1 2021-02-21 Mike Frysinger <vapier@gentoo.org>
3 * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
4 * aclocal.m4, configure: Regenerate.
6 2021-02-13 Mike Frysinger <vapier@gentoo.org>
8 * configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
9 * aclocal.m4, configure: Regenerate.
11 2021-02-06 Mike Frysinger <vapier@gentoo.org>
13 * configure: Regenerate.
15 2021-01-11 Mike Frysinger <vapier@gentoo.org>
17 * config.in, configure: Regenerate.
19 2021-01-09 Mike Frysinger <vapier@gentoo.org>
21 * configure: Regenerate.
23 2021-01-08 Mike Frysinger <vapier@gentoo.org>
25 * configure: Regenerate.
27 2021-01-04 Mike Frysinger <vapier@gentoo.org>
29 * wrapper.c: Include stdlib.h.
31 2021-01-04 Mike Frysinger <vapier@gentoo.org>
33 * iwmmxt.c: Include stdlib.h.
35 2021-01-04 Mike Frysinger <vapier@gentoo.org>
37 * configure: Regenerate.
39 2020-12-15 Nick Clifton <nickc@redhat.com>
41 * wrapper.c (sim_create_inferior): Accept some more ARM machine numbers.
43 2020-12-15 Jens Bauer <jens@plustv.dk>
45 * armemu.c (handle_v6_insn): Add support for SDIV and UDIV.
46 * thumbemu.c (handle_T2_insn): Likewise.
48 2020-10-20 Dr. David Alan Gilbert <dgilbert@redhat.com>
50 * armos.c (SWIread): Fix printf format.
52 2020-08-13 Luis Machado <luis.machado@linaro.org>
56 * wrapper.c (sim_target_parse_command_line): Free discarded argv
58 (sim_open): Use a duplicate of argv instead of the original argv.
60 2020-01-17 Christian Biesinger <cbiesinger@google.com>
62 * iwmmxt.c: Fix spelling error (seperate).
64 2019-12-06 Luis Machado <luis.machado@linaro.org>
66 * armemu.c (isize): Move this declaration ...
67 * arminit.c (isize): ... here.
68 * maverick.h: New file.
69 * wrapper.c: Include "maverick.h".
70 (<struct maverick_regs>, <union maverick_acc_regs>): Remove and update
72 (sim_create_inferior): Cast variables to proper type.
73 * maverick.c: Include "maverick.h".
74 (<struct maverick_regs>, <union maverick_acc_regs>): Move
75 declarations to maverick.h and update comment.
76 (DSPsc, DSPacc, DSPregs): Adjust comment.
78 2018-01-02 Nick Clifton <nickc@redhat.com>
81 * maverick.c (DSPCDP4): Add missing parameter to debug print
84 2017-09-21 Yao Qi <yao.qi@linaro.org>
86 * wrapper.c (print_insn): Use disassembler instead of
87 print_insn_little_arm.
89 2017-09-06 John Baldwin <jhb@FreeBSD.org>
91 * configure: Regenerate.
93 2017-02-13 Mike Frysinger <vapier@gentoo.org>
95 * armos.c: Include libiberty.h.
96 (SWIopen): Use ARRAY_SIZE.
97 * armsupp.c: Include libiberty.h.
98 (ModeToBank): Use ARRAY_SIZE.
99 * wrapper.c (sim_target_parse_command_line): Likewise.
101 2016-07-14 Nick Clifton <nickc@redhat.com>
103 * armemu.c (Multiply64): Only issue error messages about invalid
104 arguments if debugging is enabled.
105 * armos.c (ARMul_OSHandleSWI): Ignore invalid flags.
107 2016-01-10 Mike Frysinger <vapier@gentoo.org>
109 * config.in, configure: Regenerate.
111 2016-01-10 Mike Frysinger <vapier@gentoo.org>
113 * configure: Regenerate.
115 2016-01-10 Mike Frysinger <vapier@gentoo.org>
117 * configure.ac (SIM_AC_OPTION_ENVIRONMENT): Delete call.
118 * configure: Regenerate.
120 2016-01-10 Mike Frysinger <vapier@gentoo.org>
122 * configure: Regenerate.
124 2016-01-10 Mike Frysinger <vapier@gentoo.org>
126 * configure: Regenerate.
128 2016-01-10 Mike Frysinger <vapier@gentoo.org>
130 * configure.ac (SIM_AC_OPTION_INLINE): Delete call.
131 * configure: Regenerate.
133 2016-01-10 Mike Frysinger <vapier@gentoo.org>
135 * configure: Regenerate.
137 2016-01-10 Mike Frysinger <vapier@gentoo.org>
139 * configure: Regenerate.
141 2016-01-09 Mike Frysinger <vapier@gentoo.org>
143 * config.in, configure: Regenerate.
145 2016-01-06 Mike Frysinger <vapier@gentoo.org>
147 * wrapper.c (sim_create_inferior): Mark argv and env const.
148 (sim_open): Mark argv const.
150 2016-01-04 Mike Frysinger <vapier@gentoo.org>
152 * configure: Regenerate.
154 2016-01-03 Mike Frysinger <vapier@gentoo.org>
156 * wrapper.c (sim_open): Update sim_parse_args comment.
158 2016-01-03 Mike Frysinger <vapier@gentoo.org>
160 * wrapper.c (sim_target_parse_arg_array): Replace for loop with
163 2016-01-03 Mike Frysinger <vapier@gentoo.org>
165 * configure.ac (SIM_AC_OPTION_HOSTENDIAN): Delete.
166 * configure: Regenerate.
168 2016-01-02 Mike Frysinger <vapier@gentoo.org>
170 * configure: Regenerate.
171 * wrapper.c (init): Change BIG_ENDIAN to BFD_ENDIAN_BIG.
173 2015-12-30 Mike Frysinger <vapier@gentoo.org>
175 * wrapper.c (sim_store_register): Rename to ...
176 (arm_reg_store): ... this.
177 (sim_fetch_register): Rename to ...
178 (arm_reg_fetch): ... this.
179 (sim_open): Call CPU_REG_FETCH/CPU_REG_STORE.
181 2015-12-27 Mike Frysinger <vapier@gentoo.org>
183 * Makefile.in (SIM_OBJS): Delete sim-hload.o.
185 2015-12-26 Mike Frysinger <vapier@gentoo.org>
187 * config.in, configure: Regenerate.
189 2015-12-25 Mike Frysinger <vapier@gentoo.org>
191 * Makefile.in (SIM_OBJS): Delete bag.o.
192 * armdefs.h (struct ARMul_State): Delete ErrorCode.
193 (ResetPin, FIQPin, IRQPin, AbortPin, TransPin, BigEndPin, Prog32Pin,
194 Data32Pin, LateAbortPin, ARMul_OSExit, ARMul_OSLastErrorP,
195 ARMul_Debug, ARMul_OSException,rdi_log, SpinCursor, HOURGLASS,
196 HOURGLASS_RATE): Delete.
197 * armemu.c (ARMul_Emulate26): Delete ARMul_Debug call.
198 * arminit.c (ARMul_Reset): Do not set state->ErrorCode.
199 (ARMul_Abort): Delete ARMul_OSException call.
200 * armopts.h: Delete file.
201 * armos.c (isatty_, ARMul_OSExit, ARMul_OSException,
202 ARMul_OSLastErrorP, ARMul_Debug, BUFFERSIZE, UNIQUETEMPS, NOOP,
203 BINARY, READOP, WRITEOP, FIXCRLF): Delete.
204 (struct OSblock): Delete Time0, ErrorP, FileTable, FileFlags, and
206 (ARMul_OSInit): Do not set OSptr->ErrorP, OSptr->FileTable, or
208 * armrdi.c: Delete file.
209 * armvirt.c: Delete armopts.h include.
210 (ARMul_LoadInstrS): Delete HOURGLASS logic.
211 * bag.c, bag.h, communicate.c, communicate.h, dbg_conf.h, dbg_cp.h,
212 dbg_hif.h: Delete files.
213 * dbg_rdi.h (RDP_*, RDI*): Delete defines.
214 (PointHandle, ThreadHandle, Dbg_ConfigBlock, Dbg_HostosInterface,
215 Dbg_MCState, getbufferproc): Delete.
216 (rdi_*): Delete Functions.
217 (RDI_ConfigAspect, RDI_ConfigMatchType, RDI_NameList): Delete
218 (struct RDIProcVec): Delete.
219 * gdbhost.c, gdbhost.h, kid.c, main.c, parent.c: Delete files.
220 * wrapper.c (ARMul_Debug): Delete.
222 2015-12-15 Dominik Vogt <vogt@linux.vnet.ibm.com>
224 * thumbemu.c (handle_T2_insn): Fix left shift of negative value.
225 * armemu.c (handle_v6_insn): Likewise.
227 2015-11-14 Mike Frysinger <vapier@gentoo.org>
229 * wrapper.c (sim_close): Delete.
231 2015-07-14 Nick Clifton <nickc@redhat.com>
233 * armcopro.c: Remove extraneous whitespace.
234 * armdefs.h: Likewise.
235 * armfpe.h: Likewise.
236 * arminit.c: Likewise.
237 * armopts.h: Likewise.
240 * armrdi.c: Likewise.
241 * armsupp.c: Likewise.
242 * armvirt.c: Likewise.
245 * communicate.c: Likewise.
246 * communicate.h: Likewise.
247 * dbg_conf.h: Likewise.
248 * dbg_cp.h: Likewise.
249 * dbg_hif.h: Likewise.
250 * dbg_rdi.h: Likewise.
251 * gdbhost.c: Likewise.
252 * gdbhost.h: Likewise.
253 * iwmmxt.c: Likewise.
254 * iwmmxt.h: Likewise.
257 * maverick.c: Likewise.
258 * parent.c: Likewise.
259 * thumbemu.c: Likewise.
260 * wrapper.c: Likewise.
262 2015-07-02 Nick Clifton <nickc@redhat.com>
264 * Makefile.in (SIM_EXTRA_CFLAGS): Revert previous delta.
265 (SIM_EXTRA_LIBS): Add -lm.
267 2015-06-28 Nick Clifton <nickc@redhat.com>
269 * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm.
270 * armdefs.h (ARMdval, ARMfval): New types.
271 (ARM_VFP_reg): New union.
272 (struct ARMul_State): Add VFP_Reg and FPSCR fields.
273 (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor
274 macros for the new VFP_Reg field.
275 * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT,
276 QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8,
277 USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX
279 (handle_VFP_move): New function.
280 (ARMul_Emulate16): Add checks for newly supported v6
281 instructions. Add support for VMRS, VMOV and MRC instructions.
282 (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when
283 operating in v6 mode.
284 * armemu.h (t_resolved): Define.
285 * armsupp.c: Include math.h.
286 (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH,
287 VSTM, VLDM and VPOP instructions.
288 (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the
289 new handle_VFP_xfer function.
290 (ARMul_STC): Likewise.
291 (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS,
292 VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP,
293 VCMPE and VCVT instructions.
294 (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the
295 new handle_VFP_op function.
296 * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros.
297 (test_cond): New function. Tests a condition and returns non-zero
298 if the condition has been met.
299 (handle_IT_block): New function.
300 (in_IT_block): New function.
301 (IT_block_allow): New function.
302 (ThumbExpandImm): New function.
303 (handle_T2_insn): New function. Handles T2 thumb instructions.
304 (handle_v6_thumb_insn): Add next_instr and pc parameters.
305 (ARMul_ThumbDecode): Add support for IT blocks. Add support for
307 * wrapper.c (sim_create_inferior): Detect a thumb address and call
310 2015-06-23 Mike Frysinger <vapier@gentoo.org>
312 * configure: Regenerate.
314 2015-06-23 Mike Frysinger <vapier@gentoo.org>
316 * armdefs.h: Always include stdint.h.
318 [!HAVE_STDINT_H]: Delete.
319 * dbg_hif.h [!__STDC__]: Delete.
321 2015-06-12 Mike Frysinger <vapier@gentoo.org>
323 * configure: Regenerate.
325 2015-06-12 Mike Frysinger <vapier@gentoo.org>
327 * configure: Regenerate.
329 2015-04-18 Mike Frysinger <vapier@gentoo.org>
331 * sim-main.h (SIM_CPU): Delete.
333 2015-04-18 Mike Frysinger <vapier@gentoo.org>
335 * sim-main.h (sim_cia): Delete.
337 2015-04-17 Mike Frysinger <vapier@gentoo.org>
339 * sim-main.h (CIA_GET, CIA_SET): Delete.
341 2015-04-17 Mike Frysinger <vapier@gentoo.org>
343 * wrapper.c (arm_pc_get, arm_pc_set): New functions.
344 (sim_open): Declare new local var i. Call CPU_PC_FETCH &
345 CPU_PC_STORE for all cpus.
347 2015-04-15 Mike Frysinger <vapier@gentoo.org>
349 * Makefile.in (SIM_OBJS): Delete sim-cpu.o.
350 * sim-main.h (STATE_CPU): Delete.
352 2015-04-13 Mike Frysinger <vapier@gentoo.org>
354 * configure: Regenerate.
356 2015-04-12 Mike Frysinger <vapier@gentoo.org>
358 * Makefile.in (SIM_OBJS): Move wrapper.o to the start of the list.
360 2015-04-06 Mike Frysinger <vapier@gentoo.org>
362 * Makefile.in (SIM_OBJS): Delete sim-engine.o.
364 2015-04-01 Mike Frysinger <vapier@gentoo.org>
366 * Makefile.in (armos.o, armcopro.o, maverick.o, iwmmxt.o, arminit.o,
367 armrdi.o, armsupp.o, thumbemu.o, bag.o, wrapper.o): Delete rules.
368 * tconfig.h: Delete file.
370 2015-03-31 Mike Frysinger <vapier@gentoo.org>
372 * config.in, configure: Regenerate.
374 2015-03-30 Mike Frysinger <vapier@gentoo.org>
376 * Makefile.in (SIM_RUN_OBJS): Delete.
377 (SIM_EXTRA_CFLAGS): Delete -DSIM_TARGET_SWITCHES and
378 -DSIM_USE_DEPRECATED_RUN_FRONTEND.
379 (SIM_OBJS): Change to $(SIM_NEW_COMMON_OBJS).
380 * sim-main.h: New file.
381 * wrapper.c: Delete armdefs.h, sim-utils.h, and run-sim.h includes.
382 Add sim-main.h and sim-options.h includes.
383 (sim_callback, mem_size, trace): Add TODO comments.
384 (state): Delete static and add TODO comment.
385 (sim_kind, myname, big_endian): Delete.
386 (init): Change big_endian to CURRENT_TARGET_BYTE_ORDER check.
387 (sim_size, sim_trace, sim_info, sim_target_display_usage, sim_load,
388 sim_do_command, sim_set_callbacks, sim_complete_command): Delete.
389 (sim_target_parse_command_line): Mark static.
390 (free_state): New function.
391 (sim_open): Rewrite to use new common logic.
392 (sim_close): Delete body.
394 2015-03-30 Mike Frysinger <vapier@gentoo.org>
396 * Makefile.in (SIM_EXTRA_CFLAGS): Delete -DNEED_UI_LOOP_HOOK.
397 * interp.c [NEED_UI_LOOP_HOOK] (UI_LOOP_POLL_INTERVAL,
398 ui_loop_hook_counter, deprecated_ui_loop_hook): Delete.
399 (sim_resume) [NEED_UI_LOOP_HOOK]: Delete ui code.
401 2015-03-30 Mike Frysinger <vapier@gentoo.org>
403 * armemu.c [MODE32] (handle_v6_insn): Move definition.
404 (ARMul_Emulate26): Initialize do_int after label target.
405 * armemu.h (UNDEF_Test, UNDEF_Shift, UNDEF_MSRPC, UNDEF_MRSPC,
406 UNDEF_MULPCDest, UNDEF_MULDestEQOp1, UNDEF_LSRBPC,
407 UNDEF_LSRBaseEQOffWb, UNDEF_LSRBaseEQDestWb, UNDEF_LSRPCBaseWb,
408 UNDEF_LSRPCOffWb, UNDEF_LSMNoRegs, UNDEF_LSMPCBase,
409 UNDEF_LSMUserBankWb, UNDEF_LSMBaseInListWb, UNDEF_SWPPC,
410 UNDEF_CoProHS, UNDEF_MCRPC, UNDEF_LSCPCBaseWb,
411 UNDEF_UndefNotBounced, UNDEF_ShortInt, UNDEF_IllegalMode,
412 UNDEF_Prog32SigChange, UNDEF_Data32SigChange): Define to while(0).
413 * armsupp.c (ARMul_Align): Convert old style prototype.
414 * bag.c (addtolist, killwholelist): Mark static.
415 (BAG_newbag): Convert old style prototype.
416 * maverick.c (mv_compute_host_endianness): Delete.
417 * wrapper.c (verbosity, sim_set_verbose): Delete.
418 (init): Set state->verbose to 0.
420 2015-03-30 Mike Frysinger <vapier@gentoo.org>
422 * configure.ac: Call SIM_AC_OPTION_ENDIAN, SIM_AC_OPTION_ALIGNMENT,
423 SIM_AC_OPTION_HOSTENDIAN, SIM_AC_OPTION_ENVIRONMENT,
424 SIM_AC_OPTION_INLINE, and SIM_AC_OPTION_WARNINGS.
425 * config.in, configure: Regenerate.
427 2015-03-30 Mike Frysinger <vapier@gentoo.org>
429 * Makefile.in (COPRO): Delete.
430 (SIM_OBJS): Expand COPRO.
431 * configure.ac: Deletd stdint.h check.
433 * configure: Regenerate.
435 2015-03-16 Mike Frysinger <vapier@gentoo.org>
437 * config.in, configure: Regenerate.
438 * tconfig.in: Rename file ...
439 * tconfig.h: ... here.
441 2015-03-14 Mike Frysinger <vapier@gentoo.org>
443 * Makefile.in (SIM_EXTRA_CFLAGS): Add
444 -DSIM_USE_DEPRECATED_RUN_FRONTEND.
445 (SIM_RUN_OBJS): Set to run.o.
447 2015-03-14 Mike Frysinger <vapier@gentoo.org>
449 * configure.ac (AC_CHECK_HEADERS): Delete unistd.h.
450 * aclocal.m4, configure: Regenerate.
452 2014-08-19 Alan Modra <amodra@gmail.com>
454 * configure: Regenerate.
456 2014-08-15 Roland McGrath <mcgrathr@google.com>
458 * configure: Regenerate.
459 * config.in: Regenerate.
461 2014-03-18 Nick Clifton <nickc@redhat.com>
463 * wrapper.c: Convert function declarations to ISO C format.
464 (sim_open): Delete code for handling t,d and z command line
467 2014-03-14 Nick Clifton <nickc@redhat.com>
469 * wrapper.c (op_print): New function.
470 (sim_dis_read): New function.
471 (print_insn): New function - disassembles the given instruction.
472 (sim_trace): Note that tracing is now allowed.
473 (sim_create_inferior): Default to emulating v6.
474 Initialise the disassembler machinery.
475 (sim_target_parse_command_line): Add support for -t -d and -z
477 (sim_target_display_usage): Note existence of -d and -z options.
478 (sim_open): Parse -t -d and -z options.
479 * armemu.h: Add exports of trace, disas and trace_funcs.
480 Add prototype for print_insn.
481 * armemu.c (ARMul_Emulate26): Add tracing code.
482 Delete unused variables.
483 * thumbemu (handle_v6_thumb_insn): Delete unused variable Rd.
484 Move Rm variable into switch cases.
487 * armcopro.c (XScale_cp15_init): Add a return value.
488 (XScale_cp13_init): Likewise.
489 (XScale_cp14_init): Likewise.
490 (XScale_cp15_LDC): Delete unused function.
491 (XScale_cp15_STC): Likewise.
492 * maverick.c: Delete comment inside comment.
493 (DSPInit): Delete unused function.
494 (DSPMCR4): Fix compile time warning about missing parenthesis.
496 (DSPCDP6): Delete unused variable opcode2.
498 2014-03-14 David McQuillan <dmcq@tao-group.com>
501 * armemu.c (WriteR15Load): New function. Determines if the state
502 can be changed upon a write to R15.
503 (LoadMult): Use WriteR15Load.
504 * armemu.h (WRITEDESTB): Use WriteR15Load.
506 2014-03-10 Mike Frysinger <vapier@gentoo.org>
508 * wrapper.c (sim_do_command): Add const to cmd.
510 2014-03-05 Mike Frysinger <vapier@gentoo.org>
512 * wrapper.c (sim_load): Add const to prog.
514 2013-09-23 Alan Modra <amodra@gmail.com>
516 * configure: Regenerate.
518 2013-06-03 Mike Frysinger <vapier@gentoo.org>
520 * aclocal.m4, configure: Regenerate.
522 2013-05-07 Jayant Sonar <jayant.sonar@kpitcummins.com>
523 Kaushik Phatak <Kaushik.Phatak@kpitcummins.com>
525 * armemu.c (ARMul_Emulate32): Emulate instructions MOVW and MOVT.
527 2012-12-19 Joel Brobecker <brobecker@adacore.com>
529 * COPYING: Update to GPL version 3.
531 2012-09-03 Nick Clifton <nickc@redhat.com>
534 * armsupp.c (ARMul_MRC): Return 0 if access to the MRC instruction
537 2012-08-01 Kevin Buettner <kevinb@redhat.com>
539 * wrapper.c (libiberty.h): Include.
540 (sim_store_register, sim_fetch_register): On success, return
541 length, instead of -1.
543 2012-06-15 Joel Brobecker <brobecker@adacore.com>
545 * config.in, configure: Regenerate.
547 2012-06-13 Nick Clifton <nickc@redhat.com>
549 * wrapper.c (sim_create_inferior): Treat WMMX2 binaries as iWMMXt
552 2012-05-24 Pedro Alves <palves@redhat.com>
556 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
558 2012-05-18 Nick Clifton <nickc@redhat.com>
561 * wrapper.c: Include config.h before system header files.
563 2012-03-24 Mike Frysinger <vapier@gentoo.org>
565 * aclocal.m4, config.in, configure: Regenerate.
567 2011-12-03 Mike Frysinger <vapier@gentoo.org>
569 * aclocal.m4: New file.
570 * configure: Regenerate.
572 2011-10-17 Mike Frysinger <vapier@gentoo.org>
574 * configure.ac: Change include to common/acinclude.m4.
576 2011-10-17 Mike Frysinger <vapier@gentoo.org>
578 * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER
579 call. Replace common.m4 include with SIM_AC_COMMON.
580 * configure: Regenerate.
582 2011-07-01 Nick Clifton <nickc@redhat.com>
585 * iwmmxt.c (WCMPGT): Sign extend 32-bit values before performing a
587 (WMAC): Extend computed result before adding to result register.
588 (WRSA): Sign extend 32-bit values before shifting.
590 2011-04-16 Mike Frysinger <vapier@gentoo.org>
592 * wrapper.c (sim_complete_command): New stub function.
594 2010-05-26 Ozkan Sezer <sezeroz@gmail.com>
596 * communicate.c (MYread_char): Check error return from accept() call
597 by its equality to -1 not by it being negative.
598 (MYread_charwait): Likewise.
599 * main.c (main): Likewise for both socket() and accept() calls.
601 2010-04-14 Mike Frysinger <vapier@gentoo.org>
603 * wrapper.c (sim_write): Add const to buffer arg.
605 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
607 * configure: Regenerate.
609 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
611 * config.in: Regenerate.
612 * configure: Likewise.
614 * configure: Regenerate.
616 2008-11-24 Joel Sherrill <joel.sherrill@oarcorp.com>
618 * arminit.c, iwmmxt.c: Include <string.h> to
620 2008-07-11 Hans-Peter Nilsson <hp@axis.com>
622 * configure: Regenerate to track ../common/common.m4 changes.
625 2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
626 Daniel Jacobowitz <dan@codesourcery.com>
627 Joseph Myers <joseph@codesourcery.com>
629 * configure: Regenerate.
630 * wrapper.c (sim_target_display_usage): Add help parameter.
632 2007-02-27 Mark Mitchell <mark@codesourcery.com>
634 * armos.c (SWIflen): Do not treate file descriptor zero as
637 2007-02-15 Nick Clifton <nickc@redhat.com>
639 * armemu.c (handle_v6_insn): Fix typo in sign extension test of
640 the sext and sxtah instructions.
642 2007-02-08 Daniel Jacobowitz <dan@codesourcery.com>
644 Reported by timeless@gmail.com:
645 * wrapper.c (sim_target_parse_arg_array): Do not return void value.
647 2006-12-21 Hans-Peter Nilsson <hp@axis.com>
649 * acconfig.h: Remove.
650 * config.in: Regenerate.
652 2006-06-13 Richard Earnshaw <rearnsha@arm.com>
654 * configure: Regenerated.
656 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
658 * configure: Regenerated.
660 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
662 * configure: Regenerated.
664 2006-03-07 Paul Brook <paul@codesourcery.com>
666 * elfos.c (ARMul_OSHandleSWI): Call correct function for IsTTY.
668 2006-02-01 Shaun Jackman <sjackman@gmail.com>
670 * armos.c (ARMul_OSHandleSWI): Handle the RedBoot system
671 call meminfo. Return ENOSYS for unhandled RedBoot syscalls.
673 2005-11-23 Mark Mitchell <mark@codesourcery.com>
675 * wrapper.c (gdb/signals.h): Include it.
676 (SIGTRAP): Don't define.
678 (sim_stop_reason): Use TARGET_SIGNAL_* instead of SIG*.
680 2005-11-16 Shaun Jackman <sjackman@gmail.com>
682 * armos.c: Include limits.h
683 (unlink): Remove this macro. It is unused in this file and
684 conflicts with sim_callback->unlink.
685 (PATH_MAX): Define as 1024 if not already defined.
686 (ReadFileName): New function.
687 (SWIopen): Fix a potential buffer overflow.
688 (SWIremove): New function.
690 (ARMul_OSHandleSWI): Handle the RDP calls SWI_IsTTY,
691 SWI_Remove, and SWI_Rename, as well as the RDI calls
692 AngelSWI_Reason_IsTTY, AngelSWI_Reason_Remove, and
693 AngelSWI_Reason_Rename.
695 2005-09-19 Paul Brook <paul@codesourcery.com>
697 * armdefs.h: Define ARMsword and ARMsdword. Use stdint.h when
699 * armemu.c: Use them.
700 * armvirt.c (ARMul_MemoryInit): Use correct type for size.
701 * configure.ac: Check for stdint.h.
702 * config.in: Regenerate.
703 * configure: Regenerate.
705 2005-05-24 Nick Clifton <nickc@redhat.com>
707 * thumbemu.c (handle_v6_thumb_insn): New function.
708 (ARMul_ThumbDecode): Call handle_v6_thumb_insn() when an undefined
709 instruction binary is encountered.
711 2005-05-12 Nick Clifton <nickc@redhat.com>
713 * Update the address and phone number of the FSF organization in
714 the GPL notices in the following files:
715 COPYING, Makefile.in, armcopro.c, armdefs.h, armemu.c,
716 armemu.h, armfpe.h, arminit.c, armopts.h, armos.c, armos.h,
717 armrdi.c, armsupp.c, armvirt.c, bag.c, bag.h, communicate.c,
718 communicate.h, dbg_conf.h, dbg_cp.h, dbg_hif.h, dbg_rdi.h,
719 gdbhost.c, gdbhost.h, iwmmxt.c, iwmmxt.h, kid.c, main.c,
720 maverick.c, parent.c, thumbemu.c, wrapper.c
722 2005-04-20 Nick Clifton <nickc@redhat.com>
724 * armemu.c (handle_v6_insn): New function - emulate a few of the
725 v6 instructions - the ones now generated by GCC.
726 (ARMulEmulate32): Call handle_v6_insn when a possible v6 insn is
728 * armdefs.h (struct ARMul_State): Add new field: is_v6.
729 (ARM_v6_Prop): Define.
730 * arminit.c (ARMul_NewState): Initialise the v6 flag.
731 (ARMul_SelectProcessor): Determine if the v6 flag should be
733 * wrapper.c (sim_create_inferior): For unknown architectures,
734 default to allowing the v6 instructions.
736 2005-04-18 Nick Clifton <nickc@redhat.com>
738 * iwmmxt.c (WMAC, WMADD): Move casts from the LHS of an assignment
740 (WSLL, WSRA, WSRL, WUNPCKEH, WUNPACKEL): Use ULL suffix to
741 indicate an unsigned long long constant.
743 2005-03-23 Mark Kettenis <kettenis@gnu.org>
745 * configure: Regenerate.
747 2005-01-14 Andrew Cagney <cagney@gnu.org>
749 * configure.ac: Sinclude aclocal.m4 before common.m4. Add
750 explicit call to AC_CONFIG_HEADER.
751 * configure: Regenerate.
753 2005-01-12 Andrew Cagney <cagney@gnu.org>
755 * configure.ac: Update to use ../common/common.m4.
756 * configure: Re-generate.
758 2005-01-11 Andrew Cagney <cagney@localhost.localdomain>
760 * configure: Regenerated to track ../common/aclocal.m4 changes.
762 2005-01-07 Andrew Cagney <cagney@gnu.org>
764 * configure.ac: Rename configure.in, require autoconf 2.59.
765 * configure: Re-generate.
767 2004-12-08 Hans-Peter Nilsson <hp@axis.com>
769 * configure: Regenerate for ../common/aclocal.m4 update.
771 2004-06-28 Andrew Cagney <cagney@gnu.org>
773 * armemu.c: Rename ui_loop_hook to deprecated_ui_loop_hook.
775 2003-12-29 Mark Mitchell <mark@codesourcery.com>
777 * armos.c (fcntl.h): Do not include it.
778 (O_RDONLY): Do not define.
779 (O_WRONLY): Likewise.
781 (targ-vals.h): Include it.
782 (translate_open_mode): Use TARGET_O_* instead of O_*.
784 * Makefile.in (armos.o): Depend on targ-vals.h.
786 2003-04-13 Nick Clifton <nickc@redhat.com>
788 * armvirt.c (GetWord): Only call XScale_check_memacc if in XScale
792 2003-03-30 Nick Clifton <nickc@redhat.com>
794 * configure.in (CON_FLAGS): Remove.
795 (COPRO): Unconditionally include iwmmxt.o.
796 * configure: Regenerate.
797 * Makefile.in (CON_FLAGS): Remove.
798 * armcopro.c: Remove use of __IWMMXT__ flag.
799 * wrapper.c: Likewise.
800 * armemu.c: Likewise.
801 Add explanatory comment for suppressed code.
803 2003-03-27 Nick Clifton <nickc@redhat.com>
805 * armos.c (ARMul_OsHandleSWI): Catch SWIs for unhandled vectors.
807 2003-03-27 Nick Clifton <nickc@redhat.com>
809 * configure.in: (CON_FLAGS): Define and intialise.
810 (COPRO): Add iwmmxt.o if configuring for XScale.
811 * configure: Regenerate.
812 * Makefile.in (iwmmxt.o): Add rule to build.
814 (ALL_FLAGS): Add CON_FLAGS.
815 * armcopro.c (ARMul_CoProInit): Initialise iWMMXt coprocessors.
816 * armdefs.h (struct ARMul_State): Add 'is_iWMMXt' field.
817 (ARM_iWMMXt_Prop): Define.
818 * armemu.c (ARMul_Emulate16): Intercept iWMMXt instructions and
820 * arminit.c (ARMul_NewState): Initialise 'is_iWMMXt'.
821 (ARMul_Abort): Catch branches through uninitialised vectors.
822 * armos.c (softevtorcode): Update comment.
823 (ARMul_OsInit): Use ARMUndefinedInstrV.
824 * wrapper.c (sim_create_inferior): Handle iWMMXt processor type.
825 (sim_store_register): Handle iWMMXt registers.
826 (sim_fetch_register): Handle iWMMXt registers.
827 * iwmmxt.h: New file. Exported iWMMXt coprocessor emulator
829 * iwmmxt.c: New file: iWMMXt emulator.
831 2003-03-20 Nick Clifton <nickc@redhat.com>
833 * Contribute support for Cirrus Maverick ARM co-processor,
834 written by Aldy Hernandez <aldyh@redhat.com> and
835 Andrew Cagney <cagney@redhat.com>:
837 * maverick.c: New file: Support for Maverick floating point
839 * Makefile.in: Add maverick.o target.
840 * configure.in (COPRO): Add maverick.o.
841 * configure: Regenerate.
842 * armcopro.c (ARMul_CoProInit): Only initialise co-processors
843 available on target processor. Add code to initialse Maverick
844 co-processor support code.
845 * armdefs.h (ARMul_state): Add is_ep9312 field.
846 (ARM_ep9312_Prop): Define.
847 * armemu.h: Add prototypes for Maverick co-processor
849 * arminit.c (ARMul_SelectProcessor): Initialise the
850 co-processor support once the chip has been selected.
851 * wrapper.c: Add support for Maverick co-processor.
852 (init): Do not call ARMul_CoProInit. Delays this until the
853 chip has been selected.
855 2003-03-02 Nick Clifton <nickc@redhat.com>
857 * armos.c (SWIWrite0): Catch big-endian bug when printing
860 2003-02-27 Andrew Cagney <cagney@redhat.com>
862 * wrapper.c (sim_create_inferior, sim_open): Rename _bfd to bfd.
864 2003-01-10 Ben Elliston <bje@redhat.com>
866 * README.Cygnus: Rename from this ..
867 * README: .. to this.
869 2002-09-27 Andrew Cagney <ac131313@redhat.com>
871 * wrapper.c (sim_open): Add support for -m<mem-size>.
872 (mem_size): Reduce to 2MB.
875 2002-08-15 Nick Clifton <nickc@redhat.com>
877 * armos.c (ARMul_OSHandleSWI): Catch and ignore SWIs of -1, they
878 can be caused by an interrupted system call being resumed by GDB.
880 2002-07-05 Nick Clifton <nickc@cambridge.redhat.com>
882 * armemu.c (ARMul_Emulate32): Add more tests for valid MIA, MIAPH
883 and MIAxy instructions.
885 2002-06-21 Nick Clifton <nickc@cambridge.redhat.com>
887 * armos.h (ADP_Stopped_RunTimeError): Set correct value.
889 2002-06-16 Andrew Cagney <ac131313@redhat.com>
891 * configure: Regenerated to track ../common/aclocal.m4 changes.
893 2002-06-12 Andrew Cagney <ac131313@redhat.com>
895 * Makefile.in: Update copyright.
896 (wrapper.o): Specify dependencies.
897 * wrapper.c: Include "gdb/sim-arm.h".
898 (sim_store_register, sim_fetch_register): Rewrite using `enum
899 arm_sim_regs' and a switch.
901 2002-06-09 Andrew Cagney <cagney@redhat.com>
903 * wrapper.c: Include "gdb/callback.h" and "gdb/remote-sim.h".
904 * armos.c: Include "gdb/callback.h".
906 2002-05-29 Nick Clifton <nickc@cambridge.redhat.com>
908 * armcopro.c (XScale_check_memacc): Set the FSR and FAR registers
909 if a Data Abort is detected.
911 2002-05-27 Nick Clifton <nickc@cambridge.redhat.com>
913 * armvirt.c (GetWord): Only perform access checks if 'check'
916 * wrapper.c (sim_create_inferior): Report unknown machine
918 * thumbemu.c (ARMul_ThumbDecode, Case 31): Do not set LR to pc +
919 2, it has already been advanced.
921 2002-05-23 Nick Clifton <nickc@cambridge.redhat.com>
923 * thumbemu.c (ARMul_ThumbDecode): When decoding a BLX(1)
924 instruction do not add in the second bit of the base address -
925 this has already been accounted for.
927 2002-05-21 Nick Clifton <nickc@cambridge.redhat.com>
929 * armcopro.c (check_cp13_access): Allow access to register 1 when
931 (write_cp13_reg): Allow bit 0 of reg 1 of CRm 1 to be written to.
933 2002-05-17 Nick Clifton <nickc@cambridge.redhat.com>
935 * Makefile.in (SIM_TARGET_SWITCHES): Define.
936 * armos.c (swi_mask): Define. Initialise to supporting all
938 (ARMul_OSInit): For XScale targets, only support the ANGEL
939 SWI interface. (This is at the request if Intel).
940 (ARMul_OSHandleSWI): Examine swi_mask to see if a particular
941 SWI call should be emulated.
942 Do not fall through from AngelSWI_Reason_WriteC.
943 Propagate exit code from RedBoot Exit SWI.
944 * rdi-dgb.h (swi_mask): Prototype.
945 (SWI_MASK_DEMON, SWI_MASK_ANGEL, SWI_MASK_REDBOOT): Define.
946 * wrapper.c (sim_target_parse_command_line): New function.
947 Look for and handle --swi-support switch.
948 (sim_target_parse_arg_array): New function. Process an argv
949 array for parsing by sim_target_parse_command_line.
950 (sim_target_display_usage): New function. Describe syntax of
951 --swi-suppoort switch.
952 (sim_open): Add call to sim_target_parse_arg_array).
954 2002-05-09 Nick Clifton <nickc@cambridge.redhat.com>
956 * armos.c (ARMul_OSHandleSWI): Support the RedBoot SWI in ARM
957 mode and some of its system calls.
959 2002-03-17 Anthony Green <green@redhat.com>
961 * wrapper.c (mem_size): Increase the default target memory to 8MB.
963 2002-02-21 Keith Seitz <keiths@redhat.com>
965 * armos.c (SWIWrite0): Use generic host_callback mechanism
966 for supported OS functions "open", "close", "write", etc.
969 (SWIwrite): Likewise.
971 (ARMul_OSHandleSWI): Likewise.
973 2002-02-05 Nick Clifton <nickc@cambridge.redhat.com>
975 * wrapper.c (sim_create_inferior): Modify previous patch so that
976 it is only triggered for COFF format executables.
978 2002-02-04 Nick Clifton <nickc@cambridge.redhat.com>
980 * wrapper.c (sin_create_inferior): If a v5 architecture is
981 detected, assume it might be an XScale binary, since there is no
982 way to distinguish between the two in the COFF file format.
984 2002-01-10 Nick Clifton <nickc@cambridge.redhat.com>
986 * arminit.c (ARMul_Abort): Fix parameters passed to CPRead[13].
987 * armemu.c (ARMul_Emulate32): Fix parameters passed to CPRead[13]
989 Fix formatting. Improve layout.
990 * armemu.h: Fix formatting. Improve layout.
992 2002-01-09 Nick Clifton <nickc@cambridge.redhat.com>
994 * wrapper.c (sim_fetch_register): If fetching more than 4 bytes
995 return zeroes in the other words.
996 General formatting tidy ups.
998 2001-11-16 Ben Harris <bjh21@netbsd.org>
1000 * Makefile.in (armemu32.o): Replace $< with autoconf recommended
1002 (armemu26.o): Ditto.
1004 2001-10-18 Nick Clifton <nickc@cambridge.redhat.com>
1006 * armemu.h (CP_ACCESS_ALLOWED): New macro.
1008 * armcopro.c (read_cp14_reg): Make static.
1009 (write_cp14_reg): Make static.
1010 (check_cp13_access): Use CP_ACCESS_ALLOWED macro.
1012 * armsupp.c (ARMul_LDC): Check CP_ACCESS_ALLOWED.
1013 (ARMul_STC): Check CP_ACCESS_ALLOWED.
1014 (ARMul_MCR): Check CP_ACCESS_ALLOWED.
1015 (ARMul_MRC): Check CP_ACCESS_ALLOWED.
1016 (ARMul_CDP): Check CP_ACCESS_ALLOWED.
1018 * armemu.c (MCRR): Check CP_ACCESS_ALLOWED. Test Rd and Rn not
1020 (MRRC): Check CP_ACCESS_ALLOWED. Test Rd and Rn not equal to 15.
1023 2001-05-11 Nick Clifton <nickc@cambridge.redhat.com>
1025 * armemu.c (ARMul_Emulate32): Fix handling of XScale LDRD and STRD
1026 instructions with post indexed addressing modes.
1028 2001-05-08 Jens-Christian Lache <lache@tu-harburg.de>
1030 * armsupp.c (ARMul_FixCPSR): Check Mode not Bank in order to
1031 determine rocesor mode.
1033 2001-04-18 matthew green <mrg@redhat.com>
1035 * armcopro.c (write_cp15_reg): Set CHANGEMODE if endianness changes.
1036 (read_cp15_reg): Make non-static.
1037 (XScale_cp15_LDC): Update for write_cp15_reg() change.
1038 (XScale_cp15_MCR): Likewise.
1039 (XScale_cp15_write_reg): Likewise.
1040 (XScale_check_memacc): New function. Check for breakpoints being
1041 activated by memory accesses. Does not support the Branch Target
1043 (XScale_set_fsr_far): New function. Set FSR and FAR for XScale.
1044 (XScale_debug_moe): New function. Set the debug Method Of Entry,
1046 (write_cp14_reg): Reset count counter if requested.
1047 * armdefs.h (struct ARMul_State): New members `LastTime' and
1048 `CP14R0_CCD' used for the timer/counters.
1049 (ARMul_CP13_R0_FIQ, ARMul_CP13_R0_IRQ, ARMul_CP13_R8_PMUS,
1050 ARMul_CP14_R0_ENABLE, ARMul_CP14_R0_CLKRST, ARMul_CP14_R0_CCD,
1051 ARMul_CP14_R0_INTEN0, ARMul_CP14_R0_INTEN1, ARMul_CP14_R0_INTEN2,
1052 ARMul_CP14_R0_FLAG0, ARMul_CP14_R0_FLAG1, ARMul_CP14_R0_FLAG2,
1053 ARMul_CP14_R10_MOE_IB, ARMul_CP14_R10_MOE_DB, ARMul_CP14_R10_MOE_BT,
1054 ARMul_CP15_R1_ENDIAN, ARMul_CP15_R1_ALIGN, ARMul_CP15_R5_X,
1055 ARMul_CP15_R5_ST_ALIGN, ARMul_CP15_R5_IMPRE, ARMul_CP15_R5_MMU_EXCPT,
1056 ARMul_CP15_DBCON_M, ARMul_CP15_DBCON_E1, ARMul_CP15_DBCON_E0): New
1057 defines for XScale registers.
1058 (XScale_check_memacc, XScale_set_fsr_far, XScale_debug_moe): Prototype.
1059 (ARMul_Emulate32, ARMul_Emulate26): Clean up function definition.
1060 (ARMul_Emulate32): Handle the clock counter and hardware instruction
1061 breakpoints. Call XScale_set_fsr_far() for software breakpoints and
1062 software interrupts.
1063 (LoadMult): Call XScale_set_fsr_far() for data aborts.
1064 (LoadSMult): Likewise.
1065 (StoreMult): Likewise.
1066 (StoreSMult): Likewise.
1067 * armemu.h (write_cp15_reg): Update prototype.
1068 * arminit.c (ARMul_NewState): Initialise CP14R0_CCD and LastTime.
1069 (ARMul_Abort): If XScale, check for FIQ and IRQ being enabled in CP13
1071 * armvirt.c (GetWord): Call XScale_check_memacc().
1072 (PutWord): Likewise.
1074 2001-03-20 Nick Clifton <nickc@redhat.com>
1076 * armvirt.c (ARMul_ReLoadInstr): Do not enable alignment checking
1077 when loading unaligned thumb instructions.
1079 2001-03-06 Nick Clifton <nickc@redhat.com>
1081 * thumbemu.c (ARMul_ThumbDecode): Delete label bo_blx2.
1082 Compute destination address of BLX(1) instruction by
1083 taking bit 1 from PC and not from bit 0 of the offset.
1085 2001-02-27 Nick Clifton <nickc@redhat.com>
1087 * armvirt.c (GetWord): Add new parameter - check - to enable or
1088 disable the alignment checking.
1089 (PutWord): Add new parameter - check - to enable or disable the
1091 (ARMul_ReLoadInstr): Pass extra parameter to GetWord.
1092 (ARMul_ReadWord): Pass extra parameter to GetWord.
1093 (ARMul_WriteWord): Pass extra parameter to PutWord.
1094 (ARMul_StoreHalfWord): Pass extra parameter to PutWord.
1095 (ARMul_WriteByte): Pass extra parameter to GetWord.
1096 (ARMul_SwapWord): Pass extra parameter to PutWord.
1097 (ARMul_SafeReadByte): New Function: Read a byte but do not abort.
1098 (ARMul_SafeWriteByte): New Function: Write a byte but do not abort.
1100 * armdefs.h: Add prototypes for ARMul_SafeReadByte and
1101 ARMul_SafeWriteByte.
1103 * wrapper.c (sim_write): Use ARMul_SafeWriteByte.
1104 (sim_read): Use ARMul_SafeReadByte.
1106 * armos.c (in_SWI_handler): Remove.
1107 (SWIWrite0): Use ARMul_SafeReadByte.
1108 (WriteCommandLineTo): Use ARMul_SafeWriteByte.
1109 (SWIopen): Use ARMul_SafeReadByte.
1110 (SWIread): Use ARMul_SafeWriteByte.
1111 (SWIwrite): Use ARMul_SafeReadByte.
1112 (ARMul_OSHandleSWI): Remove use of is_SWI_handler.
1113 (ARMul_OSException): Remove use of is_SWI_handler.
1115 2001-02-16 Nick Clifton <nickc@redhat.com>
1117 * armemu.c: Remove Prefetch abort for breakpoints. Instead set
1118 the state to RESUME.
1120 2001-02-14 Nick Clifton <nickc@redhat.com>
1122 * armemu.c: Add code to preserve processor mode when a prefetch
1123 abort is signalled after processing a breakpoint.
1125 * wrapper.c (sim_create_inferior): Reset processor into ARM mode
1126 for any machine type except the early ARMs.
1128 2001-02-13 Nick Clifton <nickc@redhat.com>
1130 * armos.c (in_SWI_handler): New static variable.
1131 (ARMul_OSHandleSWI): Set in_SWI_handler whilst emulating a SWI.
1132 (ARMul_OSException): Ignore exceptions generated whilst emulating
1135 2001-02-12 Nick Clifton <nickc@redhat.com>
1137 * armemu.h (NEGBRANCH): Fix defintion.
1139 2001-02-01 Nick Clifton <nickc@redhat.com>
1141 * armemu.c (LoadSMult): Update base address register after
1142 restoring register bank.
1143 (StoreMult): Update base address register after restoring register
1146 2001-01-31 Nick Clifton <nickc@redhat.com>
1148 * armvirt.c (PutWord): Detect installation of SWI vector.
1149 (SWI_vector_installed): Define.
1150 * armos.c (ARMul_OsInit): Reset SWI_vector_installed.
1151 * armos.h (SWI_vector_installed): Declare.
1152 * wrapper.c (SWI_vector_installed): Remove definition.
1153 (sim_write): Remove check of SWI vector installation
1155 2000-12-18 Nick Clifton <nickc@redhat.com>
1157 * armemu.c (ARMul_Emulate26): Fix test for StoreDouble
1160 2000-12-10 Nick Clifton <nickc@redhat.com>
1162 * armos.c (ARMul_OSHandleSWI): Add 0x91 as an FPE SWI.
1164 2000-12-07 Nick Clifton <nickc@redhat.com>
1166 * armemu.c (ARMul_Emulate26): Detect double word load and
1167 store instructions and call emulation routines.
1168 (Handle_Load_Double): Emulate a double word load instruction.
1169 (Handle_Store_Double): Emulate a double word store
1172 2000-12-03 Nick Clifton <nickc@redhat.com>
1174 * armos.c: Fix formatting.
1175 (ARMul_OSHandleSWI): Suppress support of DEMON SWIs when in xscale
1178 2000-11-29 Nick Clifton <nickc@redhat.com>
1180 * armdefs.h (State): Add 'v5e' and 'xscale' fields.
1181 (ARM_v5e_Prop): Define.
1182 (ARM_XScale_Prop): Define.
1184 * wrapper.c (sim_create_inferior): Select processor based on
1186 (SWI_vector_installed): New boolean. Set to true if the SWI
1187 vector address is written to by the executable.
1189 * arminit.c (ARMul_NewState): Switch default to 32 bit mode.
1190 (ARMul_SelectProcessor): Initialise v5e and xscale signals.
1191 (ARMul_Abort): Fix calculation of LR address.
1193 * armos.c (ARMul_OSHandleSWI): If a SWI vector has been installed
1194 and a SWI is not handled by the simulator, pass the SWI off to the
1195 vector, otherwise issue a warning message and continue.
1197 * armsupp.c (ARMul_CPSRAltered): Set S bit aswell.
1199 * thumbemu.c: Add v5 instruction simulation.
1200 * armemu.c: Add v5, XScale and El Segundo instruction simulation.
1202 * armcopro.c: Add XScale co-processor emulation.
1203 * armemu.h: Add exported XScale co-processor functions.
1205 2000-09-15 Nick Clifton <nickc@redhat.com>
1207 * armdefs.h: Rename StrongARM property to v4_ARM and add v5 ARM
1208 property. Delete unnecessary processor names.
1209 (ARM_Strong_Prop): Delete.
1210 (STRONGARM): Delete.
1213 (State): Delete is_StrongARM boolean. Add is_v4 and is_v5
1216 * armemu.h (BUSUSEDINCPCS): Use is_v4 boolean.
1217 (BUSUSEDINCPCN): Use is_v4 boolean.
1219 * arminit.c (ARMul_NewState): Initialise is_v4 and is_v5 fields.
1220 (ARMul_SelectProcessor): Change second parameter from 'processor'
1221 to 'properties'. Set is_v4 and is_v5 booleans in State.
1223 * armrdi.c: Remove use of ARM processor names. Replace with ARM
1224 processor properties.
1226 * wrapper.c (sim_create_inferior): Choose properties passed to
1227 ARMul_SelectProcessor based on machine number.
1229 2000-08-14 Nick Clifton <nickc@redhat.com>
1231 * armemu.c (LHPOSTDOWN): Compute write back value before
1232 performing load in case the offset register is overwritten.
1235 2000-07-14 Fernando Nasser <fnasser@cygnus.com>
1237 * wrapper.c (sim_create_inferior): Fix typo in the previous patch.
1239 2000-07-14 Fernando Nasser <fnasser@cygnus.com>
1241 * wrapper.c (sim_create_inferior): Reset mode to ARM when creating a
1244 2000-07-04 Alexandre Oliva <aoliva@redhat.com>
1246 * armvirt.c (ABORTS): Do not define.
1248 * armdefs.h (struct ARMul_State): Add is_StrongARM.
1249 (ARM_Strong_Prop, STRONGARM): Define.
1250 * arminit.c (ARMul_NewState): Reset is_StrongARM.
1251 (ARMul_SelectProcessor): Set is_StrongARM.
1252 * wrapper.c (sim_create_inferior): Use bfd machine type to
1253 determine processor type to emulate.
1254 * armemu.h (BUSUSEDINCPCS, BUSUSEDINCPCN): Don't increment PC
1255 when emulating StrongARM.
1257 * armemu.c (ARMul_Emulate, t_undefined): Proceed to next insn.
1259 * armemu.h (INSN_SIZE): New macro.
1260 (SET_ABORT): Save CPSR in SPSR and set LR.
1261 * armemu.c (ARMul_Emulate, isize): Set to INSN_SIZE.
1262 (WriteR15, WriteSR15): Do not discard bit 1 in Thumb mode.
1263 * arminit.c (ARMul_Abort): Use new SETABORT and INSN_SIZE.
1265 * armemu.c (LoadSMult): Use WriteR15() to discard the least
1266 significant bits of PC.
1268 * armemu.h (WRITEDESTB): New macro.
1269 * armemu.c (ARMul_Emulate26, bl): Use WriteR15Branch() to
1270 modify PC. Moved the existing logic...
1271 (WriteR15Branch): ... here. New function.
1272 (WriteR15, WriteSR15): Drop the two least significant bits.
1273 (LoadSMult): Use WriteR15Branch() to modify PC.
1274 (LoadMult): Use WRITEDESTB() instead of WRITEDEST().
1276 * armemu.h (GETSPSR): Call ARMul_GetSPSR().
1277 * armsupp.c (ARMul_CPSRAltered): Zero out bits as they're
1278 extracted from state->Cpsr, but preserve the unused bits.
1279 (ARMul_GetCPSR): Get bits preserved in state->Cpsr.
1280 (ARMul_GetSPSR, ARMul_FixCPSR): Use ARMul_GetCPSR() to
1281 get the full CPSR word.
1283 * armemu.h (PSR_FBITS, PSR_SBITS, PSR_XBITS, PSR_CBITS): New.
1284 (SETPSR_F, SETPSR_S, SETPSR_X, SETPSR_C): New macros.
1285 (SETPSR, SET_INTMODE, SETCC): Removed.
1286 * armsupp.c (ARMul_FixCPSR, ARMul_FixSPSR): Do not test bit
1287 mask. Use SETPSR_* to modify PSR.
1288 (ARMul_SetCPSR): Load all bits from value.
1289 * armemu.c (ARMul_Emulate, msr): Do not test bit mask.
1291 * armemu.c (ARMul_Emulate): Compute writeback value before
1292 loading, since the offset register may be the destination
1295 * armdefs.h (SYSTEMBANK): Define as USERBANK.
1296 * armsupp.c (ARMul_SwitchMode): Remove SYSTEMBANK cases.
1298 2000-06-22 Alexandre Oliva <aoliva@cygnus.com>
1300 * armemu.c (Multiply64): Fix computation of flag N.
1302 * armemu.c (MultiplyAdd64): Fix computation of flag N.
1304 2000-06-20 Alexandre Oliva <aoliva@cygnus.com>
1306 * armemu.h (NEGBRANCH): Do not overwrite the two most significant
1309 2000-05-25 Nick Clifton <nickc@cygnus.com>
1311 * armcopro.c (MMUMCR): Only indicate mode change if a singal has
1313 (MMUWrite): Only indicate mode change if a singal has really
1316 * armdefs.h (SYSTEMMODE): Define.
1317 (BANK_CAN_ACEESS_SPSR): Define.
1319 * armemu.c (ARM_Emulate26): If the mode has changed allow the PC
1320 to advance before stopping the emulation.
1322 * arminit.c (ARMul_Reset): Ensure Mode field of State is set
1325 * armos.c (ARMul_OSInit): Create a initial stack pointer for
1328 * armsupp.c (ModeToBank): Remove unused first parameter.
1329 Add support for System Mode.
1330 (ARMul_GetSPSR): Use BANK_CAN_ACCESS_SPSR macro.
1331 (ARMul_SetSPSR): Use BANK_CAN_ACCESS_SPSR macro.
1332 (ARMul_FixSPSR): Use BANK_CAN_ACCESS_SPSR macro.
1333 (ARMulSwitchMode): Add support for System Mode.
1335 Wed May 24 14:40:34 2000 Andrew Cagney <cagney@b1.cygnus.com>
1337 * configure: Regenerated to track ../common/aclocal.m4 changes.
1339 2000-05-23 Nick Clifton <nickc@cygnus.com>
1341 * wrapper.c (sim_store_register): Special handling for CPSR
1344 2000-03-11 Philip Blundell <philb@gnu.org>
1346 * armemu.c (LoadSMult, LoadMult): Correct handling of aborts.
1347 Patch from Allan Skillman <Allan.Skillman@arm.com>.
1349 Wed Mar 22 15:24:21 2000 glen mccready <gkm@pobox.com>
1351 * wrapper.c (sim_open,sim_close): Copy into myname, free myname.
1353 2000-02-08 Nick Clifton <nickc@cygnus.com>
1355 * wrapper.c: Fix compile time warning messages.
1356 * armcopro.c: Fix compile time warning messages.
1357 * armdefs.h: Fix compile time warning messages.
1358 * armemu.c: Fix compile time warning messages.
1359 * armemu.h: Fix compile time warning messages.
1360 * armos.c: Fix compile time warning messages.
1361 * armsupp.c: Fix compile time warning messages.
1362 * armvirt.c: Fix compile time warning messages.
1363 * bag.c: Fix compile time warning messages.
1365 2000-02-02 Bernd Schmidt <bernds@cygnus.co.uk>
1367 * *.[ch]: Use indent to make readable.
1369 1999-11-22 Nick Clifton <nickc@cygnus.com>
1371 * armos.c (SWIread): Generate an error message if a huge read is
1373 (SWIwrite): Generate an error message if a huge write is
1376 1999-10-27 Nick Clifton <nickc@cygnus.com>
1378 * thumbemu.c (ARMul_ThumbDecode): Accept 0xbebe as a thumb
1381 1999-10-08 Ulrich Drepper <drepper@cygnus.com>
1383 * armos.c (SWIopen): Always pass third parameter with 0666 since
1384 otherwise uninitialized memory gets access if the O_CREAT bit is
1385 set and so we possibly cannot access the file afterwards.
1387 1999-09-29 Doug Evans <devans@casey.cygnus.com>
1389 * armos.c (SWIWrite0): Send output to stdout instead of stderr.
1390 (ARMul_OSHandleSWI, case SWI_WriteC,AngelSWI_Reason_WriteC): Ditto.
1392 Thu Sep 2 18:15:53 1999 Andrew Cagney <cagney@b1.cygnus.com>
1394 * configure: Regenerated to track ../common/aclocal.m4 changes.
1396 1999-05-08 Felix Lee <flee@cygnus.com>
1398 * configure: Regenerated to track ../common/aclocal.m4 changes.
1400 1999-04-06 Keith Seitz <keiths@cygnus.com>
1402 * wrapper.c (stop_simulator): New global.
1403 (sim_stop): Set sim state to STOP and set
1405 (sim_resume): Reset stop_simulator.
1406 (sim_stop_reason): If stop_simulator is set, tell gdb
1407 that the we took SIGINT.
1408 * armemu.c (ARMul_Emulate26): Don't loop forever. Stop if
1409 stop_simulator is set.
1411 1999-04-02 Keith Seitz <keiths@cygnus.com>
1413 * armemu.c (ARMul_Emulate26): If NEED_UI_LOOP_HOOK, call ui_loop_hook
1414 whenever the counter expires.
1415 * Makefile.in (SIM_EXTRA_CFLAGS): Include define NEED_UI_LOOP_HOOK.
1417 1999-03-24 Nick Clifton <nickc@cygnus.com>
1419 * armemu.c (ARMul_Emulate26): Handle new breakpoint value.
1420 * thumbemu.c (ARMul_ThumbDecode): Handle new breakpoint value.
1422 Mon Sep 14 09:00:05 1998 Nick Clifton <nickc@cygnus.com>
1424 * wrapper.c (sim_open): Set endianness according to BFD or command
1427 * tconfig.in: Define SIM_HAVE_BIENDIAN.
1429 Thu Aug 27 11:00:05 1998 Nick Clifton <nickc@cygnus.com>
1431 * armemu.c (Multiply64): Test for Rm (rather than Rs) not being
1432 the same as either RdHi or RdLo.
1434 Thu Jul 2 10:24:35 1998 Nick Clifton <nickc@cygnus.com>
1436 * armos.c (ARMul_OSHandleSWI: AngelSWI_Reason_ReportException):
1437 Set Reg[0] based on reason for for the exception.
1439 Thu Jun 4 15:22:03 1998 Jason Molenda (crash@bugshack.cygnus.com)
1441 * armos.c (SWIwrite0): New function.
1442 (WriteCommandLineTo): New function.
1443 (SWIopen): New function.
1444 (SWIread): New function.
1445 (SWIwrite): New function.
1446 (SWIflen): New function.
1447 (ARMul_OSHandleSWI): Call new functions instead of handling
1449 (ARMul_OSHandleSWI): Handle Angel SWIs correctly.
1450 (*): Reformat spacing to be a bit more GNUly.
1451 Most code taken from a patch by Anthony Thompson
1452 (athompso@cambridge.arm.com)
1454 Tue Jun 2 15:22:22 1998 Nick Clifton <nickc@cygnus.com>
1456 * armos.h: Add Angel SWI and its reason codes.
1457 * armos.c (ARMul_OSHandleSWI): Ignore Angel SWIs (for now).
1459 Mon Jun 1 17:14:19 1998 Anthony Thompson (athompso@cambridge.arm.com)
1461 * armos.c (ARMul_OSHandleSWI::SWI_Open): Handle special case
1462 of ":tt" to catch stdin in addition to stdout.
1463 (ARMul_OSHandleSWI::SWI_Seek): Return 0 or 1 to indicate failure
1464 or success of lseek().
1466 Wed May 20 17:36:25 1998 Nick Clifton <nickc@cygnus.com>
1468 * armos.c (ARMul_OSHandleSWI): Special case code to catch attempts
1471 Wed Apr 29 15:29:55 1998 Jeff Johnston <jjohnstn@cygnus.com>
1473 * armos.c (ARMul_OSHandleSWI): Added code for SWI_Clock,
1474 SWI_Flen, and SWI_Time. Also fixed SWI_Seek code to only
1475 seek from offset 0 and not to use R2 for whence since it is
1476 not passed as part of the SWI call.
1478 Tue Apr 28 18:33:31 1998 Geoffrey Noer <noer@cygnus.com>
1480 * configure: Regenerated to track ../common/aclocal.m4 changes.
1482 Sun Apr 26 15:31:55 1998 Tom Tromey <tromey@creche>
1484 * configure: Regenerated to track ../common/aclocal.m4 changes.
1487 Sun Apr 26 15:20:26 1998 Tom Tromey <tromey@cygnus.com>
1489 * acconfig.h: New file.
1490 * configure.in: Reverted change of Apr 24; use sinclude again.
1492 Fri Apr 24 14:16:40 1998 Tom Tromey <tromey@creche>
1494 * configure: Regenerated to track ../common/aclocal.m4 changes.
1497 Fri Apr 24 11:20:19 1998 Tom Tromey <tromey@cygnus.com>
1499 * configure.in: Don't call sinclude.
1501 Sat Apr 4 20:36:25 1998 Andrew Cagney <cagney@b1.cygnus.com>
1503 * configure: Regenerated to track ../common/aclocal.m4 changes.
1505 Fri Mar 27 16:15:52 1998 Andrew Cagney <cagney@b1.cygnus.com>
1507 * configure: Regenerated to track ../common/aclocal.m4 changes.
1509 Wed Mar 25 12:35:29 1998 Andrew Cagney <cagney@b1.cygnus.com>
1511 * configure: Regenerated to track ../common/aclocal.m4 changes.
1513 Wed Mar 18 12:38:12 1998 Andrew Cagney <cagney@b1.cygnus.com>
1515 * configure: Regenerated to track ../common/aclocal.m4 changes.
1517 Tue Mar 10 09:26:38 1998 Nick Clifton <nickc@cygnus.com>
1519 * armopts.h: Remove definition of LITTLEND - it is not used.
1521 Tue Feb 17 12:35:54 1998 Andrew Cagney <cagney@b1.cygnus.com>
1523 * wrapper.c (sim_store_register, sim_fetch_register): Pass in
1524 length parameter. Return -1.
1526 Sun Feb 1 16:47:51 1998 Andrew Cagney <cagney@b1.cygnus.com>
1528 * configure: Regenerated to track ../common/aclocal.m4 changes.
1530 Sat Jan 31 18:15:41 1998 Andrew Cagney <cagney@b1.cygnus.com>
1532 * configure: Regenerated to track ../common/aclocal.m4 changes.
1534 Mon Jan 19 22:26:29 1998 Doug Evans <devans@seba>
1536 * configure: Regenerated to track ../common/aclocal.m4 changes.
1538 Mon Dec 15 23:17:11 1997 Andrew Cagney <cagney@b1.cygnus.com>
1540 * configure: Regenerated to track ../common/aclocal.m4 changes.
1543 Tue Dec 9 11:30:48 1997 Nick Clifton <nickc@cygnus.com>
1545 * Makefile.in: Updated with changes from branch.
1547 * armemu.c: ditto these changes
1548 * armemu.h: ditto add support for
1549 * armos.c: ditto the Thumb instruction
1550 * armsupp.c: ditto set and the new v4
1551 * armvirt.c: ditto architecture.
1553 * thumbemu.c: New file from branch.
1556 Thu Dec 4 09:21:05 1997 Doug Evans <devans@canuck.cygnus.com>
1558 * configure: Regenerated to track ../common/aclocal.m4 changes.
1560 Thu Oct 30 13:54:06 1997 Nick Clifton <nickc@cygnus.com>
1562 * armos.c (ARMul_OSHandleSWI): Add support for GetEnv SWI. Patch
1563 from Tony Thompson at ARM: athompso@arm.com
1565 * wrapper.c (sim_create_inferior): Add code to create an execution
1566 environment. Patch from Tony Thompson at ARM: athompso@arm.com
1568 Wed Oct 22 14:43:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
1570 * wrapper.c (sim_load): Pass lma_p and sim_write args to
1573 Fri Oct 3 09:28:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
1575 * configure: Regenerated to track ../common/aclocal.m4 changes.
1577 Wed Sep 24 17:38:57 1997 Andrew Cagney <cagney@b1.cygnus.com>
1579 * configure: Regenerated to track ../common/aclocal.m4 changes.
1581 Tue Sep 23 11:04:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
1583 * configure: Regenerated to track ../common/aclocal.m4 changes.
1585 Mon Sep 22 11:46:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
1587 * configure: Regenerated to track ../common/aclocal.m4 changes.
1589 Fri Sep 19 17:45:25 1997 Andrew Cagney <cagney@b1.cygnus.com>
1591 * configure: Regenerated to track ../common/aclocal.m4 changes.
1593 Mon Sep 15 17:36:15 1997 Andrew Cagney <cagney@b1.cygnus.com>
1595 * configure: Regenerated to track ../common/aclocal.m4 changes.
1597 Thu Sep 4 17:21:23 1997 Doug Evans <dje@seba>
1599 * configure: Regenerated to track ../common/aclocal.m4 changes.
1601 Wed Aug 27 18:13:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
1603 * configure: Regenerated to track ../common/aclocal.m4 changes.
1606 Tue Aug 26 10:37:27 1997 Andrew Cagney <cagney@b1.cygnus.com>
1608 * wrapper.c (sim_kill): Delete.
1609 (sim_create_inferior): Add ABFD argument.
1610 (sim_load): Move setting of PC from here.
1611 (sim_create_inferior): To here.
1613 Mon Aug 25 17:50:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
1615 * configure: Regenerated to track ../common/aclocal.m4 changes.
1618 Mon Aug 25 15:35:45 1997 Andrew Cagney <cagney@b1.cygnus.com>
1620 * wrapper.c (sim_open): Add ABFD argument.
1622 Tue May 20 10:13:26 1997 Andrew Cagney <cagney@b1.cygnus.com>
1624 * wrapper.c (sim_open): Add callback argument.
1625 (sim_set_callbacks): Drop SIM_DESC argument.
1627 Thu Apr 24 00:39:51 1997 Doug Evans <dje@canuck.cygnus.com>
1629 * configure: Regenerated to track ../common/aclocal.m4 changes.
1631 Fri Apr 18 13:32:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
1633 * wrapper.c (sim_stop): Stub sim_stop function.
1635 Thu Apr 17 18:33:01 1997 Fred Fish <fnf@cygnus.com>
1637 * arminit.c (ARMul_NewState): Preinitialize the state to
1640 Thu Apr 17 02:39:02 1997 Doug Evans <dje@canuck.cygnus.com>
1642 * Makefile.in (SIM_OBJS): Add sim-load.o.
1643 * wrapper.c (sim_kind,myname): New static locals.
1644 (sim_open): Set sim_kind, myname.
1645 (sim_load): Call sim_load_file to do work. Set start address from bfd.
1646 (sim_create_inferior): Return SIM_RC. Delete start_address arg.
1648 Thu Apr 17 11:48:25 1997 Andrew Cagney <cagney@b1.cygnus.com>
1650 * wrapper.c (sim_trace): Update so that it matches prototype.
1652 Mon Apr 7 15:45:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1654 * configure: Regenerated to track ../common/aclocal.m4 changes.
1657 Mon Apr 7 12:01:17 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1659 * Makefile.in (armemu32.o): Replace $< with autoconf recommended
1661 (armemu26.o): Ditto.
1663 Wed Apr 2 15:06:28 1997 Doug Evans <dje@canuck.cygnus.com>
1665 * wrapper.c (sim_open): New arg `kind'.
1667 * configure: Regenerated to track ../common/aclocal.m4 changes.
1669 Wed Apr 2 14:50:44 1997 Ian Lance Taylor <ian@cygnus.com>
1671 * COPYING: Update FSF address.
1673 Wed Apr 2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1675 * configure: Regenerated to track ../common/aclocal.m4 changes.
1677 Wed Mar 19 01:14:00 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1679 * configure: Regenerated to track ../common/aclocal.m4 changes.
1681 Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1683 * configure: Re-generate.
1685 Fri Mar 14 10:34:11 1997 Michael Meissner <meissner@cygnus.com>
1687 * configure: Regenerate to track ../common/aclocal.m4 changes.
1689 Thu Mar 13 12:38:56 1997 Doug Evans <dje@canuck.cygnus.com>
1691 * wrapper.c (sim_open): Has result now.
1692 (sim_*): New SIM_DESC argument.
1694 Tue Feb 4 13:22:21 1997 Doug Evans <dje@canuck.cygnus.com>
1696 * Makefile.in (@COMMON_MAKEFILE_FRAG@): Use
1697 COMMON_{PRE,POST}_CONFIG_FRAG instead.
1698 * configure.in: sinclude ../common/aclocal.m4.
1699 * configure: Regenerated.
1701 Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com)
1703 * configure configure.in Makefile.in: Update to new configure
1704 scheme which is more compatible with WinGDB builds.
1705 * configure.in: Improve comment on how to run autoconf.
1706 * configure: Re-run autoconf to get new ../common/aclocal.m4.
1707 * Makefile.in: Use autoconf substitution to install common
1710 Wed Nov 20 01:05:10 1996 Doug Evans <dje@canuck.cygnus.com>
1712 * run.c: Deleted, use one in ../common now.
1713 * Makefile.in: Delete everything that's been moved to
1714 ../common/Make-common.in.
1716 * configure.in: Simplify using macros in ../common/aclocal.m4.
1717 * configure: Regenerated.
1718 * config.in: New file.
1719 * armos.c: #include config.h.
1720 * wrapper.c (mem_size): Value is in bytes now.
1721 (sim_callback): New global.
1722 (arm_sim_set_profile{,_size}): Delete.
1723 (arm_sim_set_mem_size): Rename to sim_size.
1724 (sim_do_command): Call printf_filtered via callback.
1725 (sim_set_callbacks): Record callback.
1727 Thu Oct 3 16:10:27 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1729 * Makefile.in (mostlyclean): Remove config.log.
1731 Wed Jun 26 12:17:24 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1733 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1734 INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1736 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1737 (AC_PROG_INSTALL): Added.
1738 * configure: Rebuilt.
1740 Wed Feb 21 12:14:31 1996 Ian Lance Taylor <ian@cygnus.com>
1742 * configure: Regenerate with autoconf 2.7.
1744 Fri Dec 15 16:27:30 1995 Ian Lance Taylor <ian@cygnus.com>
1746 * run.c (main): Use new bfd_big_endian macro.
1748 Mon Nov 20 17:40:38 1995 Doug Evans <dje@canuck.cygnus.com>
1750 * run.c: Include "getopt.h".
1752 (usage): Make static.
1753 (main): Call arm_sim_set_verbosity.
1754 Only load sections marked SEC_LOAD.
1755 * wrapper.c (mem_size, verbosity): New static global.
1756 (arm_sim_set_mem_size): Renamed from sim_size. Callers updated.
1757 (arm_sim_set_profile{,_size}): Renamed from sim_foo. Callers updated.
1759 Fri Nov 17 19:35:11 1995 Doug Evans <dje@canuck.cygnus.com>
1761 * armdefs.h (ARMul_State): New member `verbose'.
1762 * armrdi.c (ARMul_ConsolePrint): Add missing va_end.
1763 * run.c (verbose): Make global.
1764 * wrapper.c (init): Set state->verbose.
1765 (ARMul_ConsolePrint): Don't print anything if !verbose.
1767 Fri Oct 13 15:30:30 1995 Doug Evans <dje@canuck.cygnus.com>
1769 * armos.c: #include dbg_rdi.h.
1770 (ARMul_OSHandleSWI): Handle SWI_Breakpoint.
1771 * armos.h (SWI_Breakpoint): Define.
1772 * wrapper.c: #include armemu.h, dbg_rdi.h.
1774 (sim_resume): Use state->EndCondition to record stop state.
1775 Call FLUSHPIPE before returning.
1776 (sim_stop_reason): Determine reason from state->EndCondition.
1778 Fri Oct 13 15:04:05 1995 steve chamberlain <sac@slash.cygnus.com>
1780 * wrapper.c (sim_set_callbacks): New.
1782 Thu Sep 28 19:45:56 1995 Doug Evans <dje@deneb.cygnus.com>
1784 * armos.c (ARMul_OSHandleSWI): Result of read/write calls is
1785 number of bytes not read/written (or -1).
1787 Wed Sep 20 13:35:54 1995 Ian Lance Taylor <ian@cygnus.com>
1789 * Makefile.in (maintainer-clean): New synonym for realclean.
1791 Fri Sep 8 14:27:20 1995 Ian Lance Taylor <ian@cygnus.com>
1793 * configure.in: Remove AC_PROG_INSTALL.
1794 * configure: Rebuild.
1795 * Makefile.in (INSTALL): Revert to using install.sh.
1796 (INSTALL_PROGRAM, INSTALL_DATA): Set to $(INSTALL).
1797 (INSTALL_XFORM, INSTALL_XFORM1): Restore.
1798 (mostlyclean): Make the same as clean, not distclean.
1799 (clean): Remove config.log.
1800 (install): Don't install in $(tooldir).
1802 Thu Sep 7 12:00:17 1995 Doug Evans <dje@canuck.cygnus.com>
1804 (Try to) Update to new bfd autoconf scheme.
1805 * run.c: Don't include sysdep.h.
1806 * Makefile.in (INSTALL{,_PROGRAM,_DATA}): Use autoconf computed value.
1807 (CC, CFLAGS, AR, RANLIB): Likewise.
1808 (HDEFINES, TDEFINES): Define.
1809 (CC_FOR_BUILD): Delete.
1810 (host_makefile_frag): Delete.
1811 (Makefile): Don't depend on frags.
1812 * configure.in (sysdep.h): Don't create symlink.
1813 (host_makefile_frag, frags): Deleted.
1814 (CC, CFLAGS, AR, RANLIB, INSTALL): Compute values.
1815 * configure: Regenerated.
1817 Thu Aug 3 10:45:37 1995 Fred Fish <fnf@cygnus.com>
1819 * Update all FSF addresses except those in COPYING* files.
1821 Wed Jul 5 16:15:54 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1823 * Makefile.in (clean): Remove run, libsim.a.
1825 * Makefile.in, configure.in: converted to autoconf.
1826 * configure: New file, generated with autconf 2.4.
1830 Fri Jun 30 16:49:47 1995 Stan Shebs <shebs@andros.cygnus.com>
1832 * wrapper.c (sim_do_command): New function.
1834 Tue Jun 13 10:57:32 1995 Steve Chamberlain <sac@slash.cygnus.com>
1836 * armos.c (ARMul_OSHandleSWI): New version to work with
1839 Thu Jun 8 14:37:14 1995 Steve Chamberlain <sac@slash.cygnus.com>
1841 * run.c (main): Grab return value from right register.
1843 Wed May 24 14:37:31 1995 Steve Chamberlain <sac@slash.cygnus.com>