1 2017-02-14 Jim Wilson <jim.wilson@linaro.org>
3 * simulator.c (do_vec_MLA): Rewrite switch body.
5 * simulator.c (do_vec_bit): Change loop limits from 16 and 8 to 4 and
6 2. Move test_false if inside loop. Fix logic for computing result
9 * simulator.c: (LDn_STn_SINGLE_LANE_AND_SIZE): New.
10 (do_vec_LDn_single, do_vec_STn_single): New.
11 (do_vec_LDnR): Add and set new nregs var. Replace switch on nregs with
12 loop over nregs using new var n. Add n times size to address in loop.
14 (do_vec_load_store): Add comment for instruction bit 24. New var
15 single to hold instruction bit 24. Add new code to use single. Move
16 ldnr support inside single if statements. Fix ldnr register counts
17 inside post if statement. Change HALT_NYI calls to HALT_UNALLOC.
19 2017-01-23 Jim Wilson <jim.wilson@linaro.org>
21 * simulator.c (do_vec_compare): Add case 0x23 for CMTST.
23 2017-01-17 Jim Wilson <jim.wilson@linaro.org>
25 * simulator.c (do_vec_ADDV): Call aarch64_set_vec_u64 instead of
26 aarch64_set_reg_u64. In case 2, call HALT_UNALLOC if not full. In
27 case 3, call HALT_UNALLOC unconditionally.
28 (do_vec_XTN): Delete shifts. In case 2, change index from i + 4 to
29 i + 2. Delete if on bias, change index to i + bias * X.
31 2017-01-09 Jim Wilson <jim.wilson@linaro.org>
33 * simulator.c (do_vec_UZP): Rewrite.
35 2017-01-04 Jim Wilson <jim.wilson@linaro.org>
37 * cpustate.c: Include math.h.
38 (aarch64_set_FP_float): Use signbit to check for signed zero.
39 (aarch64_set_FP_double): Likewise.
40 * simulator.c (do_vec_MOV_immediate, case 0x8): Add missing break.
41 (do_vec_mul): In all DO_VEC_WIDENING_MUL calls, make second and fourth
42 args same size as third arg.
43 (fmaxnm): Use isnan instead of fpclassify.
44 (fminnm, dmaxnm, dminnm): Likewise.
45 (do_vec_MLS): Reverse order of subtraction operands.
46 (dexSimpleFPCondSelect): Call aarch64_get_FP_double or
47 aarch64_get_FP_float to get source register contents.
48 (UINT_MIN, ULONG_MIN, FLOAT_UINT_MAX, FLOAT_UINT_MIN,
49 DOUBLE_UINT_MAX, DOUBLE_UINT_MIN, FLOAT_ULONG_MAX, FLOAT_ULONG_MIN,
50 DOUBLE_ULONG_MAX, DOUBLE_ULONG_MIN): New.
51 (do_fcvtzu): Use ULONG instead of LONG, and UINT instead of INT in
52 raise_exception calls.
54 2016-12-21 Jim Wilson <jim.wilson@linaro.org>
56 * simulator.c (set_flags_for_float_compare): Add code to handle Inf.
57 Add comment to document NaN issue.
58 (set_flags_for_double_compare): Likewise.
60 2016-12-13 Jim Wilson <jim.wilson@linaro.org>
62 * simulator.c (NEG, POS): Move before set_flags_for_add64.
63 (set_flags_for_add64): Replace with a modified copy of
66 2016-12-03 Jim Wilson <jim.wilson@linaro.org>
68 * simulator.c (tbnz, tbz): Cast 1 to uint64_t before shifting.
69 (dexTestBranchImmediate): Shift high bit of pos by 5 not 4.
71 2016-12-01 Jim Wilson <jim.wilson@linaro.org>
73 * simulator.c (fsturs): Switch use of rn and st variables.
74 (fsturd, fsturq): Likewise
76 2016-08-15 Mike Frysinger <vapier@gentoo.org>
78 * interp.c: Include bfd.h.
79 (symcount, symtab, aarch64_get_sym_value): Delete.
80 (remove_useless_symbols): Change count type to long.
81 (aarch64_get_func): Add SIM_DESC to arg list. Add symcount
82 and symtab local variables.
83 (sim_create_inferior): Delete storage. Replace symbol code
84 with a call to trace_load_symbols.
85 * memory.c: Delete bfd.h, elf/internal.h, and elf/common.h
87 (aarch64_get_heap_start): Change aarch64_get_sym_value to
89 * memory.h: Delete bfd.h include.
90 (mem_add_blk): Delete unused prototype.
91 * simulator.c (bl, blr): Pass SIM_DESC to aarch64_get_func.
92 * simulator.c (aarch64_get_func): Add SIM_DESC to arg list.
93 (aarch64_get_sym_value): Delete.
95 2016-08-12 Nick Clifton <nickc@redhat.com>
97 * simulator.c (aarch64_step): Revert pervious delta.
98 (aarch64_run): Call sim_events_tick after each
99 instruction is simulated, and if necessary call
101 * simulator.h: Revert previous delta.
103 2016-08-11 Nick Clifton <nickc@redhat.com>
105 * interp.c (sim_create_inferior): Allow for being called with a
106 NULL abfd parameter. If a bfd is provided, initialise the sim
107 with that start address.
108 * simulator.c (HALT_NYI): Just print out the numeric value of the
109 instruction when not tracing.
110 (aarch64_step): Change from static to global.
111 * simulator.h: Add a prototype for aarch64_step().
113 2016-07-27 Alan Modra <amodra@gmail.com>
115 * memory.c: Don't include libbfd.h.
117 2016-07-21 Nick Clifton <nickc@redhat.com>
119 * simulator.c (fsqrts): Use sqrtf rather than sqrt.
121 2016-06-30 Jim Wilson <jim.wilson@linaro.org>
123 * cpustate.h: Include config.h.
124 (union GRegisterValue): Add WORDS_BIGENDIAN check. For big endian code
125 use anonymous structs to align members.
126 * simulator.c (aarch64_step): Use sim_core_read_buffer and
127 endian_le2h_4 to read instruction from pc.
129 2016-05-06 Nick Clifton <nickc@redhat.com>
131 * simulator.c (do_FMLA_by_element): New function.
132 (do_vec_op2): Call it.
134 2016-04-27 Nick Clifton <nickc@redhat.com>
136 * simulator.c: Add TRACE_DECODE statements to all emulation
139 2016-03-30 Nick Clifton <nickc@redhat.com>
141 * cpustate.c (aarch64_set_reg_s32): New function.
142 (aarch64_set_reg_u32): New function.
143 (aarch64_get_FP_half): Place half precision value into the correct
145 (aarch64_set_FP_half): Likewise.
146 * cpustate.h: Add prototypes for aarch64_set_reg_s32 and
148 * memory.c (FETCH_FUNC): Cast the read value to the access type
149 before converting it to the return type. Rename to FETCH_FUNC64.
150 (FETCH_FUNC32): New macro. Duplicates FETCH_FUNC64 but for 32-bit
151 accesses. Use for 32-bit memory access functions.
152 * simulator.c (ldrsb_wb): Use sign extension not zero extension.
153 (ldrb_scale_ext, ldrsh32_abs, ldrsh32_wb): Likewise.
154 (ldrsh32_scale_ext, ldrsh_abs, ldrsh64_wb): Likewise.
155 (ldrsh_scale_ext, ldrsw_abs): Likewise.
156 (ldrh32_abs): Store 32 bit value not 64-bits.
157 (ldrh32_wb, ldrh32_scale_ext): Likewise.
158 (do_vec_MOV_immediate): Fix computation of val.
159 (do_vec_MVNI): Likewise.
160 (DO_VEC_WIDENING_MUL): New macro.
161 (do_vec_mull): Use new macro.
162 (do_vec_mul): Use new macro.
163 (do_vec_MLA): Read values before writing.
164 (do_vec_xtl): Likewise.
165 (do_vec_SSHL): Select correct shift value.
166 (do_vec_USHL): Likewise.
167 (do_scalar_UCVTF): New function.
168 (do_scalar_vec): Call new function.
169 (store_pair_u64): Treat reads of SP as reads of XZR.
171 2016-03-29 Nick Clifton <nickc@redhat.com>
173 * cpustate.c: Remove space after asterisk in function parameters.
174 * decode.h (greg): Delete unused function.
175 (vreg, shift, extension, scaling, writeback, condcode): Likewise.
176 * simulator.c: Use INSTR macro in more places.
177 (HALT_NYI): Use sim_io_eprintf in place of fprintf.
178 Remove extraneous whitespace.
180 2016-03-23 Nick Clifton <nickc@redhat.com>
182 * cpustate.c (aarch64_get_FP_half): New function. Read a vector
183 register as a half precision floating point number.
184 (aarch64_set_FP_half): New function. Similar, but for setting
185 a half precision register.
186 (aarch64_get_thread_id): New function. Returns the value of the
187 CPU's TPIDR register.
188 (aarch64_get_FPCR): New function. Returns the value of the CPU's
189 floating point control register.
190 (aarch64_set_FPCR): New function. Set the value of the CPU's FPCR
192 * cpustate.h: Add prototypes for new functions.
193 * sim-main.h (struct _sim_cpu): Add FPCR and tpidr fields.
194 * memory.c: Use unaligned core access functions for all memory
196 * simulator.c (HALT_NYI): Generate an error message if tracing
197 will not tell the user why the simulator is halting.
198 (HALT_UNREACHABLE): Delete. Delete (unneeded) uses of the macro.
199 (INSTR): New time-saver macro.
200 (fldrb_abs): New function. Loads an 8-bit value using a scaled
202 (fldrh_abs): New function. Likewise for 16-bit values.
203 (do_vec_SSHL): Allow for negative shift values.
204 (do_vec_USHL): Likewise.
205 (do_vec_SHL): Correct computation of shift amount.
206 (do_vec_SSHR_USHR): Correct decision of signed vs unsigned
207 shifts and computation of shift value.
208 (clz): New function. Counts leading zero bits.
209 (do_vec_CLZ): New function. Implements CLZ (vector).
210 (do_vec_MOV_element): Call do_vec_CLZ.
211 (dexSimpleFPCondCompare): Implement.
212 (do_FCVT_half_to_single): New function. Implements one of the
214 (do_FCVT_half_to_double): New function. Likewise.
215 (do_FCVT_single_to_half): New function. Likewise.
216 (do_FCVT_double_to_half): New function. Likewise.
217 (dexSimpleFPDataProc1Source): Call new FCVT functions.
218 (do_scalar_SHL): Handle negative shifts.
219 (do_scalar_shift): Handle SSHR.
220 (do_scalar_USHL): New function.
221 (do_double_add): Simplify to just performing a double precision
222 add operation. Move remaining code into...
223 (do_scalar_vec): ... New function.
224 (dexLoadUnsignedImmediate): Call new fldrb_abs and fldrh_abs
226 (system_get): Add support for TPIDR, CTR, FPCR, FPSR and CPSR
228 (system_set): New function.
229 (do_MSR_immediate): New function. Stub for now.
230 (do_MSR_reg): New function. Likewise. Partially implements MSR
232 (do_SYS): New function. Stub for now,
233 (dexSystem): Call new functions.
235 2016-03-18 Nick Clifton <nickc@redhat.com>
237 * cpustate.c: Remove spurious spaces from TRACE strings.
238 Print hex equivalents of floats and doubles.
239 Check element number against array size when accessing vector
241 (GET_VEC_ELEMENT): Fix off by one error checking for an invalid
243 (SET_VEC_ELEMENT): Likewise.
244 (GET_VEC_ELEMENT): And fix thinko using macro arguments.
246 * memory.c: Trace memory reads when --trace-memory is enabled.
247 Remove float and double load and store functions.
248 * memory.h (aarch64_get_mem_float): Delete prototype.
249 (aarch64_get_mem_double): Likewise.
250 (aarch64_set_mem_float): Likewise.
251 (aarch64_set_mem_double): Likewise.
252 * simulator (IS_SET): Always return either 0 or 1.
253 (IS_CLEAR): Likewise.
254 (fldrs_pcrel): Load and store floats using 32-bit memory accesses
255 and doubles using 64-bit memory accesses.
256 (fldrd_pcrel, fldrs_wb, fldrs_abs, fldrs_scale_ext): Likewise.
257 (fldrd_wb, fldrd_abs, fsturs, fsturd, fldurs, fldurd): Likewise.
258 (fstrs_abs, fstrs_wb, fstrs_scale_ext, fstrd_abs): Likewise.
259 (fstrd_wb, fstrd_scale_ext, store_pair_float): Likewise.
260 (store_pair_double, load_pair_float, load_pair_double): Likewise.
261 (do_vec_MUL_by_element): New function.
262 (do_vec_op2): Call do_vec_MUL_by_element.
263 (do_scalar_NEG): New function.
264 (do_double_add): Call do_scalar_NEG.
266 2016-03-03 Nick Clifton <nickc@redhat.com>
268 * simulator.c (set_flags_for_sub32): Correct type of signbit.
269 (CondCompare): Swap interpretation of bit 30.
270 (DO_ADDP): Delete macro.
271 (do_vec_ADDP): Copy source registers before starting to update
272 destination register.
273 (do_vec_FADDP): Likewise.
274 (do_vec_load_store): Fix computation of sizeof_operation.
275 (rbit64): Fix type of constant.
276 (aarch64_step): When displaying insn value, display all 32 bits.
278 2016-01-10 Mike Frysinger <vapier@gentoo.org>
280 * config.in, configure: Regenerate.
282 2016-01-10 Mike Frysinger <vapier@gentoo.org>
284 * configure: Regenerate.
286 2016-01-10 Mike Frysinger <vapier@gentoo.org>
288 * configure.ac (SIM_AC_OPTION_ENVIRONMENT): Delete call.
289 * configure: Regenerate.
291 2016-01-10 Mike Frysinger <vapier@gentoo.org>
293 * configure: Regenerate.
295 2016-01-10 Mike Frysinger <vapier@gentoo.org>
297 * configure: Regenerate.
299 2016-01-10 Mike Frysinger <vapier@gentoo.org>
301 * configure.ac (SIM_AC_OPTION_INLINE): Delete call.
302 * configure: Regenerate.
304 2016-01-10 Mike Frysinger <vapier@gentoo.org>
306 * configure: Regenerate.
308 2016-01-10 Mike Frysinger <vapier@gentoo.org>
310 * configure: Regenerate.
312 2016-01-09 Mike Frysinger <vapier@gentoo.org>
314 * config.in, configure: Regenerate.
316 2016-01-06 Mike Frysinger <vapier@gentoo.org>
318 * interp.c (sim_create_inferior): Mark argv and env const.
319 (sim_open): Mark argv const.
321 2016-01-05 Mike Frysinger <vapier@gentoo.org>
323 * interp.c: Delete dis-asm.h include.
324 (info, opbuf, op_printf, aarch64_print_insn, sim_dis_read): Delete.
325 (sim_create_inferior): Delete disassemble init logic.
326 (OPTION_DISAS, aarch64_option_handler, aarch64_options): Delete.
327 (sim_open): Delete sim_add_option_table call.
328 * memory.c (mem_error): Delete disas check.
329 * simulator.c: Delete dis-asm.h include.
331 (HALT_UNALLOC): Replace disassembly logic with TRACE_DISASM.
332 (HALT_NYI): Likewise.
333 (handle_halt): Delete disas call.
334 (aarch64_step): Replace disas logic with TRACE_DISASM.
335 * simulator.h: Delete dis-asm.h include.
336 (aarch64_print_insn): Delete.
338 2016-01-04 Mike Frysinger <vapier@gentoo.org>
340 * simulator.c (MAX, MIN): Delete.
341 (do_vec_maxv): Change MAX to max and MIN to min.
342 (do_vec_fminmaxV): Likewise.
344 2016-01-04 Tristan Gingold <gingold@adacore.com>
346 * simulator.c: Remove syscall.h include.
348 2016-01-04 Mike Frysinger <vapier@gentoo.org>
350 * configure: Regenerate.
352 2016-01-03 Mike Frysinger <vapier@gentoo.org>
354 * configure.ac (SIM_AC_OPTION_HOSTENDIAN): Delete.
355 * configure: Regenerate.
357 2016-01-02 Mike Frysinger <vapier@gentoo.org>
359 * configure: Regenerate.
361 2015-12-27 Mike Frysinger <vapier@gentoo.org>
363 * interp.c (sim_dis_read): Change private_data to application_data.
364 (sim_create_inferior): Likewise.
366 2015-12-27 Mike Frysinger <vapier@gentoo.org>
368 * Makefile.in (SIM_OBJS): Delete sim-hload.o.
370 2015-12-26 Mike Frysinger <vapier@gentoo.org>
372 * config.in, configure: Regenerate.
374 2015-12-26 Mike Frysinger <vapier@gentoo.org>
376 * interp.c (sim_create_inferior): Update comment and argv check.
378 2015-12-14 Nick Clifton <nickc@redhat.com>
380 * simulator.c (system_get): New function. Provides read
381 access to the dczid system register.
382 (do_mrs): New function - implements the MRS instruction.
383 (dexSystem): Call do_mrs for the MRS instruction. Halt on
384 unimplemented system instructions.
386 2015-11-24 Nick Clifton <nickc@redhat.com>
388 * configure.ac: New configure template.
389 * aclocal.m4: Generate.
390 * config.in: Generate.
391 * configure: Generate.
392 * cpustate.c: New file - functions for accessing AArch64 registers.
393 * cpustate.h: New header.
394 * decode.h: New header.
395 * interp.c: New file - interface between GDB and simulator.
396 * Makefile.in: New makefile template.
397 * memory.c: New file - functions for simulating aarch64 memory
399 * memory.h: New header.
400 * sim-main.h: New header.
401 * simulator.c: New file - aarch64 simulator functions.
402 * simulator.h: New header.