1 2012-03-24 Mike Frysinger <vapier@gentoo.org>
3 * aclocal.m4, config.in, configure: Regenerate.
5 2012-03-19 Robin Getz <robin.getz@analog.com>
6 Mike Frysinger <vapier@gentoo.org>
8 * bfin-sim.c (lshift): Add an overflow flag. Delete now unused
9 i, j, and tmp vars. Add a new v_i var. Split the overflow logic
10 out from the saturate logic. Do not set V ASTAT bits when working
12 (decode_ALU2op_0): Add new argument to lshift call.
13 (decode_LOGI2op_0, decode_dsp32shift_0, decode_dsp32shiftimm_0):
16 2012-03-18 Mike Frysinger <vapier@gentoo.org>
18 * dv-bfin_ebiu_amc.c (struct bfin_ebiu_amc): Add bank_base.
19 (bfin_ebiu_amc_write_amgctl): Replace BFIN_EBIU_AMC_BASE with
21 (bfin_ebiu_amc_finish): Assign BFIN_EBIU_AMC_BASE to amc->bank_base.
23 2012-03-18 Mike Frysinger <vapier@gentoo.org>
25 * dv-bfin_ebiu_amc.c (bfin_ebiu_amc_attach_address_callback): Use
26 ARRAY_SIZE rather than hardcoded constant.
28 2012-02-04 Mike Frysinger <vapier@gentoo.org>
30 * config.in: Regenerate.
31 * configure: Likewise.
32 * configure.ac: Add linux/types.h to AC_CHECK_HEADERS.
33 * dv-eth_phy.c: Check for HAVE_LINUX_TYPES_H, and delete __u16 and
34 _LINUX_TYPES_H defines.
36 2011-12-03 Mike Frysinger <vapier@gentoo.org>
38 * interp.c (bfin_syscall): Increase _tbuf storage. Declare new local
39 tstr buffer. Call cb_get_string on tstr when handling CB_SYS_stat64,
40 CB_SYS_lstat64, CB_SYS_open, CB_SYS_write, CB_SYS_unlink,
41 CB_SYS_truncate, CB_SYS_rename, CB_SYS_stat, CB_SYS_lstat. Include
42 tstr in the tbuf output.
44 2011-12-03 Mike Frysinger <vapier@gentoo.org>
46 * Makefile.in: Delete all dependency rules.
47 * aclocal.m4, configure: Regenerate.
49 2011-10-19 Mike Frysinger <vapier@gentoo.org>
51 * configure: Regenerate after common/acinclude.m4 update.
53 2011-10-17 Mike Frysinger <vapier@gentoo.org>
55 * configure.ac: Change include to common/acinclude.m4.
56 * aclocal.m4, configure: Regenerate.
58 2011-10-17 Mike Frysinger <vapier@gentoo.org>
60 * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER
61 call. Replace common.m4 include with SIM_AC_COMMON.
62 * configure: Regenerate.
64 2011-09-28 Mike Frysinger <vapier@gentoo.org>
66 * bfin-sim.c (decode_dsp32shift_0): Use STORE() for VIT_MAX insns.
68 2011-07-05 Mike Frysinger <vapier@gentoo.org>
70 * interp.c (sim_do_command): Delete.
72 2011-07-01 Mike Frysinger <vapier@gentoo.org>
74 * interp.c (cb_linux_stat_map_32, cb_linux_stat_map_64): Rename from
75 stat_map_32 and stat_map_64.
76 (cb_libgloss_stat_map_32): New stat map.
77 (stat_map_32, stat_map_64): New stat map pointers.
78 (bfin_user_init): Assign stat_map_32 to cb_linux_stat_map_32 and
79 stat_map_64 to cb_linux_stat_map_64.
80 (bfin_virtual_init): New function.
81 (sim_create_inferior): Call bfin_virtual_init for all other envs.
83 2011-06-22 Mike Frysinger <vapier@gentoo.org>
85 * interp.c (bfin_syscall): Delete old comment. Set dreg 1 to
86 sc.result2 and dreg 2 to sc.errcode.
88 2011-06-18 Robin Getz <robin.getz@analog.com>
90 * bfin-sim.c (decode_dsp32shift_0): Clear ASTAT[AV] if val is 0,
91 else set it. Set ASTAT[AVS] if val is 0. Do this for LSHIFT and
92 ASHIFT accumulator insns.
94 2011-06-18 Robin Getz <robin.getz@analog.com>
96 * bfin-sim.c (ashiftrt): If size is 40, do not call SET_ASTATREG.
99 2011-06-18 Robin Getz <robin.getz@analog.com>
101 * bfin-sim.c (decode_dsp32shift_0): Use get_unextended_acc
102 rather than get_extended_acc in LSHIFT insns.
104 2011-06-18 Robin Getz <robin.getz@analog.com>
106 * bfin-sim.c (decode_macfunc): Handle MM when mmod is M_TFU.
107 Check MM once when mmod is M_FU to match M_TFU better.
109 2011-06-18 Robin Getz <robin.getz@analog.com>
111 * bfin-sim.c (decode_dsp32shiftimm_0): When shift is greater than
112 32, perform a left shift. Update the corresponding AV bit. Set
113 AZ when the low 32bits are also zero.
115 2011-06-18 Robin Getz <robin.getz@analog.com>
117 * bfin-sim.c (decode_dsp32shiftimm_0): With left shift vector insns,
118 call lshift only when count is positive. Otherwise, call ashiftrt.
119 With arithmetic right shift insns, call ashiftrt when the value is
120 small enough, otherwise call lshift.
122 2011-06-18 Robin Getz <robin.getz@analog.com>
124 * bfin-sim.c (extract_mult): Call saturate_s16 directly when
125 mmod is M_IH rather than computing the result by hand.
127 2011-06-18 Robin Getz <robin.getz@analog.com>
129 * bfin-sim.c (decode_macfunc): Add nosat_acc to track acc value
130 before saturation, set sat when more cases saturate, and set the
131 overflow bit based on these results. For M_TFU, M_IU, M_FU, and
132 M_W32, change the max values compared against.
133 (decode_dsp32mac_0): Delete v_i and add v_0 and v_1. Pass v_1
134 when processing MAC1 and pass v_0 when processing MAC0. Combine
135 the results into the V/VS ASTAT bits.
137 2011-06-18 Robin Getz <robin.getz@analog.com>
139 * bfin-sim.c (extract_mult): Call saturate_s32 when MM is set
140 and mmod is M_IU. Call saturate_s16 when MM is set and mmod
143 2011-06-18 Robin Getz <robin.getz@analog.com>
145 * bfin-sim.c (decode_multfunc): Call new is_macmod_signed, and
146 allow MM to sign extend all the time.
147 (decode_macfunc): Likewise. Drop sign extension of unsigned
150 2011-06-18 Robin Getz <robin.getz@analog.com>
152 * bfin-sim.c (saturate_s40_astat): Change ">=" to ">".
153 (decode_macfunc): Likewise when mmod is M_IH.
155 2011-06-18 Mike Frysinger <vapier@gentoo.org>
157 * interp.c (sim_create_inferior): Change free to freeargv.
159 2011-06-04 Mike Frysinger <vapier@gentoo.org>
161 * machs.c (bf534_dev, bf537_dev): Add glue-or devices.
162 (bf537_port): Define applicable devices with PORT to the glue-or
163 devices instead of SIC.
164 (bfin_model_hw_tree_init): Drop old sim_hw_parse call for bfin_sic.
165 Only parse reg/type when the device has an address. Move the call
166 to dv_bfin_hw_port_parse up before slash check.
168 2011-06-04 Mike Frysinger <vapier@gentoo.org>
170 * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Move above the
171 BFIN_SIC_TO_CEC_PORTS definition.
172 (SIC_PORTS): New define.
173 (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
174 bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
175 bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
177 (bfin_sic1_ports, bfin_sic2_ports, bfin_sic3_ports,
178 bfin_sic_561_ports): Define new layouts with SIC_PORTS().
179 (bfin_sic_finish): Change reference to bfin_sic_50x_ports,
180 bfin_sic_51x_ports, bfin_sic_52x_ports, and bfin_sic_538_ports
181 to bfin_sic2_ports. Change reference to bfin_sic_533_ports,
182 bfin_sic_537_ports, and bfin_sic_59x_ports to bfin_sic1_ports.
183 Change reference to bfin_sic_54x_ports to bfin_sic3_ports.
184 * machs.c (bfin_port_layout): New structure.
185 (bfin_model_data): Add new "port" and "port_count" members.
186 (PORT, SIC): New defines.
187 (bf000_port, bf50x_port, bf51x_port, bf52x_port, bf533_port,
188 bf537_port, bf538_port, bf54x_port, bf561_port, bf592_port):
189 Move and redefine port layout from dv-bfin_sic.c to here.
190 (bf504_port, bf506_port, bf512_port, bf514_port, bf516_port,
191 bf518_port, bf522_port, bf523_port, bf524_port, bf525_port,
192 bf526_port, bf527_port, bf531_port, bf532_port, bf534_port,
193 bf536_port, bf539_port, bf542_port, bf544_port, bf547_port,
194 bf548_port, bf549_port): New defines.
195 (bfin_model_data): Link in new bfin_port_layout.port member.
196 (dv_bfin_hw_port_parse): New function.
197 (dv_bfin_hw_parse): Call new dv_bfin_hw_port_parse function.
198 (bfin_model_hw_tree_init): Replace calls to sim_hw_parse for
199 bfin_sic links with new dv_bfin_hw_port_parse function.
201 2011-06-03 Mike Frysinger <vapier@gentoo.org>
203 * dv-bfin_dma.c (bfin_dma_io_write_buffer): Fix indentation.
205 2011-05-25 Mike Frysinger <vapier@gentoo.org>
207 * sim-main.h (TRACE_SYSCALL): Change EVENTS to SYSCALL.
209 2011-05-25 Mike Frysinger <vapier@gentoo.org>
211 * dv-bfin_cec.h (BFIN_COREMMR_CEC_{BASE,SIZE}): Move to ...
212 * dv-bfin_ctimer.h (BFIN_COREMMR_CTIMER_{BASE,SIZE}): Move to ...
213 * dv-bfin_dma.h (BFIN_MMR_DMA_SIZE): Move to ...
214 * dv-bfin_dmac.h (BFIN_MMR_DMAC{0,1}_BASE): Move to ...
215 * dv-bfin_ebiu_amc.h (BF{IN,50X,54X}_MMR_EBIU_AMC_SIZE): Move to ...
216 * dv-bfin_ebiu_ddrc.h (BFIN_MMR_EBIU_DDRC_SIZE): Move to ...
217 * dv-bfin_ebiu_sdc.h (BFIN_MMR_EBIU_SDC_SIZE): Move to ...
218 * dv-bfin_emac.h (BFIN_MMR_EMAC_{BASE,SIZE}): Move to ...
219 * dv-bfin_eppi.h (BFIN_MMR_EPPI_SIZE): Move to ...
220 * dv-bfin_evt.h (BFIN_COREMMR_EVT_{BASE,SIZE}): Move to ...
221 * dv-bfin_gpio.h (BFIN_MMR_GPIO_SIZE): Move to ...
222 * dv-bfin_gptimer.h (BFIN_MMR_GPTIMER_SIZE): Move to ...
223 * dv-bfin_jtag.h (BFIN_COREMMR_JTAG_{BASE,SIZE}): Move to ...
224 * dv-bfin_mmu.h (BFIN_COREMMR_MMU_{BASE,SIZE}): Move to ...
225 * dv-bfin_nfc.h (BFIN_MMR_NFC_SIZE): Move to ...
226 * dv-bfin_otp.h (BFIN_MMR_OTP_SIZE): Move to ...
227 * dv-bfin_pfmon.h (BFIN_COREMMR_PFMON_{BASE,SIZE}): Move to ...
228 * dv-bfin_pll.h (BFIN_MMR_PLL_{BASE,SIZE}): Move to ...
229 * dv-bfin_ppi.h (BFIN_MMR_PPI_SIZE): Move to ...
230 * dv-bfin_rtc.h (BFIN_MMR_RTC_SIZE): Move to ...
231 * dv-bfin_sic.h (BFIN_MMR_SIC_{BASE,SIZE}): Move to ...
232 * dv-bfin_spi.h (BFIN_MMR_SPI_SIZE): Move to ...
233 * dv-bfin_trace.h (BFIN_COREMMR_TRACE_{BASE,SIZE}): Move to ...
234 * dv-bfin_twi.h (BFIN_MMR_TWI_SIZE): Move to ...
235 * dv-bfin_uart.h (BFIN_MMR_UART_SIZE): Move to ...
236 * dv-bfin_uart2.h (BFIN_MMR_UART2_SIZE): Move to ...
237 * dv-bfin_wdog.h (BFIN_MMR_WDOG_SIZE): Move to ...
238 * dv-bfin_wp.h (BFIN_COREMMR_WP_{BASE,SIZE}): Move to ...
240 * machs.c: Delete all dv-bfin_*.h includes except for cec/dmac.
242 2011-05-25 Mike Frysinger <vapier@gentoo.org>
244 * Makefile.in (dv-bfin_pfmon.o): New target.
245 * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_pfmon.
246 * configure: Regenerated.
247 * dv-bfin_pfmon.c, dv-bfin_pfmon.h: New files.
248 * machs.c: Add include new bfin_pfmon.h.
249 (bfin_core_dev): Add pfmon.
251 2011-05-25 Mike Frysinger <vapier@gentoo.org>
253 * machs.c (bf526_roms): Add a region with rev of 2.
254 (bf54x_roms): Add regions with rev of 4.
255 * bfroms/all.h: Include new bf526-0.2.h, bf54x-0.4.h, and
256 bf54x_l1-0.4.h headers.
257 * bfroms/bf526-0.2.h, bfroms/bf54x-0.4.h, bfroms/bf54x_l1-0.4.h:
260 2011-05-14 Mike Frysinger <vapier@gentoo.org>
262 * bfin-sim.c (decode_PushPopReg_0): Delete (grp == 1 && reg == 6)
265 2011-05-14 Mike Frysinger <vapier@gentoo.org>
267 * dv-bfin_uart.c (bfin_uart_write_byte): Add a mcr arg. Declare a
268 local uart. When LOOP_ENA is set in mcr, write to the saved byte
269 and count fields of the uart.
270 (bfin_uart_io_write_buffer): Pass uart->mcr to bfin_uart_write_byte
271 and bfin_uart_get_next_byte.
272 (bfin_uart_get_next_byte): Add a mcr arg. Move uart->saved_count
273 check first, and skip the remaining code when LOOP_ENA is set in mcr.
274 * dv-bfin_uart.h (bfin_uart_write_byte): Add an mcr argument.
275 (bfin_uart_get_next_byte): Likewise.
276 (XOFF, MRTS, RFIT, RFRT, LOOP_ENA, FCPOL, ARTS, ACTS): Define.
277 * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Padd uart->mcr when
278 calling bfin_uart_write_byte and bfin_uart_get_next_byte.
280 2011-05-09 Mike Frysinger <vapier@gentoo.org>
282 * dv-bfin_uart2.c (bfin_uart_io_read_buffer): Clear DR/THRE/TEMT bits
283 from uart->lsr before setting them.
285 2011-04-27 Mike Frysinger <vapier@gentoo.org>
287 * dv-bfin_dmac.c (bfin_dmac): Constify pmap array.
288 (bfin_dmac_50x_pmap, bfin_dmac_51x_pmap, bfin_dmac_52x_pmap,
289 bfin_dmac_533_pmap, bfin_dmac_537_pmap, bfin_dmac0_538_pmap,
290 bfin_dmac1_538_pmap, bfin_dmac0_54x_pmap, bfin_dmac1_54x_pmap,
291 bfin_dmac0_561_pmap, bfin_dmac1_561_pmap, bfin_dmac_59x_pmap):
294 2011-04-26 Mike Frysinger <vapier@gentoo.org>
296 * dv-bfin_gpio.c (bfin_gpio_forward_ouput): New function.
297 (bfin_gpio_io_write_buffer): Store the current port state into
298 "data", and call bfin_gpio_forward_ouput when the data or dir
300 (bfin_gpio_ports): Change p0..p15 to bidirect_port.
302 2011-04-26 Mike Frysinger <vapier@gentoo.org>
304 * dv-bfin_gpio.c (bfin_gpio): Add "int_state" member.
305 (bfin_gpio_forward_int, bfin_gpio_forward_ints): New functions.
306 (bfin_gpio_io_write_buffer): Call bfin_gpio_forward_int when the
307 mask a or mask b MMRs are written.
308 (bfin_gpio_port_event): When handling edge gpios, set the bit in
309 int_state, call bfin_gpio_forward_ints, and then clear the bit.
310 When handling level gpios, clear/set the bit in int_state rather
311 than returning immediately. Call bfin_gpio_forward_ints instead
312 of checking mask[ab] and calling HW_TRACE/hw_port_event directly.
314 2011-04-16 Mike Frysinger <vapier@gentoo.org>
316 * bfin-sim.c (decode_dsp32alu_0): Call STORE instead of SET_DREG for
317 BYTEOP2P, BYTEOP3P, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK, and
319 (decode_dsp32shift_0): Call STORE instead of SET_DREG for PACK,
320 BITMUX, EXTRACT, DEPOSIT, ALIGN8, ALIGN16, and ALIGN24.
322 2011-04-14 Mike Frysinger <vapier@gentoo.org>
324 * bfin-sim.c (decode_dsp32alu_0): Set DIS_ALGN_EXPT when handling
325 BYTEOP2P, BYTEOP3P, SAA, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK,
326 and BYTEUNPACK insns.
328 2011-04-11 Mike Frysinger <vapier@gentoo.org>
330 * dv-bfin_sic.c (bfin_sic_port_event): New helper function.
331 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
332 bfin_sic_54x_port_event, bfin_sic_561_port_event): Include level
333 in the trace output, and call the new bfin_sic_port_event func.
335 2011-04-11 Mike Frysinger <vapier@gentoo.org>
337 * dv-bfin_gpio.c (bfin_gpio_ports): Add p15.
339 2011-04-01 Mike Frysinger <vapier@gentoo.org>
341 * dv-bfin_otp.c (bfin_otp_ports): Declare.
342 (bfin_otp_finish): Call set_hw_ports with bfin_otp_ports.
344 2011-03-29 Mike Frysinger <vapier@gentoo.org>
346 * configure: Regenerate after common/aclocal.m4 changes.
348 2011-03-28 Robin Getz <robin.getz@analog.com>
350 * bfin-sim.c (decode_dsp32alu_0): Cast high 16bits of A0.W to bs16
351 and add to casted low 16bits of A0.L and store in val0. Cast high
352 16bits of A1.W to bs16 and add to casted low 16bits of A1.L and
353 store in val1. Delete bit checks of val0 and val1.
355 2011-03-26 Robin Getz <robin.getz@analog.com>
357 * bfin-sim.c (decode_dsp32alu_0): Set result to 0x7FFFFFFF when
358 the result was 0x80000000 for RND12 subtraction.
360 2011-03-26 Robin Getz <robin.getz@analog.com>
362 * bfin-sim.c (decode_dsp32alu_0): Set VS when V is set.
364 2011-03-24 Mike Frysinger <vapier@gentoo.org>
366 * dv-bfin_gpio.c (bfin_gpio_port_event): Call HW_TRACE at every
367 major code flow point.
368 * dv-bfin_sic.c (bfin_sic_forward_interrupts): Call HW_TRACE just
369 before calling hw_port_event on ourselves.
370 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
371 bfin_sic_54x_port_event, bfin_sic_561_port_event): Call HW_TRACE
372 at the start of the function.
374 2011-03-24 Mike Frysinger <vapier@gentoo.org>
376 * dv-bfin_gpio.c (bfin_gpio_port_event): Split dir/inen bit checking.
377 Normalize "level" to 0/1 values. Shift "level" over by "my_port".
378 Invert port->both bit check.
380 2011-03-24 Mike Frysinger <vapier@gentoo.org>
382 * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Subtract 2 from the
383 valuep pointer for clear MMRs, 4 for set MMRs, and 6 for toggle MMRs.
385 2011-03-23 Mike Frysinger <vapier@gentoo.org>
387 * TODO: Document some known SIC issues.
389 2011-03-23 Mike Frysinger <vapier@gentoo.org>
391 * devices.h (dv_w1c): Fix typos in documentation of "bits" arg.
392 * dv-bfin_cec.c (bfin_cec_io_write_buffer): Pass 0xffee to dv_w1c_4.
393 * dv-bfin_emac.c (bfin_emac_io_write_buffer): Pass 0xe1 to dv_w1c_4
394 for systat MMR and -1 to dv_w1c_4 for [rt]x_stky/mmc_[rt]irqs MMRs.
395 * dv-bfin_eppi.c (bfin_eppi_io_write_buffer): Pass 0x1ff to dv_w1c_2.
396 * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Invert bits to dv_w1c_2.
397 * dv-bfin_jtag.c (bfin_jtag_io_write_buffer): Invert bits to dv_w1c_4.
398 * dv-bfin_nfc.c (bfin_nfc_io_write_buffer): Invert bits to dv_w1c_2.
399 * dv-bfin_otp.c (bfin_otp_io_write_buffer): Invert bits to dv_w1c_2.
400 * dv-bfin_ppi.c (bfin_ppi_io_write_buffer): Invert bits to dv_w1c_2.
401 * dv-bfin_rtc.c (bfin_rtc_io_write_buffer): Invert bits to dv_w1c_2.
402 * dv-bfin_spi.c (bfin_spi_io_write_buffer): Invert bits to dv_w1c_2.
403 * dv-bfin_twi.c (bfin_twi_io_write_buffer): Invert bits to dv_w1c_2.
404 * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Invert bits to dv_w1c_2.
406 2011-03-23 Mike Frysinger <vapier@gentoo.org>
408 * dv-bfin_uart.h (TFI, BI, FE, PE, OE): Define.
410 2011-03-23 Mike Frysinger <vapier@gentoo.org>
412 * dv-bfin_twi.h (LOSTARB): Rename from LOSTARG.
414 2011-03-23 Robin Getz <robin.getz@analog.com>
416 * bfin-sim.c (decode_dsp32shift_0): Set acc0 to the unextended
417 value for the VIT_MAX insn, and mask off the result when done.
419 2011-03-23 Robin Getz <robin.getz@analog.com>
421 * bfin-sim.c (decode_dsp32alu_0): Set A1 to a1_lo when up_hi is false,
422 and set A0 to a0_lo when up_lo is false.
424 2011-03-23 Robin Getz <robin.getz@analog.com>
426 * bfin-sim.c (decode_dsp32alu_0): Call saturate_s40_astat instead of
427 saturate_s40, and use the v parameter to update the AV bit. Set the
428 AC bit only when the final result is 0.
430 2011-03-23 Mike Frysinger <vapier@gentoo.org>
432 * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Define.
433 (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
434 bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
435 bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
436 Encode ids with the ENC macro.
437 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
438 bfin_sic_54x_port_event, bfin_sic_561_port_event): Set idx
439 from my_port with DEC_SIC, and set bit from my_port with DEC_PIN.
440 (bfin_sic_533_port_event): Delete.
441 (bfin_sic_finish): Call set_hw_port_event with
442 bfin_sic_537_port_event for BF533 and BF59x targets.
444 2011-03-23 Robin Getz <robin.getz@analog.com>
446 * bfin-sim.c (decode_dsp32alu_0): Drop the src0/src1 check for
447 BYTEOP1P, BYTEOP2P, and BYTEOP3P insns.
449 2011-03-23 Mike Frysinger <vapier@gentoo.org>
451 * machs.c (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev,
452 bf533_dev, bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev):
453 Change bfin_gpio addresses from f/g/h to 5/6/7.
454 (bfin_model_hw_tree_init): Add the bfin_gpio address base to 'a'.
456 2011-03-17 Mike Frysinger <vapier@gentoo.org>
458 * configure.ac (AC_CHECK_FUNCS): Check for kill and pread.
459 * configure: Regenerate.
460 * config.in: Regenerate.
461 * interp.c (bfin_syscall): Check for HAVE_{KILL,PREAD} before using
464 2011-03-15 Mike Frysinger <vapier@gentoo.org>
466 * Makefile.in (dv-bfin_gpio.o): New target.
467 * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio.
468 * configure: Regenerate.
469 * dv-bfin_gpio.c, dv-bfin_gpio.h: New files.
470 * machs.c: Include dv-bfin_gpio.h.
471 (bf50x_mem, bf51x_mem, bf52x_mem, bf531_mem, bf532_mem, bf533_mem,
472 bf534_mem, bf536_mem, bf537_mem, bf538_mem, bf561_mem, bf592_mem):
473 Delete GPIO memory stubs.
474 (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, bf533_dev,
475 bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): Add GPIO
477 (bfin_model_hw_tree_init): Hook up GPIO interrupts to SIC.
479 2011-03-15 Mike Frysinger <vapier@gentoo.org>
481 * bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, bfroms/bf51x-0.1.h,
482 bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, bfroms/bf526-0.1.h,
483 bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, bfroms/bf527-0.2.h,
484 bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, bfroms/bf533-0.3.h,
485 bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, bfroms/bf537-0.3.h,
486 bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, bfroms/bf54x-0.1.h,
487 bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, bfroms/bf54x_l1-0.1.h,
488 bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, bfroms/bf59x-0.0.h,
489 bfroms/bf59x_l1-0.1.h, dv-bfin_cec.c, dv-bfin_ctimer.c,
490 dv-bfin_dma.c, dv-bfin_dmac.c, dv-bfin_ebiu_amc.c,
491 dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_sdc.c, dv-bfin_emac.c,
492 dv-bfin_eppi.c, dv-bfin_evt.c, dv-bfin_gptimer.c, dv-bfin_jtag.c,
493 dv-bfin_mmu.c, dv-bfin_nfc.c, dv-bfin_otp.c, dv-bfin_pll.c,
494 dv-bfin_ppi.c, dv-bfin_rtc.c, dv-bfin_sic.c, dv-bfin_spi.c,
495 dv-bfin_trace.c, dv-bfin_twi.c, dv-bfin_uart.c, dv-bfin_uart2.c,
496 dv-bfin_wdog.c, dv-bfin_wp.c, dv-eth_phy.c, gui.c,
497 linux-fixed-code.h, linux-targ-map.h, machs.c, Makefile.in: Fix style.
499 2011-03-15 Robin Getz <robin.getz@analog.com>
501 * bfin-sim.c (decode_dsp32alu_0): Set AZ based on val for 16bit adds
504 2011-03-15 Robin Getz <robin.getz@analog.com>
506 * bfin-sim.c (decode_macfunc): Move acc STOREs behind op != 3 check.
508 2011-03-15 Robin Getz <robin.getz@analog.com>
510 * bfin-sim.c (decode_macfunc): New neg parameter. Set when the
511 high bit is set after extract_mult.
512 (decode_dsp32mac_0): Declare n_1 and n_0. Pass to the decode_macfunc
513 functions. Use these to update the AN bit.
515 2011-03-15 Robin Getz <robin.getz@analog.com>
517 * bfin-sim.c (decode_dsp32mult_0): Declare v_i0 and v_i1. Pass to
518 the extract_mult functions. Include these when updating the V, VS,
521 2011-03-15 Robin Getz <robin.getz@analog.com>
523 * bfin-sim.c (astat_names): New global bit array.
524 (decode_CC2stat_0): Delete local astat_name and astat_names.
525 (decode_psedodbg_assert_0): Move hardcoded offset into a variable.
526 Print out ASTAT bit values when checking an ASTAT register.
528 2010-03-15 Robin Getz <robin.getz@analog.com>
530 * bfin-sim.c (extract_mult): Handle M_IU.
532 2011-03-05 Mike Frysinger <vapier@gentoo.org>
534 * Makefile.in, TODO, aclocal.m4, bfin-sim.c, bfin-sim.h,
535 bfroms/all.h, bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h,
536 bfroms/bf51x-0.1.h, bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h,
537 bfroms/bf526-0.1.h, bfroms/bf527-0.0.h, bfroms/bf527-0.1.h,
538 bfroms/bf527-0.2.h, bfroms/bf533-0.1.h, bfroms/bf533-0.2.h,
539 bfroms/bf533-0.3.h, bfroms/bf537-0.0.h, bfroms/bf537-0.1.h,
540 bfroms/bf537-0.3.h, bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h,
541 bfroms/bf54x-0.1.h, bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h,
542 bfroms/bf54x_l1-0.1.h, bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h,
543 bfroms/bf59x-0.0.h, bfroms/bf59x_l1-0.1.h, config.in, configure,
544 configure.ac, devices.c, devices.h, dv-bfin_cec.c, dv-bfin_cec.h,
545 dv-bfin_ctimer.c, dv-bfin_ctimer.h, dv-bfin_dma.c, dv-bfin_dma.h,
546 dv-bfin_dmac.c, dv-bfin_dmac.h, dv-bfin_ebiu_amc.c, dv-bfin_ebiu_amc.h,
547 dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_ddrc.h, dv-bfin_ebiu_sdc.c,
548 dv-bfin_ebiu_sdc.h, dv-bfin_emac.c, dv-bfin_emac.h, dv-bfin_eppi.c,
549 dv-bfin_eppi.h, dv-bfin_evt.c, dv-bfin_evt.h, dv-bfin_gptimer.c,
550 dv-bfin_gptimer.h, dv-bfin_jtag.c, dv-bfin_jtag.h, dv-bfin_mmu.c,
551 dv-bfin_mmu.h, dv-bfin_nfc.c, dv-bfin_nfc.h, dv-bfin_otp.c,
552 dv-bfin_otp.h, dv-bfin_pll.c, dv-bfin_pll.h, dv-bfin_ppi.c,
553 dv-bfin_ppi.h, dv-bfin_rtc.c, dv-bfin_rtc.h, dv-bfin_sic.c,
554 dv-bfin_sic.h, dv-bfin_spi.c, dv-bfin_spi.h, dv-bfin_trace.c,
555 dv-bfin_trace.h, dv-bfin_twi.c, dv-bfin_twi.h, dv-bfin_uart.c,
556 dv-bfin_uart.h, dv-bfin_uart2.c, dv-bfin_uart2.h, dv-bfin_wdog.c,
557 dv-bfin_wdog.h, dv-bfin_wp.c, dv-bfin_wp.h, dv-eth_phy.c, gui.c,
558 gui.h, insn_list.def, interp.c, linux-fixed-code.h, linux-fixed-code.s,
559 linux-targ-map.h, machs.c, machs.h, proc_list.def, sim-main.h,
560 tconfig.in: New Blackfin port.