1 2011-10-19 Mike Frysinger <vapier@gentoo.org>
3 * configure: Regenerate after common/acinclude.m4 update.
5 2011-10-17 Mike Frysinger <vapier@gentoo.org>
7 * configure.ac: Change include to common/acinclude.m4.
8 * aclocal.m4, configure: Regenerate.
10 2011-10-17 Mike Frysinger <vapier@gentoo.org>
12 * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER
13 call. Replace common.m4 include with SIM_AC_COMMON.
14 * configure: Regenerate.
16 2011-09-28 Mike Frysinger <vapier@gentoo.org>
18 * bfin-sim.c (decode_dsp32shift_0): Use STORE() for VIT_MAX insns.
20 2011-07-05 Mike Frysinger <vapier@gentoo.org>
22 * interp.c (sim_do_command): Delete.
24 2011-07-01 Mike Frysinger <vapier@gentoo.org>
26 * interp.c (cb_linux_stat_map_32, cb_linux_stat_map_64): Rename from
27 stat_map_32 and stat_map_64.
28 (cb_libgloss_stat_map_32): New stat map.
29 (stat_map_32, stat_map_64): New stat map pointers.
30 (bfin_user_init): Assign stat_map_32 to cb_linux_stat_map_32 and
31 stat_map_64 to cb_linux_stat_map_64.
32 (bfin_virtual_init): New function.
33 (sim_create_inferior): Call bfin_virtual_init for all other envs.
35 2011-06-22 Mike Frysinger <vapier@gentoo.org>
37 * interp.c (bfin_syscall): Delete old comment. Set dreg 1 to
38 sc.result2 and dreg 2 to sc.errcode.
40 2011-06-18 Robin Getz <robin.getz@analog.com>
42 * bfin-sim.c (decode_dsp32shift_0): Clear ASTAT[AV] if val is 0,
43 else set it. Set ASTAT[AVS] if val is 0. Do this for LSHIFT and
44 ASHIFT accumulator insns.
46 2011-06-18 Robin Getz <robin.getz@analog.com>
48 * bfin-sim.c (ashiftrt): If size is 40, do not call SET_ASTATREG.
51 2011-06-18 Robin Getz <robin.getz@analog.com>
53 * bfin-sim.c (decode_dsp32shift_0): Use get_unextended_acc
54 rather than get_extended_acc in LSHIFT insns.
56 2011-06-18 Robin Getz <robin.getz@analog.com>
58 * bfin-sim.c (decode_macfunc): Handle MM when mmod is M_TFU.
59 Check MM once when mmod is M_FU to match M_TFU better.
61 2011-06-18 Robin Getz <robin.getz@analog.com>
63 * bfin-sim.c (decode_dsp32shiftimm_0): When shift is greater than
64 32, perform a left shift. Update the corresponding AV bit. Set
65 AZ when the low 32bits are also zero.
67 2011-06-18 Robin Getz <robin.getz@analog.com>
69 * bfin-sim.c (decode_dsp32shiftimm_0): With left shift vector insns,
70 call lshift only when count is positive. Otherwise, call ashiftrt.
71 With arithmetic right shift insns, call ashiftrt when the value is
72 small enough, otherwise call lshift.
74 2011-06-18 Robin Getz <robin.getz@analog.com>
76 * bfin-sim.c (extract_mult): Call saturate_s16 directly when
77 mmod is M_IH rather than computing the result by hand.
79 2011-06-18 Robin Getz <robin.getz@analog.com>
81 * bfin-sim.c (decode_macfunc): Add nosat_acc to track acc value
82 before saturation, set sat when more cases saturate, and set the
83 overflow bit based on these results. For M_TFU, M_IU, M_FU, and
84 M_W32, change the max values compared against.
85 (decode_dsp32mac_0): Delete v_i and add v_0 and v_1. Pass v_1
86 when processing MAC1 and pass v_0 when processing MAC0. Combine
87 the results into the V/VS ASTAT bits.
89 2011-06-18 Robin Getz <robin.getz@analog.com>
91 * bfin-sim.c (extract_mult): Call saturate_s32 when MM is set
92 and mmod is M_IU. Call saturate_s16 when MM is set and mmod
95 2011-06-18 Robin Getz <robin.getz@analog.com>
97 * bfin-sim.c (decode_multfunc): Call new is_macmod_signed, and
98 allow MM to sign extend all the time.
99 (decode_macfunc): Likewise. Drop sign extension of unsigned
102 2011-06-18 Robin Getz <robin.getz@analog.com>
104 * bfin-sim.c (saturate_s40_astat): Change ">=" to ">".
105 (decode_macfunc): Likewise when mmod is M_IH.
107 2011-06-18 Mike Frysinger <vapier@gentoo.org>
109 * interp.c (sim_create_inferior): Change free to freeargv.
111 2011-06-04 Mike Frysinger <vapier@gentoo.org>
113 * machs.c (bf534_dev, bf537_dev): Add glue-or devices.
114 (bf537_port): Define applicable devices with PORT to the glue-or
115 devices instead of SIC.
116 (bfin_model_hw_tree_init): Drop old sim_hw_parse call for bfin_sic.
117 Only parse reg/type when the device has an address. Move the call
118 to dv_bfin_hw_port_parse up before slash check.
120 2011-06-04 Mike Frysinger <vapier@gentoo.org>
122 * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Move above the
123 BFIN_SIC_TO_CEC_PORTS definition.
124 (SIC_PORTS): New define.
125 (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
126 bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
127 bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
129 (bfin_sic1_ports, bfin_sic2_ports, bfin_sic3_ports,
130 bfin_sic_561_ports): Define new layouts with SIC_PORTS().
131 (bfin_sic_finish): Change reference to bfin_sic_50x_ports,
132 bfin_sic_51x_ports, bfin_sic_52x_ports, and bfin_sic_538_ports
133 to bfin_sic2_ports. Change reference to bfin_sic_533_ports,
134 bfin_sic_537_ports, and bfin_sic_59x_ports to bfin_sic1_ports.
135 Change reference to bfin_sic_54x_ports to bfin_sic3_ports.
136 * machs.c (bfin_port_layout): New structure.
137 (bfin_model_data): Add new "port" and "port_count" members.
138 (PORT, SIC): New defines.
139 (bf000_port, bf50x_port, bf51x_port, bf52x_port, bf533_port,
140 bf537_port, bf538_port, bf54x_port, bf561_port, bf592_port):
141 Move and redefine port layout from dv-bfin_sic.c to here.
142 (bf504_port, bf506_port, bf512_port, bf514_port, bf516_port,
143 bf518_port, bf522_port, bf523_port, bf524_port, bf525_port,
144 bf526_port, bf527_port, bf531_port, bf532_port, bf534_port,
145 bf536_port, bf539_port, bf542_port, bf544_port, bf547_port,
146 bf548_port, bf549_port): New defines.
147 (bfin_model_data): Link in new bfin_port_layout.port member.
148 (dv_bfin_hw_port_parse): New function.
149 (dv_bfin_hw_parse): Call new dv_bfin_hw_port_parse function.
150 (bfin_model_hw_tree_init): Replace calls to sim_hw_parse for
151 bfin_sic links with new dv_bfin_hw_port_parse function.
153 2011-06-03 Mike Frysinger <vapier@gentoo.org>
155 * dv-bfin_dma.c (bfin_dma_io_write_buffer): Fix indentation.
157 2011-05-25 Mike Frysinger <vapier@gentoo.org>
159 * sim-main.h (TRACE_SYSCALL): Change EVENTS to SYSCALL.
161 2011-05-25 Mike Frysinger <vapier@gentoo.org>
163 * dv-bfin_cec.h (BFIN_COREMMR_CEC_{BASE,SIZE}): Move to ...
164 * dv-bfin_ctimer.h (BFIN_COREMMR_CTIMER_{BASE,SIZE}): Move to ...
165 * dv-bfin_dma.h (BFIN_MMR_DMA_SIZE): Move to ...
166 * dv-bfin_dmac.h (BFIN_MMR_DMAC{0,1}_BASE): Move to ...
167 * dv-bfin_ebiu_amc.h (BF{IN,50X,54X}_MMR_EBIU_AMC_SIZE): Move to ...
168 * dv-bfin_ebiu_ddrc.h (BFIN_MMR_EBIU_DDRC_SIZE): Move to ...
169 * dv-bfin_ebiu_sdc.h (BFIN_MMR_EBIU_SDC_SIZE): Move to ...
170 * dv-bfin_emac.h (BFIN_MMR_EMAC_{BASE,SIZE}): Move to ...
171 * dv-bfin_eppi.h (BFIN_MMR_EPPI_SIZE): Move to ...
172 * dv-bfin_evt.h (BFIN_COREMMR_EVT_{BASE,SIZE}): Move to ...
173 * dv-bfin_gpio.h (BFIN_MMR_GPIO_SIZE): Move to ...
174 * dv-bfin_gptimer.h (BFIN_MMR_GPTIMER_SIZE): Move to ...
175 * dv-bfin_jtag.h (BFIN_COREMMR_JTAG_{BASE,SIZE}): Move to ...
176 * dv-bfin_mmu.h (BFIN_COREMMR_MMU_{BASE,SIZE}): Move to ...
177 * dv-bfin_nfc.h (BFIN_MMR_NFC_SIZE): Move to ...
178 * dv-bfin_otp.h (BFIN_MMR_OTP_SIZE): Move to ...
179 * dv-bfin_pfmon.h (BFIN_COREMMR_PFMON_{BASE,SIZE}): Move to ...
180 * dv-bfin_pll.h (BFIN_MMR_PLL_{BASE,SIZE}): Move to ...
181 * dv-bfin_ppi.h (BFIN_MMR_PPI_SIZE): Move to ...
182 * dv-bfin_rtc.h (BFIN_MMR_RTC_SIZE): Move to ...
183 * dv-bfin_sic.h (BFIN_MMR_SIC_{BASE,SIZE}): Move to ...
184 * dv-bfin_spi.h (BFIN_MMR_SPI_SIZE): Move to ...
185 * dv-bfin_trace.h (BFIN_COREMMR_TRACE_{BASE,SIZE}): Move to ...
186 * dv-bfin_twi.h (BFIN_MMR_TWI_SIZE): Move to ...
187 * dv-bfin_uart.h (BFIN_MMR_UART_SIZE): Move to ...
188 * dv-bfin_uart2.h (BFIN_MMR_UART2_SIZE): Move to ...
189 * dv-bfin_wdog.h (BFIN_MMR_WDOG_SIZE): Move to ...
190 * dv-bfin_wp.h (BFIN_COREMMR_WP_{BASE,SIZE}): Move to ...
192 * machs.c: Delete all dv-bfin_*.h includes except for cec/dmac.
194 2011-05-25 Mike Frysinger <vapier@gentoo.org>
196 * Makefile.in (dv-bfin_pfmon.o): New target.
197 * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_pfmon.
198 * configure: Regenerated.
199 * dv-bfin_pfmon.c, dv-bfin_pfmon.h: New files.
200 * machs.c: Add include new bfin_pfmon.h.
201 (bfin_core_dev): Add pfmon.
203 2011-05-25 Mike Frysinger <vapier@gentoo.org>
205 * machs.c (bf526_roms): Add a region with rev of 2.
206 (bf54x_roms): Add regions with rev of 4.
207 * bfroms/all.h: Include new bf526-0.2.h, bf54x-0.4.h, and
208 bf54x_l1-0.4.h headers.
209 * bfroms/bf526-0.2.h, bfroms/bf54x-0.4.h, bfroms/bf54x_l1-0.4.h:
212 2011-05-14 Mike Frysinger <vapier@gentoo.org>
214 * bfin-sim.c (decode_PushPopReg_0): Delete (grp == 1 && reg == 6)
217 2011-05-14 Mike Frysinger <vapier@gentoo.org>
219 * dv-bfin_uart.c (bfin_uart_write_byte): Add a mcr arg. Declare a
220 local uart. When LOOP_ENA is set in mcr, write to the saved byte
221 and count fields of the uart.
222 (bfin_uart_io_write_buffer): Pass uart->mcr to bfin_uart_write_byte
223 and bfin_uart_get_next_byte.
224 (bfin_uart_get_next_byte): Add a mcr arg. Move uart->saved_count
225 check first, and skip the remaining code when LOOP_ENA is set in mcr.
226 * dv-bfin_uart.h (bfin_uart_write_byte): Add an mcr argument.
227 (bfin_uart_get_next_byte): Likewise.
228 (XOFF, MRTS, RFIT, RFRT, LOOP_ENA, FCPOL, ARTS, ACTS): Define.
229 * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Padd uart->mcr when
230 calling bfin_uart_write_byte and bfin_uart_get_next_byte.
232 2011-05-09 Mike Frysinger <vapier@gentoo.org>
234 * dv-bfin_uart2.c (bfin_uart_io_read_buffer): Clear DR/THRE/TEMT bits
235 from uart->lsr before setting them.
237 2011-04-27 Mike Frysinger <vapier@gentoo.org>
239 * dv-bfin_dmac.c (bfin_dmac): Constify pmap array.
240 (bfin_dmac_50x_pmap, bfin_dmac_51x_pmap, bfin_dmac_52x_pmap,
241 bfin_dmac_533_pmap, bfin_dmac_537_pmap, bfin_dmac0_538_pmap,
242 bfin_dmac1_538_pmap, bfin_dmac0_54x_pmap, bfin_dmac1_54x_pmap,
243 bfin_dmac0_561_pmap, bfin_dmac1_561_pmap, bfin_dmac_59x_pmap):
246 2011-04-26 Mike Frysinger <vapier@gentoo.org>
248 * dv-bfin_gpio.c (bfin_gpio_forward_ouput): New function.
249 (bfin_gpio_io_write_buffer): Store the current port state into
250 "data", and call bfin_gpio_forward_ouput when the data or dir
252 (bfin_gpio_ports): Change p0..p15 to bidirect_port.
254 2011-04-26 Mike Frysinger <vapier@gentoo.org>
256 * dv-bfin_gpio.c (bfin_gpio): Add "int_state" member.
257 (bfin_gpio_forward_int, bfin_gpio_forward_ints): New functions.
258 (bfin_gpio_io_write_buffer): Call bfin_gpio_forward_int when the
259 mask a or mask b MMRs are written.
260 (bfin_gpio_port_event): When handling edge gpios, set the bit in
261 int_state, call bfin_gpio_forward_ints, and then clear the bit.
262 When handling level gpios, clear/set the bit in int_state rather
263 than returning immediately. Call bfin_gpio_forward_ints instead
264 of checking mask[ab] and calling HW_TRACE/hw_port_event directly.
266 2011-04-16 Mike Frysinger <vapier@gentoo.org>
268 * bfin-sim.c (decode_dsp32alu_0): Call STORE instead of SET_DREG for
269 BYTEOP2P, BYTEOP3P, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK, and
271 (decode_dsp32shift_0): Call STORE instead of SET_DREG for PACK,
272 BITMUX, EXTRACT, DEPOSIT, ALIGN8, ALIGN16, and ALIGN24.
274 2011-04-14 Mike Frysinger <vapier@gentoo.org>
276 * bfin-sim.c (decode_dsp32alu_0): Set DIS_ALGN_EXPT when handling
277 BYTEOP2P, BYTEOP3P, SAA, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK,
278 and BYTEUNPACK insns.
280 2011-04-11 Mike Frysinger <vapier@gentoo.org>
282 * dv-bfin_sic.c (bfin_sic_port_event): New helper function.
283 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
284 bfin_sic_54x_port_event, bfin_sic_561_port_event): Include level
285 in the trace output, and call the new bfin_sic_port_event func.
287 2011-04-11 Mike Frysinger <vapier@gentoo.org>
289 * dv-bfin_gpio.c (bfin_gpio_ports): Add p15.
291 2011-04-01 Mike Frysinger <vapier@gentoo.org>
293 * dv-bfin_otp.c (bfin_otp_ports): Declare.
294 (bfin_otp_finish): Call set_hw_ports with bfin_otp_ports.
296 2011-03-29 Mike Frysinger <vapier@gentoo.org>
298 * configure: Regenerate after common/aclocal.m4 changes.
300 2011-03-28 Robin Getz <robin.getz@analog.com>
302 * bfin-sim.c (decode_dsp32alu_0): Cast high 16bits of A0.W to bs16
303 and add to casted low 16bits of A0.L and store in val0. Cast high
304 16bits of A1.W to bs16 and add to casted low 16bits of A1.L and
305 store in val1. Delete bit checks of val0 and val1.
307 2011-03-26 Robin Getz <robin.getz@analog.com>
309 * bfin-sim.c (decode_dsp32alu_0): Set result to 0x7FFFFFFF when
310 the result was 0x80000000 for RND12 subtraction.
312 2011-03-26 Robin Getz <robin.getz@analog.com>
314 * bfin-sim.c (decode_dsp32alu_0): Set VS when V is set.
316 2011-03-24 Mike Frysinger <vapier@gentoo.org>
318 * dv-bfin_gpio.c (bfin_gpio_port_event): Call HW_TRACE at every
319 major code flow point.
320 * dv-bfin_sic.c (bfin_sic_forward_interrupts): Call HW_TRACE just
321 before calling hw_port_event on ourselves.
322 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
323 bfin_sic_54x_port_event, bfin_sic_561_port_event): Call HW_TRACE
324 at the start of the function.
326 2011-03-24 Mike Frysinger <vapier@gentoo.org>
328 * dv-bfin_gpio.c (bfin_gpio_port_event): Split dir/inen bit checking.
329 Normalize "level" to 0/1 values. Shift "level" over by "my_port".
330 Invert port->both bit check.
332 2011-03-24 Mike Frysinger <vapier@gentoo.org>
334 * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Subtract 2 from the
335 valuep pointer for clear MMRs, 4 for set MMRs, and 6 for toggle MMRs.
337 2011-03-23 Mike Frysinger <vapier@gentoo.org>
339 * TODO: Document some known SIC issues.
341 2011-03-23 Mike Frysinger <vapier@gentoo.org>
343 * devices.h (dv_w1c): Fix typos in documentation of "bits" arg.
344 * dv-bfin_cec.c (bfin_cec_io_write_buffer): Pass 0xffee to dv_w1c_4.
345 * dv-bfin_emac.c (bfin_emac_io_write_buffer): Pass 0xe1 to dv_w1c_4
346 for systat MMR and -1 to dv_w1c_4 for [rt]x_stky/mmc_[rt]irqs MMRs.
347 * dv-bfin_eppi.c (bfin_eppi_io_write_buffer): Pass 0x1ff to dv_w1c_2.
348 * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Invert bits to dv_w1c_2.
349 * dv-bfin_jtag.c (bfin_jtag_io_write_buffer): Invert bits to dv_w1c_4.
350 * dv-bfin_nfc.c (bfin_nfc_io_write_buffer): Invert bits to dv_w1c_2.
351 * dv-bfin_otp.c (bfin_otp_io_write_buffer): Invert bits to dv_w1c_2.
352 * dv-bfin_ppi.c (bfin_ppi_io_write_buffer): Invert bits to dv_w1c_2.
353 * dv-bfin_rtc.c (bfin_rtc_io_write_buffer): Invert bits to dv_w1c_2.
354 * dv-bfin_spi.c (bfin_spi_io_write_buffer): Invert bits to dv_w1c_2.
355 * dv-bfin_twi.c (bfin_twi_io_write_buffer): Invert bits to dv_w1c_2.
356 * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Invert bits to dv_w1c_2.
358 2011-03-23 Mike Frysinger <vapier@gentoo.org>
360 * dv-bfin_uart.h (TFI, BI, FE, PE, OE): Define.
362 2011-03-23 Mike Frysinger <vapier@gentoo.org>
364 * dv-bfin_twi.h (LOSTARB): Rename from LOSTARG.
366 2011-03-23 Robin Getz <robin.getz@analog.com>
368 * bfin-sim.c (decode_dsp32shift_0): Set acc0 to the unextended
369 value for the VIT_MAX insn, and mask off the result when done.
371 2011-03-23 Robin Getz <robin.getz@analog.com>
373 * bfin-sim.c (decode_dsp32alu_0): Set A1 to a1_lo when up_hi is false,
374 and set A0 to a0_lo when up_lo is false.
376 2011-03-23 Robin Getz <robin.getz@analog.com>
378 * bfin-sim.c (decode_dsp32alu_0): Call saturate_s40_astat instead of
379 saturate_s40, and use the v parameter to update the AV bit. Set the
380 AC bit only when the final result is 0.
382 2011-03-23 Mike Frysinger <vapier@gentoo.org>
384 * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Define.
385 (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
386 bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
387 bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
388 Encode ids with the ENC macro.
389 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
390 bfin_sic_54x_port_event, bfin_sic_561_port_event): Set idx
391 from my_port with DEC_SIC, and set bit from my_port with DEC_PIN.
392 (bfin_sic_533_port_event): Delete.
393 (bfin_sic_finish): Call set_hw_port_event with
394 bfin_sic_537_port_event for BF533 and BF59x targets.
396 2011-03-23 Robin Getz <robin.getz@analog.com>
398 * bfin-sim.c (decode_dsp32alu_0): Drop the src0/src1 check for
399 BYTEOP1P, BYTEOP2P, and BYTEOP3P insns.
401 2011-03-23 Mike Frysinger <vapier@gentoo.org>
403 * machs.c (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev,
404 bf533_dev, bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev):
405 Change bfin_gpio addresses from f/g/h to 5/6/7.
406 (bfin_model_hw_tree_init): Add the bfin_gpio address base to 'a'.
408 2011-03-17 Mike Frysinger <vapier@gentoo.org>
410 * configure.ac (AC_CHECK_FUNCS): Check for kill and pread.
411 * configure: Regenerate.
412 * config.in: Regenerate.
413 * interp.c (bfin_syscall): Check for HAVE_{KILL,PREAD} before using
416 2011-03-15 Mike Frysinger <vapier@gentoo.org>
418 * Makefile.in (dv-bfin_gpio.o): New target.
419 * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio.
420 * configure: Regenerate.
421 * dv-bfin_gpio.c, dv-bfin_gpio.h: New files.
422 * machs.c: Include dv-bfin_gpio.h.
423 (bf50x_mem, bf51x_mem, bf52x_mem, bf531_mem, bf532_mem, bf533_mem,
424 bf534_mem, bf536_mem, bf537_mem, bf538_mem, bf561_mem, bf592_mem):
425 Delete GPIO memory stubs.
426 (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, bf533_dev,
427 bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): Add GPIO
429 (bfin_model_hw_tree_init): Hook up GPIO interrupts to SIC.
431 2011-03-15 Mike Frysinger <vapier@gentoo.org>
433 * bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, bfroms/bf51x-0.1.h,
434 bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, bfroms/bf526-0.1.h,
435 bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, bfroms/bf527-0.2.h,
436 bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, bfroms/bf533-0.3.h,
437 bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, bfroms/bf537-0.3.h,
438 bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, bfroms/bf54x-0.1.h,
439 bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, bfroms/bf54x_l1-0.1.h,
440 bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, bfroms/bf59x-0.0.h,
441 bfroms/bf59x_l1-0.1.h, dv-bfin_cec.c, dv-bfin_ctimer.c,
442 dv-bfin_dma.c, dv-bfin_dmac.c, dv-bfin_ebiu_amc.c,
443 dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_sdc.c, dv-bfin_emac.c,
444 dv-bfin_eppi.c, dv-bfin_evt.c, dv-bfin_gptimer.c, dv-bfin_jtag.c,
445 dv-bfin_mmu.c, dv-bfin_nfc.c, dv-bfin_otp.c, dv-bfin_pll.c,
446 dv-bfin_ppi.c, dv-bfin_rtc.c, dv-bfin_sic.c, dv-bfin_spi.c,
447 dv-bfin_trace.c, dv-bfin_twi.c, dv-bfin_uart.c, dv-bfin_uart2.c,
448 dv-bfin_wdog.c, dv-bfin_wp.c, dv-eth_phy.c, gui.c,
449 linux-fixed-code.h, linux-targ-map.h, machs.c, Makefile.in: Fix style.
451 2011-03-15 Robin Getz <robin.getz@analog.com>
453 * bfin-sim.c (decode_dsp32alu_0): Set AZ based on val for 16bit adds
456 2011-03-15 Robin Getz <robin.getz@analog.com>
458 * bfin-sim.c (decode_macfunc): Move acc STOREs behind op != 3 check.
460 2011-03-15 Robin Getz <robin.getz@analog.com>
462 * bfin-sim.c (decode_macfunc): New neg parameter. Set when the
463 high bit is set after extract_mult.
464 (decode_dsp32mac_0): Declare n_1 and n_0. Pass to the decode_macfunc
465 functions. Use these to update the AN bit.
467 2011-03-15 Robin Getz <robin.getz@analog.com>
469 * bfin-sim.c (decode_dsp32mult_0): Declare v_i0 and v_i1. Pass to
470 the extract_mult functions. Include these when updating the V, VS,
473 2011-03-15 Robin Getz <robin.getz@analog.com>
475 * bfin-sim.c (astat_names): New global bit array.
476 (decode_CC2stat_0): Delete local astat_name and astat_names.
477 (decode_psedodbg_assert_0): Move hardcoded offset into a variable.
478 Print out ASTAT bit values when checking an ASTAT register.
480 2010-03-15 Robin Getz <robin.getz@analog.com>
482 * bfin-sim.c (extract_mult): Handle M_IU.
484 2011-03-05 Mike Frysinger <vapier@gentoo.org>
486 * Makefile.in, TODO, aclocal.m4, bfin-sim.c, bfin-sim.h,
487 bfroms/all.h, bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h,
488 bfroms/bf51x-0.1.h, bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h,
489 bfroms/bf526-0.1.h, bfroms/bf527-0.0.h, bfroms/bf527-0.1.h,
490 bfroms/bf527-0.2.h, bfroms/bf533-0.1.h, bfroms/bf533-0.2.h,
491 bfroms/bf533-0.3.h, bfroms/bf537-0.0.h, bfroms/bf537-0.1.h,
492 bfroms/bf537-0.3.h, bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h,
493 bfroms/bf54x-0.1.h, bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h,
494 bfroms/bf54x_l1-0.1.h, bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h,
495 bfroms/bf59x-0.0.h, bfroms/bf59x_l1-0.1.h, config.in, configure,
496 configure.ac, devices.c, devices.h, dv-bfin_cec.c, dv-bfin_cec.h,
497 dv-bfin_ctimer.c, dv-bfin_ctimer.h, dv-bfin_dma.c, dv-bfin_dma.h,
498 dv-bfin_dmac.c, dv-bfin_dmac.h, dv-bfin_ebiu_amc.c, dv-bfin_ebiu_amc.h,
499 dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_ddrc.h, dv-bfin_ebiu_sdc.c,
500 dv-bfin_ebiu_sdc.h, dv-bfin_emac.c, dv-bfin_emac.h, dv-bfin_eppi.c,
501 dv-bfin_eppi.h, dv-bfin_evt.c, dv-bfin_evt.h, dv-bfin_gptimer.c,
502 dv-bfin_gptimer.h, dv-bfin_jtag.c, dv-bfin_jtag.h, dv-bfin_mmu.c,
503 dv-bfin_mmu.h, dv-bfin_nfc.c, dv-bfin_nfc.h, dv-bfin_otp.c,
504 dv-bfin_otp.h, dv-bfin_pll.c, dv-bfin_pll.h, dv-bfin_ppi.c,
505 dv-bfin_ppi.h, dv-bfin_rtc.c, dv-bfin_rtc.h, dv-bfin_sic.c,
506 dv-bfin_sic.h, dv-bfin_spi.c, dv-bfin_spi.h, dv-bfin_trace.c,
507 dv-bfin_trace.h, dv-bfin_twi.c, dv-bfin_twi.h, dv-bfin_uart.c,
508 dv-bfin_uart.h, dv-bfin_uart2.c, dv-bfin_uart2.h, dv-bfin_wdog.c,
509 dv-bfin_wdog.h, dv-bfin_wp.c, dv-bfin_wp.h, dv-eth_phy.c, gui.c,
510 gui.h, insn_list.def, interp.c, linux-fixed-code.h, linux-fixed-code.s,
511 linux-targ-map.h, machs.c, machs.h, proc_list.def, sim-main.h,
512 tconfig.in: New Blackfin port.