix mask for jarl and jr.
3306 * v850-dis.c: New file. Skeleton for disassembler support.
3307 * Makefile.in Remove v850 references, they're not needed here.
3308 * configure.in: Add v850-dis.o when building v850 toolchains.
3309 * configure: Rebuilt.
3310 * disassemble.c (disassembler): Call v850 disassembler.
3312 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3313 (insert_d8_6, extract_d8_6): New functions.
3314 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3315 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3317 (IF4A, IF4B): Use "D7" instead of "D7S".
3318 (IF4C, IF4D): Use "D8_7" instead of "D8".
3319 (IF4E, IF4F): New. Use "D8_6".
3320 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3321 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3323 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3324 (v850_operands): Change D16 to D16_15, use special insert/extract
3325 routines. New new D16 that uses the generic insert/extract code.
3326 (IF7A, IF7B): Use D16_15.
3327 (IF7C, IF7D): New. Use D16.
3328 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3330 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3331 message. Issue an error if the branch offset is odd.
3333 * v850-opc.c: Add notes about needing special insert/extract
3334 for all the load/store insns, except "ld.b" and "st.b".
3336 * v850-opc.c (insert_d22, extract_d22): New functions.
3337 (v850_operands): Use insert_d22 and extract_d22 for
3339 (insert_d9): Fix range check.
3341 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3343 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3344 and set bits field to D9 and D22 operands.
3346 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3348 * v850-opc.c (v850_operands): Define SR2 operand.
3349 (v850_opcodes): "ldsr" uses R1,SR2.
3351 * v850-opc.c (v850_opcodes): Fix opcode specs for
3352 sld.w, sst.b, sst.h, sst.w, and nop.
3354 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3356 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3357 end of the opcode table.
3359 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3361 * d10v-opc.c (pre_defined_registers): Added register pairs,
3362 "r0-r1", "r2-r3", etc.
3364 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3366 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3367 Create I16U for an unsigned 16bit mmediate operand.
3368 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3370 * v850-opc.c (v850_operands): Define EP operand.
3371 (IF4A, IF4B, IF4C, IF4D): Use EP.
3373 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3374 with immediate operand, "movhi". Tweak "ldsr".
3376 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3377 correct. Get sld.[bhw] and sst.[bhw] closer.
3379 * v850-opc.c (v850_operands): "not" is a two byte insn
3381 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3383 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3385 * v850-opc.c (two): Get order of words correct.
3387 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3389 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3390 register source and destination operands.
3391 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3393 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3394 same thinko in "trap" opcode.
3396 * v850-opc.c (v850_opcodes): Add initializer for size field
3399 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3400 Add D8 for 8-bit unsigned field in short load/store insns.
3401 (IF4A, IF4D): These both need two registers.
3402 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3403 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3404 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3405 for "ldsr" and "stsr".
3406 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3409 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3410 short store word (sst.w).
3412 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3414 * v850-opc.c (v850_operands): Added insert and extract fields,
3415 pointers to functions that handle unusual operand encodings.
3417 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3419 * v850-opc.c (v850_opcodes): Enable "trap".
3421 * v850-opc.c (v850_opcodes): Fix order of displacement
3422 and register for "set1", "clr1", "not1", and "tst1".
3424 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3426 * v850-opc.c (v850_operands): Add "B3" support.
3427 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3430 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3432 * v850-opc.c: Close unterminated comment.
3434 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3436 * v850-opc.c (v850_operands): Add flags field.
3437 (v850_opcodes): add move opcodes.
3439 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3441 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3442 * configure: (bfd_v850v_arch) Add new case.
3443 * configure.in: (bfd_v850_arch) Add new case.
3444 * v850-opc.c: New file.
3446 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3448 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3450 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3452 * d10v-opc.c: Add additional information to the opcode
3453 table to help determinine which instructions can be done
3456 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3458 * mpw-make.sed: Update editing of include pathnames to be
3461 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3463 * arm-opc.h: Added "bx" instruction definition.
3465 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3467 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3469 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3471 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3473 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3475 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3477 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3479 * makefile.vms: Update for alpha-opc changes.
3481 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3483 * i386-dis.c (print_insn_i386): Actually return the correct value.
3484 (ONE, OP_ONE): #ifdef out; not used.
3486 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3488 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3489 Changed subi operand type to treat 0 as 16.
3491 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3493 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3496 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3498 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3499 memory transfer instructions. Add new format string entries %h and %s.
3500 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3503 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3505 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3506 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3508 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3510 * alpha-dis.c (print_insn_alpha_osf): Remove.
3511 (print_insn_alpha_vms): Remove.
3512 (print_insn_alpha): Make globally visible. Chose the register
3513 names based on info->flavour.
3514 * disassemble.c: Always return print_insn_alpha for the alpha.
3516 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3518 * d10v-dis.c (dis_long): Handle unknown opcodes.
3520 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3522 * d10v-opc.c: Changes to support signed and unsigned numbers.
3523 All instructions with the same name that have long and short forms
3524 now end in ".l" or ".s". Divs added.
3525 * d10v-dis.c: Changes to support signed and unsigned numbers.
3527 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3529 * d10v-dis.c: Change all functions to use info->print_address_func.
3531 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3533 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3534 move ccr/sr insns more strict so that the disassembler only
3535 selects them when the addressing mode is data register.
3537 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3538 * d10v-opc.c (pre_defined_registers): Declare.
3539 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3540 to pick a better name for the registers.
3542 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3544 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3545 operands for fexpand and fpmerge. From Christian Kuehnke
3546 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3548 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3550 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3551 print routine. Take new regnames and cpumask arguments.
3552 Kill the environment variable nonsense.
3553 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3554 (print_insn_alpha_vms): New function. Do VMS style regnames.
3555 * disassemble.c (disassembler): Test bfd flavour to pick
3556 between OSF and VMS routines. Default to OSF.
3558 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3560 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3561 * configure: Rebuild.
3562 * Makefile.in (install): Use @INSTALL_SHLIB@.
3564 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3566 * configure: (bfd_d10v_arch) Add new case.
3567 * configure.in: (bfd_d10v_arch) Add new case.
3568 * d10v-dis.c: New file.
3569 * d10v-opc.c: New file.
3570 * disassemble.c (disassembler) Add entry for d10v.
3572 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3574 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3575 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3577 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3579 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3580 distinguish between variants of the instruction set.
3581 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3582 distinguish between variants of the instruction set.
3584 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3586 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3587 the 8086 instruction set.
3588 * i386-dis.c: General cleanups. Make most things static. Add
3589 prototypes. Get rid of static variables aflags and dflags. Pass
3590 them as args (to almost everything).
3592 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3594 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3596 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3598 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3599 if the next arg is marked with SRC_IN_DST. Gross.
3601 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3602 we're looking for and find EXR.
3604 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3605 if we're looking for KBIT and we don't find it.
3607 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3610 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3611 3bit immediate operands.
3613 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3615 * Released binutils 2.7.
3617 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3618 <kkaempf@progis.ac-net.de>.
3620 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3622 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3624 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3626 * sparc-dis.c (print_insn_sparclite): New routine to print
3627 sparclite instructions.
3629 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3631 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3633 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3635 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3636 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3637 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3639 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3641 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3642 Use autoconf-set values.
3643 (docdir, oldincludedir): Removed.
3644 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3646 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3648 * alpha-opc.c: New file.
3649 * alpha-opc.h: Remove.
3650 * alpha-dis.c: Complete rewrite to use new opcode table.
3651 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3652 * configure: Rebuild with autoconf 2.10.
3653 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3654 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3656 (alpha-opc.o): New target.
3658 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3660 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3661 Set imm_added_to_rs1 even if the source and destination register
3664 * sparc-opc.c: Add some two operand forms of the wr instruction.
3666 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3668 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3671 * disassemble.c (disassembler): Handle H8/S.
3672 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3674 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3676 * sparc-opc.c: Add beq/teq as aliases for be/te.
3678 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3679 <sergei@msil.sps.mot.com>.
3681 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3683 * makefile.vms: New file.
3685 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3687 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3689 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3692 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3694 * i386-dis.c (OP_OFF): Call append_prefix.
3696 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3698 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3699 unsigned long to silence a warning from the Solaris PowerPC
3702 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3704 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3706 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3708 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3710 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3711 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3712 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3713 cpush, cpusha, cpull sparclet insns.
3715 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3717 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3719 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3721 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3722 Set F_FLOAT on other floating point instructions.
3724 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3726 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3728 (powerpc_opcodes): Add 860/821 specific SPRs.
3730 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3732 * configure.in: Permit --enable-shared to specify a list of
3733 directories. Set and substitute BFD_PICLIST.
3734 * configure: Rebuild.
3735 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3736 uses. Set to @BFD_PICLIST@.
3738 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3740 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3741 not "abs", which may be needed for the absolute in something
3742 like btst #0,@10:8. Print L_3 immediates separately from other
3743 immediates. Change ABSMOV reference to ABS8MEM.
3745 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3747 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3748 (current_arch_mask): New static global.
3749 (compute_arch_mask): New static function.
3750 (print_insn_sparc): Delete sparc_v9_p. New static local
3751 current_mach. Resort opcode table if current_mach changes.
3752 Generalize "insn not supported" test.
3753 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3754 Delete test for v9/!v9.
3755 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3757 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3758 (brfcx): Renamed to FBRX.
3759 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3760 coprocessor mnemonics are not supported on the sparclet).
3761 (condf): Renamed to CONDF.
3762 (SLCBCC2): Delete F_ALIAS flag.
3764 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3766 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3767 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3769 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3771 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3772 that the shared library version number is set correctly.
3774 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3776 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3777 Miles Bader <miles@gnu.ai.mit.edu>.
3778 * configure: Rebuild.
3780 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3782 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3785 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3787 * configure: Rebuild with autoconf 2.8.
3789 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3791 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3792 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3794 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3796 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3797 since they appear as targets in Makefile.in.
3798 * configure: Rebuild.
3800 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3802 * mpw-make.sed: Edit out shared library support bits.
3804 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3806 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3807 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3808 (sparc_opcodes): Add sparclet insns.
3809 (sparclet_cpreg_table): New static local.
3810 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3811 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3813 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3815 * i386-dis.c (index16): New static variable.
3816 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3818 (OP_indirE): Return result of OP_E.
3819 (OP_E): Check for 16 bit addressing mode, and disassemble
3820 correctly. Optimised 32 bit case a little. Don't print
3821 "(base,index,scale)" when sib specifies only an offset.
3823 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3825 * configure.in: Set and substitute SHLIB_DEP.
3826 * configure: Rebuild.
3827 * Makefile.in (SHLIB_DEP): New variable.
3828 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3829 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3830 COMMON_SHLIB, add them to piclist with appropriate modifications.
3831 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3832 here: just use piclist.
3834 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3836 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3837 (print_insn_sparc): Rewrite v9/not-v9 tests.
3838 (compare_opcodes): Likewise.
3839 * sparc-opc.c (MASK_<ARCH>): Define.
3840 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3841 (sparclet,v6notv9): Define.
3842 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3843 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3845 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3847 * configure.in: Call AC_PROG_CC before configure.host.
3848 * configure: Rebuild.
3850 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3852 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3854 * i386-dis.c (onebyte_has_modrm): New static array.
3855 (twobyte_has_modrm): New static array.
3856 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3858 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3860 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3863 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3865 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3868 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3870 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3871 m68010up, not just m68020up | cpu32.
3873 * Makefile.in (SONAME): New variable.
3874 ($(SHLINK)): Make a link to the transformed name, as well.
3875 (stamp-tshlink): New target.
3876 (install): Skip stamp-tshlink during install.
3878 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3880 * configure.in: Call AC_ARG_PROGRAM.
3881 * configure: Rebuild.
3882 * Makefile.in (program_transform_name): New variable.
3883 (install): Transform library name before installing it.
3885 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3887 * i960-dis.c (mem): Add HX dcinva instruction.
3889 Support for building as a shared library, based on patches from
3890 Alan Modra <alan@spri.levels.unisa.edu.au>:
3891 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3892 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3893 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3894 * configure: Rebuild.
3895 * Makefile.in (ALLLIBS): New variable.
3896 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3897 (COMMON_SHLIB, SHLINK): New variables.
3898 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3899 (STAGESTUFF): Remove variable.
3900 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3901 (stamp-piclist, piclist): New targets.
3902 ($(SHLIB), $(SHLINK)): New targets.
3903 ($(OFILES)): Depend upon stamp-picdir.
3904 (disassemble.o): Build twice if PICFLAG is set.
3905 (MOSTLYCLEAN): Add pic/*.o.
3906 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3907 (distclean): Remove pic and stamp-picdir.
3908 (install): Install shared libraries.
3909 (stamp-picdir): New target.
3911 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3913 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3914 Print unknown instruction as "unknown", rather than in hex.
3916 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3918 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3920 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3922 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3924 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3926 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3927 when necessary. From Ulrich Drepper
3928 <drepper@myware.rz.uni-karlsruhe.de>.
3930 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3932 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3933 sparc_num_opcodes. Update architecture enum values.
3934 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3935 (sparc_opcode_lookup_arch): New function.
3936 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3937 (sparc_opcodes): Add v9a shutdown insn.
3939 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3941 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3942 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3944 (print_insn_sparc64): Deleted.
3945 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3948 * sparc-opc.c (architecture_pname): Add v9a.
3950 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3952 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3953 incorrectly defined as 0x16 when it should be 0x15.
3954 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3955 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3956 excb (exception barrier) which is defined in the Alpha
3957 Architecture Handbook version 2.
3958 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3959 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3960 disassembled as or, for example.
3962 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3964 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3965 (_print_insn_mips): Change i from int to unsigned int.
3967 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3969 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3970 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3972 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3974 * i386-dis.c: Added Pentium Pro instructions.
3976 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3978 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3981 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3983 * sh-opc.h (sh_nibble_type): Added REG_B.
3984 (sh_arg_type): Added A_REG_B.
3985 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3987 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3989 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3991 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3993 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3995 * Makefile.in (distclean): Remove stamp-h. From Ronald
3996 F. Guilmette <rfg@monkeys.com>.
3998 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
4000 From David Mosberger-Tang <davidm@azstarnet.com>:
4001 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
4004 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4006 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
4007 (sh_table): Added many SH3 opcodes.
4008 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
4010 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4012 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
4013 (subco,subco.): Mark this PPC, not PPCCOM.
4015 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
4017 * configure: Rebuild with autoconf 2.7.
4019 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
4021 * configure: Rebuild with autoconf 2.6.
4023 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
4025 * configure.in: Sort list of architectures. Accept but do nothing
4026 for alliant, convex, pyramid, romp, and tahoe.
4028 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
4030 * a29k-dis.c (print_special): Change num to unsigned int.
4032 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
4034 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
4037 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
4039 * configure.in: Call AC_CHECK_PROG to find and cache AR.
4040 * configure: Rebuilt.
4042 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
4044 * configure.in: Add case for bfd_i860_arch.
4045 * configure: Rebuild.
4047 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
4049 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
4050 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
4051 (NEXTDOUBLE): Likewise.
4052 (print_insn_m68k): Don't match fmoveml if there is more than one
4053 register in the list.
4054 (print_insn_arg): Handle a place of '8' for a type of 'L'.
4056 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
4058 * m68k-opc.c: Use #W rather than #w.
4059 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
4061 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
4063 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
4064 and likewise for all the dbxx opcodes.
4066 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
4068 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
4070 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
4072 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
4073 the VR4100 specific instructions to the mips_opcodes structure.
4075 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
4077 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
4078 ugly Metrowerks bug in CW6, is fixed in CW7.
4080 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4082 * ppc-opc.c (whole file): Add flags for common/any support.
4084 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
4086 * Makefile.in (BISON): Remove macro.
4087 (FLAGS_TO_PASS): Remove BISON.
4089 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
4091 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
4093 * m68k-dis.c (print_insn_m68k): Recognize all two-word
4094 instructions that take no args by looking at the match mask.
4095 (print_insn_arg): Always print "%" before register names.
4096 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
4097 [case '_']: Don't print "@#" before address.
4098 [case 'J']: Use "%s" as format string, not register name.
4099 [case 'B']: Treat place == 'C' like 'l' and 'L'.
4101 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
4103 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
4106 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
4108 From David Mosberger-Tang <davidm@azstarnet.com>
4110 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
4111 (alpha_insn_set): added definitions for VAX floating point
4112 instructions (Unix compilers don't generate these, but handcoded
4113 assembly might still use them).
4115 * alpha-dis.c (print_insn_alpha): added support for disassembling
4116 the miscellaneous instructions in the Alpha instruction set.
4118 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
4120 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
4121 no longer create sysdep.h, sed ppc-opc.c to work around a
4122 serious Metrowerks C bug.
4123 * mpw-make.in: Remove.
4124 * mpw-make.sed: New file, used by mpw-configure to edit
4125 Makefile.in into an MPW makefile.
4127 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
4129 * Makefile.in (maintainer-clean): New synonym for realclean.
4131 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
4133 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
4134 which use '0', '1', and '2' instead. Specify the proper size for
4135 a pmove immediate operand. Correct the pmovefd patterns to be
4136 moves to a register, not from a register.
4137 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
4139 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
4141 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
4142 %psr, %wim, %tbr as F_NOTV9.
4144 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
4146 * Makefile.in (Makefile): Just rebuild Makefile when running
4148 (config.h, stamp-h): New targets.
4149 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
4150 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
4151 rebuilding config.h.
4152 * configure: Rebuild.
4154 * mips-opc.c: Change unaligned loads and stores with "t,A"
4155 operands to use "t,A(b)".
4157 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4159 * sh-dis.c (print_insn_shx): Add F_FR0 support.
4161 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4163 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4164 until 3 instead of until 2.
4166 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
4168 * Makefile.in (ALL_CFLAGS): Define.
4169 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4170 (MOSTLYCLEAN): Add config.log.
4171 (distclean): Don't remove config.log.
4172 * configure.in: Substitute HDEFINES.
4173 * configure: Rebuild.
4175 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4177 * sh-opc.h (sh_arg_type): Add F_FR0.
4178 (sh_table, case fmac): Add F_FR0 as first argument.
4180 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4182 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4184 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
4186 * sparc-dis.c: Remove all references to NO_V9.
4188 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4190 * aclocal.m4: Just include ../bfd/aclocal.m4.
4191 * configure: Rebuild.
4193 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4195 * sparc-dis.c (X_DISP19): Define.
4196 (print_insn, case 'G'): Use it.
4197 (print_insn, case 'L'): Sign extend displacement.
4199 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4201 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4202 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4203 host_makefile_frag or frags.
4204 * aclocal.m4: New file.
4205 * configure: Rebuild.
4206 * Makefile.in (INSTALL): Set to @INSTALL@.
4207 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4208 (INSTALL_DATA): Set to @INSTALL_DATA@.
4210 (AR_FLAGS): Set to rc rather than qc.
4211 (CC): Define as @CC@.
4212 (CFLAGS): Set to @CFLAGS@.
4213 (@host_makefile_frag@): Remove.
4214 (config.status): Remove dependency upon @frags@.
4216 * configure.in: ../bfd/config.bfd now just sets shell variables.
4217 Use them rather than looking through target Makefile fragments.
4218 * configure: Rebuild.
4220 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4222 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4224 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4226 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4227 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4230 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4231 (lookup_{name,value}): New functions.
4232 (prefetch_table): New static local.
4233 (sparc_{encode,decode}_prefetch): New functions.
4234 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4236 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4238 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4241 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4243 * sh-dis.c: Correct comment on first line of file.
4245 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4247 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4249 * sparc-opc.c (asi, membar): New static locals.
4250 (sparc_{encode,decode}_{asi,membar}): New functions.
4251 (sparc_opcodes, membar insn): Fix.
4252 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4253 Support decoding of membar masks.
4256 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4258 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4260 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4262 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4263 and likewise for the other branches. Add bhs as an alias for bcc,
4264 and likewise for the size variants. Add dbhs as an alias for
4267 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4269 * sh-opc.h (FP sts instructions): Update to match reality.
4271 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4273 * m68k-dis.c: (fpcr_names): Add % before all register names.
4274 (reg_names): Likewise.
4275 (print_insn_arg): Don't explicitly print % before register names.
4276 Add % before register names in static array names. In case 'r',
4277 print data registers as `@(Dn)', not `Dn@'. When printing a
4278 memory address, don't print @# before it.
4279 (print_indexed): Change base_disp and outer_disp from int to
4280 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4281 syntax. Sign extend 8 byte displacement correctly.
4282 (print_base): Print using MIT syntax. Print zpc when appropriate.
4283 Change parameter disp from int to bfd_vma.
4285 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4288 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4290 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4291 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4292 * sh-opc.h (sh_arg_type): Add new operand types.
4293 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4295 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4297 * Makefile.in (distclean): Remove generated file config.h.
4299 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4301 * Makefile.in (distclean): Remove generated file config.h.
4303 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4305 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4307 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4309 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4310 rather than numopcodes. Use m68k_opcodes rather than removed
4311 opcode function. Don't check F_ALIAS.
4312 (print_insn_arg): Change first parameter to be const char *.
4313 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4314 (m68k-opc.o): New target.
4315 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4316 * configure: Rebuild.
4318 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4320 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4321 (opcode_bits, opcode_hash_table): New variables.
4322 (opcodes_initialized): Renamed from opcodes_sorted.
4323 (build_hash_table): New function.
4324 (is_delayed_branch): Use hash table.
4325 (print_insn): Renamed from print_insn_sparc, made static.
4326 Build and use hash table. If !sparc64, ignore sparc64 insns,
4327 and vice-versa if sparc64.
4328 (print_insn_sparc, print_insn_sparc64): New functions.
4329 (compare_opcodes): Move sparc64 opcodes to end.
4330 Print commutative insns with constant second.
4331 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4333 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4335 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4336 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4337 avoids printing a delay slot in a delay slot.
4338 * sh-opc.h (sh_table): Fully bracket last entry.
4340 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4342 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4344 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4346 * configure.in: Get host_makefile_frag from ${srcdir}.
4348 * configure.in: Autoconfiscated. Check for string[s].h. Create
4349 config.h from config.in. Don't set up sysdep.h link.
4350 * sysdep.h: New file.
4351 * configure, config.in: New files, generated from configure.in.
4352 * Makefile.in: Updated to be processed autoconf-style.
4353 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4354 (Makefile): Depend on config.status.
4355 (config.status): New rule.
4356 * configure.bat: Update Makefile substitutions.
4358 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4360 * mips-opc.c (L1): Define.
4361 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4362 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4365 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4367 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4368 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4369 have multiple add units but only a single logical unit.
4371 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4372 shifted by 18, without any insertion or extraction function.
4373 (insert_cr, extract_cr): Remove.
4375 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4377 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4380 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4382 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4383 * sh-opc.h: Add copyright.
4385 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4387 * Makefile.in (crunch-m68k): Delete extra target accidentally
4388 checked in a while ago.
4390 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4392 * sh-opc.h (sh_table): Add SH3 support.
4394 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4396 * sh-opc.h: Added bsrf and braf.
4398 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4400 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4401 bogus [ls]fm{ea,fd} patterns.
4403 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4404 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4405 initialize it from memory. Make function static.
4406 (print_insn_{big,little}_arm): New functions.
4407 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4408 the correct endianness.
4410 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4412 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4415 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4417 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4418 17th, so that it builds again using GCC as the compiler.
4420 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4422 * mips-dis.c (print_insn_little_mips): Cast return value from
4423 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4424 expects an unsigned long, and that might be fewer words of
4425 argument storage (e.g., if bfd_vma is long long on a 32-bit
4427 (print_insn_big_mips): Likewise with bfd_getb32 value.
4428 (_print_insn_mips): Now static.
4430 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4432 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4433 gcc memory hog problem with initializer is fixed.
4435 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4437 Merge in support for Mac MPW as a host.
4438 (Old change descriptions retained for informational value.)
4440 * mpw-config.in (archname): Compute from the config.
4441 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4443 * mpw-config.in (target_arch): Compute from canonical target.
4444 (m68k, mips, powerpc, sparc): Add architectures.
4445 * mpw-make.in (disassemble.c.o): Add.
4446 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4448 * mpw-config.in (BFD_MACHINES): Set to a default value.
4449 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4451 * mpw-make.in (CSEARCH): Add extra-include to search path.
4453 * mpw-config.in (varargs.h): Don't create.
4454 (sysdep.h): Create using forward-include.
4455 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4457 * mpw-config.in: New file, MPW version of configure.in.
4458 * mpw-make.in: New file, MPW version of Makefile.in.
4460 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4462 * alpha-dis.c (print_insn_alpha): Put empty statement after
4465 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4467 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4468 (low_sign_extend): Likewise.
4469 (get_field): Delete unused function.
4470 (set_field, deposit_14, deposit_21): Likewise.
4472 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4474 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4477 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4479 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4481 * alpha-opc.h (OSF_ASMCODE): define
4482 print pal-code names as defined in App C of the
4483 Alpha Architecture Reference Manual
4485 * alpha-dis.c: cleaned up output
4486 print stylized code forms as defined in App A.4.3 of the
4487 Alpha Architecture Reference Manual
4489 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4491 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4493 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4496 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4498 * m68k-dis.c (opcode): New function. Returns address of opcode
4499 table entry given index, even if the opcode table was split to
4500 work around gcc bugs.
4501 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4503 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4504 (reg_names): Now const.
4505 (print_insn_arg): Arrays cacheFieldName and names now const.
4506 (print_indexed): Array scales now const.
4508 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4510 * ppc-opc.c: Sort recently added instructions by minor opcode
4511 number within major opcode number.
4513 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4515 * hppa-dis.c: Include libhppa.h.
4517 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4519 * mips-opc.c: Change dli to use M_DLI, and add dla.
4521 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4523 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4525 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4527 * mips-opc.c: Add r4650 mul instruction.
4529 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4531 * mips-opc.c: Add uld and usd macros for unaligned double load and
4534 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4536 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4537 mfdcr, mtdcr, icbt, iccci.
4539 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4541 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4542 signed char fields to shorts, more portable.
4544 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4546 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4547 char fields as signed chars, since they may have negative values.
4549 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4551 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4552 (mycroft@netbsd.org).
4554 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4556 From "Logg, Ed" <elogg@ea.com>:
4557 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4558 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4561 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4563 * ppc-opc.c: Changes based on patch from David Edelsohn
4564 <edelsohn@mhpcc.edu>.
4565 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4568 (insert_tbr): New static function.
4569 (extract_tbr): New static function.
4570 (XFXFXM_MASK, XFXM): Define.
4571 (XSPRBAT_MASK, XSPRG_MASK): Define.
4572 (powerpc_opcodes): Add instructions to access special registers by
4573 name. Add mtcr and mftbu.
4575 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4577 * mips-opc.c (P3): Define.
4578 (mips_opcodes): Add mad and madu.
4580 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4582 * configure.in: Add W65 support.
4583 * disassemble.c: Likewise.
4584 * w65-opc.h, w65-dis.c: New files.
4586 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4588 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4591 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4593 * mips-opc.c: Add dli as a synonym for li.
4595 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4597 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4598 print something for reserved opcode values, even if it won't
4601 * mips-dis.c (_print_insn_mips): When initializing, shift right
4602 and mask, to avoid sign extension problems on the Alpha.
4604 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4607 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4609 * sh-opc.h (mov.l gbr): Get direction right.
4610 * sh-dis.c (print_insn_shx): New function.
4611 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4612 print opcodes with right byte order.
4614 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4616 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4617 to avoid conflicts with getopt.
4619 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4621 * hppa-dis.c (print_insn_hppa): Read the instruction using
4622 bfd_getb32, so that it works on a little endian or 64 bit host.
4623 Remove unused local variable op.
4625 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4627 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4628 addu does not work correctly if -mips3.
4630 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4632 * a29k-dis.c (print_special): Add special register names defined
4633 on 29030, 29040 and 29050.
4634 (print_insn): Handle new operand type 'I'.
4636 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4638 * Makefile.in (INSTALL): Use top level install.sh script.
4640 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4642 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4643 that it works on a little endian host.
4645 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4647 * configure.in: Use ${config_shell} when running config.bfd.
4649 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4651 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4653 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4655 * a29k-dis.c (print_insn): Print the opcode.
4657 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4659 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4661 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4663 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4665 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4667 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4668 which store a value into memory.
4670 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4672 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4673 * arm-dis.c, arm-opc.h: New files.
4675 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4677 * Makefile.in (ns32k-dis.o): Add dependency.
4678 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4679 string, not as array of chars.
4681 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4683 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4685 * sparc-opc.c: Added sparclite extended FP operations, and
4686 versions of v9 impdep* instructions permitting specification of
4689 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4691 * i960-dis.c (reg_names): Now const.
4692 (struct sparse_tabent): New type, copied from array type in mem
4694 (ctrl): Local static array ctrl_tab now const.
4695 (cobr): Local static array cobr_tab now const.
4696 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4697 static variable mem_tab no longer explicitly initialized. Changed
4698 mem_init to const array of struct sparse_tabent.
4699 (reg): Local static variable reg_tab no longer explicitly
4700 initialized. Changed reg_init to const array of struct
4702 (ea): Local static array scale_tab now const.
4704 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4707 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4709 * configure.bat: the disassember needs to be enabled for
4710 "objdump -d" to work in djgpp.
4712 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4714 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4715 (invalid_float): Enabled general version, doesn't require running
4716 on ns32k host. Changed to take char* argument, and test for
4717 explicitly specified sizes, instead of using sizeof() on host CPU
4719 (INVALID_FLOAT): Cast first argument.
4720 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4721 list_P032, list_M032): Now const.
4722 (optlist, list_search): Made appropriate arguments now point to
4724 (print_insn_arg): Changed static array of one-character-string
4725 pointers into a static const array of characters; fixed sprintf
4726 statement accordingly.
4728 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4730 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4731 from distribution. A ns32k-dis.c from a previous distribution has
4732 been brought up to date and supports the new interface.
4734 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4736 * configure.in: add bfd_ns32k_arch target support.
4738 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4739 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4741 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4743 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4746 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4748 * h8300-dis.c, mips-dis.c: Don't use true and false.
4750 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4752 * configure.in: Change --with-targets to --enable-targets.
4754 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4756 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4757 opcodes to the first instruction with that opcode, to speed
4758 disassembly of large files. From ralphc@pyramid.com (Ralph
4761 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4763 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4765 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4767 * configure.bat: update to latest makefile.in
4769 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4771 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4772 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4773 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4774 slot insn is in a delay slot.
4775 * z8k-opc.h: (resflg): Fix patterns.
4776 * h8500-opc.h Fix CR insn patterns.
4778 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4780 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4781 "cmpl" before POWER versions, so that gas -many uses them.
4783 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4785 * disassemble.c: New file.
4786 * Makefile.in (OFILES): Add disassemble.o.
4787 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4788 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4789 binutils/configure.in.
4791 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4792 opcode being examined.
4794 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4796 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4797 (insert_ral, insert_ram, insert_ras): New functions.
4798 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4799 RAS for store with update.
4801 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4803 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4804 (edelsohn@npac.syr.edu).
4806 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4808 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4811 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4813 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4815 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4817 * ppc-opc.c (powerpc_operands): The signedp field has been
4818 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4819 instead. Add new operand SISIGNOPT.
4820 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4821 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4822 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4825 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4827 * i386-dis.c (struct private): Renamed to dis_private. `private'
4828 is a reserved word for dynix cc.
4830 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4832 * configure.in: Change error message to refer to bfd/config.bfd
4833 rather than bfd/configure.in.
4835 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4837 * ppc-opc.c: Define POWER2 as short alias flag.
4838 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4841 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4843 * i960-dis.c (print_insn_i960): Don't read a second word for
4844 opcodes 0, 1, 2 and 3.
4846 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4848 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4850 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4852 * m68881-ext.c: Removed; no longer used.
4853 * Makefile.in: Changed accordingly.
4855 * m68k-dis.c (ext_format_68881): Don't declare.
4856 (print_insn_m68k): If an instruction uses place 'i', it uses at
4857 least four fixed bytes.
4858 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4859 extended float, convert to double using floatformat_to_double, not
4860 ieee_extended_to_double, and fetch the data before converting it.
4862 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4864 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4865 davidj@ICSI.Berkeley.EDU (David Johnson).
4867 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4869 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4870 PowerPC uses bdnz[l][a].
4872 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4874 * dis-buf.c, i386-dis.c: Include sysdep.h.
4876 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4878 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4880 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4881 by Motorola PowerPC 601 with PPC_OPCODE_601.
4882 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4883 Disassemble Motorola PowerPC 601 instructions as well as normal
4884 PowerPC instructions.
4886 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4888 * i960-dis.c (reg, mem): Just use a static array instead of
4891 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4893 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4894 condition name index if this is for a negated condition.
4896 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4897 Floating point format for 'H' operand is backwards from normal
4898 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4899 operands (fmpyadd and fmpysub), handle bizarre register
4900 translation correctly for single precision format.
4902 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4903 or 'I' operands if the next format specifier is 'M' (fcmp
4904 condition completer).
4906 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4908 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4909 single number giving a bitmask for the MB and ME fields of an M
4910 form instruction. Change NB to accept 32, and turn it into 0;
4911 also turn 0 into 32 when disassembling. Seperated SH from NB.
4912 (insert_mbe, extract_mbe): New functions.
4913 (insert_nb, extract_nb): New functions.
4914 (SC_MASK): Mask out SA and LK bits.
4915 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4916 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4917 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4918 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4919 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4920 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4921 (powerpc_macros): Define table of macro definitions.
4922 (powerpc_num_macros): Define.
4924 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4925 if PPC_OPERAND_NEXT is set.
4927 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4929 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4930 char. Retrieve contents using bfd_getl32 instead of shifting.
4932 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4934 * ppc-opc.c: New file. Opcode table for PowerPC, including
4935 opcodes for POWER (RS/6000).
4936 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4937 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4938 (CFILES): Add ppc-dis.c.
4939 (ppc-dis.o, ppc-opc.o): New targets.
4940 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4942 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4944 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4945 No space before 'u', 'f', or 'N'.
4947 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4949 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4950 farther than we should.
4952 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4954 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4956 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4958 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4960 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4961 needs it, to prevent reading past the end of a section.
4963 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4965 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4966 Removed t,A case for la; always use t,A(b) case.
4968 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4970 From Ted Lemen <mellon@pepper.ncd.com>
4971 * mips-dis.c (print_insn_arg): Handle 'k'.
4972 * mips-opc.c: Make cache use k, not t.
4974 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4976 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4977 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4978 FLOAT_FORMAT_CODE to put out floating point register names.
4980 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4982 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4984 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4986 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4988 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4990 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4991 larger than 32. Moved dsxx32 variants first for disassembler.
4993 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4995 * z8kgen.c, z8k-opc.h: Add full lda information.
4997 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4999 * hppa-dis.c (print_insn_hppa): Do not emit a space after
5000 movb instructions. Any necessary space will be emitted by
5001 the code to handle nullification completers.
5003 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5005 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
5007 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5009 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
5010 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
5012 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5014 * mips-opc.c: Correct lwu opcode value (book had it wrong).
5016 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5018 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
5019 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
5021 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
5023 * m88k-dis.c (m88kdis): comment change. Remove space after
5025 (printop): handle new arg types DEC and XREG for m88110.
5027 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
5029 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
5030 type for absolute branch addresses. Delete special
5031 "ble" and "be" code in 'W' operand code.
5033 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5035 * mips-opc.c: Set hazard information correctly for branch
5036 likely instructions.
5038 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5040 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
5041 info->fprintf_func for printing and info->print_address_func for
5044 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5046 * mips-opc.c: Set INSN_TRAP for tXX instructions.
5048 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5050 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
5051 Corrected second case of "b" for disassembler.
5053 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5055 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
5056 to BFD swapping routines to correspond to BFD name changes.
5058 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5060 * mips-opc.c: Change div machine instruction to be z,s,t rather
5061 than s,t. Change div macro to be d,v,t rather than d,s,t.
5062 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
5063 rem and remu which generates only the corresponding div
5064 instruction. This is for compatibility with the MIPS assembler,
5065 which only generates the simple machine instruction when an
5066 explicit destination of $0 is used.
5067 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
5069 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5071 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
5072 WR_31 hazard for bal, bgezal, bltzal.
5074 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5076 * hppa-dis.c (print_insn_hppa): Use print function
5077 from within the disassemble_info, not fprintf_filtered.
5079 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5081 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
5082 Law, law@cs.utah.edu.)
5084 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5086 * mips-opc.c ("absu"): Removed.
5089 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5091 * mips-opc.c: Added r6000 and r4000 instructions and macros.
5092 Changed hazard information to distinguish between memory load
5093 delays and coprocessor load delays.
5095 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5097 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
5099 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5101 * configure.in: Don't pass cpu to config.bfd.
5103 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5105 * m88k-dis.c (m88kdis): Make class unsigned.
5107 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
5109 * alpha-dis.c (print_insn_alpha): One branch format case was
5110 missing the instruction name.
5112 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5114 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
5115 Add the arch-specific auxiliary files.
5116 (OFILES): Remove the arch-specific auxiliary files
5117 and use BFD_MACHINES instead of DIS_LIBS.
5118 * configure.in: Set BFD_MACHINES based on --with-targets option.
5120 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5122 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
5125 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5127 * sparc-opc.c: Change CONST to const to deal with gcc
5128 -Dconst=__const -traditional.
5130 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5132 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
5133 coprocessor instructions out of #if 0, and made them use new
5136 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5138 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
5140 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
5142 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
5143 instruction, for use by the disassembler.
5145 * sparc-dis.c (SEX): Add sign extension macro. Replace many
5146 hand-coded sign extensions that depended on 32-bit host ints.
5147 FIXME, we still depend on big-endian host bitfield ordering.
5148 (sparc_print_insn): Set the insn_info_valid field, and the
5149 other fields that describe the instruction being printed.
5151 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
5153 * sparc-opc.c (call): Accept all 6 addressing modes valid for
5154 `jmp' instead of just one of them.
5156 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5158 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
5159 (fput_fp_reg_r): Renamed from fput_reg_r.
5160 (fput_fp_reg): New function.
5161 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5163 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5165 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5167 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5169 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5171 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5172 don't output a space.
5174 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5176 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
5178 * mips-opc.c: New file, containing opcode table from
5179 ../include/opcode/mips.h.
5180 * Makefile.in: Add it.
5182 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5184 * m88k-dis.c: New file, moved in from gdb and changed to use the
5185 new dis-asm.h disassembler interface.
5186 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5187 (m88k-dis.o): New target.
5189 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5191 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5192 argument string const char * to correspond to opcode/mips.h.
5194 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5196 * mips-dis.c: Updated to account for name changes in new version
5198 * Makefile.in: Added header file dependencies.
5200 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5202 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5204 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5206 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5207 extend, rather than shifts.
5209 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5211 * Makefile.in: Undo 15 June change.
5213 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5215 * m68k-dis.c (print_insn_arg): Change return value to byte count
5217 * m68k-dis.c: Re-write to detect invalid operands before
5218 printing anything, so we can handle this the same way we
5219 handle invalid opcodes.
5221 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5223 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5225 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5227 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5230 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5232 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5234 * configure.in: Do make sysdep.h link.
5235 * Makefile.in: Search ../include. Don't search ../bfd.
5237 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5239 Changes from Jeff Law, law@cs.utah.edu:
5240 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5241 Do not print a space before the completers specified by
5244 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5246 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5247 defined, since gdb has been fixed.
5249 Changes from Jeff Law, law@cs.utah.edu:
5250 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5251 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5252 be a *disassemble_info, not a *FILE.
5253 * hppa-dis.c: Support 'd', '!', and 'a'.
5254 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5255 * hppa-dis.c: Delete cases which are no longer needed.
5257 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5259 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5261 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5263 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5266 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5268 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5269 * configure.in: No longer need to configure to get sysdep.h.
5271 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5273 * Patches from Jeffrey Law <law@cs.utah.edu>.
5274 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5275 templates for 1.1 FP computational instructions.
5277 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5279 * h8500-dis.c (print_insn_h8500): Address argument is type
5281 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5284 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5285 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5287 * sparc-dis.c (compare_opcodes): Move static declaration to
5290 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5292 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5293 instruction, remove unimp hack from 'l' argument.
5295 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5297 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5300 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5302 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5303 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5306 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5308 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5309 arrays of string pointers to 2-d arrays of chars, to save
5312 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5314 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5315 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5317 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5319 * hppa-dis.c: New file from Utah, adapted to new disassembler
5321 * Makefile.in: Include it.
5323 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5325 * sh-dis.c, sh-opc.h: New files.
5327 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5329 * alpha-dis.c, alpha-opc.h: New files.
5331 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5333 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5336 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5338 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5340 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5342 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5345 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5347 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5348 and double percent signs a few places.
5350 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5352 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5353 Use info->print_address_func not print_address.
5355 * dis-buf.c (generic_print_address): New function.
5357 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5359 * Makefile.in: Add sparc-dis.c.
5360 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5362 Add `add' instruction to the set that get checked
5363 for a preceding `sethi' in order to print an absolute address.
5364 * (print_insn): Disassembly prefers real instructions.
5365 (is_delayed_branch): Speed up.
5366 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5367 Still missing some float ops, and needs testing.
5368 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5369 F_ALIAS. Use printf, not fprintf, when not passing a file
5371 (compare_opcodes): Check that identical instructions have
5372 identical opcodes, complain otherwise.
5375 * Include reg_names.
5377 Use dis-asm.h/read_memory_func interface.
5379 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5381 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5382 deliberately return non-zero to setjmp from longjmp. Otherwise
5383 this code fails to compile.
5385 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5387 * m68k-dis.c: Fix prototype for fetch_arg().
5389 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5391 * dis-buf.c: New file, for new read_memory_func interface.
5392 Makefile.in (OFILES): Include it.
5393 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5394 Use new read_memory_func interface.
5396 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5398 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5399 * h8500-opc.h: Fix couple of opcodes.
5401 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5403 * Makefile.in: add dvi & installcheck targets
5405 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5407 * Makefile.in: Update for h8500-dis.c.
5409 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5411 * h8500-dis.c, h8500-opc.h: New files
5413 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5415 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5416 ../include/dis-asm.h.
5417 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5418 and ../gdb/m68k-pinsn.c).
5419 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5420 and ../gdb/i386-pinsn.c).
5421 * m68881-ext.c: New file. Moved definition of
5422 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5423 * Makefile.in: Adjust for new files.
5424 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5425 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5426 can be dis-assembled.
5428 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5430 * mips-dis.c (print_insn_arg): Now returns void.
5432 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5434 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5435 files that use the macros.
5437 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5439 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5440 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5441 (CFILES): Added mips-dis.c.
5443 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5445 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5446 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5448 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5450 * Makefile.in: Improve *clean rules.
5451 * configure.in: Allow a default host.
5453 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5455 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5456 files include other sysdep files
5458 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5460 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5462 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5464 * configure.in: For host support, use ../bfd/configure.host
5465 so it stays in sync with the ../bfd/hosts database.
5467 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5469 * configure.in: use cpu-vendor-os triple instead of nested cases
5471 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5473 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5474 *always* the wrong one.
5476 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5478 * z8kgen.c: added copyright info
5480 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5482 * z8k-dis.c (unparse_instr): prettier tabs
5483 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5485 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5487 * configure.in: Add ncr* configuration.
5488 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5489 picayune ANSI compilers happy.
5491 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5493 * configure.in (i386): Make i386 and i486 synonymous for now.
5494 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5496 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5498 * Makefile.in (install): Fix typo.
5500 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5502 * Makefile.in (make): Remove obsolete crud.
5503 (sparc-opc.o): Avoid Sun Make VPATH bug.
5505 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5507 * Makefile.in: since there are no SUBDIRS, remove rule and
5508 references of subdir_do.
5510 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5512 * Makefile.in (install): Get the library name right here too.
5513 Don't install bfd.h, since it's unrelated to this library. No
5514 subdirs to recurse into, either.
5515 (CFILES): The source file has a .c suffix, not .o.
5517 * sparc-opc.c: New file, moved from BFD.
5518 * Makefile.in (OFILES): Build it.
5520 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5522 * z8k-dis.c: fixed forward refferences of some declarations.
5524 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5526 * Makefile.in: get the name of the library right
5528 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5530 * z8k-dis.c: knows how to disassemble z8k stuff
5531 * z8k-opc.h: new file full of z8000 opcodes
5535 version-control: never