1 2012-12-19 Joel Brobecker <brobecker@adacore.com>
3 Update the non-FSF-copyrighted files in sim to GPLv3 or later.
5 2012-11-20 Pavel Chupin <pavel.v.chupin@intel.com>
7 * common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS
9 * common/acinclude.m4: Define lt_cv_dlopen_libs.
10 * arm/configure: Regenerate.
11 * avr/configure: Regenerate.
12 * bfin/configure: Regenerate.
13 * common/configure: Regenerate.
14 * cr16/configure: Regenerate.
15 * cris/configure: Regenerate.
16 * d10v/configure: Regenerate.
17 * erc32/configure: Regenerate.
18 * frv/configure: Regenerate.
19 * h8300/configure: Regenerate.
20 * igen/configure: Regenerate.
21 * iq2000/configure: Regenerate.
22 * lm32/configure: Regenerate.
23 * m32c/configure: Regenerate.
24 * m32r/configure: Regenerate.
25 * m68hc11/configure: Regenerate.
26 * mcore/configure: Regenerate.
27 * microblaze/configure: Regenerate.
28 * mips/configure: Regenerate.
29 * mn10300/configure: Regenerate.
30 * moxie/configure: Regenerate.
31 * ppc/configure: Regenerate.
32 * rl78/configure: Regenerate.
33 * rx/configure: Regenerate.
34 * sh/configure: Regenerate.
35 * sh64/configure: Regenerate.
36 * testsuite/configure: Regenerate.
37 * v850/configure: Regenerate.
39 2012-11-05 Stephane Carrez <Stephane.Carrez@gmail.com>
41 * MAINTAINERS: Update my email address.
43 2012-09-24 Steve Ellcey <sellcey@mips.com>
45 * mips/basic.exp: Add mips*-mti-elf* target.
46 * configure.ac: Add mips*-mti-elf* target.
47 * configure: Regenerate.
49 2012-06-15 Joel Brobecker <brobecker@adacore.com>
51 * configure: Regenerate.
53 2012-06-06 Michael Eager <eager@eagercon.com>
55 * microblaze/interp.c (config.h): Add #include.
57 2011-11-29 Joel Brobecker <brobecker@adacore.com>
59 * MAINTAINERS (Global Maintainers): New section. Add Mike
62 2011-11-28 DJ Delorie <dj@redhat.com>
64 * configure.tgt: Add rl78 support.
65 * configure: Regenerate.
66 * rl78: New directory.
67 * MAINTAINERS: Add myself as RL78 maintainer.
69 2011-07-08 Hans-Peter Nilsson <hp@axis.com>
71 * MAINTAINERS: Remove Thiemo Seufer.
73 2011-06-04 Mike Frysinger <vapier@gentoo.org>
75 * configure.tgt (bfin-*-*): Add sim_testsuite=yes.
76 * configure: Regenerate.
78 2011-05-04 Joseph Myers <joseph@codesourcery.com>
80 * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
82 * configure: Regenerate.
84 2011-03-05 Mike Frysinger <vapier@gentoo.org>
86 * MAINTAINERS: Add bfin entry.
87 * configure.tgt (bfin-*-*): Handle bfin targets.
88 * configure: Regenerate.
90 2011-01-05 Mike Frysinger <vapier@gentoo.org>
92 * .gitignore: Add /*/hw-config.h.
94 2010-12-23 Mike Frysinger <vapier@gentoo.org>
96 * .gitignore: New file.
98 2010-07-28 DJ Delorie <dj@redhat.com>
100 * MAINTAINERS: Add self as RX maintainer. Sort list.
102 2010-06-08 Nick Clifton <nickc@redhat.com>
104 * reg.c (set_oszc): Use unsigned int for the mask.
105 (set_szc, set_osz, set_sz): Likewise.
107 2010-04-26 Mike Frysinger <vapier@gentoo.org>
109 * configure.ac: Target logic moved out to and included from ...
110 * configure.tgt: ... this new file.
111 * configure: Regenerated.
113 2010-04-12 Mike Frysinger <vapier@gentoo.org>
115 * README-HACKING: Add more sections.
117 2010-02-11 Doug Evans <dje@sebabeach.org>
119 * cris/cpuv10.h, * cris/cpuv32.h, * cris/cris-desc.c,
120 * cris/cris-desc.h, * cris/decodev10.c, * cris/decodev32.c,
121 * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
122 * cris/semcrisv32f-switch.c: Regenerate.
124 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
126 * avr/configure: Regenerate.
127 * cris/configure: Regenerate.
128 * microblaze/configure: Regenerate.
130 2010-01-02 Doug Evans <dje@sebabeach.org>
132 * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c,
133 * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c,
134 * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c,
135 * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h,
136 * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
137 * cris/semcrisv32f-switch.c: Regenerate, update copyright year.
139 2010-01-01 Doug Evans <dje@sebabeach.org>
141 * cris/mloop.in: Fix copyright year update snafu.
143 2009-11-24 Joel Brobecker <brobecker@adacore.com>
145 * common/aclocal.m4: Add include of ../../config/zlib.m4.
146 * common/common.m4: Use AM_ZLIB to check for zlib support.
147 * ppc/configure.ac: Likewise.
148 * arm/configure, avr/configure, common/configure, cr16/configure,
149 cris/configure, d10v/configure, erc32/configure, frv/configure,
150 h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
151 m32r/configure, m68hc11/configure, mcore/configure,
152 microblaze/configure, mips/configure, mn10300/configure,
153 moxie/configure, ppc/configure, sh/configure, sh64/configure,
154 v850/configure: Regenerate.
156 2009-11-24 DJ Delorie <dj@redhat.com>
159 * configure.ac: Add entry for Renesas RX.
160 * configure: Regenerate.
162 2009-11-22 Doug Evans <dje@sebabeach.org>
164 * cris/cpuall.h: Regenerate.
165 * cris/cpuv10.h: Regenerate.
166 * cris/cpuv32.h: Regenerate.
167 * cris/decodev10.c: Regenerate.
168 * cris/decodev10.h: Regenerate.
169 * cris/decodev32.c: Regenerate.
170 * cris/decodev32.h: Regenerate.
172 2009-11-12 Tristan Gingold <gingold@adacore.com>
174 * avr/interp.c (sim_write): Allow byte access.
177 2009-11-12 Tristan Gingold <gingold@adacore.com>
179 * avr/interp.c (sim_load): Clear memory before loading.
181 2009-11-09 Tristan Gingold <gingold@adacore.com>
183 * avr/interp.c (sim_resume): Fix typo for OP_ret.
185 2009-10-23 Doug Evans <dje@sebabeach.org>
187 * cris/arch.c: Regenerate.
188 * cris/arch.h: Regenerate.
189 * cris/cpuall.h: Regenerate.
190 * cris/cpuv10.c: Regenerate.
191 * cris/cpuv10.h: Regenerate.
192 * cris/cpuv32.c: Regenerate.
193 * cris/cpuv32.h: Regenerate.
194 * cris/cris-desc.c: Regenerate.
195 * cris/cris-desc.h: Regenerate.
196 * cris/cris-opc.h: Regenerate.
197 * cris/decodev10.c: Regenerate.
198 * cris/decodev10.h: Regenerate.
199 * cris/decodev32.c: Regenerate.
200 * cris/decodev32.h: Regenerate.
201 * cris/modelv10.c: Regenerate.
202 * cris/modelv32.c: Regenerate.
203 * cris/semcrisv10f-switch.c: Regenerate.
204 * cris/semcrisv32f-switch.c: Regenerate.
206 2009-10-22 Tristan Gingold <gingold@adacore.com>
208 * avr/interp.c (sim_stop): Return 1.
210 2009-10-16 Doug Evans <dje@sebabeach.org>
212 * MAINTAINERS: Add myself as m32r maintainer.
214 2009-10-15 Michael Egaer <eager@eagercon.com>
216 * MAINTAINERS: Add self as MicroBlaze maintainer.
218 2009-10-14 Ben Elliston <bje@gnu.org>
220 * MAINTAINERS (common): Move myself to "past maintainers" section.
222 2009-10-06 Michael Eager <eager@eagercon.com>
224 * microblaze/interp.c: Add include microblaze-dis.h.
226 2009-09-23 Michael Eager <eager@eagercon.com>
228 * configure: Add microblaze-*.* (not regenerated).
229 * configure.ac: Likewise.
230 * microblaze/config.in: New.
231 * microblaze/configure: Generate.
232 * microblaze/configure.ac: New.
233 * microblaze/interp.c: New.
234 * microblaze/Makefile.in: New.
235 * microblaze/microblaze.h: New.
236 * microblaze/microblaze.isa: New.
237 * microblaze/sim-main.h: New.
238 * microblaze/sysdep.h: New.
240 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
242 * avr/config.in: Regenerate.
243 * avr/configure: Likewise.
244 * configure: Likewise.
245 * cris/config.in: Likewise.
246 * cris/configure: Likewise.
248 * configure.ac: m4_include toplevel config/override.m4.
249 * configure: Regenerate.
250 * avr/configure: Regenerate.
251 * cris/configure: Regenerate.
253 2009-07-30 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
255 * Makefile.in (datarootdir): New variable.
257 2009-05-18 Jon Beniston <jon@beniston.com>
259 * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
260 * configure.ac: Add lm32 target.
261 * lm32: New directory.
263 2009-05-11 Andrew Cagney <cagney@gnu.org>
265 * MAINTAINERS: Orphan ppc.
267 2009-05-08 Kevin Buettner <kevinb@redhat.com>
269 * m32c/gdb-if.c (m32c_signal_to_host): Rename to
270 m32c_signal_to_target. Change signal return values from SIGILL,
271 SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
272 TARGET_SIGNAL_SEGV, etc. Fix all callers.
274 2009-04-30 Anthony Green <green@moxielogic.com>
276 * MAINTAINERS: Add myself for the moxie port.
277 * moxie: New directory.
278 * configure.ac: Add entry for moxie.
279 * configure: Regenerate.
281 2009-04-27 Tristan Gingold <gingold@adacore.com>
283 * avr: New directory.
284 * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
285 * avr/config.in: New file, generated by autoheader.
286 * avr/configure: New file generated by autoconf.
287 * configure.ac: Add avr.
288 * configure: Regenerated.
290 2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
292 * Makefile.in: Add dummy install-pdf, html, and
293 install-html targets.
295 2009-01-18 Hans-Peter Nilsson <hp@axis.com>
297 * cris/sim-if.c: Include errno.h.
298 (cris_start_address, cris_program_offset): New variables.
299 (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
301 (cris_options): New options --cris-program-offset and
302 --cris-start-address.
303 (cris_option_handler): Handle new options.
304 (cris_program_offset_write, cris_set_section_offset_iterator)
305 (cris_offset_sections, cris_offset_sections): New functions.
306 (sim_load): Use cris_program_offset_write as function argument to
307 cris_load_elf_file, not sim_write.
308 (struct offsetinfo): New struct.
309 (cris_handle_interpreter): Fix typo in comment.
310 (sim_open): Call cris_offset_sections as soon as the bfd of the
311 infile is available. Gate bfd validity checks on abfd non-NULL.
312 (sim_create_inferior): Let cris_start_address when != -1 override
313 other start-address choices.
315 2009-01-06 Hans-Peter Nilsson <hp@axis.com>
317 * cris/traps.c (abort): Define to call sim_io_error.
318 (create_map): Make -1 imply a non-fixed address, not 0. All
319 callers changed. Only prefer the next higher unmapped address if
320 the last mapped address is no less than 0x40000000. Check that
321 the address to be mapped is not already mapped. Update head
323 (unmap_pages): Don't call abort when recursive call fails, just
324 note and return an error if a page in the range couldn't be unmapped.
325 (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
326 (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
327 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
328 non-MAP_FIXED argument overlapping existing map. For MAP_FIXED,
329 don't abort on page not being mapped. Handle non-anon filemap
330 with length padded to pagesize.
332 2009-01-03 Hans-Peter Nilsson <hp@axis.com>
334 * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
335 (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
336 (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
337 (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
338 (TARGET_AT_CLKTCK): Remove redundant macros.
339 (AUX_ENT): Adjust to use standard ELF AT_* macros.
340 (AUX_ENTF): Ditto. Remove always-0 middle argument. Update all
342 (sim_open): Also pass AT_SECURE.
344 * cris/sim-main.h (struct _sim_cpu): New member
345 set_target_thread_data.
346 * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
347 * cris/crisv10f.c: Ditto.
348 * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
349 (MY (f_specific_init)): Set new _sim_cpu member to new function.
350 * cris/traps.c (TARGET_SYS_set_thread_area): Define.
351 (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
354 * cris/traps.c (TARGET_SYS_exit_group): Define.
355 (cris_break_13_handler): Handle it like the exit for the last
358 * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
359 (TARGET_EPOCH): Update to match TARGET_UTSNAME. Correct comment.
360 (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
361 2.6.27. Set machine field to the BFD printable name of the
364 * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
365 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
366 TARGET_MAP_DENYWRITE.
368 * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
369 (TARGET_X_OK, TARGET_F_OK): Define.
370 (cris_break_13_handler) <case TARGET_SYS_access>: New case.
372 * cris/semcrisv32f-switch.c: Regenerate.
374 2008-12-30 Hans-Peter Nilsson <hp@axis.com>
376 * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
377 just a short CRIS-specific notice. Tweak the wording for a
378 failing architecture test.
380 * cris/traps.c (TARGET_SYS_writev): New macro.
381 (is_mapped_only, cris_dump_map): New functions.
382 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
383 and prot combinations and a non-zero page-offset. If
384 TARGET_MAP_FIXED, unmap pages before mapping them.
385 <case TARGET_SYS_mprotect>: When checking, allow any length
386 argument. Don't actually do anything.
387 <case TARGET_SYS_writev>: New case.
389 * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
390 * cris/sim-if.c: Include elf-bfd.h.
391 (struct progbounds): New members end_loadmem, start_nonloadmem.
392 (xprintf, eprintf): New functions, copied from common/sim-load.c.
393 (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
394 (get_progbounds_iterator): Renamed from get_progbounds. Make
395 static. Update head comment. Set new struct progbounds members.
396 (exec_load_addr, interp_load_addr, interp_start_addr): New static
398 (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
399 (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
401 (sim_open): New constant array auxv_entries. Rewrite AUX_ENT
402 handling to use auxv_entries. Improve error message and checking
403 for invalid programs. Use new variable abfd for the program
404 instead of for each access reaching into sd to get it.
405 (sim_create_inferior): If non-zero, use interp_start_addr instead
406 of the program start address.
407 (cris_disassemble_insn): Remove incorrect and unclear, supposedly
408 stale comment. Always specify little-endian.
410 2008-07-29 Nick Clifton <nickc@redhat.com>
412 * common/genmloop.sh: Add new parameter: -shell to specify the
413 command interpreter to use to run the input file. This is
414 necessary because otherwise SHELL is taken from the user's
415 environment, and not from the makefile that invoked this script
416 and the user might not be running an sh-like shell.
417 * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
418 * fr30/Makefile.in: Likewise.
419 * frv/Makefile.in: Likewise.
420 * i960/Makefile.in: Likewise.
421 * iq2000/Makefile.in: Likewise.
422 * m32r/Makefile.in: Likewise.
424 * frv/mloop.in: Add missing start of line comment marker.
426 2008-07-11 Hans-Peter Nilsson <hp@axis.com>
428 * cris/configure: Regenerate to track ../common/common.m4 changes.
429 * cris/config.in: Ditto.
431 2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
432 Daniel Jacobowitz <dan@codesourcery.com>
433 Joseph Myers <joseph@codesourcery.com>
435 * cris/configure: Regenerate.
437 2008-05-09 Olivier Hainque <hainque@adacore.com>
439 * ppc/altivec.igen (vperm): Latch inputs into temporaries.
441 2008-03-25 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
443 * MAINTAINERS: Add myself as maintainer of cr16 port.
445 2008-02-12 M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
447 Add simulator for National cr16 processor.
448 * cr16: New directory.
449 * configure.ac: Add entry for National cr16.
450 * configure: Regenerate.
452 2008-02-05 DJ Delorie <dj@redhat.com>
454 * configure.ac (v850): V850 now has a testsuite.
455 * configure (v850): Likewise.
457 2008-01-01 Daniel Jacobowitz <dan@codesourcery.com>
459 Updated copyright notices for most files.
461 2007-12-19 DJ Delorie <dj@redhat.com>
463 * frv/frv.c (frvbf_cut): Only look at the six LSBs of
466 2007-10-22 Hans-Peter Nilsson <hp@axis.com>
468 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
469 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
470 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
471 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
472 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
473 cris/semcrisv32f-switch.c: Regenerate.
475 2007-08-24 Joel Brobecker <brobecker@adacore.com>
477 Switch the license of all files explicitly copyright the FSF
480 2007-03-27 Brooks Moses <brooks.moses@codesourcery.com>
482 * Makefile.in: Add dummy "pdf" target.
484 2007-02-20 Hans-Peter Nilsson <hp@axis.com>
486 * cris/traps.c (dump_statistics): Change format for cycle numbers
487 to %llu and cast parameters to unsigned long long.
489 2007-02-16 Thiemo Seufer <ths@mips.com>
491 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
493 2007-01-28 Manuel Lauss <slauss@resi.at>
495 * configure.ac (sh64-*-*): Change to sh64*-*-*.
496 (sh-*-*): Change to sh*-*-*.
497 * configure: Regenerated.
499 2007-01-09 Daniel Jacobowitz <dan@codesourcery.com>
501 Updated copyright notices for most files.
503 2006-12-20 Hans-Peter Nilsson <hp@axis.com>
505 * Makefile.in (autoconf-common autoheader-common): Only run
506 autoheader on subdirs with a file config.in.
508 * configure.ac (common): Make the default "yes" for all targets
510 * configure: Regenerate.
512 * Makefile.in (autoconf-common autoheader-common): In documented
513 usage, say SHELL=/bin/sh.
514 (.PHONY): Add autoheader-common.
516 * MAINTAINERS: Add self as authorized committer for *.
518 2006-10-02 Edgar E. Iglesias <edgar@axis.com>
519 Hans-Peter Nilsson <hp@axis.com>
521 * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
522 (cris_unknown_syscall_action): Declare.
523 * cris/sim-if.c (cris_unknown_syscall_action): Define.
524 (cris_options): Add cris-unknown-syscall option.
525 (cris_option_handler): Correct comment about and error message for
526 invalid --cris-cycles argument. Handle --cris-unknown-syscall.
527 * cris/traps.c: Include stdarg.h
528 (cris_unknown_syscall): New function.
529 (cris_break_13_handler): Instead of sim_io_eprintf and
530 sim_engine_halt, call cris_unknown_syscall to handle more or less
531 unknown syscalls. Adjust code as necessary to handle return
534 2006-09-30 Daniel Jacobowitz <dan@codesourcery.com>
536 * MAINTAINERS: Add Dave Brolley for sh64.
538 2006-09-30 Hans-Peter Nilsson <hp@axis.com>
540 * cris/traps.c (TARGET_PIPE_BUF): New macro.
541 (cris_pipe_empty): Correct initialization of "remaining". Only
542 adjust the "write" return value if more than TARGET_PIPE_BUF bytes
545 2006-09-29 Hans-Peter Nilsson <hp@axis.com>
547 * cris/configure.ac: Check for limits.h and sys/param.h.
548 * cris/configure, cris/config.in: Rebuild.
549 * cris/traps.c (SIM_PATHMAX): New macro.
550 (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
552 2006-08-08 Joel Sherrill <joel.sherrill@oarcorp.com>
554 * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
555 * Makefile.in (FLAGS_TO_PASS): Include libdir.
556 * configure: Regenerated.
558 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
560 * cris/configure: Regenerated.
562 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
564 * cris/configure: Regenerated.
566 2006-05-05 Andreas Schwab <schwab@suse.de>
568 * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
569 * configure: Regenerate.
571 * Makefile.in (CFLAGS_FOR_BUILD): Define.
572 (CC_FOR_BUILD): Don't override.
573 (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
575 2006-05-04 Daniel Jacobowitz <dan@codesourcery.com>
577 * MAINTAINERS: Add an "Authorized committers" section, and list
580 2006-04-08 Hans-Peter Nilsson <hp@axis.com>
582 * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
584 2006-04-03 Hans-Peter Nilsson <hp@axis.com>
586 * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
587 * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
588 (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
589 (all): Depend on rvdummy$(EXEEXT).
590 * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS. Check for
591 sys/socket.h and sys/select.h. Call SIM_AC_OPTION_HARDWARE,
593 * cris/configure: Regenerate.
594 * cris/cris-sim.h (cris_have_900000xxif): Declare here.
595 (enum cris_interrupt_type, crisv10deliver_interrupt)
596 (crisv32deliver_interrupt: New declarations.
597 * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
598 sim_events_tickn and set state-events member work_pending when it's
599 time for the next event.
600 [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
601 interrupt-delivery function.
602 * cris/crisv10f.c (MY (deliver_interrupt)): New function.
603 * cris/crisv32f.c (MY (deliver_interrupt)): New function.
604 * cris/devices.c: Include hw-device.h.
605 (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
606 (device_io_write_buffer): Only perform 0x900000xx-functions if
607 cris_have_900000xxif is nonzero. Else if WITH_HW defined,
608 call hw_io_write_buffer. Add return 0 last in function.
609 * cris/sim-if.c (cris_have_900000xxif): Now global.
610 (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
611 Force "-model" option, effectively.
612 * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
613 (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
615 2006-04-02 Hans-Peter Nilsson <hp@axis.com>
617 * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
618 (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
619 (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
621 2006-03-13 DJ Delorie <dj@redhat.com>
623 * MAINTAINERS: Add self as m32c sim maintainer.
625 2006-02-23 Hans-Peter Nilsson <hp@axis.com>
627 * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
629 (cris_break_13_handler) <case TARGET_SYS_time>: New case.
631 2006-01-23 Jim Blandy <jimb@redhat.com>
633 Add simulator for Renesas M32C and M16C.
635 * m32c: New directory.
636 * configure.ac: Add entry for Renesas M32C.
637 * configure: Regenerate.
639 2006-01-10 Hans-Peter Nilsson <hp@axis.com>
641 * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
642 cycle count for the current insn.
644 2005-12-06 Hans-Peter Nilsson <hp@axis.com>
646 * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
647 cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
648 cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
649 cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
651 2005-12-05 Hans-Peter Nilsson <hp@axis.com>
653 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
654 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
655 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
656 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
657 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
658 cris/semcrisv32f-switch.c: Regenerate.
660 2005-11-20 Hans-Peter Nilsson <hp@axis.com>
662 * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
663 (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
665 (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
666 F_GETFL on fd 0, 1 and 2.
668 2005-11-17 Hans-Peter Nilsson <hp@axis.com>
670 * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
671 last_open_fd, last_open_flags.
672 * cris/traps.c: Don't include targ-vals.h.
673 (TARGET_O_ACCMODE): Define.
674 (cris_break_13_handler): Set new _sim_cpu members.
675 <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
676 Rearrange code as switch. Emit "unimplemented" abort for
677 unimplemented fcntl calls.
679 * cris/traps.c (TARGET_SYS_stat): Define.
680 (syscall_stat32_map): Add entry for TARGET_SYS_stat.
681 (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
683 2005-11-16 Hans-Peter Nilsson <hp@axis.com>
685 * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
686 low 32 bits are used after an unsigned long cast.
688 2005-05-28 Hans-Peter Nilsson <hp@axis.com>
690 * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
692 2005-05-26 Chris Demetriou <cgd@netbsd.org>
694 * MAINTAINERS: Update my mail address, move myself to the
695 "Past maintainers" section.
697 2005-05-17 Corinna Vinschen <vinschen@redhat.com>
699 * configure.ac: Add igen to v850 build.
700 * configure: Regenerate.
702 2005-04-29 Paul Brook <paul@codesourcery.com>
704 * common/callback.c (PIPE_BUF): Provide default definition.
705 (os_lstat): Use stat if lstat is not available on the host.
706 (os_ftruncate): Return EINVAL if not available on the host.
707 (os_truncate): Ditto.
708 * common/configure.ac: Check for lstat, truncate and ftruncate.
709 * common/configure: Regenerate.
710 * common/config.in: Regenerate.
712 2005-04-27 Paul Brook <paul@codesourcery.com>
714 * common/Make-common.in: Add $(EXEEXT) to "run".
716 2005-04-18 Hans-Peter Nilsson <hp@axis.com>
718 * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
719 For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
720 implemented. In call to create_map, pad length argument to 8k.
722 2005-04-15 Corinna Vinschen <vinschen@redhat.com>
724 * configure.ac: Add explicit sh64 case.
725 * configure: Regenerate.
727 2005-03-30 Paul Brook <paul@codesourcery.com>
729 * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
731 2005-03-24 Hans-Peter Nilsson <hp@axis.com>
733 * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
734 include cgen-ops.h in decodev10.c and decodev32.c.
735 * cris/sim-main.h: Don't include cgen-ops.h here.
736 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
737 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
738 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
739 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
740 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
741 cris/semcrisv32f-switch.c: Regenerate.
743 * cris/traps.c (cris_break_13_handler) <case
744 TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
745 sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
747 2005-03-23 Mark Kettenis <kettenis@gnu.org>
749 * cris/configure: Regenerate.
751 2005-02-28 Jim Blandy <jimb@redhat.com>
753 * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
754 mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
755 Regenerated, after change to common/aclocal.m4.
757 2005-02-18 Corinna Vinschen <vinschen@redhat.com>
759 * iq2000: New target subdirectory.
760 * configure.ac: Add iq2000 target.
761 * configure: Regenerate.
763 2005-01-29 Hans-Peter Nilsson <hp@axis.com>
765 * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
766 (realclean, install): Fail if subdir make failed.
768 2005-01-28 Hans-Peter Nilsson <hp@axis.com>
770 * cris: New directory, simulator for Axis Communications CRIS
771 including CRIS v32, CGEN-based.
772 * configure.ac: Add corresponding configury.
773 * configure: Regenerate.
775 2005-01-17 Andrew Cagney <cagney@gnu.org>
777 * configure.ac: For mips*-*-* and mn10300*-*-* configure the
778 common directory. Remove sparc*-*-* from list.
780 2005-01-11 Andrew Cagney <cagney@gnu.org>
782 * Makefile.in (autoconf-common autoheader-common): Add --force to
783 autoconf and autoheader.
784 (autoconf-common autoheader-common)
785 (autoconf-install autoheader-install): Check for configure.ac, not
787 * configure.ac: Delete AC_CONFIG_AUX_DIR.
788 * configure: Re-generate.
790 2005-01-07 Andrew Cagney <cagney@gnu.org>
792 * configure.ac: Replace configure.in. Requires autoconf 2.59 and
793 correctly calls AC_CONFIG_SUBDIRS.
794 * configure: Re-generate.
796 2004-12-01 Andrew Cagney <cagney@gnu.org>
798 * i960, h8500: Delete directory.
800 2004-11-12 Andrew Cagney <cagney@gnu.org>
802 * d30v, fr30, mn10200, z8k: Delete directory.
804 2004-03-10 Ben Elliston <bje@gnu.org>
806 * MAINTAINERS: Update my mail address.
808 2004-01-26 Chris Demetriou <cgd@broadcom.com>
810 * configure.in (mips*-*-*): Configure in testsuite.
811 * configure: Regenerate.
813 2003-10-08 Dave Brolley <brolley@redhat.com>
815 * configure.in: Move frv handling to alphabetically correct placement.
817 2003-09-03 Andreas Schwab <schwab@suse.de>
819 * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
821 2003-08-29 Dave Brolley <brolley@redhat.com>
823 * MAINTAINERS: Add myself as maintainer of the FRV port.
825 2003-08-20 Michael Snyder <msnyder@redhat.com>
826 Dave Brolley <brolley@redhat.com>
828 * frv/: New directory, simulator for the Fujitsu FRV.
829 * configure.in: Add frv configury.
830 * configure: Regenerate.
832 2003-08-10 Ben Elliston <bje@wasabisystems.com>
834 * MAINTAINERS: Update my mail address.
836 2003-08-09 Andrew Cagney <cagney@redhat.com>
838 * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
839 maintenance. List igen and sh maintainers. Mention that target
840 and global maintainers pick up the slack.
842 2003-07-09 Michael Snyder <msnyder@redhat.com>
844 * configure.in: Add testsuite to extra_subdirs for sh.
845 * configure: Regenerate.
847 2003-01-23 Nick Clifton <nickc@redhat.com>
851 2002-04-02 Alexandre Oliva <aoliva@redhat.com>
853 * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
855 2002-08-24 Geoffrey Keating <geoffk@redhat.com>
857 * MAINTAINERS: Update my email address.
859 2002-07-17 Andrew Cagney <ac131313@redhat.com>
861 * w65/: Delete directory.
863 2002-07-16 Andrew Cagney <ac131313@redhat.com>
865 * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
866 * configure: Re-generate.
868 2002-07-13 Andrew Cagney <ac131313@redhat.com>
870 * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
871 * configure: Re-generate.
873 2002-06-16 Andrew Cagney <ac131313@redhat.com>
875 * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
876 id, date and host to be overriden by NAME, ID, DATE and HOST
877 respectfully. Use ISO dates.
879 Thu Jun 6 12:34:13 2002 Andrew Cagney <cagney@redhat.com>
881 * Makefile.in (ChangeLog): New makefile variable.
882 * README-HACKING: Mention the ChangeLog makefile variable.
884 2002-06-01 Andrew Cagney <ac131313@redhat.com>
886 * tic80/: Delete directory.
888 2002-05-16 Stephane Carrez <stcarrez@nerim.fr>
890 * MAINTAINERS: Update my email address.
892 2002-03-06 Stephane Carrez <Stephane.Carrez@worldnet.fr>
894 * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
896 2002-03-01 Frank Ch. Eigler <fche@redhat.com>
898 * MAINTAINERS: Record self as a co-maintainer of just common/.
900 2002-02-07 Nick Clifton <nickc@cambridge.redhat.com>
902 * MAINTAINERS: Point to GDB files describing overall maintaince
903 and check-in procedures.
905 2002-01-10 Nick Clifton <nickc@cambridge.redhat.com>
907 * MAINTAINERS: Add myself for ARM portions.
909 2001-10-19 Andrew Cagney <ac131313@redhat.com>
911 * configure.in: When Linux or NetBSD, enable PowerPC simulator.
912 * configure: Re-generate.
914 2001-02-16 Ben Elliston <bje@redhat.com>
916 * MAINTAINERS: Add myself for common portions.
918 2001-01-15 Chris Demetriou <cgd@broadcom.com>
920 * MAINTAINERS: Added self and Andrew for the mips sim.
922 2000-10-25 Geoff Keating <geoffk@cygnus.com>
924 * MAINTAINERS: Added self and Andrew for the ppc sim.
926 Thu Jul 27 21:26:26 2000 Andrew Cagney <cagney@b1.cygnus.com>
928 From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
929 * m68hc11: New directory.
931 * configure: Regenerate.
933 Tue Jul 4 13:43:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
935 * tic80: New directory.
936 * configure.in: Add configury.
937 * configure: Regenerate.
939 2000-04-20 Nick Clifton <nickc@cygnus.com>
941 * configure.in (extra_subdirs): Add testsuite to strongarm
943 * configure: Regenerate.
945 Sat Mar 4 16:48:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
947 * MAINTAINERS: New file. Blank.
949 1999-11-18 Ben Elliston <bje@cygnus.com>
951 * configure.in: Require autoconf 2.13 and remove obsolete
952 invocation of AC_C_CROSS.
953 * configure: Regenerate.
955 1999-09-29 Doug Evans <devans@casey.cygnus.com>
957 * configure.in: Configure the testsuite directory for thumb.
958 * configure: Regenerate.
960 1999-07-16 Ben Elliston <bje@cygnus.com>
962 * configure.in: Configure the testsuite directory for arm.
963 * configure: Regenerate.
965 1999-04-08 Nick Clifton <nickc@cygnus.com>
967 * configure.in: Add support for MCore target.
968 * configure: Regenerate.
970 1999-03-14 Stan Shebs <shebs@andros.cygnus.com>
972 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
973 RUNTEST instead of commenting out, fixes portability problem.
975 1999-02-08 Nick Clifton <nickc@cygnus.com>
977 * configure.in: Add support for StrongARM target.
978 * configure: Regenerate.
980 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
982 * configure.in: Require autoconf 2.12.1 or higher.
984 1998-12-08 James E Wilson <wilson@wilson-pc.cygnus.com>
986 * configure.in (i960-*-*): Add.
987 * configure: Rebuild.
989 Wed Nov 4 19:11:43 1998 Dave Brolley <brolley@cygnus.com>
991 * configure.in: Added case for fr30-*-*.
992 * configure: Regenerated.
994 Fri Sep 25 10:12:19 1998 Christopher Faylor <cgf@cygnus.com>
996 * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
997 to allow successful operation on Windows.
999 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
1001 * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
1002 check can be invoked recursively.
1004 Wed Apr 29 12:38:53 1998 Mark Alexander <marka@cygnus.com>
1006 * configure.in: Build simulator on sparclite and sparc86x targets.
1007 * configure: Regenerate.
1009 Sun Apr 26 15:21:01 1998 Tom Tromey <tromey@cygnus.com>
1011 * Makefile.in (autoconf-common autoheader-common): Don't pass -l
1012 to autoconf and autoheader.
1014 Fri Apr 24 11:14:13 1998 Tom Tromey <tromey@cygnus.com>
1016 * Makefile.in (autoconf-common autoheader-common): Pass `-l
1017 ../common' to autoconf and autoheader. Unconditionally run
1018 autoconf in every subdir.
1019 (autoconf-changelog autoheader-changelog): Unconditionally run
1020 commands in every subdir.
1021 (autoconf-install autoheader-install): Likewise.
1023 Tue Mar 24 17:12:43 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk>
1025 * Makefile.in: Get SHELL from configure.
1026 * (FLAGS_TO_PASS): Pass down SHELL.
1027 * configure: Regenerate with autoconf 2.12.1 to fix shell issues for
1030 Tue Mar 24 11::18:00 1998 Joyce Janczyn <janczyn@cygnus.com>
1032 * configure.in (extra_subdirs): Enable igen for mn10300.
1033 * configure: Re-generate.
1035 Tue Dec 2 10:10:42 1997 Nick Clifton <nickc@cygnus.com>
1037 * configure.in (extra_subdirs): Add support for thumb target.
1039 * configure (extra_subdirs): Add support for thumb target.
1041 Wed Oct 8 12:38:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
1043 * configure.in (extra_subdirs): Add IGEN directory when MIPS
1045 * configure: Regenerate.
1047 Fri Sep 12 13:10:31 1997 Andrew Cagney <cagney@b1.cygnus.com>
1049 * configure.in (extra_subdirs): v850ea needs igen.
1050 * configure: Re-generate.
1052 Mon Sep 1 16:48:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
1054 * configure.in (testdir): When a testsuite directory, add that to
1055 the list of confdirs.
1057 Tue Aug 19 11:17:46 1997 Andrew Cagney <cagney@b1.cygnus.com>
1059 * configure.in (extra_subdirs): Enable igen ready for V850.
1061 Tue Aug 26 15:14:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
1063 * configure.in (w65-*-*, only_if_enabled): Set.
1064 * configure: Re-generate.
1066 Mon Aug 25 16:26:53 1997 Andrew Cagney <cagney@b1.cygnus.com>
1068 * configure.in (sparc*-*-*, only_if_enabled): Set
1069 only_if_enabled=yes. Check only_if_enabled before enabling a
1071 * configure: Regenerate.
1073 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
1075 * configure.in (extra_subdirs): Add v850e target.
1077 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
1079 * configure.in (extra_subdirs): Add v850ea target.
1081 Fri Jul 25 11:40:47 1997 Doug Evans <dje@canuck.cygnus.com>
1083 * configure.in (sparc*-*-*): Don't build erc32.
1084 * configure: Regenerate.
1086 Thu Apr 24 00:47:20 1997 Doug Evans <dje@canuck.cygnus.com>
1088 * configure.in (m32r-*-*): New target.
1089 * configure: Regenerate.
1091 * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
1093 Mon Apr 21 22:57:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
1095 * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
1096 thought that .NOEXPORT was the default target.
1098 Fri Apr 11 17:18:07 1997 Ian Lance Taylor <ian@cygnus.com>
1100 * Makefile.in (clean mostlyclean): Restore targets accidentally
1101 deleted in earlier change.
1103 Thu Apr 3 12:20:32 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1105 * Makefile.in (autoheader-common, autoheader-changelog,
1106 autoheader-install): Perform autoheader in addition to autoconf.
1108 Wed Apr 2 15:09:05 1997 Doug Evans <dje@canuck.cygnus.com>
1110 * Makefile.in (autoconf-install): New target.
1111 (autoconf-changelog): Try different way to obtain user name.
1113 Wed Apr 2 14:25:52 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1115 * Makefile.in (autoconf-changelog): New target, update
1116 ChangeLog for all subdirectories - normally used after
1117 autoconf-common target.
1119 Wed Mar 19 14:26:21 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1121 * configure.in (extra_subdirs): Include testsuite for d30v.
1122 * configure: Regenerate.
1124 * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1126 (check): New rules - drive the testsuite.
1128 Mon Mar 3 13:01:00 1997 Jeffrey A Law (law@cygnus.com)
1130 * configure.in: Add mn10200 configure lines accidentally
1132 * configure: Regenerated.
1134 Wed Feb 19 10:34:20 1997 Andrew Cagney <cagney@critters.cygnus.com>
1136 * configure.in (extra_subdirs): Generalize common sub directory
1138 (extra_subdirs): For d30v add igen to the list to be built.
1140 Sun Feb 16 16:37:47 1997 Andrew Cagney <cagney@critters.cygnus.com>
1142 * configure.in (d30v): New target.
1143 * configure: Regenerated.
1145 Wed Feb 19 23:17:13 1997 Jeffrey A Law (law@cygnus.com)
1147 * configure.in: Don't require GCC to build the mn10200
1149 * configure: Rebuilt.
1151 Wed Feb 5 13:28:13 1997 Doug Evans <dje@canuck.cygnus.com>
1153 * configure.in: Don't configure any subdirs if no simulator
1154 is being built. Don't use erc32 for sparc64.
1155 * configure: Regenerated.
1157 Tue Feb 4 13:19:39 1997 Doug Evans <dje@canuck.cygnus.com>
1159 * Makefile.in (autoconf-common): New target.
1160 * configure.in: Do configure common.
1161 * configure: Regenerated.
1163 Thu Jan 23 13:59:52 1997 Stu Grossman (grossman@critters.cygnus.com)
1165 * configure configure.in: Don't configure common anymore. Files
1166 from common are now built in the individual simualtor directories.
1167 This fixes problems with the WinGDB build procedure.
1169 Mon Jan 13 13:16:42 1997 Jeffrey A Law (law@cygnus.com)
1171 * configure: Enable the mn10200 simulator.
1173 Wed Nov 20 01:00:36 1996 Doug Evans <dje@canuck.cygnus.com>
1175 * configure.in (configdirs): Add common.
1176 * configure: Regenerated.
1178 Fri Nov 1 08:03:30 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1180 * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1181 system V based targets.
1182 * configure: Regenerate.
1184 Thu Oct 17 12:50:08 1996 Doug Evans <dje@canuck.cygnus.com>
1186 * configure.in (--enable-sim-powerpc): Delete.
1187 (--enable-sim): Add.
1188 * configure: Regenerated.
1190 Fri Oct 11 21:13:43 1996 Jeffrey A Law (law@cygnus.com)
1192 * configure.in: Only build the V850 simulator if
1194 * configure: Rebuild.
1196 Sun Sep 8 17:22:50 1996 Ian Lance Taylor <ian@cygnus.com>
1198 * configure.in: Do build erc32 for DOS and Windows hosts.
1199 * configure: Rebuild.
1201 Wed Sep 4 18:11:27 1996 Stu Grossman (grossman@critters.cygnus.com)
1203 * Makefile.in erc32/Makefile.in: Don't set srcroot. This should
1204 be inherited from the parent. Remove INSTALL_XFORM and
1205 INSTALL_XFORM1. Make INSTALL be set from configure.
1207 Wed Sep 4 15:49:16 1996 Ian Lance Taylor <ian@cygnus.com>
1209 * configure.in: Only build the MIPS simulator if we are using
1211 * configure: Rebuild.
1213 Wed Aug 28 19:05:23 1996 Jeffrey A Law (law@cygnus.com)
1215 * configure.in (v850-*-*): Added V850 simulator.
1217 Thu Aug 1 17:08:41 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1219 * configure.in (d10v-*-*): Added D10V simulator.
1221 Wed Jun 26 12:33:57 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1223 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1224 INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1226 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1227 (AC_PROG_INSTALL): Added.
1228 * configure: Rebuilt.
1230 Mon Jun 24 14:18:26 1996 Ian Lance Taylor <ian@cygnus.com>
1232 * configure.in: Only configure erc32 if using gcc.
1233 * configure: Rebuild.
1235 Tue Jun 4 09:24:21 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1237 * configure.in (sim_target): Build PowerPC simulator for powerpc
1238 System V.4, Solaris, and Elf targets.
1239 * configure: Regenerate with autoconf 2.10.
1241 Wed May 22 12:10:49 1996 Rob Savoye <rob@chinadoll>
1243 * configure.in: Only built erc32 simulator on Unix hosts as it
1245 * configure: Regenerated with autoconf 2.8.
1247 Sun May 19 20:20:40 1996 Rob Savoye <rob@chinadoll.cygnus.com>
1249 * erc32: Sparc simulator from the ESA.
1251 Sun Apr 7 21:00:09 1996 Fred Fish <fnf@cygnus.com>
1253 From: Miles Bader <miles@gnu.ai.mit.edu>
1254 * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1255 * configure: Regenerate using autoconf.
1257 Thu Feb 22 11:31:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1259 * Makefile.in (install): Fix typo.
1261 Wed Feb 21 11:59:57 1996 Ian Lance Taylor <ian@cygnus.com>
1263 * configure: Regenerate with autoconf 2.7.
1265 * Makefile.in (all): Simplify.
1266 (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1267 as in the all target.
1268 (distclean, maintainer-clean, realclean): Likewise.
1269 (install): Likewise.
1271 Thu Feb 15 18:37:00 1996 Fred Fish <fnf@cygnus.com>
1273 * Makefile.in (all): Remove extra '\' char from shell script.
1275 Wed Feb 14 16:43:59 1996 Mike Meissner <meissner@tiktok.cygnus.com>
1277 * Makefile.in (all): Avoid a for loop with zero elements, even if
1278 the loop will not be executed because of an if statement.
1280 Wed Jan 31 21:48:34 1996 Fred Fish <fnf@cygnus.com>
1282 * Makefile.in (install): Add missing semicolon in "fi \".
1284 Thu Nov 9 16:10:56 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1286 * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1287 defaults from configure.
1289 * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1291 (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1292 if either --enable-sim-powerpc is used, or the host compiler is
1295 Wed Nov 8 15:46:49 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
1297 * configure.in (mips*-*-*): Added "mips" simulator target.
1298 * configure: Re-generated.
1300 Tue Oct 10 11:08:20 1995 Fred Fish <fnf@cygnus.com>
1302 * Makefile.in (BISON): Remove macro.
1303 (FLAGS_TO_PASS): Remove BISON.
1305 Sun Oct 8 04:26:27 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1307 * configure.in: Explicitly `exit 0' for broken shells.
1308 * configure: Rebuilt.
1310 Fri Oct 6 12:03:27 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1312 * common/run.c (main): Initialize the callbacks.
1314 Wed Sep 20 13:34:50 1995 Ian Lance Taylor <ian@cygnus.com>
1316 * Makefile.in (maintainer-clean): New synonym for realclean.
1318 Fri Aug 25 11:53:43 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1320 * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1321 the target is powerpc*-*-eabisim*, since it requires GCC to build.
1323 Mon Aug 21 17:53:48 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1325 * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1326 <cagney@highland.com.au>.
1327 * configure: Regnerate from configure.in.
1329 Thu Aug 3 10:45:37 1995 Fred Fish <fnf@cygnus.com>
1331 * Update all FSF addresses except those in COPYING* files.
1333 Thu Jul 20 15:17:29 1995 Fred Fish <fnf@cygnus.com>
1335 * Makefile.in (CC_FOR_BUILD): Define default and arrange to pass
1336 submakes either default or passed in value.
1338 Wed Jul 5 14:32:54 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1340 * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1341 install): Changed targets so that they descend all
1342 subdirectories in $(SUBDIRS).
1343 (*-all, *-clean, *-install): Removed targets.
1345 * configure.in: Don't bother with target makefile fragments, they
1346 are no longer needed.
1347 * configure: regenerated.
1349 * Makefile.in, configure.in: converted to autoconf.
1350 * configure: New file, generated with autconf 2.4.
1352 Wed May 24 14:48:46 1995 Steve Chamberlain <sac@slash.cygnus.com>
1354 * Makefile.in: Support ARM.
1355 * configure.in: Ditto.
1357 Sun Jan 15 16:53:47 1995 Steve Chamberlain <sac@splat>
1359 * Makefile.in: Support W65.
1360 * configure.in: Ditto.
1362 Sun Mar 13 09:27:50 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1364 * Makefile.in: Add TAGS target.
1366 Mon Sep 13 12:47:15 1993 K. Richard Pixley (rich@sendai.cygnus.com)
1368 * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1369 install-h8300, clean-h8300, all-h8500, install-h8500,
1370 clean-h8500, all-sh, install-sh, clean-sh): do not echo
1373 Wed Jun 30 14:12:05 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
1375 * Makefile.in: remove endian.h trace from h8500
1377 Sun Jun 13 13:08:58 1993 Jim Kingdon (kingdon@cygnus.com)
1379 * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1381 Fri May 21 11:21:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1383 * Makefile.in: make all of the all-* target (except all-nothing)
1384 depend on endian.h, so that if we're not building a simulator, we
1387 Fri May 21 10:55:06 1993 Ian Lance Taylor (ian@cygnus.com)
1389 * Makefile.in (check, installcheck): Added dummy targets.
1391 Mon May 3 21:39:43 1993 Fred Fish (fnf@cygnus.com)
1393 * Makefile.in (endian): Find endian.c in $(srcdir), and also
1394 explicitly make it, since some makes apparently don't work with
1395 VPATH and .c to executable rules (SunOS make for example).
1397 Mon May 3 08:29:01 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1399 * Makefile.in (endian): Add explicit rule for broken makes.
1401 Mon Mar 15 15:47:53 1993 Ian Lance Taylor (ian@cygnus.com)
1403 * Makefile.in (info, install-info): New targets.
1404 (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1407 Wed Feb 10 20:12:27 1993 K. Richard Pixley (rich@ok.cygnus.com)
1409 * Makefile.in (endian.h): build endian.h via a temporary file so
1410 that we don't leave an incomplete file lying around on
1412 (clean): remove endian, e.h, and endian.h.
1414 Mon Feb 8 11:46:06 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1416 * Makefile.in, configure.in: if target isn't supported, build a