sim/ChangeLog

   1 2018-12-06  Andrew Burgess  <andrew.burgess@embecosm.com>
   2
   3         * common/acinclude.m4 (enable-cgen-maint): Support passing path to
   4         cgen source tree.
   5         * cris/configure: Regenerate.
   6         * frv/configure: Regenerate.
   7         * iq2000/configure: Regenerate.
   8         * lm32/configure: Regenerate.
   9         * m32r/configure: Regenerate.
  10         * or1k/configure: Regenerate.
  11         * sh64/configure: Regenerate.
  12
  13 2018-10-05  Stafford Horne  <shorne@gmail.com>
  14
  15         * or1k/cpu.h: Regenerate.
  16         * or1k/decode.c: Regenerate.
  17         * or1k/decode.h: Regenerate.
  18         * or1k/model.c: Regenerate.
  19         * or1k/sem-switch.c: Regenerate.
  20         * or1k/sem.c: Regenerate:
  21
  22 2018-07-20  Maciej W. Rozycki  <macro@mips.com>
  23
  24         * MAINTAINERS: Update my e-mail address, downgrade to MIPS I-IV
  25         ISA maintenance.
  26
  27 2018-07-19  DJ Delorie  <dj@redhat.com>
  28
  29         * MAINTAINERS (rl78, m32c, rx, v850): Remove myself as maintainer.
  30
  31 2018-07-14  Stafford Horne  <shorne@gmail.com>
  32
  33         * MAINTAINERS (or1k): Add myself as or1k maintainer.
  34
  35 2018-06-19  Simon Marchi  <simon.marchi@ericsson.com>
  36
  37         * All configure.ac: Remove AC_PREREQ.
  38         * All configure: Re-generate.
  39
  40 2018-01-22  Maciej W. Rozycki  <macro@mips.com>
  41
  42         * MAINTAINERS: Update my company e-mail address.
  43
  44 2017-12-12  Stafford Horne  <shorne@gmail.com>
  45             Peter Gavin  <pgavin@gmail.com>
  46
  47         * configure: Regenerated.
  48         * or1k/aclocal.m4: Generated.
  49         * or1k/config.in: Generated.
  50         * or1k/configure: Generated.
  51
  52 2017-12-12  Stafford Horne  <shorne@gmail.com>
  53             Peter Gavin  <pgavin@gmail.com>
  54
  55         * or1k/arch.c: Generated.
  56         * or1k/arch.h: Generated.
  57         * or1k/cpu.c: Generated.
  58         * or1k/cpu.h: Generated.
  59         * or1k/cpuall.h: Generated.
  60         * or1k/decode.c: Generated.
  61         * or1k/decode.h: Generated.
  62         * or1k/model.c: Generated.
  63         * or1k/sem-switch.c: Generated.
  64         * or1k/sem.c: Generated.
  65
  66 2017-12-12  Stafford Horne  <shorne@gmail.com>
  67             Peter Gavin  <pgavin@gmail.com>
  68
  69         * configure.tgt: Add or1k sim.
  70         * or1k/README: New file.
  71         * or1k/Makefile.in: New file.
  72         * or1k/configure.ac: New file.
  73         * or1k/mloop.in: New file.
  74         * or1k/or1k-sim.h: New file.
  75         * or1k/or1k.c: New file.
  76         * or1k/sim-if.c: New file.
  77         * or1k/sim-main.h: New file.
  78         * or1k/traps.c: New file.
  79
  80 2017-11-01  James Bowman  <james.bowman@ftdichip.com>
  81
  82         * ft32/interp.c (step_once): Add ft32 shortcode decoder.
  83
  84 2017-10-12  James Bowman  <james.bowman@ftdichip.com>
  85
  86         * ft32/interp.c (step_once): Replace FT32_FLD_K8 with K15.
  87
  88 2017-10-12  James Bowman  <james.bowman@ftdichip.com>
  89
  90         * MAINTAINERS (ft32): Add myself.
  91
  92 2017-10-03  Jim Wilson  <wilson@tuliptree.org>
  93
  94         * MAINTAINERS (aarch64): Update my email address.
  95
  96 2017-09-06  John Baldwin  <jhb@FreeBSD.org>
  97
  98         * configure.ac: Honor existing CC_FOR_BUILD in environment.
  99         * configure: Regenerate.
 100
 101 2017-02-14  Jim Wilson  <jim.wilson@linaro.org>
 102
 103         * MAINTAINTERS (aarch64): Add myself.
 104
 105 2016-12-14  Maciej W. Rozycki  <macro@imgtec.com>
 106
 107         * MAINTAINERS (Maintainers for particular sims): Add myself as
 108         a MIPS maintainer.
 109
 110 2016-02-03  Maciej W. Rozycki  <macro@linux-mips.org>
 111
 112         * MAINTAINERS (Past sim maintainers): Add Thiemo Seufer.
 113
 114 2016-01-09  Mike Frysinger  <vapier@gentoo.org>
 115
 116         * configure.ac: Delete sim_common check and the
 117         AC_CONFIG_SUBDIRS(common) call.
 118         * configure: Regenerate.
 119         * configure.tgt (sim_common): Delete the variable.
 120
 121 2016-01-09  Mike Frysinger  <vapier@gentoo.org>
 122
 123         * .gitignore: Delete /common/cconfig.h entry.
 124
 125 2016-01-05  Nick Clifton  <nickc@redhat.com>
 126
 127         * MAINTAINERS: Add myself as AArch64 sim maintainer.
 128
 129 2015-12-09  Tristan Gingold  <gingold@adacore.com>
 130
 131         * aarch64/simulator.c: Remove syscall.h include.
 132
 133 2015-12-26  Mike Frysinger  <vapier@gentoo.org>
 134
 135         * README-HACKING: Delete mention of tconfig.h.
 136
 137 2015-11-24  Nick Clifton  <nickc@redhat.com>
 138
 139         * configure.tgt: Add aarch64 entry.
 140         * configure: Regenerate.
 141
 142 2015-06-23  Mike Frysinger  <vapier@gentoo.org>
 143
 144         * configure.ac (AC_ARG_ENABLE(sim)): Call AS_HELP_STRING.
 145         * configure: Regenerate.
 146
 147 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
 148
 149         * README-HACKING: Change configure.in to configure.ac.
 150
 151 2015-04-02  H.J. Lu  <hongjiu.lu@intel.com>
 152
 153         * arm/configure: Regenerated.
 154         * avr/configure: Likewise.
 155         * bfin/configure: Likewise.
 156         * common/configure: Likewise.
 157         * cr16/configure: Likewise.
 158         * cris/configure: Likewise.
 159         * d10v/configure: Likewise.
 160         * erc32/configure: Likewise.
 161         * frv/configure: Likewise.
 162         * ft32/configure: Likewise.
 163         * h8300/configure: Likewise.
 164         * igen/configure: Likewise.
 165         * iq2000/configure: Likewise.
 166         * lm32/configure: Likewise.
 167         * m32c/configure: Likewise.
 168         * m32r/configure: Likewise.
 169         * m68hc11/configure: Likewise.
 170         * mcore/configure: Likewise.
 171         * microblaze/configure: Likewise.
 172         * mips/configure: Likewise.
 173         * mn10300/configure: Likewise.
 174         * moxie/configure: Likewise.
 175         * msp430/configure: Likewise.
 176         * ppc/configure: Likewise.
 177         * rl78/configure: Likewise.
 178         * rx/configure: Likewise.
 179         * sh/configure: Likewise.
 180         * sh64/configure: Likewise.
 181         * v850/configure: Likewise.
 182
 183 2015-04-01  H.J. Lu  <hongjiu.lu@intel.com>
 184
 185         * common/Make-common.in (CSEARCH): Remove $(ZLIBINC).
 186         (BFD_LIB): Remove $(ZLIB).
 187         (CONFIG_LIBS): Add $(ZLIB).
 188         * ppc/Makefile.in (ZLIBINC): Removed.
 189         (INCLUDES): Remove $(ZLIBINC).
 190         (BFD_LIB): Remove $(ZLIB).
 191
 192 2015-04-01  H.J. Lu  <hongjiu.lu@intel.com>
 193
 194         * arm/configure: Regenerated.
 195         * avr/configure: Likewise.
 196         * bfin/configure: Likewise.
 197         * common/configure: Likewise.
 198         * cr16/configure: Likewise.
 199         * cris/configure: Likewise.
 200         * d10v/configure: Likewise.
 201         * erc32/configure: Likewise.
 202         * frv/configure: Likewise.
 203         * ft32/configure: Likewise.
 204         * h8300/configure: Likewise.
 205         * igen/configure: Likewise.
 206         * iq2000/configure: Likewise.
 207         * lm32/configure: Likewise.
 208         * m32c/configure: Likewise.
 209         * m32r/configure: Likewise.
 210         * m68hc11/configure: Likewise.
 211         * mcore/configure: Likewise.
 212         * microblaze/configure: Likewise.
 213         * mips/configure: Likewise.
 214         * mn10300/configure: Likewise.
 215         * moxie/configure: Likewise.
 216         * msp430/configure: Likewise.
 217         * ppc/configure: Likewise.
 218         * rl78/configure: Likewise.
 219         * rx/configure: Likewise.
 220         * sh/configure: Likewise.
 221         * sh64/configure: Likewise.
 222         * v850/configure: Likewise.
 223
 224 2015-03-29  Mike Frysinger  <vapier@gentoo.org>
 225
 226         * configure: Regenerate.
 227         * configure.ac: Delete sim_testsuite check and config in testsuite.
 228         * configure.tgt (sim_testsuite): Delete everywhere.
 229
 230 2015-03-28  Mike Frysinger  <vapier@gentoo.org>
 231
 232         * configure: Regenerate.
 233         * configure.tgt (avr*-*-*): Set sim_testsuite=yes.
 234
 235 2015-03-28  James Bowman  <james.bowman@ftdichip.com>
 236
 237         * configure.tgt: Add FT32 entry.
 238         * configure: Regenerate.
 239
 240 2015-03-16  Mike Frysinger  <vapier@gentoo.org>
 241
 242         * .gitignore: Delete tconfig.h.
 243         * README-HACKING: Change tconfig.in to tconfig.h.
 244
 245 2014-03-12  Nick Clifton  <nickc@redhat.com>
 246
 247         * MAINTAINERS: Add myself as the maintainer for the MSP430.
 248
 249 2014-03-10  Mike Frysinger  <vapier@gentoo.org>
 250
 251         * configure.tgt (msp430*-*-*): Set sim_testsuite to yes.
 252         * configure: Regenerate.
 253
 254 2014-01-06  Tom Tromey  <tromey@redhat.com>
 255
 256         * common/cgen-trace.c: Don't use old VA_* macros.
 257         * common/sim-load.c (xprintf): Likewise.
 258         * common/sim-trace.c (trace_printf, debug_printf): Likewise.
 259
 260 2014-01-06  Tom Tromey  <tromey@redhat.com>
 261
 262         * README-HACKING: Don't use PARAMS.
 263         * arm/wrapper.c: Don't use PARAMS.
 264         * bfin/sim-main.h: Don't use PARAMS.
 265         * common/callback.c: Don't use PARAMS.
 266         * common/cgen-trace.c: Don't use PARAMS.
 267         * common/run-sim.h: Don't use PARAMS.
 268         * common/run.c: Don't use PARAMS.
 269         * common/sim-base.h: Don't use PARAMS.
 270         * common/sim-load.c: Don't use PARAMS.
 271         * common/sim-options.h: Don't use PARAMS.
 272         * common/sim-trace.c: Don't use PARAMS.
 273         * common/sim-trace.h: Don't use PARAMS.
 274         * common/sim-utils.h: Don't use PARAMS.
 275         * cr16/cr16_sim.h: Don't use PARAMS.
 276         * cr16/gencode.c: Don't use PARAMS.
 277         * cr16/interp.c: Don't use PARAMS.
 278         * cr16/simops.c: Don't use PARAMS.
 279         * d10v/d10v_sim.h: Don't use PARAMS.
 280         * d10v/gencode.c: Don't use PARAMS.
 281         * d10v/interp.c: Don't use PARAMS.
 282         * d10v/simops.c: Don't use PARAMS.
 283         * erc32/erc32.c: Don't use PARAMS.
 284         * erc32/exec.c: Don't use PARAMS.
 285         * erc32/float.c: Don't use PARAMS.
 286         * erc32/func.c: Don't use PARAMS.
 287         * erc32/sis.c: Don't use PARAMS.
 288         * erc32/sis.h: Don't use PARAMS.
 289         * mips/interp.c: Don't use PARAMS.
 290         * mips/sim-main.h: Don't use PARAMS.
 291         * sh/interp.c: Don't use PARAMS.
 292         * v850/sim-main.h: Don't use PARAMS.
 293         * v850/v850_sim.h: Don't use PARAMS.
 294
 295 2013-11-07  Will Newton  <will.newton@linaro.org>
 296
 297         PR gdb/15508
 298         * arm/wrapper.c (sim_create_inferior): Call init before
 299         accessing STATE.
 300
 301 2013-11-07  Will Newton  <will.newton@linaro.org>
 302
 303         PR gdb/8989
 304         * arm/wrapper.c (sim_create_inferior): Avoid calling
 305         bfd_get_mach with a NULL bfd.
 306
 307 2013-06-21  Nick Clifton  <nickc@redhat.com>
 308
 309         * msp430: New Directory.
 310         * configure.tgt: Add it.
 311         * configure: Regenerate.
 312
 313 2013-03-15  Steve Ellcey  <sellcey@mips.com>
 314
 315         * arm/wrapper.c (sim_complete_command): Make char arguments const.
 316         * avr/interp.c (sim_complete_command): Ditto.
 317         * common/sim-options.c (sim_complete_command): Ditto.
 318         * cr16/interp.c (sim_complete_command): Ditto.
 319         * erc32/interf.c (sim_complete_command): Ditto.
 320         * m32c/gdb-if.c (sim_complete_command): Ditto.
 321         * microblaze/interp.c (sim_complete_command): Ditto.
 322         * ppc/sim_calls.c (sim_complete_command): Ditto.
 323         * rl78/gdb-if.c (sim_complete_command): Ditto.
 324         * rx/gdb-if.c (sim_complete_command): Ditto.
 325         * sh/interp.c (sim_complete_command): Ditto.
 326
 327 2013-01-01  Joel Brobecker  <brobecker@adacore.com>
 328
 329         Update year range in copyright notice of all files.
 330
 331 2012-12-19  Joel Brobecker  <brobecker@adacore.com>
 332
 333         Update old contact info in GPL license notices.
 334
 335 2012-12-19  Joel Brobecker  <brobecker@adacore.com>
 336
 337         Update the non-FSF-copyrighted files in sim to GPLv3 or later.
 338
 339 2012-11-20  Pavel Chupin  <pavel.v.chupin@intel.com>
 340
 341         * common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS
 342         condition.
 343         * common/acinclude.m4: Define lt_cv_dlopen_libs.
 344         * arm/configure: Regenerate.
 345         * avr/configure: Regenerate.
 346         * bfin/configure: Regenerate.
 347         * common/configure: Regenerate.
 348         * cr16/configure: Regenerate.
 349         * cris/configure: Regenerate.
 350         * d10v/configure: Regenerate.
 351         * erc32/configure: Regenerate.
 352         * frv/configure: Regenerate.
 353         * h8300/configure: Regenerate.
 354         * igen/configure: Regenerate.
 355         * iq2000/configure: Regenerate.
 356         * lm32/configure: Regenerate.
 357         * m32c/configure: Regenerate.
 358         * m32r/configure: Regenerate.
 359         * m68hc11/configure: Regenerate.
 360         * mcore/configure: Regenerate.
 361         * microblaze/configure: Regenerate.
 362         * mips/configure: Regenerate.
 363         * mn10300/configure: Regenerate.
 364         * moxie/configure: Regenerate.
 365         * ppc/configure: Regenerate.
 366         * rl78/configure: Regenerate.
 367         * rx/configure: Regenerate.
 368         * sh/configure: Regenerate.
 369         * sh64/configure: Regenerate.
 370         * testsuite/configure: Regenerate.
 371         * v850/configure: Regenerate.
 372
 373 2012-11-05  Stephane Carrez  <Stephane.Carrez@gmail.com>
 374
 375         * MAINTAINERS: Update my email address.
 376
 377 2012-09-24  Steve Ellcey  <sellcey@mips.com>
 378
 379         * mips/basic.exp: Add mips*-mti-elf* target.
 380         * configure.ac: Add mips*-mti-elf* target.
 381         * configure: Regenerate.
 382
 383 2012-06-15  Joel Brobecker  <brobecker@adacore.com>
 384
 385         * configure: Regenerate.
 386
 387 2012-06-06  Michael Eager  <eager@eagercon.com>
 388
 389         * microblaze/interp.c (config.h): Add #include.
 390
 391 2011-11-29  Joel Brobecker  <brobecker@adacore.com>
 392
 393         * MAINTAINERS (Global Maintainers): New section.  Add Mike
 394         Frysinger.
 395
 396 2011-11-28  DJ Delorie  <dj@redhat.com>
 397
 398         * configure.tgt: Add rl78 support.
 399         * configure: Regenerate.
 400         * rl78: New directory.
 401         * MAINTAINERS: Add myself as RL78 maintainer.
 402
 403 2011-07-08  Hans-Peter Nilsson  <hp@axis.com>
 404
 405         * MAINTAINERS: Remove Thiemo Seufer.
 406
 407 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
 408
 409         * configure.tgt (bfin-*-*): Add sim_testsuite=yes.
 410         * configure: Regenerate.
 411
 412 2011-05-04  Joseph Myers  <joseph@codesourcery.com>
 413
 414         * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
 415         handle targets.
 416         * configure: Regenerate.
 417
 418 2011-03-05  Mike Frysinger  <vapier@gentoo.org>
 419
 420         * MAINTAINERS: Add bfin entry.
 421         * configure.tgt (bfin-*-*): Handle bfin targets.
 422         * configure: Regenerate.
 423
 424 2011-01-05  Mike Frysinger  <vapier@gentoo.org>
 425
 426         * .gitignore: Add /*/hw-config.h.
 427
 428 2010-12-23  Mike Frysinger  <vapier@gentoo.org>
 429
 430         * .gitignore: New file.
 431
 432 2010-07-28  DJ Delorie  <dj@redhat.com>
 433
 434         * MAINTAINERS: Add self as RX maintainer.  Sort list.
 435
 436 2010-06-08  Nick Clifton  <nickc@redhat.com>
 437
 438         * reg.c (set_oszc): Use unsigned int for the mask.
 439         (set_szc, set_osz, set_sz): Likewise.
 440
 441 2010-04-26  Mike Frysinger  <vapier@gentoo.org>
 442
 443         * configure.ac: Target logic moved out to and included from ...
 444         * configure.tgt: ... this new file.
 445         * configure: Regenerated.
 446
 447 2010-04-12  Mike Frysinger  <vapier@gentoo.org>
 448
 449         * README-HACKING: Add more sections.
 450
 451 2010-02-11  Doug Evans  <dje@sebabeach.org>
 452
 453         * cris/cpuv10.h, * cris/cpuv32.h, * cris/cris-desc.c,
 454         * cris/cris-desc.h, * cris/decodev10.c, * cris/decodev32.c,
 455         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
 456         * cris/semcrisv32f-switch.c: Regenerate.
 457
 458 2010-01-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 459
 460         * avr/configure: Regenerate.
 461         * cris/configure: Regenerate.
 462         * microblaze/configure: Regenerate.
 463
 464 2010-01-02  Doug Evans  <dje@sebabeach.org>
 465
 466         * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c,
 467         * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c,
 468         * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c,
 469         * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h,
 470         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
 471         * cris/semcrisv32f-switch.c: Regenerate, update copyright year.
 472
 473 2010-01-01  Doug Evans  <dje@sebabeach.org>
 474
 475         * cris/mloop.in: Fix copyright year update snafu.
 476
 477 2009-11-24  Joel Brobecker  <brobecker@adacore.com>
 478
 479         * common/aclocal.m4: Add include of ../../config/zlib.m4.
 480         * common/common.m4: Use AM_ZLIB to check for zlib support.
 481         * ppc/configure.ac: Likewise.
 482         * arm/configure, avr/configure, common/configure, cr16/configure,
 483         cris/configure, d10v/configure, erc32/configure, frv/configure,
 484         h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
 485         m32r/configure, m68hc11/configure, mcore/configure,
 486         microblaze/configure, mips/configure, mn10300/configure,
 487         moxie/configure, ppc/configure, sh/configure, sh64/configure,
 488         v850/configure: Regenerate.
 489
 490 2009-11-24  DJ Delorie  <dj@redhat.com>
 491
 492         * rx: New directory.
 493         * configure.ac: Add entry for Renesas RX.
 494         * configure: Regenerate.
 495
 496 2009-11-22  Doug Evans  <dje@sebabeach.org>
 497
 498         * cris/cpuall.h: Regenerate.
 499         * cris/cpuv10.h: Regenerate.
 500         * cris/cpuv32.h: Regenerate.
 501         * cris/decodev10.c: Regenerate.
 502         * cris/decodev10.h: Regenerate.
 503         * cris/decodev32.c: Regenerate.
 504         * cris/decodev32.h: Regenerate.
 505
 506 2009-11-12  Tristan Gingold  <gingold@adacore.com>
 507
 508         * avr/interp.c (sim_write): Allow byte access.
 509         (sim_read): Ditto.
 510
 511 2009-11-12  Tristan Gingold  <gingold@adacore.com>
 512
 513         * avr/interp.c (sim_load): Clear memory before loading.
 514
 515 2009-11-09  Tristan Gingold  <gingold@adacore.com>
 516
 517         * avr/interp.c (sim_resume): Fix typo for OP_ret.
 518
 519 2009-10-23  Doug Evans  <dje@sebabeach.org>
 520
 521         * cris/arch.c: Regenerate.
 522         * cris/arch.h: Regenerate.
 523         * cris/cpuall.h: Regenerate.
 524         * cris/cpuv10.c: Regenerate.
 525         * cris/cpuv10.h: Regenerate.
 526         * cris/cpuv32.c: Regenerate.
 527         * cris/cpuv32.h: Regenerate.
 528         * cris/cris-desc.c: Regenerate.
 529         * cris/cris-desc.h: Regenerate.
 530         * cris/cris-opc.h: Regenerate.
 531         * cris/decodev10.c: Regenerate.
 532         * cris/decodev10.h: Regenerate.
 533         * cris/decodev32.c: Regenerate.
 534         * cris/decodev32.h: Regenerate.
 535         * cris/modelv10.c: Regenerate.
 536         * cris/modelv32.c: Regenerate.
 537         * cris/semcrisv10f-switch.c: Regenerate.
 538         * cris/semcrisv32f-switch.c: Regenerate.
 539
 540 2009-10-22  Tristan Gingold  <gingold@adacore.com>
 541
 542         * avr/interp.c (sim_stop): Return 1.
 543
 544 2009-10-16  Doug Evans  <dje@sebabeach.org>
 545
 546         * MAINTAINERS: Add myself as m32r maintainer.
 547
 548 2009-10-15  Michael Egaer  <eager@eagercon.com>
 549
 550         * MAINTAINERS: Add self as MicroBlaze maintainer.
 551
 552 2009-10-14  Ben Elliston  <bje@gnu.org>
 553
 554         * MAINTAINERS (common): Move myself to "past maintainers" section.
 555
 556 2009-10-06  Michael Eager  <eager@eagercon.com>
 557
 558         * microblaze/interp.c: Add include microblaze-dis.h.
 559
 560 2009-09-23  Michael Eager  <eager@eagercon.com>
 561
 562         * configure: Add microblaze-*.* (not regenerated).
 563         * configure.ac: Likewise.
 564         * microblaze/config.in: New.
 565         * microblaze/configure: Generate.
 566         * microblaze/configure.ac: New.
 567         * microblaze/interp.c: New.
 568         * microblaze/Makefile.in: New.
 569         * microblaze/microblaze.h: New.
 570         * microblaze/microblaze.isa: New.
 571         * microblaze/sim-main.h: New.
 572         * microblaze/sysdep.h: New.
 573
 574 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 575
 576         * avr/config.in: Regenerate.
 577         * avr/configure: Likewise.
 578         * configure: Likewise.
 579         * cris/config.in: Likewise.
 580         * cris/configure: Likewise.
 581
 582         * configure.ac: m4_include toplevel config/override.m4.
 583         * configure: Regenerate.
 584         * avr/configure: Regenerate.
 585         * cris/configure: Regenerate.
 586
 587 2009-07-30  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 588
 589         * Makefile.in (datarootdir): New variable.
 590
 591 2009-05-18  Jon Beniston <jon@beniston.com>
 592
 593         * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
 594         * configure.ac: Add lm32 target.
 595         * lm32: New directory.
 596
 597 2009-05-11  Andrew Cagney  <cagney@gnu.org>
 598
 599         * MAINTAINERS: Orphan ppc.
 600
 601 2009-05-08  Kevin Buettner  <kevinb@redhat.com>
 602
 603         * m32c/gdb-if.c (m32c_signal_to_host): Rename to
 604         m32c_signal_to_target.  Change signal return values from SIGILL,
 605         SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
 606         TARGET_SIGNAL_SEGV, etc.  Fix all callers.
 607
 608 2009-04-30  Anthony Green  <green@moxielogic.com>
 609
 610         * MAINTAINERS: Add myself for the moxie port.
 611         * moxie: New directory.
 612         * configure.ac: Add entry for moxie.
 613         * configure: Regenerate.
 614
 615 2009-04-27  Tristan Gingold  <gingold@adacore.com>
 616
 617         * avr: New directory.
 618         * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
 619         * avr/config.in: New file, generated by autoheader.
 620         * avr/configure: New file generated by autoconf.
 621         * configure.ac: Add avr.
 622         * configure: Regenerated.
 623
 624 2009-04-17  Carlos O'Donell  <carlos@codesourcery.com>
 625
 626         * Makefile.in: Add dummy install-pdf, html, and
 627         install-html targets.
 628
 629 2009-01-18  Hans-Peter Nilsson  <hp@axis.com>
 630
 631         * cris/sim-if.c: Include errno.h.
 632         (cris_start_address, cris_program_offset): New variables.
 633         (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
 634         enums.
 635         (cris_options): New options --cris-program-offset and
 636         --cris-start-address.
 637         (cris_option_handler): Handle new options.
 638         (cris_program_offset_write, cris_set_section_offset_iterator)
 639         (cris_offset_sections, cris_offset_sections): New functions.
 640         (sim_load): Use cris_program_offset_write as function argument to
 641         cris_load_elf_file, not sim_write.
 642         (struct offsetinfo): New struct.
 643         (cris_handle_interpreter): Fix typo in comment.
 644         (sim_open): Call cris_offset_sections as soon as the bfd of the
 645         infile is available.  Gate bfd validity checks on abfd non-NULL.
 646         (sim_create_inferior): Let cris_start_address when != -1 override
 647         other start-address choices.
 648
 649 2009-01-06  Hans-Peter Nilsson  <hp@axis.com>
 650
 651         * cris/traps.c (abort): Define to call sim_io_error.
 652         (create_map): Make -1 imply a non-fixed address, not 0.  All
 653         callers changed.  Only prefer the next higher unmapped address if
 654         the last mapped address is no less than 0x40000000.  Check that
 655         the address to be mapped is not already mapped.  Update head
 656         comment.
 657         (unmap_pages): Don't call abort when recursive call fails, just
 658         note and return an error if a page in the range couldn't be unmapped.
 659         (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
 660         (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
 661         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 662         non-MAP_FIXED argument overlapping existing map.  For MAP_FIXED,
 663         don't abort on page not being mapped.  Handle non-anon filemap
 664         with length padded to pagesize.
 665
 666 2009-01-03  Hans-Peter Nilsson  <hp@axis.com>
 667
 668         * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
 669         (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
 670         (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
 671         (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
 672         (TARGET_AT_CLKTCK): Remove redundant macros.
 673         (AUX_ENT): Adjust to use standard ELF AT_* macros.
 674         (AUX_ENTF): Ditto.  Remove always-0 middle argument.  Update all
 675         callers.
 676         (sim_open): Also pass AT_SECURE.
 677
 678         * cris/sim-main.h (struct _sim_cpu): New member
 679         set_target_thread_data.
 680         * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
 681         * cris/crisv10f.c: Ditto.
 682         * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
 683         (MY (f_specific_init)): Set new _sim_cpu member to new function.
 684         * cris/traps.c (TARGET_SYS_set_thread_area): Define.
 685         (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
 686         case.
 687
 688         * cris/traps.c (TARGET_SYS_exit_group): Define.
 689         (cris_break_13_handler): Handle it like the exit for the last
 690         thread.
 691
 692         * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
 693         (TARGET_EPOCH): Update to match TARGET_UTSNAME.  Correct comment.
 694         (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
 695         2.6.27.  Set machine field to the BFD printable name of the
 696         machine.
 697
 698         * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
 699         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 700         TARGET_MAP_DENYWRITE.
 701
 702         * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
 703         (TARGET_X_OK, TARGET_F_OK): Define.
 704         (cris_break_13_handler) <case TARGET_SYS_access>: New case.
 705
 706         * cris/semcrisv32f-switch.c: Regenerate.
 707
 708 2008-12-30  Hans-Peter Nilsson  <hp@axis.com>
 709
 710         * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
 711         just a short CRIS-specific notice.  Tweak the wording for a
 712         failing architecture test.
 713
 714         * cris/traps.c (TARGET_SYS_writev): New macro.
 715         (is_mapped_only, cris_dump_map): New functions.
 716         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
 717         and prot combinations and a non-zero page-offset.  If
 718         TARGET_MAP_FIXED, unmap pages before mapping them.
 719         <case TARGET_SYS_mprotect>: When checking, allow any length
 720         argument.  Don't actually do anything.
 721         <case TARGET_SYS_writev>: New case.
 722
 723         * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
 724         * cris/sim-if.c: Include elf-bfd.h.
 725         (struct progbounds): New members end_loadmem, start_nonloadmem.
 726         (xprintf, eprintf): New functions, copied from common/sim-load.c.
 727         (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
 728         (get_progbounds_iterator): Renamed from get_progbounds.  Make
 729         static.  Update head comment.  Set new struct progbounds members.
 730         (exec_load_addr, interp_load_addr, interp_start_addr): New static
 731         variables.
 732         (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
 733         (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
 734         functions.
 735         (sim_open): New constant array auxv_entries.  Rewrite AUX_ENT
 736         handling to use auxv_entries.  Improve error message and checking
 737         for invalid programs.  Use new variable abfd for the program
 738         instead of for each access reaching into sd to get it.
 739         (sim_create_inferior): If non-zero, use interp_start_addr instead
 740         of the program start address.
 741         (cris_disassemble_insn): Remove incorrect and unclear, supposedly
 742         stale comment.  Always specify little-endian.
 743
 744 2008-07-29  Nick Clifton  <nickc@redhat.com>
 745
 746         * common/genmloop.sh: Add new parameter: -shell to specify the
 747         command interpreter to use to run the input file.  This is
 748         necessary because otherwise SHELL is taken from the user's
 749         environment, and not from the makefile that invoked this script
 750         and the user might not be running an sh-like shell.
 751         * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
 752         * fr30/Makefile.in: Likewise.
 753         * frv/Makefile.in: Likewise.
 754         * i960/Makefile.in: Likewise.
 755         * iq2000/Makefile.in: Likewise.
 756         * m32r/Makefile.in: Likewise.
 757
 758         * frv/mloop.in: Add missing start of line comment marker.
 759
 760 2008-07-11  Hans-Peter Nilsson  <hp@axis.com>
 761
 762         * cris/configure: Regenerate to track ../common/common.m4 changes.
 763         * cris/config.in: Ditto.
 764
 765 2008-06-06  Vladimir Prus  <vladimir@codesourcery.com>
 766             Daniel Jacobowitz  <dan@codesourcery.com>
 767             Joseph Myers  <joseph@codesourcery.com>
 768
 769         * cris/configure: Regenerate.
 770
 771 2008-05-09  Olivier Hainque  <hainque@adacore.com>
 772
 773         * ppc/altivec.igen (vperm): Latch inputs into temporaries.
 774
 775 2008-03-25  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 776
 777         * MAINTAINERS: Add myself as maintainer of cr16 port.
 778
 779 2008-02-12  M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
 780
 781         Add simulator for National cr16 processor.
 782         * cr16: New directory.
 783         * configure.ac: Add entry for National cr16.
 784         * configure: Regenerate.
 785
 786 2008-02-05  DJ Delorie  <dj@redhat.com>
 787
 788         * configure.ac (v850): V850 now has a testsuite.
 789         * configure (v850): Likewise.
 790
 791 2008-01-01  Daniel Jacobowitz  <dan@codesourcery.com>
 792
 793         Updated copyright notices for most files.
 794
 795 2007-12-19  DJ Delorie  <dj@redhat.com>
 796
 797         * frv/frv.c (frvbf_cut): Only look at the six LSBs of
 798         cut_point.
 799
 800 2007-10-22  Hans-Peter Nilsson  <hp@axis.com>
 801
 802         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 803         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 804         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 805         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 806         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 807         cris/semcrisv32f-switch.c: Regenerate.
 808
 809 2007-08-24  Joel Brobecker  <brobecker@adacore.com>
 810
 811         Switch the license of all files explicitly copyright the FSF
 812         to GPLv3.
 813
 814 2007-03-27  Brooks Moses  <brooks.moses@codesourcery.com>
 815
 816         * Makefile.in: Add dummy "pdf" target.
 817
 818 2007-02-20  Hans-Peter Nilsson  <hp@axis.com>
 819
 820         * cris/traps.c (dump_statistics): Change format for cycle numbers
 821         to %llu and cast parameters to unsigned long long.
 822
 823 2007-02-16  Thiemo Seufer  <ths@mips.com>
 824
 825         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
 826
 827 2007-01-28  Manuel Lauss  <slauss@resi.at>
 828
 829         * configure.ac (sh64-*-*): Change to sh64*-*-*.
 830         (sh-*-*): Change to sh*-*-*.
 831         * configure: Regenerated.
 832
 833 2007-01-09  Daniel Jacobowitz  <dan@codesourcery.com>
 834
 835         Updated copyright notices for most files.
 836
 837 2006-12-20  Hans-Peter Nilsson  <hp@axis.com>
 838
 839         * Makefile.in (autoconf-common autoheader-common): Only run
 840         autoheader on subdirs with a file config.in.
 841
 842         * configure.ac (common): Make the default "yes" for all targets
 843         with sim subdirs.
 844         * configure: Regenerate.
 845
 846         * Makefile.in (autoconf-common autoheader-common): In documented
 847         usage, say SHELL=/bin/sh.
 848         (.PHONY): Add autoheader-common.
 849
 850         * MAINTAINERS: Add self as authorized committer for *.
 851
 852 2006-10-02  Edgar E. Iglesias  <edgar@axis.com>
 853             Hans-Peter Nilsson  <hp@axis.com>
 854
 855         * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
 856         (cris_unknown_syscall_action): Declare.
 857         * cris/sim-if.c (cris_unknown_syscall_action): Define.
 858         (cris_options): Add cris-unknown-syscall option.
 859         (cris_option_handler): Correct comment about and error message for
 860         invalid --cris-cycles argument.  Handle --cris-unknown-syscall.
 861         * cris/traps.c: Include stdarg.h
 862         (cris_unknown_syscall): New function.
 863         (cris_break_13_handler): Instead of sim_io_eprintf and
 864         sim_engine_halt, call cris_unknown_syscall to handle more or less
 865         unknown syscalls.  Adjust code as necessary to handle return
 866         value.
 867
 868 2006-09-30  Daniel Jacobowitz  <dan@codesourcery.com>
 869
 870         * MAINTAINERS: Add Dave Brolley for sh64.
 871
 872 2006-09-30  Hans-Peter Nilsson  <hp@axis.com>
 873
 874         * cris/traps.c (TARGET_PIPE_BUF): New macro.
 875         (cris_pipe_empty): Correct initialization of "remaining".  Only
 876         adjust the "write" return value if more than TARGET_PIPE_BUF bytes
 877         are written.
 878
 879 2006-09-29  Hans-Peter Nilsson  <hp@axis.com>
 880
 881         * cris/configure.ac: Check for limits.h and sys/param.h.
 882         * cris/configure, cris/config.in: Rebuild.
 883         * cris/traps.c (SIM_PATHMAX): New macro.
 884         (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
 885
 886 2006-08-08  Joel Sherrill <joel.sherrill@oarcorp.com>
 887
 888         * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
 889         * Makefile.in (FLAGS_TO_PASS): Include libdir.
 890         * configure: Regenerated.
 891
 892 2006-06-05  Daniel Jacobowitz  <dan@codesourcery.com>
 893
 894         * cris/configure: Regenerated.
 895
 896 2006-05-31  Daniel Jacobowitz  <dan@codesourcery.com>
 897
 898         * cris/configure: Regenerated.
 899
 900 2006-05-05  Andreas Schwab  <schwab@suse.de>
 901
 902         * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
 903         * configure: Regenerate.
 904
 905         * Makefile.in (CFLAGS_FOR_BUILD): Define.
 906         (CC_FOR_BUILD): Don't override.
 907         (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
 908
 909 2006-05-04  Daniel Jacobowitz  <dan@codesourcery.com>
 910
 911         * MAINTAINERS: Add an "Authorized committers" section, and list
 912         DJ Delorie for v850.
 913
 914 2006-04-08  Hans-Peter Nilsson  <hp@axis.com>
 915
 916         * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
 917
 918 2006-04-03  Hans-Peter Nilsson  <hp@axis.com>
 919
 920         * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
 921         * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
 922         (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
 923         (all): Depend on rvdummy$(EXEEXT).
 924         * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS.  Check for
 925         sys/socket.h and sys/select.h.  Call SIM_AC_OPTION_HARDWARE,
 926         default off.
 927         * cris/configure: Regenerate.
 928         * cris/cris-sim.h (cris_have_900000xxif): Declare here.
 929         (enum cris_interrupt_type, crisv10deliver_interrupt)
 930         (crisv32deliver_interrupt: New declarations.
 931         * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
 932         sim_events_tickn and set state-events member work_pending when it's
 933         time for the next event.
 934         [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
 935         interrupt-delivery function.
 936         * cris/crisv10f.c (MY (deliver_interrupt)): New function.
 937         * cris/crisv32f.c (MY (deliver_interrupt)): New function.
 938         * cris/devices.c: Include hw-device.h.
 939         (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
 940         (device_io_write_buffer): Only perform 0x900000xx-functions if
 941         cris_have_900000xxif is nonzero.  Else if WITH_HW defined,
 942         call hw_io_write_buffer.  Add return 0 last in function.
 943         * cris/sim-if.c (cris_have_900000xxif): Now global.
 944         (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
 945         Force "-model" option, effectively.
 946         * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
 947         (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
 948
 949 2006-04-02  Hans-Peter Nilsson  <hp@axis.com>
 950
 951         * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
 952         (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
 953         (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
 954
 955 2006-03-13  DJ Delorie  <dj@redhat.com>
 956
 957         * MAINTAINERS: Add self as m32c sim maintainer.
 958
 959 2006-02-23  Hans-Peter Nilsson  <hp@axis.com>
 960
 961         * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
 962         mapping.
 963         (cris_break_13_handler) <case TARGET_SYS_time>: New case.
 964
 965 2006-01-23  Jim Blandy  <jimb@redhat.com>
 966
 967         Add simulator for Renesas M32C and M16C.
 968
 969         * m32c: New directory.
 970         * configure.ac: Add entry for Renesas M32C.
 971         * configure: Regenerate.
 972
 973 2006-01-10  Hans-Peter Nilsson  <hp@axis.com>
 974
 975         * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
 976         cycle count for the current insn.
 977
 978 2005-12-06  Hans-Peter Nilsson  <hp@axis.com>
 979
 980         * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
 981         cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
 982         cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
 983         cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
 984
 985 2005-12-05  Hans-Peter Nilsson  <hp@axis.com>
 986
 987         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 988         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 989         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 990         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 991         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 992         cris/semcrisv32f-switch.c: Regenerate.
 993
 994 2005-11-20  Hans-Peter Nilsson  <hp@axis.com>
 995
 996         * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
 997         (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
 998         TARGET_O_WRONLY.
 999         (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
1000         F_GETFL on fd 0, 1 and 2.
1001
1002 2005-11-17  Hans-Peter Nilsson  <hp@axis.com>
1003
1004         * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
1005         last_open_fd, last_open_flags.
1006         * cris/traps.c: Don't include targ-vals.h.
1007         (TARGET_O_ACCMODE): Define.
1008         (cris_break_13_handler): Set new _sim_cpu members.
1009         <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
1010         Rearrange code as switch.  Emit "unimplemented" abort for
1011         unimplemented fcntl calls.
1012
1013         * cris/traps.c (TARGET_SYS_stat): Define.
1014         (syscall_stat32_map): Add entry for TARGET_SYS_stat.
1015         (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
1016
1017 2005-11-16  Hans-Peter Nilsson  <hp@axis.com>
1018
1019         * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
1020         low 32 bits are used after an unsigned long cast.
1021
1022 2005-05-28  Hans-Peter Nilsson  <hp@axis.com>
1023
1024         * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
1025
1026 2005-05-26  Chris Demetriou  <cgd@netbsd.org>
1027
1028         * MAINTAINERS: Update my mail address, move myself to the
1029         "Past maintainers" section.
1030
1031 2005-05-17  Corinna Vinschen  <vinschen@redhat.com>
1032
1033         * configure.ac: Add igen to v850 build.
1034         * configure: Regenerate.
1035
1036 2005-04-29  Paul Brook  <paul@codesourcery.com>
1037
1038         * common/callback.c (PIPE_BUF): Provide default definition.
1039         (os_lstat): Use stat if lstat is not available on the host.
1040         (os_ftruncate): Return EINVAL if not available on the host.
1041         (os_truncate): Ditto.
1042         * common/configure.ac: Check for lstat, truncate and ftruncate.
1043         * common/configure: Regenerate.
1044         * common/config.in: Regenerate.
1045
1046 2005-04-27  Paul Brook  <paul@codesourcery.com>
1047
1048         * common/Make-common.in: Add $(EXEEXT) to "run".
1049
1050 2005-04-18  Hans-Peter Nilsson  <hp@axis.com>
1051
1052         * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
1053         For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
1054         implemented.  In call to create_map, pad length argument to 8k.
1055
1056 2005-04-15  Corinna Vinschen  <vinschen@redhat.com>
1057
1058         * configure.ac: Add explicit sh64 case.
1059         * configure: Regenerate.
1060
1061 2005-03-30  Paul Brook  <paul@codesourcery.com>
1062
1063         * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
1064
1065 2005-03-24  Hans-Peter Nilsson  <hp@axis.com>
1066
1067         * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
1068         include cgen-ops.h in decodev10.c and decodev32.c.
1069         * cris/sim-main.h: Don't include cgen-ops.h here.
1070         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
1071         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
1072         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
1073         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
1074         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
1075         cris/semcrisv32f-switch.c: Regenerate.
1076
1077         * cris/traps.c (cris_break_13_handler) <case
1078         TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
1079         sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
1080
1081 2005-03-23  Mark Kettenis  <kettenis@gnu.org>
1082
1083         * cris/configure: Regenerate.
1084
1085 2005-02-28  Jim Blandy  <jimb@redhat.com>
1086
1087         * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
1088         mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
1089         Regenerated, after change to common/aclocal.m4.
1090
1091 2005-02-18  Corinna Vinschen  <vinschen@redhat.com>
1092
1093         * iq2000: New target subdirectory.
1094         * configure.ac: Add iq2000 target.
1095         * configure: Regenerate.
1096
1097 2005-01-29  Hans-Peter Nilsson  <hp@axis.com>
1098
1099         * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
1100         (realclean, install): Fail if subdir make failed.
1101
1102 2005-01-28  Hans-Peter Nilsson  <hp@axis.com>
1103
1104         * cris: New directory, simulator for Axis Communications CRIS
1105         including CRIS v32, CGEN-based.
1106         * configure.ac: Add corresponding configury.
1107         * configure: Regenerate.
1108
1109 2005-01-17  Andrew Cagney  <cagney@gnu.org>
1110
1111         * configure.ac: For mips*-*-* and mn10300*-*-* configure the
1112         common directory.  Remove sparc*-*-* from list.
1113
1114 2005-01-11  Andrew Cagney  <cagney@gnu.org>
1115
1116         * Makefile.in (autoconf-common autoheader-common): Add --force to
1117         autoconf and autoheader.
1118         (autoconf-common autoheader-common)
1119         (autoconf-install autoheader-install): Check for configure.ac, not
1120         configure.in.
1121         * configure.ac: Delete AC_CONFIG_AUX_DIR.
1122         * configure: Re-generate.
1123
1124 2005-01-07  Andrew Cagney  <cagney@gnu.org>
1125
1126         * configure.ac: Replace configure.in.  Requires autoconf 2.59 and
1127         correctly calls AC_CONFIG_SUBDIRS.
1128         * configure: Re-generate.
1129
1130 2004-12-01  Andrew Cagney  <cagney@gnu.org>
1131
1132         * i960, h8500: Delete directory.
1133
1134 2004-11-12  Andrew Cagney  <cagney@gnu.org>
1135
1136         * d30v, fr30, mn10200, z8k: Delete directory.
1137
1138 2004-03-10  Ben Elliston  <bje@gnu.org>
1139
1140         * MAINTAINERS: Update my mail address.
1141
1142 2004-01-26  Chris Demetriou  <cgd@broadcom.com>
1143
1144         * configure.in (mips*-*-*): Configure in testsuite.
1145         * configure: Regenerate.
1146
1147 2003-10-08  Dave Brolley  <brolley@redhat.com>
1148
1149         * configure.in: Move frv handling to alphabetically correct placement.
1150
1151 2003-09-03  Andreas Schwab  <schwab@suse.de>
1152
1153         * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
1154
1155 2003-08-29  Dave Brolley  <brolley@redhat.com>
1156
1157         * MAINTAINERS: Add myself as maintainer of the FRV port.
1158
1159 2003-08-20  Michael Snyder  <msnyder@redhat.com>
1160             Dave Brolley  <brolley@redhat.com>
1161
1162         * frv/: New directory, simulator for the Fujitsu FRV.
1163         * configure.in: Add frv configury.
1164         * configure: Regenerate.
1165
1166 2003-08-10  Ben Elliston  <bje@wasabisystems.com>
1167
1168         * MAINTAINERS: Update my mail address.
1169
1170 2003-08-09  Andrew Cagney  <cagney@redhat.com>
1171
1172         * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
1173         maintenance.  List igen and sh maintainers.  Mention that target
1174         and global maintainers pick up the slack.
1175
1176 2003-07-09  Michael Snyder  <msnyder@redhat.com>
1177
1178         * configure.in: Add testsuite to extra_subdirs for sh.
1179         * configure: Regenerate.
1180
1181 2003-01-23  Nick Clifton  <nickc@redhat.com>
1182
1183         * Add sh2e support:
1184
1185 2002-04-02  Alexandre Oliva  <aoliva@redhat.com>
1186
1187         * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
1188
1189 2002-08-24  Geoffrey Keating  <geoffk@redhat.com>
1190
1191         * MAINTAINERS: Update my email address.
1192
1193 2002-07-17  Andrew Cagney  <ac131313@redhat.com>
1194
1195         * w65/: Delete directory.
1196
1197 2002-07-16  Andrew Cagney  <ac131313@redhat.com>
1198
1199         * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
1200         * configure: Re-generate.
1201
1202 2002-07-13  Andrew Cagney  <ac131313@redhat.com>
1203
1204         * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
1205         * configure: Re-generate.
1206
1207 2002-06-16  Andrew Cagney  <ac131313@redhat.com>
1208
1209         * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
1210         id, date and host to be overriden by NAME, ID, DATE and HOST
1211         respectfully.  Use ISO dates.
1212
1213 Thu Jun  6 12:34:13 2002  Andrew Cagney  <cagney@redhat.com>
1214
1215         * Makefile.in (ChangeLog): New makefile variable.
1216         * README-HACKING: Mention the ChangeLog makefile variable.
1217
1218 2002-06-01  Andrew Cagney  <ac131313@redhat.com>
1219
1220         * tic80/: Delete directory.
1221
1222 2002-05-16  Stephane Carrez  <stcarrez@nerim.fr>
1223
1224         * MAINTAINERS: Update my email address.
1225
1226 2002-03-06  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
1227
1228         * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
1229
1230 2002-03-01  Frank Ch. Eigler  <fche@redhat.com>
1231
1232         * MAINTAINERS: Record self as a co-maintainer of just common/.
1233
1234 2002-02-07  Nick Clifton  <nickc@cambridge.redhat.com>
1235
1236         * MAINTAINERS: Point to GDB files describing overall maintaince
1237         and check-in procedures.
1238
1239 2002-01-10  Nick Clifton  <nickc@cambridge.redhat.com>
1240
1241         * MAINTAINERS: Add myself for ARM portions.
1242
1243 2001-10-19  Andrew Cagney  <ac131313@redhat.com>
1244
1245         * configure.in: When Linux or NetBSD, enable PowerPC simulator.
1246         * configure: Re-generate.
1247
1248 2001-02-16  Ben Elliston  <bje@redhat.com>
1249
1250         * MAINTAINERS: Add myself for common portions.
1251
1252 2001-01-15  Chris Demetriou  <cgd@broadcom.com>
1253
1254         * MAINTAINERS: Added self and Andrew for the mips sim.
1255
1256 2000-10-25  Geoff Keating  <geoffk@cygnus.com>
1257
1258         * MAINTAINERS: Added self and Andrew for the ppc sim.
1259
1260 Thu Jul 27 21:26:26 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1261
1262         From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
1263         * m68hc11: New directory.
1264         * configure.in: Add.
1265         * configure: Regenerate.
1266
1267 Tue Jul  4 13:43:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1268
1269         * tic80: New directory.
1270         * configure.in: Add configury.
1271         * configure: Regenerate.
1272
1273 2000-04-20  Nick Clifton  <nickc@cygnus.com>
1274
1275         * configure.in (extra_subdirs): Add testsuite to strongarm
1276         directories.
1277         * configure: Regenerate.
1278
1279 Sat Mar  4 16:48:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1280
1281         * MAINTAINERS: New file.  Blank.
1282
1283 1999-11-18  Ben Elliston  <bje@cygnus.com>
1284
1285         * configure.in: Require autoconf 2.13 and remove obsolete
1286         invocation of AC_C_CROSS.
1287         * configure: Regenerate.
1288
1289 1999-09-29  Doug Evans  <devans@casey.cygnus.com>
1290
1291         * configure.in: Configure the testsuite directory for thumb.
1292         * configure: Regenerate.
1293
1294 1999-07-16  Ben Elliston  <bje@cygnus.com>
1295
1296         * configure.in: Configure the testsuite directory for arm.
1297         * configure: Regenerate.
1298
1299 1999-04-08  Nick Clifton  <nickc@cygnus.com>
1300
1301         * configure.in: Add support for MCore target.
1302         * configure: Regenerate.
1303
1304 1999-03-14  Stan Shebs  <shebs@andros.cygnus.com>
1305
1306         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
1307         RUNTEST instead of commenting out, fixes portability problem.
1308
1309 1999-02-08  Nick Clifton  <nickc@cygnus.com>
1310
1311         * configure.in: Add support for StrongARM target.
1312         * configure: Regenerate.
1313
1314 1999-01-04  Jason Molenda  (jsm@bugshack.cygnus.com)
1315
1316         * configure.in: Require autoconf 2.12.1 or higher.
1317
1318 1998-12-08  James E Wilson  <wilson@wilson-pc.cygnus.com>
1319
1320         * configure.in (i960-*-*): Add.
1321         * configure: Rebuild.
1322
1323 Wed Nov  4 19:11:43 1998  Dave Brolley  <brolley@cygnus.com>
1324
1325         * configure.in: Added case for fr30-*-*.
1326         * configure: Regenerated.
1327
1328 Fri Sep 25 10:12:19 1998  Christopher Faylor <cgf@cygnus.com>
1329
1330         * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
1331         to allow successful operation on Windows.
1332
1333 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
1334
1335         * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
1336         check can be invoked recursively.
1337
1338 Wed Apr 29 12:38:53 1998  Mark Alexander  <marka@cygnus.com>
1339
1340         * configure.in: Build simulator on sparclite and sparc86x targets.
1341         * configure: Regenerate.
1342
1343 Sun Apr 26 15:21:01 1998  Tom Tromey  <tromey@cygnus.com>
1344
1345         * Makefile.in (autoconf-common autoheader-common): Don't pass -l
1346         to autoconf and autoheader.
1347
1348 Fri Apr 24 11:14:13 1998  Tom Tromey  <tromey@cygnus.com>
1349
1350         * Makefile.in (autoconf-common autoheader-common): Pass `-l
1351         ../common' to autoconf and autoheader.  Unconditionally run
1352         autoconf in every subdir.
1353         (autoconf-changelog autoheader-changelog): Unconditionally run
1354         commands in every subdir.
1355         (autoconf-install autoheader-install): Likewise.
1356
1357 Tue Mar 24 17:12:43 1998  Stu Grossman  <grossman@bhuna.cygnus.co.uk>
1358
1359         * Makefile.in:  Get SHELL from configure.
1360         * (FLAGS_TO_PASS):  Pass down SHELL.
1361         * configure:  Regenerate with autoconf 2.12.1 to fix shell issues for
1362         NT native builds.
1363
1364 Tue Mar 24 11::18:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
1365
1366         * configure.in (extra_subdirs): Enable igen for mn10300.
1367         * configure: Re-generate.
1368
1369 Tue Dec  2 10:10:42 1997  Nick Clifton  <nickc@cygnus.com>
1370
1371         * configure.in (extra_subdirs): Add support for thumb target.
1372
1373         * configure (extra_subdirs): Add support for thumb target.
1374
1375 Wed Oct  8 12:38:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1376
1377         * configure.in (extra_subdirs): Add IGEN directory when MIPS
1378         target.
1379         * configure: Regenerate.
1380
1381 Fri Sep 12 13:10:31 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1382
1383         * configure.in (extra_subdirs): v850ea needs igen.
1384         * configure: Re-generate.
1385
1386 Mon Sep  1 16:48:23 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1387
1388         * configure.in (testdir): When a testsuite directory, add that to
1389         the list of confdirs.
1390
1391 Tue Aug 19 11:17:46 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1392
1393         * configure.in (extra_subdirs): Enable igen ready for V850.
1394
1395 Tue Aug 26 15:14:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1396
1397         * configure.in (w65-*-*, only_if_enabled): Set.
1398         * configure: Re-generate.
1399
1400 Mon Aug 25 16:26:53 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1401
1402         * configure.in (sparc*-*-*, only_if_enabled): Set
1403         only_if_enabled=yes.  Check only_if_enabled before enabling a
1404         simulator.
1405         * configure: Regenerate.
1406
1407 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1408
1409         * configure.in (extra_subdirs): Add v850e target.
1410
1411 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1412
1413         * configure.in (extra_subdirs): Add v850ea target.
1414
1415 Fri Jul 25 11:40:47 1997  Doug Evans  <dje@canuck.cygnus.com>
1416
1417         * configure.in (sparc*-*-*): Don't build erc32.
1418         * configure: Regenerate.
1419
1420 Thu Apr 24 00:47:20 1997  Doug Evans  <dje@canuck.cygnus.com>
1421
1422         * configure.in (m32r-*-*): New target.
1423         * configure: Regenerate.
1424
1425         * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
1426
1427 Mon Apr 21 22:57:55 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1428
1429         * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
1430         thought that .NOEXPORT was the default target.
1431
1432 Fri Apr 11 17:18:07 1997  Ian Lance Taylor  <ian@cygnus.com>
1433
1434         * Makefile.in (clean mostlyclean): Restore targets accidentally
1435         deleted in earlier change.
1436
1437 Thu Apr  3 12:20:32 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1438
1439         * Makefile.in (autoheader-common, autoheader-changelog,
1440         autoheader-install): Perform autoheader in addition to autoconf.
1441
1442 Wed Apr  2 15:09:05 1997  Doug Evans  <dje@canuck.cygnus.com>
1443
1444         * Makefile.in (autoconf-install): New target.
1445         (autoconf-changelog): Try different way to obtain user name.
1446
1447 Wed Apr  2 14:25:52 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1448
1449         * Makefile.in (autoconf-changelog): New target, update
1450         ChangeLog for all subdirectories - normally used after
1451         autoconf-common target.
1452
1453 Wed Mar 19 14:26:21 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1454
1455         * configure.in (extra_subdirs): Include testsuite for d30v.
1456         * configure: Regenerate.
1457
1458         * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1459         ../gdb/Makefile.in
1460         (check): New rules - drive the testsuite.
1461
1462 Mon Mar  3 13:01:00 1997  Jeffrey A Law  (law@cygnus.com)
1463
1464         * configure.in: Add mn10200 configure lines accidentally
1465         removed.
1466         * configure: Regenerated.
1467
1468 Wed Feb 19 10:34:20 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1469
1470         * configure.in (extra_subdirs): Generalize common sub directory
1471         into a list.
1472         (extra_subdirs): For d30v add igen to the list to be built.
1473
1474 Sun Feb 16 16:37:47 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1475
1476         * configure.in (d30v): New target.
1477         * configure: Regenerated.
1478
1479 Wed Feb 19 23:17:13 1997  Jeffrey A Law  (law@cygnus.com)
1480
1481         * configure.in: Don't require GCC to build the mn10200
1482         simulator anymore.
1483         * configure: Rebuilt.
1484
1485 Wed Feb  5 13:28:13 1997  Doug Evans  <dje@canuck.cygnus.com>
1486
1487         * configure.in: Don't configure any subdirs if no simulator
1488         is being built.  Don't use erc32 for sparc64.
1489         * configure: Regenerated.
1490
1491 Tue Feb  4 13:19:39 1997  Doug Evans  <dje@canuck.cygnus.com>
1492
1493         * Makefile.in (autoconf-common): New target.
1494         * configure.in: Do configure common.
1495         * configure: Regenerated.
1496
1497 Thu Jan 23 13:59:52 1997  Stu Grossman  (grossman@critters.cygnus.com)
1498
1499         * configure configure.in:  Don't configure common anymore.  Files
1500         from common are now built in the individual simualtor directories.
1501         This fixes problems with the WinGDB build procedure.
1502
1503 Mon Jan 13 13:16:42 1997  Jeffrey A Law  (law@cygnus.com)
1504
1505         * configure: Enable the mn10200 simulator.
1506
1507 Wed Nov 20 01:00:36 1996  Doug Evans  <dje@canuck.cygnus.com>
1508
1509         * configure.in (configdirs): Add common.
1510         * configure: Regenerated.
1511
1512 Fri Nov  1 08:03:30 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1513
1514         * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1515         system V based targets.
1516         * configure: Regenerate.
1517
1518 Thu Oct 17 12:50:08 1996  Doug Evans  <dje@canuck.cygnus.com>
1519
1520         * configure.in (--enable-sim-powerpc): Delete.
1521         (--enable-sim): Add.
1522         * configure: Regenerated.
1523
1524 Fri Oct 11 21:13:43 1996  Jeffrey A Law  (law@cygnus.com)
1525
1526         * configure.in: Only build the V850 simulator if
1527         we are using gcc.
1528         * configure: Rebuild.
1529
1530 Sun Sep  8 17:22:50 1996  Ian Lance Taylor  <ian@cygnus.com>
1531
1532         * configure.in: Do build erc32 for DOS and Windows hosts.
1533         * configure: Rebuild.
1534
1535 Wed Sep  4 18:11:27 1996  Stu Grossman  (grossman@critters.cygnus.com)
1536
1537         * Makefile.in erc32/Makefile.in:  Don't set srcroot.  This should
1538         be inherited from the parent.  Remove INSTALL_XFORM and
1539         INSTALL_XFORM1.  Make INSTALL be set from configure.
1540
1541 Wed Sep  4 15:49:16 1996  Ian Lance Taylor  <ian@cygnus.com>
1542
1543         * configure.in: Only build the MIPS simulator if we are using
1544         gcc.
1545         * configure: Rebuild.
1546
1547 Wed Aug 28 19:05:23 1996  Jeffrey A Law  (law@cygnus.com)
1548
1549         * configure.in (v850-*-*): Added V850 simulator.
1550
1551 Thu Aug  1 17:08:41 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1552
1553         * configure.in (d10v-*-*): Added D10V simulator.
1554
1555 Wed Jun 26 12:33:57 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
1556
1557         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1558         INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1559         (docdir): Removed.
1560         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1561         (AC_PROG_INSTALL): Added.
1562         * configure: Rebuilt.
1563
1564 Mon Jun 24 14:18:26 1996  Ian Lance Taylor  <ian@cygnus.com>
1565
1566         * configure.in: Only configure erc32 if using gcc.
1567         * configure: Rebuild.
1568
1569 Tue Jun  4 09:24:21 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1570
1571         * configure.in (sim_target): Build PowerPC simulator for powerpc
1572         System V.4, Solaris, and Elf targets.
1573         * configure: Regenerate with autoconf 2.10.
1574
1575 Wed May 22 12:10:49 1996  Rob Savoye  <rob@chinadoll>
1576
1577         * configure.in: Only built erc32 simulator on Unix hosts as it
1578         uses pseudo ttys.
1579         * configure: Regenerated with autoconf 2.8.
1580
1581 Sun May 19 20:20:40 1996  Rob Savoye  <rob@chinadoll.cygnus.com>
1582
1583         * erc32: Sparc simulator from the ESA.
1584
1585 Sun Apr  7 21:00:09 1996  Fred Fish  <fnf@cygnus.com>
1586
1587         From: Miles Bader  <miles@gnu.ai.mit.edu>
1588         * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1589         * configure: Regenerate using autoconf.
1590
1591 Thu Feb 22 11:31:50 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1592
1593         * Makefile.in (install): Fix typo.
1594
1595 Wed Feb 21 11:59:57 1996  Ian Lance Taylor  <ian@cygnus.com>
1596
1597         * configure: Regenerate with autoconf 2.7.
1598
1599         * Makefile.in (all): Simplify.
1600         (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1601         as in the all target.
1602         (distclean, maintainer-clean, realclean): Likewise.
1603         (install): Likewise.
1604
1605 Thu Feb 15 18:37:00 1996  Fred Fish  <fnf@cygnus.com>
1606
1607         * Makefile.in (all): Remove extra '\' char from shell script.
1608
1609 Wed Feb 14 16:43:59 1996  Mike Meissner  <meissner@tiktok.cygnus.com>
1610
1611         * Makefile.in (all): Avoid a for loop with zero elements, even if
1612         the loop will not be executed because of an if statement.
1613
1614 Wed Jan 31 21:48:34 1996  Fred Fish  <fnf@cygnus.com>
1615
1616         * Makefile.in (install): Add missing semicolon in "fi \".
1617
1618 Thu Nov  9 16:10:56 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1619
1620         * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1621         defaults from configure.
1622
1623         * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1624         configure defaults.
1625         (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1626         if either --enable-sim-powerpc is used, or the host compiler is
1627         GCC.
1628
1629 Wed Nov  8 15:46:49 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
1630
1631         * configure.in (mips*-*-*): Added "mips" simulator target.
1632         * configure: Re-generated.
1633
1634 Tue Oct 10 11:08:20 1995  Fred Fish  <fnf@cygnus.com>
1635
1636         * Makefile.in (BISON): Remove macro.
1637         (FLAGS_TO_PASS): Remove BISON.
1638
1639 Sun Oct  8 04:26:27 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1640
1641         * configure.in:  Explicitly `exit 0' for broken shells.
1642         * configure:  Rebuilt.
1643
1644 Fri Oct  6 12:03:27 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1645
1646         * common/run.c (main): Initialize the callbacks.
1647
1648 Wed Sep 20 13:34:50 1995  Ian Lance Taylor  <ian@cygnus.com>
1649
1650         * Makefile.in (maintainer-clean): New synonym for realclean.
1651
1652 Fri Aug 25 11:53:43 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1653
1654         * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1655         the target is powerpc*-*-eabisim*, since it requires GCC to build.
1656
1657 Mon Aug 21 17:53:48 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1658
1659         * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1660         <cagney@highland.com.au>.
1661         * configure: Regnerate from configure.in.
1662
1663 Thu Aug  3 10:45:37 1995  Fred Fish  <fnf@cygnus.com>
1664
1665         * Update all FSF addresses except those in COPYING* files.
1666
1667 Thu Jul 20 15:17:29 1995  Fred Fish  <fnf@cygnus.com>
1668
1669         * Makefile.in (CC_FOR_BUILD):  Define default and arrange to pass
1670         submakes either default or passed in value.
1671
1672 Wed Jul  5 14:32:54 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1673
1674         * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1675           install): Changed targets so that they descend all
1676           subdirectories in $(SUBDIRS).
1677           (*-all, *-clean, *-install): Removed targets.
1678
1679         * configure.in: Don't bother with target makefile fragments, they
1680           are no longer needed.
1681         * configure: regenerated.
1682
1683         * Makefile.in, configure.in: converted to autoconf.
1684         * configure: New file, generated with autconf 2.4.
1685
1686 Wed May 24 14:48:46 1995  Steve Chamberlain  <sac@slash.cygnus.com>
1687
1688         * Makefile.in: Support ARM.
1689         * configure.in: Ditto.
1690
1691 Sun Jan 15 16:53:47 1995  Steve Chamberlain  <sac@splat>
1692
1693         * Makefile.in: Support W65.
1694         * configure.in: Ditto.
1695
1696 Sun Mar 13 09:27:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1697
1698         * Makefile.in: Add TAGS target.
1699
1700 Mon Sep 13 12:47:15 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
1701
1702         * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1703           install-h8300, clean-h8300, all-h8500, install-h8500,
1704           clean-h8500, all-sh, install-sh, clean-sh): do not echo
1705           recursion lines.
1706
1707 Wed Jun 30 14:12:05 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
1708
1709         * Makefile.in: remove endian.h trace from h8500
1710
1711 Sun Jun 13 13:08:58 1993  Jim Kingdon  (kingdon@cygnus.com)
1712
1713         * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1714
1715 Fri May 21 11:21:16 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1716
1717         * Makefile.in: make all of the all-* target (except all-nothing)
1718         depend on endian.h, so that if we're not building a simulator, we
1719         don't built endian
1720
1721 Fri May 21 10:55:06 1993  Ian Lance Taylor  (ian@cygnus.com)
1722
1723         * Makefile.in (check, installcheck): Added dummy targets.
1724
1725 Mon May  3 21:39:43 1993  Fred Fish  (fnf@cygnus.com)
1726
1727         * Makefile.in (endian): Find endian.c in $(srcdir), and also
1728         explicitly make it, since some makes apparently don't work with
1729         VPATH and .c to executable rules (SunOS make for example).
1730
1731 Mon May  3 08:29:01 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1732
1733         * Makefile.in (endian): Add explicit rule for broken makes.
1734
1735 Mon Mar 15 15:47:53 1993  Ian Lance Taylor  (ian@cygnus.com)
1736
1737         * Makefile.in (info, install-info): New targets.
1738         (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1739         level Makefile.
1740
1741 Wed Feb 10 20:12:27 1993  K. Richard Pixley  (rich@ok.cygnus.com)
1742
1743         * Makefile.in (endian.h): build endian.h via a temporary file so
1744           that we don't leave an incomplete file lying around on
1745           interrupted builds.
1746           (clean): remove endian, e.h, and endian.h.
1747
1748 Mon Feb  8 11:46:06 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1749
1750         * Makefile.in, configure.in: if target isn't supported, build a
1751         harmless makefile.
1752
1753