1 2016-01-10 Mike Frysinger <vapier@gentoo.org>
3 * configure: Regenerate.
5 2016-01-10 Mike Frysinger <vapier@gentoo.org>
7 * configure: Regenerate.
9 2016-01-10 Mike Frysinger <vapier@gentoo.org>
11 * configure: Regenerate.
13 2016-01-10 Mike Frysinger <vapier@gentoo.org>
15 * configure: Regenerate.
17 2016-01-10 Mike Frysinger <vapier@gentoo.org>
19 * configure: Regenerate.
21 2016-01-10 Mike Frysinger <vapier@gentoo.org>
23 * configure: Regenerate.
25 2016-01-10 Mike Frysinger <vapier@gentoo.org>
27 * configure: Regenerate.
29 2016-01-09 Mike Frysinger <vapier@gentoo.org>
31 * config.in, configure: Regenerate.
33 2016-01-06 Mike Frysinger <vapier@gentoo.org>
35 * interf.c (sim_open): Mark argv const.
36 (sim_create_inferior): Mark argv and env const.
38 2016-01-04 Mike Frysinger <vapier@gentoo.org>
40 * configure: Regenerate.
42 2016-01-03 Mike Frysinger <vapier@gentoo.org>
44 * interf.c (sim_open): Replace while loop with a call to countargv.
46 2016-01-03 Mike Frysinger <vapier@gentoo.org>
48 * configure.ac (SIM_AC_OPTION_HOSTENDIAN): Delete.
49 * configure: Regenerate.
50 * exec.c (fpexec): Rename CURRENT_HOST_BYTE_ORDER to
52 * sis.h (WITH_HOST_BYTE_ORDER): Rename to ...
53 (HOST_BYTE_ORDER): ... this.
55 2016-01-02 Mike Frysinger <vapier@gentoo.org>
57 * configure: Regenerate.
59 2015-12-26 Mike Frysinger <vapier@gentoo.org>
61 * config.in, configure: Regenerate.
63 2015-06-23 Mike Frysinger <vapier@gentoo.org>
65 * configure: Regenerate.
67 2015-06-12 Mike Frysinger <vapier@gentoo.org>
69 * configure: Regenerate.
71 2015-06-12 Mike Frysinger <vapier@gentoo.org>
73 * configure: Regenerate.
75 2015-05-17 Mike Frysinger <vapier@gentoo.org>
77 * erc32.c: Re-add file overview & author info.
78 * exec.c, float.c, func.c, help.c, interf.c, sis.c: Likewise.
80 2015-05-08 Joel Brobecker <brobecker@adacore.com>
82 * configure.ac: Add copyright header.
83 * erc32.c: Change copyright holder to FSF. Reformat.
84 * exec.c, float.c, func.c, interf.c, sis.c, sis.h: Likewise.
85 * help.c, startsim: Add copyright header.
87 2015-04-29 Nick Clifton <nickc@redhat.com>
90 * sis.c (main): Remove unreachable code.
92 2015-04-24 David Binderman <dcb314@hotmail.com>
93 Nick Clifton <nickc@redhat.com>
96 * exec.c (add32): Fix typo in check for overflow.
98 2015-04-19 Jiri Gaisler <jiri@gaisler.se>
100 * erc32.c (current_target_byte_order): Delete.
101 (fetch_bytes): Remove.
102 (store_bytes): Remove byte twisting.
103 (memory_read, memory_write): Access memory directly.
104 (extract_short, extract_short_signed, extract_byte,
105 extract_byte_signed): New function for for sub-word LD instructions.
106 * exec.c (extract_short, extract_short_signed, extract_byte,
107 extract_byte_signed): New functions.
108 (dispatch_instruction): Update memory reads.
109 * func.c (current_target_byte_order): Delete.
110 (get_regi): Delete little endian handling.
111 (disp_ctrl, dis_mem): Adjust print-out to new data endian.
112 (bfd_load): Delete little endian handling.
113 * interf.c (current_target_byte_order): Delete.
114 (sim_open): Set dinfo to host endian to get correct disassembly.
115 (sim_write, sim_read): Convert endian when gdb reads or writes
117 * sis.c (main): Set endian.
118 * sis.h (EBT): Define.
120 2015-04-13 Mike Frysinger <vapier@gentoo.org>
122 * configure: Regenerate.
124 2015-03-31 Mike Frysinger <vapier@gentoo.org>
126 * config.in, configure: Regenerate.
128 2015-03-28 Jiri Gaisler <jiri@gaisler.se>
130 * func.c (exec_cmd): Fix old style prototype. Mark cmd const. Save
131 the command in a new cmdsave2 to avoid modifying.
132 (bfd_load): Fix old style prototype. Mark fname const.
133 * sis.h (exec_cmd): Mark cmd const.
134 (bfd_load): Mark fname const.
136 2015-03-28 Jiri Gaisler <jiri@gaisler.se>
138 * erc32.c (memory_iread): New function to fetch instructions.
139 (memory_read): Print message in verbose mode.
140 * interf.c (run_sim): Use memory_iread.
141 * sis.c (run_sim): As above.
142 * sis.h (memory_iread): New prototype.
145 2015-03-28 Mike Frysinger <vapier@gentoo.org>
147 * erc32.c (mec_read): Delete parenthesis around return statement.
148 (mec_write, read_uart, rtc_counter_read, gpt_counter_read, memory_read,
149 memory_write, get_mem_ptr, sis_memory_write, sis_memory_read): Likewise.
150 * exec.c (sub_cc, add_cc, add32, dispatch_instruction, fpexec, chk_asi,
151 execute_trap, check_interrupts): Likewise.
152 * float.c (get_accex): Likewise.
153 * func.c (batch, limcalc, exec_cmd, disp_fpu, now, wait_for_irq,
154 check_bpt, bfd_load, get_time): Likewise.
155 * interf.c (run_sim, sim_write, sim_read): Likewise.
156 * sis.c (run_sim): Likewise.
158 2015-03-24 Mike Frysinger <vapier@gentoo.org>
160 * interf.c (sim_set_callbacks, sim_size, sim_trace): Delete.
162 2015-03-17 Jiri Gaisler <jiri@gaisler.se>
164 * func.c (exec_cmd): Silence compiler warnings when calling system().
165 (batch): Replace fgets() with getline().
167 2015-03-17 Jiri Gaisler <jiri@gaisler.se>
169 * func.c (show_stat): Print simulation time in portable long long
171 * help.c (usage): Update usage help print-out.
172 * sis.c (run_sim): Increase debug level with -v. Also print
173 simulation time in portable long long format.
174 * sis.h: Use stdint.h for portable 32- and 64-bit ints.
176 2015-03-16 Mike Frysinger <vapier@gentoo.org>
178 * config.in, configure: Regenerate.
180 2015-03-16 Jiri Gaisler <jiri@gaisler.se>
182 * Makefile.in (end, end.h): Remove target rules.
183 (clean): Remove end and end.h.
184 (erc32.o, exec.o, float.o, func.o, help.o, interf.o, sis.o): Delete
186 * configure, config.in: Regenerate.
187 * configure.ac: Use SIM_AC_OPTION_HOSTENDIAN
189 * erc32.c: Remove end.h include.
190 * exec.c: Remove end.h include. Use HOST_LITTLE_ENDIAN.
191 * func.c, sis.c: Likewise.
193 2015-03-14 Mike Frysinger <vapier@gentoo.org>
195 * Makefile.in (SIM_RUN_OBJS): Set to sis.o.
197 2015-03-14 Mike Frysinger <vapier@gentoo.org>
199 * configure.ac (AC_CHECK_HEADERS): Delete.
200 * aclocal.m4, configure: Regenerate.
202 2015-02-22 Jiri Gaisler <jiri@gaisler.se>
204 * Makefile.in: Add include path to readline.h.
205 sis.c: Remove locally define readline types.
207 2015-02-21 Jiri Gaisler <jiri@gaisler.se>
209 * func.c (reset_stat, show_stat): Switch to double in time keeping.
210 (get_time): New function to get system time.
211 * interf.c (run_sim): Use get_time() for system time.
212 * sis.c (run_sim): Likewise.
215 2015-02-21 Jiri Gaisler <jiri@gaisler.se>
217 * Makefile.in: Remove unused defines
219 2015-02-21 Jiri Gaisler <jiri@gaisler.se>
221 * float.c (get_accex, clear_accex, set_fsr): Use functions from fenv.h
222 instead of custom assembly.
224 2015-02-21 Jiri Gaisler <jiri@gaisler.se>
226 * erc32.c (mec_read): Allow simulator memory size to be read
228 (boot_init): initialize memory and timers if start address is
230 * func.c (exe_cmd): Call boot_init if start address not 0.
231 * interf.c (run_sim): Likewise.
233 2015-02-21 Jiri Gaisler <jiri@gaisler.se>
235 * exec.c (init_regs): erc32 has vendor ID 1 and version ID 1 in %psr.
237 2015-02-21 Jiri Gaisler <jiri@gaisler.se>
239 * func.c (print_insn_sparc_sis): Add helper function for disassembly.
240 (disp_ctrl): Use helper function.
242 2014-08-19 Alan Modra <amodra@gmail.com>
244 * configure: Regenerate.
246 2014-08-15 Roland McGrath <mcgrathr@google.com>
248 * configure: Regenerate.
249 * config.in: Regenerate.
251 2014-03-10 Mike Frysinger <vapier@gentoo.org>
253 * interf.c (sim_do_command): Add const to cmd.
255 2014-03-05 Mike Frysinger <vapier@gentoo.org>
257 * interf.c (sim_load): Add const to prog.
259 2013-10-09 Sergio Durigan Junior <sergiodj@redhat.com>
262 * float.c (set_fsr): Add missing "break" statements. Reindent
265 2013-09-23 Alan Modra <amodra@gmail.com>
267 * configure: Regenerate.
269 2013-06-03 Mike Frysinger <vapier@gentoo.org>
271 * aclocal.m4, configure: Regenerate.
273 2013-03-14 Joel Sherrill <joel.sherrill@oarcorp.com>
275 * Makefile.in: Include build directory in search path to find
278 2012-08-16 Nick Clifton <nickc@redhat.com>
280 * end.c: Include config.h before system header files.
286 * interf.c: Likewise.
288 2012-06-15 Joel Brobecker <brobecker@adacore.com>
290 * sys.h: Include "config.h".
292 2012-06-15 Joel Brobecker <brobecker@adacore.com>
294 * config.in, configure: Regenerate.
296 2012-05-24 Pedro Alves <palves@redhat.com>
300 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
302 2012-03-24 Mike Frysinger <vapier@gentoo.org>
304 * aclocal.m4, config.in, configure: Regenerate.
306 2011-12-31 Mike Frysinger <vapier@gentoo.org>
309 * configure.ac: Change AC_CHECK_LIB to AC_SEARCH_LIBS to match
310 the code in gdb's configure.ac with $TERMCAP.
311 * configure: Regenerated.
313 2011-12-03 Mike Frysinger <vapier@gentoo.org>
315 * aclocal.m4: New file.
316 * configure: Regenerate.
318 2011-10-17 Mike Frysinger <vapier@gentoo.org>
320 * configure.ac: Change include to common/acinclude.m4.
322 2011-10-17 Mike Frysinger <vapier@gentoo.org>
324 * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER
325 call. Replace common.m4 include with SIM_AC_COMMON.
326 * configure: Regenerate.
328 2011-06-09 Mike Frysinger <vapier@gentoo.org>
330 * interf.c (sim_open): Accept and ignore `--sysroot=...'.
332 2011-06-01 Joel Brobecker <brobecker@adacore.com>
334 * interf.c (sim_complete_command): New stub function.
336 2011-01-11 Andrew Burgess <aburgess@broadcom.com>
338 * interf.c (sim_store_register): Update return value to
341 2010-05-20 Joel Brobecker <brobecker@adacore.com>
343 * sis.h: Remove #include <stdint.h>.
344 (uint64, int64): Redefine without using stdint.h.
345 (UINT64_MAX): Define.
347 2010-04-20 Tiemen Schut <T.Schut@sron.nl>
349 * erc32.c (sis_memory_write): Change prototype to const unsigned char *.
350 * func.c (exec_cmd, event, advance_time, wait_for_irq): Use uint64
352 * interf.c (run_sim): Change icount to uint64_t. Use strtol directly.
353 (sim_resume): Specify maximum run time as uint64.
354 * sis.c (run_sim): Change icount to uint64_t.
355 * sis.h: Define uint64 as uint64_t. Change various fields and
356 prototypes to uint64 to support longer simulations.
358 2010-04-14 Mike Frysinger <vapier@gentoo.org>
360 * interp.c (sim_write): Add const to buf arg.
362 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
364 * configure: Regenerate.
366 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
368 * config.in: Regenerate.
369 * configure: Likewise.
371 * configure: Regenerate.
373 2008-11-10 Joel Sherrill <joel.sherrill@oarcorp.com>
375 * erc32.c, exec.c: Fix warnings.
377 2008-07-11 Hans-Peter Nilsson <hp@axis.com>
379 * configure: Regenerate to track ../common/common.m4 changes.
382 2008-06-09 Joel Sherrill <joel.sherrill@oarcorp.com>
384 * sis.c: Correct spelling error.
386 2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
387 Daniel Jacobowitz <dan@codesourcery.com>
388 Joseph Myers <joseph@codesourcery.com>
390 * configure: Regenerate.
392 2006-12-21 Hans-Peter Nilsson <hp@axis.com>
394 * acconfig.h: Remove.
395 * config.in: Regenerate.
397 2006-12-20 Hans-Peter Nilsson <hp@axis.com>
399 * configure.ac: Add test for readline, substitute READLINE.
400 * Makefile.in (READLINE_LIB): New substituted-contents variable.
401 (SIM_EXTRA_LIBDEPS): Don't set.
402 (SIM_EXTRA_LIBS): Use $(READLINE_LIB) instead of
403 ../../readline/libreadline.a.
404 * configure: Regenerate.
406 2006-08-08 Daniel Jacobowitz <dan@codesourcery.com>
408 * Makefile.in (func.o, help.o): Correct dependencies.
410 2006-08-08 Joel Sherrill <joel.sherrill@oarcorp.com>
412 * Makefile.in (install-sis): Honor DESTDIR.
414 2006-06-13 Richard Earnshaw <rearnsha@arm.com>
416 * configure: Regenerated.
418 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
420 * configure: Regenerated.
422 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
424 * configure: Regenerated.
426 2005-11-28 Mark Mitchell <mark@codesourcery.com>
428 * interf.c: (gdb/signals.h): Include it.
429 (sim_stop_reason): Use TARGET_SIGNAL_*.
431 2005-07-08 Ben Elliston <bje@au.ibm.com>
433 * func.c: Remove ANSI_PROTOTYPES conditional code.
435 2005-03-23 Mark Kettenis <kettenis@gnu.org>
437 * configure: Regenerate.
439 2005-03-07 Jerome Guitton <guitton@gnat.com>
441 * sim/erc32/float.c (set_fsr): Do not use deprecated multi-line
443 (clear_accex): Ditto.
444 * sim/erc32/interf.c: Remove the redeclaration of fprintf.
445 * sim/erc32/sis.c: Ditto.
446 * sim/erc32/exec.c: Add missing semicolon.
447 * sim/erc32/func.c: Remove definitions of generic_print_address,
448 generic_symbol_at_address, buffer_read_memory and perror_memory, as
449 they are already defined in opcodes/dis-buf.c.
451 2005-01-14 Andrew Cagney <cagney@gnu.org>
453 * configure.ac: Sinclude aclocal.m4 before common.m4. Add
454 explicit call to AC_CONFIG_HEADER.
455 * configure: Regenerate.
457 2005-01-12 Andrew Cagney <cagney@gnu.org>
459 * configure.ac: Update to use ../common/common.m4.
460 * configure: Re-generate.
462 2005-01-11 Andrew Cagney <cagney@localhost.localdomain>
464 * configure: Regenerated to track ../common/aclocal.m4 changes.
466 2005-01-07 Andrew Cagney <cagney@gnu.org>
468 * configure.ac: Rename configure.in, require autoconf 2.59.
469 * configure: Re-generate.
471 2004-12-08 Hans-Peter Nilsson <hp@axis.com>
473 * configure: Regenerate for ../common/aclocal.m4 update.
475 2004-11-11 Andreas Schwab <schwab@suse.de>
477 * interf.c: Include "libiberty.h" instead of declaring buildargv
480 2003-02-27 Andrew Cagney <cagney@redhat.com>
482 * interf.c (sim_open, sim_create_inferior): Rename _bfd to bfd.
484 2002-06-16 Andrew Cagney <ac131313@redhat.com>
486 * configure: Regenerated to track ../common/aclocal.m4 changes.
488 2002-06-08 Andrew Cagney <cagney@redhat.com>
490 * sis.h: Include "gdb/remote-sim.h" and "gdb/callback.h".
491 * interf.c: Include "gdb/remote-sim.h".
493 Tue May 23 21:39:23 2000 Andrew Cagney <cagney@b1.cygnus.com>
495 * configure: Regenerated to track ../common/aclocal.m4 changes.
497 2000-03-07 Frank Ch. Eigler <fche@redhat.com>
499 From John Dallaway <jld@redhat.co.uk>:
500 * Makefile.in (install-sis): Add $(EXEEXT) for Windows host.
502 2000-03-03 Jonathan Larmour <jlarmour@redhat.co.uk>
504 * func.c (buffer_read_memory): Change type of size to unsigned to
507 Thu Sep 2 18:15:53 1999 Andrew Cagney <cagney@b1.cygnus.com>
509 * configure: Regenerated to track ../common/aclocal.m4 changes.
511 1999-05-08 Felix Lee <flee@cygnus.com>
513 * configure: Regenerated to track ../common/aclocal.m4 changes.
515 1999-03-03 DJ Delorie <dj@cygnus.com>
517 * configure.in: add termcap and -luser32 for host=cygwin
518 * configure: regenerate
520 1999-02-11 Hugo Tyson <hmt@cygnus.co.uk>
522 * exec.c (dispatch_instruction):
523 Correct the sense of the
525 sregs->trap = TRAP_UNIMP;
528 clause that has been pasted around: it's correct in the SCAN and
529 DIVScc (divide step) cases (where it was probably originally
530 written?), but reversed in the SDIV, SDIVcc, UDIV, UDIVcc cases
531 ie. instructions only in the SPARC V8 or SPARClite 86x
532 architectures. It was also present when not required for SMUL,
533 SMULcc, UMUL, UMULcc instructions that are present in all
536 1999-01-25 Hugo Tyson <hmt@cygnus.co.uk>
538 * interf.c (run_sim): Fix a bug in the main loop's handling of
539 annulled delay slot instructions. There is precedent for this
540 change; the _other_ main loop in sis.c gets it right according to
541 my reading of the code.
543 The bug is: if an interrupt happens when the next instruction
544 (at sregs->pc) is annulled, the trap is taken (by execute_trap())
545 with the current values of PC and NPC, so when the trap returns,
546 the annulled instruction is indeed executed. Another giveaway is
547 that the annul flag is cleared in execute_trap(): the information
548 is demonstrably discarded.
550 The solution is: perform annulling before looking for traps, in
551 fact it's neater to do annulling, see if there's an interrupt and
552 if not, do the instruction, then handle traps be they generated by
553 interrupts pending or by the instruction we might just have done.
554 That's what the sis.c one does.
556 1999-01-20 Hugo Tyson <hmt@cygnus.co.uk>
558 * sis.h: Add asr17 register for support of SparcLITE (at least the
559 Hitachi ones I find before me)
561 * exec.c (dispatch_instruction): Case WRY: Allow write of asr17 if
562 sparclite. Other ASR numbers than 17 or 0 (Y) trap out.
563 Case RDY: Allow read of asr17 if sparclite. Other ASRs ditto.
564 (execute_trap): Do single-vector-trapping if asr17 bit 0 is set.
565 (init_regs): Initialize y and asr17.
566 NB: In instruction-set space, the Y register is asr0; the
567 instructions have different names for human reasons only.
570 * interf.c: Set boolean mode variable dumbio if invoked with
571 argument "-dumbio" and mention it of verbose.
572 * erc32.c: if "dumbio" is set, do not assume that there is a
573 terminal type device attached to stdin/stdout. Do not set
574 buffering or mess with tcsetattr or do any read operations in
575 order to make UART interrupts; not input data is supported.
576 This is necessary to allow the sim to be used within the eCos
577 testing infrastructure where stdin/stdout are pipes to a TCL
578 program; the sim hangs otherwise.
580 Thu Jul 23 07:17:03 1998 Mark Alexander <marka@cygnus.com>
582 * exec.c (dispatch_instruction): Add SPARClite 'scan' instruction.
584 Tue Jul 7 21:12:41 1998 Mark Alexander <marka@cygnus.com>
586 * func.c (bfd_load): Add special handling of a.out executables.
588 Sat Jun 13 08:33:25 1998 Mark Alexander <marka@cygnus.com>
590 * func.c (bfd_load): Print correct endianness.
591 * interf.c (run_sim): Print debugging information if verbosity level
593 (sim_open): Repeated -v options now increment verbosity level.
594 (sim_store_register): Handle little-endian case.
595 (flush_window): Print debugging information if verbosity level
598 Tue Jun 2 15:20:35 1998 Mark Alexander <marka@cygnus.com>
600 * interf.c (sim_open): Use revamped memory_read, which makes
601 byte-swapping unnecessary. Add -sparclite-board option for
602 emulating RAM found on typical SPARClite boards. Print
603 error message for unrecognized option.
604 * erc32.c: Change RAM address and size from constants to variables,
605 to allow emulation of SPARClite board RAM.
606 (fetch_bytes, store_bytes): New helper functions for revamped
607 mememory_read and memory_write.
608 (memory_read, memory_write): Rewrite to store bytes in target
609 byte order instead of storing words in host byte order; this
610 greatly simplifies support of little-endian programs.
611 (get_mem_ptr): Remove unnecessary byte parameter.
612 (sis_memory_write, sis_memory_read): Store words in target
613 byte order instead of host byte order.
614 (byte_swap_words): Remove, no longer needed.
615 * sis.h ((byte_swap_words): Remove declaration, no longer needed.
616 (memory_read): Add new sz parameter.
617 * sis.c (run_sim): Use revamped memory_read, which makes
618 byte-swapping unnecessary.
619 * exec.c (dispatch_instruction): Use revamped memory_read, which
620 makes byte-swapping and double-word fetching unnecessary.
621 * func.c (sparclite_board): Declare new variable.
622 (get_regi): Handle little-endian data.
623 (bfd_load): Recognize little-endian SPARClite as having
626 Fri May 22 14:23:16 1998 Mark Alexander <marka@cygnus.com>
628 * erc32.c (port_init): Print messages only if sis_verbose is true.
629 * func.c (bfd_load): Ditto.
630 * interf.c (sim_open): Ditto.
632 Thu May 14 23:10:48 1998 Mark Alexander <marka@cygnus.com>
634 * sis.h (uint64, int64): Define.
635 * exec.c (SDIV, SDIVCC, UDIV, UDIVCC): Define new opcodes.
636 * (mul64): Simplify calculation of negative result.
637 * (div64): New helper function for 64-bit division.
638 * (dispatch_instruction): Add emulation of SDIV, SDIVCC, UDIV,
641 Wed May 13 14:59:54 1998 Mark Alexander <marka@cygnus.com>
643 * erc32.c (close_port): Don't close stdin; it kills GDB.
644 (byte_swap_words): New function.
645 * sis.h: (byte_swap_words): Declare.
646 * interf.c (run_sim): Always fetch instructions as big-endian.
647 * sis.c (run_sim): Ditto.
649 Tue Apr 28 18:33:31 1998 Geoffrey Noer <noer@cygnus.com>
651 * configure: Regenerated to track ../common/aclocal.m4 changes.
653 Sun Apr 26 15:31:55 1998 Tom Tromey <tromey@creche>
655 * configure: Regenerated to track ../common/aclocal.m4 changes.
658 Sun Apr 26 15:20:17 1998 Tom Tromey <tromey@cygnus.com>
660 * acconfig.h: New file.
661 * configure.in: Reverted change of Apr 24; use sinclude again.
663 Fri Apr 24 14:16:40 1998 Tom Tromey <tromey@creche>
665 * configure: Regenerated to track ../common/aclocal.m4 changes.
668 Fri Apr 24 11:19:52 1998 Tom Tromey <tromey@cygnus.com>
670 * configure.in: Don't call sinclude.
672 Sat Apr 18 12:00:16 1998 Mark Alexander <marka@cygnus.com>
674 * func.c (disp_fpu): Fix build problem on big-endian hosts.
676 Wed Apr 8 19:33:34 1998 Mark Alexander <marka@cygnus.com>
678 * erc32.c (sim_stop): Handle SIGINT gracefully.
679 * interf.c (sim_open): Don't catch SIGINT; GDB will do that for us.
681 Wed Apr 8 18:29:40 1998 Mark Alexander <marka@cygnus.com>
683 * exec.c (dispatch_instruction): Change how carry out is calculated
684 in DIVSCC. Add emulation of SMULCC, UMUL, and UMULCC.
686 Sat Apr 4 20:36:25 1998 Andrew Cagney <cagney@b1.cygnus.com>
688 * configure: Regenerated to track ../common/aclocal.m4 changes.
690 Wed Apr 1 21:19:18 1998 Mark Alexander <marka@cygnus.com>
692 * end.c: Update to version 2.7.5, fix compiler warnings and bugs.
702 Fri Mar 27 16:15:52 1998 Andrew Cagney <cagney@b1.cygnus.com>
704 * configure: Regenerated to track ../common/aclocal.m4 changes.
706 Wed Mar 25 12:35:29 1998 Andrew Cagney <cagney@b1.cygnus.com>
708 * configure: Regenerated to track ../common/aclocal.m4 changes.
710 Wed Mar 18 12:38:12 1998 Andrew Cagney <cagney@b1.cygnus.com>
712 * configure: Regenerated to track ../common/aclocal.m4 changes.
714 Tue Feb 17 12:41:11 1998 Andrew Cagney <cagney@b1.cygnus.com>
716 * interf.c (sim_store_register, sim_fetch_register): Pass in
717 length parameter. Return -1.
719 Sun Feb 1 16:47:51 1998 Andrew Cagney <cagney@b1.cygnus.com>
721 * configure: Regenerated to track ../common/aclocal.m4 changes.
723 Sat Jan 31 18:15:41 1998 Andrew Cagney <cagney@b1.cygnus.com>
725 * configure: Regenerated to track ../common/aclocal.m4 changes.
727 Mon Jan 19 22:26:29 1998 Doug Evans <devans@seba>
729 * configure: Regenerated to track ../common/aclocal.m4 changes.
731 Mon Dec 15 23:17:11 1997 Andrew Cagney <cagney@b1.cygnus.com>
733 * configure: Regenerated to track ../common/aclocal.m4 changes.
736 Thu Dec 4 09:21:05 1997 Doug Evans <devans@canuck.cygnus.com>
738 * configure: Regenerated to track ../common/aclocal.m4 changes.
740 Fri Oct 3 09:28:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
742 * configure: Regenerated to track ../common/aclocal.m4 changes.
744 Wed Sep 24 17:38:57 1997 Andrew Cagney <cagney@b1.cygnus.com>
746 * configure: Regenerated to track ../common/aclocal.m4 changes.
748 Tue Sep 23 11:04:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
750 * configure: Regenerated to track ../common/aclocal.m4 changes.
752 Mon Sep 22 11:46:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
754 * configure: Regenerated to track ../common/aclocal.m4 changes.
756 Fri Sep 19 17:45:25 1997 Andrew Cagney <cagney@b1.cygnus.com>
758 * configure: Regenerated to track ../common/aclocal.m4 changes.
760 Mon Sep 15 17:36:15 1997 Andrew Cagney <cagney@b1.cygnus.com>
762 * configure: Regenerated to track ../common/aclocal.m4 changes.
764 Wed Aug 27 18:13:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
766 * configure: Regenerated to track ../common/aclocal.m4 changes.
769 Tue Aug 26 10:38:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
771 * float.c (__setfpucw): Compile on any i386 target. Not just NT.
773 * interf.c (sim_kill): Delete.
774 (sim_create_inferior): Add ABFD argument. Initialize PC from ABFD
776 (sim_load): Don't save start address.
777 (start_address): Delete variable.
779 Mon Aug 25 17:50:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
781 * configure: Regenerated to track ../common/aclocal.m4 changes.
784 Mon Aug 25 16:19:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
786 * interf.c (sim_open): Add ABFD argument. Change ARGV to PARGV.
788 Mon Jun 30 11:45:25 1997 Doug Evans <dje@canuck.cygnus.com>
790 * Makefile.in (install-sis): Change $(srcdir)/sis to sis.
792 Wed May 28 09:46:13 1997 Andrew Cagney <cagney@b1.cygnus.com>
794 * interf.c (sim_set_callbacks): Drop SD argument - not applicable.
795 (sim_open): Add callback arg, save it.
797 Thu Apr 24 00:39:51 1997 Doug Evans <dje@canuck.cygnus.com>
799 * configure: Regenerated to track ../common/aclocal.m4 changes.
801 Tue Apr 22 11:05:01 1997 Doug Evans <dje@canuck.cygnus.com>
803 * interf.c (sim_open): Undo patch to add -E support.
805 Thu Apr 17 03:03:56 1997 Doug Evans <dje@canuck.cygnus.com>
807 * interf.c (sim_open): Ignore -E arg.
808 (start_address): New static local.
809 (sim_load): Return SIM_RC. New arg abfd. Set start_address from bfd.
810 (sim_create_inferior): Return SIM_RC. Delete arg start_address.
812 Tue Apr 15 15:16:11 1997 Ian Lance Taylor <ian@cygnus.com>
814 * Makefile.in (install-sis): Depend upon installdirs. Use
815 $(program_transform_name) directly, rather than using
818 Mon Apr 7 15:45:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
820 * configure: Regenerated to track ../common/aclocal.m4 changes.
823 Wed Apr 2 15:06:28 1997 Doug Evans <dje@canuck.cygnus.com>
825 * interf.c (sim_open): New arg `kind'.
827 * configure: Regenerated to track ../common/aclocal.m4 changes.
829 Wed Apr 2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
831 * configure: Regenerated to track ../common/aclocal.m4 changes.
833 Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
835 * configure: Re-generate.
837 Thu Mar 13 12:46:04 1997 Doug Evans <dje@canuck.cygnus.com>
839 * interf.c (sim_open): New SIM_DESC result. Argument is now in
841 (other sim_*): New SIM_DESC argument.
843 Tue Feb 4 13:35:20 1997 Doug Evans <dje@canuck.cygnus.com>
845 * Makefile.in (@COMMON_MAKEFILE_FRAG): Use
846 COMMON_{PRE,POST}_CONFIG_FRAG instead.
847 * configure.in: sinclude ../common/aclocal.m4.
848 * configure: Regenerated.
850 Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com)
852 * configure configure.in Makefile.in: Update to new configure
853 scheme which is more compatible with WinGDB builds.
854 * configure.in: Improve comment on how to run autoconf.
855 * configure: Re-run autoconf to get new ../common/aclocal.m4.
856 * Makefile.in: Use autoconf substitution to install common
859 Wed Dec 4 18:25:04 1996 Rob Savoye <rob@chinadoll.cygnus.com>
861 * interf.c (run_sim): Stop the simulator and reset the stdio after
864 Tue Dec 3 11:54:37 1996 Rob Savoye <rob@chinadoll.cygnus.com>
866 * configure.in: Look for libtermcap.a.
867 * Makefile.in: Only link in -ltermcap if it exists.
868 * erc32.c: Update to version 2.6a. Fix uart handling.
869 * exec.c: Update to version 2.6a. Add sparclite support.
870 * float.c: Update to version 2.6a. Convert comments to
871 preprocessor warnings. Add __setfpucw() for i385 hosts so floating
872 point exceptions work on win32.
873 * func.c: Update to version 2.6a. Fix uart handling, add support
874 for user error traps.
875 * help.c: Update to version 2.6a. Add help note on user error
877 * interf.c: Update to version 2.6a. Fix uart handling, and add
879 * examples/gccx: Use sparclite cross compiler, not native gcc.
880 * examples/srt0.S: Use "mov" rather than "wr" for manipulating
883 Mon Nov 25 08:28:10 1996 Fred Fish <fnf@cygnus.com>
885 * Makefile.in (run.o): Remove this rule, it hides the one in
886 ../common/Make-common.in that correctly references the source
887 in the sibling ../common directory.
889 Wed Nov 20 01:30:12 1996 Doug Evans <dje@canuck.cygnus.com>
891 * Makefile.in: Delete stuff moved to ../common/Make-common.in.
892 (SIM_{OBJS,EXTRA_LIBS,EXTRA_LIBDEPS,EXTRA_ALL,EXTRA_INSTALL}): Define.
893 (SIM_{EXTRA_CLEAN,EXTRA_CFLAGS}): Define.
894 * configure.in: Simplify using macros in ../common/aclocal.m4.
895 Call AC_CHECK_HEADERS(stdlib.h).
896 * configure: Regenerated.
897 * config.in: New file.
898 * func.c (sim_set_callbacks): Delete, moved to
899 * interf.c (sim_set_callbacks): here.
900 (sim_callback): New global.
901 Rewrite all calls to printf_filtered to go through callback.
902 (sim_size,sim_trace): New functions.
903 (sim_{insert,remove}_breakpoint): #if 0 out.
904 * sis.c: #include "config.h". #include <stdlib.h> if present.
905 (main): Coerce fprintf arg to INIT_DISASSEMBLE_INFO to fprintf_ftype.
906 * sis.h: #include "callback.h".
907 * run.c: Deleted, using one in ../common now.
909 Thu Oct 3 16:12:03 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
911 * Makefile.in (clean): Move config.log to distclean.
913 Wed Oct 2 16:57:57 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
915 * Makefile.in (clean): Also remove config.log.
917 Sat Sep 14 00:00:46 1996 Ian Lance Taylor <ian@cygnus.com>
919 * Makefile.in (CC_FOR_BUILD): New variable.
920 (AR, AR_FLAGS, BISON, MAKEINFO): Remove duplicate variables.
921 (RANLIB, CC): Likewise.
922 (end): Use $(CC_FOR_BUILD), not $(CC).
923 * configure.in: Set CC_FOR_BUILD.
924 * configure: Rebuild.
926 Sun Sep 8 14:04:37 1996 Stu Grossman (grossman@critters.cygnus.com)
928 * erc32.c (port_init): Disable this for __GO32__ (got no pty's
931 Mon Aug 12 17:04:58 1996 Stu Grossman (grossman@critters.cygnus.com)
933 * erc32.c: Don't include sys/ioctl.h or sys/file.h. They aren't
935 * (port_init): Don't even *try* to open pty's under _WIN32.
936 * Use SIM_ADDR, not caddr_t for declaring vars that hold addresses.
937 * float.c: Get rid of #warning. Makes Microsoft C barf.
938 * interf.c (sim_open): Cast fprintf to (fprintf_ftype) to fix
940 * (sim_load sim_create_inferior sim_read): Use prototypes only in
942 * Get rid of enum sim_stop. It's defined in remote-sim.h.
943 * (sim_stop_reason): Define SIGTRAP if _WIN32.
944 * sis.h: Include ansidecl.h and remote-sim.h.
946 Wed Jul 3 16:05:23 1996 Stu Grossman (grossman@critters.cygnus.com)
948 * erc32.c (mec_reset mec_read mec_write memory_read memory_write),
949 sis.h: Get rid of all uses of long long's.
950 * (close_port read_uart write_uart uarta_tx): Don't seg fault
951 when can't open pty's.
952 * exec.c: Add two new instructions: smul, and divscc.
953 * interf.c (flush_windows): New routine to flush the register
954 windows out to the stack just before returning to GDB. Makes
955 backtraces work much better.
957 Wed Jun 26 12:19:11 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
959 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
960 INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
961 (docdir, oldincludedir): Removed.
962 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
963 (AC_PROG_INSTALL): Added.
964 * configure: Rebuilt.
966 Mon Jun 24 14:19:07 1996 Ian Lance Taylor <ian@cygnus.com>
968 * configure.in: Call AC_PROG_CC before running configure.host.
969 * configure: Rebuild with autoconf 2.10.
971 Tue Jun 4 10:37:12 1996 Tom Tromey <tromey@csk3.cygnus.com>
973 * Makefile.in (install): Don't check to see if tooldir exists.
974 Make $(tooldir) and $(tooldir)/bin.
976 Mon Jun 3 12:33:38 1996 Ian Lance Taylor <ian@cygnus.com>
978 * Makefile.in (end.h): Use explicit ./ when running end.
980 Sun May 19 21:05:31 1996 Rob Savoye <rob@chinadoll.cygnus.com>
982 * func.c(bfd_load): Don't try to print the filename if the pfbd is
984 * interf.c(sim_load): Pass the whole string, not just the first
990 * Fixed bug in "go" command.
995 * Fixed bug in interrupt force register (erc32.c).
997 * Change file load function to use bfd_openr.
999 * SIS should now be endian independent.
1001 version 1.8 24-11-95
1002 --------------------
1004 * Fixed FPU timing - some sequences of FPU instructions did not calculate
1005 the resource dependencies right.
1007 * Corrected STDFQ when qne = 0 (again!). The ftt is set to sequence_error
1008 but no FPU trap is generated.
1010 version 1.7.1 31-10-95
1011 --------------------
1013 * Corrected STDFQ when qne = 0. Now, a trap is immidiately generated but
1014 the FPU stays in execute mode.
1016 * Corrected JMPL and RETT timing (these instructions takes two cycles).
1019 version 1.7 25-10-95
1020 --------------------
1022 * Interrupt during annuled instruction corrupted return address - fixed.
1025 version 1.6.2 25-10-95
1026 --------------------
1028 * Added -DFAST_UART to Makefile
1031 version 1.6.1 24-10-95
1032 --------------------
1034 * Fixed bug in STDFQ which caused bus error
1037 version 1.6 02-10-95
1038 --------------------
1040 * Modified srt0.s to include code that initiates registers in IU and FPU
1041 and initializes the data segment. The simulator 'load' command does not
1042 longer initialize the data segment!
1044 * Corrected MEC timer operation; scalers now divide the frequency by
1047 * MEC breakpoints are not checked during store operation
1050 version 1.5 14-09-95
1051 --------------------
1053 * Fixed some bugs in the cycle counting for IU & FPU instructions.
1055 * Fixed bug that allowed an annuled instruction to cause memory exception.
1057 * The *ws parameter in mem.c should now contain the number of waitstates
1058 required by the memory access (was total number of cycles).
1060 * The supplied srt0.s now clears the BSS (thanks Joel).
1062 version 1.4 22-08-95
1063 --------------------
1065 * Added a '-g' switch to enable/disable the GNU readline(), which cause
1066 some problems on solaris 2.x machines.
1068 * Enabled MEC watchpoint and breakpoint function to mem.c. Performance
1069 may suffer a bit ...
1071 NOTE: The UARTs are now connected to /dev/ttypc and /dev/ttypd.
1073 version 1.3 26-07-95
1074 --------------------
1076 * Fixed bug in mulscc instruction (how could that ever have worked?)
1078 * Fixed bug in UART B (flushed characters on UART A), thanks Paul.
1080 version 1.2 13-07-95
1081 --------------------
1083 * Fixed bug in interrupt handling (wrong interrupt selected when more that
1084 one interrupt pending)
1086 * Fixed updating of condition codes during logical instructions (carry and
1087 overflow were not reset)
1089 * Fixed bug in WRTBR (tt field was wrongly over-written)
1091 version 1.1 07-07-95
1092 --------------------
1094 * Fixed several bugs in the interrupt handler and callback routines.
1095 (reported by Paul Warren, Alsys)