1 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
3 * sh-opc.h (mov.l gbr): Get direction right.
4 * sh-dis.c (print_insn_shx): New function.
5 (print_insn_shl, print_insn_sh): Call print_insn_shx to
6 print opcodes with right byte order.
8 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
10 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
11 to avoid conflicts with getopt.
13 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
15 * hppa-dis.c (print_insn_hppa): Read the instruction using
16 bfd_getb32, so that it works on a little endian or 64 bit host.
17 Remove unused local variable op.
19 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
21 * mips-opc.c: Use or instead of addu for pseudo-op move, since
22 addu does not work correctly if -mips3.
24 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
26 * a29k-dis.c (print_special): Add special register names defined
27 on 29030, 29040 and 29050.
28 (print_insn): Handle new operand type 'I'.
30 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
32 * Makefile.in (INSTALL): Use top level install.sh script.
34 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
36 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
37 that it works on a little endian host.
39 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
41 * configure.in: Use ${config_shell} when running config.bfd.
43 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
45 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
47 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
49 * a29k-dis.c (print_insn): Print the opcode.
51 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
53 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
55 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
57 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
59 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
61 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
62 which store a value into memory.
64 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
66 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
67 * arm-dis.c, arm-opc.h: New files.
69 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
71 * Makefile.in (ns32k-dis.o): Add dependency.
72 * ns32k-dis.c (print_insn_arg): Declare initialized local as
73 string, not as array of chars.
75 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
77 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
79 * sparc-opc.c: Added sparclite extended FP operations, and
80 versions of v9 impdep* instructions permitting specification of
83 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
85 * i960-dis.c (reg_names): Now const.
86 (struct sparse_tabent): New type, copied from array type in mem
88 (ctrl): Local static array ctrl_tab now const.
89 (cobr): Local static array cobr_tab now const.
90 (mem): Local variables reg1, reg2, reg3 now point to const. Local
91 static variable mem_tab no longer explicitly initialized. Changed
92 mem_init to const array of struct sparse_tabent.
93 (reg): Local static variable reg_tab no longer explicitly
94 initialized. Changed reg_init to const array of struct
96 (ea): Local static array scale_tab now const.
99 * i960-dis.c (reg): Added i960XL instructions to reg_init table.
103 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
105 * configure.bat: the disassember needs to be enabled for
106 "objdump -d" to work in djgpp.
108 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
110 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
111 (invalid_float): Enabled general version, doesn't require running
112 on ns32k host. Changed to take char* argument, and test for
113 explicitly specified sizes, instead of using sizeof() on host CPU
115 (INVALID_FLOAT): Cast first argument.
116 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
117 list_P032, list_M032): Now const.
118 (optlist, list_search): Made appropriate arguments now point to
120 (print_insn_arg): Changed static array of one-character-string
121 pointers into a static const array of characters; fixed sprintf
122 statement accordingly.
124 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
126 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
127 from distribution. A ns32k-dis.c from a previous distribution has
128 been brought up to date and supports the new interface.
130 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
132 * configure.in: add bfd_ns32k_arch target support.
134 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
135 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
137 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
139 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
142 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
144 * h8300-dis.c, mips-dis.c: Don't use true and false.
146 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
148 * configure.in: Change --with-targets to --enable-targets.
150 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
152 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
153 opcodes to the first instruction with that opcode, to speed
154 disassembly of large files. From ralphc@pyramid.com (Ralph
157 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
159 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
161 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
163 * configure.bat: update to latest makefile.in
165 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
167 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
168 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
169 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
170 slot insn is in a delay slot.
171 * z8k-opc.h: (resflg): Fix patterns.
172 * h8500-opc.h Fix CR insn patterns.
174 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
176 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
177 "cmpl" before POWER versions, so that gas -many uses them.
179 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
181 * disassemble.c: New file.
182 * Makefile.in (OFILES): Add disassemble.o.
183 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
184 * configure.in: Define ARCHDEFS in Makefile. Code taken from
185 binutils/configure.in.
187 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
188 opcode being examined.
190 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
192 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
193 (insert_ral, insert_ram, insert_ras): New functions.
194 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
195 RAS for store with update.
197 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
199 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
200 (edelsohn@npac.syr.edu).
202 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
204 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
207 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
209 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
211 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
213 * ppc-opc.c (powerpc_operands): The signedp field has been
214 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
215 instead. Add new operand SISIGNOPT.
216 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
217 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
218 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
221 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
223 * i386-dis.c (struct private): Renamed to dis_private. `private'
224 is a reserved word for dynix cc.
226 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
228 * configure.in: Change error message to refer to bfd/config.bfd
229 rather than bfd/configure.in.
231 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
233 * ppc-opc.c: Define POWER2 as short alias flag.
234 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
237 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
239 * i960-dis.c (print_insn_i960): Don't read a second word for
240 opcodes 0, 1, 2 and 3.
242 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
244 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
246 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
248 * m68881-ext.c: Removed; no longer used.
249 * Makefile.in: Changed accordingly.
251 * m68k-dis.c (ext_format_68881): Don't declare.
252 (print_insn_m68k): If an instruction uses place 'i', it uses at
253 least four fixed bytes.
254 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
255 extended float, convert to double using floatformat_to_double, not
256 ieee_extended_to_double, and fetch the data before converting it.
258 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
260 * mips-opc.c: It's sqrt.s, not sqrt.w. From
261 davidj@ICSI.Berkeley.EDU (David Johnson).
263 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
265 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
266 PowerPC uses bdnz[l][a].
268 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
270 * dis-buf.c, i386-dis.c: Include sysdep.h.
272 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
274 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
276 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
277 by Motorola PowerPC 601 with PPC_OPCODE_601.
278 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
279 Disassemble Motorola PowerPC 601 instructions as well as normal
280 PowerPC instructions.
282 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
284 * i960-dis.c (reg, mem): Just use a static array instead of
287 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
289 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
290 condition name index if this is for a negated condition.
292 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
293 Floating point format for 'H' operand is backwards from normal
294 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
295 operands (fmpyadd and fmpysub), handle bizarre register
296 translation correctly for single precision format.
298 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
299 or 'I' operands if the next format specifier is 'M' (fcmp
300 condition completer).
302 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
304 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
305 single number giving a bitmask for the MB and ME fields of an M
306 form instruction. Change NB to accept 32, and turn it into 0;
307 also turn 0 into 32 when disassembling. Seperated SH from NB.
308 (insert_mbe, extract_mbe): New functions.
309 (insert_nb, extract_nb): New functions.
310 (SC_MASK): Mask out SA and LK bits.
311 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
312 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
313 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
314 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
315 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
316 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
317 (powerpc_macros): Define table of macro definitions.
318 (powerpc_num_macros): Define.
320 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
321 if PPC_OPERAND_NEXT is set.
323 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
325 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
326 char. Retrieve contents using bfd_getl32 instead of shifting.
328 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
330 * ppc-opc.c: New file. Opcode table for PowerPC, including
331 opcodes for POWER (RS/6000).
332 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
333 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
334 (CFILES): Add ppc-dis.c.
335 (ppc-dis.o, ppc-opc.o): New targets.
336 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
338 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
340 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
341 No space before 'u', 'f', or 'N'.
343 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
345 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
346 farther than we should.
348 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
350 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
352 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
354 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
356 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
357 needs it, to prevent reading past the end of a section.
359 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
361 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
362 Removed t,A case for la; always use t,A(b) case.
364 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
366 From Ted Lemen <mellon@pepper.ncd.com>
367 * mips-dis.c (print_insn_arg): Handle 'k'.
368 * mips-opc.c: Make cache use k, not t.
370 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
372 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
373 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
374 FLOAT_FORMAT_CODE to put out floating point register names.
376 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
378 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
380 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
382 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
384 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
386 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
387 larger than 32. Moved dsxx32 variants first for disassembler.
389 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
391 * z8kgen.c, z8k-opc.h: Add full lda information.
393 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
395 * hppa-dis.c (print_insn_hppa): Do not emit a space after
396 movb instructions. Any necessary space will be emitted by
397 the code to handle nullification completers.
399 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
401 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
403 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
405 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
406 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
408 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
410 * mips-opc.c: Correct lwu opcode value (book had it wrong).
412 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
414 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
415 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
417 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
419 * m88k-dis.c (m88kdis): comment change. Remove space after
421 (printop): handle new arg types DEC and XREG for m88110.
423 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
425 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
426 type for absolute branch addresses. Delete special
427 "ble" and "be" code in 'W' operand code.
429 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
431 * mips-opc.c: Set hazard information correctly for branch
434 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
436 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
437 info->fprintf_func for printing and info->print_address_func for
440 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
442 * mips-opc.c: Set INSN_TRAP for tXX instructions.
444 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
446 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
447 Corrected second case of "b" for disassembler.
449 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
451 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
452 to BFD swapping routines to correspond to BFD name changes.
454 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
456 * mips-opc.c: Change div machine instruction to be z,s,t rather
457 than s,t. Change div macro to be d,v,t rather than d,s,t.
458 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
459 rem and remu which generates only the corresponding div
460 instruction. This is for compatibility with the MIPS assembler,
461 which only generates the simple machine instruction when an
462 explicit destination of $0 is used.
463 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
465 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
467 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
468 WR_31 hazard for bal, bgezal, bltzal.
470 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
472 * hppa-dis.c (print_insn_hppa): Use print function
473 from within the disassemble_info, not fprintf_filtered.
475 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
477 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
478 Law, law@cs.utah.edu.)
480 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
482 * mips-opc.c ("absu"): Removed.
485 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
487 * mips-opc.c: Added r6000 and r4000 instructions and macros.
488 Changed hazard information to distinguish between memory load
489 delays and coprocessor load delays.
491 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
493 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
495 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
497 * configure.in: Don't pass cpu to config.bfd.
499 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
501 * m88k-dis.c (m88kdis): Make class unsigned.
503 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
505 * alpha-dis.c (print_insn_alpha): One branch format case was
506 missing the instruction name.
508 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
510 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
511 Add the arch-specific auxiliary files.
512 (OFILES): Remove the arch-specific auxiliary files
513 and use BFD_MACHINES instead of DIS_LIBS.
514 * configure.in: Set BFD_MACHINES based on --with-targets option.
516 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
518 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
521 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
523 * sparc-opc.c: Change CONST to const to deal with gcc
524 -Dconst=__const -traditional.
526 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
528 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
529 coprocessor instructions out of #if 0, and made them use new
532 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
534 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
536 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
538 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
539 instruction, for use by the disassembler.
541 * sparc-dis.c (SEX): Add sign extension macro. Replace many
542 hand-coded sign extensions that depended on 32-bit host ints.
543 FIXME, we still depend on big-endian host bitfield ordering.
544 (sparc_print_insn): Set the insn_info_valid field, and the
545 other fields that describe the instruction being printed.
547 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
549 * sparc-opc.c (call): Accept all 6 addressing modes valid for
550 `jmp' instead of just one of them.
552 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
554 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
555 (fput_fp_reg_r): Renamed from fput_reg_r.
556 (fput_fp_reg): New function.
557 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
559 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
561 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
563 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
565 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
567 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
568 don't output a space.
570 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
572 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
574 * mips-opc.c: New file, containing opcode table from
575 ../include/opcode/mips.h.
576 * Makefile.in: Add it.
578 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
580 * m88k-dis.c: New file, moved in from gdb and changed to use the
581 new dis-asm.h disassembler interface.
582 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
583 (m88k-dis.o): New target.
585 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
587 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
588 argument string const char * to correspond to opcode/mips.h.
590 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
592 * mips-dis.c: Updated to account for name changes in new version
594 * Makefile.in: Added header file dependencies.
596 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
598 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
600 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
602 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
603 extend, rather than shifts.
605 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
607 * Makefile.in: Undo 15 June change.
609 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
611 * m68k-dis.c (print_insn_arg): Change return value to byte count
613 * m68k-dis.c: Re-write to detect invalid operands before
614 printing anything, so we can handle this the same way we
615 handle invalid opcodes.
617 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
619 * sh-dis.c, sh-opc.h: Understand some more opcodes.
621 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
623 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
626 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
628 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
630 * configure.in: Do make sysdep.h link.
631 * Makefile.in: Search ../include. Don't search ../bfd.
633 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
635 Changes from Jeff Law, law@cs.utah.edu:
636 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
637 Do not print a space before the completers specified by
640 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
642 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
643 defined, since gdb has been fixed.
645 Changes from Jeff Law, law@cs.utah.edu:
646 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
647 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
648 be a *disassemble_info, not a *FILE.
649 * hppa-dis.c: Support 'd', '!', and 'a'.
650 * hppa-dis.c: Support 's' to extract a 2 bit space register.
651 * hppa-dis.c: Delete cases which are no longer needed.
653 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
655 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
657 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
659 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
662 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
664 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
665 * configure.in: No longer need to configure to get sysdep.h.
667 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
669 * Patches from Jeffrey Law <law@cs.utah.edu>.
670 * hppa-dis.c: Support 'I', 'J', and 'K' in output
671 templates for 1.1 FP computational instructions.
673 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
675 * h8500-dis.c (print_insn_h8500): Address argument is type
677 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
680 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
681 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
683 * sparc-dis.c (compare_opcodes): Move static declaration to
686 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
688 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
689 instruction, remove unimp hack from 'l' argument.
691 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
693 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
696 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
698 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
699 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
702 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
704 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
705 arrays of string pointers to 2-d arrays of chars, to save
708 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
710 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
711 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
713 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
715 * hppa-dis.c: New file from Utah, adapted to new disassembler
717 * Makefile.in: Include it.
719 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
721 * sh-dis.c, sh-opc.h: New files.
723 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
725 * alpha-dis.c, alpha-opc.h: New files.
727 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
729 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
732 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
734 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
736 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
738 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
741 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
743 * sparc-dis.c: Use fprintf_func a few places where I forgot,
744 and double percent signs a few places.
746 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
748 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
749 Use info->print_address_func not print_address.
751 * dis-buf.c (generic_print_address): New function.
753 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
755 * Makefile.in: Add sparc-dis.c.
756 sparc-dis.c: New file, merges binutils and gdb versions as follows:
758 Add `add' instruction to the set that get checked
759 for a preceding `sethi' in order to print an absolute address.
760 * (print_insn): Disassembly prefers real instructions.
761 (is_delayed_branch): Speed up.
762 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
763 Still missing some float ops, and needs testing.
764 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
765 F_ALIAS. Use printf, not fprintf, when not passing a file
767 (compare_opcodes): Check that identical instructions have
768 identical opcodes, complain otherwise.
773 Use dis-asm.h/read_memory_func interface.
775 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
777 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
778 deliberately return non-zero to setjmp from longjmp. Otherwise
779 this code fails to compile.
781 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
783 * m68k-dis.c: Fix prototype for fetch_arg().
785 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
787 * dis-buf.c: New file, for new read_memory_func interface.
788 Makefile.in (OFILES): Include it.
789 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
790 Use new read_memory_func interface.
792 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
794 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
795 * h8500-opc.h: Fix couple of opcodes.
797 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
799 * Makefile.in: add dvi & installcheck targets
801 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
803 * Makefile.in: Update for h8500-dis.c.
805 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
807 * h8500-dis.c, h8500-opc.h: New files
809 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
811 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
812 ../include/dis-asm.h.
813 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
814 and ../gdb/m68k-pinsn.c).
815 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
816 and ../gdb/i386-pinsn.c).
817 * m68881-ext.c: New file. Moved definition of
818 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
819 * Makefile.in: Adjust for new files.
820 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
821 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
822 can be dis-assembled.
824 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
826 * mips-dis.c (print_insn_arg): Now returns void.
828 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
830 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
831 files that use the macros.
833 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
835 * mips-dis.c: New file, from gdb/mips-pinsn.c.
836 * Makefile.in (DIS_LIBS): Added mips-dis.o.
837 (CFILES): Added mips-dis.c.
839 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
841 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
842 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
844 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
846 * Makefile.in: Improve *clean rules.
847 * configure.in: Allow a default host.
849 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
851 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
852 files include other sysdep files
854 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
856 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
858 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
860 * configure.in: For host support, use ../bfd/configure.host
861 so it stays in sync with the ../bfd/hosts database.
863 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
865 * configure.in: use cpu-vendor-os triple instead of nested cases
867 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
869 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
870 *always* the wrong one.
872 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
874 * z8kgen.c: added copyright info
876 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
878 * z8k-dis.c (unparse_instr): prettier tabs
879 * z8kgen.c -> z8k-opc.h: bug fixes in tables
881 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
883 * configure.in: Add ncr* configuration.
884 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
885 picayune ANSI compilers happy.
887 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
889 * configure.in (i386): Make i386 and i486 synonymous for now.
890 * configure.in (i[34]86-*-sysv4): Add my_host definition.
892 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
894 * Makefile.in (install): Fix typo.
896 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
898 * Makefile.in (make): Remove obsolete crud.
899 (sparc-opc.o): Avoid Sun Make VPATH bug.
901 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
903 * Makefile.in: since there are no SUBDIRS, remove rule and
904 references of subdir_do.
906 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
908 * Makefile.in (install): Get the library name right here too.
909 Don't install bfd.h, since it's unrelated to this library. No
910 subdirs to recurse into, either.
911 (CFILES): The source file has a .c suffix, not .o.
913 * sparc-opc.c: New file, moved from BFD.
914 * Makefile.in (OFILES): Build it.
916 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
918 * z8k-dis.c: fixed forward refferences of some declarations.
920 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
922 * Makefile.in: get the name of the library right
924 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
926 * z8k-dis.c: knows how to disassemble z8k stuff
927 * z8k-opc.h: new file full of z8000 opcodes
931 version-control: never