2 Fri Jan 23 01:49:24 1998 Doug Evans <devans@seba.cygnus.com>
4 * txvu-opc.c (txvu_operands, UBC): Add extract entry.
5 (txvu_operands, UACCDEST): Not a fake operand.
6 (txvu_operands, UXYZ): Move parse entry to insert entry.
7 (txvu_operands, LVI01): Not a fake operand.
8 (txvu_upper_opcodes): Fix spelling of minii instruction.
9 (printf_vfreg): Print register number with "%02ld".
10 (print_bcftreg): Likewise.
11 (print_accdest): Pass `dest' to _print_dest.
12 (insert_xyz): Renamed from parse_xyz.
15 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
17 * d10v-dis.c (PC_MASK): Correct value.
18 (print_operand): If there's a reloc, don't calculate the
19 address because they could be in different sections.
22 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
24 * cgen.sh: Rewrite to be like simulator's version.
25 * Makefile.am (cgen): Update call to cgen.sh.
26 * Makefile.in: Regenerate
29 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
31 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
32 instruction after the 4650's "mul" instruction; nobody's using the
33 4010 these days. If object files someday indicate which processor
34 variant they're intended for, we can do a better job at this.
37 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
39 * mips-opc.c (c.lt.s): Add r5900 variant.
43 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
45 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
46 table provided entry size. Use CGEN_INSN_MNEMONIC.
47 (cgen_parse_keyword): Rewrite.
48 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
49 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
50 * cgen-opc.c: Clean up pass over `struct foo' usage.
51 (cgen_keyword_lookup_value): Handle "" entry.
52 (cgen_keyword_add): Likewise.
54 * Makefile.am: Add cgen support.
55 * Makefile.in: Regenerate.
56 * configure.in: Add cgen support.
57 * configure: Regenerate.
58 * aclocal.m4: Regenerate.
59 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
63 Tue Jan 6 13:08:14 1998 Doug Evans <devans@seba.cygnus.com>
65 * txvu-dis.c (print_insn_txvu): Handle no separator between
66 upper and lower insn #ifndef VERTICAL_BAR_SEPARATOR.
68 Mon Jan 5 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
70 * txvu-dis.c, txvu-opc.c: New files.
71 * configure.in: Compile them.
72 * configure: Regenerate.
73 * Makefile.am (ALL_MACHINES): Add txvu-{dis,opc}.lo.
74 (txvu-dis.lo,txvu-opc.lo): Add rules for.
75 * Makefile.in: Regenerate.
77 Mon Dec 22 17:17:03 1997 Doug Evans <devans@canuck.cygnus.com>
79 * configure.in: Add txvu support.
80 * configure: Regenerate.
81 * disassemble.c: Add txvu support.
84 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
86 * mips-opc.c: Add FP_D to s.d instruction flags.
88 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
90 * m68k-opc.c (halt, pulse): Enable them on the 68060.
93 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
95 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
96 PC relative offset forms before the 15 bit forms. An assembler command
97 line option now chooses the default.
101 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
103 * mips-opc.c: Add many missing r5900 instructions.
107 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
109 * d30v-opc.c (d30v_opcode_table): Set new flags bits
110 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
113 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
115 * configure: Only build libopcodes shared if --enable-shared's value
116 was `yes', or was set to `*opcodes*'.
117 * aclocal.m4: Likewise.
118 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
119 original source of this bit of code. It's not clear what the best fix
123 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
125 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
128 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
130 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
131 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
132 offset forms before the 15 bit forms, to default to the long forms.
135 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
137 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
139 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
141 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
142 symbol if none is present.
143 (print_insn_big_arm): Prevent examination of stored symbol if
146 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
148 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
150 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
152 * disassemble.c: Remove disasm_symaddr() function.
154 * arm-dis.c: Use info->symbol instead of info->flags to determine
155 if disassmbly should be in Thumb or Arm mode.
157 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
159 * arm-dis.c: Add support for disassembling Thumb opcodes.
160 (print_insn_thumb): New function.
162 * disassemble.c (disasm_symaddr): New function.
164 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
165 (thumb_opcodes): Table of Thumb opcodes.
167 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
169 * m68k-opc.c (btst): Change Dd@s to Dd;b.
171 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
172 and 'v' as operand types.
174 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
176 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
177 <olivier.carmona@di.epfl.ch>.
178 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
179 which has a two word opcode with a one word argument.
182 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
184 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
185 unsigned, not signed.
186 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
190 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
192 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
193 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
194 (ftrv): Slay the cut-and-paste monster.
197 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
199 * d10v-dis.c (print_operand):
200 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
202 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
204 * d10v-opc.c (OPERAND_FLAG): Split into:
205 (OPERAND_FFLAG, OPERAND_CFLAG) .
209 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
211 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
212 field for all INSN_MACRO's.
215 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
217 * mips-opc.c (sync,cache): These are 3900 insns.
219 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
221 sh-opc.h (sh_table): Remove ftst/nan.
223 start-sanitize-vr5400
224 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
226 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
227 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
229 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
233 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
235 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
236 Add tx49 insns and configury.
239 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
241 * mips-opc.c (ffc, ffs): Fix mask.
244 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
246 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
250 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
252 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
253 start-sanitize-vr5400
254 Added VR5400 instructions.
255 (N5): New cpu-id macro.
257 (WR_HILO, RD_HILO, MOD_HILO): New macros.
259 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
261 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
262 (WR_HILO, RD_HILO, MOD_HILO): New macros.
264 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
266 * v850-dis.c (disassemble): Replace // with /* ... */
268 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
270 * sparc-opc.c: Add wr & rd for v9a asr's.
271 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
272 (v9a_asr_reg_names): New variable.
273 Patch from David Miller <davem@vger.rutgers.edu>.
275 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
277 * sparc-opc.c (v9notv9a): New insn type.
278 (IMPDEP): Move to the end to not conflict with edge8 et al.
279 Patch from David Miller <davem@vger.rutgers.edu>.
281 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
283 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
285 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
287 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
289 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
291 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
292 of disassemble_info structure to determine if an overlay address
293 has a matching symbol in low memory.
295 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
296 new symbol_at_address_func field in disassemble_info structure.
298 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
300 * v850-opc.c (extract_d22): Use signed arithmatic.
302 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
304 * mips-opc.c: Three op mult is not an ISA insn.
306 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
308 * mips-opc.c: Fix formatting.
310 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
312 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
313 than assuming that char is signed. Explicitly sign extend 16 bit
314 values, rather than assuming that short is 16 bits.
315 (OP_sI, OP_J, OP_DIR): Likewise.
318 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
320 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
324 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
326 * v850-opc.c: Fix typo in comment.
328 * v850-dis.c (disassemble): Add test of processor type when
331 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
333 * configure.in: Use a diversion to set enable_shared before the
334 arguments are parsed.
335 * configure: Rebuild.
337 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
339 * m68k-opc.c (TBL1): Use ! rather than `.
340 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
342 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
344 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
346 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
348 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
351 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
352 * aclocal.m4: Rebuild with new libtool.
353 * configure: Rebuild.
356 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
358 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
361 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
363 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
365 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
367 * v850-opc.c (v850_opcodes): Further rearrangements.
370 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
372 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
375 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
377 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
380 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
382 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
384 * mips16-opc.c: Added mips16 sdbbp.
387 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
389 * v850-opc.c: Initialise processors field of v850_opcode structure.
392 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
394 Merge changes from Martin Hunt:
396 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
398 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
399 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
400 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
402 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
404 * d30v-dis.c (print_insn): First operand of d*i (delayed
405 branch) instructions is relative.
407 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
408 (d30v_operand_table): Add IMM6S3 type.
409 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
411 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
412 and cmp instructions.
414 * d30v-opc.c: Correct entries for repeat*, and sat*.
415 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
416 types. Correct several formats.
418 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
420 * d30v-opc.c (pre_defined_registers): Change control registers.
422 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
423 SHORT_C2. Manual was incorrect.
425 * d30v-dis.c (lookup_opcode): Return value now indicates
426 if an opcode has a short and a long form. Used for deciding
427 to append a ".s" or ".l".
428 (print_insn): Append a ".s" to an instruction if it is
429 the short form and ".l" if it is a long form. Do not append
430 anything if the instruction has only one possible size.
432 * d30v-opc.c: Change mulx2h to require an even register.
433 New form: SHORT_A2; a SHORT_A form that needs an even
434 register as the first operand.
436 * d30v-dis.c (print_insn_d30v): Fix problem where the last
437 instruction was not being disassembled if there were an odd
438 number of instructions.
440 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
444 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
446 * v850-dis.c (disassemble): Improved display of register lists.
449 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
451 * sparc-opc.c (sparc_opcodes): Fix assembler args to
452 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
453 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
454 fandnot1s, fandnot2s.
456 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
458 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
460 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
462 * cgen-asm.c (cgen_parse_address): New argument resultp.
464 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
466 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
468 * mn10200-dis.c (disassemble): PC relative instructions are
469 relative to the next instruction, not the current instruction.
471 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
473 * v850-dis.c (disassemble): Only signed extend values that are not
474 returned by extract functions.
475 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
477 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
479 * v850-opc.c: Update comments. Remove use of
480 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
482 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
484 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
486 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
488 * configure: Rebuilt with latest devo autoconf for NT support.
490 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
492 * v850-dis.c (disassemble): Use curly brace syntax for register
495 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
496 where r0 is being used as a destination register.
499 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
501 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
505 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
507 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
508 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
509 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
510 Add insns to access SGR and DBR.
511 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
514 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
516 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
519 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
521 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
522 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
525 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
527 * configure (cgen_files): Add support for v850e target.
528 * configure.in (cgen_files): Add support for v850e target.
530 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
532 * configure (cgen_files): Add support for v850ea target.
533 * configure.in (cgen_files): Add support for v850ea target.
536 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
538 * configure.in (bfd_arc_arch): Add.
539 * configure: Rebuild.
540 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
541 * Makefile.in: Rebuild.
542 * arc-dis.c, arc-opc.c: New files.
543 * disassemble.c (ARCH_all): Define ARCH_arc.
544 (disassembler): Add ARC support.
546 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
549 * v850-dis.c (disassemble): Add support for v850EA instructions.
551 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
552 (v850_opcodes): Add v850EA instructions.
554 * v850-dis.c (disassemble): Add support for v850E instructions.
556 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
557 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
558 insert_spe, extract_spe): New Functions.
559 (v850_opcodes): Add v850E instructions.
562 * v850-opc.c: Reorganised and re-layed out to improve readability
565 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
567 * configure: Rebuild with autoconf 2.12.1.
569 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
571 * aclocal.m4, configure: Rebuild with new automake patches.
573 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
575 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
576 * acinclude.m4: Just include acinclude.m4 from BFD.
577 * aclocal.m4, configure: Rebuild.
579 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
581 * Makefile.am: New file, based on old Makefile.in.
582 * acconfig.h: New file.
583 * acinclude.m4: New file.
584 * stamp-h.in: New file.
585 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
586 Removed shared library handling; now handled by libtool. Replace
587 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
588 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
589 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
590 handling in AC_OUTPUT.
591 * dep-in.sed: Change .o to .lo.
592 * Makefile.in: Now built with automake.
593 * aclocal.m4: Now built with aclocal.
594 * config.in, configure: Rebuild.
596 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
598 * mips-opc.c: Fix typo/thinko in "eret" instruction.
601 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
603 * mips-opc.c: Fix coding of mtsa.
606 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
608 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
610 * sparc-dis.c (sorted_opcodes): New static local.
611 (struct opcode_hash): `opcode' is pointer to const element.
612 (build_hash): First arg is now table of sorted pointers.
613 (print_insn_sparc): Sort opcodes by sorting table of pointers.
614 (compare_opcodes): Update.
616 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
618 * cgen-opc.c: #include <ctype.h>.
619 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
620 Handle case insensitive hashing.
621 (hash_keyword_value): Change type of `value' to unsigned int.
623 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
625 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
626 precision FP, mark it as such. Likewise for double precision
627 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
630 (mips_builtin_opcodes): Remove non-existant r5900 instructions
634 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
636 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
637 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
640 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
642 * ppc-opc.c (extract_nsi): make unsigned expression signed before
644 (UNUSED): remove one level of parens, so MSVC doesn't choke on
645 nesting depth when all the macros are expanded.
647 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
649 * sparc-opc.c: The fcmp v9a instructions take an integer register
650 as a destination, not a floating point register. From Christian
651 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
653 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
655 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
656 syntax. From Roman Hodek
657 <rnhodek@faui22c.informatik.uni-erlangen.de>.
659 * i386-dis.c (twobyte_has_modrm): Fix pand.
661 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
663 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
665 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
667 * arm-dis.c: Add prototypes for arm_decode_shift and
670 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
672 * mips-opc.c: Add r3900 insns.
674 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
676 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
677 print delay slot instructions on the same line. When using a PC
678 relative load, add a comment with the value being loaded if it can
681 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
683 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
684 to pushS/popS for segment regs and byte constant so that
685 pushw/popw printed when in 16 bit data mode.
687 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
688 print cbtw, cwtd in 16 bit data mode.
689 * i386-dis.c (putop): extra case W to support above.
691 * i386-dis.c (print_insn_x86): print addr32 prefix when given
692 address size prefix in 16 bit address mode.
694 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
696 * sh-dis.c: Reindent. Rename local variable fprintf to
699 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
701 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
703 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
705 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
707 * mips16-opc.c (mip16_opcodes): same.
709 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
711 * m68k-opc.c (moveb): Change $d to %d.
713 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
715 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
716 (twobyte_has_modrm): Likewise.
718 (OP_MMX, OP_EM, OP_MS): New static functions.
720 * i386-dis.c: Revert patch of April 4. The output now matches
723 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
725 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
728 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
730 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
732 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
734 * Makefile.in (install): Depend upon installdirs.
735 (installdirs): New target.
737 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
739 From Thomas Graichen <graichen@rzpd.de>:
740 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
741 * configure: Rebuild.
743 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
745 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
746 Delete string{,s}.h support.
748 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
750 * cgen-asm.c (cgen_parse_operand_fn): New global.
751 (cgen_parse_{{,un}signed_integer,address}): Update call to
752 cgen_parse_operand_fn.
753 (cgen_init_parse_operand): New function.
754 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
755 from cgen_asm_init_parse.
756 (m32r_cgen_assemble_insn): New operand `errmsg'.
757 Delete call to as_bad, return error message to caller.
758 (m32r_cgen_asm_hash_keywords): #if 0 out.
760 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
762 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
764 [case 'J']: Fix typo in register name.
766 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
768 * configure.in: Substitute SHLIB_LIBS.
769 * configure: Rebuild.
770 * Makefile.in (SHLIB_LIBS): New variable.
771 ($(SHLIB)): Use $(SHLIB_LIBS).
773 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
775 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
777 * cgen-opc.c (hash_keyword_name): Improve algorithm.
779 * disassemble.c (disassembler): Handle m32r.
781 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
783 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
784 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
785 * Makefile.in (CFILES): Add them.
786 (ALL_MACHINES): Add them.
787 (dependencies): Regenerate.
788 * configure.in (cgen_files): New variable.
789 (bfd_m32r_arch): Add entry.
790 * configure: Regenerate.
792 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
794 * configure.in: Correct file names for bfd_mn10[23]00_arch.
795 * configure: Rebuild.
797 * Makefile.in: Rebuild dependencies.
799 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
801 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
804 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
806 * Branched binutils 2.8.
808 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
810 * m10200-dis.c: Rename from mn10200-dis.c.
811 * m10200-opc.c: Rename from mn10200-opc.c.
812 * m10300-dis.c: Rename from mn10300-dis.c
813 * m10300-opc.c: Rename from mn10300-opc.c.
814 * Makefile.in: Update accordingly.
816 * mips16-opc.c: Add mul and dmul macros.
818 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
820 * makefile.vms: Update CFLAGS, add clean target.
822 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
824 * mips-opc.c: Add "wait". From Ralf Baechle
825 <ralf@gnu.ai.mit.edu>.
827 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
828 * configure, config.in: Rebuild.
829 * sysdep.h: Include <stdlib.h> if it exists.
830 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
832 * Makefile.in: Rebuild dependencies.
834 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
836 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
837 Andrew Bray <andy@madhouse.demon.co.uk>.
839 * mips-opc.c: Add cast when setting mips_opcodes.
841 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
843 * v850-dis.c (disassemble): Fix sign extension problem.
844 * v850-opc.c (extract_d*): Fix sign extension problems to make
845 disassembly calculate branch offsets correctly.
847 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
849 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
851 * mips-opc.c: Add dctr and dctw.
854 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
856 * d30v-dis.c (print_insn): Change the way signed constants
859 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
861 * Makefile.in (BFD_H): New variable.
862 (HFILES): New variable.
863 (CFILES): Add all C files.
864 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
865 Delete old dependencies, and build new ones.
866 * dep-in.sed: New file.
868 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
870 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
872 start-sanitize-coldfire
873 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
875 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
878 end-sanitize-coldfire
879 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
881 * mn10200-opc.c: Change "trap" to "syscall".
882 * mn10300-opc.c: Add new "syscall" instruction.
884 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
886 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
887 mulul insns on the coldfire.
889 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
891 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
892 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
893 (print_insn_little_arm): Likewise.
895 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
897 Based on patches from H.J. Lu <hjl@lucon.org>:
898 * i386-dis.c (fetch_data): Add prototype.
899 * m68k-dis.c (fetch_data): Add prototype.
900 (dummy_print_address): Add prototype. Make static.
901 * ppc-opc.c (valid_bo): Add prototype.
902 * sparc-dis.c (build_hash_table): Add prototype.
903 (is_delayed_branch, compute_arch_mask): Add prototypes.
904 (print_insn_sparc): Make several local variables const.
905 (compare_opcodes): Change arguments to const PTR. Add prototype.
906 * sparc-opc.c (arg): Change name field to be const.
907 (lookup_name, lookup_value): Add prototypes. Change table and
908 name parameters to be const.
909 (sparc_encode_asi): Change name parameter to be const.
910 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
911 (sparc_encode_sparclet_cpreg): Likewise.
912 (sparc_decode_asi): Change return type to be const.
913 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
914 (sparc_decode_sparclet_cpreg): Likewise.
916 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
918 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
919 Solaris doesn't like the combined options, and the -f is
921 (stamp-tshlink, install): Likewise.
923 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
925 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
928 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
930 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
932 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
934 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
937 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
939 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
942 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
944 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
946 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
948 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
951 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
953 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
954 floatformat_to_double to make portable.
955 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
958 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
960 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
961 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
963 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
965 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
966 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
969 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
971 * tic80-opc.c (LSI_SCALED): Renamed from this ...
972 (OFF_SL_BR_SCALED): ... to this, and added the flag
973 TIC80_OPERAND_BASEREL to the flags word.
974 (tic80_opcodes): Replace all occurances of LSI_SCALED with
978 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
980 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
981 Change mips_opcodes from const array to a pointer,
982 and change bfd_mips_num_opcodes from const int to int,
983 so that we can increase the size of the mips opcodes table
987 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
989 * tic80-opc.c (tic80_predefined_symbols): Revert change to
990 store BITNUM values in the table in one's complement form
991 to match behavior when assembler is given a raw numeric
992 value for a BITNUM operand.
993 * tic80-dis.c (print_operand_bitnum): Ditto.
997 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
999 * d30v-opc.c: Removed references to FLAG_X.
1002 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
1004 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
1007 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1009 * Makefile.in: Added d30v object files.
1010 * configure: (bfd_d30v_arch) Rebuilt.
1011 * configure.in: (bfd_d30v_arch) Added new case.
1012 * d30v-dis.c: New file.
1013 * d30v-opc.c: New file.
1014 * disassemble.c (disassembler) Add entry for d30v.
1017 start-sanitize-tic80
1018 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
1020 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
1021 representations for the floating point BITNUM values.
1023 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
1025 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
1026 in the table in one's complement form, as they appear in the
1028 (tic80_symbol_to_value): Use macros to access predefined
1030 (tic80_value_to_symbol): Ditto.
1031 (tic80_next_predefined_symbol): New function.
1032 * tic80-dis.c (print_operand_bitnum): Remove code that did
1033 one's complement for BITNUM values.
1036 start-sanitize-r5900
1037 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
1039 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
1042 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
1044 * makefile.vms: Remove 8 bit characters. Update to latest
1047 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1049 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
1051 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
1053 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
1054 (IMM24_PCREL): Likewise.
1056 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
1058 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
1059 address for an extended PC relative instruction that is not a
1062 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1064 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
1067 start-sanitize-tic80
1068 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
1070 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
1071 (tic80_opcodes): Sort entries so that long immediate forms
1072 come after short immediate forms, making it easier for
1073 assembler to select the right one for a given operand.
1076 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
1078 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
1080 (print_insn_mips16): Likewise.
1082 start-sanitize-r5900
1083 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
1085 * mips-opc.c: add r5900.
1088 start-sanitize-tic80
1089 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
1091 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
1092 a symbol class that restricts translation to just that
1093 class (general register, condition code, etc).
1095 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
1097 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
1098 and REG_DEST_E for register operands that have to be
1099 an even numbered register. Add REG_FPA for operands that
1100 are one of the floating point accumulator registers.
1101 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
1102 (tic80_opcodes): Change entries that need even numbered
1103 register operands to use the new operand table entries.
1104 Add "or" entries that are identical to "or.tt" entries.
1107 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
1109 * mips16-opc.c: Add new cases of exit instruction for
1111 * mips-dis.c (print_mips16_insn_arg): Display floating point
1112 registers in operands of exit instruction. Print `$' before
1113 register names in operands of entry and exit instructions.
1115 start-sanitize-tic80
1116 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
1118 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
1119 pairs for all predefined symbols recognized by the assembler.
1120 Also used by the disassembling routines.
1121 (tic80_symbol_to_value): New function.
1122 (tic80_value_to_symbol): New function.
1123 * tic80-dis.c (print_operand_control_register,
1124 print_operand_condition_code, print_operand_bitnum):
1125 Remove private tables and use tic80_value_to_symbol function.
1128 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1130 * d10v-dis.c (print_operand): Change address printing
1131 to correctly handle PC wrapping. Fixes PR11490.
1133 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
1135 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
1138 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
1140 * mips-dis.c (print_insn_mips16): Set insn_info information.
1141 (print_mips16_insn_arg): Likewise.
1143 * mips-dis.c (print_insn_mips16): Better handling of an extend
1144 opcode followed by an instruction which can not be extended.
1146 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
1148 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
1149 coldfire moveb instruction to not allow an address register as
1150 destination. Although the documentation does not indicate that
1151 this is invalid, experiments uncovered unexpected behavior.
1152 Added a comment explaining the situation. Thanks to Andreas
1153 Schwab for pointing this out to me.
1155 start-sanitize-tic80
1156 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
1158 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
1159 entries are presorted so that entries with the same mnemonic are
1160 adjacent to each other in the table. Sort the entries for each
1161 instruction so that this is true.
1164 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1166 * m68k-dis.c: Include <libiberty.h>.
1167 (print_insn_m68k): Sort the opcode table on the most significant
1168 nibble of the opcode.
1170 start-sanitize-tic80
1171 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
1173 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
1174 "vsub", "vst", "xnor", and "xor" instructions.
1175 (V_a1): Renamed from V_a, msb of accumulator reg number.
1176 (V_a0): Add macro, lsb of accumulator reg number.
1178 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
1180 * tic80-dis.c (print_insn_tic80): Broke excessively long
1181 function up into several smaller ones and arranged for
1182 the instruction printing function to be callable recursively
1183 to print vector instructions that have both a load and a
1184 math instruction packed into a single opcode.
1185 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
1186 to explain why it comes after the other vector opcodes.
1189 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
1191 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
1192 move insns to handle immediate operands.
1194 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1196 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
1197 fix operand mask in the "moveml" entries for the coldfire.
1199 start-sanitize-tic80
1200 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
1202 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
1203 New macros for building vector instruction opcodes.
1204 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
1205 FMT_LI, which were unused. The field is now a flags field.
1206 Remove some opcodes that are possible, but illegal, such
1207 as long immediate instructions with doubles for immediate
1208 values. Add "vadd" and "vld" instructions.
1210 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
1212 * tic80-opc.c (tic80_operands): Reorder some table entries to make
1213 the order more logical. Move the shift alias instructions ("rotl",
1214 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
1215 interspersed with the regular sr.x and sl.x instructions. Add
1216 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
1217 "sub", "subu", "swcr", and "trap".
1219 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
1221 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
1222 (OFF_SL_PC): Renamed from OFF_SL.
1223 (OFF_SS_BR): New operand type for base relative operand.
1224 (OFF_SL_BR): New operand type for base relative operand.
1225 (REG_BASE): New operand type for base register operand.
1226 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
1227 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
1228 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
1230 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
1231 10 char field, padded with spaces on rhs, rather than a string
1232 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
1233 than old TIC80_OPERAND_RELATIVE. Add support for new
1234 TIC80_OPERAND_BASEREL flag bit.
1236 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
1238 * tic80-dis.c (print_insn_tic80): Print floating point operands
1240 * tic80-opc.c (SPFI): Add single precision floating point
1241 immediate operand type.
1242 (ROTATE): Add rotate operand type for shifts.
1243 (ENDMASK): Add for shifts.
1244 (n): Macro for the 'n' bit.
1245 (i): Macro for the 'i' bit.
1246 (PD): Macro for the 'PD' field.
1247 (P2): Macro for the 'P2' field.
1248 (P1): Macro for the 'P1' field.
1249 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
1253 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
1255 * mn10200-dis.c (disassemble): Mask off unwanted bits after
1256 adding in current address for pc-relative operands.
1258 start-sanitize-tic80
1259 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
1261 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
1262 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
1263 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
1264 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
1265 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
1266 REG_BASE_M_SI, REG_BASE_M_LI respectively.
1267 (REG_SCALED, LSI_SCALED): New operand types.
1268 (E): New macro for 'E' bit at bit 27.
1269 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
1270 opcodes, including the various size flavors (b,h,w,d) for
1271 the direct load and store instructions.
1273 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
1275 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
1277 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
1278 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
1279 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
1280 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
1281 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
1282 masks with "MASK_* & ~M_*" to get the M bit reset.
1283 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
1285 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
1287 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
1288 correctly. Add support for printing TIC80_OPERAND_BITNUM and
1289 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
1291 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
1292 CC, SICR, and LICR table entries.
1293 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
1294 "bcnd", and "brcr" opcodes.
1297 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
1299 * ppc-opc.c (powerpc_operands): Make comment match the
1300 actual fields (no shift field).
1301 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
1302 start-sanitize-tic80
1303 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
1304 partial implementation, work in progress.
1305 * tic80-opc.c (tic80_operands): Begin construction operands table.
1306 (tic80_opcodes): Continue populating opcodes table and start
1307 filling in the operand indices.
1308 (tic80_num_opcodes): Add this.
1311 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
1313 * m68k-opc.c: Add #B case for moveq.
1315 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
1317 * mn10300-dis.c (disassemble): Make sure all variables are initialized
1318 before they are used.
1320 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
1322 * v850-opc.c (v850_opcodes): Put curly-braces around operands
1323 for "breakpoint" instruction.
1325 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
1327 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
1328 (dep): Use ALL_CFLAGS rather than CFLAGS.
1330 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1332 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
1335 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
1337 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
1338 start-sanitize-tic80
1339 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
1342 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
1344 * mips16-opc.c: Add "abs".
1346 start-sanitize-tic80
1347 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
1349 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
1350 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
1351 (disassembler): Add bfd_arch_tic80 support to set disassemble
1352 to print_insn_tic80.
1353 * tic80-dis.c (print_insn_tic80): Add stub.
1355 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
1357 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
1358 * configure: Regenerate with autoconf.
1359 * tic80-dis.c: Add file.
1360 * tic80-opc.c: Add file.
1363 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1365 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
1367 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
1369 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
1370 (mn10200_opcodes): Use it for some logicals and btst insns.
1371 Add "break" and "trap" instructions.
1373 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
1375 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
1377 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
1379 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
1380 relative load or add now depends upon whether the instruction is
1383 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
1385 * mn10200-dis.c: Finish writing disassembler.
1386 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
1387 Fix mask for "jmp (an)".
1389 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
1390 handle endianness issues for mn10300.
1392 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
1394 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
1396 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
1397 instruction. Fix opcode field for "movb (imm24),dn".
1399 * mn10200-opc.c (mn10200_operands): Fix insertion position
1402 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
1404 * mn10200-opc.c: Create mn10200 opcode table.
1405 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
1406 but moving along nicely.
1408 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1410 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
1412 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
1414 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
1415 specifiers for fmovem* instructions.
1417 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1419 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
1421 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
1423 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
1426 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1428 * mn10300-opc.c: Add some comments explaining the various
1431 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
1433 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1435 * m68k-dis.c (print_insn_arg): Handle new < and > operand
1438 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1439 operand specifiers in fmovm* instructions.
1441 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
1443 * ppc-opc.c (insert_li): Give an error if the offset has the two
1444 least significant bits set.
1446 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
1448 * mips-dis.c (print_insn_mips16): Separate the instruction from
1449 the arguments with a tab, not a space.
1451 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
1453 * mn10300-dis.c (disasemble): Finish conversion to '$' as
1456 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1459 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
1461 * configure: Rebuild with autoconf 2.12.
1463 Add support for mips16 (16 bit MIPS implementation):
1464 * mips16-opc.c: New file.
1465 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1466 (mips16_reg_names): New static array.
1467 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1468 after seeing a 16 bit symbol.
1469 (print_insn_little_mips): Likewise.
1470 (print_insn_mips16): New static function.
1471 (print_mips16_insn_arg): New static function.
1472 * mips-opc.c: Add jalx instruction.
1473 * Makefile.in (mips16-opc.o): New target.
1474 * configure.in: Use mips16-opc.o for bfd_mips_arch.
1475 * configure: Rebuild.
1477 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
1479 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1480 operand specifiers in *save, *restore and movem* instructions.
1482 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1485 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1486 register operands for immediate arithmetic, not, neg, negx, and
1487 set according to condition instructions.
1489 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1490 specifier of the effective-address operand in immediate forms of
1491 arithmetic instructions. The specifier for the immediate operand
1492 notes how and where the constant will be stored.
1494 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
1496 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1499 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1502 * mn10300-dis.c (disassemble): Prefix registers with '%'.
1504 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
1506 * mn10300-dis.c (disassemble): Handle register lists.
1508 * mn10300-opc.c: Fix handling of register list operand for
1509 "call", "ret", and "rets" instructions.
1511 * mn10300-dis.c (disassemble): Print PC-relative and memory
1512 addresses symbolically if possible.
1513 * mn10300-opc.c: Distinguish between absolute memory addresses,
1514 pc-relative offsets & random immediates.
1516 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1518 (disassemble): Handle SPLIT and EXTENDED operands.
1520 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
1522 * mn10300-dis.c: Rough cut at printing some operands.
1524 * mn10300-dis.c: Start working on disassembler support.
1525 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1527 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1529 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1531 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1533 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1535 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
1537 * mn10300-opc.c (mn10300_opcodes): Demand parens around
1538 register argument is calls and jmp instructions.
1540 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
1542 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1543 getx operand. Fix opcode for mulqu imm,dn.
1545 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
1547 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1548 in MN10300_OPERAND_SPLIT operands for how many bits
1549 appear in the basic insn word. Add IMM32_HIGH24,
1550 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1551 (mn10300_opcodes): Use new operands as needed.
1553 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1554 for bset, bclr, btst instructions.
1555 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1557 * mn10300-opc.c (mn10300_operands): Remove many redundant
1558 operands. Update opcode table as appropriate.
1559 (IMM32): Add MN10300_OPERAND_SPLIT flag.
1560 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1562 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
1564 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1565 operands (for indexed load/stores). Fix bitpos for DI
1566 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1567 few instructions that insert immediates/displacements in the
1568 middle of the instruction. Add IMM8E for 8 bit immediate in
1569 the extended part of an instruction.
1570 (mn10300_operands): Use new opcodes as appropriate.
1572 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1574 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1575 sequential so the assembler never parallelizes it with
1578 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
1580 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1581 a data/address register that appears in register field 0
1582 and register field 1.
1583 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1585 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
1587 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1588 standard disassembly.
1590 * alpha-opc.c (alpha_operands): Rearrange flags slot.
1591 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1592 Recategorize PALcode instructions.
1594 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
1596 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1598 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
1600 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1601 there are no operand types.
1603 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
1605 * v850-opc.c (D9_RELAX): Renamed from D9, all references
1607 (v850_operands): Make sure D22 immediately follows D9_RELAX.
1609 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
1611 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1613 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
1615 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1616 and sst.w instructions.
1618 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1621 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
1623 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1626 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
1628 * ppc-opc.c (PPCPWR2): Define.
1629 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1632 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
1634 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1635 field for movhu instruction.
1637 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1638 cast value to "long" not "signed long" to keep hpux10
1641 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
1643 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1646 * mn10300-opc.c (FMT*): Remove definitions.
1648 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1649 for shift-by-register opcodes.
1651 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1652 into [AD][MN][01] for encoding the position of the register
1655 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1657 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1658 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1660 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1662 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1663 Fix various typos. Add "PAREN" operand.
1664 (MEM, MEM2): Define.
1665 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1666 operands. Fix several typos.
1668 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1671 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1673 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1674 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1676 (mn10300_opcodes): Break opcode format out into its own field.
1677 Update many operand fields to deal with signed vs unsigned
1678 issues. Fix one or two typos in the "mov" instruction
1679 opcode, mask and/or operand fields.
1681 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1683 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1684 m68851 wasn't reset.
1686 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1688 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1689 all opcodes. Very rough cut at operands for all opcodes.
1691 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1694 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1696 * mn10200-opc.c, mn10300-opc.c: New files.
1697 * mn10200-dis.c, mn10300-dis.c: New files.
1698 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1699 * disassemble.c: Break mn10x00 support into 10200 and 10300
1701 * configure.in: Likewise.
1702 * configure: Rebuilt.
1704 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1706 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1708 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1710 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1712 * disassemble (ARCH_mn10x00): Define.
1713 (disassembler): Handle bfd_arch_mn10x00.
1714 * configure.in: Recognize bfd_mn10x00_arch.
1715 * configure: Rebuilt.
1717 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1719 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1720 accordingly. Don't declare functions using op_rtn.
1722 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1724 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1725 params to be more standard.
1726 * (disassemble): Print absolute addresses and symbolic names for
1727 branch and jump targets.
1728 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1730 * (v850_opcodes): Add breakpoint insn.
1732 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1734 * m68k-opc.c: Move the fmovemx data register cases before the
1735 other cases, so that they get recognized before the data register
1736 does gets treated as a degenerate register list.
1738 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1740 * mips-opc.c: Add a case for "div" and "divu" with two registers
1741 and a destination of $0.
1743 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1745 * mips-dis.c (print_insn_arg): Add prototype.
1746 (_print_insn_mips): Ditto.
1748 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1750 * mips-dis.c (print_insn_arg): Print condition code registers as
1753 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1755 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1757 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1759 * v850-dis.c (disassemble): Make static. Provide prototype.
1761 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1763 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1766 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1768 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1769 ']' characters into the output stream.
1770 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1771 Add "memop" field to all opcodes (for the disassembler).
1772 Reorder opcodes so that "nop" comes before "mov" and "jr"
1773 comes before "jarl".
1775 * v850-dis.c (print_insn_v850): Fix typo in last change.
1777 * v850-dis.c (print_insn_v850): Properly handle disassembling
1778 a two byte insn at the end of a memory region when the memory
1779 region's size is only two byte aligned.
1781 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1783 * v850-dis.c (v850_reg_names): Define.
1784 (v850_sreg_names, v850_cc_names): Likewise.
1785 (disassemble): Very rough cut at printing operands (unformatted).
1787 * v850-opc.c (BOP_MASK): Fix.
1788 (v850_opcodes): Fix mask for jarl and jr.
1790 * v850-dis.c: New file. Skeleton for disassembler support.
1791 * Makefile.in Remove v850 references, they're not needed here.
1792 * configure.in: Add v850-dis.o when building v850 toolchains.
1793 * configure: Rebuilt.
1794 * disassemble.c (disassembler): Call v850 disassembler.
1796 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1797 (insert_d8_6, extract_d8_6): New functions.
1798 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1799 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1801 (IF4A, IF4B): Use "D7" instead of "D7S".
1802 (IF4C, IF4D): Use "D8_7" instead of "D8".
1803 (IF4E, IF4F): New. Use "D8_6".
1804 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1805 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1807 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1808 (v850_operands): Change D16 to D16_15, use special insert/extract
1809 routines. New new D16 that uses the generic insert/extract code.
1810 (IF7A, IF7B): Use D16_15.
1811 (IF7C, IF7D): New. Use D16.
1812 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1814 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1815 message. Issue an error if the branch offset is odd.
1817 * v850-opc.c: Add notes about needing special insert/extract
1818 for all the load/store insns, except "ld.b" and "st.b".
1820 * v850-opc.c (insert_d22, extract_d22): New functions.
1821 (v850_operands): Use insert_d22 and extract_d22 for
1823 (insert_d9): Fix range check.
1825 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1827 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1828 and set bits field to D9 and D22 operands.
1830 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1832 * v850-opc.c (v850_operands): Define SR2 operand.
1833 (v850_opcodes): "ldsr" uses R1,SR2.
1835 * v850-opc.c (v850_opcodes): Fix opcode specs for
1836 sld.w, sst.b, sst.h, sst.w, and nop.
1838 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1840 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1841 end of the opcode table.
1843 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1845 * d10v-opc.c (pre_defined_registers): Added register pairs,
1846 "r0-r1", "r2-r3", etc.
1848 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1850 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1851 Create I16U for an unsigned 16bit mmediate operand.
1852 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1854 * v850-opc.c (v850_operands): Define EP operand.
1855 (IF4A, IF4B, IF4C, IF4D): Use EP.
1857 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1858 with immediate operand, "movhi". Tweak "ldsr".
1860 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1861 correct. Get sld.[bhw] and sst.[bhw] closer.
1863 * v850-opc.c (v850_operands): "not" is a two byte insn
1865 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1867 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1869 * v850-opc.c (two): Get order of words correct.
1871 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1873 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1874 register source and destination operands.
1875 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1877 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1878 same thinko in "trap" opcode.
1880 * v850-opc.c (v850_opcodes): Add initializer for size field
1883 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1884 Add D8 for 8-bit unsigned field in short load/store insns.
1885 (IF4A, IF4D): These both need two registers.
1886 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1887 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1888 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1889 for "ldsr" and "stsr".
1890 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1893 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1894 short store word (sst.w).
1896 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1898 * v850-opc.c (v850_operands): Added insert and extract fields,
1899 pointers to functions that handle unusual operand encodings.
1901 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1903 * v850-opc.c (v850_opcodes): Enable "trap".
1905 * v850-opc.c (v850_opcodes): Fix order of displacement
1906 and register for "set1", "clr1", "not1", and "tst1".
1908 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1910 * v850-opc.c (v850_operands): Add "B3" support.
1911 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1914 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1916 * v850-opc.c: Close unterminated comment.
1918 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1920 * v850-opc.c (v850_operands): Add flags field.
1921 (v850_opcodes): add move opcodes.
1923 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1925 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1926 * configure: (bfd_v850v_arch) Add new case.
1927 * configure.in: (bfd_v850_arch) Add new case.
1928 * v850-opc.c: New file.
1930 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1932 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1934 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1936 * d10v-opc.c: Add additional information to the opcode
1937 table to help determinine which instructions can be done
1940 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1942 * mpw-make.sed: Update editing of include pathnames to be
1945 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1947 * arm-opc.h: Added "bx" instruction definition.
1949 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1951 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1953 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1955 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1957 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1959 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1961 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
1963 * makefile.vms: Update for alpha-opc changes.
1965 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
1967 * i386-dis.c (print_insn_i386): Actually return the correct value.
1968 (ONE, OP_ONE): #ifdef out; not used.
1970 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1972 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1973 Changed subi operand type to treat 0 as 16.
1975 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
1977 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
1980 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
1982 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1983 memory transfer instructions. Add new format string entries %h and %s.
1984 * arm-dis.c: (print_insn_arm): Provide decoding of the new
1987 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1989 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1990 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1992 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
1994 * alpha-dis.c (print_insn_alpha_osf): Remove.
1995 (print_insn_alpha_vms): Remove.
1996 (print_insn_alpha): Make globally visible. Chose the register
1997 names based on info->flavour.
1998 * disassemble.c: Always return print_insn_alpha for the alpha.
2000 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2002 * d10v-dis.c (dis_long): Handle unknown opcodes.
2004 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2006 * d10v-opc.c: Changes to support signed and unsigned numbers.
2007 All instructions with the same name that have long and short forms
2008 now end in ".l" or ".s". Divs added.
2009 * d10v-dis.c: Changes to support signed and unsigned numbers.
2011 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2013 * d10v-dis.c: Change all functions to use info->print_address_func.
2015 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2017 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
2018 move ccr/sr insns more strict so that the disassembler only
2019 selects them when the addressing mode is data register.
2021 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2022 * d10v-opc.c (pre_defined_registers): Declare.
2023 * d10v-dis.c (print_operand): Now uses pre_defined_registers
2024 to pick a better name for the registers.
2026 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
2028 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
2029 operands for fexpand and fpmerge. From Christian Kuehnke
2030 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
2032 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
2034 * alpha-dis.c (print_insn_alpha): No longer the user-visible
2035 print routine. Take new regnames and cpumask arguments.
2036 Kill the environment variable nonsense.
2037 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
2038 (print_insn_alpha_vms): New function. Do VMS style regnames.
2039 * disassemble.c (disassembler): Test bfd flavour to pick
2040 between OSF and VMS routines. Default to OSF.
2042 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
2044 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
2045 * configure: Rebuild.
2046 * Makefile.in (install): Use @INSTALL_SHLIB@.
2048 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2050 * configure: (bfd_d10v_arch) Add new case.
2051 * configure.in: (bfd_d10v_arch) Add new case.
2052 * d10v-dis.c: New file.
2053 * d10v-opc.c: New file.
2054 * disassemble.c (disassembler) Add entry for d10v.
2056 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2058 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
2059 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
2061 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
2063 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
2064 distinguish between variants of the instruction set.
2065 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
2066 distinguish between variants of the instruction set.
2068 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
2070 * i386-dis.c (print_insn_i8086): New routine to disassemble using
2071 the 8086 instruction set.
2072 * i386-dis.c: General cleanups. Make most things static. Add
2073 prototypes. Get rid of static variables aflags and dflags. Pass
2074 them as args (to almost everything).
2076 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
2078 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
2080 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
2082 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
2083 if the next arg is marked with SRC_IN_DST. Gross.
2085 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
2086 we're looking for and find EXR.
2088 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
2089 if we're looking for KBIT and we don't find it.
2091 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
2094 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
2095 3bit immediate operands.
2097 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
2099 * Released binutils 2.7.
2101 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
2102 <kkaempf@progis.ac-net.de>.
2104 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
2106 * alpha-opc.c: Correct second case of "mov" to use OPRL.
2108 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
2110 * sparc-dis.c (print_insn_sparclite): New routine to print
2111 sparclite instructions.
2113 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2115 * m68k-opc.c (m68k_opcodes): Add coldfire support.
2117 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
2119 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
2120 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
2121 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
2123 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2125 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
2126 Use autoconf-set values.
2127 (docdir, oldincludedir): Removed.
2128 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
2130 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
2132 * alpha-opc.c: New file.
2133 * alpha-opc.h: Remove.
2134 * alpha-dis.c: Complete rewrite to use new opcode table.
2135 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
2136 * configure: Rebuild with autoconf 2.10.
2137 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
2138 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
2140 (alpha-opc.o): New target.
2142 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
2144 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
2145 Set imm_added_to_rs1 even if the source and destination register
2148 * sparc-opc.c: Add some two operand forms of the wr instruction.
2150 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
2152 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
2155 * disassemble.c (disassembler): Handle H8/S.
2156 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
2158 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
2160 * sparc-opc.c: Add beq/teq as aliases for be/te.
2162 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
2163 <sergei@msil.sps.mot.com>.
2165 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
2167 * makefile.vms: New file.
2169 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
2171 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
2173 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
2176 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
2178 * i386-dis.c (OP_OFF): Call append_prefix.
2180 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2182 * ppc-opc.c (instruction encoding macros): Add explicit casts to
2183 unsigned long to silence a warning from the Solaris PowerPC
2186 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
2188 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
2190 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
2192 * sparc-dis.c (X_IMM,X_SIMM): New macros.
2194 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
2195 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
2196 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
2197 cpush, cpusha, cpull sparclet insns.
2199 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
2201 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
2203 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
2205 * sparc-opc.c: Set F_FBR on floating point branch instructions.
2206 Set F_FLOAT on other floating point instructions.
2208 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2210 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
2212 (powerpc_opcodes): Add 860/821 specific SPRs.
2214 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
2216 * configure.in: Permit --enable-shared to specify a list of
2217 directories. Set and substitute BFD_PICLIST.
2218 * configure: Rebuild.
2219 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
2220 uses. Set to @BFD_PICLIST@.
2222 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
2224 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
2225 not "abs", which may be needed for the absolute in something
2226 like btst #0,@10:8. Print L_3 immediates separately from other
2227 immediates. Change ABSMOV reference to ABS8MEM.
2229 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
2231 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
2232 (current_arch_mask): New static global.
2233 (compute_arch_mask): New static function.
2234 (print_insn_sparc): Delete sparc_v9_p. New static local
2235 current_mach. Resort opcode table if current_mach changes.
2236 Generalize "insn not supported" test.
2237 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
2238 Delete test for v9/!v9.
2239 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
2241 (brfc): Split into CBR and FBR for coprocessor/fp branches.
2242 (brfcx): Renamed to FBRX.
2243 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
2244 coprocessor mnemonics are not supported on the sparclet).
2245 (condf): Renamed to CONDF.
2246 (SLCBCC2): Delete F_ALIAS flag.
2248 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
2250 * sparc-opc.c (sparc_opcodes): rd must be 0 for
2251 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
2253 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
2255 * Makefile.in (config.status): Depend upon BFD VERSION file, so
2256 that the shared library version number is set correctly.
2258 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
2260 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
2261 Miles Bader <miles@gnu.ai.mit.edu>.
2262 * configure: Rebuild.
2264 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
2266 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
2269 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
2271 * configure: Rebuild with autoconf 2.8.
2273 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
2275 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
2276 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
2278 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
2280 * configure.in: Don't set SHLIB or SHLINK to an empty string,
2281 since they appear as targets in Makefile.in.
2282 * configure: Rebuild.
2284 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
2286 * mpw-make.sed: Edit out shared library support bits.
2288 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
2290 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
2291 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
2292 (sparc_opcodes): Add sparclet insns.
2293 (sparclet_cpreg_table): New static local.
2294 (sparc_{encode,decode}_sparclet_cpreg): New functions.
2295 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
2297 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
2299 * i386-dis.c (index16): New static variable.
2300 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
2302 (OP_indirE): Return result of OP_E.
2303 (OP_E): Check for 16 bit addressing mode, and disassemble
2304 correctly. Optimised 32 bit case a little. Don't print
2305 "(base,index,scale)" when sib specifies only an offset.
2307 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
2309 * configure.in: Set and substitute SHLIB_DEP.
2310 * configure: Rebuild.
2311 * Makefile.in (SHLIB_DEP): New variable.
2312 (LIBIBERTY_LISTS, BFD_LIST): New variables.
2313 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
2314 COMMON_SHLIB, add them to piclist with appropriate modifications.
2315 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
2316 here: just use piclist.
2318 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
2320 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
2321 (print_insn_sparc): Rewrite v9/not-v9 tests.
2322 (compare_opcodes): Likewise.
2323 * sparc-opc.c (MASK_<ARCH>): Define.
2324 (v6,v7,v8,sparclite,v9,v9a): Redefine.
2325 (sparclet,v6notv9): Define.
2326 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
2327 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
2329 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
2331 * configure.in: Call AC_PROG_CC before configure.host.
2332 * configure: Rebuild.
2334 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
2336 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
2338 * i386-dis.c (onebyte_has_modrm): New static array.
2339 (twobyte_has_modrm): New static array.
2340 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
2342 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
2344 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
2347 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2349 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
2352 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
2354 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
2355 m68010up, not just m68020up | cpu32.
2357 * Makefile.in (SONAME): New variable.
2358 ($(SHLINK)): Make a link to the transformed name, as well.
2359 (stamp-tshlink): New target.
2360 (install): Skip stamp-tshlink during install.
2362 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
2364 * configure.in: Call AC_ARG_PROGRAM.
2365 * configure: Rebuild.
2366 * Makefile.in (program_transform_name): New variable.
2367 (install): Transform library name before installing it.
2369 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
2371 * i960-dis.c (mem): Add HX dcinva instruction.
2373 Support for building as a shared library, based on patches from
2374 Alan Modra <alan@spri.levels.unisa.edu.au>:
2375 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
2376 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
2377 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
2378 * configure: Rebuild.
2379 * Makefile.in (ALLLIBS): New variable.
2380 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
2381 (COMMON_SHLIB, SHLINK): New variables.
2382 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
2383 (STAGESTUFF): Remove variable.
2384 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
2385 (stamp-piclist, piclist): New targets.
2386 ($(SHLIB), $(SHLINK)): New targets.
2387 ($(OFILES)): Depend upon stamp-picdir.
2388 (disassemble.o): Build twice if PICFLAG is set.
2389 (MOSTLYCLEAN): Add pic/*.o.
2390 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
2391 (distclean): Remove pic and stamp-picdir.
2392 (install): Install shared libraries.
2393 (stamp-picdir): New target.
2395 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
2397 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
2398 Print unknown instruction as "unknown", rather than in hex.
2400 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
2402 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
2404 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
2406 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
2408 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
2410 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
2411 when necessary. From Ulrich Drepper
2412 <drepper@myware.rz.uni-karlsruhe.de>.
2414 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
2416 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
2417 sparc_num_opcodes. Update architecture enum values.
2418 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
2419 (sparc_opcode_lookup_arch): New function.
2420 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
2421 (sparc_opcodes): Add v9a shutdown insn.
2423 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
2425 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
2426 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
2428 (print_insn_sparc64): Deleted.
2429 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
2432 * sparc-opc.c (architecture_pname): Add v9a.
2434 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
2436 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
2437 incorrectly defined as 0x16 when it should be 0x15.
2438 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
2439 (alpha_insn_set): added cvtst and cvttq float ops. Also added
2440 excb (exception barrier) which is defined in the Alpha
2441 Architecture Handbook version 2.
2442 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2443 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
2444 disassembled as or, for example.
2446 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
2448 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2449 (_print_insn_mips): Change i from int to unsigned int.
2451 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
2453 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2454 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
2456 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
2458 * i386-dis.c: Added Pentium Pro instructions.
2460 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2462 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2465 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2467 * sh-opc.h (sh_nibble_type): Added REG_B.
2468 (sh_arg_type): Added A_REG_B.
2469 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2471 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2473 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
2475 * disassemble.c (disassembler): Use new bfd_big_endian macro.
2477 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
2479 * Makefile.in (distclean): Remove stamp-h. From Ronald
2480 F. Guilmette <rfg@monkeys.com>.
2482 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
2484 From David Mosberger-Tang <davidm@azstarnet.com>:
2485 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2488 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2490 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2491 (sh_table): Added many SH3 opcodes.
2492 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2494 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2496 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2497 (subco,subco.): Mark this PPC, not PPCCOM.
2499 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
2501 * configure: Rebuild with autoconf 2.7.
2503 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
2505 * configure: Rebuild with autoconf 2.6.
2507 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
2509 * configure.in: Sort list of architectures. Accept but do nothing
2510 for alliant, convex, pyramid, romp, and tahoe.
2512 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
2514 * a29k-dis.c (print_special): Change num to unsigned int.
2516 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
2518 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2521 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
2523 * configure.in: Call AC_CHECK_PROG to find and cache AR.
2524 * configure: Rebuilt.
2526 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
2528 * configure.in: Add case for bfd_i860_arch.
2529 * configure: Rebuild.
2531 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
2533 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2534 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2535 (NEXTDOUBLE): Likewise.
2536 (print_insn_m68k): Don't match fmoveml if there is more than one
2537 register in the list.
2538 (print_insn_arg): Handle a place of '8' for a type of 'L'.
2540 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
2542 * m68k-opc.c: Use #W rather than #w.
2543 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2545 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
2547 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2548 and likewise for all the dbxx opcodes.
2550 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
2552 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2554 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
2556 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2557 the VR4100 specific instructions to the mips_opcodes structure.
2559 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
2561 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2562 ugly Metrowerks bug in CW6, is fixed in CW7.
2564 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2566 * ppc-opc.c (whole file): Add flags for common/any support.
2568 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
2570 * Makefile.in (BISON): Remove macro.
2571 (FLAGS_TO_PASS): Remove BISON.
2573 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
2575 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2577 * m68k-dis.c (print_insn_m68k): Recognize all two-word
2578 instructions that take no args by looking at the match mask.
2579 (print_insn_arg): Always print "%" before register names.
2580 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2581 [case '_']: Don't print "@#" before address.
2582 [case 'J']: Use "%s" as format string, not register name.
2583 [case 'B']: Treat place == 'C' like 'l' and 'L'.
2585 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
2587 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2590 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
2592 From David Mosberger-Tang <davidm@azstarnet.com>
2594 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2595 (alpha_insn_set): added definitions for VAX floating point
2596 instructions (Unix compilers don't generate these, but handcoded
2597 assembly might still use them).
2599 * alpha-dis.c (print_insn_alpha): added support for disassembling
2600 the miscellaneous instructions in the Alpha instruction set.
2602 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
2604 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2605 no longer create sysdep.h, sed ppc-opc.c to work around a
2606 serious Metrowerks C bug.
2607 * mpw-make.in: Remove.
2608 * mpw-make.sed: New file, used by mpw-configure to edit
2609 Makefile.in into an MPW makefile.
2611 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
2613 * Makefile.in (maintainer-clean): New synonym for realclean.
2615 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
2617 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2618 which use '0', '1', and '2' instead. Specify the proper size for
2619 a pmove immediate operand. Correct the pmovefd patterns to be
2620 moves to a register, not from a register.
2621 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2623 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
2625 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2626 %psr, %wim, %tbr as F_NOTV9.
2628 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
2630 * Makefile.in (Makefile): Just rebuild Makefile when running
2632 (config.h, stamp-h): New targets.
2633 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2634 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2635 rebuilding config.h.
2636 * configure: Rebuild.
2638 * mips-opc.c: Change unaligned loads and stores with "t,A"
2639 operands to use "t,A(b)".
2641 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2643 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2645 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2647 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2648 until 3 instead of until 2.
2650 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2652 * Makefile.in (ALL_CFLAGS): Define.
2653 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2654 (MOSTLYCLEAN): Add config.log.
2655 (distclean): Don't remove config.log.
2656 * configure.in: Substitute HDEFINES.
2657 * configure: Rebuild.
2659 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2661 * sh-opc.h (sh_arg_type): Add F_FR0.
2662 (sh_table, case fmac): Add F_FR0 as first argument.
2664 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2666 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2668 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2670 * sparc-dis.c: Remove all references to NO_V9.
2672 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2674 * aclocal.m4: Just include ../bfd/aclocal.m4.
2675 * configure: Rebuild.
2677 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2679 * sparc-dis.c (X_DISP19): Define.
2680 (print_insn, case 'G'): Use it.
2681 (print_insn, case 'L'): Sign extend displacement.
2683 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2685 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2686 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2687 host_makefile_frag or frags.
2688 * aclocal.m4: New file.
2689 * configure: Rebuild.
2690 * Makefile.in (INSTALL): Set to @INSTALL@.
2691 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2692 (INSTALL_DATA): Set to @INSTALL_DATA@.
2694 (AR_FLAGS): Set to rc rather than qc.
2695 (CC): Define as @CC@.
2696 (CFLAGS): Set to @CFLAGS@.
2697 (@host_makefile_frag@): Remove.
2698 (config.status): Remove dependency upon @frags@.
2700 * configure.in: ../bfd/config.bfd now just sets shell variables.
2701 Use them rather than looking through target Makefile fragments.
2702 * configure: Rebuild.
2704 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2706 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2708 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2710 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2711 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2714 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2715 (lookup_{name,value}): New functions.
2716 (prefetch_table): New static local.
2717 (sparc_{encode,decode}_prefetch): New functions.
2718 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2720 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2722 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2725 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2727 * sh-dis.c: Correct comment on first line of file.
2729 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2731 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2733 * sparc-opc.c (asi, membar): New static locals.
2734 (sparc_{encode,decode}_{asi,membar}): New functions.
2735 (sparc_opcodes, membar insn): Fix.
2736 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2737 Support decoding of membar masks.
2740 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2742 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2744 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2746 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2747 and likewise for the other branches. Add bhs as an alias for bcc,
2748 and likewise for the size variants. Add dbhs as an alias for
2751 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2753 * sh-opc.h (FP sts instructions): Update to match reality.
2755 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2757 * m68k-dis.c: (fpcr_names): Add % before all register names.
2758 (reg_names): Likewise.
2759 (print_insn_arg): Don't explicitly print % before register names.
2760 Add % before register names in static array names. In case 'r',
2761 print data registers as `@(Dn)', not `Dn@'. When printing a
2762 memory address, don't print @# before it.
2763 (print_indexed): Change base_disp and outer_disp from int to
2764 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2765 syntax. Sign extend 8 byte displacement correctly.
2766 (print_base): Print using MIT syntax. Print zpc when appropriate.
2767 Change parameter disp from int to bfd_vma.
2769 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2772 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2774 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2775 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2776 * sh-opc.h (sh_arg_type): Add new operand types.
2777 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2779 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2781 * Makefile.in (distclean): Remove generated file config.h.
2783 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2785 * Makefile.in (distclean): Remove generated file config.h.
2787 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2789 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2791 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2793 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2794 rather than numopcodes. Use m68k_opcodes rather than removed
2795 opcode function. Don't check F_ALIAS.
2796 (print_insn_arg): Change first parameter to be const char *.
2797 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2798 (m68k-opc.o): New target.
2799 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2800 * configure: Rebuild.
2802 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2804 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2805 (opcode_bits, opcode_hash_table): New variables.
2806 (opcodes_initialized): Renamed from opcodes_sorted.
2807 (build_hash_table): New function.
2808 (is_delayed_branch): Use hash table.
2809 (print_insn): Renamed from print_insn_sparc, made static.
2810 Build and use hash table. If !sparc64, ignore sparc64 insns,
2811 and vice-versa if sparc64.
2812 (print_insn_sparc, print_insn_sparc64): New functions.
2813 (compare_opcodes): Move sparc64 opcodes to end.
2814 Print commutative insns with constant second.
2815 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2817 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2819 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2820 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2821 avoids printing a delay slot in a delay slot.
2822 * sh-opc.h (sh_table): Fully bracket last entry.
2824 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2826 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2828 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2830 * configure.in: Get host_makefile_frag from ${srcdir}.
2832 * configure.in: Autoconfiscated. Check for string[s].h. Create
2833 config.h from config.in. Don't set up sysdep.h link.
2834 * sysdep.h: New file.
2835 * configure, config.in: New files, generated from configure.in.
2836 * Makefile.in: Updated to be processed autoconf-style.
2837 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2838 (Makefile): Depend on config.status.
2839 (config.status): New rule.
2840 * configure.bat: Update Makefile substitutions.
2842 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2844 * mips-opc.c (L1): Define.
2845 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2846 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2849 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2851 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2852 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2853 have multiple add units but only a single logical unit.
2855 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2856 shifted by 18, without any insertion or extraction function.
2857 (insert_cr, extract_cr): Remove.
2859 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2861 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2864 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2866 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2867 * sh-opc.h: Add copyright.
2869 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2871 * Makefile.in (crunch-m68k): Delete extra target accidentally
2872 checked in a while ago.
2874 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2876 * sh-opc.h (sh_table): Add SH3 support.
2878 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2880 * sh-opc.h: Added bsrf and braf.
2882 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2884 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2885 bogus [ls]fm{ea,fd} patterns.
2887 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2888 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2889 initialize it from memory. Make function static.
2890 (print_insn_{big,little}_arm): New functions.
2891 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2892 the correct endianness.
2894 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2896 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2899 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2901 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2902 17th, so that it builds again using GCC as the compiler.
2904 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2906 * mips-dis.c (print_insn_little_mips): Cast return value from
2907 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2908 expects an unsigned long, and that might be fewer words of
2909 argument storage (e.g., if bfd_vma is long long on a 32-bit
2911 (print_insn_big_mips): Likewise with bfd_getb32 value.
2912 (_print_insn_mips): Now static.
2914 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2916 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2917 gcc memory hog problem with initializer is fixed.
2919 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2921 Merge in support for Mac MPW as a host.
2922 (Old change descriptions retained for informational value.)
2924 * mpw-config.in (archname): Compute from the config.
2925 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2927 * mpw-config.in (target_arch): Compute from canonical target.
2928 (m68k, mips, powerpc, sparc): Add architectures.
2929 * mpw-make.in (disassemble.c.o): Add.
2930 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2932 * mpw-config.in (BFD_MACHINES): Set to a default value.
2933 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2935 * mpw-make.in (CSEARCH): Add extra-include to search path.
2937 * mpw-config.in (varargs.h): Don't create.
2938 (sysdep.h): Create using forward-include.
2939 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2941 * mpw-config.in: New file, MPW version of configure.in.
2942 * mpw-make.in: New file, MPW version of Makefile.in.
2944 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2946 * alpha-dis.c (print_insn_alpha): Put empty statement after
2949 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2951 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2952 (low_sign_extend): Likewise.
2953 (get_field): Delete unused function.
2954 (set_field, deposit_14, deposit_21): Likewise.
2956 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2958 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2961 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2963 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2965 * alpha-opc.h (OSF_ASMCODE): define
2966 print pal-code names as defined in App C of the
2967 Alpha Architecture Reference Manual
2969 * alpha-dis.c: cleaned up output
2970 print stylized code forms as defined in App A.4.3 of the
2971 Alpha Architecture Reference Manual
2973 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2975 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2977 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2980 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2982 * m68k-dis.c (opcode): New function. Returns address of opcode
2983 table entry given index, even if the opcode table was split to
2984 work around gcc bugs.
2985 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2987 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2988 (reg_names): Now const.
2989 (print_insn_arg): Arrays cacheFieldName and names now const.
2990 (print_indexed): Array scales now const.
2992 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2994 * ppc-opc.c: Sort recently added instructions by minor opcode
2995 number within major opcode number.
2997 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2999 * hppa-dis.c: Include libhppa.h.
3001 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
3003 * mips-opc.c: Change dli to use M_DLI, and add dla.
3005 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3007 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
3009 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
3011 * mips-opc.c: Add r4650 mul instruction.
3013 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
3015 * mips-opc.c: Add uld and usd macros for unaligned double load and
3018 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3020 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
3021 mfdcr, mtdcr, icbt, iccci.
3023 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
3025 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
3026 signed char fields to shorts, more portable.
3028 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
3030 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
3031 char fields as signed chars, since they may have negative values.
3033 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3035 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
3036 (mycroft@netbsd.org).
3038 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
3040 From "Logg, Ed" <elogg@ea.com>:
3041 * ppc-opc.c (extract_bdm): Correct parenthezisation.
3042 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
3045 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
3047 * ppc-opc.c: Changes based on patch from David Edelsohn
3048 <edelsohn@mhpcc.edu>.
3049 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
3052 (insert_tbr): New static function.
3053 (extract_tbr): New static function.
3054 (XFXFXM_MASK, XFXM): Define.
3055 (XSPRBAT_MASK, XSPRG_MASK): Define.
3056 (powerpc_opcodes): Add instructions to access special registers by
3057 name. Add mtcr and mftbu.
3059 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
3061 * mips-opc.c (P3): Define.
3062 (mips_opcodes): Add mad and madu.
3064 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
3066 * configure.in: Add W65 support.
3067 * disassemble.c: Likewise.
3068 * w65-opc.h, w65-dis.c: New files.
3070 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
3072 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
3075 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3077 * mips-opc.c: Add dli as a synonym for li.
3079 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
3081 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
3082 print something for reserved opcode values, even if it won't
3085 * mips-dis.c (_print_insn_mips): When initializing, shift right
3086 and mask, to avoid sign extension problems on the Alpha.
3088 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
3091 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
3093 * sh-opc.h (mov.l gbr): Get direction right.
3094 * sh-dis.c (print_insn_shx): New function.
3095 (print_insn_shl, print_insn_sh): Call print_insn_shx to
3096 print opcodes with right byte order.
3098 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
3100 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
3101 to avoid conflicts with getopt.
3103 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3105 * hppa-dis.c (print_insn_hppa): Read the instruction using
3106 bfd_getb32, so that it works on a little endian or 64 bit host.
3107 Remove unused local variable op.
3109 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3111 * mips-opc.c: Use or instead of addu for pseudo-op move, since
3112 addu does not work correctly if -mips3.
3114 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3116 * a29k-dis.c (print_special): Add special register names defined
3117 on 29030, 29040 and 29050.
3118 (print_insn): Handle new operand type 'I'.
3120 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3122 * Makefile.in (INSTALL): Use top level install.sh script.
3124 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3126 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
3127 that it works on a little endian host.
3129 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3131 * configure.in: Use ${config_shell} when running config.bfd.
3133 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3135 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
3137 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3139 * a29k-dis.c (print_insn): Print the opcode.
3141 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3143 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
3145 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
3147 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
3149 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3151 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
3152 which store a value into memory.
3154 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
3156 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
3157 * arm-dis.c, arm-opc.h: New files.
3159 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
3161 * Makefile.in (ns32k-dis.o): Add dependency.
3162 * ns32k-dis.c (print_insn_arg): Declare initialized local as
3163 string, not as array of chars.
3165 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3167 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
3169 * sparc-opc.c: Added sparclite extended FP operations, and
3170 versions of v9 impdep* instructions permitting specification of
3173 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3175 * i960-dis.c (reg_names): Now const.
3176 (struct sparse_tabent): New type, copied from array type in mem
3178 (ctrl): Local static array ctrl_tab now const.
3179 (cobr): Local static array cobr_tab now const.
3180 (mem): Local variables reg1, reg2, reg3 now point to const. Local
3181 static variable mem_tab no longer explicitly initialized. Changed
3182 mem_init to const array of struct sparse_tabent.
3183 (reg): Local static variable reg_tab no longer explicitly
3184 initialized. Changed reg_init to const array of struct
3186 (ea): Local static array scale_tab now const.
3188 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
3191 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
3193 * configure.bat: the disassember needs to be enabled for
3194 "objdump -d" to work in djgpp.
3196 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3198 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
3199 (invalid_float): Enabled general version, doesn't require running
3200 on ns32k host. Changed to take char* argument, and test for
3201 explicitly specified sizes, instead of using sizeof() on host CPU
3203 (INVALID_FLOAT): Cast first argument.
3204 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
3205 list_P032, list_M032): Now const.
3206 (optlist, list_search): Made appropriate arguments now point to
3208 (print_insn_arg): Changed static array of one-character-string
3209 pointers into a static const array of characters; fixed sprintf
3210 statement accordingly.
3212 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
3214 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
3215 from distribution. A ns32k-dis.c from a previous distribution has
3216 been brought up to date and supports the new interface.
3218 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
3220 * configure.in: add bfd_ns32k_arch target support.
3222 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
3223 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
3225 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
3227 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
3230 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
3232 * h8300-dis.c, mips-dis.c: Don't use true and false.
3234 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
3236 * configure.in: Change --with-targets to --enable-targets.
3238 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3240 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
3241 opcodes to the first instruction with that opcode, to speed
3242 disassembly of large files. From ralphc@pyramid.com (Ralph
3245 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3247 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
3249 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
3251 * configure.bat: update to latest makefile.in
3253 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
3255 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
3256 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
3257 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
3258 slot insn is in a delay slot.
3259 * z8k-opc.h: (resflg): Fix patterns.
3260 * h8500-opc.h Fix CR insn patterns.
3262 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3264 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
3265 "cmpl" before POWER versions, so that gas -many uses them.
3267 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3269 * disassemble.c: New file.
3270 * Makefile.in (OFILES): Add disassemble.o.
3271 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
3272 * configure.in: Define ARCHDEFS in Makefile. Code taken from
3273 binutils/configure.in.
3275 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
3276 opcode being examined.
3278 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3280 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
3281 (insert_ral, insert_ram, insert_ras): New functions.
3282 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
3283 RAS for store with update.
3285 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3287 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
3288 (edelsohn@npac.syr.edu).
3290 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3292 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
3295 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
3297 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
3299 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3301 * ppc-opc.c (powerpc_operands): The signedp field has been
3302 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
3303 instead. Add new operand SISIGNOPT.
3304 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
3305 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
3306 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
3309 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3311 * i386-dis.c (struct private): Renamed to dis_private. `private'
3312 is a reserved word for dynix cc.
3314 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3316 * configure.in: Change error message to refer to bfd/config.bfd
3317 rather than bfd/configure.in.
3319 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
3321 * ppc-opc.c: Define POWER2 as short alias flag.
3322 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
3325 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3327 * i960-dis.c (print_insn_i960): Don't read a second word for
3328 opcodes 0, 1, 2 and 3.
3330 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3332 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
3334 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3336 * m68881-ext.c: Removed; no longer used.
3337 * Makefile.in: Changed accordingly.
3339 * m68k-dis.c (ext_format_68881): Don't declare.
3340 (print_insn_m68k): If an instruction uses place 'i', it uses at
3341 least four fixed bytes.
3342 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
3343 extended float, convert to double using floatformat_to_double, not
3344 ieee_extended_to_double, and fetch the data before converting it.
3346 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3348 * mips-opc.c: It's sqrt.s, not sqrt.w. From
3349 davidj@ICSI.Berkeley.EDU (David Johnson).
3351 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3353 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
3354 PowerPC uses bdnz[l][a].
3356 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3358 * dis-buf.c, i386-dis.c: Include sysdep.h.
3360 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3362 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
3364 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
3365 by Motorola PowerPC 601 with PPC_OPCODE_601.
3366 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
3367 Disassemble Motorola PowerPC 601 instructions as well as normal
3368 PowerPC instructions.
3370 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
3372 * i960-dis.c (reg, mem): Just use a static array instead of
3375 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3377 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
3378 condition name index if this is for a negated condition.
3380 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
3381 Floating point format for 'H' operand is backwards from normal
3382 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
3383 operands (fmpyadd and fmpysub), handle bizarre register
3384 translation correctly for single precision format.
3386 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
3387 or 'I' operands if the next format specifier is 'M' (fcmp
3388 condition completer).
3390 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3392 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
3393 single number giving a bitmask for the MB and ME fields of an M
3394 form instruction. Change NB to accept 32, and turn it into 0;
3395 also turn 0 into 32 when disassembling. Seperated SH from NB.
3396 (insert_mbe, extract_mbe): New functions.
3397 (insert_nb, extract_nb): New functions.
3398 (SC_MASK): Mask out SA and LK bits.
3399 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
3400 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
3401 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
3402 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
3403 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
3404 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
3405 (powerpc_macros): Define table of macro definitions.
3406 (powerpc_num_macros): Define.
3408 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
3409 if PPC_OPERAND_NEXT is set.
3411 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3413 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
3414 char. Retrieve contents using bfd_getl32 instead of shifting.
3416 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3418 * ppc-opc.c: New file. Opcode table for PowerPC, including
3419 opcodes for POWER (RS/6000).
3420 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
3421 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
3422 (CFILES): Add ppc-dis.c.
3423 (ppc-dis.o, ppc-opc.o): New targets.
3424 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
3426 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3428 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
3429 No space before 'u', 'f', or 'N'.
3431 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
3433 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
3434 farther than we should.
3436 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3438 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3440 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3442 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3444 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3445 needs it, to prevent reading past the end of a section.
3447 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3449 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3450 Removed t,A case for la; always use t,A(b) case.
3452 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3454 From Ted Lemen <mellon@pepper.ncd.com>
3455 * mips-dis.c (print_insn_arg): Handle 'k'.
3456 * mips-opc.c: Make cache use k, not t.
3458 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3460 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
3461 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3462 FLOAT_FORMAT_CODE to put out floating point register names.
3464 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3466 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3468 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3470 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3472 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3474 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3475 larger than 32. Moved dsxx32 variants first for disassembler.
3477 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3479 * z8kgen.c, z8k-opc.h: Add full lda information.
3481 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
3483 * hppa-dis.c (print_insn_hppa): Do not emit a space after
3484 movb instructions. Any necessary space will be emitted by
3485 the code to handle nullification completers.
3487 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3489 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3491 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3493 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
3494 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3496 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3498 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3500 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3502 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3503 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3505 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3507 * m88k-dis.c (m88kdis): comment change. Remove space after
3509 (printop): handle new arg types DEC and XREG for m88110.
3511 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3513 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3514 type for absolute branch addresses. Delete special
3515 "ble" and "be" code in 'W' operand code.
3517 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3519 * mips-opc.c: Set hazard information correctly for branch
3520 likely instructions.
3522 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3524 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3525 info->fprintf_func for printing and info->print_address_func for
3528 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3530 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3532 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3534 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3535 Corrected second case of "b" for disassembler.
3537 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3539 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3540 to BFD swapping routines to correspond to BFD name changes.
3542 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3544 * mips-opc.c: Change div machine instruction to be z,s,t rather
3545 than s,t. Change div macro to be d,v,t rather than d,s,t.
3546 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3547 rem and remu which generates only the corresponding div
3548 instruction. This is for compatibility with the MIPS assembler,
3549 which only generates the simple machine instruction when an
3550 explicit destination of $0 is used.
3551 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3553 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3555 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3556 WR_31 hazard for bal, bgezal, bltzal.
3558 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3560 * hppa-dis.c (print_insn_hppa): Use print function
3561 from within the disassemble_info, not fprintf_filtered.
3563 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3565 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3566 Law, law@cs.utah.edu.)
3568 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3570 * mips-opc.c ("absu"): Removed.
3573 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3575 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3576 Changed hazard information to distinguish between memory load
3577 delays and coprocessor load delays.
3579 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3581 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3583 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3585 * configure.in: Don't pass cpu to config.bfd.
3587 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3589 * m88k-dis.c (m88kdis): Make class unsigned.
3591 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3593 * alpha-dis.c (print_insn_alpha): One branch format case was
3594 missing the instruction name.
3596 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3598 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3599 Add the arch-specific auxiliary files.
3600 (OFILES): Remove the arch-specific auxiliary files
3601 and use BFD_MACHINES instead of DIS_LIBS.
3602 * configure.in: Set BFD_MACHINES based on --with-targets option.
3604 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3606 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3609 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3611 * sparc-opc.c: Change CONST to const to deal with gcc
3612 -Dconst=__const -traditional.
3614 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3616 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3617 coprocessor instructions out of #if 0, and made them use new
3620 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3622 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3624 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3626 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3627 instruction, for use by the disassembler.
3629 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3630 hand-coded sign extensions that depended on 32-bit host ints.
3631 FIXME, we still depend on big-endian host bitfield ordering.
3632 (sparc_print_insn): Set the insn_info_valid field, and the
3633 other fields that describe the instruction being printed.
3635 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3637 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3638 `jmp' instead of just one of them.
3640 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3642 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3643 (fput_fp_reg_r): Renamed from fput_reg_r.
3644 (fput_fp_reg): New function.
3645 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3647 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3649 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3651 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3653 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3655 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3656 don't output a space.
3658 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3660 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3662 * mips-opc.c: New file, containing opcode table from
3663 ../include/opcode/mips.h.
3664 * Makefile.in: Add it.
3666 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3668 * m88k-dis.c: New file, moved in from gdb and changed to use the
3669 new dis-asm.h disassembler interface.
3670 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3671 (m88k-dis.o): New target.
3673 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3675 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3676 argument string const char * to correspond to opcode/mips.h.
3678 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3680 * mips-dis.c: Updated to account for name changes in new version
3682 * Makefile.in: Added header file dependencies.
3684 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3686 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3688 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3690 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3691 extend, rather than shifts.
3693 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3695 * Makefile.in: Undo 15 June change.
3697 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3699 * m68k-dis.c (print_insn_arg): Change return value to byte count
3701 * m68k-dis.c: Re-write to detect invalid operands before
3702 printing anything, so we can handle this the same way we
3703 handle invalid opcodes.
3705 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3707 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3709 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3711 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3714 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3716 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3718 * configure.in: Do make sysdep.h link.
3719 * Makefile.in: Search ../include. Don't search ../bfd.
3721 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3723 Changes from Jeff Law, law@cs.utah.edu:
3724 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3725 Do not print a space before the completers specified by
3728 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3730 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3731 defined, since gdb has been fixed.
3733 Changes from Jeff Law, law@cs.utah.edu:
3734 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3735 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3736 be a *disassemble_info, not a *FILE.
3737 * hppa-dis.c: Support 'd', '!', and 'a'.
3738 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3739 * hppa-dis.c: Delete cases which are no longer needed.
3741 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3743 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3745 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3747 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3750 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3752 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3753 * configure.in: No longer need to configure to get sysdep.h.
3755 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3757 * Patches from Jeffrey Law <law@cs.utah.edu>.
3758 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3759 templates for 1.1 FP computational instructions.
3761 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3763 * h8500-dis.c (print_insn_h8500): Address argument is type
3765 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3768 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3769 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3771 * sparc-dis.c (compare_opcodes): Move static declaration to
3774 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3776 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3777 instruction, remove unimp hack from 'l' argument.
3779 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3781 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3784 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3786 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3787 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3790 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3792 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3793 arrays of string pointers to 2-d arrays of chars, to save
3796 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3798 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3799 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3801 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3803 * hppa-dis.c: New file from Utah, adapted to new disassembler
3805 * Makefile.in: Include it.
3807 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3809 * sh-dis.c, sh-opc.h: New files.
3811 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3813 * alpha-dis.c, alpha-opc.h: New files.
3815 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3817 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3820 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3822 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3824 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3826 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3829 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3831 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3832 and double percent signs a few places.
3834 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3836 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3837 Use info->print_address_func not print_address.
3839 * dis-buf.c (generic_print_address): New function.
3841 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3843 * Makefile.in: Add sparc-dis.c.
3844 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3846 Add `add' instruction to the set that get checked
3847 for a preceding `sethi' in order to print an absolute address.
3848 * (print_insn): Disassembly prefers real instructions.
3849 (is_delayed_branch): Speed up.
3850 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3851 Still missing some float ops, and needs testing.
3852 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3853 F_ALIAS. Use printf, not fprintf, when not passing a file
3855 (compare_opcodes): Check that identical instructions have
3856 identical opcodes, complain otherwise.
3859 * Include reg_names.
3861 Use dis-asm.h/read_memory_func interface.
3863 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3865 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3866 deliberately return non-zero to setjmp from longjmp. Otherwise
3867 this code fails to compile.
3869 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3871 * m68k-dis.c: Fix prototype for fetch_arg().
3873 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3875 * dis-buf.c: New file, for new read_memory_func interface.
3876 Makefile.in (OFILES): Include it.
3877 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3878 Use new read_memory_func interface.
3880 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3882 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3883 * h8500-opc.h: Fix couple of opcodes.
3885 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3887 * Makefile.in: add dvi & installcheck targets
3889 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3891 * Makefile.in: Update for h8500-dis.c.
3893 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3895 * h8500-dis.c, h8500-opc.h: New files
3897 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3899 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3900 ../include/dis-asm.h.
3901 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3902 and ../gdb/m68k-pinsn.c).
3903 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3904 and ../gdb/i386-pinsn.c).
3905 * m68881-ext.c: New file. Moved definition of
3906 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3907 * Makefile.in: Adjust for new files.
3908 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3909 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3910 can be dis-assembled.
3912 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3914 * mips-dis.c (print_insn_arg): Now returns void.
3916 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3918 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3919 files that use the macros.
3921 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3923 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3924 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3925 (CFILES): Added mips-dis.c.
3927 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3929 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3930 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3932 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3934 * Makefile.in: Improve *clean rules.
3935 * configure.in: Allow a default host.
3937 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3939 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3940 files include other sysdep files
3942 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3944 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3946 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3948 * configure.in: For host support, use ../bfd/configure.host
3949 so it stays in sync with the ../bfd/hosts database.
3951 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3953 * configure.in: use cpu-vendor-os triple instead of nested cases
3955 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3957 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3958 *always* the wrong one.
3960 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3962 * z8kgen.c: added copyright info
3964 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3966 * z8k-dis.c (unparse_instr): prettier tabs
3967 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3969 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3971 * configure.in: Add ncr* configuration.
3972 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3973 picayune ANSI compilers happy.
3975 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3977 * configure.in (i386): Make i386 and i486 synonymous for now.
3978 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3980 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3982 * Makefile.in (install): Fix typo.
3984 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3986 * Makefile.in (make): Remove obsolete crud.
3987 (sparc-opc.o): Avoid Sun Make VPATH bug.
3989 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3991 * Makefile.in: since there are no SUBDIRS, remove rule and
3992 references of subdir_do.
3994 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3996 * Makefile.in (install): Get the library name right here too.
3997 Don't install bfd.h, since it's unrelated to this library. No
3998 subdirs to recurse into, either.
3999 (CFILES): The source file has a .c suffix, not .o.
4001 * sparc-opc.c: New file, moved from BFD.
4002 * Makefile.in (OFILES): Build it.
4004 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
4006 * z8k-dis.c: fixed forward refferences of some declarations.
4008 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
4010 * Makefile.in: get the name of the library right
4012 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4014 * z8k-dis.c: knows how to disassemble z8k stuff
4015 * z8k-opc.h: new file full of z8000 opcodes
4019 version-control: never