2 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
4 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
5 New macros for building vector instruction opcodes.
6 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
7 FMT_LI, which were unused. The field is now a flags field.
8 Remove some opcodes that are possible, but illegal, such
9 as long immediate instructions with doubles for immediate
10 values. Add "vadd" and "vld" instructions.
12 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
14 * tic80-opc.c (tic80_operands): Reorder some table entries to make
15 the order more logical. Move the shift alias instructions ("rotl",
16 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
17 interspersed with the regular sr.x and sl.x instructions. Add
18 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
19 "sub", "subu", "swcr", and "trap".
21 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
23 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
24 (OFF_SL_PC): Renamed from OFF_SL.
25 (OFF_SS_BR): New operand type for base relative operand.
26 (OFF_SL_BR): New operand type for base relative operand.
27 (REG_BASE): New operand type for base register operand.
28 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
29 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
30 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
32 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
33 10 char field, padded with spaces on rhs, rather than a string
34 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
35 than old TIC80_OPERAND_RELATIVE. Add support for new
36 TIC80_OPERAND_BASEREL flag bit.
38 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
40 * tic80-dis.c (print_insn_tic80): Print floating point operands
42 * tic80-opc.c (SPFI): Add single precision floating point
43 immediate operand type.
44 (ROTATE): Add rotate operand type for shifts.
45 (ENDMASK): Add for shifts.
46 (n): Macro for the 'n' bit.
47 (i): Macro for the 'i' bit.
48 (PD): Macro for the 'PD' field.
49 (P2): Macro for the 'P2' field.
50 (P1): Macro for the 'P1' field.
51 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
55 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
57 * mn10200-dis.c (disassemble): Mask off unwanted bits after
58 adding in current address for pc-relative operands.
61 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
63 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
64 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
65 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
66 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
67 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
68 REG_BASE_M_SI, REG_BASE_M_LI respectively.
69 (REG_SCALED, LSI_SCALED): New operand types.
70 (E): New macro for 'E' bit at bit 27.
71 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
72 opcodes, including the various size flavors (b,h,w,d) for
73 the direct load and store instructions.
75 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
77 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
79 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
80 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
81 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
82 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
83 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
84 masks with "MASK_* & ~M_*" to get the M bit reset.
85 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
87 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
89 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
90 correctly. Add support for printing TIC80_OPERAND_BITNUM and
91 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
93 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
94 CC, SICR, and LICR table entries.
95 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
96 "bcnd", and "brcr" opcodes.
99 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
101 * ppc-opc.c (powerpc_operands): Make comment match the
102 actual fields (no shift field).
103 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
105 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
106 partial implementation, work in progress.
107 * tic80-opc.c (tic80_operands): Begin construction operands table.
108 (tic80_opcodes): Continue populating opcodes table and start
109 filling in the operand indices.
110 (tic80_num_opcodes): Add this.
113 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
115 * m68k-opc.c: Add #B case for moveq.
117 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
119 * mn10300-dis.c (disassemble): Make sure all variables are initialized
120 before they are used.
123 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
125 * v850-opc.c (v850_opcodes): Put curly-braces around operands
126 for "breakpoint" instruction.
129 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
131 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
132 (dep): Use ALL_CFLAGS rather than CFLAGS.
135 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
137 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
141 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
143 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
145 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
148 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
150 * mips16-opc.c: Add "abs".
153 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
155 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
156 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
157 (disassembler): Add bfd_arch_tic80 support to set disassemble
159 * tic80-dis.c (print_insn_tic80): Add stub.
161 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
163 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
164 * configure: Regenerate with autoconf.
165 * tic80-dis.c: Add file.
166 * tic80-opc.c: Add file.
170 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
172 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
175 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
177 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
178 (mn10200_opcodes): Use it for some logicals and btst insns.
179 Add "break" and "trap" instructions.
181 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
183 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
185 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
187 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
188 relative load or add now depends upon whether the instruction is
191 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
193 * mn10200-dis.c: Finish writing disassembler.
194 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
195 Fix mask for "jmp (an)".
197 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
198 handle endianness issues for mn10300.
200 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
202 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
204 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
205 instruction. Fix opcode field for "movb (imm24),dn".
207 * mn10200-opc.c (mn10200_operands): Fix insertion position
210 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
212 * mn10200-opc.c: Create mn10200 opcode table.
213 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
214 but moving along nicely.
216 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
218 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
220 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
222 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
223 specifiers for fmovem* instructions.
225 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
227 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
229 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
231 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
234 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
236 * mn10300-opc.c: Add some comments explaining the various
239 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
241 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
243 * m68k-dis.c (print_insn_arg): Handle new < and > operand
246 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
247 operand specifiers in fmovm* instructions.
249 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
251 * ppc-opc.c (insert_li): Give an error if the offset has the two
252 least significant bits set.
254 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
256 * mips-dis.c (print_insn_mips16): Separate the instruction from
257 the arguments with a tab, not a space.
259 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
261 * mn10300-dis.c (disasemble): Finish conversion to '$' as
264 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
267 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
269 * configure: Rebuild with autoconf 2.12.
271 Add support for mips16 (16 bit MIPS implementation):
272 * mips16-opc.c: New file.
273 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
274 (mips16_reg_names): New static array.
275 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
276 after seeing a 16 bit symbol.
277 (print_insn_little_mips): Likewise.
278 (print_insn_mips16): New static function.
279 (print_mips16_insn_arg): New static function.
280 * mips-opc.c: Add jalx instruction.
281 * Makefile.in (mips16-opc.o): New target.
282 * configure.in: Use mips16-opc.o for bfd_mips_arch.
283 * configure: Rebuild.
285 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
287 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
288 operand specifiers in *save, *restore and movem* instructions.
290 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
293 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
294 register operands for immediate arithmetic, not, neg, negx, and
295 set according to condition instructions.
297 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
298 specifier of the effective-address operand in immediate forms of
299 arithmetic instructions. The specifier for the immediate operand
300 notes how and where the constant will be stored.
302 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
304 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
307 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
310 * mn10300-dis.c (disassemble): Prefix registers with '%'.
312 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
314 * mn10300-dis.c (disassemble): Handle register lists.
316 * mn10300-opc.c: Fix handling of register list operand for
317 "call", "ret", and "rets" instructions.
319 * mn10300-dis.c (disassemble): Print PC-relative and memory
320 addresses symbolically if possible.
321 * mn10300-opc.c: Distinguish between absolute memory addresses,
322 pc-relative offsets & random immediates.
324 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
326 (disassemble): Handle SPLIT and EXTENDED operands.
328 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
330 * mn10300-dis.c: Rough cut at printing some operands.
332 * mn10300-dis.c: Start working on disassembler support.
333 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
335 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
337 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
340 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
342 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
345 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
347 * mn10300-opc.c (mn10300_opcodes): Demand parens around
348 register argument is calls and jmp instructions.
350 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
352 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
353 getx operand. Fix opcode for mulqu imm,dn.
355 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
357 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
358 in MN10300_OPERAND_SPLIT operands for how many bits
359 appear in the basic insn word. Add IMM32_HIGH24,
360 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
361 (mn10300_opcodes): Use new operands as needed.
363 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
364 for bset, bclr, btst instructions.
365 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
367 * mn10300-opc.c (mn10300_operands): Remove many redundant
368 operands. Update opcode table as appropriate.
369 (IMM32): Add MN10300_OPERAND_SPLIT flag.
370 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
372 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
374 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
375 operands (for indexed load/stores). Fix bitpos for DI
376 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
377 few instructions that insert immediates/displacements in the
378 middle of the instruction. Add IMM8E for 8 bit immediate in
379 the extended part of an instruction.
380 (mn10300_operands): Use new opcodes as appropriate.
383 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
385 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
386 sequential so the assembler never parallelizes it with
390 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
392 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
393 a data/address register that appears in register field 0
394 and register field 1.
395 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
397 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
399 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
400 standard disassembly.
402 * alpha-opc.c (alpha_operands): Rearrange flags slot.
403 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
404 Recategorize PALcode instructions.
407 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
409 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
412 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
414 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
415 there are no operand types.
418 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
420 * v850-opc.c (D9_RELAX): Renamed from D9, all references
422 (v850_operands): Make sure D22 immediately follows D9_RELAX.
425 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
427 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
430 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
432 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
433 and sst.w instructions.
435 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
439 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
441 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
444 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
446 * ppc-opc.c (PPCPWR2): Define.
447 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
450 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
452 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
453 field for movhu instruction.
456 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
457 cast value to "long" not "signed long" to keep hpux10
461 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
463 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
466 * mn10300-opc.c (FMT*): Remove definitions.
468 * mn10300-opc.c (mn10300_opcodes): Fix destination register
469 for shift-by-register opcodes.
471 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
472 into [AD][MN][01] for encoding the position of the register
475 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
477 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
478 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
480 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
482 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
483 Fix various typos. Add "PAREN" operand.
485 (mn10300_opcodes): Surround all memory addresses with "PAREN"
486 operands. Fix several typos.
488 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
491 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
493 * mn10300-opc.c (FMT_XX): Renumber starting at one.
494 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
496 (mn10300_opcodes): Break opcode format out into its own field.
497 Update many operand fields to deal with signed vs unsigned
498 issues. Fix one or two typos in the "mov" instruction
499 opcode, mask and/or operand fields.
501 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
503 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
506 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
508 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
509 all opcodes. Very rough cut at operands for all opcodes.
511 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
514 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
516 * mn10200-opc.c, mn10300-opc.c: New files.
517 * mn10200-dis.c, mn10300-dis.c: New files.
518 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
519 * disassemble.c: Break mn10x00 support into 10200 and 10300
521 * configure.in: Likewise.
522 * configure: Rebuilt.
524 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
526 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
528 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
530 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
532 * disassemble (ARCH_mn10x00): Define.
533 (disassembler): Handle bfd_arch_mn10x00.
534 * configure.in: Recognize bfd_mn10x00_arch.
535 * configure: Rebuilt.
537 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
539 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
540 accordingly. Don't declare functions using op_rtn.
543 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
545 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
546 params to be more standard.
547 * (disassemble): Print absolute addresses and symbolic names for
548 branch and jump targets.
549 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
551 * (v850_opcodes): Add breakpoint insn.
554 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
556 * m68k-opc.c: Move the fmovemx data register cases before the
557 other cases, so that they get recognized before the data register
558 does gets treated as a degenerate register list.
560 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
562 * mips-opc.c: Add a case for "div" and "divu" with two registers
563 and a destination of $0.
565 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
567 * mips-dis.c (print_insn_arg): Add prototype.
568 (_print_insn_mips): Ditto.
570 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
572 * mips-dis.c (print_insn_arg): Print condition code registers as
575 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
577 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
580 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
582 * v850-dis.c (disassemble): Make static. Provide prototype.
584 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
586 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
589 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
591 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
592 ']' characters into the output stream.
593 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
594 Add "memop" field to all opcodes (for the disassembler).
595 Reorder opcodes so that "nop" comes before "mov" and "jr"
598 * v850-dis.c (print_insn_v850): Fix typo in last change.
600 * v850-dis.c (print_insn_v850): Properly handle disassembling
601 a two byte insn at the end of a memory region when the memory
602 region's size is only two byte aligned.
604 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
606 * v850-dis.c (v850_reg_names): Define.
607 (v850_sreg_names, v850_cc_names): Likewise.
608 (disassemble): Very rough cut at printing operands (unformatted).
610 * v850-opc.c (BOP_MASK): Fix.
611 (v850_opcodes): Fix mask for jarl and jr.
613 * v850-dis.c: New file. Skeleton for disassembler support.
614 * Makefile.in Remove v850 references, they're not needed here
615 and they weren't being sanitized away.
616 * configure.in: Add v850-dis.o when building v850 toolchains.
617 * configure: Rebuilt.
618 * disassemble.c (disassembler): Call v850 disassembler.
620 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
621 (insert_d8_6, extract_d8_6): New functions.
622 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
623 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
625 (IF4A, IF4B): Use "D7" instead of "D7S".
626 (IF4C, IF4D): Use "D8_7" instead of "D8".
627 (IF4E, IF4F): New. Use "D8_6".
628 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
629 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
631 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
632 (v850_operands): Change D16 to D16_15, use special insert/extract
633 routines. New new D16 that uses the generic insert/extract code.
634 (IF7A, IF7B): Use D16_15.
635 (IF7C, IF7D): New. Use D16.
636 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
638 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
639 message. Issue an error if the branch offset is odd.
641 * v850-opc.c: Add notes about needing special insert/extract
642 for all the load/store insns, except "ld.b" and "st.b".
644 * v850-opc.c (insert_d22, extract_d22): New functions.
645 (v850_operands): Use insert_d22 and extract_d22 for
647 (insert_d9): Fix range check.
649 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
651 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
652 and set bits field to D9 and D22 operands.
654 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
656 * v850-opc.c (v850_operands): Define SR2 operand.
657 (v850_opcodes): "ldsr" uses R1,SR2.
659 * v850-opc.c (v850_opcodes): Fix opcode specs for
660 sld.w, sst.b, sst.h, sst.w, and nop.
662 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
664 * v850-opc.c (v850_opcodes): Add null opcode to mark the
665 end of the opcode table.
669 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
671 * d10v-opc.c (pre_defined_registers): Added register pairs,
672 "r0-r1", "r2-r3", etc.
676 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
678 * v850-opc.c (v850_operands): Make I16 be a signed operand.
679 Create I16U for an unsigned 16bit mmediate operand.
680 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
682 * v850-opc.c (v850_operands): Define EP operand.
683 (IF4A, IF4B, IF4C, IF4D): Use EP.
685 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
686 with immediate operand, "movhi". Tweak "ldsr".
688 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
689 correct. Get sld.[bhw] and sst.[bhw] closer.
691 * v850-opc.c (v850_operands): "not" is a two byte insn
693 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
695 * v850-opc.c (v850_operands): D16 inserts at offset 16!
697 * v850-opc.c (two): Get order of words correct.
699 * v850-opc.c (v850_operands): I16 inserts at offset 16!
701 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
702 register source and destination operands.
703 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
705 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
706 same thinko in "trap" opcode.
708 * v850-opc.c (v850_opcodes): Add initializer for size field
711 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
712 Add D8 for 8-bit unsigned field in short load/store insns.
713 (IF4A, IF4D): These both need two registers.
714 (IF4C, IF4D): Define. Use 8-bit unsigned field.
715 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
716 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
717 for "ldsr" and "stsr".
718 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
721 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
722 short store word (sst.w).
724 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
726 * v850-opc.c (v850_operands): Added insert and extract fields,
727 pointers to functions that handle unusual operand encodings.
729 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
731 * v850-opc.c (v850_opcodes): Enable "trap".
733 * v850-opc.c (v850_opcodes): Fix order of displacement
734 and register for "set1", "clr1", "not1", and "tst1".
736 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
738 * v850-opc.c (v850_operands): Add "B3" support.
739 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
742 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
744 * v850-opc.c: Close unterminated comment.
746 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
748 * v850-opc.c (v850_operands): Add flags field.
749 (v850_opcodes): add move opcodes.
751 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
753 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
754 * configure: (bfd_v850v_arch) Add new case.
755 * configure.in: (bfd_v850_arch) Add new case.
756 * v850-opc.c: New file.
759 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
761 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
764 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
766 * d10v-opc.c: Add additional information to the opcode
767 table to help determinine which instructions can be done
771 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
773 * mpw-make.sed: Update editing of include pathnames to be
776 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
778 * arm-opc.h: Added "bx" instruction definition.
780 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
782 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
785 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
787 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
789 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
791 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
794 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
796 * makefile.vms: Update for alpha-opc changes.
798 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
800 * i386-dis.c (print_insn_i386): Actually return the correct value.
801 (ONE, OP_ONE): #ifdef out; not used.
804 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
806 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
807 Changed subi operand type to treat 0 as 16.
810 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
812 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
815 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
817 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
818 memory transfer instructions. Add new format string entries %h and %s.
819 * arm-dis.c: (print_insn_arm): Provide decoding of the new
823 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
825 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
826 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
829 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
831 * alpha-dis.c (print_insn_alpha_osf): Remove.
832 (print_insn_alpha_vms): Remove.
833 (print_insn_alpha): Make globally visible. Chose the register
834 names based on info->flavour.
835 * disassemble.c: Always return print_insn_alpha for the alpha.
838 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
840 * d10v-dis.c (dis_long): Handle unknown opcodes.
842 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
844 * d10v-opc.c: Changes to support signed and unsigned numbers.
845 All instructions with the same name that have long and short forms
846 now end in ".l" or ".s". Divs added.
847 * d10v-dis.c: Changes to support signed and unsigned numbers.
849 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
851 * d10v-dis.c: Change all functions to use info->print_address_func.
854 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
856 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
857 move ccr/sr insns more strict so that the disassembler only
858 selects them when the addressing mode is data register.
861 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
862 * d10v-opc.c (pre_defined_registers): Declare.
863 * d10v-dis.c (print_operand): Now uses pre_defined_registers
864 to pick a better name for the registers.
867 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
869 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
870 operands for fexpand and fpmerge. From Christian Kuehnke
871 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
873 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
875 * alpha-dis.c (print_insn_alpha): No longer the user-visible
876 print routine. Take new regnames and cpumask arguments.
877 Kill the environment variable nonsense.
878 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
879 (print_insn_alpha_vms): New function. Do VMS style regnames.
880 * disassemble.c (disassembler): Test bfd flavour to pick
881 between OSF and VMS routines. Default to OSF.
883 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
885 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
886 * configure: Rebuild.
887 * Makefile.in (install): Use @INSTALL_SHLIB@.
890 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
892 * configure: (bfd_d10v_arch) Add new case.
893 * configure.in: (bfd_d10v_arch) Add new case.
894 * d10v-dis.c: New file.
895 * d10v-opc.c: New file.
896 * disassemble.c (disassembler) Add entry for d10v.
899 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
901 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
902 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
904 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
906 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
907 distinguish between variants of the instruction set.
908 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
909 distinguish between variants of the instruction set.
911 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
913 * i386-dis.c (print_insn_i8086): New routine to disassemble using
914 the 8086 instruction set.
915 * i386-dis.c: General cleanups. Make most things static. Add
916 prototypes. Get rid of static variables aflags and dflags. Pass
917 them as args (to almost everything).
919 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
921 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
923 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
925 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
926 if the next arg is marked with SRC_IN_DST. Gross.
928 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
929 we're looking for and find EXR.
931 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
932 if we're looking for KBIT and we don't find it.
934 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
937 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
938 3bit immediate operands.
940 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
942 * Released binutils 2.7.
944 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
945 <kkaempf@progis.ac-net.de>.
947 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
949 * alpha-opc.c: Correct second case of "mov" to use OPRL.
951 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
953 * sparc-dis.c (print_insn_sparclite): New routine to print
954 sparclite instructions.
956 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
958 * m68k-opc.c (m68k_opcodes): Add coldfire support.
960 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
962 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
963 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
964 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
966 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
968 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
969 Use autoconf-set values.
970 (docdir, oldincludedir): Removed.
971 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
973 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
975 * alpha-opc.c: New file.
976 * alpha-opc.h: Remove.
977 * alpha-dis.c: Complete rewrite to use new opcode table.
978 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
979 * configure: Rebuild with autoconf 2.10.
980 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
981 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
983 (alpha-opc.o): New target.
985 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
987 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
988 Set imm_added_to_rs1 even if the source and destination register
991 * sparc-opc.c: Add some two operand forms of the wr instruction.
993 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
995 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
998 * disassemble.c (disassembler): Handle H8/S.
999 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
1001 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
1003 * sparc-opc.c: Add beq/teq as aliases for be/te.
1005 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
1006 <sergei@msil.sps.mot.com>.
1008 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
1010 * makefile.vms: New file.
1012 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
1014 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
1016 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
1019 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
1021 * i386-dis.c (OP_OFF): Call append_prefix.
1023 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1025 * ppc-opc.c (instruction encoding macros): Add explicit casts to
1026 unsigned long to silence a warning from the Solaris PowerPC
1029 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
1031 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
1033 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
1035 * sparc-dis.c (X_IMM,X_SIMM): New macros.
1037 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
1038 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
1039 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
1040 cpush, cpusha, cpull sparclet insns.
1042 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
1044 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
1046 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
1048 * sparc-opc.c: Set F_FBR on floating point branch instructions.
1049 Set F_FLOAT on other floating point instructions.
1051 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1053 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
1055 (powerpc_opcodes): Add 860/821 specific SPRs.
1057 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
1059 * configure.in: Permit --enable-shared to specify a list of
1060 directories. Set and substitute BFD_PICLIST.
1061 * configure: Rebuild.
1062 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
1063 uses. Set to @BFD_PICLIST@.
1065 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
1067 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
1068 not "abs", which may be needed for the absolute in something
1069 like btst #0,@10:8. Print L_3 immediates separately from other
1070 immediates. Change ABSMOV reference to ABS8MEM.
1072 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
1074 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
1075 (current_arch_mask): New static global.
1076 (compute_arch_mask): New static function.
1077 (print_insn_sparc): Delete sparc_v9_p. New static local
1078 current_mach. Resort opcode table if current_mach changes.
1079 Generalize "insn not supported" test.
1080 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
1081 Delete test for v9/!v9.
1082 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
1084 (brfc): Split into CBR and FBR for coprocessor/fp branches.
1085 (brfcx): Renamed to FBRX.
1086 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
1087 coprocessor mnemonics are not supported on the sparclet).
1088 (condf): Renamed to CONDF.
1089 (SLCBCC2): Delete F_ALIAS flag.
1091 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
1093 * sparc-opc.c (sparc_opcodes): rd must be 0 for
1094 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
1096 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
1098 * Makefile.in (config.status): Depend upon BFD VERSION file, so
1099 that the shared library version number is set correctly.
1101 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
1103 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
1104 Miles Bader <miles@gnu.ai.mit.edu>.
1105 * configure: Rebuild.
1107 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
1109 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
1112 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
1114 * configure: Rebuild with autoconf 2.8.
1116 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
1118 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
1119 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
1121 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
1123 * configure.in: Don't set SHLIB or SHLINK to an empty string,
1124 since they appear as targets in Makefile.in.
1125 * configure: Rebuild.
1127 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
1129 * mpw-make.sed: Edit out shared library support bits.
1131 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
1133 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
1134 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
1135 (sparc_opcodes): Add sparclet insns.
1136 (sparclet_cpreg_table): New static local.
1137 (sparc_{encode,decode}_sparclet_cpreg): New functions.
1138 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
1140 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
1142 * i386-dis.c (index16): New static variable.
1143 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
1145 (OP_indirE): Return result of OP_E.
1146 (OP_E): Check for 16 bit addressing mode, and disassemble
1147 correctly. Optimised 32 bit case a little. Don't print
1148 "(base,index,scale)" when sib specifies only an offset.
1150 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
1152 * configure.in: Set and substitute SHLIB_DEP.
1153 * configure: Rebuild.
1154 * Makefile.in (SHLIB_DEP): New variable.
1155 (LIBIBERTY_LISTS, BFD_LIST): New variables.
1156 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
1157 COMMON_SHLIB, add them to piclist with appropriate modifications.
1158 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
1159 here: just use piclist.
1161 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
1163 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
1164 (print_insn_sparc): Rewrite v9/not-v9 tests.
1165 (compare_opcodes): Likewise.
1166 * sparc-opc.c (MASK_<ARCH>): Define.
1167 (v6,v7,v8,sparclite,v9,v9a): Redefine.
1168 (sparclet,v6notv9): Define.
1169 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
1170 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
1172 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
1174 * configure.in: Call AC_PROG_CC before configure.host.
1175 * configure: Rebuild.
1177 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
1179 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
1181 * i386-dis.c (onebyte_has_modrm): New static array.
1182 (twobyte_has_modrm): New static array.
1183 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
1185 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
1187 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
1190 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1192 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
1195 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
1197 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
1198 m68010up, not just m68020up | cpu32.
1200 * Makefile.in (SONAME): New variable.
1201 ($(SHLINK)): Make a link to the transformed name, as well.
1202 (stamp-tshlink): New target.
1203 (install): Skip stamp-tshlink during install.
1205 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
1207 * configure.in: Call AC_ARG_PROGRAM.
1208 * configure: Rebuild.
1209 * Makefile.in (program_transform_name): New variable.
1210 (install): Transform library name before installing it.
1212 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
1214 * i960-dis.c (mem): Add HX dcinva instruction.
1216 Support for building as a shared library, based on patches from
1217 Alan Modra <alan@spri.levels.unisa.edu.au>:
1218 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
1219 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
1220 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
1221 * configure: Rebuild.
1222 * Makefile.in (ALLLIBS): New variable.
1223 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
1224 (COMMON_SHLIB, SHLINK): New variables.
1225 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
1226 (STAGESTUFF): Remove variable.
1227 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
1228 (stamp-piclist, piclist): New targets.
1229 ($(SHLIB), $(SHLINK)): New targets.
1230 ($(OFILES)): Depend upon stamp-picdir.
1231 (disassemble.o): Build twice if PICFLAG is set.
1232 (MOSTLYCLEAN): Add pic/*.o.
1233 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
1234 (distclean): Remove pic and stamp-picdir.
1235 (install): Install shared libraries.
1236 (stamp-picdir): New target.
1238 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
1240 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
1241 Print unknown instruction as "unknown", rather than in hex.
1243 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
1245 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
1247 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
1249 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
1251 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
1253 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
1254 when necessary. From Ulrich Drepper
1255 <drepper@myware.rz.uni-karlsruhe.de>.
1257 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
1259 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
1260 sparc_num_opcodes. Update architecture enum values.
1261 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
1262 (sparc_opcode_lookup_arch): New function.
1263 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
1264 (sparc_opcodes): Add v9a shutdown insn.
1266 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
1268 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
1269 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
1271 (print_insn_sparc64): Deleted.
1272 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
1275 * sparc-opc.c (architecture_pname): Add v9a.
1277 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
1279 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
1280 incorrectly defined as 0x16 when it should be 0x15.
1281 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
1282 (alpha_insn_set): added cvtst and cvttq float ops. Also added
1283 excb (exception barrier) which is defined in the Alpha
1284 Architecture Handbook version 2.
1285 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
1286 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
1287 disassembled as or, for example.
1289 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
1291 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
1292 (_print_insn_mips): Change i from int to unsigned int.
1294 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
1296 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
1297 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
1299 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
1301 * i386-dis.c: Added Pentium Pro instructions.
1303 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1305 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
1308 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1310 * sh-opc.h (sh_nibble_type): Added REG_B.
1311 (sh_arg_type): Added A_REG_B.
1312 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
1314 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
1316 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
1318 * disassemble.c (disassembler): Use new bfd_big_endian macro.
1320 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
1322 * Makefile.in (distclean): Remove stamp-h. From Ronald
1323 F. Guilmette <rfg@monkeys.com>.
1325 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
1327 From David Mosberger-Tang <davidm@azstarnet.com>:
1328 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
1331 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1333 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
1334 (sh_table): Added many SH3 opcodes.
1335 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
1337 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1339 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
1340 (subco,subco.): Mark this PPC, not PPCCOM.
1342 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
1344 * configure: Rebuild with autoconf 2.7.
1346 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
1348 * configure: Rebuild with autoconf 2.6.
1350 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
1352 * configure.in: Sort list of architectures. Accept but do nothing
1353 for alliant, convex, pyramid, romp, and tahoe.
1355 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
1357 * a29k-dis.c (print_special): Change num to unsigned int.
1359 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
1361 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
1364 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
1366 * configure.in: Call AC_CHECK_PROG to find and cache AR.
1367 * configure: Rebuilt.
1369 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
1371 * configure.in: Add case for bfd_i860_arch.
1372 * configure: Rebuild.
1374 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
1376 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
1377 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
1378 (NEXTDOUBLE): Likewise.
1379 (print_insn_m68k): Don't match fmoveml if there is more than one
1380 register in the list.
1381 (print_insn_arg): Handle a place of '8' for a type of 'L'.
1383 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
1385 * m68k-opc.c: Use #W rather than #w.
1386 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
1388 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
1390 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
1391 and likewise for all the dbxx opcodes.
1393 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
1395 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
1397 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
1399 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
1400 the VR4100 specific instructions to the mips_opcodes structure.
1402 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
1404 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
1405 ugly Metrowerks bug in CW6, is fixed in CW7.
1407 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1409 * ppc-opc.c (whole file): Add flags for common/any support.
1411 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
1413 * Makefile.in (BISON): Remove macro.
1414 (FLAGS_TO_PASS): Remove BISON.
1416 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
1418 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1420 * m68k-dis.c (print_insn_m68k): Recognize all two-word
1421 instructions that take no args by looking at the match mask.
1422 (print_insn_arg): Always print "%" before register names.
1423 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
1424 [case '_']: Don't print "@#" before address.
1425 [case 'J']: Use "%s" as format string, not register name.
1426 [case 'B']: Treat place == 'C' like 'l' and 'L'.
1428 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
1430 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
1433 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
1435 From David Mosberger-Tang <davidm@azstarnet.com>
1437 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
1438 (alpha_insn_set): added definitions for VAX floating point
1439 instructions (Unix compilers don't generate these, but handcoded
1440 assembly might still use them).
1442 * alpha-dis.c (print_insn_alpha): added support for disassembling
1443 the miscellaneous instructions in the Alpha instruction set.
1445 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
1447 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
1448 no longer create sysdep.h, sed ppc-opc.c to work around a
1449 serious Metrowerks C bug.
1450 * mpw-make.in: Remove.
1451 * mpw-make.sed: New file, used by mpw-configure to edit
1452 Makefile.in into an MPW makefile.
1454 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
1456 * Makefile.in (maintainer-clean): New synonym for realclean.
1458 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
1460 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
1461 which use '0', '1', and '2' instead. Specify the proper size for
1462 a pmove immediate operand. Correct the pmovefd patterns to be
1463 moves to a register, not from a register.
1464 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
1466 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
1468 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
1469 %psr, %wim, %tbr as F_NOTV9.
1471 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
1473 * Makefile.in (Makefile): Just rebuild Makefile when running
1475 (config.h, stamp-h): New targets.
1476 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
1477 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
1478 rebuilding config.h.
1479 * configure: Rebuild.
1481 * mips-opc.c: Change unaligned loads and stores with "t,A"
1482 operands to use "t,A(b)".
1484 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1486 * sh-dis.c (print_insn_shx): Add F_FR0 support.
1488 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1490 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
1491 until 3 instead of until 2.
1493 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
1495 * Makefile.in (ALL_CFLAGS): Define.
1496 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
1497 (MOSTLYCLEAN): Add config.log.
1498 (distclean): Don't remove config.log.
1499 * configure.in: Substitute HDEFINES.
1500 * configure: Rebuild.
1502 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1504 * sh-opc.h (sh_arg_type): Add F_FR0.
1505 (sh_table, case fmac): Add F_FR0 as first argument.
1507 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1509 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
1511 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
1513 * sparc-dis.c: Remove all references to NO_V9.
1515 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
1517 * aclocal.m4: Just include ../bfd/aclocal.m4.
1518 * configure: Rebuild.
1520 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
1522 * sparc-dis.c (X_DISP19): Define.
1523 (print_insn, case 'G'): Use it.
1524 (print_insn, case 'L'): Sign extend displacement.
1526 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
1528 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
1529 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
1530 host_makefile_frag or frags.
1531 * aclocal.m4: New file.
1532 * configure: Rebuild.
1533 * Makefile.in (INSTALL): Set to @INSTALL@.
1534 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
1535 (INSTALL_DATA): Set to @INSTALL_DATA@.
1537 (AR_FLAGS): Set to rc rather than qc.
1538 (CC): Define as @CC@.
1539 (CFLAGS): Set to @CFLAGS@.
1540 (@host_makefile_frag@): Remove.
1541 (config.status): Remove dependency upon @frags@.
1543 * configure.in: ../bfd/config.bfd now just sets shell variables.
1544 Use them rather than looking through target Makefile fragments.
1545 * configure: Rebuild.
1547 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1549 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
1551 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
1553 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
1554 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
1557 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
1558 (lookup_{name,value}): New functions.
1559 (prefetch_table): New static local.
1560 (sparc_{encode,decode}_prefetch): New functions.
1561 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
1563 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1565 * sh-opc.h: Add blank lines to improve readabililty of sh3e
1568 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1570 * sh-dis.c: Correct comment on first line of file.
1572 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
1574 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
1576 * sparc-opc.c (asi, membar): New static locals.
1577 (sparc_{encode,decode}_{asi,membar}): New functions.
1578 (sparc_opcodes, membar insn): Fix.
1579 * sparc-dis.c (print_insn): Call sparc_decode_asi.
1580 Support decoding of membar masks.
1583 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
1585 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
1587 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
1589 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
1590 and likewise for the other branches. Add bhs as an alias for bcc,
1591 and likewise for the size variants. Add dbhs as an alias for
1594 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
1596 * sh-opc.h (FP sts instructions): Update to match reality.
1598 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
1600 * m68k-dis.c: (fpcr_names): Add % before all register names.
1601 (reg_names): Likewise.
1602 (print_insn_arg): Don't explicitly print % before register names.
1603 Add % before register names in static array names. In case 'r',
1604 print data registers as `@(Dn)', not `Dn@'. When printing a
1605 memory address, don't print @# before it.
1606 (print_indexed): Change base_disp and outer_disp from int to
1607 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
1608 syntax. Sign extend 8 byte displacement correctly.
1609 (print_base): Print using MIT syntax. Print zpc when appropriate.
1610 Change parameter disp from int to bfd_vma.
1612 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
1615 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
1617 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
1618 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
1619 * sh-opc.h (sh_arg_type): Add new operand types.
1620 (sh_table): Add new opcodes from SH3E Floating Point ISA.
1622 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1624 * Makefile.in (distclean): Remove generated file config.h.
1626 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1628 * Makefile.in (distclean): Remove generated file config.h.
1630 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
1632 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
1634 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
1636 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
1637 rather than numopcodes. Use m68k_opcodes rather than removed
1638 opcode function. Don't check F_ALIAS.
1639 (print_insn_arg): Change first parameter to be const char *.
1640 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
1641 (m68k-opc.o): New target.
1642 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
1643 * configure: Rebuild.
1645 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
1647 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
1648 (opcode_bits, opcode_hash_table): New variables.
1649 (opcodes_initialized): Renamed from opcodes_sorted.
1650 (build_hash_table): New function.
1651 (is_delayed_branch): Use hash table.
1652 (print_insn): Renamed from print_insn_sparc, made static.
1653 Build and use hash table. If !sparc64, ignore sparc64 insns,
1654 and vice-versa if sparc64.
1655 (print_insn_sparc, print_insn_sparc64): New functions.
1656 (compare_opcodes): Move sparc64 opcodes to end.
1657 Print commutative insns with constant second.
1658 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
1660 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
1662 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
1663 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
1664 avoids printing a delay slot in a delay slot.
1665 * sh-opc.h (sh_table): Fully bracket last entry.
1667 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
1669 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
1671 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
1673 * configure.in: Get host_makefile_frag from ${srcdir}.
1675 * configure.in: Autoconfiscated. Check for string[s].h. Create
1676 config.h from config.in. Don't set up sysdep.h link.
1677 * sysdep.h: New file.
1678 * configure, config.in: New files, generated from configure.in.
1679 * Makefile.in: Updated to be processed autoconf-style.
1680 (distclean): Keep sysdep.h. Remove config.log and config.cache.
1681 (Makefile): Depend on config.status.
1682 (config.status): New rule.
1683 * configure.bat: Update Makefile substitutions.
1685 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
1687 * mips-opc.c (L1): Define.
1688 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
1689 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
1692 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
1694 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
1695 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
1696 have multiple add units but only a single logical unit.
1698 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
1699 shifted by 18, without any insertion or extraction function.
1700 (insert_cr, extract_cr): Remove.
1703 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
1705 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
1708 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1710 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
1713 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
1715 * mpw-config.in: Add sh and i386 configs, remove sparc config.
1716 * sh-opc.h: Add copyright.
1718 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
1720 * Makefile.in (crunch-m68k): Delete extra target accidentally
1721 checked in a while ago.
1723 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1725 * sh-opc.h (sh_table): Add SH3 support.
1727 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
1729 * sh-opc.h: Added bsrf and braf.
1731 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
1733 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
1734 bogus [ls]fm{ea,fd} patterns.
1736 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
1737 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
1738 initialize it from memory. Make function static.
1739 (print_insn_{big,little}_arm): New functions.
1740 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
1741 the correct endianness.
1744 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
1746 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
1747 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
1750 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
1752 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
1755 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1757 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
1758 17th, so that it builds again using GCC as the compiler.
1760 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1762 * mips-dis.c (print_insn_little_mips): Cast return value from
1763 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
1764 expects an unsigned long, and that might be fewer words of
1765 argument storage (e.g., if bfd_vma is long long on a 32-bit
1767 (print_insn_big_mips): Likewise with bfd_getb32 value.
1768 (_print_insn_mips): Now static.
1770 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
1772 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
1773 gcc memory hog problem with initializer is fixed.
1776 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
1778 * arc-opc.c (NULL): Define.
1779 (arc_operands, insn fields u,s): Delete.
1780 (arc_operands, insn fields a,b,c): Mark as signed.
1781 (arc_opcodes): No longer const, links computed at run-time.
1782 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
1783 suffixes that affect the insn code.
1784 (arc_opcodes): Resort table to macros are first.
1785 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
1786 (arc_opcodes, st [b] entry): Likewise.
1787 (arc_opcodes, st [b,d] entry): Fix mask, value.
1788 (arc_reg_names): Add entries for r29, r30, r31, r60.
1789 (opcode_map, icode_map): New static globals.
1790 (arc_opcode_init_tables): Initialize them.
1791 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
1792 (insert_shimmoffset): Signal error if register present.
1794 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
1797 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
1799 Merge in support for Mac MPW as a host.
1800 (Old change descriptions retained for informational value.)
1802 * mpw-config.in (archname): Compute from the config.
1803 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
1805 * mpw-config.in (target_arch): Compute from canonical target.
1806 (m68k, mips, powerpc, sparc): Add architectures.
1807 * mpw-make.in (disassemble.c.o): Add.
1808 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
1810 * mpw-config.in (BFD_MACHINES): Set to a default value.
1811 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
1813 * mpw-make.in (CSEARCH): Add extra-include to search path.
1815 * mpw-config.in (varargs.h): Don't create.
1816 (sysdep.h): Create using forward-include.
1817 * mpw-make.in (CSEARCH): Add include/mpw to search path.
1819 * mpw-config.in: New file, MPW version of configure.in.
1820 * mpw-make.in: New file, MPW version of Makefile.in.
1823 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
1825 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
1826 Call arc_get_opcode_mach to map bfd mach number to opcode value.
1827 (print_insn_*): Pass bfd mach number, not opcode version.
1828 * arc-opc.c (arc_get_opcode_mach): New function.
1831 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1833 * alpha-dis.c (print_insn_alpha): Put empty statement after
1836 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
1838 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
1839 (low_sign_extend): Likewise.
1840 (get_field): Delete unused function.
1841 (set_field, deposit_14, deposit_21): Likewise.
1843 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1845 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
1848 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
1850 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
1852 * alpha-opc.h (OSF_ASMCODE): define
1853 print pal-code names as defined in App C of the
1854 Alpha Architecture Reference Manual
1856 * alpha-dis.c: cleaned up output
1857 print stylized code forms as defined in App A.4.3 of the
1858 Alpha Architecture Reference Manual
1860 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
1862 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
1864 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
1867 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1869 * m68k-dis.c (opcode): New function. Returns address of opcode
1870 table entry given index, even if the opcode table was split to
1871 work around gcc bugs.
1872 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
1874 (BREAK_UP_BIG_DECL): Make secondary array static and const.
1875 (reg_names): Now const.
1876 (print_insn_arg): Arrays cacheFieldName and names now const.
1877 (print_indexed): Array scales now const.
1880 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
1882 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
1883 (print_insn_arc_{host,graphics,audio}): Likewise.
1884 (print_insn): Add prototype.
1885 (arc_get_disassembler): New arg `big_p'. Return little or big
1886 print fn accordingly.
1887 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
1888 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
1889 (arc_opval_supported): Likewise.
1890 * disassemble.c (disassembler): Pass big endian flag to
1891 arc_get_disassembler.
1894 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
1896 * ppc-opc.c: Sort recently added instructions by minor opcode
1897 number within major opcode number.
1899 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
1901 * hppa-dis.c: Include libhppa.h.
1903 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
1905 * mips-opc.c: Change dli to use M_DLI, and add dla.
1907 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1909 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
1912 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
1914 * arc-dis.c (arc_get_disassembler): Change argument to int,
1915 one of bfd_mach_arc_xxx. All callers updated.
1918 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
1920 * mips-opc.c: Add r4650 mul instruction.
1922 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
1924 * mips-opc.c: Add uld and usd macros for unaligned double load and
1927 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1929 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
1930 mfdcr, mtdcr, icbt, iccci.
1933 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
1935 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
1936 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
1937 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
1938 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
1939 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
1940 (insert_absaddr): New function.
1942 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
1944 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
1945 New argument `cpu', pass it to arc_opcode_init_tables.
1946 Document byte order dependencies. Ignore unsupported insns.
1947 (arc_get_disassembler): New function.
1948 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
1949 print_insn_arc_audio): New functions.
1950 * arc-opc.c (MULTSHIFT operand): Delete.
1951 (UNSIGNED, SATURATION): New operands.
1952 (mac, mul, mul64, mulu64): New insns.
1953 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
1954 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
1955 (host,graphics,audio extended and auxiliary regs): Define.
1956 (ss, sc, mh, ml): New suffixes.
1957 (arc_opcode_supported, arc_opval_supported): New functions.
1958 (insert_multshift, extract_multshift): Deleted.
1959 * disassemble.c (disassembler, case bfd_arch_arc): Call
1960 arc_get_disassembler to get disassembler routine.
1963 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
1965 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
1966 signed char fields to shorts, more portable.
1968 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
1970 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
1971 char fields as signed chars, since they may have negative values.
1973 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1975 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
1976 (mycroft@netbsd.org).
1978 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
1980 From "Logg, Ed" <elogg@ea.com>:
1981 * ppc-opc.c (extract_bdm): Correct parenthezisation.
1982 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
1985 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
1987 * ppc-opc.c: Changes based on patch from David Edelsohn
1988 <edelsohn@mhpcc.edu>.
1989 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
1992 (insert_tbr): New static function.
1993 (extract_tbr): New static function.
1994 (XFXFXM_MASK, XFXM): Define.
1995 (XSPRBAT_MASK, XSPRG_MASK): Define.
1996 (powerpc_opcodes): Add instructions to access special registers by
1997 name. Add mtcr and mftbu.
1999 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2001 * mips-opc.c (P3): Define.
2002 (mips_opcodes): Add mad and madu.
2004 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2006 * configure.in: Add W65 support.
2007 * disassemble.c: Likewise.
2008 * w65-opc.h, w65-dis.c: New files.
2010 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2012 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2016 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
2018 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
2020 * arc-opc.c (extract_reladdr): New function.
2021 (insert_reladdr): Store address right-shifted by 2.
2024 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2026 * mips-opc.c: Add dli as a synonym for li.
2029 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
2031 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
2033 (extraction fns): Insn argument now array of two words. Return pointer
2034 to value's table entry. All uses changed.
2035 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
2036 (insert_multshift, extract_multshift): New fns.
2037 (arc_operands): Add support for cache bypass suffix. Add support for
2038 predefined aux regs. Modifier bits moved to flags field.
2039 (arc_opcodes): Likewise.
2040 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
2041 New insn rlc. Update to syntax in programmer's manual.
2042 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
2043 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
2045 (arc_opcode_init_tables): New argument to indicate cpu type.
2046 (insert_reg): Handle predefined aux regs.
2047 (extract_reg): Likewise.
2048 (lookup_register): New fn.
2049 * arc-dis.c (arc_condition_codes): Deleted.
2050 (print_insn_arc): Handle insns with 32 bit immediate constants better.
2051 Clean up modifier handling. Handle predefined aux regs.
2054 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2056 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2057 print something for reserved opcode values, even if it won't
2060 * mips-dis.c (_print_insn_mips): When initializing, shift right
2061 and mask, to avoid sign extension problems on the Alpha.
2063 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2067 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
2069 * configure.in: Add ARC support.
2070 * disassemble.c: Likewise.
2071 * arc-dis.c, arc-opc.c: New files.
2074 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2076 * sh-opc.h (mov.l gbr): Get direction right.
2077 * sh-dis.c (print_insn_shx): New function.
2078 (print_insn_shl, print_insn_sh): Call print_insn_shx to
2079 print opcodes with right byte order.
2081 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2083 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2084 to avoid conflicts with getopt.
2086 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2088 * hppa-dis.c (print_insn_hppa): Read the instruction using
2089 bfd_getb32, so that it works on a little endian or 64 bit host.
2090 Remove unused local variable op.
2092 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2094 * mips-opc.c: Use or instead of addu for pseudo-op move, since
2095 addu does not work correctly if -mips3.
2097 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2099 * a29k-dis.c (print_special): Add special register names defined
2100 on 29030, 29040 and 29050.
2101 (print_insn): Handle new operand type 'I'.
2103 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2105 * Makefile.in (INSTALL): Use top level install.sh script.
2107 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2109 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2110 that it works on a little endian host.
2112 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2114 * configure.in: Use ${config_shell} when running config.bfd.
2116 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2118 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2120 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2122 * a29k-dis.c (print_insn): Print the opcode.
2124 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2126 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2128 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
2130 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2132 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2134 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2135 which store a value into memory.
2137 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2139 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2140 * arm-dis.c, arm-opc.h: New files.
2142 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
2144 * Makefile.in (ns32k-dis.o): Add dependency.
2145 * ns32k-dis.c (print_insn_arg): Declare initialized local as
2146 string, not as array of chars.
2148 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2150 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2152 * sparc-opc.c: Added sparclite extended FP operations, and
2153 versions of v9 impdep* instructions permitting specification of
2156 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2158 * i960-dis.c (reg_names): Now const.
2159 (struct sparse_tabent): New type, copied from array type in mem
2161 (ctrl): Local static array ctrl_tab now const.
2162 (cobr): Local static array cobr_tab now const.
2163 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2164 static variable mem_tab no longer explicitly initialized. Changed
2165 mem_init to const array of struct sparse_tabent.
2166 (reg): Local static variable reg_tab no longer explicitly
2167 initialized. Changed reg_init to const array of struct
2169 (ea): Local static array scale_tab now const.
2171 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2174 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2176 * configure.bat: the disassember needs to be enabled for
2177 "objdump -d" to work in djgpp.
2179 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2181 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2182 (invalid_float): Enabled general version, doesn't require running
2183 on ns32k host. Changed to take char* argument, and test for
2184 explicitly specified sizes, instead of using sizeof() on host CPU
2186 (INVALID_FLOAT): Cast first argument.
2187 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2188 list_P032, list_M032): Now const.
2189 (optlist, list_search): Made appropriate arguments now point to
2191 (print_insn_arg): Changed static array of one-character-string
2192 pointers into a static const array of characters; fixed sprintf
2193 statement accordingly.
2195 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2197 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
2198 from distribution. A ns32k-dis.c from a previous distribution has
2199 been brought up to date and supports the new interface.
2201 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2203 * configure.in: add bfd_ns32k_arch target support.
2205 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2206 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2208 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2210 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2213 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
2215 * h8300-dis.c, mips-dis.c: Don't use true and false.
2217 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2219 * configure.in: Change --with-targets to --enable-targets.
2221 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2223 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2224 opcodes to the first instruction with that opcode, to speed
2225 disassembly of large files. From ralphc@pyramid.com (Ralph
2228 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2230 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
2232 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
2234 * configure.bat: update to latest makefile.in
2236 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
2238 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
2239 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
2240 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
2241 slot insn is in a delay slot.
2242 * z8k-opc.h: (resflg): Fix patterns.
2243 * h8500-opc.h Fix CR insn patterns.
2245 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2247 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
2248 "cmpl" before POWER versions, so that gas -many uses them.
2250 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2252 * disassemble.c: New file.
2253 * Makefile.in (OFILES): Add disassemble.o.
2254 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
2255 * configure.in: Define ARCHDEFS in Makefile. Code taken from
2256 binutils/configure.in.
2258 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
2259 opcode being examined.
2261 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2263 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
2264 (insert_ral, insert_ram, insert_ras): New functions.
2265 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
2266 RAS for store with update.
2268 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2270 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
2271 (edelsohn@npac.syr.edu).
2273 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2275 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
2278 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
2280 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
2282 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2284 * ppc-opc.c (powerpc_operands): The signedp field has been
2285 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
2286 instead. Add new operand SISIGNOPT.
2287 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
2288 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
2289 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
2292 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2294 * i386-dis.c (struct private): Renamed to dis_private. `private'
2295 is a reserved word for dynix cc.
2297 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2299 * configure.in: Change error message to refer to bfd/config.bfd
2300 rather than bfd/configure.in.
2302 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
2304 * ppc-opc.c: Define POWER2 as short alias flag.
2305 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
2308 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2310 * i960-dis.c (print_insn_i960): Don't read a second word for
2311 opcodes 0, 1, 2 and 3.
2313 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2315 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
2317 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2319 * m68881-ext.c: Removed; no longer used.
2320 * Makefile.in: Changed accordingly.
2322 * m68k-dis.c (ext_format_68881): Don't declare.
2323 (print_insn_m68k): If an instruction uses place 'i', it uses at
2324 least four fixed bytes.
2325 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
2326 extended float, convert to double using floatformat_to_double, not
2327 ieee_extended_to_double, and fetch the data before converting it.
2329 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2331 * mips-opc.c: It's sqrt.s, not sqrt.w. From
2332 davidj@ICSI.Berkeley.EDU (David Johnson).
2334 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2336 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
2337 PowerPC uses bdnz[l][a].
2339 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2341 * dis-buf.c, i386-dis.c: Include sysdep.h.
2343 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2345 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
2347 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
2348 by Motorola PowerPC 601 with PPC_OPCODE_601.
2349 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
2350 Disassemble Motorola PowerPC 601 instructions as well as normal
2351 PowerPC instructions.
2353 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
2355 * i960-dis.c (reg, mem): Just use a static array instead of
2358 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2360 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
2361 condition name index if this is for a negated condition.
2363 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
2364 Floating point format for 'H' operand is backwards from normal
2365 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
2366 operands (fmpyadd and fmpysub), handle bizarre register
2367 translation correctly for single precision format.
2369 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
2370 or 'I' operands if the next format specifier is 'M' (fcmp
2371 condition completer).
2373 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2375 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
2376 single number giving a bitmask for the MB and ME fields of an M
2377 form instruction. Change NB to accept 32, and turn it into 0;
2378 also turn 0 into 32 when disassembling. Seperated SH from NB.
2379 (insert_mbe, extract_mbe): New functions.
2380 (insert_nb, extract_nb): New functions.
2381 (SC_MASK): Mask out SA and LK bits.
2382 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
2383 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
2384 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
2385 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
2386 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
2387 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
2388 (powerpc_macros): Define table of macro definitions.
2389 (powerpc_num_macros): Define.
2391 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
2392 if PPC_OPERAND_NEXT is set.
2394 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2396 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
2397 char. Retrieve contents using bfd_getl32 instead of shifting.
2399 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2401 * ppc-opc.c: New file. Opcode table for PowerPC, including
2402 opcodes for POWER (RS/6000).
2403 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
2404 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
2405 (CFILES): Add ppc-dis.c.
2406 (ppc-dis.o, ppc-opc.o): New targets.
2407 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
2409 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2411 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
2412 No space before 'u', 'f', or 'N'.
2414 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
2416 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
2417 farther than we should.
2419 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
2421 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2423 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
2425 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2427 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
2428 needs it, to prevent reading past the end of a section.
2430 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2432 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
2433 Removed t,A case for la; always use t,A(b) case.
2435 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2437 From Ted Lemen <mellon@pepper.ncd.com>
2438 * mips-dis.c (print_insn_arg): Handle 'k'.
2439 * mips-opc.c: Make cache use k, not t.
2441 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2443 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
2444 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
2445 FLOAT_FORMAT_CODE to put out floating point register names.
2447 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2449 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
2451 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2453 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
2455 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2457 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
2458 larger than 32. Moved dsxx32 variants first for disassembler.
2460 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2462 * z8kgen.c, z8k-opc.h: Add full lda information.
2464 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
2466 * hppa-dis.c (print_insn_hppa): Do not emit a space after
2467 movb instructions. Any necessary space will be emitted by
2468 the code to handle nullification completers.
2470 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2472 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
2474 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2476 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
2477 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
2479 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2481 * mips-opc.c: Correct lwu opcode value (book had it wrong).
2483 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2485 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
2486 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
2488 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
2490 * m88k-dis.c (m88kdis): comment change. Remove space after
2492 (printop): handle new arg types DEC and XREG for m88110.
2494 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
2496 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
2497 type for absolute branch addresses. Delete special
2498 "ble" and "be" code in 'W' operand code.
2500 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2502 * mips-opc.c: Set hazard information correctly for branch
2503 likely instructions.
2505 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2507 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
2508 info->fprintf_func for printing and info->print_address_func for
2511 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2513 * mips-opc.c: Set INSN_TRAP for tXX instructions.
2515 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2517 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
2518 Corrected second case of "b" for disassembler.
2520 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2522 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
2523 to BFD swapping routines to correspond to BFD name changes.
2525 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2527 * mips-opc.c: Change div machine instruction to be z,s,t rather
2528 than s,t. Change div macro to be d,v,t rather than d,s,t.
2529 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
2530 rem and remu which generates only the corresponding div
2531 instruction. This is for compatibility with the MIPS assembler,
2532 which only generates the simple machine instruction when an
2533 explicit destination of $0 is used.
2534 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
2536 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2538 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
2539 WR_31 hazard for bal, bgezal, bltzal.
2541 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2543 * hppa-dis.c (print_insn_hppa): Use print function
2544 from within the disassemble_info, not fprintf_filtered.
2546 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2548 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
2549 Law, law@cs.utah.edu.)
2551 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2553 * mips-opc.c ("absu"): Removed.
2556 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2558 * mips-opc.c: Added r6000 and r4000 instructions and macros.
2559 Changed hazard information to distinguish between memory load
2560 delays and coprocessor load delays.
2562 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2564 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
2566 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2568 * configure.in: Don't pass cpu to config.bfd.
2570 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2572 * m88k-dis.c (m88kdis): Make class unsigned.
2574 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
2576 * alpha-dis.c (print_insn_alpha): One branch format case was
2577 missing the instruction name.
2579 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2581 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
2582 Add the arch-specific auxiliary files.
2583 (OFILES): Remove the arch-specific auxiliary files
2584 and use BFD_MACHINES instead of DIS_LIBS.
2585 * configure.in: Set BFD_MACHINES based on --with-targets option.
2587 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2589 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
2592 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2594 * sparc-opc.c: Change CONST to const to deal with gcc
2595 -Dconst=__const -traditional.
2597 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2599 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
2600 coprocessor instructions out of #if 0, and made them use new
2603 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2605 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
2607 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
2609 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
2610 instruction, for use by the disassembler.
2612 * sparc-dis.c (SEX): Add sign extension macro. Replace many
2613 hand-coded sign extensions that depended on 32-bit host ints.
2614 FIXME, we still depend on big-endian host bitfield ordering.
2615 (sparc_print_insn): Set the insn_info_valid field, and the
2616 other fields that describe the instruction being printed.
2618 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
2620 * sparc-opc.c (call): Accept all 6 addressing modes valid for
2621 `jmp' instead of just one of them.
2623 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2625 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
2626 (fput_fp_reg_r): Renamed from fput_reg_r.
2627 (fput_fp_reg): New function.
2628 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
2630 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
2632 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
2634 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2636 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
2638 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
2639 don't output a space.
2641 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
2643 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
2645 * mips-opc.c: New file, containing opcode table from
2646 ../include/opcode/mips.h.
2647 * Makefile.in: Add it.
2649 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2651 * m88k-dis.c: New file, moved in from gdb and changed to use the
2652 new dis-asm.h disassembler interface.
2653 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
2654 (m88k-dis.o): New target.
2656 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
2658 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
2659 argument string const char * to correspond to opcode/mips.h.
2661 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
2663 * mips-dis.c: Updated to account for name changes in new version
2665 * Makefile.in: Added header file dependencies.
2667 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
2669 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
2671 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2673 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
2674 extend, rather than shifts.
2676 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
2678 * Makefile.in: Undo 15 June change.
2680 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
2682 * m68k-dis.c (print_insn_arg): Change return value to byte count
2684 * m68k-dis.c: Re-write to detect invalid operands before
2685 printing anything, so we can handle this the same way we
2686 handle invalid opcodes.
2688 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2690 * sh-dis.c, sh-opc.h: Understand some more opcodes.
2692 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
2694 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
2697 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2699 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
2701 * configure.in: Do make sysdep.h link.
2702 * Makefile.in: Search ../include. Don't search ../bfd.
2704 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
2706 Changes from Jeff Law, law@cs.utah.edu:
2707 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
2708 Do not print a space before the completers specified by
2711 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
2713 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
2714 defined, since gdb has been fixed.
2716 Changes from Jeff Law, law@cs.utah.edu:
2717 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
2718 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
2719 be a *disassemble_info, not a *FILE.
2720 * hppa-dis.c: Support 'd', '!', and 'a'.
2721 * hppa-dis.c: Support 's' to extract a 2 bit space register.
2722 * hppa-dis.c: Delete cases which are no longer needed.
2724 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
2726 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
2728 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2730 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
2733 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
2735 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
2736 * configure.in: No longer need to configure to get sysdep.h.
2738 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
2740 * Patches from Jeffrey Law <law@cs.utah.edu>.
2741 * hppa-dis.c: Support 'I', 'J', and 'K' in output
2742 templates for 1.1 FP computational instructions.
2744 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2746 * h8500-dis.c (print_insn_h8500): Address argument is type
2748 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
2751 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
2752 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
2754 * sparc-dis.c (compare_opcodes): Move static declaration to
2757 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2759 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
2760 instruction, remove unimp hack from 'l' argument.
2762 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
2764 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
2767 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
2769 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
2770 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
2773 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2775 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
2776 arrays of string pointers to 2-d arrays of chars, to save
2779 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
2781 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
2782 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
2784 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2786 * hppa-dis.c: New file from Utah, adapted to new disassembler
2788 * Makefile.in: Include it.
2790 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2792 * sh-dis.c, sh-opc.h: New files.
2794 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2796 * alpha-dis.c, alpha-opc.h: New files.
2798 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2800 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
2803 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
2805 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
2807 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
2809 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
2812 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
2814 * sparc-dis.c: Use fprintf_func a few places where I forgot,
2815 and double percent signs a few places.
2817 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
2819 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
2820 Use info->print_address_func not print_address.
2822 * dis-buf.c (generic_print_address): New function.
2824 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2826 * Makefile.in: Add sparc-dis.c.
2827 sparc-dis.c: New file, merges binutils and gdb versions as follows:
2829 Add `add' instruction to the set that get checked
2830 for a preceding `sethi' in order to print an absolute address.
2831 * (print_insn): Disassembly prefers real instructions.
2832 (is_delayed_branch): Speed up.
2833 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
2834 Still missing some float ops, and needs testing.
2835 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
2836 F_ALIAS. Use printf, not fprintf, when not passing a file
2838 (compare_opcodes): Check that identical instructions have
2839 identical opcodes, complain otherwise.
2842 * Include reg_names.
2844 Use dis-asm.h/read_memory_func interface.
2846 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
2848 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
2849 deliberately return non-zero to setjmp from longjmp. Otherwise
2850 this code fails to compile.
2852 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
2854 * m68k-dis.c: Fix prototype for fetch_arg().
2856 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2858 * dis-buf.c: New file, for new read_memory_func interface.
2859 Makefile.in (OFILES): Include it.
2860 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
2861 Use new read_memory_func interface.
2863 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2865 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
2866 * h8500-opc.h: Fix couple of opcodes.
2868 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
2870 * Makefile.in: add dvi & installcheck targets
2872 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
2874 * Makefile.in: Update for h8500-dis.c.
2876 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2878 * h8500-dis.c, h8500-opc.h: New files
2880 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
2882 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
2883 ../include/dis-asm.h.
2884 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
2885 and ../gdb/m68k-pinsn.c).
2886 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
2887 and ../gdb/i386-pinsn.c).
2888 * m68881-ext.c: New file. Moved definition of
2889 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
2890 * Makefile.in: Adjust for new files.
2891 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
2892 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
2893 can be dis-assembled.
2895 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2897 * mips-dis.c (print_insn_arg): Now returns void.
2899 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
2901 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
2902 files that use the macros.
2904 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2906 * mips-dis.c: New file, from gdb/mips-pinsn.c.
2907 * Makefile.in (DIS_LIBS): Added mips-dis.o.
2908 (CFILES): Added mips-dis.c.
2910 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2912 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
2913 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
2915 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
2917 * Makefile.in: Improve *clean rules.
2918 * configure.in: Allow a default host.
2920 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2922 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
2923 files include other sysdep files
2925 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2927 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
2929 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
2931 * configure.in: For host support, use ../bfd/configure.host
2932 so it stays in sync with the ../bfd/hosts database.
2934 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2936 * configure.in: use cpu-vendor-os triple instead of nested cases
2938 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
2940 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
2941 *always* the wrong one.
2943 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2945 * z8kgen.c: added copyright info
2947 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2949 * z8k-dis.c (unparse_instr): prettier tabs
2950 * z8kgen.c -> z8k-opc.h: bug fixes in tables
2952 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
2954 * configure.in: Add ncr* configuration.
2955 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
2956 picayune ANSI compilers happy.
2958 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
2960 * configure.in (i386): Make i386 and i486 synonymous for now.
2961 * configure.in (i[34]86-*-sysv4): Add my_host definition.
2963 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2965 * Makefile.in (install): Fix typo.
2967 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
2969 * Makefile.in (make): Remove obsolete crud.
2970 (sparc-opc.o): Avoid Sun Make VPATH bug.
2972 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
2974 * Makefile.in: since there are no SUBDIRS, remove rule and
2975 references of subdir_do.
2977 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2979 * Makefile.in (install): Get the library name right here too.
2980 Don't install bfd.h, since it's unrelated to this library. No
2981 subdirs to recurse into, either.
2982 (CFILES): The source file has a .c suffix, not .o.
2984 * sparc-opc.c: New file, moved from BFD.
2985 * Makefile.in (OFILES): Build it.
2987 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
2989 * z8k-dis.c: fixed forward refferences of some declarations.
2991 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
2993 * Makefile.in: get the name of the library right
2995 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2997 * z8k-dis.c: knows how to disassemble z8k stuff
2998 * z8k-opc.h: new file full of z8000 opcodes
3002 version-control: never