sim/configure.in

   1 dnl Process this file with autoconf to produce a configure script.
   2 AC_PREREQ(2.5)dnl
   3 AC_INIT(Makefile.in)
   4
   5 AC_PROG_CC
   6 AC_PROG_INSTALL
   7 AC_CHECK_TOOL(AR, ar)
   8 AC_CHECK_TOOL(RANLIB, ranlib, :)
   9
  10 AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/..)
  11 AC_CANONICAL_SYSTEM
  12 AC_ARG_PROGRAM
  13 AC_PROG_CC
  14 AC_SUBST(CFLAGS)
  15 AC_SUBST(HDEFINES)
  16 AR=${AR-ar}
  17 AC_SUBST(AR)
  18 AC_PROG_RANLIB
  19
  20 # Put a plausible default for CC_FOR_BUILD in Makefile.
  21 AC_C_CROSS
  22 if test "x$cross_compiling" = "xno"; then
  23   CC_FOR_BUILD='$(CC)'
  24 else
  25   CC_FOR_BUILD=gcc
  26 fi
  27 AC_SUBST(CC_FOR_BUILD)
  28
  29 # If a cpu ever has more than one simulator to choose from, use
  30 # --enable-sim=... to choose.
  31 AC_ARG_ENABLE(sim,
  32 [  --enable-sim ],
  33 [case "${enableval}" in
  34 yes | no) ;;
  35 *)      AC_MSG_ERROR(bad value ${enableval} given for --enable-sim option) ;;
  36 esac])
  37
  38 # Assume simulator can be built with cc.
  39 # If the user passes --enable-sim built it regardless of $(CC).
  40 only_if_gcc=no
  41 only_if_enabled=no
  42 extra_subdirs=common
  43
  44 # WHEN ADDING ENTRIES TO THIS MATRIX:
  45 #  Make sure that the left side always has two dashes.  Otherwise you
  46 #  can get spurious matches.  Even for unambiguous cases, do this as a
  47 #  convention, else the table becomes a real mess to understand and maintain.
  48
  49 case "${target}" in
  50   arm*-*-*)             sim_target=arm ;;
  51   thumb*-*-*)           sim_target=arm ;;
  52   d10v-*-*)             sim_target=d10v ;;
  53 # start-sanitize-d30v
  54   d30v-*-*)
  55         sim_target=d30v
  56         only_if_gcc=yes
  57         extra_subdirs="${extra_subdirs} igen"
  58         ;;
  59 # end-sanitize-d30v
  60   h8300*-*-*)           sim_target=h8300 ;;
  61   h8500-*-*)            sim_target=h8500 ;;
  62   m32r-*-*)             sim_target=m32r ;;
  63   mips*-*-*)
  64         # The MIPS simulator can only be compiled by gcc.
  65         sim_target=mips
  66         only_if_gcc=yes
  67         extra_subdirs="${extra_subdirs} igen"
  68         ;;
  69 # start-sanitize-sky
  70   txvu-*-*)
  71         # The Sky simulator
  72         sim_target=txvu
  73         only_if_gcc=yes
  74         extra_subdirs="${extra_subdirs} igen"
  75         ;;
  76 # end-sanitize-sky
  77   mn10300*-*-*)
  78         # The mn10300 simulator can only be compiled by gcc.
  79         sim_target=mn10300
  80         only_if_gcc=yes
  81         ;;
  82   mn10200*-*-*)
  83         sim_target=mn10200
  84         ;;
  85   sh*-*-*)              sim_target=sh ;;
  86   powerpc*-*-eabi* | powerpc*-*-solaris* | powerpc*-*-sysv4* | powerpc*-*-elf* | powerpc*-*-linux* )
  87         # The PowerPC simulator uses the GCC extension long long as well as
  88         # ANSI prototypes, so don't enable it for random host compilers
  89         # unless asked to.
  90         sim_target=ppc
  91         only_if_gcc=yes
  92         #extra_subdirs="${extra_subdirs}"
  93         ;;
  94 # start-sanitize-tic80
  95   tic80-*-*)
  96         sim_target=tic80
  97         only_if_gcc=yes
  98         extra_subdirs="${extra_subdirs} igen"
  99         ;;
 100 # end-sanitize-tic80
 101   v850-*-*)
 102         # The V850 simulator can only be compiled by gcc.
 103         sim_target=v850
 104         extra_subdirs="${extra_subdirs} igen"
 105         only_if_gcc=yes
 106         ;;
 107 # start-sanitize-v850e
 108   v850e-*-*)
 109         # The V850 simulator can only be compiled by gcc.
 110         sim_target=v850
 111         extra_subdirs="${extra_subdirs} igen"
 112         only_if_gcc=yes
 113         ;;
 114   v850ea-*-*)
 115         # The V850 simulator can only be compiled by gcc.
 116         sim_target=v850
 117         extra_subdirs="${extra_subdirs} igen"
 118         only_if_gcc=yes
 119         ;;
 120 # end-sanitize-v850e
 121   w65-*-*)
 122         sim_target=w65
 123         # The w65 is suffering from gradual decay.
 124         only_if_enabled=yes
 125         ;;
 126   z8k*-*-*)             sim_target=z8k ;;
 127   sparc64-*-*)
 128         sim_target=none # Don't build erc32 if sparc64.
 129         ;;
 130   sparc*-*-*)
 131         # The SPARC simulator can only be compiled by gcc.
 132         sim_target=erc32
 133         only_if_gcc=yes
 134         # Unfortunately erc32 won't build on many hosts, so only enable
 135         # it if the user really really wants it.
 136         only_if_enabled=yes
 137         ;;
 138   *)                    sim_target=none ;;
 139 esac
 140
 141
 142 # Is there a testsuite directory for the target?
 143 testdir=`echo ${target} | sed -e 's/-.*-/-/'`
 144 if test -r ${srcdir}/testsuite/${testdir}/configure ; then
 145   extra_subdirs="${extra_subdirs} testsuite"
 146 fi
 147
 148
 149 case "${enable_sim}" in
 150 no)     sim_target=none ;;
 151 yes)
 152         if test ${only_if_gcc} = yes ; then
 153                 if test "${GCC}" != yes ; then
 154                         echo "Can't enable simulator since not compiling with GCC."
 155                         sim_target=none
 156                 fi
 157         fi
 158         ;;
 159 *)
 160         if test ${only_if_enabled} = yes ; then
 161                 sim_target=none
 162         else
 163                 if test ${only_if_gcc} = yes ; then
 164                         if test "${GCC}" != yes ; then
 165                                 sim_target=none
 166                         fi
 167                 fi
 168         fi
 169         ;;
 170 esac
 171
 172 if test x"${sim_target}" != xnone ; then
 173         configdirs="${extra_subdirs} ${sim_target}"
 174         AC_CONFIG_SUBDIRS($configdirs)
 175 fi
 176
 177 AC_OUTPUT(Makefile)
 178
 179 exit 0