1 2012-03-18 Mike Frysinger <vapier@gentoo.org>
3 * dv-bfin_ebiu_amc.c (struct bfin_ebiu_amc): Add bank_base.
4 (bfin_ebiu_amc_write_amgctl): Replace BFIN_EBIU_AMC_BASE with
6 (bfin_ebiu_amc_finish): Assign BFIN_EBIU_AMC_BASE to amc->bank_base.
8 2012-03-18 Mike Frysinger <vapier@gentoo.org>
10 * dv-bfin_ebiu_amc.c (bfin_ebiu_amc_attach_address_callback): Use
11 ARRAY_SIZE rather than hardcoded constant.
13 2012-02-04 Mike Frysinger <vapier@gentoo.org>
15 * config.in: Regenerate.
16 * configure: Likewise.
17 * configure.ac: Add linux/types.h to AC_CHECK_HEADERS.
18 * dv-eth_phy.c: Check for HAVE_LINUX_TYPES_H, and delete __u16 and
19 _LINUX_TYPES_H defines.
21 2011-12-03 Mike Frysinger <vapier@gentoo.org>
23 * interp.c (bfin_syscall): Increase _tbuf storage. Declare new local
24 tstr buffer. Call cb_get_string on tstr when handling CB_SYS_stat64,
25 CB_SYS_lstat64, CB_SYS_open, CB_SYS_write, CB_SYS_unlink,
26 CB_SYS_truncate, CB_SYS_rename, CB_SYS_stat, CB_SYS_lstat. Include
27 tstr in the tbuf output.
29 2011-12-03 Mike Frysinger <vapier@gentoo.org>
31 * Makefile.in: Delete all dependency rules.
32 * aclocal.m4, configure: Regenerate.
34 2011-10-19 Mike Frysinger <vapier@gentoo.org>
36 * configure: Regenerate after common/acinclude.m4 update.
38 2011-10-17 Mike Frysinger <vapier@gentoo.org>
40 * configure.ac: Change include to common/acinclude.m4.
41 * aclocal.m4, configure: Regenerate.
43 2011-10-17 Mike Frysinger <vapier@gentoo.org>
45 * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER
46 call. Replace common.m4 include with SIM_AC_COMMON.
47 * configure: Regenerate.
49 2011-09-28 Mike Frysinger <vapier@gentoo.org>
51 * bfin-sim.c (decode_dsp32shift_0): Use STORE() for VIT_MAX insns.
53 2011-07-05 Mike Frysinger <vapier@gentoo.org>
55 * interp.c (sim_do_command): Delete.
57 2011-07-01 Mike Frysinger <vapier@gentoo.org>
59 * interp.c (cb_linux_stat_map_32, cb_linux_stat_map_64): Rename from
60 stat_map_32 and stat_map_64.
61 (cb_libgloss_stat_map_32): New stat map.
62 (stat_map_32, stat_map_64): New stat map pointers.
63 (bfin_user_init): Assign stat_map_32 to cb_linux_stat_map_32 and
64 stat_map_64 to cb_linux_stat_map_64.
65 (bfin_virtual_init): New function.
66 (sim_create_inferior): Call bfin_virtual_init for all other envs.
68 2011-06-22 Mike Frysinger <vapier@gentoo.org>
70 * interp.c (bfin_syscall): Delete old comment. Set dreg 1 to
71 sc.result2 and dreg 2 to sc.errcode.
73 2011-06-18 Robin Getz <robin.getz@analog.com>
75 * bfin-sim.c (decode_dsp32shift_0): Clear ASTAT[AV] if val is 0,
76 else set it. Set ASTAT[AVS] if val is 0. Do this for LSHIFT and
77 ASHIFT accumulator insns.
79 2011-06-18 Robin Getz <robin.getz@analog.com>
81 * bfin-sim.c (ashiftrt): If size is 40, do not call SET_ASTATREG.
84 2011-06-18 Robin Getz <robin.getz@analog.com>
86 * bfin-sim.c (decode_dsp32shift_0): Use get_unextended_acc
87 rather than get_extended_acc in LSHIFT insns.
89 2011-06-18 Robin Getz <robin.getz@analog.com>
91 * bfin-sim.c (decode_macfunc): Handle MM when mmod is M_TFU.
92 Check MM once when mmod is M_FU to match M_TFU better.
94 2011-06-18 Robin Getz <robin.getz@analog.com>
96 * bfin-sim.c (decode_dsp32shiftimm_0): When shift is greater than
97 32, perform a left shift. Update the corresponding AV bit. Set
98 AZ when the low 32bits are also zero.
100 2011-06-18 Robin Getz <robin.getz@analog.com>
102 * bfin-sim.c (decode_dsp32shiftimm_0): With left shift vector insns,
103 call lshift only when count is positive. Otherwise, call ashiftrt.
104 With arithmetic right shift insns, call ashiftrt when the value is
105 small enough, otherwise call lshift.
107 2011-06-18 Robin Getz <robin.getz@analog.com>
109 * bfin-sim.c (extract_mult): Call saturate_s16 directly when
110 mmod is M_IH rather than computing the result by hand.
112 2011-06-18 Robin Getz <robin.getz@analog.com>
114 * bfin-sim.c (decode_macfunc): Add nosat_acc to track acc value
115 before saturation, set sat when more cases saturate, and set the
116 overflow bit based on these results. For M_TFU, M_IU, M_FU, and
117 M_W32, change the max values compared against.
118 (decode_dsp32mac_0): Delete v_i and add v_0 and v_1. Pass v_1
119 when processing MAC1 and pass v_0 when processing MAC0. Combine
120 the results into the V/VS ASTAT bits.
122 2011-06-18 Robin Getz <robin.getz@analog.com>
124 * bfin-sim.c (extract_mult): Call saturate_s32 when MM is set
125 and mmod is M_IU. Call saturate_s16 when MM is set and mmod
128 2011-06-18 Robin Getz <robin.getz@analog.com>
130 * bfin-sim.c (decode_multfunc): Call new is_macmod_signed, and
131 allow MM to sign extend all the time.
132 (decode_macfunc): Likewise. Drop sign extension of unsigned
135 2011-06-18 Robin Getz <robin.getz@analog.com>
137 * bfin-sim.c (saturate_s40_astat): Change ">=" to ">".
138 (decode_macfunc): Likewise when mmod is M_IH.
140 2011-06-18 Mike Frysinger <vapier@gentoo.org>
142 * interp.c (sim_create_inferior): Change free to freeargv.
144 2011-06-04 Mike Frysinger <vapier@gentoo.org>
146 * machs.c (bf534_dev, bf537_dev): Add glue-or devices.
147 (bf537_port): Define applicable devices with PORT to the glue-or
148 devices instead of SIC.
149 (bfin_model_hw_tree_init): Drop old sim_hw_parse call for bfin_sic.
150 Only parse reg/type when the device has an address. Move the call
151 to dv_bfin_hw_port_parse up before slash check.
153 2011-06-04 Mike Frysinger <vapier@gentoo.org>
155 * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Move above the
156 BFIN_SIC_TO_CEC_PORTS definition.
157 (SIC_PORTS): New define.
158 (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
159 bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
160 bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
162 (bfin_sic1_ports, bfin_sic2_ports, bfin_sic3_ports,
163 bfin_sic_561_ports): Define new layouts with SIC_PORTS().
164 (bfin_sic_finish): Change reference to bfin_sic_50x_ports,
165 bfin_sic_51x_ports, bfin_sic_52x_ports, and bfin_sic_538_ports
166 to bfin_sic2_ports. Change reference to bfin_sic_533_ports,
167 bfin_sic_537_ports, and bfin_sic_59x_ports to bfin_sic1_ports.
168 Change reference to bfin_sic_54x_ports to bfin_sic3_ports.
169 * machs.c (bfin_port_layout): New structure.
170 (bfin_model_data): Add new "port" and "port_count" members.
171 (PORT, SIC): New defines.
172 (bf000_port, bf50x_port, bf51x_port, bf52x_port, bf533_port,
173 bf537_port, bf538_port, bf54x_port, bf561_port, bf592_port):
174 Move and redefine port layout from dv-bfin_sic.c to here.
175 (bf504_port, bf506_port, bf512_port, bf514_port, bf516_port,
176 bf518_port, bf522_port, bf523_port, bf524_port, bf525_port,
177 bf526_port, bf527_port, bf531_port, bf532_port, bf534_port,
178 bf536_port, bf539_port, bf542_port, bf544_port, bf547_port,
179 bf548_port, bf549_port): New defines.
180 (bfin_model_data): Link in new bfin_port_layout.port member.
181 (dv_bfin_hw_port_parse): New function.
182 (dv_bfin_hw_parse): Call new dv_bfin_hw_port_parse function.
183 (bfin_model_hw_tree_init): Replace calls to sim_hw_parse for
184 bfin_sic links with new dv_bfin_hw_port_parse function.
186 2011-06-03 Mike Frysinger <vapier@gentoo.org>
188 * dv-bfin_dma.c (bfin_dma_io_write_buffer): Fix indentation.
190 2011-05-25 Mike Frysinger <vapier@gentoo.org>
192 * sim-main.h (TRACE_SYSCALL): Change EVENTS to SYSCALL.
194 2011-05-25 Mike Frysinger <vapier@gentoo.org>
196 * dv-bfin_cec.h (BFIN_COREMMR_CEC_{BASE,SIZE}): Move to ...
197 * dv-bfin_ctimer.h (BFIN_COREMMR_CTIMER_{BASE,SIZE}): Move to ...
198 * dv-bfin_dma.h (BFIN_MMR_DMA_SIZE): Move to ...
199 * dv-bfin_dmac.h (BFIN_MMR_DMAC{0,1}_BASE): Move to ...
200 * dv-bfin_ebiu_amc.h (BF{IN,50X,54X}_MMR_EBIU_AMC_SIZE): Move to ...
201 * dv-bfin_ebiu_ddrc.h (BFIN_MMR_EBIU_DDRC_SIZE): Move to ...
202 * dv-bfin_ebiu_sdc.h (BFIN_MMR_EBIU_SDC_SIZE): Move to ...
203 * dv-bfin_emac.h (BFIN_MMR_EMAC_{BASE,SIZE}): Move to ...
204 * dv-bfin_eppi.h (BFIN_MMR_EPPI_SIZE): Move to ...
205 * dv-bfin_evt.h (BFIN_COREMMR_EVT_{BASE,SIZE}): Move to ...
206 * dv-bfin_gpio.h (BFIN_MMR_GPIO_SIZE): Move to ...
207 * dv-bfin_gptimer.h (BFIN_MMR_GPTIMER_SIZE): Move to ...
208 * dv-bfin_jtag.h (BFIN_COREMMR_JTAG_{BASE,SIZE}): Move to ...
209 * dv-bfin_mmu.h (BFIN_COREMMR_MMU_{BASE,SIZE}): Move to ...
210 * dv-bfin_nfc.h (BFIN_MMR_NFC_SIZE): Move to ...
211 * dv-bfin_otp.h (BFIN_MMR_OTP_SIZE): Move to ...
212 * dv-bfin_pfmon.h (BFIN_COREMMR_PFMON_{BASE,SIZE}): Move to ...
213 * dv-bfin_pll.h (BFIN_MMR_PLL_{BASE,SIZE}): Move to ...
214 * dv-bfin_ppi.h (BFIN_MMR_PPI_SIZE): Move to ...
215 * dv-bfin_rtc.h (BFIN_MMR_RTC_SIZE): Move to ...
216 * dv-bfin_sic.h (BFIN_MMR_SIC_{BASE,SIZE}): Move to ...
217 * dv-bfin_spi.h (BFIN_MMR_SPI_SIZE): Move to ...
218 * dv-bfin_trace.h (BFIN_COREMMR_TRACE_{BASE,SIZE}): Move to ...
219 * dv-bfin_twi.h (BFIN_MMR_TWI_SIZE): Move to ...
220 * dv-bfin_uart.h (BFIN_MMR_UART_SIZE): Move to ...
221 * dv-bfin_uart2.h (BFIN_MMR_UART2_SIZE): Move to ...
222 * dv-bfin_wdog.h (BFIN_MMR_WDOG_SIZE): Move to ...
223 * dv-bfin_wp.h (BFIN_COREMMR_WP_{BASE,SIZE}): Move to ...
225 * machs.c: Delete all dv-bfin_*.h includes except for cec/dmac.
227 2011-05-25 Mike Frysinger <vapier@gentoo.org>
229 * Makefile.in (dv-bfin_pfmon.o): New target.
230 * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_pfmon.
231 * configure: Regenerated.
232 * dv-bfin_pfmon.c, dv-bfin_pfmon.h: New files.
233 * machs.c: Add include new bfin_pfmon.h.
234 (bfin_core_dev): Add pfmon.
236 2011-05-25 Mike Frysinger <vapier@gentoo.org>
238 * machs.c (bf526_roms): Add a region with rev of 2.
239 (bf54x_roms): Add regions with rev of 4.
240 * bfroms/all.h: Include new bf526-0.2.h, bf54x-0.4.h, and
241 bf54x_l1-0.4.h headers.
242 * bfroms/bf526-0.2.h, bfroms/bf54x-0.4.h, bfroms/bf54x_l1-0.4.h:
245 2011-05-14 Mike Frysinger <vapier@gentoo.org>
247 * bfin-sim.c (decode_PushPopReg_0): Delete (grp == 1 && reg == 6)
250 2011-05-14 Mike Frysinger <vapier@gentoo.org>
252 * dv-bfin_uart.c (bfin_uart_write_byte): Add a mcr arg. Declare a
253 local uart. When LOOP_ENA is set in mcr, write to the saved byte
254 and count fields of the uart.
255 (bfin_uart_io_write_buffer): Pass uart->mcr to bfin_uart_write_byte
256 and bfin_uart_get_next_byte.
257 (bfin_uart_get_next_byte): Add a mcr arg. Move uart->saved_count
258 check first, and skip the remaining code when LOOP_ENA is set in mcr.
259 * dv-bfin_uart.h (bfin_uart_write_byte): Add an mcr argument.
260 (bfin_uart_get_next_byte): Likewise.
261 (XOFF, MRTS, RFIT, RFRT, LOOP_ENA, FCPOL, ARTS, ACTS): Define.
262 * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Padd uart->mcr when
263 calling bfin_uart_write_byte and bfin_uart_get_next_byte.
265 2011-05-09 Mike Frysinger <vapier@gentoo.org>
267 * dv-bfin_uart2.c (bfin_uart_io_read_buffer): Clear DR/THRE/TEMT bits
268 from uart->lsr before setting them.
270 2011-04-27 Mike Frysinger <vapier@gentoo.org>
272 * dv-bfin_dmac.c (bfin_dmac): Constify pmap array.
273 (bfin_dmac_50x_pmap, bfin_dmac_51x_pmap, bfin_dmac_52x_pmap,
274 bfin_dmac_533_pmap, bfin_dmac_537_pmap, bfin_dmac0_538_pmap,
275 bfin_dmac1_538_pmap, bfin_dmac0_54x_pmap, bfin_dmac1_54x_pmap,
276 bfin_dmac0_561_pmap, bfin_dmac1_561_pmap, bfin_dmac_59x_pmap):
279 2011-04-26 Mike Frysinger <vapier@gentoo.org>
281 * dv-bfin_gpio.c (bfin_gpio_forward_ouput): New function.
282 (bfin_gpio_io_write_buffer): Store the current port state into
283 "data", and call bfin_gpio_forward_ouput when the data or dir
285 (bfin_gpio_ports): Change p0..p15 to bidirect_port.
287 2011-04-26 Mike Frysinger <vapier@gentoo.org>
289 * dv-bfin_gpio.c (bfin_gpio): Add "int_state" member.
290 (bfin_gpio_forward_int, bfin_gpio_forward_ints): New functions.
291 (bfin_gpio_io_write_buffer): Call bfin_gpio_forward_int when the
292 mask a or mask b MMRs are written.
293 (bfin_gpio_port_event): When handling edge gpios, set the bit in
294 int_state, call bfin_gpio_forward_ints, and then clear the bit.
295 When handling level gpios, clear/set the bit in int_state rather
296 than returning immediately. Call bfin_gpio_forward_ints instead
297 of checking mask[ab] and calling HW_TRACE/hw_port_event directly.
299 2011-04-16 Mike Frysinger <vapier@gentoo.org>
301 * bfin-sim.c (decode_dsp32alu_0): Call STORE instead of SET_DREG for
302 BYTEOP2P, BYTEOP3P, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK, and
304 (decode_dsp32shift_0): Call STORE instead of SET_DREG for PACK,
305 BITMUX, EXTRACT, DEPOSIT, ALIGN8, ALIGN16, and ALIGN24.
307 2011-04-14 Mike Frysinger <vapier@gentoo.org>
309 * bfin-sim.c (decode_dsp32alu_0): Set DIS_ALGN_EXPT when handling
310 BYTEOP2P, BYTEOP3P, SAA, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK,
311 and BYTEUNPACK insns.
313 2011-04-11 Mike Frysinger <vapier@gentoo.org>
315 * dv-bfin_sic.c (bfin_sic_port_event): New helper function.
316 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
317 bfin_sic_54x_port_event, bfin_sic_561_port_event): Include level
318 in the trace output, and call the new bfin_sic_port_event func.
320 2011-04-11 Mike Frysinger <vapier@gentoo.org>
322 * dv-bfin_gpio.c (bfin_gpio_ports): Add p15.
324 2011-04-01 Mike Frysinger <vapier@gentoo.org>
326 * dv-bfin_otp.c (bfin_otp_ports): Declare.
327 (bfin_otp_finish): Call set_hw_ports with bfin_otp_ports.
329 2011-03-29 Mike Frysinger <vapier@gentoo.org>
331 * configure: Regenerate after common/aclocal.m4 changes.
333 2011-03-28 Robin Getz <robin.getz@analog.com>
335 * bfin-sim.c (decode_dsp32alu_0): Cast high 16bits of A0.W to bs16
336 and add to casted low 16bits of A0.L and store in val0. Cast high
337 16bits of A1.W to bs16 and add to casted low 16bits of A1.L and
338 store in val1. Delete bit checks of val0 and val1.
340 2011-03-26 Robin Getz <robin.getz@analog.com>
342 * bfin-sim.c (decode_dsp32alu_0): Set result to 0x7FFFFFFF when
343 the result was 0x80000000 for RND12 subtraction.
345 2011-03-26 Robin Getz <robin.getz@analog.com>
347 * bfin-sim.c (decode_dsp32alu_0): Set VS when V is set.
349 2011-03-24 Mike Frysinger <vapier@gentoo.org>
351 * dv-bfin_gpio.c (bfin_gpio_port_event): Call HW_TRACE at every
352 major code flow point.
353 * dv-bfin_sic.c (bfin_sic_forward_interrupts): Call HW_TRACE just
354 before calling hw_port_event on ourselves.
355 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
356 bfin_sic_54x_port_event, bfin_sic_561_port_event): Call HW_TRACE
357 at the start of the function.
359 2011-03-24 Mike Frysinger <vapier@gentoo.org>
361 * dv-bfin_gpio.c (bfin_gpio_port_event): Split dir/inen bit checking.
362 Normalize "level" to 0/1 values. Shift "level" over by "my_port".
363 Invert port->both bit check.
365 2011-03-24 Mike Frysinger <vapier@gentoo.org>
367 * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Subtract 2 from the
368 valuep pointer for clear MMRs, 4 for set MMRs, and 6 for toggle MMRs.
370 2011-03-23 Mike Frysinger <vapier@gentoo.org>
372 * TODO: Document some known SIC issues.
374 2011-03-23 Mike Frysinger <vapier@gentoo.org>
376 * devices.h (dv_w1c): Fix typos in documentation of "bits" arg.
377 * dv-bfin_cec.c (bfin_cec_io_write_buffer): Pass 0xffee to dv_w1c_4.
378 * dv-bfin_emac.c (bfin_emac_io_write_buffer): Pass 0xe1 to dv_w1c_4
379 for systat MMR and -1 to dv_w1c_4 for [rt]x_stky/mmc_[rt]irqs MMRs.
380 * dv-bfin_eppi.c (bfin_eppi_io_write_buffer): Pass 0x1ff to dv_w1c_2.
381 * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Invert bits to dv_w1c_2.
382 * dv-bfin_jtag.c (bfin_jtag_io_write_buffer): Invert bits to dv_w1c_4.
383 * dv-bfin_nfc.c (bfin_nfc_io_write_buffer): Invert bits to dv_w1c_2.
384 * dv-bfin_otp.c (bfin_otp_io_write_buffer): Invert bits to dv_w1c_2.
385 * dv-bfin_ppi.c (bfin_ppi_io_write_buffer): Invert bits to dv_w1c_2.
386 * dv-bfin_rtc.c (bfin_rtc_io_write_buffer): Invert bits to dv_w1c_2.
387 * dv-bfin_spi.c (bfin_spi_io_write_buffer): Invert bits to dv_w1c_2.
388 * dv-bfin_twi.c (bfin_twi_io_write_buffer): Invert bits to dv_w1c_2.
389 * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Invert bits to dv_w1c_2.
391 2011-03-23 Mike Frysinger <vapier@gentoo.org>
393 * dv-bfin_uart.h (TFI, BI, FE, PE, OE): Define.
395 2011-03-23 Mike Frysinger <vapier@gentoo.org>
397 * dv-bfin_twi.h (LOSTARB): Rename from LOSTARG.
399 2011-03-23 Robin Getz <robin.getz@analog.com>
401 * bfin-sim.c (decode_dsp32shift_0): Set acc0 to the unextended
402 value for the VIT_MAX insn, and mask off the result when done.
404 2011-03-23 Robin Getz <robin.getz@analog.com>
406 * bfin-sim.c (decode_dsp32alu_0): Set A1 to a1_lo when up_hi is false,
407 and set A0 to a0_lo when up_lo is false.
409 2011-03-23 Robin Getz <robin.getz@analog.com>
411 * bfin-sim.c (decode_dsp32alu_0): Call saturate_s40_astat instead of
412 saturate_s40, and use the v parameter to update the AV bit. Set the
413 AC bit only when the final result is 0.
415 2011-03-23 Mike Frysinger <vapier@gentoo.org>
417 * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Define.
418 (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
419 bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
420 bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
421 Encode ids with the ENC macro.
422 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
423 bfin_sic_54x_port_event, bfin_sic_561_port_event): Set idx
424 from my_port with DEC_SIC, and set bit from my_port with DEC_PIN.
425 (bfin_sic_533_port_event): Delete.
426 (bfin_sic_finish): Call set_hw_port_event with
427 bfin_sic_537_port_event for BF533 and BF59x targets.
429 2011-03-23 Robin Getz <robin.getz@analog.com>
431 * bfin-sim.c (decode_dsp32alu_0): Drop the src0/src1 check for
432 BYTEOP1P, BYTEOP2P, and BYTEOP3P insns.
434 2011-03-23 Mike Frysinger <vapier@gentoo.org>
436 * machs.c (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev,
437 bf533_dev, bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev):
438 Change bfin_gpio addresses from f/g/h to 5/6/7.
439 (bfin_model_hw_tree_init): Add the bfin_gpio address base to 'a'.
441 2011-03-17 Mike Frysinger <vapier@gentoo.org>
443 * configure.ac (AC_CHECK_FUNCS): Check for kill and pread.
444 * configure: Regenerate.
445 * config.in: Regenerate.
446 * interp.c (bfin_syscall): Check for HAVE_{KILL,PREAD} before using
449 2011-03-15 Mike Frysinger <vapier@gentoo.org>
451 * Makefile.in (dv-bfin_gpio.o): New target.
452 * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio.
453 * configure: Regenerate.
454 * dv-bfin_gpio.c, dv-bfin_gpio.h: New files.
455 * machs.c: Include dv-bfin_gpio.h.
456 (bf50x_mem, bf51x_mem, bf52x_mem, bf531_mem, bf532_mem, bf533_mem,
457 bf534_mem, bf536_mem, bf537_mem, bf538_mem, bf561_mem, bf592_mem):
458 Delete GPIO memory stubs.
459 (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, bf533_dev,
460 bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): Add GPIO
462 (bfin_model_hw_tree_init): Hook up GPIO interrupts to SIC.
464 2011-03-15 Mike Frysinger <vapier@gentoo.org>
466 * bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, bfroms/bf51x-0.1.h,
467 bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, bfroms/bf526-0.1.h,
468 bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, bfroms/bf527-0.2.h,
469 bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, bfroms/bf533-0.3.h,
470 bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, bfroms/bf537-0.3.h,
471 bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, bfroms/bf54x-0.1.h,
472 bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, bfroms/bf54x_l1-0.1.h,
473 bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, bfroms/bf59x-0.0.h,
474 bfroms/bf59x_l1-0.1.h, dv-bfin_cec.c, dv-bfin_ctimer.c,
475 dv-bfin_dma.c, dv-bfin_dmac.c, dv-bfin_ebiu_amc.c,
476 dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_sdc.c, dv-bfin_emac.c,
477 dv-bfin_eppi.c, dv-bfin_evt.c, dv-bfin_gptimer.c, dv-bfin_jtag.c,
478 dv-bfin_mmu.c, dv-bfin_nfc.c, dv-bfin_otp.c, dv-bfin_pll.c,
479 dv-bfin_ppi.c, dv-bfin_rtc.c, dv-bfin_sic.c, dv-bfin_spi.c,
480 dv-bfin_trace.c, dv-bfin_twi.c, dv-bfin_uart.c, dv-bfin_uart2.c,
481 dv-bfin_wdog.c, dv-bfin_wp.c, dv-eth_phy.c, gui.c,
482 linux-fixed-code.h, linux-targ-map.h, machs.c, Makefile.in: Fix style.
484 2011-03-15 Robin Getz <robin.getz@analog.com>
486 * bfin-sim.c (decode_dsp32alu_0): Set AZ based on val for 16bit adds
489 2011-03-15 Robin Getz <robin.getz@analog.com>
491 * bfin-sim.c (decode_macfunc): Move acc STOREs behind op != 3 check.
493 2011-03-15 Robin Getz <robin.getz@analog.com>
495 * bfin-sim.c (decode_macfunc): New neg parameter. Set when the
496 high bit is set after extract_mult.
497 (decode_dsp32mac_0): Declare n_1 and n_0. Pass to the decode_macfunc
498 functions. Use these to update the AN bit.
500 2011-03-15 Robin Getz <robin.getz@analog.com>
502 * bfin-sim.c (decode_dsp32mult_0): Declare v_i0 and v_i1. Pass to
503 the extract_mult functions. Include these when updating the V, VS,
506 2011-03-15 Robin Getz <robin.getz@analog.com>
508 * bfin-sim.c (astat_names): New global bit array.
509 (decode_CC2stat_0): Delete local astat_name and astat_names.
510 (decode_psedodbg_assert_0): Move hardcoded offset into a variable.
511 Print out ASTAT bit values when checking an ASTAT register.
513 2010-03-15 Robin Getz <robin.getz@analog.com>
515 * bfin-sim.c (extract_mult): Handle M_IU.
517 2011-03-05 Mike Frysinger <vapier@gentoo.org>
519 * Makefile.in, TODO, aclocal.m4, bfin-sim.c, bfin-sim.h,
520 bfroms/all.h, bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h,
521 bfroms/bf51x-0.1.h, bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h,
522 bfroms/bf526-0.1.h, bfroms/bf527-0.0.h, bfroms/bf527-0.1.h,
523 bfroms/bf527-0.2.h, bfroms/bf533-0.1.h, bfroms/bf533-0.2.h,
524 bfroms/bf533-0.3.h, bfroms/bf537-0.0.h, bfroms/bf537-0.1.h,
525 bfroms/bf537-0.3.h, bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h,
526 bfroms/bf54x-0.1.h, bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h,
527 bfroms/bf54x_l1-0.1.h, bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h,
528 bfroms/bf59x-0.0.h, bfroms/bf59x_l1-0.1.h, config.in, configure,
529 configure.ac, devices.c, devices.h, dv-bfin_cec.c, dv-bfin_cec.h,
530 dv-bfin_ctimer.c, dv-bfin_ctimer.h, dv-bfin_dma.c, dv-bfin_dma.h,
531 dv-bfin_dmac.c, dv-bfin_dmac.h, dv-bfin_ebiu_amc.c, dv-bfin_ebiu_amc.h,
532 dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_ddrc.h, dv-bfin_ebiu_sdc.c,
533 dv-bfin_ebiu_sdc.h, dv-bfin_emac.c, dv-bfin_emac.h, dv-bfin_eppi.c,
534 dv-bfin_eppi.h, dv-bfin_evt.c, dv-bfin_evt.h, dv-bfin_gptimer.c,
535 dv-bfin_gptimer.h, dv-bfin_jtag.c, dv-bfin_jtag.h, dv-bfin_mmu.c,
536 dv-bfin_mmu.h, dv-bfin_nfc.c, dv-bfin_nfc.h, dv-bfin_otp.c,
537 dv-bfin_otp.h, dv-bfin_pll.c, dv-bfin_pll.h, dv-bfin_ppi.c,
538 dv-bfin_ppi.h, dv-bfin_rtc.c, dv-bfin_rtc.h, dv-bfin_sic.c,
539 dv-bfin_sic.h, dv-bfin_spi.c, dv-bfin_spi.h, dv-bfin_trace.c,
540 dv-bfin_trace.h, dv-bfin_twi.c, dv-bfin_twi.h, dv-bfin_uart.c,
541 dv-bfin_uart.h, dv-bfin_uart2.c, dv-bfin_uart2.h, dv-bfin_wdog.c,
542 dv-bfin_wdog.h, dv-bfin_wp.c, dv-bfin_wp.h, dv-eth_phy.c, gui.c,
543 gui.h, insn_list.def, interp.c, linux-fixed-code.h, linux-fixed-code.s,
544 linux-targ-map.h, machs.c, machs.h, proc_list.def, sim-main.h,
545 tconfig.in: New Blackfin port.