1 2011-09-28 Mike Frysinger <vapier@gentoo.org>
3 * bfin-sim.c (decode_dsp32shift_0): Use STORE() for VIT_MAX insns.
5 2011-07-05 Mike Frysinger <vapier@gentoo.org>
7 * interp.c (sim_do_command): Delete.
9 2011-07-01 Mike Frysinger <vapier@gentoo.org>
11 * interp.c (cb_linux_stat_map_32, cb_linux_stat_map_64): Rename from
12 stat_map_32 and stat_map_64.
13 (cb_libgloss_stat_map_32): New stat map.
14 (stat_map_32, stat_map_64): New stat map pointers.
15 (bfin_user_init): Assign stat_map_32 to cb_linux_stat_map_32 and
16 stat_map_64 to cb_linux_stat_map_64.
17 (bfin_virtual_init): New function.
18 (sim_create_inferior): Call bfin_virtual_init for all other envs.
20 2011-06-22 Mike Frysinger <vapier@gentoo.org>
22 * interp.c (bfin_syscall): Delete old comment. Set dreg 1 to
23 sc.result2 and dreg 2 to sc.errcode.
25 2011-06-18 Robin Getz <robin.getz@analog.com>
27 * bfin-sim.c (decode_dsp32shift_0): Clear ASTAT[AV] if val is 0,
28 else set it. Set ASTAT[AVS] if val is 0. Do this for LSHIFT and
29 ASHIFT accumulator insns.
31 2011-06-18 Robin Getz <robin.getz@analog.com>
33 * bfin-sim.c (ashiftrt): If size is 40, do not call SET_ASTATREG.
36 2011-06-18 Robin Getz <robin.getz@analog.com>
38 * bfin-sim.c (decode_dsp32shift_0): Use get_unextended_acc
39 rather than get_extended_acc in LSHIFT insns.
41 2011-06-18 Robin Getz <robin.getz@analog.com>
43 * bfin-sim.c (decode_macfunc): Handle MM when mmod is M_TFU.
44 Check MM once when mmod is M_FU to match M_TFU better.
46 2011-06-18 Robin Getz <robin.getz@analog.com>
48 * bfin-sim.c (decode_dsp32shiftimm_0): When shift is greater than
49 32, perform a left shift. Update the corresponding AV bit. Set
50 AZ when the low 32bits are also zero.
52 2011-06-18 Robin Getz <robin.getz@analog.com>
54 * bfin-sim.c (decode_dsp32shiftimm_0): With left shift vector insns,
55 call lshift only when count is positive. Otherwise, call ashiftrt.
56 With arithmetic right shift insns, call ashiftrt when the value is
57 small enough, otherwise call lshift.
59 2011-06-18 Robin Getz <robin.getz@analog.com>
61 * bfin-sim.c (extract_mult): Call saturate_s16 directly when
62 mmod is M_IH rather than computing the result by hand.
64 2011-06-18 Robin Getz <robin.getz@analog.com>
66 * bfin-sim.c (decode_macfunc): Add nosat_acc to track acc value
67 before saturation, set sat when more cases saturate, and set the
68 overflow bit based on these results. For M_TFU, M_IU, M_FU, and
69 M_W32, change the max values compared against.
70 (decode_dsp32mac_0): Delete v_i and add v_0 and v_1. Pass v_1
71 when processing MAC1 and pass v_0 when processing MAC0. Combine
72 the results into the V/VS ASTAT bits.
74 2011-06-18 Robin Getz <robin.getz@analog.com>
76 * bfin-sim.c (extract_mult): Call saturate_s32 when MM is set
77 and mmod is M_IU. Call saturate_s16 when MM is set and mmod
80 2011-06-18 Robin Getz <robin.getz@analog.com>
82 * bfin-sim.c (decode_multfunc): Call new is_macmod_signed, and
83 allow MM to sign extend all the time.
84 (decode_macfunc): Likewise. Drop sign extension of unsigned
87 2011-06-18 Robin Getz <robin.getz@analog.com>
89 * bfin-sim.c (saturate_s40_astat): Change ">=" to ">".
90 (decode_macfunc): Likewise when mmod is M_IH.
92 2011-06-18 Mike Frysinger <vapier@gentoo.org>
94 * interp.c (sim_create_inferior): Change free to freeargv.
96 2011-06-04 Mike Frysinger <vapier@gentoo.org>
98 * machs.c (bf534_dev, bf537_dev): Add glue-or devices.
99 (bf537_port): Define applicable devices with PORT to the glue-or
100 devices instead of SIC.
101 (bfin_model_hw_tree_init): Drop old sim_hw_parse call for bfin_sic.
102 Only parse reg/type when the device has an address. Move the call
103 to dv_bfin_hw_port_parse up before slash check.
105 2011-06-04 Mike Frysinger <vapier@gentoo.org>
107 * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Move above the
108 BFIN_SIC_TO_CEC_PORTS definition.
109 (SIC_PORTS): New define.
110 (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
111 bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
112 bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
114 (bfin_sic1_ports, bfin_sic2_ports, bfin_sic3_ports,
115 bfin_sic_561_ports): Define new layouts with SIC_PORTS().
116 (bfin_sic_finish): Change reference to bfin_sic_50x_ports,
117 bfin_sic_51x_ports, bfin_sic_52x_ports, and bfin_sic_538_ports
118 to bfin_sic2_ports. Change reference to bfin_sic_533_ports,
119 bfin_sic_537_ports, and bfin_sic_59x_ports to bfin_sic1_ports.
120 Change reference to bfin_sic_54x_ports to bfin_sic3_ports.
121 * machs.c (bfin_port_layout): New structure.
122 (bfin_model_data): Add new "port" and "port_count" members.
123 (PORT, SIC): New defines.
124 (bf000_port, bf50x_port, bf51x_port, bf52x_port, bf533_port,
125 bf537_port, bf538_port, bf54x_port, bf561_port, bf592_port):
126 Move and redefine port layout from dv-bfin_sic.c to here.
127 (bf504_port, bf506_port, bf512_port, bf514_port, bf516_port,
128 bf518_port, bf522_port, bf523_port, bf524_port, bf525_port,
129 bf526_port, bf527_port, bf531_port, bf532_port, bf534_port,
130 bf536_port, bf539_port, bf542_port, bf544_port, bf547_port,
131 bf548_port, bf549_port): New defines.
132 (bfin_model_data): Link in new bfin_port_layout.port member.
133 (dv_bfin_hw_port_parse): New function.
134 (dv_bfin_hw_parse): Call new dv_bfin_hw_port_parse function.
135 (bfin_model_hw_tree_init): Replace calls to sim_hw_parse for
136 bfin_sic links with new dv_bfin_hw_port_parse function.
138 2011-06-03 Mike Frysinger <vapier@gentoo.org>
140 * dv-bfin_dma.c (bfin_dma_io_write_buffer): Fix indentation.
142 2011-05-25 Mike Frysinger <vapier@gentoo.org>
144 * sim-main.h (TRACE_SYSCALL): Change EVENTS to SYSCALL.
146 2011-05-25 Mike Frysinger <vapier@gentoo.org>
148 * dv-bfin_cec.h (BFIN_COREMMR_CEC_{BASE,SIZE}): Move to ...
149 * dv-bfin_ctimer.h (BFIN_COREMMR_CTIMER_{BASE,SIZE}): Move to ...
150 * dv-bfin_dma.h (BFIN_MMR_DMA_SIZE): Move to ...
151 * dv-bfin_dmac.h (BFIN_MMR_DMAC{0,1}_BASE): Move to ...
152 * dv-bfin_ebiu_amc.h (BF{IN,50X,54X}_MMR_EBIU_AMC_SIZE): Move to ...
153 * dv-bfin_ebiu_ddrc.h (BFIN_MMR_EBIU_DDRC_SIZE): Move to ...
154 * dv-bfin_ebiu_sdc.h (BFIN_MMR_EBIU_SDC_SIZE): Move to ...
155 * dv-bfin_emac.h (BFIN_MMR_EMAC_{BASE,SIZE}): Move to ...
156 * dv-bfin_eppi.h (BFIN_MMR_EPPI_SIZE): Move to ...
157 * dv-bfin_evt.h (BFIN_COREMMR_EVT_{BASE,SIZE}): Move to ...
158 * dv-bfin_gpio.h (BFIN_MMR_GPIO_SIZE): Move to ...
159 * dv-bfin_gptimer.h (BFIN_MMR_GPTIMER_SIZE): Move to ...
160 * dv-bfin_jtag.h (BFIN_COREMMR_JTAG_{BASE,SIZE}): Move to ...
161 * dv-bfin_mmu.h (BFIN_COREMMR_MMU_{BASE,SIZE}): Move to ...
162 * dv-bfin_nfc.h (BFIN_MMR_NFC_SIZE): Move to ...
163 * dv-bfin_otp.h (BFIN_MMR_OTP_SIZE): Move to ...
164 * dv-bfin_pfmon.h (BFIN_COREMMR_PFMON_{BASE,SIZE}): Move to ...
165 * dv-bfin_pll.h (BFIN_MMR_PLL_{BASE,SIZE}): Move to ...
166 * dv-bfin_ppi.h (BFIN_MMR_PPI_SIZE): Move to ...
167 * dv-bfin_rtc.h (BFIN_MMR_RTC_SIZE): Move to ...
168 * dv-bfin_sic.h (BFIN_MMR_SIC_{BASE,SIZE}): Move to ...
169 * dv-bfin_spi.h (BFIN_MMR_SPI_SIZE): Move to ...
170 * dv-bfin_trace.h (BFIN_COREMMR_TRACE_{BASE,SIZE}): Move to ...
171 * dv-bfin_twi.h (BFIN_MMR_TWI_SIZE): Move to ...
172 * dv-bfin_uart.h (BFIN_MMR_UART_SIZE): Move to ...
173 * dv-bfin_uart2.h (BFIN_MMR_UART2_SIZE): Move to ...
174 * dv-bfin_wdog.h (BFIN_MMR_WDOG_SIZE): Move to ...
175 * dv-bfin_wp.h (BFIN_COREMMR_WP_{BASE,SIZE}): Move to ...
177 * machs.c: Delete all dv-bfin_*.h includes except for cec/dmac.
179 2011-05-25 Mike Frysinger <vapier@gentoo.org>
181 * Makefile.in (dv-bfin_pfmon.o): New target.
182 * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_pfmon.
183 * configure: Regenerated.
184 * dv-bfin_pfmon.c, dv-bfin_pfmon.h: New files.
185 * machs.c: Add include new bfin_pfmon.h.
186 (bfin_core_dev): Add pfmon.
188 2011-05-25 Mike Frysinger <vapier@gentoo.org>
190 * machs.c (bf526_roms): Add a region with rev of 2.
191 (bf54x_roms): Add regions with rev of 4.
192 * bfroms/all.h: Include new bf526-0.2.h, bf54x-0.4.h, and
193 bf54x_l1-0.4.h headers.
194 * bfroms/bf526-0.2.h, bfroms/bf54x-0.4.h, bfroms/bf54x_l1-0.4.h:
197 2011-05-14 Mike Frysinger <vapier@gentoo.org>
199 * bfin-sim.c (decode_PushPopReg_0): Delete (grp == 1 && reg == 6)
202 2011-05-14 Mike Frysinger <vapier@gentoo.org>
204 * dv-bfin_uart.c (bfin_uart_write_byte): Add a mcr arg. Declare a
205 local uart. When LOOP_ENA is set in mcr, write to the saved byte
206 and count fields of the uart.
207 (bfin_uart_io_write_buffer): Pass uart->mcr to bfin_uart_write_byte
208 and bfin_uart_get_next_byte.
209 (bfin_uart_get_next_byte): Add a mcr arg. Move uart->saved_count
210 check first, and skip the remaining code when LOOP_ENA is set in mcr.
211 * dv-bfin_uart.h (bfin_uart_write_byte): Add an mcr argument.
212 (bfin_uart_get_next_byte): Likewise.
213 (XOFF, MRTS, RFIT, RFRT, LOOP_ENA, FCPOL, ARTS, ACTS): Define.
214 * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Padd uart->mcr when
215 calling bfin_uart_write_byte and bfin_uart_get_next_byte.
217 2011-05-09 Mike Frysinger <vapier@gentoo.org>
219 * dv-bfin_uart2.c (bfin_uart_io_read_buffer): Clear DR/THRE/TEMT bits
220 from uart->lsr before setting them.
222 2011-04-27 Mike Frysinger <vapier@gentoo.org>
224 * dv-bfin_dmac.c (bfin_dmac): Constify pmap array.
225 (bfin_dmac_50x_pmap, bfin_dmac_51x_pmap, bfin_dmac_52x_pmap,
226 bfin_dmac_533_pmap, bfin_dmac_537_pmap, bfin_dmac0_538_pmap,
227 bfin_dmac1_538_pmap, bfin_dmac0_54x_pmap, bfin_dmac1_54x_pmap,
228 bfin_dmac0_561_pmap, bfin_dmac1_561_pmap, bfin_dmac_59x_pmap):
231 2011-04-26 Mike Frysinger <vapier@gentoo.org>
233 * dv-bfin_gpio.c (bfin_gpio_forward_ouput): New function.
234 (bfin_gpio_io_write_buffer): Store the current port state into
235 "data", and call bfin_gpio_forward_ouput when the data or dir
237 (bfin_gpio_ports): Change p0..p15 to bidirect_port.
239 2011-04-26 Mike Frysinger <vapier@gentoo.org>
241 * dv-bfin_gpio.c (bfin_gpio): Add "int_state" member.
242 (bfin_gpio_forward_int, bfin_gpio_forward_ints): New functions.
243 (bfin_gpio_io_write_buffer): Call bfin_gpio_forward_int when the
244 mask a or mask b MMRs are written.
245 (bfin_gpio_port_event): When handling edge gpios, set the bit in
246 int_state, call bfin_gpio_forward_ints, and then clear the bit.
247 When handling level gpios, clear/set the bit in int_state rather
248 than returning immediately. Call bfin_gpio_forward_ints instead
249 of checking mask[ab] and calling HW_TRACE/hw_port_event directly.
251 2011-04-16 Mike Frysinger <vapier@gentoo.org>
253 * bfin-sim.c (decode_dsp32alu_0): Call STORE instead of SET_DREG for
254 BYTEOP2P, BYTEOP3P, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK, and
256 (decode_dsp32shift_0): Call STORE instead of SET_DREG for PACK,
257 BITMUX, EXTRACT, DEPOSIT, ALIGN8, ALIGN16, and ALIGN24.
259 2011-04-14 Mike Frysinger <vapier@gentoo.org>
261 * bfin-sim.c (decode_dsp32alu_0): Set DIS_ALGN_EXPT when handling
262 BYTEOP2P, BYTEOP3P, SAA, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK,
263 and BYTEUNPACK insns.
265 2011-04-11 Mike Frysinger <vapier@gentoo.org>
267 * dv-bfin_sic.c (bfin_sic_port_event): New helper function.
268 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
269 bfin_sic_54x_port_event, bfin_sic_561_port_event): Include level
270 in the trace output, and call the new bfin_sic_port_event func.
272 2011-04-11 Mike Frysinger <vapier@gentoo.org>
274 * dv-bfin_gpio.c (bfin_gpio_ports): Add p15.
276 2011-04-01 Mike Frysinger <vapier@gentoo.org>
278 * dv-bfin_otp.c (bfin_otp_ports): Declare.
279 (bfin_otp_finish): Call set_hw_ports with bfin_otp_ports.
281 2011-03-29 Mike Frysinger <vapier@gentoo.org>
283 * configure: Regenerate after common/aclocal.m4 changes.
285 2011-03-28 Robin Getz <robin.getz@analog.com>
287 * bfin-sim.c (decode_dsp32alu_0): Cast high 16bits of A0.W to bs16
288 and add to casted low 16bits of A0.L and store in val0. Cast high
289 16bits of A1.W to bs16 and add to casted low 16bits of A1.L and
290 store in val1. Delete bit checks of val0 and val1.
292 2011-03-26 Robin Getz <robin.getz@analog.com>
294 * bfin-sim.c (decode_dsp32alu_0): Set result to 0x7FFFFFFF when
295 the result was 0x80000000 for RND12 subtraction.
297 2011-03-26 Robin Getz <robin.getz@analog.com>
299 * bfin-sim.c (decode_dsp32alu_0): Set VS when V is set.
301 2011-03-24 Mike Frysinger <vapier@gentoo.org>
303 * dv-bfin_gpio.c (bfin_gpio_port_event): Call HW_TRACE at every
304 major code flow point.
305 * dv-bfin_sic.c (bfin_sic_forward_interrupts): Call HW_TRACE just
306 before calling hw_port_event on ourselves.
307 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
308 bfin_sic_54x_port_event, bfin_sic_561_port_event): Call HW_TRACE
309 at the start of the function.
311 2011-03-24 Mike Frysinger <vapier@gentoo.org>
313 * dv-bfin_gpio.c (bfin_gpio_port_event): Split dir/inen bit checking.
314 Normalize "level" to 0/1 values. Shift "level" over by "my_port".
315 Invert port->both bit check.
317 2011-03-24 Mike Frysinger <vapier@gentoo.org>
319 * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Subtract 2 from the
320 valuep pointer for clear MMRs, 4 for set MMRs, and 6 for toggle MMRs.
322 2011-03-23 Mike Frysinger <vapier@gentoo.org>
324 * TODO: Document some known SIC issues.
326 2011-03-23 Mike Frysinger <vapier@gentoo.org>
328 * devices.h (dv_w1c): Fix typos in documentation of "bits" arg.
329 * dv-bfin_cec.c (bfin_cec_io_write_buffer): Pass 0xffee to dv_w1c_4.
330 * dv-bfin_emac.c (bfin_emac_io_write_buffer): Pass 0xe1 to dv_w1c_4
331 for systat MMR and -1 to dv_w1c_4 for [rt]x_stky/mmc_[rt]irqs MMRs.
332 * dv-bfin_eppi.c (bfin_eppi_io_write_buffer): Pass 0x1ff to dv_w1c_2.
333 * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Invert bits to dv_w1c_2.
334 * dv-bfin_jtag.c (bfin_jtag_io_write_buffer): Invert bits to dv_w1c_4.
335 * dv-bfin_nfc.c (bfin_nfc_io_write_buffer): Invert bits to dv_w1c_2.
336 * dv-bfin_otp.c (bfin_otp_io_write_buffer): Invert bits to dv_w1c_2.
337 * dv-bfin_ppi.c (bfin_ppi_io_write_buffer): Invert bits to dv_w1c_2.
338 * dv-bfin_rtc.c (bfin_rtc_io_write_buffer): Invert bits to dv_w1c_2.
339 * dv-bfin_spi.c (bfin_spi_io_write_buffer): Invert bits to dv_w1c_2.
340 * dv-bfin_twi.c (bfin_twi_io_write_buffer): Invert bits to dv_w1c_2.
341 * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Invert bits to dv_w1c_2.
343 2011-03-23 Mike Frysinger <vapier@gentoo.org>
345 * dv-bfin_uart.h (TFI, BI, FE, PE, OE): Define.
347 2011-03-23 Mike Frysinger <vapier@gentoo.org>
349 * dv-bfin_twi.h (LOSTARB): Rename from LOSTARG.
351 2011-03-23 Robin Getz <robin.getz@analog.com>
353 * bfin-sim.c (decode_dsp32shift_0): Set acc0 to the unextended
354 value for the VIT_MAX insn, and mask off the result when done.
356 2011-03-23 Robin Getz <robin.getz@analog.com>
358 * bfin-sim.c (decode_dsp32alu_0): Set A1 to a1_lo when up_hi is false,
359 and set A0 to a0_lo when up_lo is false.
361 2011-03-23 Robin Getz <robin.getz@analog.com>
363 * bfin-sim.c (decode_dsp32alu_0): Call saturate_s40_astat instead of
364 saturate_s40, and use the v parameter to update the AV bit. Set the
365 AC bit only when the final result is 0.
367 2011-03-23 Mike Frysinger <vapier@gentoo.org>
369 * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Define.
370 (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
371 bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
372 bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
373 Encode ids with the ENC macro.
374 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
375 bfin_sic_54x_port_event, bfin_sic_561_port_event): Set idx
376 from my_port with DEC_SIC, and set bit from my_port with DEC_PIN.
377 (bfin_sic_533_port_event): Delete.
378 (bfin_sic_finish): Call set_hw_port_event with
379 bfin_sic_537_port_event for BF533 and BF59x targets.
381 2011-03-23 Robin Getz <robin.getz@analog.com>
383 * bfin-sim.c (decode_dsp32alu_0): Drop the src0/src1 check for
384 BYTEOP1P, BYTEOP2P, and BYTEOP3P insns.
386 2011-03-23 Mike Frysinger <vapier@gentoo.org>
388 * machs.c (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev,
389 bf533_dev, bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev):
390 Change bfin_gpio addresses from f/g/h to 5/6/7.
391 (bfin_model_hw_tree_init): Add the bfin_gpio address base to 'a'.
393 2011-03-17 Mike Frysinger <vapier@gentoo.org>
395 * configure.ac (AC_CHECK_FUNCS): Check for kill and pread.
396 * configure: Regenerate.
397 * config.in: Regenerate.
398 * interp.c (bfin_syscall): Check for HAVE_{KILL,PREAD} before using
401 2011-03-15 Mike Frysinger <vapier@gentoo.org>
403 * Makefile.in (dv-bfin_gpio.o): New target.
404 * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio.
405 * configure: Regenerate.
406 * dv-bfin_gpio.c, dv-bfin_gpio.h: New files.
407 * machs.c: Include dv-bfin_gpio.h.
408 (bf50x_mem, bf51x_mem, bf52x_mem, bf531_mem, bf532_mem, bf533_mem,
409 bf534_mem, bf536_mem, bf537_mem, bf538_mem, bf561_mem, bf592_mem):
410 Delete GPIO memory stubs.
411 (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, bf533_dev,
412 bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): Add GPIO
414 (bfin_model_hw_tree_init): Hook up GPIO interrupts to SIC.
416 2011-03-15 Mike Frysinger <vapier@gentoo.org>
418 * bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, bfroms/bf51x-0.1.h,
419 bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, bfroms/bf526-0.1.h,
420 bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, bfroms/bf527-0.2.h,
421 bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, bfroms/bf533-0.3.h,
422 bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, bfroms/bf537-0.3.h,
423 bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, bfroms/bf54x-0.1.h,
424 bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, bfroms/bf54x_l1-0.1.h,
425 bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, bfroms/bf59x-0.0.h,
426 bfroms/bf59x_l1-0.1.h, dv-bfin_cec.c, dv-bfin_ctimer.c,
427 dv-bfin_dma.c, dv-bfin_dmac.c, dv-bfin_ebiu_amc.c,
428 dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_sdc.c, dv-bfin_emac.c,
429 dv-bfin_eppi.c, dv-bfin_evt.c, dv-bfin_gptimer.c, dv-bfin_jtag.c,
430 dv-bfin_mmu.c, dv-bfin_nfc.c, dv-bfin_otp.c, dv-bfin_pll.c,
431 dv-bfin_ppi.c, dv-bfin_rtc.c, dv-bfin_sic.c, dv-bfin_spi.c,
432 dv-bfin_trace.c, dv-bfin_twi.c, dv-bfin_uart.c, dv-bfin_uart2.c,
433 dv-bfin_wdog.c, dv-bfin_wp.c, dv-eth_phy.c, gui.c,
434 linux-fixed-code.h, linux-targ-map.h, machs.c, Makefile.in: Fix style.
436 2011-03-15 Robin Getz <robin.getz@analog.com>
438 * bfin-sim.c (decode_dsp32alu_0): Set AZ based on val for 16bit adds
441 2011-03-15 Robin Getz <robin.getz@analog.com>
443 * bfin-sim.c (decode_macfunc): Move acc STOREs behind op != 3 check.
445 2011-03-15 Robin Getz <robin.getz@analog.com>
447 * bfin-sim.c (decode_macfunc): New neg parameter. Set when the
448 high bit is set after extract_mult.
449 (decode_dsp32mac_0): Declare n_1 and n_0. Pass to the decode_macfunc
450 functions. Use these to update the AN bit.
452 2011-03-15 Robin Getz <robin.getz@analog.com>
454 * bfin-sim.c (decode_dsp32mult_0): Declare v_i0 and v_i1. Pass to
455 the extract_mult functions. Include these when updating the V, VS,
458 2011-03-15 Robin Getz <robin.getz@analog.com>
460 * bfin-sim.c (astat_names): New global bit array.
461 (decode_CC2stat_0): Delete local astat_name and astat_names.
462 (decode_psedodbg_assert_0): Move hardcoded offset into a variable.
463 Print out ASTAT bit values when checking an ASTAT register.
465 2010-03-15 Robin Getz <robin.getz@analog.com>
467 * bfin-sim.c (extract_mult): Handle M_IU.
469 2011-03-05 Mike Frysinger <vapier@gentoo.org>
471 * Makefile.in, TODO, aclocal.m4, bfin-sim.c, bfin-sim.h,
472 bfroms/all.h, bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h,
473 bfroms/bf51x-0.1.h, bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h,
474 bfroms/bf526-0.1.h, bfroms/bf527-0.0.h, bfroms/bf527-0.1.h,
475 bfroms/bf527-0.2.h, bfroms/bf533-0.1.h, bfroms/bf533-0.2.h,
476 bfroms/bf533-0.3.h, bfroms/bf537-0.0.h, bfroms/bf537-0.1.h,
477 bfroms/bf537-0.3.h, bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h,
478 bfroms/bf54x-0.1.h, bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h,
479 bfroms/bf54x_l1-0.1.h, bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h,
480 bfroms/bf59x-0.0.h, bfroms/bf59x_l1-0.1.h, config.in, configure,
481 configure.ac, devices.c, devices.h, dv-bfin_cec.c, dv-bfin_cec.h,
482 dv-bfin_ctimer.c, dv-bfin_ctimer.h, dv-bfin_dma.c, dv-bfin_dma.h,
483 dv-bfin_dmac.c, dv-bfin_dmac.h, dv-bfin_ebiu_amc.c, dv-bfin_ebiu_amc.h,
484 dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_ddrc.h, dv-bfin_ebiu_sdc.c,
485 dv-bfin_ebiu_sdc.h, dv-bfin_emac.c, dv-bfin_emac.h, dv-bfin_eppi.c,
486 dv-bfin_eppi.h, dv-bfin_evt.c, dv-bfin_evt.h, dv-bfin_gptimer.c,
487 dv-bfin_gptimer.h, dv-bfin_jtag.c, dv-bfin_jtag.h, dv-bfin_mmu.c,
488 dv-bfin_mmu.h, dv-bfin_nfc.c, dv-bfin_nfc.h, dv-bfin_otp.c,
489 dv-bfin_otp.h, dv-bfin_pll.c, dv-bfin_pll.h, dv-bfin_ppi.c,
490 dv-bfin_ppi.h, dv-bfin_rtc.c, dv-bfin_rtc.h, dv-bfin_sic.c,
491 dv-bfin_sic.h, dv-bfin_spi.c, dv-bfin_spi.h, dv-bfin_trace.c,
492 dv-bfin_trace.h, dv-bfin_twi.c, dv-bfin_twi.h, dv-bfin_uart.c,
493 dv-bfin_uart.h, dv-bfin_uart2.c, dv-bfin_uart2.h, dv-bfin_wdog.c,
494 dv-bfin_wdog.h, dv-bfin_wp.c, dv-bfin_wp.h, dv-eth_phy.c, gui.c,
495 gui.h, insn_list.def, interp.c, linux-fixed-code.h, linux-fixed-code.s,
496 linux-targ-map.h, machs.c, machs.h, proc_list.def, sim-main.h,
497 tconfig.in: New Blackfin port.