1 2019-09-23 Dimitar Dimitrov <dimitar@dinux.eu>
3 * MAINTAINERS: Add myself as PRU maintainer.
4 * configure: Regenerated.
5 * configure.tgt: Add PRU.
7 2019-09-20 Alan Modra <amodra@gmail.com>
9 * ppc/emul_generic.c (emul_add_tree_options): Delete old bfd code.
11 2019-09-18 Alan Modra <amodra@gmail.com>
13 * common/sim-load.c, * common/sim-utils.c, * cris/sim-if.c,
14 * erc32/func.c, * lm32/sim-if.c, * m32c/load.c, * m32c/trace.c,
15 * m68hc11/interp.c, * ppc/hw_htab.c, * ppc/hw_init.c,
16 * rl78/load.c, * rl78/trace.c, * rx/gdb-if.c, * rx/load.c,
17 * rx/trace.c: Update throughout for bfd section macro changes.
19 2019-06-13 Stafford Horne <shorne@gmail.com>
21 * or1k/cpu.c: Regenerate.
22 * or1k/cpu.h: Regenerate.
23 * or1k/decode.c: Regenerate.
24 * or1k/decode.h: Regenerate.
25 * or1k/model.c: Regenerate.
26 * or1k/sem-switch.c: Regenerate.
27 * or1k/sem.c: Regenerate.
29 2019-02-28 Joel Brobecker <brobecker@adacore.com>
31 * MAINTAINERS: Move Mike Frysinger to past maintainers' section.
33 2019-02-13 Simon Marchi <simon.marchi@ericsson.com>
35 * MAINTAINERS: Add Andrew Burgess as global maintainer.
37 2019-01-03 Pavel I. Kryukov <kryukov@frtk.ru>
39 * sim-base.h: Add 'extern C' if header is compiled with C++.
41 2018-12-06 Andrew Burgess <andrew.burgess@embecosm.com>
43 * common/acinclude.m4 (enable-cgen-maint): Support passing path to
45 * cris/configure: Regenerate.
46 * frv/configure: Regenerate.
47 * iq2000/configure: Regenerate.
48 * lm32/configure: Regenerate.
49 * m32r/configure: Regenerate.
50 * or1k/configure: Regenerate.
51 * sh64/configure: Regenerate.
53 2018-10-05 Stafford Horne <shorne@gmail.com>
55 * or1k/cpu.h: Regenerate.
56 * or1k/decode.c: Regenerate.
57 * or1k/decode.h: Regenerate.
58 * or1k/model.c: Regenerate.
59 * or1k/sem-switch.c: Regenerate.
60 * or1k/sem.c: Regenerate:
62 2018-07-20 Maciej W. Rozycki <macro@mips.com>
64 * MAINTAINERS: Update my e-mail address, downgrade to MIPS I-IV
67 2018-07-19 DJ Delorie <dj@redhat.com>
69 * MAINTAINERS (rl78, m32c, rx, v850): Remove myself as maintainer.
71 2018-07-14 Stafford Horne <shorne@gmail.com>
73 * MAINTAINERS (or1k): Add myself as or1k maintainer.
75 2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
77 * All configure.ac: Remove AC_PREREQ.
78 * All configure: Re-generate.
80 2018-01-22 Maciej W. Rozycki <macro@mips.com>
82 * MAINTAINERS: Update my company e-mail address.
84 2017-12-12 Stafford Horne <shorne@gmail.com>
85 Peter Gavin <pgavin@gmail.com>
87 * configure: Regenerated.
88 * or1k/aclocal.m4: Generated.
89 * or1k/config.in: Generated.
90 * or1k/configure: Generated.
92 2017-12-12 Stafford Horne <shorne@gmail.com>
93 Peter Gavin <pgavin@gmail.com>
95 * or1k/arch.c: Generated.
96 * or1k/arch.h: Generated.
97 * or1k/cpu.c: Generated.
98 * or1k/cpu.h: Generated.
99 * or1k/cpuall.h: Generated.
100 * or1k/decode.c: Generated.
101 * or1k/decode.h: Generated.
102 * or1k/model.c: Generated.
103 * or1k/sem-switch.c: Generated.
104 * or1k/sem.c: Generated.
106 2017-12-12 Stafford Horne <shorne@gmail.com>
107 Peter Gavin <pgavin@gmail.com>
109 * configure.tgt: Add or1k sim.
110 * or1k/README: New file.
111 * or1k/Makefile.in: New file.
112 * or1k/configure.ac: New file.
113 * or1k/mloop.in: New file.
114 * or1k/or1k-sim.h: New file.
115 * or1k/or1k.c: New file.
116 * or1k/sim-if.c: New file.
117 * or1k/sim-main.h: New file.
118 * or1k/traps.c: New file.
120 2017-11-01 James Bowman <james.bowman@ftdichip.com>
122 * ft32/interp.c (step_once): Add ft32 shortcode decoder.
124 2017-10-12 James Bowman <james.bowman@ftdichip.com>
126 * ft32/interp.c (step_once): Replace FT32_FLD_K8 with K15.
128 2017-10-12 James Bowman <james.bowman@ftdichip.com>
130 * MAINTAINERS (ft32): Add myself.
132 2017-10-03 Jim Wilson <wilson@tuliptree.org>
134 * MAINTAINERS (aarch64): Update my email address.
136 2017-09-06 John Baldwin <jhb@FreeBSD.org>
138 * configure.ac: Honor existing CC_FOR_BUILD in environment.
139 * configure: Regenerate.
141 2017-02-14 Jim Wilson <jim.wilson@linaro.org>
143 * MAINTAINTERS (aarch64): Add myself.
145 2016-12-14 Maciej W. Rozycki <macro@imgtec.com>
147 * MAINTAINERS (Maintainers for particular sims): Add myself as
150 2016-02-03 Maciej W. Rozycki <macro@linux-mips.org>
152 * MAINTAINERS (Past sim maintainers): Add Thiemo Seufer.
154 2016-01-09 Mike Frysinger <vapier@gentoo.org>
156 * configure.ac: Delete sim_common check and the
157 AC_CONFIG_SUBDIRS(common) call.
158 * configure: Regenerate.
159 * configure.tgt (sim_common): Delete the variable.
161 2016-01-09 Mike Frysinger <vapier@gentoo.org>
163 * .gitignore: Delete /common/cconfig.h entry.
165 2016-01-05 Nick Clifton <nickc@redhat.com>
167 * MAINTAINERS: Add myself as AArch64 sim maintainer.
169 2015-12-09 Tristan Gingold <gingold@adacore.com>
171 * aarch64/simulator.c: Remove syscall.h include.
173 2015-12-26 Mike Frysinger <vapier@gentoo.org>
175 * README-HACKING: Delete mention of tconfig.h.
177 2015-11-24 Nick Clifton <nickc@redhat.com>
179 * configure.tgt: Add aarch64 entry.
180 * configure: Regenerate.
182 2015-06-23 Mike Frysinger <vapier@gentoo.org>
184 * configure.ac (AC_ARG_ENABLE(sim)): Call AS_HELP_STRING.
185 * configure: Regenerate.
187 2015-06-12 Mike Frysinger <vapier@gentoo.org>
189 * README-HACKING: Change configure.in to configure.ac.
191 2015-04-02 H.J. Lu <hongjiu.lu@intel.com>
193 * arm/configure: Regenerated.
194 * avr/configure: Likewise.
195 * bfin/configure: Likewise.
196 * common/configure: Likewise.
197 * cr16/configure: Likewise.
198 * cris/configure: Likewise.
199 * d10v/configure: Likewise.
200 * erc32/configure: Likewise.
201 * frv/configure: Likewise.
202 * ft32/configure: Likewise.
203 * h8300/configure: Likewise.
204 * igen/configure: Likewise.
205 * iq2000/configure: Likewise.
206 * lm32/configure: Likewise.
207 * m32c/configure: Likewise.
208 * m32r/configure: Likewise.
209 * m68hc11/configure: Likewise.
210 * mcore/configure: Likewise.
211 * microblaze/configure: Likewise.
212 * mips/configure: Likewise.
213 * mn10300/configure: Likewise.
214 * moxie/configure: Likewise.
215 * msp430/configure: Likewise.
216 * ppc/configure: Likewise.
217 * rl78/configure: Likewise.
218 * rx/configure: Likewise.
219 * sh/configure: Likewise.
220 * sh64/configure: Likewise.
221 * v850/configure: Likewise.
223 2015-04-01 H.J. Lu <hongjiu.lu@intel.com>
225 * common/Make-common.in (CSEARCH): Remove $(ZLIBINC).
226 (BFD_LIB): Remove $(ZLIB).
227 (CONFIG_LIBS): Add $(ZLIB).
228 * ppc/Makefile.in (ZLIBINC): Removed.
229 (INCLUDES): Remove $(ZLIBINC).
230 (BFD_LIB): Remove $(ZLIB).
232 2015-04-01 H.J. Lu <hongjiu.lu@intel.com>
234 * arm/configure: Regenerated.
235 * avr/configure: Likewise.
236 * bfin/configure: Likewise.
237 * common/configure: Likewise.
238 * cr16/configure: Likewise.
239 * cris/configure: Likewise.
240 * d10v/configure: Likewise.
241 * erc32/configure: Likewise.
242 * frv/configure: Likewise.
243 * ft32/configure: Likewise.
244 * h8300/configure: Likewise.
245 * igen/configure: Likewise.
246 * iq2000/configure: Likewise.
247 * lm32/configure: Likewise.
248 * m32c/configure: Likewise.
249 * m32r/configure: Likewise.
250 * m68hc11/configure: Likewise.
251 * mcore/configure: Likewise.
252 * microblaze/configure: Likewise.
253 * mips/configure: Likewise.
254 * mn10300/configure: Likewise.
255 * moxie/configure: Likewise.
256 * msp430/configure: Likewise.
257 * ppc/configure: Likewise.
258 * rl78/configure: Likewise.
259 * rx/configure: Likewise.
260 * sh/configure: Likewise.
261 * sh64/configure: Likewise.
262 * v850/configure: Likewise.
264 2015-03-29 Mike Frysinger <vapier@gentoo.org>
266 * configure: Regenerate.
267 * configure.ac: Delete sim_testsuite check and config in testsuite.
268 * configure.tgt (sim_testsuite): Delete everywhere.
270 2015-03-28 Mike Frysinger <vapier@gentoo.org>
272 * configure: Regenerate.
273 * configure.tgt (avr*-*-*): Set sim_testsuite=yes.
275 2015-03-28 James Bowman <james.bowman@ftdichip.com>
277 * configure.tgt: Add FT32 entry.
278 * configure: Regenerate.
280 2015-03-16 Mike Frysinger <vapier@gentoo.org>
282 * .gitignore: Delete tconfig.h.
283 * README-HACKING: Change tconfig.in to tconfig.h.
285 2014-03-12 Nick Clifton <nickc@redhat.com>
287 * MAINTAINERS: Add myself as the maintainer for the MSP430.
289 2014-03-10 Mike Frysinger <vapier@gentoo.org>
291 * configure.tgt (msp430*-*-*): Set sim_testsuite to yes.
292 * configure: Regenerate.
294 2014-01-06 Tom Tromey <tromey@redhat.com>
296 * common/cgen-trace.c: Don't use old VA_* macros.
297 * common/sim-load.c (xprintf): Likewise.
298 * common/sim-trace.c (trace_printf, debug_printf): Likewise.
300 2014-01-06 Tom Tromey <tromey@redhat.com>
302 * README-HACKING: Don't use PARAMS.
303 * arm/wrapper.c: Don't use PARAMS.
304 * bfin/sim-main.h: Don't use PARAMS.
305 * common/callback.c: Don't use PARAMS.
306 * common/cgen-trace.c: Don't use PARAMS.
307 * common/run-sim.h: Don't use PARAMS.
308 * common/run.c: Don't use PARAMS.
309 * common/sim-base.h: Don't use PARAMS.
310 * common/sim-load.c: Don't use PARAMS.
311 * common/sim-options.h: Don't use PARAMS.
312 * common/sim-trace.c: Don't use PARAMS.
313 * common/sim-trace.h: Don't use PARAMS.
314 * common/sim-utils.h: Don't use PARAMS.
315 * cr16/cr16_sim.h: Don't use PARAMS.
316 * cr16/gencode.c: Don't use PARAMS.
317 * cr16/interp.c: Don't use PARAMS.
318 * cr16/simops.c: Don't use PARAMS.
319 * d10v/d10v_sim.h: Don't use PARAMS.
320 * d10v/gencode.c: Don't use PARAMS.
321 * d10v/interp.c: Don't use PARAMS.
322 * d10v/simops.c: Don't use PARAMS.
323 * erc32/erc32.c: Don't use PARAMS.
324 * erc32/exec.c: Don't use PARAMS.
325 * erc32/float.c: Don't use PARAMS.
326 * erc32/func.c: Don't use PARAMS.
327 * erc32/sis.c: Don't use PARAMS.
328 * erc32/sis.h: Don't use PARAMS.
329 * mips/interp.c: Don't use PARAMS.
330 * mips/sim-main.h: Don't use PARAMS.
331 * sh/interp.c: Don't use PARAMS.
332 * v850/sim-main.h: Don't use PARAMS.
333 * v850/v850_sim.h: Don't use PARAMS.
335 2013-11-07 Will Newton <will.newton@linaro.org>
338 * arm/wrapper.c (sim_create_inferior): Call init before
341 2013-11-07 Will Newton <will.newton@linaro.org>
344 * arm/wrapper.c (sim_create_inferior): Avoid calling
345 bfd_get_mach with a NULL bfd.
347 2013-06-21 Nick Clifton <nickc@redhat.com>
349 * msp430: New Directory.
350 * configure.tgt: Add it.
351 * configure: Regenerate.
353 2013-03-15 Steve Ellcey <sellcey@mips.com>
355 * arm/wrapper.c (sim_complete_command): Make char arguments const.
356 * avr/interp.c (sim_complete_command): Ditto.
357 * common/sim-options.c (sim_complete_command): Ditto.
358 * cr16/interp.c (sim_complete_command): Ditto.
359 * erc32/interf.c (sim_complete_command): Ditto.
360 * m32c/gdb-if.c (sim_complete_command): Ditto.
361 * microblaze/interp.c (sim_complete_command): Ditto.
362 * ppc/sim_calls.c (sim_complete_command): Ditto.
363 * rl78/gdb-if.c (sim_complete_command): Ditto.
364 * rx/gdb-if.c (sim_complete_command): Ditto.
365 * sh/interp.c (sim_complete_command): Ditto.
367 2013-01-01 Joel Brobecker <brobecker@adacore.com>
369 Update year range in copyright notice of all files.
371 2012-12-19 Joel Brobecker <brobecker@adacore.com>
373 Update old contact info in GPL license notices.
375 2012-12-19 Joel Brobecker <brobecker@adacore.com>
377 Update the non-FSF-copyrighted files in sim to GPLv3 or later.
379 2012-11-20 Pavel Chupin <pavel.v.chupin@intel.com>
381 * common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS
383 * common/acinclude.m4: Define lt_cv_dlopen_libs.
384 * arm/configure: Regenerate.
385 * avr/configure: Regenerate.
386 * bfin/configure: Regenerate.
387 * common/configure: Regenerate.
388 * cr16/configure: Regenerate.
389 * cris/configure: Regenerate.
390 * d10v/configure: Regenerate.
391 * erc32/configure: Regenerate.
392 * frv/configure: Regenerate.
393 * h8300/configure: Regenerate.
394 * igen/configure: Regenerate.
395 * iq2000/configure: Regenerate.
396 * lm32/configure: Regenerate.
397 * m32c/configure: Regenerate.
398 * m32r/configure: Regenerate.
399 * m68hc11/configure: Regenerate.
400 * mcore/configure: Regenerate.
401 * microblaze/configure: Regenerate.
402 * mips/configure: Regenerate.
403 * mn10300/configure: Regenerate.
404 * moxie/configure: Regenerate.
405 * ppc/configure: Regenerate.
406 * rl78/configure: Regenerate.
407 * rx/configure: Regenerate.
408 * sh/configure: Regenerate.
409 * sh64/configure: Regenerate.
410 * testsuite/configure: Regenerate.
411 * v850/configure: Regenerate.
413 2012-11-05 Stephane Carrez <Stephane.Carrez@gmail.com>
415 * MAINTAINERS: Update my email address.
417 2012-09-24 Steve Ellcey <sellcey@mips.com>
419 * mips/basic.exp: Add mips*-mti-elf* target.
420 * configure.ac: Add mips*-mti-elf* target.
421 * configure: Regenerate.
423 2012-06-15 Joel Brobecker <brobecker@adacore.com>
425 * configure: Regenerate.
427 2012-06-06 Michael Eager <eager@eagercon.com>
429 * microblaze/interp.c (config.h): Add #include.
431 2011-11-29 Joel Brobecker <brobecker@adacore.com>
433 * MAINTAINERS (Global Maintainers): New section. Add Mike
436 2011-11-28 DJ Delorie <dj@redhat.com>
438 * configure.tgt: Add rl78 support.
439 * configure: Regenerate.
440 * rl78: New directory.
441 * MAINTAINERS: Add myself as RL78 maintainer.
443 2011-07-08 Hans-Peter Nilsson <hp@axis.com>
445 * MAINTAINERS: Remove Thiemo Seufer.
447 2011-06-04 Mike Frysinger <vapier@gentoo.org>
449 * configure.tgt (bfin-*-*): Add sim_testsuite=yes.
450 * configure: Regenerate.
452 2011-05-04 Joseph Myers <joseph@codesourcery.com>
454 * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
456 * configure: Regenerate.
458 2011-03-05 Mike Frysinger <vapier@gentoo.org>
460 * MAINTAINERS: Add bfin entry.
461 * configure.tgt (bfin-*-*): Handle bfin targets.
462 * configure: Regenerate.
464 2011-01-05 Mike Frysinger <vapier@gentoo.org>
466 * .gitignore: Add /*/hw-config.h.
468 2010-12-23 Mike Frysinger <vapier@gentoo.org>
470 * .gitignore: New file.
472 2010-07-28 DJ Delorie <dj@redhat.com>
474 * MAINTAINERS: Add self as RX maintainer. Sort list.
476 2010-06-08 Nick Clifton <nickc@redhat.com>
478 * reg.c (set_oszc): Use unsigned int for the mask.
479 (set_szc, set_osz, set_sz): Likewise.
481 2010-04-26 Mike Frysinger <vapier@gentoo.org>
483 * configure.ac: Target logic moved out to and included from ...
484 * configure.tgt: ... this new file.
485 * configure: Regenerated.
487 2010-04-12 Mike Frysinger <vapier@gentoo.org>
489 * README-HACKING: Add more sections.
491 2010-02-11 Doug Evans <dje@sebabeach.org>
493 * cris/cpuv10.h, * cris/cpuv32.h, * cris/cris-desc.c,
494 * cris/cris-desc.h, * cris/decodev10.c, * cris/decodev32.c,
495 * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
496 * cris/semcrisv32f-switch.c: Regenerate.
498 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
500 * avr/configure: Regenerate.
501 * cris/configure: Regenerate.
502 * microblaze/configure: Regenerate.
504 2010-01-02 Doug Evans <dje@sebabeach.org>
506 * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c,
507 * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c,
508 * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c,
509 * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h,
510 * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
511 * cris/semcrisv32f-switch.c: Regenerate, update copyright year.
513 2010-01-01 Doug Evans <dje@sebabeach.org>
515 * cris/mloop.in: Fix copyright year update snafu.
517 2009-11-24 Joel Brobecker <brobecker@adacore.com>
519 * common/aclocal.m4: Add include of ../../config/zlib.m4.
520 * common/common.m4: Use AM_ZLIB to check for zlib support.
521 * ppc/configure.ac: Likewise.
522 * arm/configure, avr/configure, common/configure, cr16/configure,
523 cris/configure, d10v/configure, erc32/configure, frv/configure,
524 h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
525 m32r/configure, m68hc11/configure, mcore/configure,
526 microblaze/configure, mips/configure, mn10300/configure,
527 moxie/configure, ppc/configure, sh/configure, sh64/configure,
528 v850/configure: Regenerate.
530 2009-11-24 DJ Delorie <dj@redhat.com>
533 * configure.ac: Add entry for Renesas RX.
534 * configure: Regenerate.
536 2009-11-22 Doug Evans <dje@sebabeach.org>
538 * cris/cpuall.h: Regenerate.
539 * cris/cpuv10.h: Regenerate.
540 * cris/cpuv32.h: Regenerate.
541 * cris/decodev10.c: Regenerate.
542 * cris/decodev10.h: Regenerate.
543 * cris/decodev32.c: Regenerate.
544 * cris/decodev32.h: Regenerate.
546 2009-11-12 Tristan Gingold <gingold@adacore.com>
548 * avr/interp.c (sim_write): Allow byte access.
551 2009-11-12 Tristan Gingold <gingold@adacore.com>
553 * avr/interp.c (sim_load): Clear memory before loading.
555 2009-11-09 Tristan Gingold <gingold@adacore.com>
557 * avr/interp.c (sim_resume): Fix typo for OP_ret.
559 2009-10-23 Doug Evans <dje@sebabeach.org>
561 * cris/arch.c: Regenerate.
562 * cris/arch.h: Regenerate.
563 * cris/cpuall.h: Regenerate.
564 * cris/cpuv10.c: Regenerate.
565 * cris/cpuv10.h: Regenerate.
566 * cris/cpuv32.c: Regenerate.
567 * cris/cpuv32.h: Regenerate.
568 * cris/cris-desc.c: Regenerate.
569 * cris/cris-desc.h: Regenerate.
570 * cris/cris-opc.h: Regenerate.
571 * cris/decodev10.c: Regenerate.
572 * cris/decodev10.h: Regenerate.
573 * cris/decodev32.c: Regenerate.
574 * cris/decodev32.h: Regenerate.
575 * cris/modelv10.c: Regenerate.
576 * cris/modelv32.c: Regenerate.
577 * cris/semcrisv10f-switch.c: Regenerate.
578 * cris/semcrisv32f-switch.c: Regenerate.
580 2009-10-22 Tristan Gingold <gingold@adacore.com>
582 * avr/interp.c (sim_stop): Return 1.
584 2009-10-16 Doug Evans <dje@sebabeach.org>
586 * MAINTAINERS: Add myself as m32r maintainer.
588 2009-10-15 Michael Egaer <eager@eagercon.com>
590 * MAINTAINERS: Add self as MicroBlaze maintainer.
592 2009-10-14 Ben Elliston <bje@gnu.org>
594 * MAINTAINERS (common): Move myself to "past maintainers" section.
596 2009-10-06 Michael Eager <eager@eagercon.com>
598 * microblaze/interp.c: Add include microblaze-dis.h.
600 2009-09-23 Michael Eager <eager@eagercon.com>
602 * configure: Add microblaze-*.* (not regenerated).
603 * configure.ac: Likewise.
604 * microblaze/config.in: New.
605 * microblaze/configure: Generate.
606 * microblaze/configure.ac: New.
607 * microblaze/interp.c: New.
608 * microblaze/Makefile.in: New.
609 * microblaze/microblaze.h: New.
610 * microblaze/microblaze.isa: New.
611 * microblaze/sim-main.h: New.
612 * microblaze/sysdep.h: New.
614 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
616 * avr/config.in: Regenerate.
617 * avr/configure: Likewise.
618 * configure: Likewise.
619 * cris/config.in: Likewise.
620 * cris/configure: Likewise.
622 * configure.ac: m4_include toplevel config/override.m4.
623 * configure: Regenerate.
624 * avr/configure: Regenerate.
625 * cris/configure: Regenerate.
627 2009-07-30 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
629 * Makefile.in (datarootdir): New variable.
631 2009-05-18 Jon Beniston <jon@beniston.com>
633 * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
634 * configure.ac: Add lm32 target.
635 * lm32: New directory.
637 2009-05-11 Andrew Cagney <cagney@gnu.org>
639 * MAINTAINERS: Orphan ppc.
641 2009-05-08 Kevin Buettner <kevinb@redhat.com>
643 * m32c/gdb-if.c (m32c_signal_to_host): Rename to
644 m32c_signal_to_target. Change signal return values from SIGILL,
645 SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
646 TARGET_SIGNAL_SEGV, etc. Fix all callers.
648 2009-04-30 Anthony Green <green@moxielogic.com>
650 * MAINTAINERS: Add myself for the moxie port.
651 * moxie: New directory.
652 * configure.ac: Add entry for moxie.
653 * configure: Regenerate.
655 2009-04-27 Tristan Gingold <gingold@adacore.com>
657 * avr: New directory.
658 * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
659 * avr/config.in: New file, generated by autoheader.
660 * avr/configure: New file generated by autoconf.
661 * configure.ac: Add avr.
662 * configure: Regenerated.
664 2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
666 * Makefile.in: Add dummy install-pdf, html, and
667 install-html targets.
669 2009-01-18 Hans-Peter Nilsson <hp@axis.com>
671 * cris/sim-if.c: Include errno.h.
672 (cris_start_address, cris_program_offset): New variables.
673 (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
675 (cris_options): New options --cris-program-offset and
676 --cris-start-address.
677 (cris_option_handler): Handle new options.
678 (cris_program_offset_write, cris_set_section_offset_iterator)
679 (cris_offset_sections, cris_offset_sections): New functions.
680 (sim_load): Use cris_program_offset_write as function argument to
681 cris_load_elf_file, not sim_write.
682 (struct offsetinfo): New struct.
683 (cris_handle_interpreter): Fix typo in comment.
684 (sim_open): Call cris_offset_sections as soon as the bfd of the
685 infile is available. Gate bfd validity checks on abfd non-NULL.
686 (sim_create_inferior): Let cris_start_address when != -1 override
687 other start-address choices.
689 2009-01-06 Hans-Peter Nilsson <hp@axis.com>
691 * cris/traps.c (abort): Define to call sim_io_error.
692 (create_map): Make -1 imply a non-fixed address, not 0. All
693 callers changed. Only prefer the next higher unmapped address if
694 the last mapped address is no less than 0x40000000. Check that
695 the address to be mapped is not already mapped. Update head
697 (unmap_pages): Don't call abort when recursive call fails, just
698 note and return an error if a page in the range couldn't be unmapped.
699 (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
700 (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
701 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
702 non-MAP_FIXED argument overlapping existing map. For MAP_FIXED,
703 don't abort on page not being mapped. Handle non-anon filemap
704 with length padded to pagesize.
706 2009-01-03 Hans-Peter Nilsson <hp@axis.com>
708 * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
709 (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
710 (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
711 (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
712 (TARGET_AT_CLKTCK): Remove redundant macros.
713 (AUX_ENT): Adjust to use standard ELF AT_* macros.
714 (AUX_ENTF): Ditto. Remove always-0 middle argument. Update all
716 (sim_open): Also pass AT_SECURE.
718 * cris/sim-main.h (struct _sim_cpu): New member
719 set_target_thread_data.
720 * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
721 * cris/crisv10f.c: Ditto.
722 * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
723 (MY (f_specific_init)): Set new _sim_cpu member to new function.
724 * cris/traps.c (TARGET_SYS_set_thread_area): Define.
725 (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
728 * cris/traps.c (TARGET_SYS_exit_group): Define.
729 (cris_break_13_handler): Handle it like the exit for the last
732 * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
733 (TARGET_EPOCH): Update to match TARGET_UTSNAME. Correct comment.
734 (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
735 2.6.27. Set machine field to the BFD printable name of the
738 * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
739 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
740 TARGET_MAP_DENYWRITE.
742 * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
743 (TARGET_X_OK, TARGET_F_OK): Define.
744 (cris_break_13_handler) <case TARGET_SYS_access>: New case.
746 * cris/semcrisv32f-switch.c: Regenerate.
748 2008-12-30 Hans-Peter Nilsson <hp@axis.com>
750 * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
751 just a short CRIS-specific notice. Tweak the wording for a
752 failing architecture test.
754 * cris/traps.c (TARGET_SYS_writev): New macro.
755 (is_mapped_only, cris_dump_map): New functions.
756 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
757 and prot combinations and a non-zero page-offset. If
758 TARGET_MAP_FIXED, unmap pages before mapping them.
759 <case TARGET_SYS_mprotect>: When checking, allow any length
760 argument. Don't actually do anything.
761 <case TARGET_SYS_writev>: New case.
763 * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
764 * cris/sim-if.c: Include elf-bfd.h.
765 (struct progbounds): New members end_loadmem, start_nonloadmem.
766 (xprintf, eprintf): New functions, copied from common/sim-load.c.
767 (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
768 (get_progbounds_iterator): Renamed from get_progbounds. Make
769 static. Update head comment. Set new struct progbounds members.
770 (exec_load_addr, interp_load_addr, interp_start_addr): New static
772 (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
773 (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
775 (sim_open): New constant array auxv_entries. Rewrite AUX_ENT
776 handling to use auxv_entries. Improve error message and checking
777 for invalid programs. Use new variable abfd for the program
778 instead of for each access reaching into sd to get it.
779 (sim_create_inferior): If non-zero, use interp_start_addr instead
780 of the program start address.
781 (cris_disassemble_insn): Remove incorrect and unclear, supposedly
782 stale comment. Always specify little-endian.
784 2008-07-29 Nick Clifton <nickc@redhat.com>
786 * common/genmloop.sh: Add new parameter: -shell to specify the
787 command interpreter to use to run the input file. This is
788 necessary because otherwise SHELL is taken from the user's
789 environment, and not from the makefile that invoked this script
790 and the user might not be running an sh-like shell.
791 * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
792 * fr30/Makefile.in: Likewise.
793 * frv/Makefile.in: Likewise.
794 * i960/Makefile.in: Likewise.
795 * iq2000/Makefile.in: Likewise.
796 * m32r/Makefile.in: Likewise.
798 * frv/mloop.in: Add missing start of line comment marker.
800 2008-07-11 Hans-Peter Nilsson <hp@axis.com>
802 * cris/configure: Regenerate to track ../common/common.m4 changes.
803 * cris/config.in: Ditto.
805 2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
806 Daniel Jacobowitz <dan@codesourcery.com>
807 Joseph Myers <joseph@codesourcery.com>
809 * cris/configure: Regenerate.
811 2008-05-09 Olivier Hainque <hainque@adacore.com>
813 * ppc/altivec.igen (vperm): Latch inputs into temporaries.
815 2008-03-25 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
817 * MAINTAINERS: Add myself as maintainer of cr16 port.
819 2008-02-12 M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
821 Add simulator for National cr16 processor.
822 * cr16: New directory.
823 * configure.ac: Add entry for National cr16.
824 * configure: Regenerate.
826 2008-02-05 DJ Delorie <dj@redhat.com>
828 * configure.ac (v850): V850 now has a testsuite.
829 * configure (v850): Likewise.
831 2008-01-01 Daniel Jacobowitz <dan@codesourcery.com>
833 Updated copyright notices for most files.
835 2007-12-19 DJ Delorie <dj@redhat.com>
837 * frv/frv.c (frvbf_cut): Only look at the six LSBs of
840 2007-10-22 Hans-Peter Nilsson <hp@axis.com>
842 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
843 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
844 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
845 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
846 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
847 cris/semcrisv32f-switch.c: Regenerate.
849 2007-08-24 Joel Brobecker <brobecker@adacore.com>
851 Switch the license of all files explicitly copyright the FSF
854 2007-03-27 Brooks Moses <brooks.moses@codesourcery.com>
856 * Makefile.in: Add dummy "pdf" target.
858 2007-02-20 Hans-Peter Nilsson <hp@axis.com>
860 * cris/traps.c (dump_statistics): Change format for cycle numbers
861 to %llu and cast parameters to unsigned long long.
863 2007-02-16 Thiemo Seufer <ths@mips.com>
865 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
867 2007-01-28 Manuel Lauss <slauss@resi.at>
869 * configure.ac (sh64-*-*): Change to sh64*-*-*.
870 (sh-*-*): Change to sh*-*-*.
871 * configure: Regenerated.
873 2007-01-09 Daniel Jacobowitz <dan@codesourcery.com>
875 Updated copyright notices for most files.
877 2006-12-20 Hans-Peter Nilsson <hp@axis.com>
879 * Makefile.in (autoconf-common autoheader-common): Only run
880 autoheader on subdirs with a file config.in.
882 * configure.ac (common): Make the default "yes" for all targets
884 * configure: Regenerate.
886 * Makefile.in (autoconf-common autoheader-common): In documented
887 usage, say SHELL=/bin/sh.
888 (.PHONY): Add autoheader-common.
890 * MAINTAINERS: Add self as authorized committer for *.
892 2006-10-02 Edgar E. Iglesias <edgar@axis.com>
893 Hans-Peter Nilsson <hp@axis.com>
895 * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
896 (cris_unknown_syscall_action): Declare.
897 * cris/sim-if.c (cris_unknown_syscall_action): Define.
898 (cris_options): Add cris-unknown-syscall option.
899 (cris_option_handler): Correct comment about and error message for
900 invalid --cris-cycles argument. Handle --cris-unknown-syscall.
901 * cris/traps.c: Include stdarg.h
902 (cris_unknown_syscall): New function.
903 (cris_break_13_handler): Instead of sim_io_eprintf and
904 sim_engine_halt, call cris_unknown_syscall to handle more or less
905 unknown syscalls. Adjust code as necessary to handle return
908 2006-09-30 Daniel Jacobowitz <dan@codesourcery.com>
910 * MAINTAINERS: Add Dave Brolley for sh64.
912 2006-09-30 Hans-Peter Nilsson <hp@axis.com>
914 * cris/traps.c (TARGET_PIPE_BUF): New macro.
915 (cris_pipe_empty): Correct initialization of "remaining". Only
916 adjust the "write" return value if more than TARGET_PIPE_BUF bytes
919 2006-09-29 Hans-Peter Nilsson <hp@axis.com>
921 * cris/configure.ac: Check for limits.h and sys/param.h.
922 * cris/configure, cris/config.in: Rebuild.
923 * cris/traps.c (SIM_PATHMAX): New macro.
924 (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
926 2006-08-08 Joel Sherrill <joel.sherrill@oarcorp.com>
928 * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
929 * Makefile.in (FLAGS_TO_PASS): Include libdir.
930 * configure: Regenerated.
932 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
934 * cris/configure: Regenerated.
936 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
938 * cris/configure: Regenerated.
940 2006-05-05 Andreas Schwab <schwab@suse.de>
942 * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
943 * configure: Regenerate.
945 * Makefile.in (CFLAGS_FOR_BUILD): Define.
946 (CC_FOR_BUILD): Don't override.
947 (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
949 2006-05-04 Daniel Jacobowitz <dan@codesourcery.com>
951 * MAINTAINERS: Add an "Authorized committers" section, and list
954 2006-04-08 Hans-Peter Nilsson <hp@axis.com>
956 * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
958 2006-04-03 Hans-Peter Nilsson <hp@axis.com>
960 * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
961 * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
962 (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
963 (all): Depend on rvdummy$(EXEEXT).
964 * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS. Check for
965 sys/socket.h and sys/select.h. Call SIM_AC_OPTION_HARDWARE,
967 * cris/configure: Regenerate.
968 * cris/cris-sim.h (cris_have_900000xxif): Declare here.
969 (enum cris_interrupt_type, crisv10deliver_interrupt)
970 (crisv32deliver_interrupt: New declarations.
971 * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
972 sim_events_tickn and set state-events member work_pending when it's
973 time for the next event.
974 [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
975 interrupt-delivery function.
976 * cris/crisv10f.c (MY (deliver_interrupt)): New function.
977 * cris/crisv32f.c (MY (deliver_interrupt)): New function.
978 * cris/devices.c: Include hw-device.h.
979 (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
980 (device_io_write_buffer): Only perform 0x900000xx-functions if
981 cris_have_900000xxif is nonzero. Else if WITH_HW defined,
982 call hw_io_write_buffer. Add return 0 last in function.
983 * cris/sim-if.c (cris_have_900000xxif): Now global.
984 (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
985 Force "-model" option, effectively.
986 * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
987 (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
989 2006-04-02 Hans-Peter Nilsson <hp@axis.com>
991 * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
992 (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
993 (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
995 2006-03-13 DJ Delorie <dj@redhat.com>
997 * MAINTAINERS: Add self as m32c sim maintainer.
999 2006-02-23 Hans-Peter Nilsson <hp@axis.com>
1001 * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
1003 (cris_break_13_handler) <case TARGET_SYS_time>: New case.
1005 2006-01-23 Jim Blandy <jimb@redhat.com>
1007 Add simulator for Renesas M32C and M16C.
1009 * m32c: New directory.
1010 * configure.ac: Add entry for Renesas M32C.
1011 * configure: Regenerate.
1013 2006-01-10 Hans-Peter Nilsson <hp@axis.com>
1015 * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
1016 cycle count for the current insn.
1018 2005-12-06 Hans-Peter Nilsson <hp@axis.com>
1020 * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
1021 cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
1022 cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
1023 cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
1025 2005-12-05 Hans-Peter Nilsson <hp@axis.com>
1027 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
1028 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
1029 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
1030 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
1031 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
1032 cris/semcrisv32f-switch.c: Regenerate.
1034 2005-11-20 Hans-Peter Nilsson <hp@axis.com>
1036 * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
1037 (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
1039 (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
1040 F_GETFL on fd 0, 1 and 2.
1042 2005-11-17 Hans-Peter Nilsson <hp@axis.com>
1044 * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
1045 last_open_fd, last_open_flags.
1046 * cris/traps.c: Don't include targ-vals.h.
1047 (TARGET_O_ACCMODE): Define.
1048 (cris_break_13_handler): Set new _sim_cpu members.
1049 <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
1050 Rearrange code as switch. Emit "unimplemented" abort for
1051 unimplemented fcntl calls.
1053 * cris/traps.c (TARGET_SYS_stat): Define.
1054 (syscall_stat32_map): Add entry for TARGET_SYS_stat.
1055 (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
1057 2005-11-16 Hans-Peter Nilsson <hp@axis.com>
1059 * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
1060 low 32 bits are used after an unsigned long cast.
1062 2005-05-28 Hans-Peter Nilsson <hp@axis.com>
1064 * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
1066 2005-05-26 Chris Demetriou <cgd@netbsd.org>
1068 * MAINTAINERS: Update my mail address, move myself to the
1069 "Past maintainers" section.
1071 2005-05-17 Corinna Vinschen <vinschen@redhat.com>
1073 * configure.ac: Add igen to v850 build.
1074 * configure: Regenerate.
1076 2005-04-29 Paul Brook <paul@codesourcery.com>
1078 * common/callback.c (PIPE_BUF): Provide default definition.
1079 (os_lstat): Use stat if lstat is not available on the host.
1080 (os_ftruncate): Return EINVAL if not available on the host.
1081 (os_truncate): Ditto.
1082 * common/configure.ac: Check for lstat, truncate and ftruncate.
1083 * common/configure: Regenerate.
1084 * common/config.in: Regenerate.
1086 2005-04-27 Paul Brook <paul@codesourcery.com>
1088 * common/Make-common.in: Add $(EXEEXT) to "run".
1090 2005-04-18 Hans-Peter Nilsson <hp@axis.com>
1092 * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
1093 For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
1094 implemented. In call to create_map, pad length argument to 8k.
1096 2005-04-15 Corinna Vinschen <vinschen@redhat.com>
1098 * configure.ac: Add explicit sh64 case.
1099 * configure: Regenerate.
1101 2005-03-30 Paul Brook <paul@codesourcery.com>
1103 * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
1105 2005-03-24 Hans-Peter Nilsson <hp@axis.com>
1107 * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
1108 include cgen-ops.h in decodev10.c and decodev32.c.
1109 * cris/sim-main.h: Don't include cgen-ops.h here.
1110 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
1111 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
1112 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
1113 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
1114 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
1115 cris/semcrisv32f-switch.c: Regenerate.
1117 * cris/traps.c (cris_break_13_handler) <case
1118 TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
1119 sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
1121 2005-03-23 Mark Kettenis <kettenis@gnu.org>
1123 * cris/configure: Regenerate.
1125 2005-02-28 Jim Blandy <jimb@redhat.com>
1127 * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
1128 mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
1129 Regenerated, after change to common/aclocal.m4.
1131 2005-02-18 Corinna Vinschen <vinschen@redhat.com>
1133 * iq2000: New target subdirectory.
1134 * configure.ac: Add iq2000 target.
1135 * configure: Regenerate.
1137 2005-01-29 Hans-Peter Nilsson <hp@axis.com>
1139 * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
1140 (realclean, install): Fail if subdir make failed.
1142 2005-01-28 Hans-Peter Nilsson <hp@axis.com>
1144 * cris: New directory, simulator for Axis Communications CRIS
1145 including CRIS v32, CGEN-based.
1146 * configure.ac: Add corresponding configury.
1147 * configure: Regenerate.
1149 2005-01-17 Andrew Cagney <cagney@gnu.org>
1151 * configure.ac: For mips*-*-* and mn10300*-*-* configure the
1152 common directory. Remove sparc*-*-* from list.
1154 2005-01-11 Andrew Cagney <cagney@gnu.org>
1156 * Makefile.in (autoconf-common autoheader-common): Add --force to
1157 autoconf and autoheader.
1158 (autoconf-common autoheader-common)
1159 (autoconf-install autoheader-install): Check for configure.ac, not
1161 * configure.ac: Delete AC_CONFIG_AUX_DIR.
1162 * configure: Re-generate.
1164 2005-01-07 Andrew Cagney <cagney@gnu.org>
1166 * configure.ac: Replace configure.in. Requires autoconf 2.59 and
1167 correctly calls AC_CONFIG_SUBDIRS.
1168 * configure: Re-generate.
1170 2004-12-01 Andrew Cagney <cagney@gnu.org>
1172 * i960, h8500: Delete directory.
1174 2004-11-12 Andrew Cagney <cagney@gnu.org>
1176 * d30v, fr30, mn10200, z8k: Delete directory.
1178 2004-03-10 Ben Elliston <bje@gnu.org>
1180 * MAINTAINERS: Update my mail address.
1182 2004-01-26 Chris Demetriou <cgd@broadcom.com>
1184 * configure.in (mips*-*-*): Configure in testsuite.
1185 * configure: Regenerate.
1187 2003-10-08 Dave Brolley <brolley@redhat.com>
1189 * configure.in: Move frv handling to alphabetically correct placement.
1191 2003-09-03 Andreas Schwab <schwab@suse.de>
1193 * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
1195 2003-08-29 Dave Brolley <brolley@redhat.com>
1197 * MAINTAINERS: Add myself as maintainer of the FRV port.
1199 2003-08-20 Michael Snyder <msnyder@redhat.com>
1200 Dave Brolley <brolley@redhat.com>
1202 * frv/: New directory, simulator for the Fujitsu FRV.
1203 * configure.in: Add frv configury.
1204 * configure: Regenerate.
1206 2003-08-10 Ben Elliston <bje@wasabisystems.com>
1208 * MAINTAINERS: Update my mail address.
1210 2003-08-09 Andrew Cagney <cagney@redhat.com>
1212 * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
1213 maintenance. List igen and sh maintainers. Mention that target
1214 and global maintainers pick up the slack.
1216 2003-07-09 Michael Snyder <msnyder@redhat.com>
1218 * configure.in: Add testsuite to extra_subdirs for sh.
1219 * configure: Regenerate.
1221 2003-01-23 Nick Clifton <nickc@redhat.com>
1225 2002-04-02 Alexandre Oliva <aoliva@redhat.com>
1227 * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
1229 2002-08-24 Geoffrey Keating <geoffk@redhat.com>
1231 * MAINTAINERS: Update my email address.
1233 2002-07-17 Andrew Cagney <ac131313@redhat.com>
1235 * w65/: Delete directory.
1237 2002-07-16 Andrew Cagney <ac131313@redhat.com>
1239 * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
1240 * configure: Re-generate.
1242 2002-07-13 Andrew Cagney <ac131313@redhat.com>
1244 * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
1245 * configure: Re-generate.
1247 2002-06-16 Andrew Cagney <ac131313@redhat.com>
1249 * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
1250 id, date and host to be overriden by NAME, ID, DATE and HOST
1251 respectfully. Use ISO dates.
1253 Thu Jun 6 12:34:13 2002 Andrew Cagney <cagney@redhat.com>
1255 * Makefile.in (ChangeLog): New makefile variable.
1256 * README-HACKING: Mention the ChangeLog makefile variable.
1258 2002-06-01 Andrew Cagney <ac131313@redhat.com>
1260 * tic80/: Delete directory.
1262 2002-05-16 Stephane Carrez <stcarrez@nerim.fr>
1264 * MAINTAINERS: Update my email address.
1266 2002-03-06 Stephane Carrez <Stephane.Carrez@worldnet.fr>
1268 * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
1270 2002-03-01 Frank Ch. Eigler <fche@redhat.com>
1272 * MAINTAINERS: Record self as a co-maintainer of just common/.
1274 2002-02-07 Nick Clifton <nickc@cambridge.redhat.com>
1276 * MAINTAINERS: Point to GDB files describing overall maintaince
1277 and check-in procedures.
1279 2002-01-10 Nick Clifton <nickc@cambridge.redhat.com>
1281 * MAINTAINERS: Add myself for ARM portions.
1283 2001-10-19 Andrew Cagney <ac131313@redhat.com>
1285 * configure.in: When Linux or NetBSD, enable PowerPC simulator.
1286 * configure: Re-generate.
1288 2001-02-16 Ben Elliston <bje@redhat.com>
1290 * MAINTAINERS: Add myself for common portions.
1292 2001-01-15 Chris Demetriou <cgd@broadcom.com>
1294 * MAINTAINERS: Added self and Andrew for the mips sim.
1296 2000-10-25 Geoff Keating <geoffk@cygnus.com>
1298 * MAINTAINERS: Added self and Andrew for the ppc sim.
1300 Thu Jul 27 21:26:26 2000 Andrew Cagney <cagney@b1.cygnus.com>
1302 From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
1303 * m68hc11: New directory.
1304 * configure.in: Add.
1305 * configure: Regenerate.
1307 Tue Jul 4 13:43:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
1309 * tic80: New directory.
1310 * configure.in: Add configury.
1311 * configure: Regenerate.
1313 2000-04-20 Nick Clifton <nickc@cygnus.com>
1315 * configure.in (extra_subdirs): Add testsuite to strongarm
1317 * configure: Regenerate.
1319 Sat Mar 4 16:48:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
1321 * MAINTAINERS: New file. Blank.
1323 1999-11-18 Ben Elliston <bje@cygnus.com>
1325 * configure.in: Require autoconf 2.13 and remove obsolete
1326 invocation of AC_C_CROSS.
1327 * configure: Regenerate.
1329 1999-09-29 Doug Evans <devans@casey.cygnus.com>
1331 * configure.in: Configure the testsuite directory for thumb.
1332 * configure: Regenerate.
1334 1999-07-16 Ben Elliston <bje@cygnus.com>
1336 * configure.in: Configure the testsuite directory for arm.
1337 * configure: Regenerate.
1339 1999-04-08 Nick Clifton <nickc@cygnus.com>
1341 * configure.in: Add support for MCore target.
1342 * configure: Regenerate.
1344 1999-03-14 Stan Shebs <shebs@andros.cygnus.com>
1346 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
1347 RUNTEST instead of commenting out, fixes portability problem.
1349 1999-02-08 Nick Clifton <nickc@cygnus.com>
1351 * configure.in: Add support for StrongARM target.
1352 * configure: Regenerate.
1354 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
1356 * configure.in: Require autoconf 2.12.1 or higher.
1358 1998-12-08 James E Wilson <wilson@wilson-pc.cygnus.com>
1360 * configure.in (i960-*-*): Add.
1361 * configure: Rebuild.
1363 Wed Nov 4 19:11:43 1998 Dave Brolley <brolley@cygnus.com>
1365 * configure.in: Added case for fr30-*-*.
1366 * configure: Regenerated.
1368 Fri Sep 25 10:12:19 1998 Christopher Faylor <cgf@cygnus.com>
1370 * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
1371 to allow successful operation on Windows.
1373 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
1375 * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
1376 check can be invoked recursively.
1378 Wed Apr 29 12:38:53 1998 Mark Alexander <marka@cygnus.com>
1380 * configure.in: Build simulator on sparclite and sparc86x targets.
1381 * configure: Regenerate.
1383 Sun Apr 26 15:21:01 1998 Tom Tromey <tromey@cygnus.com>
1385 * Makefile.in (autoconf-common autoheader-common): Don't pass -l
1386 to autoconf and autoheader.
1388 Fri Apr 24 11:14:13 1998 Tom Tromey <tromey@cygnus.com>
1390 * Makefile.in (autoconf-common autoheader-common): Pass `-l
1391 ../common' to autoconf and autoheader. Unconditionally run
1392 autoconf in every subdir.
1393 (autoconf-changelog autoheader-changelog): Unconditionally run
1394 commands in every subdir.
1395 (autoconf-install autoheader-install): Likewise.
1397 Tue Mar 24 17:12:43 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk>
1399 * Makefile.in: Get SHELL from configure.
1400 * (FLAGS_TO_PASS): Pass down SHELL.
1401 * configure: Regenerate with autoconf 2.12.1 to fix shell issues for
1404 Tue Mar 24 11::18:00 1998 Joyce Janczyn <janczyn@cygnus.com>
1406 * configure.in (extra_subdirs): Enable igen for mn10300.
1407 * configure: Re-generate.
1409 Tue Dec 2 10:10:42 1997 Nick Clifton <nickc@cygnus.com>
1411 * configure.in (extra_subdirs): Add support for thumb target.
1413 * configure (extra_subdirs): Add support for thumb target.
1415 Wed Oct 8 12:38:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
1417 * configure.in (extra_subdirs): Add IGEN directory when MIPS
1419 * configure: Regenerate.
1421 Fri Sep 12 13:10:31 1997 Andrew Cagney <cagney@b1.cygnus.com>
1423 * configure.in (extra_subdirs): v850ea needs igen.
1424 * configure: Re-generate.
1426 Mon Sep 1 16:48:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
1428 * configure.in (testdir): When a testsuite directory, add that to
1429 the list of confdirs.
1431 Tue Aug 19 11:17:46 1997 Andrew Cagney <cagney@b1.cygnus.com>
1433 * configure.in (extra_subdirs): Enable igen ready for V850.
1435 Tue Aug 26 15:14:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
1437 * configure.in (w65-*-*, only_if_enabled): Set.
1438 * configure: Re-generate.
1440 Mon Aug 25 16:26:53 1997 Andrew Cagney <cagney@b1.cygnus.com>
1442 * configure.in (sparc*-*-*, only_if_enabled): Set
1443 only_if_enabled=yes. Check only_if_enabled before enabling a
1445 * configure: Regenerate.
1447 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
1449 * configure.in (extra_subdirs): Add v850e target.
1451 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
1453 * configure.in (extra_subdirs): Add v850ea target.
1455 Fri Jul 25 11:40:47 1997 Doug Evans <dje@canuck.cygnus.com>
1457 * configure.in (sparc*-*-*): Don't build erc32.
1458 * configure: Regenerate.
1460 Thu Apr 24 00:47:20 1997 Doug Evans <dje@canuck.cygnus.com>
1462 * configure.in (m32r-*-*): New target.
1463 * configure: Regenerate.
1465 * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
1467 Mon Apr 21 22:57:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
1469 * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
1470 thought that .NOEXPORT was the default target.
1472 Fri Apr 11 17:18:07 1997 Ian Lance Taylor <ian@cygnus.com>
1474 * Makefile.in (clean mostlyclean): Restore targets accidentally
1475 deleted in earlier change.
1477 Thu Apr 3 12:20:32 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1479 * Makefile.in (autoheader-common, autoheader-changelog,
1480 autoheader-install): Perform autoheader in addition to autoconf.
1482 Wed Apr 2 15:09:05 1997 Doug Evans <dje@canuck.cygnus.com>
1484 * Makefile.in (autoconf-install): New target.
1485 (autoconf-changelog): Try different way to obtain user name.
1487 Wed Apr 2 14:25:52 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1489 * Makefile.in (autoconf-changelog): New target, update
1490 ChangeLog for all subdirectories - normally used after
1491 autoconf-common target.
1493 Wed Mar 19 14:26:21 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1495 * configure.in (extra_subdirs): Include testsuite for d30v.
1496 * configure: Regenerate.
1498 * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1500 (check): New rules - drive the testsuite.
1502 Mon Mar 3 13:01:00 1997 Jeffrey A Law (law@cygnus.com)
1504 * configure.in: Add mn10200 configure lines accidentally
1506 * configure: Regenerated.
1508 Wed Feb 19 10:34:20 1997 Andrew Cagney <cagney@critters.cygnus.com>
1510 * configure.in (extra_subdirs): Generalize common sub directory
1512 (extra_subdirs): For d30v add igen to the list to be built.
1514 Sun Feb 16 16:37:47 1997 Andrew Cagney <cagney@critters.cygnus.com>
1516 * configure.in (d30v): New target.
1517 * configure: Regenerated.
1519 Wed Feb 19 23:17:13 1997 Jeffrey A Law (law@cygnus.com)
1521 * configure.in: Don't require GCC to build the mn10200
1523 * configure: Rebuilt.
1525 Wed Feb 5 13:28:13 1997 Doug Evans <dje@canuck.cygnus.com>
1527 * configure.in: Don't configure any subdirs if no simulator
1528 is being built. Don't use erc32 for sparc64.
1529 * configure: Regenerated.
1531 Tue Feb 4 13:19:39 1997 Doug Evans <dje@canuck.cygnus.com>
1533 * Makefile.in (autoconf-common): New target.
1534 * configure.in: Do configure common.
1535 * configure: Regenerated.
1537 Thu Jan 23 13:59:52 1997 Stu Grossman (grossman@critters.cygnus.com)
1539 * configure configure.in: Don't configure common anymore. Files
1540 from common are now built in the individual simualtor directories.
1541 This fixes problems with the WinGDB build procedure.
1543 Mon Jan 13 13:16:42 1997 Jeffrey A Law (law@cygnus.com)
1545 * configure: Enable the mn10200 simulator.
1547 Wed Nov 20 01:00:36 1996 Doug Evans <dje@canuck.cygnus.com>
1549 * configure.in (configdirs): Add common.
1550 * configure: Regenerated.
1552 Fri Nov 1 08:03:30 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1554 * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1555 system V based targets.
1556 * configure: Regenerate.
1558 Thu Oct 17 12:50:08 1996 Doug Evans <dje@canuck.cygnus.com>
1560 * configure.in (--enable-sim-powerpc): Delete.
1561 (--enable-sim): Add.
1562 * configure: Regenerated.
1564 Fri Oct 11 21:13:43 1996 Jeffrey A Law (law@cygnus.com)
1566 * configure.in: Only build the V850 simulator if
1568 * configure: Rebuild.
1570 Sun Sep 8 17:22:50 1996 Ian Lance Taylor <ian@cygnus.com>
1572 * configure.in: Do build erc32 for DOS and Windows hosts.
1573 * configure: Rebuild.
1575 Wed Sep 4 18:11:27 1996 Stu Grossman (grossman@critters.cygnus.com)
1577 * Makefile.in erc32/Makefile.in: Don't set srcroot. This should
1578 be inherited from the parent. Remove INSTALL_XFORM and
1579 INSTALL_XFORM1. Make INSTALL be set from configure.
1581 Wed Sep 4 15:49:16 1996 Ian Lance Taylor <ian@cygnus.com>
1583 * configure.in: Only build the MIPS simulator if we are using
1585 * configure: Rebuild.
1587 Wed Aug 28 19:05:23 1996 Jeffrey A Law (law@cygnus.com)
1589 * configure.in (v850-*-*): Added V850 simulator.
1591 Thu Aug 1 17:08:41 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1593 * configure.in (d10v-*-*): Added D10V simulator.
1595 Wed Jun 26 12:33:57 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1597 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1598 INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1600 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1601 (AC_PROG_INSTALL): Added.
1602 * configure: Rebuilt.
1604 Mon Jun 24 14:18:26 1996 Ian Lance Taylor <ian@cygnus.com>
1606 * configure.in: Only configure erc32 if using gcc.
1607 * configure: Rebuild.
1609 Tue Jun 4 09:24:21 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1611 * configure.in (sim_target): Build PowerPC simulator for powerpc
1612 System V.4, Solaris, and Elf targets.
1613 * configure: Regenerate with autoconf 2.10.
1615 Wed May 22 12:10:49 1996 Rob Savoye <rob@chinadoll>
1617 * configure.in: Only built erc32 simulator on Unix hosts as it
1619 * configure: Regenerated with autoconf 2.8.
1621 Sun May 19 20:20:40 1996 Rob Savoye <rob@chinadoll.cygnus.com>
1623 * erc32: Sparc simulator from the ESA.
1625 Sun Apr 7 21:00:09 1996 Fred Fish <fnf@cygnus.com>
1627 From: Miles Bader <miles@gnu.ai.mit.edu>
1628 * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1629 * configure: Regenerate using autoconf.
1631 Thu Feb 22 11:31:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1633 * Makefile.in (install): Fix typo.
1635 Wed Feb 21 11:59:57 1996 Ian Lance Taylor <ian@cygnus.com>
1637 * configure: Regenerate with autoconf 2.7.
1639 * Makefile.in (all): Simplify.
1640 (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1641 as in the all target.
1642 (distclean, maintainer-clean, realclean): Likewise.
1643 (install): Likewise.
1645 Thu Feb 15 18:37:00 1996 Fred Fish <fnf@cygnus.com>
1647 * Makefile.in (all): Remove extra '\' char from shell script.
1649 Wed Feb 14 16:43:59 1996 Mike Meissner <meissner@tiktok.cygnus.com>
1651 * Makefile.in (all): Avoid a for loop with zero elements, even if
1652 the loop will not be executed because of an if statement.
1654 Wed Jan 31 21:48:34 1996 Fred Fish <fnf@cygnus.com>
1656 * Makefile.in (install): Add missing semicolon in "fi \".
1658 Thu Nov 9 16:10:56 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1660 * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1661 defaults from configure.
1663 * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1665 (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1666 if either --enable-sim-powerpc is used, or the host compiler is
1669 Wed Nov 8 15:46:49 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
1671 * configure.in (mips*-*-*): Added "mips" simulator target.
1672 * configure: Re-generated.
1674 Tue Oct 10 11:08:20 1995 Fred Fish <fnf@cygnus.com>
1676 * Makefile.in (BISON): Remove macro.
1677 (FLAGS_TO_PASS): Remove BISON.
1679 Sun Oct 8 04:26:27 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1681 * configure.in: Explicitly `exit 0' for broken shells.
1682 * configure: Rebuilt.
1684 Fri Oct 6 12:03:27 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1686 * common/run.c (main): Initialize the callbacks.
1688 Wed Sep 20 13:34:50 1995 Ian Lance Taylor <ian@cygnus.com>
1690 * Makefile.in (maintainer-clean): New synonym for realclean.
1692 Fri Aug 25 11:53:43 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1694 * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1695 the target is powerpc*-*-eabisim*, since it requires GCC to build.
1697 Mon Aug 21 17:53:48 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1699 * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1700 <cagney@highland.com.au>.
1701 * configure: Regnerate from configure.in.
1703 Thu Aug 3 10:45:37 1995 Fred Fish <fnf@cygnus.com>
1705 * Update all FSF addresses except those in COPYING* files.
1707 Thu Jul 20 15:17:29 1995 Fred Fish <fnf@cygnus.com>
1709 * Makefile.in (CC_FOR_BUILD): Define default and arrange to pass
1710 submakes either default or passed in value.
1712 Wed Jul 5 14:32:54 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1714 * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1715 install): Changed targets so that they descend all
1716 subdirectories in $(SUBDIRS).
1717 (*-all, *-clean, *-install): Removed targets.
1719 * configure.in: Don't bother with target makefile fragments, they
1720 are no longer needed.
1721 * configure: regenerated.
1723 * Makefile.in, configure.in: converted to autoconf.
1724 * configure: New file, generated with autconf 2.4.
1726 Wed May 24 14:48:46 1995 Steve Chamberlain <sac@slash.cygnus.com>
1728 * Makefile.in: Support ARM.
1729 * configure.in: Ditto.
1731 Sun Jan 15 16:53:47 1995 Steve Chamberlain <sac@splat>
1733 * Makefile.in: Support W65.
1734 * configure.in: Ditto.
1736 Sun Mar 13 09:27:50 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1738 * Makefile.in: Add TAGS target.
1740 Mon Sep 13 12:47:15 1993 K. Richard Pixley (rich@sendai.cygnus.com)
1742 * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1743 install-h8300, clean-h8300, all-h8500, install-h8500,
1744 clean-h8500, all-sh, install-sh, clean-sh): do not echo
1747 Wed Jun 30 14:12:05 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
1749 * Makefile.in: remove endian.h trace from h8500
1751 Sun Jun 13 13:08:58 1993 Jim Kingdon (kingdon@cygnus.com)
1753 * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1755 Fri May 21 11:21:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1757 * Makefile.in: make all of the all-* target (except all-nothing)
1758 depend on endian.h, so that if we're not building a simulator, we
1761 Fri May 21 10:55:06 1993 Ian Lance Taylor (ian@cygnus.com)
1763 * Makefile.in (check, installcheck): Added dummy targets.
1765 Mon May 3 21:39:43 1993 Fred Fish (fnf@cygnus.com)
1767 * Makefile.in (endian): Find endian.c in $(srcdir), and also
1768 explicitly make it, since some makes apparently don't work with
1769 VPATH and .c to executable rules (SunOS make for example).
1771 Mon May 3 08:29:01 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1773 * Makefile.in (endian): Add explicit rule for broken makes.
1775 Mon Mar 15 15:47:53 1993 Ian Lance Taylor (ian@cygnus.com)
1777 * Makefile.in (info, install-info): New targets.
1778 (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1781 Wed Feb 10 20:12:27 1993 K. Richard Pixley (rich@ok.cygnus.com)
1783 * Makefile.in (endian.h): build endian.h via a temporary file so
1784 that we don't leave an incomplete file lying around on
1786 (clean): remove endian, e.h, and endian.h.
1788 Mon Feb 8 11:46:06 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1790 * Makefile.in, configure.in: if target isn't supported, build a