1 2017-02-13 Mike Frysinger <vapier@gentoo.org>
3 * armos.c: Include libiberty.h.
4 (SWIopen): Use ARRAY_SIZE.
5 * armsupp.c: Include libiberty.h.
6 (ModeToBank): Use ARRAY_SIZE.
7 * wrapper.c (sim_target_parse_command_line): Likewise.
9 2016-07-14 Nick Clifton <nickc@redhat.com>
11 * armemu.c (Multiply64): Only issue error messages about invalid
12 arguments if debugging is enabled.
13 * armos.c (ARMul_OSHandleSWI): Ignore invalid flags.
15 2016-01-10 Mike Frysinger <vapier@gentoo.org>
17 * config.in, configure: Regenerate.
19 2016-01-10 Mike Frysinger <vapier@gentoo.org>
21 * configure: Regenerate.
23 2016-01-10 Mike Frysinger <vapier@gentoo.org>
25 * configure.ac (SIM_AC_OPTION_ENVIRONMENT): Delete call.
26 * configure: Regenerate.
28 2016-01-10 Mike Frysinger <vapier@gentoo.org>
30 * configure: Regenerate.
32 2016-01-10 Mike Frysinger <vapier@gentoo.org>
34 * configure: Regenerate.
36 2016-01-10 Mike Frysinger <vapier@gentoo.org>
38 * configure.ac (SIM_AC_OPTION_INLINE): Delete call.
39 * configure: Regenerate.
41 2016-01-10 Mike Frysinger <vapier@gentoo.org>
43 * configure: Regenerate.
45 2016-01-10 Mike Frysinger <vapier@gentoo.org>
47 * configure: Regenerate.
49 2016-01-09 Mike Frysinger <vapier@gentoo.org>
51 * config.in, configure: Regenerate.
53 2016-01-06 Mike Frysinger <vapier@gentoo.org>
55 * wrapper.c (sim_create_inferior): Mark argv and env const.
56 (sim_open): Mark argv const.
58 2016-01-04 Mike Frysinger <vapier@gentoo.org>
60 * configure: Regenerate.
62 2016-01-03 Mike Frysinger <vapier@gentoo.org>
64 * wrapper.c (sim_open): Update sim_parse_args comment.
66 2016-01-03 Mike Frysinger <vapier@gentoo.org>
68 * wrapper.c (sim_target_parse_arg_array): Replace for loop with
71 2016-01-03 Mike Frysinger <vapier@gentoo.org>
73 * configure.ac (SIM_AC_OPTION_HOSTENDIAN): Delete.
74 * configure: Regenerate.
76 2016-01-02 Mike Frysinger <vapier@gentoo.org>
78 * configure: Regenerate.
79 * wrapper.c (init): Change BIG_ENDIAN to BFD_ENDIAN_BIG.
81 2015-12-30 Mike Frysinger <vapier@gentoo.org>
83 * wrapper.c (sim_store_register): Rename to ...
84 (arm_reg_store): ... this.
85 (sim_fetch_register): Rename to ...
86 (arm_reg_fetch): ... this.
87 (sim_open): Call CPU_REG_FETCH/CPU_REG_STORE.
89 2015-12-27 Mike Frysinger <vapier@gentoo.org>
91 * Makefile.in (SIM_OBJS): Delete sim-hload.o.
93 2015-12-26 Mike Frysinger <vapier@gentoo.org>
95 * config.in, configure: Regenerate.
97 2015-12-25 Mike Frysinger <vapier@gentoo.org>
99 * Makefile.in (SIM_OBJS): Delete bag.o.
100 * armdefs.h (struct ARMul_State): Delete ErrorCode.
101 (ResetPin, FIQPin, IRQPin, AbortPin, TransPin, BigEndPin, Prog32Pin,
102 Data32Pin, LateAbortPin, ARMul_OSExit, ARMul_OSLastErrorP,
103 ARMul_Debug, ARMul_OSException,rdi_log, SpinCursor, HOURGLASS,
104 HOURGLASS_RATE): Delete.
105 * armemu.c (ARMul_Emulate26): Delete ARMul_Debug call.
106 * arminit.c (ARMul_Reset): Do not set state->ErrorCode.
107 (ARMul_Abort): Delete ARMul_OSException call.
108 * armopts.h: Delete file.
109 * armos.c (isatty_, ARMul_OSExit, ARMul_OSException,
110 ARMul_OSLastErrorP, ARMul_Debug, BUFFERSIZE, UNIQUETEMPS, NOOP,
111 BINARY, READOP, WRITEOP, FIXCRLF): Delete.
112 (struct OSblock): Delete Time0, ErrorP, FileTable, FileFlags, and
114 (ARMul_OSInit): Do not set OSptr->ErrorP, OSptr->FileTable, or
116 * armrdi.c: Delete file.
117 * armvirt.c: Delete armopts.h include.
118 (ARMul_LoadInstrS): Delete HOURGLASS logic.
119 * bag.c, bag.h, communicate.c, communicate.h, dbg_conf.h, dbg_cp.h,
120 dbg_hif.h: Delete files.
121 * dbg_rdi.h (RDP_*, RDI*): Delete defines.
122 (PointHandle, ThreadHandle, Dbg_ConfigBlock, Dbg_HostosInterface,
123 Dbg_MCState, getbufferproc): Delete.
124 (rdi_*): Delete Functions.
125 (RDI_ConfigAspect, RDI_ConfigMatchType, RDI_NameList): Delete
126 (struct RDIProcVec): Delete.
127 * gdbhost.c, gdbhost.h, kid.c, main.c, parent.c: Delete files.
128 * wrapper.c (ARMul_Debug): Delete.
130 2015-12-15 Dominik Vogt <vogt@linux.vnet.ibm.com>
132 * thumbemu.c (handle_T2_insn): Fix left shift of negative value.
133 * armemu.c (handle_v6_insn): Likewise.
135 2015-11-14 Mike Frysinger <vapier@gentoo.org>
137 * wrapper.c (sim_close): Delete.
139 2015-07-14 Nick Clifton <nickc@redhat.com>
141 * armcopro.c: Remove extraneous whitespace.
142 * armdefs.h: Likewise.
143 * armfpe.h: Likewise.
144 * arminit.c: Likewise.
145 * armopts.h: Likewise.
148 * armrdi.c: Likewise.
149 * armsupp.c: Likewise.
150 * armvirt.c: Likewise.
153 * communicate.c: Likewise.
154 * communicate.h: Likewise.
155 * dbg_conf.h: Likewise.
156 * dbg_cp.h: Likewise.
157 * dbg_hif.h: Likewise.
158 * dbg_rdi.h: Likewise.
159 * gdbhost.c: Likewise.
160 * gdbhost.h: Likewise.
161 * iwmmxt.c: Likewise.
162 * iwmmxt.h: Likewise.
165 * maverick.c: Likewise.
166 * parent.c: Likewise.
167 * thumbemu.c: Likewise.
168 * wrapper.c: Likewise.
170 2015-07-02 Nick Clifton <nickc@redhat.com>
172 * Makefile.in (SIM_EXTRA_CFLAGS): Revert previous delta.
173 (SIM_EXTRA_LIBS): Add -lm.
175 2015-06-28 Nick Clifton <nickc@redhat.com>
177 * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm.
178 * armdefs.h (ARMdval, ARMfval): New types.
179 (ARM_VFP_reg): New union.
180 (struct ARMul_State): Add VFP_Reg and FPSCR fields.
181 (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor
182 macros for the new VFP_Reg field.
183 * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT,
184 QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8,
185 USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX
187 (handle_VFP_move): New function.
188 (ARMul_Emulate16): Add checks for newly supported v6
189 instructions. Add support for VMRS, VMOV and MRC instructions.
190 (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when
191 operating in v6 mode.
192 * armemu.h (t_resolved): Define.
193 * armsupp.c: Include math.h.
194 (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH,
195 VSTM, VLDM and VPOP instructions.
196 (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the
197 new handle_VFP_xfer function.
198 (ARMul_STC): Likewise.
199 (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS,
200 VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP,
201 VCMPE and VCVT instructions.
202 (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the
203 new handle_VFP_op function.
204 * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros.
205 (test_cond): New function. Tests a condition and returns non-zero
206 if the condition has been met.
207 (handle_IT_block): New function.
208 (in_IT_block): New function.
209 (IT_block_allow): New function.
210 (ThumbExpandImm): New function.
211 (handle_T2_insn): New function. Handles T2 thumb instructions.
212 (handle_v6_thumb_insn): Add next_instr and pc parameters.
213 (ARMul_ThumbDecode): Add support for IT blocks. Add support for
215 * wrapper.c (sim_create_inferior): Detect a thumb address and call
218 2015-06-23 Mike Frysinger <vapier@gentoo.org>
220 * configure: Regenerate.
222 2015-06-23 Mike Frysinger <vapier@gentoo.org>
224 * armdefs.h: Always include stdint.h.
226 [!HAVE_STDINT_H]: Delete.
227 * dbg_hif.h [!__STDC__]: Delete.
229 2015-06-12 Mike Frysinger <vapier@gentoo.org>
231 * configure: Regenerate.
233 2015-06-12 Mike Frysinger <vapier@gentoo.org>
235 * configure: Regenerate.
237 2015-04-18 Mike Frysinger <vapier@gentoo.org>
239 * sim-main.h (SIM_CPU): Delete.
241 2015-04-18 Mike Frysinger <vapier@gentoo.org>
243 * sim-main.h (sim_cia): Delete.
245 2015-04-17 Mike Frysinger <vapier@gentoo.org>
247 * sim-main.h (CIA_GET, CIA_SET): Delete.
249 2015-04-17 Mike Frysinger <vapier@gentoo.org>
251 * wrapper.c (arm_pc_get, arm_pc_set): New functions.
252 (sim_open): Declare new local var i. Call CPU_PC_FETCH &
253 CPU_PC_STORE for all cpus.
255 2015-04-15 Mike Frysinger <vapier@gentoo.org>
257 * Makefile.in (SIM_OBJS): Delete sim-cpu.o.
258 * sim-main.h (STATE_CPU): Delete.
260 2015-04-13 Mike Frysinger <vapier@gentoo.org>
262 * configure: Regenerate.
264 2015-04-12 Mike Frysinger <vapier@gentoo.org>
266 * Makefile.in (SIM_OBJS): Move wrapper.o to the start of the list.
268 2015-04-06 Mike Frysinger <vapier@gentoo.org>
270 * Makefile.in (SIM_OBJS): Delete sim-engine.o.
272 2015-04-01 Mike Frysinger <vapier@gentoo.org>
274 * Makefile.in (armos.o, armcopro.o, maverick.o, iwmmxt.o, arminit.o,
275 armrdi.o, armsupp.o, thumbemu.o, bag.o, wrapper.o): Delete rules.
276 * tconfig.h: Delete file.
278 2015-03-31 Mike Frysinger <vapier@gentoo.org>
280 * config.in, configure: Regenerate.
282 2015-03-30 Mike Frysinger <vapier@gentoo.org>
284 * Makefile.in (SIM_RUN_OBJS): Delete.
285 (SIM_EXTRA_CFLAGS): Delete -DSIM_TARGET_SWITCHES and
286 -DSIM_USE_DEPRECATED_RUN_FRONTEND.
287 (SIM_OBJS): Change to $(SIM_NEW_COMMON_OBJS).
288 * sim-main.h: New file.
289 * wrapper.c: Delete armdefs.h, sim-utils.h, and run-sim.h includes.
290 Add sim-main.h and sim-options.h includes.
291 (sim_callback, mem_size, trace): Add TODO comments.
292 (state): Delete static and add TODO comment.
293 (sim_kind, myname, big_endian): Delete.
294 (init): Change big_endian to CURRENT_TARGET_BYTE_ORDER check.
295 (sim_size, sim_trace, sim_info, sim_target_display_usage, sim_load,
296 sim_do_command, sim_set_callbacks, sim_complete_command): Delete.
297 (sim_target_parse_command_line): Mark static.
298 (free_state): New function.
299 (sim_open): Rewrite to use new common logic.
300 (sim_close): Delete body.
302 2015-03-30 Mike Frysinger <vapier@gentoo.org>
304 * Makefile.in (SIM_EXTRA_CFLAGS): Delete -DNEED_UI_LOOP_HOOK.
305 * interp.c [NEED_UI_LOOP_HOOK] (UI_LOOP_POLL_INTERVAL,
306 ui_loop_hook_counter, deprecated_ui_loop_hook): Delete.
307 (sim_resume) [NEED_UI_LOOP_HOOK]: Delete ui code.
309 2015-03-30 Mike Frysinger <vapier@gentoo.org>
311 * armemu.c [MODE32] (handle_v6_insn): Move definition.
312 (ARMul_Emulate26): Initialize do_int after label target.
313 * armemu.h (UNDEF_Test, UNDEF_Shift, UNDEF_MSRPC, UNDEF_MRSPC,
314 UNDEF_MULPCDest, UNDEF_MULDestEQOp1, UNDEF_LSRBPC,
315 UNDEF_LSRBaseEQOffWb, UNDEF_LSRBaseEQDestWb, UNDEF_LSRPCBaseWb,
316 UNDEF_LSRPCOffWb, UNDEF_LSMNoRegs, UNDEF_LSMPCBase,
317 UNDEF_LSMUserBankWb, UNDEF_LSMBaseInListWb, UNDEF_SWPPC,
318 UNDEF_CoProHS, UNDEF_MCRPC, UNDEF_LSCPCBaseWb,
319 UNDEF_UndefNotBounced, UNDEF_ShortInt, UNDEF_IllegalMode,
320 UNDEF_Prog32SigChange, UNDEF_Data32SigChange): Define to while(0).
321 * armsupp.c (ARMul_Align): Convert old style prototype.
322 * bag.c (addtolist, killwholelist): Mark static.
323 (BAG_newbag): Convert old style prototype.
324 * maverick.c (mv_compute_host_endianness): Delete.
325 * wrapper.c (verbosity, sim_set_verbose): Delete.
326 (init): Set state->verbose to 0.
328 2015-03-30 Mike Frysinger <vapier@gentoo.org>
330 * configure.ac: Call SIM_AC_OPTION_ENDIAN, SIM_AC_OPTION_ALIGNMENT,
331 SIM_AC_OPTION_HOSTENDIAN, SIM_AC_OPTION_ENVIRONMENT,
332 SIM_AC_OPTION_INLINE, and SIM_AC_OPTION_WARNINGS.
333 * config.in, configure: Regenerate.
335 2015-03-30 Mike Frysinger <vapier@gentoo.org>
337 * Makefile.in (COPRO): Delete.
338 (SIM_OBJS): Expand COPRO.
339 * configure.ac: Deletd stdint.h check.
341 * configure: Regenerate.
343 2015-03-16 Mike Frysinger <vapier@gentoo.org>
345 * config.in, configure: Regenerate.
346 * tconfig.in: Rename file ...
347 * tconfig.h: ... here.
349 2015-03-14 Mike Frysinger <vapier@gentoo.org>
351 * Makefile.in (SIM_EXTRA_CFLAGS): Add
352 -DSIM_USE_DEPRECATED_RUN_FRONTEND.
353 (SIM_RUN_OBJS): Set to run.o.
355 2015-03-14 Mike Frysinger <vapier@gentoo.org>
357 * configure.ac (AC_CHECK_HEADERS): Delete unistd.h.
358 * aclocal.m4, configure: Regenerate.
360 2014-08-19 Alan Modra <amodra@gmail.com>
362 * configure: Regenerate.
364 2014-08-15 Roland McGrath <mcgrathr@google.com>
366 * configure: Regenerate.
367 * config.in: Regenerate.
369 2014-03-18 Nick Clifton <nickc@redhat.com>
371 * wrapper.c: Convert function declarations to ISO C format.
372 (sim_open): Delete code for handling t,d and z command line
375 2014-03-14 Nick Clifton <nickc@redhat.com>
377 * wrapper.c (op_print): New function.
378 (sim_dis_read): New function.
379 (print_insn): New function - disassembles the given instruction.
380 (sim_trace): Note that tracing is now allowed.
381 (sim_create_inferior): Default to emulating v6.
382 Initialise the disassembler machinery.
383 (sim_target_parse_command_line): Add support for -t -d and -z
385 (sim_target_display_usage): Note existence of -d and -z options.
386 (sim_open): Parse -t -d and -z options.
387 * armemu.h: Add exports of trace, disas and trace_funcs.
388 Add prototype for print_insn.
389 * armemu.c (ARMul_Emulate26): Add tracing code.
390 Delete unused variables.
391 * thumbemu (handle_v6_thumb_insn): Delete unused variable Rd.
392 Move Rm variable into switch cases.
395 * armcopro.c (XScale_cp15_init): Add a return value.
396 (XScale_cp13_init): Likewise.
397 (XScale_cp14_init): Likewise.
398 (XScale_cp15_LDC): Delete unused function.
399 (XScale_cp15_STC): Likewise.
400 * maverick.c: Delete comment inside comment.
401 (DSPInit): Delete unused function.
402 (DSPMCR4): Fix compile time warning about missing parenthesis.
404 (DSPCDP6): Delete unused variable opcode2.
406 2014-03-14 David McQuillan <dmcq@tao-group.com>
409 * armemu.c (WriteR15Load): New function. Determines if the state
410 can be changed upon a write to R15.
411 (LoadMult): Use WriteR15Load.
412 * armemu.h (WRITEDESTB): Use WriteR15Load.
414 2014-03-10 Mike Frysinger <vapier@gentoo.org>
416 * wrapper.c (sim_do_command): Add const to cmd.
418 2014-03-05 Mike Frysinger <vapier@gentoo.org>
420 * wrapper.c (sim_load): Add const to prog.
422 2013-09-23 Alan Modra <amodra@gmail.com>
424 * configure: Regenerate.
426 2013-06-03 Mike Frysinger <vapier@gentoo.org>
428 * aclocal.m4, configure: Regenerate.
430 2013-05-07 Jayant Sonar <jayant.sonar@kpitcummins.com>
431 Kaushik Phatak <Kaushik.Phatak@kpitcummins.com>
433 * armemu.c (ARMul_Emulate32): Emulate instructions MOVW and MOVT.
435 2012-12-19 Joel Brobecker <brobecker@adacore.com>
437 * COPYING: Update to GPL version 3.
439 2012-09-03 Nick Clifton <nickc@redhat.com>
442 * armsupp.c (ARMul_MRC): Return 0 if access to the MRC instruction
445 2012-08-01 Kevin Buettner <kevinb@redhat.com>
447 * wrapper.c (libiberty.h): Include.
448 (sim_store_register, sim_fetch_register): On success, return
449 length, instead of -1.
451 2012-06-15 Joel Brobecker <brobecker@adacore.com>
453 * config.in, configure: Regenerate.
455 2012-06-13 Nick Clifton <nickc@redhat.com>
457 * wrapper.c (sim_create_inferior): Treat WMMX2 binaries as iWMMXt
460 2012-05-24 Pedro Alves <palves@redhat.com>
464 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
466 2012-05-18 Nick Clifton <nickc@redhat.com>
469 * wrapper.c: Include config.h before system header files.
471 2012-03-24 Mike Frysinger <vapier@gentoo.org>
473 * aclocal.m4, config.in, configure: Regenerate.
475 2011-12-03 Mike Frysinger <vapier@gentoo.org>
477 * aclocal.m4: New file.
478 * configure: Regenerate.
480 2011-10-17 Mike Frysinger <vapier@gentoo.org>
482 * configure.ac: Change include to common/acinclude.m4.
484 2011-10-17 Mike Frysinger <vapier@gentoo.org>
486 * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER
487 call. Replace common.m4 include with SIM_AC_COMMON.
488 * configure: Regenerate.
490 2011-07-01 Nick Clifton <nickc@redhat.com>
493 * iwmmxt.c (WCMPGT): Sign extend 32-bit values before performing a
495 (WMAC): Extend computed result before adding to result register.
496 (WRSA): Sign extend 32-bit values before shifting.
498 2011-04-16 Mike Frysinger <vapier@gentoo.org>
500 * wrapper.c (sim_complete_command): New stub function.
502 2010-05-26 Ozkan Sezer <sezeroz@gmail.com>
504 * communicate.c (MYread_char): Check error return from accept() call
505 by its equality to -1 not by it being negative.
506 (MYread_charwait): Likewise.
507 * main.c (main): Likewise for both socket() and accept() calls.
509 2010-04-14 Mike Frysinger <vapier@gentoo.org>
511 * wrapper.c (sim_write): Add const to buffer arg.
513 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
515 * configure: Regenerate.
517 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
519 * config.in: Regenerate.
520 * configure: Likewise.
522 * configure: Regenerate.
524 2008-11-24 Joel Sherrill <joel.sherrill@oarcorp.com>
526 * arminit.c, iwmmxt.c: Include <string.h> to
528 2008-07-11 Hans-Peter Nilsson <hp@axis.com>
530 * configure: Regenerate to track ../common/common.m4 changes.
533 2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
534 Daniel Jacobowitz <dan@codesourcery.com>
535 Joseph Myers <joseph@codesourcery.com>
537 * configure: Regenerate.
538 * wrapper.c (sim_target_display_usage): Add help parameter.
540 2007-02-27 Mark Mitchell <mark@codesourcery.com>
542 * armos.c (SWIflen): Do not treate file descriptor zero as
545 2007-02-15 Nick Clifton <nickc@redhat.com>
547 * armemu.c (handle_v6_insn): Fix typo in sign extension test of
548 the sext and sxtah instructions.
550 2007-02-08 Daniel Jacobowitz <dan@codesourcery.com>
552 Reported by timeless@gmail.com:
553 * wrapper.c (sim_target_parse_arg_array): Do not return void value.
555 2006-12-21 Hans-Peter Nilsson <hp@axis.com>
557 * acconfig.h: Remove.
558 * config.in: Regenerate.
560 2006-06-13 Richard Earnshaw <rearnsha@arm.com>
562 * configure: Regenerated.
564 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
566 * configure: Regenerated.
568 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
570 * configure: Regenerated.
572 2006-03-07 Paul Brook <paul@codesourcery.com>
574 * elfos.c (ARMul_OSHandleSWI): Call correct function for IsTTY.
576 2006-02-01 Shaun Jackman <sjackman@gmail.com>
578 * armos.c (ARMul_OSHandleSWI): Handle the RedBoot system
579 call meminfo. Return ENOSYS for unhandled RedBoot syscalls.
581 2005-11-23 Mark Mitchell <mark@codesourcery.com>
583 * wrapper.c (gdb/signals.h): Include it.
584 (SIGTRAP): Don't define.
586 (sim_stop_reason): Use TARGET_SIGNAL_* instead of SIG*.
588 2005-11-16 Shaun Jackman <sjackman@gmail.com>
590 * armos.c: Include limits.h
591 (unlink): Remove this macro. It is unused in this file and
592 conflicts with sim_callback->unlink.
593 (PATH_MAX): Define as 1024 if not already defined.
594 (ReadFileName): New function.
595 (SWIopen): Fix a potential buffer overflow.
596 (SWIremove): New function.
598 (ARMul_OSHandleSWI): Handle the RDP calls SWI_IsTTY,
599 SWI_Remove, and SWI_Rename, as well as the RDI calls
600 AngelSWI_Reason_IsTTY, AngelSWI_Reason_Remove, and
601 AngelSWI_Reason_Rename.
603 2005-09-19 Paul Brook <paul@codesourcery.com>
605 * armdefs.h: Define ARMsword and ARMsdword. Use stdint.h when
607 * armemu.c: Use them.
608 * armvirt.c (ARMul_MemoryInit): Use correct type for size.
609 * configure.ac: Check for stdint.h.
610 * config.in: Regenerate.
611 * configure: Regenerate.
613 2005-05-24 Nick Clifton <nickc@redhat.com>
615 * thumbemu.c (handle_v6_thumb_insn): New function.
616 (ARMul_ThumbDecode): Call handle_v6_thumb_insn() when an undefined
617 instruction binary is encountered.
619 2005-05-12 Nick Clifton <nickc@redhat.com>
621 * Update the address and phone number of the FSF organization in
622 the GPL notices in the following files:
623 COPYING, Makefile.in, armcopro.c, armdefs.h, armemu.c,
624 armemu.h, armfpe.h, arminit.c, armopts.h, armos.c, armos.h,
625 armrdi.c, armsupp.c, armvirt.c, bag.c, bag.h, communicate.c,
626 communicate.h, dbg_conf.h, dbg_cp.h, dbg_hif.h, dbg_rdi.h,
627 gdbhost.c, gdbhost.h, iwmmxt.c, iwmmxt.h, kid.c, main.c,
628 maverick.c, parent.c, thumbemu.c, wrapper.c
630 2005-04-20 Nick Clifton <nickc@redhat.com>
632 * armemu.c (handle_v6_insn): New function - emulate a few of the
633 v6 instructions - the ones now generated by GCC.
634 (ARMulEmulate32): Call handle_v6_insn when a possible v6 insn is
636 * armdefs.h (struct ARMul_State): Add new field: is_v6.
637 (ARM_v6_Prop): Define.
638 * arminit.c (ARMul_NewState): Initialise the v6 flag.
639 (ARMul_SelectProcessor): Determine if the v6 flag should be
641 * wrapper.c (sim_create_inferior): For unknown architectures,
642 default to allowing the v6 instructions.
644 2005-04-18 Nick Clifton <nickc@redhat.com>
646 * iwmmxt.c (WMAC, WMADD): Move casts from the LHS of an assignment
648 (WSLL, WSRA, WSRL, WUNPCKEH, WUNPACKEL): Use ULL suffix to
649 indicate an unsigned long long constant.
651 2005-03-23 Mark Kettenis <kettenis@gnu.org>
653 * configure: Regenerate.
655 2005-01-14 Andrew Cagney <cagney@gnu.org>
657 * configure.ac: Sinclude aclocal.m4 before common.m4. Add
658 explicit call to AC_CONFIG_HEADER.
659 * configure: Regenerate.
661 2005-01-12 Andrew Cagney <cagney@gnu.org>
663 * configure.ac: Update to use ../common/common.m4.
664 * configure: Re-generate.
666 2005-01-11 Andrew Cagney <cagney@localhost.localdomain>
668 * configure: Regenerated to track ../common/aclocal.m4 changes.
670 2005-01-07 Andrew Cagney <cagney@gnu.org>
672 * configure.ac: Rename configure.in, require autoconf 2.59.
673 * configure: Re-generate.
675 2004-12-08 Hans-Peter Nilsson <hp@axis.com>
677 * configure: Regenerate for ../common/aclocal.m4 update.
679 2004-06-28 Andrew Cagney <cagney@gnu.org>
681 * armemu.c: Rename ui_loop_hook to deprecated_ui_loop_hook.
683 2003-12-29 Mark Mitchell <mark@codesourcery.com>
685 * armos.c (fcntl.h): Do not include it.
686 (O_RDONLY): Do not define.
687 (O_WRONLY): Likewise.
689 (targ-vals.h): Include it.
690 (translate_open_mode): Use TARGET_O_* instead of O_*.
692 * Makefile.in (armos.o): Depend on targ-vals.h.
694 2003-04-13 Nick Clifton <nickc@redhat.com>
696 * armvirt.c (GetWord): Only call XScale_check_memacc if in XScale
700 2003-03-30 Nick Clifton <nickc@redhat.com>
702 * configure.in (CON_FLAGS): Remove.
703 (COPRO): Unconditionally include iwmmxt.o.
704 * configure: Regenerate.
705 * Makefile.in (CON_FLAGS): Remove.
706 * armcopro.c: Remove use of __IWMMXT__ flag.
707 * wrapper.c: Likewise.
708 * armemu.c: Likewise.
709 Add explanatory comment for suppressed code.
711 2003-03-27 Nick Clifton <nickc@redhat.com>
713 * armos.c (ARMul_OsHandleSWI): Catch SWIs for unhandled vectors.
715 2003-03-27 Nick Clifton <nickc@redhat.com>
717 * configure.in: (CON_FLAGS): Define and intialise.
718 (COPRO): Add iwmmxt.o if configuring for XScale.
719 * configure: Regenerate.
720 * Makefile.in (iwmmxt.o): Add rule to build.
722 (ALL_FLAGS): Add CON_FLAGS.
723 * armcopro.c (ARMul_CoProInit): Initialise iWMMXt coprocessors.
724 * armdefs.h (struct ARMul_State): Add 'is_iWMMXt' field.
725 (ARM_iWMMXt_Prop): Define.
726 * armemu.c (ARMul_Emulate16): Intercept iWMMXt instructions and
728 * arminit.c (ARMul_NewState): Initialise 'is_iWMMXt'.
729 (ARMul_Abort): Catch branches through uninitialised vectors.
730 * armos.c (softevtorcode): Update comment.
731 (ARMul_OsInit): Use ARMUndefinedInstrV.
732 * wrapper.c (sim_create_inferior): Handle iWMMXt processor type.
733 (sim_store_register): Handle iWMMXt registers.
734 (sim_fetch_register): Handle iWMMXt registers.
735 * iwmmxt.h: New file. Exported iWMMXt coprocessor emulator
737 * iwmmxt.c: New file: iWMMXt emulator.
739 2003-03-20 Nick Clifton <nickc@redhat.com>
741 * Contribute support for Cirrus Maverick ARM co-processor,
742 written by Aldy Hernandez <aldyh@redhat.com> and
743 Andrew Cagney <cagney@redhat.com>:
745 * maverick.c: New file: Support for Maverick floating point
747 * Makefile.in: Add maverick.o target.
748 * configure.in (COPRO): Add maverick.o.
749 * configure: Regenerate.
750 * armcopro.c (ARMul_CoProInit): Only initialise co-processors
751 available on target processor. Add code to initialse Maverick
752 co-processor support code.
753 * armdefs.h (ARMul_state): Add is_ep9312 field.
754 (ARM_ep9312_Prop): Define.
755 * armemu.h: Add prototypes for Maverick co-processor
757 * arminit.c (ARMul_SelectProcessor): Initialise the
758 co-processor support once the chip has been selected.
759 * wrapper.c: Add support for Maverick co-processor.
760 (init): Do not call ARMul_CoProInit. Delays this until the
761 chip has been selected.
763 2003-03-02 Nick Clifton <nickc@redhat.com>
765 * armos.c (SWIWrite0): Catch big-endian bug when printing
768 2003-02-27 Andrew Cagney <cagney@redhat.com>
770 * wrapper.c (sim_create_inferior, sim_open): Rename _bfd to bfd.
772 2003-01-10 Ben Elliston <bje@redhat.com>
774 * README.Cygnus: Rename from this ..
775 * README: .. to this.
777 2002-09-27 Andrew Cagney <ac131313@redhat.com>
779 * wrapper.c (sim_open): Add support for -m<mem-size>.
780 (mem_size): Reduce to 2MB.
783 2002-08-15 Nick Clifton <nickc@redhat.com>
785 * armos.c (ARMul_OSHandleSWI): Catch and ignore SWIs of -1, they
786 can be caused by an interrupted system call being resumed by GDB.
788 2002-07-05 Nick Clifton <nickc@cambridge.redhat.com>
790 * armemu.c (ARMul_Emulate32): Add more tests for valid MIA, MIAPH
791 and MIAxy instructions.
793 2002-06-21 Nick Clifton <nickc@cambridge.redhat.com>
795 * armos.h (ADP_Stopped_RunTimeError): Set correct value.
797 2002-06-16 Andrew Cagney <ac131313@redhat.com>
799 * configure: Regenerated to track ../common/aclocal.m4 changes.
801 2002-06-12 Andrew Cagney <ac131313@redhat.com>
803 * Makefile.in: Update copyright.
804 (wrapper.o): Specify dependencies.
805 * wrapper.c: Include "gdb/sim-arm.h".
806 (sim_store_register, sim_fetch_register): Rewrite using `enum
807 arm_sim_regs' and a switch.
809 2002-06-09 Andrew Cagney <cagney@redhat.com>
811 * wrapper.c: Include "gdb/callback.h" and "gdb/remote-sim.h".
812 * armos.c: Include "gdb/callback.h".
814 2002-05-29 Nick Clifton <nickc@cambridge.redhat.com>
816 * armcopro.c (XScale_check_memacc): Set the FSR and FAR registers
817 if a Data Abort is detected.
819 2002-05-27 Nick Clifton <nickc@cambridge.redhat.com>
821 * armvirt.c (GetWord): Only perform access checks if 'check'
824 * wrapper.c (sim_create_inferior): Report unknown machine
826 * thumbemu.c (ARMul_ThumbDecode, Case 31): Do not set LR to pc +
827 2, it has already been advanced.
829 2002-05-23 Nick Clifton <nickc@cambridge.redhat.com>
831 * thumbemu.c (ARMul_ThumbDecode): When decoding a BLX(1)
832 instruction do not add in the second bit of the base address -
833 this has already been accounted for.
835 2002-05-21 Nick Clifton <nickc@cambridge.redhat.com>
837 * armcopro.c (check_cp13_access): Allow access to register 1 when
839 (write_cp13_reg): Allow bit 0 of reg 1 of CRm 1 to be written to.
841 2002-05-17 Nick Clifton <nickc@cambridge.redhat.com>
843 * Makefile.in (SIM_TARGET_SWITCHES): Define.
844 * armos.c (swi_mask): Define. Initialise to supporting all
846 (ARMul_OSInit): For XScale targets, only support the ANGEL
847 SWI interface. (This is at the request if Intel).
848 (ARMul_OSHandleSWI): Examine swi_mask to see if a particular
849 SWI call should be emulated.
850 Do not fall through from AngelSWI_Reason_WriteC.
851 Propagate exit code from RedBoot Exit SWI.
852 * rdi-dgb.h (swi_mask): Prototype.
853 (SWI_MASK_DEMON, SWI_MASK_ANGEL, SWI_MASK_REDBOOT): Define.
854 * wrapper.c (sim_target_parse_command_line): New function.
855 Look for and handle --swi-support switch.
856 (sim_target_parse_arg_array): New function. Process an argv
857 array for parsing by sim_target_parse_command_line.
858 (sim_target_display_usage): New function. Describe syntax of
859 --swi-suppoort switch.
860 (sim_open): Add call to sim_target_parse_arg_array).
862 2002-05-09 Nick Clifton <nickc@cambridge.redhat.com>
864 * armos.c (ARMul_OSHandleSWI): Support the RedBoot SWI in ARM
865 mode and some of its system calls.
867 2002-03-17 Anthony Green <green@redhat.com>
869 * wrapper.c (mem_size): Increase the default target memory to 8MB.
871 2002-02-21 Keith Seitz <keiths@redhat.com>
873 * armos.c (SWIWrite0): Use generic host_callback mechanism
874 for supported OS functions "open", "close", "write", etc.
877 (SWIwrite): Likewise.
879 (ARMul_OSHandleSWI): Likewise.
881 2002-02-05 Nick Clifton <nickc@cambridge.redhat.com>
883 * wrapper.c (sim_create_inferior): Modify previous patch so that
884 it is only triggered for COFF format executables.
886 2002-02-04 Nick Clifton <nickc@cambridge.redhat.com>
888 * wrapper.c (sin_create_inferior): If a v5 architecture is
889 detected, assume it might be an XScale binary, since there is no
890 way to distinguish between the two in the COFF file format.
892 2002-01-10 Nick Clifton <nickc@cambridge.redhat.com>
894 * arminit.c (ARMul_Abort): Fix parameters passed to CPRead[13].
895 * armemu.c (ARMul_Emulate32): Fix parameters passed to CPRead[13]
897 Fix formatting. Improve layout.
898 * armemu.h: Fix formatting. Improve layout.
900 2002-01-09 Nick Clifton <nickc@cambridge.redhat.com>
902 * wrapper.c (sim_fetch_register): If fetching more than 4 bytes
903 return zeroes in the other words.
904 General formatting tidy ups.
906 2001-11-16 Ben Harris <bjh21@netbsd.org>
908 * Makefile.in (armemu32.o): Replace $< with autoconf recommended
912 2001-10-18 Nick Clifton <nickc@cambridge.redhat.com>
914 * armemu.h (CP_ACCESS_ALLOWED): New macro.
916 * armcopro.c (read_cp14_reg): Make static.
917 (write_cp14_reg): Make static.
918 (check_cp13_access): Use CP_ACCESS_ALLOWED macro.
920 * armsupp.c (ARMul_LDC): Check CP_ACCESS_ALLOWED.
921 (ARMul_STC): Check CP_ACCESS_ALLOWED.
922 (ARMul_MCR): Check CP_ACCESS_ALLOWED.
923 (ARMul_MRC): Check CP_ACCESS_ALLOWED.
924 (ARMul_CDP): Check CP_ACCESS_ALLOWED.
926 * armemu.c (MCRR): Check CP_ACCESS_ALLOWED. Test Rd and Rn not
928 (MRRC): Check CP_ACCESS_ALLOWED. Test Rd and Rn not equal to 15.
931 2001-05-11 Nick Clifton <nickc@cambridge.redhat.com>
933 * armemu.c (ARMul_Emulate32): Fix handling of XScale LDRD and STRD
934 instructions with post indexed addressing modes.
936 2001-05-08 Jens-Christian Lache <lache@tu-harburg.de>
938 * armsupp.c (ARMul_FixCPSR): Check Mode not Bank in order to
939 determine rocesor mode.
941 2001-04-18 matthew green <mrg@redhat.com>
943 * armcopro.c (write_cp15_reg): Set CHANGEMODE if endianness changes.
944 (read_cp15_reg): Make non-static.
945 (XScale_cp15_LDC): Update for write_cp15_reg() change.
946 (XScale_cp15_MCR): Likewise.
947 (XScale_cp15_write_reg): Likewise.
948 (XScale_check_memacc): New function. Check for breakpoints being
949 activated by memory accesses. Does not support the Branch Target
951 (XScale_set_fsr_far): New function. Set FSR and FAR for XScale.
952 (XScale_debug_moe): New function. Set the debug Method Of Entry,
954 (write_cp14_reg): Reset count counter if requested.
955 * armdefs.h (struct ARMul_State): New members `LastTime' and
956 `CP14R0_CCD' used for the timer/counters.
957 (ARMul_CP13_R0_FIQ, ARMul_CP13_R0_IRQ, ARMul_CP13_R8_PMUS,
958 ARMul_CP14_R0_ENABLE, ARMul_CP14_R0_CLKRST, ARMul_CP14_R0_CCD,
959 ARMul_CP14_R0_INTEN0, ARMul_CP14_R0_INTEN1, ARMul_CP14_R0_INTEN2,
960 ARMul_CP14_R0_FLAG0, ARMul_CP14_R0_FLAG1, ARMul_CP14_R0_FLAG2,
961 ARMul_CP14_R10_MOE_IB, ARMul_CP14_R10_MOE_DB, ARMul_CP14_R10_MOE_BT,
962 ARMul_CP15_R1_ENDIAN, ARMul_CP15_R1_ALIGN, ARMul_CP15_R5_X,
963 ARMul_CP15_R5_ST_ALIGN, ARMul_CP15_R5_IMPRE, ARMul_CP15_R5_MMU_EXCPT,
964 ARMul_CP15_DBCON_M, ARMul_CP15_DBCON_E1, ARMul_CP15_DBCON_E0): New
965 defines for XScale registers.
966 (XScale_check_memacc, XScale_set_fsr_far, XScale_debug_moe): Prototype.
967 (ARMul_Emulate32, ARMul_Emulate26): Clean up function definition.
968 (ARMul_Emulate32): Handle the clock counter and hardware instruction
969 breakpoints. Call XScale_set_fsr_far() for software breakpoints and
971 (LoadMult): Call XScale_set_fsr_far() for data aborts.
972 (LoadSMult): Likewise.
973 (StoreMult): Likewise.
974 (StoreSMult): Likewise.
975 * armemu.h (write_cp15_reg): Update prototype.
976 * arminit.c (ARMul_NewState): Initialise CP14R0_CCD and LastTime.
977 (ARMul_Abort): If XScale, check for FIQ and IRQ being enabled in CP13
979 * armvirt.c (GetWord): Call XScale_check_memacc().
982 2001-03-20 Nick Clifton <nickc@redhat.com>
984 * armvirt.c (ARMul_ReLoadInstr): Do not enable alignment checking
985 when loading unaligned thumb instructions.
987 2001-03-06 Nick Clifton <nickc@redhat.com>
989 * thumbemu.c (ARMul_ThumbDecode): Delete label bo_blx2.
990 Compute destination address of BLX(1) instruction by
991 taking bit 1 from PC and not from bit 0 of the offset.
993 2001-02-27 Nick Clifton <nickc@redhat.com>
995 * armvirt.c (GetWord): Add new parameter - check - to enable or
996 disable the alignment checking.
997 (PutWord): Add new parameter - check - to enable or disable the
999 (ARMul_ReLoadInstr): Pass extra parameter to GetWord.
1000 (ARMul_ReadWord): Pass extra parameter to GetWord.
1001 (ARMul_WriteWord): Pass extra parameter to PutWord.
1002 (ARMul_StoreHalfWord): Pass extra parameter to PutWord.
1003 (ARMul_WriteByte): Pass extra parameter to GetWord.
1004 (ARMul_SwapWord): Pass extra parameter to PutWord.
1005 (ARMul_SafeReadByte): New Function: Read a byte but do not abort.
1006 (ARMul_SafeWriteByte): New Function: Write a byte but do not abort.
1008 * armdefs.h: Add prototypes for ARMul_SafeReadByte and
1009 ARMul_SafeWriteByte.
1011 * wrapper.c (sim_write): Use ARMul_SafeWriteByte.
1012 (sim_read): Use ARMul_SafeReadByte.
1014 * armos.c (in_SWI_handler): Remove.
1015 (SWIWrite0): Use ARMul_SafeReadByte.
1016 (WriteCommandLineTo): Use ARMul_SafeWriteByte.
1017 (SWIopen): Use ARMul_SafeReadByte.
1018 (SWIread): Use ARMul_SafeWriteByte.
1019 (SWIwrite): Use ARMul_SafeReadByte.
1020 (ARMul_OSHandleSWI): Remove use of is_SWI_handler.
1021 (ARMul_OSException): Remove use of is_SWI_handler.
1023 2001-02-16 Nick Clifton <nickc@redhat.com>
1025 * armemu.c: Remove Prefetch abort for breakpoints. Instead set
1026 the state to RESUME.
1028 2001-02-14 Nick Clifton <nickc@redhat.com>
1030 * armemu.c: Add code to preserve processor mode when a prefetch
1031 abort is signalled after processing a breakpoint.
1033 * wrapper.c (sim_create_inferior): Reset processor into ARM mode
1034 for any machine type except the early ARMs.
1036 2001-02-13 Nick Clifton <nickc@redhat.com>
1038 * armos.c (in_SWI_handler): New static variable.
1039 (ARMul_OSHandleSWI): Set in_SWI_handler whilst emulating a SWI.
1040 (ARMul_OSException): Ignore exceptions generated whilst emulating
1043 2001-02-12 Nick Clifton <nickc@redhat.com>
1045 * armemu.h (NEGBRANCH): Fix defintion.
1047 2001-02-01 Nick Clifton <nickc@redhat.com>
1049 * armemu.c (LoadSMult): Update base address register after
1050 restoring register bank.
1051 (StoreMult): Update base address register after restoring register
1054 2001-01-31 Nick Clifton <nickc@redhat.com>
1056 * armvirt.c (PutWord): Detect installation of SWI vector.
1057 (SWI_vector_installed): Define.
1058 * armos.c (ARMul_OsInit): Reset SWI_vector_installed.
1059 * armos.h (SWI_vector_installed): Declare.
1060 * wrapper.c (SWI_vector_installed): Remove definition.
1061 (sim_write): Remove check of SWI vector installation
1063 2000-12-18 Nick Clifton <nickc@redhat.com>
1065 * armemu.c (ARMul_Emulate26): Fix test for StoreDouble
1068 2000-12-10 Nick Clifton <nickc@redhat.com>
1070 * armos.c (ARMul_OSHandleSWI): Add 0x91 as an FPE SWI.
1072 2000-12-07 Nick Clifton <nickc@redhat.com>
1074 * armemu.c (ARMul_Emulate26): Detect double word load and
1075 store instructions and call emulation routines.
1076 (Handle_Load_Double): Emulate a double word load instruction.
1077 (Handle_Store_Double): Emulate a double word store
1080 2000-12-03 Nick Clifton <nickc@redhat.com>
1082 * armos.c: Fix formatting.
1083 (ARMul_OSHandleSWI): Suppress support of DEMON SWIs when in xscale
1086 2000-11-29 Nick Clifton <nickc@redhat.com>
1088 * armdefs.h (State): Add 'v5e' and 'xscale' fields.
1089 (ARM_v5e_Prop): Define.
1090 (ARM_XScale_Prop): Define.
1092 * wrapper.c (sim_create_inferior): Select processor based on
1094 (SWI_vector_installed): New boolean. Set to true if the SWI
1095 vector address is written to by the executable.
1097 * arminit.c (ARMul_NewState): Switch default to 32 bit mode.
1098 (ARMul_SelectProcessor): Initialise v5e and xscale signals.
1099 (ARMul_Abort): Fix calculation of LR address.
1101 * armos.c (ARMul_OSHandleSWI): If a SWI vector has been installed
1102 and a SWI is not handled by the simulator, pass the SWI off to the
1103 vector, otherwise issue a warning message and continue.
1105 * armsupp.c (ARMul_CPSRAltered): Set S bit aswell.
1107 * thumbemu.c: Add v5 instruction simulation.
1108 * armemu.c: Add v5, XScale and El Segundo instruction simulation.
1110 * armcopro.c: Add XScale co-processor emulation.
1111 * armemu.h: Add exported XScale co-processor functions.
1113 2000-09-15 Nick Clifton <nickc@redhat.com>
1115 * armdefs.h: Rename StrongARM property to v4_ARM and add v5 ARM
1116 property. Delete unnecessary processor names.
1117 (ARM_Strong_Prop): Delete.
1118 (STRONGARM): Delete.
1121 (State): Delete is_StrongARM boolean. Add is_v4 and is_v5
1124 * armemu.h (BUSUSEDINCPCS): Use is_v4 boolean.
1125 (BUSUSEDINCPCN): Use is_v4 boolean.
1127 * arminit.c (ARMul_NewState): Initialise is_v4 and is_v5 fields.
1128 (ARMul_SelectProcessor): Change second parameter from 'processor'
1129 to 'properties'. Set is_v4 and is_v5 booleans in State.
1131 * armrdi.c: Remove use of ARM processor names. Replace with ARM
1132 processor properties.
1134 * wrapper.c (sim_create_inferior): Choose properties passed to
1135 ARMul_SelectProcessor based on machine number.
1137 2000-08-14 Nick Clifton <nickc@redhat.com>
1139 * armemu.c (LHPOSTDOWN): Compute write back value before
1140 performing load in case the offset register is overwritten.
1143 2000-07-14 Fernando Nasser <fnasser@cygnus.com>
1145 * wrapper.c (sim_create_inferior): Fix typo in the previous patch.
1147 2000-07-14 Fernando Nasser <fnasser@cygnus.com>
1149 * wrapper.c (sim_create_inferior): Reset mode to ARM when creating a
1152 2000-07-04 Alexandre Oliva <aoliva@redhat.com>
1154 * armvirt.c (ABORTS): Do not define.
1156 * armdefs.h (struct ARMul_State): Add is_StrongARM.
1157 (ARM_Strong_Prop, STRONGARM): Define.
1158 * arminit.c (ARMul_NewState): Reset is_StrongARM.
1159 (ARMul_SelectProcessor): Set is_StrongARM.
1160 * wrapper.c (sim_create_inferior): Use bfd machine type to
1161 determine processor type to emulate.
1162 * armemu.h (BUSUSEDINCPCS, BUSUSEDINCPCN): Don't increment PC
1163 when emulating StrongARM.
1165 * armemu.c (ARMul_Emulate, t_undefined): Proceed to next insn.
1167 * armemu.h (INSN_SIZE): New macro.
1168 (SET_ABORT): Save CPSR in SPSR and set LR.
1169 * armemu.c (ARMul_Emulate, isize): Set to INSN_SIZE.
1170 (WriteR15, WriteSR15): Do not discard bit 1 in Thumb mode.
1171 * arminit.c (ARMul_Abort): Use new SETABORT and INSN_SIZE.
1173 * armemu.c (LoadSMult): Use WriteR15() to discard the least
1174 significant bits of PC.
1176 * armemu.h (WRITEDESTB): New macro.
1177 * armemu.c (ARMul_Emulate26, bl): Use WriteR15Branch() to
1178 modify PC. Moved the existing logic...
1179 (WriteR15Branch): ... here. New function.
1180 (WriteR15, WriteSR15): Drop the two least significant bits.
1181 (LoadSMult): Use WriteR15Branch() to modify PC.
1182 (LoadMult): Use WRITEDESTB() instead of WRITEDEST().
1184 * armemu.h (GETSPSR): Call ARMul_GetSPSR().
1185 * armsupp.c (ARMul_CPSRAltered): Zero out bits as they're
1186 extracted from state->Cpsr, but preserve the unused bits.
1187 (ARMul_GetCPSR): Get bits preserved in state->Cpsr.
1188 (ARMul_GetSPSR, ARMul_FixCPSR): Use ARMul_GetCPSR() to
1189 get the full CPSR word.
1191 * armemu.h (PSR_FBITS, PSR_SBITS, PSR_XBITS, PSR_CBITS): New.
1192 (SETPSR_F, SETPSR_S, SETPSR_X, SETPSR_C): New macros.
1193 (SETPSR, SET_INTMODE, SETCC): Removed.
1194 * armsupp.c (ARMul_FixCPSR, ARMul_FixSPSR): Do not test bit
1195 mask. Use SETPSR_* to modify PSR.
1196 (ARMul_SetCPSR): Load all bits from value.
1197 * armemu.c (ARMul_Emulate, msr): Do not test bit mask.
1199 * armemu.c (ARMul_Emulate): Compute writeback value before
1200 loading, since the offset register may be the destination
1203 * armdefs.h (SYSTEMBANK): Define as USERBANK.
1204 * armsupp.c (ARMul_SwitchMode): Remove SYSTEMBANK cases.
1206 2000-06-22 Alexandre Oliva <aoliva@cygnus.com>
1208 * armemu.c (Multiply64): Fix computation of flag N.
1210 * armemu.c (MultiplyAdd64): Fix computation of flag N.
1212 2000-06-20 Alexandre Oliva <aoliva@cygnus.com>
1214 * armemu.h (NEGBRANCH): Do not overwrite the two most significant
1217 2000-05-25 Nick Clifton <nickc@cygnus.com>
1219 * armcopro.c (MMUMCR): Only indicate mode change if a singal has
1221 (MMUWrite): Only indicate mode change if a singal has really
1224 * armdefs.h (SYSTEMMODE): Define.
1225 (BANK_CAN_ACEESS_SPSR): Define.
1227 * armemu.c (ARM_Emulate26): If the mode has changed allow the PC
1228 to advance before stopping the emulation.
1230 * arminit.c (ARMul_Reset): Ensure Mode field of State is set
1233 * armos.c (ARMul_OSInit): Create a initial stack pointer for
1236 * armsupp.c (ModeToBank): Remove unused first parameter.
1237 Add support for System Mode.
1238 (ARMul_GetSPSR): Use BANK_CAN_ACCESS_SPSR macro.
1239 (ARMul_SetSPSR): Use BANK_CAN_ACCESS_SPSR macro.
1240 (ARMul_FixSPSR): Use BANK_CAN_ACCESS_SPSR macro.
1241 (ARMulSwitchMode): Add support for System Mode.
1243 Wed May 24 14:40:34 2000 Andrew Cagney <cagney@b1.cygnus.com>
1245 * configure: Regenerated to track ../common/aclocal.m4 changes.
1247 2000-05-23 Nick Clifton <nickc@cygnus.com>
1249 * wrapper.c (sim_store_register): Special handling for CPSR
1252 2000-03-11 Philip Blundell <philb@gnu.org>
1254 * armemu.c (LoadSMult, LoadMult): Correct handling of aborts.
1255 Patch from Allan Skillman <Allan.Skillman@arm.com>.
1257 Wed Mar 22 15:24:21 2000 glen mccready <gkm@pobox.com>
1259 * wrapper.c (sim_open,sim_close): Copy into myname, free myname.
1261 2000-02-08 Nick Clifton <nickc@cygnus.com>
1263 * wrapper.c: Fix compile time warning messages.
1264 * armcopro.c: Fix compile time warning messages.
1265 * armdefs.h: Fix compile time warning messages.
1266 * armemu.c: Fix compile time warning messages.
1267 * armemu.h: Fix compile time warning messages.
1268 * armos.c: Fix compile time warning messages.
1269 * armsupp.c: Fix compile time warning messages.
1270 * armvirt.c: Fix compile time warning messages.
1271 * bag.c: Fix compile time warning messages.
1273 2000-02-02 Bernd Schmidt <bernds@cygnus.co.uk>
1275 * *.[ch]: Use indent to make readable.
1277 1999-11-22 Nick Clifton <nickc@cygnus.com>
1279 * armos.c (SWIread): Generate an error message if a huge read is
1281 (SWIwrite): Generate an error message if a huge write is
1284 1999-10-27 Nick Clifton <nickc@cygnus.com>
1286 * thumbemu.c (ARMul_ThumbDecode): Accept 0xbebe as a thumb
1289 1999-10-08 Ulrich Drepper <drepper@cygnus.com>
1291 * armos.c (SWIopen): Always pass third parameter with 0666 since
1292 otherwise uninitialized memory gets access if the O_CREAT bit is
1293 set and so we possibly cannot access the file afterwards.
1295 1999-09-29 Doug Evans <devans@casey.cygnus.com>
1297 * armos.c (SWIWrite0): Send output to stdout instead of stderr.
1298 (ARMul_OSHandleSWI, case SWI_WriteC,AngelSWI_Reason_WriteC): Ditto.
1300 Thu Sep 2 18:15:53 1999 Andrew Cagney <cagney@b1.cygnus.com>
1302 * configure: Regenerated to track ../common/aclocal.m4 changes.
1304 1999-05-08 Felix Lee <flee@cygnus.com>
1306 * configure: Regenerated to track ../common/aclocal.m4 changes.
1308 1999-04-06 Keith Seitz <keiths@cygnus.com>
1310 * wrapper.c (stop_simulator): New global.
1311 (sim_stop): Set sim state to STOP and set
1313 (sim_resume): Reset stop_simulator.
1314 (sim_stop_reason): If stop_simulator is set, tell gdb
1315 that the we took SIGINT.
1316 * armemu.c (ARMul_Emulate26): Don't loop forever. Stop if
1317 stop_simulator is set.
1319 1999-04-02 Keith Seitz <keiths@cygnus.com>
1321 * armemu.c (ARMul_Emulate26): If NEED_UI_LOOP_HOOK, call ui_loop_hook
1322 whenever the counter expires.
1323 * Makefile.in (SIM_EXTRA_CFLAGS): Include define NEED_UI_LOOP_HOOK.
1325 1999-03-24 Nick Clifton <nickc@cygnus.com>
1327 * armemu.c (ARMul_Emulate26): Handle new breakpoint value.
1328 * thumbemu.c (ARMul_ThumbDecode): Handle new breakpoint value.
1330 Mon Sep 14 09:00:05 1998 Nick Clifton <nickc@cygnus.com>
1332 * wrapper.c (sim_open): Set endianness according to BFD or command
1335 * tconfig.in: Define SIM_HAVE_BIENDIAN.
1337 Thu Aug 27 11:00:05 1998 Nick Clifton <nickc@cygnus.com>
1339 * armemu.c (Multiply64): Test for Rm (rather than Rs) not being
1340 the same as either RdHi or RdLo.
1342 Thu Jul 2 10:24:35 1998 Nick Clifton <nickc@cygnus.com>
1344 * armos.c (ARMul_OSHandleSWI: AngelSWI_Reason_ReportException):
1345 Set Reg[0] based on reason for for the exception.
1347 Thu Jun 4 15:22:03 1998 Jason Molenda (crash@bugshack.cygnus.com)
1349 * armos.c (SWIwrite0): New function.
1350 (WriteCommandLineTo): New function.
1351 (SWIopen): New function.
1352 (SWIread): New function.
1353 (SWIwrite): New function.
1354 (SWIflen): New function.
1355 (ARMul_OSHandleSWI): Call new functions instead of handling
1357 (ARMul_OSHandleSWI): Handle Angel SWIs correctly.
1358 (*): Reformat spacing to be a bit more GNUly.
1359 Most code taken from a patch by Anthony Thompson
1360 (athompso@cambridge.arm.com)
1362 Tue Jun 2 15:22:22 1998 Nick Clifton <nickc@cygnus.com>
1364 * armos.h: Add Angel SWI and its reason codes.
1365 * armos.c (ARMul_OSHandleSWI): Ignore Angel SWIs (for now).
1367 Mon Jun 1 17:14:19 1998 Anthony Thompson (athompso@cambridge.arm.com)
1369 * armos.c (ARMul_OSHandleSWI::SWI_Open): Handle special case
1370 of ":tt" to catch stdin in addition to stdout.
1371 (ARMul_OSHandleSWI::SWI_Seek): Return 0 or 1 to indicate failure
1372 or success of lseek().
1374 Wed May 20 17:36:25 1998 Nick Clifton <nickc@cygnus.com>
1376 * armos.c (ARMul_OSHandleSWI): Special case code to catch attempts
1379 Wed Apr 29 15:29:55 1998 Jeff Johnston <jjohnstn@cygnus.com>
1381 * armos.c (ARMul_OSHandleSWI): Added code for SWI_Clock,
1382 SWI_Flen, and SWI_Time. Also fixed SWI_Seek code to only
1383 seek from offset 0 and not to use R2 for whence since it is
1384 not passed as part of the SWI call.
1386 Tue Apr 28 18:33:31 1998 Geoffrey Noer <noer@cygnus.com>
1388 * configure: Regenerated to track ../common/aclocal.m4 changes.
1390 Sun Apr 26 15:31:55 1998 Tom Tromey <tromey@creche>
1392 * configure: Regenerated to track ../common/aclocal.m4 changes.
1395 Sun Apr 26 15:20:26 1998 Tom Tromey <tromey@cygnus.com>
1397 * acconfig.h: New file.
1398 * configure.in: Reverted change of Apr 24; use sinclude again.
1400 Fri Apr 24 14:16:40 1998 Tom Tromey <tromey@creche>
1402 * configure: Regenerated to track ../common/aclocal.m4 changes.
1405 Fri Apr 24 11:20:19 1998 Tom Tromey <tromey@cygnus.com>
1407 * configure.in: Don't call sinclude.
1409 Sat Apr 4 20:36:25 1998 Andrew Cagney <cagney@b1.cygnus.com>
1411 * configure: Regenerated to track ../common/aclocal.m4 changes.
1413 Fri Mar 27 16:15:52 1998 Andrew Cagney <cagney@b1.cygnus.com>
1415 * configure: Regenerated to track ../common/aclocal.m4 changes.
1417 Wed Mar 25 12:35:29 1998 Andrew Cagney <cagney@b1.cygnus.com>
1419 * configure: Regenerated to track ../common/aclocal.m4 changes.
1421 Wed Mar 18 12:38:12 1998 Andrew Cagney <cagney@b1.cygnus.com>
1423 * configure: Regenerated to track ../common/aclocal.m4 changes.
1425 Tue Mar 10 09:26:38 1998 Nick Clifton <nickc@cygnus.com>
1427 * armopts.h: Remove definition of LITTLEND - it is not used.
1429 Tue Feb 17 12:35:54 1998 Andrew Cagney <cagney@b1.cygnus.com>
1431 * wrapper.c (sim_store_register, sim_fetch_register): Pass in
1432 length parameter. Return -1.
1434 Sun Feb 1 16:47:51 1998 Andrew Cagney <cagney@b1.cygnus.com>
1436 * configure: Regenerated to track ../common/aclocal.m4 changes.
1438 Sat Jan 31 18:15:41 1998 Andrew Cagney <cagney@b1.cygnus.com>
1440 * configure: Regenerated to track ../common/aclocal.m4 changes.
1442 Mon Jan 19 22:26:29 1998 Doug Evans <devans@seba>
1444 * configure: Regenerated to track ../common/aclocal.m4 changes.
1446 Mon Dec 15 23:17:11 1997 Andrew Cagney <cagney@b1.cygnus.com>
1448 * configure: Regenerated to track ../common/aclocal.m4 changes.
1451 Tue Dec 9 11:30:48 1997 Nick Clifton <nickc@cygnus.com>
1453 * Makefile.in: Updated with changes from branch.
1455 * armemu.c: ditto these changes
1456 * armemu.h: ditto add support for
1457 * armos.c: ditto the Thumb instruction
1458 * armsupp.c: ditto set and the new v4
1459 * armvirt.c: ditto architecture.
1461 * thumbemu.c: New file from branch.
1464 Thu Dec 4 09:21:05 1997 Doug Evans <devans@canuck.cygnus.com>
1466 * configure: Regenerated to track ../common/aclocal.m4 changes.
1468 Thu Oct 30 13:54:06 1997 Nick Clifton <nickc@cygnus.com>
1470 * armos.c (ARMul_OSHandleSWI): Add support for GetEnv SWI. Patch
1471 from Tony Thompson at ARM: athompso@arm.com
1473 * wrapper.c (sim_create_inferior): Add code to create an execution
1474 environment. Patch from Tony Thompson at ARM: athompso@arm.com
1476 Wed Oct 22 14:43:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
1478 * wrapper.c (sim_load): Pass lma_p and sim_write args to
1481 Fri Oct 3 09:28:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
1483 * configure: Regenerated to track ../common/aclocal.m4 changes.
1485 Wed Sep 24 17:38:57 1997 Andrew Cagney <cagney@b1.cygnus.com>
1487 * configure: Regenerated to track ../common/aclocal.m4 changes.
1489 Tue Sep 23 11:04:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
1491 * configure: Regenerated to track ../common/aclocal.m4 changes.
1493 Mon Sep 22 11:46:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
1495 * configure: Regenerated to track ../common/aclocal.m4 changes.
1497 Fri Sep 19 17:45:25 1997 Andrew Cagney <cagney@b1.cygnus.com>
1499 * configure: Regenerated to track ../common/aclocal.m4 changes.
1501 Mon Sep 15 17:36:15 1997 Andrew Cagney <cagney@b1.cygnus.com>
1503 * configure: Regenerated to track ../common/aclocal.m4 changes.
1505 Thu Sep 4 17:21:23 1997 Doug Evans <dje@seba>
1507 * configure: Regenerated to track ../common/aclocal.m4 changes.
1509 Wed Aug 27 18:13:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
1511 * configure: Regenerated to track ../common/aclocal.m4 changes.
1514 Tue Aug 26 10:37:27 1997 Andrew Cagney <cagney@b1.cygnus.com>
1516 * wrapper.c (sim_kill): Delete.
1517 (sim_create_inferior): Add ABFD argument.
1518 (sim_load): Move setting of PC from here.
1519 (sim_create_inferior): To here.
1521 Mon Aug 25 17:50:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
1523 * configure: Regenerated to track ../common/aclocal.m4 changes.
1526 Mon Aug 25 15:35:45 1997 Andrew Cagney <cagney@b1.cygnus.com>
1528 * wrapper.c (sim_open): Add ABFD argument.
1530 Tue May 20 10:13:26 1997 Andrew Cagney <cagney@b1.cygnus.com>
1532 * wrapper.c (sim_open): Add callback argument.
1533 (sim_set_callbacks): Drop SIM_DESC argument.
1535 Thu Apr 24 00:39:51 1997 Doug Evans <dje@canuck.cygnus.com>
1537 * configure: Regenerated to track ../common/aclocal.m4 changes.
1539 Fri Apr 18 13:32:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
1541 * wrapper.c (sim_stop): Stub sim_stop function.
1543 Thu Apr 17 18:33:01 1997 Fred Fish <fnf@cygnus.com>
1545 * arminit.c (ARMul_NewState): Preinitialize the state to
1548 Thu Apr 17 02:39:02 1997 Doug Evans <dje@canuck.cygnus.com>
1550 * Makefile.in (SIM_OBJS): Add sim-load.o.
1551 * wrapper.c (sim_kind,myname): New static locals.
1552 (sim_open): Set sim_kind, myname.
1553 (sim_load): Call sim_load_file to do work. Set start address from bfd.
1554 (sim_create_inferior): Return SIM_RC. Delete start_address arg.
1556 Thu Apr 17 11:48:25 1997 Andrew Cagney <cagney@b1.cygnus.com>
1558 * wrapper.c (sim_trace): Update so that it matches prototype.
1560 Mon Apr 7 15:45:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1562 * configure: Regenerated to track ../common/aclocal.m4 changes.
1565 Mon Apr 7 12:01:17 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1567 * Makefile.in (armemu32.o): Replace $< with autoconf recommended
1569 (armemu26.o): Ditto.
1571 Wed Apr 2 15:06:28 1997 Doug Evans <dje@canuck.cygnus.com>
1573 * wrapper.c (sim_open): New arg `kind'.
1575 * configure: Regenerated to track ../common/aclocal.m4 changes.
1577 Wed Apr 2 14:50:44 1997 Ian Lance Taylor <ian@cygnus.com>
1579 * COPYING: Update FSF address.
1581 Wed Apr 2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1583 * configure: Regenerated to track ../common/aclocal.m4 changes.
1585 Wed Mar 19 01:14:00 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1587 * configure: Regenerated to track ../common/aclocal.m4 changes.
1589 Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1591 * configure: Re-generate.
1593 Fri Mar 14 10:34:11 1997 Michael Meissner <meissner@cygnus.com>
1595 * configure: Regenerate to track ../common/aclocal.m4 changes.
1597 Thu Mar 13 12:38:56 1997 Doug Evans <dje@canuck.cygnus.com>
1599 * wrapper.c (sim_open): Has result now.
1600 (sim_*): New SIM_DESC argument.
1602 Tue Feb 4 13:22:21 1997 Doug Evans <dje@canuck.cygnus.com>
1604 * Makefile.in (@COMMON_MAKEFILE_FRAG@): Use
1605 COMMON_{PRE,POST}_CONFIG_FRAG instead.
1606 * configure.in: sinclude ../common/aclocal.m4.
1607 * configure: Regenerated.
1609 Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com)
1611 * configure configure.in Makefile.in: Update to new configure
1612 scheme which is more compatible with WinGDB builds.
1613 * configure.in: Improve comment on how to run autoconf.
1614 * configure: Re-run autoconf to get new ../common/aclocal.m4.
1615 * Makefile.in: Use autoconf substitution to install common
1618 Wed Nov 20 01:05:10 1996 Doug Evans <dje@canuck.cygnus.com>
1620 * run.c: Deleted, use one in ../common now.
1621 * Makefile.in: Delete everything that's been moved to
1622 ../common/Make-common.in.
1624 * configure.in: Simplify using macros in ../common/aclocal.m4.
1625 * configure: Regenerated.
1626 * config.in: New file.
1627 * armos.c: #include config.h.
1628 * wrapper.c (mem_size): Value is in bytes now.
1629 (sim_callback): New global.
1630 (arm_sim_set_profile{,_size}): Delete.
1631 (arm_sim_set_mem_size): Rename to sim_size.
1632 (sim_do_command): Call printf_filtered via callback.
1633 (sim_set_callbacks): Record callback.
1635 Thu Oct 3 16:10:27 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1637 * Makefile.in (mostlyclean): Remove config.log.
1639 Wed Jun 26 12:17:24 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1641 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1642 INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1644 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1645 (AC_PROG_INSTALL): Added.
1646 * configure: Rebuilt.
1648 Wed Feb 21 12:14:31 1996 Ian Lance Taylor <ian@cygnus.com>
1650 * configure: Regenerate with autoconf 2.7.
1652 Fri Dec 15 16:27:30 1995 Ian Lance Taylor <ian@cygnus.com>
1654 * run.c (main): Use new bfd_big_endian macro.
1656 Mon Nov 20 17:40:38 1995 Doug Evans <dje@canuck.cygnus.com>
1658 * run.c: Include "getopt.h".
1660 (usage): Make static.
1661 (main): Call arm_sim_set_verbosity.
1662 Only load sections marked SEC_LOAD.
1663 * wrapper.c (mem_size, verbosity): New static global.
1664 (arm_sim_set_mem_size): Renamed from sim_size. Callers updated.
1665 (arm_sim_set_profile{,_size}): Renamed from sim_foo. Callers updated.
1667 Fri Nov 17 19:35:11 1995 Doug Evans <dje@canuck.cygnus.com>
1669 * armdefs.h (ARMul_State): New member `verbose'.
1670 * armrdi.c (ARMul_ConsolePrint): Add missing va_end.
1671 * run.c (verbose): Make global.
1672 * wrapper.c (init): Set state->verbose.
1673 (ARMul_ConsolePrint): Don't print anything if !verbose.
1675 Fri Oct 13 15:30:30 1995 Doug Evans <dje@canuck.cygnus.com>
1677 * armos.c: #include dbg_rdi.h.
1678 (ARMul_OSHandleSWI): Handle SWI_Breakpoint.
1679 * armos.h (SWI_Breakpoint): Define.
1680 * wrapper.c: #include armemu.h, dbg_rdi.h.
1682 (sim_resume): Use state->EndCondition to record stop state.
1683 Call FLUSHPIPE before returning.
1684 (sim_stop_reason): Determine reason from state->EndCondition.
1686 Fri Oct 13 15:04:05 1995 steve chamberlain <sac@slash.cygnus.com>
1688 * wrapper.c (sim_set_callbacks): New.
1690 Thu Sep 28 19:45:56 1995 Doug Evans <dje@deneb.cygnus.com>
1692 * armos.c (ARMul_OSHandleSWI): Result of read/write calls is
1693 number of bytes not read/written (or -1).
1695 Wed Sep 20 13:35:54 1995 Ian Lance Taylor <ian@cygnus.com>
1697 * Makefile.in (maintainer-clean): New synonym for realclean.
1699 Fri Sep 8 14:27:20 1995 Ian Lance Taylor <ian@cygnus.com>
1701 * configure.in: Remove AC_PROG_INSTALL.
1702 * configure: Rebuild.
1703 * Makefile.in (INSTALL): Revert to using install.sh.
1704 (INSTALL_PROGRAM, INSTALL_DATA): Set to $(INSTALL).
1705 (INSTALL_XFORM, INSTALL_XFORM1): Restore.
1706 (mostlyclean): Make the same as clean, not distclean.
1707 (clean): Remove config.log.
1708 (install): Don't install in $(tooldir).
1710 Thu Sep 7 12:00:17 1995 Doug Evans <dje@canuck.cygnus.com>
1712 (Try to) Update to new bfd autoconf scheme.
1713 * run.c: Don't include sysdep.h.
1714 * Makefile.in (INSTALL{,_PROGRAM,_DATA}): Use autoconf computed value.
1715 (CC, CFLAGS, AR, RANLIB): Likewise.
1716 (HDEFINES, TDEFINES): Define.
1717 (CC_FOR_BUILD): Delete.
1718 (host_makefile_frag): Delete.
1719 (Makefile): Don't depend on frags.
1720 * configure.in (sysdep.h): Don't create symlink.
1721 (host_makefile_frag, frags): Deleted.
1722 (CC, CFLAGS, AR, RANLIB, INSTALL): Compute values.
1723 * configure: Regenerated.
1725 Thu Aug 3 10:45:37 1995 Fred Fish <fnf@cygnus.com>
1727 * Update all FSF addresses except those in COPYING* files.
1729 Wed Jul 5 16:15:54 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1731 * Makefile.in (clean): Remove run, libsim.a.
1733 * Makefile.in, configure.in: converted to autoconf.
1734 * configure: New file, generated with autconf 2.4.
1738 Fri Jun 30 16:49:47 1995 Stan Shebs <shebs@andros.cygnus.com>
1740 * wrapper.c (sim_do_command): New function.
1742 Tue Jun 13 10:57:32 1995 Steve Chamberlain <sac@slash.cygnus.com>
1744 * armos.c (ARMul_OSHandleSWI): New version to work with
1747 Thu Jun 8 14:37:14 1995 Steve Chamberlain <sac@slash.cygnus.com>
1749 * run.c (main): Grab return value from right register.
1751 Wed May 24 14:37:31 1995 Steve Chamberlain <sac@slash.cygnus.com>