1 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
3 * Makefile.am (install-pdf, install-html): Remove.
4 * Makefile.in: Regenerate.
6 * Makefile.in: Regenerate.
7 * aclocal.m4: Likewise.
11 2009-08-06 Michael Eager <eager@eagercon.com>
13 * Makefile.am: Add microblaze-opc.h to HFILES, microblaze-dis.c to
14 CFILES, microblaze-dis.lo to ALL_MACHINES, targets.
15 * Makefile.in: Regenerate.
16 * configure.in: Add bfd_microblaze_arch target.
17 * configure: Regenerate.
18 * disassemble.c: Define ARCH_microblaze, return
19 print_insn_microblaze().
20 * microblaze-dis.c: New MicroBlaze disassembler.
21 * microblaze-opc.h: New MicroBlaze opcode definitions.
22 * microblaze-opcm.h: New MicroBlaze opcode types.
24 2009-07-25 H.J. Lu <hongjiu.lu@intel.com>
26 * configure.in: Handle bfd_l1om_arch.
27 * disassemble.c (disassembler): Likewise.
29 * configure: Regenerated.
31 * i386-dis.c (print_insn): Handle bfd_mach_l1om and
32 bfd_mach_l1om_intel_syntax. Use 8 bytes per line for Intel L1OM.
34 * i386-gen.c (cpu_flag_init): Set CPU_UNKNOWN_FLAGS to ~CpuL1OM.
36 (cpu_flags): Add CpuL1OM.
37 (set_bitfield): Take an argument to set the value field.
38 (process_i386_cpu_flag): Support ~CpuXXX and ~(CpuXXX|CpuYYY).
39 (process_i386_opcode_modifier): Updated.
40 (process_i386_operand_type): Likewise.
41 * i386-init.h: Regenerated.
42 * i386-tbl.h: Likewise.
44 * i386-opc.h (CpuL1OM): New.
46 (i386_cpu_flags): Add cpul1om.
48 2009-07-24 Jan Beulich <jbeulich@novell.com>
50 * i386-dis.c (fgrps): Correct annotation for feni/fdisi. Add
52 * i386-gen.c (cpu_flag_init): Add FP enabling flags where needed.
53 (cpu_flags): Add Cpu8087, Cpu287, Cpu387, Cpu687, and CpuFISTTP.
54 (set_bitfield): Expand CpuFP to Cpu8087|Cpu287|Cpu387.
55 * i386-opc.h (Cpu8087, Cpu287, Cpu387, Cpu687, CpuFISTTP):
57 (union i386_cpu_flags): Add cpu8087, cpu287, cpu387, cpu687,
59 * i386-opc.tbl: Qualify floating point instructions by their
60 respective CpuXXX flag. Fix fucom{,p,pp}, fprem1, fsin, fcos,
61 and fsincos to be avilable only on 387. Fix fstsw ax to be
62 available only on 287+. Add f{,n}eni, f{,n}disi, f{,n}setpm,
64 * i386-init.h, i386-tbl.h: Regenerate.
66 2009-07-20 Nick Clifton <nickc@redhat.com>
69 * arm-dis.c (arm_opcodes): Catch non-zero bits 8-11 in register
70 offset or indexed based addressing mode 3.
72 2009-07-14 Nick Clifton <nickc@redhat.com>
75 * arm-dis.c (arm_opcodes): Catch illegal Addressing Mode 1
77 (arm_decode_shift): Catch illegal register based shifts.
78 (print_insn_arm): Properly handle negative register r0
79 post-indexed addressing.
81 2009-07-10 Doug Kwan <dougkwan@google.com>
83 * arm-disc.c (print_insn_coprocessor, print_insn_arm): Print only
84 lower 32 bits of long types to make hexadecimal output consistent
85 on both 32-bit and 64-bit hosts.
87 2009-07-10 Alan Modra <amodra@bigpond.net.au>
89 * fr30-desc.c, * fr30-desc.h, * fr30-opc.c, * fr30-opc.h,
90 * frv-desc.c, * frv-desc.h, * frv-opc.c, * frv-opc.h,
91 * ip2k-desc.c, * ip2k-desc.h, * ip2k-opc.c, * ip2k-opc.h,
92 * iq2000-desc.c, * iq2000-desc.h, * iq2000-opc.c, * iq2000-opc.h,
93 * lm32-desc.c, * lm32-desc.h, * lm32-opc.c, * lm32-opc.h,
94 * lm32-opinst.c, * m32c-desc.c, * m32c-desc.h, * m32c-opc.c,
95 * m32c-opc.h, * m32r-desc.c, * m32r-desc.h, * m32r-opc.c,
96 * m32r-opc.h, * m32r-opinst.c, * mt-desc.c, * mt-desc.h,
97 * mt-opc.c, * mt-opc.h, * openrisc-desc.c, * openrisc-desc.h,
98 * openrisc-opc.c, * openrisc-opc.h, * xc16x-desc.c, * xc16x-desc.h,
99 * xc16x-opc.c, * xc16x-opc.h, * xstormy16-desc.c, * xstormy16-desc.h,
100 * xstormy16-opc.c, * xstormy16-opc.h: Regenerate.
102 2009-07-07 Chung-Lin Tang <cltang@pllab.cs.nthu.edu.tw>
104 * arm-dis.c (coprocessor_opcodes): Fix mask for waddbhus.
106 2009-07-07 Nick Clifton <nickc@redhat.com>
109 * arm-dis.c (arm_opcodes): Be more strict about decoding scaled
112 2009-07-06 DJ Delorie <dj@redhat.com>
114 * mep-desc.c: Regenerate.
115 * mep-desc.h: Regenerate.
116 * mep-opc.c: Regenerate.
117 * mep-opc.h: Regenerate.
119 2009-07-06 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
121 * i386-opc.h (CpuFMA4): Add CpuFMA4.
122 (i386_cpu_flags): New.
123 * i386-gen.c: Add CPU_FMA4_FLAGS.
124 * i386-opc.tbl: Add FMA4 instructions.
125 * i386-tbl.h: Regenerate.
126 * i386-init.h: Regenerate.
127 * i386-dis.c (OP_VEX_FMA): New. Handle FMA4.
128 (OP_XMM_VexW): Ditto.
130 (VEXI4_Fixup): Ditto.
131 (VexI4, VexFMA, Vex128FMA, EXVexW, EXdVexW, XMVexW): New Macros.
132 (PREFIX_VEX_3A5C, PREFIX_VEX_3A5D, PREFIX_VEX_3A5E): New.
133 (PREFIX_VEX_3A5F, PREFIX_VEX_3A60): New.
134 (PREFIX_VEX_3A68, PREFIX_VEX_3A69, PREFIX_VEX_3A6A): New.
135 (PREFIX_VEX_3A6B, PREFIX_VEX_3A6C, PREFIX_VEX_3A6D): New.
136 (PREFIX_VEX_3A6E, PREFIX_VEX_3A6F, PREFIX_VEX_3A7A): New.
137 (PREFIX_VEX_3A7B, PREFIX_VEX_3A7C, PREFIX_VEX_3A7D): New.
138 (PREFIX_VEX_3A7E, PREFIX_VEX_3A7F): New.
139 (VEX_LEN_3A6A_P_2,VEX_LEN_3A6B_P_2, VEX_LEN_3A6E_P_2): New.
140 (VEX_LEN_3A6F_P_2,VEX_LEN_3A7A_P_2, VEX_LEN_3A7B_P_2): New.
141 (VEX_LEN_3A7E_P_2,VEX_LEN_3A7F_P_2): New.
142 (get_vex_imm8): New. handle FMA4.
143 (OP_EX_VexReg): Ditto.
145 2009-06-30 Nick Clifton <nickc@redhat.com>
148 * arm-dis.c (coprocessor): Print the LDC and STC versions of the
149 LFM and SFM instructions as comments,.
150 Improve consistency of formatting for instructions displayed as
151 comments and decimal values displayed with their hexadecimal
155 2009-06-29 Nick Clifton <nickc@redhat.com>
158 * arm-dis.c (enum opcode_sentinels): New: Used to mark the
159 boundary between variaant and generic coprocessor instuctions.
160 (coprocessor): Use it.
161 Fix architecture version of MCRR and MRRC instructions.
162 (arm_opcdes): Fix patterns for STRB and STRH instructions.
163 (print_insn_coprocessor): Check architecture and extension masks.
164 Print a hexadecimal version of any decimal constant that is
165 outside of the range of -16 to +32.
166 (print_arm_address): Add a return value of the offset used in the
167 adress, if it is worth printing a hexadecimal version of it.
168 (print_insn_neon): Print a hexadecimal version of any decimal
169 constant that is outside of the range of -16 to +32.
170 (print_insn_arm): Likewise.
171 (print_insn_thumb16): Likewise.
172 (print_insn_thumb32): Likewise.
175 * arm-dis.c (UNDEFINED_INSTRUCTION): New macro for a description
176 of an undefined instruction.
177 (arm_opcodes): Use it.
178 (thumb_opcod): Use it.
179 (thumb32_opc): Use it.
181 2009-06-23 DJ Delorie <dj@redhat.com>
183 * mep-desc.c: Regenerate.
184 * mep-desc.h: Regenerate.
185 * mep-dis.c: Regenerate.
186 * mep-ibld.c: Regenerate.
187 * mep-opc.c: Regenerate.
189 * mep-asm.c: Regenerate.
190 * mep-opc.c: Regenerate.
191 * mep-opc.h: Regenerate.
193 2009-06-22 Nick Clifton <nickc@redhat.com>
195 * po/fi.po: Updated Finish translation.
197 2009-06-22 Alan Modra <amodra@bigpond.net.au>
199 * m32c-asm.c: Regenerate.
201 2009-06-22 Alan Modra <amodra@bigpond.net.au>
203 * score-dis.c (print_insn_score48, print_insn_score32): Move default
204 case label to proper lexical block.
205 * score7-dis.c (print_insn_score32): Likewise.
207 2009-06-19 Martin Schwidefsky <sschwidefsky@de.ibm.com>
209 * s390-opc.c (INSTR_RR_0R_OPT, INSTR_RX_0RRD_OPT, MASK_RR_0R_OPT,
210 MASK_RX_0RRD_OPT): New instruction formats with optional arguments.
211 * s390-opc.txt (nopr, nop): Use new instruction format.
213 2009-06-18 Nick Clifton <nickc@redhat.com>
216 * arm-dis.c (print_insn_coprocessor): Check that a user specified
217 ARM architecture supports the matched instruction.
218 (print_insn_arm): Likewise.
219 (select_arm_features): New function. Fills in the fields of an
220 arm_feature_set structure based on a given arm machine number.
221 (print_insn): Initialise an arm_feature_set structure.
223 2009-06-16 Maciej W. Rozycki <macro@linux-mips.org>
225 * vax-dis.c (is_function_entry): Return success for synthetic
227 (is_plt_tail): New function.
228 (print_insn_vax): Decode PLT entry offset longword.
230 2009-06-15 Nick Clifton <nickc@redhat.com>
233 * arm-dis.c (thumb32_opcodes): Fix binary value of SEV.W
237 * cr16-dis.c (print_arg): Avoid printing the 0x prefix twice.
239 2009-06-15 Nick Clifton <nickc@redhat.com>
242 * arm-dis.c (print_insn): Ignore is_data if the user has requested
243 the disassembly of data as well as instructions.
245 2009-06-11 Doug Evans <dje@sebabeach.org>
247 * cgen.sh: Handle multiple simultaneous runs for parallel makes.
249 2009-06-11 Anthony Green <green@moxielogic.com>
251 * moxie-opc.c (moxie_form1_opc_info): Remove branch instructions.
252 (moxie_form3_opc_info): Add branch instructions.
253 * moxie-dis.c (print_insn_moxie): Disassemble MOXIE_F3_PCREL
254 encoded instructions.
256 2009-06-06 Anthony Green <green@moxielogic.com>
258 * moxie-opc.c: Recode some MOXIE_F1_4 opcodes as MOXIE_F1_M.
259 * moxie-dis.c (print_insn_moxie): Handle MOXIE_F1_M case.
261 2009-06-04 Alan Modra <amodra@bigpond.net.au>
263 * dep-in.sed: Don't use \n in replacement part of s command.
264 * Makefile.am (DEP1): LC_ALL for uniq.
265 * Makefile.in: Regenerate.
267 2009-06-02 Nick Clifton <nickc@redhat.com>
269 * po/nl.po: Updated Dutch translation.
271 2009-06-02 Tristan Gingold <gingold@adacore.com>
273 * ia64-gen.c (parse_resource_users, print_dependency_table,
274 add_dis_table_ent, finish_distable, insert_bit_table_ent,
275 add_dis_entry, compact_distree, gen_dis_table, completer_entries_eq,
276 get_prefix_len, compute_completer_bits, insert_opcode_dependencies,
277 insert_completer_entry, print_completer_entry, print_completer_table,
278 opcodes_eq, add_opcode_entry, shrink): Use ISO C syntax for functions.
280 2009-05-28 DJ Delorie <dj@redhat.com>
282 * mep-asm.c: Regenerate.
283 * mep-desc.c: Regenerate.
285 2009-05-26 DJ Delorie <dj@redhat.com>
287 * mep-asm.c: Regenerate.
288 * mep-desc.c: Regenerate.
289 * mep-desc.h: Regenerate.
290 * mep-dis.c: Regenerate.
291 * mep-ibld.c: Regenerate.
292 * mep-opc.c: Regenerate.
293 * mep-opc.h: Regenerate.
295 2009-05-26 Nick Clifton <nickc@redhat.com>
297 * po/id.po: Updated Indonesian translation.
298 * po/opcodes.pot: Updated template file.
300 2009-05-26 Alan Modra <amodra@bigpond.net.au>
302 * dep-in.sed: Don't modify .o to .lo here. Output one filename
303 per line with all lines having continuation backslash. Prefix
304 first line with "A", following lines with "B".
305 * Makefile.am (DEP): Don't use dep.sed here.
306 (DEP1): Run $MKDEP on single files, modify .o to .lo here. Use
307 dep.sed here on dependencies, sort and uniq.
308 * Makefile.in: Regenerate.
310 2009-05-25 Tristan Gingold <gingold@adacore.com>
312 * makefile.vms (OPT): New variable.
313 (CFLAGS): Update compilation flags.
315 2009-05-22 DJ Delorie <dj@redhat.com>
317 * mep-asm.c: Regenerate.
318 * mep-desc.c: Regenerate.
319 * mep-desc.h: Regenerate.
320 * mep-dis.c: Regenerate.
321 * mep-ibld.c: Regenerate.
322 * mep-opc.c: Regenerate.
323 * mep-opc.h: Regenerate.
325 2009-05-22 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
327 * i386-opc.h (Cpusse5): Delete.
328 (i386_cpu_flags): Delete.
329 * i386-gen.c: Remove CpuSSE5, Drex, Drexv and Drexc.
330 * i386-opc.tbl: Remove SSE5 instructions.
331 * i386-tbl.h: Regenerate.
332 * i386-init.h: Regenerate.
333 * i386-dis.c (OP_E_memeory, OP_E_extended): Remove drex handling.
334 (print_drex_arg): Delete.
337 (OP_DREX_ICMP): Delete.
338 (OP_DREX_FCMP): Delete.
340 (THREE_BYTE_0F24, THREE_BYTE_0F25, THREE_BYTE_0f7B): Delete.
342 2009-05-22 Alan Modra <amodra@bigpond.net.au>
344 * Makefile.am: Run "make dep-am".
345 * Makefile.in: Regenerate.
346 * po/POTFILES.in: Regenerate.
348 2009-05-19 DJ Delorie <dj@redhat.com>
350 * mep-asm.c: Regenerate.
351 * mep-opc.c: Regenerate.
353 2009-04-30 DJ Delorie <dj@redhat.com>
355 * mep-asm.c: Regenerate.
356 * mep-desc.c: Regenerate.
357 * mep-desc.h: Regenerate.
358 * mep-dis.c: Regenerate.
359 * mep-ibld.c: Regenerate.
360 * mep-opc.c: Regenerate.
361 * mep-opc.h: Regenerate.
363 2009-04-17 DJ Delorie <dj@redhat.com
365 * mep-desc.c: Regenerate.
366 * mep-ibld.c: Regenerate.
367 * mep-opc.c: Regenerate.
368 * mep-opc.h: Regenerate.
370 2009-04-15 Anthony Green <green@moxielogic.com>
372 * moxie-opc.c, moxie-dis.c: Created.
373 * Makefile.am: Build the moxie source files.
374 * configure.in: Add moxie support.
375 * Makefile.in, configure: Rebuilt.
376 * disassemble.c (disassembler): Add moxie support.
377 (ARCH_moxie): Define.
379 2009-04-15 Jan Beulich <jbeulich@novell.com>
381 * i386-opc.tbl (protb, protw, protd, protq): Set opcode
383 (pshab, pshaw, pshad, pshaq): Likewise.
384 * i386-tbl.h: Re-generate.
386 2009-04-08 DJ Delorie <dj@redhat.com
388 * mep-asm.c: Regenerate.
389 * mep-desc.c: Regenerate.
390 * mep-desc.h: Regenerate.
391 * mep-dis.c: Regenerate.
392 * mep-ibld.c: Regenerate.
393 * mep-opc.c: Regenerate.
394 * mep-opc.h: Regenerate.
396 2009-04-07 Peter Bergner <bergner@vnet.ibm.com>
398 * ppc-opc.c (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva",
399 "tlbilx">: Use secondary opcode "18" as per the ISA 2.06 documentation.
400 Reorder entries so the extended mnemonics are listed before tlbilx.
402 2009-04-02 Peter Bergner <bergner@vnet.ibm.com>
404 * ppc-dis.c (powerpc_init_dialect): Do not choose a default dialect
406 (print_insn_powerpc): Make sure we only deprecate instructions using
407 the original dialect and not a modified dialect due to -Many handling.
408 Move the handling of the condition register and default operands to
409 the end of the if/else if/else chain.
410 * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
411 instructions from newer processors are listed before older ones.
412 <"icblce", "sync", "eieio", "tlbld">: Deprecate for processors
413 that have instructions with conflicting opcodes.
415 2009-04-01 Peter Bergner <bergner@vnet.ibm.com>
417 * ppc-opc.c (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and
420 2009-04-01 Christophe Lyon <christophe.lyon@st.com>
422 * arm-dis.c (print_insn): Print BE8 opcodes in little endianness.
424 2009-03-30 Joseph Myers <joseph@codesourcery.com>
426 * arm-dis.c (print_insn): Also check section matches in backwards
427 search for mapping symbol.
429 2009-03-26 H.J. Lu <hongjiu.lu@intel.com>
431 * i386-dis.c (get_valid_dis386): Abort on unhandled table.
433 2009-03-18 Alan Modra <amodra@bigpond.net.au>
435 * cgen-opc.c: Include alloca-conf.h rather than alloca.h.
436 * Makefile.am: Run "make dep-am".
437 * Makefile.in: Regenerate.
438 * openrisc-opc.c: Regenerate.
440 2009-03-10 Nick Clifton <nickc@redhat.com>
442 * po/id.po: Updated Indonesian translation.
444 2009-03-10 Alan Modra <amodra@bigpond.net.au>
446 * ppc-dis.c: Include "opintl.h".
447 (struct ppc_mopt, ppc_opts): New.
448 (ppc_parse_cpu): New function.
449 (powerpc_init_dialect): Use it.
450 (print_ppc_disassembler_options): Dump options from ppc_opts.
451 Internationalize message.
453 2009-03-06 Nick Clifton <nickc@redhat.com>
455 * po/es.po: Updated Spanish translation.
457 2009-03-04 Alan Modra <amodra@bigpond.net.au>
460 * configure.in: Test for ld --as-needed support. Link shared
461 libopcodes against libm.
462 * configure: Regenerate.
464 2009-03-03 Peter Bergner <bergner@vnet.ibm.com>
466 * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
467 instructions from newer processors are listed before older ones.
469 2009-03-03 Alan Modra <amodra@bigpond.net.au>
471 * Makefile.am: Run "make dep-am".
472 (HFILES): Move lm32-desc.h and lm32-opc.h from..
474 * Makefile.in: Regenerate.
476 2009-03-02 Qinwei <qinwei@sunnorth.com.cn>
478 * score7-dis.c: New file.
479 * Makefile.am: Add dependencies for score7-dis.c.
480 * Makefile.in: Regenerate.
481 * configure.in: Add score7-dis to score files.
482 * configure: Regenerate.
483 * score-dis.c: Add support for score7 architecture.
484 * score-opc.h: Likewise.
486 2009-03-01 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
488 * configure: Regenerate.
490 2009-02-27 H.J. Lu <hongjiu.lu@intel.com>
492 * i386-dis.c (OP_EX): Call OP_E_memory instead of OP_E.
494 2009-02-26 Peter Bergner <bergner@vnet.ibm.com>
496 * ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble
497 the power7 and the isel instructions.
498 * ppc-opc.c (insert_xc6, extract_xc6): New static functions.
499 (insert_dm, extract_dm): Likewise.
500 (XB6): Update comment to include XX2 form.
501 (WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK,
502 XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New.
503 (RemoveXX3DM): Delete.
504 (powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr",
505 "mftgpr">: Deprecate for POWER7.
506 <"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte",
507 "frsqrte.">: Deprecate the three operand form and enable the two
508 operand form for POWER7 and later.
509 <"wait">: Extend to accept optional parameter. Enable for POWER7.
510 <"waitsrv", "waitimpl">: Add extended opcodes.
511 <"ldbrx", "stdbrx">: Enable for POWER7.
512 <"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes.
513 <"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde",
514 "divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo",
515 "divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.",
516 "divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.",
517 "fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.",
518 "fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx",
519 "lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes.
520 <"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx",
521 "stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp",
522 "xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds",
523 "xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp",
524 "xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp",
525 "xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp",
526 "xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic",
527 "xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp",
528 "xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp",
529 "xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp",
530 "xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.",
531 "xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp",
532 "xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp",
533 "xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp",
534 "xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp",
535 "xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp",
536 "xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp",
537 "xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp",
538 "xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp",
539 "xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp",
540 "xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi",
541 "xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp",
542 "xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp",
543 "xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp",
544 "xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor",
545 "xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd",
546 "xxspltw", "xxswapd">: Add VSX opcodes.
548 2009-02-23 H.J. Lu <hongjiu.lu@intel.com>
550 * i386-gen.c (operand_type_init): Remove OPERAND_TYPE_VEX_IMM4.
551 (operand_types): Remove Vex_Imm4.
553 * i386-opc.h (Vex_Imm4): Removed.
555 (i386_operand_type): Remove vex_imm4.
557 * i386-opc.tbl: Remove Vex_Imm4 comments.
558 * i386-init.h: Regenerated.
559 * i386-tbl.h: Likewise.
561 2009-02-23 Richard Earnshaw <rearnsha@arm.com>
563 * arm-dis.c (neon_opcodes): Correct bit-mask and patterns for
564 vq{r}shr{u}n.s64 insnstructions.
566 2009-02-19 Peter Bergner <bergner@vnet.ibm.com>
568 * ppc-opc.c (powerpc_opcodes) <"lfdepx", "stfdepx">: Fix the first
569 operand to be a float point register (FRT/FRS).
571 2009-02-18 Adam Nemet <anemet@caviumnetworks.com>
573 * mips-opc.c (mips_builtin_opcodes): Move the Octeon-specific
574 dmfc2 and dmtc2 before the architecture-level variants.
576 2009-02-18 Pierre Muller <muller@ics.u-strasbg.fr>
578 * fr30-opc.c: Regenerate.
579 * frv-opc.c: Regenerate.
580 * ip2k-opc.c: Regenerate.
581 * iq2000-opc.c: Regenerate.
582 * lm32-opc.c: Regenerate.
583 * m32c-opc.c: Regenerate.
584 * m32r-opc.c: Regenerate.
585 * mep-opc.c: Regenerate.
586 * mt-opc.c: Regenerate.
587 * xc16x-opc.c: Regenerate.
588 * xstormy16-opc.c: Regenerate.
589 * tic54x-dis.c (print_instruction): Avoid compiler warning on
592 2009-02-12 Nathan Sidwell <nathan@codesourcery.com>
594 * m68k-opc.c (m68k_opcodes): Add stldsr instruction.
596 2009-02-05 Peter Bergner <bergner@vnet.ibm.com>
598 * ppc-opc.c: Update copyright year.
599 (powerpc_opcodes) <"dcbt", "dcbtst">: Deprecate the Embedded operand
600 ordering for POWER4 and later and use the correct Server ordering.
602 2009-02-04 H.J. Lu <hongjiu.lu@intel.com>
604 AVX Programming Reference (January, 2009)
605 * i386-dis.c (PREFIX_VEX_3A44): New.
606 (VEX_LEN_3A44_P_2): Likewise.
607 (PREFIX_VEX_3A48): Updated.
608 (VEX_LEN_3A4C_P_2): Likewise.
609 (prefix_table): Add PREFIX_VEX_3A44.
610 (vex_table): Likewise.
611 (vex_len_table): Add VEX_LEN_3A44_P_2.
613 * i386-opc.tbl: Add PCLMUL + AVX instructions.
614 * i386-tbl.h: Regenerated.
616 2009-02-03 Sandip Matte <sandip@rmicorp.com>
618 * mips-dis.c (mips_cp0_names_xlr, mips_cp0sel_names_xlr): Define.
619 (mips_arch_choices): Add XLR entry.
620 * mips-opc.c (XLR): Define.
621 (mips_builtin_opcodes): Add XLR instructions.
623 2009-02-03 Carlos O'Donell <carlos@codesourcery.com>
625 * Makefile.am: Add install-pdf target.
626 * po/Make-in: Add install-pdf target.
627 * Makefile.in: Regenerate.
629 2009-02-02 DJ Delorie <dj@redhat.com>
631 * mep-asm.c: Regenerate.
632 * mep-desc.c: Regenerate.
633 * mep-desc.h: Regenerate.
634 * mep-dis.c: Regenerate.
635 * mep-ibld.c: Regenerate.
636 * mep-opc.c: Regenerate.
637 * mep-opc.h: Regenerate.
639 2009-01-29 Mark Mitchell <mark@codesourcery.com>
641 * arm-dis.c (thumb32_opcodes): Correct decoding for qadd, qdadd,
644 2009-01-28 Chao-ying Fu <fu@mips.com>
646 * mips-opc.c (suxc1): Add the flag of FP_D.
648 2009-01-20 Alan Modra <amodra@bigpond.net.au>
650 * fr30-asm.c, fr30-dis.c, fr30-ibld.c, frv-asm.c, frv-dis.c,
651 * frv-ibld.c, ip2k-asm.c, ip2k-dis.c, ip2k-ibld.c,
652 * iq2000-asm.c, iq2000-dis.c, iq2000-ibld.c, m32c-asm.c,
653 * m32c-dis.c, m32c-ibld.c, m32r-asm.c, m32r-dis.c,
654 * m32r-ibld.c, mep-asm.c, mep-dis.c, mep-ibld.c, mt-asm.c,
655 * mt-dis.c, mt-ibld.c, openrisc-asm.c, openrisc-dis.c,
656 * openrisc-ibld.c, xc16x-asm.c, xc16x-dis.c, xc16x-ibld.c,
657 * xstormy16-asm.c, xstormy16-dis.c, xstormy16-ibld.c: Regenerate.
659 2009-01-16 Alan Modra <amodra@bigpond.net.au>
661 * configure.in (commonbfdlib): Delete.
662 (SHARED_LIBADD): Add pic libiberty if such is available.
663 * configure: Regenerate.
664 * po/POTFILES.in: Regenerate.
666 2009-01-14 Peter Bergner <bergner@vnet.ibm.com>
668 * ppc-dis.c (print_insn_powerpc): Skip insn if it is deprecated.
669 * ppc-opc.c (powerpc_opcodes) <mtfsf, mtfsf.>: Deprecate the two
670 operand form and enable the four operand form for POWER6 and later.
671 <mtfsfi, mtfsfi.>: Deprecate the two operand form and enable the
672 three operand form for POWER6 and later.
674 2009-01-14 Mike Frysinger <vapier@gentoo.org>
676 * bfin-dis.c (OUTS): Use "%s" as format string.
678 2009-01-13 H.J. Lu <hongjiu.lu@intel.com>
680 * i386-gen.c (cpu_flag_init): Remove a white space.
681 (operand_type_init): Likewise.
683 2009-01-12 H.J. Lu <hongjiu.lu@intel.com>
685 * i386-opc.tbl: Add NoAVX to movnti, lfence and mfence.
686 * i386-tbl.h: Regenerated.
688 2009-01-12 H.J. Lu <hongjiu.lu@intel.com>
690 * i386-dis.c (dis386): Use EbS on addB, orB, adcB, sbbB, andB,
691 subB, xorB and cmpB. Use EvS on addS, orS, adcS, sbbS, andS,
694 2009-01-10 H.J. Lu <hongjiu.lu@intel.com>
696 * i386-gen.c (cpu_flag_init): Replace CpuP4 and CpuK6 with
697 CpuClflush and CpuSYSCALL, respectively. Remove CpuK8. Add
698 CPU_COREI7_FLAGS, CPU_CLFLUSH_FLAGS and CPU_SYSCALL_FLAGS.
699 (cpu_flags): Remove CpuP4, CpuK6 and CpuK8. Add CpuClflush
702 (set_bitfield): Take an argument, lineno. Don't report lineno
703 on error if it is -1.
704 (process_i386_cpu_flag): Take an argument, lineno.
705 (process_i386_opcode_modifier): Likewise.
706 (process_i386_operand_type): Likewise.
707 (output_i386_opcode): Likewise.
708 (opcode_hash_entry): Add lineno.
709 (process_i386_opcodes): Updated.
710 (process_i386_registers): Likewise.
711 (process_i386_initializers): Likewise.
713 * i386-opc.h (CpuP4): Removed.
717 (CpuSYSCALL): Likewise.
719 (i386_cpu_flags): Remove cpup4, cpuk6 and cpuk8. Add
720 cpuclflush and cpusyscall.
722 * i386-opc.tbl: Update movnti, clflush, lfence, mfence, pause,
724 * i386-init.h: Regenerated.
725 * i386-tbl.h: Likewise.
727 2009-01-09 H.J. Lu <hongjiu.lu@intel.com>
729 * i386-gen.c (cpu_flag_init): Add CpuRdtscp to CPU_K8_FLAGS
730 and CPU_AMDFAM10_FLAGS. Add CPU_RDTSCP_FLAGS.
731 (cpu_flags): Add CpuRdtscp.
732 (set_bitfield): Remove CpuSledgehammer check.
734 * i386-opc.h (CpuRdtscp): New.
736 (i386_cpu_flags): Add cpurdtscp.
738 * i386-opc.tbl: Replace CpuSledgehammer with CpuRdtscp.
739 * i386-init.h: Regenerated.
740 * i386-tbl.h: Likewise.
742 2009-01-09 Peter Bergner <bergner@vnet.ibm.com>
744 * ppc-opc.c (PPCNONE): Define.
746 (powerpc_opcodes): Initialize the new "deprecated" field.
748 2009-01-06 H.J. Lu <hongjiu.lu@intel.com>
750 AVX Programming Reference (December, 2008)
751 * i386-dis.c (VEX_LEN_2B_M_0): Removed.
752 (VEX_LEN_E7_P_2_M_0): Likewise.
753 (VEX_LEN_2C_P_1): Updated.
754 (VEX_LEN_E8_P_2): Likewise.
755 (vex_len_table): Remove VEX_LEN_2B_M_0 and VEX_LEN_E7_P_2_M_0.
756 (mod_table): Likewise.
758 * i386-opc.tbl: Add 256bit vmovntdq, vmovntpd and vmovntps.
759 * i386-tbl.h: Regenerated.
761 2009-01-05 H.J. Lu <hongjiu.lu@intel.com>
763 * i386-gen.c (process_copyright): Update for 2009.
765 * i386-init.h: Regenerated.
766 * i386-tbl.h: Likewise.
768 2009-01-05 H.J. Lu <hongjiu.lu@intel.com>
770 AVX Programming Reference (December, 2008)
771 * i386-dis.c (OP_VEX_FMA): Removed.
772 (OP_EX_VexW): Likewise.
773 (OP_EX_VexImmW): Likewise.
774 (OP_XMM_VexW): Likewise.
775 (VEXI4_Fixup): Likewise.
776 (VPERMIL2_Fixup): Likewise.
779 (Vex128FMA): Likewise.
783 (EXVexImmW): Likewise.
785 (VPERMIL2): Likewise.
786 (PREFIX_VEX_3A48...PREFIX_VEX_3A4A): Likewise.
787 (PREFIX_VEX_3A5C...PREFIX_VEX_3A5F): Likewise.
788 (PREFIX_VEX_3A68...PREFIX_VEX_3A6F): Likewise.
789 (PREFIX_VEX_3A78...PREFIX_VEX_3A7F): Likewise.
790 (VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2): Likewise.
791 (VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2): Likewise.
792 (get_vex_imm8): Likewise.
793 (OP_EX_VexReg): Likewise.
794 vpermil2_op): Likewise.
796 (vex_w_dq_mode): Likewise.
797 (PREFIX_VEX_3896...PREFIX_VEX_389F): Likewise.
798 (PREFIX_VEX_38A6...PREFIX_VEX_38AF): Likewise.
799 (PREFIX_VEX_38B6...PREFIX_VEX_38BF): Likewise.
801 (PREFIX_VEX_38DB): Likewise.
802 (PREFIX_VEX_3A4A): Likewise.
803 (PREFIX_VEX_3A60): Likewise.
804 (PREFIX_VEX_3ADF): Likewise.
805 (VEX_LEN_3ADF_P_2): Likewise.
806 (prefix_table): Remove PREFIX_VEX_3A48...PREFIX_VEX_3A4A,
807 PREFIX_VEX_3A5C...PREFIX_VEX_3A5F,
808 PREFIX_VEX_3A68...PREFIX_VEX_3A6F and
809 PREFIX_VEX_3A78...PREFIX_VEX_3A7F. Add
810 PREFIX_VEX_3896...PREFIX_VEX_389F,
811 PREFIX_VEX_38A6...PREFIX_VEX_38AF and
812 PREFIX_VEX_38B6...PREFIX_VEX_38BF.
813 (vex_table): Likewise.
814 (vex_len_table): Remove VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2
815 and VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2.
816 (putop): Support "%XW".
817 (intel_operand_size): Handle vex_w_dq_mode.
819 * i386-opc.h (VexNDS): Add a comment for VEX NDS and VEX DDS.
821 * i386-opc.tbl: Remove vpermil2pd/vpermil2ps and old FMA
822 instructions. Add new FMA instructions.
823 * i386-tbl.h: Regenerated.
825 2009-01-02 Matthias Klose <doko@ubuntu.com>
827 * or32-opc.c (or32_print_register, or32_print_immediate,
828 disassemble_insn): Don't rely on undefined sprintf behaviour.
830 For older changes see ChangeLog-2008
836 version-control: never