1 Sun Sep 19 10:41:27 1999 Jeffrey A Law (law@cygnus.com)
3 * hppa-dis.c (print_insn_hppa): Handle 'fe' and 'cJ'.
5 * hppa-dis.c (print_insn_hppa): Handle '#', 'd', and 'cq'.
7 * hppa-dis.c (print_insn_hppa): Handle 'm', 'h', '='.
9 * hppa-dis.c (print_insn_hppa): Handle 'X' operand.
11 * hppa-dis.c (print_insn_hppa): Handle 'B' operand.
13 * hppa-dis.c (print_insn_hppa): Handle 'M' and 'L' operands.
15 * hppa-dis.c (print_insn_hppa): Handle 'l' operand.
17 * hppa-dis.c (print_insn_hppa): Handle 'g' operand.
19 Sat Sep 18 11:36:12 1999 Jeffrey A Law (law@cygnus.com)
21 * hppa-dis.c (print_insn_hppa): Output a space after 'X' completer.
23 * hppa-dis.c: (print_insn_hppa): Do output a space before a 'v'
26 * hppa-dis.c: (print_insn_hppa): Handle 'fX'.
28 * hppa-dis.c: (print_insn_hppa): Add missing break after
31 * hppa-dis.c: Finish constifying various completers, register
34 1999-09-14 Michael Meissner <meissner@cygnus.com>
36 * configure.in (Canonicalization of target names): Remove adding
37 ${CONFIG_SHELL} in front of $ac_config_sub, since autoconfig 2.14
38 generates $ac_config_sub with a ${CONFIG_SHELL} already.
39 * configure: Regenerate.
41 Tue Sep 7 13:50:32 1999 Jeffrey A Law (law@cygnus.com)
43 * hppa-dis.c (print_insn_hppa): Escape '%' in output strings.
45 * hppa-dis.c (print_insn_hppa): Handle 'Z' argument.
47 1999-09-07 Nick Clifton <nickc@cygnus.com>
49 * sh-opc.h: Add mulu.w and muls.w patterns. These are the correct
50 names for the mulu and muls patterns.
52 1999-09-04 Steve Chamberlain <sac@pobox.com>
56 * disassemble.c (disassembler): Handle bfd_arch_pj.
57 * configure.in: Handle bfd_pj_arch.
58 * Makefile.am: Rebuild dependencies.
59 (CFILES): Add pj-dis.c and pj-opc.c.
60 (ALL_MACHINES): Add pj-dis.lo and pj-opc.lo.
61 * configure, Makefile.in: Rebuild.
63 1999-09-04 H.J. Lu <hjl@gnu.org>
65 * i386-dis.c (print_insn_i386): Set bytes_per_line to 7.
67 Mon Aug 30 18:56:14 1999 Richard Henderson <rth@cygnus.com>
69 * alpha-opc.c (fetch, fetch_m, ecb, wh64): RA must be R31.
71 1999-08-04 Doug Evans <devans@casey.cygnus.com>
73 * fr30-asm.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
74 * m32r-asm.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
75 * m32r-opinst.c: Rebuild.
77 Sat Aug 28 00:27:24 1999 Jerry Quinn <jquinn@nortelnetworks.com>
79 * hppa-dis.c (print_insn_hppa): Replace 'f' by 'v'. Prefix float
82 * hppa-dis.c (print_insn_hppa): Add args q, %, !, and |.
84 * hppa-dis.c (MASK_10, read_write_names, add_compl_names,
85 extract_10U_store): New.
86 (print_insn_hppa): Add new completers.
88 * hppa-dis.c (signed_unsigned_names,mix_half_names,
89 saturation_names): New.
90 (print_insn_hppa): Add completer codes 'a', 'ch', 'cH', 'cS', and 'c*'.
92 * hppa-dis.c (print_insn_hppa): Place completers behind prefix 'c'.
94 * hppa-dis.c (print_insn_hppa): Add cases for '.', '~'. '$'. and '!'
96 * hppa-dis.c (print_insn_hppa): Look at next arg instead of bits
97 to decide to print a space.
99 1999-08-21 Alan Modra <alan@spri.levels.unisa.edu.au>
101 * i386-dis.c: Add AMD athlon instruction support.
103 1999-08-10 Ian Lance Taylor <ian@zembu.com>
105 From Wally Iimura <iimura@microunity.com>:
106 * dis-buf.c (buffer_read_memory): Rewrite expression to avoid
107 overflow at end of address space.
108 (generic_print_address): Use sprintf_vma.
110 1999-08-08 Ian Lance Taylor <ian@zembu.com>
112 * Makefile.am: Rename .dep* files to DEP*. Change DEP variable to
113 MKDEP. Rebuild dependencies.
114 * Makefile.in: Rebuild.
116 Fri Aug 6 09:46:35 1999 Jerry Quinn <jquinn@nortelnetworks.com>
118 * hppa-dis.c (compare_cond_64_names, cmpib_cond_64_names,
119 add_cond_64_names, wide_add_cond_names, logical_cond_64_names,
120 unit_cond_64_names, shift_cond_64_names, bb_cond_64_names): New.
121 (print_insn_hppa): Add 64 bit condition completers.
123 Thu Aug 5 16:59:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
125 * hppa-dis.c (print_insn_hppa): Change condition args to use
128 Wed Jul 28 04:33:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
130 * hppa-dis.c (print_insn_hppa): Remove unnecessary test in 'E'
133 1999-07-21 Ian Lance Taylor <ian@zembu.com>
136 * configure.bat: Remove; obsolete.
138 1999-07-11 Ian Lance Taylor <ian@zembu.com>
140 * dis-buf.c: Add ATTRIBUTE_UNUSED as appropriate.
141 (generic_strcat_address): Add cast to avoid warning.
142 * i386-dis.c: Initialize all structure fields to avoid warnings.
143 Add ATTRIBUTE_UNUSED as appropriate.
145 1999-07-08 Jakub Jelinek <jj@ultra.linux.cz>
147 * sparc-dis.c (print_insn_sparc): Differentiate between
148 addition and oring when guessing symbol for comment.
150 1999-07-05 Nick Clifton <nickc@cygnus.com>
152 * arm-dis.c (print_insn_arm): Display hex equivalent of rotated
155 1999-06-23 Alan Modra <alan@spri.levels.unisa.edu.au>
157 * i386-dis.c: Mention intel mode specials in macro char comment.
159 1999-06-21 Ian Lance Taylor <ian@zembu.com>
161 * alpha-dis.c: Don't include <stdlib.h>.
162 * arm-dis.c: Include "sysdep.h".
163 * tic30-dis.c: Don't include <stdlib.h> or <string.h>. Include
165 * Makefile.am: Rebuild dependencies.
166 * Makefile.in: Rebuild.
168 1999-06-16 Nick Clifton <nickc@cygnus.com>
170 * arm-dis.c (print_insn_arm): Add detection of IMB and IMBRange
173 1999-06-14 Nick Clifton <nickc@cygnus.com> & Drew Mosley <dmoseley@cygnus.com>
175 * arm-dis.c (arm_regnames): Turn into a pointer to a register
177 (arm_regnames_standard): New variable: Array of ARM register
178 names according to ARM instruction set nomenclature.
179 (arm_regnames_apcs): New variable: Array of ARM register names
180 according to ARM Procedure Call Standard.
181 (arm_regnames_raw): New variable: Array of ARM register names
182 using just 'r' and the register number.
183 (arm_toggle_regnames): New function: Toggle the chosen register set
185 (parse_disassembler_options): New function: Parse any target
186 disassembler command line options.
187 (print_insn_big_arm): Call parse_disassembler_options if any
189 (print_insn_little_arm): Call parse_disassembler_options if any
192 1999-06-13 Ian Lance Taylor <ian@zembu.com>
194 * i386-dis.c (FWAIT_OPCODE): Define.
195 (used_prefixes): New static variable.
196 (fetch_data): Don't print an error message if we have already
197 fetched some bytes successfully.
198 (ckprefix): Clear used_prefixes. Use FWAIT_OPCODE, not 0x9b.
199 (prefix_name): New static function.
200 (print_insn_i386): If setjmp fails, indicating a data error, but
201 we have managed to fetch some bytes, print the first one as a
202 prefix or a .byte pseudo-op. If fwait is followed by a non
203 floating point instruction, print the first prefix. Set
204 used_prefixes when prefixes are used. If any prefixes were not
205 used after disassembling the instruction, print the first prefix
206 instead of printing the instruction.
207 (putop): Set used_prefixes when prefixes are used.
208 (append_seg, OP_E, OP_G, OP_REG, OP_I, OP_sI, OP_J): Likewise.
209 (OP_DIR, OP_SIMD_Suffix): Likewise.
211 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
213 * sparc-opc.c: Fix up set, setsw, setuw operand kinds.
214 Support signx %reg, clruw %reg.
216 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
218 * sparc-opc.c: Add aliases Solaris as supports.
220 Mon Jun 7 12:04:52 1999 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
222 * Makefile.am (CFILES): Add arc-{dis,opc}.c and v850-{dis,opc}.c.
223 * Makefile.in: Regenerated.
225 1999-06-03 Philip Blundell <philb@gnu.org>
227 * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
228 when target is PC-relative.
230 1999-05-28 Linus Nordberg <linus.nordberg@canit.se>
232 * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC. Add MACM/MSACM. Add
235 * m68k-dis.c (fetch_arg): Add places `n', `o'.
237 * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
238 Add mcf5206e to appropriate instructions.
239 Add alias for MAC, MSAC.
241 * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
244 * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
245 macw, remsl, remul for mcf5307. Change mcf5200 --> mcf.
247 * m68k-dis.c: Add format `u' and places `h', `m', `M'.
249 1999-05-18 Alan Modra <alan@spri.levels.unisa.edu.au>
251 * i386-dis.c (Ed): Define.
252 (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
254 (OP_rm): Rename to OP_Rd.
257 (putop): Add const to template and p.
258 (print_insn_x86): Delete.
259 (print_insn_i386): Merge old function print_insn_x86. Add const
261 (struct dis386): Add const to name.
262 (dis386_att, dis386_intel): Add const.
263 (dis386_twobyte_att, dis386_twobyte_intel): Add const.
264 (names32, names16, names8, names_seg, index16): Add const.
265 (grps, prefix_user_table, float_reg): Add const.
266 (float_mem_att, float_mem_intel): Add const.
267 (oappend): Add const to s.
268 (OP_REG): Add const to s.
269 (ptr_reg): Add const to s.
270 (dofloat): Add const to dp.
271 (OP_C): Don't skip modrm, it's now done in OP_Rd.
274 (OP_Rd): Check for valid mod. Call Op_E to print.
275 (OP_E): Handle d_mode arg. Check for bad sfence,lea,lds etc.
276 (OP_MS): Check for valid mod. Call Op_EM to print.
277 (OP_3DNowSuffix): Set obufp and use oappend rather than
278 strcat. Call BadOp() for errors.
279 (OP_SIMD_Suffix): Likewise.
280 (BadOp): New function.
282 1999-05-12 Alan Modra <alan@spri.levels.unisa.edu.au>
284 * i386-dis.c (dis386_intel): Remove macro chars, except for
285 jEcxz. Change cWtR and cRtd to cW and cR.
286 (dis386_twobyte_intel): Remove macro chars here too.
287 (putop): Handle R and W macros for intel mode.
289 * i386-dis.c (SIMD_Fixup): New function.
290 (dis386_twobyte_att): Use it on movlps and movhps, and change
291 Ev to EX on these insns. Change movmskps Ev, XM to Gv, EX.
292 (dis386_twobyte_intel): Same here.
294 * i386-dis.c (Av): Remove.
298 (OP_SIMD_Suffix): New function.
299 (OP_DIR): Remove dead code.
300 (eAX_reg..eDI_reg): Renumber.
301 (onebyte_has_modrm): Table numbering comments.
302 (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
303 (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
304 checks. Print error on invalid dp->bytemode2. Remove simd_cmp,
305 and handle SIMD cmp insns in OP_SIMD_Suffix.
306 (info->bytes_per_line): Bump from 5 to 6.
308 (OP_E): Use INTERNAL_DISASSEMBLER_ERROR. Handle sfence.
309 (OP_3DNowSuffix): Ensure mnemonic index unsigned.
311 PIII SIMD support from Doug Ledford <dledford@redhat.com>
312 * i386-dis.c (XM, EX, None): Define.
313 (OP_XMM, OP_EX, OP_None): New functions.
314 (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
315 (GRP14): Rename to GRPAMD.
316 (GRP*): Add USE_GROUPS flag.
318 (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
319 (twobyte_has_modrm): Add SIMD entries.
320 (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
321 (grps): Add SIMD insns.
322 (print_insn_x86): New vars uses_f3_prefix and simd_cmp. Don't
323 oappend repz if uses_f3_prefix. Add code to handle new groups for
326 From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
327 * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
328 operand from Av to Jv.
330 1999-05-07 Nick Clifton <nickc@cygnus.com>
332 * mcore-dis.c (print_insn_mcore): Use .short to display
333 unidentified instructions, not .word.
335 1999-04-26 Tom Tromey <tromey@cygnus.com>
337 * aclocal.m4, configure: Updated for new version of libtool.
339 1999-04-14 Doug Evans <devans@casey.cygnus.com>
341 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
342 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
344 Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
346 * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
349 1999-04-10 Doug Evans <devans@casey.cygnus.com>
351 * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
352 * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
354 1999-04-06 Ian Lance Taylor <ian@zembu.com>
356 * opintl.h (LC_MESSAGES): Never define.
358 1999-04-04 Ian Lance Taylor <ian@zembu.com>
360 * i386-dis.c (intel_syntax, open_char, close_char): Make static.
361 (separator_char, scale_char): Likewise.
362 (print_insn_x86): Likewise.
363 (print_insn_i386): Likewise. Add declaration.
365 1999-03-26 Doug Evans <devans@casey.cygnus.com>
367 * fr30-dis.c: Rebuild.
368 * m32r-dis.c: Rebuild.
370 1999-03-23 Ian Lance Taylor <ian@zembu.com>
372 * m68k-opc.c: Change compare instructions to use "@s" rather than
373 ";s" when used with an immediate operand.
375 1999-03-22 Doug Evans <devans@casey.cygnus.com>
377 * cgen-opc.c (cgen_set_cpu): Delete.
378 (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
379 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
381 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
383 * po/opcodes.pot: Rebuild.
385 1999-03-16 Martin Hunt <hunt@cygnus.com>
387 * d30v-opc.c (mvtsys): Remove FLAG_LKR.
389 1999-03-11 Doug Evans <devans@casey.cygnus.com>
391 * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
392 (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
393 (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
394 * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
395 * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
396 * m32r-opinst.c: Rebuild.
398 1999-02-25 Doug Evans <devans@casey.cygnus.com>
400 * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
401 (cgen_hw_lookup_by_num): Rewrite.
402 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
403 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
404 * m32r-opinst.c: Rebuild.
406 Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
408 * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
409 (insert_jhint): Fix insertion mask.
410 * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
412 1999-02-10 Doug Evans <devans@casey.cygnus.com>
414 * Makefile.in: Rebuild.
416 1999-02-09 Doug Evans <devans@casey.cygnus.com>
418 * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
419 * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
420 * Makefile.am: Remove references to them.
421 (HFILES): Add fr30-desc.h,m32r-desc.h.
422 (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
424 (ALL_MACHINES): Update.
425 * configure.in: Redo handling of cgen_files.
426 (bfd_i960_arch): Delete i960c-*.lo files.
427 * configure: Regenerate.
428 * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
429 (hash_insn_array): Rewrite.
430 * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
431 (hash_insn_array): Rewrite.
432 * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
433 (cgen_lookup_insn,cgen_get_insn_operands): Define here.
434 (cgen_lookup_get_insn_operands): Ditto.
435 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
436 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
437 * po/POTFILES.in: Rebuild.
438 * po/opcodes.pot: Rebuild.
440 Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
442 * Makefile.am: Rebuild dependencies.
443 (HFILES): Add fr30-opc.h.
444 (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
445 * Makefile.in: Rebuild.
447 * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
448 Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
450 * acconfig.h: Remove.
451 * configure: Rebuild with current autoconf/automake.
452 * aclocal.m4: Likewise.
453 * config.in: Likewise.
454 * Makefile.in: Likewise.
456 Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
458 * m68k-opc.c: Correct move (not movew) to status word on 5200.
460 Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
462 * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
463 * i386-dis.c (x_mode): Define.
467 (dis386_twobyte): Remove.
468 (dis386_twobyte_att): New.
469 (dis386_twobyte_intel): New.
470 (print_insn_x86): Use new arrays.
472 (float_mem_intel): New.
473 (float_mem_att): New.
474 (dofloat): Use new float_mem arrays.
475 (print_insn_i386_att): New.
476 (print_insn_i386_intel): New.
477 (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
478 (putop): Handle intel syntax.
479 (OP_indirE): Handle intel syntax.
480 (OP_E): Handle intel syntax.
481 (OP_I): Handle intel syntax.
482 (OP_sI): Handle intel syntax.
483 (OP_OFF): Handle intel syntax.
487 1999-01-27 Doug Evans <devans@casey.cygnus.com>
489 * fr30-opc.h,fr30-opc.c: Rebuild.
490 * i960c-opc.h,i960c-opc.c: Rebuild.
491 * m32r-opc.c: Rebuild.
493 Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
495 * hppa-dis.c: revert HP merge changes until HP gives us
498 1999-01-19 Nick Clifton <nickc@cygnus.com>
500 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
501 offsets as well as symbloic address.
503 Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
505 * hppa-dis.c: fix comments and some indentation.
507 1999-01-12 Doug Evans <devans@casey.cygnus.com>
509 * fr30-opc.c,i960c-opc.c: Regenerate.
511 1999-01-11 Doug Evans <devans@casey.cygnus.com>
513 * fr30-opc.c: Regenerate.
515 1999-01-06 Doug Evans <devans@casey.cygnus.com>
517 * m32r-dis.c: Regenerate.
519 1999-01-05 Doug Evans <devans@casey.cygnus.com>
521 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
522 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
523 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
525 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
527 * configure.in: Require autoconf 2.12.1 or higher.
529 1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
531 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
533 Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
535 * fr30-opc.c: Regenerated.
537 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
539 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
541 1998-12-15 Dave Brolley <brolley@cygnus.com>
543 * fr30-opc.c,fr30-opc.h: Regenerated.
545 1998-12-14 Dave Brolley <brolley@cygnus.com>
547 * fr30-opc.c,fr30-opc.h: Regenerated.
549 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
551 * fr30-opc.c,fr30-opc.h: Regenerated.
553 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
555 * m32r-opc.c: Regenerate.
557 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
559 * dis-buf.c (generic_strcat_address): reformat to GNU coding
560 conventions. change sprintf call to an sprintf_vma call.
562 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
564 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
566 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
568 The following changes were made by
569 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
570 David Taylor <taylor@texas.cygnus.com>, and
571 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
572 merge in changes by HP; HP did not create ChangeLog entries.
574 * dis-buf.c (generic_strcat_address): new function.
576 * hppa-dis.c: Changes to improve hppa disassembly.
577 Changed formatting in : reg_names, fp_reg_names,control_reg,
578 New variables : sign_extension_names, deposit_names, conversion_names
579 float_test_names, compare_cond_names_double, add_cond_names_double,
580 logical_cond_names_double, unit_cond_names_double,
581 branch_push_pop_names, saturation_names, shift_names, mix_names,
582 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
583 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
584 (fput_const): renamed as fput_hex_const
586 - use the macros fputs_filtered and
587 fput_decimal_const whenever possible; calls to sign_extend require
588 2 params -- add a missing second param of 0.
589 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
590 architecture version number of current machine. HP folks are
591 trying to handle situation where the target program was compiled
592 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
594 - added new cases : 'g', 'B', 'm'
595 - added cases specifically for PA 2.0
596 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
597 - calls to fput_const become calls to fput_hex_const
599 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
601 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
602 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
603 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
604 * Makefile.in: Rebuilt.
605 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
607 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
608 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
610 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
612 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
614 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
616 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
618 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
619 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
621 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
623 * fr30-opc.c: Regenerate.
625 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
627 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
629 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
631 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
633 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
635 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
637 1998-11-30 Doug Evans <devans@casey.cygnus.com>
639 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
640 CGEN_INSN_BASE_VALUE.
641 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
642 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
644 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
646 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
648 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
650 * fr30-asm.c,fr30-dis.c: Regenerated.
652 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
654 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
656 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
658 * fr30-opc.c: Regenerated.
660 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
662 * fr30-opc.c: Regenerated.
663 * fr30-opc.h: Regenerated.
664 * fr30-dis.c: Regenerated.
665 * fr30-asm.c: Regenerated.
667 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
669 * mips-opc.c (sync.p,sync.l): Swap insn values.
671 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
673 * fr30-opc.c: Regenerate.
675 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
677 * fr30-opc.c: Regenerated.
678 * fr30-opc.h: Regenerated.
680 1998-11-18 Doug Evans <devans@casey.cygnus.com>
682 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
683 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
685 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
687 * fr30-opc.c: Regenerated.
689 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
691 * fr30-opc.c: Regenerated.
692 * fr30-opc.h: Regenerated.
693 * fr30-dis.c: Regenerated.
694 * fr30-asm.c: Regenerated.
696 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
698 * po/opcodes.pot: Regenerated.
699 * fr30-opc.c: Regenerated.
700 * fr30-opc.h: Regenerated.
701 * fr30-dis.c: Regenerated.
702 * fr30-asm.c: Regenerated.
704 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
706 * disassemble.c (disassembler): Add support for FR30 target.
708 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
710 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
711 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
713 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
715 * po/opcodes.pot: Regenerate.
716 * po/POTFILES.in: Regenerate.
717 * fr30-opc.c: Regenerate.
718 * fr30-opc.h: Regenerate.
720 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
722 * m32r-asm.c: Regenerate.
724 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
726 * configure.in: Added case for bfd_fr30_arch.
727 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
728 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
729 (CLEANFILES): Added stamp-fr30.
731 * fr30-asm.c: New file.
732 * fr30-dis.c: New file.
733 * fr30-opc.c: New file.
734 * fr30-opc.h: New file.
735 * po/POTFILES.in: Regenerated
736 * po/opcodes.pot: Regenerated
738 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
740 * configure.in: detect cygwin* instead of cygwin32*
741 * configure: regenerate
743 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
745 * mips-opc.c (IS_M): Added.
747 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
749 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
751 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
753 * m32r-opc.h,m32r-opc.c: Regenerate.
755 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
757 * i386-dis.c (OP_3DNowSuffix): New static function.
760 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
761 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
762 (insn_codep): New static variable.
763 (print_insn_x86): Init insn_codep after prefixes.
764 (grps): Add GRP14 entries for prefetch, prefetchw.
767 From Jeff B Epler <jepler@usgs.gov>
768 * i386-dis.c (Suffix3DNow): New table.
770 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
772 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
774 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
776 * d10v-dis.c (print_operand): If num is nonzero, then
777 add OPERAND_ACC1, not OPERAND_ACC0.
779 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
781 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
784 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
786 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
789 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
791 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
793 1998-09-09 Michael Meissner <meissner@cygnus.com>
795 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
798 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
800 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
802 (print_insn_little_arm): Detect Thumb symbols in elf object
805 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
807 * alpha-dis.c (print_insn_alpha): Use the machine type to
808 decide which PALcode set to include.
810 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
812 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
814 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
816 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
817 MSUB and MSUBS instructions.
819 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
821 * ppc-opc.c (powerpc_operands): Omit parens around additions in
824 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
826 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
827 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
828 +, -, and d for ColdFire.
830 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
831 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
832 (extract_mbe): Likewise.
834 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
836 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
838 * m10300-opc.c: First cut at UDF instructions.
840 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
842 * m32r-opc.c: Regenerate (remove semantic descriptions).
844 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
846 * arm-dis.c (print_insn_big_arm): Fix indentation.
847 (print_insn_little_arm): Likewise.
849 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
851 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
853 (print_insn_little_arm): Likewise.
855 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
857 Move all global state data into opcode table struct, and treat
858 opcode table as something that is "opened/closed".
859 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
860 (cgen_asm_init): Delete.
861 (cgen_set_parse_operand_fn): New function.
862 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
863 (cgen_dis_init): Delete.
864 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
865 (cgen_current_{opcode_table_mach,endian}): Delete.
866 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
868 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
870 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
873 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
875 * m10300-opc.c: Add entries for "no_match_operands" field in
878 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
880 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
882 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
884 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
886 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
888 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
890 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
892 (OP_J): Remove unnecessary subtraction when 16-bit displacement
893 will be masked later.
895 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
897 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
899 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
901 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
903 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
905 * m10300-dis.c: Only recognize instructions from the currently
907 * m10300-opc.c: Add field indicating the particular variant of
908 the mn10300 each instruction is available on.
910 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
912 * configure.in: For bfd_vax_arch, build vax-dis.lo.
913 * Makefile.am: Rebuild dependencies.
914 (CFILES): Add vax-dis.c.
915 (ALL_MACHINES): Add vax-dis.lo.
916 * aclocal.m4: Rebuild with current libtool.
917 * configure, Makefile.in: Rebuild.
919 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
921 * vax-dis.c: New file, from work by Pauline Middelink
922 <middelin@polyware.iaf.nl>.
923 * disassemble.c (ARCH_vax): Define if ARCH_all.
924 (disassembler): Add case for ARCH_vax.
925 * makefile.vms: Support compilation on vms/vax.
927 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
929 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
930 related to sign extension and the size of ints.
932 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
934 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
935 instructions. Support (sp) addressing mode by expanding it into
938 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
940 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
942 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
944 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
946 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
948 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
951 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
953 * mips-dis.c (print_insn_little_mips): Previously, instruction
954 printing references the symbol table to determine whether the
955 instruction resides in a block regular instructions or mips16
956 instructions. However, when the disassembler gets used in other
957 environments where the symbol table is not present, we no longer
958 rely in the symbol table, rather, use the low bit of the
959 instructions address to guess. There should be no change for usage
960 of the disassembler in host based programs, gdb, objdump.
961 (print_insn_big_mips): ditto.
962 (print_insn_mips): ditto
964 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
966 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
968 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
970 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
972 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
974 * i386-dis.c (index16): Add '%' to register names. Use ','
977 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
979 * i386-dis.c: Don't print opcode suffix when we can figure out the
980 size (and gas can!) by register operands, or from the default
982 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
984 (dis386, dis386_twobyte, grps): Use new suffix macros.
985 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
986 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
987 order of cmps operands to agree with Intel docs. Correct operand
988 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
989 agree with Intel docs.
990 (print_insn_x86): Print orphan fwait before other prefixes.
991 Return correct byte count for orphan fwait with prefixes. Don't
992 print `bound' operands in reverse order.
993 (ckprefix): Stop accumulating prefixes if we get fwait.
994 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
996 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
998 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
999 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
1001 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1003 Fix problems when bfd_vma is wider than long.
1004 * i386-dis.c: Make op_address and start_pc unsigned.
1005 (set_op): Make parameter unsigned.
1006 (print_insn_x86): Cast to bfd_vma when passing a value to
1008 * ns32k-dis.c (CORE_ADDR): Don't define.
1009 (print_insn_ns32k): Change type of addr to bfd_vma. Use
1010 bfd_scan_vma to read back address.
1011 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
1013 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
1014 (NEXTULONG): New definition.
1015 (print_insn_m68k): Avoid overflow when computing third argument of
1017 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
1018 Use disp instead of val to store offset values.
1019 (print_indexed): Use base_disp instead of word to store base
1020 displacement, to avoid overflow.
1021 * m10300-dis.c (disassemble): Cast value to long when computing
1022 pc-relative address, to get correct sign extension.
1024 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
1026 * m32r-opc.c: Regenerate.
1028 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
1030 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
1031 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
1033 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
1035 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
1037 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1039 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
1041 (OP_DSreg): Rename from OP_DSSI.
1042 (OP_ESreg): Rename from OP_ESDI.
1043 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
1045 (append_seg): Rename from append_prefix.
1046 (ptr_reg): New function.
1047 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
1049 (PREFIX_ADDR): Rename from PREFIX_ADR.
1050 (float_reg): Add non-broken opcodes for people who don't want
1053 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1055 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
1058 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
1060 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
1062 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
1064 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
1065 0; produce error message for shifts of size 32 (or 64 for 64-bit
1066 shifts), because the hardware doesn't support them.
1068 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
1070 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
1071 LONG_2, LONG_2b formats to use this new operand.
1073 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
1075 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
1077 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
1079 * sparc-dis.c (print_insn_sparc): big endian instruction / little
1080 endian data support.
1082 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
1084 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
1085 and SHORT_B3b formats to use Rb instead of Ra.
1087 Add FLAG_MUL16 to MUL2XH opcode.
1089 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
1090 to existing 1.1.1 parallelisation prohibition procedure.
1092 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
1094 * m32r-asm.c,m32r-dis.c: Regenerate.
1096 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
1098 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
1099 with a shift count of 0.
1101 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
1103 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
1104 (cgen_hw_lookup_by_num): New function.
1106 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
1108 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
1110 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
1112 * sparc-dis.c (print_insn_sparc): Always fetch instructions
1113 as big-endian on SPARClite.
1115 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
1117 * d30v-opc.c (pre_defined_register): Remove alias for r0.
1119 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
1121 * po/Make-in (install-info): New target.
1123 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
1125 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
1126 * configure: Rebuild.
1128 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
1130 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
1131 variety of ISA2 instructions to set bottom ten bits of trap code.
1133 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
1135 * Makefile.am (config.status): Add explicit target so that
1136 config.status depends upon bfd/configure.in.
1137 * Makefile.in: Rebuild.
1139 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1141 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
1142 instructions to set bottom ten bits of break code.
1143 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
1144 for above optional argument.
1146 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
1148 * makefile.vms: Run dec c with /nodebug.
1150 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
1152 * Makefile.in: Rebuilt.
1153 * Makefile.am: Regenerated dependencies with mkdep.
1155 * opintl.h (_): Define as dgettext.
1157 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
1159 * cgen-asm.c: Internationalised.
1160 * m32r-asm.c: Internationalised.
1161 * m32r-dis.c: Internationalised.
1162 * m32r-opc.c: Internationalised.
1164 * aclocal.m4: Regenerated.
1165 * configure: Regenerated.
1166 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1167 * Makefile.in: Rebuild.
1168 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1169 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1171 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
1173 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
1175 * aclocal.m4, configure: Rebuild with current tools.
1177 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
1179 * opintl.h: New file - contains internationalisation macros used
1180 by source files in this directory.
1181 * po/: New subdirectory - contains internationalisation files.
1182 * po/Make-in: New file - Makefile constructor.
1183 * po/POTFILES.in: New file - list of files in opcodes directory
1184 that should be scan for internationalisation macros.
1185 * po/opcodes.pot: New file - list of internationisation strings
1186 found in files mentioned in po/POTFILES.in.
1187 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
1188 entry. Add intl directory to include paths.
1189 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1190 HAVE_STRCPY, HAVE_LC_MESSAGES
1191 * configure.in: Add rule to build Makefile in po subdirectory.
1192 * Makefile.in: Rebuilt.
1193 * aclocal.m4: Rebuilt.
1194 * config.in: Rebuilt.
1195 * configure: Rebuilt.
1196 * alpha-opc.c: Internationalised.
1197 * arc-dis.c: Internationalised.
1198 * arc-opc.c: Internationalised.
1199 * arm-dis.c: Internationalised.
1200 * cgen-asm.c: Internationalised.
1201 * d30v-dis.c: Internationalised.
1202 * dis-buf.c: Internationalised.
1203 * h8300-dis.c: Internationalised.
1204 * h8500-dis.c: Internationalised.
1205 * i386-dis.c: Internationalised.
1206 * m10200-dis.c: Internationalised.
1207 * m10300-dis.c: Internationalised.
1208 * m68k-dis.c: Internationalised.
1209 * m88k-dis.c: Internationalised.
1210 * mips-dis.c: Internationalised.
1211 * ns32k-dis.c: Internationalised.
1212 * opintl.h: Internationalised.
1213 * ppc-opc.c: Internationalised.
1214 * sparc-dis.c: Internationalised.
1215 * v850-dis.c: Internationalised.
1216 * v850-opc.c: Internationalised.
1218 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1220 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1221 (asm_hash_table_entries): New variable.
1222 (cgen_asm_init): Free asm_hash_table_entries.
1223 (hash_insn_array,hash_insn_list): New functions.
1224 (build_asm_hash_table): Use them. Hash macro insns as well.
1225 (cgen_asm_lookup_insn): Update.
1226 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1227 (dis_hash_table_entries): New variable.
1228 (cgen_dis_init): Free dis_hash_table_entries.
1229 (hash_insn_array,hash_insn_list): New functions.
1230 (build_dis_hash_table): Use them. Hash macro insns as well.
1231 (cgen_dis_lookup_insn): Update.
1232 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1233 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1234 (cgen_macro_insn_count): New function.
1235 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1237 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1239 * i386-dis.c (OP_DSSI): Print segment override.
1241 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1243 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1246 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1248 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1249 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1250 * configure.in: Define and substitute WIN32LDFLAGS and
1252 * aclocal.m4: Rebuild with new libtool.
1253 * configure, Makefile.in: Rebuild.
1255 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1257 * m32r-opc.c: Regenerate.
1259 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1261 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1262 before trying to copy it.
1263 * Makefile.in: Rebuild.
1265 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1267 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1269 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1271 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1272 from an arbitrary valid buffer instead of fetching them on demand
1274 (invalid_float): use bit_extract_simple() instead of bit_extract().
1276 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1278 From H.J. Lu <hjl@gnu.org>:
1279 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1282 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1284 * Branched binutils 2.9.
1286 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1288 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1289 disassembling last 4 bytes of a section.
1291 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1293 Fix some gcc -Wall warnings:
1294 * arc-dis.c (print_insn): Add casts to avoid warnings.
1295 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1296 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1297 * m10200-dis.c (disassemble): Likewise.
1298 * m10300-dis.c (disassemble): Likewise.
1299 * ns32k-dis.c (print_insn_ns32k): Likewise.
1300 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1301 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1302 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1303 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1304 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1305 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1306 * tic80-dis.c (print_one_instruction): Likewise.
1307 * w65-dis.c (print_operand): Likewise.
1308 * z8k-dis.c (fetch_data): Likewise.
1309 * a29k-dis.c: Add return type for find_byte_func_type.
1310 * arc-opc.c: Include <stdio.h>. Remove declarations of
1311 insert_multshift and extract_multshift.
1312 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1314 (extract_value): Fully parenthesize expression.
1315 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1316 * h8500-opc.h (h8500_table): Fully bracket initializer.
1317 * w65-opc.h (optable): Likewise.
1318 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1319 * i386-dis.c (OP_E): Initialize local variables.
1320 * m10200-dis.c (print_insn_mn10200): Likewise.
1321 * mips-dis.c (print_insn_mips16): Likewise.
1322 * sh-dis.c (print_insn_shx): Likewise.
1323 * v850-dis.c (print_insn_v850): Likewise.
1324 * ns32k-dis.c (print_insn_arg): Declare.
1325 (get_displacement, invalid_float): Declare.
1326 (list_search, sign_extend, flip_bytes): Declare return type.
1327 (get_displacement): Likewise.
1328 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1330 (print_insn_ns32k): Make i unsigned.
1331 (invalid_float): Make static. Declare type of val.
1332 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1333 on each for iteration.
1334 * tic30-dis.c (get_indirect_operand): Likewise.
1335 * z8k-dis.c (print_insn_z8001): Declare return type.
1336 (print_insn_z8002): Likewise.
1337 (unparse_instr): Fix sprintf format strings.
1339 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1341 * mips-opc.c: Add "sync.l" and "sync.p".
1343 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1345 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1346 default m68k variant to recognize.
1348 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1349 (ctrl, cobr, mem, ea): Likewise.
1350 (print_addr): Likewise. Remove cast.
1351 (ea): Cast argument of print_addr to bfd_vma.
1353 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1355 (cgen_parse_unsigned_integer): Likewise.
1356 (cgen_parse_address): Likewise.
1358 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1360 * i960-dis.c (ctrl): Add full braces to structure initialization.
1361 (cobr, mem, reg): Likewise.
1362 (ea): Correct parenthesization in expression.
1364 * cgen-asm.c: Include <ctype.h>.
1365 (build_asm_hash_table): Remove unused local variable i.
1366 (cgen_parse_keyword): Add casts to avoid warnings.
1368 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1369 symbol. Fix indentation.
1370 (print_insn_little_arm): Likewise.
1372 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1374 * configure.in: Use AM_DISABLE_SHARED.
1375 * aclocal.m4, configure: Rebuild with libtool 1.2.
1377 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1379 These patches are courtesy of Jonathan Walton and Tony Thompson
1380 (athompso@cambridge.arm.com).
1382 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1385 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1386 both the offset and the label closest to the destination.
1388 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1390 * m32r-opc.h: Regenerate.
1392 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1394 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1396 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1398 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1399 assume that info->symbols is non-empty.
1401 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1403 * alpha-opc.c (cvtqs) There is no such thing.
1404 (cvttq): Missing most of the /*d variants.
1406 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1408 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1409 delayed branches or jumps.
1411 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1413 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1415 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1416 * tic30-dis.c (print_branch): Likewise.
1418 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1420 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1421 saved_symbol code as it is no longer needed.
1423 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1425 * cgen-asm.c: Include symcat.h.
1426 * cgen-dis.c,cgen-opc.c: Ditto.
1427 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1429 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1431 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1433 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1435 * m32r-opc.[ch]: Regenerate.
1437 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1439 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1440 arguments. Don't perform validation here.
1441 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1443 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1445 * m32r-opc.c: Regenerate.
1447 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1449 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1450 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1452 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1454 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1456 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1458 * configure.in: Get the version number from BFD.
1459 * configure: Rebuild.
1461 From H.J. Lu <hjl@gnu.org>:
1462 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1463 * Makefile.in: Rebuild.
1465 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1467 * m32r-opc.c: Regenerate.
1468 * m32r-opc.h: Regenerate.
1470 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1472 * m32r-opc.c: Regenerate.
1474 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1476 Fix rac to accept only a0:
1477 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1478 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1479 Introduce OPERAND_GPR.
1480 * d10v-dis.c (print_operand): Likewise.
1482 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1484 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1485 (cgen_hw_lookup): Make result const.
1486 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1488 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1490 * configure, aclocal.m4: Rebuild with new libtool.
1492 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1494 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1495 instructions use a PC relative branch, not absolute.
1497 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1499 * configure.in: Set libtool_enable_shared rather than
1500 libtool_shared. Remove diversion hack.
1501 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1503 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1505 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1506 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1508 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1510 * tic30-dis.c: New file.
1511 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1512 * configure.in: Handle bfd_tic30_arch.
1513 * Makefile.am: Rebuild dependencies.
1514 (CFILES): Add tic30-dis.c
1515 (ALL_MACHINES): Add tic30-dis.lo.
1516 * configure, Makefile.in: Rebuild.
1518 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1520 * m32r-opc.h (HAVE_CPU_M32R): Define.
1522 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1524 * v850-opc.c (insertion routines): If both alignment and size is
1525 wrong then report this.
1527 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1529 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1530 Only recognize instructions for the current target_processor.
1532 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1534 * d10v-dis.c (PC_MASK): Correct value.
1535 (print_operand): If there's a reloc, don't calculate the
1536 address because they could be in different sections.
1538 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1540 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1541 instruction after the 4650's "mul" instruction; nobody's using the
1542 4010 these days. If object files someday indicate which processor
1543 variant they're intended for, we can do a better job at this.
1545 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1547 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1548 table provided entry size. Use CGEN_INSN_MNEMONIC.
1549 (cgen_parse_keyword): Rewrite.
1550 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1551 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1552 * cgen-opc.c: Clean up pass over `struct foo' usage.
1553 (cgen_keyword_lookup_value): Handle "" entry.
1554 (cgen_keyword_add): Likewise.
1556 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1558 * mips-opc.c: Add FP_D to s.d instruction flags.
1560 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1562 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1564 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1566 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1567 PC relative offset forms before the 15 bit forms. An assembler command
1568 line option now chooses the default.
1570 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1572 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1573 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1575 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1577 * configure: Only build libopcodes shared if --enable-shared's value
1578 was `yes', or was set to `*opcodes*'.
1579 * aclocal.m4: Likewise.
1580 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1581 original source of this bit of code. It's not clear what the best fix
1584 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1586 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1587 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1588 offset forms before the 15 bit forms, to default to the long forms.
1590 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1592 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1594 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1596 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1597 symbol if none is present.
1598 (print_insn_big_arm): Prevent examination of stored symbol if
1601 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1603 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1605 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1607 * disassemble.c: Remove disasm_symaddr() function.
1609 * arm-dis.c: Use info->symbol instead of info->flags to determine
1610 if disassmbly should be in Thumb or Arm mode.
1612 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1614 * arm-dis.c: Add support for disassembling Thumb opcodes.
1615 (print_insn_thumb): New function.
1617 * disassemble.c (disasm_symaddr): New function.
1619 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1620 (thumb_opcodes): Table of Thumb opcodes.
1622 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1624 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1626 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1627 and 'v' as operand types.
1629 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1631 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1632 <olivier.carmona@di.epfl.ch>.
1633 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1634 which has a two word opcode with a one word argument.
1636 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1638 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1639 unsigned, not signed.
1640 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1642 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1644 * d10v-dis.c (print_operand):
1645 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1647 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1649 * d10v-opc.c (OPERAND_FLAG): Split into:
1650 (OPERAND_FFLAG, OPERAND_CFLAG) .
1654 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1656 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1657 field for all INSN_MACRO's.
1658 * mips16-opc.c: same
1660 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1662 * mips-opc.c (sync,cache): These are 3900 insns.
1664 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1666 sh-opc.h (sh_table): Remove ftst/nan.
1668 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1670 * mips-opc.c (ffc, ffs): Fix mask.
1672 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1674 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1677 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1679 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1680 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1682 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1684 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1685 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1687 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1689 * v850-dis.c (disassemble): Replace // with /* ... */
1691 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1693 * sparc-opc.c: Add wr & rd for v9a asr's.
1694 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1695 (v9a_asr_reg_names): New variable.
1696 Patch from David Miller <davem@vger.rutgers.edu>.
1698 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1700 * sparc-opc.c (v9notv9a): New insn type.
1701 (IMPDEP): Move to the end to not conflict with edge8 et al.
1702 Patch from David Miller <davem@vger.rutgers.edu>.
1704 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1706 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1708 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1710 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1712 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1714 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1715 of disassemble_info structure to determine if an overlay address
1716 has a matching symbol in low memory.
1718 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1719 new symbol_at_address_func field in disassemble_info structure.
1721 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1723 * v850-opc.c (extract_d22): Use signed arithmatic.
1725 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1727 * mips-opc.c: Three op mult is not an ISA insn.
1729 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1731 * mips-opc.c: Fix formatting.
1733 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1735 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1736 than assuming that char is signed. Explicitly sign extend 16 bit
1737 values, rather than assuming that short is 16 bits.
1738 (OP_sI, OP_J, OP_DIR): Likewise.
1740 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1742 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1745 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1747 * v850-opc.c: Fix typo in comment.
1749 * v850-dis.c (disassemble): Add test of processor type when
1750 determining opcodes.
1752 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1754 * configure.in: Use a diversion to set enable_shared before the
1755 arguments are parsed.
1756 * configure: Rebuild.
1758 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1760 * m68k-opc.c (TBL1): Use ! rather than `.
1761 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1763 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1765 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1767 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1769 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1772 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1773 * aclocal.m4: Rebuild with new libtool.
1774 * configure: Rebuild.
1776 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1778 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1780 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1782 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1784 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1786 * v850-opc.c (v850_opcodes): Further rearrangements.
1788 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1790 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1792 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1794 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1797 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1799 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1801 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1803 * v850-opc.c: Initialise processors field of v850_opcode structure.
1805 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1807 Merge changes from Martin Hunt:
1809 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1811 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1812 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1813 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1815 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1817 * d30v-dis.c (print_insn): First operand of d*i (delayed
1818 branch) instructions is relative.
1820 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1821 (d30v_operand_table): Add IMM6S3 type.
1822 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1824 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1825 and cmp instructions.
1827 * d30v-opc.c: Correct entries for repeat*, and sat*.
1828 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1829 types. Correct several formats.
1831 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1833 * d30v-opc.c (pre_defined_registers): Change control registers.
1835 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1836 SHORT_C2. Manual was incorrect.
1838 * d30v-dis.c (lookup_opcode): Return value now indicates
1839 if an opcode has a short and a long form. Used for deciding
1840 to append a ".s" or ".l".
1841 (print_insn): Append a ".s" to an instruction if it is
1842 the short form and ".l" if it is a long form. Do not append
1843 anything if the instruction has only one possible size.
1845 * d30v-opc.c: Change mulx2h to require an even register.
1846 New form: SHORT_A2; a SHORT_A form that needs an even
1847 register as the first operand.
1849 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1850 instruction was not being disassembled if there were an odd
1851 number of instructions.
1853 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1855 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1857 * v850-dis.c (disassemble): Improved display of register lists.
1859 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1861 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1862 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1863 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1864 fandnot1s, fandnot2s.
1866 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1868 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1870 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1872 * cgen-asm.c (cgen_parse_address): New argument resultp.
1873 All callers updated.
1874 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1876 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1878 * mn10200-dis.c (disassemble): PC relative instructions are
1879 relative to the next instruction, not the current instruction.
1881 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1883 * v850-dis.c (disassemble): Only signed extend values that are not
1884 returned by extract functions.
1885 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1887 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1889 * v850-opc.c: Update comments. Remove use of
1890 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1892 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1894 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1896 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1898 * configure: Rebuilt with latest devo autoconf for NT support.
1900 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1902 * v850-dis.c (disassemble): Use curly brace syntax for register
1905 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1906 where r0 is being used as a destination register.
1908 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1910 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1912 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1914 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1916 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1918 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1919 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1922 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1924 * configure (cgen_files): Add support for v850e target.
1925 * configure.in (cgen_files): Add support for v850e target.
1927 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1929 * configure (cgen_files): Add support for v850ea target.
1930 * configure.in (cgen_files): Add support for v850ea target.
1932 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1934 * configure.in (bfd_arc_arch): Add.
1935 * configure: Rebuild.
1936 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1937 * Makefile.in: Rebuild.
1938 * arc-dis.c, arc-opc.c: New files.
1939 * disassemble.c (ARCH_all): Define ARCH_arc.
1940 (disassembler): Add ARC support.
1942 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1944 * v850-dis.c (disassemble): Add support for v850EA instructions.
1946 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1947 (v850_opcodes): Add v850EA instructions.
1949 * v850-dis.c (disassemble): Add support for v850E instructions.
1951 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1952 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1953 insert_spe, extract_spe): New Functions.
1954 (v850_opcodes): Add v850E instructions.
1956 * v850-opc.c: Reorganised and re-layed out to improve readability
1959 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1961 * configure: Rebuild with autoconf 2.12.1.
1963 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1965 * aclocal.m4, configure: Rebuild with new automake patches.
1967 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1969 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1970 * acinclude.m4: Just include acinclude.m4 from BFD.
1971 * aclocal.m4, configure: Rebuild.
1973 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1975 * Makefile.am: New file, based on old Makefile.in.
1976 * acconfig.h: New file.
1977 * acinclude.m4: New file.
1978 * stamp-h.in: New file.
1979 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1980 Removed shared library handling; now handled by libtool. Replace
1981 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1982 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1983 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1984 handling in AC_OUTPUT.
1985 * dep-in.sed: Change .o to .lo.
1986 * Makefile.in: Now built with automake.
1987 * aclocal.m4: Now built with aclocal.
1988 * config.in, configure: Rebuild.
1990 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1992 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1994 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1996 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1998 * sparc-dis.c (sorted_opcodes): New static local.
1999 (struct opcode_hash): `opcode' is pointer to const element.
2000 (build_hash): First arg is now table of sorted pointers.
2001 (print_insn_sparc): Sort opcodes by sorting table of pointers.
2002 (compare_opcodes): Update.
2004 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
2006 * cgen-opc.c: #include <ctype.h>.
2007 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2008 Handle case insensitive hashing.
2009 (hash_keyword_value): Change type of `value' to unsigned int.
2011 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2013 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2014 precision FP, mark it as such. Likewise for double precision
2015 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2018 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2020 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2022 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2023 nesting depth when all the macros are expanded.
2025 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2027 * sparc-opc.c: The fcmp v9a instructions take an integer register
2028 as a destination, not a floating point register. From Christian
2029 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2031 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2033 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2034 syntax. From Roman Hodek
2035 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2037 * i386-dis.c (twobyte_has_modrm): Fix pand.
2039 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2041 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2043 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2045 * arm-dis.c: Add prototypes for arm_decode_shift and
2048 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2050 * mips-opc.c: Add r3900 insns.
2052 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2054 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2055 print delay slot instructions on the same line. When using a PC
2056 relative load, add a comment with the value being loaded if it can
2059 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2061 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2062 to pushS/popS for segment regs and byte constant so that
2063 pushw/popw printed when in 16 bit data mode.
2065 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2066 print cbtw, cwtd in 16 bit data mode.
2067 * i386-dis.c (putop): extra case W to support above.
2069 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2070 address size prefix in 16 bit address mode.
2072 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2074 * sh-dis.c: Reindent. Rename local variable fprintf to
2077 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2079 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2081 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2083 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2085 * mips16-opc.c (mip16_opcodes): same.
2087 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2089 * m68k-opc.c (moveb): Change $d to %d.
2091 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2093 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2094 (twobyte_has_modrm): Likewise.
2096 (OP_MMX, OP_EM, OP_MS): New static functions.
2098 * i386-dis.c: Revert patch of April 4. The output now matches
2101 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2103 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2106 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2108 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2110 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2112 * Makefile.in (install): Depend upon installdirs.
2113 (installdirs): New target.
2115 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2117 From Thomas Graichen <graichen@rzpd.de>:
2118 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2119 * configure: Rebuild.
2121 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2123 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2124 Delete string{,s}.h support.
2126 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2128 * cgen-asm.c (cgen_parse_operand_fn): New global.
2129 (cgen_parse_{{,un}signed_integer,address}): Update call to
2130 cgen_parse_operand_fn.
2131 (cgen_init_parse_operand): New function.
2132 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2133 from cgen_asm_init_parse.
2134 (m32r_cgen_assemble_insn): New operand `errmsg'.
2135 Delete call to as_bad, return error message to caller.
2136 (m32r_cgen_asm_hash_keywords): #if 0 out.
2138 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2140 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2142 [case 'J']: Fix typo in register name.
2144 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2146 * configure.in: Substitute SHLIB_LIBS.
2147 * configure: Rebuild.
2148 * Makefile.in (SHLIB_LIBS): New variable.
2149 ($(SHLIB)): Use $(SHLIB_LIBS).
2151 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2153 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2155 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2157 * disassemble.c (disassembler): Handle m32r.
2159 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2161 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2162 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2163 * Makefile.in (CFILES): Add them.
2164 (ALL_MACHINES): Add them.
2165 (dependencies): Regenerate.
2166 * configure.in (cgen_files): New variable.
2167 (bfd_m32r_arch): Add entry.
2168 * configure: Regenerate.
2170 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2172 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2173 * configure: Rebuild.
2175 * Makefile.in: Rebuild dependencies.
2177 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2179 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2182 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2184 * Branched binutils 2.8.
2186 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2188 * m10200-dis.c: Rename from mn10200-dis.c.
2189 * m10200-opc.c: Rename from mn10200-opc.c.
2190 * m10300-dis.c: Rename from mn10300-dis.c
2191 * m10300-opc.c: Rename from mn10300-opc.c.
2192 * Makefile.in: Update accordingly.
2194 * mips16-opc.c: Add mul and dmul macros.
2196 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2198 * makefile.vms: Update CFLAGS, add clean target.
2200 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2202 * mips-opc.c: Add "wait". From Ralf Baechle
2203 <ralf@gnu.ai.mit.edu>.
2205 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2206 * configure, config.in: Rebuild.
2207 * sysdep.h: Include <stdlib.h> if it exists.
2208 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2210 * Makefile.in: Rebuild dependencies.
2212 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2214 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2215 Andrew Bray <andy@madhouse.demon.co.uk>.
2217 * mips-opc.c: Add cast when setting mips_opcodes.
2219 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2221 * v850-dis.c (disassemble): Fix sign extension problem.
2222 * v850-opc.c (extract_d*): Fix sign extension problems to make
2223 disassembly calculate branch offsets correctly.
2225 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2227 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2229 * mips-opc.c: Add dctr and dctw.
2231 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2233 * d30v-dis.c (print_insn): Change the way signed constants
2236 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2238 * Makefile.in (BFD_H): New variable.
2239 (HFILES): New variable.
2240 (CFILES): Add all C files.
2241 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2242 Delete old dependencies, and build new ones.
2243 * dep-in.sed: New file.
2245 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2247 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2249 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2251 * mn10200-opc.c: Change "trap" to "syscall".
2252 * mn10300-opc.c: Add new "syscall" instruction.
2254 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2256 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2257 mulul insns on the coldfire.
2259 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2261 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2262 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2263 (print_insn_little_arm): Likewise.
2265 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2267 Based on patches from H.J. Lu <hjl@lucon.org>:
2268 * i386-dis.c (fetch_data): Add prototype.
2269 * m68k-dis.c (fetch_data): Add prototype.
2270 (dummy_print_address): Add prototype. Make static.
2271 * ppc-opc.c (valid_bo): Add prototype.
2272 * sparc-dis.c (build_hash_table): Add prototype.
2273 (is_delayed_branch, compute_arch_mask): Add prototypes.
2274 (print_insn_sparc): Make several local variables const.
2275 (compare_opcodes): Change arguments to const PTR. Add prototype.
2276 * sparc-opc.c (arg): Change name field to be const.
2277 (lookup_name, lookup_value): Add prototypes. Change table and
2278 name parameters to be const.
2279 (sparc_encode_asi): Change name parameter to be const.
2280 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2281 (sparc_encode_sparclet_cpreg): Likewise.
2282 (sparc_decode_asi): Change return type to be const.
2283 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2284 (sparc_decode_sparclet_cpreg): Likewise.
2286 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2288 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2289 Solaris doesn't like the combined options, and the -f is
2291 (stamp-tshlink, install): Likewise.
2293 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2295 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2298 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2300 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2302 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2304 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2307 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2309 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2311 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2313 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2315 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2317 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2319 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2321 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2322 floatformat_to_double to make portable.
2323 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2326 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2328 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2329 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2331 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2333 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2334 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2336 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2338 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2339 (OFF_SL_BR_SCALED): ... to this, and added the flag
2340 TIC80_OPERAND_BASEREL to the flags word.
2341 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2344 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2346 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2347 Change mips_opcodes from const array to a pointer,
2348 and change bfd_mips_num_opcodes from const int to int,
2349 so that we can increase the size of the mips opcodes table
2352 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2354 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2355 store BITNUM values in the table in one's complement form
2356 to match behavior when assembler is given a raw numeric
2357 value for a BITNUM operand.
2358 * tic80-dis.c (print_operand_bitnum): Ditto.
2360 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2362 * d30v-opc.c: Removed references to FLAG_X.
2364 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2366 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2368 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2370 * Makefile.in: Added d30v object files.
2371 * configure: (bfd_d30v_arch) Rebuilt.
2372 * configure.in: (bfd_d30v_arch) Added new case.
2373 * d30v-dis.c: New file.
2374 * d30v-opc.c: New file.
2375 * disassemble.c (disassembler) Add entry for d30v.
2377 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2379 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2380 representations for the floating point BITNUM values.
2382 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2384 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2385 in the table in one's complement form, as they appear in the
2387 (tic80_symbol_to_value): Use macros to access predefined
2389 (tic80_value_to_symbol): Ditto.
2390 (tic80_next_predefined_symbol): New function.
2391 * tic80-dis.c (print_operand_bitnum): Remove code that did
2392 one's complement for BITNUM values.
2394 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2396 * makefile.vms: Remove 8 bit characters. Update to latest
2399 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2401 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2403 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2405 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2406 (IMM24_PCREL): Likewise.
2408 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2410 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2411 address for an extended PC relative instruction that is not a
2414 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2416 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2419 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2421 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2422 (tic80_opcodes): Sort entries so that long immediate forms
2423 come after short immediate forms, making it easier for
2424 assembler to select the right one for a given operand.
2426 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2428 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2430 (print_insn_mips16): Likewise.
2432 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2434 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2435 a symbol class that restricts translation to just that
2436 class (general register, condition code, etc).
2438 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2440 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2441 and REG_DEST_E for register operands that have to be
2442 an even numbered register. Add REG_FPA for operands that
2443 are one of the floating point accumulator registers.
2444 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2445 (tic80_opcodes): Change entries that need even numbered
2446 register operands to use the new operand table entries.
2447 Add "or" entries that are identical to "or.tt" entries.
2449 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2451 * mips16-opc.c: Add new cases of exit instruction for
2453 * mips-dis.c (print_mips16_insn_arg): Display floating point
2454 registers in operands of exit instruction. Print `$' before
2455 register names in operands of entry and exit instructions.
2457 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2459 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2460 pairs for all predefined symbols recognized by the assembler.
2461 Also used by the disassembling routines.
2462 (tic80_symbol_to_value): New function.
2463 (tic80_value_to_symbol): New function.
2464 * tic80-dis.c (print_operand_control_register,
2465 print_operand_condition_code, print_operand_bitnum):
2466 Remove private tables and use tic80_value_to_symbol function.
2468 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2470 * d10v-dis.c (print_operand): Change address printing
2471 to correctly handle PC wrapping. Fixes PR11490.
2473 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2475 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2478 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2480 * mips-dis.c (print_insn_mips16): Set insn_info information.
2481 (print_mips16_insn_arg): Likewise.
2483 * mips-dis.c (print_insn_mips16): Better handling of an extend
2484 opcode followed by an instruction which can not be extended.
2486 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2488 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2489 coldfire moveb instruction to not allow an address register as
2490 destination. Although the documentation does not indicate that
2491 this is invalid, experiments uncovered unexpected behavior.
2492 Added a comment explaining the situation. Thanks to Andreas
2493 Schwab for pointing this out to me.
2495 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2497 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2498 entries are presorted so that entries with the same mnemonic are
2499 adjacent to each other in the table. Sort the entries for each
2500 instruction so that this is true.
2502 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2504 * m68k-dis.c: Include <libiberty.h>.
2505 (print_insn_m68k): Sort the opcode table on the most significant
2506 nibble of the opcode.
2508 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2510 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2511 "vsub", "vst", "xnor", and "xor" instructions.
2512 (V_a1): Renamed from V_a, msb of accumulator reg number.
2513 (V_a0): Add macro, lsb of accumulator reg number.
2515 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2517 * tic80-dis.c (print_insn_tic80): Broke excessively long
2518 function up into several smaller ones and arranged for
2519 the instruction printing function to be callable recursively
2520 to print vector instructions that have both a load and a
2521 math instruction packed into a single opcode.
2522 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2523 to explain why it comes after the other vector opcodes.
2525 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2527 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2528 move insns to handle immediate operands.
2530 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2532 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2533 fix operand mask in the "moveml" entries for the coldfire.
2535 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2537 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2538 New macros for building vector instruction opcodes.
2539 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2540 FMT_LI, which were unused. The field is now a flags field.
2541 Remove some opcodes that are possible, but illegal, such
2542 as long immediate instructions with doubles for immediate
2543 values. Add "vadd" and "vld" instructions.
2545 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2547 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2548 the order more logical. Move the shift alias instructions ("rotl",
2549 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2550 interspersed with the regular sr.x and sl.x instructions. Add
2551 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2552 "sub", "subu", "swcr", and "trap".
2554 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2556 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2557 (OFF_SL_PC): Renamed from OFF_SL.
2558 (OFF_SS_BR): New operand type for base relative operand.
2559 (OFF_SL_BR): New operand type for base relative operand.
2560 (REG_BASE): New operand type for base register operand.
2561 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2562 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2563 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2565 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2566 10 char field, padded with spaces on rhs, rather than a string
2567 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2568 than old TIC80_OPERAND_RELATIVE. Add support for new
2569 TIC80_OPERAND_BASEREL flag bit.
2571 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2573 * tic80-dis.c (print_insn_tic80): Print floating point operands
2575 * tic80-opc.c (SPFI): Add single precision floating point
2576 immediate operand type.
2577 (ROTATE): Add rotate operand type for shifts.
2578 (ENDMASK): Add for shifts.
2579 (n): Macro for the 'n' bit.
2580 (i): Macro for the 'i' bit.
2581 (PD): Macro for the 'PD' field.
2582 (P2): Macro for the 'P2' field.
2583 (P1): Macro for the 'P1' field.
2584 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2587 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2589 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2590 adding in current address for pc-relative operands.
2592 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2594 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2595 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2596 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2597 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2598 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2599 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2600 (REG_SCALED, LSI_SCALED): New operand types.
2601 (E): New macro for 'E' bit at bit 27.
2602 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2603 opcodes, including the various size flavors (b,h,w,d) for
2604 the direct load and store instructions.
2606 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2608 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2610 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2611 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2612 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2613 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2614 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2615 masks with "MASK_* & ~M_*" to get the M bit reset.
2616 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2618 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2620 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2621 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2622 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2624 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2625 CC, SICR, and LICR table entries.
2626 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2627 "bcnd", and "brcr" opcodes.
2629 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2631 * ppc-opc.c (powerpc_operands): Make comment match the
2632 actual fields (no shift field).
2633 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2634 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2635 partial implementation, work in progress.
2636 * tic80-opc.c (tic80_operands): Begin construction operands table.
2637 (tic80_opcodes): Continue populating opcodes table and start
2638 filling in the operand indices.
2639 (tic80_num_opcodes): Add this.
2641 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2643 * m68k-opc.c: Add #B case for moveq.
2645 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2647 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2648 before they are used.
2650 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2652 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2653 for "breakpoint" instruction.
2655 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2657 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2658 (dep): Use ALL_CFLAGS rather than CFLAGS.
2660 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2662 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2665 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2667 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2668 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2670 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2672 * mips16-opc.c: Add "abs".
2674 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2676 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2677 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2678 (disassembler): Add bfd_arch_tic80 support to set disassemble
2679 to print_insn_tic80.
2680 * tic80-dis.c (print_insn_tic80): Add stub.
2682 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2684 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2685 * configure: Regenerate with autoconf.
2686 * tic80-dis.c: Add file.
2687 * tic80-opc.c: Add file.
2689 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2691 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2693 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2695 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2696 (mn10200_opcodes): Use it for some logicals and btst insns.
2697 Add "break" and "trap" instructions.
2699 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2701 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2703 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2705 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2706 relative load or add now depends upon whether the instruction is
2709 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2711 * mn10200-dis.c: Finish writing disassembler.
2712 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2713 Fix mask for "jmp (an)".
2715 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2716 handle endianness issues for mn10300.
2718 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2720 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2722 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2723 instruction. Fix opcode field for "movb (imm24),dn".
2725 * mn10200-opc.c (mn10200_operands): Fix insertion position
2728 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2730 * mn10200-opc.c: Create mn10200 opcode table.
2731 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2732 but moving along nicely.
2734 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2736 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2738 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2740 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2741 specifiers for fmovem* instructions.
2743 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2745 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2747 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2749 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2752 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2754 * mn10300-opc.c: Add some comments explaining the various
2757 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2759 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2761 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2764 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2765 operand specifiers in fmovm* instructions.
2767 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2769 * ppc-opc.c (insert_li): Give an error if the offset has the two
2770 least significant bits set.
2772 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2774 * mips-dis.c (print_insn_mips16): Separate the instruction from
2775 the arguments with a tab, not a space.
2777 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2779 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2782 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2785 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2787 * configure: Rebuild with autoconf 2.12.
2789 Add support for mips16 (16 bit MIPS implementation):
2790 * mips16-opc.c: New file.
2791 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2792 (mips16_reg_names): New static array.
2793 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2794 after seeing a 16 bit symbol.
2795 (print_insn_little_mips): Likewise.
2796 (print_insn_mips16): New static function.
2797 (print_mips16_insn_arg): New static function.
2798 * mips-opc.c: Add jalx instruction.
2799 * Makefile.in (mips16-opc.o): New target.
2800 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2801 * configure: Rebuild.
2803 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2805 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2806 operand specifiers in *save, *restore and movem* instructions.
2808 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2811 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2812 register operands for immediate arithmetic, not, neg, negx, and
2813 set according to condition instructions.
2815 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2816 specifier of the effective-address operand in immediate forms of
2817 arithmetic instructions. The specifier for the immediate operand
2818 notes how and where the constant will be stored.
2820 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2822 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2825 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2828 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2830 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2832 * mn10300-dis.c (disassemble): Handle register lists.
2834 * mn10300-opc.c: Fix handling of register list operand for
2835 "call", "ret", and "rets" instructions.
2837 * mn10300-dis.c (disassemble): Print PC-relative and memory
2838 addresses symbolically if possible.
2839 * mn10300-opc.c: Distinguish between absolute memory addresses,
2840 pc-relative offsets & random immediates.
2842 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2844 (disassemble): Handle SPLIT and EXTENDED operands.
2846 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2848 * mn10300-dis.c: Rough cut at printing some operands.
2850 * mn10300-dis.c: Start working on disassembler support.
2851 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2853 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2855 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2857 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2859 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2861 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2863 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2864 register argument is calls and jmp instructions.
2866 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2868 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2869 getx operand. Fix opcode for mulqu imm,dn.
2871 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2873 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2874 in MN10300_OPERAND_SPLIT operands for how many bits
2875 appear in the basic insn word. Add IMM32_HIGH24,
2876 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2877 (mn10300_opcodes): Use new operands as needed.
2879 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2880 for bset, bclr, btst instructions.
2881 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2883 * mn10300-opc.c (mn10300_operands): Remove many redundant
2884 operands. Update opcode table as appropriate.
2885 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2886 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2888 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2890 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2891 operands (for indexed load/stores). Fix bitpos for DI
2892 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2893 few instructions that insert immediates/displacements in the
2894 middle of the instruction. Add IMM8E for 8 bit immediate in
2895 the extended part of an instruction.
2896 (mn10300_operands): Use new opcodes as appropriate.
2898 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2900 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2901 sequential so the assembler never parallelizes it with
2904 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2906 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2907 a data/address register that appears in register field 0
2908 and register field 1.
2909 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2911 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2913 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2914 standard disassembly.
2916 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2917 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2918 Recategorize PALcode instructions.
2920 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2922 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2924 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2926 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2927 there are no operand types.
2929 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2931 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2933 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2935 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2937 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2939 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2941 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2942 and sst.w instructions.
2944 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2947 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2949 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2952 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2954 * ppc-opc.c (PPCPWR2): Define.
2955 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2958 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2960 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2961 field for movhu instruction.
2963 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2964 cast value to "long" not "signed long" to keep hpux10
2967 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2969 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2972 * mn10300-opc.c (FMT*): Remove definitions.
2974 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2975 for shift-by-register opcodes.
2977 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2978 into [AD][MN][01] for encoding the position of the register
2981 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2983 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2984 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2986 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2988 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2989 Fix various typos. Add "PAREN" operand.
2990 (MEM, MEM2): Define.
2991 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2992 operands. Fix several typos.
2994 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2997 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2999 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3000 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3002 (mn10300_opcodes): Break opcode format out into its own field.
3003 Update many operand fields to deal with signed vs unsigned
3004 issues. Fix one or two typos in the "mov" instruction
3005 opcode, mask and/or operand fields.
3007 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3009 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3010 m68851 wasn't reset.
3012 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3014 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3015 all opcodes. Very rough cut at operands for all opcodes.
3017 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3020 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3022 * mn10200-opc.c, mn10300-opc.c: New files.
3023 * mn10200-dis.c, mn10300-dis.c: New files.
3024 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3025 * disassemble.c: Break mn10x00 support into 10200 and 10300
3027 * configure.in: Likewise.
3028 * configure: Rebuilt.
3030 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3032 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3034 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3036 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3038 * disassemble (ARCH_mn10x00): Define.
3039 (disassembler): Handle bfd_arch_mn10x00.
3040 * configure.in: Recognize bfd_mn10x00_arch.
3041 * configure: Rebuilt.
3043 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3045 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3046 accordingly. Don't declare functions using op_rtn.
3048 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3050 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3051 params to be more standard.
3052 * (disassemble): Print absolute addresses and symbolic names for
3053 branch and jump targets.
3054 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3056 * (v850_opcodes): Add breakpoint insn.
3058 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3060 * m68k-opc.c: Move the fmovemx data register cases before the
3061 other cases, so that they get recognized before the data register
3062 does gets treated as a degenerate register list.
3064 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3066 * mips-opc.c: Add a case for "div" and "divu" with two registers
3067 and a destination of $0.
3069 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3071 * mips-dis.c (print_insn_arg): Add prototype.
3072 (_print_insn_mips): Ditto.
3074 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3076 * mips-dis.c (print_insn_arg): Print condition code registers as
3079 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3081 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3083 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3085 * v850-dis.c (disassemble): Make static. Provide prototype.
3087 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3089 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3092 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3094 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3095 ']' characters into the output stream.
3096 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3097 Add "memop" field to all opcodes (for the disassembler).
3098 Reorder opcodes so that "nop" comes before "mov" and "jr"
3099 comes before "jarl".
3101 * v850-dis.c (print_insn_v850): Fix typo in last change.
3103 * v850-dis.c (print_insn_v850): Properly handle disassembling
3104 a two byte insn at the end of a memory region when the memory
3105 region's size is only two byte aligned.
3107 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3109 * v850-dis.c (v850_reg_names): Define.
3110 (v850_sreg_names, v850_cc_names): Likewise.
3111 (disassemble): Very rough cut at printing operands (unformatted).
3113 * v850-opc.c (BOP_MASK): Fix.
3114 (v850_opcodes): Fix mask for jarl and jr.
3116 * v850-dis.c: New file. Skeleton for disassembler support.
3117 * Makefile.in Remove v850 references, they're not needed here.
3118 * configure.in: Add v850-dis.o when building v850 toolchains.
3119 * configure: Rebuilt.
3120 * disassemble.c (disassembler): Call v850 disassembler.
3122 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3123 (insert_d8_6, extract_d8_6): New functions.
3124 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3125 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3127 (IF4A, IF4B): Use "D7" instead of "D7S".
3128 (IF4C, IF4D): Use "D8_7" instead of "D8".
3129 (IF4E, IF4F): New. Use "D8_6".
3130 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3131 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3133 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3134 (v850_operands): Change D16 to D16_15, use special insert/extract
3135 routines. New new D16 that uses the generic insert/extract code.
3136 (IF7A, IF7B): Use D16_15.
3137 (IF7C, IF7D): New. Use D16.
3138 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3140 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3141 message. Issue an error if the branch offset is odd.
3143 * v850-opc.c: Add notes about needing special insert/extract
3144 for all the load/store insns, except "ld.b" and "st.b".
3146 * v850-opc.c (insert_d22, extract_d22): New functions.
3147 (v850_operands): Use insert_d22 and extract_d22 for
3149 (insert_d9): Fix range check.
3151 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3153 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3154 and set bits field to D9 and D22 operands.
3156 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3158 * v850-opc.c (v850_operands): Define SR2 operand.
3159 (v850_opcodes): "ldsr" uses R1,SR2.
3161 * v850-opc.c (v850_opcodes): Fix opcode specs for
3162 sld.w, sst.b, sst.h, sst.w, and nop.
3164 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3166 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3167 end of the opcode table.
3169 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3171 * d10v-opc.c (pre_defined_registers): Added register pairs,
3172 "r0-r1", "r2-r3", etc.
3174 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3176 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3177 Create I16U for an unsigned 16bit mmediate operand.
3178 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3180 * v850-opc.c (v850_operands): Define EP operand.
3181 (IF4A, IF4B, IF4C, IF4D): Use EP.
3183 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3184 with immediate operand, "movhi". Tweak "ldsr".
3186 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3187 correct. Get sld.[bhw] and sst.[bhw] closer.
3189 * v850-opc.c (v850_operands): "not" is a two byte insn
3191 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3193 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3195 * v850-opc.c (two): Get order of words correct.
3197 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3199 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3200 register source and destination operands.
3201 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3203 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3204 same thinko in "trap" opcode.
3206 * v850-opc.c (v850_opcodes): Add initializer for size field
3209 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3210 Add D8 for 8-bit unsigned field in short load/store insns.
3211 (IF4A, IF4D): These both need two registers.
3212 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3213 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3214 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3215 for "ldsr" and "stsr".
3216 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3219 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3220 short store word (sst.w).
3222 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3224 * v850-opc.c (v850_operands): Added insert and extract fields,
3225 pointers to functions that handle unusual operand encodings.
3227 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3229 * v850-opc.c (v850_opcodes): Enable "trap".
3231 * v850-opc.c (v850_opcodes): Fix order of displacement
3232 and register for "set1", "clr1", "not1", and "tst1".
3234 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3236 * v850-opc.c (v850_operands): Add "B3" support.
3237 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3240 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3242 * v850-opc.c: Close unterminated comment.
3244 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3246 * v850-opc.c (v850_operands): Add flags field.
3247 (v850_opcodes): add move opcodes.
3249 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3251 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3252 * configure: (bfd_v850v_arch) Add new case.
3253 * configure.in: (bfd_v850_arch) Add new case.
3254 * v850-opc.c: New file.
3256 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3258 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3260 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3262 * d10v-opc.c: Add additional information to the opcode
3263 table to help determinine which instructions can be done
3266 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3268 * mpw-make.sed: Update editing of include pathnames to be
3271 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3273 * arm-opc.h: Added "bx" instruction definition.
3275 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3277 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3279 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3281 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3283 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3285 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3287 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3289 * makefile.vms: Update for alpha-opc changes.
3291 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3293 * i386-dis.c (print_insn_i386): Actually return the correct value.
3294 (ONE, OP_ONE): #ifdef out; not used.
3296 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3298 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3299 Changed subi operand type to treat 0 as 16.
3301 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3303 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3306 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3308 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3309 memory transfer instructions. Add new format string entries %h and %s.
3310 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3313 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3315 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3316 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3318 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3320 * alpha-dis.c (print_insn_alpha_osf): Remove.
3321 (print_insn_alpha_vms): Remove.
3322 (print_insn_alpha): Make globally visible. Chose the register
3323 names based on info->flavour.
3324 * disassemble.c: Always return print_insn_alpha for the alpha.
3326 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3328 * d10v-dis.c (dis_long): Handle unknown opcodes.
3330 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3332 * d10v-opc.c: Changes to support signed and unsigned numbers.
3333 All instructions with the same name that have long and short forms
3334 now end in ".l" or ".s". Divs added.
3335 * d10v-dis.c: Changes to support signed and unsigned numbers.
3337 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3339 * d10v-dis.c: Change all functions to use info->print_address_func.
3341 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3343 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3344 move ccr/sr insns more strict so that the disassembler only
3345 selects them when the addressing mode is data register.
3347 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3348 * d10v-opc.c (pre_defined_registers): Declare.
3349 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3350 to pick a better name for the registers.
3352 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3354 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3355 operands for fexpand and fpmerge. From Christian Kuehnke
3356 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3358 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3360 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3361 print routine. Take new regnames and cpumask arguments.
3362 Kill the environment variable nonsense.
3363 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3364 (print_insn_alpha_vms): New function. Do VMS style regnames.
3365 * disassemble.c (disassembler): Test bfd flavour to pick
3366 between OSF and VMS routines. Default to OSF.
3368 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3370 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3371 * configure: Rebuild.
3372 * Makefile.in (install): Use @INSTALL_SHLIB@.
3374 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3376 * configure: (bfd_d10v_arch) Add new case.
3377 * configure.in: (bfd_d10v_arch) Add new case.
3378 * d10v-dis.c: New file.
3379 * d10v-opc.c: New file.
3380 * disassemble.c (disassembler) Add entry for d10v.
3382 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3384 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3385 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3387 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3389 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3390 distinguish between variants of the instruction set.
3391 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3392 distinguish between variants of the instruction set.
3394 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3396 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3397 the 8086 instruction set.
3398 * i386-dis.c: General cleanups. Make most things static. Add
3399 prototypes. Get rid of static variables aflags and dflags. Pass
3400 them as args (to almost everything).
3402 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3404 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3406 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3408 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3409 if the next arg is marked with SRC_IN_DST. Gross.
3411 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3412 we're looking for and find EXR.
3414 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3415 if we're looking for KBIT and we don't find it.
3417 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3420 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3421 3bit immediate operands.
3423 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3425 * Released binutils 2.7.
3427 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3428 <kkaempf@progis.ac-net.de>.
3430 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3432 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3434 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3436 * sparc-dis.c (print_insn_sparclite): New routine to print
3437 sparclite instructions.
3439 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3441 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3443 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3445 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3446 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3447 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3449 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3451 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3452 Use autoconf-set values.
3453 (docdir, oldincludedir): Removed.
3454 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3456 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3458 * alpha-opc.c: New file.
3459 * alpha-opc.h: Remove.
3460 * alpha-dis.c: Complete rewrite to use new opcode table.
3461 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3462 * configure: Rebuild with autoconf 2.10.
3463 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3464 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3466 (alpha-opc.o): New target.
3468 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3470 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3471 Set imm_added_to_rs1 even if the source and destination register
3474 * sparc-opc.c: Add some two operand forms of the wr instruction.
3476 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3478 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3481 * disassemble.c (disassembler): Handle H8/S.
3482 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3484 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3486 * sparc-opc.c: Add beq/teq as aliases for be/te.
3488 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3489 <sergei@msil.sps.mot.com>.
3491 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3493 * makefile.vms: New file.
3495 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3497 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3499 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3502 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3504 * i386-dis.c (OP_OFF): Call append_prefix.
3506 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3508 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3509 unsigned long to silence a warning from the Solaris PowerPC
3512 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3514 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3516 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3518 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3520 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3521 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3522 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3523 cpush, cpusha, cpull sparclet insns.
3525 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3527 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3529 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3531 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3532 Set F_FLOAT on other floating point instructions.
3534 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3536 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3538 (powerpc_opcodes): Add 860/821 specific SPRs.
3540 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3542 * configure.in: Permit --enable-shared to specify a list of
3543 directories. Set and substitute BFD_PICLIST.
3544 * configure: Rebuild.
3545 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3546 uses. Set to @BFD_PICLIST@.
3548 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3550 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3551 not "abs", which may be needed for the absolute in something
3552 like btst #0,@10:8. Print L_3 immediates separately from other
3553 immediates. Change ABSMOV reference to ABS8MEM.
3555 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3557 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3558 (current_arch_mask): New static global.
3559 (compute_arch_mask): New static function.
3560 (print_insn_sparc): Delete sparc_v9_p. New static local
3561 current_mach. Resort opcode table if current_mach changes.
3562 Generalize "insn not supported" test.
3563 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3564 Delete test for v9/!v9.
3565 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3567 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3568 (brfcx): Renamed to FBRX.
3569 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3570 coprocessor mnemonics are not supported on the sparclet).
3571 (condf): Renamed to CONDF.
3572 (SLCBCC2): Delete F_ALIAS flag.
3574 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3576 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3577 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3579 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3581 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3582 that the shared library version number is set correctly.
3584 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3586 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3587 Miles Bader <miles@gnu.ai.mit.edu>.
3588 * configure: Rebuild.
3590 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3592 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3595 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3597 * configure: Rebuild with autoconf 2.8.
3599 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3601 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3602 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3604 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3606 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3607 since they appear as targets in Makefile.in.
3608 * configure: Rebuild.
3610 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3612 * mpw-make.sed: Edit out shared library support bits.
3614 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3616 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3617 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3618 (sparc_opcodes): Add sparclet insns.
3619 (sparclet_cpreg_table): New static local.
3620 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3621 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3623 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3625 * i386-dis.c (index16): New static variable.
3626 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3628 (OP_indirE): Return result of OP_E.
3629 (OP_E): Check for 16 bit addressing mode, and disassemble
3630 correctly. Optimised 32 bit case a little. Don't print
3631 "(base,index,scale)" when sib specifies only an offset.
3633 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3635 * configure.in: Set and substitute SHLIB_DEP.
3636 * configure: Rebuild.
3637 * Makefile.in (SHLIB_DEP): New variable.
3638 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3639 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3640 COMMON_SHLIB, add them to piclist with appropriate modifications.
3641 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3642 here: just use piclist.
3644 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3646 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3647 (print_insn_sparc): Rewrite v9/not-v9 tests.
3648 (compare_opcodes): Likewise.
3649 * sparc-opc.c (MASK_<ARCH>): Define.
3650 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3651 (sparclet,v6notv9): Define.
3652 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3653 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3655 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3657 * configure.in: Call AC_PROG_CC before configure.host.
3658 * configure: Rebuild.
3660 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3662 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3664 * i386-dis.c (onebyte_has_modrm): New static array.
3665 (twobyte_has_modrm): New static array.
3666 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3668 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3670 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3673 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3675 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3678 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3680 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3681 m68010up, not just m68020up | cpu32.
3683 * Makefile.in (SONAME): New variable.
3684 ($(SHLINK)): Make a link to the transformed name, as well.
3685 (stamp-tshlink): New target.
3686 (install): Skip stamp-tshlink during install.
3688 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3690 * configure.in: Call AC_ARG_PROGRAM.
3691 * configure: Rebuild.
3692 * Makefile.in (program_transform_name): New variable.
3693 (install): Transform library name before installing it.
3695 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3697 * i960-dis.c (mem): Add HX dcinva instruction.
3699 Support for building as a shared library, based on patches from
3700 Alan Modra <alan@spri.levels.unisa.edu.au>:
3701 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3702 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3703 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3704 * configure: Rebuild.
3705 * Makefile.in (ALLLIBS): New variable.
3706 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3707 (COMMON_SHLIB, SHLINK): New variables.
3708 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3709 (STAGESTUFF): Remove variable.
3710 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3711 (stamp-piclist, piclist): New targets.
3712 ($(SHLIB), $(SHLINK)): New targets.
3713 ($(OFILES)): Depend upon stamp-picdir.
3714 (disassemble.o): Build twice if PICFLAG is set.
3715 (MOSTLYCLEAN): Add pic/*.o.
3716 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3717 (distclean): Remove pic and stamp-picdir.
3718 (install): Install shared libraries.
3719 (stamp-picdir): New target.
3721 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3723 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3724 Print unknown instruction as "unknown", rather than in hex.
3726 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3728 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3730 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3732 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3734 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3736 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3737 when necessary. From Ulrich Drepper
3738 <drepper@myware.rz.uni-karlsruhe.de>.
3740 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3742 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3743 sparc_num_opcodes. Update architecture enum values.
3744 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3745 (sparc_opcode_lookup_arch): New function.
3746 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3747 (sparc_opcodes): Add v9a shutdown insn.
3749 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3751 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3752 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3754 (print_insn_sparc64): Deleted.
3755 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3758 * sparc-opc.c (architecture_pname): Add v9a.
3760 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3762 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3763 incorrectly defined as 0x16 when it should be 0x15.
3764 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3765 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3766 excb (exception barrier) which is defined in the Alpha
3767 Architecture Handbook version 2.
3768 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3769 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3770 disassembled as or, for example.
3772 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3774 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3775 (_print_insn_mips): Change i from int to unsigned int.
3777 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3779 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3780 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3782 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3784 * i386-dis.c: Added Pentium Pro instructions.
3786 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3788 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3791 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3793 * sh-opc.h (sh_nibble_type): Added REG_B.
3794 (sh_arg_type): Added A_REG_B.
3795 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3797 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3799 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3801 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3803 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3805 * Makefile.in (distclean): Remove stamp-h. From Ronald
3806 F. Guilmette <rfg@monkeys.com>.
3808 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3810 From David Mosberger-Tang <davidm@azstarnet.com>:
3811 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3814 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3816 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3817 (sh_table): Added many SH3 opcodes.
3818 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3820 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3822 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3823 (subco,subco.): Mark this PPC, not PPCCOM.
3825 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3827 * configure: Rebuild with autoconf 2.7.
3829 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3831 * configure: Rebuild with autoconf 2.6.
3833 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3835 * configure.in: Sort list of architectures. Accept but do nothing
3836 for alliant, convex, pyramid, romp, and tahoe.
3838 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3840 * a29k-dis.c (print_special): Change num to unsigned int.
3842 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3844 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3847 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3849 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3850 * configure: Rebuilt.
3852 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3854 * configure.in: Add case for bfd_i860_arch.
3855 * configure: Rebuild.
3857 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3859 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3860 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3861 (NEXTDOUBLE): Likewise.
3862 (print_insn_m68k): Don't match fmoveml if there is more than one
3863 register in the list.
3864 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3866 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3868 * m68k-opc.c: Use #W rather than #w.
3869 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3871 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3873 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3874 and likewise for all the dbxx opcodes.
3876 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3878 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3880 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3882 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3883 the VR4100 specific instructions to the mips_opcodes structure.
3885 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3887 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3888 ugly Metrowerks bug in CW6, is fixed in CW7.
3890 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3892 * ppc-opc.c (whole file): Add flags for common/any support.
3894 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3896 * Makefile.in (BISON): Remove macro.
3897 (FLAGS_TO_PASS): Remove BISON.
3899 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3901 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3903 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3904 instructions that take no args by looking at the match mask.
3905 (print_insn_arg): Always print "%" before register names.
3906 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3907 [case '_']: Don't print "@#" before address.
3908 [case 'J']: Use "%s" as format string, not register name.
3909 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3911 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3913 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3916 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3918 From David Mosberger-Tang <davidm@azstarnet.com>
3920 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3921 (alpha_insn_set): added definitions for VAX floating point
3922 instructions (Unix compilers don't generate these, but handcoded
3923 assembly might still use them).
3925 * alpha-dis.c (print_insn_alpha): added support for disassembling
3926 the miscellaneous instructions in the Alpha instruction set.
3928 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3930 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3931 no longer create sysdep.h, sed ppc-opc.c to work around a
3932 serious Metrowerks C bug.
3933 * mpw-make.in: Remove.
3934 * mpw-make.sed: New file, used by mpw-configure to edit
3935 Makefile.in into an MPW makefile.
3937 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3939 * Makefile.in (maintainer-clean): New synonym for realclean.
3941 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3943 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3944 which use '0', '1', and '2' instead. Specify the proper size for
3945 a pmove immediate operand. Correct the pmovefd patterns to be
3946 moves to a register, not from a register.
3947 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3949 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3951 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3952 %psr, %wim, %tbr as F_NOTV9.
3954 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3956 * Makefile.in (Makefile): Just rebuild Makefile when running
3958 (config.h, stamp-h): New targets.
3959 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3960 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3961 rebuilding config.h.
3962 * configure: Rebuild.
3964 * mips-opc.c: Change unaligned loads and stores with "t,A"
3965 operands to use "t,A(b)".
3967 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3969 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3971 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3973 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3974 until 3 instead of until 2.
3976 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3978 * Makefile.in (ALL_CFLAGS): Define.
3979 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3980 (MOSTLYCLEAN): Add config.log.
3981 (distclean): Don't remove config.log.
3982 * configure.in: Substitute HDEFINES.
3983 * configure: Rebuild.
3985 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3987 * sh-opc.h (sh_arg_type): Add F_FR0.
3988 (sh_table, case fmac): Add F_FR0 as first argument.
3990 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3992 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3994 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3996 * sparc-dis.c: Remove all references to NO_V9.
3998 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4000 * aclocal.m4: Just include ../bfd/aclocal.m4.
4001 * configure: Rebuild.
4003 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4005 * sparc-dis.c (X_DISP19): Define.
4006 (print_insn, case 'G'): Use it.
4007 (print_insn, case 'L'): Sign extend displacement.
4009 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4011 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4012 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4013 host_makefile_frag or frags.
4014 * aclocal.m4: New file.
4015 * configure: Rebuild.
4016 * Makefile.in (INSTALL): Set to @INSTALL@.
4017 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4018 (INSTALL_DATA): Set to @INSTALL_DATA@.
4020 (AR_FLAGS): Set to rc rather than qc.
4021 (CC): Define as @CC@.
4022 (CFLAGS): Set to @CFLAGS@.
4023 (@host_makefile_frag@): Remove.
4024 (config.status): Remove dependency upon @frags@.
4026 * configure.in: ../bfd/config.bfd now just sets shell variables.
4027 Use them rather than looking through target Makefile fragments.
4028 * configure: Rebuild.
4030 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4032 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4034 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4036 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4037 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4040 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4041 (lookup_{name,value}): New functions.
4042 (prefetch_table): New static local.
4043 (sparc_{encode,decode}_prefetch): New functions.
4044 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4046 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4048 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4051 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4053 * sh-dis.c: Correct comment on first line of file.
4055 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4057 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4059 * sparc-opc.c (asi, membar): New static locals.
4060 (sparc_{encode,decode}_{asi,membar}): New functions.
4061 (sparc_opcodes, membar insn): Fix.
4062 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4063 Support decoding of membar masks.
4066 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4068 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4070 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4072 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4073 and likewise for the other branches. Add bhs as an alias for bcc,
4074 and likewise for the size variants. Add dbhs as an alias for
4077 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4079 * sh-opc.h (FP sts instructions): Update to match reality.
4081 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4083 * m68k-dis.c: (fpcr_names): Add % before all register names.
4084 (reg_names): Likewise.
4085 (print_insn_arg): Don't explicitly print % before register names.
4086 Add % before register names in static array names. In case 'r',
4087 print data registers as `@(Dn)', not `Dn@'. When printing a
4088 memory address, don't print @# before it.
4089 (print_indexed): Change base_disp and outer_disp from int to
4090 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4091 syntax. Sign extend 8 byte displacement correctly.
4092 (print_base): Print using MIT syntax. Print zpc when appropriate.
4093 Change parameter disp from int to bfd_vma.
4095 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4098 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4100 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4101 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4102 * sh-opc.h (sh_arg_type): Add new operand types.
4103 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4105 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4107 * Makefile.in (distclean): Remove generated file config.h.
4109 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4111 * Makefile.in (distclean): Remove generated file config.h.
4113 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4115 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4117 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4119 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4120 rather than numopcodes. Use m68k_opcodes rather than removed
4121 opcode function. Don't check F_ALIAS.
4122 (print_insn_arg): Change first parameter to be const char *.
4123 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4124 (m68k-opc.o): New target.
4125 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4126 * configure: Rebuild.
4128 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4130 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4131 (opcode_bits, opcode_hash_table): New variables.
4132 (opcodes_initialized): Renamed from opcodes_sorted.
4133 (build_hash_table): New function.
4134 (is_delayed_branch): Use hash table.
4135 (print_insn): Renamed from print_insn_sparc, made static.
4136 Build and use hash table. If !sparc64, ignore sparc64 insns,
4137 and vice-versa if sparc64.
4138 (print_insn_sparc, print_insn_sparc64): New functions.
4139 (compare_opcodes): Move sparc64 opcodes to end.
4140 Print commutative insns with constant second.
4141 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4143 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4145 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4146 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4147 avoids printing a delay slot in a delay slot.
4148 * sh-opc.h (sh_table): Fully bracket last entry.
4150 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4152 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4154 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4156 * configure.in: Get host_makefile_frag from ${srcdir}.
4158 * configure.in: Autoconfiscated. Check for string[s].h. Create
4159 config.h from config.in. Don't set up sysdep.h link.
4160 * sysdep.h: New file.
4161 * configure, config.in: New files, generated from configure.in.
4162 * Makefile.in: Updated to be processed autoconf-style.
4163 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4164 (Makefile): Depend on config.status.
4165 (config.status): New rule.
4166 * configure.bat: Update Makefile substitutions.
4168 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4170 * mips-opc.c (L1): Define.
4171 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4172 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4175 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4177 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4178 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4179 have multiple add units but only a single logical unit.
4181 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4182 shifted by 18, without any insertion or extraction function.
4183 (insert_cr, extract_cr): Remove.
4185 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4187 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4190 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4192 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4193 * sh-opc.h: Add copyright.
4195 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4197 * Makefile.in (crunch-m68k): Delete extra target accidentally
4198 checked in a while ago.
4200 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4202 * sh-opc.h (sh_table): Add SH3 support.
4204 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4206 * sh-opc.h: Added bsrf and braf.
4208 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4210 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4211 bogus [ls]fm{ea,fd} patterns.
4213 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4214 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4215 initialize it from memory. Make function static.
4216 (print_insn_{big,little}_arm): New functions.
4217 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4218 the correct endianness.
4220 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4222 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4225 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4227 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4228 17th, so that it builds again using GCC as the compiler.
4230 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4232 * mips-dis.c (print_insn_little_mips): Cast return value from
4233 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4234 expects an unsigned long, and that might be fewer words of
4235 argument storage (e.g., if bfd_vma is long long on a 32-bit
4237 (print_insn_big_mips): Likewise with bfd_getb32 value.
4238 (_print_insn_mips): Now static.
4240 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4242 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4243 gcc memory hog problem with initializer is fixed.
4245 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4247 Merge in support for Mac MPW as a host.
4248 (Old change descriptions retained for informational value.)
4250 * mpw-config.in (archname): Compute from the config.
4251 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4253 * mpw-config.in (target_arch): Compute from canonical target.
4254 (m68k, mips, powerpc, sparc): Add architectures.
4255 * mpw-make.in (disassemble.c.o): Add.
4256 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4258 * mpw-config.in (BFD_MACHINES): Set to a default value.
4259 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4261 * mpw-make.in (CSEARCH): Add extra-include to search path.
4263 * mpw-config.in (varargs.h): Don't create.
4264 (sysdep.h): Create using forward-include.
4265 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4267 * mpw-config.in: New file, MPW version of configure.in.
4268 * mpw-make.in: New file, MPW version of Makefile.in.
4270 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4272 * alpha-dis.c (print_insn_alpha): Put empty statement after
4275 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4277 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4278 (low_sign_extend): Likewise.
4279 (get_field): Delete unused function.
4280 (set_field, deposit_14, deposit_21): Likewise.
4282 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4284 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4287 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4289 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4291 * alpha-opc.h (OSF_ASMCODE): define
4292 print pal-code names as defined in App C of the
4293 Alpha Architecture Reference Manual
4295 * alpha-dis.c: cleaned up output
4296 print stylized code forms as defined in App A.4.3 of the
4297 Alpha Architecture Reference Manual
4299 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4301 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4303 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4306 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4308 * m68k-dis.c (opcode): New function. Returns address of opcode
4309 table entry given index, even if the opcode table was split to
4310 work around gcc bugs.
4311 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4313 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4314 (reg_names): Now const.
4315 (print_insn_arg): Arrays cacheFieldName and names now const.
4316 (print_indexed): Array scales now const.
4318 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4320 * ppc-opc.c: Sort recently added instructions by minor opcode
4321 number within major opcode number.
4323 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4325 * hppa-dis.c: Include libhppa.h.
4327 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4329 * mips-opc.c: Change dli to use M_DLI, and add dla.
4331 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4333 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4335 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4337 * mips-opc.c: Add r4650 mul instruction.
4339 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4341 * mips-opc.c: Add uld and usd macros for unaligned double load and
4344 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4346 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4347 mfdcr, mtdcr, icbt, iccci.
4349 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4351 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4352 signed char fields to shorts, more portable.
4354 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4356 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4357 char fields as signed chars, since they may have negative values.
4359 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4361 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4362 (mycroft@netbsd.org).
4364 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4366 From "Logg, Ed" <elogg@ea.com>:
4367 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4368 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4371 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4373 * ppc-opc.c: Changes based on patch from David Edelsohn
4374 <edelsohn@mhpcc.edu>.
4375 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4378 (insert_tbr): New static function.
4379 (extract_tbr): New static function.
4380 (XFXFXM_MASK, XFXM): Define.
4381 (XSPRBAT_MASK, XSPRG_MASK): Define.
4382 (powerpc_opcodes): Add instructions to access special registers by
4383 name. Add mtcr and mftbu.
4385 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4387 * mips-opc.c (P3): Define.
4388 (mips_opcodes): Add mad and madu.
4390 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4392 * configure.in: Add W65 support.
4393 * disassemble.c: Likewise.
4394 * w65-opc.h, w65-dis.c: New files.
4396 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4398 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4401 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4403 * mips-opc.c: Add dli as a synonym for li.
4405 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4407 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4408 print something for reserved opcode values, even if it won't
4411 * mips-dis.c (_print_insn_mips): When initializing, shift right
4412 and mask, to avoid sign extension problems on the Alpha.
4414 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4417 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4419 * sh-opc.h (mov.l gbr): Get direction right.
4420 * sh-dis.c (print_insn_shx): New function.
4421 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4422 print opcodes with right byte order.
4424 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4426 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4427 to avoid conflicts with getopt.
4429 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4431 * hppa-dis.c (print_insn_hppa): Read the instruction using
4432 bfd_getb32, so that it works on a little endian or 64 bit host.
4433 Remove unused local variable op.
4435 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4437 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4438 addu does not work correctly if -mips3.
4440 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4442 * a29k-dis.c (print_special): Add special register names defined
4443 on 29030, 29040 and 29050.
4444 (print_insn): Handle new operand type 'I'.
4446 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4448 * Makefile.in (INSTALL): Use top level install.sh script.
4450 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4452 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4453 that it works on a little endian host.
4455 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4457 * configure.in: Use ${config_shell} when running config.bfd.
4459 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4461 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4463 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4465 * a29k-dis.c (print_insn): Print the opcode.
4467 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4469 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4471 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4473 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4475 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4477 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4478 which store a value into memory.
4480 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4482 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4483 * arm-dis.c, arm-opc.h: New files.
4485 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4487 * Makefile.in (ns32k-dis.o): Add dependency.
4488 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4489 string, not as array of chars.
4491 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4493 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4495 * sparc-opc.c: Added sparclite extended FP operations, and
4496 versions of v9 impdep* instructions permitting specification of
4499 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4501 * i960-dis.c (reg_names): Now const.
4502 (struct sparse_tabent): New type, copied from array type in mem
4504 (ctrl): Local static array ctrl_tab now const.
4505 (cobr): Local static array cobr_tab now const.
4506 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4507 static variable mem_tab no longer explicitly initialized. Changed
4508 mem_init to const array of struct sparse_tabent.
4509 (reg): Local static variable reg_tab no longer explicitly
4510 initialized. Changed reg_init to const array of struct
4512 (ea): Local static array scale_tab now const.
4514 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4517 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4519 * configure.bat: the disassember needs to be enabled for
4520 "objdump -d" to work in djgpp.
4522 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4524 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4525 (invalid_float): Enabled general version, doesn't require running
4526 on ns32k host. Changed to take char* argument, and test for
4527 explicitly specified sizes, instead of using sizeof() on host CPU
4529 (INVALID_FLOAT): Cast first argument.
4530 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4531 list_P032, list_M032): Now const.
4532 (optlist, list_search): Made appropriate arguments now point to
4534 (print_insn_arg): Changed static array of one-character-string
4535 pointers into a static const array of characters; fixed sprintf
4536 statement accordingly.
4538 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4540 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4541 from distribution. A ns32k-dis.c from a previous distribution has
4542 been brought up to date and supports the new interface.
4544 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4546 * configure.in: add bfd_ns32k_arch target support.
4548 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4549 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4551 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4553 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4556 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4558 * h8300-dis.c, mips-dis.c: Don't use true and false.
4560 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4562 * configure.in: Change --with-targets to --enable-targets.
4564 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4566 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4567 opcodes to the first instruction with that opcode, to speed
4568 disassembly of large files. From ralphc@pyramid.com (Ralph
4571 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4573 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4575 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4577 * configure.bat: update to latest makefile.in
4579 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4581 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4582 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4583 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4584 slot insn is in a delay slot.
4585 * z8k-opc.h: (resflg): Fix patterns.
4586 * h8500-opc.h Fix CR insn patterns.
4588 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4590 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4591 "cmpl" before POWER versions, so that gas -many uses them.
4593 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4595 * disassemble.c: New file.
4596 * Makefile.in (OFILES): Add disassemble.o.
4597 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4598 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4599 binutils/configure.in.
4601 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4602 opcode being examined.
4604 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4606 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4607 (insert_ral, insert_ram, insert_ras): New functions.
4608 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4609 RAS for store with update.
4611 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4613 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4614 (edelsohn@npac.syr.edu).
4616 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4618 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4621 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4623 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4625 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4627 * ppc-opc.c (powerpc_operands): The signedp field has been
4628 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4629 instead. Add new operand SISIGNOPT.
4630 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4631 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4632 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4635 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4637 * i386-dis.c (struct private): Renamed to dis_private. `private'
4638 is a reserved word for dynix cc.
4640 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4642 * configure.in: Change error message to refer to bfd/config.bfd
4643 rather than bfd/configure.in.
4645 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4647 * ppc-opc.c: Define POWER2 as short alias flag.
4648 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4651 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4653 * i960-dis.c (print_insn_i960): Don't read a second word for
4654 opcodes 0, 1, 2 and 3.
4656 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4658 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4660 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4662 * m68881-ext.c: Removed; no longer used.
4663 * Makefile.in: Changed accordingly.
4665 * m68k-dis.c (ext_format_68881): Don't declare.
4666 (print_insn_m68k): If an instruction uses place 'i', it uses at
4667 least four fixed bytes.
4668 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4669 extended float, convert to double using floatformat_to_double, not
4670 ieee_extended_to_double, and fetch the data before converting it.
4672 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4674 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4675 davidj@ICSI.Berkeley.EDU (David Johnson).
4677 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4679 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4680 PowerPC uses bdnz[l][a].
4682 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4684 * dis-buf.c, i386-dis.c: Include sysdep.h.
4686 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4688 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4690 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4691 by Motorola PowerPC 601 with PPC_OPCODE_601.
4692 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4693 Disassemble Motorola PowerPC 601 instructions as well as normal
4694 PowerPC instructions.
4696 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4698 * i960-dis.c (reg, mem): Just use a static array instead of
4701 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4703 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4704 condition name index if this is for a negated condition.
4706 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4707 Floating point format for 'H' operand is backwards from normal
4708 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4709 operands (fmpyadd and fmpysub), handle bizarre register
4710 translation correctly for single precision format.
4712 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4713 or 'I' operands if the next format specifier is 'M' (fcmp
4714 condition completer).
4716 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4718 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4719 single number giving a bitmask for the MB and ME fields of an M
4720 form instruction. Change NB to accept 32, and turn it into 0;
4721 also turn 0 into 32 when disassembling. Seperated SH from NB.
4722 (insert_mbe, extract_mbe): New functions.
4723 (insert_nb, extract_nb): New functions.
4724 (SC_MASK): Mask out SA and LK bits.
4725 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4726 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4727 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4728 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4729 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4730 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4731 (powerpc_macros): Define table of macro definitions.
4732 (powerpc_num_macros): Define.
4734 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4735 if PPC_OPERAND_NEXT is set.
4737 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4739 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4740 char. Retrieve contents using bfd_getl32 instead of shifting.
4742 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4744 * ppc-opc.c: New file. Opcode table for PowerPC, including
4745 opcodes for POWER (RS/6000).
4746 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4747 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4748 (CFILES): Add ppc-dis.c.
4749 (ppc-dis.o, ppc-opc.o): New targets.
4750 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4752 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4754 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4755 No space before 'u', 'f', or 'N'.
4757 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4759 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4760 farther than we should.
4762 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4764 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4766 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4768 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4770 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4771 needs it, to prevent reading past the end of a section.
4773 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4775 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4776 Removed t,A case for la; always use t,A(b) case.
4778 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4780 From Ted Lemen <mellon@pepper.ncd.com>
4781 * mips-dis.c (print_insn_arg): Handle 'k'.
4782 * mips-opc.c: Make cache use k, not t.
4784 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4786 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4787 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4788 FLOAT_FORMAT_CODE to put out floating point register names.
4790 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4792 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4794 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4796 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4798 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4800 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4801 larger than 32. Moved dsxx32 variants first for disassembler.
4803 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4805 * z8kgen.c, z8k-opc.h: Add full lda information.
4807 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4809 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4810 movb instructions. Any necessary space will be emitted by
4811 the code to handle nullification completers.
4813 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4815 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4817 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4819 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4820 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4822 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4824 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4826 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4828 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4829 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4831 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4833 * m88k-dis.c (m88kdis): comment change. Remove space after
4835 (printop): handle new arg types DEC and XREG for m88110.
4837 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4839 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4840 type for absolute branch addresses. Delete special
4841 "ble" and "be" code in 'W' operand code.
4843 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4845 * mips-opc.c: Set hazard information correctly for branch
4846 likely instructions.
4848 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4850 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4851 info->fprintf_func for printing and info->print_address_func for
4854 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4856 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4858 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4860 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4861 Corrected second case of "b" for disassembler.
4863 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4865 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4866 to BFD swapping routines to correspond to BFD name changes.
4868 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4870 * mips-opc.c: Change div machine instruction to be z,s,t rather
4871 than s,t. Change div macro to be d,v,t rather than d,s,t.
4872 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4873 rem and remu which generates only the corresponding div
4874 instruction. This is for compatibility with the MIPS assembler,
4875 which only generates the simple machine instruction when an
4876 explicit destination of $0 is used.
4877 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4879 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4881 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4882 WR_31 hazard for bal, bgezal, bltzal.
4884 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4886 * hppa-dis.c (print_insn_hppa): Use print function
4887 from within the disassemble_info, not fprintf_filtered.
4889 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4891 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4892 Law, law@cs.utah.edu.)
4894 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4896 * mips-opc.c ("absu"): Removed.
4899 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4901 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4902 Changed hazard information to distinguish between memory load
4903 delays and coprocessor load delays.
4905 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4907 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4909 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4911 * configure.in: Don't pass cpu to config.bfd.
4913 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4915 * m88k-dis.c (m88kdis): Make class unsigned.
4917 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4919 * alpha-dis.c (print_insn_alpha): One branch format case was
4920 missing the instruction name.
4922 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4924 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4925 Add the arch-specific auxiliary files.
4926 (OFILES): Remove the arch-specific auxiliary files
4927 and use BFD_MACHINES instead of DIS_LIBS.
4928 * configure.in: Set BFD_MACHINES based on --with-targets option.
4930 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4932 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4935 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4937 * sparc-opc.c: Change CONST to const to deal with gcc
4938 -Dconst=__const -traditional.
4940 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4942 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4943 coprocessor instructions out of #if 0, and made them use new
4946 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4948 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4950 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4952 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4953 instruction, for use by the disassembler.
4955 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4956 hand-coded sign extensions that depended on 32-bit host ints.
4957 FIXME, we still depend on big-endian host bitfield ordering.
4958 (sparc_print_insn): Set the insn_info_valid field, and the
4959 other fields that describe the instruction being printed.
4961 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4963 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4964 `jmp' instead of just one of them.
4966 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4968 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4969 (fput_fp_reg_r): Renamed from fput_reg_r.
4970 (fput_fp_reg): New function.
4971 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4973 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4975 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4977 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4979 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4981 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4982 don't output a space.
4984 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4986 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4988 * mips-opc.c: New file, containing opcode table from
4989 ../include/opcode/mips.h.
4990 * Makefile.in: Add it.
4992 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4994 * m88k-dis.c: New file, moved in from gdb and changed to use the
4995 new dis-asm.h disassembler interface.
4996 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4997 (m88k-dis.o): New target.
4999 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5001 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5002 argument string const char * to correspond to opcode/mips.h.
5004 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5006 * mips-dis.c: Updated to account for name changes in new version
5008 * Makefile.in: Added header file dependencies.
5010 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5012 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5014 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5016 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5017 extend, rather than shifts.
5019 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5021 * Makefile.in: Undo 15 June change.
5023 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5025 * m68k-dis.c (print_insn_arg): Change return value to byte count
5027 * m68k-dis.c: Re-write to detect invalid operands before
5028 printing anything, so we can handle this the same way we
5029 handle invalid opcodes.
5031 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5033 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5035 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5037 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5040 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5042 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5044 * configure.in: Do make sysdep.h link.
5045 * Makefile.in: Search ../include. Don't search ../bfd.
5047 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5049 Changes from Jeff Law, law@cs.utah.edu:
5050 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5051 Do not print a space before the completers specified by
5054 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5056 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5057 defined, since gdb has been fixed.
5059 Changes from Jeff Law, law@cs.utah.edu:
5060 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5061 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5062 be a *disassemble_info, not a *FILE.
5063 * hppa-dis.c: Support 'd', '!', and 'a'.
5064 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5065 * hppa-dis.c: Delete cases which are no longer needed.
5067 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5069 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5071 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5073 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5076 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5078 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5079 * configure.in: No longer need to configure to get sysdep.h.
5081 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5083 * Patches from Jeffrey Law <law@cs.utah.edu>.
5084 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5085 templates for 1.1 FP computational instructions.
5087 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5089 * h8500-dis.c (print_insn_h8500): Address argument is type
5091 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5094 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5095 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5097 * sparc-dis.c (compare_opcodes): Move static declaration to
5100 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5102 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5103 instruction, remove unimp hack from 'l' argument.
5105 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5107 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5110 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5112 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5113 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5116 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5118 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5119 arrays of string pointers to 2-d arrays of chars, to save
5122 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5124 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5125 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5127 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5129 * hppa-dis.c: New file from Utah, adapted to new disassembler
5131 * Makefile.in: Include it.
5133 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5135 * sh-dis.c, sh-opc.h: New files.
5137 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5139 * alpha-dis.c, alpha-opc.h: New files.
5141 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5143 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5146 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5148 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5150 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5152 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5155 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5157 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5158 and double percent signs a few places.
5160 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5162 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5163 Use info->print_address_func not print_address.
5165 * dis-buf.c (generic_print_address): New function.
5167 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5169 * Makefile.in: Add sparc-dis.c.
5170 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5172 Add `add' instruction to the set that get checked
5173 for a preceding `sethi' in order to print an absolute address.
5174 * (print_insn): Disassembly prefers real instructions.
5175 (is_delayed_branch): Speed up.
5176 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5177 Still missing some float ops, and needs testing.
5178 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5179 F_ALIAS. Use printf, not fprintf, when not passing a file
5181 (compare_opcodes): Check that identical instructions have
5182 identical opcodes, complain otherwise.
5185 * Include reg_names.
5187 Use dis-asm.h/read_memory_func interface.
5189 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5191 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5192 deliberately return non-zero to setjmp from longjmp. Otherwise
5193 this code fails to compile.
5195 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5197 * m68k-dis.c: Fix prototype for fetch_arg().
5199 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5201 * dis-buf.c: New file, for new read_memory_func interface.
5202 Makefile.in (OFILES): Include it.
5203 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5204 Use new read_memory_func interface.
5206 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5208 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5209 * h8500-opc.h: Fix couple of opcodes.
5211 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5213 * Makefile.in: add dvi & installcheck targets
5215 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5217 * Makefile.in: Update for h8500-dis.c.
5219 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5221 * h8500-dis.c, h8500-opc.h: New files
5223 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5225 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5226 ../include/dis-asm.h.
5227 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5228 and ../gdb/m68k-pinsn.c).
5229 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5230 and ../gdb/i386-pinsn.c).
5231 * m68881-ext.c: New file. Moved definition of
5232 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5233 * Makefile.in: Adjust for new files.
5234 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5235 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5236 can be dis-assembled.
5238 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5240 * mips-dis.c (print_insn_arg): Now returns void.
5242 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5244 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5245 files that use the macros.
5247 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5249 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5250 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5251 (CFILES): Added mips-dis.c.
5253 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5255 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5256 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5258 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5260 * Makefile.in: Improve *clean rules.
5261 * configure.in: Allow a default host.
5263 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5265 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5266 files include other sysdep files
5268 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5270 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5272 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5274 * configure.in: For host support, use ../bfd/configure.host
5275 so it stays in sync with the ../bfd/hosts database.
5277 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5279 * configure.in: use cpu-vendor-os triple instead of nested cases
5281 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5283 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5284 *always* the wrong one.
5286 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5288 * z8kgen.c: added copyright info
5290 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5292 * z8k-dis.c (unparse_instr): prettier tabs
5293 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5295 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5297 * configure.in: Add ncr* configuration.
5298 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5299 picayune ANSI compilers happy.
5301 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5303 * configure.in (i386): Make i386 and i486 synonymous for now.
5304 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5306 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5308 * Makefile.in (install): Fix typo.
5310 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5312 * Makefile.in (make): Remove obsolete crud.
5313 (sparc-opc.o): Avoid Sun Make VPATH bug.
5315 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5317 * Makefile.in: since there are no SUBDIRS, remove rule and
5318 references of subdir_do.
5320 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5322 * Makefile.in (install): Get the library name right here too.
5323 Don't install bfd.h, since it's unrelated to this library. No
5324 subdirs to recurse into, either.
5325 (CFILES): The source file has a .c suffix, not .o.
5327 * sparc-opc.c: New file, moved from BFD.
5328 * Makefile.in (OFILES): Build it.
5330 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5332 * z8k-dis.c: fixed forward refferences of some declarations.
5334 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5336 * Makefile.in: get the name of the library right
5338 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5340 * z8k-dis.c: knows how to disassemble z8k stuff
5341 * z8k-opc.h: new file full of z8000 opcodes
5345 version-control: never
projects / deliverable / binutils-gdb.git / blob