opcodes/ChangeLog

   1 2009-04-01  Christophe Lyon  <christophe.lyon@st.com>
   2
   3         * arm-dis.c (print_insn): Print BE8 opcodes in little endianness.
   4
   5 2009-03-30  Joseph Myers  <joseph@codesourcery.com>
   6
   7         * arm-dis.c (print_insn): Also check section matches in backwards
   8         search for mapping symbol.
   9
  10 2009-03-26  H.J. Lu  <hongjiu.lu@intel.com>
  11
  12         * i386-dis.c (get_valid_dis386): Abort on unhandled table.
  13
  14 2009-03-18  Alan Modra  <amodra@bigpond.net.au>
  15
  16         * cgen-opc.c: Include alloca-conf.h rather than alloca.h.
  17         * Makefile.am: Run "make dep-am".
  18         * Makefile.in: Regenerate.
  19         * openrisc-opc.c: Regenerate.
  20
  21 2009-03-10  Nick Clifton  <nickc@redhat.com>
  22
  23         * po/id.po: Updated Indonesian translation.
  24
  25 2009-03-10  Alan Modra  <amodra@bigpond.net.au>
  26
  27         * ppc-dis.c: Include "opintl.h".
  28         (struct ppc_mopt, ppc_opts): New.
  29         (ppc_parse_cpu): New function.
  30         (powerpc_init_dialect): Use it.
  31         (print_ppc_disassembler_options): Dump options from ppc_opts.
  32         Internationalize message.
  33
  34 2009-03-06  Nick Clifton  <nickc@redhat.com>
  35
  36         * po/es.po: Updated Spanish translation.
  37
  38 2009-03-04  Alan Modra  <amodra@bigpond.net.au>
  39
  40         PR 6768
  41         * configure.in: Test for ld --as-needed support.  Link shared
  42         libopcodes against libm.
  43         * configure: Regenerate.
  44
  45 2009-03-03  Peter Bergner  <bergner@vnet.ibm.com>
  46
  47         * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
  48         instructions from newer processors are listed before older ones.
  49
  50 2009-03-03  Alan Modra  <amodra@bigpond.net.au>
  51
  52         * Makefile.am: Run "make dep-am".
  53         (HFILES): Move lm32-desc.h and lm32-opc.h from..
  54         (CFILES): ..here.
  55         * Makefile.in: Regenerate.
  56
  57 2009-03-02  Qinwei  <qinwei@sunnorth.com.cn>
  58
  59         * score7-dis.c: New file.
  60         * Makefile.am: Add dependencies for score7-dis.c.
  61         * Makefile.in: Regenerate.
  62         * configure.in: Add score7-dis to score files.
  63         * configure: Regenerate.
  64         * score-dis.c: Add support for score7 architecture.
  65         * score-opc.h: Likewise.
  66
  67 2009-03-01  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
  68
  69         * configure: Regenerate.
  70
  71 2009-02-27  H.J. Lu  <hongjiu.lu@intel.com>
  72
  73         * i386-dis.c (OP_EX): Call OP_E_memory instead of OP_E.
  74
  75 2009-02-26  Peter Bergner  <bergner@vnet.ibm.com>
  76
  77         * ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble
  78         the power7 and the isel instructions.
  79         * ppc-opc.c (insert_xc6, extract_xc6): New static functions.
  80         (insert_dm, extract_dm): Likewise.
  81         (XB6): Update comment to include XX2 form.
  82         (WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK,
  83         XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New.
  84         (RemoveXX3DM): Delete.
  85         (powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr",
  86         "mftgpr">: Deprecate for POWER7.
  87         <"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte",
  88         "frsqrte.">: Deprecate the three operand form and enable the two
  89         operand form for POWER7 and later.
  90         <"wait">: Extend to accept optional parameter.  Enable for POWER7.
  91         <"waitsrv", "waitimpl">: Add extended opcodes.
  92         <"ldbrx", "stdbrx">: Enable for POWER7.
  93         <"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes.
  94         <"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde",
  95         "divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo",
  96         "divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.",
  97         "divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.",
  98         "fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.",
  99         "fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx",
 100         "lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes.
 101         <"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx",
 102         "stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp",
 103         "xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds",
 104         "xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp",
 105         "xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp",
 106         "xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp",
 107         "xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic",
 108         "xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp",
 109         "xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp",
 110         "xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp",
 111         "xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.",
 112         "xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp",
 113         "xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp",
 114         "xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp",
 115         "xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp",
 116         "xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp",
 117         "xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp",
 118         "xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp",
 119         "xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp",
 120         "xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp",
 121         "xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi",
 122         "xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp",
 123         "xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp",
 124         "xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp",
 125         "xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor",
 126         "xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd",
 127         "xxspltw", "xxswapd">: Add VSX opcodes.
 128
 129 2009-02-23  H.J. Lu  <hongjiu.lu@intel.com>
 130
 131         * i386-gen.c (operand_type_init): Remove OPERAND_TYPE_VEX_IMM4.
 132         (operand_types): Remove Vex_Imm4.
 133
 134         * i386-opc.h (Vex_Imm4): Removed.
 135         (OTMax): Updated.
 136         (i386_operand_type): Remove vex_imm4.
 137
 138         * i386-opc.tbl: Remove Vex_Imm4 comments.
 139         * i386-init.h: Regenerated.
 140         * i386-tbl.h: Likewise.
 141
 142 2009-02-23  Richard Earnshaw  <rearnsha@arm.com>
 143
 144         * arm-dis.c (neon_opcodes): Correct bit-mask and patterns for
 145         vq{r}shr{u}n.s64 insnstructions.
 146
 147 2009-02-19  Peter Bergner  <bergner@vnet.ibm.com>
 148
 149         * ppc-opc.c (powerpc_opcodes) <"lfdepx", "stfdepx">: Fix the first
 150         operand to be a float point register (FRT/FRS).
 151
 152 2009-02-18  Adam Nemet  <anemet@caviumnetworks.com>
 153
 154         * mips-opc.c (mips_builtin_opcodes): Move the Octeon-specific
 155         dmfc2 and dmtc2 before the architecture-level variants.
 156
 157 2009-02-18  Pierre Muller  <muller@ics.u-strasbg.fr>
 158
 159         * fr30-opc.c: Regenerate.
 160         * frv-opc.c: Regenerate.
 161         * ip2k-opc.c: Regenerate.
 162         * iq2000-opc.c: Regenerate.
 163         * lm32-opc.c: Regenerate.
 164         * m32c-opc.c: Regenerate.
 165         * m32r-opc.c: Regenerate.
 166         * mep-opc.c: Regenerate.
 167         * mt-opc.c: Regenerate.
 168         * xc16x-opc.c: Regenerate.
 169         * xstormy16-opc.c: Regenerate.
 170         * tic54x-dis.c (print_instruction): Avoid compiler warning on
 171         sprintf call.
 172
 173 2009-02-12  Nathan Sidwell  <nathan@codesourcery.com>
 174
 175         * m68k-opc.c (m68k_opcodes): Add stldsr instruction.
 176
 177 2009-02-05  Peter Bergner  <bergner@vnet.ibm.com>
 178
 179         * ppc-opc.c: Update copyright year.
 180         (powerpc_opcodes) <"dcbt", "dcbtst">: Deprecate the Embedded operand
 181         ordering for POWER4 and later and use the correct Server ordering.
 182
 183 2009-02-04  H.J. Lu  <hongjiu.lu@intel.com>
 184
 185         AVX Programming Reference (January, 2009)
 186         * i386-dis.c (PREFIX_VEX_3A44): New.
 187         (VEX_LEN_3A44_P_2): Likewise.
 188         (PREFIX_VEX_3A48): Updated.
 189         (VEX_LEN_3A4C_P_2): Likewise.
 190         (prefix_table): Add PREFIX_VEX_3A44.
 191         (vex_table): Likewise.
 192         (vex_len_table): Add VEX_LEN_3A44_P_2.
 193
 194         * i386-opc.tbl: Add PCLMUL + AVX instructions.
 195         * i386-tbl.h: Regenerated.
 196
 197 2009-02-03  Sandip Matte  <sandip@rmicorp.com>
 198
 199         * mips-dis.c (mips_cp0_names_xlr, mips_cp0sel_names_xlr): Define.
 200         (mips_arch_choices): Add XLR entry.
 201         * mips-opc.c (XLR): Define.
 202         (mips_builtin_opcodes): Add XLR instructions.
 203
 204 2009-02-03  Carlos O'Donell  <carlos@codesourcery.com>
 205
 206         * Makefile.am: Add install-pdf target.
 207         * po/Make-in: Add install-pdf target.
 208         * Makefile.in: Regenerate.
 209
 210 2009-02-02  DJ Delorie  <dj@redhat.com>
 211
 212         * mep-asm.c: Regenerate.
 213         * mep-desc.c: Regenerate.
 214         * mep-desc.h: Regenerate.
 215         * mep-dis.c: Regenerate.
 216         * mep-ibld.c: Regenerate.
 217         * mep-opc.c: Regenerate.
 218         * mep-opc.h: Regenerate.
 219
 220 2009-01-29  Mark Mitchell  <mark@codesourcery.com>
 221
 222         * arm-dis.c (thumb32_opcodes): Correct decoding for qadd, qdadd,
 223         qsub, and qdsub.
 224
 225 2009-01-28  Chao-ying Fu  <fu@mips.com>
 226
 227         * mips-opc.c (suxc1): Add the flag of FP_D.
 228
 229 2009-01-20  Alan Modra  <amodra@bigpond.net.au>
 230
 231         * fr30-asm.c, fr30-dis.c, fr30-ibld.c, frv-asm.c, frv-dis.c,
 232         * frv-ibld.c, ip2k-asm.c, ip2k-dis.c, ip2k-ibld.c,
 233         * iq2000-asm.c, iq2000-dis.c, iq2000-ibld.c, m32c-asm.c,
 234         * m32c-dis.c, m32c-ibld.c, m32r-asm.c, m32r-dis.c,
 235         * m32r-ibld.c, mep-asm.c, mep-dis.c, mep-ibld.c, mt-asm.c,
 236         * mt-dis.c, mt-ibld.c, openrisc-asm.c, openrisc-dis.c,
 237         * openrisc-ibld.c, xc16x-asm.c, xc16x-dis.c, xc16x-ibld.c,
 238         * xstormy16-asm.c, xstormy16-dis.c, xstormy16-ibld.c: Regenerate.
 239
 240 2009-01-16  Alan Modra  <amodra@bigpond.net.au>
 241
 242         * configure.in (commonbfdlib): Delete.
 243         (SHARED_LIBADD): Add pic libiberty if such is available.
 244         * configure: Regenerate.
 245         * po/POTFILES.in: Regenerate.
 246
 247 2009-01-14  Peter Bergner  <bergner@vnet.ibm.com>
 248
 249         * ppc-dis.c (print_insn_powerpc): Skip insn if it is deprecated.
 250         * ppc-opc.c (powerpc_opcodes) <mtfsf, mtfsf.>: Deprecate the two
 251         operand form and enable the four operand form for POWER6 and later.
 252         <mtfsfi, mtfsfi.>: Deprecate the two operand form and enable the
 253         three operand form for POWER6 and later.
 254
 255 2009-01-14  Mike Frysinger  <vapier@gentoo.org>
 256
 257         * bfin-dis.c (OUTS): Use "%s" as format string.
 258
 259 2009-01-13  H.J. Lu  <hongjiu.lu@intel.com>
 260
 261         * i386-gen.c (cpu_flag_init): Remove a white space.
 262         (operand_type_init): Likewise.
 263
 264 2009-01-12  H.J. Lu  <hongjiu.lu@intel.com>
 265
 266         * i386-opc.tbl: Add NoAVX to movnti, lfence and mfence.
 267         * i386-tbl.h: Regenerated.
 268
 269 2009-01-12  H.J. Lu  <hongjiu.lu@intel.com>
 270
 271         * i386-dis.c (dis386): Use EbS on addB, orB, adcB, sbbB, andB,
 272         subB, xorB and cmpB.  Use EvS on addS, orS, adcS, sbbS, andS,
 273         subS, xorS and cmpS.
 274
 275 2009-01-10  H.J. Lu  <hongjiu.lu@intel.com>
 276
 277         * i386-gen.c (cpu_flag_init): Replace CpuP4 and CpuK6 with
 278         CpuClflush and CpuSYSCALL, respectively. Remove CpuK8.  Add
 279         CPU_COREI7_FLAGS, CPU_CLFLUSH_FLAGS and CPU_SYSCALL_FLAGS.
 280         (cpu_flags): Remove CpuP4, CpuK6 and CpuK8.  Add CpuClflush
 281         and CpuSYSCALL.
 282         (lineno): Removed.
 283         (set_bitfield): Take an argument, lineno.  Don't report lineno
 284         on error if it is -1.
 285         (process_i386_cpu_flag): Take an argument, lineno.
 286         (process_i386_opcode_modifier): Likewise.
 287         (process_i386_operand_type): Likewise.
 288         (output_i386_opcode): Likewise.
 289         (opcode_hash_entry): Add lineno.
 290         (process_i386_opcodes): Updated.
 291         (process_i386_registers): Likewise.
 292         (process_i386_initializers): Likewise.
 293
 294         * i386-opc.h (CpuP4): Removed.
 295         (CpuK6): Likewise.
 296         (CpuK8): Likewise.
 297         (CpuClflush): New.
 298         (CpuSYSCALL): Likewise.
 299         (CpuMMX): Updated.
 300         (i386_cpu_flags): Remove cpup4, cpuk6 and cpuk8.  Add
 301         cpuclflush and cpusyscall.
 302
 303         * i386-opc.tbl: Update movnti, clflush, lfence, mfence, pause,
 304         syscall and sysret.
 305         * i386-init.h: Regenerated.
 306         * i386-tbl.h: Likewise.
 307
 308 2009-01-09  H.J. Lu  <hongjiu.lu@intel.com>
 309
 310         * i386-gen.c (cpu_flag_init): Add CpuRdtscp to CPU_K8_FLAGS
 311         and CPU_AMDFAM10_FLAGS.  Add CPU_RDTSCP_FLAGS.
 312         (cpu_flags): Add CpuRdtscp.
 313         (set_bitfield): Remove CpuSledgehammer check.
 314
 315         * i386-opc.h (CpuRdtscp): New.
 316         (CpuLM): Updated.
 317         (i386_cpu_flags): Add cpurdtscp.
 318
 319         * i386-opc.tbl: Replace CpuSledgehammer with CpuRdtscp.
 320         * i386-init.h: Regenerated.
 321         * i386-tbl.h: Likewise.
 322
 323 2009-01-09  Peter Bergner  <bergner@vnet.ibm.com>
 324
 325         * ppc-opc.c (PPCNONE): Define.
 326         (NOPOWER4): Delete.
 327         (powerpc_opcodes): Initialize the new "deprecated" field.
 328
 329 2009-01-06  H.J. Lu  <hongjiu.lu@intel.com>
 330
 331         AVX Programming Reference (December, 2008)
 332         * i386-dis.c (VEX_LEN_2B_M_0): Removed.
 333         (VEX_LEN_E7_P_2_M_0): Likewise.
 334         (VEX_LEN_2C_P_1): Updated.
 335         (VEX_LEN_E8_P_2): Likewise.
 336         (vex_len_table): Remove VEX_LEN_2B_M_0 and VEX_LEN_E7_P_2_M_0.
 337         (mod_table): Likewise.
 338
 339         * i386-opc.tbl: Add 256bit vmovntdq, vmovntpd and vmovntps.
 340         * i386-tbl.h: Regenerated.
 341
 342 2009-01-05  H.J. Lu  <hongjiu.lu@intel.com>
 343
 344         * i386-gen.c (process_copyright): Update for 2009.
 345
 346         * i386-init.h: Regenerated.
 347         * i386-tbl.h: Likewise.
 348
 349 2009-01-05  H.J. Lu  <hongjiu.lu@intel.com>
 350
 351         AVX Programming Reference (December, 2008)
 352         * i386-dis.c (OP_VEX_FMA): Removed.
 353         (OP_EX_VexW): Likewise.
 354         (OP_EX_VexImmW): Likewise.
 355         (OP_XMM_VexW): Likewise.
 356         (VEXI4_Fixup): Likewise.
 357         (VPERMIL2_Fixup): Likewise.
 358         (VexI4): Likewise.
 359         (VexFMA): Likewise.
 360         (Vex128FMA): Likewise.
 361         (EXVexW): Likewise.
 362         (EXdVexW): Likewise.
 363         (EXqVexW): Likewise.
 364         (EXVexImmW): Likewise.
 365         (XMVexW): Likewise.
 366         (VPERMIL2): Likewise.
 367         (PREFIX_VEX_3A48...PREFIX_VEX_3A4A): Likewise.
 368         (PREFIX_VEX_3A5C...PREFIX_VEX_3A5F): Likewise.
 369         (PREFIX_VEX_3A68...PREFIX_VEX_3A6F): Likewise.
 370         (PREFIX_VEX_3A78...PREFIX_VEX_3A7F): Likewise.
 371         (VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2): Likewise.
 372         (VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2): Likewise.
 373         (get_vex_imm8): Likewise.
 374         (OP_EX_VexReg): Likewise.
 375         vpermil2_op): Likewise.
 376         (EXVexWdq): New.
 377         (vex_w_dq_mode): Likewise.
 378         (PREFIX_VEX_3896...PREFIX_VEX_389F): Likewise.
 379         (PREFIX_VEX_38A6...PREFIX_VEX_38AF): Likewise.
 380         (PREFIX_VEX_38B6...PREFIX_VEX_38BF): Likewise.
 381         (es_reg): Updated.
 382         (PREFIX_VEX_38DB): Likewise.
 383         (PREFIX_VEX_3A4A): Likewise.
 384         (PREFIX_VEX_3A60): Likewise.
 385         (PREFIX_VEX_3ADF): Likewise.
 386         (VEX_LEN_3ADF_P_2): Likewise.
 387         (prefix_table): Remove PREFIX_VEX_3A48...PREFIX_VEX_3A4A,
 388         PREFIX_VEX_3A5C...PREFIX_VEX_3A5F,
 389         PREFIX_VEX_3A68...PREFIX_VEX_3A6F and
 390         PREFIX_VEX_3A78...PREFIX_VEX_3A7F.  Add
 391         PREFIX_VEX_3896...PREFIX_VEX_389F,
 392         PREFIX_VEX_38A6...PREFIX_VEX_38AF and
 393         PREFIX_VEX_38B6...PREFIX_VEX_38BF.
 394         (vex_table): Likewise.
 395         (vex_len_table): Remove VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2
 396         and VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2.
 397         (putop): Support "%XW".
 398         (intel_operand_size): Handle vex_w_dq_mode.
 399
 400         * i386-opc.h (VexNDS): Add a comment for VEX NDS and VEX DDS.
 401
 402         * i386-opc.tbl: Remove vpermil2pd/vpermil2ps and old FMA
 403         instructions.  Add new FMA instructions.
 404         * i386-tbl.h: Regenerated.
 405
 406 2009-01-02  Matthias Klose  <doko@ubuntu.com>
 407
 408         * or32-opc.c (or32_print_register, or32_print_immediate,
 409         disassemble_insn): Don't rely on undefined sprintf behaviour.
 410
 411 For older changes see ChangeLog-2008
 412 \f
 413 Local Variables:
 414 mode: change-log
 415 left-margin: 8
 416 fill-column: 74
 417 version-control: never
 418 End: