1 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
3 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
4 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
6 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
8 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
10 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
12 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
14 (OP_DSreg): Rename from OP_DSSI.
15 (OP_ESreg): Rename from OP_ESDI.
16 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
18 (append_seg): Rename from append_prefix.
19 (ptr_reg): New function.
20 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
22 (PREFIX_ADDR): Rename from PREFIX_ADR.
23 (float_reg): Add non-broken opcodes for people who don't want
26 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
28 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
31 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
33 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
35 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
37 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
38 0; produce error message for shifts of size 32 (or 64 for 64-bit
39 shifts), because the hardware doesn't support them.
42 Mon Jun 1 10:27:26 1998 Jeffrey A Law (law@cygnus.com)
44 * mips-opc.c (c.lt.s): Remove r5900 specific variant.
47 * vu0.h (sqc2): Fix opcode.
49 * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
54 Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
56 * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
57 Change pinfo to use WR_HILO.
61 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
63 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
64 LONG_2, LONG_2b formats to use this new operand.
67 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
69 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
71 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
73 * sparc-dis.c (print_insn_sparc): big endian instruction / little
77 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
79 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
80 and SHORT_B3b formats to use Rb instead of Ra.
82 Add FLAG_MUL16 to MUL2XH opcode.
84 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
85 to existing 1.1.1 parallelisation prohibition procedure.
88 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
90 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
91 * cgen-dis.in (extract_normal): Likewise.
92 * m32r-asm.c,m32r-dis.c: Regenerate.
95 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
97 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
101 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
103 * mips-opc.c (multu1): Add two operand variant for the r5900.
106 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
108 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
109 with a shift count of 0.
112 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
114 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
116 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
118 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
119 (_print_insn_mips): Likewise.
120 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
124 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
126 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
127 (cgen_hw_lookup_by_num): New function.
130 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
133 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
135 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
137 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
139 * sparc-dis.c (print_insn_sparc): Always fetch instructions
140 as big-endian on SPARClite.
143 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
145 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
147 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
152 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
154 * d30v-opc.c (pre_defined_register): Remove alias for r0.
158 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
160 * mips-opc.c (break): Added 20-bit single-operand break
161 instruction for R5900 only.
164 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
166 * po/Make-in (install-info): New target.
168 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
170 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
171 * configure: Rebuild.
173 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
175 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
176 variety of ISA2 instructions to set bottom ten bits of trap code.
178 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
180 * Makefile.am (config.status): Add explicit target so that
181 config.status depends upon bfd/configure.in.
182 * Makefile.in: Rebuild.
184 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
186 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
187 instructions to set bottom ten bits of break code.
188 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
189 for above optional argument.
191 start-sanitize-cygnus
192 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
194 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
195 * m32r-opc.h: Regenerate.
198 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
200 * makefile.vms: Run dec c with /nodebug.
202 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
204 * Makefile.in: Rebuilt.
205 * Makefile.am: Regenerated dependencies with mkdep.
207 * opintl.h (_): Define as dgettext.
209 start-sanitize-cygnus
210 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
212 * configure.in: Add support for --enable-cgen-maint.
213 * Makefile.am (M32R_DEPS): New variable.
214 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
215 * aclocal.m4: Regenerate.
216 * Makefile.in: Regenerate.
217 * configure: Regenerate.
219 * Makefile.am (CGENFILES): Add minsn.scm.
222 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
224 * cgen-asm.c: Internationalised.
225 start-sanitize-cygnus
226 * cgen-asm.in: Internationalised.
227 * cgen-opc.in: Internationalised.
229 * m32r-asm.c: Internationalised.
230 * m32r-dis.c: Internationalised.
231 * m32r-opc.c: Internationalised.
233 * aclocal.m4: Regenerated.
234 * configure: Regenerated.
235 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
236 * Makefile.in: Rebuild.
237 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
238 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
240 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
242 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
244 * aclocal.m4, configure: Rebuild with current tools.
246 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
248 * opintl.h: New file - contains internationalisation macros used
249 by source files in this directory.
250 * po/: New subdirectory - contains internationalisation files.
251 * po/Make-in: New file - Makefile constructor.
252 * po/POTFILES.in: New file - list of files in opcodes directory
253 that should be scan for internationalisation macros.
254 * po/opcodes.pot: New file - list of internationisation strings
255 found in files mentioned in po/POTFILES.in.
256 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
257 entry. Add intl directory to include paths.
258 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
259 HAVE_STRCPY, HAVE_LC_MESSAGES
260 * configure.in: Add rule to build Makefile in po subdirectory.
261 * Makefile.in: Rebuilt.
262 * aclocal.m4: Rebuilt.
263 * config.in: Rebuilt.
264 * configure: Rebuilt.
265 * alpha-opc.c: Internationalised.
266 * arc-dis.c: Internationalised.
267 * arc-opc.c: Internationalised.
268 * arm-dis.c: Internationalised.
269 * cgen-asm.c: Internationalised.
271 * d30v-dis.c: Internationalised.
273 * dis-buf.c: Internationalised.
275 * dvp-dis.c: Internationalised.
276 * dvp-opc.c: Internationalised.
278 * h8300-dis.c: Internationalised.
279 * h8500-dis.c: Internationalised.
280 * i386-dis.c: Internationalised.
281 * m10200-dis.c: Internationalised.
282 * m10300-dis.c: Internationalised.
283 * m68k-dis.c: Internationalised.
284 * m88k-dis.c: Internationalised.
285 * mips-dis.c: Internationalised.
286 * ns32k-dis.c: Internationalised.
287 * opintl.h: Internationalised.
288 * ppc-opc.c: Internationalised.
289 * sparc-dis.c: Internationalised.
290 * v850-dis.c: Internationalised.
291 * v850-opc.c: Internationalised.
293 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
295 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
296 (asm_hash_table_entries): New variable.
297 (cgen_asm_init): Free asm_hash_table_entries.
298 (hash_insn_array,hash_insn_list): New functions.
299 (build_asm_hash_table): Use them. Hash macro insns as well.
300 (cgen_asm_lookup_insn): Update.
301 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
302 (dis_hash_table_entries): New variable.
303 (cgen_dis_init): Free dis_hash_table_entries.
304 (hash_insn_array,hash_insn_list): New functions.
305 (build_dis_hash_table): Use them. Hash macro insns as well.
306 (cgen_dis_lookup_insn): Update.
307 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
308 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
309 (cgen_macro_insn_count): New function.
310 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
311 All callers updated. Sanity check result of extract fn.
312 (@arch@_cgen_get_insn_operands): Change result type to void.
313 Delete args insn_value, length. New arg fields. All callers updated.
314 (@arch@_cgen_lookup_get_insn_operands): New function.
315 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
317 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
319 * i386-dis.c (OP_DSSI): Print segment override.
322 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
324 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
328 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
330 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
334 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
336 * vu0.h (vlqd, vlqi): Update per revised specs.
340 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
342 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
343 (vif_operands): Update.
344 (vif_get_unpackloc): Delete.
345 (state_vif_unpackloc{,_star_p}): Delete.
346 (dvp_opcode_init_parse): Update.
347 (vif_unpack_len_value): Avoid divide by zero.
351 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
353 * vu0.h: Specs changed for VCALLMSR bit pattern.
354 * mips-dis.c: (print_insn_arg) Matching change.
357 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
359 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
362 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
364 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
365 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
366 * configure.in: Define and substitute WIN32LDFLAGS and
368 * aclocal.m4: Rebuild with new libtool.
369 * configure, Makefile.in: Rebuild.
372 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
374 * vu0.h: Corrected bit pattern for VMAXI opcode.
377 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
379 * m32r-opc.c: Regenerate.
382 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
384 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
385 (dvp_expand_macro): Implement.
386 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
387 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
390 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
392 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
393 before trying to copy it.
394 * Makefile.in: Rebuild.
396 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
398 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
401 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
403 * m32r-opc.c: Fix bit patterns for SAT and SATB.
406 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
408 * ns32k-dis.c (bit_extract_simple): New function to extract bits
409 from an arbitrary valid buffer instead of fetching them on demand
411 (invalid_float): use bit_extract_simple() instead of bit_extract().
414 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
416 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
417 * m32r-opc.h: Add extra control registers.
420 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
422 From H.J. Lu <hjl@gnu.org>:
423 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
426 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
428 * Branched binutils 2.9.
431 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
433 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
434 disassembling last 4 bytes of a section.
437 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
439 Fix some gcc -Wall warnings:
440 * arc-dis.c (print_insn): Add casts to avoid warnings.
441 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
442 * d10v-dis.c (dis_long, dis_2_short): Likewise.
444 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
445 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
446 (parse_bc, parse_vfreg, parse_accdest): Likewise.
447 (parse_ffstreg, parse_vif_mode): Likewise.
449 * m10200-dis.c (disassemble): Likewise.
450 * m10300-dis.c (disassemble): Likewise.
451 * ns32k-dis.c (print_insn_ns32k): Likewise.
452 * ppc-opc.c (insert_ral, insert_ram): Likewise.
453 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
454 * cgen-opc.c (cgen_keyword_search_next): Likewise.
455 * d10v-dis.c (dis_long, dis_2_short): Likewise.
457 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
460 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
461 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
462 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
464 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
466 * tic80-dis.c (print_one_instruction): Likewise.
468 * w65-dis.c (print_operand): Likewise.
469 * z8k-dis.c (fetch_data): Likewise.
470 * a29k-dis.c: Add return type for find_byte_func_type.
471 * arc-opc.c: Include <stdio.h>. Remove declarations of
472 insert_multshift and extract_multshift.
474 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
476 (extract_value): Fully parenthesize expression.
479 * dvp-opc.c: Include <ctype.h>.
480 (print_sdest): Add default case to switch.
482 * h8500-dis.c (print_insn_h8500): Initialize local variables.
483 * h8500-opc.h (h8500_table): Fully bracket initializer.
484 * w65-opc.h (optable): Likewise.
485 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
486 * i386-dis.c (OP_E): Initialize local variables.
487 * m10200-dis.c (print_insn_mn10200): Likewise.
488 * mips-dis.c (print_insn_mips16): Likewise.
489 * sh-dis.c (print_insn_shx): Likewise.
490 * v850-dis.c (print_insn_v850): Likewise.
491 * ns32k-dis.c (print_insn_arg): Declare.
492 (get_displacement, invalid_float): Declare.
493 (list_search, sign_extend, flip_bytes): Declare return type.
494 (get_displacement): Likewise.
495 (print_insn_arg): Likewise. Make d int. Fix sprintf format
497 (print_insn_ns32k): Make i unsigned.
498 (invalid_float): Make static. Declare type of val.
499 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
500 on each for iteration.
501 * tic30-dis.c (get_indirect_operand): Likewise.
502 * z8k-dis.c (print_insn_z8001): Declare return type.
503 (print_insn_z8002): Likewise.
504 (unparse_instr): Fix sprintf format strings.
506 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
508 * mips-opc.c: Add "sync.l" and "sync.p".
511 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
513 * dvp-opc.c (extract_vif_datalen): Rewrite.
514 (vif_insn_len): Perform 0->max+1 conversion for direct length.
516 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
518 * dvp-dis.c (print_insn): Print unpack address in hex.
519 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
520 Don't skip over '*', just record it.
521 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
522 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
523 Don't skip over '*', just record it.
524 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
525 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
526 (vif_opcodes): Likewise.
527 (state_vif_{mpg,unpack}loc_star_p): New static locals.
528 (vif_macros,vif_macro_count): New globals.
529 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
530 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
531 (vif_get_wl_cl): New function.
532 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
535 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
537 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
538 default m68k variant to recognize.
540 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
541 (ctrl, cobr, mem, ea): Likewise.
542 (print_addr): Likewise. Remove cast.
543 (ea): Cast argument of print_addr to bfd_vma.
545 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
547 (cgen_parse_unsigned_integer): Likewise.
548 (cgen_parse_address): Likewise.
550 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
552 * i960-dis.c (ctrl): Add full braces to structure initialization.
553 (cobr, mem, reg): Likewise.
554 (ea): Correct parenthesization in expression.
556 * cgen-asm.c: Include <ctype.h>.
557 (build_asm_hash_table): Remove unused local variable i.
558 (cgen_parse_keyword): Add casts to avoid warnings.
560 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
561 symbol. Fix indentation.
562 (print_insn_little_arm): Likewise.
565 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
567 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
572 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
574 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
579 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
581 * dvp-opc.c (vif_operand_datalen_special): New global.
585 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
587 * vu0.h (vcallms): Use 'O' for call target operand.
588 * mips-dis.c (print_insn_arg): Handle 'O'.
591 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
593 * configure.in: Use AM_DISABLE_SHARED.
594 * aclocal.m4, configure: Rebuild with libtool 1.2.
597 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
599 * mips-dis.c: Change '%' to '#' to avoid conflict with vr5400
604 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
606 These patches are courtesy of Jonathan Walton and Tony Thompson
607 (athompso@cambridge.arm.com).
609 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
612 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
613 both the offset and the label closest to the destination.
616 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
618 * vu0.h: New file with cop2/vu0 instructions.
619 * mips-opc.c: Include vu0.h.
620 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
622 (print_insn_mips): Do not emit a tab after an instruction if the
623 first arg is an instruction completer (&). If the next arg is an
624 escape character (%), then print the next arg verbatim.
625 * Makefile.am (mips-opc.lo): Depend on vu0.h
629 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
631 * dvp-opc.c (vif_opcodes): Add stcycl.
633 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
635 * dvp-dis.c (print_dma): Change length from 16 to 8.
638 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
640 * m32r-opc.h: Regenerate.
643 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
645 * dvp-opc.c (print_dest1): Print dest spec again.
646 (print_vfreg,print_accdest): Likewise.
647 (vif_unpack_len): Round result up to word boundary.
650 start-sanitize-vr4320
651 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
653 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
655 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
657 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
662 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
664 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
665 (print_insn): Do mask comparison on proper opcode word.
666 Print unsigned values in hex.
667 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
668 (parse_bc): Catch missing dest.
669 (parse_vfreg): Replace atoi call with strtol.
670 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
671 (parse_bcftreg,parse_ffstreg): Handle missing dest.
672 (extract_gif_eop): New function.
673 (gif_operands): Update eop entry.
674 (VGIFOP,VGIFNREGS): Fix calcs.
675 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
676 (gif_regs): Add entry for unused 11 case.
677 (print_gif_regs): Print empty list instead of nothing.
678 (extract_gif_nloop): Fix value calc.
679 (print_gif_nloop): Always print value, even if 0.
680 (insert_vif_wlcl,extract_vif_wlcl): New functions.
681 (vif_operands): Use them for wl,cl fields.
682 (state_vif_wl,state_vif_cl): New static locals.
683 (parse_vif_mode): Handle numeric args.
684 (vif_unpack_len_value,vif_unpack_len): New functions.
685 (vif_insn_len): Call vif_unpack_len.
688 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
690 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
692 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
694 * cgen-asm.in: Move insertion of generated routines to top of file.
695 (insert_normal): Add prototype. Delete `shift' arg.
696 * cgen-dis.in: Move insertion of generated routines to top of file.
697 (extract_normal): Add prototype. Delete `shift' arg.
698 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
699 (print_keyword): Add prototype. Fix type of `attrs' arg.
701 start-sanitize-vr4320
702 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
704 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
705 * mips-opc.c ("mac","dmac") : Added 4320 insns.
708 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
710 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
711 assume that info->symbols is non-empty.
713 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
715 * alpha-opc.c (cvtqs) There is no such thing.
716 (cvttq): Missing most of the /*d variants.
719 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
721 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
723 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
724 (r5900/msub.s): Takes three operands, not four. Fix opcode.
728 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
730 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
731 delayed branches or jumps.
735 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
737 * dvp-opc.c (vif_operands): Add unpack[u] support.
738 (vif_opcodes): Ditto.
739 (*_vif_imrubits): Renamed from *_vif_imrbits.
741 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
743 * dvp-dis.c (print_insn): Handle word number.
744 Handle mips address vs vu address.
745 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
746 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
747 ({insert,extract}_dma_addr): Fix word ofset.
748 ({insert,print}_gif_regs): Fix encode/decode.
751 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
753 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
755 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
756 * tic30-dis.c (print_branch): Likewise.
758 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
759 * dvp-dis.c (dvp_info_mach_type): New function.
760 (print_insn_dvp): Call it.
761 (print_vif): Return length of 4 if mpg or direct insn so following
762 insns get properly disabled.
763 (print_gif): Fix word order.
764 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
765 (gif_operands): Fix word order.
766 (gif_opcodes): Likewise.
767 ({insert,extract,print}_gif_regs): Likewise.
768 (gif_regs): Add new register number/name changes.
769 (dma_opcodes): Add dmarefe insn.
772 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
774 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
775 saved_symbol code as it is no longer needed.
777 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
779 * cgen-asm.c: Include symcat.h.
780 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
782 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
785 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
787 * dvp-opc.c (extra_dma_flags): Fix typos.
788 (dma_operands): Fix word numbers.
789 (dma_opcodes): Likewise.
790 ({insert,extract}_dma_flags): Likewise.
793 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
795 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
798 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
800 * dvp-dis.c (print_gif): Complete.
801 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
802 (state_gif_{nregs,regs,nloop}): New static locals.
804 (dvp_opcode_init_{parse,print}): Init gif state locals.
805 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
806 (vif_insn_len): Handle `unpack'.
807 ({insert,extract}_dma_flags): Complete.
811 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
813 * mips-opc.c (mula.s): Renamed from multa.s.
816 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
818 * m32r-opc.[ch]: Regenerate.
821 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
823 * dvp-opc.c (dma_operands): Rewrite.
824 (dma_operand_{count,addr}): New globals.
825 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
826 (insert_dma_addr): Insert value into insn.
827 (extract_dma_addr): Extract value from insn.
829 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
831 * dvp-dis.c (print_vu): Handle loi insns.
832 (print_insn): Likewise.
833 * dvp-opc.c (vu_lower_opcodes): Add "loi".
834 (vu_operands): Make LDEST1 a FAKE operand.
835 (parse_dest1): Allow elided argument.
836 (print_dest1): Don't print the argument.
838 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
840 * dvp-opc.c (parse_vfreg): Dest spec is optional.
841 (print_vfreg): Don't print dest spec.
842 (parse_accdest): Dest spec is optional.
843 (print_accdest): Don't print dest spec.
846 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
848 * Makefile.am (CGENFILES): Update.
849 * Makefile.in: Regenerate.
850 * cgen-asm.in (insert_normal): Result is error message now.
851 Validate value to be inserted.
852 (insert_insn_normal): Result is error message now.
853 (@arch@_cgen_assemble_insn): Update.
854 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
855 arguments. Don't perform validation here.
856 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
858 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
860 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
861 operand instance list.
862 * m32r-opc.c: Regenerate.
864 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
866 * Makefile.am (AUTOMAKE_OPTIONS): Define.
867 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
869 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
871 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
873 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
875 * configure.in: Get the version number from BFD.
876 * configure: Rebuild.
878 From H.J. Lu <hjl@gnu.org>:
879 * Makefile.am (libopcodes_la_LDFLAGS): Define.
880 * Makefile.in: Rebuild.
882 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
884 * m32r-opc.c: Regenerate.
885 * m32r-opc.h: Regenerate.
887 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
889 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
890 Ignore ALIAS insns if asked to.
891 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
892 * m32r-opc.c: Regenerate.
895 * dvp.opc.c: Nicely format opcode tables.
896 (vu_operands): New element UFLAGS.
897 (parse_uflags,print_uflags): New functions.
898 (vu_upper_opcodes): Add UFLAGS to all insns.
901 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
903 Fix rac to accept only a0:
904 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
905 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
906 Introduce OPERAND_GPR.
907 * d10v-dis.c (print_operand): Likewise.
909 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
911 * cgen-opc.in: New file.
912 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
913 * Makefile.am (CGENFILES): Add cgen-opc.in.
914 * Makefile.in: Regenerate.
916 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
917 (cgen_hw_lookup): Make result const.
919 * cgen-dis.in (*): Use PTR instead of void *.
920 (print_insn): Delete unused vars `i', `syntax'.
922 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
925 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
927 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
928 (vif_opcodes): Update renamed insns.
929 * dvp-dis.c (*): Likewise.
932 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
934 * configure, aclocal.m4: Rebuild with new libtool.
937 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
939 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
940 instructions use a PC relative branch, not absolute.
943 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
945 * configure.in: Set libtool_enable_shared rather than
946 libtool_shared. Remove diversion hack.
947 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
949 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
951 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
952 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
954 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
956 * tic30-dis.c: New file.
957 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
958 * configure.in: Handle bfd_tic30_arch.
959 * Makefile.am: Rebuild dependencies.
960 (CFILES): Add tic30-dis.c
961 (ALL_MACHINES): Add tic30-dis.lo.
962 * configure, Makefile.in: Rebuild.
965 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
967 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
968 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
969 macwhi-a and macwlo-a instructions.
973 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
975 * dvp-opc.c, fixed encoding of a bunch of instructions to
976 be consistent with the asmvu assembler (and inconsistent
977 with the specification).
979 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
981 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
982 in the opcode table. The pkemscalf instruction must come first.
984 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
986 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
989 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
991 * m32r-opc.h (HAVE_CPU_M32R): Define.
994 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
996 * dvp-dis.c, dvp-opc.c: New files.
997 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
998 * configure: Regenerate.
999 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
1000 (dvp-dis.lo,dvp-opc.lo): Add rules for.
1001 (mips-dis.lo): Compile with @archdefs@.
1002 * Makefile.in: Regenerate.
1003 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
1004 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
1007 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1009 * v850-opc.c (insertion routines): If both alignment and size is
1010 wrong then report this.
1012 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1014 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1015 Only recognize instructions for the current target_processor.
1017 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1019 * d10v-dis.c (PC_MASK): Correct value.
1020 (print_operand): If there's a reloc, don't calculate the
1021 address because they could be in different sections.
1023 start-sanitize-cygnus
1024 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
1026 * cgen.sh: Rewrite to be like simulator's version.
1027 * Makefile.am (cgen): Update call to cgen.sh.
1028 * Makefile.in: Regenerate
1031 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1033 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1034 instruction after the 4650's "mul" instruction; nobody's using the
1035 4010 these days. If object files someday indicate which processor
1036 variant they're intended for, we can do a better job at this.
1038 start-sanitize-r5900
1039 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
1041 * mips-opc.c (c.lt.s): Add r5900 variant.
1045 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1047 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1048 table provided entry size. Use CGEN_INSN_MNEMONIC.
1049 (cgen_parse_keyword): Rewrite.
1050 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1051 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1052 * cgen-opc.c: Clean up pass over `struct foo' usage.
1053 (cgen_keyword_lookup_value): Handle "" entry.
1054 (cgen_keyword_add): Likewise.
1055 start-sanitize-cygnus
1056 * Makefile.am: Add cgen support.
1057 * Makefile.in: Regenerate.
1058 * configure.in: Add cgen support.
1059 * configure: Regenerate.
1060 * aclocal.m4: Regenerate.
1061 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1064 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1066 * mips-opc.c: Add FP_D to s.d instruction flags.
1068 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1070 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1072 start-sanitize-tic80
1073 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1075 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1076 PC relative offset forms before the 15 bit forms. An assembler command
1077 line option now chooses the default.
1080 start-sanitize-r5900
1081 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1083 * mips-opc.c: Add many missing r5900 instructions.
1087 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1089 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1090 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1093 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1095 * configure: Only build libopcodes shared if --enable-shared's value
1096 was `yes', or was set to `*opcodes*'.
1097 * aclocal.m4: Likewise.
1098 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1099 original source of this bit of code. It's not clear what the best fix
1102 start-sanitize-r5900
1103 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1105 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1107 start-sanitize-tic80
1108 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1110 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1111 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1112 offset forms before the 15 bit forms, to default to the long forms.
1115 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1117 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1119 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1121 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1122 symbol if none is present.
1123 (print_insn_big_arm): Prevent examination of stored symbol if
1126 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1128 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1130 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1132 * disassemble.c: Remove disasm_symaddr() function.
1134 * arm-dis.c: Use info->symbol instead of info->flags to determine
1135 if disassmbly should be in Thumb or Arm mode.
1137 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1139 * arm-dis.c: Add support for disassembling Thumb opcodes.
1140 (print_insn_thumb): New function.
1142 * disassemble.c (disasm_symaddr): New function.
1144 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1145 (thumb_opcodes): Table of Thumb opcodes.
1147 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1149 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1151 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1152 and 'v' as operand types.
1154 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1156 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1157 <olivier.carmona@di.epfl.ch>.
1158 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1159 which has a two word opcode with a one word argument.
1162 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1164 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1165 unsigned, not signed.
1166 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1169 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1171 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1172 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1173 (ftrv): Slay the cut-and-paste monster.
1175 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1177 * d10v-dis.c (print_operand):
1178 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1180 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1182 * d10v-opc.c (OPERAND_FLAG): Split into:
1183 (OPERAND_FFLAG, OPERAND_CFLAG) .
1187 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1189 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1190 field for all INSN_MACRO's.
1191 * mips16-opc.c: same
1193 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1195 * mips-opc.c (sync,cache): These are 3900 insns.
1197 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1199 sh-opc.h (sh_table): Remove ftst/nan.
1201 start-sanitize-vr5400
1202 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
1204 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1205 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1207 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1211 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
1213 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1214 Add tx49 insns and configury.
1217 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1219 * mips-opc.c (ffc, ffs): Fix mask.
1222 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1224 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1228 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1230 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1231 start-sanitize-vr5400
1232 Added VR5400 instructions.
1233 (N5): New cpu-id macro.
1235 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1237 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1239 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1240 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1242 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1244 * v850-dis.c (disassemble): Replace // with /* ... */
1246 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1248 * sparc-opc.c: Add wr & rd for v9a asr's.
1249 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1250 (v9a_asr_reg_names): New variable.
1251 Patch from David Miller <davem@vger.rutgers.edu>.
1253 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1255 * sparc-opc.c (v9notv9a): New insn type.
1256 (IMPDEP): Move to the end to not conflict with edge8 et al.
1257 Patch from David Miller <davem@vger.rutgers.edu>.
1259 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1261 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1263 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1265 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1267 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1269 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1270 of disassemble_info structure to determine if an overlay address
1271 has a matching symbol in low memory.
1273 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1274 new symbol_at_address_func field in disassemble_info structure.
1276 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1278 * v850-opc.c (extract_d22): Use signed arithmatic.
1280 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1282 * mips-opc.c: Three op mult is not an ISA insn.
1284 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1286 * mips-opc.c: Fix formatting.
1288 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1290 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1291 than assuming that char is signed. Explicitly sign extend 16 bit
1292 values, rather than assuming that short is 16 bits.
1293 (OP_sI, OP_J, OP_DIR): Likewise.
1295 start-sanitize-v850e
1296 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1298 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1302 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1304 * v850-opc.c: Fix typo in comment.
1306 * v850-dis.c (disassemble): Add test of processor type when
1307 determining opcodes.
1309 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1311 * configure.in: Use a diversion to set enable_shared before the
1312 arguments are parsed.
1313 * configure: Rebuild.
1315 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1317 * m68k-opc.c (TBL1): Use ! rather than `.
1318 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1320 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1322 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1324 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1326 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1329 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1330 * aclocal.m4: Rebuild with new libtool.
1331 * configure: Rebuild.
1333 start-sanitize-v850e
1334 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1336 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1339 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1341 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1343 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1345 * v850-opc.c (v850_opcodes): Further rearrangements.
1348 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1350 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1353 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1355 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1358 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1360 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1362 * mips16-opc.c: Added mips16 sdbbp.
1365 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1367 * v850-opc.c: Initialise processors field of v850_opcode structure.
1370 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1372 Merge changes from Martin Hunt:
1374 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1376 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1377 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1378 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1380 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1382 * d30v-dis.c (print_insn): First operand of d*i (delayed
1383 branch) instructions is relative.
1385 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1386 (d30v_operand_table): Add IMM6S3 type.
1387 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1389 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1390 and cmp instructions.
1392 * d30v-opc.c: Correct entries for repeat*, and sat*.
1393 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1394 types. Correct several formats.
1396 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1398 * d30v-opc.c (pre_defined_registers): Change control registers.
1400 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1401 SHORT_C2. Manual was incorrect.
1403 * d30v-dis.c (lookup_opcode): Return value now indicates
1404 if an opcode has a short and a long form. Used for deciding
1405 to append a ".s" or ".l".
1406 (print_insn): Append a ".s" to an instruction if it is
1407 the short form and ".l" if it is a long form. Do not append
1408 anything if the instruction has only one possible size.
1410 * d30v-opc.c: Change mulx2h to require an even register.
1411 New form: SHORT_A2; a SHORT_A form that needs an even
1412 register as the first operand.
1414 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1415 instruction was not being disassembled if there were an odd
1416 number of instructions.
1418 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1421 start-sanitize-v850e
1422 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1424 * v850-dis.c (disassemble): Improved display of register lists.
1427 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1429 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1430 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1431 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1432 fandnot1s, fandnot2s.
1434 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1436 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1438 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1440 * cgen-asm.c (cgen_parse_address): New argument resultp.
1441 All callers updated.
1442 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1444 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1446 * mn10200-dis.c (disassemble): PC relative instructions are
1447 relative to the next instruction, not the current instruction.
1449 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1451 * v850-dis.c (disassemble): Only signed extend values that are not
1452 returned by extract functions.
1453 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1455 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1457 * v850-opc.c: Update comments. Remove use of
1458 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1460 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1462 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1464 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1466 * configure: Rebuilt with latest devo autoconf for NT support.
1468 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1470 * v850-dis.c (disassemble): Use curly brace syntax for register
1473 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1474 where r0 is being used as a destination register.
1476 start-sanitize-v850e
1477 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1479 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1482 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1484 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
1485 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
1486 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
1487 Add insns to access SGR and DBR.
1488 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
1490 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1492 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1494 start-sanitize-v850e
1495 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1497 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1498 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1501 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1503 * configure (cgen_files): Add support for v850e target.
1504 * configure.in (cgen_files): Add support for v850e target.
1506 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1508 * configure (cgen_files): Add support for v850ea target.
1509 * configure.in (cgen_files): Add support for v850ea target.
1512 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1514 * configure.in (bfd_arc_arch): Add.
1515 * configure: Rebuild.
1516 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1517 * Makefile.in: Rebuild.
1518 * arc-dis.c, arc-opc.c: New files.
1519 * disassemble.c (ARCH_all): Define ARCH_arc.
1520 (disassembler): Add ARC support.
1522 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1524 start-sanitize-v850e
1525 * v850-dis.c (disassemble): Add support for v850EA instructions.
1527 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1528 (v850_opcodes): Add v850EA instructions.
1530 * v850-dis.c (disassemble): Add support for v850E instructions.
1532 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1533 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1534 insert_spe, extract_spe): New Functions.
1535 (v850_opcodes): Add v850E instructions.
1538 * v850-opc.c: Reorganised and re-layed out to improve readability
1541 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1543 * configure: Rebuild with autoconf 2.12.1.
1545 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1547 * aclocal.m4, configure: Rebuild with new automake patches.
1549 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1551 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1552 * acinclude.m4: Just include acinclude.m4 from BFD.
1553 * aclocal.m4, configure: Rebuild.
1555 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1557 * Makefile.am: New file, based on old Makefile.in.
1558 * acconfig.h: New file.
1559 * acinclude.m4: New file.
1560 * stamp-h.in: New file.
1561 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1562 Removed shared library handling; now handled by libtool. Replace
1563 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1564 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1565 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1566 handling in AC_OUTPUT.
1567 * dep-in.sed: Change .o to .lo.
1568 * Makefile.in: Now built with automake.
1569 * aclocal.m4: Now built with aclocal.
1570 * config.in, configure: Rebuild.
1572 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1574 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1576 start-sanitize-r5900
1577 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
1579 * mips-opc.c: Fix coding of mtsa.
1582 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1584 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1586 * sparc-dis.c (sorted_opcodes): New static local.
1587 (struct opcode_hash): `opcode' is pointer to const element.
1588 (build_hash): First arg is now table of sorted pointers.
1589 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1590 (compare_opcodes): Update.
1592 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1594 * cgen-opc.c: #include <ctype.h>.
1595 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1596 Handle case insensitive hashing.
1597 (hash_keyword_value): Change type of `value' to unsigned int.
1599 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1601 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1602 precision FP, mark it as such. Likewise for double precision
1603 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1605 start-sanitize-r5900
1606 (mips_builtin_opcodes): Remove non-existant r5900 instructions
1609 start-sanitize-r5900
1610 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
1612 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
1613 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
1616 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1618 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1620 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1621 nesting depth when all the macros are expanded.
1623 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1625 * sparc-opc.c: The fcmp v9a instructions take an integer register
1626 as a destination, not a floating point register. From Christian
1627 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1629 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1631 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1632 syntax. From Roman Hodek
1633 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1635 * i386-dis.c (twobyte_has_modrm): Fix pand.
1637 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1639 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1641 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1643 * arm-dis.c: Add prototypes for arm_decode_shift and
1646 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
1648 * mips-opc.c: Add r3900 insns.
1650 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
1652 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
1653 print delay slot instructions on the same line. When using a PC
1654 relative load, add a comment with the value being loaded if it can
1657 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
1659 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
1660 to pushS/popS for segment regs and byte constant so that
1661 pushw/popw printed when in 16 bit data mode.
1663 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
1664 print cbtw, cwtd in 16 bit data mode.
1665 * i386-dis.c (putop): extra case W to support above.
1667 * i386-dis.c (print_insn_x86): print addr32 prefix when given
1668 address size prefix in 16 bit address mode.
1670 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
1672 * sh-dis.c: Reindent. Rename local variable fprintf to
1675 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
1677 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
1679 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
1681 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
1683 * mips16-opc.c (mip16_opcodes): same.
1685 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
1687 * m68k-opc.c (moveb): Change $d to %d.
1689 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
1691 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
1692 (twobyte_has_modrm): Likewise.
1694 (OP_MMX, OP_EM, OP_MS): New static functions.
1696 * i386-dis.c: Revert patch of April 4. The output now matches
1699 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
1701 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
1704 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
1706 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
1708 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
1710 * Makefile.in (install): Depend upon installdirs.
1711 (installdirs): New target.
1713 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
1715 From Thomas Graichen <graichen@rzpd.de>:
1716 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
1717 * configure: Rebuild.
1719 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
1721 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
1722 Delete string{,s}.h support.
1724 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
1726 * cgen-asm.c (cgen_parse_operand_fn): New global.
1727 (cgen_parse_{{,un}signed_integer,address}): Update call to
1728 cgen_parse_operand_fn.
1729 (cgen_init_parse_operand): New function.
1730 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
1731 from cgen_asm_init_parse.
1732 (m32r_cgen_assemble_insn): New operand `errmsg'.
1733 Delete call to as_bad, return error message to caller.
1734 (m32r_cgen_asm_hash_keywords): #if 0 out.
1736 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1738 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
1740 [case 'J']: Fix typo in register name.
1742 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
1744 * configure.in: Substitute SHLIB_LIBS.
1745 * configure: Rebuild.
1746 * Makefile.in (SHLIB_LIBS): New variable.
1747 ($(SHLIB)): Use $(SHLIB_LIBS).
1749 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
1751 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
1753 * cgen-opc.c (hash_keyword_name): Improve algorithm.
1755 * disassemble.c (disassembler): Handle m32r.
1757 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
1759 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
1760 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
1761 * Makefile.in (CFILES): Add them.
1762 (ALL_MACHINES): Add them.
1763 (dependencies): Regenerate.
1764 * configure.in (cgen_files): New variable.
1765 (bfd_m32r_arch): Add entry.
1766 * configure: Regenerate.
1768 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
1770 * configure.in: Correct file names for bfd_mn10[23]00_arch.
1771 * configure: Rebuild.
1773 * Makefile.in: Rebuild dependencies.
1775 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
1777 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
1780 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
1782 * Branched binutils 2.8.
1784 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
1786 * m10200-dis.c: Rename from mn10200-dis.c.
1787 * m10200-opc.c: Rename from mn10200-opc.c.
1788 * m10300-dis.c: Rename from mn10300-dis.c
1789 * m10300-opc.c: Rename from mn10300-opc.c.
1790 * Makefile.in: Update accordingly.
1792 * mips16-opc.c: Add mul and dmul macros.
1794 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
1796 * makefile.vms: Update CFLAGS, add clean target.
1798 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
1800 * mips-opc.c: Add "wait". From Ralf Baechle
1801 <ralf@gnu.ai.mit.edu>.
1803 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
1804 * configure, config.in: Rebuild.
1805 * sysdep.h: Include <stdlib.h> if it exists.
1806 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
1808 * Makefile.in: Rebuild dependencies.
1810 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
1812 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
1813 Andrew Bray <andy@madhouse.demon.co.uk>.
1815 * mips-opc.c: Add cast when setting mips_opcodes.
1817 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
1819 * v850-dis.c (disassemble): Fix sign extension problem.
1820 * v850-opc.c (extract_d*): Fix sign extension problems to make
1821 disassembly calculate branch offsets correctly.
1823 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
1825 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
1827 * mips-opc.c: Add dctr and dctw.
1830 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1832 * d30v-dis.c (print_insn): Change the way signed constants
1835 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
1837 * Makefile.in (BFD_H): New variable.
1838 (HFILES): New variable.
1839 (CFILES): Add all C files.
1840 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
1841 Delete old dependencies, and build new ones.
1842 * dep-in.sed: New file.
1844 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1846 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
1848 start-sanitize-coldfire
1849 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
1851 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
1854 end-sanitize-coldfire
1855 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
1857 * mn10200-opc.c: Change "trap" to "syscall".
1858 * mn10300-opc.c: Add new "syscall" instruction.
1860 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
1862 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
1863 mulul insns on the coldfire.
1865 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
1867 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
1868 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
1869 (print_insn_little_arm): Likewise.
1871 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
1873 Based on patches from H.J. Lu <hjl@lucon.org>:
1874 * i386-dis.c (fetch_data): Add prototype.
1875 * m68k-dis.c (fetch_data): Add prototype.
1876 (dummy_print_address): Add prototype. Make static.
1877 * ppc-opc.c (valid_bo): Add prototype.
1878 * sparc-dis.c (build_hash_table): Add prototype.
1879 (is_delayed_branch, compute_arch_mask): Add prototypes.
1880 (print_insn_sparc): Make several local variables const.
1881 (compare_opcodes): Change arguments to const PTR. Add prototype.
1882 * sparc-opc.c (arg): Change name field to be const.
1883 (lookup_name, lookup_value): Add prototypes. Change table and
1884 name parameters to be const.
1885 (sparc_encode_asi): Change name parameter to be const.
1886 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
1887 (sparc_encode_sparclet_cpreg): Likewise.
1888 (sparc_decode_asi): Change return type to be const.
1889 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
1890 (sparc_decode_sparclet_cpreg): Likewise.
1892 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
1894 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
1895 Solaris doesn't like the combined options, and the -f is
1897 (stamp-tshlink, install): Likewise.
1899 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
1901 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
1904 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
1906 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
1908 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
1910 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
1913 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1915 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
1917 start-sanitize-tic80
1918 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
1920 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
1922 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
1924 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
1927 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1929 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
1930 floatformat_to_double to make portable.
1931 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
1934 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
1936 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
1937 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
1939 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1941 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
1942 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
1944 start-sanitize-tic80
1945 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
1947 * tic80-opc.c (LSI_SCALED): Renamed from this ...
1948 (OFF_SL_BR_SCALED): ... to this, and added the flag
1949 TIC80_OPERAND_BASEREL to the flags word.
1950 (tic80_opcodes): Replace all occurances of LSI_SCALED with
1954 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
1956 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
1957 Change mips_opcodes from const array to a pointer,
1958 and change bfd_mips_num_opcodes from const int to int,
1959 so that we can increase the size of the mips opcodes table
1962 start-sanitize-tic80
1963 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
1965 * tic80-opc.c (tic80_predefined_symbols): Revert change to
1966 store BITNUM values in the table in one's complement form
1967 to match behavior when assembler is given a raw numeric
1968 value for a BITNUM operand.
1969 * tic80-dis.c (print_operand_bitnum): Ditto.
1973 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1975 * d30v-opc.c: Removed references to FLAG_X.
1978 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
1980 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
1983 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1985 * Makefile.in: Added d30v object files.
1986 * configure: (bfd_d30v_arch) Rebuilt.
1987 * configure.in: (bfd_d30v_arch) Added new case.
1988 * d30v-dis.c: New file.
1989 * d30v-opc.c: New file.
1990 * disassemble.c (disassembler) Add entry for d30v.
1993 start-sanitize-tic80
1994 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
1996 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
1997 representations for the floating point BITNUM values.
1999 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2001 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2002 in the table in one's complement form, as they appear in the
2004 (tic80_symbol_to_value): Use macros to access predefined
2006 (tic80_value_to_symbol): Ditto.
2007 (tic80_next_predefined_symbol): New function.
2008 * tic80-dis.c (print_operand_bitnum): Remove code that did
2009 one's complement for BITNUM values.
2012 start-sanitize-r5900
2013 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
2015 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
2018 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2020 * makefile.vms: Remove 8 bit characters. Update to latest
2023 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2025 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2027 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2029 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2030 (IMM24_PCREL): Likewise.
2032 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2034 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2035 address for an extended PC relative instruction that is not a
2038 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2040 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2043 start-sanitize-tic80
2044 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2046 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2047 (tic80_opcodes): Sort entries so that long immediate forms
2048 come after short immediate forms, making it easier for
2049 assembler to select the right one for a given operand.
2052 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2054 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2056 (print_insn_mips16): Likewise.
2058 start-sanitize-r5900
2059 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
2061 * mips-opc.c: add r5900.
2064 start-sanitize-tic80
2065 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2067 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2068 a symbol class that restricts translation to just that
2069 class (general register, condition code, etc).
2071 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2073 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2074 and REG_DEST_E for register operands that have to be
2075 an even numbered register. Add REG_FPA for operands that
2076 are one of the floating point accumulator registers.
2077 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2078 (tic80_opcodes): Change entries that need even numbered
2079 register operands to use the new operand table entries.
2080 Add "or" entries that are identical to "or.tt" entries.
2083 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2085 * mips16-opc.c: Add new cases of exit instruction for
2087 * mips-dis.c (print_mips16_insn_arg): Display floating point
2088 registers in operands of exit instruction. Print `$' before
2089 register names in operands of entry and exit instructions.
2091 start-sanitize-tic80
2092 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2094 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2095 pairs for all predefined symbols recognized by the assembler.
2096 Also used by the disassembling routines.
2097 (tic80_symbol_to_value): New function.
2098 (tic80_value_to_symbol): New function.
2099 * tic80-dis.c (print_operand_control_register,
2100 print_operand_condition_code, print_operand_bitnum):
2101 Remove private tables and use tic80_value_to_symbol function.
2104 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2106 * d10v-dis.c (print_operand): Change address printing
2107 to correctly handle PC wrapping. Fixes PR11490.
2109 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2111 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2114 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2116 * mips-dis.c (print_insn_mips16): Set insn_info information.
2117 (print_mips16_insn_arg): Likewise.
2119 * mips-dis.c (print_insn_mips16): Better handling of an extend
2120 opcode followed by an instruction which can not be extended.
2122 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2124 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2125 coldfire moveb instruction to not allow an address register as
2126 destination. Although the documentation does not indicate that
2127 this is invalid, experiments uncovered unexpected behavior.
2128 Added a comment explaining the situation. Thanks to Andreas
2129 Schwab for pointing this out to me.
2131 start-sanitize-tic80
2132 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2134 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2135 entries are presorted so that entries with the same mnemonic are
2136 adjacent to each other in the table. Sort the entries for each
2137 instruction so that this is true.
2140 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2142 * m68k-dis.c: Include <libiberty.h>.
2143 (print_insn_m68k): Sort the opcode table on the most significant
2144 nibble of the opcode.
2146 start-sanitize-tic80
2147 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2149 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2150 "vsub", "vst", "xnor", and "xor" instructions.
2151 (V_a1): Renamed from V_a, msb of accumulator reg number.
2152 (V_a0): Add macro, lsb of accumulator reg number.
2154 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2156 * tic80-dis.c (print_insn_tic80): Broke excessively long
2157 function up into several smaller ones and arranged for
2158 the instruction printing function to be callable recursively
2159 to print vector instructions that have both a load and a
2160 math instruction packed into a single opcode.
2161 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2162 to explain why it comes after the other vector opcodes.
2165 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2167 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2168 move insns to handle immediate operands.
2170 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2172 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2173 fix operand mask in the "moveml" entries for the coldfire.
2175 start-sanitize-tic80
2176 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2178 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2179 New macros for building vector instruction opcodes.
2180 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2181 FMT_LI, which were unused. The field is now a flags field.
2182 Remove some opcodes that are possible, but illegal, such
2183 as long immediate instructions with doubles for immediate
2184 values. Add "vadd" and "vld" instructions.
2186 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2188 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2189 the order more logical. Move the shift alias instructions ("rotl",
2190 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2191 interspersed with the regular sr.x and sl.x instructions. Add
2192 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2193 "sub", "subu", "swcr", and "trap".
2195 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2197 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2198 (OFF_SL_PC): Renamed from OFF_SL.
2199 (OFF_SS_BR): New operand type for base relative operand.
2200 (OFF_SL_BR): New operand type for base relative operand.
2201 (REG_BASE): New operand type for base register operand.
2202 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2203 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2204 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2206 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2207 10 char field, padded with spaces on rhs, rather than a string
2208 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2209 than old TIC80_OPERAND_RELATIVE. Add support for new
2210 TIC80_OPERAND_BASEREL flag bit.
2212 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2214 * tic80-dis.c (print_insn_tic80): Print floating point operands
2216 * tic80-opc.c (SPFI): Add single precision floating point
2217 immediate operand type.
2218 (ROTATE): Add rotate operand type for shifts.
2219 (ENDMASK): Add for shifts.
2220 (n): Macro for the 'n' bit.
2221 (i): Macro for the 'i' bit.
2222 (PD): Macro for the 'PD' field.
2223 (P2): Macro for the 'P2' field.
2224 (P1): Macro for the 'P1' field.
2225 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2229 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2231 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2232 adding in current address for pc-relative operands.
2234 start-sanitize-tic80
2235 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2237 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2238 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2239 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2240 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2241 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2242 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2243 (REG_SCALED, LSI_SCALED): New operand types.
2244 (E): New macro for 'E' bit at bit 27.
2245 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2246 opcodes, including the various size flavors (b,h,w,d) for
2247 the direct load and store instructions.
2249 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2251 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2253 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2254 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2255 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2256 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2257 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2258 masks with "MASK_* & ~M_*" to get the M bit reset.
2259 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2261 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2263 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2264 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2265 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2267 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2268 CC, SICR, and LICR table entries.
2269 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2270 "bcnd", and "brcr" opcodes.
2273 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2275 * ppc-opc.c (powerpc_operands): Make comment match the
2276 actual fields (no shift field).
2277 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2278 start-sanitize-tic80
2279 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2280 partial implementation, work in progress.
2281 * tic80-opc.c (tic80_operands): Begin construction operands table.
2282 (tic80_opcodes): Continue populating opcodes table and start
2283 filling in the operand indices.
2284 (tic80_num_opcodes): Add this.
2287 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2289 * m68k-opc.c: Add #B case for moveq.
2291 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2293 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2294 before they are used.
2296 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2298 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2299 for "breakpoint" instruction.
2301 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2303 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2304 (dep): Use ALL_CFLAGS rather than CFLAGS.
2306 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2308 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2311 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2313 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2314 start-sanitize-tic80
2315 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2318 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2320 * mips16-opc.c: Add "abs".
2322 start-sanitize-tic80
2323 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2325 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2326 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2327 (disassembler): Add bfd_arch_tic80 support to set disassemble
2328 to print_insn_tic80.
2329 * tic80-dis.c (print_insn_tic80): Add stub.
2331 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2333 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2334 * configure: Regenerate with autoconf.
2335 * tic80-dis.c: Add file.
2336 * tic80-opc.c: Add file.
2339 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2341 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2343 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2345 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2346 (mn10200_opcodes): Use it for some logicals and btst insns.
2347 Add "break" and "trap" instructions.
2349 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2351 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2353 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2355 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2356 relative load or add now depends upon whether the instruction is
2359 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2361 * mn10200-dis.c: Finish writing disassembler.
2362 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2363 Fix mask for "jmp (an)".
2365 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2366 handle endianness issues for mn10300.
2368 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2370 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2372 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2373 instruction. Fix opcode field for "movb (imm24),dn".
2375 * mn10200-opc.c (mn10200_operands): Fix insertion position
2378 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2380 * mn10200-opc.c: Create mn10200 opcode table.
2381 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2382 but moving along nicely.
2384 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2386 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2388 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2390 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2391 specifiers for fmovem* instructions.
2393 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2395 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2397 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2399 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2402 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2404 * mn10300-opc.c: Add some comments explaining the various
2407 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2409 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2411 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2414 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2415 operand specifiers in fmovm* instructions.
2417 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2419 * ppc-opc.c (insert_li): Give an error if the offset has the two
2420 least significant bits set.
2422 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2424 * mips-dis.c (print_insn_mips16): Separate the instruction from
2425 the arguments with a tab, not a space.
2427 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2429 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2432 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2435 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2437 * configure: Rebuild with autoconf 2.12.
2439 Add support for mips16 (16 bit MIPS implementation):
2440 * mips16-opc.c: New file.
2441 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2442 (mips16_reg_names): New static array.
2443 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2444 after seeing a 16 bit symbol.
2445 (print_insn_little_mips): Likewise.
2446 (print_insn_mips16): New static function.
2447 (print_mips16_insn_arg): New static function.
2448 * mips-opc.c: Add jalx instruction.
2449 * Makefile.in (mips16-opc.o): New target.
2450 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2451 * configure: Rebuild.
2453 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2455 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2456 operand specifiers in *save, *restore and movem* instructions.
2458 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2461 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2462 register operands for immediate arithmetic, not, neg, negx, and
2463 set according to condition instructions.
2465 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2466 specifier of the effective-address operand in immediate forms of
2467 arithmetic instructions. The specifier for the immediate operand
2468 notes how and where the constant will be stored.
2470 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2472 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2475 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2478 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2480 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2482 * mn10300-dis.c (disassemble): Handle register lists.
2484 * mn10300-opc.c: Fix handling of register list operand for
2485 "call", "ret", and "rets" instructions.
2487 * mn10300-dis.c (disassemble): Print PC-relative and memory
2488 addresses symbolically if possible.
2489 * mn10300-opc.c: Distinguish between absolute memory addresses,
2490 pc-relative offsets & random immediates.
2492 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2494 (disassemble): Handle SPLIT and EXTENDED operands.
2496 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2498 * mn10300-dis.c: Rough cut at printing some operands.
2500 * mn10300-dis.c: Start working on disassembler support.
2501 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2503 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2505 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2507 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2509 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2511 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2513 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2514 register argument is calls and jmp instructions.
2516 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2518 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2519 getx operand. Fix opcode for mulqu imm,dn.
2521 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2523 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2524 in MN10300_OPERAND_SPLIT operands for how many bits
2525 appear in the basic insn word. Add IMM32_HIGH24,
2526 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2527 (mn10300_opcodes): Use new operands as needed.
2529 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2530 for bset, bclr, btst instructions.
2531 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2533 * mn10300-opc.c (mn10300_operands): Remove many redundant
2534 operands. Update opcode table as appropriate.
2535 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2536 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2538 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2540 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2541 operands (for indexed load/stores). Fix bitpos for DI
2542 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2543 few instructions that insert immediates/displacements in the
2544 middle of the instruction. Add IMM8E for 8 bit immediate in
2545 the extended part of an instruction.
2546 (mn10300_operands): Use new opcodes as appropriate.
2548 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2550 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2551 sequential so the assembler never parallelizes it with
2554 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2556 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2557 a data/address register that appears in register field 0
2558 and register field 1.
2559 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2561 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2563 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2564 standard disassembly.
2566 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2567 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2568 Recategorize PALcode instructions.
2570 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2572 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2574 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2576 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2577 there are no operand types.
2579 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2581 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2583 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2585 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2587 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2589 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2591 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2592 and sst.w instructions.
2594 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2597 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2599 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2602 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2604 * ppc-opc.c (PPCPWR2): Define.
2605 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2608 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2610 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2611 field for movhu instruction.
2613 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2614 cast value to "long" not "signed long" to keep hpux10
2617 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2619 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2622 * mn10300-opc.c (FMT*): Remove definitions.
2624 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2625 for shift-by-register opcodes.
2627 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2628 into [AD][MN][01] for encoding the position of the register
2631 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2633 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2634 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2636 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2638 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2639 Fix various typos. Add "PAREN" operand.
2640 (MEM, MEM2): Define.
2641 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2642 operands. Fix several typos.
2644 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2647 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2649 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2650 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2652 (mn10300_opcodes): Break opcode format out into its own field.
2653 Update many operand fields to deal with signed vs unsigned
2654 issues. Fix one or two typos in the "mov" instruction
2655 opcode, mask and/or operand fields.
2657 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2659 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2660 m68851 wasn't reset.
2662 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2664 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2665 all opcodes. Very rough cut at operands for all opcodes.
2667 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2670 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2672 * mn10200-opc.c, mn10300-opc.c: New files.
2673 * mn10200-dis.c, mn10300-dis.c: New files.
2674 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2675 * disassemble.c: Break mn10x00 support into 10200 and 10300
2677 * configure.in: Likewise.
2678 * configure: Rebuilt.
2680 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2682 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2684 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
2686 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2688 * disassemble (ARCH_mn10x00): Define.
2689 (disassembler): Handle bfd_arch_mn10x00.
2690 * configure.in: Recognize bfd_mn10x00_arch.
2691 * configure: Rebuilt.
2693 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
2695 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
2696 accordingly. Don't declare functions using op_rtn.
2698 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
2700 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
2701 params to be more standard.
2702 * (disassemble): Print absolute addresses and symbolic names for
2703 branch and jump targets.
2704 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
2706 * (v850_opcodes): Add breakpoint insn.
2708 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
2710 * m68k-opc.c: Move the fmovemx data register cases before the
2711 other cases, so that they get recognized before the data register
2712 does gets treated as a degenerate register list.
2714 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
2716 * mips-opc.c: Add a case for "div" and "divu" with two registers
2717 and a destination of $0.
2719 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
2721 * mips-dis.c (print_insn_arg): Add prototype.
2722 (_print_insn_mips): Ditto.
2724 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
2726 * mips-dis.c (print_insn_arg): Print condition code registers as
2729 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
2731 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
2733 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
2735 * v850-dis.c (disassemble): Make static. Provide prototype.
2737 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
2739 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
2742 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
2744 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
2745 ']' characters into the output stream.
2746 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
2747 Add "memop" field to all opcodes (for the disassembler).
2748 Reorder opcodes so that "nop" comes before "mov" and "jr"
2749 comes before "jarl".
2751 * v850-dis.c (print_insn_v850): Fix typo in last change.
2753 * v850-dis.c (print_insn_v850): Properly handle disassembling
2754 a two byte insn at the end of a memory region when the memory
2755 region's size is only two byte aligned.
2757 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
2759 * v850-dis.c (v850_reg_names): Define.
2760 (v850_sreg_names, v850_cc_names): Likewise.
2761 (disassemble): Very rough cut at printing operands (unformatted).
2763 * v850-opc.c (BOP_MASK): Fix.
2764 (v850_opcodes): Fix mask for jarl and jr.
2766 * v850-dis.c: New file. Skeleton for disassembler support.
2767 * Makefile.in Remove v850 references, they're not needed here.
2768 * configure.in: Add v850-dis.o when building v850 toolchains.
2769 * configure: Rebuilt.
2770 * disassemble.c (disassembler): Call v850 disassembler.
2772 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
2773 (insert_d8_6, extract_d8_6): New functions.
2774 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
2775 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
2777 (IF4A, IF4B): Use "D7" instead of "D7S".
2778 (IF4C, IF4D): Use "D8_7" instead of "D8".
2779 (IF4E, IF4F): New. Use "D8_6".
2780 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
2781 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
2783 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
2784 (v850_operands): Change D16 to D16_15, use special insert/extract
2785 routines. New new D16 that uses the generic insert/extract code.
2786 (IF7A, IF7B): Use D16_15.
2787 (IF7C, IF7D): New. Use D16.
2788 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
2790 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
2791 message. Issue an error if the branch offset is odd.
2793 * v850-opc.c: Add notes about needing special insert/extract
2794 for all the load/store insns, except "ld.b" and "st.b".
2796 * v850-opc.c (insert_d22, extract_d22): New functions.
2797 (v850_operands): Use insert_d22 and extract_d22 for
2799 (insert_d9): Fix range check.
2801 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2803 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
2804 and set bits field to D9 and D22 operands.
2806 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
2808 * v850-opc.c (v850_operands): Define SR2 operand.
2809 (v850_opcodes): "ldsr" uses R1,SR2.
2811 * v850-opc.c (v850_opcodes): Fix opcode specs for
2812 sld.w, sst.b, sst.h, sst.w, and nop.
2814 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
2816 * v850-opc.c (v850_opcodes): Add null opcode to mark the
2817 end of the opcode table.
2819 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2821 * d10v-opc.c (pre_defined_registers): Added register pairs,
2822 "r0-r1", "r2-r3", etc.
2824 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
2826 * v850-opc.c (v850_operands): Make I16 be a signed operand.
2827 Create I16U for an unsigned 16bit mmediate operand.
2828 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
2830 * v850-opc.c (v850_operands): Define EP operand.
2831 (IF4A, IF4B, IF4C, IF4D): Use EP.
2833 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
2834 with immediate operand, "movhi". Tweak "ldsr".
2836 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
2837 correct. Get sld.[bhw] and sst.[bhw] closer.
2839 * v850-opc.c (v850_operands): "not" is a two byte insn
2841 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
2843 * v850-opc.c (v850_operands): D16 inserts at offset 16!
2845 * v850-opc.c (two): Get order of words correct.
2847 * v850-opc.c (v850_operands): I16 inserts at offset 16!
2849 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
2850 register source and destination operands.
2851 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
2853 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
2854 same thinko in "trap" opcode.
2856 * v850-opc.c (v850_opcodes): Add initializer for size field
2859 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
2860 Add D8 for 8-bit unsigned field in short load/store insns.
2861 (IF4A, IF4D): These both need two registers.
2862 (IF4C, IF4D): Define. Use 8-bit unsigned field.
2863 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
2864 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
2865 for "ldsr" and "stsr".
2866 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
2869 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
2870 short store word (sst.w).
2872 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2874 * v850-opc.c (v850_operands): Added insert and extract fields,
2875 pointers to functions that handle unusual operand encodings.
2877 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
2879 * v850-opc.c (v850_opcodes): Enable "trap".
2881 * v850-opc.c (v850_opcodes): Fix order of displacement
2882 and register for "set1", "clr1", "not1", and "tst1".
2884 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
2886 * v850-opc.c (v850_operands): Add "B3" support.
2887 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
2890 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
2892 * v850-opc.c: Close unterminated comment.
2894 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2896 * v850-opc.c (v850_operands): Add flags field.
2897 (v850_opcodes): add move opcodes.
2899 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2901 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
2902 * configure: (bfd_v850v_arch) Add new case.
2903 * configure.in: (bfd_v850_arch) Add new case.
2904 * v850-opc.c: New file.
2906 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
2908 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
2910 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2912 * d10v-opc.c: Add additional information to the opcode
2913 table to help determinine which instructions can be done
2916 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
2918 * mpw-make.sed: Update editing of include pathnames to be
2921 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
2923 * arm-opc.h: Added "bx" instruction definition.
2925 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
2927 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
2929 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2931 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
2933 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2935 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
2937 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
2939 * makefile.vms: Update for alpha-opc changes.
2941 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
2943 * i386-dis.c (print_insn_i386): Actually return the correct value.
2944 (ONE, OP_ONE): #ifdef out; not used.
2946 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2948 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
2949 Changed subi operand type to treat 0 as 16.
2951 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
2953 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
2956 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
2958 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
2959 memory transfer instructions. Add new format string entries %h and %s.
2960 * arm-dis.c: (print_insn_arm): Provide decoding of the new
2963 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2965 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
2966 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
2968 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
2970 * alpha-dis.c (print_insn_alpha_osf): Remove.
2971 (print_insn_alpha_vms): Remove.
2972 (print_insn_alpha): Make globally visible. Chose the register
2973 names based on info->flavour.
2974 * disassemble.c: Always return print_insn_alpha for the alpha.
2976 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2978 * d10v-dis.c (dis_long): Handle unknown opcodes.
2980 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2982 * d10v-opc.c: Changes to support signed and unsigned numbers.
2983 All instructions with the same name that have long and short forms
2984 now end in ".l" or ".s". Divs added.
2985 * d10v-dis.c: Changes to support signed and unsigned numbers.
2987 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2989 * d10v-dis.c: Change all functions to use info->print_address_func.
2991 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2993 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
2994 move ccr/sr insns more strict so that the disassembler only
2995 selects them when the addressing mode is data register.
2997 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2998 * d10v-opc.c (pre_defined_registers): Declare.
2999 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3000 to pick a better name for the registers.
3002 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3004 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3005 operands for fexpand and fpmerge. From Christian Kuehnke
3006 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3008 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3010 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3011 print routine. Take new regnames and cpumask arguments.
3012 Kill the environment variable nonsense.
3013 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3014 (print_insn_alpha_vms): New function. Do VMS style regnames.
3015 * disassemble.c (disassembler): Test bfd flavour to pick
3016 between OSF and VMS routines. Default to OSF.
3018 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3020 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3021 * configure: Rebuild.
3022 * Makefile.in (install): Use @INSTALL_SHLIB@.
3024 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3026 * configure: (bfd_d10v_arch) Add new case.
3027 * configure.in: (bfd_d10v_arch) Add new case.
3028 * d10v-dis.c: New file.
3029 * d10v-opc.c: New file.
3030 * disassemble.c (disassembler) Add entry for d10v.
3032 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3034 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3035 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3037 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3039 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3040 distinguish between variants of the instruction set.
3041 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3042 distinguish between variants of the instruction set.
3044 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3046 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3047 the 8086 instruction set.
3048 * i386-dis.c: General cleanups. Make most things static. Add
3049 prototypes. Get rid of static variables aflags and dflags. Pass
3050 them as args (to almost everything).
3052 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3054 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3056 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3058 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3059 if the next arg is marked with SRC_IN_DST. Gross.
3061 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3062 we're looking for and find EXR.
3064 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3065 if we're looking for KBIT and we don't find it.
3067 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3070 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3071 3bit immediate operands.
3073 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3075 * Released binutils 2.7.
3077 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3078 <kkaempf@progis.ac-net.de>.
3080 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3082 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3084 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3086 * sparc-dis.c (print_insn_sparclite): New routine to print
3087 sparclite instructions.
3089 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3091 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3093 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3095 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3096 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3097 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3099 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3101 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3102 Use autoconf-set values.
3103 (docdir, oldincludedir): Removed.
3104 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3106 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3108 * alpha-opc.c: New file.
3109 * alpha-opc.h: Remove.
3110 * alpha-dis.c: Complete rewrite to use new opcode table.
3111 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3112 * configure: Rebuild with autoconf 2.10.
3113 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3114 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3116 (alpha-opc.o): New target.
3118 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3120 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3121 Set imm_added_to_rs1 even if the source and destination register
3124 * sparc-opc.c: Add some two operand forms of the wr instruction.
3126 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3128 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3131 * disassemble.c (disassembler): Handle H8/S.
3132 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3134 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3136 * sparc-opc.c: Add beq/teq as aliases for be/te.
3138 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3139 <sergei@msil.sps.mot.com>.
3141 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3143 * makefile.vms: New file.
3145 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3147 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3149 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3152 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3154 * i386-dis.c (OP_OFF): Call append_prefix.
3156 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3158 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3159 unsigned long to silence a warning from the Solaris PowerPC
3162 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3164 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3166 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3168 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3170 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3171 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3172 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3173 cpush, cpusha, cpull sparclet insns.
3175 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3177 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3179 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3181 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3182 Set F_FLOAT on other floating point instructions.
3184 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3186 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3188 (powerpc_opcodes): Add 860/821 specific SPRs.
3190 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3192 * configure.in: Permit --enable-shared to specify a list of
3193 directories. Set and substitute BFD_PICLIST.
3194 * configure: Rebuild.
3195 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3196 uses. Set to @BFD_PICLIST@.
3198 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3200 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3201 not "abs", which may be needed for the absolute in something
3202 like btst #0,@10:8. Print L_3 immediates separately from other
3203 immediates. Change ABSMOV reference to ABS8MEM.
3205 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3207 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3208 (current_arch_mask): New static global.
3209 (compute_arch_mask): New static function.
3210 (print_insn_sparc): Delete sparc_v9_p. New static local
3211 current_mach. Resort opcode table if current_mach changes.
3212 Generalize "insn not supported" test.
3213 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3214 Delete test for v9/!v9.
3215 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3217 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3218 (brfcx): Renamed to FBRX.
3219 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3220 coprocessor mnemonics are not supported on the sparclet).
3221 (condf): Renamed to CONDF.
3222 (SLCBCC2): Delete F_ALIAS flag.
3224 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3226 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3227 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3229 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3231 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3232 that the shared library version number is set correctly.
3234 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3236 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3237 Miles Bader <miles@gnu.ai.mit.edu>.
3238 * configure: Rebuild.
3240 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3242 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3245 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3247 * configure: Rebuild with autoconf 2.8.
3249 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3251 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3252 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3254 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3256 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3257 since they appear as targets in Makefile.in.
3258 * configure: Rebuild.
3260 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3262 * mpw-make.sed: Edit out shared library support bits.
3264 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3266 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3267 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3268 (sparc_opcodes): Add sparclet insns.
3269 (sparclet_cpreg_table): New static local.
3270 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3271 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3273 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3275 * i386-dis.c (index16): New static variable.
3276 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3278 (OP_indirE): Return result of OP_E.
3279 (OP_E): Check for 16 bit addressing mode, and disassemble
3280 correctly. Optimised 32 bit case a little. Don't print
3281 "(base,index,scale)" when sib specifies only an offset.
3283 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3285 * configure.in: Set and substitute SHLIB_DEP.
3286 * configure: Rebuild.
3287 * Makefile.in (SHLIB_DEP): New variable.
3288 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3289 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3290 COMMON_SHLIB, add them to piclist with appropriate modifications.
3291 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3292 here: just use piclist.
3294 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3296 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3297 (print_insn_sparc): Rewrite v9/not-v9 tests.
3298 (compare_opcodes): Likewise.
3299 * sparc-opc.c (MASK_<ARCH>): Define.
3300 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3301 (sparclet,v6notv9): Define.
3302 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3303 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3305 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3307 * configure.in: Call AC_PROG_CC before configure.host.
3308 * configure: Rebuild.
3310 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3312 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3314 * i386-dis.c (onebyte_has_modrm): New static array.
3315 (twobyte_has_modrm): New static array.
3316 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3318 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3320 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3323 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3325 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3328 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3330 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3331 m68010up, not just m68020up | cpu32.
3333 * Makefile.in (SONAME): New variable.
3334 ($(SHLINK)): Make a link to the transformed name, as well.
3335 (stamp-tshlink): New target.
3336 (install): Skip stamp-tshlink during install.
3338 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3340 * configure.in: Call AC_ARG_PROGRAM.
3341 * configure: Rebuild.
3342 * Makefile.in (program_transform_name): New variable.
3343 (install): Transform library name before installing it.
3345 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3347 * i960-dis.c (mem): Add HX dcinva instruction.
3349 Support for building as a shared library, based on patches from
3350 Alan Modra <alan@spri.levels.unisa.edu.au>:
3351 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3352 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3353 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3354 * configure: Rebuild.
3355 * Makefile.in (ALLLIBS): New variable.
3356 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3357 (COMMON_SHLIB, SHLINK): New variables.
3358 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3359 (STAGESTUFF): Remove variable.
3360 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3361 (stamp-piclist, piclist): New targets.
3362 ($(SHLIB), $(SHLINK)): New targets.
3363 ($(OFILES)): Depend upon stamp-picdir.
3364 (disassemble.o): Build twice if PICFLAG is set.
3365 (MOSTLYCLEAN): Add pic/*.o.
3366 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3367 (distclean): Remove pic and stamp-picdir.
3368 (install): Install shared libraries.
3369 (stamp-picdir): New target.
3371 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3373 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3374 Print unknown instruction as "unknown", rather than in hex.
3376 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3378 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3380 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3382 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3384 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3386 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3387 when necessary. From Ulrich Drepper
3388 <drepper@myware.rz.uni-karlsruhe.de>.
3390 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3392 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3393 sparc_num_opcodes. Update architecture enum values.
3394 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3395 (sparc_opcode_lookup_arch): New function.
3396 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3397 (sparc_opcodes): Add v9a shutdown insn.
3399 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3401 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3402 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3404 (print_insn_sparc64): Deleted.
3405 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3408 * sparc-opc.c (architecture_pname): Add v9a.
3410 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3412 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3413 incorrectly defined as 0x16 when it should be 0x15.
3414 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3415 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3416 excb (exception barrier) which is defined in the Alpha
3417 Architecture Handbook version 2.
3418 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3419 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3420 disassembled as or, for example.
3422 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3424 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3425 (_print_insn_mips): Change i from int to unsigned int.
3427 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3429 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3430 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3432 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3434 * i386-dis.c: Added Pentium Pro instructions.
3436 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3438 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3441 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3443 * sh-opc.h (sh_nibble_type): Added REG_B.
3444 (sh_arg_type): Added A_REG_B.
3445 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3447 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3449 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3451 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3453 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3455 * Makefile.in (distclean): Remove stamp-h. From Ronald
3456 F. Guilmette <rfg@monkeys.com>.
3458 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3460 From David Mosberger-Tang <davidm@azstarnet.com>:
3461 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3464 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3466 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3467 (sh_table): Added many SH3 opcodes.
3468 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3470 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3472 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3473 (subco,subco.): Mark this PPC, not PPCCOM.
3475 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3477 * configure: Rebuild with autoconf 2.7.
3479 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3481 * configure: Rebuild with autoconf 2.6.
3483 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3485 * configure.in: Sort list of architectures. Accept but do nothing
3486 for alliant, convex, pyramid, romp, and tahoe.
3488 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3490 * a29k-dis.c (print_special): Change num to unsigned int.
3492 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3494 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3497 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3499 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3500 * configure: Rebuilt.
3502 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3504 * configure.in: Add case for bfd_i860_arch.
3505 * configure: Rebuild.
3507 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3509 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3510 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3511 (NEXTDOUBLE): Likewise.
3512 (print_insn_m68k): Don't match fmoveml if there is more than one
3513 register in the list.
3514 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3516 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3518 * m68k-opc.c: Use #W rather than #w.
3519 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3521 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3523 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3524 and likewise for all the dbxx opcodes.
3526 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3528 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3530 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3532 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3533 the VR4100 specific instructions to the mips_opcodes structure.
3535 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3537 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3538 ugly Metrowerks bug in CW6, is fixed in CW7.
3540 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3542 * ppc-opc.c (whole file): Add flags for common/any support.
3544 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3546 * Makefile.in (BISON): Remove macro.
3547 (FLAGS_TO_PASS): Remove BISON.
3549 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3551 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3553 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3554 instructions that take no args by looking at the match mask.
3555 (print_insn_arg): Always print "%" before register names.
3556 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3557 [case '_']: Don't print "@#" before address.
3558 [case 'J']: Use "%s" as format string, not register name.
3559 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3561 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3563 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3566 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3568 From David Mosberger-Tang <davidm@azstarnet.com>
3570 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3571 (alpha_insn_set): added definitions for VAX floating point
3572 instructions (Unix compilers don't generate these, but handcoded
3573 assembly might still use them).
3575 * alpha-dis.c (print_insn_alpha): added support for disassembling
3576 the miscellaneous instructions in the Alpha instruction set.
3578 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3580 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3581 no longer create sysdep.h, sed ppc-opc.c to work around a
3582 serious Metrowerks C bug.
3583 * mpw-make.in: Remove.
3584 * mpw-make.sed: New file, used by mpw-configure to edit
3585 Makefile.in into an MPW makefile.
3587 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3589 * Makefile.in (maintainer-clean): New synonym for realclean.
3591 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3593 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3594 which use '0', '1', and '2' instead. Specify the proper size for
3595 a pmove immediate operand. Correct the pmovefd patterns to be
3596 moves to a register, not from a register.
3597 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3599 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3601 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3602 %psr, %wim, %tbr as F_NOTV9.
3604 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3606 * Makefile.in (Makefile): Just rebuild Makefile when running
3608 (config.h, stamp-h): New targets.
3609 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3610 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3611 rebuilding config.h.
3612 * configure: Rebuild.
3614 * mips-opc.c: Change unaligned loads and stores with "t,A"
3615 operands to use "t,A(b)".
3617 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3619 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3621 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3623 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3624 until 3 instead of until 2.
3626 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3628 * Makefile.in (ALL_CFLAGS): Define.
3629 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3630 (MOSTLYCLEAN): Add config.log.
3631 (distclean): Don't remove config.log.
3632 * configure.in: Substitute HDEFINES.
3633 * configure: Rebuild.
3635 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3637 * sh-opc.h (sh_arg_type): Add F_FR0.
3638 (sh_table, case fmac): Add F_FR0 as first argument.
3640 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3642 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3644 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3646 * sparc-dis.c: Remove all references to NO_V9.
3648 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3650 * aclocal.m4: Just include ../bfd/aclocal.m4.
3651 * configure: Rebuild.
3653 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3655 * sparc-dis.c (X_DISP19): Define.
3656 (print_insn, case 'G'): Use it.
3657 (print_insn, case 'L'): Sign extend displacement.
3659 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3661 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3662 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3663 host_makefile_frag or frags.
3664 * aclocal.m4: New file.
3665 * configure: Rebuild.
3666 * Makefile.in (INSTALL): Set to @INSTALL@.
3667 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3668 (INSTALL_DATA): Set to @INSTALL_DATA@.
3670 (AR_FLAGS): Set to rc rather than qc.
3671 (CC): Define as @CC@.
3672 (CFLAGS): Set to @CFLAGS@.
3673 (@host_makefile_frag@): Remove.
3674 (config.status): Remove dependency upon @frags@.
3676 * configure.in: ../bfd/config.bfd now just sets shell variables.
3677 Use them rather than looking through target Makefile fragments.
3678 * configure: Rebuild.
3680 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3682 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3684 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
3686 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3687 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3690 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3691 (lookup_{name,value}): New functions.
3692 (prefetch_table): New static local.
3693 (sparc_{encode,decode}_prefetch): New functions.
3694 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3696 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3698 * sh-opc.h: Add blank lines to improve readabililty of sh3e
3701 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3703 * sh-dis.c: Correct comment on first line of file.
3705 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
3707 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
3709 * sparc-opc.c (asi, membar): New static locals.
3710 (sparc_{encode,decode}_{asi,membar}): New functions.
3711 (sparc_opcodes, membar insn): Fix.
3712 * sparc-dis.c (print_insn): Call sparc_decode_asi.
3713 Support decoding of membar masks.
3716 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
3718 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
3720 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
3722 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
3723 and likewise for the other branches. Add bhs as an alias for bcc,
3724 and likewise for the size variants. Add dbhs as an alias for
3727 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
3729 * sh-opc.h (FP sts instructions): Update to match reality.
3731 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
3733 * m68k-dis.c: (fpcr_names): Add % before all register names.
3734 (reg_names): Likewise.
3735 (print_insn_arg): Don't explicitly print % before register names.
3736 Add % before register names in static array names. In case 'r',
3737 print data registers as `@(Dn)', not `Dn@'. When printing a
3738 memory address, don't print @# before it.
3739 (print_indexed): Change base_disp and outer_disp from int to
3740 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
3741 syntax. Sign extend 8 byte displacement correctly.
3742 (print_base): Print using MIT syntax. Print zpc when appropriate.
3743 Change parameter disp from int to bfd_vma.
3745 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
3748 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
3750 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
3751 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
3752 * sh-opc.h (sh_arg_type): Add new operand types.
3753 (sh_table): Add new opcodes from SH3E Floating Point ISA.
3755 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3757 * Makefile.in (distclean): Remove generated file config.h.
3759 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3761 * Makefile.in (distclean): Remove generated file config.h.
3763 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
3765 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
3767 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
3769 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
3770 rather than numopcodes. Use m68k_opcodes rather than removed
3771 opcode function. Don't check F_ALIAS.
3772 (print_insn_arg): Change first parameter to be const char *.
3773 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
3774 (m68k-opc.o): New target.
3775 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
3776 * configure: Rebuild.
3778 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
3780 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
3781 (opcode_bits, opcode_hash_table): New variables.
3782 (opcodes_initialized): Renamed from opcodes_sorted.
3783 (build_hash_table): New function.
3784 (is_delayed_branch): Use hash table.
3785 (print_insn): Renamed from print_insn_sparc, made static.
3786 Build and use hash table. If !sparc64, ignore sparc64 insns,
3787 and vice-versa if sparc64.
3788 (print_insn_sparc, print_insn_sparc64): New functions.
3789 (compare_opcodes): Move sparc64 opcodes to end.
3790 Print commutative insns with constant second.
3791 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
3793 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
3795 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
3796 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
3797 avoids printing a delay slot in a delay slot.
3798 * sh-opc.h (sh_table): Fully bracket last entry.
3800 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
3802 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
3804 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
3806 * configure.in: Get host_makefile_frag from ${srcdir}.
3808 * configure.in: Autoconfiscated. Check for string[s].h. Create
3809 config.h from config.in. Don't set up sysdep.h link.
3810 * sysdep.h: New file.
3811 * configure, config.in: New files, generated from configure.in.
3812 * Makefile.in: Updated to be processed autoconf-style.
3813 (distclean): Keep sysdep.h. Remove config.log and config.cache.
3814 (Makefile): Depend on config.status.
3815 (config.status): New rule.
3816 * configure.bat: Update Makefile substitutions.
3818 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
3820 * mips-opc.c (L1): Define.
3821 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
3822 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
3825 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
3827 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
3828 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
3829 have multiple add units but only a single logical unit.
3831 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
3832 shifted by 18, without any insertion or extraction function.
3833 (insert_cr, extract_cr): Remove.
3835 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3837 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
3840 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
3842 * mpw-config.in: Add sh and i386 configs, remove sparc config.
3843 * sh-opc.h: Add copyright.
3845 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
3847 * Makefile.in (crunch-m68k): Delete extra target accidentally
3848 checked in a while ago.
3850 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3852 * sh-opc.h (sh_table): Add SH3 support.
3854 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
3856 * sh-opc.h: Added bsrf and braf.
3858 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
3860 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
3861 bogus [ls]fm{ea,fd} patterns.
3863 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
3864 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
3865 initialize it from memory. Make function static.
3866 (print_insn_{big,little}_arm): New functions.
3867 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
3868 the correct endianness.
3870 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
3872 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
3875 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3877 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
3878 17th, so that it builds again using GCC as the compiler.
3880 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3882 * mips-dis.c (print_insn_little_mips): Cast return value from
3883 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
3884 expects an unsigned long, and that might be fewer words of
3885 argument storage (e.g., if bfd_vma is long long on a 32-bit
3887 (print_insn_big_mips): Likewise with bfd_getb32 value.
3888 (_print_insn_mips): Now static.
3890 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
3892 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
3893 gcc memory hog problem with initializer is fixed.
3895 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
3897 Merge in support for Mac MPW as a host.
3898 (Old change descriptions retained for informational value.)
3900 * mpw-config.in (archname): Compute from the config.
3901 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
3903 * mpw-config.in (target_arch): Compute from canonical target.
3904 (m68k, mips, powerpc, sparc): Add architectures.
3905 * mpw-make.in (disassemble.c.o): Add.
3906 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
3908 * mpw-config.in (BFD_MACHINES): Set to a default value.
3909 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
3911 * mpw-make.in (CSEARCH): Add extra-include to search path.
3913 * mpw-config.in (varargs.h): Don't create.
3914 (sysdep.h): Create using forward-include.
3915 * mpw-make.in (CSEARCH): Add include/mpw to search path.
3917 * mpw-config.in: New file, MPW version of configure.in.
3918 * mpw-make.in: New file, MPW version of Makefile.in.
3920 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3922 * alpha-dis.c (print_insn_alpha): Put empty statement after
3925 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
3927 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
3928 (low_sign_extend): Likewise.
3929 (get_field): Delete unused function.
3930 (set_field, deposit_14, deposit_21): Likewise.
3932 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3934 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
3937 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
3939 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
3941 * alpha-opc.h (OSF_ASMCODE): define
3942 print pal-code names as defined in App C of the
3943 Alpha Architecture Reference Manual
3945 * alpha-dis.c: cleaned up output
3946 print stylized code forms as defined in App A.4.3 of the
3947 Alpha Architecture Reference Manual
3949 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
3951 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
3953 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
3956 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3958 * m68k-dis.c (opcode): New function. Returns address of opcode
3959 table entry given index, even if the opcode table was split to
3960 work around gcc bugs.
3961 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
3963 (BREAK_UP_BIG_DECL): Make secondary array static and const.
3964 (reg_names): Now const.
3965 (print_insn_arg): Arrays cacheFieldName and names now const.
3966 (print_indexed): Array scales now const.
3968 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
3970 * ppc-opc.c: Sort recently added instructions by minor opcode
3971 number within major opcode number.
3973 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
3975 * hppa-dis.c: Include libhppa.h.
3977 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
3979 * mips-opc.c: Change dli to use M_DLI, and add dla.
3981 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3983 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
3985 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
3987 * mips-opc.c: Add r4650 mul instruction.
3989 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
3991 * mips-opc.c: Add uld and usd macros for unaligned double load and
3994 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3996 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
3997 mfdcr, mtdcr, icbt, iccci.
3999 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4001 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4002 signed char fields to shorts, more portable.
4004 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4006 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4007 char fields as signed chars, since they may have negative values.
4009 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4011 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4012 (mycroft@netbsd.org).
4014 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4016 From "Logg, Ed" <elogg@ea.com>:
4017 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4018 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4021 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4023 * ppc-opc.c: Changes based on patch from David Edelsohn
4024 <edelsohn@mhpcc.edu>.
4025 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4028 (insert_tbr): New static function.
4029 (extract_tbr): New static function.
4030 (XFXFXM_MASK, XFXM): Define.
4031 (XSPRBAT_MASK, XSPRG_MASK): Define.
4032 (powerpc_opcodes): Add instructions to access special registers by
4033 name. Add mtcr and mftbu.
4035 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4037 * mips-opc.c (P3): Define.
4038 (mips_opcodes): Add mad and madu.
4040 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4042 * configure.in: Add W65 support.
4043 * disassemble.c: Likewise.
4044 * w65-opc.h, w65-dis.c: New files.
4046 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4048 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4051 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4053 * mips-opc.c: Add dli as a synonym for li.
4055 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4057 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4058 print something for reserved opcode values, even if it won't
4061 * mips-dis.c (_print_insn_mips): When initializing, shift right
4062 and mask, to avoid sign extension problems on the Alpha.
4064 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4067 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4069 * sh-opc.h (mov.l gbr): Get direction right.
4070 * sh-dis.c (print_insn_shx): New function.
4071 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4072 print opcodes with right byte order.
4074 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4076 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4077 to avoid conflicts with getopt.
4079 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4081 * hppa-dis.c (print_insn_hppa): Read the instruction using
4082 bfd_getb32, so that it works on a little endian or 64 bit host.
4083 Remove unused local variable op.
4085 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4087 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4088 addu does not work correctly if -mips3.
4090 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4092 * a29k-dis.c (print_special): Add special register names defined
4093 on 29030, 29040 and 29050.
4094 (print_insn): Handle new operand type 'I'.
4096 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4098 * Makefile.in (INSTALL): Use top level install.sh script.
4100 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4102 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4103 that it works on a little endian host.
4105 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4107 * configure.in: Use ${config_shell} when running config.bfd.
4109 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4111 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4113 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4115 * a29k-dis.c (print_insn): Print the opcode.
4117 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4119 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4121 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4123 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4125 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4127 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4128 which store a value into memory.
4130 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4132 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4133 * arm-dis.c, arm-opc.h: New files.
4135 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4137 * Makefile.in (ns32k-dis.o): Add dependency.
4138 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4139 string, not as array of chars.
4141 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4143 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4145 * sparc-opc.c: Added sparclite extended FP operations, and
4146 versions of v9 impdep* instructions permitting specification of
4149 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4151 * i960-dis.c (reg_names): Now const.
4152 (struct sparse_tabent): New type, copied from array type in mem
4154 (ctrl): Local static array ctrl_tab now const.
4155 (cobr): Local static array cobr_tab now const.
4156 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4157 static variable mem_tab no longer explicitly initialized. Changed
4158 mem_init to const array of struct sparse_tabent.
4159 (reg): Local static variable reg_tab no longer explicitly
4160 initialized. Changed reg_init to const array of struct
4162 (ea): Local static array scale_tab now const.
4164 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4167 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4169 * configure.bat: the disassember needs to be enabled for
4170 "objdump -d" to work in djgpp.
4172 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4174 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4175 (invalid_float): Enabled general version, doesn't require running
4176 on ns32k host. Changed to take char* argument, and test for
4177 explicitly specified sizes, instead of using sizeof() on host CPU
4179 (INVALID_FLOAT): Cast first argument.
4180 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4181 list_P032, list_M032): Now const.
4182 (optlist, list_search): Made appropriate arguments now point to
4184 (print_insn_arg): Changed static array of one-character-string
4185 pointers into a static const array of characters; fixed sprintf
4186 statement accordingly.
4188 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4190 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4191 from distribution. A ns32k-dis.c from a previous distribution has
4192 been brought up to date and supports the new interface.
4194 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4196 * configure.in: add bfd_ns32k_arch target support.
4198 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4199 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4201 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4203 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4206 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4208 * h8300-dis.c, mips-dis.c: Don't use true and false.
4210 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4212 * configure.in: Change --with-targets to --enable-targets.
4214 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4216 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4217 opcodes to the first instruction with that opcode, to speed
4218 disassembly of large files. From ralphc@pyramid.com (Ralph
4221 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4223 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4225 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4227 * configure.bat: update to latest makefile.in
4229 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4231 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4232 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4233 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4234 slot insn is in a delay slot.
4235 * z8k-opc.h: (resflg): Fix patterns.
4236 * h8500-opc.h Fix CR insn patterns.
4238 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4240 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4241 "cmpl" before POWER versions, so that gas -many uses them.
4243 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4245 * disassemble.c: New file.
4246 * Makefile.in (OFILES): Add disassemble.o.
4247 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4248 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4249 binutils/configure.in.
4251 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4252 opcode being examined.
4254 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4256 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4257 (insert_ral, insert_ram, insert_ras): New functions.
4258 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4259 RAS for store with update.
4261 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4263 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4264 (edelsohn@npac.syr.edu).
4266 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4268 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4271 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4273 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4275 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4277 * ppc-opc.c (powerpc_operands): The signedp field has been
4278 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4279 instead. Add new operand SISIGNOPT.
4280 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4281 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4282 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4285 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4287 * i386-dis.c (struct private): Renamed to dis_private. `private'
4288 is a reserved word for dynix cc.
4290 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4292 * configure.in: Change error message to refer to bfd/config.bfd
4293 rather than bfd/configure.in.
4295 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4297 * ppc-opc.c: Define POWER2 as short alias flag.
4298 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4301 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4303 * i960-dis.c (print_insn_i960): Don't read a second word for
4304 opcodes 0, 1, 2 and 3.
4306 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4308 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4310 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4312 * m68881-ext.c: Removed; no longer used.
4313 * Makefile.in: Changed accordingly.
4315 * m68k-dis.c (ext_format_68881): Don't declare.
4316 (print_insn_m68k): If an instruction uses place 'i', it uses at
4317 least four fixed bytes.
4318 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4319 extended float, convert to double using floatformat_to_double, not
4320 ieee_extended_to_double, and fetch the data before converting it.
4322 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4324 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4325 davidj@ICSI.Berkeley.EDU (David Johnson).
4327 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4329 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4330 PowerPC uses bdnz[l][a].
4332 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4334 * dis-buf.c, i386-dis.c: Include sysdep.h.
4336 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4338 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4340 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4341 by Motorola PowerPC 601 with PPC_OPCODE_601.
4342 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4343 Disassemble Motorola PowerPC 601 instructions as well as normal
4344 PowerPC instructions.
4346 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4348 * i960-dis.c (reg, mem): Just use a static array instead of
4351 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4353 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4354 condition name index if this is for a negated condition.
4356 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4357 Floating point format for 'H' operand is backwards from normal
4358 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4359 operands (fmpyadd and fmpysub), handle bizarre register
4360 translation correctly for single precision format.
4362 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4363 or 'I' operands if the next format specifier is 'M' (fcmp
4364 condition completer).
4366 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4368 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4369 single number giving a bitmask for the MB and ME fields of an M
4370 form instruction. Change NB to accept 32, and turn it into 0;
4371 also turn 0 into 32 when disassembling. Seperated SH from NB.
4372 (insert_mbe, extract_mbe): New functions.
4373 (insert_nb, extract_nb): New functions.
4374 (SC_MASK): Mask out SA and LK bits.
4375 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4376 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4377 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4378 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4379 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4380 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4381 (powerpc_macros): Define table of macro definitions.
4382 (powerpc_num_macros): Define.
4384 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4385 if PPC_OPERAND_NEXT is set.
4387 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4389 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4390 char. Retrieve contents using bfd_getl32 instead of shifting.
4392 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4394 * ppc-opc.c: New file. Opcode table for PowerPC, including
4395 opcodes for POWER (RS/6000).
4396 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4397 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4398 (CFILES): Add ppc-dis.c.
4399 (ppc-dis.o, ppc-opc.o): New targets.
4400 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4402 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4404 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4405 No space before 'u', 'f', or 'N'.
4407 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4409 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4410 farther than we should.
4412 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4414 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4416 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4418 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4420 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4421 needs it, to prevent reading past the end of a section.
4423 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4425 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4426 Removed t,A case for la; always use t,A(b) case.
4428 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4430 From Ted Lemen <mellon@pepper.ncd.com>
4431 * mips-dis.c (print_insn_arg): Handle 'k'.
4432 * mips-opc.c: Make cache use k, not t.
4434 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4436 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4437 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4438 FLOAT_FORMAT_CODE to put out floating point register names.
4440 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4442 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4444 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4446 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4448 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4450 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4451 larger than 32. Moved dsxx32 variants first for disassembler.
4453 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4455 * z8kgen.c, z8k-opc.h: Add full lda information.
4457 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4459 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4460 movb instructions. Any necessary space will be emitted by
4461 the code to handle nullification completers.
4463 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4465 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4467 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4469 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4470 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4472 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4474 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4476 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4478 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4479 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4481 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4483 * m88k-dis.c (m88kdis): comment change. Remove space after
4485 (printop): handle new arg types DEC and XREG for m88110.
4487 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4489 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4490 type for absolute branch addresses. Delete special
4491 "ble" and "be" code in 'W' operand code.
4493 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4495 * mips-opc.c: Set hazard information correctly for branch
4496 likely instructions.
4498 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4500 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4501 info->fprintf_func for printing and info->print_address_func for
4504 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4506 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4508 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4510 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4511 Corrected second case of "b" for disassembler.
4513 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4515 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4516 to BFD swapping routines to correspond to BFD name changes.
4518 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4520 * mips-opc.c: Change div machine instruction to be z,s,t rather
4521 than s,t. Change div macro to be d,v,t rather than d,s,t.
4522 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4523 rem and remu which generates only the corresponding div
4524 instruction. This is for compatibility with the MIPS assembler,
4525 which only generates the simple machine instruction when an
4526 explicit destination of $0 is used.
4527 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4529 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4531 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4532 WR_31 hazard for bal, bgezal, bltzal.
4534 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4536 * hppa-dis.c (print_insn_hppa): Use print function
4537 from within the disassemble_info, not fprintf_filtered.
4539 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4541 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4542 Law, law@cs.utah.edu.)
4544 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4546 * mips-opc.c ("absu"): Removed.
4549 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4551 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4552 Changed hazard information to distinguish between memory load
4553 delays and coprocessor load delays.
4555 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4557 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4559 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4561 * configure.in: Don't pass cpu to config.bfd.
4563 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4565 * m88k-dis.c (m88kdis): Make class unsigned.
4567 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4569 * alpha-dis.c (print_insn_alpha): One branch format case was
4570 missing the instruction name.
4572 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4574 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4575 Add the arch-specific auxiliary files.
4576 (OFILES): Remove the arch-specific auxiliary files
4577 and use BFD_MACHINES instead of DIS_LIBS.
4578 * configure.in: Set BFD_MACHINES based on --with-targets option.
4580 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4582 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4585 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4587 * sparc-opc.c: Change CONST to const to deal with gcc
4588 -Dconst=__const -traditional.
4590 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4592 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4593 coprocessor instructions out of #if 0, and made them use new
4596 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4598 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4600 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4602 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4603 instruction, for use by the disassembler.
4605 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4606 hand-coded sign extensions that depended on 32-bit host ints.
4607 FIXME, we still depend on big-endian host bitfield ordering.
4608 (sparc_print_insn): Set the insn_info_valid field, and the
4609 other fields that describe the instruction being printed.
4611 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4613 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4614 `jmp' instead of just one of them.
4616 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4618 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4619 (fput_fp_reg_r): Renamed from fput_reg_r.
4620 (fput_fp_reg): New function.
4621 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4623 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4625 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4627 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4629 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4631 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4632 don't output a space.
4634 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4636 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4638 * mips-opc.c: New file, containing opcode table from
4639 ../include/opcode/mips.h.
4640 * Makefile.in: Add it.
4642 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4644 * m88k-dis.c: New file, moved in from gdb and changed to use the
4645 new dis-asm.h disassembler interface.
4646 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4647 (m88k-dis.o): New target.
4649 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4651 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4652 argument string const char * to correspond to opcode/mips.h.
4654 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4656 * mips-dis.c: Updated to account for name changes in new version
4658 * Makefile.in: Added header file dependencies.
4660 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4662 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4664 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4666 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4667 extend, rather than shifts.
4669 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4671 * Makefile.in: Undo 15 June change.
4673 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4675 * m68k-dis.c (print_insn_arg): Change return value to byte count
4677 * m68k-dis.c: Re-write to detect invalid operands before
4678 printing anything, so we can handle this the same way we
4679 handle invalid opcodes.
4681 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4683 * sh-dis.c, sh-opc.h: Understand some more opcodes.
4685 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
4687 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4690 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4692 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4694 * configure.in: Do make sysdep.h link.
4695 * Makefile.in: Search ../include. Don't search ../bfd.
4697 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
4699 Changes from Jeff Law, law@cs.utah.edu:
4700 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
4701 Do not print a space before the completers specified by
4704 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
4706 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
4707 defined, since gdb has been fixed.
4709 Changes from Jeff Law, law@cs.utah.edu:
4710 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
4711 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
4712 be a *disassemble_info, not a *FILE.
4713 * hppa-dis.c: Support 'd', '!', and 'a'.
4714 * hppa-dis.c: Support 's' to extract a 2 bit space register.
4715 * hppa-dis.c: Delete cases which are no longer needed.
4717 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
4719 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
4721 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4723 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
4726 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
4728 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
4729 * configure.in: No longer need to configure to get sysdep.h.
4731 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
4733 * Patches from Jeffrey Law <law@cs.utah.edu>.
4734 * hppa-dis.c: Support 'I', 'J', and 'K' in output
4735 templates for 1.1 FP computational instructions.
4737 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4739 * h8500-dis.c (print_insn_h8500): Address argument is type
4741 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
4744 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
4745 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
4747 * sparc-dis.c (compare_opcodes): Move static declaration to
4750 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4752 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
4753 instruction, remove unimp hack from 'l' argument.
4755 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
4757 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
4760 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
4762 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
4763 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
4766 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4768 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
4769 arrays of string pointers to 2-d arrays of chars, to save
4772 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
4774 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
4775 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
4777 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4779 * hppa-dis.c: New file from Utah, adapted to new disassembler
4781 * Makefile.in: Include it.
4783 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4785 * sh-dis.c, sh-opc.h: New files.
4787 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4789 * alpha-dis.c, alpha-opc.h: New files.
4791 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4793 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
4796 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
4798 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
4800 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
4802 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
4805 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
4807 * sparc-dis.c: Use fprintf_func a few places where I forgot,
4808 and double percent signs a few places.
4810 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
4812 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
4813 Use info->print_address_func not print_address.
4815 * dis-buf.c (generic_print_address): New function.
4817 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4819 * Makefile.in: Add sparc-dis.c.
4820 sparc-dis.c: New file, merges binutils and gdb versions as follows:
4822 Add `add' instruction to the set that get checked
4823 for a preceding `sethi' in order to print an absolute address.
4824 * (print_insn): Disassembly prefers real instructions.
4825 (is_delayed_branch): Speed up.
4826 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
4827 Still missing some float ops, and needs testing.
4828 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
4829 F_ALIAS. Use printf, not fprintf, when not passing a file
4831 (compare_opcodes): Check that identical instructions have
4832 identical opcodes, complain otherwise.
4835 * Include reg_names.
4837 Use dis-asm.h/read_memory_func interface.
4839 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
4841 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
4842 deliberately return non-zero to setjmp from longjmp. Otherwise
4843 this code fails to compile.
4845 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
4847 * m68k-dis.c: Fix prototype for fetch_arg().
4849 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4851 * dis-buf.c: New file, for new read_memory_func interface.
4852 Makefile.in (OFILES): Include it.
4853 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
4854 Use new read_memory_func interface.
4856 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4858 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
4859 * h8500-opc.h: Fix couple of opcodes.
4861 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
4863 * Makefile.in: add dvi & installcheck targets
4865 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
4867 * Makefile.in: Update for h8500-dis.c.
4869 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4871 * h8500-dis.c, h8500-opc.h: New files
4873 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
4875 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
4876 ../include/dis-asm.h.
4877 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
4878 and ../gdb/m68k-pinsn.c).
4879 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
4880 and ../gdb/i386-pinsn.c).
4881 * m68881-ext.c: New file. Moved definition of
4882 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
4883 * Makefile.in: Adjust for new files.
4884 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
4885 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
4886 can be dis-assembled.
4888 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4890 * mips-dis.c (print_insn_arg): Now returns void.
4892 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
4894 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
4895 files that use the macros.
4897 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4899 * mips-dis.c: New file, from gdb/mips-pinsn.c.
4900 * Makefile.in (DIS_LIBS): Added mips-dis.o.
4901 (CFILES): Added mips-dis.c.
4903 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4905 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
4906 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
4908 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
4910 * Makefile.in: Improve *clean rules.
4911 * configure.in: Allow a default host.
4913 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4915 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
4916 files include other sysdep files
4918 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4920 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
4922 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
4924 * configure.in: For host support, use ../bfd/configure.host
4925 so it stays in sync with the ../bfd/hosts database.
4927 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4929 * configure.in: use cpu-vendor-os triple instead of nested cases
4931 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
4933 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
4934 *always* the wrong one.
4936 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4938 * z8kgen.c: added copyright info
4940 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4942 * z8k-dis.c (unparse_instr): prettier tabs
4943 * z8kgen.c -> z8k-opc.h: bug fixes in tables
4945 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
4947 * configure.in: Add ncr* configuration.
4948 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
4949 picayune ANSI compilers happy.
4951 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
4953 * configure.in (i386): Make i386 and i486 synonymous for now.
4954 * configure.in (i[34]86-*-sysv4): Add my_host definition.
4956 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
4958 * Makefile.in (install): Fix typo.
4960 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
4962 * Makefile.in (make): Remove obsolete crud.
4963 (sparc-opc.o): Avoid Sun Make VPATH bug.
4965 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
4967 * Makefile.in: since there are no SUBDIRS, remove rule and
4968 references of subdir_do.
4970 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
4972 * Makefile.in (install): Get the library name right here too.
4973 Don't install bfd.h, since it's unrelated to this library. No
4974 subdirs to recurse into, either.
4975 (CFILES): The source file has a .c suffix, not .o.
4977 * sparc-opc.c: New file, moved from BFD.
4978 * Makefile.in (OFILES): Build it.
4980 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
4982 * z8k-dis.c: fixed forward refferences of some declarations.
4984 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
4986 * Makefile.in: get the name of the library right
4988 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4990 * z8k-dis.c: knows how to disassemble z8k stuff
4991 * z8k-opc.h: new file full of z8000 opcodes
4995 version-control: never