1 2011-12-03 Mike Frysinger <vapier@gentoo.org>
3 * Makefile.in: Delete all dependency rules.
4 * aclocal.m4, configure: Regenerate.
6 2011-10-19 Mike Frysinger <vapier@gentoo.org>
8 * configure: Regenerate after common/acinclude.m4 update.
10 2011-10-17 Mike Frysinger <vapier@gentoo.org>
12 * configure.ac: Change include to common/acinclude.m4.
13 * aclocal.m4, configure: Regenerate.
15 2011-10-17 Mike Frysinger <vapier@gentoo.org>
17 * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER
18 call. Replace common.m4 include with SIM_AC_COMMON.
19 * configure: Regenerate.
21 2011-09-28 Mike Frysinger <vapier@gentoo.org>
23 * bfin-sim.c (decode_dsp32shift_0): Use STORE() for VIT_MAX insns.
25 2011-07-05 Mike Frysinger <vapier@gentoo.org>
27 * interp.c (sim_do_command): Delete.
29 2011-07-01 Mike Frysinger <vapier@gentoo.org>
31 * interp.c (cb_linux_stat_map_32, cb_linux_stat_map_64): Rename from
32 stat_map_32 and stat_map_64.
33 (cb_libgloss_stat_map_32): New stat map.
34 (stat_map_32, stat_map_64): New stat map pointers.
35 (bfin_user_init): Assign stat_map_32 to cb_linux_stat_map_32 and
36 stat_map_64 to cb_linux_stat_map_64.
37 (bfin_virtual_init): New function.
38 (sim_create_inferior): Call bfin_virtual_init for all other envs.
40 2011-06-22 Mike Frysinger <vapier@gentoo.org>
42 * interp.c (bfin_syscall): Delete old comment. Set dreg 1 to
43 sc.result2 and dreg 2 to sc.errcode.
45 2011-06-18 Robin Getz <robin.getz@analog.com>
47 * bfin-sim.c (decode_dsp32shift_0): Clear ASTAT[AV] if val is 0,
48 else set it. Set ASTAT[AVS] if val is 0. Do this for LSHIFT and
49 ASHIFT accumulator insns.
51 2011-06-18 Robin Getz <robin.getz@analog.com>
53 * bfin-sim.c (ashiftrt): If size is 40, do not call SET_ASTATREG.
56 2011-06-18 Robin Getz <robin.getz@analog.com>
58 * bfin-sim.c (decode_dsp32shift_0): Use get_unextended_acc
59 rather than get_extended_acc in LSHIFT insns.
61 2011-06-18 Robin Getz <robin.getz@analog.com>
63 * bfin-sim.c (decode_macfunc): Handle MM when mmod is M_TFU.
64 Check MM once when mmod is M_FU to match M_TFU better.
66 2011-06-18 Robin Getz <robin.getz@analog.com>
68 * bfin-sim.c (decode_dsp32shiftimm_0): When shift is greater than
69 32, perform a left shift. Update the corresponding AV bit. Set
70 AZ when the low 32bits are also zero.
72 2011-06-18 Robin Getz <robin.getz@analog.com>
74 * bfin-sim.c (decode_dsp32shiftimm_0): With left shift vector insns,
75 call lshift only when count is positive. Otherwise, call ashiftrt.
76 With arithmetic right shift insns, call ashiftrt when the value is
77 small enough, otherwise call lshift.
79 2011-06-18 Robin Getz <robin.getz@analog.com>
81 * bfin-sim.c (extract_mult): Call saturate_s16 directly when
82 mmod is M_IH rather than computing the result by hand.
84 2011-06-18 Robin Getz <robin.getz@analog.com>
86 * bfin-sim.c (decode_macfunc): Add nosat_acc to track acc value
87 before saturation, set sat when more cases saturate, and set the
88 overflow bit based on these results. For M_TFU, M_IU, M_FU, and
89 M_W32, change the max values compared against.
90 (decode_dsp32mac_0): Delete v_i and add v_0 and v_1. Pass v_1
91 when processing MAC1 and pass v_0 when processing MAC0. Combine
92 the results into the V/VS ASTAT bits.
94 2011-06-18 Robin Getz <robin.getz@analog.com>
96 * bfin-sim.c (extract_mult): Call saturate_s32 when MM is set
97 and mmod is M_IU. Call saturate_s16 when MM is set and mmod
100 2011-06-18 Robin Getz <robin.getz@analog.com>
102 * bfin-sim.c (decode_multfunc): Call new is_macmod_signed, and
103 allow MM to sign extend all the time.
104 (decode_macfunc): Likewise. Drop sign extension of unsigned
107 2011-06-18 Robin Getz <robin.getz@analog.com>
109 * bfin-sim.c (saturate_s40_astat): Change ">=" to ">".
110 (decode_macfunc): Likewise when mmod is M_IH.
112 2011-06-18 Mike Frysinger <vapier@gentoo.org>
114 * interp.c (sim_create_inferior): Change free to freeargv.
116 2011-06-04 Mike Frysinger <vapier@gentoo.org>
118 * machs.c (bf534_dev, bf537_dev): Add glue-or devices.
119 (bf537_port): Define applicable devices with PORT to the glue-or
120 devices instead of SIC.
121 (bfin_model_hw_tree_init): Drop old sim_hw_parse call for bfin_sic.
122 Only parse reg/type when the device has an address. Move the call
123 to dv_bfin_hw_port_parse up before slash check.
125 2011-06-04 Mike Frysinger <vapier@gentoo.org>
127 * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Move above the
128 BFIN_SIC_TO_CEC_PORTS definition.
129 (SIC_PORTS): New define.
130 (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
131 bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
132 bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
134 (bfin_sic1_ports, bfin_sic2_ports, bfin_sic3_ports,
135 bfin_sic_561_ports): Define new layouts with SIC_PORTS().
136 (bfin_sic_finish): Change reference to bfin_sic_50x_ports,
137 bfin_sic_51x_ports, bfin_sic_52x_ports, and bfin_sic_538_ports
138 to bfin_sic2_ports. Change reference to bfin_sic_533_ports,
139 bfin_sic_537_ports, and bfin_sic_59x_ports to bfin_sic1_ports.
140 Change reference to bfin_sic_54x_ports to bfin_sic3_ports.
141 * machs.c (bfin_port_layout): New structure.
142 (bfin_model_data): Add new "port" and "port_count" members.
143 (PORT, SIC): New defines.
144 (bf000_port, bf50x_port, bf51x_port, bf52x_port, bf533_port,
145 bf537_port, bf538_port, bf54x_port, bf561_port, bf592_port):
146 Move and redefine port layout from dv-bfin_sic.c to here.
147 (bf504_port, bf506_port, bf512_port, bf514_port, bf516_port,
148 bf518_port, bf522_port, bf523_port, bf524_port, bf525_port,
149 bf526_port, bf527_port, bf531_port, bf532_port, bf534_port,
150 bf536_port, bf539_port, bf542_port, bf544_port, bf547_port,
151 bf548_port, bf549_port): New defines.
152 (bfin_model_data): Link in new bfin_port_layout.port member.
153 (dv_bfin_hw_port_parse): New function.
154 (dv_bfin_hw_parse): Call new dv_bfin_hw_port_parse function.
155 (bfin_model_hw_tree_init): Replace calls to sim_hw_parse for
156 bfin_sic links with new dv_bfin_hw_port_parse function.
158 2011-06-03 Mike Frysinger <vapier@gentoo.org>
160 * dv-bfin_dma.c (bfin_dma_io_write_buffer): Fix indentation.
162 2011-05-25 Mike Frysinger <vapier@gentoo.org>
164 * sim-main.h (TRACE_SYSCALL): Change EVENTS to SYSCALL.
166 2011-05-25 Mike Frysinger <vapier@gentoo.org>
168 * dv-bfin_cec.h (BFIN_COREMMR_CEC_{BASE,SIZE}): Move to ...
169 * dv-bfin_ctimer.h (BFIN_COREMMR_CTIMER_{BASE,SIZE}): Move to ...
170 * dv-bfin_dma.h (BFIN_MMR_DMA_SIZE): Move to ...
171 * dv-bfin_dmac.h (BFIN_MMR_DMAC{0,1}_BASE): Move to ...
172 * dv-bfin_ebiu_amc.h (BF{IN,50X,54X}_MMR_EBIU_AMC_SIZE): Move to ...
173 * dv-bfin_ebiu_ddrc.h (BFIN_MMR_EBIU_DDRC_SIZE): Move to ...
174 * dv-bfin_ebiu_sdc.h (BFIN_MMR_EBIU_SDC_SIZE): Move to ...
175 * dv-bfin_emac.h (BFIN_MMR_EMAC_{BASE,SIZE}): Move to ...
176 * dv-bfin_eppi.h (BFIN_MMR_EPPI_SIZE): Move to ...
177 * dv-bfin_evt.h (BFIN_COREMMR_EVT_{BASE,SIZE}): Move to ...
178 * dv-bfin_gpio.h (BFIN_MMR_GPIO_SIZE): Move to ...
179 * dv-bfin_gptimer.h (BFIN_MMR_GPTIMER_SIZE): Move to ...
180 * dv-bfin_jtag.h (BFIN_COREMMR_JTAG_{BASE,SIZE}): Move to ...
181 * dv-bfin_mmu.h (BFIN_COREMMR_MMU_{BASE,SIZE}): Move to ...
182 * dv-bfin_nfc.h (BFIN_MMR_NFC_SIZE): Move to ...
183 * dv-bfin_otp.h (BFIN_MMR_OTP_SIZE): Move to ...
184 * dv-bfin_pfmon.h (BFIN_COREMMR_PFMON_{BASE,SIZE}): Move to ...
185 * dv-bfin_pll.h (BFIN_MMR_PLL_{BASE,SIZE}): Move to ...
186 * dv-bfin_ppi.h (BFIN_MMR_PPI_SIZE): Move to ...
187 * dv-bfin_rtc.h (BFIN_MMR_RTC_SIZE): Move to ...
188 * dv-bfin_sic.h (BFIN_MMR_SIC_{BASE,SIZE}): Move to ...
189 * dv-bfin_spi.h (BFIN_MMR_SPI_SIZE): Move to ...
190 * dv-bfin_trace.h (BFIN_COREMMR_TRACE_{BASE,SIZE}): Move to ...
191 * dv-bfin_twi.h (BFIN_MMR_TWI_SIZE): Move to ...
192 * dv-bfin_uart.h (BFIN_MMR_UART_SIZE): Move to ...
193 * dv-bfin_uart2.h (BFIN_MMR_UART2_SIZE): Move to ...
194 * dv-bfin_wdog.h (BFIN_MMR_WDOG_SIZE): Move to ...
195 * dv-bfin_wp.h (BFIN_COREMMR_WP_{BASE,SIZE}): Move to ...
197 * machs.c: Delete all dv-bfin_*.h includes except for cec/dmac.
199 2011-05-25 Mike Frysinger <vapier@gentoo.org>
201 * Makefile.in (dv-bfin_pfmon.o): New target.
202 * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_pfmon.
203 * configure: Regenerated.
204 * dv-bfin_pfmon.c, dv-bfin_pfmon.h: New files.
205 * machs.c: Add include new bfin_pfmon.h.
206 (bfin_core_dev): Add pfmon.
208 2011-05-25 Mike Frysinger <vapier@gentoo.org>
210 * machs.c (bf526_roms): Add a region with rev of 2.
211 (bf54x_roms): Add regions with rev of 4.
212 * bfroms/all.h: Include new bf526-0.2.h, bf54x-0.4.h, and
213 bf54x_l1-0.4.h headers.
214 * bfroms/bf526-0.2.h, bfroms/bf54x-0.4.h, bfroms/bf54x_l1-0.4.h:
217 2011-05-14 Mike Frysinger <vapier@gentoo.org>
219 * bfin-sim.c (decode_PushPopReg_0): Delete (grp == 1 && reg == 6)
222 2011-05-14 Mike Frysinger <vapier@gentoo.org>
224 * dv-bfin_uart.c (bfin_uart_write_byte): Add a mcr arg. Declare a
225 local uart. When LOOP_ENA is set in mcr, write to the saved byte
226 and count fields of the uart.
227 (bfin_uart_io_write_buffer): Pass uart->mcr to bfin_uart_write_byte
228 and bfin_uart_get_next_byte.
229 (bfin_uart_get_next_byte): Add a mcr arg. Move uart->saved_count
230 check first, and skip the remaining code when LOOP_ENA is set in mcr.
231 * dv-bfin_uart.h (bfin_uart_write_byte): Add an mcr argument.
232 (bfin_uart_get_next_byte): Likewise.
233 (XOFF, MRTS, RFIT, RFRT, LOOP_ENA, FCPOL, ARTS, ACTS): Define.
234 * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Padd uart->mcr when
235 calling bfin_uart_write_byte and bfin_uart_get_next_byte.
237 2011-05-09 Mike Frysinger <vapier@gentoo.org>
239 * dv-bfin_uart2.c (bfin_uart_io_read_buffer): Clear DR/THRE/TEMT bits
240 from uart->lsr before setting them.
242 2011-04-27 Mike Frysinger <vapier@gentoo.org>
244 * dv-bfin_dmac.c (bfin_dmac): Constify pmap array.
245 (bfin_dmac_50x_pmap, bfin_dmac_51x_pmap, bfin_dmac_52x_pmap,
246 bfin_dmac_533_pmap, bfin_dmac_537_pmap, bfin_dmac0_538_pmap,
247 bfin_dmac1_538_pmap, bfin_dmac0_54x_pmap, bfin_dmac1_54x_pmap,
248 bfin_dmac0_561_pmap, bfin_dmac1_561_pmap, bfin_dmac_59x_pmap):
251 2011-04-26 Mike Frysinger <vapier@gentoo.org>
253 * dv-bfin_gpio.c (bfin_gpio_forward_ouput): New function.
254 (bfin_gpio_io_write_buffer): Store the current port state into
255 "data", and call bfin_gpio_forward_ouput when the data or dir
257 (bfin_gpio_ports): Change p0..p15 to bidirect_port.
259 2011-04-26 Mike Frysinger <vapier@gentoo.org>
261 * dv-bfin_gpio.c (bfin_gpio): Add "int_state" member.
262 (bfin_gpio_forward_int, bfin_gpio_forward_ints): New functions.
263 (bfin_gpio_io_write_buffer): Call bfin_gpio_forward_int when the
264 mask a or mask b MMRs are written.
265 (bfin_gpio_port_event): When handling edge gpios, set the bit in
266 int_state, call bfin_gpio_forward_ints, and then clear the bit.
267 When handling level gpios, clear/set the bit in int_state rather
268 than returning immediately. Call bfin_gpio_forward_ints instead
269 of checking mask[ab] and calling HW_TRACE/hw_port_event directly.
271 2011-04-16 Mike Frysinger <vapier@gentoo.org>
273 * bfin-sim.c (decode_dsp32alu_0): Call STORE instead of SET_DREG for
274 BYTEOP2P, BYTEOP3P, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK, and
276 (decode_dsp32shift_0): Call STORE instead of SET_DREG for PACK,
277 BITMUX, EXTRACT, DEPOSIT, ALIGN8, ALIGN16, and ALIGN24.
279 2011-04-14 Mike Frysinger <vapier@gentoo.org>
281 * bfin-sim.c (decode_dsp32alu_0): Set DIS_ALGN_EXPT when handling
282 BYTEOP2P, BYTEOP3P, SAA, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK,
283 and BYTEUNPACK insns.
285 2011-04-11 Mike Frysinger <vapier@gentoo.org>
287 * dv-bfin_sic.c (bfin_sic_port_event): New helper function.
288 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
289 bfin_sic_54x_port_event, bfin_sic_561_port_event): Include level
290 in the trace output, and call the new bfin_sic_port_event func.
292 2011-04-11 Mike Frysinger <vapier@gentoo.org>
294 * dv-bfin_gpio.c (bfin_gpio_ports): Add p15.
296 2011-04-01 Mike Frysinger <vapier@gentoo.org>
298 * dv-bfin_otp.c (bfin_otp_ports): Declare.
299 (bfin_otp_finish): Call set_hw_ports with bfin_otp_ports.
301 2011-03-29 Mike Frysinger <vapier@gentoo.org>
303 * configure: Regenerate after common/aclocal.m4 changes.
305 2011-03-28 Robin Getz <robin.getz@analog.com>
307 * bfin-sim.c (decode_dsp32alu_0): Cast high 16bits of A0.W to bs16
308 and add to casted low 16bits of A0.L and store in val0. Cast high
309 16bits of A1.W to bs16 and add to casted low 16bits of A1.L and
310 store in val1. Delete bit checks of val0 and val1.
312 2011-03-26 Robin Getz <robin.getz@analog.com>
314 * bfin-sim.c (decode_dsp32alu_0): Set result to 0x7FFFFFFF when
315 the result was 0x80000000 for RND12 subtraction.
317 2011-03-26 Robin Getz <robin.getz@analog.com>
319 * bfin-sim.c (decode_dsp32alu_0): Set VS when V is set.
321 2011-03-24 Mike Frysinger <vapier@gentoo.org>
323 * dv-bfin_gpio.c (bfin_gpio_port_event): Call HW_TRACE at every
324 major code flow point.
325 * dv-bfin_sic.c (bfin_sic_forward_interrupts): Call HW_TRACE just
326 before calling hw_port_event on ourselves.
327 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
328 bfin_sic_54x_port_event, bfin_sic_561_port_event): Call HW_TRACE
329 at the start of the function.
331 2011-03-24 Mike Frysinger <vapier@gentoo.org>
333 * dv-bfin_gpio.c (bfin_gpio_port_event): Split dir/inen bit checking.
334 Normalize "level" to 0/1 values. Shift "level" over by "my_port".
335 Invert port->both bit check.
337 2011-03-24 Mike Frysinger <vapier@gentoo.org>
339 * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Subtract 2 from the
340 valuep pointer for clear MMRs, 4 for set MMRs, and 6 for toggle MMRs.
342 2011-03-23 Mike Frysinger <vapier@gentoo.org>
344 * TODO: Document some known SIC issues.
346 2011-03-23 Mike Frysinger <vapier@gentoo.org>
348 * devices.h (dv_w1c): Fix typos in documentation of "bits" arg.
349 * dv-bfin_cec.c (bfin_cec_io_write_buffer): Pass 0xffee to dv_w1c_4.
350 * dv-bfin_emac.c (bfin_emac_io_write_buffer): Pass 0xe1 to dv_w1c_4
351 for systat MMR and -1 to dv_w1c_4 for [rt]x_stky/mmc_[rt]irqs MMRs.
352 * dv-bfin_eppi.c (bfin_eppi_io_write_buffer): Pass 0x1ff to dv_w1c_2.
353 * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Invert bits to dv_w1c_2.
354 * dv-bfin_jtag.c (bfin_jtag_io_write_buffer): Invert bits to dv_w1c_4.
355 * dv-bfin_nfc.c (bfin_nfc_io_write_buffer): Invert bits to dv_w1c_2.
356 * dv-bfin_otp.c (bfin_otp_io_write_buffer): Invert bits to dv_w1c_2.
357 * dv-bfin_ppi.c (bfin_ppi_io_write_buffer): Invert bits to dv_w1c_2.
358 * dv-bfin_rtc.c (bfin_rtc_io_write_buffer): Invert bits to dv_w1c_2.
359 * dv-bfin_spi.c (bfin_spi_io_write_buffer): Invert bits to dv_w1c_2.
360 * dv-bfin_twi.c (bfin_twi_io_write_buffer): Invert bits to dv_w1c_2.
361 * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Invert bits to dv_w1c_2.
363 2011-03-23 Mike Frysinger <vapier@gentoo.org>
365 * dv-bfin_uart.h (TFI, BI, FE, PE, OE): Define.
367 2011-03-23 Mike Frysinger <vapier@gentoo.org>
369 * dv-bfin_twi.h (LOSTARB): Rename from LOSTARG.
371 2011-03-23 Robin Getz <robin.getz@analog.com>
373 * bfin-sim.c (decode_dsp32shift_0): Set acc0 to the unextended
374 value for the VIT_MAX insn, and mask off the result when done.
376 2011-03-23 Robin Getz <robin.getz@analog.com>
378 * bfin-sim.c (decode_dsp32alu_0): Set A1 to a1_lo when up_hi is false,
379 and set A0 to a0_lo when up_lo is false.
381 2011-03-23 Robin Getz <robin.getz@analog.com>
383 * bfin-sim.c (decode_dsp32alu_0): Call saturate_s40_astat instead of
384 saturate_s40, and use the v parameter to update the AV bit. Set the
385 AC bit only when the final result is 0.
387 2011-03-23 Mike Frysinger <vapier@gentoo.org>
389 * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Define.
390 (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
391 bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
392 bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
393 Encode ids with the ENC macro.
394 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
395 bfin_sic_54x_port_event, bfin_sic_561_port_event): Set idx
396 from my_port with DEC_SIC, and set bit from my_port with DEC_PIN.
397 (bfin_sic_533_port_event): Delete.
398 (bfin_sic_finish): Call set_hw_port_event with
399 bfin_sic_537_port_event for BF533 and BF59x targets.
401 2011-03-23 Robin Getz <robin.getz@analog.com>
403 * bfin-sim.c (decode_dsp32alu_0): Drop the src0/src1 check for
404 BYTEOP1P, BYTEOP2P, and BYTEOP3P insns.
406 2011-03-23 Mike Frysinger <vapier@gentoo.org>
408 * machs.c (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev,
409 bf533_dev, bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev):
410 Change bfin_gpio addresses from f/g/h to 5/6/7.
411 (bfin_model_hw_tree_init): Add the bfin_gpio address base to 'a'.
413 2011-03-17 Mike Frysinger <vapier@gentoo.org>
415 * configure.ac (AC_CHECK_FUNCS): Check for kill and pread.
416 * configure: Regenerate.
417 * config.in: Regenerate.
418 * interp.c (bfin_syscall): Check for HAVE_{KILL,PREAD} before using
421 2011-03-15 Mike Frysinger <vapier@gentoo.org>
423 * Makefile.in (dv-bfin_gpio.o): New target.
424 * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio.
425 * configure: Regenerate.
426 * dv-bfin_gpio.c, dv-bfin_gpio.h: New files.
427 * machs.c: Include dv-bfin_gpio.h.
428 (bf50x_mem, bf51x_mem, bf52x_mem, bf531_mem, bf532_mem, bf533_mem,
429 bf534_mem, bf536_mem, bf537_mem, bf538_mem, bf561_mem, bf592_mem):
430 Delete GPIO memory stubs.
431 (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, bf533_dev,
432 bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): Add GPIO
434 (bfin_model_hw_tree_init): Hook up GPIO interrupts to SIC.
436 2011-03-15 Mike Frysinger <vapier@gentoo.org>
438 * bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, bfroms/bf51x-0.1.h,
439 bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, bfroms/bf526-0.1.h,
440 bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, bfroms/bf527-0.2.h,
441 bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, bfroms/bf533-0.3.h,
442 bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, bfroms/bf537-0.3.h,
443 bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, bfroms/bf54x-0.1.h,
444 bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, bfroms/bf54x_l1-0.1.h,
445 bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, bfroms/bf59x-0.0.h,
446 bfroms/bf59x_l1-0.1.h, dv-bfin_cec.c, dv-bfin_ctimer.c,
447 dv-bfin_dma.c, dv-bfin_dmac.c, dv-bfin_ebiu_amc.c,
448 dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_sdc.c, dv-bfin_emac.c,
449 dv-bfin_eppi.c, dv-bfin_evt.c, dv-bfin_gptimer.c, dv-bfin_jtag.c,
450 dv-bfin_mmu.c, dv-bfin_nfc.c, dv-bfin_otp.c, dv-bfin_pll.c,
451 dv-bfin_ppi.c, dv-bfin_rtc.c, dv-bfin_sic.c, dv-bfin_spi.c,
452 dv-bfin_trace.c, dv-bfin_twi.c, dv-bfin_uart.c, dv-bfin_uart2.c,
453 dv-bfin_wdog.c, dv-bfin_wp.c, dv-eth_phy.c, gui.c,
454 linux-fixed-code.h, linux-targ-map.h, machs.c, Makefile.in: Fix style.
456 2011-03-15 Robin Getz <robin.getz@analog.com>
458 * bfin-sim.c (decode_dsp32alu_0): Set AZ based on val for 16bit adds
461 2011-03-15 Robin Getz <robin.getz@analog.com>
463 * bfin-sim.c (decode_macfunc): Move acc STOREs behind op != 3 check.
465 2011-03-15 Robin Getz <robin.getz@analog.com>
467 * bfin-sim.c (decode_macfunc): New neg parameter. Set when the
468 high bit is set after extract_mult.
469 (decode_dsp32mac_0): Declare n_1 and n_0. Pass to the decode_macfunc
470 functions. Use these to update the AN bit.
472 2011-03-15 Robin Getz <robin.getz@analog.com>
474 * bfin-sim.c (decode_dsp32mult_0): Declare v_i0 and v_i1. Pass to
475 the extract_mult functions. Include these when updating the V, VS,
478 2011-03-15 Robin Getz <robin.getz@analog.com>
480 * bfin-sim.c (astat_names): New global bit array.
481 (decode_CC2stat_0): Delete local astat_name and astat_names.
482 (decode_psedodbg_assert_0): Move hardcoded offset into a variable.
483 Print out ASTAT bit values when checking an ASTAT register.
485 2010-03-15 Robin Getz <robin.getz@analog.com>
487 * bfin-sim.c (extract_mult): Handle M_IU.
489 2011-03-05 Mike Frysinger <vapier@gentoo.org>
491 * Makefile.in, TODO, aclocal.m4, bfin-sim.c, bfin-sim.h,
492 bfroms/all.h, bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h,
493 bfroms/bf51x-0.1.h, bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h,
494 bfroms/bf526-0.1.h, bfroms/bf527-0.0.h, bfroms/bf527-0.1.h,
495 bfroms/bf527-0.2.h, bfroms/bf533-0.1.h, bfroms/bf533-0.2.h,
496 bfroms/bf533-0.3.h, bfroms/bf537-0.0.h, bfroms/bf537-0.1.h,
497 bfroms/bf537-0.3.h, bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h,
498 bfroms/bf54x-0.1.h, bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h,
499 bfroms/bf54x_l1-0.1.h, bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h,
500 bfroms/bf59x-0.0.h, bfroms/bf59x_l1-0.1.h, config.in, configure,
501 configure.ac, devices.c, devices.h, dv-bfin_cec.c, dv-bfin_cec.h,
502 dv-bfin_ctimer.c, dv-bfin_ctimer.h, dv-bfin_dma.c, dv-bfin_dma.h,
503 dv-bfin_dmac.c, dv-bfin_dmac.h, dv-bfin_ebiu_amc.c, dv-bfin_ebiu_amc.h,
504 dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_ddrc.h, dv-bfin_ebiu_sdc.c,
505 dv-bfin_ebiu_sdc.h, dv-bfin_emac.c, dv-bfin_emac.h, dv-bfin_eppi.c,
506 dv-bfin_eppi.h, dv-bfin_evt.c, dv-bfin_evt.h, dv-bfin_gptimer.c,
507 dv-bfin_gptimer.h, dv-bfin_jtag.c, dv-bfin_jtag.h, dv-bfin_mmu.c,
508 dv-bfin_mmu.h, dv-bfin_nfc.c, dv-bfin_nfc.h, dv-bfin_otp.c,
509 dv-bfin_otp.h, dv-bfin_pll.c, dv-bfin_pll.h, dv-bfin_ppi.c,
510 dv-bfin_ppi.h, dv-bfin_rtc.c, dv-bfin_rtc.h, dv-bfin_sic.c,
511 dv-bfin_sic.h, dv-bfin_spi.c, dv-bfin_spi.h, dv-bfin_trace.c,
512 dv-bfin_trace.h, dv-bfin_twi.c, dv-bfin_twi.h, dv-bfin_uart.c,
513 dv-bfin_uart.h, dv-bfin_uart2.c, dv-bfin_uart2.h, dv-bfin_wdog.c,
514 dv-bfin_wdog.h, dv-bfin_wp.c, dv-bfin_wp.h, dv-eth_phy.c, gui.c,
515 gui.h, insn_list.def, interp.c, linux-fixed-code.h, linux-fixed-code.s,
516 linux-targ-map.h, machs.c, machs.h, proc_list.def, sim-main.h,
517 tconfig.in: New Blackfin port.