sim/ChangeLog

   1 2013-06-21  Nick Clifton  <nickc@redhat.com>
   2
   3         * msp430: New Directory.
   4         * configure.tgt: Add it.
   5         * configure: Regenerate.
   6
   7 2013-03-15  Steve Ellcey  <sellcey@mips.com>
   8
   9         * arm/wrapper.c (sim_complete_command): Make char arguments const.
  10         * avr/interp.c (sim_complete_command): Ditto.
  11         * common/sim-options.c (sim_complete_command): Ditto.
  12         * cr16/interp.c (sim_complete_command): Ditto.
  13         * erc32/interf.c (sim_complete_command): Ditto.
  14         * m32c/gdb-if.c (sim_complete_command): Ditto.
  15         * microblaze/interp.c (sim_complete_command): Ditto.
  16         * ppc/sim_calls.c (sim_complete_command): Ditto.
  17         * rl78/gdb-if.c (sim_complete_command): Ditto.
  18         * rx/gdb-if.c (sim_complete_command): Ditto.
  19         * sh/interp.c (sim_complete_command): Ditto.
  20
  21 2013-01-01  Joel Brobecker  <brobecker@adacore.com>
  22
  23         Update year range in copyright notice of all files.
  24
  25 2012-12-19  Joel Brobecker  <brobecker@adacore.com>
  26
  27         Update old contact info in GPL license notices.
  28
  29 2012-12-19  Joel Brobecker  <brobecker@adacore.com>
  30
  31         Update the non-FSF-copyrighted files in sim to GPLv3 or later.
  32
  33 2012-11-20  Pavel Chupin  <pavel.v.chupin@intel.com>
  34
  35         * common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS
  36         condition.
  37         * common/acinclude.m4: Define lt_cv_dlopen_libs.
  38         * arm/configure: Regenerate.
  39         * avr/configure: Regenerate.
  40         * bfin/configure: Regenerate.
  41         * common/configure: Regenerate.
  42         * cr16/configure: Regenerate.
  43         * cris/configure: Regenerate.
  44         * d10v/configure: Regenerate.
  45         * erc32/configure: Regenerate.
  46         * frv/configure: Regenerate.
  47         * h8300/configure: Regenerate.
  48         * igen/configure: Regenerate.
  49         * iq2000/configure: Regenerate.
  50         * lm32/configure: Regenerate.
  51         * m32c/configure: Regenerate.
  52         * m32r/configure: Regenerate.
  53         * m68hc11/configure: Regenerate.
  54         * mcore/configure: Regenerate.
  55         * microblaze/configure: Regenerate.
  56         * mips/configure: Regenerate.
  57         * mn10300/configure: Regenerate.
  58         * moxie/configure: Regenerate.
  59         * ppc/configure: Regenerate.
  60         * rl78/configure: Regenerate.
  61         * rx/configure: Regenerate.
  62         * sh/configure: Regenerate.
  63         * sh64/configure: Regenerate.
  64         * testsuite/configure: Regenerate.
  65         * v850/configure: Regenerate.
  66
  67 2012-11-05  Stephane Carrez  <Stephane.Carrez@gmail.com>
  68
  69         * MAINTAINERS: Update my email address.
  70
  71 2012-09-24  Steve Ellcey  <sellcey@mips.com>
  72
  73         * mips/basic.exp: Add mips*-mti-elf* target.
  74         * configure.ac: Add mips*-mti-elf* target.
  75         * configure: Regenerate.
  76
  77 2012-06-15  Joel Brobecker  <brobecker@adacore.com>
  78
  79         * configure: Regenerate.
  80
  81 2012-06-06  Michael Eager  <eager@eagercon.com>
  82
  83         * microblaze/interp.c (config.h): Add #include.
  84
  85 2011-11-29  Joel Brobecker  <brobecker@adacore.com>
  86
  87         * MAINTAINERS (Global Maintainers): New section.  Add Mike
  88         Frysinger.
  89
  90 2011-11-28  DJ Delorie  <dj@redhat.com>
  91
  92         * configure.tgt: Add rl78 support.
  93         * configure: Regenerate.
  94         * rl78: New directory.
  95         * MAINTAINERS: Add myself as RL78 maintainer.
  96
  97 2011-07-08  Hans-Peter Nilsson  <hp@axis.com>
  98
  99         * MAINTAINERS: Remove Thiemo Seufer.
 100
 101 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
 102
 103         * configure.tgt (bfin-*-*): Add sim_testsuite=yes.
 104         * configure: Regenerate.
 105
 106 2011-05-04  Joseph Myers  <joseph@codesourcery.com>
 107
 108         * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
 109         handle targets.
 110         * configure: Regenerate.
 111
 112 2011-03-05  Mike Frysinger  <vapier@gentoo.org>
 113
 114         * MAINTAINERS: Add bfin entry.
 115         * configure.tgt (bfin-*-*): Handle bfin targets.
 116         * configure: Regenerate.
 117
 118 2011-01-05  Mike Frysinger  <vapier@gentoo.org>
 119
 120         * .gitignore: Add /*/hw-config.h.
 121
 122 2010-12-23  Mike Frysinger  <vapier@gentoo.org>
 123
 124         * .gitignore: New file.
 125
 126 2010-07-28  DJ Delorie  <dj@redhat.com>
 127
 128         * MAINTAINERS: Add self as RX maintainer.  Sort list.
 129
 130 2010-06-08  Nick Clifton  <nickc@redhat.com>
 131
 132         * reg.c (set_oszc): Use unsigned int for the mask.
 133         (set_szc, set_osz, set_sz): Likewise.
 134
 135 2010-04-26  Mike Frysinger  <vapier@gentoo.org>
 136
 137         * configure.ac: Target logic moved out to and included from ...
 138         * configure.tgt: ... this new file.
 139         * configure: Regenerated.
 140
 141 2010-04-12  Mike Frysinger  <vapier@gentoo.org>
 142
 143         * README-HACKING: Add more sections.
 144
 145 2010-02-11  Doug Evans  <dje@sebabeach.org>
 146
 147         * cris/cpuv10.h, * cris/cpuv32.h, * cris/cris-desc.c,
 148         * cris/cris-desc.h, * cris/decodev10.c, * cris/decodev32.c,
 149         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
 150         * cris/semcrisv32f-switch.c: Regenerate.
 151
 152 2010-01-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 153
 154         * avr/configure: Regenerate.
 155         * cris/configure: Regenerate.
 156         * microblaze/configure: Regenerate.
 157
 158 2010-01-02  Doug Evans  <dje@sebabeach.org>
 159
 160         * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c,
 161         * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c,
 162         * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c,
 163         * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h,
 164         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
 165         * cris/semcrisv32f-switch.c: Regenerate, update copyright year.
 166
 167 2010-01-01  Doug Evans  <dje@sebabeach.org>
 168
 169         * cris/mloop.in: Fix copyright year update snafu.
 170
 171 2009-11-24  Joel Brobecker  <brobecker@adacore.com>
 172
 173         * common/aclocal.m4: Add include of ../../config/zlib.m4.
 174         * common/common.m4: Use AM_ZLIB to check for zlib support.
 175         * ppc/configure.ac: Likewise.
 176         * arm/configure, avr/configure, common/configure, cr16/configure,
 177         cris/configure, d10v/configure, erc32/configure, frv/configure,
 178         h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
 179         m32r/configure, m68hc11/configure, mcore/configure,
 180         microblaze/configure, mips/configure, mn10300/configure,
 181         moxie/configure, ppc/configure, sh/configure, sh64/configure,
 182         v850/configure: Regenerate.
 183
 184 2009-11-24  DJ Delorie  <dj@redhat.com>
 185
 186         * rx: New directory.
 187         * configure.ac: Add entry for Renesas RX.
 188         * configure: Regenerate.
 189
 190 2009-11-22  Doug Evans  <dje@sebabeach.org>
 191
 192         * cris/cpuall.h: Regenerate.
 193         * cris/cpuv10.h: Regenerate.
 194         * cris/cpuv32.h: Regenerate.
 195         * cris/decodev10.c: Regenerate.
 196         * cris/decodev10.h: Regenerate.
 197         * cris/decodev32.c: Regenerate.
 198         * cris/decodev32.h: Regenerate.
 199
 200 2009-11-12  Tristan Gingold  <gingold@adacore.com>
 201
 202         * avr/interp.c (sim_write): Allow byte access.
 203         (sim_read): Ditto.
 204
 205 2009-11-12  Tristan Gingold  <gingold@adacore.com>
 206
 207         * avr/interp.c (sim_load): Clear memory before loading.
 208
 209 2009-11-09  Tristan Gingold  <gingold@adacore.com>
 210
 211         * avr/interp.c (sim_resume): Fix typo for OP_ret.
 212
 213 2009-10-23  Doug Evans  <dje@sebabeach.org>
 214
 215         * cris/arch.c: Regenerate.
 216         * cris/arch.h: Regenerate.
 217         * cris/cpuall.h: Regenerate.
 218         * cris/cpuv10.c: Regenerate.
 219         * cris/cpuv10.h: Regenerate.
 220         * cris/cpuv32.c: Regenerate.
 221         * cris/cpuv32.h: Regenerate.
 222         * cris/cris-desc.c: Regenerate.
 223         * cris/cris-desc.h: Regenerate.
 224         * cris/cris-opc.h: Regenerate.
 225         * cris/decodev10.c: Regenerate.
 226         * cris/decodev10.h: Regenerate.
 227         * cris/decodev32.c: Regenerate.
 228         * cris/decodev32.h: Regenerate.
 229         * cris/modelv10.c: Regenerate.
 230         * cris/modelv32.c: Regenerate.
 231         * cris/semcrisv10f-switch.c: Regenerate.
 232         * cris/semcrisv32f-switch.c: Regenerate.
 233
 234 2009-10-22  Tristan Gingold  <gingold@adacore.com>
 235
 236         * avr/interp.c (sim_stop): Return 1.
 237
 238 2009-10-16  Doug Evans  <dje@sebabeach.org>
 239
 240         * MAINTAINERS: Add myself as m32r maintainer.
 241
 242 2009-10-15  Michael Egaer  <eager@eagercon.com>
 243
 244         * MAINTAINERS: Add self as MicroBlaze maintainer.
 245
 246 2009-10-14  Ben Elliston  <bje@gnu.org>
 247
 248         * MAINTAINERS (common): Move myself to "past maintainers" section.
 249
 250 2009-10-06  Michael Eager  <eager@eagercon.com>
 251
 252         * microblaze/interp.c: Add include microblaze-dis.h.
 253
 254 2009-09-23  Michael Eager  <eager@eagercon.com>
 255
 256         * configure: Add microblaze-*.* (not regenerated).
 257         * configure.ac: Likewise.
 258         * microblaze/config.in: New.
 259         * microblaze/configure: Generate.
 260         * microblaze/configure.ac: New.
 261         * microblaze/interp.c: New.
 262         * microblaze/Makefile.in: New.
 263         * microblaze/microblaze.h: New.
 264         * microblaze/microblaze.isa: New.
 265         * microblaze/sim-main.h: New.
 266         * microblaze/sysdep.h: New.
 267
 268 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 269
 270         * avr/config.in: Regenerate.
 271         * avr/configure: Likewise.
 272         * configure: Likewise.
 273         * cris/config.in: Likewise.
 274         * cris/configure: Likewise.
 275
 276         * configure.ac: m4_include toplevel config/override.m4.
 277         * configure: Regenerate.
 278         * avr/configure: Regenerate.
 279         * cris/configure: Regenerate.
 280
 281 2009-07-30  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 282
 283         * Makefile.in (datarootdir): New variable.
 284
 285 2009-05-18  Jon Beniston <jon@beniston.com>
 286
 287         * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
 288         * configure.ac: Add lm32 target.
 289         * lm32: New directory.
 290
 291 2009-05-11  Andrew Cagney  <cagney@gnu.org>
 292
 293         * MAINTAINERS: Orphan ppc.
 294
 295 2009-05-08  Kevin Buettner  <kevinb@redhat.com>
 296
 297         * m32c/gdb-if.c (m32c_signal_to_host): Rename to
 298         m32c_signal_to_target.  Change signal return values from SIGILL,
 299         SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
 300         TARGET_SIGNAL_SEGV, etc.  Fix all callers.
 301
 302 2009-04-30  Anthony Green  <green@moxielogic.com>
 303
 304         * MAINTAINERS: Add myself for the moxie port.
 305         * moxie: New directory.
 306         * configure.ac: Add entry for moxie.
 307         * configure: Regenerate.
 308
 309 2009-04-27  Tristan Gingold  <gingold@adacore.com>
 310
 311         * avr: New directory.
 312         * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
 313         * avr/config.in: New file, generated by autoheader.
 314         * avr/configure: New file generated by autoconf.
 315         * configure.ac: Add avr.
 316         * configure: Regenerated.
 317
 318 2009-04-17  Carlos O'Donell  <carlos@codesourcery.com>
 319
 320         * Makefile.in: Add dummy install-pdf, html, and
 321         install-html targets.
 322
 323 2009-01-18  Hans-Peter Nilsson  <hp@axis.com>
 324
 325         * cris/sim-if.c: Include errno.h.
 326         (cris_start_address, cris_program_offset): New variables.
 327         (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
 328         enums.
 329         (cris_options): New options --cris-program-offset and
 330         --cris-start-address.
 331         (cris_option_handler): Handle new options.
 332         (cris_program_offset_write, cris_set_section_offset_iterator)
 333         (cris_offset_sections, cris_offset_sections): New functions.
 334         (sim_load): Use cris_program_offset_write as function argument to
 335         cris_load_elf_file, not sim_write.
 336         (struct offsetinfo): New struct.
 337         (cris_handle_interpreter): Fix typo in comment.
 338         (sim_open): Call cris_offset_sections as soon as the bfd of the
 339         infile is available.  Gate bfd validity checks on abfd non-NULL.
 340         (sim_create_inferior): Let cris_start_address when != -1 override
 341         other start-address choices.
 342
 343 2009-01-06  Hans-Peter Nilsson  <hp@axis.com>
 344
 345         * cris/traps.c (abort): Define to call sim_io_error.
 346         (create_map): Make -1 imply a non-fixed address, not 0.  All
 347         callers changed.  Only prefer the next higher unmapped address if
 348         the last mapped address is no less than 0x40000000.  Check that
 349         the address to be mapped is not already mapped.  Update head
 350         comment.
 351         (unmap_pages): Don't call abort when recursive call fails, just
 352         note and return an error if a page in the range couldn't be unmapped.
 353         (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
 354         (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
 355         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 356         non-MAP_FIXED argument overlapping existing map.  For MAP_FIXED,
 357         don't abort on page not being mapped.  Handle non-anon filemap
 358         with length padded to pagesize.
 359
 360 2009-01-03  Hans-Peter Nilsson  <hp@axis.com>
 361
 362         * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
 363         (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
 364         (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
 365         (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
 366         (TARGET_AT_CLKTCK): Remove redundant macros.
 367         (AUX_ENT): Adjust to use standard ELF AT_* macros.
 368         (AUX_ENTF): Ditto.  Remove always-0 middle argument.  Update all
 369         callers.
 370         (sim_open): Also pass AT_SECURE.
 371
 372         * cris/sim-main.h (struct _sim_cpu): New member
 373         set_target_thread_data.
 374         * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
 375         * cris/crisv10f.c: Ditto.
 376         * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
 377         (MY (f_specific_init)): Set new _sim_cpu member to new function.
 378         * cris/traps.c (TARGET_SYS_set_thread_area): Define.
 379         (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
 380         case.
 381
 382         * cris/traps.c (TARGET_SYS_exit_group): Define.
 383         (cris_break_13_handler): Handle it like the exit for the last
 384         thread.
 385
 386         * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
 387         (TARGET_EPOCH): Update to match TARGET_UTSNAME.  Correct comment.
 388         (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
 389         2.6.27.  Set machine field to the BFD printable name of the
 390         machine.
 391
 392         * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
 393         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 394         TARGET_MAP_DENYWRITE.
 395
 396         * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
 397         (TARGET_X_OK, TARGET_F_OK): Define.
 398         (cris_break_13_handler) <case TARGET_SYS_access>: New case.
 399
 400         * cris/semcrisv32f-switch.c: Regenerate.
 401
 402 2008-12-30  Hans-Peter Nilsson  <hp@axis.com>
 403
 404         * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
 405         just a short CRIS-specific notice.  Tweak the wording for a
 406         failing architecture test.
 407
 408         * cris/traps.c (TARGET_SYS_writev): New macro.
 409         (is_mapped_only, cris_dump_map): New functions.
 410         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
 411         and prot combinations and a non-zero page-offset.  If
 412         TARGET_MAP_FIXED, unmap pages before mapping them.
 413         <case TARGET_SYS_mprotect>: When checking, allow any length
 414         argument.  Don't actually do anything.
 415         <case TARGET_SYS_writev>: New case.
 416
 417         * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
 418         * cris/sim-if.c: Include elf-bfd.h.
 419         (struct progbounds): New members end_loadmem, start_nonloadmem.
 420         (xprintf, eprintf): New functions, copied from common/sim-load.c.
 421         (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
 422         (get_progbounds_iterator): Renamed from get_progbounds.  Make
 423         static.  Update head comment.  Set new struct progbounds members.
 424         (exec_load_addr, interp_load_addr, interp_start_addr): New static
 425         variables.
 426         (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
 427         (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
 428         functions.
 429         (sim_open): New constant array auxv_entries.  Rewrite AUX_ENT
 430         handling to use auxv_entries.  Improve error message and checking
 431         for invalid programs.  Use new variable abfd for the program
 432         instead of for each access reaching into sd to get it.
 433         (sim_create_inferior): If non-zero, use interp_start_addr instead
 434         of the program start address.
 435         (cris_disassemble_insn): Remove incorrect and unclear, supposedly
 436         stale comment.  Always specify little-endian.
 437
 438 2008-07-29  Nick Clifton  <nickc@redhat.com>
 439
 440         * common/genmloop.sh: Add new parameter: -shell to specify the
 441         command interpreter to use to run the input file.  This is
 442         necessary because otherwise SHELL is taken from the user's
 443         environment, and not from the makefile that invoked this script
 444         and the user might not be running an sh-like shell.
 445         * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
 446         * fr30/Makefile.in: Likewise.
 447         * frv/Makefile.in: Likewise.
 448         * i960/Makefile.in: Likewise.
 449         * iq2000/Makefile.in: Likewise.
 450         * m32r/Makefile.in: Likewise.
 451
 452         * frv/mloop.in: Add missing start of line comment marker.
 453
 454 2008-07-11  Hans-Peter Nilsson  <hp@axis.com>
 455
 456         * cris/configure: Regenerate to track ../common/common.m4 changes.
 457         * cris/config.in: Ditto.
 458
 459 2008-06-06  Vladimir Prus  <vladimir@codesourcery.com>
 460             Daniel Jacobowitz  <dan@codesourcery.com>
 461             Joseph Myers  <joseph@codesourcery.com>
 462
 463         * cris/configure: Regenerate.
 464
 465 2008-05-09  Olivier Hainque  <hainque@adacore.com>
 466
 467         * ppc/altivec.igen (vperm): Latch inputs into temporaries.
 468
 469 2008-03-25  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 470
 471         * MAINTAINERS: Add myself as maintainer of cr16 port.
 472
 473 2008-02-12  M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
 474
 475         Add simulator for National cr16 processor.
 476         * cr16: New directory.
 477         * configure.ac: Add entry for National cr16.
 478         * configure: Regenerate.
 479
 480 2008-02-05  DJ Delorie  <dj@redhat.com>
 481
 482         * configure.ac (v850): V850 now has a testsuite.
 483         * configure (v850): Likewise.
 484
 485 2008-01-01  Daniel Jacobowitz  <dan@codesourcery.com>
 486
 487         Updated copyright notices for most files.
 488
 489 2007-12-19  DJ Delorie  <dj@redhat.com>
 490
 491         * frv/frv.c (frvbf_cut): Only look at the six LSBs of
 492         cut_point.
 493
 494 2007-10-22  Hans-Peter Nilsson  <hp@axis.com>
 495
 496         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 497         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 498         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 499         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 500         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 501         cris/semcrisv32f-switch.c: Regenerate.
 502
 503 2007-08-24  Joel Brobecker  <brobecker@adacore.com>
 504
 505         Switch the license of all files explicitly copyright the FSF
 506         to GPLv3.
 507
 508 2007-03-27  Brooks Moses  <brooks.moses@codesourcery.com>
 509
 510         * Makefile.in: Add dummy "pdf" target.
 511
 512 2007-02-20  Hans-Peter Nilsson  <hp@axis.com>
 513
 514         * cris/traps.c (dump_statistics): Change format for cycle numbers
 515         to %llu and cast parameters to unsigned long long.
 516
 517 2007-02-16  Thiemo Seufer  <ths@mips.com>
 518
 519         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
 520
 521 2007-01-28  Manuel Lauss  <slauss@resi.at>
 522
 523         * configure.ac (sh64-*-*): Change to sh64*-*-*.
 524         (sh-*-*): Change to sh*-*-*.
 525         * configure: Regenerated.
 526
 527 2007-01-09  Daniel Jacobowitz  <dan@codesourcery.com>
 528
 529         Updated copyright notices for most files.
 530
 531 2006-12-20  Hans-Peter Nilsson  <hp@axis.com>
 532
 533         * Makefile.in (autoconf-common autoheader-common): Only run
 534         autoheader on subdirs with a file config.in.
 535
 536         * configure.ac (common): Make the default "yes" for all targets
 537         with sim subdirs.
 538         * configure: Regenerate.
 539
 540         * Makefile.in (autoconf-common autoheader-common): In documented
 541         usage, say SHELL=/bin/sh.
 542         (.PHONY): Add autoheader-common.
 543
 544         * MAINTAINERS: Add self as authorized committer for *.
 545
 546 2006-10-02  Edgar E. Iglesias  <edgar@axis.com>
 547             Hans-Peter Nilsson  <hp@axis.com>
 548
 549         * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
 550         (cris_unknown_syscall_action): Declare.
 551         * cris/sim-if.c (cris_unknown_syscall_action): Define.
 552         (cris_options): Add cris-unknown-syscall option.
 553         (cris_option_handler): Correct comment about and error message for
 554         invalid --cris-cycles argument.  Handle --cris-unknown-syscall.
 555         * cris/traps.c: Include stdarg.h
 556         (cris_unknown_syscall): New function.
 557         (cris_break_13_handler): Instead of sim_io_eprintf and
 558         sim_engine_halt, call cris_unknown_syscall to handle more or less
 559         unknown syscalls.  Adjust code as necessary to handle return
 560         value.
 561
 562 2006-09-30  Daniel Jacobowitz  <dan@codesourcery.com>
 563
 564         * MAINTAINERS: Add Dave Brolley for sh64.
 565
 566 2006-09-30  Hans-Peter Nilsson  <hp@axis.com>
 567
 568         * cris/traps.c (TARGET_PIPE_BUF): New macro.
 569         (cris_pipe_empty): Correct initialization of "remaining".  Only
 570         adjust the "write" return value if more than TARGET_PIPE_BUF bytes
 571         are written.
 572
 573 2006-09-29  Hans-Peter Nilsson  <hp@axis.com>
 574
 575         * cris/configure.ac: Check for limits.h and sys/param.h.
 576         * cris/configure, cris/config.in: Rebuild.
 577         * cris/traps.c (SIM_PATHMAX): New macro.
 578         (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
 579
 580 2006-08-08  Joel Sherrill <joel.sherrill@oarcorp.com>
 581
 582         * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
 583         * Makefile.in (FLAGS_TO_PASS): Include libdir.
 584         * configure: Regenerated.
 585
 586 2006-06-05  Daniel Jacobowitz  <dan@codesourcery.com>
 587
 588         * cris/configure: Regenerated.
 589
 590 2006-05-31  Daniel Jacobowitz  <dan@codesourcery.com>
 591
 592         * cris/configure: Regenerated.
 593
 594 2006-05-05  Andreas Schwab  <schwab@suse.de>
 595
 596         * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
 597         * configure: Regenerate.
 598
 599         * Makefile.in (CFLAGS_FOR_BUILD): Define.
 600         (CC_FOR_BUILD): Don't override.
 601         (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
 602
 603 2006-05-04  Daniel Jacobowitz  <dan@codesourcery.com>
 604
 605         * MAINTAINERS: Add an "Authorized committers" section, and list
 606         DJ Delorie for v850.
 607
 608 2006-04-08  Hans-Peter Nilsson  <hp@axis.com>
 609
 610         * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
 611
 612 2006-04-03  Hans-Peter Nilsson  <hp@axis.com>
 613
 614         * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
 615         * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
 616         (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
 617         (all): Depend on rvdummy$(EXEEXT).
 618         * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS.  Check for
 619         sys/socket.h and sys/select.h.  Call SIM_AC_OPTION_HARDWARE,
 620         default off.
 621         * cris/configure: Regenerate.
 622         * cris/cris-sim.h (cris_have_900000xxif): Declare here.
 623         (enum cris_interrupt_type, crisv10deliver_interrupt)
 624         (crisv32deliver_interrupt: New declarations.
 625         * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
 626         sim_events_tickn and set state-events member work_pending when it's
 627         time for the next event.
 628         [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
 629         interrupt-delivery function.
 630         * cris/crisv10f.c (MY (deliver_interrupt)): New function.
 631         * cris/crisv32f.c (MY (deliver_interrupt)): New function.
 632         * cris/devices.c: Include hw-device.h.
 633         (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
 634         (device_io_write_buffer): Only perform 0x900000xx-functions if
 635         cris_have_900000xxif is nonzero.  Else if WITH_HW defined,
 636         call hw_io_write_buffer.  Add return 0 last in function.
 637         * cris/sim-if.c (cris_have_900000xxif): Now global.
 638         (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
 639         Force "-model" option, effectively.
 640         * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
 641         (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
 642
 643 2006-04-02  Hans-Peter Nilsson  <hp@axis.com>
 644
 645         * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
 646         (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
 647         (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
 648
 649 2006-03-13  DJ Delorie  <dj@redhat.com>
 650
 651         * MAINTAINERS: Add self as m32c sim maintainer.
 652
 653 2006-02-23  Hans-Peter Nilsson  <hp@axis.com>
 654
 655         * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
 656         mapping.
 657         (cris_break_13_handler) <case TARGET_SYS_time>: New case.
 658
 659 2006-01-23  Jim Blandy  <jimb@redhat.com>
 660
 661         Add simulator for Renesas M32C and M16C.
 662
 663         * m32c: New directory.
 664         * configure.ac: Add entry for Renesas M32C.
 665         * configure: Regenerate.
 666
 667 2006-01-10  Hans-Peter Nilsson  <hp@axis.com>
 668
 669         * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
 670         cycle count for the current insn.
 671
 672 2005-12-06  Hans-Peter Nilsson  <hp@axis.com>
 673
 674         * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
 675         cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
 676         cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
 677         cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
 678
 679 2005-12-05  Hans-Peter Nilsson  <hp@axis.com>
 680
 681         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 682         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 683         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 684         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 685         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 686         cris/semcrisv32f-switch.c: Regenerate.
 687
 688 2005-11-20  Hans-Peter Nilsson  <hp@axis.com>
 689
 690         * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
 691         (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
 692         TARGET_O_WRONLY.
 693         (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
 694         F_GETFL on fd 0, 1 and 2.
 695
 696 2005-11-17  Hans-Peter Nilsson  <hp@axis.com>
 697
 698         * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
 699         last_open_fd, last_open_flags.
 700         * cris/traps.c: Don't include targ-vals.h.
 701         (TARGET_O_ACCMODE): Define.
 702         (cris_break_13_handler): Set new _sim_cpu members.
 703         <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
 704         Rearrange code as switch.  Emit "unimplemented" abort for
 705         unimplemented fcntl calls.
 706
 707         * cris/traps.c (TARGET_SYS_stat): Define.
 708         (syscall_stat32_map): Add entry for TARGET_SYS_stat.
 709         (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
 710
 711 2005-11-16  Hans-Peter Nilsson  <hp@axis.com>
 712
 713         * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
 714         low 32 bits are used after an unsigned long cast.
 715
 716 2005-05-28  Hans-Peter Nilsson  <hp@axis.com>
 717
 718         * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
 719
 720 2005-05-26  Chris Demetriou  <cgd@netbsd.org>
 721
 722         * MAINTAINERS: Update my mail address, move myself to the
 723         "Past maintainers" section.
 724
 725 2005-05-17  Corinna Vinschen  <vinschen@redhat.com>
 726
 727         * configure.ac: Add igen to v850 build.
 728         * configure: Regenerate.
 729
 730 2005-04-29  Paul Brook  <paul@codesourcery.com>
 731
 732         * common/callback.c (PIPE_BUF): Provide default definition.
 733         (os_lstat): Use stat if lstat is not available on the host.
 734         (os_ftruncate): Return EINVAL if not available on the host.
 735         (os_truncate): Ditto.
 736         * common/configure.ac: Check for lstat, truncate and ftruncate.
 737         * common/configure: Regenerate.
 738         * common/config.in: Regenerate.
 739
 740 2005-04-27  Paul Brook  <paul@codesourcery.com>
 741
 742         * common/Make-common.in: Add $(EXEEXT) to "run".
 743
 744 2005-04-18  Hans-Peter Nilsson  <hp@axis.com>
 745
 746         * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
 747         For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
 748         implemented.  In call to create_map, pad length argument to 8k.
 749
 750 2005-04-15  Corinna Vinschen  <vinschen@redhat.com>
 751
 752         * configure.ac: Add explicit sh64 case.
 753         * configure: Regenerate.
 754
 755 2005-03-30  Paul Brook  <paul@codesourcery.com>
 756
 757         * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
 758
 759 2005-03-24  Hans-Peter Nilsson  <hp@axis.com>
 760
 761         * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
 762         include cgen-ops.h in decodev10.c and decodev32.c.
 763         * cris/sim-main.h: Don't include cgen-ops.h here.
 764         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 765         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 766         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 767         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 768         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 769         cris/semcrisv32f-switch.c: Regenerate.
 770
 771         * cris/traps.c (cris_break_13_handler) <case
 772         TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
 773         sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
 774
 775 2005-03-23  Mark Kettenis  <kettenis@gnu.org>
 776
 777         * cris/configure: Regenerate.
 778
 779 2005-02-28  Jim Blandy  <jimb@redhat.com>
 780
 781         * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
 782         mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
 783         Regenerated, after change to common/aclocal.m4.
 784
 785 2005-02-18  Corinna Vinschen  <vinschen@redhat.com>
 786
 787         * iq2000: New target subdirectory.
 788         * configure.ac: Add iq2000 target.
 789         * configure: Regenerate.
 790
 791 2005-01-29  Hans-Peter Nilsson  <hp@axis.com>
 792
 793         * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
 794         (realclean, install): Fail if subdir make failed.
 795
 796 2005-01-28  Hans-Peter Nilsson  <hp@axis.com>
 797
 798         * cris: New directory, simulator for Axis Communications CRIS
 799         including CRIS v32, CGEN-based.
 800         * configure.ac: Add corresponding configury.
 801         * configure: Regenerate.
 802
 803 2005-01-17  Andrew Cagney  <cagney@gnu.org>
 804
 805         * configure.ac: For mips*-*-* and mn10300*-*-* configure the
 806         common directory.  Remove sparc*-*-* from list.
 807
 808 2005-01-11  Andrew Cagney  <cagney@gnu.org>
 809
 810         * Makefile.in (autoconf-common autoheader-common): Add --force to
 811         autoconf and autoheader.
 812         (autoconf-common autoheader-common)
 813         (autoconf-install autoheader-install): Check for configure.ac, not
 814         configure.in.
 815         * configure.ac: Delete AC_CONFIG_AUX_DIR.
 816         * configure: Re-generate.
 817
 818 2005-01-07  Andrew Cagney  <cagney@gnu.org>
 819
 820         * configure.ac: Replace configure.in.  Requires autoconf 2.59 and
 821         correctly calls AC_CONFIG_SUBDIRS.
 822         * configure: Re-generate.
 823
 824 2004-12-01  Andrew Cagney  <cagney@gnu.org>
 825
 826         * i960, h8500: Delete directory.
 827
 828 2004-11-12  Andrew Cagney  <cagney@gnu.org>
 829
 830         * d30v, fr30, mn10200, z8k: Delete directory.
 831
 832 2004-03-10  Ben Elliston  <bje@gnu.org>
 833
 834         * MAINTAINERS: Update my mail address.
 835
 836 2004-01-26  Chris Demetriou  <cgd@broadcom.com>
 837
 838         * configure.in (mips*-*-*): Configure in testsuite.
 839         * configure: Regenerate.
 840
 841 2003-10-08  Dave Brolley  <brolley@redhat.com>
 842
 843         * configure.in: Move frv handling to alphabetically correct placement.
 844
 845 2003-09-03  Andreas Schwab  <schwab@suse.de>
 846
 847         * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
 848
 849 2003-08-29  Dave Brolley  <brolley@redhat.com>
 850
 851         * MAINTAINERS: Add myself as maintainer of the FRV port.
 852
 853 2003-08-20  Michael Snyder  <msnyder@redhat.com>
 854             Dave Brolley  <brolley@redhat.com>
 855
 856         * frv/: New directory, simulator for the Fujitsu FRV.
 857         * configure.in: Add frv configury.
 858         * configure: Regenerate.
 859
 860 2003-08-10  Ben Elliston  <bje@wasabisystems.com>
 861
 862         * MAINTAINERS: Update my mail address.
 863
 864 2003-08-09  Andrew Cagney  <cagney@redhat.com>
 865
 866         * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
 867         maintenance.  List igen and sh maintainers.  Mention that target
 868         and global maintainers pick up the slack.
 869
 870 2003-07-09  Michael Snyder  <msnyder@redhat.com>
 871
 872         * configure.in: Add testsuite to extra_subdirs for sh.
 873         * configure: Regenerate.
 874
 875 2003-01-23  Nick Clifton  <nickc@redhat.com>
 876
 877         * Add sh2e support:
 878
 879 2002-04-02  Alexandre Oliva  <aoliva@redhat.com>
 880
 881         * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
 882
 883 2002-08-24  Geoffrey Keating  <geoffk@redhat.com>
 884
 885         * MAINTAINERS: Update my email address.
 886
 887 2002-07-17  Andrew Cagney  <ac131313@redhat.com>
 888
 889         * w65/: Delete directory.
 890
 891 2002-07-16  Andrew Cagney  <ac131313@redhat.com>
 892
 893         * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
 894         * configure: Re-generate.
 895
 896 2002-07-13  Andrew Cagney  <ac131313@redhat.com>
 897
 898         * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
 899         * configure: Re-generate.
 900
 901 2002-06-16  Andrew Cagney  <ac131313@redhat.com>
 902
 903         * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
 904         id, date and host to be overriden by NAME, ID, DATE and HOST
 905         respectfully.  Use ISO dates.
 906
 907 Thu Jun  6 12:34:13 2002  Andrew Cagney  <cagney@redhat.com>
 908
 909         * Makefile.in (ChangeLog): New makefile variable.
 910         * README-HACKING: Mention the ChangeLog makefile variable.
 911
 912 2002-06-01  Andrew Cagney  <ac131313@redhat.com>
 913
 914         * tic80/: Delete directory.
 915
 916 2002-05-16  Stephane Carrez  <stcarrez@nerim.fr>
 917
 918         * MAINTAINERS: Update my email address.
 919
 920 2002-03-06  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
 921
 922         * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
 923
 924 2002-03-01  Frank Ch. Eigler  <fche@redhat.com>
 925
 926         * MAINTAINERS: Record self as a co-maintainer of just common/.
 927
 928 2002-02-07  Nick Clifton  <nickc@cambridge.redhat.com>
 929
 930         * MAINTAINERS: Point to GDB files describing overall maintaince
 931         and check-in procedures.
 932
 933 2002-01-10  Nick Clifton  <nickc@cambridge.redhat.com>
 934
 935         * MAINTAINERS: Add myself for ARM portions.
 936
 937 2001-10-19  Andrew Cagney  <ac131313@redhat.com>
 938
 939         * configure.in: When Linux or NetBSD, enable PowerPC simulator.
 940         * configure: Re-generate.
 941
 942 2001-02-16  Ben Elliston  <bje@redhat.com>
 943
 944         * MAINTAINERS: Add myself for common portions.
 945
 946 2001-01-15  Chris Demetriou  <cgd@broadcom.com>
 947
 948         * MAINTAINERS: Added self and Andrew for the mips sim.
 949
 950 2000-10-25  Geoff Keating  <geoffk@cygnus.com>
 951
 952         * MAINTAINERS: Added self and Andrew for the ppc sim.
 953
 954 Thu Jul 27 21:26:26 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 955
 956         From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
 957         * m68hc11: New directory.
 958         * configure.in: Add.
 959         * configure: Regenerate.
 960
 961 Tue Jul  4 13:43:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 962
 963         * tic80: New directory.
 964         * configure.in: Add configury.
 965         * configure: Regenerate.
 966
 967 2000-04-20  Nick Clifton  <nickc@cygnus.com>
 968
 969         * configure.in (extra_subdirs): Add testsuite to strongarm
 970         directories.
 971         * configure: Regenerate.
 972
 973 Sat Mar  4 16:48:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 974
 975         * MAINTAINERS: New file.  Blank.
 976
 977 1999-11-18  Ben Elliston  <bje@cygnus.com>
 978
 979         * configure.in: Require autoconf 2.13 and remove obsolete
 980         invocation of AC_C_CROSS.
 981         * configure: Regenerate.
 982
 983 1999-09-29  Doug Evans  <devans@casey.cygnus.com>
 984
 985         * configure.in: Configure the testsuite directory for thumb.
 986         * configure: Regenerate.
 987
 988 1999-07-16  Ben Elliston  <bje@cygnus.com>
 989
 990         * configure.in: Configure the testsuite directory for arm.
 991         * configure: Regenerate.
 992
 993 1999-04-08  Nick Clifton  <nickc@cygnus.com>
 994
 995         * configure.in: Add support for MCore target.
 996         * configure: Regenerate.
 997
 998 1999-03-14  Stan Shebs  <shebs@andros.cygnus.com>
 999
1000         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
1001         RUNTEST instead of commenting out, fixes portability problem.
1002
1003 1999-02-08  Nick Clifton  <nickc@cygnus.com>
1004
1005         * configure.in: Add support for StrongARM target.
1006         * configure: Regenerate.
1007
1008 1999-01-04  Jason Molenda  (jsm@bugshack.cygnus.com)
1009
1010         * configure.in: Require autoconf 2.12.1 or higher.
1011
1012 1998-12-08  James E Wilson  <wilson@wilson-pc.cygnus.com>
1013
1014         * configure.in (i960-*-*): Add.
1015         * configure: Rebuild.
1016
1017 Wed Nov  4 19:11:43 1998  Dave Brolley  <brolley@cygnus.com>
1018
1019         * configure.in: Added case for fr30-*-*.
1020         * configure: Regenerated.
1021
1022 Fri Sep 25 10:12:19 1998  Christopher Faylor <cgf@cygnus.com>
1023
1024         * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
1025         to allow successful operation on Windows.
1026
1027 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
1028
1029         * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
1030         check can be invoked recursively.
1031
1032 Wed Apr 29 12:38:53 1998  Mark Alexander  <marka@cygnus.com>
1033
1034         * configure.in: Build simulator on sparclite and sparc86x targets.
1035         * configure: Regenerate.
1036
1037 Sun Apr 26 15:21:01 1998  Tom Tromey  <tromey@cygnus.com>
1038
1039         * Makefile.in (autoconf-common autoheader-common): Don't pass -l
1040         to autoconf and autoheader.
1041
1042 Fri Apr 24 11:14:13 1998  Tom Tromey  <tromey@cygnus.com>
1043
1044         * Makefile.in (autoconf-common autoheader-common): Pass `-l
1045         ../common' to autoconf and autoheader.  Unconditionally run
1046         autoconf in every subdir.
1047         (autoconf-changelog autoheader-changelog): Unconditionally run
1048         commands in every subdir.
1049         (autoconf-install autoheader-install): Likewise.
1050
1051 Tue Mar 24 17:12:43 1998  Stu Grossman  <grossman@bhuna.cygnus.co.uk>
1052
1053         * Makefile.in:  Get SHELL from configure.
1054         * (FLAGS_TO_PASS):  Pass down SHELL.
1055         * configure:  Regenerate with autoconf 2.12.1 to fix shell issues for
1056         NT native builds.
1057
1058 Tue Mar 24 11::18:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
1059
1060         * configure.in (extra_subdirs): Enable igen for mn10300.
1061         * configure: Re-generate.
1062
1063 Tue Dec  2 10:10:42 1997  Nick Clifton  <nickc@cygnus.com>
1064
1065         * configure.in (extra_subdirs): Add support for thumb target.
1066
1067         * configure (extra_subdirs): Add support for thumb target.
1068
1069 Wed Oct  8 12:38:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1070
1071         * configure.in (extra_subdirs): Add IGEN directory when MIPS
1072         target.
1073         * configure: Regenerate.
1074
1075 Fri Sep 12 13:10:31 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1076
1077         * configure.in (extra_subdirs): v850ea needs igen.
1078         * configure: Re-generate.
1079
1080 Mon Sep  1 16:48:23 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1081
1082         * configure.in (testdir): When a testsuite directory, add that to
1083         the list of confdirs.
1084
1085 Tue Aug 19 11:17:46 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1086
1087         * configure.in (extra_subdirs): Enable igen ready for V850.
1088
1089 Tue Aug 26 15:14:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1090
1091         * configure.in (w65-*-*, only_if_enabled): Set.
1092         * configure: Re-generate.
1093
1094 Mon Aug 25 16:26:53 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1095
1096         * configure.in (sparc*-*-*, only_if_enabled): Set
1097         only_if_enabled=yes.  Check only_if_enabled before enabling a
1098         simulator.
1099         * configure: Regenerate.
1100
1101 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1102
1103         * configure.in (extra_subdirs): Add v850e target.
1104
1105 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1106
1107         * configure.in (extra_subdirs): Add v850ea target.
1108
1109 Fri Jul 25 11:40:47 1997  Doug Evans  <dje@canuck.cygnus.com>
1110
1111         * configure.in (sparc*-*-*): Don't build erc32.
1112         * configure: Regenerate.
1113
1114 Thu Apr 24 00:47:20 1997  Doug Evans  <dje@canuck.cygnus.com>
1115
1116         * configure.in (m32r-*-*): New target.
1117         * configure: Regenerate.
1118
1119         * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
1120
1121 Mon Apr 21 22:57:55 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1122
1123         * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
1124         thought that .NOEXPORT was the default target.
1125
1126 Fri Apr 11 17:18:07 1997  Ian Lance Taylor  <ian@cygnus.com>
1127
1128         * Makefile.in (clean mostlyclean): Restore targets accidentally
1129         deleted in earlier change.
1130
1131 Thu Apr  3 12:20:32 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1132
1133         * Makefile.in (autoheader-common, autoheader-changelog,
1134         autoheader-install): Perform autoheader in addition to autoconf.
1135
1136 Wed Apr  2 15:09:05 1997  Doug Evans  <dje@canuck.cygnus.com>
1137
1138         * Makefile.in (autoconf-install): New target.
1139         (autoconf-changelog): Try different way to obtain user name.
1140
1141 Wed Apr  2 14:25:52 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1142
1143         * Makefile.in (autoconf-changelog): New target, update
1144         ChangeLog for all subdirectories - normally used after
1145         autoconf-common target.
1146
1147 Wed Mar 19 14:26:21 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1148
1149         * configure.in (extra_subdirs): Include testsuite for d30v.
1150         * configure: Regenerate.
1151
1152         * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1153         ../gdb/Makefile.in
1154         (check): New rules - drive the testsuite.
1155
1156 Mon Mar  3 13:01:00 1997  Jeffrey A Law  (law@cygnus.com)
1157
1158         * configure.in: Add mn10200 configure lines accidentally
1159         removed.
1160         * configure: Regenerated.
1161
1162 Wed Feb 19 10:34:20 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1163
1164         * configure.in (extra_subdirs): Generalize common sub directory
1165         into a list.
1166         (extra_subdirs): For d30v add igen to the list to be built.
1167
1168 Sun Feb 16 16:37:47 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1169
1170         * configure.in (d30v): New target.
1171         * configure: Regenerated.
1172
1173 Wed Feb 19 23:17:13 1997  Jeffrey A Law  (law@cygnus.com)
1174
1175         * configure.in: Don't require GCC to build the mn10200
1176         simulator anymore.
1177         * configure: Rebuilt.
1178
1179 Wed Feb  5 13:28:13 1997  Doug Evans  <dje@canuck.cygnus.com>
1180
1181         * configure.in: Don't configure any subdirs if no simulator
1182         is being built.  Don't use erc32 for sparc64.
1183         * configure: Regenerated.
1184
1185 Tue Feb  4 13:19:39 1997  Doug Evans  <dje@canuck.cygnus.com>
1186
1187         * Makefile.in (autoconf-common): New target.
1188         * configure.in: Do configure common.
1189         * configure: Regenerated.
1190
1191 Thu Jan 23 13:59:52 1997  Stu Grossman  (grossman@critters.cygnus.com)
1192
1193         * configure configure.in:  Don't configure common anymore.  Files
1194         from common are now built in the individual simualtor directories.
1195         This fixes problems with the WinGDB build procedure.
1196
1197 Mon Jan 13 13:16:42 1997  Jeffrey A Law  (law@cygnus.com)
1198
1199         * configure: Enable the mn10200 simulator.
1200
1201 Wed Nov 20 01:00:36 1996  Doug Evans  <dje@canuck.cygnus.com>
1202
1203         * configure.in (configdirs): Add common.
1204         * configure: Regenerated.
1205
1206 Fri Nov  1 08:03:30 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1207
1208         * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1209         system V based targets.
1210         * configure: Regenerate.
1211
1212 Thu Oct 17 12:50:08 1996  Doug Evans  <dje@canuck.cygnus.com>
1213
1214         * configure.in (--enable-sim-powerpc): Delete.
1215         (--enable-sim): Add.
1216         * configure: Regenerated.
1217
1218 Fri Oct 11 21:13:43 1996  Jeffrey A Law  (law@cygnus.com)
1219
1220         * configure.in: Only build the V850 simulator if
1221         we are using gcc.
1222         * configure: Rebuild.
1223
1224 Sun Sep  8 17:22:50 1996  Ian Lance Taylor  <ian@cygnus.com>
1225
1226         * configure.in: Do build erc32 for DOS and Windows hosts.
1227         * configure: Rebuild.
1228
1229 Wed Sep  4 18:11:27 1996  Stu Grossman  (grossman@critters.cygnus.com)
1230
1231         * Makefile.in erc32/Makefile.in:  Don't set srcroot.  This should
1232         be inherited from the parent.  Remove INSTALL_XFORM and
1233         INSTALL_XFORM1.  Make INSTALL be set from configure.
1234
1235 Wed Sep  4 15:49:16 1996  Ian Lance Taylor  <ian@cygnus.com>
1236
1237         * configure.in: Only build the MIPS simulator if we are using
1238         gcc.
1239         * configure: Rebuild.
1240
1241 Wed Aug 28 19:05:23 1996  Jeffrey A Law  (law@cygnus.com)
1242
1243         * configure.in (v850-*-*): Added V850 simulator.
1244
1245 Thu Aug  1 17:08:41 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1246
1247         * configure.in (d10v-*-*): Added D10V simulator.
1248
1249 Wed Jun 26 12:33:57 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
1250
1251         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1252         INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1253         (docdir): Removed.
1254         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1255         (AC_PROG_INSTALL): Added.
1256         * configure: Rebuilt.
1257
1258 Mon Jun 24 14:18:26 1996  Ian Lance Taylor  <ian@cygnus.com>
1259
1260         * configure.in: Only configure erc32 if using gcc.
1261         * configure: Rebuild.
1262
1263 Tue Jun  4 09:24:21 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1264
1265         * configure.in (sim_target): Build PowerPC simulator for powerpc
1266         System V.4, Solaris, and Elf targets.
1267         * configure: Regenerate with autoconf 2.10.
1268
1269 Wed May 22 12:10:49 1996  Rob Savoye  <rob@chinadoll>
1270
1271         * configure.in: Only built erc32 simulator on Unix hosts as it
1272         uses pseudo ttys.
1273         * configure: Regenerated with autoconf 2.8.
1274
1275 Sun May 19 20:20:40 1996  Rob Savoye  <rob@chinadoll.cygnus.com>
1276
1277         * erc32: Sparc simulator from the ESA.
1278
1279 Sun Apr  7 21:00:09 1996  Fred Fish  <fnf@cygnus.com>
1280
1281         From: Miles Bader  <miles@gnu.ai.mit.edu>
1282         * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1283         * configure: Regenerate using autoconf.
1284
1285 Thu Feb 22 11:31:50 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1286
1287         * Makefile.in (install): Fix typo.
1288
1289 Wed Feb 21 11:59:57 1996  Ian Lance Taylor  <ian@cygnus.com>
1290
1291         * configure: Regenerate with autoconf 2.7.
1292
1293         * Makefile.in (all): Simplify.
1294         (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1295         as in the all target.
1296         (distclean, maintainer-clean, realclean): Likewise.
1297         (install): Likewise.
1298
1299 Thu Feb 15 18:37:00 1996  Fred Fish  <fnf@cygnus.com>
1300
1301         * Makefile.in (all): Remove extra '\' char from shell script.
1302
1303 Wed Feb 14 16:43:59 1996  Mike Meissner  <meissner@tiktok.cygnus.com>
1304
1305         * Makefile.in (all): Avoid a for loop with zero elements, even if
1306         the loop will not be executed because of an if statement.
1307
1308 Wed Jan 31 21:48:34 1996  Fred Fish  <fnf@cygnus.com>
1309
1310         * Makefile.in (install): Add missing semicolon in "fi \".
1311
1312 Thu Nov  9 16:10:56 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1313
1314         * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1315         defaults from configure.
1316
1317         * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1318         configure defaults.
1319         (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1320         if either --enable-sim-powerpc is used, or the host compiler is
1321         GCC.
1322
1323 Wed Nov  8 15:46:49 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
1324
1325         * configure.in (mips*-*-*): Added "mips" simulator target.
1326         * configure: Re-generated.
1327
1328 Tue Oct 10 11:08:20 1995  Fred Fish  <fnf@cygnus.com>
1329
1330         * Makefile.in (BISON): Remove macro.
1331         (FLAGS_TO_PASS): Remove BISON.
1332
1333 Sun Oct  8 04:26:27 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1334
1335         * configure.in:  Explicitly `exit 0' for broken shells.
1336         * configure:  Rebuilt.
1337
1338 Fri Oct  6 12:03:27 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1339
1340         * common/run.c (main): Initialize the callbacks.
1341
1342 Wed Sep 20 13:34:50 1995  Ian Lance Taylor  <ian@cygnus.com>
1343
1344         * Makefile.in (maintainer-clean): New synonym for realclean.
1345
1346 Fri Aug 25 11:53:43 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1347
1348         * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1349         the target is powerpc*-*-eabisim*, since it requires GCC to build.
1350
1351 Mon Aug 21 17:53:48 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1352
1353         * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1354         <cagney@highland.com.au>.
1355         * configure: Regnerate from configure.in.
1356
1357 Thu Aug  3 10:45:37 1995  Fred Fish  <fnf@cygnus.com>
1358
1359         * Update all FSF addresses except those in COPYING* files.
1360
1361 Thu Jul 20 15:17:29 1995  Fred Fish  <fnf@cygnus.com>
1362
1363         * Makefile.in (CC_FOR_BUILD):  Define default and arrange to pass
1364         submakes either default or passed in value.
1365
1366 Wed Jul  5 14:32:54 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1367
1368         * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1369           install): Changed targets so that they descend all
1370           subdirectories in $(SUBDIRS).
1371           (*-all, *-clean, *-install): Removed targets.
1372
1373         * configure.in: Don't bother with target makefile fragments, they
1374           are no longer needed.
1375         * configure: regenerated.
1376
1377         * Makefile.in, configure.in: converted to autoconf.
1378         * configure: New file, generated with autconf 2.4.
1379
1380 Wed May 24 14:48:46 1995  Steve Chamberlain  <sac@slash.cygnus.com>
1381
1382         * Makefile.in: Support ARM.
1383         * configure.in: Ditto.
1384
1385 Sun Jan 15 16:53:47 1995  Steve Chamberlain  <sac@splat>
1386
1387         * Makefile.in: Support W65.
1388         * configure.in: Ditto.
1389
1390 Sun Mar 13 09:27:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1391
1392         * Makefile.in: Add TAGS target.
1393
1394 Mon Sep 13 12:47:15 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
1395
1396         * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1397           install-h8300, clean-h8300, all-h8500, install-h8500,
1398           clean-h8500, all-sh, install-sh, clean-sh): do not echo
1399           recursion lines.
1400
1401 Wed Jun 30 14:12:05 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
1402
1403         * Makefile.in: remove endian.h trace from h8500
1404
1405 Sun Jun 13 13:08:58 1993  Jim Kingdon  (kingdon@cygnus.com)
1406
1407         * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1408
1409 Fri May 21 11:21:16 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1410
1411         * Makefile.in: make all of the all-* target (except all-nothing)
1412         depend on endian.h, so that if we're not building a simulator, we
1413         don't built endian
1414
1415 Fri May 21 10:55:06 1993  Ian Lance Taylor  (ian@cygnus.com)
1416
1417         * Makefile.in (check, installcheck): Added dummy targets.
1418
1419 Mon May  3 21:39:43 1993  Fred Fish  (fnf@cygnus.com)
1420
1421         * Makefile.in (endian): Find endian.c in $(srcdir), and also
1422         explicitly make it, since some makes apparently don't work with
1423         VPATH and .c to executable rules (SunOS make for example).
1424
1425 Mon May  3 08:29:01 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1426
1427         * Makefile.in (endian): Add explicit rule for broken makes.
1428
1429 Mon Mar 15 15:47:53 1993  Ian Lance Taylor  (ian@cygnus.com)
1430
1431         * Makefile.in (info, install-info): New targets.
1432         (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1433         level Makefile.
1434
1435 Wed Feb 10 20:12:27 1993  K. Richard Pixley  (rich@ok.cygnus.com)
1436
1437         * Makefile.in (endian.h): build endian.h via a temporary file so
1438           that we don't leave an incomplete file lying around on
1439           interrupted builds.
1440           (clean): remove endian, e.h, and endian.h.
1441
1442 Mon Feb  8 11:46:06 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1443
1444         * Makefile.in, configure.in: if target isn't supported, build a
1445         harmless makefile.
1446
1447