1 Mon Jan 3 02:06:07 2000 Andrew Cagney <cagney@b1.cygnus.com>
3 * interp.c (lookup_hash): Stop the update of the PC when there was
4 an illegal instruction exception.
6 Mon Jan 3 00:14:33 2000 Andrew Cagney <cagney@b1.cygnus.com>
8 * simops.c (address_exception): New function.
9 (OP_30000000, OP_6401, OP_6001, OP_6000, OP_32010000, OP_31000000,
10 OP_6601, OP_6201, OP_6200, OP_33010000, OP_34000000, OP_6800,
11 OP_6C1F, OP_6801, OP_6C01, OP_36010000, OP_35000000, OP_6A00,
12 OP_6E1F, OP_6A01, OP_6E01, OP_37010000): For "ld", "ld2w", "st"
13 and "st2w" check that the address is aligned.
15 1999-11-25 Nick Clifton <nickc@cygnus.com>
17 * simops.c (OP_4E0F): New function: Simulate new bit pattern for
20 Fri Oct 29 18:34:28 1999 Andrew Cagney <cagney@b1.cygnus.com>
22 * simops.c (move_to_cr): Don't allow user to set PSW.DM in either
25 Thu Oct 28 01:26:18 1999 Andrew Cagney <cagney@b1.cygnus.com>
27 * simops.c (OP_5F20): Use SET_HW_PSW when updating PSW.
28 (PSW_HW_MASK): Declare.
30 * d10v_sim.h (move_to_cr): Add ``psw_hw_p'' parameter.
31 (SET_CREG, SET_PSW_BIT): Update.
32 (SET_HW_CREG, SET_HW_PSW): Define.
34 Sun Oct 24 21:38:04 1999 Andrew Cagney <cagney@b1.cygnus.com>
36 * interp.c (sim_d10v_translate_dmap_addr): Fix extraction of IOSP
39 Sun Oct 24 16:04:16 1999 Andrew Cagney <cagney@b1.cygnus.com>
41 * interp.c (sim_d10v_translate_addr): New function.
42 (xfer_mem): Rewrite. Use sim_d10v_translate_addr.
43 (map_memory): Make INLINE.
45 Sun Oct 24 13:45:19 1999 Andrew Cagney <cagney@b1.cygnus.com>
47 * interp.c (sim_d10v_translate_dmap_addr): New function.
48 (dmem_addr): Rewrite. Use sim_d10v_translate_dmap_addr. Change
49 offset parameter to type uint16.
50 * d10v_sim.h (dmem_addr): Update declaration.
52 Sun Oct 24 13:07:31 1999 Andrew Cagney <cagney@b1.cygnus.com>
54 * interp.c (imap_register, set_imap_register, dmap_register,
55 set_imap_register): Use map_memory.
57 (sim_create_inferior): Initialize all DMAP registers. NOTE that
58 DMAP2, in internal memory mode, is set to 0x0000 and NOT
59 0x2000. This is consistent with the older d10v boards.
61 Sun Oct 24 11:22:12 1999 Andrew Cagney <cagney@b1.cygnus.com>
63 * interp.c (sim_d10v_translate_imap_addr): New function.
64 (imem_addr): Rewrite. Use sim_d10v_translate_imap_addr.
65 (last_from, last_to): Declare.
67 Sun Oct 24 01:21:56 1999 Andrew Cagney <cagney@b1.cygnus.com>
69 * d10v_sim.h (struct d10v_memory): Define. Support very long
71 (struct _state): Replace imem, dmem and umem by mem.
72 (IMAP_BLOCK_SIZE, DMAP_BLOCK_SIZE, SEGMENT_SIZE, IMEM_SEGMENTS,
73 DMEM_SEGMENTS, UMEM_SEGMENTS): Define.
75 * interp.c (map_memory): New function.
76 (sim_size, xfer_memory, imem_addr, dmem_addr): Update.
77 (UMEM_SEGMENTS): Moveed to "d10v_sim.h".
78 (IMEM_SIZEDMEM_SIZE): Delete.
80 Sat Oct 23 20:06:58 1999 Andrew Cagney <cagney@b1.cygnus.com>
82 * interp.c: Include "sim-d10v.h".
83 (imap_register, set_imap_register, dmap_register,
84 set_dmap_register, spi_register, spu_register, set_spi_register,
85 set_spu_register): New functions.
86 (sim_create_inferior): Update.
87 (sim_fetch_register, sim_store_register): Rewrite. Use enums
88 defined in sim-d10v.h.
90 * d10v_sim.h (DEBUG_MEMORY): Define.
91 (IMAP0, IMAP1, DMAP, SET_IMAP0, SET_IMAP1, SET_DMAP): Delete.
93 Sat Oct 23 18:41:18 1999 Andrew Cagney <cagney@b1.cygnus.com>
95 * interp.c (sim_open): Allow a debug value to be passed to the -t
97 (lookup_hash): Don't exit on an illegal instruction.
98 (do_long, do_2_short, do_parallel): Check for failed instruction
101 Mon Oct 18 18:03:24 MDT 1999 Diego Novillo <dnovillo@cygnus.com>
103 * simops.c (OP_3220): Fix trace output for illegal accumulator
106 1999-09-14 Nick Clifton <nickc@cygnus.com>
108 * simops.c: Disable setting of DM bit in PSW.
110 Wed Sep 8 19:34:55 MDT 1999 Diego Novillo <dnovillo@cygnus.com>
112 * simops.c (op_types): Added new memory indirect type OP_MEMREF3.
113 (trace_input_func): Added support for OP_MEMREF3.
114 (OP_32010000): New instruction ld.
115 (OP_33010000): New instruction ld2w.
116 (OP_5209): New instruction sac.
117 (OP_4209): New instruction sachi.
118 (OP_3220): New instruction slae.
119 (OP_36010000): New instruction st.
120 (OP_37010000): New instruction st2w.
122 1999-09-09 Stan Shebs <shebs@andros.cygnus.com>
124 * interp.c (old_segment_mapping): New global.
125 (xfer_mem): Change the default segment mapping to be the way
126 that Mitsubishi prefers, but use the previous mapping if
127 old_segment_mapping is true.
128 (sim_open): Add an option -oldseg to get the old mapping.
129 (sim_create_inferior): Init mapping registers based on the
130 value of old_segment_mapping.
132 1999-09-07 Nick Clifton <nickc@cygnus.com>
134 * simops.c (OP_6601): Do not write back decremented address if
135 either of the destination registers was the same as the address
137 (OP_6201): Do not write back incremented address if either of the
138 destination registers was the same as the address register.
140 Thu Sep 2 18:15:53 1999 Andrew Cagney <cagney@b1.cygnus.com>
142 * configure: Regenerated to track ../common/aclocal.m4 changes.
144 1999-05-08 Felix Lee <flee@cygnus.com>
146 * configure: Regenerated to track ../common/aclocal.m4 changes.
148 1999-04-02 Keith Seitz <keiths@cygnus.com>
150 * interp.c (ui_loop_hook_counter): New global (when NEED_UI_LOOP_HOOK
152 (sim_resume): If the counter has expired, call the ui_loop_hook,
154 (UI_LOOP_POLL_INTERVAL): Define. Used to tweak the frequency of
156 * Makefile.in (SIM_EXTRA_CFLAGS): Include NEED_UI_LOOP_HOOK.
158 Wed Mar 10 19:32:13 1999 Nick Clifton <nickc@cygnus.com>
160 * simops.c: If load instruction with auto increment/decrement
161 addressing is used when the destination register is the same as
162 the address register, then ignore the auto increment/decrement.
164 Wed Mar 10 19:32:13 1999 Martin M. Hunt <hunt@cygnus.com>
166 * simops.c (OP_5F00): Ifdef SYS_stat case because
167 not all systems have it defined.
169 1999-01-26 Jason Molenda (jsm@bugshack.cygnus.com)
171 * simops.c (OP_5607): Correct saturation comparison/assignment.
172 (OP_1201, OP_1203, OP_17001200, OP_17001202,
173 OP_2A00, OP_2800, OP_2C00, OP_3200, OP_3201,
174 OP_1001, OP_1003, OP_17001000, OP_17001002): Ditto.
176 1999-01-26 Jason Molenda (jsm@bugshack.cygnus.com)
178 * simops.c (OP_5605): Sign extend MIN32 and MAX32 before saturation
184 1999-01-13 Jason Molenda (jsm@bugshack.cygnus.com)
186 * simops.c (OP_1223): Sign extend MIN32 and MAX32 before saturation
189 Tue Nov 24 17:04:43 1998 Andrew Cagney <cagney@b1.cygnus.com>
191 * simops.c (sys/syscall.h): Include targ-vals.h instead.
192 (SYS_*): Replace with TARGET_SYS_*.
194 * Makefile.in: Add dependency on targ-vals.h.
195 (NL_TARGET): Define as NL_TARGET_d10v.
197 Wed Sep 30 00:06:32 1998 Andrew Cagney <cagney@amy.cygnus.com>
199 * interp.c (xfer_mem): Missing break, instruction memory case
200 flowed into unified memory case.
202 Wed Sep 30 10:14:18 1998 Nick Clifton <nickc@cygnus.com>
204 * simops.c: If load instruction with auto increment/decrement
205 addressing is used when the destination register is the same as
206 the address register, then ignore the auto increment/decrement.
208 Tue Apr 28 18:33:31 1998 Geoffrey Noer <noer@cygnus.com>
210 * configure: Regenerated to track ../common/aclocal.m4 changes.
212 Sun Apr 26 15:31:55 1998 Tom Tromey <tromey@creche>
214 * configure: Regenerated to track ../common/aclocal.m4 changes.
217 Sun Apr 26 15:20:23 1998 Tom Tromey <tromey@cygnus.com>
219 * acconfig.h: New file.
220 * configure.in: Reverted change of Apr 24; use sinclude again.
222 Fri Apr 24 14:16:40 1998 Tom Tromey <tromey@creche>
224 * configure: Regenerated to track ../common/aclocal.m4 changes.
227 Fri Apr 24 11:20:06 1998 Tom Tromey <tromey@cygnus.com>
229 * configure.in: Don't call sinclude.
231 Fri Apr 24 11:04:46 1998 Andrew Cagney <cagney@chook.cygnus.com>
233 * interp.c (struct hash_entry): OPCODE and MASK are unsigned.
235 * d10v_sim.h (remote-sim.h, sim-config.h): Include.
237 Sat Apr 4 20:36:25 1998 Andrew Cagney <cagney@b1.cygnus.com>
239 * configure: Regenerated to track ../common/aclocal.m4 changes.
241 Wed Apr 1 12:59:17 1998 Andrew Cagney <cagney@b1.cygnus.com>
243 * simops.c (trace_input_func): Use move_from_cr / CREGS to obtain
245 (OP_OP_1000000, add3): Trace inputs before performing add.
246 (OP_5F00, <*>): Trace input registers before making system call.
247 (OP_5F00, <kill>): Trace R0, R1 not REGn.
248 (OP_5F00, <getpid>): Always return 47.
250 * d10v_sim.h (SLOT, SLOT_NR, SLOT_PEND_MASK, SLOT_PEND,
251 SLOT_DISCARD, SLOT_FLUSH): Define. An implementation of write
253 (struct _state): Add struct slot slot to global state variable.
254 (struct _state): Delete fields SM, EA, DB, DM, IE, RP, MD, FX, ST,
255 F0, F1, C from global State variable.
256 (struct _state): Add struct trace to global State variable.
257 (GPR, SET_GPR): Define. SET_GPR uses SLOT_PEND.
258 (PSW*, SET_PSW*): Define. SET_PSW* uses SET_CREG.
259 (CREG, SET_CREG, SET_*): Define. SET_CREG uses func move_to_cr.
260 (INC_ADDR): Re-implement. Use SET_GPR to update registers.
261 (JMP): Re-implement. Use SET_* to update registers.
263 * interp.c: Use new SET_* et.al. macros to fetch / store
265 (get_operands): Squirrel away trace values at start of each
267 (do_2_short): Flush pending writes before issuing second
269 (sim_resume): Flush pending writes at end of instruction cycle.
270 (sim_fetch_register, sim_store_register, sim_create_inferior):
271 After scheduling updates to registers using SET_*, flush updates.
272 (sim_resume): Re-order handling of RPT/repeat and IBA/hbreak so
273 that each sets pc using SET_* and last SET_* eventually winds out.
275 * simops.c: Use new SET_* et.al. macros to fetch / store
277 (move_to_cr): Add MASK argument for selective update of CREG bits.
278 Re-implement using new SET_* macros.
279 (trace_output_func, trace_output): Delete. Replace with.
280 (do_trace_output_flush, trace_output_finish, trace_output_40,
281 trace_output_32, trace_output_16, trace_output_void,
282 trace_output_flag): New functions. Handle specific trace cases.
283 (OP_*): Re-write tracing to use new trace_output_* functions.
284 (OP_*): Re-write to use new SET_* et.al. macros.
285 (FUNC, PARM[1-4], RETVAL, RETVAL32): Redo definition.
286 (RETVAL_HIGH, RETVAL_LOW): Delete, use RETVAL32.
288 Wed Apr 1 12:55:18 1998 Andrew Cagney <cagney@b1.cygnus.com>
290 * configure.in (SIM_AC_OPTION_WARNINGS): Add.
291 configure: Re-generate.
293 Fri Mar 27 16:15:52 1998 Andrew Cagney <cagney@b1.cygnus.com>
295 * configure: Regenerated to track ../common/aclocal.m4 changes.
297 Wed Mar 25 12:35:29 1998 Andrew Cagney <cagney@b1.cygnus.com>
299 * configure: Regenerated to track ../common/aclocal.m4 changes.
301 Wed Mar 18 12:38:12 1998 Andrew Cagney <cagney@b1.cygnus.com>
303 * configure: Regenerated to track ../common/aclocal.m4 changes.
305 Tue Feb 17 12:38:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
307 * interp.c (sim_store_register, sim_fetch_register): Pass in
308 length parameter. Return -1.
310 Mon Oct 27 14:43:33 1997 Fred Fish <fnf@cygnus.com>
312 * (dmem_addr): If address is illegal or in I/O space, signal a bus
313 error. Allocate unified memory on demand. Fix DMEM address
316 Mon Feb 16 10:27:53 1998 Andrew Cagney <cagney@b1.cygnus.com>
318 * simops.c (OP_5F20): Implement "dbt".
319 (OP_5F60): Implement "rtd".
321 * d10v_sim.h (DPC_CR): Define enum.
322 (DBT_VECTOR_START): Define
325 Fri Feb 13 15:15:58 1998 Andrew Cagney <cagney@b1.cygnus.com>
327 * simops.c (move_to_cr): Sync regs[SP_IDX] with State.sp according
330 * d10v_sim.h (struct _state): Add sp, as holding area for SPI/SPU.
333 Wed Feb 11 16:53:49 1998 Andrew Cagney <cagney@b1.cygnus.com>
335 * simops.c (OP_5F00): Call error instead of abort for unknown
338 * d10v_sim.h (enum): Define DPSW_CR.
340 * simops.c (move_to_cr): Mask out hardwired zero bits in DPSW.
342 Tue Feb 10 18:28:38 1998 Andrew Cagney <cagney@b1.cygnus.com>
344 * interp.c (sim_write_phys): Delete.
345 (sim_load): Call sim_load_file with sim_write and LMA.
347 Mon Feb 9 12:05:01 1998 Andrew Cagney <cagney@b1.cygnus.com>
349 * interp.c: Rewrite xfer_mem so that it translates addresses as -
350 0x00... - DMAP translated memory, 0x01... IMAP translated memory,
351 0x10... - on-chip data, 0x11... - on-chip insn, 0x12... - unified
354 (imem_addr): New function - translate IMEM address.
355 (sim_resume): Use imem_addr to translate insn address, abort if
357 (sim_create_inferior): Write ARGV to memory using sim_write. Pass
358 argc/argv using r0/r1 not r2/r3.
359 (sim_size): Do not initialize IMAP/DMAP here.
360 (sim_open): Call sim_create_inferior and sim_size to initialize
362 (sim_create_inferior): Initialize IMAP/DMAP to hardware reset
364 (init_system): Delete.
365 (xfer_mem, sim_fetch_register, sim_store_register): Do not call
367 (decode_pc): Check prog_bfd is defined before looking up .text
370 Sun Feb 1 16:47:51 1998 Andrew Cagney <cagney@b1.cygnus.com>
372 * configure: Regenerated to track ../common/aclocal.m4 changes.
374 Sat Jan 31 18:15:41 1998 Andrew Cagney <cagney@b1.cygnus.com>
376 * configure: Regenerated to track ../common/aclocal.m4 changes.
378 Sun Jan 25 22:23:01 1998 Michael Meissner <meissner@cygnus.com>
380 * interp.c (sim_stop_reason): Exit status is now in r0, not r2.
382 Sat Jan 24 19:00:30 1998 Michael Meissner <meissner@cygnus.com>
384 * d10v_sim.h (DEBUG_TRAP): New debug flag.
386 * simops.c (OP_5F00): If DEBUG_TRAP is on, turn traps 0-14 into
387 printing the registers.
389 Thu Jan 22 17:54:01 1998 Michael Meissner <meissner@cygnus.com>
391 * simops.c (op_types): New ABI, args are r0..r3, system call # is
393 (trace_{in,out}put_func): Ditto.
395 (OP_24800000): Ditto.
399 Thu Jan 22 14:30:36 1998 Fred Fish <fnf@cygnus.com>
401 * interp.c (UMEM_SEGMENTS): New define, set to 128.
402 (sim_size): Use UMEM_SEGMENTS rather than hardwired constant.
403 (sim_close): Reset prog_bfd to NULL after closing it. Also
404 reset prog_bfd_was_opened_p after closing prog_bfd.
405 (sim_load): Reset prog_bfd_was_opened_p after closing prog_bfd.
406 (sim_create_inferior): Get start address from abfd not prog_bfd.
407 (xfer_mem): Do bounds checking on addresses and return zero length
408 read/write on bad addresses, rather than aborting. Prepare to
409 be able to handle xfers that cross segment boundaries, but not
410 yet implemented. Only emit debug message when d10v_debug is
411 set as well as DEBUG being defined.
413 Mon Jan 19 22:26:29 1998 Doug Evans <devans@seba>
415 * configure: Regenerated to track ../common/aclocal.m4 changes.
417 Mon Dec 15 23:17:11 1997 Andrew Cagney <cagney@b1.cygnus.com>
419 * configure: Regenerated to track ../common/aclocal.m4 changes.
422 Tue Dec 9 10:28:31 1997 Andrew Cagney <cagney@b1.cygnus.com>
424 * d10v_sim.h (RPT_S): Index cregs with RPT_S_CR not RPT_E_CR.
425 (BPSW): Ditto for BPSW_CR and not PSW_CR.
427 * simops.c (OP_5F40): JMP to BPC instead of assigning PC directly.
429 Mon Dec 8 12:58:33 1997 Andrew Cagney <cagney@b1.cygnus.com>
431 * simops.c (OP_5F00): From Martin Hunt <hunt@cygnus.com>. Change
432 reserved trap from 0 to 15. Add trap emulation code for 0-14.
434 * interp.c (sim_resume): From Martin Hunt <hunt@cygnus.com>. Check
437 * d10v_sim.h (AE_VECTOR_START, RIE_VECTOR_START,
438 SDBT_VECTOR_START, TRAP_VECTOR_START): Define.
440 * simops.c (OP_5F00): For "trap", mask out all but SM bit in PSW,
442 (OP_5F00): For "trap", update BPSW with move_to_cr.
444 Fri Dec 5 15:31:17 1997 Andrew Cagney <cagney@b1.cygnus.com>
446 * d10v_sim.h (enum): Enumerate CR register names.
447 (enum): Enumerate PSW bit values.
448 (PSW): Obtain value uing move_from_cr.
449 (MOD_S, MOD_E, BPSW): Make r-values.
450 (move_from_cr, move_to_cr): Declare functions.
452 * interp.c (sim_fetch_register, sim_store_register): Use
453 move_from_cr and move_to_cr for CR register transfers.
455 * simops.c (move_from_cr, move_to_cr): New functions.
456 (OP_5F40): Move BPSW to PSW using move_to_cr and move_from_cr.
457 (OP_5600): For "mvtc", use function move_to_cr.
458 (OP_5200): For "mvfc", use function move_from_cr.
460 Fri Dec 5 13:33:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
462 * simops.c (OP_5600): For "mvtc" MOD_E and MOD_S, ensure that the
465 Thu Dec 4 09:21:05 1997 Doug Evans <devans@canuck.cygnus.com>
467 * configure: Regenerated to track ../common/aclocal.m4 changes.
469 Thu Dec 4 16:51:02 1997 Andrew Cagney <cagney@b1.cygnus.com>
471 * d10v_sim.h (struct _state): Add DM - PSW debug mask.
473 * simops.c (OP_5600): For "mvtc", save PSW.DM.
474 (OP_5200): Ditto for "mvfc".
476 Wed Dec 3 17:27:06 1997 Andrew Cagney <cagney@b1.cygnus.com>
478 * d10v_sim.h (SEXT56): Define.
480 * simops.c (OP_4201): For "rac", sign extend 56 bit value before
483 * d10v_sim.h (MAX32, MIN32, MASK32, MASK40): Re-define using
486 Tue Dec 2 15:38:34 1997 Fred Fish <fnf@cygnus.com>
488 * interp.c (sim_resume): Call do_2_short with LEFT_FIRST or
489 RIGHT_FIRST, as appropriate, instead of hardcoded ints that
490 don't match enum values.
492 Tue Dec 2 15:01:08 1997 Andrew Cagney <cagney@b1.cygnus.com>
494 * simops.c (OP_3A00): For "macu", perform multiply stage using 32
495 bit rather than 16 bit precision.
496 (OP_3C00): For "mulxu", store unsigned product in ACC.
497 (OP_3800): For "msbu", subtract unsigned product from ACC,
498 (OP_0): For "sub", compute carry by comparing inputs.
500 Tue Dec 2 11:04:37 1997 Andrew Cagney <cagney@b1.cygnus.com>
502 * simops.c (OP_1000): For "sub2w", compute carry by comparing
505 Mon Nov 17 20:57:21 1997 Andrew Cagney <cagney@b1.cygnus.com>
507 * simops.c (OP_1): Use 32 bit unsigned arithmetic for subtract,
508 carry indicated by value > 0xffff.
510 Fri Nov 14 12:51:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
512 * interp.c (sim_resume): Don't set up SIGINT handler using signal,
514 (sim_resume): Fix race condition of a direct assignment to
515 stop_simulator, conditionally call sim_stop.
516 (sim_stop_reason): Check stop_simulator returning SIGINT. Clear
517 stop_simulator ready for next sim_resume call.
518 (sim_ctrl_c): Delete function.
520 Thu Nov 13 19:29:34 1997 Andrew Cagney <cagney@b1.cygnus.com>
522 * interp.c (sim_resume): For "REP", only check/update the PC when
523 a branch instruction has not been executed.
525 Mon Nov 10 17:50:18 1997 Andrew Cagney <cagney@b1.cygnus.com>
527 * simops.c (OP_4201): "rachi". Sign extend bit 40 of ACC. Sign
528 extend bit 44 all constants.
529 (OP_4201): Replace GCC specific 0x..LL with SIGNED64 macro.
531 Fri Oct 24 10:26:29 1997 Andrew Cagney <cagney@b1.cygnus.com>
533 * d10v_sim.h: Include sim-types.h.
534 (uint8, in816, uiny16, int32, uint32, int64, uint64): Typedef
535 using unsigned8 et.al. from sim-types.h.
536 (SEXT32, SEXT40, SEXT44, SEXT60): Replace GCC specific 0x..LL with
539 Wed Oct 22 14:43:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
541 * interp.c (sim_write_phys): New function, write to physical
542 instead of virtual memory.
544 * interp.c (sim_load): Pass lma_p and sim_write_phys to
547 Mon Oct 13 10:55:07 1997 Fred Fish <cygnus.com>
549 * simops.c (OP_6A01): Change OP_POSTDEC to OP_POSTINC and move
550 exception generation code to OP_6E01.
551 (OP_6E01): Change OP_POSTINC to OP_POSTDEC and insert exception
554 Sat Oct 11 09:02:08 1997 Fred Fish <fnf@cygnus.com>
556 * simops.c (OP_6401): postdecrement on r15 is OK, remove exception.
559 Fri Oct 3 09:28:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
561 * configure: Regenerated to track ../common/aclocal.m4 changes.
563 Sat Sep 27 12:51:34 1997 Fred Fish <fnf@cygnus.com>
565 * interp.c (pc_addr): Discard upper bit(s) of PC in case
566 IMAP1 selects unified memory.
567 * d10v_sim.h (INC_ADDR): Align MOD_E to increment before testing
570 Wed Sep 24 17:38:57 1997 Andrew Cagney <cagney@b1.cygnus.com>
572 * configure: Regenerated to track ../common/aclocal.m4 changes.
574 Tue Sep 23 11:04:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
576 * configure: Regenerated to track ../common/aclocal.m4 changes.
578 Mon Sep 22 11:46:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
580 * configure: Regenerated to track ../common/aclocal.m4 changes.
582 Fri Sep 19 17:45:25 1997 Andrew Cagney <cagney@b1.cygnus.com>
584 * configure: Regenerated to track ../common/aclocal.m4 changes.
586 Mon Sep 15 17:36:15 1997 Andrew Cagney <cagney@b1.cygnus.com>
588 * configure: Regenerated to track ../common/aclocal.m4 changes.
590 Wed Sep 10 22:30:24 1997 Martin M. Hunt <hunt@cygnus.com>
592 * interp.c (sim_resume): Increment PC at end of rep
595 * simops.c (OP_4201): Fix rachi instruction.
597 Thu Sep 4 17:21:23 1997 Doug Evans <dje@seba>
599 * configure: Regenerated to track ../common/aclocal.m4 changes.
601 Wed Aug 27 18:13:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
603 * configure: Regenerated to track ../common/aclocal.m4 changes.
606 Tue Aug 26 10:37:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
608 * interp.c (sim_kill): Delete.
609 (sim_create_inferior): Add ABFD argument.
610 (sim_load): Move setting of PC from here.
611 (sim_create_inferior): To here.
612 (start_address): Delete variable.
614 Mon Aug 25 17:50:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
616 * configure: Regenerated to track ../common/aclocal.m4 changes.
619 Mon Aug 25 15:39:29 1997 Andrew Cagney <cagney@b1.cygnus.com>
621 * interp.c (sim_open): Add ABFD argument.
623 Tue May 20 10:14:45 1997 Andrew Cagney <cagney@b1.cygnus.com>
625 * interp.c (sim_open): Add callback argument.
626 (sim_set_callbacks): Remove SIM_DESC argument.
628 Thu Apr 24 00:39:51 1997 Doug Evans <dje@canuck.cygnus.com>
630 * configure: Regenerated to track ../common/aclocal.m4 changes.
632 Tue Apr 22 10:29:23 1997 Doug Evans <dje@canuck.cygnus.com>
634 * interp.c (sim_open): Undo patch to add -E support.
636 Fri Apr 18 13:39:01 1997 Andrew Cagney <cagney@b1.cygnus.com>
638 * interp.c (sim_stop): New function.
640 Thu Apr 17 02:42:00 1997 Doug Evans <dje@canuck.cygnus.com>
642 * Makefile.in (SIM_OBJS): Add sim-load.o.
643 * d10v_sim.h (exec_bfd): Rename to prog_bfd.
644 * interp.c: #include bfd.h.
645 (myname, sim_kind, start_address): New static locals.
646 (prog_bfd_was_opened_p, prog_bfd): New static locals.
647 (decode_pc): Update to use prog_bfd.
648 (sim_open): Set sim_kind, myname. Ignore -E arg.
649 (sim_close): Close prog_bfd if simulator opened it.
650 (sim_create_inferior): Return SIM_RC. Delete arg start_address.
651 (sim_load): Return SIM_RC. New arg abfd. Set start address from bfd.
652 Call sim_load_file to load file into simulator.
653 * simops.c (trace_input_func): exec_bfd renamed to prog_bfd.
655 Wed Apr 16 16:12:03 1997 Andrew Cagney <cagney@b1.cygnus.com>
657 * simops.c (OP_5F00): Only provide system calls SYS_execv,
658 SYS_wait, SYS_wait, SYS_utime, SYS_time if defined by the host.
660 Mon Apr 7 15:45:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
662 * configure: Regenerated to track ../common/aclocal.m4 changes.
665 Wed Apr 2 15:06:28 1997 Doug Evans <dje@canuck.cygnus.com>
667 * interp.c (sim_open): New arg `kind'.
669 * configure: Regenerated to track ../common/aclocal.m4 changes.
671 Wed Apr 2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
673 * configure: Regenerated to track ../common/aclocal.m4 changes.
675 Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
677 * configure: Re-generate.
679 Fri Mar 14 10:34:11 1997 Michael Meissner <meissner@cygnus.com>
681 * configure: Regenerate to track ../common/aclocal.m4 changes.
683 * simops.c (OP_5F00): Remove old traps 1-3. Make trap 15 the same
684 as trap 0, which will be deprecated. Only set errno, if an error
685 in fact was returned.
687 Thu Mar 13 12:41:20 1997 Doug Evans <dje@canuck.cygnus.com>
689 * interp.c: Delete redundant prototypes of sim_foo fns.
690 (sim_open): New SIM_DESC result. Argument is now in argv form.
691 (other sim_*): New SIM_DESC argument.
693 Thu Mar 13 10:29:04 1997 Michael Meissner <meissner@cygnus.com>
695 * simops.c (trace_{input,output}_func): Call flush_stdout from the
698 (OP_6{4,6,C,A}01): Test for post decrement on the stack pointer.
699 (OP_{1200,1000000,201,5FE0,1003,17001002}): Fix problems in
700 setting the carry bit after an add or a subtract.
702 Wed Feb 12 16:04:15 1997 Michael Meissner <meissner@cygnus.com>
704 * simops.c (OP_{1403,15002A02,3{0,4}0{0,1}}): Only use the bottom
705 40 bits of accumulators. Sign/zero extend as appropriate.
707 Tue Feb 4 13:33:30 1997 Doug Evans <dje@canuck.cygnus.com>
709 * Makefile.in (@COMMON_MAKEFILE_FRAG): Use
710 COMMON_{PRE,POST}_CONFIG_FRAG instead.
711 * configure.in: sinclude ../common/aclocal.m4.
712 * configure: Regenerated.
714 Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com)
716 * configure configure.in Makefile.in: Update to new configure
717 scheme which is more compatible with WinGDB builds.
718 * configure.in: Improve comment on how to run autoconf.
719 * configure: Re-run autoconf to get new ../common/aclocal.m4.
720 * Makefile.in: Use autoconf substitution to install common
723 Fri Dec 27 22:54:05 1996 Angela Marie Thomas (angela@cygnus.com)
725 * gencode.c: patch to not #include "d10v_sim.h" which
726 unecessarily includes bfd.h and causes wingdb configure
729 Mon Dec 16 13:39:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
731 * interp.c (xfer_mem): Change unified memory to 0x0.
733 Thu Nov 28 20:42:56 1996 Michael Meissner <meissner@tiktok.cygnus.com>
735 * simops.c (OP_3E01): Fix tracing information.
736 (OP_300{0,1}): Do not propigate sign.
738 Mon Nov 25 19:47:40 1996 Doug Evans <dje@canuck.cygnus.com>
740 * config.in (WORDS_BIGENDIAN): Add.
741 * configure: Regenerated.
742 * d10v_sim.h: #include "config.h"
744 Sat Nov 23 09:34:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
746 * gencode.c (write_opcodes): Eliminate warnings when generated
749 Wed Nov 20 19:41:40 1996 Michael Meissner <meissner@tiktok.cygnus.com>
751 * interp.c (sim_open): Cast result of calloc, and make sure NULL
753 (dmem_addr): If address is illegal or in I/O space, signal a bus
755 (pc_addr): Signal bus error, not illegal instruction for bogus
758 Wed Nov 20 01:23:03 1996 Doug Evans <dje@canuck.cygnus.com>
760 * Makefile.in: Delete all stuff moved to ../common/Make-common.in.
761 (SIM_OBJS,SIM_EXTRA_CFLAGS,SIM_EXTRA_CLEAN): Define.
762 * configure.in: Simplify using macros in ../common/aclocal.m4.
763 Call AC_CHECK_HEADERS(unistd.h).
764 * configure: Regenerated.
765 * config.in: New file.
766 * interp.c: #include "callback.h".
767 * simops.c: #include "config.h". #include <unistd.h> if present.
769 Fri Nov 8 16:19:55 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
771 * d10v-sim.h (simops): Add flag is_long.
772 (State): Add pc_changed. Instructions which update the PC should
773 use the JMP macro which sets this.
774 (JMP): New macro. Sets the PC and the pc_changed flag.
776 * gencode.c (write_opcodes): Add is_long field.
778 * interp.c (lookup_hash): If we blindly apply a short opcode's mask
779 to a long opcode we could get a false match. Check the opcode size.
780 (hash): Add a size field to the hash table.
781 (sim_open): Initialize size field in hash table.
782 (sim_resume): Change to logic for setting the PC. Used to increment the
783 PC if it had not been changed. This didn't allow single-instruction loops.
784 Now checks the flag State.pc_changed. Also now stops when ^C is received.
785 (dmem_addr): Fix translation of data segments to unified memory.
786 (sim_ctrl_c): New function. When ^C is received, set stop_simulator flag.
788 * simops.c: Changed all branch and jump instructions to use new JMP macro.
789 (OP_20000000): Corrected trace information to show this is a ldi.l, not
792 Thu Oct 31 19:13:55 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
794 * interp.c (sim_fetch_register, sim_store_register): Fix bug where
795 updating the accumulators was overwriting other parts of the global
798 Wed Oct 30 17:35:14 1996 Michael Meissner <meissner@tiktok.cygnus.com>
800 * interp.c (bfd.h) Don't include it here any more.
801 (text{,_start,_end}): Move here from simops.c and make extern.
802 (decode_pc): New function to return the PC as an address that the
804 (dmem_addr): Print decoded PC in error message.
807 * simops.c (bfd.h) Don't include it here any more.
808 (text{,_start,_end}): Move to simops.c.
809 (trace_input_func): Move decoding of PC, and looking up .text
812 * d10v_sim.h (bfd.h): Include it here.
813 (text{,_start,_end}): Add external declarations.
817 Tue Oct 29 12:13:52 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
819 * interp.c (sim_size): Now allocates unified memory for imap segments
820 0,1,2, and 127. Initializes imap0 and imap1 to 0x1000. Initializes dmap to 0.
821 (sim_write): Just call xfer_mem().
822 (sim_read): Just call xfer_mem().
823 (xfer_mem): New function. Does appropriate memory mapping and copies bytes.
824 (dmem_addr): New function. Reads dmap register and translates data
825 addresses to local addresses.
826 (pc_addr): New function. Reads imap register and computes local address
827 corresponding to contents of the PC.
828 (sim_resume): Change to use pc_addr().
829 (sim_create_inferior): Change reinitialization code. Also reinitializes
831 (sim_fetch_register): Add fake registers 32,33,34 for imap0, imap1, and dmap.
832 (sim_store_register): Add fake registers 32,33,34 for imap0, imap1, and dmap.
834 * simops.c (MEMPTR): Redefine to use dmem_addr().
835 (OP_5F00): Replace references to STate.imem with dmem_addr().
837 * d10v-sim.h (State): Remove mem_min and mem_max. Add umem[128].
838 (RB,SW,RW,SLW,RLW): Redefine to use dmem_addr().
839 (IMAP0,IMAP1,DMAP,SET_IMAP,SET_IMAP1,SET_DMAP): Define.
841 Tue Oct 22 15:22:33 1996 Michael Meissner <meissner@tiktok.cygnus.com>
843 * d10v_sim.h (_ins_type): Reorganize, so that we can provide
844 better statistics, like not counting NOPS as parallel
845 instructions, and printing total cycles.
846 (ins_type_counters): Make unsigned long.
847 (left_nops,right_nops): Fold into ins_type_counters.
849 * simops.c (trace_input_func): Print new instruction types.
850 Handle OP_R2R3 as input types.
851 (OP_{38000000,7000}): Correctly sign extend bytes.
852 (OP_5E00): Don't count NOPs as parallel instructions.
853 (OP_460B): Remove unused variable.
856 * interp.c (ins_type_counters): Make unsigned long.
857 (left_nops,right_nops): Delete.
858 (most functions): Add prototypes.
859 (INLINE): If GCC and optimize define as __inline__.
860 ({,lookup_}hash,get_operands): Declare as INLINE.
861 (do_parallel): Count conditional operations.
862 (add_commas): New function, to add commas every 3 digits.
863 (sim_size): Call add_commas to print numbers.
864 (sim_{open,resume}): Delete unused variables.
865 (sim_info): Provide better statistics.
866 (sim_read): Add int return type.
868 Mon Oct 21 16:16:26 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
870 * interp.c (sim_resume): Change the way single-stepping and exceptions
871 are handled so single-stepping works again.
873 Thu Oct 17 12:24:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
875 * endian.c: Optimize simulated loads/stores on x86, AIX, and big
878 * configure.in (--enable-sim-bswap): New switch to enable using
879 the BSWAP instruction on x86's.
880 * configure: Regenerate.
882 * Makefile.in ({SWAP,CONFIG}_CFLAGS): Add --enable-sim-bswap
885 Wed Oct 16 13:50:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
887 * endian.c: New file. Move endian functions here from interp.c.
888 Optimize code, and make it work as either inline functions or as a
891 * interp.c: Move endian functions from here to endian.c.
893 * Makefile.in (INCLUDE): Add endian.c.
894 (run,libsim.a): Add dependency on endian.o.
895 (endian.o): Add dependency.
897 * d10v_sim.h (read/write support): Always go through the machine
898 independent endian functions. If compiling with GCC and
899 optimizing, include endian.c so the endian functions are inlined.
901 * simops.c (OP_5F00): Correct tracing of accumulators.
903 Tue Oct 15 10:57:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
905 * simops.c (OP_5F00): Add support for getpid, kill system calls.
907 * interp.c (do_{2_short,parallel}): If an exception is raised,
908 don't execute the second instruction.
910 Sat Oct 12 22:17:43 1996 Michael Meissner <meissner@tiktok.cygnus.com>
912 * simops.c (OP_{31000000,6601,6201,6200}): Store address in a
913 temporary in case the register is overriden when loading.
914 (OP_6200): Output type is OP_DREG for tracing.
916 Fri Oct 4 23:46:18 1996 Michael Meissner <meissner@tiktok.cygnus.com>
918 * d10v_sim.h (struct _state): Add mem_{min,max} fields.
920 * interp.c (sim_size): Initialize mem_{min,max} fields.
921 (sim_write): Update mem_{min,max} fields.
922 (sim_resume): If PC is not in the minimum/maximum memory range,
924 (sim_create_inferior): Preserve mem_{min,max} fields.
926 Fri Sep 27 13:11:58 1996 Mark Alexander <marka@cygnus.com>
928 * simops.c (OP_5F00): Add support for time() system call.
930 Wed Sep 25 16:31:41 1996 Michael Meissner <meissner@tiktok.cygnus.com>
932 * simops.c (OP_{6E01,6A01,6E1F,6A00}): Print both words being
934 (OP_5F00,trace_{in,out}put_func): Add finer grain tracing for
937 Mon Sep 23 17:55:30 1996 Michael Meissner <meissner@tiktok.cygnus.com>
939 * simops.c (op_types): Add OP_{CONSTANT8,R2,R3}.
940 (trace_input_func): Add support for OP_{CONSTANT8,R2,R3}.
941 (OP_{4900,24800000,4800,4A00,4B00,4D00,4C00}): Add OP_R2 and OP_R3
942 to call/subroutine returns to trace the first two arguments and
943 the return value. For small jumps, use CONSTANT8, not CONSTANT16.
945 Fri Sep 20 15:36:45 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
947 * interp.c (sim_create_inferior): Reinitialize State every time
948 sim_create_inferior() is called.
950 Thu Sep 19 21:38:20 1996 Michael Meissner <meissner@wogglebug.ziplink.net>
952 * simops.c (OP_{401,2000000,601,3000000,23000000}): Get sign right
954 (OP_401): Fix tracing information.
956 Thu Sep 19 10:30:22 1996 Michael Meissner <meissner@tiktok.cygnus.com>
958 * simops.c (SIZE_{PC,LINE_NUMBER}): New default sizes for output.
959 (trace_input_func): Use them.
960 (trace_input_func): Make sure there is a trailing space after the
962 (OP_6200): Fix tracing info.
964 * Makefile.in (run): Add dependencies on libbfd.a and
967 Wed Sep 18 09:13:25 1996 Michael Meissner <meissner@tiktok.cygnus.com>
969 * d10v_sim.h (DEBUG_INSTRUCTION): New debug value to include line
970 numbers and function names in debug trace.
971 (DEBUG): If not defined, set to DEBUG_TRACE, DEBUG_VALUES, and
973 (SIG_D10V_{STOP,EXIT}): Values to represent the stop instruction
974 and exit system call trap being executed.
976 * interp.c (sim_stop_reason): Set exit code correctly for stop
977 instruction and exit system call trap.
979 * configure.in (--enable-sim-cflags): Remove trace case.
980 (--enable-sim-debug): New switch to set the debug values.
981 * configure: Regenerate.
983 * simops.c (trace_{input,output}_func): Rename from
984 trace_{input,output}.
985 (trace_{input,output}): Call trace_{input,output}_func if
986 d10v_debug is non-zero.
987 (SIZE_INSTRUCTION): Cut down to 8.
988 (SIZE_OPERANDS): Cut down to 18.
989 (SIZE_LOCATION): New value for size of line number, function name
991 (init_text_p,text{,_start,_end}): New static variables for
992 printing line number and function name.
993 (exec_bfd): New external that run.c sets.
994 (trace_input_func): Print line number and function name if
995 available and if desired.
996 (OP_4E09): Don't print out DBT message.
997 (OP_5FE0): Set exception field to SIG_D10V_STOP.
998 (OP_5F00): Set exception field to SIG_D10V_EXIT.
1000 Sat Sep 14 22:18:43 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1002 * interp.c (do_2_short): If the instruction encodes jump->ins,
1003 don't do the second instruction if the jump succeeds.
1005 Fri Sep 13 22:35:19 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1007 * simops.c (OP_5F00): Use unknown traps to print all GPRs,
1008 accumulators, PC, and F0/F1/C flags.
1010 Thu Sep 12 12:50:11 1996 Mark Alexander <marka@cygnus.com>
1012 * simops.c (OP_5F00): Fix problems with system calls.
1014 Thu Sep 12 12:19:28 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1016 * simops.c (OP_5F00): Correct tracing information for trap.
1018 Wed Sep 11 18:55:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1020 * Makefile.in (CSEARCH): Correctly find opcodes directory.
1022 Mon Sep 9 13:27:26 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1024 * simops.c (trace_output): Properly align accumulator output.
1025 (OP_3{0,2,4}00): Properly parenthesize test expression. Add error
1026 if shift count is too high.
1027 (OP_4E{00,02,04,20,22,40,42}): Make tests agree with book.
1028 (OP_4E09): Make cpfg properly trace the input flags.
1029 (op_types): Add OP_FLAG_OUTPUT.
1030 (trace_{input,output}): Support OP_FLAG_OUTPUT.
1031 (OP_31000000): This ld2w varient is a 16-bit memory reference, not
1032 an 8-bit memory reference instruction for tracing purposes.
1033 (OP_201): Addi needs to set the carry.
1035 Fri Sep 6 17:56:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1037 * simops.c (OP_2600, OP_2601): Changed min and max comparisons
1038 to use signed register values.
1040 Wed Sep 4 11:35:17 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1042 * d10v_sim.h (DEBUG_*): Add bit flags for controlling debug
1044 (_ins_type): New enumeration to specify which container an
1045 instruction is in, and whether it is part of a parallel operation.
1046 (_state): Add ins_type field.
1047 ({,u}int{8,16,32,64}): Use limits.h to size the appropriate types.
1048 (ins_type_counters): Counters for the various instruction types.
1049 ({left,right}_nops): Counters for the number of nops in each
1051 (d10v_debug): New variable to indicate whether debugging is turned
1054 * simops.c: (all functions): Change all #ifdef DEBUG code so that
1055 the input and output values can be traced, along with the
1056 instruction type. Make the -t option enable tracing.
1057 (all functions): Change printf calls to use the printf_filtered
1058 function in the callback table.
1060 * interp.c (_leftright): New enumeration to say whether 2 short
1061 instructions are done left first or right first.
1062 (do_{long,2_short,parallel}): Indicate in the machine state which
1063 type of instruction this is. Count each of the types of
1064 instructions executed.
1065 (sim_size): Only print the memory sizes if DEBUG_MEMSIZE debug
1067 (sim_resume): Pass left/right indication to do_2_short.
1068 (all functions): Change printf calls to use the printf_filtered
1069 function in the callback table.
1070 (sim_trace): Turn on debug flag if DEBUG was defined, and call
1072 (sim_info): Print out statistics on instructions.
1073 (sim_{trace,create_inferior}): Eliminate extraneous output unless
1075 (sim_open): If args == -t and DEBUG was defined, set d10v_debug.
1076 Only initialize the hash table the first time sim_open is called.
1078 * Makefile.in: Make objects depend on d10v_sim.h.
1079 ({,SIM_}CFLAGS): Include configure dependent switches. Setting
1080 CFLAGS does not override host/target defines or SIM_CFLAGS.
1081 (CC_FOR_BUILD,gencode): Use CC_FOR_BUILD to compile gencode.
1082 (run): By default, the math library is not needed to be linked
1084 ({BFD,LIBIBERTY}_LIB): Define as variables so they can be
1086 (VPATH): Don't set to anything but @srcdir@ to work with non-GNU
1088 ({run,callback}.o): Provide explicit paths to their appropriate
1090 (gencode{,.o},d10v-opc.o): Split compilation into creating object
1091 and linking. Instead of linking in libopcodes.a, just compile
1092 d10v-opc.o directly to handle canadian cross.
1093 (CSEARCH): Add opcodes directory.
1095 * configure.in (--enable-sim-cflags): New switch to allow user to
1097 (CC_FOR_BUILD): Deal with canadian crosses.
1098 * configure: Regenerate.
1100 Wed Sep 04 04:45:34 1996 Mark Alexander <marka@cygnus.com>
1102 * simops.c: Include correct syscall.h for d10v, not host's.
1103 Fix #ifdef SYS_stat.
1105 Tue Sep 3 14:00:04 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1107 * simops.c (OP_5F00): Wrap all SYS_xxx traps with #ifdef.
1108 Add trap 2 to be printf and trap 3 to be putchar.
1110 Wed Aug 28 21:42:34 1996 Mark Alexander <marka@cygnus.com>
1112 * Makefile.in, d10v_sim.h, interp.c, simops.c: Add support
1113 for low-level system calls.
1115 Wed Aug 28 17:33:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1117 * Makefile.in, d10v_sim.h, interp.c: Fix byte-order problems.
1119 Mon Aug 26 18:30:28 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1121 * d10v_sim.h (SEXT32): Added.
1122 * interp.c: Commented out printfs.
1123 * simops.c: Fixed error in sb and st2w.
1125 Thu Aug 15 13:30:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1127 * Makefile.in, d10v_sim.h, interp.c, simops.c: Added remaining
1128 DSP instructions. Added modulo addressing.
1130 Sun Aug 11 12:57:15 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1132 * Makefile.in, d10v_sim.h, interp.c, simops.c: Snapshot.
1134 Fri Aug 2 17:44:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1136 * d10v_sim.h, simops.c: Snapshot.
1138 Thu Aug 1 17:05:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1140 * ChangeLog, Makefile.in, configure, configure.in, d10v_sim.h,
1141 gencode.c, interp.c, simops.c: Created.