1 2013-11-07 Will Newton <will.newton@linaro.org>
4 * arm/wrapper.c (sim_create_inferior): Avoid calling
5 bfd_get_mach with a NULL bfd.
7 2013-06-21 Nick Clifton <nickc@redhat.com>
9 * msp430: New Directory.
10 * configure.tgt: Add it.
11 * configure: Regenerate.
13 2013-03-15 Steve Ellcey <sellcey@mips.com>
15 * arm/wrapper.c (sim_complete_command): Make char arguments const.
16 * avr/interp.c (sim_complete_command): Ditto.
17 * common/sim-options.c (sim_complete_command): Ditto.
18 * cr16/interp.c (sim_complete_command): Ditto.
19 * erc32/interf.c (sim_complete_command): Ditto.
20 * m32c/gdb-if.c (sim_complete_command): Ditto.
21 * microblaze/interp.c (sim_complete_command): Ditto.
22 * ppc/sim_calls.c (sim_complete_command): Ditto.
23 * rl78/gdb-if.c (sim_complete_command): Ditto.
24 * rx/gdb-if.c (sim_complete_command): Ditto.
25 * sh/interp.c (sim_complete_command): Ditto.
27 2013-01-01 Joel Brobecker <brobecker@adacore.com>
29 Update year range in copyright notice of all files.
31 2012-12-19 Joel Brobecker <brobecker@adacore.com>
33 Update old contact info in GPL license notices.
35 2012-12-19 Joel Brobecker <brobecker@adacore.com>
37 Update the non-FSF-copyrighted files in sim to GPLv3 or later.
39 2012-11-20 Pavel Chupin <pavel.v.chupin@intel.com>
41 * common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS
43 * common/acinclude.m4: Define lt_cv_dlopen_libs.
44 * arm/configure: Regenerate.
45 * avr/configure: Regenerate.
46 * bfin/configure: Regenerate.
47 * common/configure: Regenerate.
48 * cr16/configure: Regenerate.
49 * cris/configure: Regenerate.
50 * d10v/configure: Regenerate.
51 * erc32/configure: Regenerate.
52 * frv/configure: Regenerate.
53 * h8300/configure: Regenerate.
54 * igen/configure: Regenerate.
55 * iq2000/configure: Regenerate.
56 * lm32/configure: Regenerate.
57 * m32c/configure: Regenerate.
58 * m32r/configure: Regenerate.
59 * m68hc11/configure: Regenerate.
60 * mcore/configure: Regenerate.
61 * microblaze/configure: Regenerate.
62 * mips/configure: Regenerate.
63 * mn10300/configure: Regenerate.
64 * moxie/configure: Regenerate.
65 * ppc/configure: Regenerate.
66 * rl78/configure: Regenerate.
67 * rx/configure: Regenerate.
68 * sh/configure: Regenerate.
69 * sh64/configure: Regenerate.
70 * testsuite/configure: Regenerate.
71 * v850/configure: Regenerate.
73 2012-11-05 Stephane Carrez <Stephane.Carrez@gmail.com>
75 * MAINTAINERS: Update my email address.
77 2012-09-24 Steve Ellcey <sellcey@mips.com>
79 * mips/basic.exp: Add mips*-mti-elf* target.
80 * configure.ac: Add mips*-mti-elf* target.
81 * configure: Regenerate.
83 2012-06-15 Joel Brobecker <brobecker@adacore.com>
85 * configure: Regenerate.
87 2012-06-06 Michael Eager <eager@eagercon.com>
89 * microblaze/interp.c (config.h): Add #include.
91 2011-11-29 Joel Brobecker <brobecker@adacore.com>
93 * MAINTAINERS (Global Maintainers): New section. Add Mike
96 2011-11-28 DJ Delorie <dj@redhat.com>
98 * configure.tgt: Add rl78 support.
99 * configure: Regenerate.
100 * rl78: New directory.
101 * MAINTAINERS: Add myself as RL78 maintainer.
103 2011-07-08 Hans-Peter Nilsson <hp@axis.com>
105 * MAINTAINERS: Remove Thiemo Seufer.
107 2011-06-04 Mike Frysinger <vapier@gentoo.org>
109 * configure.tgt (bfin-*-*): Add sim_testsuite=yes.
110 * configure: Regenerate.
112 2011-05-04 Joseph Myers <joseph@codesourcery.com>
114 * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
116 * configure: Regenerate.
118 2011-03-05 Mike Frysinger <vapier@gentoo.org>
120 * MAINTAINERS: Add bfin entry.
121 * configure.tgt (bfin-*-*): Handle bfin targets.
122 * configure: Regenerate.
124 2011-01-05 Mike Frysinger <vapier@gentoo.org>
126 * .gitignore: Add /*/hw-config.h.
128 2010-12-23 Mike Frysinger <vapier@gentoo.org>
130 * .gitignore: New file.
132 2010-07-28 DJ Delorie <dj@redhat.com>
134 * MAINTAINERS: Add self as RX maintainer. Sort list.
136 2010-06-08 Nick Clifton <nickc@redhat.com>
138 * reg.c (set_oszc): Use unsigned int for the mask.
139 (set_szc, set_osz, set_sz): Likewise.
141 2010-04-26 Mike Frysinger <vapier@gentoo.org>
143 * configure.ac: Target logic moved out to and included from ...
144 * configure.tgt: ... this new file.
145 * configure: Regenerated.
147 2010-04-12 Mike Frysinger <vapier@gentoo.org>
149 * README-HACKING: Add more sections.
151 2010-02-11 Doug Evans <dje@sebabeach.org>
153 * cris/cpuv10.h, * cris/cpuv32.h, * cris/cris-desc.c,
154 * cris/cris-desc.h, * cris/decodev10.c, * cris/decodev32.c,
155 * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
156 * cris/semcrisv32f-switch.c: Regenerate.
158 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
160 * avr/configure: Regenerate.
161 * cris/configure: Regenerate.
162 * microblaze/configure: Regenerate.
164 2010-01-02 Doug Evans <dje@sebabeach.org>
166 * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c,
167 * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c,
168 * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c,
169 * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h,
170 * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
171 * cris/semcrisv32f-switch.c: Regenerate, update copyright year.
173 2010-01-01 Doug Evans <dje@sebabeach.org>
175 * cris/mloop.in: Fix copyright year update snafu.
177 2009-11-24 Joel Brobecker <brobecker@adacore.com>
179 * common/aclocal.m4: Add include of ../../config/zlib.m4.
180 * common/common.m4: Use AM_ZLIB to check for zlib support.
181 * ppc/configure.ac: Likewise.
182 * arm/configure, avr/configure, common/configure, cr16/configure,
183 cris/configure, d10v/configure, erc32/configure, frv/configure,
184 h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
185 m32r/configure, m68hc11/configure, mcore/configure,
186 microblaze/configure, mips/configure, mn10300/configure,
187 moxie/configure, ppc/configure, sh/configure, sh64/configure,
188 v850/configure: Regenerate.
190 2009-11-24 DJ Delorie <dj@redhat.com>
193 * configure.ac: Add entry for Renesas RX.
194 * configure: Regenerate.
196 2009-11-22 Doug Evans <dje@sebabeach.org>
198 * cris/cpuall.h: Regenerate.
199 * cris/cpuv10.h: Regenerate.
200 * cris/cpuv32.h: Regenerate.
201 * cris/decodev10.c: Regenerate.
202 * cris/decodev10.h: Regenerate.
203 * cris/decodev32.c: Regenerate.
204 * cris/decodev32.h: Regenerate.
206 2009-11-12 Tristan Gingold <gingold@adacore.com>
208 * avr/interp.c (sim_write): Allow byte access.
211 2009-11-12 Tristan Gingold <gingold@adacore.com>
213 * avr/interp.c (sim_load): Clear memory before loading.
215 2009-11-09 Tristan Gingold <gingold@adacore.com>
217 * avr/interp.c (sim_resume): Fix typo for OP_ret.
219 2009-10-23 Doug Evans <dje@sebabeach.org>
221 * cris/arch.c: Regenerate.
222 * cris/arch.h: Regenerate.
223 * cris/cpuall.h: Regenerate.
224 * cris/cpuv10.c: Regenerate.
225 * cris/cpuv10.h: Regenerate.
226 * cris/cpuv32.c: Regenerate.
227 * cris/cpuv32.h: Regenerate.
228 * cris/cris-desc.c: Regenerate.
229 * cris/cris-desc.h: Regenerate.
230 * cris/cris-opc.h: Regenerate.
231 * cris/decodev10.c: Regenerate.
232 * cris/decodev10.h: Regenerate.
233 * cris/decodev32.c: Regenerate.
234 * cris/decodev32.h: Regenerate.
235 * cris/modelv10.c: Regenerate.
236 * cris/modelv32.c: Regenerate.
237 * cris/semcrisv10f-switch.c: Regenerate.
238 * cris/semcrisv32f-switch.c: Regenerate.
240 2009-10-22 Tristan Gingold <gingold@adacore.com>
242 * avr/interp.c (sim_stop): Return 1.
244 2009-10-16 Doug Evans <dje@sebabeach.org>
246 * MAINTAINERS: Add myself as m32r maintainer.
248 2009-10-15 Michael Egaer <eager@eagercon.com>
250 * MAINTAINERS: Add self as MicroBlaze maintainer.
252 2009-10-14 Ben Elliston <bje@gnu.org>
254 * MAINTAINERS (common): Move myself to "past maintainers" section.
256 2009-10-06 Michael Eager <eager@eagercon.com>
258 * microblaze/interp.c: Add include microblaze-dis.h.
260 2009-09-23 Michael Eager <eager@eagercon.com>
262 * configure: Add microblaze-*.* (not regenerated).
263 * configure.ac: Likewise.
264 * microblaze/config.in: New.
265 * microblaze/configure: Generate.
266 * microblaze/configure.ac: New.
267 * microblaze/interp.c: New.
268 * microblaze/Makefile.in: New.
269 * microblaze/microblaze.h: New.
270 * microblaze/microblaze.isa: New.
271 * microblaze/sim-main.h: New.
272 * microblaze/sysdep.h: New.
274 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
276 * avr/config.in: Regenerate.
277 * avr/configure: Likewise.
278 * configure: Likewise.
279 * cris/config.in: Likewise.
280 * cris/configure: Likewise.
282 * configure.ac: m4_include toplevel config/override.m4.
283 * configure: Regenerate.
284 * avr/configure: Regenerate.
285 * cris/configure: Regenerate.
287 2009-07-30 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
289 * Makefile.in (datarootdir): New variable.
291 2009-05-18 Jon Beniston <jon@beniston.com>
293 * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
294 * configure.ac: Add lm32 target.
295 * lm32: New directory.
297 2009-05-11 Andrew Cagney <cagney@gnu.org>
299 * MAINTAINERS: Orphan ppc.
301 2009-05-08 Kevin Buettner <kevinb@redhat.com>
303 * m32c/gdb-if.c (m32c_signal_to_host): Rename to
304 m32c_signal_to_target. Change signal return values from SIGILL,
305 SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
306 TARGET_SIGNAL_SEGV, etc. Fix all callers.
308 2009-04-30 Anthony Green <green@moxielogic.com>
310 * MAINTAINERS: Add myself for the moxie port.
311 * moxie: New directory.
312 * configure.ac: Add entry for moxie.
313 * configure: Regenerate.
315 2009-04-27 Tristan Gingold <gingold@adacore.com>
317 * avr: New directory.
318 * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
319 * avr/config.in: New file, generated by autoheader.
320 * avr/configure: New file generated by autoconf.
321 * configure.ac: Add avr.
322 * configure: Regenerated.
324 2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
326 * Makefile.in: Add dummy install-pdf, html, and
327 install-html targets.
329 2009-01-18 Hans-Peter Nilsson <hp@axis.com>
331 * cris/sim-if.c: Include errno.h.
332 (cris_start_address, cris_program_offset): New variables.
333 (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
335 (cris_options): New options --cris-program-offset and
336 --cris-start-address.
337 (cris_option_handler): Handle new options.
338 (cris_program_offset_write, cris_set_section_offset_iterator)
339 (cris_offset_sections, cris_offset_sections): New functions.
340 (sim_load): Use cris_program_offset_write as function argument to
341 cris_load_elf_file, not sim_write.
342 (struct offsetinfo): New struct.
343 (cris_handle_interpreter): Fix typo in comment.
344 (sim_open): Call cris_offset_sections as soon as the bfd of the
345 infile is available. Gate bfd validity checks on abfd non-NULL.
346 (sim_create_inferior): Let cris_start_address when != -1 override
347 other start-address choices.
349 2009-01-06 Hans-Peter Nilsson <hp@axis.com>
351 * cris/traps.c (abort): Define to call sim_io_error.
352 (create_map): Make -1 imply a non-fixed address, not 0. All
353 callers changed. Only prefer the next higher unmapped address if
354 the last mapped address is no less than 0x40000000. Check that
355 the address to be mapped is not already mapped. Update head
357 (unmap_pages): Don't call abort when recursive call fails, just
358 note and return an error if a page in the range couldn't be unmapped.
359 (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
360 (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
361 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
362 non-MAP_FIXED argument overlapping existing map. For MAP_FIXED,
363 don't abort on page not being mapped. Handle non-anon filemap
364 with length padded to pagesize.
366 2009-01-03 Hans-Peter Nilsson <hp@axis.com>
368 * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
369 (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
370 (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
371 (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
372 (TARGET_AT_CLKTCK): Remove redundant macros.
373 (AUX_ENT): Adjust to use standard ELF AT_* macros.
374 (AUX_ENTF): Ditto. Remove always-0 middle argument. Update all
376 (sim_open): Also pass AT_SECURE.
378 * cris/sim-main.h (struct _sim_cpu): New member
379 set_target_thread_data.
380 * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
381 * cris/crisv10f.c: Ditto.
382 * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
383 (MY (f_specific_init)): Set new _sim_cpu member to new function.
384 * cris/traps.c (TARGET_SYS_set_thread_area): Define.
385 (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
388 * cris/traps.c (TARGET_SYS_exit_group): Define.
389 (cris_break_13_handler): Handle it like the exit for the last
392 * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
393 (TARGET_EPOCH): Update to match TARGET_UTSNAME. Correct comment.
394 (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
395 2.6.27. Set machine field to the BFD printable name of the
398 * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
399 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
400 TARGET_MAP_DENYWRITE.
402 * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
403 (TARGET_X_OK, TARGET_F_OK): Define.
404 (cris_break_13_handler) <case TARGET_SYS_access>: New case.
406 * cris/semcrisv32f-switch.c: Regenerate.
408 2008-12-30 Hans-Peter Nilsson <hp@axis.com>
410 * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
411 just a short CRIS-specific notice. Tweak the wording for a
412 failing architecture test.
414 * cris/traps.c (TARGET_SYS_writev): New macro.
415 (is_mapped_only, cris_dump_map): New functions.
416 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
417 and prot combinations and a non-zero page-offset. If
418 TARGET_MAP_FIXED, unmap pages before mapping them.
419 <case TARGET_SYS_mprotect>: When checking, allow any length
420 argument. Don't actually do anything.
421 <case TARGET_SYS_writev>: New case.
423 * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
424 * cris/sim-if.c: Include elf-bfd.h.
425 (struct progbounds): New members end_loadmem, start_nonloadmem.
426 (xprintf, eprintf): New functions, copied from common/sim-load.c.
427 (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
428 (get_progbounds_iterator): Renamed from get_progbounds. Make
429 static. Update head comment. Set new struct progbounds members.
430 (exec_load_addr, interp_load_addr, interp_start_addr): New static
432 (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
433 (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
435 (sim_open): New constant array auxv_entries. Rewrite AUX_ENT
436 handling to use auxv_entries. Improve error message and checking
437 for invalid programs. Use new variable abfd for the program
438 instead of for each access reaching into sd to get it.
439 (sim_create_inferior): If non-zero, use interp_start_addr instead
440 of the program start address.
441 (cris_disassemble_insn): Remove incorrect and unclear, supposedly
442 stale comment. Always specify little-endian.
444 2008-07-29 Nick Clifton <nickc@redhat.com>
446 * common/genmloop.sh: Add new parameter: -shell to specify the
447 command interpreter to use to run the input file. This is
448 necessary because otherwise SHELL is taken from the user's
449 environment, and not from the makefile that invoked this script
450 and the user might not be running an sh-like shell.
451 * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
452 * fr30/Makefile.in: Likewise.
453 * frv/Makefile.in: Likewise.
454 * i960/Makefile.in: Likewise.
455 * iq2000/Makefile.in: Likewise.
456 * m32r/Makefile.in: Likewise.
458 * frv/mloop.in: Add missing start of line comment marker.
460 2008-07-11 Hans-Peter Nilsson <hp@axis.com>
462 * cris/configure: Regenerate to track ../common/common.m4 changes.
463 * cris/config.in: Ditto.
465 2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
466 Daniel Jacobowitz <dan@codesourcery.com>
467 Joseph Myers <joseph@codesourcery.com>
469 * cris/configure: Regenerate.
471 2008-05-09 Olivier Hainque <hainque@adacore.com>
473 * ppc/altivec.igen (vperm): Latch inputs into temporaries.
475 2008-03-25 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
477 * MAINTAINERS: Add myself as maintainer of cr16 port.
479 2008-02-12 M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
481 Add simulator for National cr16 processor.
482 * cr16: New directory.
483 * configure.ac: Add entry for National cr16.
484 * configure: Regenerate.
486 2008-02-05 DJ Delorie <dj@redhat.com>
488 * configure.ac (v850): V850 now has a testsuite.
489 * configure (v850): Likewise.
491 2008-01-01 Daniel Jacobowitz <dan@codesourcery.com>
493 Updated copyright notices for most files.
495 2007-12-19 DJ Delorie <dj@redhat.com>
497 * frv/frv.c (frvbf_cut): Only look at the six LSBs of
500 2007-10-22 Hans-Peter Nilsson <hp@axis.com>
502 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
503 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
504 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
505 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
506 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
507 cris/semcrisv32f-switch.c: Regenerate.
509 2007-08-24 Joel Brobecker <brobecker@adacore.com>
511 Switch the license of all files explicitly copyright the FSF
514 2007-03-27 Brooks Moses <brooks.moses@codesourcery.com>
516 * Makefile.in: Add dummy "pdf" target.
518 2007-02-20 Hans-Peter Nilsson <hp@axis.com>
520 * cris/traps.c (dump_statistics): Change format for cycle numbers
521 to %llu and cast parameters to unsigned long long.
523 2007-02-16 Thiemo Seufer <ths@mips.com>
525 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
527 2007-01-28 Manuel Lauss <slauss@resi.at>
529 * configure.ac (sh64-*-*): Change to sh64*-*-*.
530 (sh-*-*): Change to sh*-*-*.
531 * configure: Regenerated.
533 2007-01-09 Daniel Jacobowitz <dan@codesourcery.com>
535 Updated copyright notices for most files.
537 2006-12-20 Hans-Peter Nilsson <hp@axis.com>
539 * Makefile.in (autoconf-common autoheader-common): Only run
540 autoheader on subdirs with a file config.in.
542 * configure.ac (common): Make the default "yes" for all targets
544 * configure: Regenerate.
546 * Makefile.in (autoconf-common autoheader-common): In documented
547 usage, say SHELL=/bin/sh.
548 (.PHONY): Add autoheader-common.
550 * MAINTAINERS: Add self as authorized committer for *.
552 2006-10-02 Edgar E. Iglesias <edgar@axis.com>
553 Hans-Peter Nilsson <hp@axis.com>
555 * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
556 (cris_unknown_syscall_action): Declare.
557 * cris/sim-if.c (cris_unknown_syscall_action): Define.
558 (cris_options): Add cris-unknown-syscall option.
559 (cris_option_handler): Correct comment about and error message for
560 invalid --cris-cycles argument. Handle --cris-unknown-syscall.
561 * cris/traps.c: Include stdarg.h
562 (cris_unknown_syscall): New function.
563 (cris_break_13_handler): Instead of sim_io_eprintf and
564 sim_engine_halt, call cris_unknown_syscall to handle more or less
565 unknown syscalls. Adjust code as necessary to handle return
568 2006-09-30 Daniel Jacobowitz <dan@codesourcery.com>
570 * MAINTAINERS: Add Dave Brolley for sh64.
572 2006-09-30 Hans-Peter Nilsson <hp@axis.com>
574 * cris/traps.c (TARGET_PIPE_BUF): New macro.
575 (cris_pipe_empty): Correct initialization of "remaining". Only
576 adjust the "write" return value if more than TARGET_PIPE_BUF bytes
579 2006-09-29 Hans-Peter Nilsson <hp@axis.com>
581 * cris/configure.ac: Check for limits.h and sys/param.h.
582 * cris/configure, cris/config.in: Rebuild.
583 * cris/traps.c (SIM_PATHMAX): New macro.
584 (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
586 2006-08-08 Joel Sherrill <joel.sherrill@oarcorp.com>
588 * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
589 * Makefile.in (FLAGS_TO_PASS): Include libdir.
590 * configure: Regenerated.
592 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
594 * cris/configure: Regenerated.
596 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
598 * cris/configure: Regenerated.
600 2006-05-05 Andreas Schwab <schwab@suse.de>
602 * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
603 * configure: Regenerate.
605 * Makefile.in (CFLAGS_FOR_BUILD): Define.
606 (CC_FOR_BUILD): Don't override.
607 (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
609 2006-05-04 Daniel Jacobowitz <dan@codesourcery.com>
611 * MAINTAINERS: Add an "Authorized committers" section, and list
614 2006-04-08 Hans-Peter Nilsson <hp@axis.com>
616 * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
618 2006-04-03 Hans-Peter Nilsson <hp@axis.com>
620 * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
621 * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
622 (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
623 (all): Depend on rvdummy$(EXEEXT).
624 * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS. Check for
625 sys/socket.h and sys/select.h. Call SIM_AC_OPTION_HARDWARE,
627 * cris/configure: Regenerate.
628 * cris/cris-sim.h (cris_have_900000xxif): Declare here.
629 (enum cris_interrupt_type, crisv10deliver_interrupt)
630 (crisv32deliver_interrupt: New declarations.
631 * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
632 sim_events_tickn and set state-events member work_pending when it's
633 time for the next event.
634 [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
635 interrupt-delivery function.
636 * cris/crisv10f.c (MY (deliver_interrupt)): New function.
637 * cris/crisv32f.c (MY (deliver_interrupt)): New function.
638 * cris/devices.c: Include hw-device.h.
639 (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
640 (device_io_write_buffer): Only perform 0x900000xx-functions if
641 cris_have_900000xxif is nonzero. Else if WITH_HW defined,
642 call hw_io_write_buffer. Add return 0 last in function.
643 * cris/sim-if.c (cris_have_900000xxif): Now global.
644 (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
645 Force "-model" option, effectively.
646 * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
647 (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
649 2006-04-02 Hans-Peter Nilsson <hp@axis.com>
651 * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
652 (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
653 (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
655 2006-03-13 DJ Delorie <dj@redhat.com>
657 * MAINTAINERS: Add self as m32c sim maintainer.
659 2006-02-23 Hans-Peter Nilsson <hp@axis.com>
661 * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
663 (cris_break_13_handler) <case TARGET_SYS_time>: New case.
665 2006-01-23 Jim Blandy <jimb@redhat.com>
667 Add simulator for Renesas M32C and M16C.
669 * m32c: New directory.
670 * configure.ac: Add entry for Renesas M32C.
671 * configure: Regenerate.
673 2006-01-10 Hans-Peter Nilsson <hp@axis.com>
675 * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
676 cycle count for the current insn.
678 2005-12-06 Hans-Peter Nilsson <hp@axis.com>
680 * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
681 cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
682 cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
683 cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
685 2005-12-05 Hans-Peter Nilsson <hp@axis.com>
687 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
688 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
689 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
690 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
691 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
692 cris/semcrisv32f-switch.c: Regenerate.
694 2005-11-20 Hans-Peter Nilsson <hp@axis.com>
696 * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
697 (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
699 (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
700 F_GETFL on fd 0, 1 and 2.
702 2005-11-17 Hans-Peter Nilsson <hp@axis.com>
704 * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
705 last_open_fd, last_open_flags.
706 * cris/traps.c: Don't include targ-vals.h.
707 (TARGET_O_ACCMODE): Define.
708 (cris_break_13_handler): Set new _sim_cpu members.
709 <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
710 Rearrange code as switch. Emit "unimplemented" abort for
711 unimplemented fcntl calls.
713 * cris/traps.c (TARGET_SYS_stat): Define.
714 (syscall_stat32_map): Add entry for TARGET_SYS_stat.
715 (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
717 2005-11-16 Hans-Peter Nilsson <hp@axis.com>
719 * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
720 low 32 bits are used after an unsigned long cast.
722 2005-05-28 Hans-Peter Nilsson <hp@axis.com>
724 * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
726 2005-05-26 Chris Demetriou <cgd@netbsd.org>
728 * MAINTAINERS: Update my mail address, move myself to the
729 "Past maintainers" section.
731 2005-05-17 Corinna Vinschen <vinschen@redhat.com>
733 * configure.ac: Add igen to v850 build.
734 * configure: Regenerate.
736 2005-04-29 Paul Brook <paul@codesourcery.com>
738 * common/callback.c (PIPE_BUF): Provide default definition.
739 (os_lstat): Use stat if lstat is not available on the host.
740 (os_ftruncate): Return EINVAL if not available on the host.
741 (os_truncate): Ditto.
742 * common/configure.ac: Check for lstat, truncate and ftruncate.
743 * common/configure: Regenerate.
744 * common/config.in: Regenerate.
746 2005-04-27 Paul Brook <paul@codesourcery.com>
748 * common/Make-common.in: Add $(EXEEXT) to "run".
750 2005-04-18 Hans-Peter Nilsson <hp@axis.com>
752 * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
753 For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
754 implemented. In call to create_map, pad length argument to 8k.
756 2005-04-15 Corinna Vinschen <vinschen@redhat.com>
758 * configure.ac: Add explicit sh64 case.
759 * configure: Regenerate.
761 2005-03-30 Paul Brook <paul@codesourcery.com>
763 * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
765 2005-03-24 Hans-Peter Nilsson <hp@axis.com>
767 * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
768 include cgen-ops.h in decodev10.c and decodev32.c.
769 * cris/sim-main.h: Don't include cgen-ops.h here.
770 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
771 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
772 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
773 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
774 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
775 cris/semcrisv32f-switch.c: Regenerate.
777 * cris/traps.c (cris_break_13_handler) <case
778 TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
779 sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
781 2005-03-23 Mark Kettenis <kettenis@gnu.org>
783 * cris/configure: Regenerate.
785 2005-02-28 Jim Blandy <jimb@redhat.com>
787 * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
788 mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
789 Regenerated, after change to common/aclocal.m4.
791 2005-02-18 Corinna Vinschen <vinschen@redhat.com>
793 * iq2000: New target subdirectory.
794 * configure.ac: Add iq2000 target.
795 * configure: Regenerate.
797 2005-01-29 Hans-Peter Nilsson <hp@axis.com>
799 * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
800 (realclean, install): Fail if subdir make failed.
802 2005-01-28 Hans-Peter Nilsson <hp@axis.com>
804 * cris: New directory, simulator for Axis Communications CRIS
805 including CRIS v32, CGEN-based.
806 * configure.ac: Add corresponding configury.
807 * configure: Regenerate.
809 2005-01-17 Andrew Cagney <cagney@gnu.org>
811 * configure.ac: For mips*-*-* and mn10300*-*-* configure the
812 common directory. Remove sparc*-*-* from list.
814 2005-01-11 Andrew Cagney <cagney@gnu.org>
816 * Makefile.in (autoconf-common autoheader-common): Add --force to
817 autoconf and autoheader.
818 (autoconf-common autoheader-common)
819 (autoconf-install autoheader-install): Check for configure.ac, not
821 * configure.ac: Delete AC_CONFIG_AUX_DIR.
822 * configure: Re-generate.
824 2005-01-07 Andrew Cagney <cagney@gnu.org>
826 * configure.ac: Replace configure.in. Requires autoconf 2.59 and
827 correctly calls AC_CONFIG_SUBDIRS.
828 * configure: Re-generate.
830 2004-12-01 Andrew Cagney <cagney@gnu.org>
832 * i960, h8500: Delete directory.
834 2004-11-12 Andrew Cagney <cagney@gnu.org>
836 * d30v, fr30, mn10200, z8k: Delete directory.
838 2004-03-10 Ben Elliston <bje@gnu.org>
840 * MAINTAINERS: Update my mail address.
842 2004-01-26 Chris Demetriou <cgd@broadcom.com>
844 * configure.in (mips*-*-*): Configure in testsuite.
845 * configure: Regenerate.
847 2003-10-08 Dave Brolley <brolley@redhat.com>
849 * configure.in: Move frv handling to alphabetically correct placement.
851 2003-09-03 Andreas Schwab <schwab@suse.de>
853 * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
855 2003-08-29 Dave Brolley <brolley@redhat.com>
857 * MAINTAINERS: Add myself as maintainer of the FRV port.
859 2003-08-20 Michael Snyder <msnyder@redhat.com>
860 Dave Brolley <brolley@redhat.com>
862 * frv/: New directory, simulator for the Fujitsu FRV.
863 * configure.in: Add frv configury.
864 * configure: Regenerate.
866 2003-08-10 Ben Elliston <bje@wasabisystems.com>
868 * MAINTAINERS: Update my mail address.
870 2003-08-09 Andrew Cagney <cagney@redhat.com>
872 * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
873 maintenance. List igen and sh maintainers. Mention that target
874 and global maintainers pick up the slack.
876 2003-07-09 Michael Snyder <msnyder@redhat.com>
878 * configure.in: Add testsuite to extra_subdirs for sh.
879 * configure: Regenerate.
881 2003-01-23 Nick Clifton <nickc@redhat.com>
885 2002-04-02 Alexandre Oliva <aoliva@redhat.com>
887 * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
889 2002-08-24 Geoffrey Keating <geoffk@redhat.com>
891 * MAINTAINERS: Update my email address.
893 2002-07-17 Andrew Cagney <ac131313@redhat.com>
895 * w65/: Delete directory.
897 2002-07-16 Andrew Cagney <ac131313@redhat.com>
899 * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
900 * configure: Re-generate.
902 2002-07-13 Andrew Cagney <ac131313@redhat.com>
904 * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
905 * configure: Re-generate.
907 2002-06-16 Andrew Cagney <ac131313@redhat.com>
909 * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
910 id, date and host to be overriden by NAME, ID, DATE and HOST
911 respectfully. Use ISO dates.
913 Thu Jun 6 12:34:13 2002 Andrew Cagney <cagney@redhat.com>
915 * Makefile.in (ChangeLog): New makefile variable.
916 * README-HACKING: Mention the ChangeLog makefile variable.
918 2002-06-01 Andrew Cagney <ac131313@redhat.com>
920 * tic80/: Delete directory.
922 2002-05-16 Stephane Carrez <stcarrez@nerim.fr>
924 * MAINTAINERS: Update my email address.
926 2002-03-06 Stephane Carrez <Stephane.Carrez@worldnet.fr>
928 * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
930 2002-03-01 Frank Ch. Eigler <fche@redhat.com>
932 * MAINTAINERS: Record self as a co-maintainer of just common/.
934 2002-02-07 Nick Clifton <nickc@cambridge.redhat.com>
936 * MAINTAINERS: Point to GDB files describing overall maintaince
937 and check-in procedures.
939 2002-01-10 Nick Clifton <nickc@cambridge.redhat.com>
941 * MAINTAINERS: Add myself for ARM portions.
943 2001-10-19 Andrew Cagney <ac131313@redhat.com>
945 * configure.in: When Linux or NetBSD, enable PowerPC simulator.
946 * configure: Re-generate.
948 2001-02-16 Ben Elliston <bje@redhat.com>
950 * MAINTAINERS: Add myself for common portions.
952 2001-01-15 Chris Demetriou <cgd@broadcom.com>
954 * MAINTAINERS: Added self and Andrew for the mips sim.
956 2000-10-25 Geoff Keating <geoffk@cygnus.com>
958 * MAINTAINERS: Added self and Andrew for the ppc sim.
960 Thu Jul 27 21:26:26 2000 Andrew Cagney <cagney@b1.cygnus.com>
962 From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
963 * m68hc11: New directory.
965 * configure: Regenerate.
967 Tue Jul 4 13:43:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
969 * tic80: New directory.
970 * configure.in: Add configury.
971 * configure: Regenerate.
973 2000-04-20 Nick Clifton <nickc@cygnus.com>
975 * configure.in (extra_subdirs): Add testsuite to strongarm
977 * configure: Regenerate.
979 Sat Mar 4 16:48:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
981 * MAINTAINERS: New file. Blank.
983 1999-11-18 Ben Elliston <bje@cygnus.com>
985 * configure.in: Require autoconf 2.13 and remove obsolete
986 invocation of AC_C_CROSS.
987 * configure: Regenerate.
989 1999-09-29 Doug Evans <devans@casey.cygnus.com>
991 * configure.in: Configure the testsuite directory for thumb.
992 * configure: Regenerate.
994 1999-07-16 Ben Elliston <bje@cygnus.com>
996 * configure.in: Configure the testsuite directory for arm.
997 * configure: Regenerate.
999 1999-04-08 Nick Clifton <nickc@cygnus.com>
1001 * configure.in: Add support for MCore target.
1002 * configure: Regenerate.
1004 1999-03-14 Stan Shebs <shebs@andros.cygnus.com>
1006 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
1007 RUNTEST instead of commenting out, fixes portability problem.
1009 1999-02-08 Nick Clifton <nickc@cygnus.com>
1011 * configure.in: Add support for StrongARM target.
1012 * configure: Regenerate.
1014 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
1016 * configure.in: Require autoconf 2.12.1 or higher.
1018 1998-12-08 James E Wilson <wilson@wilson-pc.cygnus.com>
1020 * configure.in (i960-*-*): Add.
1021 * configure: Rebuild.
1023 Wed Nov 4 19:11:43 1998 Dave Brolley <brolley@cygnus.com>
1025 * configure.in: Added case for fr30-*-*.
1026 * configure: Regenerated.
1028 Fri Sep 25 10:12:19 1998 Christopher Faylor <cgf@cygnus.com>
1030 * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
1031 to allow successful operation on Windows.
1033 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
1035 * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
1036 check can be invoked recursively.
1038 Wed Apr 29 12:38:53 1998 Mark Alexander <marka@cygnus.com>
1040 * configure.in: Build simulator on sparclite and sparc86x targets.
1041 * configure: Regenerate.
1043 Sun Apr 26 15:21:01 1998 Tom Tromey <tromey@cygnus.com>
1045 * Makefile.in (autoconf-common autoheader-common): Don't pass -l
1046 to autoconf and autoheader.
1048 Fri Apr 24 11:14:13 1998 Tom Tromey <tromey@cygnus.com>
1050 * Makefile.in (autoconf-common autoheader-common): Pass `-l
1051 ../common' to autoconf and autoheader. Unconditionally run
1052 autoconf in every subdir.
1053 (autoconf-changelog autoheader-changelog): Unconditionally run
1054 commands in every subdir.
1055 (autoconf-install autoheader-install): Likewise.
1057 Tue Mar 24 17:12:43 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk>
1059 * Makefile.in: Get SHELL from configure.
1060 * (FLAGS_TO_PASS): Pass down SHELL.
1061 * configure: Regenerate with autoconf 2.12.1 to fix shell issues for
1064 Tue Mar 24 11::18:00 1998 Joyce Janczyn <janczyn@cygnus.com>
1066 * configure.in (extra_subdirs): Enable igen for mn10300.
1067 * configure: Re-generate.
1069 Tue Dec 2 10:10:42 1997 Nick Clifton <nickc@cygnus.com>
1071 * configure.in (extra_subdirs): Add support for thumb target.
1073 * configure (extra_subdirs): Add support for thumb target.
1075 Wed Oct 8 12:38:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
1077 * configure.in (extra_subdirs): Add IGEN directory when MIPS
1079 * configure: Regenerate.
1081 Fri Sep 12 13:10:31 1997 Andrew Cagney <cagney@b1.cygnus.com>
1083 * configure.in (extra_subdirs): v850ea needs igen.
1084 * configure: Re-generate.
1086 Mon Sep 1 16:48:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
1088 * configure.in (testdir): When a testsuite directory, add that to
1089 the list of confdirs.
1091 Tue Aug 19 11:17:46 1997 Andrew Cagney <cagney@b1.cygnus.com>
1093 * configure.in (extra_subdirs): Enable igen ready for V850.
1095 Tue Aug 26 15:14:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
1097 * configure.in (w65-*-*, only_if_enabled): Set.
1098 * configure: Re-generate.
1100 Mon Aug 25 16:26:53 1997 Andrew Cagney <cagney@b1.cygnus.com>
1102 * configure.in (sparc*-*-*, only_if_enabled): Set
1103 only_if_enabled=yes. Check only_if_enabled before enabling a
1105 * configure: Regenerate.
1107 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
1109 * configure.in (extra_subdirs): Add v850e target.
1111 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
1113 * configure.in (extra_subdirs): Add v850ea target.
1115 Fri Jul 25 11:40:47 1997 Doug Evans <dje@canuck.cygnus.com>
1117 * configure.in (sparc*-*-*): Don't build erc32.
1118 * configure: Regenerate.
1120 Thu Apr 24 00:47:20 1997 Doug Evans <dje@canuck.cygnus.com>
1122 * configure.in (m32r-*-*): New target.
1123 * configure: Regenerate.
1125 * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
1127 Mon Apr 21 22:57:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
1129 * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
1130 thought that .NOEXPORT was the default target.
1132 Fri Apr 11 17:18:07 1997 Ian Lance Taylor <ian@cygnus.com>
1134 * Makefile.in (clean mostlyclean): Restore targets accidentally
1135 deleted in earlier change.
1137 Thu Apr 3 12:20:32 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1139 * Makefile.in (autoheader-common, autoheader-changelog,
1140 autoheader-install): Perform autoheader in addition to autoconf.
1142 Wed Apr 2 15:09:05 1997 Doug Evans <dje@canuck.cygnus.com>
1144 * Makefile.in (autoconf-install): New target.
1145 (autoconf-changelog): Try different way to obtain user name.
1147 Wed Apr 2 14:25:52 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1149 * Makefile.in (autoconf-changelog): New target, update
1150 ChangeLog for all subdirectories - normally used after
1151 autoconf-common target.
1153 Wed Mar 19 14:26:21 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1155 * configure.in (extra_subdirs): Include testsuite for d30v.
1156 * configure: Regenerate.
1158 * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1160 (check): New rules - drive the testsuite.
1162 Mon Mar 3 13:01:00 1997 Jeffrey A Law (law@cygnus.com)
1164 * configure.in: Add mn10200 configure lines accidentally
1166 * configure: Regenerated.
1168 Wed Feb 19 10:34:20 1997 Andrew Cagney <cagney@critters.cygnus.com>
1170 * configure.in (extra_subdirs): Generalize common sub directory
1172 (extra_subdirs): For d30v add igen to the list to be built.
1174 Sun Feb 16 16:37:47 1997 Andrew Cagney <cagney@critters.cygnus.com>
1176 * configure.in (d30v): New target.
1177 * configure: Regenerated.
1179 Wed Feb 19 23:17:13 1997 Jeffrey A Law (law@cygnus.com)
1181 * configure.in: Don't require GCC to build the mn10200
1183 * configure: Rebuilt.
1185 Wed Feb 5 13:28:13 1997 Doug Evans <dje@canuck.cygnus.com>
1187 * configure.in: Don't configure any subdirs if no simulator
1188 is being built. Don't use erc32 for sparc64.
1189 * configure: Regenerated.
1191 Tue Feb 4 13:19:39 1997 Doug Evans <dje@canuck.cygnus.com>
1193 * Makefile.in (autoconf-common): New target.
1194 * configure.in: Do configure common.
1195 * configure: Regenerated.
1197 Thu Jan 23 13:59:52 1997 Stu Grossman (grossman@critters.cygnus.com)
1199 * configure configure.in: Don't configure common anymore. Files
1200 from common are now built in the individual simualtor directories.
1201 This fixes problems with the WinGDB build procedure.
1203 Mon Jan 13 13:16:42 1997 Jeffrey A Law (law@cygnus.com)
1205 * configure: Enable the mn10200 simulator.
1207 Wed Nov 20 01:00:36 1996 Doug Evans <dje@canuck.cygnus.com>
1209 * configure.in (configdirs): Add common.
1210 * configure: Regenerated.
1212 Fri Nov 1 08:03:30 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1214 * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1215 system V based targets.
1216 * configure: Regenerate.
1218 Thu Oct 17 12:50:08 1996 Doug Evans <dje@canuck.cygnus.com>
1220 * configure.in (--enable-sim-powerpc): Delete.
1221 (--enable-sim): Add.
1222 * configure: Regenerated.
1224 Fri Oct 11 21:13:43 1996 Jeffrey A Law (law@cygnus.com)
1226 * configure.in: Only build the V850 simulator if
1228 * configure: Rebuild.
1230 Sun Sep 8 17:22:50 1996 Ian Lance Taylor <ian@cygnus.com>
1232 * configure.in: Do build erc32 for DOS and Windows hosts.
1233 * configure: Rebuild.
1235 Wed Sep 4 18:11:27 1996 Stu Grossman (grossman@critters.cygnus.com)
1237 * Makefile.in erc32/Makefile.in: Don't set srcroot. This should
1238 be inherited from the parent. Remove INSTALL_XFORM and
1239 INSTALL_XFORM1. Make INSTALL be set from configure.
1241 Wed Sep 4 15:49:16 1996 Ian Lance Taylor <ian@cygnus.com>
1243 * configure.in: Only build the MIPS simulator if we are using
1245 * configure: Rebuild.
1247 Wed Aug 28 19:05:23 1996 Jeffrey A Law (law@cygnus.com)
1249 * configure.in (v850-*-*): Added V850 simulator.
1251 Thu Aug 1 17:08:41 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1253 * configure.in (d10v-*-*): Added D10V simulator.
1255 Wed Jun 26 12:33:57 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1257 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1258 INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1260 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1261 (AC_PROG_INSTALL): Added.
1262 * configure: Rebuilt.
1264 Mon Jun 24 14:18:26 1996 Ian Lance Taylor <ian@cygnus.com>
1266 * configure.in: Only configure erc32 if using gcc.
1267 * configure: Rebuild.
1269 Tue Jun 4 09:24:21 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1271 * configure.in (sim_target): Build PowerPC simulator for powerpc
1272 System V.4, Solaris, and Elf targets.
1273 * configure: Regenerate with autoconf 2.10.
1275 Wed May 22 12:10:49 1996 Rob Savoye <rob@chinadoll>
1277 * configure.in: Only built erc32 simulator on Unix hosts as it
1279 * configure: Regenerated with autoconf 2.8.
1281 Sun May 19 20:20:40 1996 Rob Savoye <rob@chinadoll.cygnus.com>
1283 * erc32: Sparc simulator from the ESA.
1285 Sun Apr 7 21:00:09 1996 Fred Fish <fnf@cygnus.com>
1287 From: Miles Bader <miles@gnu.ai.mit.edu>
1288 * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1289 * configure: Regenerate using autoconf.
1291 Thu Feb 22 11:31:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1293 * Makefile.in (install): Fix typo.
1295 Wed Feb 21 11:59:57 1996 Ian Lance Taylor <ian@cygnus.com>
1297 * configure: Regenerate with autoconf 2.7.
1299 * Makefile.in (all): Simplify.
1300 (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1301 as in the all target.
1302 (distclean, maintainer-clean, realclean): Likewise.
1303 (install): Likewise.
1305 Thu Feb 15 18:37:00 1996 Fred Fish <fnf@cygnus.com>
1307 * Makefile.in (all): Remove extra '\' char from shell script.
1309 Wed Feb 14 16:43:59 1996 Mike Meissner <meissner@tiktok.cygnus.com>
1311 * Makefile.in (all): Avoid a for loop with zero elements, even if
1312 the loop will not be executed because of an if statement.
1314 Wed Jan 31 21:48:34 1996 Fred Fish <fnf@cygnus.com>
1316 * Makefile.in (install): Add missing semicolon in "fi \".
1318 Thu Nov 9 16:10:56 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1320 * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1321 defaults from configure.
1323 * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1325 (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1326 if either --enable-sim-powerpc is used, or the host compiler is
1329 Wed Nov 8 15:46:49 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
1331 * configure.in (mips*-*-*): Added "mips" simulator target.
1332 * configure: Re-generated.
1334 Tue Oct 10 11:08:20 1995 Fred Fish <fnf@cygnus.com>
1336 * Makefile.in (BISON): Remove macro.
1337 (FLAGS_TO_PASS): Remove BISON.
1339 Sun Oct 8 04:26:27 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1341 * configure.in: Explicitly `exit 0' for broken shells.
1342 * configure: Rebuilt.
1344 Fri Oct 6 12:03:27 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1346 * common/run.c (main): Initialize the callbacks.
1348 Wed Sep 20 13:34:50 1995 Ian Lance Taylor <ian@cygnus.com>
1350 * Makefile.in (maintainer-clean): New synonym for realclean.
1352 Fri Aug 25 11:53:43 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1354 * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1355 the target is powerpc*-*-eabisim*, since it requires GCC to build.
1357 Mon Aug 21 17:53:48 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1359 * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1360 <cagney@highland.com.au>.
1361 * configure: Regnerate from configure.in.
1363 Thu Aug 3 10:45:37 1995 Fred Fish <fnf@cygnus.com>
1365 * Update all FSF addresses except those in COPYING* files.
1367 Thu Jul 20 15:17:29 1995 Fred Fish <fnf@cygnus.com>
1369 * Makefile.in (CC_FOR_BUILD): Define default and arrange to pass
1370 submakes either default or passed in value.
1372 Wed Jul 5 14:32:54 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1374 * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1375 install): Changed targets so that they descend all
1376 subdirectories in $(SUBDIRS).
1377 (*-all, *-clean, *-install): Removed targets.
1379 * configure.in: Don't bother with target makefile fragments, they
1380 are no longer needed.
1381 * configure: regenerated.
1383 * Makefile.in, configure.in: converted to autoconf.
1384 * configure: New file, generated with autconf 2.4.
1386 Wed May 24 14:48:46 1995 Steve Chamberlain <sac@slash.cygnus.com>
1388 * Makefile.in: Support ARM.
1389 * configure.in: Ditto.
1391 Sun Jan 15 16:53:47 1995 Steve Chamberlain <sac@splat>
1393 * Makefile.in: Support W65.
1394 * configure.in: Ditto.
1396 Sun Mar 13 09:27:50 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1398 * Makefile.in: Add TAGS target.
1400 Mon Sep 13 12:47:15 1993 K. Richard Pixley (rich@sendai.cygnus.com)
1402 * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1403 install-h8300, clean-h8300, all-h8500, install-h8500,
1404 clean-h8500, all-sh, install-sh, clean-sh): do not echo
1407 Wed Jun 30 14:12:05 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
1409 * Makefile.in: remove endian.h trace from h8500
1411 Sun Jun 13 13:08:58 1993 Jim Kingdon (kingdon@cygnus.com)
1413 * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1415 Fri May 21 11:21:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1417 * Makefile.in: make all of the all-* target (except all-nothing)
1418 depend on endian.h, so that if we're not building a simulator, we
1421 Fri May 21 10:55:06 1993 Ian Lance Taylor (ian@cygnus.com)
1423 * Makefile.in (check, installcheck): Added dummy targets.
1425 Mon May 3 21:39:43 1993 Fred Fish (fnf@cygnus.com)
1427 * Makefile.in (endian): Find endian.c in $(srcdir), and also
1428 explicitly make it, since some makes apparently don't work with
1429 VPATH and .c to executable rules (SunOS make for example).
1431 Mon May 3 08:29:01 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1433 * Makefile.in (endian): Add explicit rule for broken makes.
1435 Mon Mar 15 15:47:53 1993 Ian Lance Taylor (ian@cygnus.com)
1437 * Makefile.in (info, install-info): New targets.
1438 (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1441 Wed Feb 10 20:12:27 1993 K. Richard Pixley (rich@ok.cygnus.com)
1443 * Makefile.in (endian.h): build endian.h via a temporary file so
1444 that we don't leave an incomplete file lying around on
1446 (clean): remove endian, e.h, and endian.h.
1448 Mon Feb 8 11:46:06 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1450 * Makefile.in, configure.in: if target isn't supported, build a