1 2009-04-15 Jan Beulich <jbeulich@novell.com>
3 * i386-opc.tbl (protb, protw, protd, protq): Set opcode
5 (pshab, pshaw, pshad, pshaq): Likewise.
6 * i386-tbl.h: Re-generate.
8 2009-04-07 Peter Bergner <bergner@vnet.ibm.com>
10 * ppc-opc.c (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva",
11 "tlbilx">: Use secondary opcode "18" as per the ISA 2.06 documentation.
12 Reorder entries so the extended mnemonics are listed before tlbilx.
14 2009-04-02 Peter Bergner <bergner@vnet.ibm.com>
16 * ppc-dis.c (powerpc_init_dialect): Do not choose a default dialect
18 (print_insn_powerpc): Make sure we only deprecate instructions using
19 the original dialect and not a modified dialect due to -Many handling.
20 Move the handling of the condition register and default operands to
21 the end of the if/else if/else chain.
22 * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
23 instructions from newer processors are listed before older ones.
24 <"icblce", "sync", "eieio", "tlbld">: Deprecate for processors
25 that have instructions with conflicting opcodes.
27 2009-04-01 Peter Bergner <bergner@vnet.ibm.com>
29 * ppc-opc.c (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and
32 2009-04-01 Christophe Lyon <christophe.lyon@st.com>
34 * arm-dis.c (print_insn): Print BE8 opcodes in little endianness.
36 2009-03-30 Joseph Myers <joseph@codesourcery.com>
38 * arm-dis.c (print_insn): Also check section matches in backwards
39 search for mapping symbol.
41 2009-03-26 H.J. Lu <hongjiu.lu@intel.com>
43 * i386-dis.c (get_valid_dis386): Abort on unhandled table.
45 2009-03-18 Alan Modra <amodra@bigpond.net.au>
47 * cgen-opc.c: Include alloca-conf.h rather than alloca.h.
48 * Makefile.am: Run "make dep-am".
49 * Makefile.in: Regenerate.
50 * openrisc-opc.c: Regenerate.
52 2009-03-10 Nick Clifton <nickc@redhat.com>
54 * po/id.po: Updated Indonesian translation.
56 2009-03-10 Alan Modra <amodra@bigpond.net.au>
58 * ppc-dis.c: Include "opintl.h".
59 (struct ppc_mopt, ppc_opts): New.
60 (ppc_parse_cpu): New function.
61 (powerpc_init_dialect): Use it.
62 (print_ppc_disassembler_options): Dump options from ppc_opts.
63 Internationalize message.
65 2009-03-06 Nick Clifton <nickc@redhat.com>
67 * po/es.po: Updated Spanish translation.
69 2009-03-04 Alan Modra <amodra@bigpond.net.au>
72 * configure.in: Test for ld --as-needed support. Link shared
73 libopcodes against libm.
74 * configure: Regenerate.
76 2009-03-03 Peter Bergner <bergner@vnet.ibm.com>
78 * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
79 instructions from newer processors are listed before older ones.
81 2009-03-03 Alan Modra <amodra@bigpond.net.au>
83 * Makefile.am: Run "make dep-am".
84 (HFILES): Move lm32-desc.h and lm32-opc.h from..
86 * Makefile.in: Regenerate.
88 2009-03-02 Qinwei <qinwei@sunnorth.com.cn>
90 * score7-dis.c: New file.
91 * Makefile.am: Add dependencies for score7-dis.c.
92 * Makefile.in: Regenerate.
93 * configure.in: Add score7-dis to score files.
94 * configure: Regenerate.
95 * score-dis.c: Add support for score7 architecture.
96 * score-opc.h: Likewise.
98 2009-03-01 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
100 * configure: Regenerate.
102 2009-02-27 H.J. Lu <hongjiu.lu@intel.com>
104 * i386-dis.c (OP_EX): Call OP_E_memory instead of OP_E.
106 2009-02-26 Peter Bergner <bergner@vnet.ibm.com>
108 * ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble
109 the power7 and the isel instructions.
110 * ppc-opc.c (insert_xc6, extract_xc6): New static functions.
111 (insert_dm, extract_dm): Likewise.
112 (XB6): Update comment to include XX2 form.
113 (WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK,
114 XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New.
115 (RemoveXX3DM): Delete.
116 (powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr",
117 "mftgpr">: Deprecate for POWER7.
118 <"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte",
119 "frsqrte.">: Deprecate the three operand form and enable the two
120 operand form for POWER7 and later.
121 <"wait">: Extend to accept optional parameter. Enable for POWER7.
122 <"waitsrv", "waitimpl">: Add extended opcodes.
123 <"ldbrx", "stdbrx">: Enable for POWER7.
124 <"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes.
125 <"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde",
126 "divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo",
127 "divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.",
128 "divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.",
129 "fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.",
130 "fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx",
131 "lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes.
132 <"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx",
133 "stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp",
134 "xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds",
135 "xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp",
136 "xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp",
137 "xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp",
138 "xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic",
139 "xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp",
140 "xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp",
141 "xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp",
142 "xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.",
143 "xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp",
144 "xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp",
145 "xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp",
146 "xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp",
147 "xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp",
148 "xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp",
149 "xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp",
150 "xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp",
151 "xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp",
152 "xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi",
153 "xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp",
154 "xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp",
155 "xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp",
156 "xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor",
157 "xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd",
158 "xxspltw", "xxswapd">: Add VSX opcodes.
160 2009-02-23 H.J. Lu <hongjiu.lu@intel.com>
162 * i386-gen.c (operand_type_init): Remove OPERAND_TYPE_VEX_IMM4.
163 (operand_types): Remove Vex_Imm4.
165 * i386-opc.h (Vex_Imm4): Removed.
167 (i386_operand_type): Remove vex_imm4.
169 * i386-opc.tbl: Remove Vex_Imm4 comments.
170 * i386-init.h: Regenerated.
171 * i386-tbl.h: Likewise.
173 2009-02-23 Richard Earnshaw <rearnsha@arm.com>
175 * arm-dis.c (neon_opcodes): Correct bit-mask and patterns for
176 vq{r}shr{u}n.s64 insnstructions.
178 2009-02-19 Peter Bergner <bergner@vnet.ibm.com>
180 * ppc-opc.c (powerpc_opcodes) <"lfdepx", "stfdepx">: Fix the first
181 operand to be a float point register (FRT/FRS).
183 2009-02-18 Adam Nemet <anemet@caviumnetworks.com>
185 * mips-opc.c (mips_builtin_opcodes): Move the Octeon-specific
186 dmfc2 and dmtc2 before the architecture-level variants.
188 2009-02-18 Pierre Muller <muller@ics.u-strasbg.fr>
190 * fr30-opc.c: Regenerate.
191 * frv-opc.c: Regenerate.
192 * ip2k-opc.c: Regenerate.
193 * iq2000-opc.c: Regenerate.
194 * lm32-opc.c: Regenerate.
195 * m32c-opc.c: Regenerate.
196 * m32r-opc.c: Regenerate.
197 * mep-opc.c: Regenerate.
198 * mt-opc.c: Regenerate.
199 * xc16x-opc.c: Regenerate.
200 * xstormy16-opc.c: Regenerate.
201 * tic54x-dis.c (print_instruction): Avoid compiler warning on
204 2009-02-12 Nathan Sidwell <nathan@codesourcery.com>
206 * m68k-opc.c (m68k_opcodes): Add stldsr instruction.
208 2009-02-05 Peter Bergner <bergner@vnet.ibm.com>
210 * ppc-opc.c: Update copyright year.
211 (powerpc_opcodes) <"dcbt", "dcbtst">: Deprecate the Embedded operand
212 ordering for POWER4 and later and use the correct Server ordering.
214 2009-02-04 H.J. Lu <hongjiu.lu@intel.com>
216 AVX Programming Reference (January, 2009)
217 * i386-dis.c (PREFIX_VEX_3A44): New.
218 (VEX_LEN_3A44_P_2): Likewise.
219 (PREFIX_VEX_3A48): Updated.
220 (VEX_LEN_3A4C_P_2): Likewise.
221 (prefix_table): Add PREFIX_VEX_3A44.
222 (vex_table): Likewise.
223 (vex_len_table): Add VEX_LEN_3A44_P_2.
225 * i386-opc.tbl: Add PCLMUL + AVX instructions.
226 * i386-tbl.h: Regenerated.
228 2009-02-03 Sandip Matte <sandip@rmicorp.com>
230 * mips-dis.c (mips_cp0_names_xlr, mips_cp0sel_names_xlr): Define.
231 (mips_arch_choices): Add XLR entry.
232 * mips-opc.c (XLR): Define.
233 (mips_builtin_opcodes): Add XLR instructions.
235 2009-02-03 Carlos O'Donell <carlos@codesourcery.com>
237 * Makefile.am: Add install-pdf target.
238 * po/Make-in: Add install-pdf target.
239 * Makefile.in: Regenerate.
241 2009-02-02 DJ Delorie <dj@redhat.com>
243 * mep-asm.c: Regenerate.
244 * mep-desc.c: Regenerate.
245 * mep-desc.h: Regenerate.
246 * mep-dis.c: Regenerate.
247 * mep-ibld.c: Regenerate.
248 * mep-opc.c: Regenerate.
249 * mep-opc.h: Regenerate.
251 2009-01-29 Mark Mitchell <mark@codesourcery.com>
253 * arm-dis.c (thumb32_opcodes): Correct decoding for qadd, qdadd,
256 2009-01-28 Chao-ying Fu <fu@mips.com>
258 * mips-opc.c (suxc1): Add the flag of FP_D.
260 2009-01-20 Alan Modra <amodra@bigpond.net.au>
262 * fr30-asm.c, fr30-dis.c, fr30-ibld.c, frv-asm.c, frv-dis.c,
263 * frv-ibld.c, ip2k-asm.c, ip2k-dis.c, ip2k-ibld.c,
264 * iq2000-asm.c, iq2000-dis.c, iq2000-ibld.c, m32c-asm.c,
265 * m32c-dis.c, m32c-ibld.c, m32r-asm.c, m32r-dis.c,
266 * m32r-ibld.c, mep-asm.c, mep-dis.c, mep-ibld.c, mt-asm.c,
267 * mt-dis.c, mt-ibld.c, openrisc-asm.c, openrisc-dis.c,
268 * openrisc-ibld.c, xc16x-asm.c, xc16x-dis.c, xc16x-ibld.c,
269 * xstormy16-asm.c, xstormy16-dis.c, xstormy16-ibld.c: Regenerate.
271 2009-01-16 Alan Modra <amodra@bigpond.net.au>
273 * configure.in (commonbfdlib): Delete.
274 (SHARED_LIBADD): Add pic libiberty if such is available.
275 * configure: Regenerate.
276 * po/POTFILES.in: Regenerate.
278 2009-01-14 Peter Bergner <bergner@vnet.ibm.com>
280 * ppc-dis.c (print_insn_powerpc): Skip insn if it is deprecated.
281 * ppc-opc.c (powerpc_opcodes) <mtfsf, mtfsf.>: Deprecate the two
282 operand form and enable the four operand form for POWER6 and later.
283 <mtfsfi, mtfsfi.>: Deprecate the two operand form and enable the
284 three operand form for POWER6 and later.
286 2009-01-14 Mike Frysinger <vapier@gentoo.org>
288 * bfin-dis.c (OUTS): Use "%s" as format string.
290 2009-01-13 H.J. Lu <hongjiu.lu@intel.com>
292 * i386-gen.c (cpu_flag_init): Remove a white space.
293 (operand_type_init): Likewise.
295 2009-01-12 H.J. Lu <hongjiu.lu@intel.com>
297 * i386-opc.tbl: Add NoAVX to movnti, lfence and mfence.
298 * i386-tbl.h: Regenerated.
300 2009-01-12 H.J. Lu <hongjiu.lu@intel.com>
302 * i386-dis.c (dis386): Use EbS on addB, orB, adcB, sbbB, andB,
303 subB, xorB and cmpB. Use EvS on addS, orS, adcS, sbbS, andS,
306 2009-01-10 H.J. Lu <hongjiu.lu@intel.com>
308 * i386-gen.c (cpu_flag_init): Replace CpuP4 and CpuK6 with
309 CpuClflush and CpuSYSCALL, respectively. Remove CpuK8. Add
310 CPU_COREI7_FLAGS, CPU_CLFLUSH_FLAGS and CPU_SYSCALL_FLAGS.
311 (cpu_flags): Remove CpuP4, CpuK6 and CpuK8. Add CpuClflush
314 (set_bitfield): Take an argument, lineno. Don't report lineno
315 on error if it is -1.
316 (process_i386_cpu_flag): Take an argument, lineno.
317 (process_i386_opcode_modifier): Likewise.
318 (process_i386_operand_type): Likewise.
319 (output_i386_opcode): Likewise.
320 (opcode_hash_entry): Add lineno.
321 (process_i386_opcodes): Updated.
322 (process_i386_registers): Likewise.
323 (process_i386_initializers): Likewise.
325 * i386-opc.h (CpuP4): Removed.
329 (CpuSYSCALL): Likewise.
331 (i386_cpu_flags): Remove cpup4, cpuk6 and cpuk8. Add
332 cpuclflush and cpusyscall.
334 * i386-opc.tbl: Update movnti, clflush, lfence, mfence, pause,
336 * i386-init.h: Regenerated.
337 * i386-tbl.h: Likewise.
339 2009-01-09 H.J. Lu <hongjiu.lu@intel.com>
341 * i386-gen.c (cpu_flag_init): Add CpuRdtscp to CPU_K8_FLAGS
342 and CPU_AMDFAM10_FLAGS. Add CPU_RDTSCP_FLAGS.
343 (cpu_flags): Add CpuRdtscp.
344 (set_bitfield): Remove CpuSledgehammer check.
346 * i386-opc.h (CpuRdtscp): New.
348 (i386_cpu_flags): Add cpurdtscp.
350 * i386-opc.tbl: Replace CpuSledgehammer with CpuRdtscp.
351 * i386-init.h: Regenerated.
352 * i386-tbl.h: Likewise.
354 2009-01-09 Peter Bergner <bergner@vnet.ibm.com>
356 * ppc-opc.c (PPCNONE): Define.
358 (powerpc_opcodes): Initialize the new "deprecated" field.
360 2009-01-06 H.J. Lu <hongjiu.lu@intel.com>
362 AVX Programming Reference (December, 2008)
363 * i386-dis.c (VEX_LEN_2B_M_0): Removed.
364 (VEX_LEN_E7_P_2_M_0): Likewise.
365 (VEX_LEN_2C_P_1): Updated.
366 (VEX_LEN_E8_P_2): Likewise.
367 (vex_len_table): Remove VEX_LEN_2B_M_0 and VEX_LEN_E7_P_2_M_0.
368 (mod_table): Likewise.
370 * i386-opc.tbl: Add 256bit vmovntdq, vmovntpd and vmovntps.
371 * i386-tbl.h: Regenerated.
373 2009-01-05 H.J. Lu <hongjiu.lu@intel.com>
375 * i386-gen.c (process_copyright): Update for 2009.
377 * i386-init.h: Regenerated.
378 * i386-tbl.h: Likewise.
380 2009-01-05 H.J. Lu <hongjiu.lu@intel.com>
382 AVX Programming Reference (December, 2008)
383 * i386-dis.c (OP_VEX_FMA): Removed.
384 (OP_EX_VexW): Likewise.
385 (OP_EX_VexImmW): Likewise.
386 (OP_XMM_VexW): Likewise.
387 (VEXI4_Fixup): Likewise.
388 (VPERMIL2_Fixup): Likewise.
391 (Vex128FMA): Likewise.
395 (EXVexImmW): Likewise.
397 (VPERMIL2): Likewise.
398 (PREFIX_VEX_3A48...PREFIX_VEX_3A4A): Likewise.
399 (PREFIX_VEX_3A5C...PREFIX_VEX_3A5F): Likewise.
400 (PREFIX_VEX_3A68...PREFIX_VEX_3A6F): Likewise.
401 (PREFIX_VEX_3A78...PREFIX_VEX_3A7F): Likewise.
402 (VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2): Likewise.
403 (VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2): Likewise.
404 (get_vex_imm8): Likewise.
405 (OP_EX_VexReg): Likewise.
406 vpermil2_op): Likewise.
408 (vex_w_dq_mode): Likewise.
409 (PREFIX_VEX_3896...PREFIX_VEX_389F): Likewise.
410 (PREFIX_VEX_38A6...PREFIX_VEX_38AF): Likewise.
411 (PREFIX_VEX_38B6...PREFIX_VEX_38BF): Likewise.
413 (PREFIX_VEX_38DB): Likewise.
414 (PREFIX_VEX_3A4A): Likewise.
415 (PREFIX_VEX_3A60): Likewise.
416 (PREFIX_VEX_3ADF): Likewise.
417 (VEX_LEN_3ADF_P_2): Likewise.
418 (prefix_table): Remove PREFIX_VEX_3A48...PREFIX_VEX_3A4A,
419 PREFIX_VEX_3A5C...PREFIX_VEX_3A5F,
420 PREFIX_VEX_3A68...PREFIX_VEX_3A6F and
421 PREFIX_VEX_3A78...PREFIX_VEX_3A7F. Add
422 PREFIX_VEX_3896...PREFIX_VEX_389F,
423 PREFIX_VEX_38A6...PREFIX_VEX_38AF and
424 PREFIX_VEX_38B6...PREFIX_VEX_38BF.
425 (vex_table): Likewise.
426 (vex_len_table): Remove VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2
427 and VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2.
428 (putop): Support "%XW".
429 (intel_operand_size): Handle vex_w_dq_mode.
431 * i386-opc.h (VexNDS): Add a comment for VEX NDS and VEX DDS.
433 * i386-opc.tbl: Remove vpermil2pd/vpermil2ps and old FMA
434 instructions. Add new FMA instructions.
435 * i386-tbl.h: Regenerated.
437 2009-01-02 Matthias Klose <doko@ubuntu.com>
439 * or32-opc.c (or32_print_register, or32_print_immediate,
440 disassemble_insn): Don't rely on undefined sprintf behaviour.
442 For older changes see ChangeLog-2008
448 version-control: never